From: "Fu, Siyuan" <siyuan.fu@intel.com>
To: "Wu, Jiaxin" <jiaxin.wu@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Long, Qin" <qin.long@intel.com>, "Ye, Ting" <ting.ye@intel.com>,
"Zhang, Lubo" <lubo.zhang@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
Thomas Palmer <thomas.palmer@hpe.com>
Subject: Re: [Patch 01/10] MdePkg: Add TLS related protocol definition
Date: Wed, 14 Dec 2016 08:43:16 +0000 [thread overview]
Message-ID: <B1FF2E9001CE9041BD10B825821D5BC58A884B0A@SHSMSX151.ccr.corp.intel.com> (raw)
In-Reply-To: <1481700859-76060-2-git-send-email-jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
-----Original Message-----
From: Wu, Jiaxin
Sent: 2016年12月14日 15:34
To: edk2-devel@lists.01.org
Cc: Long, Qin <qin.long@intel.com>; Ye, Ting <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Zhang, Lubo <lubo.zhang@intel.com>; Gao, Liming <liming.gao@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>; Thomas Palmer <thomas.palmer@hpe.com>; Wu, Jiaxin <jiaxin.wu@intel.com>
Subject: [Patch 01/10] MdePkg: Add TLS related protocol definition
This patch is used to add Tls.h and TlsConfig.h header files to define EFI TLS Configuration Protocol, EFI TLS Service Binding Protocol and EFI TLS Configuration Protocol.
Cc: Long Qin <qin.long@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
---
MdePkg/Include/Protocol/Tls.h | 460 ++++++++++++++++++++++++++++++++++++
MdePkg/Include/Protocol/TlsConfig.h | 132 +++++++++++
MdePkg/MdePkg.dec | 9 +
3 files changed, 601 insertions(+)
create mode 100644 MdePkg/Include/Protocol/Tls.h create mode 100644 MdePkg/Include/Protocol/TlsConfig.h
diff --git a/MdePkg/Include/Protocol/Tls.h b/MdePkg/Include/Protocol/Tls.h new file mode 100644 index 0000000..51a3cda
--- /dev/null
+++ b/MdePkg/Include/Protocol/Tls.h
@@ -0,0 +1,460 @@
+/** @file
+ EFI TLS Protocols as defined in UEFI 2.5.
+
+ The EFI TLS Service Binding Protocol is used to locate EFI TLS
+ Protocol drivers to create and destroy child of the driver to
+ communicate with other host using TLS protocol.
+ The EFI TLS Protocol provides the ability to manage TLS session.
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> This
+ program and the accompanying materials are licensed and made
+ available under the terms and conditions of the BSD License which
+ accompanies this distribution. The full text of the license may be
+ found at http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is introduced in UEFI Specification 2.5
+
+**/
+
+#ifndef __EFI_TLS_PROTOCOL_H__
+#define __EFI_TLS_PROTOCOL_H__
+
+///
+/// The EFI TLS Service Binding Protocol is used to locate EFI TLS
+Protocol drivers to /// create and destroy child of the driver to
+communicate with other host using TLS /// protocol.
+///
+#define EFI_TLS_SERVICE_BINDING_PROTOCOL_GUID \
+ { \
+ 0x952cb795, 0xff36, 0x48cf, {0xa2, 0x49, 0x4d, 0xf4, 0x86, 0xd6,
+0xab, 0x8d } \
+ }
+
+///
+/// The EFI TLS protocol provides the ability to manage TLS session.
+///
+#define EFI_TLS_PROTOCOL_GUID \
+ { \
+ 0xca959f, 0x6cfa, 0x4db1, {0x95, 0xbc, 0xe4, 0x6c, 0x47, 0x51,
+0x43, 0x90 } \
+ }
+
+typedef struct _EFI_TLS_PROTOCOL EFI_TLS_PROTOCOL;
+
+///
+/// EFI_TLS_SESSION_DATA_TYPE
+///
+typedef enum {
+ ///
+ /// Session Configuration
+ ///
+
+ ///
+ /// TLS session Version. The corresponding Data is of type EFI_TLS_VERSION.
+ ///
+ EfiTlsVersion,
+ ///
+ /// TLS session as client or as server. The corresponding Data is of
+ /// EFI_TLS_CONNECTION_END.
+ ///
+ EfiTlsConnectionEnd,
+ ///
+ /// A priority list of preferred algorithms for the TLS session.
+ /// The corresponding Data is a list of EFI_TLS_CIPHER.
+ ///
+ EfiTlsCipherList,
+ ///
+ /// TLS session compression method.
+ /// The corresponding Data is of type EFI_TLS_COMPRESSION.
+ ///
+ EfiTlsCompressionMethod,
+ ///
+ /// TLS session extension data.
+ /// The corresponding Data is a list of type EFI_TLS_EXTENDION.
+ ///
+ EfiTlsExtensionData,
+ ///
+ /// TLS session verify method.
+ /// The corresponding Data is of type EFI_TLS_VERIFY.
+ ///
+ EfiTlsVerifyMethod,
+ ///
+ /// TLS session data session ID.
+ /// For SetSessionData(), it is TLS session ID used for session resumption.
+ /// For GetSessionData(), it is the TLS session ID used for current session.
+ /// The corresponding Data is of type EFI_TLS_SESSION_ID.
+ ///
+ EfiTlsSessionID,
+ ///
+ /// TLS session data session state.
+ /// The corresponding Data is of type EFI_TLS_SESSION_STATE.
+ ///
+ EfiTlsSessionState,
+
+ ///
+ /// Session information
+ ///
+
+ ///
+ /// TLS session data client random.
+ /// The corresponding Data is of type EFI_TLS_RANDOM.
+ ///
+ EfiTlsClientRandom,
+ ///
+ /// TLS session data server random.
+ /// The corresponding Data is of type EFI_TLS_RANDOM.
+ ///
+ EfiTlsServerRandom,
+ ///
+ /// TLS session data key material.
+ /// The corresponding Data is of type EFI_TLS_MASTER_SECRET.
+ ///
+ EfiTlsKeyMaterial,
+
+ EfiTlsSessionDataTypeMaximum
+
+} EFI_TLS_SESSION_DATA_TYPE;
+
+///
+/// EFI_TLS_VERSION
+/// Note: The TLS version definition is from SSL3.0 to the latest TLS (e.g. 1.2).
+/// SSL2.0 is obsolete and should not be used.
+///
+typedef struct {
+ UINT8 Major;
+ UINT8 Minor;
+} EFI_TLS_VERSION;
+
+///
+/// EFI_TLS_CONNECTION_END to define TLS session as client or server.
+///
+typedef enum {
+ EfiTlsClient,
+ EfiTlsServer,
+} EFI_TLS_CONNECTION_END;
+
+///
+/// EFI_TLS_CIPHER
+/// Note: The definition of EFI_TLS_CIPHER definition is from "RFC 5246, A.4.1.
+/// Hello Messages". The value of EFI_TLS_CIPHER is from TLS Cipher
+/// Suite Registry of IANA.
+///
+typedef struct {
+ UINT8 Data1;
+ UINT8 Data2;
+} EFI_TLS_CIPHER;
+
+///
+/// EFI_TLS_COMPRESSION
+/// Note: The value of EFI_TLS_COMPRESSION definition is from "RFC 3749".
+///
+typedef UINT8 EFI_TLS_COMPRESSION;
+
+///
+/// EFI_TLS_EXTENSION
+/// Note: The definition of EFI_TLS_EXTENSION if from "RFC 5246 A.4.1.
+/// Hello Messages".
+///
+typedef struct {
+ UINT16 ExtensionType;
+ UINT16 Length;
+ UINT8 Data[1];
+} EFI_TLS_EXTENSION;
+
+///
+/// EFI_TLS_VERIFY
+/// Use either EFI_TLS_VERIFY_NONE or EFI_TLS_VERIFY_PEER, the last two
+options /// are 'ORed' with EFI_TLS_VERIFY_PEER if they are desired.
+///
+typedef UINT32 EFI_TLS_VERIFY;
+///
+/// No certificates will be sent or the TLS/SSLhandshake will be
+continued regardless /// of the certificate verification result.
+///
+#define EFI_TLS_VERIFY_NONE 0x0
+///
+/// The TLS/SSL handshake is immediately terminated with an alert
+message containing /// the reason for the certificate verification failure.
+///
+#define EFI_TLS_VERIFY_PEER 0x1
+///
+/// TLS session will fail peer certificate is absent.
+///
+#define EFI_TLS_VERIFY_FAIL_IF_NO_PEER_CERT 0x2 /// /// TLS session
+only verify client once, and doesn't request cerfificate during ///
+re-negotiation.
+///
+#define EFI_TLS_VERIFY_CLIENT_ONCE 0x4
+
+///
+/// EFI_TLS_RANDOM
+/// Note: The definition of EFI_TLS_RANDOM is from "RFC 5246 A.4.1.
+/// Hello Messages".
+///
+typedef struct {
+ UINT32 GmtUnixTime;
+ UINT8 RandomBytes[28];
+} EFI_TLS_RANDOM;
+
+///
+/// EFI_TLS_MASTER_SECRET
+/// Note: The definition of EFI_TLS_MASTER_SECRET is from "RFC 5246 8.1.
+/// Computing the Master Secret".
+///
+typedef struct {
+ UINT8 Data[48];
+} EFI_TLS_MASTER_SECRET;
+
+///
+/// EFI_TLS_SESSION_ID
+/// Note: The definition of EFI_TLS_SESSION_ID is from "RFC 5246 A.4.1. Hello Messages".
+///
+#define MAX_TLS_SESSION_ID_LENGTH 32
+typedef struct {
+ UINT16 Length;
+ UINT8 Data[MAX_TLS_SESSION_ID_LENGTH];
+} EFI_TLS_SESSION_ID;
+
+///
+/// EFI_TLS_SESSION_STATE
+///
+typedef enum {
+ ///
+ /// When a new child of TLS protocol is created, the initial state of
+TLS session
+ /// is EfiTlsSessionNotStarted.
+ ///
+ EfiTlsSessionNotStarted,
+ ///
+ /// The consumer can call BuildResponsePacket() with NULL to get
+ClientHello to
+ /// start the TLS session. Then the status is EfiTlsSessionHandShaking.
+ ///
+ EfiTlsSessionHandShaking,
+ ///
+ /// During handshake, the consumer need call BuildResponsePacket()
+with input
+ /// data from peer, then get response packet and send to peer. After
+handshake
+ /// finish, the TLS session status becomes
+EfiTlsSessionDataTransferring, and
+ /// consumer can use ProcessPacket() for data transferring.
+ ///
+ EfiTlsSessionDataTransferring,
+ ///
+ /// Finally, if consumer wants to active close TLS session, consumer
+need
+ /// call SetSessionData to set TLS session state to
+EfiTlsSessionClosing, and
+ /// call BuildResponsePacket() with NULL to get CloseNotify alert
+message,
+ /// and sent it out.
+ ///
+ EfiTlsSessionClosing,
+ ///
+ /// If any error happen during parsing ApplicationData content type,
+EFI_ABORT
+ /// will be returned by ProcessPacket(), and TLS session state will
+become
+ /// EfiTlsSessionError. Then consumer need call BuildResponsePacket()
+with
+ /// NULL to get alert message and sent it out.
+ ///
+ EfiTlsSessionError,
+
+ EfiTlsSessionStateMaximum
+
+} EFI_TLS_SESSION_STATE;
+
+///
+/// EFI_TLS_FRAGMENT_DATA
+///
+typedef struct {
+ ///
+ /// Length of data buffer in the fragment.
+ ///
+ UINT32 FragmentLength;
+ ///
+ /// Pointer to the data buffer in the fragment.
+ ///
+ VOID *FragmentBuffer;
+} EFI_TLS_FRAGMENT_DATA;
+
+///
+/// EFI_TLS_CRYPT_MODE
+///
+typedef enum {
+ ///
+ /// Encrypt data provided in the fragment buffers.
+ ///
+ EfiTlsEncrypt,
+ ///
+ /// Decrypt data provided in the fragment buffers.
+ ///
+ EfiTlsDecrypt,
+} EFI_TLS_CRYPT_MODE;
+
+/**
+ Set TLS session data.
+
+ The SetSessionData() function set data for a new TLS session. All
+ session data should be set before BuildResponsePacket() invoked.
+
+ @param[in] This Pointer to the EFI_TLS_PROTOCOL instance.
+ @param[in] DataType TLS session data type.
+ @param[in] Data Pointer to session data.
+ @param[in] DataSize Total size of session data.
+
+ @retval EFI_SUCCESS The TLS session data is set successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Data is NULL.
+ DataSize is 0.
+ @retval EFI_UNSUPPORTED The DataType is unsupported.
+ @retval EFI_ACCESS_DENIED If the DataType is one of below:
+ EfiTlsClientRandom
+ EfiTlsServerRandom
+ EfiTlsKeyMaterial
+ @retval EFI_NOT_READY Current TLS session state is NOT
+ EfiTlsSessionStateNotStarted.
+ @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TLS_SET_SESSION_DATA) (
+ IN EFI_TLS_PROTOCOL *This,
+ IN EFI_TLS_SESSION_DATA_TYPE DataType,
+ IN VOID *Data,
+ IN UINTN DataSize
+ );
+
+/**
+ Get TLS session data.
+
+ The GetSessionData() function return the TLS session information.
+
+ @param[in] This Pointer to the EFI_TLS_PROTOCOL instance.
+ @param[in] DataType TLS session data type.
+ @param[in, out] Data Pointer to session data.
+ @param[in, out] DataSize Total size of session data. On input, it means
+ the size of Data buffer. On output, it means the size
+ of copied Data buffer if EFI_SUCCESS, and means the
+ size of desired Data buffer if EFI_BUFFER_TOO_SMALL.
+
+ @retval EFI_SUCCESS The TLS session data is got successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ DataSize is NULL.
+ Data is NULL if *DataSize is not zero.
+ @retval EFI_UNSUPPORTED The DataType is unsupported.
+ @retval EFI_NOT_FOUND The TLS session data is not found.
+ @retval EFI_NOT_READY The DataType is not ready in current session state.
+ @retval EFI_BUFFER_TOO_SMALL The buffer is too small to hold the data.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TLS_GET_SESSION_DATA) (
+ IN EFI_TLS_PROTOCOL *This,
+ IN EFI_TLS_SESSION_DATA_TYPE DataType,
+ IN OUT VOID *Data, OPTIONAL
+ IN OUT UINTN *DataSize
+ );
+
+/**
+ Build response packet according to TLS state machine. This function
+is only valid for
+ alert, handshake and change_cipher_spec content type.
+
+ The BuildResponsePacket() function builds TLS response packet in
+ response to the TLS request packet specified by RequestBuffer and
+ RequestSize. If RequestBuffer is NULL and RequestSize is 0, and TLS
+ session status is EfiTlsSessionNotStarted, the TLS session will be
+ initiated and the response packet needs to be ClientHello. If
+ RequestBuffer is NULL and RequestSize is 0, and TLS session status is
+ EfiTlsSessionClosing, the TLS session will be closed and response
+ packet needs to be CloseNotify. If RequestBuffer is NULL and
+ RequestSize is 0, and TLS session status is EfiTlsSessionError, the TLS session has errors and the response packet needs to be Alert message based on error type.
+
+ @param[in] This Pointer to the EFI_TLS_PROTOCOL instance.
+ @param[in] RequestBuffer Pointer to the most recently received TLS packet. NULL
+ means TLS need initiate the TLS session and response
+ packet need to be ClientHello.
+ @param[in] RequestSize Packet size in bytes for the most recently received TLS
+ packet. 0 is only valid when RequestBuffer is NULL.
+ @param[out] Buffer Pointer to the buffer to hold the built packet.
+ @param[in, out] BufferSize Pointer to the buffer size in bytes. On input, it is
+ the buffer size provided by the caller. On output, it
+ is the buffer size in fact needed to contain the
+ packet.
+
+ @retval EFI_SUCCESS The required TLS packet is built successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ RequestBuffer is NULL but RequestSize is NOT 0.
+ RequestSize is 0 but RequestBuffer is NOT NULL.
+ BufferSize is NULL.
+ Buffer is NULL if *BufferSize is not zero.
+ @retval EFI_BUFFER_TOO_SMALL BufferSize is too small to hold the response packet.
+ @retval EFI_NOT_READY Current TLS session state is NOT ready to build
+ ResponsePacket.
+ @retval EFI_ABORTED Something wrong build response packet.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TLS_BUILD_RESPONSE_PACKET) (
+ IN EFI_TLS_PROTOCOL *This,
+ IN UINT8 *RequestBuffer, OPTIONAL
+ IN UINTN RequestSize, OPTIONAL
+ OUT UINT8 *Buffer, OPTIONAL
+ IN OUT UINTN *BufferSize
+ );
+
+/**
+ Decrypt or encrypt TLS packet during session. This function is only
+valid after
+ session connected and for application_data content type.
+
+ The ProcessPacket () function process each inbound or outbound TLS APP packet.
+
+ @param[in] This Pointer to the EFI_TLS_PROTOCOL instance.
+ @param[in, out] FragmentTable Pointer to a list of fragment. The caller will take
+ responsible to handle the original FragmentTable while
+ it may be reallocated in TLS driver. If CryptMode is
+ EfiTlsEncrypt, on input these fragments contain the TLS
+ header and plain text TLS APP payload; on output these
+ fragments contain the TLS header and cypher text TLS
+ APP payload. If CryptMode is EfiTlsDecrypt, on input
+ these fragments contain the TLS header and cypher text
+ TLS APP payload; on output these fragments contain the
+ TLS header and plain text TLS APP payload.
+ @param[in] FragmentCount Number of fragment.
+ @param[in] CryptMode Crypt mode.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ FragmentTable is NULL.
+ FragmentCount is NULL.
+ CryptoMode is invalid.
+ @retval EFI_NOT_READY Current TLS session state is NOT
+ EfiTlsSessionDataTransferring.
+ @retval EFI_ABORTED Something wrong decryption the message. TLS session
+ status will become EfiTlsSessionError. The caller need
+ call BuildResponsePacket() to generate Error Alert
+ message and send it out.
+ @retval EFI_OUT_OF_RESOURCES No enough resource to finish the operation.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TLS_PROCESS_PACKET) (
+ IN EFI_TLS_PROTOCOL *This,
+ IN OUT EFI_TLS_FRAGMENT_DATA **FragmentTable,
+ IN UINT32 *FragmentCount,
+ IN EFI_TLS_CRYPT_MODE CryptMode
+ );
+
+///
+/// The EFI_TLS_PROTOCOL is used to create, destroy and manage TLS session.
+/// For detail of TLS, please refer to TLS related RFC.
+///
+struct _EFI_TLS_PROTOCOL {
+ EFI_TLS_SET_SESSION_DATA SetSessionData;
+ EFI_TLS_GET_SESSION_DATA GetSessionData;
+ EFI_TLS_BUILD_RESPONSE_PACKET BuildResponsePacket;
+ EFI_TLS_PROCESS_PACKET ProcessPacket;
+};
+
+extern EFI_GUID gEfiTlsServiceBindingProtocolGuid;
+extern EFI_GUID gEfiTlsProtocolGuid;
+
+#endif // __EFI_TLS_PROTOCOL_H__
diff --git a/MdePkg/Include/Protocol/TlsConfig.h b/MdePkg/Include/Protocol/TlsConfig.h
new file mode 100644
index 0000000..4b62bf5
--- /dev/null
+++ b/MdePkg/Include/Protocol/TlsConfig.h
@@ -0,0 +1,132 @@
+/** @file
+ EFI TLS Configuration Protocol as defined in UEFI 2.5.
+ The EFI TLS Configuration Protocol provides a way to set and get TLS configuration.
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> This
+ program and the accompanying materials are licensed and made
+ available under the terms and conditions of the BSD License which
+ accompanies this distribution. The full text of the license may be
+ found at http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is introduced in UEFI Specification 2.5
+
+**/
+#ifndef __EFI_TLS_CONFIGURATION_PROTOCOL_H__
+#define __EFI_TLS_CONFIGURATION_PROTOCOL_H__
+
+///
+/// The EFI Configuration protocol provides a way to set and get TLS configuration.
+///
+#define EFI_TLS_CONFIGURATION_PROTOCOL_GUID \
+ { \
+ 0x1682fe44, 0xbd7a, 0x4407, { 0xb7, 0xc7, 0xdc, 0xa3, 0x7c, 0xa3,
+0x92, 0x2d } \
+ }
+
+typedef struct _EFI_TLS_CONFIGURATION_PROTOCOL
+EFI_TLS_CONFIGURATION_PROTOCOL;
+
+///
+/// EFI_TLS_CONFIG_DATA_TYPE
+///
+typedef enum {
+ ///
+ /// Local host configuration data: public certificate data.
+ /// This data should be DER-encoded binaryX.509 certificate
+ /// or PEMencoded X.509 certificate.
+ ///
+ EfiTlsConfigDataTypeHostPublicCert,
+ ///
+ /// Local host configuration data: private key data.
+ ///
+ EfiTlsConfigDataTypeHostPrivateKey,
+ ///
+ /// CA certificate to verify peer. This data should be PEM-encoded
+ /// RSA or PKCS#8 private key.
+ ///
+ EfiTlsConfigDataTypeCACertificate,
+ ///
+ /// CA-supplied Certificate Revocation List data. This data should
+ /// be DER-encoded CRL data.
+ ///
+ EfiTlsConfigDataTypeCertRevocationList,
+
+ EfiTlsConfigDataTypeMaximum
+
+} EFI_TLS_CONFIG_DATA_TYPE;
+
+/**
+ Set TLS configuration data.
+
+ The SetData() function sets TLS configuration to non-volatile storage
+ or volatile storage.
+
+ @param[in] This Pointer to the EFI_TLS_CONFIGURATION_PROTOCOL instance.
+ @param[in] DataType Configuration data type.
+ @param[in] Data Pointer to configuration data.
+ @param[in] DataSize Total size of configuration data.
+
+ @retval EFI_SUCCESS The TLS configuration data is set successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ Data is NULL.
+ DataSize is 0.
+ @retval EFI_UNSUPPORTED The DataType is unsupported.
+ @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TLS_CONFIGURATION_SET_DATA)(
+ IN EFI_TLS_CONFIGURATION_PROTOCOL *This,
+ IN EFI_TLS_CONFIG_DATA_TYPE DataType,
+ IN VOID *Data,
+ IN UINTN DataSize
+ );
+
+/**
+ Get TLS configuration data.
+
+ The GetData() function gets TLS configuration.
+
+ @param[in] This Pointer to the EFI_TLS_CONFIGURATION_PROTOCOL instance.
+ @param[in] DataType Configuration data type.
+ @param[in, out] Data Pointer to configuration data.
+ @param[in, out] DataSize Total size of configuration data. On input, it means
+ the size of Data buffer. On output, it means the size
+ of copied Data buffer if EFI_SUCCESS, and means the
+ size of desired Data buffer if EFI_BUFFER_TOO_SMALL.
+
+ @retval EFI_SUCCESS The TLS configuration data is got successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ This is NULL.
+ DataSize is NULL.
+ Data is NULL if *DataSize is not zero.
+ @retval EFI_UNSUPPORTED The DataType is unsupported.
+ @retval EFI_NOT_FOUND The TLS configuration data is not found.
+ @retval EFI_BUFFER_TOO_SMALL The buffer is too small to hold the data.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_TLS_CONFIGURATION_GET_DATA)(
+ IN EFI_TLS_CONFIGURATION_PROTOCOL *This,
+ IN EFI_TLS_CONFIG_DATA_TYPE DataType,
+ IN OUT VOID *Data, OPTIONAL
+ IN OUT UINTN *DataSize
+ );
+
+///
+/// The EFI_TLS_CONFIGURATION_PROTOCOL is designed to provide a way to
+set and get /// TLS configuration, such as Certificate, private key data.
+///
+struct _EFI_TLS_CONFIGURATION_PROTOCOL {
+ EFI_TLS_CONFIGURATION_SET_DATA SetData;
+ EFI_TLS_CONFIGURATION_GET_DATA GetData;
+};
+
+extern EFI_GUID gEfiTlsConfigurationProtocolGuid;
+
+#endif //__EFI_TLS_CONFIGURATION_PROTOCOL_H__
diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec index 3e08bed..f2bdb30 100644
--- a/MdePkg/MdePkg.dec
+++ b/MdePkg/MdePkg.dec
@@ -1607,10 +1607,19 @@
gEfiHttpProtocolGuid = { 0x7a59b29b, 0x910b, 0x4171, {0x82, 0x42, 0xa8, 0x5a, 0x0d, 0xf2, 0x5b, 0x5b }}
## Include/Protocol/HttpUtilities.h
gEfiHttpUtilitiesProtocolGuid = { 0x3e35c163, 0x4074, 0x45dd, {0x43, 0x1e, 0x23, 0x98, 0x9d, 0xd8, 0x6b, 0x32 }}
+ ## Include/Protocol/Tls.h
+ gEfiTlsServiceBindingProtocolGuid = { 0x952cb795, 0xff36, 0x48cf, {0xa2, 0x49, 0x4d, 0xf4, 0x86, 0xd6, 0xab, 0x8d }}
+
+ ## Include/Protocol/Tls.h
+ gEfiTlsProtocolGuid = { 0xca959f, 0x6cfa, 0x4db1, {0x95, 0xbc, 0xe4, 0x6c, 0x47, 0x51, 0x43, 0x90 }}
+
+ ## Include/Protocol/TlsConfig.h
+ gEfiTlsConfigurationProtocolGuid = { 0x1682fe44, 0xbd7a, 0x4407, { 0xb7, 0xc7, 0xdc, 0xa3, 0x7c, 0xa3, 0x92, 0x2d }}
+
## Include/Protocol/Rest.h
gEfiRestProtocolGuid = { 0x0db48a36, 0x4e54, 0xea9c, {0x9b, 0x09, 0x1e, 0xa5, 0xbe, 0x3a, 0x66, 0x0b }}
## Include/Protocol/Supplicant.h
gEfiSupplicantServiceBindingProtocolGuid = { 0x45bcd98e, 0x59ad, 0x4174, { 0x95, 0x46, 0x34, 0x4a, 0x7, 0x48, 0x58, 0x98 }}
--
1.9.5.msysgit.1
next prev parent reply other threads:[~2016-12-14 8:43 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-14 7:34 [Patch 00/10] Sync staging/HTTPS-TLS feature into edk2 master Jiaxin Wu
2016-12-14 7:34 ` [Patch 01/10] MdePkg: Add TLS related protocol definition Jiaxin Wu
2016-12-14 8:36 ` Long, Qin
2016-12-14 8:39 ` Wu, Jiaxin
2016-12-15 8:34 ` Ye, Ting
2016-12-14 8:43 ` Fu, Siyuan [this message]
2016-12-14 7:34 ` [Patch 02/10] MdePkg: Add a header to standardize TLS definitions Jiaxin Wu
2016-12-14 8:42 ` Long, Qin
2016-12-14 8:43 ` Fu, Siyuan
2016-12-15 8:35 ` Ye, Ting
2016-12-14 7:34 ` [Patch 03/10] CryptoPkg: Enable ssl build in OpensslLib directly Jiaxin Wu
2016-12-15 8:37 ` Ye, Ting
2016-12-14 7:34 ` [Patch 04/10] CryptoPkg: Add new TlsLib library Jiaxin Wu
2016-12-16 2:10 ` Ye, Ting
2016-12-16 2:51 ` Wu, Jiaxin
2016-12-14 7:34 ` [Patch 05/10] NetworkPkg/TlsDxe: TlsDxe driver implementation over OpenSSL Jiaxin Wu
2016-12-14 8:41 ` Fu, Siyuan
2016-12-15 7:24 ` Wu, Jiaxin
2016-12-14 7:34 ` [Patch 06/10] NetworkPkg/TlsAuthConfigDxe: Provide the UI to support TLS auth configuration Jiaxin Wu
2016-12-15 2:22 ` Fu, Siyuan
2016-12-22 2:52 ` Ye, Ting
2016-12-22 3:13 ` Wu, Jiaxin
2016-12-14 7:34 ` [Patch 07/10] NetworkPkg/HttpDxe: HTTPS support over IPv4 and IPv6 Jiaxin Wu
2016-12-15 2:39 ` Fu, Siyuan
2016-12-15 7:14 ` Wu, Jiaxin
2016-12-22 7:33 ` Ye, Ting
2016-12-22 8:30 ` Wu, Jiaxin
2016-12-14 7:34 ` [Patch 08/10] NetworkPkg/NetworkPkg.dsc: Enable TlsDxe and TlsAuthConfigDxe module Jiaxin Wu
2016-12-15 2:39 ` Fu, Siyuan
2016-12-22 7:37 ` Ye, Ting
2016-12-14 7:34 ` [Patch 09/10] Nt32Pkg/Nt32Pkg.dsc: Remove the flag for OpensslLib and BaseCryptLib Jiaxin Wu
2016-12-14 7:56 ` Ni, Ruiyu
2016-12-15 8:25 ` Long, Qin
2016-12-22 7:39 ` Ye, Ting
2016-12-14 7:34 ` [Patch 10/10] Nt32Pkg: Enable HTTPS boot feature for Nt32 platform Jiaxin Wu
2016-12-14 7:44 ` Yao, Jiewen
2016-12-14 7:46 ` Wu, Jiaxin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B1FF2E9001CE9041BD10B825821D5BC58A884B0A@SHSMSX151.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox