From: "Fu, Siyuan" <siyuan.fu@intel.com>
To: "Wu, Jiaxin" <jiaxin.wu@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Ye, Ting" <ting.ye@intel.com>, "Wu, Jiaxin" <jiaxin.wu@intel.com>
Subject: Re: [Patch] MdeModulePkg/Ip4Dxe: Trigger Ip4Config2 to retrieve the default address.
Date: Wed, 25 Oct 2017 09:07:29 +0000 [thread overview]
Message-ID: <B1FF2E9001CE9041BD10B825821D5BC58B3CEDAB@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1508482259-21688-1-git-send-email-jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Jiaxin Wu
> Sent: Friday, October 20, 2017 2:51 PM
> To: edk2-devel@lists.01.org
> Cc: Ye, Ting <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Wu,
> Jiaxin <jiaxin.wu@intel.com>
> Subject: [edk2] [Patch] MdeModulePkg/Ip4Dxe: Trigger Ip4Config2 to
> retrieve the default address.
>
> According the UEFI spec 2.7 A:
> In section 28.3.2 for the IpConfigData.UseDefaultAddress, "While set to
> TRUE, Configure() will trigger the EFI_IP4_CONFIG2_PROTOCOL to retrieve
> the default IPv4 address if it is not available yet."
> In section 28.5 for the Ip4Config2PolicyDhcp, "...All of these
> configurations
> are retrieved from DHCP server or other auto-configuration mechanism."
>
> This patch is to align with the above description. When the default IPv4
> address is not available and IpConfigData.UseDefaultAddress is set to TRUE,
> Ip4Config2 protocol will be called to retrieve the default address by
> setting
> the policy to Ip4Config2PolicyDhcp.
>
> Cc: Ye Ting <ting.ye@intel.com>
> Cc: Fu Siyuan <siyuan.fu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
> ---
> MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c | 25
> +++++++++++++++++++++----
> 1 file changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> index 3cdf8ec..fc5812e 100644
> --- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> +++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> @@ -594,13 +594,17 @@ Ip4ConfigProtocol (
> IP4_INTERFACE *IpIf;
> EFI_STATUS Status;
> IP4_ADDR Ip;
> IP4_ADDR Netmask;
> EFI_ARP_PROTOCOL *Arp;
> + EFI_IP4_CONFIG2_PROTOCOL *Ip4Config2;
> + EFI_IP4_CONFIG2_POLICY Policy;
>
> IpSb = IpInstance->Service;
>
> + Ip4Config2 = NULL;
> +
> //
> // User is changing packet filters. It must be stopped
> // before the station address can be changed.
> //
> if (IpInstance->State == IP4_STATE_CONFIGED) {
> @@ -675,14 +679,27 @@ Ip4ConfigProtocol (
> } else {
> //
> // Use the default address. Check the state.
> //
> if (IpSb->State == IP4_SERVICE_UNSTARTED) {
> - Status = Ip4StartAutoConfig (&IpSb->Ip4Config2Instance);
> -
> - if (EFI_ERROR (Status)) {
> - goto ON_ERROR;
> + //
> + // Trigger the EFI_IP4_CONFIG2_PROTOCOL to retrieve the
> + // default IPv4 address if it is not available yet.
> + //
> + Policy = IpSb->Ip4Config2Instance.Policy;
> + if (Policy != Ip4Config2PolicyDhcp) {
> + Ip4Config2 = &IpSb->Ip4Config2Instance.Ip4Config2;
> + Policy = Ip4Config2PolicyDhcp;
> + Status= Ip4Config2->SetData (
> + Ip4Config2,
> + Ip4Config2DataTypePolicy,
> + sizeof (EFI_IP4_CONFIG2_POLICY),
> + &Policy
> + );
> + if (EFI_ERROR (Status)) {
> + goto ON_ERROR;
> + }
> }
> }
>
> IpIf = IpSb->DefaultInterface;
> NET_GET_REF (IpSb->DefaultInterface);
> --
> 1.9.5.msysgit.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
prev parent reply other threads:[~2017-10-25 9:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-20 6:50 [Patch] MdeModulePkg/Ip4Dxe: Trigger Ip4Config2 to retrieve the default address Jiaxin Wu
2017-10-25 9:07 ` Fu, Siyuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B1FF2E9001CE9041BD10B825821D5BC58B3CEDAB@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox