public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Fu, Siyuan" <siyuan.fu@intel.com>
To: "Wang, Fan" <fan.wang@intel.com>,
	"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Ye, Ting" <ting.ye@intel.com>, "Wu, Jiaxin" <jiaxin.wu@intel.com>
Subject: Re: [Patch] MdeModulePkg/Ip4Dxe: Add an independent timer for reconfig checking
Date: Fri, 12 Jan 2018 00:50:08 +0000	[thread overview]
Message-ID: <B1FF2E9001CE9041BD10B825821D5BC58B410068@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1515666006-5488-1-git-send-email-fan.wang@intel.com>



Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>

> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Wang Fan
> Sent: Thursday, January 11, 2018 6:20 PM
> To: edk2-devel@lists.01.org
> Cc: Ye, Ting <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Wu,
> Jiaxin <jiaxin.wu@intel.com>
> Subject: [edk2] [Patch] MdeModulePkg/Ip4Dxe: Add an independent timer for
> reconfig checking
> 
> * Since wireless network can switch at very short time, the time interval
>   of reconfig event checking is too long for this case. To achieve better
>   performance and scalability, separate this task from Ip4 tick timer.
> 
> Cc: Jiaxin Wu <jiaxin.wu@intel.com>
> Cc: Ye Ting <ting.ye@intel.com>
> Cc: Fu Siyuan <siyuan.fu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Wang Fan <fan.wang@intel.com>
> ---
>  MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Driver.c | 28 +++++++++++++-
>  MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c   | 47 +++++++++++++++---
> -----
>  MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.h   | 30 ++++++++++++---
>  3 files changed, 83 insertions(+), 22 deletions(-)
> 
> diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Driver.c
> b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Driver.c
> index 49b7dc5..552c4e1 100644
> --- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Driver.c
> +++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Driver.c
> @@ -1,9 +1,9 @@
>  /** @file
>    The driver binding and service binding protocol for IP4 driver.
> 
> -Copyright (c) 2005 - 2017, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>
>  (C) Copyright 2015 Hewlett-Packard Development Company, L.P.<BR>
> 
>  This program and the accompanying materials
>  are licensed and made available under the terms and conditions of the BSD
> License
>  which accompanies this distribution.  The full text of the license may be
> found at
> @@ -251,10 +251,11 @@ Ip4CreateService (
>    IpSb->MnpConfigData.DisableBackgroundPolling  = FALSE;
> 
>    ZeroMem (&IpSb->SnpMode, sizeof (EFI_SIMPLE_NETWORK_MODE));
> 
>    IpSb->Timer = NULL;
> +  IpSb->ReconfigCheckTimer = NULL;
> 
>    IpSb->ReconfigEvent = NULL;
> 
>    IpSb->Reconfig = FALSE;
> 
> @@ -283,10 +284,22 @@ Ip4CreateService (
>    if (EFI_ERROR (Status)) {
>      goto ON_ERROR;
>    }
> 
>    Status = gBS->CreateEvent (
> +                  EVT_NOTIFY_SIGNAL | EVT_TIMER,
> +                  TPL_CALLBACK,
> +                  Ip4TimerReconfigChecking,
> +                  IpSb,
> +                  &IpSb->ReconfigCheckTimer
> +                  );
> +
> +  if (EFI_ERROR (Status)) {
> +    goto ON_ERROR;
> +  }
> +
> +  Status = gBS->CreateEvent (
>                    EVT_NOTIFY_SIGNAL,
>                    TPL_NOTIFY,
>                    Ip4AutoReconfigCallBack,
>                    IpSb,
>                    &IpSb->ReconfigEvent
> @@ -408,10 +421,17 @@ Ip4CleanService (
>      gBS->CloseEvent (IpSb->Timer);
> 
>      IpSb->Timer = NULL;
>    }
> 
> +  if (IpSb->ReconfigCheckTimer != NULL) {
> +    gBS->SetTimer (IpSb->ReconfigCheckTimer, TimerCancel, 0);
> +    gBS->CloseEvent (IpSb->ReconfigCheckTimer);
> +
> +    IpSb->ReconfigCheckTimer = NULL;
> +  }
> +
>    if (IpSb->DefaultInterface != NULL) {
>      Status = Ip4FreeInterface (IpSb->DefaultInterface, NULL);
> 
>      if (EFI_ERROR (Status)) {
>        return Status;
> @@ -628,10 +648,16 @@ Ip4DriverBindingStart (
> 
>    if (EFI_ERROR (Status)) {
>      goto UNINSTALL_PROTOCOL;
>    }
> 
> +  Status = gBS->SetTimer (IpSb->ReconfigCheckTimer, TimerPeriodic, 500 *
> TICKS_PER_MS);
> +
> +  if (EFI_ERROR (Status)) {
> +    goto UNINSTALL_PROTOCOL;
> +  }
> +
>    //
>    // Initialize the IP4 ID
>    //
>    mIp4Id = (UINT16)NET_RANDOM (NetRandomInitSeed ());
> 
> diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> index ac48ad2..b5cd7b7 100644
> --- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> +++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
> @@ -1,8 +1,8 @@
>  /** @file
> 
> -Copyright (c) 2005 - 2017, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>
>  This program and the accompanying materials
>  are licensed and made available under the terms and conditions of the BSD
> License
>  which accompanies this distribution.  The full text of the license may be
> found at
>  http://opensource.org/licenses/bsd-license.php
> 
> @@ -2247,22 +2247,14 @@ Ip4SentPacketTicking (
>    }
> 
>    return EFI_SUCCESS;
>  }
> 
> -
>  /**
> -  There are two steps for this the heart beat timer of IP4 service
> instance.
> -  First, it times out all of its IP4 children's received-but-not-
> delivered
> -  and transmitted-but-not-recycle packets, and provides time input for
> its
> -  IGMP protocol.
> -  Second, a dedicated timer is used to poll underlying media status. In
> case
> -  of cable swap, a new round auto configuration will be initiated. The
> timer
> -  will signal the IP4 to run DHCP configuration again. IP4 driver will
> free
> -  old IP address related resource, such as route table and Interface,
> then
> -  initiate a DHCP process to acquire new IP, eventually create route
> table
> -  for new IP address.
> +  This heart beat timer of IP4 service instance times out all of its IP4
> children's
> +  received-but-not-delivered and transmitted-but-not-recycle packets, and
> provides
> +  time input for its IGMP protocol.
> 
>    @param[in]  Event                  The IP4 service instance's heart
> beat timer.
>    @param[in]  Context                The IP4 service instance.
> 
>  **/
> @@ -2272,22 +2264,47 @@ Ip4TimerTicking (
>    IN EFI_EVENT              Event,
>    IN VOID                   *Context
>    )
>  {
>    IP4_SERVICE               *IpSb;
> +
> +  IpSb = (IP4_SERVICE *) Context;
> +  NET_CHECK_SIGNATURE (IpSb, IP4_SERVICE_SIGNATURE);
> +
> +  Ip4PacketTimerTicking (IpSb);
> +  Ip4IgmpTicking (IpSb);
> +}
> +
> +/**
> +  This dedicated timer is used to poll underlying network media status.
> In case
> +  of cable swap or wireless network switch, a new round auto
> configuration will
> +  be initiated. The timer will signal the IP4 to run DHCP configuration
> again.
> +  IP4 driver will free old IP address related resource, such as route
> table and
> +  Interface, then initiate a DHCP process to acquire new IP, eventually
> create
> +  route table for new IP address.
> +
> +  @param[in]  Event                  The IP4 service instance's heart
> beat timer.
> +  @param[in]  Context                The IP4 service instance.
> +
> +**/
> +VOID
> +EFIAPI
> +Ip4TimerReconfigChecking (
> +  IN EFI_EVENT              Event,
> +  IN VOID                   *Context
> +  )
> +{
> +  IP4_SERVICE               *IpSb;
>    BOOLEAN                   OldMediaPresent;
>    EFI_STATUS                Status;
>    EFI_SIMPLE_NETWORK_MODE   SnpModeData;
> 
>    IpSb = (IP4_SERVICE *) Context;
>    NET_CHECK_SIGNATURE (IpSb, IP4_SERVICE_SIGNATURE);
> 
>    OldMediaPresent = IpSb->MediaPresent;
> 
> -  Ip4PacketTimerTicking (IpSb);
> -  Ip4IgmpTicking (IpSb);
> -
>    //
>    // Get fresh mode data from MNP, since underlying media status may
> change.
>    // Here, it needs to mention that the MediaPresent can also be checked
> even if
>    // EFI_NOT_STARTED returned while this MNP child driver instance isn't
> configured.
>    //
> diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.h
> b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.h
> index f6b4047..8bdc39a 100644
> --- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.h
> +++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.h
> @@ -1,9 +1,9 @@
>  /** @file
>    Ip4 internal functions and type defintions.
> 
> -Copyright (c) 2005 - 2017, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>
>  (C) Copyright 2015 Hewlett-Packard Development Company, L.P.<BR>
> 
>  This program and the accompanying materials
>  are licensed and made available under the terms and conditions of the BSD
> License
>  which accompanies this distribution.  The full text of the license may be
> found at
> @@ -204,11 +204,11 @@ struct _IP4_SERVICE {
> 
>    EFI_MANAGED_NETWORK_CONFIG_DATA MnpConfigData;
>    EFI_SIMPLE_NETWORK_MODE         SnpMode;
> 
>    EFI_EVENT                       Timer;
> -
> +  EFI_EVENT                       ReconfigCheckTimer;
>    EFI_EVENT                       ReconfigEvent;
> 
>    BOOLEAN                         Reconfig;
> 
>    //
> @@ -332,14 +332,13 @@ Ip4Groups (
>    IN BOOLEAN                JoinFlag,
>    IN EFI_IPv4_ADDRESS       *GroupAddress       OPTIONAL
>    );
> 
>  /**
> -  The heart beat timer of IP4 service instance. It times out
> -  all of its IP4 children's received-but-not-delivered and
> -  transmitted-but-not-recycle packets, and provides time input
> -  for its IGMP protocol.
> +  This heart beat timer of IP4 service instance times out all of its IP4
> children's
> +  received-but-not-delivered and transmitted-but-not-recycle packets, and
> provides
> +  time input for its IGMP protocol.
> 
>    @param[in]  Event                  The IP4 service instance's heart
> beat timer.
>    @param[in]  Context                The IP4 service instance.
> 
>  **/
> @@ -349,10 +348,29 @@ Ip4TimerTicking (
>    IN EFI_EVENT              Event,
>    IN VOID                   *Context
>    );
> 
>  /**
> +  This dedicated timer is used to poll underlying network media status.
> In case
> +  of cable swap or wireless network switch, a new round auto
> configuration will
> +  be initiated. The timer will signal the IP4 to run DHCP configuration
> again.
> +  IP4 driver will free old IP address related resource, such as route
> table and
> +  Interface, then initiate a DHCP process to acquire new IP, eventually
> create
> +  route table for new IP address.
> +
> +  @param[in]  Event                  The IP4 service instance's heart
> beat timer.
> +  @param[in]  Context                The IP4 service instance.
> +
> +**/
> +VOID
> +EFIAPI
> +Ip4TimerReconfigChecking (
> +  IN EFI_EVENT              Event,
> +  IN VOID                   *Context
> +  );
> +
> +/**
>    Decrease the life of the transmitted packets. If it is
>    decreased to zero, cancel the packet. This function is
>    called by Ip4PacketTimerTicking which time out both the
>    received-but-not-delivered and transmitted-but-not-recycle
>    packets.
> --
> 1.9.5.msysgit.1
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel


      parent reply	other threads:[~2018-01-12  0:44 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-11 10:20 [Patch] MdeModulePkg/Ip4Dxe: Add an independent timer for reconfig checking Wang Fan
2018-01-12  0:47 ` Wu, Jiaxin
2018-01-12  0:50 ` Fu, Siyuan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=B1FF2E9001CE9041BD10B825821D5BC58B410068@SHSMSX103.ccr.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox