From: "Fu, Siyuan" <siyuan.fu@intel.com>
To: "Wu, Jiaxin" <jiaxin.wu@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Ye, Ting" <ting.ye@intel.com>, "Wu, Jiaxin" <jiaxin.wu@intel.com>
Subject: Re: [Patch] NetworkPkg/HttpBootDxe: Fix the incorrect error message output.
Date: Thu, 1 Mar 2018 07:05:50 +0000 [thread overview]
Message-ID: <B1FF2E9001CE9041BD10B825821D5BC58B44932B@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <20180301062932.14280-2-jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Jiaxin Wu
> Sent: Thursday, March 1, 2018 2:30 PM
> To: edk2-devel@lists.01.org
> Cc: Ye, Ting <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Wu,
> Jiaxin <jiaxin.wu@intel.com>
> Subject: [edk2] [Patch] NetworkPkg/HttpBootDxe: Fix the incorrect error
> message output.
>
> For IPv6 case, if one invalid URL returned from DHCP server, HttpBootDxe
> driver could not retrieve the URL host address from DNS server. In such a
> case, the error message should be printed as:
> Error: Could not retrieve the host address from DNS server.
> Instead of:
> Error: Could not discover the boot information for DHCP server.
> Then, we can still output as following:
> Error: Could not retrieve NBP file size from HTTP server.
>
> Besides, currently implementation in HttpBootLoadFile will always output
> error message even the HTTP process is correct.
>
> This patch is to fix above issue.
>
> Cc: Ye Ting <ting.ye@intel.com>
> Cc: Fu Siyuan <siyuan.fu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
> ---
> NetworkPkg/HttpBootDxe/HttpBootClient.c | 1 +
> NetworkPkg/HttpBootDxe/HttpBootImpl.c | 37 ++++++++++++++++++----------
> -----
> 2 files changed, 21 insertions(+), 17 deletions(-)
>
> diff --git a/NetworkPkg/HttpBootDxe/HttpBootClient.c
> b/NetworkPkg/HttpBootDxe/HttpBootClient.c
> index b93e63bb2f..1d1e47008d 100644
> --- a/NetworkPkg/HttpBootDxe/HttpBootClient.c
> +++ b/NetworkPkg/HttpBootDxe/HttpBootClient.c
> @@ -472,10 +472,11 @@ HttpBootDhcp6ExtractUriInfo (
> }
>
> Status = HttpBootDns (Private, HostNameStr, &IpAddr);
> FreePool (HostNameStr);
> if (EFI_ERROR (Status)) {
> + AsciiPrint ("\n Error: Could not retrieve the host address from
> DNS server.\n");
> goto Error;
> }
> }
>
> CopyMem (&Private->ServerIp.v6, &IpAddr, sizeof (EFI_IPv6_ADDRESS));
> diff --git a/NetworkPkg/HttpBootDxe/HttpBootImpl.c
> b/NetworkPkg/HttpBootDxe/HttpBootImpl.c
> index 16c1207bf8..a0fd934ec4 100644
> --- a/NetworkPkg/HttpBootDxe/HttpBootImpl.c
> +++ b/NetworkPkg/HttpBootDxe/HttpBootImpl.c
> @@ -1,9 +1,9 @@
> /** @file
> The implementation of EFI_LOAD_FILE_PROTOCOL for UEFI HTTP boot.
>
> -Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
> (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> This program and the accompanying materials are licensed and made
> available under
> the terms and conditions of the BSD License that accompanies this
> distribution.
> The full text of the license may be found at
> http://opensource.org/licenses/bsd-license.php.
> @@ -329,11 +329,11 @@ HttpBootLoadFile (
> //
> // Parse the cached offer to get the boot file URL first.
> //
> Status = HttpBootDiscoverBootInfo (Private);
> if (EFI_ERROR (Status)) {
> - AsciiPrint ("\n Error: Could not discover the boot information for
> DHCP server.\n");
> + AsciiPrint ("\n Error: Could not retrieve NBP file size from HTTP
> server.\n");
> goto ON_EXIT;
> }
> }
>
> if (!Private->HttpCreated) {
> @@ -398,26 +398,29 @@ HttpBootLoadFile (
> ImageType
> );
>
> ON_EXIT:
> HttpBootUninstallCallback (Private);
> -
> - if (Status == EFI_ACCESS_DENIED) {
> - AsciiPrint ("\n Error: Could not establish connection with HTTP
> server.\n");
> - } else if (Status == EFI_BUFFER_TOO_SMALL && Buffer != NULL) {
> - AsciiPrint ("\n Error: Buffer size is smaller than the requested
> file.\n");
> - } else if (Status == EFI_OUT_OF_RESOURCES) {
> - AsciiPrint ("\n Error: Could not allocate I/O buffers.\n");
> - } else if (Status == EFI_DEVICE_ERROR) {
> - AsciiPrint ("\n Error: Network device error.\n");
> - } else if (Status == EFI_TIMEOUT) {
> - AsciiPrint ("\n Error: Server response timeout.\n");
> - } else if (Status == EFI_ABORTED) {
> - AsciiPrint ("\n Error: Remote boot cancelled.\n");
> - } else if (Status != EFI_BUFFER_TOO_SMALL) {
> - AsciiPrint ("\n Error: Unexpected network error.\n");
> +
> + if (EFI_ERROR (Status)) {
> + if (Status == EFI_ACCESS_DENIED) {
> + AsciiPrint ("\n Error: Could not establish connection with HTTP
> server.\n");
> + } else if (Status == EFI_BUFFER_TOO_SMALL && Buffer != NULL) {
> + AsciiPrint ("\n Error: Buffer size is smaller than the requested
> file.\n");
> + } else if (Status == EFI_OUT_OF_RESOURCES) {
> + AsciiPrint ("\n Error: Could not allocate I/O buffers.\n");
> + } else if (Status == EFI_DEVICE_ERROR) {
> + AsciiPrint ("\n Error: Network device error.\n");
> + } else if (Status == EFI_TIMEOUT) {
> + AsciiPrint ("\n Error: Server response timeout.\n");
> + } else if (Status == EFI_ABORTED) {
> + AsciiPrint ("\n Error: Remote boot cancelled.\n");
> + } else if (Status != EFI_BUFFER_TOO_SMALL) {
> + AsciiPrint ("\n Error: Unexpected network error.\n");
> + }
> }
> +
> return Status;
> }
>
> /**
> Disable the use of UEFI HTTP boot function.
> --
> 2.16.2.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2018-03-01 6:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 6:29 [Patch] NetworkPkg/HttpBootDxe: Correct the parameter check for the usage of HttpBootGetFileFromCache Jiaxin Wu
2018-03-01 6:29 ` [Patch] NetworkPkg/HttpBootDxe: Fix the incorrect error message output Jiaxin Wu
2018-03-01 7:05 ` Fu, Siyuan [this message]
2018-03-01 7:24 ` Ye, Ting
2018-03-01 6:50 ` [Patch] NetworkPkg/HttpBootDxe: Correct the parameter check for the usage of HttpBootGetFileFromCache Ye, Ting
2018-03-01 7:05 ` Fu, Siyuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B1FF2E9001CE9041BD10B825821D5BC58B44932B@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox