From: "Wu, Hao A" <hao.a.wu@intel.com>
To: "Wu, Jiaxin" <jiaxin.wu@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Ni, Ruiyu" <ruiyu.ni@intel.com>, "Ye, Ting" <ting.ye@intel.com>,
"Fu, Siyuan" <siyuan.fu@intel.com>
Subject: Re: [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device.
Date: Tue, 30 Jan 2018 06:35:27 +0000 [thread overview]
Message-ID: <B80AF82E9BFB8E4FBD8C89DA810C6A0931D44F0D@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1517277867-13292-1-git-send-email-jiaxin.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Best Regards,
Hao Wu
> -----Original Message-----
> From: Wu, Jiaxin
> Sent: Tuesday, January 30, 2018 10:04 AM
> To: edk2-devel@lists.01.org
> Cc: Ni, Ruiyu; Wu, Hao A; Ye, Ting; Fu, Siyuan; Wu, Jiaxin
> Subject: [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device.
>
> Currently, the FV image size is not enough for the modules after
> we enable some flags defined in Nt32Pkg.dsc, e.g:
> DEFINE SECURE_BOOT_ENABLE = TRUE
> DEFINE TLS_ENABLE = TRUE
> DEFINE NETWORK_IP6_ENABLE = TRUE
>
> This patch is to increase the size of FLASH Device to meet the requirement.
>
> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Hao Wu <hao.a.wu@intel.com>
> Cc: Ye Ting <ting.ye@intel.com>
> Cc: Fu Siyuan <siyuan.fu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
> ---
> Nt32Pkg/Nt32Pkg.fdf | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/Nt32Pkg/Nt32Pkg.fdf b/Nt32Pkg/Nt32Pkg.fdf
> index d104cb7..db2719f 100644
> --- a/Nt32Pkg/Nt32Pkg.fdf
> +++ b/Nt32Pkg/Nt32Pkg.fdf
> @@ -26,14 +26,14 @@
> # existing system flash.
> #
>
> ################################################################
> ################
> [FD.Nt32]
> BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress
> #The base address of the FLASH Device.
> -Size =
> 0x00380000|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFirmwareFdSize #The size
> in bytes of the FLASH Device
> +Size =
> 0x00480000|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFirmwareFdSize #The size
> in bytes of the FLASH Device
> ErasePolarity = 1
> BlockSize = 0x10000
> -NumBlocks = 0x38
> +NumBlocks = 0x48
>
>
> ################################################################
> ################
> #
> # Following are lists of FD Region layout which correspond to the locations of
> different
> # images within the flash device.
> @@ -46,15 +46,15 @@ NumBlocks = 0x38
> # Offset|Size
> # PcdOffsetCName|PcdSizeCName
> # RegionType <FV, DATA, or FILE>
> #
>
> ################################################################
> ################
> -0x00000000|0x00360000
> +0x00000000|0x00460000
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgToken
> SpaceGuid.PcdWinNtFlashFvRecoverySize
> FV = FvRecovery
>
> -0x00360000|0x0000c000
> +0x00460000|0x0000c000
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeM
> odulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
> #NV_VARIABLE_STORE
> DATA = {
> ## This is the EFI_FIRMWARE_VOLUME_HEADER
> # ZeroVector []
> @@ -91,15 +91,15 @@ DATA = {
> 0xB8, 0xBF, 0x00, 0x00,
> #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
> 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> }
>
> -0x0036c000|0x00002000
> +0x0046c000|0x00002000
> #NV_EVENT_LOG
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32P
> kgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize
>
> -0x0036e000|0x00002000
> +0x0046e000|0x00002000
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMd
> eModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
> #NV_FTW_WORKING
> DATA = {
> # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature =
> gEdkiiWorkingBlockSignatureGuid =
> # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b,
> 0x95 }}
> @@ -109,11 +109,11 @@ DATA = {
> 0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF,
> # WriteQueueSize: UINT64
> 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> }
>
> -0x00370000|0x00010000
> +0x00470000|0x00010000
> #NV_FTW_SPARE
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeM
> odulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
>
>
> ################################################################
> ################
> #
> --
> 1.9.5.msysgit.1
prev parent reply other threads:[~2018-01-30 6:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-30 2:04 [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device Jiaxin Wu
2018-01-30 6:35 ` Wu, Hao A [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B80AF82E9BFB8E4FBD8C89DA810C6A0931D44F0D@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox