From: "Wu, Hao A" <hao.a.wu@intel.com>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel-01 <edk2-devel@lists.01.org>,
"Tian, Feng" <feng.tian@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
Leif Lindholm <leif.lindholm@linaro.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
"nadavh@marvell.com" <nadavh@marvell.com>,
"jsd@semihalf.com" <jsd@semihalf.com>,
Tomasz Michalec <tm@semihalf.com>
Subject: Re: [PATCH v2 0/4] SdMmcOverride extension
Date: Fri, 26 Oct 2018 07:22:03 +0000 [thread overview]
Message-ID: <B80AF82E9BFB8E4FBD8C89DA810C6A093C846C4A@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <CAPv3WKdho-M7EH0VHOOqne_Q4LAMkpCqhYgA+joF9fJbtYgExQ@mail.gmail.com>
> -----Original Message-----
> From: Marcin Wojtas [mailto:mw@semihalf.com]
> Sent: Thursday, October 25, 2018 8:43 PM
> To: Wu, Hao A
> Cc: edk2-devel-01; Tian, Feng; Kinney, Michael D; Gao, Liming; Leif Lindholm;
> Ard Biesheuvel; nadavh@marvell.com; jsd@semihalf.com; Tomasz Michalec
> Subject: Re: [PATCH v2 0/4] SdMmcOverride extension
>
> Hi Hao,
>
> Were you able to find time for evaluating my patchset?
Hi Marcin,
I plan to start looking into your series sometime next week.
I will give you some updates then.
Best Regards,
Hao Wu
>
> Best regards,
> Marcin
> pt., 12 paź 2018 o 14:50 Marcin Wojtas <mw@semihalf.com> napisał(a):
> >
> > pt., 12 paź 2018 o 14:48 Wu, Hao A <hao.a.wu@intel.com> napisał(a):
> > >
> > > > -----Original Message-----
> > > > From: Marcin Wojtas [mailto:mw@semihalf.com]
> > > > Sent: Friday, October 12, 2018 1:33 PM
> > > > To: Wu, Hao A
> > > > Cc: edk2-devel-01; Tian, Feng; Kinney, Michael D; Gao, Liming; Leif
> Lindholm;
> > > > Ard Biesheuvel; nadavh@marvell.com; jsd@semihalf.com; Tomasz
> Michalec
> > > > Subject: Re: [PATCH v2 0/4] SdMmcOverride extension
> > > >
> > > > Hi Hao,
> > > >
> > > > pt., 12 paź 2018 o 07:25 Wu, Hao A <hao.a.wu@intel.com> napisał(a):
> > > > >
> > > > > Hi Marcin,
> > > > >
> > > > > Please grant me some time for this series.
> > > > >
> > > > > Since I found that the extension of the SdMmc override protocol
> (mainly
> > > > > the 3rd and 4th patch of the series) may have something overlaps
> with a
> > > > > (internal) request to configure the driver strength parameter and
> operating
> > > > > clock frequency of the SD/EMMC devices.
> > > > >
> > > > > For the (driver strength/operating freq) customize, we already have a
> > > > > proposal on the way. So I am wondering if you could grant me some
> time
> > > > to
> > > > > investigate whether both the cases can be addressed together based
> on
> > > > your
> > > > > proposed patch.
> > > > >
> > > >
> > > > Sure. I'm only wondering if it's not best to collect all remarks and
> > > > maybe update to v3 both edk2 and edk2-platforms sides (so far the
> > > > issues have been not critical, such as typos, parameters' names,
> > > > etc.). In the meantime you would be able to validate if the solution
> > > > is sufficient for you as well. What do you think? When do you expect
> > > > to be able to look at it vs your internal requirements more deeply?
> > > >
> > > > Best regards,
> > > > Marcin
> > >
> > > I think you can hold the new version of the patch if the feedbacks do not
> > > lead to considerable changes. At this moment, I can barely take time for
> > > the evaluation. I think I will be able to fully shift to this in about 2
> > > weeks. Does it sound acceptable to you with regard to the urgency level
> > > for the series?
> > >
> > > I will try my best to move up the process. Sorry again for the possible
> > > delay.
> >
> > I will proceed with other remaining items for my platforms and allow
> > myself to ping you about status around end of October :)
> >
> > Best regards,
> > Marcin
> >
> > >
> > > >
> > > >
> > > > > Thanks in advance.
> > > > >
> > > > > Best Regards,
> > > > > Hao Wu
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Marcin Wojtas [mailto:mw@semihalf.com]
> > > > > > Sent: Friday, October 05, 2018 9:25 PM
> > > > > > To: edk2-devel@lists.01.org
> > > > > > Cc: Tian, Feng; Kinney, Michael D; Gao, Liming;
> leif.lindholm@linaro.org;
> > > > Wu,
> > > > > > Hao A; ard.biesheuvel@linaro.org; nadavh@marvell.com;
> > > > > > mw@semihalf.com; jsd@semihalf.com; tm@semihalf.com
> > > > > > Subject: [PATCH v2 0/4] SdMmcOverride extension
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > This is the second version of the patchset. Initial one was
> > > > > > interleaved with the fixes, which after split got already merged.
> > > > > > The biggest change is - resigning from the new callbacks
> > > > > > and extending parameter lists of both NotifyPhase and Capability
> > > > > > routines.
> > > > > >
> > > > > > Patches are available in the github:
> > > > > > https://github.com/MarvellEmbeddedProcessors/edk2-open-
> > > > > > platform/commits/sdmmc-override-upstream-r20181005
> > > > > >
> > > > > > Please note that extending SdMmcOverride protocol was impacting
> > > > > > so far the only user of it (Synquacer controller). In paralel
> > > > > > edk2-platforms patchset, a patch can be found:
> > > > > > ("Silicon/SynQuacer/PlatformDxe: adjust to updated
> SdMmcOverride")
> > > > > > which immunizes for above and future extensions of the protocol:
> > > > > > https://github.com/MarvellEmbeddedProcessors/edk2-open-
> > > > > > platform/commits/xenon-upstream-r20181005
> > > > > >
> > > > > > I'm looking forward to the comments and remarks.
> > > > > >
> > > > > > Best regards,
> > > > > > Marcin
> > > > > >
> > > > > > Changelog:
> > > > > > v1 -> v2
> > > > > > * Rebase onto newest master
> > > > > > * 1/4 [new patch] - preparation for extending NotifyPhase
> > > > > > * 2/4 - UhsSignaling as a part of NotifyPhase
> > > > > > * 3/4 - SwitchClockFreqPost as a part of NotifyPhase
> > > > > > * 4/4 - Allow updating BaseClkFreq via Capability instead of the
> > > > > > independent callback.
> > > > > >
> > > > > > Marcin Wojtas (2):
> > > > > > MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in
> > > > > > NotifyPhase
> > > > > > MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock
> frequency
> > > > > >
> > > > > > Tomasz Michalec (2):
> > > > > > MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to
> SdMmcOverride
> > > > > > protocol
> > > > > > MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to
> > > > > > SdMmcOverride
> > > > > >
> > > > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.h | 6 +
> > > > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h | 62
> +++++-
> > > > > > MdeModulePkg/Include/Protocol/SdMmcOverride.h | 12 +-
> > > > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c | 215
> > > > > > ++++++++++++++------
> > > > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 57
> +++++-
> > > > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.c | 18
> +-
> > > > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c | 108
> > > > ++++++++-
> > > > > > -
> > > > > > 7 files changed, 383 insertions(+), 95 deletions(-)
> > > > > >
> > > > > > --
> > > > > > 2.7.4
> > > > >
next prev parent reply other threads:[~2018-10-26 7:22 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 13:25 [PATCH v2 0/4] SdMmcOverride extension Marcin Wojtas
2018-10-05 13:25 ` [PATCH v2 1/4] MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in NotifyPhase Marcin Wojtas
2018-10-08 12:21 ` Ard Biesheuvel
2018-10-05 13:25 ` [PATCH v2 2/4] MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocol Marcin Wojtas
2018-10-05 15:12 ` Philippe Mathieu-Daudé
2018-10-05 15:17 ` Marcin Wojtas
2018-10-08 12:41 ` Ard Biesheuvel
2018-10-08 12:59 ` Marcin Wojtas
2018-10-08 13:07 ` Ard Biesheuvel
2018-10-08 13:17 ` Marcin Wojtas
2018-10-08 13:27 ` Ard Biesheuvel
2018-10-08 13:37 ` Marcin Wojtas
2018-10-08 13:43 ` Ard Biesheuvel
2018-10-08 14:52 ` Marcin Wojtas
2018-10-08 15:10 ` Ard Biesheuvel
2018-10-09 11:22 ` Wu, Hao A
2018-10-09 11:32 ` Marcin Wojtas
2018-10-09 11:45 ` Ard Biesheuvel
2018-10-09 11:51 ` Marcin Wojtas
2018-10-11 15:43 ` Marcin Wojtas
2018-10-12 1:39 ` Wu, Hao A
2018-10-12 5:06 ` Marcin Wojtas
2018-10-12 15:55 ` Ard Biesheuvel
2018-10-12 16:04 ` Marcin Wojtas
2018-10-12 16:24 ` Ard Biesheuvel
2018-10-12 16:49 ` Marcin Wojtas
2018-11-01 7:04 ` Wu, Hao A
2018-11-02 8:21 ` Marcin Wojtas
2018-11-02 12:16 ` Marcin Wojtas
2018-11-03 2:57 ` Wu, Hao A
2018-10-05 13:25 ` [PATCH v2 3/4] MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to SdMmcOverride Marcin Wojtas
2018-10-08 12:44 ` Ard Biesheuvel
2018-11-01 7:06 ` Wu, Hao A
2018-11-02 9:39 ` Marcin Wojtas
2018-11-03 3:19 ` Wu, Hao A
2018-10-05 13:25 ` [PATCH v2 4/4] MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock frequency Marcin Wojtas
2018-10-08 12:49 ` Ard Biesheuvel
2018-11-01 7:11 ` Wu, Hao A
2018-11-02 9:52 ` Marcin Wojtas
2018-10-12 5:24 ` [PATCH v2 0/4] SdMmcOverride extension Wu, Hao A
2018-10-12 5:33 ` Marcin Wojtas
2018-10-12 12:48 ` Wu, Hao A
2018-10-12 12:50 ` Marcin Wojtas
2018-10-25 12:43 ` Marcin Wojtas
2018-10-26 7:22 ` Wu, Hao A [this message]
2018-11-01 7:11 ` Wu, Hao A
2018-11-02 10:09 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B80AF82E9BFB8E4FBD8C89DA810C6A093C846C4A@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox