* Re: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThruDxe: Fix unaligned data transfer handling
[not found] <15AA3FDC3F7E8A10.3441@groups.io>
@ 2019-06-24 11:38 ` Albecki, Mateusz
2019-06-25 1:44 ` Wu, Hao A
0 siblings, 1 reply; 2+ messages in thread
From: Albecki, Mateusz @ 2019-06-24 11:38 UTC (permalink / raw)
To: devel@edk2.groups.io, Albecki, Mateusz; +Cc: Wu, Hao A
Test info:
Tested UFS enumeration in EFI shell and it is passing on real HW with Samsung device.
Tested read/write to UFS device in EFI shell.
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Albecki, Mateusz
> Sent: Friday, June 21, 2019 5:20 PM
> To: devel@edk2.groups.io
> Cc: Albecki, Mateusz <mateusz.albecki@intel.com>; Wu, Hao A
> <hao.a.wu@intel.com>
> Subject: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThruDxe: Fix
> unaligned data transfer handling
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1341
>
> Since UFS specification requirs the data buffer specified in PRDT to be
> DWORD aligned in size we had a code in UfsInitUtpPrdt that aligned the data
> buffer by rounding down the buffer size to DWORD boundary. This meant
> that for SCSI commands that wanted to perform unaligned data
> transfer(such as SENSE command) we specified to small buffer for the data
> to fit and transfer was aborted. This change introduces code that allocates
> auxiliary DWORD aligned data buffer for unaligned transfer. Device transfers
> data to aligned buffer and when data transfer is over driver copies data from
> aligned buffer to data buffer passed by user.
>
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
> ---
> MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h | 2 +
> .../Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c | 194 +++++++++++++++-
> -----
> 2 files changed, 142 insertions(+), 54 deletions(-)
>
> diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> index 6c98b3a76a..9b68db5ffe 100644
> --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> @@ -92,6 +92,8 @@ typedef struct {
> UINT32 CmdDescSize;
> VOID *CmdDescHost;
> VOID *CmdDescMapping;
> + VOID *AlignedDataBuf;
> + UINTN AlignedDataBufSize;
> VOID *DataBufMapping;
>
> EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet;
> diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> index 4b93821f38..6eb50f09ac 100644
> --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> @@ -394,17 +394,13 @@ UfsInitUtpPrdt (
> UINT8 *Remaining;
> UINTN PrdtNumber;
>
> - if ((BufferSize & (BIT0 | BIT1)) != 0) {
> - BufferSize &= ~(BIT0 | BIT1);
> - DEBUG ((DEBUG_WARN, "UfsInitUtpPrdt: The BufferSize [%d] is not
> dword-aligned!\n", BufferSize));
> - }
> + ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0); ASSERT ((BufferSize &
> + (BIT1 | BIT0)) == 0);
>
> if (BufferSize == 0) {
> return EFI_SUCCESS;
> }
>
> - ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0);
> -
> RemainingLen = BufferSize;
> Remaining = Buffer;
> PrdtNumber = (UINTN)DivU64x32 ((UINT64)BufferSize +
> UFS_MAX_DATA_LEN_PER_PRD - 1, UFS_MAX_DATA_LEN_PER_PRD);
> @@ -1317,6 +1313,135 @@ Exit:
> return Status;
> }
>
> +/**
> + Cleanup data buffers after data transfer. This function
> + also takes care to copy all data to user memory pool for
> + unaligned data transfers.
> +
> + @param[in] Private Pointer to the UFS_PASS_THRU_PRIVATE_DATA
> + @param[in] TransReq Pointer to the transfer request **/ VOID
> +UfsReconcileDataTransferBuffer (
> + IN UFS_PASS_THRU_PRIVATE_DATA *Private,
> + IN UFS_PASS_THRU_TRANS_REQ *TransReq
> + )
> +{
> + if (TransReq->DataBufMapping != NULL) {
> + Private->UfsHostController->Unmap (
> + Private->UfsHostController,
> + TransReq->DataBufMapping
> + );
> + }
> +
> + //
> + // Check if unaligned transfer was performed. If it was and we read
> + // data from device copy memory to user data buffers before cleanup.
> + // The assumption is if auxiliary aligned data buffer is not NULL
> +then
> + // unaligned transfer has been performed.
> + //
> + if (TransReq->AlignedDataBuf != NULL) {
> + if (TransReq->Packet->DataDirection ==
> EFI_EXT_SCSI_DATA_DIRECTION_READ) {
> + CopyMem (TransReq->Packet->InDataBuffer, TransReq-
> >AlignedDataBuf, TransReq->Packet->InTransferLength);
> + }
> + FreeAlignedPages (TransReq->AlignedDataBuf, EFI_SIZE_TO_PAGES
> (TransReq->AlignedDataBufSize));
> + TransReq->AlignedDataBuf = NULL;
> + }
> +}
> +
> +/**
> + Prepare data buffer for transfer
> +
> + @param[in] Private Pointer to the UFS_PASS_THRU_PRIVATE_DATA
> + @param[in, out] TransReq Pointer to the transfer request
> +
> + @retval EFI_DEVICE_ERROR Failed to prepare buffer for transfer
> + @retval EFI_SUCCESS Buffer ready for transfer
> +**/
> +EFI_STATUS
> +UfsPrepareDataTransferBuffer (
> + IN UFS_PASS_THRU_PRIVATE_DATA *Private,
> + IN OUT UFS_PASS_THRU_TRANS_REQ *TransReq
> + )
> +{
> + EFI_STATUS Status;
> + VOID *DataBuf;
> + UINT32 DataLen;
> + UINTN MapLength;
> + EFI_PHYSICAL_ADDRESS DataBufPhyAddr;
> + EDKII_UFS_HOST_CONTROLLER_OPERATION Flag;
> + UTP_TR_PRD *PrdtBase;
> +
> + DataBufPhyAddr = (EFI_PHYSICAL_ADDRESS) NULL;
> + DataBuf = NULL;
> +
> + //
> + // For unaligned data transfers we allocate auxiliary DWORD aligned
> memory pool.
> + // When command is finished auxiliary memory pool is copied into actual
> user memory.
> + // This is requiered to assure data transfer safety(DWORD alignment
> + required by UFS spec.) // if (TransReq->Packet->DataDirection ==
> + EFI_EXT_SCSI_DATA_DIRECTION_READ) {
> + if (((UINTN)TransReq->Packet->InDataBuffer % 4 != 0) || (TransReq-
> >Packet->InTransferLength % 4 != 0)) {
> + DataLen = TransReq->Packet->InTransferLength + (4 - (TransReq-
> >Packet->InTransferLength % 4));
> + DataBuf = AllocateAlignedPages (EFI_SIZE_TO_PAGES (DataLen), 4);
> + if (DataBuf == NULL) {
> + return EFI_DEVICE_ERROR;
> + }
> + ZeroMem (DataBuf, DataLen);
> + TransReq->AlignedDataBuf = DataBuf;
> + TransReq->AlignedDataBufSize = DataLen;
> + } else {
> + DataLen = TransReq->Packet->InTransferLength;
> + DataBuf = TransReq->Packet->InDataBuffer;
> + }
> + Flag = EdkiiUfsHcOperationBusMasterWrite;
> + } else {
> + if (((UINTN)TransReq->Packet->OutDataBuffer % 4 != 0) || (TransReq-
> >Packet->OutTransferLength % 4 != 0)) {
> + DataLen = TransReq->Packet->OutTransferLength + (4 - (TransReq-
> >Packet->OutTransferLength % 4));
> + DataBuf = AllocateAlignedPages (EFI_SIZE_TO_PAGES (DataLen), 4);
> + if (DataBuf == NULL) {
> + return EFI_DEVICE_ERROR;
> + }
> + CopyMem (DataBuf, TransReq->Packet->OutDataBuffer, TransReq-
> >Packet->OutTransferLength);
> + TransReq->AlignedDataBuf = DataBuf;
> + TransReq->AlignedDataBufSize = DataLen;
> + } else {
> + DataLen = TransReq->Packet->OutTransferLength;
> + DataBuf = TransReq->Packet->OutDataBuffer;
> + }
> + Flag = EdkiiUfsHcOperationBusMasterRead;
> + }
> +
> + if (DataLen != 0) {
> + MapLength = DataLen;
> + Status = Private->UfsHostController->Map (
> + Private->UfsHostController,
> + Flag,
> + DataBuf,
> + &MapLength,
> + &DataBufPhyAddr,
> + &TransReq->DataBufMapping
> + );
> +
> + if (EFI_ERROR (Status) || (DataLen != MapLength)) {
> + if (TransReq->AlignedDataBuf != NULL) {
> + FreePages (TransReq->AlignedDataBuf, EFI_SIZE_TO_PAGES
> (TransReq->AlignedDataBufSize));
> + TransReq->AlignedDataBuf = NULL;
> + }
> + return EFI_DEVICE_ERROR;
> + }
> + }
> +
> + //
> + // Fill PRDT table of Command UPIU for executed SCSI cmd.
> + //
> + PrdtBase = (UTP_TR_PRD*)((UINT8*)TransReq->CmdDescHost +
> ROUNDUP8
> + (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof
> (UTP_RESPONSE_UPIU)));
> + ASSERT (PrdtBase != NULL); UfsInitUtpPrdt (PrdtBase,
> + (VOID*)(UINTN)DataBufPhyAddr, DataLen);
> +
> + return EFI_SUCCESS;
> +}
> +
> /**
> Sends a UFS-supported SCSI Request Packet to a UFS device that is
> attached to the UFS host controller.
>
> @@ -1353,24 +1478,19 @@ UfsExecScsiCmds (
> UTP_RESPONSE_UPIU *Response;
> UINT16 SenseDataLen;
> UINT32 ResTranCount;
> - VOID *DataBuf;
> - EFI_PHYSICAL_ADDRESS DataBufPhyAddr;
> - UINT32 DataLen;
> - UINTN MapLength;
> - EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
> - EDKII_UFS_HOST_CONTROLLER_OPERATION Flag;
> - UTP_TR_PRD *PrdtBase;
> EFI_TPL OldTpl;
> UFS_PASS_THRU_TRANS_REQ *TransReq;
> + EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
>
> - TransReq = AllocateZeroPool (sizeof (UFS_PASS_THRU_TRANS_REQ));
> + TransReq = AllocateZeroPool (sizeof (UFS_PASS_THRU_TRANS_REQ));
> if (TransReq == NULL) {
> return EFI_OUT_OF_RESOURCES;
> }
>
> TransReq->Signature = UFS_PASS_THRU_TRANS_REQ_SIG;
> TransReq->TimeoutRemain = Packet->Timeout;
> - DataBufPhyAddr = 0;
> + TransReq->Packet = Packet;
> +
> UfsHc = Private->UfsHostController;
> //
> // Find out which slot of transfer request list is available.
> @@ -1399,44 +1519,16 @@ UfsExecScsiCmds (
>
> TransReq->CmdDescSize = TransReq->Trd->PrdtO * sizeof (UINT32) +
> TransReq->Trd->PrdtL * sizeof (UTP_TR_PRD);
>
> - if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
> - DataBuf = Packet->InDataBuffer;
> - DataLen = Packet->InTransferLength;
> - Flag = EdkiiUfsHcOperationBusMasterWrite;
> - } else {
> - DataBuf = Packet->OutDataBuffer;
> - DataLen = Packet->OutTransferLength;
> - Flag = EdkiiUfsHcOperationBusMasterRead;
> - }
> -
> - if (DataLen != 0) {
> - MapLength = DataLen;
> - Status = UfsHc->Map (
> - UfsHc,
> - Flag,
> - DataBuf,
> - &MapLength,
> - &DataBufPhyAddr,
> - &TransReq->DataBufMapping
> - );
> -
> - if (EFI_ERROR (Status) || (DataLen != MapLength)) {
> - goto Exit1;
> - }
> + Status = UfsPrepareDataTransferBuffer (Private, TransReq); if
> + (EFI_ERROR (Status)) {
> + goto Exit1;
> }
> - //
> - // Fill PRDT table of Command UPIU for executed SCSI cmd.
> - //
> - PrdtBase = (UTP_TR_PRD*)((UINT8*)TransReq->CmdDescHost +
> ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof
> (UTP_RESPONSE_UPIU)));
> - ASSERT (PrdtBase != NULL);
> - UfsInitUtpPrdt (PrdtBase, (VOID*)(UINTN)DataBufPhyAddr, DataLen);
>
> //
> // Insert the async SCSI cmd to the Async I/O list
> //
> if (Event != NULL) {
> OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
> - TransReq->Packet = Packet;
> TransReq->CallerEvent = Event;
> InsertTailList (&Private->Queue, &TransReq->TransferList);
> gBS->RestoreTPL (OldTpl);
> @@ -1515,9 +1607,7 @@ Exit:
>
> UfsStopExecCmd (Private, TransReq->Slot);
>
> - if (TransReq->DataBufMapping != NULL) {
> - UfsHc->Unmap (UfsHc, TransReq->DataBufMapping);
> - }
> + UfsReconcileDataTransferBuffer (Private, TransReq);
>
> Exit1:
> if (TransReq->CmdDescMapping != NULL) { @@ -1532,7 +1622,6 @@ Exit1:
> return Status;
> }
>
> -
> /**
> Sent UIC DME_LINKSTARTUP command to start the link startup procedure.
>
> @@ -2100,7 +2189,6 @@ UfsControllerStop (
> return EFI_SUCCESS;
> }
>
> -
> /**
> Internal helper function which will signal the caller event and clean up
> resources.
> @@ -2132,9 +2220,7 @@ SignalCallerEvent (
>
> UfsStopExecCmd (Private, TransReq->Slot);
>
> - if (TransReq->DataBufMapping != NULL) {
> - UfsHc->Unmap (UfsHc, TransReq->DataBufMapping);
> - }
> + UfsReconcileDataTransferBuffer (Private, TransReq);
>
> if (TransReq->CmdDescMapping != NULL) {
> UfsHc->Unmap (UfsHc, TransReq->CmdDescMapping);
> --
> 2.14.1.windows.1
>
> --------------------------------------------------------------------
>
> Intel Technology Poland sp. z o.o.
> ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII
> Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-
> 07-52-316 | Kapital zakladowy 200.000 PLN.
>
> Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego
> adresata i moze zawierac informacje poufne. W razie przypadkowego
> otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale
> jej usuniecie; jakiekolwiek przegladanie lub rozpowszechnianie jest
> zabronione.
> This e-mail and any attachments may contain confidential material for the
> sole use of the intended recipient(s). If you are not the intended recipient,
> please contact the sender and delete all copies; any review or distribution by
> others is strictly prohibited.
>
>
>
--------------------------------------------------------------------
Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.
Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek
przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by
others is strictly prohibited.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThruDxe: Fix unaligned data transfer handling
2019-06-24 11:38 ` [edk2-devel] [PATCH] MdeModulePkg/UfsPassThruDxe: Fix unaligned data transfer handling Albecki, Mateusz
@ 2019-06-25 1:44 ` Wu, Hao A
0 siblings, 0 replies; 2+ messages in thread
From: Wu, Hao A @ 2019-06-25 1:44 UTC (permalink / raw)
To: Albecki, Mateusz, devel@edk2.groups.io
> -----Original Message-----
> From: Albecki, Mateusz
> Sent: Monday, June 24, 2019 7:39 PM
> To: devel@edk2.groups.io; Albecki, Mateusz
> Cc: Wu, Hao A
> Subject: RE: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThruDxe: Fix
> unaligned data transfer handling
>
> Test info:
>
> Tested UFS enumeration in EFI shell and it is passing on real HW with
> Samsung device.
> Tested read/write to UFS device in EFI shell.
Thanks for the information.
Two comments below with regard to the cleanup of the auxiliary buffer.
With these handled,
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
>
> > -----Original Message-----
> > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> > Albecki, Mateusz
> > Sent: Friday, June 21, 2019 5:20 PM
> > To: devel@edk2.groups.io
> > Cc: Albecki, Mateusz <mateusz.albecki@intel.com>; Wu, Hao A
> > <hao.a.wu@intel.com>
> > Subject: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThruDxe: Fix
> > unaligned data transfer handling
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1341
> >
> > Since UFS specification requirs the data buffer specified in PRDT to be
> > DWORD aligned in size we had a code in UfsInitUtpPrdt that aligned the
> data
> > buffer by rounding down the buffer size to DWORD boundary. This meant
> > that for SCSI commands that wanted to perform unaligned data
> > transfer(such as SENSE command) we specified to small buffer for the data
> > to fit and transfer was aborted. This change introduces code that allocates
> > auxiliary DWORD aligned data buffer for unaligned transfer. Device
> transfers
> > data to aligned buffer and when data transfer is over driver copies data
> from
> > aligned buffer to data buffer passed by user.
> >
> > Cc: Hao A Wu <hao.a.wu@intel.com>
> > Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
> > ---
> > MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h | 2 +
> > .../Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c | 194
> +++++++++++++++-
> > -----
> > 2 files changed, 142 insertions(+), 54 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> > b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> > index 6c98b3a76a..9b68db5ffe 100644
> > --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> > +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
> > @@ -92,6 +92,8 @@ typedef struct {
> > UINT32 CmdDescSize;
> > VOID *CmdDescHost;
> > VOID *CmdDescMapping;
> > + VOID *AlignedDataBuf;
> > + UINTN AlignedDataBufSize;
> > VOID *DataBufMapping;
> >
> > EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet;
> > diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > index 4b93821f38..6eb50f09ac 100644
> > --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > @@ -394,17 +394,13 @@ UfsInitUtpPrdt (
> > UINT8 *Remaining;
> > UINTN PrdtNumber;
> >
> > - if ((BufferSize & (BIT0 | BIT1)) != 0) {
> > - BufferSize &= ~(BIT0 | BIT1);
> > - DEBUG ((DEBUG_WARN, "UfsInitUtpPrdt: The BufferSize [%d] is not
> > dword-aligned!\n", BufferSize));
> > - }
> > + ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0); ASSERT ((BufferSize &
> > + (BIT1 | BIT0)) == 0);
> >
> > if (BufferSize == 0) {
> > return EFI_SUCCESS;
> > }
> >
> > - ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0);
> > -
> > RemainingLen = BufferSize;
> > Remaining = Buffer;
> > PrdtNumber = (UINTN)DivU64x32 ((UINT64)BufferSize +
> > UFS_MAX_DATA_LEN_PER_PRD - 1, UFS_MAX_DATA_LEN_PER_PRD);
> > @@ -1317,6 +1313,135 @@ Exit:
> > return Status;
> > }
> >
> > +/**
> > + Cleanup data buffers after data transfer. This function
> > + also takes care to copy all data to user memory pool for
> > + unaligned data transfers.
> > +
> > + @param[in] Private Pointer to the UFS_PASS_THRU_PRIVATE_DATA
> > + @param[in] TransReq Pointer to the transfer request **/ VOID
> > +UfsReconcileDataTransferBuffer (
> > + IN UFS_PASS_THRU_PRIVATE_DATA *Private,
> > + IN UFS_PASS_THRU_TRANS_REQ *TransReq
> > + )
> > +{
> > + if (TransReq->DataBufMapping != NULL) {
> > + Private->UfsHostController->Unmap (
> > + Private->UfsHostController,
> > + TransReq->DataBufMapping
> > + );
> > + }
> > +
> > + //
> > + // Check if unaligned transfer was performed. If it was and we read
> > + // data from device copy memory to user data buffers before cleanup.
> > + // The assumption is if auxiliary aligned data buffer is not NULL
> > +then
> > + // unaligned transfer has been performed.
> > + //
> > + if (TransReq->AlignedDataBuf != NULL) {
> > + if (TransReq->Packet->DataDirection ==
> > EFI_EXT_SCSI_DATA_DIRECTION_READ) {
> > + CopyMem (TransReq->Packet->InDataBuffer, TransReq-
> > >AlignedDataBuf, TransReq->Packet->InTransferLength);
> > + }
Please help to wipe out the content in the 'TransReq->AlignedDataBuf'
before freeing. It may contain information that is not intended to remain
in memory.
> > + FreeAlignedPages (TransReq->AlignedDataBuf, EFI_SIZE_TO_PAGES
> > (TransReq->AlignedDataBufSize));
> > + TransReq->AlignedDataBuf = NULL;
> > + }
> > +}
> > +
> > +/**
> > + Prepare data buffer for transfer
> > +
> > + @param[in] Private Pointer to the UFS_PASS_THRU_PRIVATE_DATA
> > + @param[in, out] TransReq Pointer to the transfer request
> > +
> > + @retval EFI_DEVICE_ERROR Failed to prepare buffer for transfer
> > + @retval EFI_SUCCESS Buffer ready for transfer
> > +**/
> > +EFI_STATUS
> > +UfsPrepareDataTransferBuffer (
> > + IN UFS_PASS_THRU_PRIVATE_DATA *Private,
> > + IN OUT UFS_PASS_THRU_TRANS_REQ *TransReq
> > + )
> > +{
> > + EFI_STATUS Status;
> > + VOID *DataBuf;
> > + UINT32 DataLen;
> > + UINTN MapLength;
> > + EFI_PHYSICAL_ADDRESS DataBufPhyAddr;
> > + EDKII_UFS_HOST_CONTROLLER_OPERATION Flag;
> > + UTP_TR_PRD *PrdtBase;
> > +
> > + DataBufPhyAddr = (EFI_PHYSICAL_ADDRESS) NULL;
> > + DataBuf = NULL;
> > +
> > + //
> > + // For unaligned data transfers we allocate auxiliary DWORD aligned
> > memory pool.
> > + // When command is finished auxiliary memory pool is copied into actual
> > user memory.
> > + // This is requiered to assure data transfer safety(DWORD alignment
> > + required by UFS spec.) // if (TransReq->Packet->DataDirection ==
> > + EFI_EXT_SCSI_DATA_DIRECTION_READ) {
> > + if (((UINTN)TransReq->Packet->InDataBuffer % 4 != 0) || (TransReq-
> > >Packet->InTransferLength % 4 != 0)) {
> > + DataLen = TransReq->Packet->InTransferLength + (4 - (TransReq-
> > >Packet->InTransferLength % 4));
> > + DataBuf = AllocateAlignedPages (EFI_SIZE_TO_PAGES (DataLen), 4);
> > + if (DataBuf == NULL) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > + ZeroMem (DataBuf, DataLen);
> > + TransReq->AlignedDataBuf = DataBuf;
> > + TransReq->AlignedDataBufSize = DataLen;
> > + } else {
> > + DataLen = TransReq->Packet->InTransferLength;
> > + DataBuf = TransReq->Packet->InDataBuffer;
> > + }
> > + Flag = EdkiiUfsHcOperationBusMasterWrite;
> > + } else {
> > + if (((UINTN)TransReq->Packet->OutDataBuffer % 4 != 0) || (TransReq-
> > >Packet->OutTransferLength % 4 != 0)) {
> > + DataLen = TransReq->Packet->OutTransferLength + (4 - (TransReq-
> > >Packet->OutTransferLength % 4));
> > + DataBuf = AllocateAlignedPages (EFI_SIZE_TO_PAGES (DataLen), 4);
> > + if (DataBuf == NULL) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > + CopyMem (DataBuf, TransReq->Packet->OutDataBuffer, TransReq-
> > >Packet->OutTransferLength);
> > + TransReq->AlignedDataBuf = DataBuf;
> > + TransReq->AlignedDataBufSize = DataLen;
> > + } else {
> > + DataLen = TransReq->Packet->OutTransferLength;
> > + DataBuf = TransReq->Packet->OutDataBuffer;
> > + }
> > + Flag = EdkiiUfsHcOperationBusMasterRead;
> > + }
> > +
> > + if (DataLen != 0) {
> > + MapLength = DataLen;
> > + Status = Private->UfsHostController->Map (
> > + Private->UfsHostController,
> > + Flag,
> > + DataBuf,
> > + &MapLength,
> > + &DataBufPhyAddr,
> > + &TransReq->DataBufMapping
> > + );
> > +
> > + if (EFI_ERROR (Status) || (DataLen != MapLength)) {
> > + if (TransReq->AlignedDataBuf != NULL) {
> > + FreePages (TransReq->AlignedDataBuf, EFI_SIZE_TO_PAGES
> > (TransReq->AlignedDataBufSize));
I think FreeAlignedPages() should be used here.
Also, please help to wipe out the content in 'TransReq->AlignedDataBuf'.
Best Regards,
Hao Wu
> > + TransReq->AlignedDataBuf = NULL;
> > + }
> > + return EFI_DEVICE_ERROR;
> > + }
> > + }
> > +
> > + //
> > + // Fill PRDT table of Command UPIU for executed SCSI cmd.
> > + //
> > + PrdtBase = (UTP_TR_PRD*)((UINT8*)TransReq->CmdDescHost +
> > ROUNDUP8
> > + (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof
> > (UTP_RESPONSE_UPIU)));
> > + ASSERT (PrdtBase != NULL); UfsInitUtpPrdt (PrdtBase,
> > + (VOID*)(UINTN)DataBufPhyAddr, DataLen);
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > /**
> > Sends a UFS-supported SCSI Request Packet to a UFS device that is
> > attached to the UFS host controller.
> >
> > @@ -1353,24 +1478,19 @@ UfsExecScsiCmds (
> > UTP_RESPONSE_UPIU *Response;
> > UINT16 SenseDataLen;
> > UINT32 ResTranCount;
> > - VOID *DataBuf;
> > - EFI_PHYSICAL_ADDRESS DataBufPhyAddr;
> > - UINT32 DataLen;
> > - UINTN MapLength;
> > - EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
> > - EDKII_UFS_HOST_CONTROLLER_OPERATION Flag;
> > - UTP_TR_PRD *PrdtBase;
> > EFI_TPL OldTpl;
> > UFS_PASS_THRU_TRANS_REQ *TransReq;
> > + EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
> >
> > - TransReq = AllocateZeroPool (sizeof (UFS_PASS_THRU_TRANS_REQ));
> > + TransReq = AllocateZeroPool (sizeof (UFS_PASS_THRU_TRANS_REQ));
> > if (TransReq == NULL) {
> > return EFI_OUT_OF_RESOURCES;
> > }
> >
> > TransReq->Signature = UFS_PASS_THRU_TRANS_REQ_SIG;
> > TransReq->TimeoutRemain = Packet->Timeout;
> > - DataBufPhyAddr = 0;
> > + TransReq->Packet = Packet;
> > +
> > UfsHc = Private->UfsHostController;
> > //
> > // Find out which slot of transfer request list is available.
> > @@ -1399,44 +1519,16 @@ UfsExecScsiCmds (
> >
> > TransReq->CmdDescSize = TransReq->Trd->PrdtO * sizeof (UINT32) +
> > TransReq->Trd->PrdtL * sizeof (UTP_TR_PRD);
> >
> > - if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
> > - DataBuf = Packet->InDataBuffer;
> > - DataLen = Packet->InTransferLength;
> > - Flag = EdkiiUfsHcOperationBusMasterWrite;
> > - } else {
> > - DataBuf = Packet->OutDataBuffer;
> > - DataLen = Packet->OutTransferLength;
> > - Flag = EdkiiUfsHcOperationBusMasterRead;
> > - }
> > -
> > - if (DataLen != 0) {
> > - MapLength = DataLen;
> > - Status = UfsHc->Map (
> > - UfsHc,
> > - Flag,
> > - DataBuf,
> > - &MapLength,
> > - &DataBufPhyAddr,
> > - &TransReq->DataBufMapping
> > - );
> > -
> > - if (EFI_ERROR (Status) || (DataLen != MapLength)) {
> > - goto Exit1;
> > - }
> > + Status = UfsPrepareDataTransferBuffer (Private, TransReq); if
> > + (EFI_ERROR (Status)) {
> > + goto Exit1;
> > }
> > - //
> > - // Fill PRDT table of Command UPIU for executed SCSI cmd.
> > - //
> > - PrdtBase = (UTP_TR_PRD*)((UINT8*)TransReq->CmdDescHost +
> > ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof
> > (UTP_RESPONSE_UPIU)));
> > - ASSERT (PrdtBase != NULL);
> > - UfsInitUtpPrdt (PrdtBase, (VOID*)(UINTN)DataBufPhyAddr, DataLen);
> >
> > //
> > // Insert the async SCSI cmd to the Async I/O list
> > //
> > if (Event != NULL) {
> > OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
> > - TransReq->Packet = Packet;
> > TransReq->CallerEvent = Event;
> > InsertTailList (&Private->Queue, &TransReq->TransferList);
> > gBS->RestoreTPL (OldTpl);
> > @@ -1515,9 +1607,7 @@ Exit:
> >
> > UfsStopExecCmd (Private, TransReq->Slot);
> >
> > - if (TransReq->DataBufMapping != NULL) {
> > - UfsHc->Unmap (UfsHc, TransReq->DataBufMapping);
> > - }
> > + UfsReconcileDataTransferBuffer (Private, TransReq);
> >
> > Exit1:
> > if (TransReq->CmdDescMapping != NULL) { @@ -1532,7 +1622,6 @@ Exit1:
> > return Status;
> > }
> >
> > -
> > /**
> > Sent UIC DME_LINKSTARTUP command to start the link startup procedure.
> >
> > @@ -2100,7 +2189,6 @@ UfsControllerStop (
> > return EFI_SUCCESS;
> > }
> >
> > -
> > /**
> > Internal helper function which will signal the caller event and clean up
> > resources.
> > @@ -2132,9 +2220,7 @@ SignalCallerEvent (
> >
> > UfsStopExecCmd (Private, TransReq->Slot);
> >
> > - if (TransReq->DataBufMapping != NULL) {
> > - UfsHc->Unmap (UfsHc, TransReq->DataBufMapping);
> > - }
> > + UfsReconcileDataTransferBuffer (Private, TransReq);
> >
> > if (TransReq->CmdDescMapping != NULL) {
> > UfsHc->Unmap (UfsHc, TransReq->CmdDescMapping);
> > --
> > 2.14.1.windows.1
> >
> > --------------------------------------------------------------------
> >
> > Intel Technology Poland sp. z o.o.
> > ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII
> > Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP
> 957-
> > 07-52-316 | Kapital zakladowy 200.000 PLN.
> >
> > Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego
> > adresata i moze zawierac informacje poufne. W razie przypadkowego
> > otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale
> > jej usuniecie; jakiekolwiek przegladanie lub rozpowszechnianie jest
> > zabronione.
> > This e-mail and any attachments may contain confidential material for the
> > sole use of the intended recipient(s). If you are not the intended recipient,
> > please contact the sender and delete all copies; any review or distribution
> by
> > others is strictly prohibited.
> >
> >
> >
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-25 1:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <15AA3FDC3F7E8A10.3441@groups.io>
2019-06-24 11:38 ` [edk2-devel] [PATCH] MdeModulePkg/UfsPassThruDxe: Fix unaligned data transfer handling Albecki, Mateusz
2019-06-25 1:44 ` Wu, Hao A
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox