From: "Wu, Hao A" <hao.a.wu@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Wu, Hao A" <hao.a.wu@intel.com>,
"Agrawal, Sachin" <sachin.agrawal@intel.com>
Cc: "Ni, Ray" <ray.ni@intel.com>
Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThru : Fix UFS flag read from Query Resp UPIU
Date: Tue, 15 Oct 2019 01:56:01 +0000 [thread overview]
Message-ID: <B80AF82E9BFB8E4FBD8C89DA810C6A093C947578@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <B80AF82E9BFB8E4FBD8C89DA810C6A093C935F90@SHSMSX104.ccr.corp.intel.com>
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Wu, Hao A
> Sent: Thursday, September 26, 2019 9:40 AM
> To: devel@edk2.groups.io; Agrawal, Sachin
> Cc: Ni, Ray
> Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThru : Fix UFS
> flag read from Query Resp UPIU
>
> > -----Original Message-----
> > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> > Agrawal, Sachin
> > Sent: Monday, September 23, 2019 7:48 PM
> > To: devel@edk2.groups.io
> > Cc: Agrawal, Sachin; Wu, Hao A; Ni, Ray
> > Subject: [edk2-devel] [PATCH] MdeModulePkg/UfsPassThru : Fix UFS flag
> > read from Query Resp UPIU
>
>
> When pushing the patch, I will change the subject a little bit to:
> MdeModulePkg/Ufs : Fix UFS flag read from Query Resp UPIU
>
> Other than this, the patch looks good to me:
> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Patch pushed via commit cd70b1a71d.
Best Regards,
Hao Wu
>
> Best Regards,
> Hao Wu
>
>
> >
> > As per UFS spec, flag value is stored in the 'last byte' of value
> > field. Existing code is attempting to read first byte.
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2208
> >
> > Test: Verified the Fix by sending command to set fPowerOnWPEn flag
> > and then reading it to verify the set value.
> >
> > Cc: Hao A Wu <hao.a.wu@intel.com>
> > Cc: Ray Ni <ray.ni@intel.com>
> >
> > Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
> > ---
> > MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c | 5 ++++-
> > MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c | 5 ++++-
> > 2 files changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c
> > b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c
> > index e8ef0c2a7a..e450f6f49d 100644
> > --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c
> > +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c
> > @@ -977,7 +977,10 @@ UfsRwFlags (
> > }
> >
> > if (Trd->Ocs == 0) {
> > - *Value = (UINT8)QueryResp->Tsf.Value;
> > + //
> > + // The 'FLAG VALUE' field is at byte offset 3 of QueryResp->Tsf.Value
> > + //
> > + *Value = *((UINT8*)&(QueryResp->Tsf.Value) + 3);
> > } else {
> > Status = EFI_DEVICE_ERROR;
> > }
> > diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > index 0b95e7dddd..93ac958f65 100644
> > --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
> > @@ -863,7 +863,10 @@ UfsGetReturnDataFromQueryResponse (
> > case UtpQueryFuncOpcodeSetFlag:
> > case UtpQueryFuncOpcodeClrFlag:
> > case UtpQueryFuncOpcodeTogFlag:
> > - CopyMem (Packet->DataBuffer, &QueryResp->Tsf.Value, sizeof
> (UINT8));
> > + //
> > + // The 'FLAG VALUE' field is at byte offset 3 of QueryResp->Tsf.Value
> > + //
> > + *((UINT8*)(Packet->DataBuffer)) = *((UINT8*)&(QueryResp-
> >Tsf.Value)
> > + 3);
> > break;
> > case UtpQueryFuncOpcodeRdAttr:
> > case UtpQueryFuncOpcodeWrAttr:
> > --
> > 2.14.3.windows.1
> >
> >
> >
>
>
>
prev parent reply other threads:[~2019-10-15 1:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-23 11:48 [PATCH] MdeModulePkg/UfsPassThru : Fix UFS flag read from Query Resp UPIU sachin.agrawal
2019-09-26 1:40 ` [edk2-devel] " Wu, Hao A
2019-10-15 1:56 ` Wu, Hao A [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B80AF82E9BFB8E4FBD8C89DA810C6A093C947578@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox