From: "Wu, Hao A" <hao.a.wu@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Albecki, Mateusz" <mateusz.albecki@intel.com>,
"Gao, Zhichao" <zhichao.gao@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Marcin Wojtas <mw@semihalf.com>
Subject: Re: [edk2-devel] [PATCH 0/2] MdeModulePkg/SdMmcPciHcDxe: Send the EdkiiSdMmcSwitchClockFreq notification before sending CMD13
Date: Mon, 6 Jan 2020 06:10:32 +0000 [thread overview]
Message-ID: <B80AF82E9BFB8E4FBD8C89DA810C6A093C9900F9@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <B80AF82E9BFB8E4FBD8C89DA810C6A093C990008@SHSMSX104.ccr.corp.intel.com>
Series has been pushed via commits b948a49615..f68cb23c14.
Best Regards,
Hao Wu
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Wu, Hao A
> Sent: Monday, January 06, 2020 1:19 PM
> To: Marcin Wojtas
> Cc: Albecki, Mateusz; devel@edk2.groups.io; Gao, Zhichao; Gao, Liming; Ard
> Biesheuvel
> Subject: Re: [edk2-devel] [PATCH 0/2] MdeModulePkg/SdMmcPciHcDxe:
> Send the EdkiiSdMmcSwitchClockFreq notification before sending CMD13
>
> > -----Original Message-----
> > From: Marcin Wojtas [mailto:mw@semihalf.com]
> > Sent: Friday, January 03, 2020 7:05 PM
> > To: Wu, Hao A
> > Cc: Albecki, Mateusz; devel@edk2.groups.io; Gao, Zhichao; Gao, Liming;
> Ard
> > Biesheuvel
> > Subject: Re: [PATCH 0/2] MdeModulePkg/SdMmcPciHcDxe: Send the
> > EdkiiSdMmcSwitchClockFreq notification before sending CMD13
> >
> > Hi,
> >
> > wt., 24 gru 2019 o 03:52 Wu, Hao A <hao.a.wu@intel.com> napisał(a):
> > >
> > > > -----Original Message-----
> > > > From: Albecki, Mateusz
> > > > Sent: Saturday, December 21, 2019 1:13 AM
> > > > To: devel@edk2.groups.io
> > > > Cc: Albecki, Mateusz; Wu, Hao A; Marcin Wojtas; Gao, Zhichao; Gao,
> > Liming
> > > > Subject: [PATCH 0/2] MdeModulePkg/SdMmcPciHcDxe: Send the
> > > > EdkiiSdMmcSwitchClockFreq notification before sending CMD13
> > > >
> > > > The first patch refactors the SdMmcClockSupply function with a goal
> > > > of sending the EdkiiSdMmcSwitchClockFreq notification before we send
> > the
> > > > CMD13 to check the switch status in eMMC init flow. This is required to
> > > > avoid sending the CMD13 on link that still has not been fixed by
> platform.
> > > >
> > > > To avoid changing the driver behavior we avoid sending notifications
> > > > when the clock is setup for the first time or when we setup the clock
> > > > after the voltage switch procedure(adressed in second patch).
> > > >
> > > > The second patch in the series optimizes the SD card detection routine
> > > > to stop it from going through the process of internal clock setup
> > > > after switching the voltage. According to SD HC specification there
> > > > is no need to setup internal clock all over again.
> > > >
> > > > Tests performed:
> > > > - Booted eMMC in HS400 mode on platform which required post clock
> > freq
> > > > fixes
> > > >
> > > > I wasn't able to test SD card yet due to the lack of setup with working
> SD.
> > >
> > >
> > > I performed a quick verification on the eMMC device and SD card on my
> > side.
> > > They work properly after the series.
> > >
> > > So for the series,
> > > Tested-by: Hao A Wu <hao.a.wu@intel.com>
> > >
> >
> > I verified eMMC HS200 / HS@50MHz and SD cards on 2 Armada platforms,
> so:
> > Tested-by: Marcin Wojtas <mw@semihalf.com>
>
>
> Thanks for the testing effort.
> I will push the series soon.
>
> Best Regards,
> Hao Wu
>
>
> >
> > Best regards,
> > Marcin
> >
> > >
> > > >
> > > > The patch series is available on github here:
> > > > https://github.com/malbecki/edk2/tree/sdmmc_post_freq_notify
> > >
> > >
> > > Add Ard to the loop to see if there is additional comment.
> > >
> > > Best Regards,
> > > Hao Wu
> > >
> > >
> > > >
> > > > Cc: Hao A Wu <hao.a.wu@intel.com>
> > > > Cc: Marcin Wojtas <mw@semihalf.com>
> > > > Cc: Zhichao Gao <zhichao.gao@intel.com>
> > > > Cc: Liming Gao <liming.gao@intel.com>
> > > >
> > > > Mateusz Albecki (2):
> > > > SdMmcPciHcDxe: Send EdkiiSdMmcSwitchClockFreq after SD clock
> start
> > > > MdeModulePkg/SdMmcPciHcDxe: Add function to start SD clock
> > > >
> > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c | 20 +--
> > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 25 +---
> > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.h | 24
> ++++
> > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c | 136
> > > > +++++++++++----------
> > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h | 45 ++----
> -
> > > > 5 files changed, 112 insertions(+), 138 deletions(-)
> > > >
> > > > --
> > > > 2.14.1.windows.1
> > >
>
>
prev parent reply other threads:[~2020-01-06 6:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 17:13 [PATCH 0/2] MdeModulePkg/SdMmcPciHcDxe: Send the EdkiiSdMmcSwitchClockFreq notification before sending CMD13 Albecki, Mateusz
2019-12-20 17:13 ` [PATCH 1/2] SdMmcPciHcDxe: Send EdkiiSdMmcSwitchClockFreq after SD clock start Albecki, Mateusz
2019-12-24 2:52 ` Wu, Hao A
2019-12-24 9:54 ` Ard Biesheuvel
2019-12-30 8:44 ` Marcin Wojtas
2019-12-31 14:49 ` Albecki, Mateusz
2019-12-20 17:13 ` [PATCH 2/2] MdeModulePkg/SdMmcPciHcDxe: Add function to start SD clock Albecki, Mateusz
2019-12-24 2:52 ` Wu, Hao A
2019-12-24 2:51 ` [PATCH 0/2] MdeModulePkg/SdMmcPciHcDxe: Send the EdkiiSdMmcSwitchClockFreq notification before sending CMD13 Wu, Hao A
2020-01-03 11:04 ` Marcin Wojtas
2020-01-06 5:18 ` Wu, Hao A
2020-01-06 6:10 ` Wu, Hao A [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B80AF82E9BFB8E4FBD8C89DA810C6A093C9900F9@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox