From: "Zhu, Yonghong" <yonghong.zhu@intel.com>
To: "Carsey, Jaben" <jaben.carsey@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Gao, Liming" <liming.gao@intel.com>,
"Zhu, Yonghong" <yonghong.zhu@intel.com>
Subject: Re: [PATCH v1 2/2] BaseTools: Remove unneeded files
Date: Sun, 8 Apr 2018 08:16:34 +0000 [thread overview]
Message-ID: <B9726D6DCCFB8B4CA276A9169B02216D51FDA8D2@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <be1b1ab76e89101fc8200d47a2acd9bae51ff11b.1522854049.git.jaben.carsey@intel.com>
Hi Jaben,
1. the BaseTools/Source/Python/Makefile also need remove those .py files, otherwise it would cause freeze binary failure.
2. EdkIIWorkspaceBuild.py use some function in those .py files, but in fact the EdkIIWorkspaceBuild.py also can be removed, so how about in your V2 patch also remove this file ?
Best Regards,
Zhu Yonghong
-----Original Message-----
From: Carsey, Jaben
Sent: Wednesday, April 04, 2018 11:02 PM
To: edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong <yonghong.zhu@intel.com>
Subject: [PATCH v1 2/2] BaseTools: Remove unneeded files
These files are not used by any tool:
BaseTools/Source/Python/Common/DecClassObject.py
BaseTools/Source/Python/Common/DscClassObject.py
BaseTools/Source/Python/Common/FdfClassObject.py
BaseTools/Source/Python/Common/InfClassObject.py
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
---
BaseTools/Source/Python/Common/DecClassObject.py | 553 --------
BaseTools/Source/Python/Common/DscClassObject.py | 1434 --------------------
BaseTools/Source/Python/Common/FdfClassObject.py | 106 --
BaseTools/Source/Python/Common/InfClassObject.py | 1105 ---------------
4 files changed, 3198 deletions(-)
diff --git a/BaseTools/Source/Python/Common/DecClassObject.py b/BaseTools/Source/Python/Common/DecClassObject.py
deleted file mode 100644
index ed998d3b677d..000000000000
--- a/BaseTools/Source/Python/Common/DecClassObject.py
+++ /dev/null
@@ -1,553 +0,0 @@
-## @file
-# This file is used to define each component of DEC file
-#
-# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-##
-# Import Modules
-#
-import Common.LongFilePathOs as os
-from String import *
-from DataType import *
-from Identification import *
-from Dictionary import *
-from CommonDataClass.PackageClass import *
-from CommonDataClass.CommonClass import PcdClass
-from BuildToolError import *
-from Table.TableDec import TableDec
-import Database
-from Parsing import *
-import GlobalData
-from Common.LongFilePathSupport import OpenLongFilePath as open
-
-#
-# Global variable
-#
-Section = {TAB_UNKNOWN.upper() : MODEL_UNKNOWN,
- TAB_DEC_DEFINES.upper() : MODEL_META_DATA_HEADER,
- TAB_INCLUDES.upper() : MODEL_EFI_INCLUDE,
- TAB_LIBRARY_CLASSES.upper() : MODEL_EFI_LIBRARY_CLASS,
- TAB_COMPONENTS.upper() : MODEL_META_DATA_COMPONENT,
- TAB_GUIDS.upper() : MODEL_EFI_GUID,
- TAB_PROTOCOLS.upper() : MODEL_EFI_PROTOCOL,
- TAB_PPIS.upper() : MODEL_EFI_PPI,
- TAB_PCDS_FIXED_AT_BUILD_NULL.upper() : MODEL_PCD_FIXED_AT_BUILD,
- TAB_PCDS_PATCHABLE_IN_MODULE_NULL.upper() : MODEL_PCD_PATCHABLE_IN_MODULE,
- TAB_PCDS_FEATURE_FLAG_NULL.upper() : MODEL_PCD_FEATURE_FLAG,
- TAB_PCDS_DYNAMIC_EX_NULL.upper() : MODEL_PCD_DYNAMIC_EX,
- TAB_PCDS_DYNAMIC_NULL.upper() : MODEL_PCD_DYNAMIC,
- TAB_USER_EXTENSIONS.upper() : MODEL_META_DATA_USER_EXTENSION
- }
-
-
-## Dec
-#
-# This class defined the structure used in Dec object
-#
-# @param Filename: Input value for Filename of Dec file, default is None
-# @param IsMergeAllArches: Input value for IsMergeAllArches
-# True is to merge all arches
-# Fales is not to merge all arches
-# default is False
-# @param IsToPackage: Input value for IsToPackage
-# True is to transfer to PackageObject automatically
-# False is not to transfer to PackageObject automatically
-# default is False
-# @param WorkspaceDir: Input value for current workspace directory, default is None
-#
-# @var Identification: To store value for Identification, it is a structure as Identification
-# @var Defines: To store value for Defines, it is a structure as DecDefines
-# @var UserExtensions: To store value for UserExtensions
-# @var Package: To store value for Package, it is a structure as PackageClass
-# @var WorkspaceDir: To store value for WorkspaceDir
-# @var Contents: To store value for Contents, it is a structure as DecContents
-# @var KeyList: To store value for KeyList, a list for all Keys used in Dec
-#
-class Dec(object):
- def __init__(self, Filename=None, IsToDatabase=False, IsToPackage=False, WorkspaceDir=None, Database=None, SupArchList=DataType.ARCH_LIST):
- self.Identification = Identification()
- self.Package = PackageClass()
- self.UserExtensions = ''
- self.WorkspaceDir = WorkspaceDir
- self.SupArchList = SupArchList
- self.IsToDatabase = IsToDatabase
-
- self.Cur = Database.Cur
- self.TblFile = Database.TblFile
- self.TblDec = Database.TblDec
- self.FileID = -1
-
- self.KeyList = [
- TAB_INCLUDES, TAB_GUIDS, TAB_PROTOCOLS, TAB_PPIS, TAB_LIBRARY_CLASSES, \
- TAB_PCDS_FIXED_AT_BUILD_NULL, TAB_PCDS_PATCHABLE_IN_MODULE_NULL, TAB_PCDS_FEATURE_FLAG_NULL, \
- TAB_PCDS_DYNAMIC_NULL, TAB_PCDS_DYNAMIC_EX_NULL, TAB_DEC_DEFINES
- ]
- #
- # Upper all KEYs to ignore case sensitive when parsing
- #
- self.KeyList = map(lambda c: c.upper(), self.KeyList)
-
- #
- # Init RecordSet
- #
- self.RecordSet = {}
- for Key in self.KeyList:
- self.RecordSet[Section[Key]] = []
-
- #
- # Load Dec file if filename is not None
- #
- if Filename is not None:
- self.LoadDecFile(Filename)
-
- #
- # Transfer to Package Object if IsToPackage is True
- #
- if IsToPackage:
- self.DecToPackage()
-
- ## Load Dec file
- #
- # Load the file if it exists
- #
- # @param Filename: Input value for filename of Dec file
- #
- def LoadDecFile(self, Filename):
- #
- # Insert a record for file
- #
- Filename = NormPath(Filename)
- self.Identification.FileFullPath = Filename
- (self.Identification.FileRelativePath, self.Identification.FileName) = os.path.split(Filename)
- self.FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_DEC)
-
- #
- # Init DecTable
- #
- #self.TblDec.Table = "Dec%s" % self.FileID
- #self.TblDec.Create()
-
- #
- # Init common datas
- #
- IfDefList, SectionItemList, CurrentSection, ArchList, ThirdList, IncludeFiles = \
- [], [], TAB_UNKNOWN, [], [], []
- LineNo = 0
-
- #
- # Parse file content
- #
- IsFindBlockComment = False
- ReservedLine = ''
- for Line in open(Filename, 'r'):
- LineNo = LineNo + 1
- #
- # Remove comment block
- #
- if Line.find(TAB_COMMENT_EDK_START) > -1:
- ReservedLine = GetSplitList(Line, TAB_COMMENT_EDK_START, 1)[0]
- IsFindBlockComment = True
- if Line.find(TAB_COMMENT_EDK_END) > -1:
- Line = ReservedLine + GetSplitList(Line, TAB_COMMENT_EDK_END, 1)[1]
- ReservedLine = ''
- IsFindBlockComment = False
- if IsFindBlockComment:
- continue
-
- #
- # Remove comments at tail and remove spaces again
- #
- Line = CleanString(Line)
- if Line == '':
- continue
-
- #
- # Find a new section tab
- # First insert previous section items
- # And then parse the content of the new section
- #
- if Line.startswith(TAB_SECTION_START) and Line.endswith(TAB_SECTION_END):
- #
- # Insert items data of previous section
- #
- Model = Section[CurrentSection.upper()]
- InsertSectionItemsIntoDatabase(self.TblDec, self.FileID, Filename, Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList, self.RecordSet)
-
- #
- # Parse the new section
- #
- SectionItemList = []
- ArchList = []
- ThirdList = []
-
- CurrentSection = ''
- LineList = GetSplitValueList(Line[len(TAB_SECTION_START):len(Line) - len(TAB_SECTION_END)], TAB_COMMA_SPLIT)
- for Item in LineList:
- ItemList = GetSplitValueList(Item, TAB_SPLIT)
- if CurrentSection == '':
- CurrentSection = ItemList[0]
- else:
- if CurrentSection != ItemList[0]:
- EdkLogger.error("Parser", PARSER_ERROR, "Different section names '%s' and '%s' are found in one section definition, this is not allowed." % (CurrentSection, ItemList[0]), File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
- if CurrentSection.upper() not in self.KeyList:
- RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
- ItemList.append('')
- ItemList.append('')
- if len(ItemList) > 5:
- RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
- else:
- if ItemList[1] != '' and ItemList[1].upper() not in ARCH_LIST_FULL:
- EdkLogger.error("Parser", PARSER_ERROR, "Invalid Arch definition '%s' found" % ItemList[1], File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
- ArchList.append(ItemList[1].upper())
- ThirdList.append(ItemList[2])
-
- continue
-
- #
- # Not in any defined section
- #
- if CurrentSection == TAB_UNKNOWN:
- ErrorMsg = "%s is not in any defined section" % Line
- EdkLogger.error("Parser", PARSER_ERROR, ErrorMsg, File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
-
- #
- # Add a section item
- #
- SectionItemList.append([Line, LineNo])
- # End of parse
- #End of For
-
- #
- # Insert items data of last section
- #
- Model = Section[CurrentSection.upper()]
- InsertSectionItemsIntoDatabase(self.TblDec, self.FileID, Filename, Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList, self.RecordSet)
-
- #
- # Replace all DEFINE macros with its actual values
- #
- ParseDefineMacro2(self.TblDec, self.RecordSet, GlobalData.gGlobalDefines)
-
- ## Transfer to Package Object
- #
- # Transfer all contents of a Dec file to a standard Package Object
- #
- def DecToPackage(self):
- #
- # Init global information for the file
- #
- ContainerFile = self.Identification.FileFullPath
-
- #
- # Generate Package Header
- #
- self.GenPackageHeader(ContainerFile)
-
- #
- # Generate Includes
- #
- self.GenIncludes(ContainerFile)
-
- #
- # Generate Guids
- #
- self.GenGuidProtocolPpis(DataType.TAB_GUIDS, ContainerFile)
-
- #
- # Generate Protocols
- #
- self.GenGuidProtocolPpis(DataType.TAB_PROTOCOLS, ContainerFile)
-
- #
- # Generate Ppis
- #
- self.GenGuidProtocolPpis(DataType.TAB_PPIS, ContainerFile)
-
- #
- # Generate LibraryClasses
- #
- self.GenLibraryClasses(ContainerFile)
-
- #
- # Generate Pcds
- #
- self.GenPcds(ContainerFile)
-
- ## Get Package Header
- #
- # Gen Package Header of Dec as <Key> = <Value>
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenPackageHeader(self, ContainerFile):
- EdkLogger.debug(2, "Generate PackageHeader ...")
- #
- # Update all defines item in database
- #
- RecordSet = self.RecordSet[MODEL_META_DATA_HEADER]
- for Record in RecordSet:
- ValueList = GetSplitValueList(Record[0], TAB_EQUAL_SPLIT)
- if len(ValueList) != 2:
- RaiseParserError(Record[0], 'Defines', ContainerFile, '<Key> = <Value>', Record[2])
- ID, Value1, Value2, Arch, LineNo = Record[3], ValueList[0], ValueList[1], Record[1], Record[2]
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
- where ID = %s""" % (self.TblDec.Table, ConvertToSqlString2(Value1), ConvertToSqlString2(Value2), ID)
- self.TblDec.Exec(SqlCommand)
-
- #
- # Get detailed information
- #
- for Arch in self.SupArchList:
- PackageHeader = PackageHeaderClass()
-
- PackageHeader.Name = QueryDefinesItem(self.TblDec, TAB_DEC_DEFINES_PACKAGE_NAME, Arch, self.FileID)[0]
- PackageHeader.Guid = QueryDefinesItem(self.TblDec, TAB_DEC_DEFINES_PACKAGE_GUID, Arch, self.FileID)[0]
- PackageHeader.Version = QueryDefinesItem(self.TblDec, TAB_DEC_DEFINES_PACKAGE_VERSION, Arch, self.FileID)[0]
- PackageHeader.FileName = self.Identification.FileName
- PackageHeader.FullPath = self.Identification.FileFullPath
- PackageHeader.DecSpecification = QueryDefinesItem(self.TblDec, TAB_DEC_DEFINES_DEC_SPECIFICATION, Arch, self.FileID)[0]
-
- self.Package.Header[Arch] = PackageHeader
-
- ## GenIncludes
- #
- # Gen Includes of Dec
- #
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenIncludes(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_INCLUDES)
- Includes = {}
- #
- # Get all Includes
- #
- RecordSet = self.RecordSet[MODEL_EFI_INCLUDE]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- MergeArches(Includes, Record[0], Arch)
-
- for Key in Includes.keys():
- Include = IncludeClass()
- Include.FilePath = NormPath(Key)
- Include.SupArchList = Includes[Key]
- self.Package.Includes.append(Include)
-
- ## GenPpis
- #
- # Gen Ppis of Dec
- # <CName>=<GuidValue>
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenGuidProtocolPpis(self, Type, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % Type)
- Lists = {}
- #
- # Get all Items
- #
- RecordSet = self.RecordSet[Section[Type.upper()]]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (Name, Value) = GetGuidsProtocolsPpisOfDec(Record[0], Type, ContainerFile, Record[2])
- MergeArches(Lists, (Name, Value), Arch)
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
- where ID = %s""" % (self.TblDec.Table, ConvertToSqlString2(Name), ConvertToSqlString2(Value), Record[3])
- self.TblDec.Exec(SqlCommand)
-
- ListMember = None
- if Type == TAB_GUIDS:
- ListMember = self.Package.GuidDeclarations
- elif Type == TAB_PROTOCOLS:
- ListMember = self.Package.ProtocolDeclarations
- elif Type == TAB_PPIS:
- ListMember = self.Package.PpiDeclarations
-
- for Key in Lists.keys():
- ListClass = GuidProtocolPpiCommonClass()
- ListClass.CName = Key[0]
- ListClass.Guid = Key[1]
- ListClass.SupArchList = Lists[Key]
- ListMember.append(ListClass)
-
-
- ## GenLibraryClasses
- #
- # Gen LibraryClasses of Dec
- # <CName>=<GuidValue>
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenLibraryClasses(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARY_CLASSES)
- LibraryClasses = {}
- #
- # Get all Guids
- #
- RecordSet = self.RecordSet[MODEL_EFI_LIBRARY_CLASS]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- List = GetSplitValueList(Record[0], DataType.TAB_VALUE_SPLIT)
- if len(List) != 2:
- RaiseParserError(Record[0], 'LibraryClasses', ContainerFile, '<LibraryClassName>|<LibraryClassInstanceFilename>', Record[2])
- else:
- CheckFileExist(self.Identification.FileRelativePath, List[1], ContainerFile, 'LibraryClasses', Record[0])
- MergeArches(LibraryClasses, (List[0], List[1]), Arch)
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s', Value3 = '%s'
- where ID = %s""" % (self.TblDec.Table, ConvertToSqlString2(List[0]), ConvertToSqlString2(List[1]), SUP_MODULE_LIST_STRING, Record[3])
- self.TblDec.Exec(SqlCommand)
-
-
- for Key in LibraryClasses.keys():
- LibraryClass = LibraryClassClass()
- LibraryClass.LibraryClass = Key[0]
- LibraryClass.RecommendedInstance = NormPath(Key[1])
- LibraryClass.SupModuleList = SUP_MODULE_LIST
- LibraryClass.SupArchList = LibraryClasses[Key]
- self.Package.LibraryClassDeclarations.append(LibraryClass)
-
- ## GenPcds
- #
- # Gen Pcds of Dec
- # <TokenSpcCName>.<TokenCName>|<Value>|<DatumType>|<Token>
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenPcds(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_PCDS)
- Pcds = {}
- PcdToken = {}
- #
- # Get all Guids
- #
- RecordSet1 = self.RecordSet[MODEL_PCD_FIXED_AT_BUILD]
- RecordSet2 = self.RecordSet[MODEL_PCD_PATCHABLE_IN_MODULE]
- RecordSet3 = self.RecordSet[MODEL_PCD_FEATURE_FLAG]
- RecordSet4 = self.RecordSet[MODEL_PCD_DYNAMIC_EX]
- RecordSet5 = self.RecordSet[MODEL_PCD_DYNAMIC]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet1:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, DatumType, Token, Type) = GetPcdOfDec(Record[0], TAB_PCDS_FIXED_AT_BUILD, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, DatumType, Token, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet2:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, DatumType, Token, Type) = GetPcdOfDec(Record[0], TAB_PCDS_PATCHABLE_IN_MODULE, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, DatumType, Token, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet3:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, DatumType, Token, Type) = GetPcdOfDec(Record[0], TAB_PCDS_FEATURE_FLAG, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, DatumType, Token, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet4:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, DatumType, Token, Type) = GetPcdOfDec(Record[0], TAB_PCDS_DYNAMIC_EX, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, DatumType, Token, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet5:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, DatumType, Token, Type) = GetPcdOfDec(Record[0], TAB_PCDS_DYNAMIC, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, DatumType, Token, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- #
- # Update to database
- #
- if self.IsToDatabase:
- for Key in PcdToken.keys():
- SqlCommand = """update %s set Value2 = '%s' where ID = %s""" % (self.TblDec.Table, ".".join((PcdToken[Key][0], PcdToken[Key][1])), Key)
- self.TblDec.Exec(SqlCommand)
-
- for Key in Pcds.keys():
- Pcd = PcdClass()
- Pcd.CName = Key[1]
- Pcd.Token = Key[4]
- Pcd.TokenSpaceGuidCName = Key[0]
- Pcd.DatumType = Key[3]
- Pcd.DefaultValue = Key[2]
- Pcd.ItemType = Key[5]
- Pcd.SupArchList = Pcds[Key]
- self.Package.PcdDeclarations.append(Pcd)
-
- ## Show detailed information of Package
- #
- # Print all members and their values of Package class
- #
- def ShowPackage(self):
- M = self.Package
- for Arch in M.Header.keys():
- print '\nArch =', Arch
- print 'Filename =', M.Header[Arch].FileName
- print 'FullPath =', M.Header[Arch].FullPath
- print 'BaseName =', M.Header[Arch].Name
- print 'Guid =', M.Header[Arch].Guid
- print 'Version =', M.Header[Arch].Version
- print 'DecSpecification =', M.Header[Arch].DecSpecification
- print '\nIncludes =', M.Includes
- for Item in M.Includes:
- print Item.FilePath, Item.SupArchList
- print '\nGuids =', M.GuidDeclarations
- for Item in M.GuidDeclarations:
- print Item.CName, Item.Guid, Item.SupArchList
- print '\nProtocols =', M.ProtocolDeclarations
- for Item in M.ProtocolDeclarations:
- print Item.CName, Item.Guid, Item.SupArchList
- print '\nPpis =', M.PpiDeclarations
- for Item in M.PpiDeclarations:
- print Item.CName, Item.Guid, Item.SupArchList
- print '\nLibraryClasses =', M.LibraryClassDeclarations
- for Item in M.LibraryClassDeclarations:
- print Item.LibraryClass, Item.RecommendedInstance, Item.SupModuleList, Item.SupArchList
- print '\nPcds =', M.PcdDeclarations
- for Item in M.PcdDeclarations:
- print 'CName=', Item.CName, 'TokenSpaceGuidCName=', Item.TokenSpaceGuidCName, 'DefaultValue=', Item.DefaultValue, 'ItemType=', Item.ItemType, 'Token=', Item.Token, 'DatumType=', Item.DatumType, Item.SupArchList
-
-##
-#
-# This acts like the main() function for the script, unless it is 'import'ed into another
-# script.
-#
-if __name__ == '__main__':
- EdkLogger.Initialize()
- EdkLogger.SetLevel(EdkLogger.DEBUG_0)
-
- W = os.getenv('WORKSPACE')
- F = os.path.join(W, 'Nt32Pkg/Nt32Pkg.dec')
-
- Db = Database.Database('Dec.db')
- Db.InitDatabase()
-
- P = Dec(os.path.normpath(F), True, True, W, Db)
- P.ShowPackage()
-
- Db.Close()
diff --git a/BaseTools/Source/Python/Common/DscClassObject.py b/BaseTools/Source/Python/Common/DscClassObject.py
deleted file mode 100644
index da3101ae0fe9..000000000000
--- a/BaseTools/Source/Python/Common/DscClassObject.py
+++ /dev/null
@@ -1,1434 +0,0 @@
-## @file
-# This file is used to define each component of DSC file
-#
-# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-##
-# Import Modules
-#
-import Common.LongFilePathOs as os
-import EdkLogger as EdkLogger
-import Database
-from String import *
-from Parsing import *
-from DataType import *
-from Identification import *
-from Dictionary import *
-from CommonDataClass.PlatformClass import *
-from CommonDataClass.CommonClass import SkuInfoClass
-from BuildToolError import *
-from Misc import sdict
-import GlobalData
-from Table.TableDsc import TableDsc
-from Common.LongFilePathSupport import OpenLongFilePath as open
-
-#
-# Global variable
-#
-Section = {TAB_UNKNOWN.upper() : MODEL_UNKNOWN,
- TAB_DSC_DEFINES.upper() : MODEL_META_DATA_HEADER,
- TAB_BUILD_OPTIONS.upper() : MODEL_META_DATA_BUILD_OPTION,
- TAB_SKUIDS.upper() : MODEL_EFI_SKU_ID,
- TAB_LIBRARIES.upper() : MODEL_EFI_LIBRARY_INSTANCE,
- TAB_LIBRARY_CLASSES.upper() : MODEL_EFI_LIBRARY_CLASS,
- TAB_PCDS_FIXED_AT_BUILD_NULL.upper() : MODEL_PCD_FIXED_AT_BUILD,
- TAB_PCDS_PATCHABLE_IN_MODULE_NULL.upper() : MODEL_PCD_PATCHABLE_IN_MODULE,
- TAB_PCDS_FEATURE_FLAG_NULL.upper() : MODEL_PCD_FEATURE_FLAG,
- TAB_PCDS_DYNAMIC_EX_NULL.upper() : MODEL_PCD_DYNAMIC_EX,
- TAB_PCDS_DYNAMIC_EX_DEFAULT_NULL.upper() : MODEL_PCD_DYNAMIC_EX_DEFAULT,
- TAB_PCDS_DYNAMIC_EX_VPD_NULL.upper() : MODEL_PCD_DYNAMIC_EX_VPD,
- TAB_PCDS_DYNAMIC_EX_HII_NULL.upper() : MODEL_PCD_DYNAMIC_EX_HII,
- TAB_PCDS_DYNAMIC_NULL.upper() : MODEL_PCD_DYNAMIC,
- TAB_PCDS_DYNAMIC_DEFAULT_NULL.upper() : MODEL_PCD_DYNAMIC_DEFAULT,
- TAB_PCDS_DYNAMIC_VPD_NULL.upper() : MODEL_PCD_DYNAMIC_VPD,
- TAB_PCDS_DYNAMIC_HII_NULL.upper() : MODEL_PCD_DYNAMIC_HII,
- TAB_COMPONENTS.upper() : MODEL_META_DATA_COMPONENT,
- TAB_USER_EXTENSIONS.upper() : MODEL_META_DATA_USER_EXTENSION
- }
-
-## Dsc
-#
-# This class defined the structure used in Dsc object
-#
-# @param Ffilename: Input value for Ffilename of Inf file, default is None
-# @param IsMergeAllArches: Input value for IsMergeAllArches
-# True is to merge all arches
-# Fales is not to merge all arches
-# default is False
-# @param IsToPlatform: Input value for IsToPlatform
-# True is to transfer to ModuleObject automatically
-# False is not to transfer to ModuleObject automatically
-# default is False
-# @param WorkspaceDir: Input value for current workspace directory, default is None
-#
-# @var _NullClassIndex: To store value for _NullClassIndex, default is 0
-# @var Identification: To store value for Identification, it is a structure as Identification
-# @var Defines: To store value for Defines, it is a structure as DscDefines
-# @var Contents: To store value for Contents, it is a structure as DscContents
-# @var UserExtensions: To store value for UserExtensions
-# @var Platform: To store value for Platform, it is a structure as PlatformClass
-# @var WorkspaceDir: To store value for WorkspaceDir
-# @var KeyList: To store value for KeyList, a list for all Keys used in Dec
-#
-class Dsc(object):
- _NullClassIndex = 0
-
- def __init__(self, Filename=None, IsToDatabase=False, IsToPlatform=False, WorkspaceDir=None, Database=None):
- self.Identification = Identification()
- self.Platform = PlatformClass()
- self.UserExtensions = ''
- self.WorkspaceDir = WorkspaceDir
- self.IsToDatabase = IsToDatabase
- if Database:
- self.Cur = Database.Cur
- self.TblFile = Database.TblFile
- self.TblDsc = Database.TblDsc
-
- self.KeyList = [
- TAB_SKUIDS, TAB_LIBRARIES, TAB_LIBRARY_CLASSES, TAB_BUILD_OPTIONS, TAB_PCDS_FIXED_AT_BUILD_NULL, \
- TAB_PCDS_PATCHABLE_IN_MODULE_NULL, TAB_PCDS_FEATURE_FLAG_NULL, \
- TAB_PCDS_DYNAMIC_DEFAULT_NULL, TAB_PCDS_DYNAMIC_HII_NULL, TAB_PCDS_DYNAMIC_VPD_NULL, \
- TAB_PCDS_DYNAMIC_EX_DEFAULT_NULL, TAB_PCDS_DYNAMIC_EX_HII_NULL, TAB_PCDS_DYNAMIC_EX_VPD_NULL, \
- TAB_COMPONENTS, TAB_DSC_DEFINES
- ]
-
- self.PcdToken = {}
-
- #
- # Upper all KEYs to ignore case sensitive when parsing
- #
- self.KeyList = map(lambda c: c.upper(), self.KeyList)
-
- #
- # Init RecordSet
- #
-# self.RecordSet = {}
-# for Key in self.KeyList:
-# self.RecordSet[Section[Key]] = []
-
- #
- # Load Dsc file if filename is not None
- #
- if Filename is not None:
- self.LoadDscFile(Filename)
-
- #
- # Transfer to Platform Object if IsToPlatform is True
- #
- if IsToPlatform:
- self.DscToPlatform()
-
- ## Transfer to Platform Object
- #
- # Transfer all contents of an Inf file to a standard Module Object
- #
- def DscToPlatform(self):
- #
- # Init global information for the file
- #
- ContainerFile = self.Identification.FileFullPath
-
- #
- # Generate Platform Header
- #
- self.GenPlatformHeader(ContainerFile)
-
- #
- # Generate BuildOptions
- #
- self.GenBuildOptions(ContainerFile)
-
- #
- # Generate SkuInfos
- #
- self.GenSkuInfos(ContainerFile)
-
- #
- # Generate Libraries
- #
- self.GenLibraries(ContainerFile)
-
- #
- # Generate LibraryClasses
- #
- self.GenLibraryClasses(ContainerFile)
-
- #
- # Generate Pcds
- #
- self.GenPcds(DataType.TAB_PCDS_FIXED_AT_BUILD, ContainerFile)
- self.GenPcds(DataType.TAB_PCDS_PATCHABLE_IN_MODULE, ContainerFile)
- self.GenFeatureFlagPcds(DataType.TAB_PCDS_FEATURE_FLAG, ContainerFile)
- self.GenDynamicDefaultPcds(DataType.TAB_PCDS_DYNAMIC_DEFAULT, ContainerFile)
- self.GenDynamicDefaultPcds(DataType.TAB_PCDS_DYNAMIC_EX_DEFAULT, ContainerFile)
- self.GenDynamicHiiPcds(DataType.TAB_PCDS_DYNAMIC_HII, ContainerFile)
- self.GenDynamicHiiPcds(DataType.TAB_PCDS_DYNAMIC_EX_HII, ContainerFile)
- self.GenDynamicVpdPcds(DataType.TAB_PCDS_DYNAMIC_VPD, ContainerFile)
- self.GenDynamicVpdPcds(DataType.TAB_PCDS_DYNAMIC_EX_VPD, ContainerFile)
-
- #
- # Generate Components
- #
- self.GenComponents(ContainerFile)
-
- #
- # Update to database
- #
- if self.IsToDatabase:
- for Key in self.PcdToken.keys():
- SqlCommand = """update %s set Value2 = '%s' where ID = %s""" % (self.TblDsc.Table, ".".join((self.PcdToken[Key][0], self.PcdToken[Key][1])), Key)
- self.TblDsc.Exec(SqlCommand)
- #End of DscToPlatform
-
- ## Get Platform Header
- #
- # Gen Platform Header of Dsc as <Key> = <Value>
- #
- # @param ContainerFile: The Dsc file full path
- #
- def GenPlatformHeader(self, ContainerFile):
- EdkLogger.debug(2, "Generate PlatformHeader ...")
- #
- # Update all defines item in database
- #
- SqlCommand = """select ID, Value1, Arch, StartLine from %s
- where Model = %s
- and BelongsToFile = %s
- and Enabled > -1""" % (self.TblDsc.Table, MODEL_META_DATA_HEADER, self.FileID)
- RecordSet = self.TblDsc.Exec(SqlCommand)
- for Record in RecordSet:
- ValueList = GetSplitValueList(Record[1], TAB_EQUAL_SPLIT)
- if len(ValueList) != 2:
- RaiseParserError(Record[1], 'Defines', ContainerFile, '<Key> = <Value>', Record[3])
- ID, Value1, Value2, Arch = Record[0], ValueList[0], ValueList[1], Record[2]
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
- where ID = %s""" % (self.TblDsc.Table, ConvertToSqlString2(Value1), ConvertToSqlString2(Value2), ID)
- self.TblDsc.Exec(SqlCommand)
-
- #
- # Get detailed information
- #
- for Arch in DataType.ARCH_LIST:
- PlatformHeader = PlatformHeaderClass()
-
- PlatformHeader.Name = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_PLATFORM_NAME, Arch, self.FileID)[0]
- PlatformHeader.Guid = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_PLATFORM_GUID, Arch, self.FileID)[0]
- PlatformHeader.Version = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_PLATFORM_VERSION, Arch, self.FileID)[0]
- PlatformHeader.FileName = self.Identification.FileName
- PlatformHeader.FullPath = self.Identification.FileFullPath
- PlatformHeader.DscSpecification = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_DSC_SPECIFICATION, Arch, self.FileID)[0]
-
- PlatformHeader.SkuIdName = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_SKUID_IDENTIFIER, Arch, self.FileID)
- PlatformHeader.SupArchList = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_SUPPORTED_ARCHITECTURES, Arch, self.FileID)
- PlatformHeader.BuildTargets = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_BUILD_TARGETS, Arch, self.FileID)
- PlatformHeader.OutputDirectory = NormPath(QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_OUTPUT_DIRECTORY, Arch, self.FileID)[0])
- PlatformHeader.BuildNumber = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_BUILD_NUMBER, Arch, self.FileID)[0]
- PlatformHeader.MakefileName = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_MAKEFILE_NAME, Arch, self.FileID)[0]
-
- PlatformHeader.BsBaseAddress = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_BS_BASE_ADDRESS, Arch, self.FileID)[0]
- PlatformHeader.RtBaseAddress = QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_RT_BASE_ADDRESS, Arch, self.FileID)[0]
-
- self.Platform.Header[Arch] = PlatformHeader
- Fdf = PlatformFlashDefinitionFileClass()
- Fdf.FilePath = NormPath(QueryDefinesItem(self.TblDsc, TAB_DSC_DEFINES_FLASH_DEFINITION, Arch, self.FileID)[0])
- self.Platform.FlashDefinitionFile = Fdf
- Prebuild = BuildScriptClass()
- Prebuild.FilePath = NormPath(QueryDefinesItem(self.TblDsc, TAB_DSC_PREBUILD, Arch, self.FileID)[0])
- self.Platform.Prebuild = Prebuild
- Postbuild = BuildScriptClass()
- Postbuild.FilePath = NormPath(QueryDefinesItem(self.TblDsc, TAB_DSC_POSTBUILD, Arch, self.FileID)[0])
- self.Platform.Postbuild = Postbuild
-
- ## GenBuildOptions
- #
- # Gen BuildOptions of Dsc
- # [<Family>:]<ToolFlag>=Flag
- #
- # @param ContainerFile: The Dsc file full path
- #
- def GenBuildOptions(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_BUILD_OPTIONS)
- BuildOptions = {}
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, MODEL_META_DATA_BUILD_OPTION, self.FileID)
-
- #
- # Get all BuildOptions
- #
- RecordSet = QueryDscItem(self.TblDsc, MODEL_META_DATA_BUILD_OPTION, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, TAB_BUILD_OPTIONS, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- (Family, ToolChain, Flag) = GetBuildOption(NewItem, Filename, -1)
- MergeArches(BuildOptions, (Family, ToolChain, Flag), Arch)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- (Family, ToolChain, Flag) = GetBuildOption(Record[0], ContainerFile, Record[2])
- MergeArches(BuildOptions, (Family, ToolChain, Flag), Arch)
- #
- # Update to Database
- #
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s', Value3 = '%s'
- where ID = %s""" % (self.TblDsc.Table, ConvertToSqlString2(Family), ConvertToSqlString2(ToolChain), ConvertToSqlString2(Flag), Record[3])
- self.TblDsc.Exec(SqlCommand)
-
- for Key in BuildOptions.keys():
- BuildOption = BuildOptionClass(Key[0], Key[1], Key[2])
- BuildOption.SupArchList = BuildOptions[Key]
- self.Platform.BuildOptions.BuildOptionList.append(BuildOption)
-
- ## GenSkuInfos
- #
- # Gen SkuInfos of Dsc
- # <Integer>|<UiName>
- #
- # @param ContainerFile: The Dsc file full path
- #
- def GenSkuInfos(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_SKUIDS)
- #
- # SkuIds
- # <Integer>|<UiName>
- #
- self.Platform.SkuInfos.SkuInfoList['DEFAULT'] = '0'
-
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, MODEL_EFI_SKU_ID, self.FileID)
-
- #
- # Get all SkuInfos
- #
- RecordSet = QueryDscItem(self.TblDsc, MODEL_EFI_SKU_ID, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, TAB_SKUIDS, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- List = GetSplitValueList(NewItem)
- if len(List) != 2:
- RaiseParserError(NewItem, TAB_SKUIDS, Filename, '<Integer>|<UiName>')
- else:
- self.Platform.SkuInfos.SkuInfoList[List[1]] = List[0]
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- List = GetSplitValueList(Record[0])
- if len(List) != 2:
- RaiseParserError(Record[0], TAB_SKUIDS, ContainerFile, '<Integer>|<UiName>')
- else:
- self.Platform.SkuInfos.SkuInfoList[List[1]] = List[0]
- #
- # Update to Database
- #
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
- where ID = %s""" % (self.TblDsc.Table, ConvertToSqlString2(List[0]), ConvertToSqlString2(List[1]), Record[3])
- self.TblDsc.Exec(SqlCommand)
-
- ## GenLibraries
- #
- # Gen Libraries of Dsc
- # <PathAndFilename>
- #
- # @param ContainerFile: The Dsc file full path
- #
- def GenLibraries(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARIES)
- Libraries = {}
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, MODEL_EFI_LIBRARY_INSTANCE, self.FileID)
-
- #
- # Get all Libraries
- #
- RecordSet = QueryDscItem(self.TblDsc, MODEL_EFI_LIBRARY_INSTANCE, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, TAB_LIBRARIES, '', IncludeFile[2])
- if os.path.exists(Filename):
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- MergeArches(Libraries, NewItem, Arch)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- MergeArches(Libraries, Record[0], Arch)
-
- for Key in Libraries.keys():
- Library = PlatformLibraryClass()
- Library.FilePath = NormPath(Key)
- Library.SupArchList = Libraries[Key]
- self.Platform.Libraries.LibraryList.append(Library)
-
- ## GenLibraryClasses
- #
- # Get LibraryClasses of Dsc
- # <LibraryClassKeyWord>|<LibraryInstance>
- #
- # @param ContainerFile: The Dsc file full path
- #
- def GenLibraryClasses(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARY_CLASSES)
- LibraryClasses = {}
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, MODEL_EFI_LIBRARY_CLASS, self.FileID)
-
- #
- # Get all LibraryClasses
- #
- RecordSet = QueryDscItem(self.TblDsc, MODEL_EFI_LIBRARY_CLASS, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, TAB_LIBRARY_CLASSES, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- MergeArches(LibraryClasses, GetLibraryClass([NewItem, IncludeFile[4]], Filename, self.WorkspaceDir, -1), Arch)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- (LibClassName, LibClassIns, SupModelList) = GetLibraryClass([Record[0], Record[4]], ContainerFile, self.WorkspaceDir, Record[2])
- MergeArches(LibraryClasses, (LibClassName, LibClassIns, SupModelList), Arch)
- #
- # Update to Database
- #
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s', Value3 = '%s'
- where ID = %s""" % (self.TblDsc.Table, ConvertToSqlString2(LibClassName), ConvertToSqlString2(LibClassIns), ConvertToSqlString2(SupModelList), Record[3])
- self.TblDsc.Exec(SqlCommand)
-
- for Key in LibraryClasses.keys():
- Library = PlatformLibraryClass()
- Library.Name = Key[0]
- Library.FilePath = NormPath(Key[1])
- Library.SupModuleList = GetSplitValueList(Key[2])
- Library.SupArchList = LibraryClasses[Key]
- self.Platform.LibraryClasses.LibraryList.append(Library)
-
- ## Gen Pcds
- #
- # Gen Pcd of Dsc as <PcdTokenSpaceGuidCName>.<TokenCName>|<Value>[|<Type>|<MaximumDatumSize>]
- #
- # @param Type: The type of Pcd
- # @param ContainerFile: The file which describes the pcd, used for error report
- #
- def GenPcds(self, Type='', ContainerFile=''):
- Pcds = {}
- if Type == DataType.TAB_PCDS_PATCHABLE_IN_MODULE:
- Model = MODEL_PCD_PATCHABLE_IN_MODULE
- elif Type == DataType.TAB_PCDS_FIXED_AT_BUILD:
- Model = MODEL_PCD_FIXED_AT_BUILD
- else:
- pass
- EdkLogger.debug(2, "Generate %s ..." % Type)
-
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, Model, self.FileID)
-
- #
- # Get all Pcds
- #
- RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, Type, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- (TokenName, TokenGuidCName, Value, DatumType, MaxDatumSize, Type) = GetPcd(NewItem, Type, Filename, -1)
- MergeArches(Pcds, (TokenName, TokenGuidCName, Value, DatumType, MaxDatumSize, Type), Arch)
- self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- (TokenName, TokenGuidCName, Value, DatumType, MaxDatumSize, Type) = GetPcd(Record[0], Type, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenName, TokenGuidCName, Value, DatumType, MaxDatumSize, Type), Arch)
- self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
-
- for Key in Pcds:
- Pcd = PcdClass(Key[0], '', Key[1], Key[3], Key[4], Key[2], Key[5], [], {}, [])
- Pcd.SupArchList = Pcds[Key]
- self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
-
- ## Gen FeatureFlagPcds
- #
- # Gen FeatureFlagPcds of Dsc file as <PcdTokenSpaceGuidCName>.<TokenCName>|TRUE/FALSE
- #
- # @param Type: The type of Pcd
- # @param ContainerFile: The file which describes the pcd, used for error report
- #
- def GenFeatureFlagPcds(self, Type='', ContainerFile=''):
- Pcds = {}
- if Type == DataType.TAB_PCDS_FEATURE_FLAG:
- Model = MODEL_PCD_FEATURE_FLAG
- else:
- pass
- EdkLogger.debug(2, "Generate %s ..." % Type)
-
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, Model, self.FileID)
-
- #
- # Get all FeatureFlagPcds
- #
- RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, Type, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- (TokenName, TokenGuidCName, Value, Type) = GetFeatureFlagPcd(NewItem, Type, Filename, -1)
- MergeArches(Pcds, (TokenName, TokenGuidCName, Value, Type), Arch)
- self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- (TokenName, TokenGuidCName, Value, Type) = GetFeatureFlagPcd(Record[0], Type, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenName, TokenGuidCName, Value, Type), Arch)
- self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
-
- for Key in Pcds:
- Pcd = PcdClass(Key[0], '', Key[1], '', '', Key[2], Key[3], [], {}, [])
- Pcd.SupArchList = Pcds[Key]
- self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
-
- ## Gen DynamicDefaultPcds
- #
- # Gen DynamicDefaultPcds of Dsc as <PcdTokenSpaceGuidCName>.<TokenCName>|<Value>[|<DatumTyp>[|<MaxDatumSize>]]
- #
- # @param Type: The type of Pcd
- # @param ContainerFile: The file which describes the pcd, used for error report
- #
- def GenDynamicDefaultPcds(self, Type='', ContainerFile=''):
- Pcds = {}
- SkuInfoList = {}
- if Type == DataType.TAB_PCDS_DYNAMIC_DEFAULT:
- Model = MODEL_PCD_DYNAMIC_DEFAULT
- elif Type == DataType.TAB_PCDS_DYNAMIC_EX_DEFAULT:
- Model = MODEL_PCD_DYNAMIC_EX_DEFAULT
- else:
- pass
- EdkLogger.debug(2, "Generate %s ..." % Type)
-
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, Model, self.FileID)
-
- #
- # Get all DynamicDefaultPcds
- #
- RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, Type, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- (K1, K2, K3, K4, K5, K6) = GetDynamicDefaultPcd(NewItem, Type, Filename, -1)
- MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, IncludeFile[4]), Arch)
- self.PcdToken[Record[3]] = (K2, K1)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- (K1, K2, K3, K4, K5, K6) = GetDynamicDefaultPcd(Record[0], Type, ContainerFile, Record[2])
- MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, Record[4]), Arch)
- self.PcdToken[Record[3]] = (K2, K1)
-
- for Key in Pcds:
- (Status, SkuInfoList) = self.GenSkuInfoList(Key[6], self.Platform.SkuInfos.SkuInfoList, '', '', '', '', '', Key[2])
- if Status == False:
- ErrorMsg = "The SKUID '%s' used in section '%s' is not defined in section [SkuIds]" % (SkuInfoList, Type)
- EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg, ContainerFile, RaiseError=EdkLogger.IsRaiseError)
- Pcd = PcdClass(Key[0], '', Key[1], Key[3], Key[4], Key[2], Key[5], [], SkuInfoList, [])
- Pcd.SupArchList = Pcds[Key]
- self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
-
- ## Gen DynamicHiiPcds
- #
- # Gen DynamicHiiPcds of Dsc as <PcdTokenSpaceGuidCName>.<TokenCName>|<String>|<VariableGuidCName>|<VariableOffset>[|<DefaultValue>[|<MaximumDatumSize>]]
- #
- # @param Type: The type of Pcd
- # @param ContainerFile: The file which describes the pcd, used for error report
- #
- def GenDynamicHiiPcds(self, Type='', ContainerFile=''):
- Pcds = {}
- SkuInfoList = {}
- if Type == DataType.TAB_PCDS_DYNAMIC_HII:
- Model = MODEL_PCD_DYNAMIC_HII
- elif Type == DataType.TAB_PCDS_DYNAMIC_EX_HII:
- Model = MODEL_PCD_DYNAMIC_EX_HII
- else:
- pass
- EdkLogger.debug(2, "Generate %s ..." % Type)
-
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, Model, self.FileID)
-
- #
- # Get all DynamicHiiPcds
- #
- RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, Type, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- (K1, K2, K3, K4, K5, K6, K7, K8) = GetDynamicHiiPcd(NewItem, Type, Filename, -1)
- MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, K7, K8, IncludeFile[4]), Arch)
- self.PcdToken[Record[3]] = (K2, K1)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- (K1, K2, K3, K4, K5, K6, K7, K8) = GetDynamicHiiPcd(Record[0], Type, ContainerFile, Record[2])
- MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, K7, K8, Record[4]), Arch)
- self.PcdToken[Record[3]] = (K2, K1)
-
- for Key in Pcds:
- (Status, SkuInfoList) = self.GenSkuInfoList(Key[8], self.Platform.SkuInfos.SkuInfoList, Key[2], Key[3], Key[4], Key[5], '', '')
- if Status == False:
- ErrorMsg = "The SKUID '%s' used in section '%s' is not defined in section [SkuIds]" % (SkuInfoList, Type)
- EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg, ContainerFile, RaiseError=EdkLogger.IsRaiseError)
- Pcd = PcdClass(Key[0], '', Key[1], '', Key[6], Key[5], Key[7], [], SkuInfoList, [])
- Pcd.SupArchList = Pcds[Key]
- self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
-
- ## Gen DynamicVpdPcds
- #
- # Gen DynamicVpdPcds of Dsc as <PcdTokenSpaceGuidCName>.<TokenCName>|<VpdOffset>[|<MaximumDatumSize>]
- #
- # @param Type: The type of Pcd
- # @param ContainerFile: The file which describes the pcd, used for error report
- #
- def GenDynamicVpdPcds(self, Type='', ContainerFile=''):
- Pcds = {}
- SkuInfoList = {}
- if Type == DataType.TAB_PCDS_DYNAMIC_VPD:
- Model = MODEL_PCD_DYNAMIC_VPD
- elif Type == DataType.TAB_PCDS_DYNAMIC_EX_VPD:
- Model = MODEL_PCD_DYNAMIC_EX_VPD
- else:
- pass
- EdkLogger.debug(2, "Generate %s ..." % Type)
-
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, Model, self.FileID)
-
- #
- # Get all DynamicVpdPcds
- #
- RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, Type, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- (K1, K2, K3, K4, K5) = GetDynamicVpdPcd(NewItem, Type, Filename, -1)
- MergeArches(Pcds, (K1, K2, K3, K4, K5, IncludeFile[4]), Arch)
- self.PcdToken[Record[3]] = (K2, K1)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- (K1, K2, K3, K4, K5) = GetDynamicVpdPcd(Record[0], Type, ContainerFile, Record[2])
- MergeArches(Pcds, (K1, K2, K3, K4, K5, Record[4]), Arch)
- self.PcdToken[Record[3]] = (K2, K1)
-
- for Key in Pcds:
- (Status, SkuInfoList) = self.GenSkuInfoList(Key[5], self.Platform.SkuInfos.SkuInfoList, '', '', '', '', Key[2], '')
- if Status == False:
- ErrorMsg = "The SKUID '%s' used in section '%s' is not defined in section [SkuIds]" % (SkuInfoList, Type)
- EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg, ContainerFile, RaiseError=EdkLogger.IsRaiseError)
- Pcd = PcdClass(Key[0], '', Key[1], '', Key[3], '', Key[4], [], SkuInfoList, [])
- Pcd.SupArchList = Pcds[Key]
- self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
-
-
- ## Get Component
- #
- # Get Component section defined in Dsc file
- #
- # @param ContainerFile: The file which describes the Components, used for error report
- #
- # @retval PlatformModuleClass() A instance for PlatformModuleClass
- #
- def GenComponents(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_COMPONENTS)
- Components = sdict()
- #
- # Get all include files
- #
- IncludeFiles = QueryDscItem(self.TblDsc, MODEL_META_DATA_INCLUDE, MODEL_META_DATA_COMPONENT, self.FileID)
-
- #
- # Get all Components
- #
- RecordSet = QueryDscItem(self.TblDsc, MODEL_META_DATA_COMPONENT, -1, self.FileID)
-
- #
- # Go through each arch
- #
- for Arch in DataType.ARCH_LIST:
- for IncludeFile in IncludeFiles:
- if IncludeFile[1] == Arch or IncludeFile[1] == TAB_ARCH_COMMON.upper():
- Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0], ContainerFile, TAB_COMPONENTS, '', IncludeFile[2])
- for NewItem in open(Filename, 'r').readlines():
- if CleanString(NewItem) == '':
- continue
- NewItems = []
- GetComponents(open(Filename, 'r').read(), TAB_COMPONENTS, NewItems, TAB_COMMENT_SPLIT)
- for NewComponent in NewItems:
- MergeArches(Components, self.GenComponent(NewComponent, Filename), Arch)
-
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
- Lib, Bo, Pcd = [], [], []
-
- SubLibSet = QueryDscItem(self.TblDsc, MODEL_EFI_LIBRARY_CLASS, Record[3], self.FileID)
- for SubLib in SubLibSet:
- Lib.append(TAB_VALUE_SPLIT.join([SubLib[0], SubLib[4]]))
-
- SubBoSet = QueryDscItem(self.TblDsc, MODEL_META_DATA_BUILD_OPTION, Record[3], self.FileID)
- for SubBo in SubBoSet:
- Bo.append(SubBo[0])
-
- SubPcdSet1 = QueryDscItem(self.TblDsc, MODEL_PCD_FIXED_AT_BUILD, Record[3], self.FileID)
- SubPcdSet2 = QueryDscItem(self.TblDsc, MODEL_PCD_PATCHABLE_IN_MODULE, Record[3], self.FileID)
- SubPcdSet3 = QueryDscItem(self.TblDsc, MODEL_PCD_FEATURE_FLAG, Record[3], self.FileID)
- SubPcdSet4 = QueryDscItem(self.TblDsc, MODEL_PCD_DYNAMIC_EX_DEFAULT, Record[3], self.FileID)
- SubPcdSet5 = QueryDscItem(self.TblDsc, MODEL_PCD_DYNAMIC_DEFAULT, Record[3], self.FileID)
- for SubPcd in SubPcdSet1:
- Pcd.append([DataType.TAB_PCDS_FIXED_AT_BUILD, SubPcd[0], SubPcd[3]])
- for SubPcd in SubPcdSet2:
- Pcd.append([DataType.TAB_PCDS_PATCHABLE_IN_MODULE, SubPcd[0], SubPcd[3]])
- for SubPcd in SubPcdSet3:
- Pcd.append([DataType.TAB_PCDS_FEATURE_FLAG, SubPcd[0], SubPcd[3]])
- for SubPcd in SubPcdSet4:
- Pcd.append([DataType.TAB_PCDS_DYNAMIC_EX, SubPcd[0], SubPcd[3]])
- for SubPcd in SubPcdSet5:
- Pcd.append([DataType.TAB_PCDS_DYNAMIC, SubPcd[0], SubPcd[3]])
- Item = [Record[0], Lib, Bo, Pcd]
- MergeArches(Components, self.GenComponent(Item, ContainerFile), Arch)
-
- for Key in Components.keys():
- Key.SupArchList = Components[Key]
- self.Platform.Modules.ModuleList.append(Key)
-
- ## Get Component
- #
- # Get Component section defined in Dsc file
- #
- # @param Item: Contents includes a component block
- # @param ContainerFile: The file which describes the library class, used for error report
- #
- # @retval PlatformModuleClass() A instance for PlatformModuleClass
- #
- def GenComponent(self, Item, ContainerFile, LineNo= -1):
- (InfFilename, ExecFilename) = GetExec(Item[0])
- LibraryClasses = Item[1]
- BuildOptions = Item[2]
- Pcds = Item[3]
- Component = PlatformModuleClass()
- Component.FilePath = NormPath(InfFilename)
- Component.ExecFilePath = NormPath(ExecFilename)
- CheckFileType(Component.FilePath, '.Inf', ContainerFile, 'component name', Item[0], LineNo)
- CheckFileExist(self.WorkspaceDir, Component.FilePath, ContainerFile, 'component', Item[0], LineNo)
- for Lib in LibraryClasses:
- List = GetSplitValueList(Lib)
- if len(List) != 2:
- RaiseParserError(Lib, 'LibraryClasses', ContainerFile, '<ClassName>|<InfFilename>')
- LibName = List[0]
- LibFile = NormPath(List[1])
- if LibName == "" or LibName == "NULL":
- LibName = "NULL%d" % self._NullClassIndex
- self._NullClassIndex += 1
- CheckFileType(List[1], '.Inf', ContainerFile, 'library instance of component ', Lib, LineNo)
- CheckFileExist(self.WorkspaceDir, LibFile, ContainerFile, 'library instance of component', Lib, LineNo)
- Component.LibraryClasses.LibraryList.append(PlatformLibraryClass(LibName, LibFile))
- for BuildOption in BuildOptions:
- Key = GetBuildOption(BuildOption, ContainerFile)
- Component.ModuleSaBuildOption.BuildOptionList.append(BuildOptionClass(Key[0], Key[1], Key[2]))
- for Pcd in Pcds:
- Type = Pcd[0]
- List = GetSplitValueList(Pcd[1])
- PcdId = Pcd[2]
-
- TokenInfo = None
- #
- # For FeatureFlag
- #
- if Type == DataType.TAB_PCDS_FEATURE_FLAG:
- if len(List) != 2:
- RaiseParserError(Pcd[1], 'Components', ContainerFile, '<PcdTokenSpaceGuidCName>.<PcdTokenName>|TRUE/FALSE')
-
- CheckPcdTokenInfo(List[0], 'Components', ContainerFile)
- TokenInfo = GetSplitValueList(List[0], DataType.TAB_SPLIT)
- Component.PcdBuildDefinitions.append(PcdClass(TokenInfo[1], '', TokenInfo[0], '', '', List[1], Type, [], {}, []))
- #
- # For FixedAtBuild or PatchableInModule
- #
- if Type == DataType.TAB_PCDS_FIXED_AT_BUILD or Type == DataType.TAB_PCDS_PATCHABLE_IN_MODULE:
- List.append('')
- if len(List) != 3 and len(List) != 4:
- RaiseParserError(Pcd[1], 'Components', ContainerFile, '<PcdTokenSpaceGuidCName>.<PcdTokenName>|<Value>[|<MaxDatumSize>]')
-
- CheckPcdTokenInfo(List[0], 'Components', ContainerFile)
- TokenInfo = GetSplitValueList(List[0], DataType.TAB_SPLIT)
- Component.PcdBuildDefinitions.append(PcdClass(TokenInfo[1], '', TokenInfo[0], '', List[2], List[1], Type, [], {}, []))
-
- #
- # For Dynamic or DynamicEx
- #
- if Type == DataType.TAB_PCDS_DYNAMIC or Type == DataType.TAB_PCDS_DYNAMIC_EX:
- if len(List) != 1:
- RaiseParserError(Pcd[1], 'Components', ContainerFile, '<PcdTokenSpaceGuidCName>.<PcdTokenName>')
-
- CheckPcdTokenInfo(List[0], 'Components', ContainerFile)
- TokenInfo = GetSplitValueList(List[0], DataType.TAB_SPLIT)
- Component.PcdBuildDefinitions.append(PcdClass(TokenInfo[1], '', TokenInfo[0], '', '', '', Type, [], {}, []))
-
- #
- # Add to PcdToken
- #
- self.PcdToken[PcdId] = (TokenInfo[0], TokenInfo[1])
-
- return Component
- #End of GenComponent
-
- ## Gen SkuInfoList
- #
- # Gen SkuInfoList section defined in Dsc file
- #
- # @param SkuNameList: Input value for SkuNameList
- # @param SkuInfo: Input value for SkuInfo
- # @param VariableName: Input value for VariableName
- # @param VariableGuid: Input value for VariableGuid
- # @param VariableOffset: Input value for VariableOffset
- # @param HiiDefaultValue: Input value for HiiDefaultValue
- # @param VpdOffset: Input value for VpdOffset
- # @param DefaultValue: Input value for DefaultValue
- #
- # @retval (False, SkuName) Not found in section SkuId Dsc file
- # @retval (True, SkuInfoList) Found in section SkuId of Dsc file
- #
- def GenSkuInfoList(self, SkuNameList, SkuInfo, VariableName='', VariableGuid='', VariableOffset='', HiiDefaultValue='', VpdOffset='', DefaultValue=''):
- SkuNameList = GetSplitValueList(SkuNameList)
- if SkuNameList is None or SkuNameList == [] or SkuNameList == ['']:
- SkuNameList = ['DEFAULT']
- SkuInfoList = {}
- for Item in SkuNameList:
- if Item not in SkuInfo:
- return False, Item
- Sku = SkuInfoClass(Item, SkuInfo[Item], VariableName, VariableGuid, VariableOffset, HiiDefaultValue, VpdOffset, DefaultValue)
- SkuInfoList[Item] = Sku
-
- return True, SkuInfoList
-
- ## Parse Include statement
- #
- # Get include file path
- #
- # 1. Insert a record into TblFile ???
- # 2. Insert a record into TblDsc
- # Value1: IncludeFilePath
- #
- # @param LineValue: The line of incude statement
- def ParseInclude(self, LineValue, StartLine, Table, FileID, Filename, SectionName, Model, Arch):
- EdkLogger.debug(EdkLogger.DEBUG_2, "!include statement '%s' found in section %s" % (LineValue, SectionName))
- SectionModel = Section[SectionName.upper()]
- IncludeFile = CleanString(LineValue[LineValue.upper().find(DataType.TAB_INCLUDE.upper() + ' ') + len(DataType.TAB_INCLUDE + ' ') : ])
- Table.Insert(Model, IncludeFile, '', '', Arch, SectionModel, FileID, StartLine, -1, StartLine, -1, 0)
-
- ## Parse DEFINE statement
- #
- # Get DEFINE macros
- #
- # 1. Insert a record into TblDsc
- # Value1: Macro Name
- # Value2: Macro Value
- #
- def ParseDefine(self, LineValue, StartLine, Table, FileID, Filename, SectionName, Model, Arch):
- EdkLogger.debug(EdkLogger.DEBUG_2, "DEFINE statement '%s' found in section %s" % (LineValue, SectionName))
- SectionModel = Section[SectionName.upper()]
- Define = GetSplitValueList(CleanString(LineValue[LineValue.upper().find(DataType.TAB_DEFINE.upper() + ' ') + len(DataType.TAB_DEFINE + ' ') : ]), TAB_EQUAL_SPLIT, 1)
- Table.Insert(Model, Define[0], Define[1], '', Arch, SectionModel, FileID, StartLine, -1, StartLine, -1, 0)
-
- ## Parse Defines section
- #
- # Get one item in defines section
- #
- # Value1: Item Name
- # Value2: Item Value
- #
- def ParseDefinesSection(self, LineValue, StartLine, Table, FileID, Filename, SectionName, Model, Arch):
- EdkLogger.debug(EdkLogger.DEBUG_2, "Parse '%s' found in section %s" % (LineValue, SectionName))
- Defines = GetSplitValueList(LineValue, TAB_EQUAL_SPLIT, 1)
- if len(Defines) != 2:
- RaiseParserError(LineValue, SectionName, Filename, '', StartLine)
- self.TblDsc.Insert(Model, Defines[0], Defines[1], '', Arch, -1, FileID, StartLine, -1, StartLine, -1, 0)
-
- ## Insert conditional statements
- #
- # Pop an item from IfDefList
- # Insert conditional statements to database
- #
- # @param Filename: Path of parsing file
- # @param IfDefList: A list stored current conditional statements
- # @param EndLine: The end line no
- # @param ArchList: Support arch list
- #
- def InsertConditionalStatement(self, Filename, FileID, BelongsToItem, IfDefList, EndLine, ArchList):
- (Value1, Value2, Value3, Model, StartColumn, EndColumn, Enabled) = ('', '', '', -1, -1, -1, 0)
- if IfDefList == []:
- ErrorMsg = 'Not suited conditional statement in file %s' % Filename
- EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg, Filename, RaiseError=EdkLogger.IsRaiseError)
- else:
- #
- # Get New Dsc item ID
- #
- DscID = self.TblDsc.GetCount() + 1
-
- #
- # Pop the conditional statements which is closed
- #
- PreviousIf = IfDefList.pop()
- EdkLogger.debug(EdkLogger.DEBUG_5, 'Previous IfDef: ' + str(PreviousIf))
-
- #
- # !ifdef and !ifndef
- #
- if PreviousIf[2] in (MODEL_META_DATA_CONDITIONAL_STATEMENT_IFDEF, MODEL_META_DATA_CONDITIONAL_STATEMENT_IFNDEF):
- Value1 = PreviousIf[0]
- Model = PreviousIf[2]
- self.TblDsc.Insert(Model, Value1, Value2, Value3, ArchList, BelongsToItem, self.FileID, PreviousIf[1], StartColumn, EndLine, EndColumn, Enabled)
- #
- # !if and !elseif
- #
- elif PreviousIf[2] in (MODEL_META_DATA_CONDITIONAL_STATEMENT_IF, Model):
- List = PreviousIf[0].split(' ')
- Value1, Value2, Value3 = '', '==', '0'
- if len(List) == 3:
- Value1 = List[0]
- Value2 = List[1]
- Value3 = List[2]
- Value3 = SplitString(Value3)
- if len(List) == 1:
- Value1 = List[0]
- Model = PreviousIf[2]
- self.TblDsc.Insert(Model, Value1, Value2, Value3, ArchList, BelongsToItem, self.FileID, PreviousIf[1], StartColumn, EndLine, EndColumn, Enabled)
- #
- # !else
- #
- elif PreviousIf[2] in (MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE, Model):
- Value1 = PreviousIf[0].strip()
- Model = PreviousIf[2]
- self.TblDsc.Insert(Model, Value1, Value2, Value3, ArchList, BelongsToItem, self.FileID, PreviousIf[1], StartColumn, EndLine, EndColumn, Enabled)
-
- ## Load Dsc file
- #
- # Load the file if it exists
- #
- # @param Filename: Input value for filename of Dsc file
- #
- def LoadDscFile(self, Filename):
- #
- # Insert a record for file
- #
- Filename = NormPath(Filename)
- self.Identification.FileFullPath = Filename
- (self.Identification.FileRelativePath, self.Identification.FileName) = os.path.split(Filename)
- self.FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_DSC)
-
- #
- # Init DscTable
- #
- #self.TblDsc.Table = "Dsc%s" % FileID
- #self.TblDsc.Create()
-
- #
- # Init common datas
- #
- IfDefList, SectionItemList, CurrentSection, ArchList, ThirdList, IncludeFiles = \
- [], [], TAB_UNKNOWN, [], [], []
- LineNo = 0
-
- #
- # Parse file content
- #
- IsFindBlockComment = False
- ReservedLine = ''
- for Line in open(Filename, 'r'):
- LineNo = LineNo + 1
- #
- # Remove comment block
- #
- if Line.find(TAB_COMMENT_EDK_START) > -1:
- ReservedLine = GetSplitList(Line, TAB_COMMENT_EDK_START, 1)[0]
- IsFindBlockComment = True
- if Line.find(TAB_COMMENT_EDK_END) > -1:
- Line = ReservedLine + GetSplitList(Line, TAB_COMMENT_EDK_END, 1)[1]
- ReservedLine = ''
- IsFindBlockComment = False
- if IsFindBlockComment:
- continue
-
- #
- # Remove comments at tail and remove spaces again
- #
- Line = CleanString(Line)
- if Line == '':
- continue
-
- #
- # Find a new section tab
- # First insert previous section items
- # And then parse the content of the new section
- #
- if Line.startswith(TAB_SECTION_START) and Line.endswith(TAB_SECTION_END):
- #
- # Insert items data of previous section
- #
- self.InsertSectionItemsIntoDatabase(self.FileID, Filename, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList)
- #
- # Parse the new section
- #
- SectionItemList = []
- ArchList = []
- ThirdList = []
-
- CurrentSection = ''
- LineList = GetSplitValueList(Line[len(TAB_SECTION_START):len(Line) - len(TAB_SECTION_END)], TAB_COMMA_SPLIT)
- for Item in LineList:
- ItemList = GetSplitValueList(Item, TAB_SPLIT)
- if CurrentSection == '':
- CurrentSection = ItemList[0]
- else:
- if CurrentSection != ItemList[0]:
- EdkLogger.error("Parser", PARSER_ERROR, "Different section names '%s' and '%s' are found in one section definition, this is not allowed." % (CurrentSection, ItemList[0]), File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
- if CurrentSection.upper() not in self.KeyList:
- RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
- CurrentSection = TAB_UNKNOWN
- continue
- ItemList.append('')
- ItemList.append('')
- if len(ItemList) > 5:
- RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
- else:
- if ItemList[1] != '' and ItemList[1].upper() not in ARCH_LIST_FULL:
- EdkLogger.error("Parser", PARSER_ERROR, "Invalid Arch definition '%s' found" % ItemList[1], File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
- ArchList.append(ItemList[1].upper())
- ThirdList.append(ItemList[2])
-
- continue
-
- #
- # Not in any defined section
- #
- if CurrentSection == TAB_UNKNOWN:
- ErrorMsg = "%s is not in any defined section" % Line
- EdkLogger.error("Parser", PARSER_ERROR, ErrorMsg, File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
-
- #
- # Add a section item
- #
- SectionItemList.append([Line, LineNo])
- # End of parse
- #End of For
-
- #
- # Insert items data of last section
- #
- self.InsertSectionItemsIntoDatabase(self.FileID, Filename, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList)
-
- #
- # Parse conditional statements
- #
- self.ParseConditionalStatement()
-
- #
- # Replace all DEFINE macros with its actual values
- #
- #ParseDefineMacro2(self.TblDsc, self.RecordSet, GlobalData.gGlobalDefines)
- ParseDefineMacro(self.TblDsc, GlobalData.gGlobalDefines)
-
-
- ## ParseConditionalStatement
- #
- # Search all conditional statement and disable no match records
- #
- def ParseConditionalStatement(self):
- #
- # Disabled all !if/!elif/!ifdef statements without DEFINE
- #
- SqlCommand = """select A.StartLine, A.EndLine from %s as A
- where A.Model in (%s, %s, %s)
- and A.Enabled = 0
- and A.BelongsToFile = %s
- and A.Value1 not in (select B.Value1 from %s as B
- where B.Model = %s
- and B.Enabled = 0
- and A.StartLine > B.StartLine
- and A.Arch = B.Arch
- and A.BelongsToItem = B.BelongsToItem
- and A.BelongsToFile = B.BelongsToFile) """ % \
- (self.TblDsc.Table, \
- MODEL_META_DATA_CONDITIONAL_STATEMENT_IF, MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE, MODEL_META_DATA_CONDITIONAL_STATEMENT_IFDEF, \
- self.FileID, \
- self.TblDsc.Table, \
- MODEL_META_DATA_DEFINE)
- RecordSet = self.TblDsc.Exec(SqlCommand)
- for Record in RecordSet:
- SqlCommand = """Update %s set Enabled = -1 where StartLine >= %s and EndLine <= %s""" % (self.TblDsc.Table, Record[0], Record[1])
- self.TblDsc.Exec(SqlCommand)
-
- #
- # Disabled !ifndef with DEFINE
- #
- SqlCommand = """select A.StartLine, A.EndLine from %s as A
- where A.Model = %s
- and A.Enabled = 0
- and A.BelongsToFile = %s
- and A.Value1 in (select B.Value1 from %s as B
- where B.Model = %s
- and B.Enabled = 0
- and A.StartLine > B.StartLine
- and A.Arch = B.Arch
- and A.BelongsToItem = B.BelongsToItem
- and A.BelongsToFile = B.BelongsToFile)""" % \
- (self.TblDsc.Table, \
- MODEL_META_DATA_CONDITIONAL_STATEMENT_IFNDEF, \
- self.FileID, \
- self.TblDsc.Table, \
- MODEL_META_DATA_DEFINE)
- RecordSet = self.TblDsc.Exec(SqlCommand)
- for Record in RecordSet:
- SqlCommand = """Update %s set Enabled = -1 where StartLine >= %s and EndLine <= %s""" % (self.TblDsc.Table, Record[0], Record[1])
- EdkLogger.debug(4, "SqlCommand: %s" % SqlCommand)
- self.Cur.execute(SqlCommand)
-
- #
- # Disabled !if, !elif and !else with un-match value
- #
- SqlCommand = """select A.Model, A.Value1, A.Value2, A.Value3, A.StartLine, A.EndLine, B.Value2 from %s as A join %s as B
- where A.Model in (%s, %s)
- and A.Enabled = 0
- and A.BelongsToFile = %s
- and B.Enabled = 0
- and B.Model = %s
- and A.Value1 = B.Value1
- and A.StartLine > B.StartLine
- and A.BelongsToItem = B.BelongsToItem
- and A.BelongsToFile = B.BelongsToFile""" % \
- (self.TblDsc.Table, self.TblDsc.Table, \
- MODEL_META_DATA_CONDITIONAL_STATEMENT_IF, MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE, \
- self.FileID, MODEL_META_DATA_DEFINE)
- RecordSet = self.TblDsc.Exec(SqlCommand)
- DisabledList = []
- for Record in RecordSet:
- if Record[0] == MODEL_META_DATA_CONDITIONAL_STATEMENT_IF:
- if not self.Compare(Record[6], Record[2], Record[3]):
- SqlCommand = """Update %s set Enabled = -1 where StartLine >= %s and EndLine <= %s""" % (self.TblDsc.Table, Record[4], Record[5])
- self.TblDsc.Exec(SqlCommand)
- else:
- DisabledList.append(Record[1])
- continue
- if Record[0] == MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE and Record[1] in DisabledList:
- SqlCommand = """Update %s set Enabled = -1 where StartLine >= %s and EndLine <= %s""" % (self.TblDsc.Table, Record[4], Record[5])
- self.TblDsc.Exec(SqlCommand)
-
- ## Compare
- #
- # Compare two values
- # @param Value1:
- # @param CompareType:
- # @param Value2:
- #
- def Compare(self, Value1, CompareType, Value2):
- Command = """Value1 %s Value2""" % CompareType
- return eval(Command)
-
- ## First time to insert records to database
- #
- # Insert item data of a section to database
- # @param FileID: The ID of belonging file
- # @param Filename: The name of belonging file
- # @param CurrentSection: The name of currect section
- # @param SectionItemList: A list of items of the section
- # @param ArchList: A list of arches
- # @param ThirdList: A list of third parameters, ModuleType for LibraryClass and SkuId for Dynamic Pcds
- # @param IfDefList: A list of all conditional statements
- #
- def InsertSectionItemsIntoDatabase(self, FileID, Filename, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList):
- #
- # Insert each item data of a section
- #
- for Index in range(0, len(ArchList)):
- Arch = ArchList[Index]
- Third = ThirdList[Index]
- if Arch == '':
- Arch = TAB_ARCH_COMMON.upper()
-
- Model = Section[CurrentSection.upper()]
- #Records = self.RecordSet[Model]
-
- for SectionItem in SectionItemList:
- BelongsToItem, EndLine, EndColumn = -1, -1, -1
- LineValue, StartLine, EndLine = SectionItem[0], SectionItem[1], SectionItem[1]
-
-
- EdkLogger.debug(4, "Parsing %s ..." % LineValue)
- #
- # Parse '!ifdef'
- #
- if LineValue.upper().find(TAB_IF_DEF.upper()) > -1:
- IfDefList.append((LineValue[len(TAB_IF_N_DEF):].strip(), StartLine, MODEL_META_DATA_CONDITIONAL_STATEMENT_IFDEF))
- continue
-
- #
- # Parse '!ifndef'
- #
- if LineValue.upper().find(TAB_IF_N_DEF.upper()) > -1:
- IfDefList.append((LineValue[len(TAB_IF_N_DEF):].strip(), StartLine, MODEL_META_DATA_CONDITIONAL_STATEMENT_IFNDEF))
- continue
-
- #
- # Parse '!endif'
- #
- if LineValue.upper().find(TAB_END_IF.upper()) > -1:
- self.InsertConditionalStatement(Filename, FileID, Model, IfDefList, StartLine, Arch)
- continue
- #
- # Parse '!if'
- #
- if LineValue.upper().find(TAB_IF.upper()) > -1:
- IfDefList.append((LineValue[len(TAB_IF):].strip(), StartLine, MODEL_META_DATA_CONDITIONAL_STATEMENT_IF))
- continue
-
- #
- # Parse '!elseif'
- #
- if LineValue.upper().find(TAB_ELSE_IF.upper()) > -1:
- self.InsertConditionalStatement(Filename, FileID, Model, IfDefList, StartLine - 1, Arch)
- IfDefList.append((LineValue[len(TAB_ELSE_IF):].strip(), StartLine, MODEL_META_DATA_CONDITIONAL_STATEMENT_IF))
- continue
-
- #
- # Parse '!else'
- #
- if LineValue.upper().find(TAB_ELSE.upper()) > -1:
- Key = IfDefList[-1][0].split(' ' , 1)[0].strip()
- self.InsertConditionalStatement(Filename, FileID, Model, IfDefList, StartLine, Arch)
- IfDefList.append((Key, StartLine, MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE))
- continue
-
- #
- # Parse !include statement first
- #
- if LineValue.upper().find(DataType.TAB_INCLUDE.upper() + ' ') > -1:
- self.ParseInclude(LineValue, StartLine, self.TblDsc, FileID, Filename, CurrentSection, MODEL_META_DATA_INCLUDE, Arch)
- continue
-
- #
- # And then parse DEFINE statement
- #
- if LineValue.upper().find(DataType.TAB_DEFINE.upper() + ' ') > -1:
- self.ParseDefine(LineValue, StartLine, self.TblDsc, FileID, Filename, CurrentSection, MODEL_META_DATA_DEFINE, Arch)
- continue
-
- #
- # At last parse other sections
- #
- if CurrentSection == TAB_LIBRARY_CLASSES or CurrentSection in TAB_PCD_DYNAMIC_TYPE_LIST or CurrentSection in TAB_PCD_DYNAMIC_EX_TYPE_LIST:
- ID = self.TblDsc.Insert(Model, LineValue, Third, '', Arch, -1, FileID, StartLine, -1, StartLine, -1, 0)
- #Records.append([LineValue, Arch, StartLine, ID, Third])
- continue
- elif CurrentSection != TAB_COMPONENTS:
- ID = self.TblDsc.Insert(Model, LineValue, '', '', Arch, -1, FileID, StartLine, -1, StartLine, -1, 0)
- #Records.append([LineValue, Arch, StartLine, ID, Third])
- continue
-
- #
- # Parse COMPONENT section
- #
- if CurrentSection == TAB_COMPONENTS:
- Components = []
- GetComponent(SectionItemList, Components)
- for Component in Components:
- EdkLogger.debug(4, "Parsing component %s ..." % Component)
- DscItmeID = self.TblDsc.Insert(MODEL_META_DATA_COMPONENT, Component[0], '', '', Arch, -1, FileID, StartLine, -1, StartLine, -1, 0)
- for Item in Component[1]:
- List = GetSplitValueList(Item, MaxSplit=2)
- LibName, LibIns = '', ''
- if len(List) == 2:
- LibName = List[0]
- LibIns = List[1]
- else:
- LibName = List[0]
- self.TblDsc.Insert(MODEL_EFI_LIBRARY_CLASS, LibName, LibIns, '', Arch, DscItmeID, FileID, StartLine, -1, StartLine, -1, 0)
- for Item in Component[2]:
- self.TblDsc.Insert(MODEL_META_DATA_BUILD_OPTION, Item, '', '', Arch, DscItmeID, FileID, StartLine, -1, StartLine, -1, 0)
- for Item in Component[3]:
- Model = Section[Item[0].upper()]
- self.TblDsc.Insert(Model, Item[1], '', '', Arch, DscItmeID, FileID, StartLine, -1, StartLine, -1, 0)
-
- ## Show detailed information of Dsc
- #
- # Print all members and their values of Dsc class
- #
- def ShowDsc(self):
- print TAB_SECTION_START + TAB_INF_DEFINES + TAB_SECTION_END
- printDict(self.Defines.DefinesDictionary)
-
- for Key in self.KeyList:
- for Arch in DataType.ARCH_LIST_FULL:
- Command = "printList(TAB_SECTION_START + '" + \
- Key + DataType.TAB_SPLIT + Arch + \
- "' + TAB_SECTION_END, self.Contents[arch]." + Key + ')'
- eval(Command)
-
- ## Show detailed information of Platform
- #
- # Print all members and their values of Platform class
- #
- def ShowPlatform(self):
- M = self.Platform
- for Arch in M.Header.keys():
- print '\nArch =', Arch
- print 'Filename =', M.Header[Arch].FileName
- print 'FullPath =', M.Header[Arch].FullPath
- print 'BaseName =', M.Header[Arch].Name
- print 'Guid =', M.Header[Arch].Guid
- print 'Version =', M.Header[Arch].Version
- print 'DscSpecification =', M.Header[Arch].DscSpecification
- print 'SkuId =', M.Header[Arch].SkuIdName
- print 'SupArchList =', M.Header[Arch].SupArchList
- print 'BuildTargets =', M.Header[Arch].BuildTargets
- print 'OutputDirectory =', M.Header[Arch].OutputDirectory
- print 'BuildNumber =', M.Header[Arch].BuildNumber
- print 'MakefileName =', M.Header[Arch].MakefileName
- print 'BsBaseAddress =', M.Header[Arch].BsBaseAddress
- print 'RtBaseAddress =', M.Header[Arch].RtBaseAddress
- print 'Define =', M.Header[Arch].Define
- print 'Fdf =', M.FlashDefinitionFile.FilePath
- print '\nBuildOptions =', M.BuildOptions, M.BuildOptions.IncludeFiles
- for Item in M.BuildOptions.BuildOptionList:
- print '\t', 'ToolChainFamily =', Item.ToolChainFamily, 'ToolChain =', Item.ToolChain, 'Option =', Item.Option, 'Arch =', Item.SupArchList
- print '\nSkuIds =', M.SkuInfos.SkuInfoList, M.SkuInfos.IncludeFiles
- print '\nLibraries =', M.Libraries, M.Libraries.IncludeFiles
- for Item in M.Libraries.LibraryList:
- print '\t', Item.FilePath, Item.SupArchList, Item.Define
- print '\nLibraryClasses =', M.LibraryClasses, M.LibraryClasses.IncludeFiles
- for Item in M.LibraryClasses.LibraryList:
- print '\t', Item.Name, Item.FilePath, Item.SupModuleList, Item.SupArchList, Item.Define
- print '\nPcds =', M.DynamicPcdBuildDefinitions
- for Item in M.DynamicPcdBuildDefinitions:
- print '\tCname=', Item.CName, 'TSG=', Item.TokenSpaceGuidCName, 'Value=', Item.DefaultValue, 'Token=', Item.Token, 'Type=', Item.ItemType, 'Datum=', Item.DatumType, 'Size=', Item.MaxDatumSize, 'Arch=', Item.SupArchList, Item.SkuInfoList
- for Sku in Item.SkuInfoList.values():
- print '\t\t', str(Sku)
- print '\nComponents =', M.Modules.ModuleList, M.Modules.IncludeFiles
- for Item in M.Modules.ModuleList:
- print '\t', Item.FilePath, Item.ExecFilePath, Item.SupArchList
- for Lib in Item.LibraryClasses.LibraryList:
- print '\t\tLib:', Lib.Name, Lib.FilePath
- for Bo in Item.ModuleSaBuildOption.BuildOptionList:
- print '\t\tBuildOption:', Bo.ToolChainFamily, Bo.ToolChain, Bo.Option
- for Pcd in Item.PcdBuildDefinitions:
- print '\t\tPcd:', Pcd.CName, Pcd.TokenSpaceGuidCName, Pcd.MaxDatumSize, Pcd.DefaultValue, Pcd.ItemType
-
-##
-#
-# This acts like the main() function for the script, unless it is 'import'ed into another
-# script.
-#
-if __name__ == '__main__':
- EdkLogger.Initialize()
- EdkLogger.SetLevel(EdkLogger.DEBUG_0)
-
- W = os.getenv('WORKSPACE')
- F = os.path.join(W, 'Nt32Pkg/Nt32Pkg.dsc')
-
- Db = Database.Database('Dsc.db')
- Db.InitDatabase()
-
- P = Dsc(os.path.normpath(F), True, True, W, Db)
- P.ShowPlatform()
-
- Db.Close()
diff --git a/BaseTools/Source/Python/Common/FdfClassObject.py b/BaseTools/Source/Python/Common/FdfClassObject.py
deleted file mode 100644
index 9a7d6494d331..000000000000
--- a/BaseTools/Source/Python/Common/FdfClassObject.py
+++ /dev/null
@@ -1,106 +0,0 @@
-## @file
-# This file is used to define each component of FDF file
-#
-# Copyright (c) 2008, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-##
-# Import Modules
-#
-from FdfParserLite import FdfParser
-from Table.TableFdf import TableFdf
-from CommonDataClass.DataClass import MODEL_FILE_FDF, MODEL_PCD, MODEL_META_DATA_COMPONENT
-from String import NormPath
-
-
-## Fdf
-#
-# This class defined the structure used in Fdf object
-#
-# @param Filename: Input value for Ffilename of Fdf file, default is None
-# @param WorkspaceDir: Input value for current workspace directory, default is None
-#
-class Fdf(object):
- def __init__(self, Filename = None, IsToDatabase = False, WorkspaceDir = None, Database = None):
- self.WorkspaceDir = WorkspaceDir
- self.IsToDatabase = IsToDatabase
-
- self.Cur = Database.Cur
- self.TblFile = Database.TblFile
- self.TblFdf = Database.TblFdf
- self.FileID = -1
- self.FileList = {}
-
- #
- # Load Fdf file if filename is not None
- #
- if Filename is not None:
- self.LoadFdfFile(Filename)
-
- #
- # Insert a FDF file record into database
- #
- def InsertFile(self, Filename):
- FileID = -1
- Filename = NormPath(Filename)
- if Filename not in self.FileList:
- FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_FDF)
- self.FileList[Filename] = FileID
-
- return self.FileList[Filename]
-
-
- ## Load Fdf file
- #
- # Load the file if it exists
- #
- # @param Filename: Input value for filename of Fdf file
- #
- def LoadFdfFile(self, Filename):
- FileList = []
- #
- # Parse Fdf file
- #
- Filename = NormPath(Filename)
- Fdf = FdfParser(Filename)
- Fdf.ParseFile()
-
- #
- # Insert inf file and pcd information
- #
- if self.IsToDatabase:
- (Model, Value1, Value2, Value3, Arch, BelongsToItem, BelongsToFile, StartLine, StartColumn, EndLine, EndColumn, Enabled) = \
- (0, '', '', '', 'COMMON', -1, -1, -1, -1, -1, -1, 0)
- for Index in range(0, len(Fdf.Profile.PcdDict)):
- pass
- for Key in Fdf.Profile.PcdDict.keys():
- Model = MODEL_PCD
- Value1 = ''
- Value2 = ".".join((Key[1], Key[0]))
- FileName = Fdf.Profile.PcdFileLineDict[Key][0]
- StartLine = Fdf.Profile.PcdFileLineDict[Key][1]
- BelongsToFile = self.InsertFile(FileName)
- self.TblFdf.Insert(Model, Value1, Value2, Value3, Arch, BelongsToItem, BelongsToFile, StartLine, StartColumn, EndLine, EndColumn, Enabled)
- for Index in range(0, len(Fdf.Profile.InfList)):
- Model = MODEL_META_DATA_COMPONENT
- Value1 = Fdf.Profile.InfList[Index]
- Value2 = ''
- FileName = Fdf.Profile.InfFileLineList[Index][0]
- StartLine = Fdf.Profile.InfFileLineList[Index][1]
- BelongsToFile = self.InsertFile(FileName)
- self.TblFdf.Insert(Model, Value1, Value2, Value3, Arch, BelongsToItem, BelongsToFile, StartLine, StartColumn, EndLine, EndColumn, Enabled)
-
-##
-#
-# This acts like the main() function for the script, unless it is 'import'ed into another
-# script.
-#
-if __name__ == '__main__':
- pass
diff --git a/BaseTools/Source/Python/Common/InfClassObject.py b/BaseTools/Source/Python/Common/InfClassObject.py
deleted file mode 100644
index 7a5ba4eb84ce..000000000000
--- a/BaseTools/Source/Python/Common/InfClassObject.py
+++ /dev/null
@@ -1,1105 +0,0 @@
-## @file
-# This file is used to define each component of INF file
-#
-# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-##
-# Import Modules
-#
-import Common.LongFilePathOs as os
-import re
-import EdkLogger
-from CommonDataClass.CommonClass import LibraryClassClass
-from CommonDataClass.ModuleClass import *
-from String import *
-from DataType import *
-from Identification import *
-from Dictionary import *
-from BuildToolError import *
-from Misc import sdict
-import GlobalData
-from Table.TableInf import TableInf
-import Database
-from Parsing import *
-from Common.LongFilePathSupport import OpenLongFilePath as open
-
-#
-# Global variable
-#
-Section = {TAB_UNKNOWN.upper() : MODEL_UNKNOWN,
- TAB_INF_DEFINES.upper() : MODEL_META_DATA_HEADER,
- TAB_BUILD_OPTIONS.upper() : MODEL_META_DATA_BUILD_OPTION,
- TAB_INCLUDES.upper() : MODEL_EFI_INCLUDE,
- TAB_LIBRARIES.upper() : MODEL_EFI_LIBRARY_INSTANCE,
- TAB_LIBRARY_CLASSES.upper() : MODEL_EFI_LIBRARY_CLASS,
- TAB_PACKAGES.upper() : MODEL_META_DATA_PACKAGE,
- TAB_NMAKE.upper() : MODEL_META_DATA_NMAKE,
- TAB_INF_FIXED_PCD.upper() : MODEL_PCD_FIXED_AT_BUILD,
- TAB_INF_PATCH_PCD.upper() : MODEL_PCD_PATCHABLE_IN_MODULE,
- TAB_INF_FEATURE_PCD.upper() : MODEL_PCD_FEATURE_FLAG,
- TAB_INF_PCD_EX.upper() : MODEL_PCD_DYNAMIC_EX,
- TAB_INF_PCD.upper() : MODEL_PCD_DYNAMIC,
- TAB_SOURCES.upper() : MODEL_EFI_SOURCE_FILE,
- TAB_GUIDS.upper() : MODEL_EFI_GUID,
- TAB_PROTOCOLS.upper() : MODEL_EFI_PROTOCOL,
- TAB_PPIS.upper() : MODEL_EFI_PPI,
- TAB_DEPEX.upper() : MODEL_EFI_DEPEX,
- TAB_BINARIES.upper() : MODEL_EFI_BINARY_FILE,
- TAB_USER_EXTENSIONS.upper() : MODEL_META_DATA_USER_EXTENSION
- }
-
-gComponentType2ModuleType = {
- "LIBRARY" : "BASE",
- "SECURITY_CORE" : "SEC",
- "PEI_CORE" : "PEI_CORE",
- "COMBINED_PEIM_DRIVER" : "PEIM",
- "PIC_PEIM" : "PEIM",
- "RELOCATABLE_PEIM" : "PEIM",
- "PE32_PEIM" : "PEIM",
- "BS_DRIVER" : "DXE_DRIVER",
- "RT_DRIVER" : "DXE_RUNTIME_DRIVER",
- "SAL_RT_DRIVER" : "DXE_SAL_DRIVER",
- "APPLICATION" : "UEFI_APPLICATION",
- "LOGO" : "BASE",
-}
-
-gNmakeFlagPattern = re.compile("(?:EBC_)?([A-Z]+)_(?:STD_|PROJ_|ARCH_)?FLAGS(?:_DLL|_ASL|_EXE)?", re.UNICODE)
-gNmakeFlagName2ToolCode = {
- "C" : "CC",
- "LIB" : "SLINK",
- "LINK" : "DLINK",
-}
-
-class InfHeader(ModuleHeaderClass):
- _Mapping_ = {
- #
- # Required Fields
- #
- TAB_INF_DEFINES_BASE_NAME : "Name",
- TAB_INF_DEFINES_FILE_GUID : "Guid",
- TAB_INF_DEFINES_MODULE_TYPE : "ModuleType",
- TAB_INF_DEFINES_EFI_SPECIFICATION_VERSION : "UefiSpecificationVersion",
- TAB_INF_DEFINES_UEFI_SPECIFICATION_VERSION : "UefiSpecificationVersion",
- TAB_INF_DEFINES_EDK_RELEASE_VERSION : "EdkReleaseVersion",
- #
- # Optional Fields
- #
- TAB_INF_DEFINES_INF_VERSION : "InfVersion",
- TAB_INF_DEFINES_BINARY_MODULE : "BinaryModule",
- TAB_INF_DEFINES_COMPONENT_TYPE : "ComponentType",
- TAB_INF_DEFINES_MAKEFILE_NAME : "MakefileName",
- TAB_INF_DEFINES_BUILD_NUMBER : "BuildNumber",
- TAB_INF_DEFINES_BUILD_TYPE : "BuildType",
- TAB_INF_DEFINES_FFS_EXT : "FfsExt",
- TAB_INF_DEFINES_FV_EXT : "FvExt",
- TAB_INF_DEFINES_SOURCE_FV : "SourceFv",
- TAB_INF_DEFINES_VERSION_NUMBER : "VersionNumber",
- TAB_INF_DEFINES_VERSION_STRING : "VersionString",
- TAB_INF_DEFINES_VERSION : "Version",
- TAB_INF_DEFINES_PCD_IS_DRIVER : "PcdIsDriver",
- TAB_INF_DEFINES_TIANO_EDK_FLASHMAP_H : "TianoEdkFlashMap_h",
- TAB_INF_DEFINES_SHADOW : "Shadow",
-# TAB_INF_DEFINES_LIBRARY_CLASS : "LibraryClass",
-# TAB_INF_DEFINES_ENTRY_POINT : "ExternImages",
-# TAB_INF_DEFINES_UNLOAD_IMAGE : "ExternImages",
-# TAB_INF_DEFINES_CONSTRUCTOR : ,
-# TAB_INF_DEFINES_DESTRUCTOR : ,
-# TAB_INF_DEFINES_DEFINE : "Define",
-# TAB_INF_DEFINES_SPEC : "Specification",
-# TAB_INF_DEFINES_CUSTOM_MAKEFILE : "CustomMakefile",
-# TAB_INF_DEFINES_MACRO :
- }
-
- def __init__(self):
- ModuleHeaderClass.__init__(self)
- self.VersionNumber = ''
- self.VersionString = ''
- #print self.__dict__
- def __setitem__(self, key, value):
- self.__dict__[self._Mapping_[key]] = value
- def __getitem__(self, key):
- return self.__dict__[self._Mapping_[key]]
- ## "in" test support
- def __contains__(self, key):
- return key in self._Mapping_
-
-## Inf
-#
-# This class defined the structure used in Inf object
-#
-# @param Ffilename: Input value for Ffilename of Inf file, default is None
-# @param IsMergeAllArches: Input value for IsMergeAllArches
-# True is to merge all arches
-# Fales is not to merge all arches
-# default is False
-# @param IsToModule: Input value for IsToModule
-# True is to transfer to ModuleObject automatically
-# False is not to transfer to ModuleObject automatically
-# default is False
-# @param WorkspaceDir: Input value for current workspace directory, default is None
-#
-# @var Identification: To store value for Identification, it is a structure as Identification
-# @var UserExtensions: To store value for UserExtensions
-# @var Module: To store value for Module, it is a structure as ModuleClass
-# @var WorkspaceDir: To store value for WorkspaceDir
-# @var KeyList: To store value for KeyList, a list for all Keys used in Inf
-#
-class Inf(object):
- def __init__(self, Filename=None, IsToDatabase=False, IsToModule=False, WorkspaceDir=None, Database=None, SupArchList=DataType.ARCH_LIST):
- self.Identification = Identification()
- self.Module = ModuleClass()
- self.UserExtensions = ''
- self.WorkspaceDir = WorkspaceDir
- self.SupArchList = SupArchList
- self.IsToDatabase = IsToDatabase
-
- self.Cur = Database.Cur
- self.TblFile = Database.TblFile
- self.TblInf = Database.TblInf
- self.FileID = -1
- #self.TblInf = TableInf(Database.Cur)
-
- self.KeyList = [
- TAB_SOURCES, TAB_BUILD_OPTIONS, TAB_BINARIES, TAB_INCLUDES, TAB_GUIDS,
- TAB_PROTOCOLS, TAB_PPIS, TAB_LIBRARY_CLASSES, TAB_PACKAGES, TAB_LIBRARIES,
- TAB_INF_FIXED_PCD, TAB_INF_PATCH_PCD, TAB_INF_FEATURE_PCD, TAB_INF_PCD,
- TAB_INF_PCD_EX, TAB_DEPEX, TAB_NMAKE, TAB_INF_DEFINES
- ]
- #
- # Upper all KEYs to ignore case sensitive when parsing
- #
- self.KeyList = map(lambda c: c.upper(), self.KeyList)
-
- #
- # Init RecordSet
- #
- self.RecordSet = {}
- for Key in self.KeyList:
- self.RecordSet[Section[Key]] = []
-
- #
- # Load Inf file if filename is not None
- #
- if Filename is not None:
- self.LoadInfFile(Filename)
-
- #
- # Transfer to Module Object if IsToModule is True
- #
- if IsToModule:
- self.InfToModule()
-
- ## Transfer to Module Object
- #
- # Transfer all contents of an Inf file to a standard Module Object
- #
- def InfToModule(self):
- #
- # Init global information for the file
- #
- ContainerFile = self.Identification.FileFullPath
-
- #
- # Generate Package Header
- #
- self.GenModuleHeader(ContainerFile)
-
- #
- # Generate BuildOptions
- #
- self.GenBuildOptions(ContainerFile)
-
- #
- # Generate Includes
- #
- self.GenIncludes(ContainerFile)
-
- #
- # Generate Libraries
- #
- self.GenLibraries(ContainerFile)
-
- #
- # Generate LibraryClasses
- #
- self.GenLibraryClasses(ContainerFile)
-
- #
- # Generate Packages
- #
- self.GenPackages(ContainerFile)
-
- #
- # Generate Nmakes
- #
- self.GenNmakes(ContainerFile)
-
- #
- # Generate Pcds
- #
- self.GenPcds(ContainerFile)
-
- #
- # Generate Sources
- #
- self.GenSources(ContainerFile)
-
- #
- # Generate UserExtensions
- #
- self.GenUserExtensions(ContainerFile)
-
- #
- # Generate Guids
- #
- self.GenGuidProtocolPpis(DataType.TAB_GUIDS, ContainerFile)
-
- #
- # Generate Protocols
- #
- self.GenGuidProtocolPpis(DataType.TAB_PROTOCOLS, ContainerFile)
-
- #
- # Generate Ppis
- #
- self.GenGuidProtocolPpis(DataType.TAB_PPIS, ContainerFile)
-
- #
- # Generate Depexes
- #
- self.GenDepexes(ContainerFile)
-
- #
- # Generate Binaries
- #
- self.GenBinaries(ContainerFile)
-
- ## Parse [Defines] section
- #
- # Parse [Defines] section into InfDefines object
- #
- # @param InfFile The path of the INF file
- # @param Section The title of "Defines" section
- # @param Lines The content of "Defines" section
- #
- def ParseDefines(self, InfFile, Section, Lines):
- TokenList = Section.split(TAB_SPLIT)
- if len(TokenList) == 3:
- RaiseParserError(Section, "Defines", InfFile, "[xx.yy.%s] format (with platform) is not supported")
- if len(TokenList) == 2:
- Arch = TokenList[1].upper()
- else:
- Arch = TAB_ARCH_COMMON
-
- if Arch not in self.Defines:
- self.Defines[Arch] = InfDefines()
- GetSingleValueOfKeyFromLines(Lines, self.Defines[Arch].DefinesDictionary,
- TAB_COMMENT_SPLIT, TAB_EQUAL_SPLIT, False, None)
-
- ## Load Inf file
- #
- # Load the file if it exists
- #
- # @param Filename: Input value for filename of Inf file
- #
- def LoadInfFile(self, Filename):
- #
- # Insert a record for file
- #
- Filename = NormPath(Filename)
- self.Identification.FileFullPath = Filename
- (self.Identification.FileRelativePath, self.Identification.FileName) = os.path.split(Filename)
- self.FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_INF)
-
- #
- # Init InfTable
- #
- #self.TblInf.Table = "Inf%s" % self.FileID
- #self.TblInf.Create()
-
- #
- # Init common datas
- #
- IfDefList, SectionItemList, CurrentSection, ArchList, ThirdList, IncludeFiles = \
- [], [], TAB_UNKNOWN, [], [], []
- LineNo = 0
-
- #
- # Parse file content
- #
- IsFindBlockComment = False
- ReservedLine = ''
- for Line in open(Filename, 'r'):
- LineNo = LineNo + 1
- #
- # Remove comment block
- #
- if Line.find(TAB_COMMENT_EDK_START) > -1:
- ReservedLine = GetSplitList(Line, TAB_COMMENT_EDK_START, 1)[0]
- IsFindBlockComment = True
- if Line.find(TAB_COMMENT_EDK_END) > -1:
- Line = ReservedLine + GetSplitList(Line, TAB_COMMENT_EDK_END, 1)[1]
- ReservedLine = ''
- IsFindBlockComment = False
- if IsFindBlockComment:
- continue
-
- #
- # Remove comments at tail and remove spaces again
- #
- Line = CleanString(Line)
- if Line == '':
- continue
-
- #
- # Find a new section tab
- # First insert previous section items
- # And then parse the content of the new section
- #
- if Line.startswith(TAB_SECTION_START) and Line.endswith(TAB_SECTION_END):
- if Line[1:3] == "--":
- continue
- Model = Section[CurrentSection.upper()]
- #
- # Insert items data of previous section
- #
- InsertSectionItemsIntoDatabase(self.TblInf, self.FileID, Filename, Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList, self.RecordSet)
- #
- # Parse the new section
- #
- SectionItemList = []
- ArchList = []
- ThirdList = []
-
- CurrentSection = ''
- LineList = GetSplitValueList(Line[len(TAB_SECTION_START):len(Line) - len(TAB_SECTION_END)], TAB_COMMA_SPLIT)
- for Item in LineList:
- ItemList = GetSplitValueList(Item, TAB_SPLIT)
- if CurrentSection == '':
- CurrentSection = ItemList[0]
- else:
- if CurrentSection != ItemList[0]:
- EdkLogger.error("Parser", PARSER_ERROR, "Different section names '%s' and '%s' are found in one section definition, this is not allowed." % (CurrentSection, ItemList[0]), File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
- if CurrentSection.upper() not in self.KeyList:
- RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
- CurrentSection = TAB_UNKNOWN
- continue
- ItemList.append('')
- ItemList.append('')
- if len(ItemList) > 5:
- RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
- else:
- if ItemList[1] != '' and ItemList[1].upper() not in ARCH_LIST_FULL:
- EdkLogger.error("Parser", PARSER_ERROR, "Invalid Arch definition '%s' found" % ItemList[1], File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
- ArchList.append(ItemList[1].upper())
- ThirdList.append(ItemList[2])
-
- continue
-
- #
- # Not in any defined section
- #
- if CurrentSection == TAB_UNKNOWN:
- ErrorMsg = "%s is not in any defined section" % Line
- EdkLogger.error("Parser", PARSER_ERROR, ErrorMsg, File=Filename, Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
-
- #
- # Add a section item
- #
- SectionItemList.append([Line, LineNo])
- # End of parse
- #End of For
-
- #
- # Insert items data of last section
- #
- Model = Section[CurrentSection.upper()]
- InsertSectionItemsIntoDatabase(self.TblInf, self.FileID, Filename, Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList, self.RecordSet)
-
- #
- # Replace all DEFINE macros with its actual values
- #
- ParseDefineMacro2(self.TblInf, self.RecordSet, GlobalData.gGlobalDefines)
-
- ## Show detailed information of Module
- #
- # Print all members and their values of Module class
- #
- def ShowModule(self):
- M = self.Module
- for Arch in M.Header.keys():
- print '\nArch =', Arch
- print 'Filename =', M.Header[Arch].FileName
- print 'FullPath =', M.Header[Arch].FullPath
- print 'BaseName =', M.Header[Arch].Name
- print 'Guid =', M.Header[Arch].Guid
- print 'Version =', M.Header[Arch].Version
- print 'InfVersion =', M.Header[Arch].InfVersion
- print 'UefiSpecificationVersion =', M.Header[Arch].UefiSpecificationVersion
- print 'EdkReleaseVersion =', M.Header[Arch].EdkReleaseVersion
- print 'ModuleType =', M.Header[Arch].ModuleType
- print 'BinaryModule =', M.Header[Arch].BinaryModule
- print 'ComponentType =', M.Header[Arch].ComponentType
- print 'MakefileName =', M.Header[Arch].MakefileName
- print 'BuildNumber =', M.Header[Arch].BuildNumber
- print 'BuildType =', M.Header[Arch].BuildType
- print 'FfsExt =', M.Header[Arch].FfsExt
- print 'FvExt =', M.Header[Arch].FvExt
- print 'SourceFv =', M.Header[Arch].SourceFv
- print 'PcdIsDriver =', M.Header[Arch].PcdIsDriver
- print 'TianoEdkFlashMap_h =', M.Header[Arch].TianoEdkFlashMap_h
- print 'Shadow =', M.Header[Arch].Shadow
- print 'LibraryClass =', M.Header[Arch].LibraryClass
- for Item in M.Header[Arch].LibraryClass:
- print Item.LibraryClass, DataType.TAB_VALUE_SPLIT.join(Item.SupModuleList)
- print 'CustomMakefile =', M.Header[Arch].CustomMakefile
- print 'Define =', M.Header[Arch].Define
- print 'Specification =', M.Header[Arch].Specification
- for Item in self.Module.ExternImages:
- print '\nEntry_Point = %s, UnloadImage = %s' % (Item.ModuleEntryPoint, Item.ModuleUnloadImage)
- for Item in self.Module.ExternLibraries:
- print 'Constructor = %s, Destructor = %s' % (Item.Constructor, Item.Destructor)
- print '\nBuildOptions =', M.BuildOptions
- for Item in M.BuildOptions:
- print Item.ToolChainFamily, Item.ToolChain, Item.Option, Item.SupArchList
- print '\nIncludes =', M.Includes
- for Item in M.Includes:
- print Item.FilePath, Item.SupArchList
- print '\nLibraries =', M.Libraries
- for Item in M.Libraries:
- print Item.Library, Item.SupArchList
- print '\nLibraryClasses =', M.LibraryClasses
- for Item in M.LibraryClasses:
- print Item.LibraryClass, Item.RecommendedInstance, Item.FeatureFlag, Item.SupModuleList, Item.SupArchList, Item.Define
- print '\nPackageDependencies =', M.PackageDependencies
- for Item in M.PackageDependencies:
- print Item.FilePath, Item.SupArchList, Item.FeatureFlag
- print '\nNmake =', M.Nmake
- for Item in M.Nmake:
- print Item.Name, Item.Value, Item.SupArchList
- print '\nPcds =', M.PcdCodes
- for Item in M.PcdCodes:
- print '\tCName=', Item.CName, 'TokenSpaceGuidCName=', Item.TokenSpaceGuidCName, 'DefaultValue=', Item.DefaultValue, 'ItemType=', Item.ItemType, Item.SupArchList
- print '\nSources =', M.Sources
- for Source in M.Sources:
- print Source.SourceFile, 'Fam=', Source.ToolChainFamily, 'Pcd=', Source.FeatureFlag, 'Tag=', Source.TagName, 'ToolCode=', Source.ToolCode, Source.SupArchList
- print '\nUserExtensions =', M.UserExtensions
- for UserExtension in M.UserExtensions:
- print UserExtension.UserID, UserExtension.Identifier, UserExtension.Content
- print '\nGuids =', M.Guids
- for Item in M.Guids:
- print Item.CName, Item.SupArchList, Item.FeatureFlag
- print '\nProtocols =', M.Protocols
- for Item in M.Protocols:
- print Item.CName, Item.SupArchList, Item.FeatureFlag
- print '\nPpis =', M.Ppis
- for Item in M.Ppis:
- print Item.CName, Item.SupArchList, Item.FeatureFlag
- print '\nDepex =', M.Depex
- for Item in M.Depex:
- print Item.Depex, Item.SupArchList, Item.Define
- print '\nBinaries =', M.Binaries
- for Binary in M.Binaries:
- print 'Type=', Binary.FileType, 'Target=', Binary.Target, 'Name=', Binary.BinaryFile, 'FeatureFlag=', Binary.FeatureFlag, 'SupArchList=', Binary.SupArchList
-
- ## Convert [Defines] section content to ModuleHeaderClass
- #
- # Convert [Defines] section content to ModuleHeaderClass
- #
- # @param Defines The content under [Defines] section
- # @param ModuleHeader An object of ModuleHeaderClass
- # @param Arch The supported ARCH
- #
- def GenModuleHeader(self, ContainerFile):
- EdkLogger.debug(2, "Generate ModuleHeader ...")
- File = self.Identification.FileFullPath
- #
- # Update all defines item in database
- #
- RecordSet = self.RecordSet[MODEL_META_DATA_HEADER]
- for Record in RecordSet:
- ValueList = GetSplitValueList(Record[0], TAB_EQUAL_SPLIT)
- if len(ValueList) != 2:
- RaiseParserError(Record[0], 'Defines', ContainerFile, '<Key> = <Value>', Record[2])
- ID, Value1, Value2, Arch, LineNo = Record[3], ValueList[0], ValueList[1], Record[1], Record[2]
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
- where ID = %s""" % (self.TblInf.Table, ConvertToSqlString2(Value1), ConvertToSqlString2(Value2), ID)
- self.TblInf.Exec(SqlCommand)
-
- for Arch in DataType.ARCH_LIST:
- ModuleHeader = InfHeader()
- ModuleHeader.FileName = self.Identification.FileName
- ModuleHeader.FullPath = self.Identification.FileFullPath
- DefineList = QueryDefinesItem2(self.TblInf, Arch, self.FileID)
-
- NotProcessedDefineList = []
- for D in DefineList:
- if D[0] in ModuleHeader:
- ModuleHeader[D[0]] = GetSplitValueList(D[1])[0]
- else:
- NotProcessedDefineList.append(D)
-
- if ModuleHeader.ComponentType == "LIBRARY":
- Lib = LibraryClassClass()
- Lib.LibraryClass = ModuleHeader.Name
- Lib.SupModuleList = DataType.SUP_MODULE_LIST
- ModuleHeader.LibraryClass.append(Lib)
-
- # we need to make some key defines resolved first
- for D in NotProcessedDefineList:
- if D[0] == TAB_INF_DEFINES_LIBRARY_CLASS:
- List = GetSplitValueList(D[1], DataType.TAB_VALUE_SPLIT, 1)
- Lib = LibraryClassClass()
- Lib.LibraryClass = CleanString(List[0])
- if len(List) == 1:
- Lib.SupModuleList = DataType.SUP_MODULE_LIST
- elif len(List) == 2:
- Lib.SupModuleList = GetSplitValueList(CleanString(List[1]), ' ')
- ModuleHeader.LibraryClass.append(Lib)
- elif D[0] == TAB_INF_DEFINES_CUSTOM_MAKEFILE:
- List = D[1].split(DataType.TAB_VALUE_SPLIT)
- if len(List) == 2:
- ModuleHeader.CustomMakefile[CleanString(List[0])] = CleanString(List[1])
- else:
- RaiseParserError(D[1], 'CUSTOM_MAKEFILE of Defines', File, 'CUSTOM_MAKEFILE=<Family>|<Filename>', D[2])
- elif D[0] == TAB_INF_DEFINES_ENTRY_POINT:
- Image = ModuleExternImageClass()
- Image.ModuleEntryPoint = CleanString(D[1])
- self.Module.ExternImages.append(Image)
- elif D[0] == TAB_INF_DEFINES_UNLOAD_IMAGE:
- Image = ModuleExternImageClass()
- Image.ModuleUnloadImage = CleanString(D[1])
- self.Module.ExternImages.append(Image)
- elif D[0] == TAB_INF_DEFINES_CONSTRUCTOR:
- LibraryClass = ModuleExternLibraryClass()
- LibraryClass.Constructor = CleanString(D[1])
- self.Module.ExternLibraries.append(LibraryClass)
- elif D[0] == TAB_INF_DEFINES_DESTRUCTOR:
- LibraryClass = ModuleExternLibraryClass()
- LibraryClass.Destructor = CleanString(D[1])
- self.Module.ExternLibraries.append(LibraryClass)
- elif D[0] == TAB_INF_DEFINES_DEFINE:
- List = D[1].split(DataType.TAB_EQUAL_SPLIT)
- if len(List) != 2:
- RaiseParserError(Item, 'DEFINE of Defines', File, 'DEFINE <Word> = <Word>', D[2])
- else:
- ModuleHeader.Define[CleanString(List[0])] = CleanString(List[1])
- elif D[0] == TAB_INF_DEFINES_SPEC:
- List = D[1].split(DataType.TAB_EQUAL_SPLIT)
- if len(List) != 2:
- RaiseParserError(Item, 'SPEC of Defines', File, 'SPEC <Word> = <Version>', D[2])
- else:
- ModuleHeader.Specification[CleanString(List[0])] = CleanString(List[1])
-
- #
- # Get version of INF
- #
- if ModuleHeader.InfVersion != "":
- # EdkII inf
- VersionNumber = ModuleHeader.VersionNumber
- VersionString = ModuleHeader.VersionString
- if len(VersionNumber) > 0 and len(VersionString) == 0:
- EdkLogger.warn(2000, 'VERSION_NUMBER depricated; INF file %s should be modified to use VERSION_STRING instead.' % self.Identification.FileFullPath)
- ModuleHeader.Version = VersionNumber
- if len(VersionString) > 0:
- if len(VersionNumber) > 0:
- EdkLogger.warn(2001, 'INF file %s defines both VERSION_NUMBER and VERSION_STRING, using VERSION_STRING' % self.Identification.FileFullPath)
- ModuleHeader.Version = VersionString
- else:
- # Edk inf
- ModuleHeader.InfVersion = "0x00010000"
- if ModuleHeader.ComponentType in gComponentType2ModuleType:
- ModuleHeader.ModuleType = gComponentType2ModuleType[ModuleHeader.ComponentType]
- elif ModuleHeader.ComponentType != '':
- EdkLogger.error("Parser", PARSER_ERROR, "Unsupported Edk component type [%s]" % ModuleHeader.ComponentType, ExtraData=File, RaiseError=EdkLogger.IsRaiseError)
-
- self.Module.Header[Arch] = ModuleHeader
-
-
- ## GenBuildOptions
- #
- # Gen BuildOptions of Inf
- # [<Family>:]<ToolFlag>=Flag
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenBuildOptions(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_BUILD_OPTIONS)
- BuildOptions = {}
- #
- # Get all BuildOptions
- #
- RecordSet = self.RecordSet[MODEL_META_DATA_BUILD_OPTION]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (Family, ToolChain, Flag) = GetBuildOption(Record[0], ContainerFile, Record[2])
- MergeArches(BuildOptions, (Family, ToolChain, Flag), Arch)
- #
- # Update to Database
- #
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s', Value3 = '%s'
- where ID = %s""" % (self.TblInf.Table, ConvertToSqlString2(Family), ConvertToSqlString2(ToolChain), ConvertToSqlString2(Flag), Record[3])
- self.TblInf.Exec(SqlCommand)
-
- for Key in BuildOptions.keys():
- BuildOption = BuildOptionClass(Key[0], Key[1], Key[2])
- BuildOption.SupArchList = BuildOptions[Key]
- self.Module.BuildOptions.append(BuildOption)
-
- ## GenIncludes
- #
- # Gen Includes of Inf
- #
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenIncludes(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_INCLUDES)
- Includes = sdict()
- #
- # Get all Includes
- #
- RecordSet = self.RecordSet[MODEL_EFI_INCLUDE]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- MergeArches(Includes, Record[0], Arch)
-
- for Key in Includes.keys():
- Include = IncludeClass()
- Include.FilePath = NormPath(Key)
- Include.SupArchList = Includes[Key]
- self.Module.Includes.append(Include)
-
- ## GenLibraries
- #
- # Gen Libraries of Inf
- #
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenLibraries(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARIES)
- Libraries = sdict()
- #
- # Get all Includes
- #
- RecordSet = self.RecordSet[MODEL_EFI_LIBRARY_INSTANCE]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- MergeArches(Libraries, Record[0], Arch)
-
- for Key in Libraries.keys():
- Library = ModuleLibraryClass()
- # replace macro and remove file extension
- Library.Library = Key.rsplit('.', 1)[0]
- Library.SupArchList = Libraries[Key]
- self.Module.Libraries.append(Library)
-
- ## GenLibraryClasses
- #
- # Get LibraryClass of Inf
- # <LibraryClassKeyWord>|<LibraryInstance>
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenLibraryClasses(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARY_CLASSES)
- LibraryClasses = {}
- #
- # Get all LibraryClasses
- #
- RecordSet = self.RecordSet[MODEL_EFI_LIBRARY_CLASS]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (LibClassName, LibClassIns, Pcd, SupModelList) = GetLibraryClassOfInf([Record[0], Record[4]], ContainerFile, self.WorkspaceDir, Record[2])
- MergeArches(LibraryClasses, (LibClassName, LibClassIns, Pcd, SupModelList), Arch)
- #
- # Update to Database
- #
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s', Value3 = '%s'
- where ID = %s""" % (self.TblInf.Table, ConvertToSqlString2(LibClassName), ConvertToSqlString2(LibClassIns), ConvertToSqlString2(SupModelList), Record[3])
- self.TblInf.Exec(SqlCommand)
-
- for Key in LibraryClasses.keys():
- KeyList = Key[0].split(DataType.TAB_VALUE_SPLIT)
- LibraryClass = LibraryClassClass()
- LibraryClass.LibraryClass = Key[0]
- LibraryClass.RecommendedInstance = NormPath(Key[1])
- LibraryClass.FeatureFlag = Key[2]
- LibraryClass.SupArchList = LibraryClasses[Key]
- LibraryClass.SupModuleList = GetSplitValueList(Key[3])
- self.Module.LibraryClasses.append(LibraryClass)
-
- ## GenPackages
- #
- # Gen Packages of Inf
- #
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenPackages(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_PACKAGES)
- Packages = {}
- #
- # Get all Packages
- #
- RecordSet = self.RecordSet[MODEL_META_DATA_PACKAGE]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (Package, Pcd) = GetPackage(Record[0], ContainerFile, self.WorkspaceDir, Record[2])
- MergeArches(Packages, (Package, Pcd), Arch)
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
- where ID = %s""" % (self.TblInf.Table, ConvertToSqlString2(Package), ConvertToSqlString2(Pcd), Record[3])
- self.TblInf.Exec(SqlCommand)
-
-
- for Key in Packages.keys():
- Package = ModulePackageDependencyClass()
- Package.FilePath = NormPath(Key[0])
- Package.SupArchList = Packages[Key]
- Package.FeatureFlag = Key[1]
- self.Module.PackageDependencies.append(Package)
-
- ## GenNmakes
- #
- # Gen Nmakes of Inf
- #
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenNmakes(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_NMAKE)
- Nmakes = sdict()
- #
- # Get all Nmakes
- #
- RecordSet = self.RecordSet[MODEL_META_DATA_NMAKE]
-
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- MergeArches(Nmakes, Record[0], Arch)
-
- for Key in Nmakes.keys():
- List = GetSplitValueList(Key, DataType.TAB_EQUAL_SPLIT, MaxSplit=1)
- if len(List) != 2:
- RaiseParserError(Key, 'Nmake', ContainerFile, '<MacroName> = <Value>')
- continue
- Nmake = ModuleNmakeClass()
- Nmake.Name = List[0]
- Nmake.Value = List[1]
- Nmake.SupArchList = Nmakes[Key]
- self.Module.Nmake.append(Nmake)
-
- # convert Edk format to EdkII format
- if Nmake.Name == "IMAGE_ENTRY_POINT":
- Image = ModuleExternImageClass()
- Image.ModuleEntryPoint = Nmake.Value
- self.Module.ExternImages.append(Image)
- elif Nmake.Name == "DPX_SOURCE":
- Source = ModuleSourceFileClass(NormPath(Nmake.Value), "", "", "", "", Nmake.SupArchList)
- self.Module.Sources.append(Source)
- else:
- ToolList = gNmakeFlagPattern.findall(Nmake.Name)
- if len(ToolList) == 0 or len(ToolList) != 1:
- EdkLogger.warn("\nParser", "Don't know how to do with MACRO: %s" % Nmake.Name,
- ExtraData=ContainerFile)
- else:
- if ToolList[0] in gNmakeFlagName2ToolCode:
- Tool = gNmakeFlagName2ToolCode[ToolList[0]]
- else:
- Tool = ToolList[0]
- BuildOption = BuildOptionClass("MSFT", "*_*_*_%s_FLAGS" % Tool, Nmake.Value)
- BuildOption.SupArchList = Nmake.SupArchList
- self.Module.BuildOptions.append(BuildOption)
-
- ## GenPcds
- #
- # Gen Pcds of Inf
- # <TokenSpaceGuidCName>.<PcdCName>[|<Value>]
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenPcds(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_PCDS)
- Pcds = {}
- PcdToken = {}
-
- #
- # Get all Guids
- #
- RecordSet1 = self.RecordSet[MODEL_PCD_FIXED_AT_BUILD]
- RecordSet2 = self.RecordSet[MODEL_PCD_PATCHABLE_IN_MODULE]
- RecordSet3 = self.RecordSet[MODEL_PCD_FEATURE_FLAG]
- RecordSet4 = self.RecordSet[MODEL_PCD_DYNAMIC_EX]
- RecordSet5 = self.RecordSet[MODEL_PCD_DYNAMIC]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet1:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- if self.Module.Header[Arch].LibraryClass != {}:
- pass
- (TokenGuidCName, TokenName, Value, Type) = GetPcdOfInf(Record[0], TAB_PCDS_FIXED_AT_BUILD, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet2:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, Type) = GetPcdOfInf(Record[0], TAB_PCDS_PATCHABLE_IN_MODULE, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet3:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, Type) = GetPcdOfInf(Record[0], TAB_PCDS_FEATURE_FLAG, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet4:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, Type) = GetPcdOfInf(Record[0], TAB_PCDS_DYNAMIC_EX, ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- for Record in RecordSet5:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (TokenGuidCName, TokenName, Value, Type) = GetPcdOfInf(Record[0], "", ContainerFile, Record[2])
- MergeArches(Pcds, (TokenGuidCName, TokenName, Value, Type), Arch)
- PcdToken[Record[3]] = (TokenGuidCName, TokenName)
- #
- # Update to database
- #
- if self.IsToDatabase:
- for Key in PcdToken.keys():
- SqlCommand = """update %s set Value2 = '%s' where ID = %s""" % (self.TblInf.Table, ".".join((PcdToken[Key][0], PcdToken[Key][1])), Key)
- self.TblInf.Exec(SqlCommand)
-
- for Key in Pcds.keys():
- Pcd = PcdClass()
- Pcd.CName = Key[1]
- Pcd.TokenSpaceGuidCName = Key[0]
- Pcd.DefaultValue = Key[2]
- Pcd.ItemType = Key[3]
- Pcd.SupArchList = Pcds[Key]
- self.Module.PcdCodes.append(Pcd)
-
- ## GenSources
- #
- # Gen Sources of Inf
- # <Filename>[|<Family>[|<TagName>[|<ToolCode>[|<PcdFeatureFlag>]]]]
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenSources(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_SOURCES)
- Sources = {}
-
- #
- # Get all Nmakes
- #
- RecordSet = self.RecordSet[MODEL_EFI_SOURCE_FILE]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (Filename, Family, TagName, ToolCode, Pcd) = GetSource(Record[0], ContainerFile, self.Identification.FileRelativePath, Record[2])
- MergeArches(Sources, (Filename, Family, TagName, ToolCode, Pcd), Arch)
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s', Value3 = '%s', Value4 = '%s', Value5 = '%s'
- where ID = %s""" % (self.TblInf.Table, ConvertToSqlString2(Filename), ConvertToSqlString2(Family), ConvertToSqlString2(TagName), ConvertToSqlString2(ToolCode), ConvertToSqlString2(Pcd), Record[3])
- self.TblInf.Exec(SqlCommand)
-
- for Key in Sources.keys():
- Source = ModuleSourceFileClass(Key[0], Key[2], Key[3], Key[1], Key[4], Sources[Key])
- self.Module.Sources.append(Source)
-
- ## GenUserExtensions
- #
- # Gen UserExtensions of Inf
- #
- def GenUserExtensions(self, ContainerFile):
-# #
-# # UserExtensions
-# #
-# if self.UserExtensions != '':
-# UserExtension = UserExtensionsClass()
-# Lines = self.UserExtensions.splitlines()
-# List = GetSplitValueList(Lines[0], DataType.TAB_SPLIT, 2)
-# if len(List) != 3:
-# RaiseParserError(Lines[0], 'UserExtensions', File, "UserExtensions.UserId.'Identifier'")
-# else:
-# UserExtension.UserID = List[1]
-# UserExtension.Identifier = List[2][0:-1].replace("'", '').replace('\"', '')
-# for Line in Lines[1:]:
-# UserExtension.Content = UserExtension.Content + CleanString(Line) + '\n'
-# self.Module.UserExtensions.append(UserExtension)
- pass
-
- ## GenDepexes
- #
- # Gen Depex of Inf
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenDepexes(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_DEPEX)
- Depex = {}
- #
- # Get all Depexes
- #
- RecordSet = self.RecordSet[MODEL_EFI_DEPEX]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- Line = ''
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- Line = Line + Record[0] + ' '
- if Line != '':
- MergeArches(Depex, Line, Arch)
-
- for Key in Depex.keys():
- Dep = ModuleDepexClass()
- Dep.Depex = Key
- Dep.SupArchList = Depex[Key]
- self.Module.Depex.append(Dep)
-
- ## GenBinaries
- #
- # Gen Binary of Inf
- # <FileType>|<Filename>|<Target>[|<TokenSpaceGuidCName>.<PcdCName>]
- #
- # @param ContainerFile: The Dec file full path
- #
- def GenBinaries(self, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % TAB_BINARIES)
- Binaries = {}
-
- #
- # Get all Guids
- #
- RecordSet = self.RecordSet[MODEL_EFI_BINARY_FILE]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (FileType, Filename, Target, Pcd) = GetBinary(Record[0], ContainerFile, self.Identification.FileRelativePath, Record[2])
- MergeArches(Binaries, (FileType, Filename, Target, Pcd), Arch)
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s', Value3 = '%s', Value4 = '%s'
- where ID = %s""" % (self.TblInf.Table, ConvertToSqlString2(FileType), ConvertToSqlString2(Filename), ConvertToSqlString2(Target), ConvertToSqlString2(Pcd), Record[3])
- self.TblInf.Exec(SqlCommand)
-
- for Key in Binaries.keys():
- Binary = ModuleBinaryFileClass(NormPath(Key[1]), Key[0], Key[2], Key[3], Binaries[Key])
- self.Module.Binaries.append(Binary)
-
- ## GenGuids
- #
- # Gen Guids of Inf
- # <CName>=<GuidValue>
- #
- # @param ContainerFile: The Inf file full path
- #
- def GenGuidProtocolPpis(self, Type, ContainerFile):
- EdkLogger.debug(2, "Generate %s ..." % Type)
- Lists = {}
- #
- # Get all Items
- #
- RecordSet = self.RecordSet[Section[Type.upper()]]
-
- #
- # Go through each arch
- #
- for Arch in self.SupArchList:
- for Record in RecordSet:
- if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
- (Name, Value) = GetGuidsProtocolsPpisOfInf(Record[0], Type, ContainerFile, Record[2])
- MergeArches(Lists, (Name, Value), Arch)
- if self.IsToDatabase:
- SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
- where ID = %s""" % (self.TblInf.Table, ConvertToSqlString2(Name), ConvertToSqlString2(Value), Record[3])
- self.TblInf.Exec(SqlCommand)
-
- ListMember = None
- if Type == TAB_GUIDS:
- ListMember = self.Module.Guids
- elif Type == TAB_PROTOCOLS:
- ListMember = self.Module.Protocols
- elif Type == TAB_PPIS:
- ListMember = self.Module.Ppis
-
- for Key in Lists.keys():
- ListClass = GuidProtocolPpiCommonClass()
- ListClass.CName = Key[0]
- ListClass.SupArchList = Lists[Key]
- ListClass.FeatureFlag = Key[1]
- ListMember.append(ListClass)
-
-##
-#
-# This acts like the main() function for the script, unless it is 'import'ed into another
-# script.
-#
-if __name__ == '__main__':
- EdkLogger.Initialize()
- EdkLogger.SetLevel(EdkLogger.DEBUG_0)
-
- W = os.getenv('WORKSPACE')
- F = os.path.join(W, 'MdeModulePkg/Application/HelloWorld/HelloWorld.inf')
-
- Db = Database.Database('Inf.db')
- Db.InitDatabase()
-
- P = Inf(os.path.normpath(F), True, True, W, Db)
- P.ShowModule()
-
- Db.Close()
--
2.16.2.windows.1
next prev parent reply other threads:[~2018-04-08 8:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-04 15:01 [PATCH v1 0/2] BaseTools: remove files not needed Jaben Carsey
2018-04-04 15:01 ` [PATCH v1 1/2] BaseTools: copy a dictionary from InfClassObject to BuildReport Jaben Carsey
2018-04-10 6:32 ` Zhu, Yonghong
2018-04-04 15:01 ` [PATCH v1 2/2] BaseTools: Remove unneeded files Jaben Carsey
2018-04-08 8:16 ` Zhu, Yonghong [this message]
2018-04-09 21:11 ` Carsey, Jaben
2018-04-10 0:35 ` Zhu, Yonghong
2018-04-10 6:39 ` Zhu, Yonghong
2018-04-10 14:26 ` Carsey, Jaben
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B9726D6DCCFB8B4CA276A9169B02216D51FDA8D2@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox