From: "Zhu, Yonghong" <yonghong.zhu@intel.com>
To: "Carsey, Jaben" <jaben.carsey@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Gao, Liming" <liming.gao@intel.com>,
"Zhu, Yonghong" <yonghong.zhu@intel.com>
Subject: Re: [PATCH v1 2/2] BaseTools: Remove unneeded files
Date: Tue, 10 Apr 2018 06:39:21 +0000 [thread overview]
Message-ID: <B9726D6DCCFB8B4CA276A9169B02216D51FDCA14@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: CB6E33457884FA40993F35157061515CA3CBC69A@FMSMSX103.amr.corp.intel.com
Hi Jaben,
I helped to update the Makefile, and pushed this patch. because I pushed the patch that remove the Dictionary.py file, but in InfClassObject.py, "from Dictionary import *" still exists, it cause build failure.
Since this 4 files are not used, remove it is fine.
Best Regards,
Zhu Yonghong
-----Original Message-----
From: Zhu, Yonghong
Sent: Tuesday, April 10, 2018 8:35 AM
To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong <yonghong.zhu@intel.com>
Subject: RE: [PATCH v1 2/2] BaseTools: Remove unneeded files
So please send out a V2 for 1) issue fixed. I will review and apply Feng's patch for 2).
Best Regards,
Zhu Yonghong
-----Original Message-----
From: Carsey, Jaben
Sent: Tuesday, April 10, 2018 5:12 AM
To: Zhu, Yonghong <yonghong.zhu@intel.com>; edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>
Subject: RE: [PATCH v1 2/2] BaseTools: Remove unneeded files
1) Yes.
2) I didn't do this since EdkIIWorkspaceBuild is already pending removal in a separate patch from Feng.
Shall I send out a v2 with workspace fixed or with both?j I didn't want to conflict with Feng's patch.
-Jaben
> -----Original Message-----
> From: Zhu, Yonghong
> Sent: Sunday, April 08, 2018 1:17 AM
> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> <yonghong.zhu@intel.com>
> Subject: RE: [PATCH v1 2/2] BaseTools: Remove unneeded files
> Importance: High
>
> Hi Jaben,
>
> 1. the BaseTools/Source/Python/Makefile also need remove those .py files,
> otherwise it would cause freeze binary failure.
> 2. EdkIIWorkspaceBuild.py use some function in those .py files, but in fact
> the EdkIIWorkspaceBuild.py also can be removed, so how about in your V2
> patch also remove this file ?
>
> Best Regards,
> Zhu Yonghong
>
>
> -----Original Message-----
> From: Carsey, Jaben
> Sent: Wednesday, April 04, 2018 11:02 PM
> To: edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> <yonghong.zhu@intel.com>
> Subject: [PATCH v1 2/2] BaseTools: Remove unneeded files
>
> These files are not used by any tool:
> BaseTools/Source/Python/Common/DecClassObject.py
> BaseTools/Source/Python/Common/DscClassObject.py
> BaseTools/Source/Python/Common/FdfClassObject.py
> BaseTools/Source/Python/Common/InfClassObject.py
>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> ---
> BaseTools/Source/Python/Common/DecClassObject.py | 553 --------
> BaseTools/Source/Python/Common/DscClassObject.py | 1434 -----------------
> ---
> BaseTools/Source/Python/Common/FdfClassObject.py | 106 --
> BaseTools/Source/Python/Common/InfClassObject.py | 1105 ---------------
> 4 files changed, 3198 deletions(-)
>
> diff --git a/BaseTools/Source/Python/Common/DecClassObject.py
> b/BaseTools/Source/Python/Common/DecClassObject.py
> deleted file mode 100644
> index ed998d3b677d..000000000000
> --- a/BaseTools/Source/Python/Common/DecClassObject.py
> +++ /dev/null
> @@ -1,553 +0,0 @@
> -## @file
> -# This file is used to define each component of DEC file
> -#
> -# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the
> BSD License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> -##
> -# Import Modules
> -#
> -import Common.LongFilePathOs as os
> -from String import *
> -from DataType import *
> -from Identification import *
> -from Dictionary import *
> -from CommonDataClass.PackageClass import *
> -from CommonDataClass.CommonClass import PcdClass
> -from BuildToolError import *
> -from Table.TableDec import TableDec
> -import Database
> -from Parsing import *
> -import GlobalData
> -from Common.LongFilePathSupport import OpenLongFilePath as open
> -
> -#
> -# Global variable
> -#
> -Section = {TAB_UNKNOWN.upper() : MODEL_UNKNOWN,
> - TAB_DEC_DEFINES.upper() : MODEL_META_DATA_HEADER,
> - TAB_INCLUDES.upper() : MODEL_EFI_INCLUDE,
> - TAB_LIBRARY_CLASSES.upper() : MODEL_EFI_LIBRARY_CLASS,
> - TAB_COMPONENTS.upper() : MODEL_META_DATA_COMPONENT,
> - TAB_GUIDS.upper() : MODEL_EFI_GUID,
> - TAB_PROTOCOLS.upper() : MODEL_EFI_PROTOCOL,
> - TAB_PPIS.upper() : MODEL_EFI_PPI,
> - TAB_PCDS_FIXED_AT_BUILD_NULL.upper() :
> MODEL_PCD_FIXED_AT_BUILD,
> - TAB_PCDS_PATCHABLE_IN_MODULE_NULL.upper() :
> MODEL_PCD_PATCHABLE_IN_MODULE,
> - TAB_PCDS_FEATURE_FLAG_NULL.upper() :
> MODEL_PCD_FEATURE_FLAG,
> - TAB_PCDS_DYNAMIC_EX_NULL.upper() : MODEL_PCD_DYNAMIC_EX,
> - TAB_PCDS_DYNAMIC_NULL.upper() : MODEL_PCD_DYNAMIC,
> - TAB_USER_EXTENSIONS.upper() :
> MODEL_META_DATA_USER_EXTENSION
> - }
> -
> -
> -## Dec
> -#
> -# This class defined the structure used in Dec object
> -#
> -# @param Filename: Input value for Filename of Dec file, default is
> None
> -# @param IsMergeAllArches: Input value for IsMergeAllArches
> -# True is to merge all arches
> -# Fales is not to merge all arches
> -# default is False
> -# @param IsToPackage: Input value for IsToPackage
> -# True is to transfer to PackageObject automatically
> -# False is not to transfer to PackageObject automatically
> -# default is False
> -# @param WorkspaceDir: Input value for current workspace directory,
> default is None
> -#
> -# @var Identification: To store value for Identification, it is a structure as
> Identification
> -# @var Defines: To store value for Defines, it is a structure as
> DecDefines
> -# @var UserExtensions: To store value for UserExtensions
> -# @var Package: To store value for Package, it is a structure as
> PackageClass
> -# @var WorkspaceDir: To store value for WorkspaceDir
> -# @var Contents: To store value for Contents, it is a structure as
> DecContents
> -# @var KeyList: To store value for KeyList, a list for all Keys used in Dec
> -#
> -class Dec(object):
> - def __init__(self, Filename=None, IsToDatabase=False,
> IsToPackage=False, WorkspaceDir=None, Database=None,
> SupArchList=DataType.ARCH_LIST):
> - self.Identification = Identification()
> - self.Package = PackageClass()
> - self.UserExtensions = ''
> - self.WorkspaceDir = WorkspaceDir
> - self.SupArchList = SupArchList
> - self.IsToDatabase = IsToDatabase
> -
> - self.Cur = Database.Cur
> - self.TblFile = Database.TblFile
> - self.TblDec = Database.TblDec
> - self.FileID = -1
> -
> - self.KeyList = [
> - TAB_INCLUDES, TAB_GUIDS, TAB_PROTOCOLS, TAB_PPIS,
> TAB_LIBRARY_CLASSES, \
> - TAB_PCDS_FIXED_AT_BUILD_NULL,
> TAB_PCDS_PATCHABLE_IN_MODULE_NULL,
> TAB_PCDS_FEATURE_FLAG_NULL, \
> - TAB_PCDS_DYNAMIC_NULL, TAB_PCDS_DYNAMIC_EX_NULL,
> TAB_DEC_DEFINES
> - ]
> - #
> - # Upper all KEYs to ignore case sensitive when parsing
> - #
> - self.KeyList = map(lambda c: c.upper(), self.KeyList)
> -
> - #
> - # Init RecordSet
> - #
> - self.RecordSet = {}
> - for Key in self.KeyList:
> - self.RecordSet[Section[Key]] = []
> -
> - #
> - # Load Dec file if filename is not None
> - #
> - if Filename is not None:
> - self.LoadDecFile(Filename)
> -
> - #
> - # Transfer to Package Object if IsToPackage is True
> - #
> - if IsToPackage:
> - self.DecToPackage()
> -
> - ## Load Dec file
> - #
> - # Load the file if it exists
> - #
> - # @param Filename: Input value for filename of Dec file
> - #
> - def LoadDecFile(self, Filename):
> - #
> - # Insert a record for file
> - #
> - Filename = NormPath(Filename)
> - self.Identification.FileFullPath = Filename
> - (self.Identification.FileRelativePath, self.Identification.FileName) =
> os.path.split(Filename)
> - self.FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_DEC)
> -
> - #
> - # Init DecTable
> - #
> - #self.TblDec.Table = "Dec%s" % self.FileID
> - #self.TblDec.Create()
> -
> - #
> - # Init common datas
> - #
> - IfDefList, SectionItemList, CurrentSection, ArchList, ThirdList,
> IncludeFiles = \
> - [], [], TAB_UNKNOWN, [], [], []
> - LineNo = 0
> -
> - #
> - # Parse file content
> - #
> - IsFindBlockComment = False
> - ReservedLine = ''
> - for Line in open(Filename, 'r'):
> - LineNo = LineNo + 1
> - #
> - # Remove comment block
> - #
> - if Line.find(TAB_COMMENT_EDK_START) > -1:
> - ReservedLine = GetSplitList(Line, TAB_COMMENT_EDK_START, 1)[0]
> - IsFindBlockComment = True
> - if Line.find(TAB_COMMENT_EDK_END) > -1:
> - Line = ReservedLine + GetSplitList(Line, TAB_COMMENT_EDK_END,
> 1)[1]
> - ReservedLine = ''
> - IsFindBlockComment = False
> - if IsFindBlockComment:
> - continue
> -
> - #
> - # Remove comments at tail and remove spaces again
> - #
> - Line = CleanString(Line)
> - if Line == '':
> - continue
> -
> - #
> - # Find a new section tab
> - # First insert previous section items
> - # And then parse the content of the new section
> - #
> - if Line.startswith(TAB_SECTION_START) and
> Line.endswith(TAB_SECTION_END):
> - #
> - # Insert items data of previous section
> - #
> - Model = Section[CurrentSection.upper()]
> - InsertSectionItemsIntoDatabase(self.TblDec, self.FileID, Filename,
> Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList,
> self.RecordSet)
> -
> - #
> - # Parse the new section
> - #
> - SectionItemList = []
> - ArchList = []
> - ThirdList = []
> -
> - CurrentSection = ''
> - LineList = GetSplitValueList(Line[len(TAB_SECTION_START):len(Line)
> - len(TAB_SECTION_END)], TAB_COMMA_SPLIT)
> - for Item in LineList:
> - ItemList = GetSplitValueList(Item, TAB_SPLIT)
> - if CurrentSection == '':
> - CurrentSection = ItemList[0]
> - else:
> - if CurrentSection != ItemList[0]:
> - EdkLogger.error("Parser", PARSER_ERROR, "Different section
> names '%s' and '%s' are found in one section definition, this is not allowed."
> % (CurrentSection, ItemList[0]), File=Filename, Line=LineNo,
> RaiseError=EdkLogger.IsRaiseError)
> - if CurrentSection.upper() not in self.KeyList:
> - RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
> - ItemList.append('')
> - ItemList.append('')
> - if len(ItemList) > 5:
> - RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
> - else:
> - if ItemList[1] != '' and ItemList[1].upper() not in
> ARCH_LIST_FULL:
> - EdkLogger.error("Parser", PARSER_ERROR, "Invalid Arch
> definition '%s' found" % ItemList[1], File=Filename, Line=LineNo,
> RaiseError=EdkLogger.IsRaiseError)
> - ArchList.append(ItemList[1].upper())
> - ThirdList.append(ItemList[2])
> -
> - continue
> -
> - #
> - # Not in any defined section
> - #
> - if CurrentSection == TAB_UNKNOWN:
> - ErrorMsg = "%s is not in any defined section" % Line
> - EdkLogger.error("Parser", PARSER_ERROR, ErrorMsg, File=Filename,
> Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
> -
> - #
> - # Add a section item
> - #
> - SectionItemList.append([Line, LineNo])
> - # End of parse
> - #End of For
> -
> - #
> - # Insert items data of last section
> - #
> - Model = Section[CurrentSection.upper()]
> - InsertSectionItemsIntoDatabase(self.TblDec, self.FileID, Filename,
> Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList,
> self.RecordSet)
> -
> - #
> - # Replace all DEFINE macros with its actual values
> - #
> - ParseDefineMacro2(self.TblDec, self.RecordSet,
> GlobalData.gGlobalDefines)
> -
> - ## Transfer to Package Object
> - #
> - # Transfer all contents of a Dec file to a standard Package Object
> - #
> - def DecToPackage(self):
> - #
> - # Init global information for the file
> - #
> - ContainerFile = self.Identification.FileFullPath
> -
> - #
> - # Generate Package Header
> - #
> - self.GenPackageHeader(ContainerFile)
> -
> - #
> - # Generate Includes
> - #
> - self.GenIncludes(ContainerFile)
> -
> - #
> - # Generate Guids
> - #
> - self.GenGuidProtocolPpis(DataType.TAB_GUIDS, ContainerFile)
> -
> - #
> - # Generate Protocols
> - #
> - self.GenGuidProtocolPpis(DataType.TAB_PROTOCOLS, ContainerFile)
> -
> - #
> - # Generate Ppis
> - #
> - self.GenGuidProtocolPpis(DataType.TAB_PPIS, ContainerFile)
> -
> - #
> - # Generate LibraryClasses
> - #
> - self.GenLibraryClasses(ContainerFile)
> -
> - #
> - # Generate Pcds
> - #
> - self.GenPcds(ContainerFile)
> -
> - ## Get Package Header
> - #
> - # Gen Package Header of Dec as <Key> = <Value>
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenPackageHeader(self, ContainerFile):
> - EdkLogger.debug(2, "Generate PackageHeader ...")
> - #
> - # Update all defines item in database
> - #
> - RecordSet = self.RecordSet[MODEL_META_DATA_HEADER]
> - for Record in RecordSet:
> - ValueList = GetSplitValueList(Record[0], TAB_EQUAL_SPLIT)
> - if len(ValueList) != 2:
> - RaiseParserError(Record[0], 'Defines', ContainerFile, '<Key> =
> <Value>', Record[2])
> - ID, Value1, Value2, Arch, LineNo = Record[3], ValueList[0],
> ValueList[1], Record[1], Record[2]
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
> - where ID = %s""" % (self.TblDec.Table,
> ConvertToSqlString2(Value1), ConvertToSqlString2(Value2), ID)
> - self.TblDec.Exec(SqlCommand)
> -
> - #
> - # Get detailed information
> - #
> - for Arch in self.SupArchList:
> - PackageHeader = PackageHeaderClass()
> -
> - PackageHeader.Name = QueryDefinesItem(self.TblDec,
> TAB_DEC_DEFINES_PACKAGE_NAME, Arch, self.FileID)[0]
> - PackageHeader.Guid = QueryDefinesItem(self.TblDec,
> TAB_DEC_DEFINES_PACKAGE_GUID, Arch, self.FileID)[0]
> - PackageHeader.Version = QueryDefinesItem(self.TblDec,
> TAB_DEC_DEFINES_PACKAGE_VERSION, Arch, self.FileID)[0]
> - PackageHeader.FileName = self.Identification.FileName
> - PackageHeader.FullPath = self.Identification.FileFullPath
> - PackageHeader.DecSpecification = QueryDefinesItem(self.TblDec,
> TAB_DEC_DEFINES_DEC_SPECIFICATION, Arch, self.FileID)[0]
> -
> - self.Package.Header[Arch] = PackageHeader
> -
> - ## GenIncludes
> - #
> - # Gen Includes of Dec
> - #
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenIncludes(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_INCLUDES)
> - Includes = {}
> - #
> - # Get all Includes
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_INCLUDE]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - MergeArches(Includes, Record[0], Arch)
> -
> - for Key in Includes.keys():
> - Include = IncludeClass()
> - Include.FilePath = NormPath(Key)
> - Include.SupArchList = Includes[Key]
> - self.Package.Includes.append(Include)
> -
> - ## GenPpis
> - #
> - # Gen Ppis of Dec
> - # <CName>=<GuidValue>
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenGuidProtocolPpis(self, Type, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % Type)
> - Lists = {}
> - #
> - # Get all Items
> - #
> - RecordSet = self.RecordSet[Section[Type.upper()]]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (Name, Value) = GetGuidsProtocolsPpisOfDec(Record[0], Type,
> ContainerFile, Record[2])
> - MergeArches(Lists, (Name, Value), Arch)
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
> - where ID = %s""" % (self.TblDec.Table,
> ConvertToSqlString2(Name), ConvertToSqlString2(Value), Record[3])
> - self.TblDec.Exec(SqlCommand)
> -
> - ListMember = None
> - if Type == TAB_GUIDS:
> - ListMember = self.Package.GuidDeclarations
> - elif Type == TAB_PROTOCOLS:
> - ListMember = self.Package.ProtocolDeclarations
> - elif Type == TAB_PPIS:
> - ListMember = self.Package.PpiDeclarations
> -
> - for Key in Lists.keys():
> - ListClass = GuidProtocolPpiCommonClass()
> - ListClass.CName = Key[0]
> - ListClass.Guid = Key[1]
> - ListClass.SupArchList = Lists[Key]
> - ListMember.append(ListClass)
> -
> -
> - ## GenLibraryClasses
> - #
> - # Gen LibraryClasses of Dec
> - # <CName>=<GuidValue>
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenLibraryClasses(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARY_CLASSES)
> - LibraryClasses = {}
> - #
> - # Get all Guids
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_LIBRARY_CLASS]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - List = GetSplitValueList(Record[0], DataType.TAB_VALUE_SPLIT)
> - if len(List) != 2:
> - RaiseParserError(Record[0], 'LibraryClasses', ContainerFile,
> '<LibraryClassName>|<LibraryClassInstanceFilename>', Record[2])
> - else:
> - CheckFileExist(self.Identification.FileRelativePath, List[1],
> ContainerFile, 'LibraryClasses', Record[0])
> - MergeArches(LibraryClasses, (List[0], List[1]), Arch)
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s',
> Value3 = '%s'
> - where ID = %s""" % (self.TblDec.Table,
> ConvertToSqlString2(List[0]), ConvertToSqlString2(List[1]),
> SUP_MODULE_LIST_STRING, Record[3])
> - self.TblDec.Exec(SqlCommand)
> -
> -
> - for Key in LibraryClasses.keys():
> - LibraryClass = LibraryClassClass()
> - LibraryClass.LibraryClass = Key[0]
> - LibraryClass.RecommendedInstance = NormPath(Key[1])
> - LibraryClass.SupModuleList = SUP_MODULE_LIST
> - LibraryClass.SupArchList = LibraryClasses[Key]
> - self.Package.LibraryClassDeclarations.append(LibraryClass)
> -
> - ## GenPcds
> - #
> - # Gen Pcds of Dec
> - # <TokenSpcCName>.<TokenCName>|<Value>|<DatumType>|<Token>
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenPcds(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_PCDS)
> - Pcds = {}
> - PcdToken = {}
> - #
> - # Get all Guids
> - #
> - RecordSet1 = self.RecordSet[MODEL_PCD_FIXED_AT_BUILD]
> - RecordSet2 = self.RecordSet[MODEL_PCD_PATCHABLE_IN_MODULE]
> - RecordSet3 = self.RecordSet[MODEL_PCD_FEATURE_FLAG]
> - RecordSet4 = self.RecordSet[MODEL_PCD_DYNAMIC_EX]
> - RecordSet5 = self.RecordSet[MODEL_PCD_DYNAMIC]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet1:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, DatumType, Token,
> Type) = GetPcdOfDec(Record[0], TAB_PCDS_FIXED_AT_BUILD,
> ContainerFile, Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> DatumType, Token, Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet2:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, DatumType, Token,
> Type) = GetPcdOfDec(Record[0], TAB_PCDS_PATCHABLE_IN_MODULE,
> ContainerFile, Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> DatumType, Token, Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet3:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, DatumType, Token,
> Type) = GetPcdOfDec(Record[0], TAB_PCDS_FEATURE_FLAG, ContainerFile,
> Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> DatumType, Token, Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet4:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, DatumType, Token,
> Type) = GetPcdOfDec(Record[0], TAB_PCDS_DYNAMIC_EX, ContainerFile,
> Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> DatumType, Token, Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet5:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, DatumType, Token,
> Type) = GetPcdOfDec(Record[0], TAB_PCDS_DYNAMIC, ContainerFile,
> Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> DatumType, Token, Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - #
> - # Update to database
> - #
> - if self.IsToDatabase:
> - for Key in PcdToken.keys():
> - SqlCommand = """update %s set Value2 = '%s' where ID = %s""" %
> (self.TblDec.Table, ".".join((PcdToken[Key][0], PcdToken[Key][1])), Key)
> - self.TblDec.Exec(SqlCommand)
> -
> - for Key in Pcds.keys():
> - Pcd = PcdClass()
> - Pcd.CName = Key[1]
> - Pcd.Token = Key[4]
> - Pcd.TokenSpaceGuidCName = Key[0]
> - Pcd.DatumType = Key[3]
> - Pcd.DefaultValue = Key[2]
> - Pcd.ItemType = Key[5]
> - Pcd.SupArchList = Pcds[Key]
> - self.Package.PcdDeclarations.append(Pcd)
> -
> - ## Show detailed information of Package
> - #
> - # Print all members and their values of Package class
> - #
> - def ShowPackage(self):
> - M = self.Package
> - for Arch in M.Header.keys():
> - print '\nArch =', Arch
> - print 'Filename =', M.Header[Arch].FileName
> - print 'FullPath =', M.Header[Arch].FullPath
> - print 'BaseName =', M.Header[Arch].Name
> - print 'Guid =', M.Header[Arch].Guid
> - print 'Version =', M.Header[Arch].Version
> - print 'DecSpecification =', M.Header[Arch].DecSpecification
> - print '\nIncludes =', M.Includes
> - for Item in M.Includes:
> - print Item.FilePath, Item.SupArchList
> - print '\nGuids =', M.GuidDeclarations
> - for Item in M.GuidDeclarations:
> - print Item.CName, Item.Guid, Item.SupArchList
> - print '\nProtocols =', M.ProtocolDeclarations
> - for Item in M.ProtocolDeclarations:
> - print Item.CName, Item.Guid, Item.SupArchList
> - print '\nPpis =', M.PpiDeclarations
> - for Item in M.PpiDeclarations:
> - print Item.CName, Item.Guid, Item.SupArchList
> - print '\nLibraryClasses =', M.LibraryClassDeclarations
> - for Item in M.LibraryClassDeclarations:
> - print Item.LibraryClass, Item.RecommendedInstance,
> Item.SupModuleList, Item.SupArchList
> - print '\nPcds =', M.PcdDeclarations
> - for Item in M.PcdDeclarations:
> - print 'CName=', Item.CName, 'TokenSpaceGuidCName=',
> Item.TokenSpaceGuidCName, 'DefaultValue=', Item.DefaultValue,
> 'ItemType=', Item.ItemType, 'Token=', Item.Token, 'DatumType=',
> Item.DatumType, Item.SupArchList
> -
> -##
> -#
> -# This acts like the main() function for the script, unless it is 'import'ed into
> another
> -# script.
> -#
> -if __name__ == '__main__':
> - EdkLogger.Initialize()
> - EdkLogger.SetLevel(EdkLogger.DEBUG_0)
> -
> - W = os.getenv('WORKSPACE')
> - F = os.path.join(W, 'Nt32Pkg/Nt32Pkg.dec')
> -
> - Db = Database.Database('Dec.db')
> - Db.InitDatabase()
> -
> - P = Dec(os.path.normpath(F), True, True, W, Db)
> - P.ShowPackage()
> -
> - Db.Close()
> diff --git a/BaseTools/Source/Python/Common/DscClassObject.py
> b/BaseTools/Source/Python/Common/DscClassObject.py
> deleted file mode 100644
> index da3101ae0fe9..000000000000
> --- a/BaseTools/Source/Python/Common/DscClassObject.py
> +++ /dev/null
> @@ -1,1434 +0,0 @@
> -## @file
> -# This file is used to define each component of DSC file
> -#
> -# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the
> BSD License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> -##
> -# Import Modules
> -#
> -import Common.LongFilePathOs as os
> -import EdkLogger as EdkLogger
> -import Database
> -from String import *
> -from Parsing import *
> -from DataType import *
> -from Identification import *
> -from Dictionary import *
> -from CommonDataClass.PlatformClass import *
> -from CommonDataClass.CommonClass import SkuInfoClass
> -from BuildToolError import *
> -from Misc import sdict
> -import GlobalData
> -from Table.TableDsc import TableDsc
> -from Common.LongFilePathSupport import OpenLongFilePath as open
> -
> -#
> -# Global variable
> -#
> -Section = {TAB_UNKNOWN.upper() : MODEL_UNKNOWN,
> - TAB_DSC_DEFINES.upper() : MODEL_META_DATA_HEADER,
> - TAB_BUILD_OPTIONS.upper() : MODEL_META_DATA_BUILD_OPTION,
> - TAB_SKUIDS.upper() : MODEL_EFI_SKU_ID,
> - TAB_LIBRARIES.upper() : MODEL_EFI_LIBRARY_INSTANCE,
> - TAB_LIBRARY_CLASSES.upper() : MODEL_EFI_LIBRARY_CLASS,
> - TAB_PCDS_FIXED_AT_BUILD_NULL.upper() :
> MODEL_PCD_FIXED_AT_BUILD,
> - TAB_PCDS_PATCHABLE_IN_MODULE_NULL.upper() :
> MODEL_PCD_PATCHABLE_IN_MODULE,
> - TAB_PCDS_FEATURE_FLAG_NULL.upper() :
> MODEL_PCD_FEATURE_FLAG,
> - TAB_PCDS_DYNAMIC_EX_NULL.upper() : MODEL_PCD_DYNAMIC_EX,
> - TAB_PCDS_DYNAMIC_EX_DEFAULT_NULL.upper() :
> MODEL_PCD_DYNAMIC_EX_DEFAULT,
> - TAB_PCDS_DYNAMIC_EX_VPD_NULL.upper() :
> MODEL_PCD_DYNAMIC_EX_VPD,
> - TAB_PCDS_DYNAMIC_EX_HII_NULL.upper() :
> MODEL_PCD_DYNAMIC_EX_HII,
> - TAB_PCDS_DYNAMIC_NULL.upper() : MODEL_PCD_DYNAMIC,
> - TAB_PCDS_DYNAMIC_DEFAULT_NULL.upper() :
> MODEL_PCD_DYNAMIC_DEFAULT,
> - TAB_PCDS_DYNAMIC_VPD_NULL.upper() :
> MODEL_PCD_DYNAMIC_VPD,
> - TAB_PCDS_DYNAMIC_HII_NULL.upper() :
> MODEL_PCD_DYNAMIC_HII,
> - TAB_COMPONENTS.upper() : MODEL_META_DATA_COMPONENT,
> - TAB_USER_EXTENSIONS.upper() :
> MODEL_META_DATA_USER_EXTENSION
> - }
> -
> -## Dsc
> -#
> -# This class defined the structure used in Dsc object
> -#
> -# @param Ffilename: Input value for Ffilename of Inf file, default is
> None
> -# @param IsMergeAllArches: Input value for IsMergeAllArches
> -# True is to merge all arches
> -# Fales is not to merge all arches
> -# default is False
> -# @param IsToPlatform: Input value for IsToPlatform
> -# True is to transfer to ModuleObject automatically
> -# False is not to transfer to ModuleObject automatically
> -# default is False
> -# @param WorkspaceDir: Input value for current workspace directory,
> default is None
> -#
> -# @var _NullClassIndex: To store value for _NullClassIndex, default is 0
> -# @var Identification: To store value for Identification, it is a structure as
> Identification
> -# @var Defines: To store value for Defines, it is a structure as
> DscDefines
> -# @var Contents: To store value for Contents, it is a structure as
> DscContents
> -# @var UserExtensions: To store value for UserExtensions
> -# @var Platform: To store value for Platform, it is a structure as
> PlatformClass
> -# @var WorkspaceDir: To store value for WorkspaceDir
> -# @var KeyList: To store value for KeyList, a list for all Keys used in Dec
> -#
> -class Dsc(object):
> - _NullClassIndex = 0
> -
> - def __init__(self, Filename=None, IsToDatabase=False,
> IsToPlatform=False, WorkspaceDir=None, Database=None):
> - self.Identification = Identification()
> - self.Platform = PlatformClass()
> - self.UserExtensions = ''
> - self.WorkspaceDir = WorkspaceDir
> - self.IsToDatabase = IsToDatabase
> - if Database:
> - self.Cur = Database.Cur
> - self.TblFile = Database.TblFile
> - self.TblDsc = Database.TblDsc
> -
> - self.KeyList = [
> - TAB_SKUIDS, TAB_LIBRARIES, TAB_LIBRARY_CLASSES,
> TAB_BUILD_OPTIONS, TAB_PCDS_FIXED_AT_BUILD_NULL, \
> - TAB_PCDS_PATCHABLE_IN_MODULE_NULL,
> TAB_PCDS_FEATURE_FLAG_NULL, \
> - TAB_PCDS_DYNAMIC_DEFAULT_NULL,
> TAB_PCDS_DYNAMIC_HII_NULL, TAB_PCDS_DYNAMIC_VPD_NULL, \
> - TAB_PCDS_DYNAMIC_EX_DEFAULT_NULL,
> TAB_PCDS_DYNAMIC_EX_HII_NULL, TAB_PCDS_DYNAMIC_EX_VPD_NULL, \
> - TAB_COMPONENTS, TAB_DSC_DEFINES
> - ]
> -
> - self.PcdToken = {}
> -
> - #
> - # Upper all KEYs to ignore case sensitive when parsing
> - #
> - self.KeyList = map(lambda c: c.upper(), self.KeyList)
> -
> - #
> - # Init RecordSet
> - #
> -# self.RecordSet = {}
> -# for Key in self.KeyList:
> -# self.RecordSet[Section[Key]] = []
> -
> - #
> - # Load Dsc file if filename is not None
> - #
> - if Filename is not None:
> - self.LoadDscFile(Filename)
> -
> - #
> - # Transfer to Platform Object if IsToPlatform is True
> - #
> - if IsToPlatform:
> - self.DscToPlatform()
> -
> - ## Transfer to Platform Object
> - #
> - # Transfer all contents of an Inf file to a standard Module Object
> - #
> - def DscToPlatform(self):
> - #
> - # Init global information for the file
> - #
> - ContainerFile = self.Identification.FileFullPath
> -
> - #
> - # Generate Platform Header
> - #
> - self.GenPlatformHeader(ContainerFile)
> -
> - #
> - # Generate BuildOptions
> - #
> - self.GenBuildOptions(ContainerFile)
> -
> - #
> - # Generate SkuInfos
> - #
> - self.GenSkuInfos(ContainerFile)
> -
> - #
> - # Generate Libraries
> - #
> - self.GenLibraries(ContainerFile)
> -
> - #
> - # Generate LibraryClasses
> - #
> - self.GenLibraryClasses(ContainerFile)
> -
> - #
> - # Generate Pcds
> - #
> - self.GenPcds(DataType.TAB_PCDS_FIXED_AT_BUILD, ContainerFile)
> - self.GenPcds(DataType.TAB_PCDS_PATCHABLE_IN_MODULE,
> ContainerFile)
> - self.GenFeatureFlagPcds(DataType.TAB_PCDS_FEATURE_FLAG,
> ContainerFile)
> -
> self.GenDynamicDefaultPcds(DataType.TAB_PCDS_DYNAMIC_DEFAULT,
> ContainerFile)
> -
> self.GenDynamicDefaultPcds(DataType.TAB_PCDS_DYNAMIC_EX_DEFAULT,
> ContainerFile)
> - self.GenDynamicHiiPcds(DataType.TAB_PCDS_DYNAMIC_HII,
> ContainerFile)
> - self.GenDynamicHiiPcds(DataType.TAB_PCDS_DYNAMIC_EX_HII,
> ContainerFile)
> - self.GenDynamicVpdPcds(DataType.TAB_PCDS_DYNAMIC_VPD,
> ContainerFile)
> - self.GenDynamicVpdPcds(DataType.TAB_PCDS_DYNAMIC_EX_VPD,
> ContainerFile)
> -
> - #
> - # Generate Components
> - #
> - self.GenComponents(ContainerFile)
> -
> - #
> - # Update to database
> - #
> - if self.IsToDatabase:
> - for Key in self.PcdToken.keys():
> - SqlCommand = """update %s set Value2 = '%s' where ID = %s""" %
> (self.TblDsc.Table, ".".join((self.PcdToken[Key][0], self.PcdToken[Key][1])),
> Key)
> - self.TblDsc.Exec(SqlCommand)
> - #End of DscToPlatform
> -
> - ## Get Platform Header
> - #
> - # Gen Platform Header of Dsc as <Key> = <Value>
> - #
> - # @param ContainerFile: The Dsc file full path
> - #
> - def GenPlatformHeader(self, ContainerFile):
> - EdkLogger.debug(2, "Generate PlatformHeader ...")
> - #
> - # Update all defines item in database
> - #
> - SqlCommand = """select ID, Value1, Arch, StartLine from %s
> - where Model = %s
> - and BelongsToFile = %s
> - and Enabled > -1""" % (self.TblDsc.Table,
> MODEL_META_DATA_HEADER, self.FileID)
> - RecordSet = self.TblDsc.Exec(SqlCommand)
> - for Record in RecordSet:
> - ValueList = GetSplitValueList(Record[1], TAB_EQUAL_SPLIT)
> - if len(ValueList) != 2:
> - RaiseParserError(Record[1], 'Defines', ContainerFile, '<Key> =
> <Value>', Record[3])
> - ID, Value1, Value2, Arch = Record[0], ValueList[0], ValueList[1],
> Record[2]
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
> - where ID = %s""" % (self.TblDsc.Table,
> ConvertToSqlString2(Value1), ConvertToSqlString2(Value2), ID)
> - self.TblDsc.Exec(SqlCommand)
> -
> - #
> - # Get detailed information
> - #
> - for Arch in DataType.ARCH_LIST:
> - PlatformHeader = PlatformHeaderClass()
> -
> - PlatformHeader.Name = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_PLATFORM_NAME, Arch, self.FileID)[0]
> - PlatformHeader.Guid = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_PLATFORM_GUID, Arch, self.FileID)[0]
> - PlatformHeader.Version = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_PLATFORM_VERSION, Arch, self.FileID)[0]
> - PlatformHeader.FileName = self.Identification.FileName
> - PlatformHeader.FullPath = self.Identification.FileFullPath
> - PlatformHeader.DscSpecification = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_DSC_SPECIFICATION, Arch, self.FileID)[0]
> -
> - PlatformHeader.SkuIdName = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_SKUID_IDENTIFIER, Arch, self.FileID)
> - PlatformHeader.SupArchList = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_SUPPORTED_ARCHITECTURES, Arch, self.FileID)
> - PlatformHeader.BuildTargets = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_BUILD_TARGETS, Arch, self.FileID)
> - PlatformHeader.OutputDirectory =
> NormPath(QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_OUTPUT_DIRECTORY, Arch, self.FileID)[0])
> - PlatformHeader.BuildNumber = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_BUILD_NUMBER, Arch, self.FileID)[0]
> - PlatformHeader.MakefileName = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_MAKEFILE_NAME, Arch, self.FileID)[0]
> -
> - PlatformHeader.BsBaseAddress = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_BS_BASE_ADDRESS, Arch, self.FileID)[0]
> - PlatformHeader.RtBaseAddress = QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_RT_BASE_ADDRESS, Arch, self.FileID)[0]
> -
> - self.Platform.Header[Arch] = PlatformHeader
> - Fdf = PlatformFlashDefinitionFileClass()
> - Fdf.FilePath = NormPath(QueryDefinesItem(self.TblDsc,
> TAB_DSC_DEFINES_FLASH_DEFINITION, Arch, self.FileID)[0])
> - self.Platform.FlashDefinitionFile = Fdf
> - Prebuild = BuildScriptClass()
> - Prebuild.FilePath = NormPath(QueryDefinesItem(self.TblDsc,
> TAB_DSC_PREBUILD, Arch, self.FileID)[0])
> - self.Platform.Prebuild = Prebuild
> - Postbuild = BuildScriptClass()
> - Postbuild.FilePath = NormPath(QueryDefinesItem(self.TblDsc,
> TAB_DSC_POSTBUILD, Arch, self.FileID)[0])
> - self.Platform.Postbuild = Postbuild
> -
> - ## GenBuildOptions
> - #
> - # Gen BuildOptions of Dsc
> - # [<Family>:]<ToolFlag>=Flag
> - #
> - # @param ContainerFile: The Dsc file full path
> - #
> - def GenBuildOptions(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_BUILD_OPTIONS)
> - BuildOptions = {}
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, MODEL_META_DATA_BUILD_OPTION,
> self.FileID)
> -
> - #
> - # Get all BuildOptions
> - #
> - RecordSet = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_BUILD_OPTION, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, TAB_BUILD_OPTIONS, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - (Family, ToolChain, Flag) = GetBuildOption(NewItem, Filename,
> -1)
> - MergeArches(BuildOptions, (Family, ToolChain, Flag), Arch)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - (Family, ToolChain, Flag) = GetBuildOption(Record[0],
> ContainerFile, Record[2])
> - MergeArches(BuildOptions, (Family, ToolChain, Flag), Arch)
> - #
> - # Update to Database
> - #
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s',
> Value3 = '%s'
> - where ID = %s""" % (self.TblDsc.Table,
> ConvertToSqlString2(Family), ConvertToSqlString2(ToolChain),
> ConvertToSqlString2(Flag), Record[3])
> - self.TblDsc.Exec(SqlCommand)
> -
> - for Key in BuildOptions.keys():
> - BuildOption = BuildOptionClass(Key[0], Key[1], Key[2])
> - BuildOption.SupArchList = BuildOptions[Key]
> - self.Platform.BuildOptions.BuildOptionList.append(BuildOption)
> -
> - ## GenSkuInfos
> - #
> - # Gen SkuInfos of Dsc
> - # <Integer>|<UiName>
> - #
> - # @param ContainerFile: The Dsc file full path
> - #
> - def GenSkuInfos(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_SKUIDS)
> - #
> - # SkuIds
> - # <Integer>|<UiName>
> - #
> - self.Platform.SkuInfos.SkuInfoList['DEFAULT'] = '0'
> -
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, MODEL_EFI_SKU_ID, self.FileID)
> -
> - #
> - # Get all SkuInfos
> - #
> - RecordSet = QueryDscItem(self.TblDsc, MODEL_EFI_SKU_ID, -1,
> self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, TAB_SKUIDS, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - List = GetSplitValueList(NewItem)
> - if len(List) != 2:
> - RaiseParserError(NewItem, TAB_SKUIDS, Filename,
> '<Integer>|<UiName>')
> - else:
> - self.Platform.SkuInfos.SkuInfoList[List[1]] = List[0]
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - List = GetSplitValueList(Record[0])
> - if len(List) != 2:
> - RaiseParserError(Record[0], TAB_SKUIDS, ContainerFile,
> '<Integer>|<UiName>')
> - else:
> - self.Platform.SkuInfos.SkuInfoList[List[1]] = List[0]
> - #
> - # Update to Database
> - #
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
> - where ID = %s""" % (self.TblDsc.Table,
> ConvertToSqlString2(List[0]), ConvertToSqlString2(List[1]), Record[3])
> - self.TblDsc.Exec(SqlCommand)
> -
> - ## GenLibraries
> - #
> - # Gen Libraries of Dsc
> - # <PathAndFilename>
> - #
> - # @param ContainerFile: The Dsc file full path
> - #
> - def GenLibraries(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARIES)
> - Libraries = {}
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, MODEL_EFI_LIBRARY_INSTANCE,
> self.FileID)
> -
> - #
> - # Get all Libraries
> - #
> - RecordSet = QueryDscItem(self.TblDsc,
> MODEL_EFI_LIBRARY_INSTANCE, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, TAB_LIBRARIES, '', IncludeFile[2])
> - if os.path.exists(Filename):
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - MergeArches(Libraries, NewItem, Arch)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - MergeArches(Libraries, Record[0], Arch)
> -
> - for Key in Libraries.keys():
> - Library = PlatformLibraryClass()
> - Library.FilePath = NormPath(Key)
> - Library.SupArchList = Libraries[Key]
> - self.Platform.Libraries.LibraryList.append(Library)
> -
> - ## GenLibraryClasses
> - #
> - # Get LibraryClasses of Dsc
> - # <LibraryClassKeyWord>|<LibraryInstance>
> - #
> - # @param ContainerFile: The Dsc file full path
> - #
> - def GenLibraryClasses(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARY_CLASSES)
> - LibraryClasses = {}
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, MODEL_EFI_LIBRARY_CLASS, self.FileID)
> -
> - #
> - # Get all LibraryClasses
> - #
> - RecordSet = QueryDscItem(self.TblDsc, MODEL_EFI_LIBRARY_CLASS, -1,
> self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, TAB_LIBRARY_CLASSES, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - MergeArches(LibraryClasses, GetLibraryClass([NewItem,
> IncludeFile[4]], Filename, self.WorkspaceDir, -1), Arch)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - (LibClassName, LibClassIns, SupModelList) =
> GetLibraryClass([Record[0], Record[4]], ContainerFile, self.WorkspaceDir,
> Record[2])
> - MergeArches(LibraryClasses, (LibClassName, LibClassIns,
> SupModelList), Arch)
> - #
> - # Update to Database
> - #
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s',
> Value3 = '%s'
> - where ID = %s""" % (self.TblDsc.Table,
> ConvertToSqlString2(LibClassName), ConvertToSqlString2(LibClassIns),
> ConvertToSqlString2(SupModelList), Record[3])
> - self.TblDsc.Exec(SqlCommand)
> -
> - for Key in LibraryClasses.keys():
> - Library = PlatformLibraryClass()
> - Library.Name = Key[0]
> - Library.FilePath = NormPath(Key[1])
> - Library.SupModuleList = GetSplitValueList(Key[2])
> - Library.SupArchList = LibraryClasses[Key]
> - self.Platform.LibraryClasses.LibraryList.append(Library)
> -
> - ## Gen Pcds
> - #
> - # Gen Pcd of Dsc as
> <PcdTokenSpaceGuidCName>.<TokenCName>|<Value>[|<Type>|<Maximu
> mDatumSize>]
> - #
> - # @param Type: The type of Pcd
> - # @param ContainerFile: The file which describes the pcd, used for error
> report
> - #
> - def GenPcds(self, Type='', ContainerFile=''):
> - Pcds = {}
> - if Type == DataType.TAB_PCDS_PATCHABLE_IN_MODULE:
> - Model = MODEL_PCD_PATCHABLE_IN_MODULE
> - elif Type == DataType.TAB_PCDS_FIXED_AT_BUILD:
> - Model = MODEL_PCD_FIXED_AT_BUILD
> - else:
> - pass
> - EdkLogger.debug(2, "Generate %s ..." % Type)
> -
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, Model, self.FileID)
> -
> - #
> - # Get all Pcds
> - #
> - RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, Type, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - (TokenName, TokenGuidCName, Value, DatumType,
> MaxDatumSize, Type) = GetPcd(NewItem, Type, Filename, -1)
> - MergeArches(Pcds, (TokenName, TokenGuidCName, Value,
> DatumType, MaxDatumSize, Type), Arch)
> - self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - (TokenName, TokenGuidCName, Value, DatumType,
> MaxDatumSize, Type) = GetPcd(Record[0], Type, ContainerFile, Record[2])
> - MergeArches(Pcds, (TokenName, TokenGuidCName, Value,
> DatumType, MaxDatumSize, Type), Arch)
> - self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> -
> - for Key in Pcds:
> - Pcd = PcdClass(Key[0], '', Key[1], Key[3], Key[4], Key[2], Key[5], [], {},
> [])
> - Pcd.SupArchList = Pcds[Key]
> - self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
> -
> - ## Gen FeatureFlagPcds
> - #
> - # Gen FeatureFlagPcds of Dsc file as
> <PcdTokenSpaceGuidCName>.<TokenCName>|TRUE/FALSE
> - #
> - # @param Type: The type of Pcd
> - # @param ContainerFile: The file which describes the pcd, used for error
> report
> - #
> - def GenFeatureFlagPcds(self, Type='', ContainerFile=''):
> - Pcds = {}
> - if Type == DataType.TAB_PCDS_FEATURE_FLAG:
> - Model = MODEL_PCD_FEATURE_FLAG
> - else:
> - pass
> - EdkLogger.debug(2, "Generate %s ..." % Type)
> -
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, Model, self.FileID)
> -
> - #
> - # Get all FeatureFlagPcds
> - #
> - RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, Type, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - (TokenName, TokenGuidCName, Value, Type) =
> GetFeatureFlagPcd(NewItem, Type, Filename, -1)
> - MergeArches(Pcds, (TokenName, TokenGuidCName, Value,
> Type), Arch)
> - self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - (TokenName, TokenGuidCName, Value, Type) =
> GetFeatureFlagPcd(Record[0], Type, ContainerFile, Record[2])
> - MergeArches(Pcds, (TokenName, TokenGuidCName, Value,
> Type), Arch)
> - self.PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> -
> - for Key in Pcds:
> - Pcd = PcdClass(Key[0], '', Key[1], '', '', Key[2], Key[3], [], {}, [])
> - Pcd.SupArchList = Pcds[Key]
> - self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
> -
> - ## Gen DynamicDefaultPcds
> - #
> - # Gen DynamicDefaultPcds of Dsc as
> <PcdTokenSpaceGuidCName>.<TokenCName>|<Value>[|<DatumTyp>[|<
> MaxDatumSize>]]
> - #
> - # @param Type: The type of Pcd
> - # @param ContainerFile: The file which describes the pcd, used for error
> report
> - #
> - def GenDynamicDefaultPcds(self, Type='', ContainerFile=''):
> - Pcds = {}
> - SkuInfoList = {}
> - if Type == DataType.TAB_PCDS_DYNAMIC_DEFAULT:
> - Model = MODEL_PCD_DYNAMIC_DEFAULT
> - elif Type == DataType.TAB_PCDS_DYNAMIC_EX_DEFAULT:
> - Model = MODEL_PCD_DYNAMIC_EX_DEFAULT
> - else:
> - pass
> - EdkLogger.debug(2, "Generate %s ..." % Type)
> -
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, Model, self.FileID)
> -
> - #
> - # Get all DynamicDefaultPcds
> - #
> - RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, Type, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - (K1, K2, K3, K4, K5, K6) = GetDynamicDefaultPcd(NewItem,
> Type, Filename, -1)
> - MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, IncludeFile[4]), Arch)
> - self.PcdToken[Record[3]] = (K2, K1)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - (K1, K2, K3, K4, K5, K6) = GetDynamicDefaultPcd(Record[0], Type,
> ContainerFile, Record[2])
> - MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, Record[4]), Arch)
> - self.PcdToken[Record[3]] = (K2, K1)
> -
> - for Key in Pcds:
> - (Status, SkuInfoList) = self.GenSkuInfoList(Key[6],
> self.Platform.SkuInfos.SkuInfoList, '', '', '', '', '', Key[2])
> - if Status == False:
> - ErrorMsg = "The SKUID '%s' used in section '%s' is not defined in
> section [SkuIds]" % (SkuInfoList, Type)
> - EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg,
> ContainerFile, RaiseError=EdkLogger.IsRaiseError)
> - Pcd = PcdClass(Key[0], '', Key[1], Key[3], Key[4], Key[2], Key[5], [],
> SkuInfoList, [])
> - Pcd.SupArchList = Pcds[Key]
> - self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
> -
> - ## Gen DynamicHiiPcds
> - #
> - # Gen DynamicHiiPcds of Dsc as
> <PcdTokenSpaceGuidCName>.<TokenCName>|<String>|<VariableGuidCNa
> me>|<VariableOffset>[|<DefaultValue>[|<MaximumDatumSize>]]
> - #
> - # @param Type: The type of Pcd
> - # @param ContainerFile: The file which describes the pcd, used for error
> report
> - #
> - def GenDynamicHiiPcds(self, Type='', ContainerFile=''):
> - Pcds = {}
> - SkuInfoList = {}
> - if Type == DataType.TAB_PCDS_DYNAMIC_HII:
> - Model = MODEL_PCD_DYNAMIC_HII
> - elif Type == DataType.TAB_PCDS_DYNAMIC_EX_HII:
> - Model = MODEL_PCD_DYNAMIC_EX_HII
> - else:
> - pass
> - EdkLogger.debug(2, "Generate %s ..." % Type)
> -
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, Model, self.FileID)
> -
> - #
> - # Get all DynamicHiiPcds
> - #
> - RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, Type, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - (K1, K2, K3, K4, K5, K6, K7, K8) = GetDynamicHiiPcd(NewItem,
> Type, Filename, -1)
> - MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, K7, K8,
> IncludeFile[4]), Arch)
> - self.PcdToken[Record[3]] = (K2, K1)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - (K1, K2, K3, K4, K5, K6, K7, K8) = GetDynamicHiiPcd(Record[0],
> Type, ContainerFile, Record[2])
> - MergeArches(Pcds, (K1, K2, K3, K4, K5, K6, K7, K8, Record[4]),
> Arch)
> - self.PcdToken[Record[3]] = (K2, K1)
> -
> - for Key in Pcds:
> - (Status, SkuInfoList) = self.GenSkuInfoList(Key[8],
> self.Platform.SkuInfos.SkuInfoList, Key[2], Key[3], Key[4], Key[5], '', '')
> - if Status == False:
> - ErrorMsg = "The SKUID '%s' used in section '%s' is not defined in
> section [SkuIds]" % (SkuInfoList, Type)
> - EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg,
> ContainerFile, RaiseError=EdkLogger.IsRaiseError)
> - Pcd = PcdClass(Key[0], '', Key[1], '', Key[6], Key[5], Key[7], [],
> SkuInfoList, [])
> - Pcd.SupArchList = Pcds[Key]
> - self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
> -
> - ## Gen DynamicVpdPcds
> - #
> - # Gen DynamicVpdPcds of Dsc as
> <PcdTokenSpaceGuidCName>.<TokenCName>|<VpdOffset>[|<MaximumD
> atumSize>]
> - #
> - # @param Type: The type of Pcd
> - # @param ContainerFile: The file which describes the pcd, used for error
> report
> - #
> - def GenDynamicVpdPcds(self, Type='', ContainerFile=''):
> - Pcds = {}
> - SkuInfoList = {}
> - if Type == DataType.TAB_PCDS_DYNAMIC_VPD:
> - Model = MODEL_PCD_DYNAMIC_VPD
> - elif Type == DataType.TAB_PCDS_DYNAMIC_EX_VPD:
> - Model = MODEL_PCD_DYNAMIC_EX_VPD
> - else:
> - pass
> - EdkLogger.debug(2, "Generate %s ..." % Type)
> -
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, Model, self.FileID)
> -
> - #
> - # Get all DynamicVpdPcds
> - #
> - RecordSet = QueryDscItem(self.TblDsc, Model, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, Type, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - (K1, K2, K3, K4, K5) = GetDynamicVpdPcd(NewItem, Type,
> Filename, -1)
> - MergeArches(Pcds, (K1, K2, K3, K4, K5, IncludeFile[4]), Arch)
> - self.PcdToken[Record[3]] = (K2, K1)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - (K1, K2, K3, K4, K5) = GetDynamicVpdPcd(Record[0], Type,
> ContainerFile, Record[2])
> - MergeArches(Pcds, (K1, K2, K3, K4, K5, Record[4]), Arch)
> - self.PcdToken[Record[3]] = (K2, K1)
> -
> - for Key in Pcds:
> - (Status, SkuInfoList) = self.GenSkuInfoList(Key[5],
> self.Platform.SkuInfos.SkuInfoList, '', '', '', '', Key[2], '')
> - if Status == False:
> - ErrorMsg = "The SKUID '%s' used in section '%s' is not defined in
> section [SkuIds]" % (SkuInfoList, Type)
> - EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg,
> ContainerFile, RaiseError=EdkLogger.IsRaiseError)
> - Pcd = PcdClass(Key[0], '', Key[1], '', Key[3], '', Key[4], [], SkuInfoList, [])
> - Pcd.SupArchList = Pcds[Key]
> - self.Platform.DynamicPcdBuildDefinitions.append(Pcd)
> -
> -
> - ## Get Component
> - #
> - # Get Component section defined in Dsc file
> - #
> - # @param ContainerFile: The file which describes the Components, used
> for error report
> - #
> - # @retval PlatformModuleClass() A instance for PlatformModuleClass
> - #
> - def GenComponents(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_COMPONENTS)
> - Components = sdict()
> - #
> - # Get all include files
> - #
> - IncludeFiles = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_INCLUDE, MODEL_META_DATA_COMPONENT,
> self.FileID)
> -
> - #
> - # Get all Components
> - #
> - RecordSet = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_COMPONENT, -1, self.FileID)
> -
> - #
> - # Go through each arch
> - #
> - for Arch in DataType.ARCH_LIST:
> - for IncludeFile in IncludeFiles:
> - if IncludeFile[1] == Arch or IncludeFile[1] ==
> TAB_ARCH_COMMON.upper():
> - Filename = CheckFileExist(self.WorkspaceDir, IncludeFile[0],
> ContainerFile, TAB_COMPONENTS, '', IncludeFile[2])
> - for NewItem in open(Filename, 'r').readlines():
> - if CleanString(NewItem) == '':
> - continue
> - NewItems = []
> - GetComponents(open(Filename, 'r').read(),
> TAB_COMPONENTS, NewItems, TAB_COMMENT_SPLIT)
> - for NewComponent in NewItems:
> - MergeArches(Components,
> self.GenComponent(NewComponent, Filename), Arch)
> -
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON.upper():
> - Lib, Bo, Pcd = [], [], []
> -
> - SubLibSet = QueryDscItem(self.TblDsc,
> MODEL_EFI_LIBRARY_CLASS, Record[3], self.FileID)
> - for SubLib in SubLibSet:
> - Lib.append(TAB_VALUE_SPLIT.join([SubLib[0], SubLib[4]]))
> -
> - SubBoSet = QueryDscItem(self.TblDsc,
> MODEL_META_DATA_BUILD_OPTION, Record[3], self.FileID)
> - for SubBo in SubBoSet:
> - Bo.append(SubBo[0])
> -
> - SubPcdSet1 = QueryDscItem(self.TblDsc,
> MODEL_PCD_FIXED_AT_BUILD, Record[3], self.FileID)
> - SubPcdSet2 = QueryDscItem(self.TblDsc,
> MODEL_PCD_PATCHABLE_IN_MODULE, Record[3], self.FileID)
> - SubPcdSet3 = QueryDscItem(self.TblDsc,
> MODEL_PCD_FEATURE_FLAG, Record[3], self.FileID)
> - SubPcdSet4 = QueryDscItem(self.TblDsc,
> MODEL_PCD_DYNAMIC_EX_DEFAULT, Record[3], self.FileID)
> - SubPcdSet5 = QueryDscItem(self.TblDsc,
> MODEL_PCD_DYNAMIC_DEFAULT, Record[3], self.FileID)
> - for SubPcd in SubPcdSet1:
> - Pcd.append([DataType.TAB_PCDS_FIXED_AT_BUILD,
> SubPcd[0], SubPcd[3]])
> - for SubPcd in SubPcdSet2:
> - Pcd.append([DataType.TAB_PCDS_PATCHABLE_IN_MODULE,
> SubPcd[0], SubPcd[3]])
> - for SubPcd in SubPcdSet3:
> - Pcd.append([DataType.TAB_PCDS_FEATURE_FLAG, SubPcd[0],
> SubPcd[3]])
> - for SubPcd in SubPcdSet4:
> - Pcd.append([DataType.TAB_PCDS_DYNAMIC_EX, SubPcd[0],
> SubPcd[3]])
> - for SubPcd in SubPcdSet5:
> - Pcd.append([DataType.TAB_PCDS_DYNAMIC, SubPcd[0],
> SubPcd[3]])
> - Item = [Record[0], Lib, Bo, Pcd]
> - MergeArches(Components, self.GenComponent(Item,
> ContainerFile), Arch)
> -
> - for Key in Components.keys():
> - Key.SupArchList = Components[Key]
> - self.Platform.Modules.ModuleList.append(Key)
> -
> - ## Get Component
> - #
> - # Get Component section defined in Dsc file
> - #
> - # @param Item: Contents includes a component block
> - # @param ContainerFile: The file which describes the library class, used
> for error report
> - #
> - # @retval PlatformModuleClass() A instance for PlatformModuleClass
> - #
> - def GenComponent(self, Item, ContainerFile, LineNo= -1):
> - (InfFilename, ExecFilename) = GetExec(Item[0])
> - LibraryClasses = Item[1]
> - BuildOptions = Item[2]
> - Pcds = Item[3]
> - Component = PlatformModuleClass()
> - Component.FilePath = NormPath(InfFilename)
> - Component.ExecFilePath = NormPath(ExecFilename)
> - CheckFileType(Component.FilePath, '.Inf', ContainerFile, 'component
> name', Item[0], LineNo)
> - CheckFileExist(self.WorkspaceDir, Component.FilePath, ContainerFile,
> 'component', Item[0], LineNo)
> - for Lib in LibraryClasses:
> - List = GetSplitValueList(Lib)
> - if len(List) != 2:
> - RaiseParserError(Lib, 'LibraryClasses', ContainerFile,
> '<ClassName>|<InfFilename>')
> - LibName = List[0]
> - LibFile = NormPath(List[1])
> - if LibName == "" or LibName == "NULL":
> - LibName = "NULL%d" % self._NullClassIndex
> - self._NullClassIndex += 1
> - CheckFileType(List[1], '.Inf', ContainerFile, 'library instance of
> component ', Lib, LineNo)
> - CheckFileExist(self.WorkspaceDir, LibFile, ContainerFile, 'library
> instance of component', Lib, LineNo)
> -
> Component.LibraryClasses.LibraryList.append(PlatformLibraryClass(LibName,
> LibFile))
> - for BuildOption in BuildOptions:
> - Key = GetBuildOption(BuildOption, ContainerFile)
> -
> Component.ModuleSaBuildOption.BuildOptionList.append(BuildOptionClass(
> Key[0], Key[1], Key[2]))
> - for Pcd in Pcds:
> - Type = Pcd[0]
> - List = GetSplitValueList(Pcd[1])
> - PcdId = Pcd[2]
> -
> - TokenInfo = None
> - #
> - # For FeatureFlag
> - #
> - if Type == DataType.TAB_PCDS_FEATURE_FLAG:
> - if len(List) != 2:
> - RaiseParserError(Pcd[1], 'Components', ContainerFile,
> '<PcdTokenSpaceGuidCName>.<PcdTokenName>|TRUE/FALSE')
> -
> - CheckPcdTokenInfo(List[0], 'Components', ContainerFile)
> - TokenInfo = GetSplitValueList(List[0], DataType.TAB_SPLIT)
> - Component.PcdBuildDefinitions.append(PcdClass(TokenInfo[1], '',
> TokenInfo[0], '', '', List[1], Type, [], {}, []))
> - #
> - # For FixedAtBuild or PatchableInModule
> - #
> - if Type == DataType.TAB_PCDS_FIXED_AT_BUILD or Type ==
> DataType.TAB_PCDS_PATCHABLE_IN_MODULE:
> - List.append('')
> - if len(List) != 3 and len(List) != 4:
> - RaiseParserError(Pcd[1], 'Components', ContainerFile,
> '<PcdTokenSpaceGuidCName>.<PcdTokenName>|<Value>[|<MaxDatumSiz
> e>]')
> -
> - CheckPcdTokenInfo(List[0], 'Components', ContainerFile)
> - TokenInfo = GetSplitValueList(List[0], DataType.TAB_SPLIT)
> - Component.PcdBuildDefinitions.append(PcdClass(TokenInfo[1], '',
> TokenInfo[0], '', List[2], List[1], Type, [], {}, []))
> -
> - #
> - # For Dynamic or DynamicEx
> - #
> - if Type == DataType.TAB_PCDS_DYNAMIC or Type ==
> DataType.TAB_PCDS_DYNAMIC_EX:
> - if len(List) != 1:
> - RaiseParserError(Pcd[1], 'Components', ContainerFile,
> '<PcdTokenSpaceGuidCName>.<PcdTokenName>')
> -
> - CheckPcdTokenInfo(List[0], 'Components', ContainerFile)
> - TokenInfo = GetSplitValueList(List[0], DataType.TAB_SPLIT)
> - Component.PcdBuildDefinitions.append(PcdClass(TokenInfo[1], '',
> TokenInfo[0], '', '', '', Type, [], {}, []))
> -
> - #
> - # Add to PcdToken
> - #
> - self.PcdToken[PcdId] = (TokenInfo[0], TokenInfo[1])
> -
> - return Component
> - #End of GenComponent
> -
> - ## Gen SkuInfoList
> - #
> - # Gen SkuInfoList section defined in Dsc file
> - #
> - # @param SkuNameList: Input value for SkuNameList
> - # @param SkuInfo: Input value for SkuInfo
> - # @param VariableName: Input value for VariableName
> - # @param VariableGuid: Input value for VariableGuid
> - # @param VariableOffset: Input value for VariableOffset
> - # @param HiiDefaultValue: Input value for HiiDefaultValue
> - # @param VpdOffset: Input value for VpdOffset
> - # @param DefaultValue: Input value for DefaultValue
> - #
> - # @retval (False, SkuName) Not found in section SkuId Dsc file
> - # @retval (True, SkuInfoList) Found in section SkuId of Dsc file
> - #
> - def GenSkuInfoList(self, SkuNameList, SkuInfo, VariableName='',
> VariableGuid='', VariableOffset='', HiiDefaultValue='', VpdOffset='',
> DefaultValue=''):
> - SkuNameList = GetSplitValueList(SkuNameList)
> - if SkuNameList is None or SkuNameList == [] or SkuNameList == ['']:
> - SkuNameList = ['DEFAULT']
> - SkuInfoList = {}
> - for Item in SkuNameList:
> - if Item not in SkuInfo:
> - return False, Item
> - Sku = SkuInfoClass(Item, SkuInfo[Item], VariableName, VariableGuid,
> VariableOffset, HiiDefaultValue, VpdOffset, DefaultValue)
> - SkuInfoList[Item] = Sku
> -
> - return True, SkuInfoList
> -
> - ## Parse Include statement
> - #
> - # Get include file path
> - #
> - # 1. Insert a record into TblFile ???
> - # 2. Insert a record into TblDsc
> - # Value1: IncludeFilePath
> - #
> - # @param LineValue: The line of incude statement
> - def ParseInclude(self, LineValue, StartLine, Table, FileID, Filename,
> SectionName, Model, Arch):
> - EdkLogger.debug(EdkLogger.DEBUG_2, "!include statement '%s' found
> in section %s" % (LineValue, SectionName))
> - SectionModel = Section[SectionName.upper()]
> - IncludeFile =
> CleanString(LineValue[LineValue.upper().find(DataType.TAB_INCLUDE.uppe
> r() + ' ') + len(DataType.TAB_INCLUDE + ' ') : ])
> - Table.Insert(Model, IncludeFile, '', '', Arch, SectionModel, FileID,
> StartLine, -1, StartLine, -1, 0)
> -
> - ## Parse DEFINE statement
> - #
> - # Get DEFINE macros
> - #
> - # 1. Insert a record into TblDsc
> - # Value1: Macro Name
> - # Value2: Macro Value
> - #
> - def ParseDefine(self, LineValue, StartLine, Table, FileID, Filename,
> SectionName, Model, Arch):
> - EdkLogger.debug(EdkLogger.DEBUG_2, "DEFINE statement '%s' found in
> section %s" % (LineValue, SectionName))
> - SectionModel = Section[SectionName.upper()]
> - Define =
> GetSplitValueList(CleanString(LineValue[LineValue.upper().find(DataType.TA
> B_DEFINE.upper() + ' ') + len(DataType.TAB_DEFINE + ' ') : ]),
> TAB_EQUAL_SPLIT, 1)
> - Table.Insert(Model, Define[0], Define[1], '', Arch, SectionModel, FileID,
> StartLine, -1, StartLine, -1, 0)
> -
> - ## Parse Defines section
> - #
> - # Get one item in defines section
> - #
> - # Value1: Item Name
> - # Value2: Item Value
> - #
> - def ParseDefinesSection(self, LineValue, StartLine, Table, FileID, Filename,
> SectionName, Model, Arch):
> - EdkLogger.debug(EdkLogger.DEBUG_2, "Parse '%s' found in section %s"
> % (LineValue, SectionName))
> - Defines = GetSplitValueList(LineValue, TAB_EQUAL_SPLIT, 1)
> - if len(Defines) != 2:
> - RaiseParserError(LineValue, SectionName, Filename, '', StartLine)
> - self.TblDsc.Insert(Model, Defines[0], Defines[1], '', Arch, -1, FileID,
> StartLine, -1, StartLine, -1, 0)
> -
> - ## Insert conditional statements
> - #
> - # Pop an item from IfDefList
> - # Insert conditional statements to database
> - #
> - # @param Filename: Path of parsing file
> - # @param IfDefList: A list stored current conditional statements
> - # @param EndLine: The end line no
> - # @param ArchList: Support arch list
> - #
> - def InsertConditionalStatement(self, Filename, FileID, BelongsToItem,
> IfDefList, EndLine, ArchList):
> - (Value1, Value2, Value3, Model, StartColumn, EndColumn, Enabled) =
> ('', '', '', -1, -1, -1, 0)
> - if IfDefList == []:
> - ErrorMsg = 'Not suited conditional statement in file %s' % Filename
> - EdkLogger.error("DSC File Parser", PARSER_ERROR, ErrorMsg,
> Filename, RaiseError=EdkLogger.IsRaiseError)
> - else:
> - #
> - # Get New Dsc item ID
> - #
> - DscID = self.TblDsc.GetCount() + 1
> -
> - #
> - # Pop the conditional statements which is closed
> - #
> - PreviousIf = IfDefList.pop()
> - EdkLogger.debug(EdkLogger.DEBUG_5, 'Previous IfDef: ' +
> str(PreviousIf))
> -
> - #
> - # !ifdef and !ifndef
> - #
> - if PreviousIf[2] in
> (MODEL_META_DATA_CONDITIONAL_STATEMENT_IFDEF,
> MODEL_META_DATA_CONDITIONAL_STATEMENT_IFNDEF):
> - Value1 = PreviousIf[0]
> - Model = PreviousIf[2]
> - self.TblDsc.Insert(Model, Value1, Value2, Value3, ArchList,
> BelongsToItem, self.FileID, PreviousIf[1], StartColumn, EndLine, EndColumn,
> Enabled)
> - #
> - # !if and !elseif
> - #
> - elif PreviousIf[2] in
> (MODEL_META_DATA_CONDITIONAL_STATEMENT_IF, Model):
> - List = PreviousIf[0].split(' ')
> - Value1, Value2, Value3 = '', '==', '0'
> - if len(List) == 3:
> - Value1 = List[0]
> - Value2 = List[1]
> - Value3 = List[2]
> - Value3 = SplitString(Value3)
> - if len(List) == 1:
> - Value1 = List[0]
> - Model = PreviousIf[2]
> - self.TblDsc.Insert(Model, Value1, Value2, Value3, ArchList,
> BelongsToItem, self.FileID, PreviousIf[1], StartColumn, EndLine, EndColumn,
> Enabled)
> - #
> - # !else
> - #
> - elif PreviousIf[2] in
> (MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE, Model):
> - Value1 = PreviousIf[0].strip()
> - Model = PreviousIf[2]
> - self.TblDsc.Insert(Model, Value1, Value2, Value3, ArchList,
> BelongsToItem, self.FileID, PreviousIf[1], StartColumn, EndLine, EndColumn,
> Enabled)
> -
> - ## Load Dsc file
> - #
> - # Load the file if it exists
> - #
> - # @param Filename: Input value for filename of Dsc file
> - #
> - def LoadDscFile(self, Filename):
> - #
> - # Insert a record for file
> - #
> - Filename = NormPath(Filename)
> - self.Identification.FileFullPath = Filename
> - (self.Identification.FileRelativePath, self.Identification.FileName) =
> os.path.split(Filename)
> - self.FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_DSC)
> -
> - #
> - # Init DscTable
> - #
> - #self.TblDsc.Table = "Dsc%s" % FileID
> - #self.TblDsc.Create()
> -
> - #
> - # Init common datas
> - #
> - IfDefList, SectionItemList, CurrentSection, ArchList, ThirdList,
> IncludeFiles = \
> - [], [], TAB_UNKNOWN, [], [], []
> - LineNo = 0
> -
> - #
> - # Parse file content
> - #
> - IsFindBlockComment = False
> - ReservedLine = ''
> - for Line in open(Filename, 'r'):
> - LineNo = LineNo + 1
> - #
> - # Remove comment block
> - #
> - if Line.find(TAB_COMMENT_EDK_START) > -1:
> - ReservedLine = GetSplitList(Line, TAB_COMMENT_EDK_START, 1)[0]
> - IsFindBlockComment = True
> - if Line.find(TAB_COMMENT_EDK_END) > -1:
> - Line = ReservedLine + GetSplitList(Line, TAB_COMMENT_EDK_END,
> 1)[1]
> - ReservedLine = ''
> - IsFindBlockComment = False
> - if IsFindBlockComment:
> - continue
> -
> - #
> - # Remove comments at tail and remove spaces again
> - #
> - Line = CleanString(Line)
> - if Line == '':
> - continue
> -
> - #
> - # Find a new section tab
> - # First insert previous section items
> - # And then parse the content of the new section
> - #
> - if Line.startswith(TAB_SECTION_START) and
> Line.endswith(TAB_SECTION_END):
> - #
> - # Insert items data of previous section
> - #
> - self.InsertSectionItemsIntoDatabase(self.FileID, Filename,
> CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList)
> - #
> - # Parse the new section
> - #
> - SectionItemList = []
> - ArchList = []
> - ThirdList = []
> -
> - CurrentSection = ''
> - LineList = GetSplitValueList(Line[len(TAB_SECTION_START):len(Line)
> - len(TAB_SECTION_END)], TAB_COMMA_SPLIT)
> - for Item in LineList:
> - ItemList = GetSplitValueList(Item, TAB_SPLIT)
> - if CurrentSection == '':
> - CurrentSection = ItemList[0]
> - else:
> - if CurrentSection != ItemList[0]:
> - EdkLogger.error("Parser", PARSER_ERROR, "Different section
> names '%s' and '%s' are found in one section definition, this is not allowed."
> % (CurrentSection, ItemList[0]), File=Filename, Line=LineNo,
> RaiseError=EdkLogger.IsRaiseError)
> - if CurrentSection.upper() not in self.KeyList:
> - RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
> - CurrentSection = TAB_UNKNOWN
> - continue
> - ItemList.append('')
> - ItemList.append('')
> - if len(ItemList) > 5:
> - RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
> - else:
> - if ItemList[1] != '' and ItemList[1].upper() not in
> ARCH_LIST_FULL:
> - EdkLogger.error("Parser", PARSER_ERROR, "Invalid Arch
> definition '%s' found" % ItemList[1], File=Filename, Line=LineNo,
> RaiseError=EdkLogger.IsRaiseError)
> - ArchList.append(ItemList[1].upper())
> - ThirdList.append(ItemList[2])
> -
> - continue
> -
> - #
> - # Not in any defined section
> - #
> - if CurrentSection == TAB_UNKNOWN:
> - ErrorMsg = "%s is not in any defined section" % Line
> - EdkLogger.error("Parser", PARSER_ERROR, ErrorMsg, File=Filename,
> Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
> -
> - #
> - # Add a section item
> - #
> - SectionItemList.append([Line, LineNo])
> - # End of parse
> - #End of For
> -
> - #
> - # Insert items data of last section
> - #
> - self.InsertSectionItemsIntoDatabase(self.FileID, Filename,
> CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList)
> -
> - #
> - # Parse conditional statements
> - #
> - self.ParseConditionalStatement()
> -
> - #
> - # Replace all DEFINE macros with its actual values
> - #
> - #ParseDefineMacro2(self.TblDsc, self.RecordSet,
> GlobalData.gGlobalDefines)
> - ParseDefineMacro(self.TblDsc, GlobalData.gGlobalDefines)
> -
> -
> - ## ParseConditionalStatement
> - #
> - # Search all conditional statement and disable no match records
> - #
> - def ParseConditionalStatement(self):
> - #
> - # Disabled all !if/!elif/!ifdef statements without DEFINE
> - #
> - SqlCommand = """select A.StartLine, A.EndLine from %s as A
> - where A.Model in (%s, %s, %s)
> - and A.Enabled = 0
> - and A.BelongsToFile = %s
> - and A.Value1 not in (select B.Value1 from %s as B
> - where B.Model = %s
> - and B.Enabled = 0
> - and A.StartLine > B.StartLine
> - and A.Arch = B.Arch
> - and A.BelongsToItem = B.BelongsToItem
> - and A.BelongsToFile = B.BelongsToFile) """ % \
> - (self.TblDsc.Table, \
> - MODEL_META_DATA_CONDITIONAL_STATEMENT_IF,
> MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE,
> MODEL_META_DATA_CONDITIONAL_STATEMENT_IFDEF, \
> - self.FileID, \
> - self.TblDsc.Table, \
> - MODEL_META_DATA_DEFINE)
> - RecordSet = self.TblDsc.Exec(SqlCommand)
> - for Record in RecordSet:
> - SqlCommand = """Update %s set Enabled = -1 where StartLine >= %s
> and EndLine <= %s""" % (self.TblDsc.Table, Record[0], Record[1])
> - self.TblDsc.Exec(SqlCommand)
> -
> - #
> - # Disabled !ifndef with DEFINE
> - #
> - SqlCommand = """select A.StartLine, A.EndLine from %s as A
> - where A.Model = %s
> - and A.Enabled = 0
> - and A.BelongsToFile = %s
> - and A.Value1 in (select B.Value1 from %s as B
> - where B.Model = %s
> - and B.Enabled = 0
> - and A.StartLine > B.StartLine
> - and A.Arch = B.Arch
> - and A.BelongsToItem = B.BelongsToItem
> - and A.BelongsToFile = B.BelongsToFile)""" % \
> - (self.TblDsc.Table, \
> - MODEL_META_DATA_CONDITIONAL_STATEMENT_IFNDEF, \
> - self.FileID, \
> - self.TblDsc.Table, \
> - MODEL_META_DATA_DEFINE)
> - RecordSet = self.TblDsc.Exec(SqlCommand)
> - for Record in RecordSet:
> - SqlCommand = """Update %s set Enabled = -1 where StartLine >= %s
> and EndLine <= %s""" % (self.TblDsc.Table, Record[0], Record[1])
> - EdkLogger.debug(4, "SqlCommand: %s" % SqlCommand)
> - self.Cur.execute(SqlCommand)
> -
> - #
> - # Disabled !if, !elif and !else with un-match value
> - #
> - SqlCommand = """select A.Model, A.Value1, A.Value2, A.Value3,
> A.StartLine, A.EndLine, B.Value2 from %s as A join %s as B
> - where A.Model in (%s, %s)
> - and A.Enabled = 0
> - and A.BelongsToFile = %s
> - and B.Enabled = 0
> - and B.Model = %s
> - and A.Value1 = B.Value1
> - and A.StartLine > B.StartLine
> - and A.BelongsToItem = B.BelongsToItem
> - and A.BelongsToFile = B.BelongsToFile""" % \
> - (self.TblDsc.Table, self.TblDsc.Table, \
> - MODEL_META_DATA_CONDITIONAL_STATEMENT_IF,
> MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE, \
> - self.FileID, MODEL_META_DATA_DEFINE)
> - RecordSet = self.TblDsc.Exec(SqlCommand)
> - DisabledList = []
> - for Record in RecordSet:
> - if Record[0] == MODEL_META_DATA_CONDITIONAL_STATEMENT_IF:
> - if not self.Compare(Record[6], Record[2], Record[3]):
> - SqlCommand = """Update %s set Enabled = -1 where StartLine >=
> %s and EndLine <= %s""" % (self.TblDsc.Table, Record[4], Record[5])
> - self.TblDsc.Exec(SqlCommand)
> - else:
> - DisabledList.append(Record[1])
> - continue
> - if Record[0] ==
> MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE and Record[1] in
> DisabledList:
> - SqlCommand = """Update %s set Enabled = -1 where StartLine >=
> %s and EndLine <= %s""" % (self.TblDsc.Table, Record[4], Record[5])
> - self.TblDsc.Exec(SqlCommand)
> -
> - ## Compare
> - #
> - # Compare two values
> - # @param Value1:
> - # @param CompareType:
> - # @param Value2:
> - #
> - def Compare(self, Value1, CompareType, Value2):
> - Command = """Value1 %s Value2""" % CompareType
> - return eval(Command)
> -
> - ## First time to insert records to database
> - #
> - # Insert item data of a section to database
> - # @param FileID: The ID of belonging file
> - # @param Filename: The name of belonging file
> - # @param CurrentSection: The name of currect section
> - # @param SectionItemList: A list of items of the section
> - # @param ArchList: A list of arches
> - # @param ThirdList: A list of third parameters, ModuleType for
> LibraryClass and SkuId for Dynamic Pcds
> - # @param IfDefList: A list of all conditional statements
> - #
> - def InsertSectionItemsIntoDatabase(self, FileID, Filename,
> CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList):
> - #
> - # Insert each item data of a section
> - #
> - for Index in range(0, len(ArchList)):
> - Arch = ArchList[Index]
> - Third = ThirdList[Index]
> - if Arch == '':
> - Arch = TAB_ARCH_COMMON.upper()
> -
> - Model = Section[CurrentSection.upper()]
> - #Records = self.RecordSet[Model]
> -
> - for SectionItem in SectionItemList:
> - BelongsToItem, EndLine, EndColumn = -1, -1, -1
> - LineValue, StartLine, EndLine = SectionItem[0], SectionItem[1],
> SectionItem[1]
> -
> -
> - EdkLogger.debug(4, "Parsing %s ..." % LineValue)
> - #
> - # Parse '!ifdef'
> - #
> - if LineValue.upper().find(TAB_IF_DEF.upper()) > -1:
> - IfDefList.append((LineValue[len(TAB_IF_N_DEF):].strip(),
> StartLine, MODEL_META_DATA_CONDITIONAL_STATEMENT_IFDEF))
> - continue
> -
> - #
> - # Parse '!ifndef'
> - #
> - if LineValue.upper().find(TAB_IF_N_DEF.upper()) > -1:
> - IfDefList.append((LineValue[len(TAB_IF_N_DEF):].strip(),
> StartLine, MODEL_META_DATA_CONDITIONAL_STATEMENT_IFNDEF))
> - continue
> -
> - #
> - # Parse '!endif'
> - #
> - if LineValue.upper().find(TAB_END_IF.upper()) > -1:
> - self.InsertConditionalStatement(Filename, FileID, Model,
> IfDefList, StartLine, Arch)
> - continue
> - #
> - # Parse '!if'
> - #
> - if LineValue.upper().find(TAB_IF.upper()) > -1:
> - IfDefList.append((LineValue[len(TAB_IF):].strip(), StartLine,
> MODEL_META_DATA_CONDITIONAL_STATEMENT_IF))
> - continue
> -
> - #
> - # Parse '!elseif'
> - #
> - if LineValue.upper().find(TAB_ELSE_IF.upper()) > -1:
> - self.InsertConditionalStatement(Filename, FileID, Model,
> IfDefList, StartLine - 1, Arch)
> - IfDefList.append((LineValue[len(TAB_ELSE_IF):].strip(), StartLine,
> MODEL_META_DATA_CONDITIONAL_STATEMENT_IF))
> - continue
> -
> - #
> - # Parse '!else'
> - #
> - if LineValue.upper().find(TAB_ELSE.upper()) > -1:
> - Key = IfDefList[-1][0].split(' ' , 1)[0].strip()
> - self.InsertConditionalStatement(Filename, FileID, Model,
> IfDefList, StartLine, Arch)
> - IfDefList.append((Key, StartLine,
> MODEL_META_DATA_CONDITIONAL_STATEMENT_ELSE))
> - continue
> -
> - #
> - # Parse !include statement first
> - #
> - if LineValue.upper().find(DataType.TAB_INCLUDE.upper() + ' ') > -1:
> - self.ParseInclude(LineValue, StartLine, self.TblDsc, FileID,
> Filename, CurrentSection, MODEL_META_DATA_INCLUDE, Arch)
> - continue
> -
> - #
> - # And then parse DEFINE statement
> - #
> - if LineValue.upper().find(DataType.TAB_DEFINE.upper() + ' ') > -1:
> - self.ParseDefine(LineValue, StartLine, self.TblDsc, FileID,
> Filename, CurrentSection, MODEL_META_DATA_DEFINE, Arch)
> - continue
> -
> - #
> - # At last parse other sections
> - #
> - if CurrentSection == TAB_LIBRARY_CLASSES or CurrentSection in
> TAB_PCD_DYNAMIC_TYPE_LIST or CurrentSection in
> TAB_PCD_DYNAMIC_EX_TYPE_LIST:
> - ID = self.TblDsc.Insert(Model, LineValue, Third, '', Arch, -1, FileID,
> StartLine, -1, StartLine, -1, 0)
> - #Records.append([LineValue, Arch, StartLine, ID, Third])
> - continue
> - elif CurrentSection != TAB_COMPONENTS:
> - ID = self.TblDsc.Insert(Model, LineValue, '', '', Arch, -1, FileID,
> StartLine, -1, StartLine, -1, 0)
> - #Records.append([LineValue, Arch, StartLine, ID, Third])
> - continue
> -
> - #
> - # Parse COMPONENT section
> - #
> - if CurrentSection == TAB_COMPONENTS:
> - Components = []
> - GetComponent(SectionItemList, Components)
> - for Component in Components:
> - EdkLogger.debug(4, "Parsing component %s ..." % Component)
> - DscItmeID =
> self.TblDsc.Insert(MODEL_META_DATA_COMPONENT, Component[0], '', '',
> Arch, -1, FileID, StartLine, -1, StartLine, -1, 0)
> - for Item in Component[1]:
> - List = GetSplitValueList(Item, MaxSplit=2)
> - LibName, LibIns = '', ''
> - if len(List) == 2:
> - LibName = List[0]
> - LibIns = List[1]
> - else:
> - LibName = List[0]
> - self.TblDsc.Insert(MODEL_EFI_LIBRARY_CLASS, LibName, LibIns,
> '', Arch, DscItmeID, FileID, StartLine, -1, StartLine, -1, 0)
> - for Item in Component[2]:
> - self.TblDsc.Insert(MODEL_META_DATA_BUILD_OPTION, Item,
> '', '', Arch, DscItmeID, FileID, StartLine, -1, StartLine, -1, 0)
> - for Item in Component[3]:
> - Model = Section[Item[0].upper()]
> - self.TblDsc.Insert(Model, Item[1], '', '', Arch, DscItmeID, FileID,
> StartLine, -1, StartLine, -1, 0)
> -
> - ## Show detailed information of Dsc
> - #
> - # Print all members and their values of Dsc class
> - #
> - def ShowDsc(self):
> - print TAB_SECTION_START + TAB_INF_DEFINES + TAB_SECTION_END
> - printDict(self.Defines.DefinesDictionary)
> -
> - for Key in self.KeyList:
> - for Arch in DataType.ARCH_LIST_FULL:
> - Command = "printList(TAB_SECTION_START + '" + \
> - Key + DataType.TAB_SPLIT + Arch + \
> - "' + TAB_SECTION_END, self.Contents[arch]." + Key + ')'
> - eval(Command)
> -
> - ## Show detailed information of Platform
> - #
> - # Print all members and their values of Platform class
> - #
> - def ShowPlatform(self):
> - M = self.Platform
> - for Arch in M.Header.keys():
> - print '\nArch =', Arch
> - print 'Filename =', M.Header[Arch].FileName
> - print 'FullPath =', M.Header[Arch].FullPath
> - print 'BaseName =', M.Header[Arch].Name
> - print 'Guid =', M.Header[Arch].Guid
> - print 'Version =', M.Header[Arch].Version
> - print 'DscSpecification =', M.Header[Arch].DscSpecification
> - print 'SkuId =', M.Header[Arch].SkuIdName
> - print 'SupArchList =', M.Header[Arch].SupArchList
> - print 'BuildTargets =', M.Header[Arch].BuildTargets
> - print 'OutputDirectory =', M.Header[Arch].OutputDirectory
> - print 'BuildNumber =', M.Header[Arch].BuildNumber
> - print 'MakefileName =', M.Header[Arch].MakefileName
> - print 'BsBaseAddress =', M.Header[Arch].BsBaseAddress
> - print 'RtBaseAddress =', M.Header[Arch].RtBaseAddress
> - print 'Define =', M.Header[Arch].Define
> - print 'Fdf =', M.FlashDefinitionFile.FilePath
> - print '\nBuildOptions =', M.BuildOptions, M.BuildOptions.IncludeFiles
> - for Item in M.BuildOptions.BuildOptionList:
> - print '\t', 'ToolChainFamily =', Item.ToolChainFamily, 'ToolChain =',
> Item.ToolChain, 'Option =', Item.Option, 'Arch =', Item.SupArchList
> - print '\nSkuIds =', M.SkuInfos.SkuInfoList, M.SkuInfos.IncludeFiles
> - print '\nLibraries =', M.Libraries, M.Libraries.IncludeFiles
> - for Item in M.Libraries.LibraryList:
> - print '\t', Item.FilePath, Item.SupArchList, Item.Define
> - print '\nLibraryClasses =', M.LibraryClasses,
> M.LibraryClasses.IncludeFiles
> - for Item in M.LibraryClasses.LibraryList:
> - print '\t', Item.Name, Item.FilePath, Item.SupModuleList,
> Item.SupArchList, Item.Define
> - print '\nPcds =', M.DynamicPcdBuildDefinitions
> - for Item in M.DynamicPcdBuildDefinitions:
> - print '\tCname=', Item.CName, 'TSG=', Item.TokenSpaceGuidCName,
> 'Value=', Item.DefaultValue, 'Token=', Item.Token, 'Type=', Item.ItemType,
> 'Datum=', Item.DatumType, 'Size=', Item.MaxDatumSize, 'Arch=',
> Item.SupArchList, Item.SkuInfoList
> - for Sku in Item.SkuInfoList.values():
> - print '\t\t', str(Sku)
> - print '\nComponents =', M.Modules.ModuleList,
> M.Modules.IncludeFiles
> - for Item in M.Modules.ModuleList:
> - print '\t', Item.FilePath, Item.ExecFilePath, Item.SupArchList
> - for Lib in Item.LibraryClasses.LibraryList:
> - print '\t\tLib:', Lib.Name, Lib.FilePath
> - for Bo in Item.ModuleSaBuildOption.BuildOptionList:
> - print '\t\tBuildOption:', Bo.ToolChainFamily, Bo.ToolChain,
> Bo.Option
> - for Pcd in Item.PcdBuildDefinitions:
> - print '\t\tPcd:', Pcd.CName, Pcd.TokenSpaceGuidCName,
> Pcd.MaxDatumSize, Pcd.DefaultValue, Pcd.ItemType
> -
> -##
> -#
> -# This acts like the main() function for the script, unless it is 'import'ed into
> another
> -# script.
> -#
> -if __name__ == '__main__':
> - EdkLogger.Initialize()
> - EdkLogger.SetLevel(EdkLogger.DEBUG_0)
> -
> - W = os.getenv('WORKSPACE')
> - F = os.path.join(W, 'Nt32Pkg/Nt32Pkg.dsc')
> -
> - Db = Database.Database('Dsc.db')
> - Db.InitDatabase()
> -
> - P = Dsc(os.path.normpath(F), True, True, W, Db)
> - P.ShowPlatform()
> -
> - Db.Close()
> diff --git a/BaseTools/Source/Python/Common/FdfClassObject.py
> b/BaseTools/Source/Python/Common/FdfClassObject.py
> deleted file mode 100644
> index 9a7d6494d331..000000000000
> --- a/BaseTools/Source/Python/Common/FdfClassObject.py
> +++ /dev/null
> @@ -1,106 +0,0 @@
> -## @file
> -# This file is used to define each component of FDF file
> -#
> -# Copyright (c) 2008, Intel Corporation. All rights reserved.<BR>
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the
> BSD License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> -##
> -# Import Modules
> -#
> -from FdfParserLite import FdfParser
> -from Table.TableFdf import TableFdf
> -from CommonDataClass.DataClass import MODEL_FILE_FDF, MODEL_PCD,
> MODEL_META_DATA_COMPONENT
> -from String import NormPath
> -
> -
> -## Fdf
> -#
> -# This class defined the structure used in Fdf object
> -#
> -# @param Filename: Input value for Ffilename of Fdf file, default is None
> -# @param WorkspaceDir: Input value for current workspace directory,
> default is None
> -#
> -class Fdf(object):
> - def __init__(self, Filename = None, IsToDatabase = False, WorkspaceDir =
> None, Database = None):
> - self.WorkspaceDir = WorkspaceDir
> - self.IsToDatabase = IsToDatabase
> -
> - self.Cur = Database.Cur
> - self.TblFile = Database.TblFile
> - self.TblFdf = Database.TblFdf
> - self.FileID = -1
> - self.FileList = {}
> -
> - #
> - # Load Fdf file if filename is not None
> - #
> - if Filename is not None:
> - self.LoadFdfFile(Filename)
> -
> - #
> - # Insert a FDF file record into database
> - #
> - def InsertFile(self, Filename):
> - FileID = -1
> - Filename = NormPath(Filename)
> - if Filename not in self.FileList:
> - FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_FDF)
> - self.FileList[Filename] = FileID
> -
> - return self.FileList[Filename]
> -
> -
> - ## Load Fdf file
> - #
> - # Load the file if it exists
> - #
> - # @param Filename: Input value for filename of Fdf file
> - #
> - def LoadFdfFile(self, Filename):
> - FileList = []
> - #
> - # Parse Fdf file
> - #
> - Filename = NormPath(Filename)
> - Fdf = FdfParser(Filename)
> - Fdf.ParseFile()
> -
> - #
> - # Insert inf file and pcd information
> - #
> - if self.IsToDatabase:
> - (Model, Value1, Value2, Value3, Arch, BelongsToItem, BelongsToFile,
> StartLine, StartColumn, EndLine, EndColumn, Enabled) = \
> - (0, '', '', '', 'COMMON', -1, -1, -1, -1, -1, -1, 0)
> - for Index in range(0, len(Fdf.Profile.PcdDict)):
> - pass
> - for Key in Fdf.Profile.PcdDict.keys():
> - Model = MODEL_PCD
> - Value1 = ''
> - Value2 = ".".join((Key[1], Key[0]))
> - FileName = Fdf.Profile.PcdFileLineDict[Key][0]
> - StartLine = Fdf.Profile.PcdFileLineDict[Key][1]
> - BelongsToFile = self.InsertFile(FileName)
> - self.TblFdf.Insert(Model, Value1, Value2, Value3, Arch,
> BelongsToItem, BelongsToFile, StartLine, StartColumn, EndLine, EndColumn,
> Enabled)
> - for Index in range(0, len(Fdf.Profile.InfList)):
> - Model = MODEL_META_DATA_COMPONENT
> - Value1 = Fdf.Profile.InfList[Index]
> - Value2 = ''
> - FileName = Fdf.Profile.InfFileLineList[Index][0]
> - StartLine = Fdf.Profile.InfFileLineList[Index][1]
> - BelongsToFile = self.InsertFile(FileName)
> - self.TblFdf.Insert(Model, Value1, Value2, Value3, Arch,
> BelongsToItem, BelongsToFile, StartLine, StartColumn, EndLine, EndColumn,
> Enabled)
> -
> -##
> -#
> -# This acts like the main() function for the script, unless it is 'import'ed into
> another
> -# script.
> -#
> -if __name__ == '__main__':
> - pass
> diff --git a/BaseTools/Source/Python/Common/InfClassObject.py
> b/BaseTools/Source/Python/Common/InfClassObject.py
> deleted file mode 100644
> index 7a5ba4eb84ce..000000000000
> --- a/BaseTools/Source/Python/Common/InfClassObject.py
> +++ /dev/null
> @@ -1,1105 +0,0 @@
> -## @file
> -# This file is used to define each component of INF file
> -#
> -# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the
> BSD License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> -##
> -# Import Modules
> -#
> -import Common.LongFilePathOs as os
> -import re
> -import EdkLogger
> -from CommonDataClass.CommonClass import LibraryClassClass
> -from CommonDataClass.ModuleClass import *
> -from String import *
> -from DataType import *
> -from Identification import *
> -from Dictionary import *
> -from BuildToolError import *
> -from Misc import sdict
> -import GlobalData
> -from Table.TableInf import TableInf
> -import Database
> -from Parsing import *
> -from Common.LongFilePathSupport import OpenLongFilePath as open
> -
> -#
> -# Global variable
> -#
> -Section = {TAB_UNKNOWN.upper() : MODEL_UNKNOWN,
> - TAB_INF_DEFINES.upper() : MODEL_META_DATA_HEADER,
> - TAB_BUILD_OPTIONS.upper() : MODEL_META_DATA_BUILD_OPTION,
> - TAB_INCLUDES.upper() : MODEL_EFI_INCLUDE,
> - TAB_LIBRARIES.upper() : MODEL_EFI_LIBRARY_INSTANCE,
> - TAB_LIBRARY_CLASSES.upper() : MODEL_EFI_LIBRARY_CLASS,
> - TAB_PACKAGES.upper() : MODEL_META_DATA_PACKAGE,
> - TAB_NMAKE.upper() : MODEL_META_DATA_NMAKE,
> - TAB_INF_FIXED_PCD.upper() : MODEL_PCD_FIXED_AT_BUILD,
> - TAB_INF_PATCH_PCD.upper() :
> MODEL_PCD_PATCHABLE_IN_MODULE,
> - TAB_INF_FEATURE_PCD.upper() : MODEL_PCD_FEATURE_FLAG,
> - TAB_INF_PCD_EX.upper() : MODEL_PCD_DYNAMIC_EX,
> - TAB_INF_PCD.upper() : MODEL_PCD_DYNAMIC,
> - TAB_SOURCES.upper() : MODEL_EFI_SOURCE_FILE,
> - TAB_GUIDS.upper() : MODEL_EFI_GUID,
> - TAB_PROTOCOLS.upper() : MODEL_EFI_PROTOCOL,
> - TAB_PPIS.upper() : MODEL_EFI_PPI,
> - TAB_DEPEX.upper() : MODEL_EFI_DEPEX,
> - TAB_BINARIES.upper() : MODEL_EFI_BINARY_FILE,
> - TAB_USER_EXTENSIONS.upper() :
> MODEL_META_DATA_USER_EXTENSION
> - }
> -
> -gComponentType2ModuleType = {
> - "LIBRARY" : "BASE",
> - "SECURITY_CORE" : "SEC",
> - "PEI_CORE" : "PEI_CORE",
> - "COMBINED_PEIM_DRIVER" : "PEIM",
> - "PIC_PEIM" : "PEIM",
> - "RELOCATABLE_PEIM" : "PEIM",
> - "PE32_PEIM" : "PEIM",
> - "BS_DRIVER" : "DXE_DRIVER",
> - "RT_DRIVER" : "DXE_RUNTIME_DRIVER",
> - "SAL_RT_DRIVER" : "DXE_SAL_DRIVER",
> - "APPLICATION" : "UEFI_APPLICATION",
> - "LOGO" : "BASE",
> -}
> -
> -gNmakeFlagPattern = re.compile("(?:EBC_)?([A-
> Z]+)_(?:STD_|PROJ_|ARCH_)?FLAGS(?:_DLL|_ASL|_EXE)?", re.UNICODE)
> -gNmakeFlagName2ToolCode = {
> - "C" : "CC",
> - "LIB" : "SLINK",
> - "LINK" : "DLINK",
> -}
> -
> -class InfHeader(ModuleHeaderClass):
> - _Mapping_ = {
> - #
> - # Required Fields
> - #
> - TAB_INF_DEFINES_BASE_NAME : "Name",
> - TAB_INF_DEFINES_FILE_GUID : "Guid",
> - TAB_INF_DEFINES_MODULE_TYPE : "ModuleType",
> - TAB_INF_DEFINES_EFI_SPECIFICATION_VERSION :
> "UefiSpecificationVersion",
> - TAB_INF_DEFINES_UEFI_SPECIFICATION_VERSION :
> "UefiSpecificationVersion",
> - TAB_INF_DEFINES_EDK_RELEASE_VERSION : "EdkReleaseVersion",
> - #
> - # Optional Fields
> - #
> - TAB_INF_DEFINES_INF_VERSION : "InfVersion",
> - TAB_INF_DEFINES_BINARY_MODULE : "BinaryModule",
> - TAB_INF_DEFINES_COMPONENT_TYPE : "ComponentType",
> - TAB_INF_DEFINES_MAKEFILE_NAME : "MakefileName",
> - TAB_INF_DEFINES_BUILD_NUMBER : "BuildNumber",
> - TAB_INF_DEFINES_BUILD_TYPE : "BuildType",
> - TAB_INF_DEFINES_FFS_EXT : "FfsExt",
> - TAB_INF_DEFINES_FV_EXT : "FvExt",
> - TAB_INF_DEFINES_SOURCE_FV : "SourceFv",
> - TAB_INF_DEFINES_VERSION_NUMBER : "VersionNumber",
> - TAB_INF_DEFINES_VERSION_STRING : "VersionString",
> - TAB_INF_DEFINES_VERSION : "Version",
> - TAB_INF_DEFINES_PCD_IS_DRIVER : "PcdIsDriver",
> - TAB_INF_DEFINES_TIANO_EDK_FLASHMAP_H :
> "TianoEdkFlashMap_h",
> - TAB_INF_DEFINES_SHADOW : "Shadow",
> -# TAB_INF_DEFINES_LIBRARY_CLASS : "LibraryClass",
> -# TAB_INF_DEFINES_ENTRY_POINT : "ExternImages",
> -# TAB_INF_DEFINES_UNLOAD_IMAGE : "ExternImages",
> -# TAB_INF_DEFINES_CONSTRUCTOR : ,
> -# TAB_INF_DEFINES_DESTRUCTOR : ,
> -# TAB_INF_DEFINES_DEFINE : "Define",
> -# TAB_INF_DEFINES_SPEC : "Specification",
> -# TAB_INF_DEFINES_CUSTOM_MAKEFILE : "CustomMakefile",
> -# TAB_INF_DEFINES_MACRO :
> - }
> -
> - def __init__(self):
> - ModuleHeaderClass.__init__(self)
> - self.VersionNumber = ''
> - self.VersionString = ''
> - #print self.__dict__
> - def __setitem__(self, key, value):
> - self.__dict__[self._Mapping_[key]] = value
> - def __getitem__(self, key):
> - return self.__dict__[self._Mapping_[key]]
> - ## "in" test support
> - def __contains__(self, key):
> - return key in self._Mapping_
> -
> -## Inf
> -#
> -# This class defined the structure used in Inf object
> -#
> -# @param Ffilename: Input value for Ffilename of Inf file, default is
> None
> -# @param IsMergeAllArches: Input value for IsMergeAllArches
> -# True is to merge all arches
> -# Fales is not to merge all arches
> -# default is False
> -# @param IsToModule: Input value for IsToModule
> -# True is to transfer to ModuleObject automatically
> -# False is not to transfer to ModuleObject automatically
> -# default is False
> -# @param WorkspaceDir: Input value for current workspace directory,
> default is None
> -#
> -# @var Identification: To store value for Identification, it is a structure as
> Identification
> -# @var UserExtensions: To store value for UserExtensions
> -# @var Module: To store value for Module, it is a structure as
> ModuleClass
> -# @var WorkspaceDir: To store value for WorkspaceDir
> -# @var KeyList: To store value for KeyList, a list for all Keys used in Inf
> -#
> -class Inf(object):
> - def __init__(self, Filename=None, IsToDatabase=False,
> IsToModule=False, WorkspaceDir=None, Database=None,
> SupArchList=DataType.ARCH_LIST):
> - self.Identification = Identification()
> - self.Module = ModuleClass()
> - self.UserExtensions = ''
> - self.WorkspaceDir = WorkspaceDir
> - self.SupArchList = SupArchList
> - self.IsToDatabase = IsToDatabase
> -
> - self.Cur = Database.Cur
> - self.TblFile = Database.TblFile
> - self.TblInf = Database.TblInf
> - self.FileID = -1
> - #self.TblInf = TableInf(Database.Cur)
> -
> - self.KeyList = [
> - TAB_SOURCES, TAB_BUILD_OPTIONS, TAB_BINARIES, TAB_INCLUDES,
> TAB_GUIDS,
> - TAB_PROTOCOLS, TAB_PPIS, TAB_LIBRARY_CLASSES, TAB_PACKAGES,
> TAB_LIBRARIES,
> - TAB_INF_FIXED_PCD, TAB_INF_PATCH_PCD,
> TAB_INF_FEATURE_PCD, TAB_INF_PCD,
> - TAB_INF_PCD_EX, TAB_DEPEX, TAB_NMAKE, TAB_INF_DEFINES
> - ]
> - #
> - # Upper all KEYs to ignore case sensitive when parsing
> - #
> - self.KeyList = map(lambda c: c.upper(), self.KeyList)
> -
> - #
> - # Init RecordSet
> - #
> - self.RecordSet = {}
> - for Key in self.KeyList:
> - self.RecordSet[Section[Key]] = []
> -
> - #
> - # Load Inf file if filename is not None
> - #
> - if Filename is not None:
> - self.LoadInfFile(Filename)
> -
> - #
> - # Transfer to Module Object if IsToModule is True
> - #
> - if IsToModule:
> - self.InfToModule()
> -
> - ## Transfer to Module Object
> - #
> - # Transfer all contents of an Inf file to a standard Module Object
> - #
> - def InfToModule(self):
> - #
> - # Init global information for the file
> - #
> - ContainerFile = self.Identification.FileFullPath
> -
> - #
> - # Generate Package Header
> - #
> - self.GenModuleHeader(ContainerFile)
> -
> - #
> - # Generate BuildOptions
> - #
> - self.GenBuildOptions(ContainerFile)
> -
> - #
> - # Generate Includes
> - #
> - self.GenIncludes(ContainerFile)
> -
> - #
> - # Generate Libraries
> - #
> - self.GenLibraries(ContainerFile)
> -
> - #
> - # Generate LibraryClasses
> - #
> - self.GenLibraryClasses(ContainerFile)
> -
> - #
> - # Generate Packages
> - #
> - self.GenPackages(ContainerFile)
> -
> - #
> - # Generate Nmakes
> - #
> - self.GenNmakes(ContainerFile)
> -
> - #
> - # Generate Pcds
> - #
> - self.GenPcds(ContainerFile)
> -
> - #
> - # Generate Sources
> - #
> - self.GenSources(ContainerFile)
> -
> - #
> - # Generate UserExtensions
> - #
> - self.GenUserExtensions(ContainerFile)
> -
> - #
> - # Generate Guids
> - #
> - self.GenGuidProtocolPpis(DataType.TAB_GUIDS, ContainerFile)
> -
> - #
> - # Generate Protocols
> - #
> - self.GenGuidProtocolPpis(DataType.TAB_PROTOCOLS, ContainerFile)
> -
> - #
> - # Generate Ppis
> - #
> - self.GenGuidProtocolPpis(DataType.TAB_PPIS, ContainerFile)
> -
> - #
> - # Generate Depexes
> - #
> - self.GenDepexes(ContainerFile)
> -
> - #
> - # Generate Binaries
> - #
> - self.GenBinaries(ContainerFile)
> -
> - ## Parse [Defines] section
> - #
> - # Parse [Defines] section into InfDefines object
> - #
> - # @param InfFile The path of the INF file
> - # @param Section The title of "Defines" section
> - # @param Lines The content of "Defines" section
> - #
> - def ParseDefines(self, InfFile, Section, Lines):
> - TokenList = Section.split(TAB_SPLIT)
> - if len(TokenList) == 3:
> - RaiseParserError(Section, "Defines", InfFile, "[xx.yy.%s] format (with
> platform) is not supported")
> - if len(TokenList) == 2:
> - Arch = TokenList[1].upper()
> - else:
> - Arch = TAB_ARCH_COMMON
> -
> - if Arch not in self.Defines:
> - self.Defines[Arch] = InfDefines()
> - GetSingleValueOfKeyFromLines(Lines,
> self.Defines[Arch].DefinesDictionary,
> - TAB_COMMENT_SPLIT, TAB_EQUAL_SPLIT, False, None)
> -
> - ## Load Inf file
> - #
> - # Load the file if it exists
> - #
> - # @param Filename: Input value for filename of Inf file
> - #
> - def LoadInfFile(self, Filename):
> - #
> - # Insert a record for file
> - #
> - Filename = NormPath(Filename)
> - self.Identification.FileFullPath = Filename
> - (self.Identification.FileRelativePath, self.Identification.FileName) =
> os.path.split(Filename)
> - self.FileID = self.TblFile.InsertFile(Filename, MODEL_FILE_INF)
> -
> - #
> - # Init InfTable
> - #
> - #self.TblInf.Table = "Inf%s" % self.FileID
> - #self.TblInf.Create()
> -
> - #
> - # Init common datas
> - #
> - IfDefList, SectionItemList, CurrentSection, ArchList, ThirdList,
> IncludeFiles = \
> - [], [], TAB_UNKNOWN, [], [], []
> - LineNo = 0
> -
> - #
> - # Parse file content
> - #
> - IsFindBlockComment = False
> - ReservedLine = ''
> - for Line in open(Filename, 'r'):
> - LineNo = LineNo + 1
> - #
> - # Remove comment block
> - #
> - if Line.find(TAB_COMMENT_EDK_START) > -1:
> - ReservedLine = GetSplitList(Line, TAB_COMMENT_EDK_START, 1)[0]
> - IsFindBlockComment = True
> - if Line.find(TAB_COMMENT_EDK_END) > -1:
> - Line = ReservedLine + GetSplitList(Line, TAB_COMMENT_EDK_END,
> 1)[1]
> - ReservedLine = ''
> - IsFindBlockComment = False
> - if IsFindBlockComment:
> - continue
> -
> - #
> - # Remove comments at tail and remove spaces again
> - #
> - Line = CleanString(Line)
> - if Line == '':
> - continue
> -
> - #
> - # Find a new section tab
> - # First insert previous section items
> - # And then parse the content of the new section
> - #
> - if Line.startswith(TAB_SECTION_START) and
> Line.endswith(TAB_SECTION_END):
> - if Line[1:3] == "--":
> - continue
> - Model = Section[CurrentSection.upper()]
> - #
> - # Insert items data of previous section
> - #
> - InsertSectionItemsIntoDatabase(self.TblInf, self.FileID, Filename,
> Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList,
> self.RecordSet)
> - #
> - # Parse the new section
> - #
> - SectionItemList = []
> - ArchList = []
> - ThirdList = []
> -
> - CurrentSection = ''
> - LineList = GetSplitValueList(Line[len(TAB_SECTION_START):len(Line)
> - len(TAB_SECTION_END)], TAB_COMMA_SPLIT)
> - for Item in LineList:
> - ItemList = GetSplitValueList(Item, TAB_SPLIT)
> - if CurrentSection == '':
> - CurrentSection = ItemList[0]
> - else:
> - if CurrentSection != ItemList[0]:
> - EdkLogger.error("Parser", PARSER_ERROR, "Different section
> names '%s' and '%s' are found in one section definition, this is not allowed."
> % (CurrentSection, ItemList[0]), File=Filename, Line=LineNo,
> RaiseError=EdkLogger.IsRaiseError)
> - if CurrentSection.upper() not in self.KeyList:
> - RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
> - CurrentSection = TAB_UNKNOWN
> - continue
> - ItemList.append('')
> - ItemList.append('')
> - if len(ItemList) > 5:
> - RaiseParserError(Line, CurrentSection, Filename, '', LineNo)
> - else:
> - if ItemList[1] != '' and ItemList[1].upper() not in
> ARCH_LIST_FULL:
> - EdkLogger.error("Parser", PARSER_ERROR, "Invalid Arch
> definition '%s' found" % ItemList[1], File=Filename, Line=LineNo,
> RaiseError=EdkLogger.IsRaiseError)
> - ArchList.append(ItemList[1].upper())
> - ThirdList.append(ItemList[2])
> -
> - continue
> -
> - #
> - # Not in any defined section
> - #
> - if CurrentSection == TAB_UNKNOWN:
> - ErrorMsg = "%s is not in any defined section" % Line
> - EdkLogger.error("Parser", PARSER_ERROR, ErrorMsg, File=Filename,
> Line=LineNo, RaiseError=EdkLogger.IsRaiseError)
> -
> - #
> - # Add a section item
> - #
> - SectionItemList.append([Line, LineNo])
> - # End of parse
> - #End of For
> -
> - #
> - # Insert items data of last section
> - #
> - Model = Section[CurrentSection.upper()]
> - InsertSectionItemsIntoDatabase(self.TblInf, self.FileID, Filename,
> Model, CurrentSection, SectionItemList, ArchList, ThirdList, IfDefList,
> self.RecordSet)
> -
> - #
> - # Replace all DEFINE macros with its actual values
> - #
> - ParseDefineMacro2(self.TblInf, self.RecordSet,
> GlobalData.gGlobalDefines)
> -
> - ## Show detailed information of Module
> - #
> - # Print all members and their values of Module class
> - #
> - def ShowModule(self):
> - M = self.Module
> - for Arch in M.Header.keys():
> - print '\nArch =', Arch
> - print 'Filename =', M.Header[Arch].FileName
> - print 'FullPath =', M.Header[Arch].FullPath
> - print 'BaseName =', M.Header[Arch].Name
> - print 'Guid =', M.Header[Arch].Guid
> - print 'Version =', M.Header[Arch].Version
> - print 'InfVersion =', M.Header[Arch].InfVersion
> - print 'UefiSpecificationVersion =',
> M.Header[Arch].UefiSpecificationVersion
> - print 'EdkReleaseVersion =', M.Header[Arch].EdkReleaseVersion
> - print 'ModuleType =', M.Header[Arch].ModuleType
> - print 'BinaryModule =', M.Header[Arch].BinaryModule
> - print 'ComponentType =', M.Header[Arch].ComponentType
> - print 'MakefileName =', M.Header[Arch].MakefileName
> - print 'BuildNumber =', M.Header[Arch].BuildNumber
> - print 'BuildType =', M.Header[Arch].BuildType
> - print 'FfsExt =', M.Header[Arch].FfsExt
> - print 'FvExt =', M.Header[Arch].FvExt
> - print 'SourceFv =', M.Header[Arch].SourceFv
> - print 'PcdIsDriver =', M.Header[Arch].PcdIsDriver
> - print 'TianoEdkFlashMap_h =', M.Header[Arch].TianoEdkFlashMap_h
> - print 'Shadow =', M.Header[Arch].Shadow
> - print 'LibraryClass =', M.Header[Arch].LibraryClass
> - for Item in M.Header[Arch].LibraryClass:
> - print Item.LibraryClass,
> DataType.TAB_VALUE_SPLIT.join(Item.SupModuleList)
> - print 'CustomMakefile =', M.Header[Arch].CustomMakefile
> - print 'Define =', M.Header[Arch].Define
> - print 'Specification =', M.Header[Arch].Specification
> - for Item in self.Module.ExternImages:
> - print '\nEntry_Point = %s, UnloadImage = %s' %
> (Item.ModuleEntryPoint, Item.ModuleUnloadImage)
> - for Item in self.Module.ExternLibraries:
> - print 'Constructor = %s, Destructor = %s' % (Item.Constructor,
> Item.Destructor)
> - print '\nBuildOptions =', M.BuildOptions
> - for Item in M.BuildOptions:
> - print Item.ToolChainFamily, Item.ToolChain, Item.Option,
> Item.SupArchList
> - print '\nIncludes =', M.Includes
> - for Item in M.Includes:
> - print Item.FilePath, Item.SupArchList
> - print '\nLibraries =', M.Libraries
> - for Item in M.Libraries:
> - print Item.Library, Item.SupArchList
> - print '\nLibraryClasses =', M.LibraryClasses
> - for Item in M.LibraryClasses:
> - print Item.LibraryClass, Item.RecommendedInstance,
> Item.FeatureFlag, Item.SupModuleList, Item.SupArchList, Item.Define
> - print '\nPackageDependencies =', M.PackageDependencies
> - for Item in M.PackageDependencies:
> - print Item.FilePath, Item.SupArchList, Item.FeatureFlag
> - print '\nNmake =', M.Nmake
> - for Item in M.Nmake:
> - print Item.Name, Item.Value, Item.SupArchList
> - print '\nPcds =', M.PcdCodes
> - for Item in M.PcdCodes:
> - print '\tCName=', Item.CName, 'TokenSpaceGuidCName=',
> Item.TokenSpaceGuidCName, 'DefaultValue=', Item.DefaultValue,
> 'ItemType=', Item.ItemType, Item.SupArchList
> - print '\nSources =', M.Sources
> - for Source in M.Sources:
> - print Source.SourceFile, 'Fam=', Source.ToolChainFamily, 'Pcd=',
> Source.FeatureFlag, 'Tag=', Source.TagName, 'ToolCode=', Source.ToolCode,
> Source.SupArchList
> - print '\nUserExtensions =', M.UserExtensions
> - for UserExtension in M.UserExtensions:
> - print UserExtension.UserID, UserExtension.Identifier,
> UserExtension.Content
> - print '\nGuids =', M.Guids
> - for Item in M.Guids:
> - print Item.CName, Item.SupArchList, Item.FeatureFlag
> - print '\nProtocols =', M.Protocols
> - for Item in M.Protocols:
> - print Item.CName, Item.SupArchList, Item.FeatureFlag
> - print '\nPpis =', M.Ppis
> - for Item in M.Ppis:
> - print Item.CName, Item.SupArchList, Item.FeatureFlag
> - print '\nDepex =', M.Depex
> - for Item in M.Depex:
> - print Item.Depex, Item.SupArchList, Item.Define
> - print '\nBinaries =', M.Binaries
> - for Binary in M.Binaries:
> - print 'Type=', Binary.FileType, 'Target=', Binary.Target, 'Name=',
> Binary.BinaryFile, 'FeatureFlag=', Binary.FeatureFlag, 'SupArchList=',
> Binary.SupArchList
> -
> - ## Convert [Defines] section content to ModuleHeaderClass
> - #
> - # Convert [Defines] section content to ModuleHeaderClass
> - #
> - # @param Defines The content under [Defines] section
> - # @param ModuleHeader An object of ModuleHeaderClass
> - # @param Arch The supported ARCH
> - #
> - def GenModuleHeader(self, ContainerFile):
> - EdkLogger.debug(2, "Generate ModuleHeader ...")
> - File = self.Identification.FileFullPath
> - #
> - # Update all defines item in database
> - #
> - RecordSet = self.RecordSet[MODEL_META_DATA_HEADER]
> - for Record in RecordSet:
> - ValueList = GetSplitValueList(Record[0], TAB_EQUAL_SPLIT)
> - if len(ValueList) != 2:
> - RaiseParserError(Record[0], 'Defines', ContainerFile, '<Key> =
> <Value>', Record[2])
> - ID, Value1, Value2, Arch, LineNo = Record[3], ValueList[0],
> ValueList[1], Record[1], Record[2]
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
> - where ID = %s""" % (self.TblInf.Table,
> ConvertToSqlString2(Value1), ConvertToSqlString2(Value2), ID)
> - self.TblInf.Exec(SqlCommand)
> -
> - for Arch in DataType.ARCH_LIST:
> - ModuleHeader = InfHeader()
> - ModuleHeader.FileName = self.Identification.FileName
> - ModuleHeader.FullPath = self.Identification.FileFullPath
> - DefineList = QueryDefinesItem2(self.TblInf, Arch, self.FileID)
> -
> - NotProcessedDefineList = []
> - for D in DefineList:
> - if D[0] in ModuleHeader:
> - ModuleHeader[D[0]] = GetSplitValueList(D[1])[0]
> - else:
> - NotProcessedDefineList.append(D)
> -
> - if ModuleHeader.ComponentType == "LIBRARY":
> - Lib = LibraryClassClass()
> - Lib.LibraryClass = ModuleHeader.Name
> - Lib.SupModuleList = DataType.SUP_MODULE_LIST
> - ModuleHeader.LibraryClass.append(Lib)
> -
> - # we need to make some key defines resolved first
> - for D in NotProcessedDefineList:
> - if D[0] == TAB_INF_DEFINES_LIBRARY_CLASS:
> - List = GetSplitValueList(D[1], DataType.TAB_VALUE_SPLIT, 1)
> - Lib = LibraryClassClass()
> - Lib.LibraryClass = CleanString(List[0])
> - if len(List) == 1:
> - Lib.SupModuleList = DataType.SUP_MODULE_LIST
> - elif len(List) == 2:
> - Lib.SupModuleList = GetSplitValueList(CleanString(List[1]), ' ')
> - ModuleHeader.LibraryClass.append(Lib)
> - elif D[0] == TAB_INF_DEFINES_CUSTOM_MAKEFILE:
> - List = D[1].split(DataType.TAB_VALUE_SPLIT)
> - if len(List) == 2:
> - ModuleHeader.CustomMakefile[CleanString(List[0])] =
> CleanString(List[1])
> - else:
> - RaiseParserError(D[1], 'CUSTOM_MAKEFILE of Defines', File,
> 'CUSTOM_MAKEFILE=<Family>|<Filename>', D[2])
> - elif D[0] == TAB_INF_DEFINES_ENTRY_POINT:
> - Image = ModuleExternImageClass()
> - Image.ModuleEntryPoint = CleanString(D[1])
> - self.Module.ExternImages.append(Image)
> - elif D[0] == TAB_INF_DEFINES_UNLOAD_IMAGE:
> - Image = ModuleExternImageClass()
> - Image.ModuleUnloadImage = CleanString(D[1])
> - self.Module.ExternImages.append(Image)
> - elif D[0] == TAB_INF_DEFINES_CONSTRUCTOR:
> - LibraryClass = ModuleExternLibraryClass()
> - LibraryClass.Constructor = CleanString(D[1])
> - self.Module.ExternLibraries.append(LibraryClass)
> - elif D[0] == TAB_INF_DEFINES_DESTRUCTOR:
> - LibraryClass = ModuleExternLibraryClass()
> - LibraryClass.Destructor = CleanString(D[1])
> - self.Module.ExternLibraries.append(LibraryClass)
> - elif D[0] == TAB_INF_DEFINES_DEFINE:
> - List = D[1].split(DataType.TAB_EQUAL_SPLIT)
> - if len(List) != 2:
> - RaiseParserError(Item, 'DEFINE of Defines', File, 'DEFINE <Word>
> = <Word>', D[2])
> - else:
> - ModuleHeader.Define[CleanString(List[0])] =
> CleanString(List[1])
> - elif D[0] == TAB_INF_DEFINES_SPEC:
> - List = D[1].split(DataType.TAB_EQUAL_SPLIT)
> - if len(List) != 2:
> - RaiseParserError(Item, 'SPEC of Defines', File, 'SPEC <Word> =
> <Version>', D[2])
> - else:
> - ModuleHeader.Specification[CleanString(List[0])] =
> CleanString(List[1])
> -
> - #
> - # Get version of INF
> - #
> - if ModuleHeader.InfVersion != "":
> - # EdkII inf
> - VersionNumber = ModuleHeader.VersionNumber
> - VersionString = ModuleHeader.VersionString
> - if len(VersionNumber) > 0 and len(VersionString) == 0:
> - EdkLogger.warn(2000, 'VERSION_NUMBER depricated; INF file %s
> should be modified to use VERSION_STRING instead.' %
> self.Identification.FileFullPath)
> - ModuleHeader.Version = VersionNumber
> - if len(VersionString) > 0:
> - if len(VersionNumber) > 0:
> - EdkLogger.warn(2001, 'INF file %s defines both
> VERSION_NUMBER and VERSION_STRING, using VERSION_STRING' %
> self.Identification.FileFullPath)
> - ModuleHeader.Version = VersionString
> - else:
> - # Edk inf
> - ModuleHeader.InfVersion = "0x00010000"
> - if ModuleHeader.ComponentType in
> gComponentType2ModuleType:
> - ModuleHeader.ModuleType =
> gComponentType2ModuleType[ModuleHeader.ComponentType]
> - elif ModuleHeader.ComponentType != '':
> - EdkLogger.error("Parser", PARSER_ERROR, "Unsupported Edk
> component type [%s]" % ModuleHeader.ComponentType, ExtraData=File,
> RaiseError=EdkLogger.IsRaiseError)
> -
> - self.Module.Header[Arch] = ModuleHeader
> -
> -
> - ## GenBuildOptions
> - #
> - # Gen BuildOptions of Inf
> - # [<Family>:]<ToolFlag>=Flag
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenBuildOptions(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_BUILD_OPTIONS)
> - BuildOptions = {}
> - #
> - # Get all BuildOptions
> - #
> - RecordSet = self.RecordSet[MODEL_META_DATA_BUILD_OPTION]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (Family, ToolChain, Flag) = GetBuildOption(Record[0],
> ContainerFile, Record[2])
> - MergeArches(BuildOptions, (Family, ToolChain, Flag), Arch)
> - #
> - # Update to Database
> - #
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s',
> Value3 = '%s'
> - where ID = %s""" % (self.TblInf.Table,
> ConvertToSqlString2(Family), ConvertToSqlString2(ToolChain),
> ConvertToSqlString2(Flag), Record[3])
> - self.TblInf.Exec(SqlCommand)
> -
> - for Key in BuildOptions.keys():
> - BuildOption = BuildOptionClass(Key[0], Key[1], Key[2])
> - BuildOption.SupArchList = BuildOptions[Key]
> - self.Module.BuildOptions.append(BuildOption)
> -
> - ## GenIncludes
> - #
> - # Gen Includes of Inf
> - #
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenIncludes(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_INCLUDES)
> - Includes = sdict()
> - #
> - # Get all Includes
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_INCLUDE]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - MergeArches(Includes, Record[0], Arch)
> -
> - for Key in Includes.keys():
> - Include = IncludeClass()
> - Include.FilePath = NormPath(Key)
> - Include.SupArchList = Includes[Key]
> - self.Module.Includes.append(Include)
> -
> - ## GenLibraries
> - #
> - # Gen Libraries of Inf
> - #
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenLibraries(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARIES)
> - Libraries = sdict()
> - #
> - # Get all Includes
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_LIBRARY_INSTANCE]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - MergeArches(Libraries, Record[0], Arch)
> -
> - for Key in Libraries.keys():
> - Library = ModuleLibraryClass()
> - # replace macro and remove file extension
> - Library.Library = Key.rsplit('.', 1)[0]
> - Library.SupArchList = Libraries[Key]
> - self.Module.Libraries.append(Library)
> -
> - ## GenLibraryClasses
> - #
> - # Get LibraryClass of Inf
> - # <LibraryClassKeyWord>|<LibraryInstance>
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenLibraryClasses(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_LIBRARY_CLASSES)
> - LibraryClasses = {}
> - #
> - # Get all LibraryClasses
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_LIBRARY_CLASS]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (LibClassName, LibClassIns, Pcd, SupModelList) =
> GetLibraryClassOfInf([Record[0], Record[4]], ContainerFile,
> self.WorkspaceDir, Record[2])
> - MergeArches(LibraryClasses, (LibClassName, LibClassIns, Pcd,
> SupModelList), Arch)
> - #
> - # Update to Database
> - #
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s',
> Value3 = '%s'
> - where ID = %s""" % (self.TblInf.Table,
> ConvertToSqlString2(LibClassName), ConvertToSqlString2(LibClassIns),
> ConvertToSqlString2(SupModelList), Record[3])
> - self.TblInf.Exec(SqlCommand)
> -
> - for Key in LibraryClasses.keys():
> - KeyList = Key[0].split(DataType.TAB_VALUE_SPLIT)
> - LibraryClass = LibraryClassClass()
> - LibraryClass.LibraryClass = Key[0]
> - LibraryClass.RecommendedInstance = NormPath(Key[1])
> - LibraryClass.FeatureFlag = Key[2]
> - LibraryClass.SupArchList = LibraryClasses[Key]
> - LibraryClass.SupModuleList = GetSplitValueList(Key[3])
> - self.Module.LibraryClasses.append(LibraryClass)
> -
> - ## GenPackages
> - #
> - # Gen Packages of Inf
> - #
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenPackages(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_PACKAGES)
> - Packages = {}
> - #
> - # Get all Packages
> - #
> - RecordSet = self.RecordSet[MODEL_META_DATA_PACKAGE]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (Package, Pcd) = GetPackage(Record[0], ContainerFile,
> self.WorkspaceDir, Record[2])
> - MergeArches(Packages, (Package, Pcd), Arch)
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
> - where ID = %s""" % (self.TblInf.Table,
> ConvertToSqlString2(Package), ConvertToSqlString2(Pcd), Record[3])
> - self.TblInf.Exec(SqlCommand)
> -
> -
> - for Key in Packages.keys():
> - Package = ModulePackageDependencyClass()
> - Package.FilePath = NormPath(Key[0])
> - Package.SupArchList = Packages[Key]
> - Package.FeatureFlag = Key[1]
> - self.Module.PackageDependencies.append(Package)
> -
> - ## GenNmakes
> - #
> - # Gen Nmakes of Inf
> - #
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenNmakes(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_NMAKE)
> - Nmakes = sdict()
> - #
> - # Get all Nmakes
> - #
> - RecordSet = self.RecordSet[MODEL_META_DATA_NMAKE]
> -
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - MergeArches(Nmakes, Record[0], Arch)
> -
> - for Key in Nmakes.keys():
> - List = GetSplitValueList(Key, DataType.TAB_EQUAL_SPLIT, MaxSplit=1)
> - if len(List) != 2:
> - RaiseParserError(Key, 'Nmake', ContainerFile, '<MacroName> =
> <Value>')
> - continue
> - Nmake = ModuleNmakeClass()
> - Nmake.Name = List[0]
> - Nmake.Value = List[1]
> - Nmake.SupArchList = Nmakes[Key]
> - self.Module.Nmake.append(Nmake)
> -
> - # convert Edk format to EdkII format
> - if Nmake.Name == "IMAGE_ENTRY_POINT":
> - Image = ModuleExternImageClass()
> - Image.ModuleEntryPoint = Nmake.Value
> - self.Module.ExternImages.append(Image)
> - elif Nmake.Name == "DPX_SOURCE":
> - Source = ModuleSourceFileClass(NormPath(Nmake.Value), "", "",
> "", "", Nmake.SupArchList)
> - self.Module.Sources.append(Source)
> - else:
> - ToolList = gNmakeFlagPattern.findall(Nmake.Name)
> - if len(ToolList) == 0 or len(ToolList) != 1:
> - EdkLogger.warn("\nParser", "Don't know how to do with MACRO:
> %s" % Nmake.Name,
> - ExtraData=ContainerFile)
> - else:
> - if ToolList[0] in gNmakeFlagName2ToolCode:
> - Tool = gNmakeFlagName2ToolCode[ToolList[0]]
> - else:
> - Tool = ToolList[0]
> - BuildOption = BuildOptionClass("MSFT", "*_*_*_%s_FLAGS" %
> Tool, Nmake.Value)
> - BuildOption.SupArchList = Nmake.SupArchList
> - self.Module.BuildOptions.append(BuildOption)
> -
> - ## GenPcds
> - #
> - # Gen Pcds of Inf
> - # <TokenSpaceGuidCName>.<PcdCName>[|<Value>]
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenPcds(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_PCDS)
> - Pcds = {}
> - PcdToken = {}
> -
> - #
> - # Get all Guids
> - #
> - RecordSet1 = self.RecordSet[MODEL_PCD_FIXED_AT_BUILD]
> - RecordSet2 = self.RecordSet[MODEL_PCD_PATCHABLE_IN_MODULE]
> - RecordSet3 = self.RecordSet[MODEL_PCD_FEATURE_FLAG]
> - RecordSet4 = self.RecordSet[MODEL_PCD_DYNAMIC_EX]
> - RecordSet5 = self.RecordSet[MODEL_PCD_DYNAMIC]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet1:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - if self.Module.Header[Arch].LibraryClass != {}:
> - pass
> - (TokenGuidCName, TokenName, Value, Type) =
> GetPcdOfInf(Record[0], TAB_PCDS_FIXED_AT_BUILD, ContainerFile,
> Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet2:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, Type) =
> GetPcdOfInf(Record[0], TAB_PCDS_PATCHABLE_IN_MODULE, ContainerFile,
> Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet3:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, Type) =
> GetPcdOfInf(Record[0], TAB_PCDS_FEATURE_FLAG, ContainerFile,
> Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet4:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, Type) =
> GetPcdOfInf(Record[0], TAB_PCDS_DYNAMIC_EX, ContainerFile, Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - for Record in RecordSet5:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (TokenGuidCName, TokenName, Value, Type) =
> GetPcdOfInf(Record[0], "", ContainerFile, Record[2])
> - MergeArches(Pcds, (TokenGuidCName, TokenName, Value,
> Type), Arch)
> - PcdToken[Record[3]] = (TokenGuidCName, TokenName)
> - #
> - # Update to database
> - #
> - if self.IsToDatabase:
> - for Key in PcdToken.keys():
> - SqlCommand = """update %s set Value2 = '%s' where ID = %s""" %
> (self.TblInf.Table, ".".join((PcdToken[Key][0], PcdToken[Key][1])), Key)
> - self.TblInf.Exec(SqlCommand)
> -
> - for Key in Pcds.keys():
> - Pcd = PcdClass()
> - Pcd.CName = Key[1]
> - Pcd.TokenSpaceGuidCName = Key[0]
> - Pcd.DefaultValue = Key[2]
> - Pcd.ItemType = Key[3]
> - Pcd.SupArchList = Pcds[Key]
> - self.Module.PcdCodes.append(Pcd)
> -
> - ## GenSources
> - #
> - # Gen Sources of Inf
> - #
> <Filename>[|<Family>[|<TagName>[|<ToolCode>[|<PcdFeatureFlag>]]]]
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenSources(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_SOURCES)
> - Sources = {}
> -
> - #
> - # Get all Nmakes
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_SOURCE_FILE]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (Filename, Family, TagName, ToolCode, Pcd) =
> GetSource(Record[0], ContainerFile, self.Identification.FileRelativePath,
> Record[2])
> - MergeArches(Sources, (Filename, Family, TagName, ToolCode,
> Pcd), Arch)
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s',
> Value3 = '%s', Value4 = '%s', Value5 = '%s'
> - where ID = %s""" % (self.TblInf.Table,
> ConvertToSqlString2(Filename), ConvertToSqlString2(Family),
> ConvertToSqlString2(TagName), ConvertToSqlString2(ToolCode),
> ConvertToSqlString2(Pcd), Record[3])
> - self.TblInf.Exec(SqlCommand)
> -
> - for Key in Sources.keys():
> - Source = ModuleSourceFileClass(Key[0], Key[2], Key[3], Key[1],
> Key[4], Sources[Key])
> - self.Module.Sources.append(Source)
> -
> - ## GenUserExtensions
> - #
> - # Gen UserExtensions of Inf
> - #
> - def GenUserExtensions(self, ContainerFile):
> -# #
> -# # UserExtensions
> -# #
> -# if self.UserExtensions != '':
> -# UserExtension = UserExtensionsClass()
> -# Lines = self.UserExtensions.splitlines()
> -# List = GetSplitValueList(Lines[0], DataType.TAB_SPLIT, 2)
> -# if len(List) != 3:
> -# RaiseParserError(Lines[0], 'UserExtensions', File,
> "UserExtensions.UserId.'Identifier'")
> -# else:
> -# UserExtension.UserID = List[1]
> -# UserExtension.Identifier = List[2][0:-1].replace("'", '').replace('\"',
> '')
> -# for Line in Lines[1:]:
> -# UserExtension.Content = UserExtension.Content +
> CleanString(Line) + '\n'
> -# self.Module.UserExtensions.append(UserExtension)
> - pass
> -
> - ## GenDepexes
> - #
> - # Gen Depex of Inf
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenDepexes(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_DEPEX)
> - Depex = {}
> - #
> - # Get all Depexes
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_DEPEX]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - Line = ''
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - Line = Line + Record[0] + ' '
> - if Line != '':
> - MergeArches(Depex, Line, Arch)
> -
> - for Key in Depex.keys():
> - Dep = ModuleDepexClass()
> - Dep.Depex = Key
> - Dep.SupArchList = Depex[Key]
> - self.Module.Depex.append(Dep)
> -
> - ## GenBinaries
> - #
> - # Gen Binary of Inf
> - #
> <FileType>|<Filename>|<Target>[|<TokenSpaceGuidCName>.<PcdCName
> >]
> - #
> - # @param ContainerFile: The Dec file full path
> - #
> - def GenBinaries(self, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % TAB_BINARIES)
> - Binaries = {}
> -
> - #
> - # Get all Guids
> - #
> - RecordSet = self.RecordSet[MODEL_EFI_BINARY_FILE]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (FileType, Filename, Target, Pcd) = GetBinary(Record[0],
> ContainerFile, self.Identification.FileRelativePath, Record[2])
> - MergeArches(Binaries, (FileType, Filename, Target, Pcd), Arch)
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s',
> Value3 = '%s', Value4 = '%s'
> - where ID = %s""" % (self.TblInf.Table,
> ConvertToSqlString2(FileType), ConvertToSqlString2(Filename),
> ConvertToSqlString2(Target), ConvertToSqlString2(Pcd), Record[3])
> - self.TblInf.Exec(SqlCommand)
> -
> - for Key in Binaries.keys():
> - Binary = ModuleBinaryFileClass(NormPath(Key[1]), Key[0], Key[2],
> Key[3], Binaries[Key])
> - self.Module.Binaries.append(Binary)
> -
> - ## GenGuids
> - #
> - # Gen Guids of Inf
> - # <CName>=<GuidValue>
> - #
> - # @param ContainerFile: The Inf file full path
> - #
> - def GenGuidProtocolPpis(self, Type, ContainerFile):
> - EdkLogger.debug(2, "Generate %s ..." % Type)
> - Lists = {}
> - #
> - # Get all Items
> - #
> - RecordSet = self.RecordSet[Section[Type.upper()]]
> -
> - #
> - # Go through each arch
> - #
> - for Arch in self.SupArchList:
> - for Record in RecordSet:
> - if Record[1] == Arch or Record[1] == TAB_ARCH_COMMON:
> - (Name, Value) = GetGuidsProtocolsPpisOfInf(Record[0], Type,
> ContainerFile, Record[2])
> - MergeArches(Lists, (Name, Value), Arch)
> - if self.IsToDatabase:
> - SqlCommand = """update %s set Value1 = '%s', Value2 = '%s'
> - where ID = %s""" % (self.TblInf.Table,
> ConvertToSqlString2(Name), ConvertToSqlString2(Value), Record[3])
> - self.TblInf.Exec(SqlCommand)
> -
> - ListMember = None
> - if Type == TAB_GUIDS:
> - ListMember = self.Module.Guids
> - elif Type == TAB_PROTOCOLS:
> - ListMember = self.Module.Protocols
> - elif Type == TAB_PPIS:
> - ListMember = self.Module.Ppis
> -
> - for Key in Lists.keys():
> - ListClass = GuidProtocolPpiCommonClass()
> - ListClass.CName = Key[0]
> - ListClass.SupArchList = Lists[Key]
> - ListClass.FeatureFlag = Key[1]
> - ListMember.append(ListClass)
> -
> -##
> -#
> -# This acts like the main() function for the script, unless it is 'import'ed into
> another
> -# script.
> -#
> -if __name__ == '__main__':
> - EdkLogger.Initialize()
> - EdkLogger.SetLevel(EdkLogger.DEBUG_0)
> -
> - W = os.getenv('WORKSPACE')
> - F = os.path.join(W,
> 'MdeModulePkg/Application/HelloWorld/HelloWorld.inf')
> -
> - Db = Database.Database('Inf.db')
> - Db.InitDatabase()
> -
> - P = Inf(os.path.normpath(F), True, True, W, Db)
> - P.ShowModule()
> -
> - Db.Close()
> --
> 2.16.2.windows.1
next prev parent reply other threads:[~2018-04-10 6:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-04 15:01 [PATCH v1 0/2] BaseTools: remove files not needed Jaben Carsey
2018-04-04 15:01 ` [PATCH v1 1/2] BaseTools: copy a dictionary from InfClassObject to BuildReport Jaben Carsey
2018-04-10 6:32 ` Zhu, Yonghong
2018-04-04 15:01 ` [PATCH v1 2/2] BaseTools: Remove unneeded files Jaben Carsey
2018-04-08 8:16 ` Zhu, Yonghong
2018-04-09 21:11 ` Carsey, Jaben
2018-04-10 0:35 ` Zhu, Yonghong
2018-04-10 6:39 ` Zhu, Yonghong [this message]
2018-04-10 14:26 ` Carsey, Jaben
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B9726D6DCCFB8B4CA276A9169B02216D51FDCA14@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox