From: "Zhu, Yonghong" <yonghong.zhu@intel.com>
To: Tim Lewis <tim.lewis@insyde.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Subject: Re: FFS Alignment and the FDF Specification
Date: Fri, 27 Jul 2018 00:59:26 +0000 [thread overview]
Message-ID: <B9726D6DCCFB8B4CA276A9169B02216D520C5C14@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <06fb01d42544$6cbc7180$46355480$@insyde.com>
Which version of FDF spec you use now ? I remember current we already support 16M ffs alignment. FDF spec Version 1.28 have such info "Per PI 1.6 to extend FFS alignment to 16M".
Best Regards,
Zhu Yonghong
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Tim Lewis
Sent: Friday, July 27, 2018 8:55 AM
To: edk2-devel@lists.01.org
Subject: [edk2] FFS Alignment and the FDF Specification
Is my understanding correct: the FDF specification only supports a maximum of 64KB alignment for files (section 2.5.6), but the PI specification supports (table 7), up to 16MB alignment. Or am I misreading it?
Thanks,
Tim
-----Original Message-----
From: edk2-devel <edk2-devel-bounces@lists.01.org> On Behalf Of Andrew Fish
Sent: Thursday, July 19, 2018 11:26 AM
To: Marvin H?user <Marvin.Haeuser@outlook.com>
Cc: edk2-devel@lists.01.org
Subject: Re: [edk2] Help on AutoGen Files
Udit,
As Marvin points out the [LibraryClasses] section of the INF file are going to imply the order of the library constructor calls in the AutoGen
Worst case you can demote FpgaInterfaceInit () from being a constructor to just being a public library function that the other lib can call explicitly from its constructor. Maybe that is too drastic and you could must move a function out of FpgaInterfaceInit () and make that function part of the Public library interface?
Thanks,
Andrew Fish
> On Jul 19, 2018, at 11:14 AM, Marvin H?user
> <Marvin.Haeuser@outlook.com>
wrote:
>
> Hey Udit,
>
> You cannot explicitly influence the order of the calls, but implicitly
> via
the dependency tree, which means you need to make SerialPortLib depend on your LibraryClass instance.
> You did not mention which SerialPortLib instance you use, but probably
> you
need to execute FpgaInterfaceInit() earlier in platform code or fork SerialPortLib for now.
>
> Regards,
> Marvin
>
>> -----Original Message-----
>> From: edk2-devel <edk2-devel-bounces@lists.01.org> On Behalf Of Udit
>> Kumar
>> Sent: Thursday, July 19, 2018 9:33 AM
>> To: edk2-devel@lists.01.org
>> Subject: [edk2] Help on AutoGen Files
>>
>> Hi Experts,
>> How I can change the order of initialization in Constructor list of
autogen file.
>> In my build system, if I look at
>> MdeModulePkg/Universal/PCD/Pei/Pcd/DEBUG/AutoGen.c
>> Below is function of Library Constructor List
>>
>> VOID
>> EFIAPI
>> ProcessLibraryConstructorList (
>> IN EFI_PEI_FILE_HANDLE FileHandle,
>> IN CONST EFI_PEI_SERVICES **PeiServices
>> )
>> {
>> EFI_STATUS Status;
>>
>> Status = BaseDebugLibSerialPortConstructor (); ASSERT_EFI_ERROR
>> (Status);
>>
>> Status = PeiServicesTablePointerLibConstructor (FileHandle,
>> PeiServices); ASSERT_EFI_ERROR (Status);
>>
>> Status = TimerConstructor ();
>> ASSERT_EFI_ERROR (Status);
>>
>> Status = FpgaInterfaceInit ();
>> ASSERT_EFI_ERROR (Status);
>>
>> }
>>
>>
>> My problem is SerialPortConstructor needs frequency, which can be
>> retrieved after FpgaInterfaceInit() Therefore, my preferred way for
>> this constructor list will be
>> FpgaInterfaceInit() followed by BaseDebugLibSerialPortConstructor()
>>
>> how I can achieve this.
>>
>>
>> Many Thanks
>> Udit
>> _______________________________________________
>> edk2-devel mailing list
>> edk2-devel@lists.01.org
>> https://lists.01.org/mailman/listinfo/edk2-devel
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2018-07-27 0:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-27 0:54 FFS Alignment and the FDF Specification Tim Lewis
2018-07-27 0:59 ` Zhu, Yonghong [this message]
2018-07-27 1:08 ` Tim Lewis
2018-07-27 1:32 ` Zhu, Yonghong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B9726D6DCCFB8B4CA276A9169B02216D520C5C14@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox