* [Patch] BaseTools: refactor the error for PCD value is negative or exceed max
@ 2018-09-29 3:08 Yonghong Zhu
2018-09-30 1:49 ` Zhu, Yonghong
0 siblings, 1 reply; 2+ messages in thread
From: Yonghong Zhu @ 2018-09-29 3:08 UTC (permalink / raw)
To: edk2-devel; +Cc: zhijufan, Liming Gao
From: zhijufan <zhijux.fan@intel.com>
refactor the error handling for the PCD value that is negative or it
exceed the max value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
---
BaseTools/Source/Python/AutoGen/GenC.py | 57 ++++++++-------------------------
BaseTools/Source/Python/BPDG/GenVpd.py | 44 ++++++++-----------------
BaseTools/Source/Python/Common/Misc.py | 4 +++
3 files changed, 30 insertions(+), 75 deletions(-)
diff --git a/BaseTools/Source/Python/AutoGen/GenC.py b/BaseTools/Source/Python/AutoGen/GenC.py
index f455f83..09626d0 100644
--- a/BaseTools/Source/Python/AutoGen/GenC.py
+++ b/BaseTools/Source/Python/AutoGen/GenC.py
@@ -1013,54 +1013,23 @@ def CreateModulePcdCode(Info, AutoGenC, AutoGenH, Pcd):
ValueNumber = int (Value, 0)
except:
EdkLogger.error("build", AUTOGEN_ERROR,
"PCD value is not valid dec or hex number for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
ExtraData="[%s]" % str(Info))
- if Pcd.DatumType == TAB_UINT64:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x10000000000000000:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('ULL'):
- Value += 'ULL'
- elif Pcd.DatumType == TAB_UINT32:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x100000000:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('U'):
- Value += 'U'
- elif Pcd.DatumType == TAB_UINT16:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x10000:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('U'):
- Value += 'U'
- elif Pcd.DatumType == TAB_UINT8:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x100:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('U'):
- Value += 'U'
+ if ValueNumber < 0:
+ EdkLogger.error("build", AUTOGEN_ERROR,
+ "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
+ ExtraData="[%s]" % str(Info))
+ elif ValueNumber > MAX_VAL_TYPE[Pcd.DatumType]:
+ EdkLogger.error("build", AUTOGEN_ERROR,
+ "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
+ ExtraData="[%s]" % str(Info))
+ if Pcd.DatumType == TAB_UINT64 and not Value.endswith('ULL'):
+ Value += 'ULL'
+ elif Pcd.DatumType != TAB_UINT64 and not Value.endswith('U'):
+ Value += 'U'
+
if Pcd.DatumType not in TAB_PCD_NUMERIC_TYPES:
if not Pcd.MaxDatumSize:
EdkLogger.error("build", AUTOGEN_ERROR,
"Unknown [MaxDatumSize] of PCD [%s.%s]" % (Pcd.TokenSpaceGuidCName, TokenCName),
ExtraData="[%s]" % str(Info))
diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py b/BaseTools/Source/Python/BPDG/GenVpd.py
index c5e91a3..d7852d2 100644
--- a/BaseTools/Source/Python/BPDG/GenVpd.py
+++ b/BaseTools/Source/Python/BPDG/GenVpd.py
@@ -19,10 +19,11 @@ from io import BytesIO
from . import StringTable as st
import array
import re
from Common.LongFilePathSupport import OpenLongFilePath as open
from struct import *
+from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE
import Common.EdkLogger as EdkLogger
import Common.BuildToolError as BuildToolError
_FORMAT_CHAR = {1: 'B',
2: 'H',
@@ -123,41 +124,22 @@ class PcdEntry:
def _PackIntValue(self, IntValue, Size):
if Size not in _FORMAT_CHAR:
EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
"Invalid size %d for PCD %s in integer datum size(File: %s Line: %s)." % (Size, self.PcdCName, self.FileName, self.Lineno))
- if Size == 1:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT8 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x100:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT8 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif Size == 2:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT16 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x10000:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT16 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif Size == 4:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT32 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x100000000:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT32 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif Size == 8:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT32 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x10000000000000000:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT32 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- else:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Invalid size %d for PCD %s in integer datum size(File: %s Line: %s)." % (Size, self.PcdCName, self.FileName, self.Lineno))
+ for Type, MaxSize in MAX_SIZE_TYPE.items():
+ if Type == 'BOOLEAN':
+ continue
+ if Size == MaxSize:
+ if IntValue < 0:
+ EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
+ "PCD can't be set to negative value %d for PCD %s in %s datum type(File: %s Line: %s)." % (
+ IntValue, self.PcdCName, Type, self.FileName, self.Lineno))
+ elif IntValue > MAX_VAL_TYPE[Type]:
+ EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
+ "Too large PCD value %d for datum type %s for PCD %s(File: %s Line: %s)." % (
+ IntValue, Type, self.PcdCName, self.FileName, self.Lineno))
try:
self.PcdValue = pack(_FORMAT_CHAR[Size], IntValue)
except:
EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
diff --git a/BaseTools/Source/Python/Common/Misc.py b/BaseTools/Source/Python/Common/Misc.py
index fb6a844..0efd8b0 100644
--- a/BaseTools/Source/Python/Common/Misc.py
+++ b/BaseTools/Source/Python/Common/Misc.py
@@ -1587,12 +1587,16 @@ def CheckPcdDatum(Type, Value):
elif Type == 'BOOLEAN':
if Value not in ['TRUE', 'True', 'true', '0x1', '0x01', '1', 'FALSE', 'False', 'false', '0x0', '0x00', '0']:
return False, "Invalid value [%s] of type [%s]; must be one of TRUE, True, true, 0x1, 0x01, 1"\
", FALSE, False, false, 0x0, 0x00, 0" % (Value, Type)
elif Type in [TAB_UINT8, TAB_UINT16, TAB_UINT32, TAB_UINT64]:
+ if Value and int(Value, 0) < 0:
+ return False, "PCD can't be set to negative value[%s] for datum type [%s]" % (Value, Type)
try:
Value = long(Value, 0)
+ if Value > MAX_VAL_TYPE[Type]:
+ return False, "Too large PCD value[%s] for datum type [%s]" % (Value, Type)
except:
return False, "Invalid value [%s] of type [%s];"\
" must be a hexadecimal, decimal or octal in C language format." % (Value, Type)
else:
return True, "StructurePcd"
--
2.6.1.windows.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [Patch] BaseTools: refactor the error for PCD value is negative or exceed max
2018-09-29 3:08 [Patch] BaseTools: refactor the error for PCD value is negative or exceed max Yonghong Zhu
@ 2018-09-30 1:49 ` Zhu, Yonghong
0 siblings, 0 replies; 2+ messages in thread
From: Zhu, Yonghong @ 2018-09-30 1:49 UTC (permalink / raw)
To: Zhu, Yonghong, edk2-devel@lists.01.org; +Cc: Gao, Liming, Zhu, Yonghong
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Best Regards,
Zhu Yonghong
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Yonghong Zhu
Sent: Saturday, September 29, 2018 11:08 AM
To: edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>
Subject: [edk2] [Patch] BaseTools: refactor the error for PCD value is negative or exceed max
From: zhijufan <zhijux.fan@intel.com>
refactor the error handling for the PCD value that is negative or it exceed the max value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
---
BaseTools/Source/Python/AutoGen/GenC.py | 57 ++++++++------------------------- BaseTools/Source/Python/BPDG/GenVpd.py | 44 ++++++++----------------- BaseTools/Source/Python/Common/Misc.py | 4 +++
3 files changed, 30 insertions(+), 75 deletions(-)
diff --git a/BaseTools/Source/Python/AutoGen/GenC.py b/BaseTools/Source/Python/AutoGen/GenC.py
index f455f83..09626d0 100644
--- a/BaseTools/Source/Python/AutoGen/GenC.py
+++ b/BaseTools/Source/Python/AutoGen/GenC.py
@@ -1013,54 +1013,23 @@ def CreateModulePcdCode(Info, AutoGenC, AutoGenH, Pcd):
ValueNumber = int (Value, 0)
except:
EdkLogger.error("build", AUTOGEN_ERROR,
"PCD value is not valid dec or hex number for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
ExtraData="[%s]" % str(Info))
- if Pcd.DatumType == TAB_UINT64:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x10000000000000000:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('ULL'):
- Value += 'ULL'
- elif Pcd.DatumType == TAB_UINT32:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x100000000:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('U'):
- Value += 'U'
- elif Pcd.DatumType == TAB_UINT16:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x10000:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('U'):
- Value += 'U'
- elif Pcd.DatumType == TAB_UINT8:
- if ValueNumber < 0:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- elif ValueNumber >= 0x100:
- EdkLogger.error("build", AUTOGEN_ERROR,
- "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
- ExtraData="[%s]" % str(Info))
- if not Value.endswith('U'):
- Value += 'U'
+ if ValueNumber < 0:
+ EdkLogger.error("build", AUTOGEN_ERROR,
+ "PCD can't be set to negative value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
+ ExtraData="[%s]" % str(Info))
+ elif ValueNumber > MAX_VAL_TYPE[Pcd.DatumType]:
+ EdkLogger.error("build", AUTOGEN_ERROR,
+ "Too large PCD value for datum type [%s] of PCD %s.%s" % (Pcd.DatumType, Pcd.TokenSpaceGuidCName, TokenCName),
+ ExtraData="[%s]" % str(Info))
+ if Pcd.DatumType == TAB_UINT64 and not Value.endswith('ULL'):
+ Value += 'ULL'
+ elif Pcd.DatumType != TAB_UINT64 and not Value.endswith('U'):
+ Value += 'U'
+
if Pcd.DatumType not in TAB_PCD_NUMERIC_TYPES:
if not Pcd.MaxDatumSize:
EdkLogger.error("build", AUTOGEN_ERROR,
"Unknown [MaxDatumSize] of PCD [%s.%s]" % (Pcd.TokenSpaceGuidCName, TokenCName),
ExtraData="[%s]" % str(Info)) diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py b/BaseTools/Source/Python/BPDG/GenVpd.py
index c5e91a3..d7852d2 100644
--- a/BaseTools/Source/Python/BPDG/GenVpd.py
+++ b/BaseTools/Source/Python/BPDG/GenVpd.py
@@ -19,10 +19,11 @@ from io import BytesIO from . import StringTable as st import array import re from Common.LongFilePathSupport import OpenLongFilePath as open from struct import *
+from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE
import Common.EdkLogger as EdkLogger
import Common.BuildToolError as BuildToolError
_FORMAT_CHAR = {1: 'B',
2: 'H',
@@ -123,41 +124,22 @@ class PcdEntry:
def _PackIntValue(self, IntValue, Size):
if Size not in _FORMAT_CHAR:
EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
"Invalid size %d for PCD %s in integer datum size(File: %s Line: %s)." % (Size, self.PcdCName, self.FileName, self.Lineno))
- if Size == 1:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT8 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x100:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT8 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif Size == 2:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT16 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x10000:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT16 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif Size == 4:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT32 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x100000000:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT32 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif Size == 8:
- if IntValue < 0:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "PCD can't be set to negative value %d for PCD %s in UINT32 datum type(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- elif IntValue >= 0x10000000000000000:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Too large PCD value %d for datum type UINT32 for PCD %s(File: %s Line: %s)." % (IntValue, self.PcdCName, self.FileName, self.Lineno))
- else:
- EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
- "Invalid size %d for PCD %s in integer datum size(File: %s Line: %s)." % (Size, self.PcdCName, self.FileName, self.Lineno))
+ for Type, MaxSize in MAX_SIZE_TYPE.items():
+ if Type == 'BOOLEAN':
+ continue
+ if Size == MaxSize:
+ if IntValue < 0:
+ EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
+ "PCD can't be set to negative value %d for PCD %s in %s datum type(File: %s Line: %s)." % (
+ IntValue, self.PcdCName, Type, self.FileName, self.Lineno))
+ elif IntValue > MAX_VAL_TYPE[Type]:
+ EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
+ "Too large PCD value %d for datum type %s for PCD %s(File: %s Line: %s)." % (
+ IntValue, Type, self.PcdCName,
+ self.FileName, self.Lineno))
try:
self.PcdValue = pack(_FORMAT_CHAR[Size], IntValue)
except:
EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID, diff --git a/BaseTools/Source/Python/Common/Misc.py b/BaseTools/Source/Python/Common/Misc.py
index fb6a844..0efd8b0 100644
--- a/BaseTools/Source/Python/Common/Misc.py
+++ b/BaseTools/Source/Python/Common/Misc.py
@@ -1587,12 +1587,16 @@ def CheckPcdDatum(Type, Value):
elif Type == 'BOOLEAN':
if Value not in ['TRUE', 'True', 'true', '0x1', '0x01', '1', 'FALSE', 'False', 'false', '0x0', '0x00', '0']:
return False, "Invalid value [%s] of type [%s]; must be one of TRUE, True, true, 0x1, 0x01, 1"\
", FALSE, False, false, 0x0, 0x00, 0" % (Value, Type)
elif Type in [TAB_UINT8, TAB_UINT16, TAB_UINT32, TAB_UINT64]:
+ if Value and int(Value, 0) < 0:
+ return False, "PCD can't be set to negative value[%s] for
+ datum type [%s]" % (Value, Type)
try:
Value = long(Value, 0)
+ if Value > MAX_VAL_TYPE[Type]:
+ return False, "Too large PCD value[%s] for datum type
+ [%s]" % (Value, Type)
except:
return False, "Invalid value [%s] of type [%s];"\
" must be a hexadecimal, decimal or octal in C language format." % (Value, Type)
else:
return True, "StructurePcd"
--
2.6.1.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-09-30 1:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-09-29 3:08 [Patch] BaseTools: refactor the error for PCD value is negative or exceed max Yonghong Zhu
2018-09-30 1:49 ` Zhu, Yonghong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox