public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Zhu, Yonghong" <yonghong.zhu@intel.com>
To: "Carsey, Jaben" <jaben.carsey@intel.com>,
	"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Gao, Liming" <liming.gao@intel.com>,
	"Zhu, Yonghong" <yonghong.zhu@intel.com>
Subject: Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
Date: Tue, 4 Dec 2018 01:52:50 +0000	[thread overview]
Message-ID: <B9726D6DCCFB8B4CA276A9169B02216D521846B4@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <CB6E33457884FA40993F35157061515CA716388B@FMSMSX103.amr.corp.intel.com>

Yes.  I prefer not to change it.

Best Regards,
Zhu Yonghong


-----Original Message-----
From: Carsey, Jaben 
Sent: Monday, December 03, 2018 11:19 PM
To: Zhu, Yonghong <yonghong.zhu@intel.com>; edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>
Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'

I was trying to change all use of *, without regard to the usage of it.

Do you think that mathematical * should not be changed?

-Jaben

> -----Original Message-----
> From: Zhu, Yonghong
> Sent: Sunday, December 02, 2018 6:31 PM
> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong 
> <yonghong.zhu@intel.com>
> Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard 
> shared variable for '*'
> Importance: High
> 
> Hi Jaben,
> 
> In this patch, it also changed the mathematics multiplicative '*' 
> (used in
> expression) to  TAB_STAR, is it by on purpose?
> Eg:
> -    NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<',
> '?', ':']
> +    NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', 
> + '~', '<<', '>>', '!', '=',
> '>', '<', '?', ':']
> 
> Best Regards,
> Zhu Yonghong
> 
> -----Original Message-----
> From: Carsey, Jaben
> Sent: Friday, November 16, 2018 11:40 PM
> To: edk2-devel@lists.01.org
> Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming 
> <liming.gao@intel.com>
> Subject: [Patch v1 1/1] BaseTools: create and use a standard shared 
> variable for '*'
> 
> add a variable for the string '*' and then use it instead of lots of '*'
> 
> Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> ---
>  BaseTools/Source/Python/AutoGen/AutoGen.py             | 54 ++++++++++---
> -------
>  BaseTools/Source/Python/AutoGen/BuildEngine.py         | 10 ++--
>  BaseTools/Source/Python/BPDG/GenVpd.py                 | 14 ++---
>  BaseTools/Source/Python/Common/DataType.py             |  1 +
>  BaseTools/Source/Python/Common/Expression.py           |  4 +-
>  BaseTools/Source/Python/Common/Misc.py                 |  2 +-
>  BaseTools/Source/Python/Common/ToolDefClassObject.py   | 23 +++++----
>  BaseTools/Source/Python/Common/VpdInfoFile.py          |  8 +--
>  BaseTools/Source/Python/GenFds/FdfParser.py            |  5 +-
>  BaseTools/Source/Python/GenFds/GenFds.py               |  2 +-
>  BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py |  8 +--
>  BaseTools/Source/Python/GenFds/Section.py              |  2 +-
>  BaseTools/Source/Python/Workspace/DscBuildData.py      |  6 +--
>  13 files changed, 70 insertions(+), 69 deletions(-)
> 
> diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py
> b/BaseTools/Source/Python/AutoGen/AutoGen.py
> index f3560bfc787d..25417c447061 100644
> --- a/BaseTools/Source/Python/AutoGen/AutoGen.py
> +++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
> @@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
>                          PcdValue = Sku.DefaultValue
>                          if PcdValue == "":
>                              PcdValue  = Pcd.DefaultValue
> -                        if Sku.VpdOffset != '*':
> +                        if Sku.VpdOffset != TAB_STAR:
>                              if PcdValue.startswith("{"):
>                                  Alignment = 8
>                              elif PcdValue.startswith("L"):
> @@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
>                              VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
>                          SkuValueMap[PcdValue].append(Sku)
>                          # if the offset of a VPD is *, then it need 
> to be fixed up by third party tool.
> -                        if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> +                        if not NeedProcessVpdMapFile and 
> + Sku.VpdOffset ==
> TAB_STAR:
>                              NeedProcessVpdMapFile = True
>                              if self.Platform.VpdToolGuid is None or 
> self.Platform.VpdToolGuid == '':
>                                  EdkLogger.error("Build", 
> FILE_NOT_FOUND, \ @@ -1522,7
> +1522,7 @@ class PlatformAutoGen(AutoGen):
>                                  PcdValue = Sku.DefaultValue
>                                  if PcdValue == "":
>                                      PcdValue  = DscPcdEntry.DefaultValue
> -                                if Sku.VpdOffset != '*':
> +                                if Sku.VpdOffset != TAB_STAR:
>                                      if PcdValue.startswith("{"):
>                                          Alignment = 8
>                                      elif PcdValue.startswith("L"):
> @@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
>                                      SkuValueMap[PcdValue] = []
>                                      VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
>                                  SkuValueMap[PcdValue].append(Sku)
> -                                if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> +                                if not NeedProcessVpdMapFile and 
> + Sku.VpdOffset ==
> TAB_STAR:
>                                      NeedProcessVpdMapFile = True
>                              if DscPcdEntry.DatumType == TAB_VOID and
> PcdValue.startswith("L"):
>                                  UnicodePcdArray.add(DscPcdEntry) @@ 
> -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
>                      if os.path.exists(VpdMapFilePath):
>                          VpdFile.Read(VpdMapFilePath)
> 
> -                        # Fixup "*" offset
> +                        # Fixup TAB_STAR offset
>                          for pcd in VpdSkuMap:
>                              vpdinfo = VpdFile.GetVpdInfo(pcd)
>                              if vpdinfo is None:
> @@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
>      def CalculatePriorityValue(self, Key):
>          Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
>          PriorityValue = 0x11111
> -        if Target == "*":
> +        if Target == TAB_STAR:
>              PriorityValue &= 0x01111
> -        if ToolChain == "*":
> +        if ToolChain == TAB_STAR:
>              PriorityValue &= 0x10111
> -        if Arch == "*":
> +        if Arch == TAB_STAR:
>              PriorityValue &= 0x11011
> -        if CommandType == "*":
> +        if CommandType == TAB_STAR:
>              PriorityValue &= 0x11101
> -        if Attr == "*":
> +        if Attr == TAB_STAR:
>              PriorityValue &= 0x11110
> 
>          return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9 
> +2253,9 @@ class PlatformAutoGen(AutoGen):
>              if (Key[0] == self.BuildRuleFamily and
>                  (ModuleStyle is None or len(Key) < 3 or (len(Key) > 2 
> and Key[2] ==
> ModuleStyle))):
>                  Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
> -                if (Target == self.BuildTarget or Target == "*") and\
> -                    (ToolChain == self.ToolChain or ToolChain == "*") and\
> -                    (Arch == self.Arch or Arch == "*") and\
> +                if (Target == self.BuildTarget or Target == TAB_STAR) and\
> +                    (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
> +                    (Arch == self.Arch or Arch == TAB_STAR) and\
>                      Options[Key].startswith("="):
> 
>                      if OverrideList.get(Key[1]) is not None:
> @@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
>                      # Compare two Key, if one is included by another, 
> choose the higher priority one
>                      #
>                      Target2, ToolChain2, Arch2, CommandType2, Attr2 =
> NextKey.split("_")
> -                    if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
> -                        (ToolChain1 == ToolChain2 or ToolChain1 == "*" or ToolChain2
> == "*") and\
> -                        (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
> -                        (CommandType1 == CommandType2 or CommandType1 == "*"
> or CommandType2 == "*") and\
> -                        (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
> +                    if (Target1 == Target2 or Target1 == TAB_STAR or 
> + Target2 ==
> TAB_STAR) and\
> +                        (ToolChain1 == ToolChain2 or ToolChain1 == 
> + TAB_STAR or
> ToolChain2 == TAB_STAR) and\
> +                        (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2 
> + == TAB_STAR)
> and\
> +                        (CommandType1 == CommandType2 or CommandType1 
> + ==
> TAB_STAR or CommandType2 == TAB_STAR) and\
> +                        (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
> 
>                          if self.CalculatePriorityValue(NowKey) >
> self.CalculatePriorityValue(NextKey):
>                              if Options.get((self.BuildRuleFamily, NextKey)) is not None:
> @@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
>                      continue
>                  FamilyMatch = True
>              # expand any wildcard
> -            if Target == "*" or Target == self.BuildTarget:
> -                if Tag == "*" or Tag == self.ToolChain:
> -                    if Arch == "*" or Arch == self.Arch:
> +            if Target == TAB_STAR or Target == self.BuildTarget:
> +                if Tag == TAB_STAR or Tag == self.ToolChain:
> +                    if Arch == TAB_STAR or Arch == self.Arch:
>                          if Tool not in BuildOptions:
>                              BuildOptions[Tool] = {}
>                          if Attr != "FLAGS" or Attr not in 
> BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
>                  continue
> 
>              # expand any wildcard
> -            if Target == "*" or Target == self.BuildTarget:
> -                if Tag == "*" or Tag == self.ToolChain:
> -                    if Arch == "*" or Arch == self.Arch:
> +            if Target == TAB_STAR or Target == self.BuildTarget:
> +                if Tag == TAB_STAR or Tag == self.ToolChain:
> +                    if Arch == TAB_STAR or Arch == self.Arch:
>                          if Tool not in BuildOptions:
>                              BuildOptions[Tool] = {}
>                          if Attr != "FLAGS" or Attr not in 
> BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
>      @cached_property
>      def SourceFileList(self):
>          RetVal = []
> -        ToolChainTagSet = {"", "*", self.ToolChain}
> -        ToolChainFamilySet = {"", "*", self.ToolChainFamily,
> self.BuildRuleFamily}
> +        ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
> +        ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily, 
> + self.BuildRuleFamily}
>          for F in self.Module.Sources:
>              # match tool chain
>              if F.TagName not in ToolChainTagSet:
> @@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
>      def BinaryFileList(self):
>          RetVal = []
>          for F in self.Module.Binaries:
> -            if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target !=
> self.BuildTarget:
> +            if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and 
> + F.Target !=
> self.BuildTarget:
>                  continue
>              RetVal.append(F)
>              self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal) 
> diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> index ac7a6687552c..f9e3ac3a1daf 100644
> --- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> +++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> @@ -110,7 +110,7 @@ class FileBuildRule:
>          self.IncListFileMacro = self.INC_LIST_MACRO
> 
>          self.SourceFileType = Type
> -        # source files listed not in "*" or "?" pattern format
> +        # source files listed not in TAB_STAR or "?" pattern format
>          if not ExtraDependency:
>              self.ExtraSourceFileList = []
>          else:
> @@ -150,12 +150,12 @@ class FileBuildRule:
>          self.SourceFileExtList = set()
>          for File in Input:
>              Base, Ext = os.path.splitext(File)
> -            if Base.find("*") >= 0:
> -                # There's "*" in the file name
> +            if Base.find(TAB_STAR) >= 0:
> +                # There's TAB_STAR in the file name
>                  self.IsMultipleInput = True
>                  self.GenFileListMacro = True
>              elif Base.find("?") < 0:
> -                # There's no "*" and "?" in file name
> +                # There's no TAB_STAR and "?" in file name
>                  self.ExtraSourceFileList.append(File)
>                  continue
>              self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@ class BuildRule:
>      #
>      #   @param  FileExt             The extension of a file
>      #   @param  ToolChainFamily     The tool chain family name
> -    #   @param  BuildVersion        The build version number. "*" means any
> rule
> +    #   @param  BuildVersion        The build version number. TAB_STAR means
> any rule
>      #                               is applicalbe.
>      #
>      #   @retval FileType        The file type string
> diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py
> b/BaseTools/Source/Python/BPDG/GenVpd.py
> index d7852d29eed0..e5da47f95e63 100644
> --- a/BaseTools/Source/Python/BPDG/GenVpd.py
> +++ b/BaseTools/Source/Python/BPDG/GenVpd.py
> @@ -21,7 +21,7 @@ import array
>  import re
>  from Common.LongFilePathSupport import OpenLongFilePath as open  from 
> struct import * -from Common.DataType import MAX_SIZE_TYPE, 
> MAX_VAL_TYPE
> +from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE,
> TAB_STAR
>  import Common.EdkLogger as EdkLogger
>  import Common.BuildToolError as BuildToolError
> 
> @@ -87,7 +87,7 @@ class PcdEntry:
>      #  for both hexadecimal and decimal.
>      #
>      def _GenOffsetValue(self):
> -        if self.PcdOffset != "*" :
> +        if self.PcdOffset != TAB_STAR:
>              try:
>                  self.PcdBinOffset = int (self.PcdOffset)
>              except:
> @@ -423,7 +423,7 @@ class GenVPD :
>                      Alignment = 1
> 
>                  PCD.Alignment = Alignment
> -                if PCD.PcdOffset != '*':
> +                if PCD.PcdOffset != TAB_STAR:
>                      if PCD.PcdOccupySize % Alignment != 0:
>                          if PCD.PcdUnpackValue.startswith("{"):
>                              EdkLogger.warn("BPDG", "The offset value 
> of PCD %s is not 8- byte aligned!" %(PCD.PcdCName), 
> File=self.InputFileName) @@ -469,7
> +469,7 @@ class GenVPD :
>      def FormatFileLine (self) :
> 
>          for eachPcd in self.FileLinesList :
> -            if eachPcd.PcdOffset != '*' :
> +            if eachPcd.PcdOffset != TAB_STAR :
>                  # Use pcd's Offset value as key, and pcd's Value as value
>                  self.PcdFixedOffsetSizeList.append(eachPcd)
>              else :
> @@ -484,7 +484,7 @@ class GenVPD :
>      def FixVpdOffset (self):
>          # At first, the offset should start at 0
>          # Sort fixed offset list in order to find out where has free 
> spaces for the pcd's offset
> -        # value is "*" to insert into.
> +        # value is TAB_STAR to insert into.
> 
>          self.PcdFixedOffsetSizeList.sort(key=lambda x: 
> x.PcdBinOffset)
> 
> @@ -502,7 +502,7 @@ class GenVPD :
>                          self.PcdUnknownOffsetList[index+i -1 ], 
> self.PcdUnknownOffsetList[index+i] = 
> self.PcdUnknownOffsetList[index+i],
> self.PcdUnknownOffsetList[index+i -1]
> 
>          #
> -        # Process all Offset value are "*"
> +        # Process all Offset value are TAB_STAR
>          #
>          if (len(self.PcdFixedOffsetSizeList) == 0) and
> (len(self.PcdUnknownOffsetList) != 0) :
>              # The offset start from 0 @@ -571,7 +571,7 @@ class 
> GenVPD :
>                          eachUnfixedPcd      =
> self.PcdUnknownOffsetList[countOfUnfixedList]
>                          needFixPcdSize      = eachUnfixedPcd.PcdOccupySize
>                          # Not been fixed
> -                        if eachUnfixedPcd.PcdOffset == '*' :
> +                        if eachUnfixedPcd.PcdOffset == TAB_STAR :
>                              if LastOffset % eachUnfixedPcd.Alignment != 0:
>                                  LastOffset = (LastOffset / 
> eachUnfixedPcd.Alignment + 1) * eachUnfixedPcd.Alignment
>                              # The offset un-fixed pcd can write into 
> this free space diff -- git 
> a/BaseTools/Source/Python/Common/DataType.py
> b/BaseTools/Source/Python/Common/DataType.py
> index 1d1d22faa40b..6b375712b65e 100644
> --- a/BaseTools/Source/Python/Common/DataType.py
> +++ b/BaseTools/Source/Python/Common/DataType.py
> @@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
>  TAB_OPTION_END = '>'
>  TAB_SLASH = '\\'
>  TAB_BACK_SLASH = '/'
> +TAB_STAR = '*'
>  TAB_LINE_BREAK = '\n'
>  TAB_PRINTCHAR_VT = '\x0b'
>  TAB_PRINTCHAR_BS = '\b'
> diff --git a/BaseTools/Source/Python/Common/Expression.py
> b/BaseTools/Source/Python/Common/Expression.py
> index a21ab5daa73e..db1310d534fb 100644
> --- a/BaseTools/Source/Python/Common/Expression.py
> +++ b/BaseTools/Source/Python/Common/Expression.py
> @@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
>          'IN' : 'in'
>      }
> 
> -    NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<',
> '?', ':']
> +    NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', 
> + '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
> 
> 
>      SymbolPattern = re.compile("("
> @@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
> 
>      # A [ * B]*
>      def _MulExpr(self):
> -        return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
> +        return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR, 
> + "/",
> + "%"})
> 
>      # [!]*A
>      def _UnaryExpr(self):
> diff --git a/BaseTools/Source/Python/Common/Misc.py
> b/BaseTools/Source/Python/Common/Misc.py
> index 3b8efb2e7179..61ba79241fb6 100644
> --- a/BaseTools/Source/Python/Common/Misc.py
> +++ b/BaseTools/Source/Python/Common/Misc.py
> @@ -1088,7 +1088,7 @@ class tdict:
>      _ListType = type([])
>      _TupleType = type(())
>      _Wildcard = 'COMMON'
> -    _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
> +    _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR, 
> + 'PLATFORM']
> 
>      def __init__(self, _Single_=False, _Level_=2):
>          self._Level_ = _Level_
> diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> index 05a1ddfbcc89..186d279840c1 100644
> --- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> +++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> @@ -29,7 +29,8 @@ from Common import GlobalData  from 
> Common.MultipleWorkspace import MultipleWorkspace as mws  from 
> .DataType import TAB_TOD_DEFINES_TARGET, 
> TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
>                       TAB_TOD_DEFINES_TARGET_ARCH, 
> TAB_TOD_DEFINES_COMMAND_TYPE\
> -                     , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY
> +                     , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY,\
> +                     TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
> 
> 
>  ##
> @@ -97,7 +98,7 @@ class ToolDefClassObject(object):
>              # adding/removing items from the original dict.
>              for Key in list(self.ToolsDefTxtDictionary.keys()):
>                  List = Key.split('_')
> -                if List[Index] == '*':
> +                if List[Index] == TAB_STAR:
>                      for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
>                          List[Index] = String
>                          NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@ 
> -202,20 +203,20 @@ class ToolDefClassObject(object):
>              if len(List) != 5:
>                  EdkLogger.verbose("Line %d: Not a valid name of 
> definition: %s" % ((Index + 1), Name))
>                  continue
> -            elif List[4] == '*':
> +            elif List[4] == TAB_STAR:
>                  EdkLogger.verbose("Line %d: '*' is not allowed in 
> last field: %s" % ((Index + 1), Name))
>                  continue
>              else:
>                  self.ToolsDefTxtDictionary[Name] = Value
> -                if List[0] != '*':
> +                if List[0] != TAB_STAR:
>                      self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET] 
> += [List[0]]
> -                if List[1] != '*':
> +                if List[1] != TAB_STAR:
>                      
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]
> += [List[1]]
> -                if List[2] != '*':
> +                if List[2] != TAB_STAR:
>                      
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] += [List[2]]
> -                if List[3] != '*':
> +                if List[3] != TAB_STAR:
>                      
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE]
> += [List[3]]
> -                if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and List[3]
> == '*':
> +                if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == 
> + TAB_STAR
> and List[3] == TAB_STAR:
>                      if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
>                          self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
>                          
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] = Value @@ -226,7 +227,7 @@ class ToolDefClassObject(object):
> 
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] = 
> Value
>                      elif 
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]]
> != Value:
>                          EdkLogger.verbose("Line %d: No override 
> allowed for the family of a tool chain: %s" % ((Index + 1), Name))
> -                if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == '*'
> and List[3] == '*':
> +                if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and 
> + List[2] ==
> TAB_STAR and List[3] == TAB_STAR:
>                      if TAB_TOD_DEFINES_BUILDRULEFAMILY not in 
> self.ToolsDefTxtDatabase \
>                         or List[1] not in
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
>                          EdkLogger.verbose("Line %d: The family is not 
> specified, but BuildRuleFamily is specified for the tool chain: %s" % 
> ((Index + 1), Name)) @@ -270,8 +271,8 @@ class ToolDefClassObject(object):
>  def ToolDefDict(ConfDir):
>      Target = TargetTxtDict(ConfDir)
>      ToolDef = ToolDefClassObject()
> -    if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> Target.TargetTxtDictionary:
> -        ToolsDefFile =
> Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CON
> F]
> +    if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
> +        ToolsDefFile =
> + Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
>          if ToolsDefFile:
>              ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
>          else:
> diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py
> b/BaseTools/Source/Python/Common/VpdInfoFile.py
> index 2fb8e66fe99c..3be0670e36fb 100644
> --- a/BaseTools/Source/Python/Common/VpdInfoFile.py
> +++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
> @@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
>  #  <PcdName>         ::=  <TokenSpaceCName> "." <PcdCName>
>  #  <TokenSpaceCName> ::=  C Variable Name of the Token Space GUID
>  #  <PcdCName>        ::=  C Variable Name of the PCD
> -#  <Offset>          ::=  {"*"} {<HexNumber>}
> +#  <Offset>          ::=  {TAB_STAR} {<HexNumber>}
>  #  <HexNumber>       ::=  "0x" (a-fA-F0-9){1,8}
>  #  <Size>            ::=  <HexNumber>
>  #  <Value>           ::=  {<HexNumber>} {<NonNegativeInt>} {<QString>}
> {<Array>}
> @@ -92,7 +92,7 @@ class VpdInfoFile:
>          if (Vpd is None):
>              EdkLogger.error("VpdInfoFile", 
> BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
> 
> -        if not (Offset >= 0 or Offset == "*"):
> +        if not (Offset >= 0 or Offset == TAB_STAR):
>              EdkLogger.error("VpdInfoFile", 
> BuildToolError.PARAMETER_INVALID, "Invalid offset parameter: %s." % 
> Offset)
> 
>          if Vpd.DatumType == TAB_VOID:
> @@ -186,8 +186,8 @@ class VpdInfoFile:
>                          VpdObjectTokenCName = PcdItem[0]
>                  for sku in VpdObject.SkuInfoList:
>                      if VpdObject.TokenSpaceGuidCName == 
> TokenSpaceName and VpdObjectTokenCName == PcdTokenName.strip() and sku == SkuId:
> -                        if self._VpdArray[VpdObject][sku] == "*":
> -                            if Offset == "*":
> +                        if self._VpdArray[VpdObject][sku] == TAB_STAR:
> +                            if Offset == TAB_STAR:
>                                  EdkLogger.error("BPDG", 
> BuildToolError.FORMAT_INVALID, "The offset of %s has not been fixed up 
> by third-party BPDG tool." %
> PcdName)
>                              self._VpdArray[VpdObject][sku] = Offset
>                          Found = True
> diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py
> b/BaseTools/Source/Python/GenFds/FdfParser.py
> index 44cc8f63d07b..cedc4ea0c122 100644
> --- a/BaseTools/Source/Python/GenFds/FdfParser.py
> +++ b/BaseTools/Source/Python/GenFds/FdfParser.py
> @@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
>  T_CHAR_TAB = '\t'
>  T_CHAR_DOUBLE_QUOTE = '\"'
>  T_CHAR_SINGLE_QUOTE = '\''
> -T_CHAR_STAR = '*'
>  T_CHAR_BRACE_R = '}'
> 
>  SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT, TAB_COMMA_SPLIT, '{', 
> T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class
> FdfParser:
>                      InComment = False
>                      HashComment = False
>              # check for */ comment end
> -            elif InComment and not DoubleSlashComment and not HashComment
> and self._CurrentChar() == T_CHAR_STAR and self._NextChar() ==
> TAB_BACK_SLASH:
> +            elif InComment and not DoubleSlashComment and not
> HashComment and self._CurrentChar() == TAB_STAR and self._NextChar() 
> == TAB_BACK_SLASH:
>                  self._SetCurrentCharValue(TAB_SPACE_SPLIT)
>                  self._GetOneChar()
>                  self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> @@ -552,7 +551,7 @@ class FdfParser:
>                  InComment = True
>                  HashComment = True
>              # check for /* comment start
> -            elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() ==
> T_CHAR_STAR:
> +            elif self._CurrentChar() == TAB_BACK_SLASH and 
> + self._NextChar() ==
> TAB_STAR:
>                  self._SetCurrentCharValue(TAB_SPACE_SPLIT)
>                  self._GetOneChar()
>                  self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> diff --git a/BaseTools/Source/Python/GenFds/GenFds.py
> b/BaseTools/Source/Python/GenFds/GenFds.py
> index 0c8091b79841..0513f488fca3 100644
> --- a/BaseTools/Source/Python/GenFds/GenFds.py
> +++ b/BaseTools/Source/Python/GenFds/GenFds.py
> @@ -653,7 +653,7 @@ class GenFds(object):
>                              FileGuidList.append(FileStatementGuid)
>                          Name = []
>                          FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
> -                        FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
> +                        FfsPath = glob(os.path.join(FfsPath,
> + FileStatementGuid) + TAB_STAR)
>                          if not FfsPath:
>                              continue
>                          if not os.path.exists(FfsPath[0]):
> diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> index ea61f723a73c..0812c56bdae8 100644
> --- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> +++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> @@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
> 
>          if not Inf.IsBinaryModule:
>              for File in Inf.Sources:
> -                if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag} and
> \
> -                    File.ToolChainFamily in {"", "*",
> GenFdsGlobalVariable.ToolChainFamily}:
> +                if File.TagName in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainTag} and \
> +                    File.ToolChainFamily in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainFamily}:
>                      FileList.append((File, 
> DataType.TAB_UNKNOWN_FILE))
> 
>          for File in Inf.Binaries:
> -            if File.Target in {DataType.TAB_COMMON, '*',
> GenFdsGlobalVariable.TargetName}:
> +            if File.Target in {DataType.TAB_COMMON, 
> + DataType.TAB_STAR,
> GenFdsGlobalVariable.TargetName}:
>                  FileList.append((File, File.Type))
> 
>          for File, FileType in FileList:
> @@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList,
> NameGuid):
>              for Index in range(2, -1, -1):
>                  for Key in list(BuildOption.keys()):
>                      List = Key.split('_')
> -                    if List[Index] == '*':
> +                    if List[Index] == DataType.TAB_STAR:
>                          for String in ToolDb[ToolList[Index]]:
>                              if String in [Arch, 
> GenFdsGlobalVariable.TargetName,
> GenFdsGlobalVariable.ToolChainTag]:
>                                  List[Index] = String diff --git 
> a/BaseTools/Source/Python/GenFds/Section.py
> b/BaseTools/Source/Python/GenFds/Section.py
> index 19a70009dcce..bab74aedf0b9 100644
> --- a/BaseTools/Source/Python/GenFds/Section.py
> +++ b/BaseTools/Source/Python/GenFds/Section.py
> @@ -131,7 +131,7 @@ class Section (SectionClassObject):
>                      if File.Type == FileType or 
> (int(FfsInf.PiSpecVersion, 16) >= 0x0001000A \
>                                                   and FileType == 
> 'DXE_DPEX' and File.Type ==
> BINARY_FILE_TYPE_SMM_DEPEX) \
>                                                   or (FileType == 
> BINARY_FILE_TYPE_TE and File.Type == BINARY_FILE_TYPE_PE32):
> -                        if '*' in FfsInf.TargetOverrideList or File.Target == '*' or
> File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
> +                        if TAB_STAR in FfsInf.TargetOverrideList or 
> + File.Target ==
> TAB_STAR or File.Target in FfsInf.TargetOverrideList or 
> FfsInf.TargetOverrideList == []:
>                              FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
>                          else:
>                              GenFdsGlobalVariable.InfLogger ("\nBuild 
> Target \'%s\' of File %s is not in the Scope of %s specified by INF %s 
> in FDF" %(File.Target, File.File, FfsInf.TargetOverrideList, 
> FfsInf.InfFileName)) diff --git 
> a/BaseTools/Source/Python/Workspace/DscBuildData.py
> b/BaseTools/Source/Python/Workspace/DscBuildData.py
> index 11aa63fb263c..22cbbb119a5a 100644
> --- a/BaseTools/Source/Python/Workspace/DscBuildData.py
> +++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
> @@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
>                  continue
>              if Attr != "FLAGS":
>                  continue
> -            if Target == "*" or Target == self._Target:
> -                if Tag == "*" or Tag == self._Toolchain:
> +            if Target == TAB_STAR or Target == self._Target:
> +                if Tag == TAB_STAR or Tag == self._Toolchain:
>                      if 'COMMON' not in BuildOptions:
>                          BuildOptions['COMMON'] = set()
> -                    if Arch == "*":
> +                    if Arch == TAB_STAR:
>                          BuildOptions['COMMON'].add(self.BuildOptions[Options])
>                      if Arch in self.SupArchList:
>                          if Arch not in BuildOptions:
> --
> 2.16.2.windows.1



  reply	other threads:[~2018-12-04  1:52 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1542382796.git.jaben.carsey@intel.com>
2018-11-16 15:40 ` [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*' Jaben Carsey
2018-11-27 18:02   ` Carsey, Jaben
2018-11-28  7:37   ` Feng, Bob C
2018-12-03  2:30   ` Zhu, Yonghong
2018-12-03 15:19     ` Carsey, Jaben
2018-12-04  1:52       ` Zhu, Yonghong [this message]
2018-12-07  0:50         ` Carsey, Jaben
2018-12-07  0:53           ` Carsey, Jaben

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=B9726D6DCCFB8B4CA276A9169B02216D521846B4@SHSMSX103.ccr.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox