ApolloLake with EDK2 - Ubuntu boots but Windows 10 does not

ApolloLake with EDK2 - Ubuntu boots but Windows 10 does not

[Soni, Amrit]

Hi,

I have built a BIOS for my custom board very similar to LeafHill (ApolloLake). BIOS boots fine and I can boot Ubuntu from USB stick. But when I try to boot Windows 10 installer from USB, it will show Windows 10 logo screen and then will go into spin. Any suggestions?

I use Ubuntu for building EDK2.

Thanks.

Re: ApolloLake with EDK2 - Ubuntu boots but Windows 10 does not

[Johnson, Brian (EXL - Eagan)]

Amrit,

You may be able to hook up Microsoft's remote kernel debugger and get some idea of how far it is getting.  I'm afraid I can't give you specifics on doing that, though; it's been years since I've tried.

I know in general Windows is pretty sensitive to ACPI issues.  Linux is much more forgiving.  So that could be it... hard to say.  If there are any conformance tests you could run, that may be helpful.

I'm not an expert on Windows boot debugging... maybe someone else will have better ideas.

Brian

-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Soni, Amrit
Sent: Friday, September 8, 2017 6:14 PM
To: edk2-devel@lists.01.org
Subject: [edk2] ApolloLake with EDK2 - Ubuntu boots but Windows 10 does not

Hi,

I have built a BIOS for my custom board very similar to LeafHill (ApolloLake). BIOS boots fine and I can boot Ubuntu from USB stick. But when I try to boot Windows 10 installer from USB, it will show Windows 10 logo screen and then will go into spin. Any suggestions?

I use Ubuntu for building EDK2.

Thanks.

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel