From: "Guomin Jiang" <guomin.jiang@intel.com>
To: "mikuback@linux.microsoft.com" <mikuback@linux.microsoft.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Gao, Liming" <gaoliming@byosoft.com.cn>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"Xu, Wei6" <wei6.xu@intel.com>
Subject: Re: [PATCH v1 1/1] FmpDevicePkg/FmpDxe: Update FmpDeviceCheckImageWithStatus() handling
Date: Fri, 7 Jan 2022 03:45:02 +0000 [thread overview]
Message-ID: <BN0PR11MB56966B8C45D197F39472C9B19D4D9@BN0PR11MB5696.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20220104203824.2047-1-mikuback@linux.microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Guomin
> -----Original Message-----
> From: mikuback@linux.microsoft.com <mikuback@linux.microsoft.com>
> Sent: Wednesday, January 5, 2022 4:38 AM
> To: devel@edk2.groups.io
> Cc: Gao, Liming <gaoliming@byosoft.com.cn>; Kinney, Michael D
> <michael.d.kinney@intel.com>; Jiang, Guomin <Guomin.Jiang@intel.com>;
> Xu, Wei6 <wei6.xu@intel.com>
> Subject: [PATCH v1 1/1] FmpDevicePkg/FmpDxe: Update
> FmpDeviceCheckImageWithStatus() handling
>
> From: Michael Kubacki <michael.kubacki@microsoft.com>
>
> Update the logic handling last attempt status codes from
> FmpDeviceCheckImageWithStatus() implementations to account for cases
> when the function return status code is EFI_SUCCESS (since the image was
> checked successfully) but the ImageUpdatable value is not valid.
>
> In addition the following sentence is removed from the LastAttemptStatus
> parameter definition for
> FmpDeviceCheckImageWithStatus() since it can lead to confusion.
> The expected status code value range is sufficient to implement the library
> API.
>
> "This value will only be checked when this
> function returns an error."
>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Guomin Jiang <guomin.jiang@intel.com>
> Cc: Wei6 Xu <wei6.xu@intel.com>
> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
> ---
> FmpDevicePkg/FmpDxe/FmpDxe.c | 23 +++++++++++++++-----
> FmpDevicePkg/Library/FmpDeviceLibNull/FmpDeviceLib.c | 3 +--
> FmpDevicePkg/Include/Library/FmpDeviceLib.h | 3 +--
> 3 files changed, 19 insertions(+), 10 deletions(-)
>
> diff --git a/FmpDevicePkg/FmpDxe/FmpDxe.c
> b/FmpDevicePkg/FmpDxe/FmpDxe.c index 197df28c8dd6..1e7ec4a09e16
> 100644
> --- a/FmpDevicePkg/FmpDxe/FmpDxe.c
> +++ b/FmpDevicePkg/FmpDxe/FmpDxe.c
> @@ -1040,8 +1040,19 @@ CheckTheImageInternal (
> //
> Status = FmpDeviceCheckImageWithStatus ((((UINT8 *)Image) +
> AllHeaderSize), RawSize, ImageUpdatable, LastAttemptStatus);
> if (EFI_ERROR (Status)) {
> + // The image cannot be valid if an error occurred checking the image
> + if (*ImageUpdatable == IMAGE_UPDATABLE_VALID) {
> + *ImageUpdatable = IMAGE_UPDATABLE_INVALID;
> + }
> +
> DEBUG ((DEBUG_ERROR, "FmpDxe(%s): CheckTheImage() - FmpDeviceLib
> CheckImage failed. Status = %r\n", mImageIdName, Status));
> + }
>
> + //
> + // Only validate the library last attempt status code if the image is not
> updatable.
> + // This specifically avoids converting LAST_ATTEMPT_STATUS_SUCCESS if it
> set for an updatable image.
> + //
> + if (*ImageUpdatable != IMAGE_UPDATABLE_VALID) {
> //
> // LastAttemptStatus returned from the device library should fall within
> the designated error range
> // [LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE,
> LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MAX_ERROR_CODE_VALUE]
> @@ -1049,12 +1060,12 @@ CheckTheImageInternal (
> if ((*LastAttemptStatus <
> LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE) ||
> (*LastAttemptStatus >
> LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MAX_ERROR_CODE_VALUE))
> {
> - DEBUG (
> - (DEBUG_ERROR,
> - "FmpDxe(%s): CheckTheImage() - LastAttemptStatus %d from
> FmpDeviceCheckImageWithStatus() is invalid.\n",
> - mImageIdName,
> - *LastAttemptStatus)
> - );
> + DEBUG ((
> + DEBUG_ERROR,
> + "FmpDxe(%s): CheckTheImage() - LastAttemptStatus %d from
> FmpDeviceCheckImageWithStatus() is invalid.\n",
> + mImageIdName,
> + *LastAttemptStatus
> + ));
> *LastAttemptStatus = LAST_ATTEMPT_STATUS_ERROR_UNSUCCESSFUL;
> }
> }
> diff --git a/FmpDevicePkg/Library/FmpDeviceLibNull/FmpDeviceLib.c
> b/FmpDevicePkg/Library/FmpDeviceLibNull/FmpDeviceLib.c
> index 2e5c17b2b0f9..82219e87a430 100644
> --- a/FmpDevicePkg/Library/FmpDeviceLibNull/FmpDeviceLib.c
> +++ b/FmpDevicePkg/Library/FmpDeviceLibNull/FmpDeviceLib.c
> @@ -434,8 +434,7 @@ FmpDeviceCheckImage (
> IMAGE_UPDATABLE_VALID_WITH_VENDOR_CODE
> @param[out] LastAttemptStatus A pointer to a UINT32 that holds the last
> attempt
> status to report back to the ESRT table in case
> - of error. This value will only be checked when this
> - function returns an error.
> + of error.
>
> The return status code must fall in the range of
>
> LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE to
> diff --git a/FmpDevicePkg/Include/Library/FmpDeviceLib.h
> b/FmpDevicePkg/Include/Library/FmpDeviceLib.h
> index a14406abe8b5..f82ef64503fa 100644
> --- a/FmpDevicePkg/Include/Library/FmpDeviceLib.h
> +++ b/FmpDevicePkg/Include/Library/FmpDeviceLib.h
> @@ -421,8 +421,7 @@ FmpDeviceCheckImage (
> IMAGE_UPDATABLE_VALID_WITH_VENDOR_CODE
> @param[out] LastAttemptStatus A pointer to a UINT32 that holds the last
> attempt
> status to report back to the ESRT table in case
> - of error. This value will only be checked when this
> - function returns an error.
> + of error.
>
> The return status code must fall in the range of
>
> LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE to
> --
> 2.28.0.windows.1
next prev parent reply other threads:[~2022-01-07 3:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-04 20:38 [PATCH v1 1/1] FmpDevicePkg/FmpDxe: Update FmpDeviceCheckImageWithStatus() handling Michael Kubacki
2022-01-07 3:45 ` Guomin Jiang [this message]
2022-01-19 19:46 ` [edk2-devel] " Michael Kubacki
2022-01-20 1:19 ` 回复: " gaoliming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BN0PR11MB56966B8C45D197F39472C9B19D4D9@BN0PR11MB5696.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox