Hi Leif, I got these from https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md A ________________________________ From: devel@edk2.groups.io on behalf of Leif Lindholm via groups.io Sent: Tuesday, November 17, 2020 10:02 AM To: Andrei Warkentin Cc: devel@edk2.groups.io ; ard.biesheuvel@arm.com ; pete@akeo.ie ; philmd@redhat.com Subject: Re: [edk2-devel] [edk2-platforms][PATCH 1/1] Platforms/RaspberryPi: add CM4 and 400 as BCM2711 designs Hi Andrei, On Sun, Nov 15, 2020 at 04:25:27 -0600, Andrei Warkentin wrote: > Like the Pi 4B, the 3GB/4GB choices apply to it as well. > > Signed-off-by: Andrei Warkentin Patch looks straghtforward enough, but ideally I'd like someone to chime in with tested-by. That hasn't happened so far - are these documented anywhere I could easily sanity check myself? / Leif > --- > Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c > index 5302ccd8..ade91c9f 100644 > --- a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c > +++ b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c > @@ -596,6 +596,10 @@ RpiFirmwareGetModelName ( > return "Raspberry Pi Compute Module 3+"; > case 0x11: > return "Raspberry Pi 4 Model B"; > + case 0x13: > + return "Raspberry Pi 400"; > + case 0x14: > + return "Raspberry Pi Compute Module 4"; > default: > return "Unknown Raspberry Pi Model"; > } > @@ -670,6 +674,8 @@ RPiFirmwareGetModelFamily ( > *ModelFamily = 3; > break; > case 0x11: // Raspberry Pi 4 Model B > + case 0x13: // Raspberry Pi 400 > + case 0x14: // Raspberry Pi Computer Module 4 > *ModelFamily = 4; > break; > default: > -- > 2.20.1 >