From: "Wu, Hao A" <hao.a.wu@intel.com>
To: "Ni, Ray" <ray.ni@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>,
"cheptsov@ispras.ru" <cheptsov@ispras.ru>
Cc: "Wang, Jian J" <jian.j.wang@intel.com>,
"Albecki, Mateusz" <mateusz.albecki@intel.com>,
Laszlo Ersek <lersek@redhat.com>
Subject: Re: [edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe: Add support for drives in RAID mode
Date: Tue, 15 Dec 2020 01:52:54 +0000 [thread overview]
Message-ID: <BN8PR11MB3666547AC4227797E49A3662CAC60@BN8PR11MB3666.namprd11.prod.outlook.com> (raw)
In-Reply-To: <CO1PR11MB4930584A23E8FE86A3489E4C8CC60@CO1PR11MB4930.namprd11.prod.outlook.com>
> -----Original Message-----
> From: Ni, Ray <ray.ni@intel.com>
> Sent: Tuesday, December 15, 2020 9:45 AM
> To: devel@edk2.groups.io; cheptsov@ispras.ru
> Cc: Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A <hao.a.wu@intel.com>;
> Albecki, Mateusz <mateusz.albecki@intel.com>; Laszlo Ersek
> <lersek@redhat.com>
> Subject: RE: [edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe:
> Add support for drives in RAID mode
>
> DuetPkg was removed from edk2.
> If the change is specially for DUET use case, I am afraid we cannot accept this
> change.
>
> Hao,
> Can this change benefit a general use case?
Hello Ray,
My understanding to the proposed PCD is that drives behind a RAID mode SATA controller can be configured to working in non-RAID mode (acting like individual drives).
As for the DuetPkg, below is a previous comment from Vitaly:
"there is no firmware preference for that (Hao: configure the controller to non-RAID mode). The firmware does not support UEFI, and we are running through DuetPkg."
Best Regards,
Hao Wu
>
> Thanks,
> Ray
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Vitaly
> > Cheptsov
> > Sent: Friday, December 11, 2020 5:25 PM
> > To: devel@edk2.groups.io
> > Cc: Vitaly Cheptsov <cheptsov@ispras.ru>; Wang, Jian J
> > <jian.j.wang@intel.com>; Wu, Hao A <hao.a.wu@intel.com>; Albecki,
> > Mateusz <mateusz.albecki@intel.com>; Laszlo Ersek <lersek@redhat.com>
> > Subject: [edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe:
> Add
> > support for drives in RAID mode
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3118
> >
> > This resolves the problem of using drivers connected to Intel G33
> > builtin SATA controller when run from DuetPkg when it can only be
> > configured in RAID mode through the firmware settings.
> >
> > Cc: Jian J Wang <jian.j.wang@intel.com>
> > Cc: Hao A Wu <hao.a.wu@intel.com>
> > Cc: Mateusz Albecki <mateusz.albecki@intel.com>
> > Cc: Laszlo Ersek <lersek@redhat.com>
> > Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
> > ---
> > MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > index ab06e2833c..301335c967 100644
> > --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > @@ -324,7 +324,7 @@ SataControllerSupported (
> > return EFI_UNSUPPORTED;
> > }
> >
> > - if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
> > + if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData) ||
> > + IS_PCI_RAID (&PciData)) {
> > return EFI_SUCCESS;
> > }
> >
> > @@ -465,7 +465,7 @@ SataControllerStart (
> > if (IS_PCI_IDE (&PciData)) {
> > Private->IdeInit.ChannelCount = IDE_MAX_CHANNEL;
> > Private->DeviceCount = IDE_MAX_DEVICES;
> > - } else if (IS_PCI_SATADPA (&PciData)) {
> > + } else if (IS_PCI_SATADPA (&PciData) || IS_PCI_RAID (&PciData)) {
> > //
> > // Read Ports Implemented(PI) to calculate max port number (0 based).
> > //
> > --
> > 2.24.3 (Apple Git-128)
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#68707):
> > https://edk2.groups.io/g/devel/message/68707
> > Mute This Topic: https://groups.io/mt/78875596/1712937
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub [ray.ni@intel.com]
> > -=-=-=-=-=-=
> >
next prev parent reply other threads:[~2020-12-15 1:52 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 9:25 [PATCH 1/2] MdeModulePkg/SataControllerDxe: Add support for drives in RAID mode Vitaly Cheptsov
2020-12-11 9:25 ` [PATCH 2/2] MdeModulePkg/AtaAtapiPassThru: " Vitaly Cheptsov
2020-12-14 6:22 ` [PATCH 1/2] MdeModulePkg/SataControllerDxe: " Wu, Hao A
2020-12-14 7:33 ` Vitaly Cheptsov
2020-12-14 7:56 ` [edk2-devel] " Wu, Hao A
2020-12-14 8:28 ` Vitaly Cheptsov
2020-12-15 1:28 ` Wu, Hao A
2020-12-15 1:44 ` Ni, Ray
2020-12-15 1:52 ` Wu, Hao A [this message]
2020-12-15 3:54 ` Michael D Kinney
2020-12-15 8:58 ` Vitaly Cheptsov
2020-12-15 11:07 ` Wu, Hao A
2020-12-15 16:58 ` Michael D Kinney
2020-12-15 17:34 ` Vitaly Cheptsov
2020-12-15 17:41 ` Michael D Kinney
2020-12-15 17:44 ` Vitaly Cheptsov
2020-12-15 18:09 ` Michael D Kinney
2020-12-15 18:55 ` Vitaly Cheptsov
2020-12-15 18:59 ` Michael D Kinney
2020-12-15 19:40 ` Vitaly Cheptsov
2020-12-15 19:41 ` Michael D Kinney
2020-12-15 19:46 ` Vitaly Cheptsov
2020-12-15 20:01 ` Michael D Kinney
2020-12-16 9:31 ` Vitaly Cheptsov
2021-02-02 13:00 ` Albecki, Mateusz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BN8PR11MB3666547AC4227797E49A3662CAC60@BN8PR11MB3666.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox