From: "Kubacki, Michael A" <michael.a.kubacki@intel.com>
To: "Tiger Liu(BJ-RD)" <TigerLiu@zhaoxin.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Subject: Re: [edk2-devel] [edk2] OCP : Olympus project's UEFI BIOS code support
Date: Wed, 6 Nov 2019 02:11:57 +0000 [thread overview]
Message-ID: <BY5PR11MB448493D886DEE7C9B23C24A8B5790@BY5PR11MB4484.namprd11.prod.outlook.com> (raw)
In-Reply-To: <5651ae52723e4fd99d0aec19d317278d@zhaoxin.com>
No other OCP support at the moment. Current board support is summarized in this Readme.md:
https://github.com/tianocore/edk2-platforms/blob/master/Readme.md#intel
Newer Intel platform firmware is following the EDK II Minimum Platform specification
and the boards supported are documented here:
https://github.com/tianocore/edk2-platforms/blob/master/Platform/Intel/Readme.md#supported-hardware
KabylakeOpenBoardPkg supports two boards:
* KabylakeRvp3 (an Intel Kaby Lake Y Reference and Validation Platform)
* GalagoPro3 (a commercial laptop with Kaby Lake from System 76)
WhiskeylakeOpenBoardPkg currently supports:
* WhiskeylakeURvp (an Intel Whiskey Lake U Reference and Validation Platform)
There is a plan to add board support for the UP Xtreme board in WhiskeylakeOpenBoardPkg
soon as noted here: https://bugzilla.tianocore.org/show_bug.cgi?id=2191.
Thanks,
Michael
> -----Original Message-----
> From: Tiger Liu(BJ-RD) <TigerLiu@zhaoxin.com>
> Sent: Tuesday, November 5, 2019 5:32 PM
> To: Kubacki, Michael A <michael.a.kubacki@intel.com>;
> devel@edk2.groups.io
> Subject: Re: [edk2-devel] [edk2] OCP : Olympus project's UEFI BIOS code
> support
>
> Hi, Michael:
> Thanks for your reply!
>
> Is there any other project For Intel open source platform firmware?
>
> KabylakeOpenBoardPkg / WhiskeylakeOpenBoardPkg is also for OCP
> platform board?
>
> Thanks
> -----邮件原件-----
> 发件人: Kubacki, Michael A <michael.a.kubacki@intel.com>
> 发送时间: 2019年11月6日 2:38
> 收件人: devel@edk2.groups.io; Tiger Liu(BJ-RD) <TigerLiu@zhaoxin.com>
> 主题: RE: [edk2-devel] [edk2] OCP : Olympus project's UEFI BIOS code
> support
>
> Hi,
>
> The PurleyOpenBoardPkg code is being removed as noted in the following
> patch series recently sent to the mailing list -
> https://edk2.groups.io/g/devel/message/49843.
>
> It has not been tested in some time and does not align with our vision for
> Intel open source platform firmware. The effort required to update the code
> and sustain testing alongside a large number of planned changes elsewhere
> that will impact PurleyOpenBoardPkg led to the decision to remove the
> package before the next stable tag.
>
> Prior to removal the code should compile by following the instructions here:
> https://github.com/tianocore/edk2-
> platforms/blob/master/Platform/Intel/Readme.md
>
> Thanks,
> Michael
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Tiger
> > Liu(BJ-RD)
> > Sent: Tuesday, November 5, 2019 2:58 AM
> > To: devel@edk2.groups.io; Kubacki, Michael A
> > <michael.a.kubacki@intel.com>
> > Subject: [edk2-devel] [edk2] OCP : Olympus project's UEFI BIOS code
> > support
> >
> > Hi, Michael:
> > I found edk2-platforms include OCP Olympus board’s support package.
> > edk2-platforms\Platform\Intel\PurleyOpenBoardPkg\BoardMtOlympus
> >
> > In this wiki,
> > https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-
> > Platforms
> > It also said,edk2-platform include Project Olympus’s support:
> > EDK II Minimum Platforms
> > • https://github.com/tianocore/tianocore.github.io/wiki/Kaby-Lake-
> > MinPlatform - EDK II platform firmware on 7th Generation Intel® Core™
> > Processors and chipsets (formerly
> > https://ark.intel.com/products/codename/82879/Kaby-Lake platforms).
> > • https://github.com/tianocore/tianocore.github.io/wiki/Purley-
> > MinPlatform - EDK II platform firmware for the Open Compute Project
> > (OCP)
> >
> http://www.opencompute.org/wiki/Server/ProjectOlympus#Project_Olymp
> > us_Server_Motherboards.
> > • https://github.com/tianocore/tianocore.github.io/wiki/Whiskey-Lake-
> > MinPlatform - EDK II platform firmware on 8th Generation Intel® Core™
> > Processors and chipsets (formerly
> >
> https://ark.intel.com/content/www/us/en/ark/products/codename/135883
> > /whiskey-lake.html platforms).
> >
> > So, Could I compile a UEFI BIOS Firmware for Olympus board with
> > current edk2-platform code + edk2 code?
> >
> > Note:
> > Project Olympus board's wiki page:
> > https://www.opencompute.org/wiki/Server/ProjectOlympus
> >
> > Thanks
> >
> >
> > 保密声明:
> > 本邮件含有保密或专有信息,仅供指定收件人使用。严禁对本邮件或
> 其内
> > 容做任何未经授权的查阅、使用、复制或转发。
> > CONFIDENTIAL NOTE:
> > This email contains confidential or legally privileged information and
> > is for the sole use of its intended recipient. Any unauthorized
> > review, use, copying or forwarding of this email or the content of this email
> is strictly prohibited.
> >
> >
>
>
>
> 保密声明:
> 本邮件含有保密或专有信息,仅供指定收件人使用。严禁对本邮件或其
> 内容做任何未经授权的查阅、使用、复制或转发。
> CONFIDENTIAL NOTE:
> This email contains confidential or legally privileged information and is for the
> sole use of its intended recipient. Any unauthorized review, use, copying or
> forwarding of this email or the content of this email is strictly prohibited.
next prev parent reply other threads:[~2019-11-06 2:12 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 1:31 [edk2-devel] [edk2] OCP : Olympus project's UEFI BIOS code support Tiger Liu(BJ-RD)
2019-11-06 2:11 ` Kubacki, Michael A [this message]
2019-11-06 23:04 ` rebecca
2019-11-07 23:23 ` Kubacki, Michael A
-- strict thread matches above, loose matches on Subject: below --
2019-11-08 6:27 Tiger Liu(BJ-RD)
2019-11-08 18:28 ` Oram, Isaac W
2019-11-08 1:20 Tiger Liu(BJ-RD)
2019-11-07 5:45 Tiger Liu(BJ-RD)
2019-11-07 22:17 ` Oram, Isaac W
2019-11-06 7:48 Tiger Liu(BJ-RD)
2019-11-06 6:47 Tiger Liu(BJ-RD)
2019-11-06 7:04 ` Kubacki, Michael A
2019-11-05 10:57 Tiger Liu(BJ-RD)
2019-11-05 18:38 ` Kubacki, Michael A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BY5PR11MB448493D886DEE7C9B23C24A8B5790@BY5PR11MB4484.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox