From: "Guo Dong" <guo.dong@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Dong, Eric" <eric.dong@intel.com>, "Ni, Ray" <ray.ni@intel.com>,
"lersek@redhat.com" <lersek@redhat.com>,
"Kumar, Rahul1" <rahul1.kumar@intel.com>
Subject: FW: UefiCpuPkg/CpuDxe: Fix boot error
Date: Wed, 6 Jan 2021 22:07:15 +0000 [thread overview]
Message-ID: <BYAPR11MB36221BF2BF882982700844569ED00@BYAPR11MB3622.namprd11.prod.outlook.com> (raw)
In-Reply-To: <BYAPR11MB36223CE7DD008AE912112CD59ED00@BYAPR11MB3622.namprd11.prod.outlook.com>
[-- Attachment #1: Type: text/plain, Size: 4583 bytes --]
Hi Mike,
I just did a test with retfq, it looks the compiler will take 'retfq' as a label with a warnig:
"CpuAsm.iii:26: warning: label alone on a line without a colon might be in error"
CpuAsm.nasm is the source file.
Both CpuAsm.iii and CpuAsm.obj are from the build folder.
CpuAsm_dasm.txt is the dasm file using objdump.
I am using "NASM version 2.12.01rc2 compiled on Mar 7 2016".
BTW, if using "O64 retf" instead of "retfq", the generated obj matches with DB one.
Do you prefer using " O64 retf" comparing with "DB 0x48, 0xcb"?
Thanks,
Guo
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Tuesday, January 5, 2021 7:01 PM
> To: Dong, Guo <guo.dong@intel.com>; devel@edk2.groups.io; Kinney, Michael
> D <michael.d.kinney@intel.com>
> Cc: Dong, Eric <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>;
> lersek@redhat.com; Kumar, Rahul1 <rahul1.kumar@intel.com>
> Subject: RE: [edk2-devel] [PATCH] UefiCpuPkg/CpuDxe: Fix boot error
>
> Hi Guo,
>
> Could be the port from MASM to NASM did not check to see if NASM supported
> the instruction.
>
> You can verify the NASM disassembly to make sure it matches the DB bytes.
>
> Mike
>
> > -----Original Message-----
> > From: Dong, Guo <guo.dong@intel.com>
> > Sent: Tuesday, January 5, 2021 4:51 PM
> > To: Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io
> > Cc: Dong, Eric <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>;
> lersek@redhat.com; Kumar, Rahul1
> > <rahul1.kumar@intel.com>
> > Subject: RE: [edk2-devel] [PATCH] UefiCpuPkg/CpuDxe: Fix boot error
> >
> >
> > Hi Mike,
> >
> > Thanks for the comments. I will remove DB and submit a new patch.
> > I used DB because retfq is used in EDK2 only in
> OvmfPkg\Library\LoadLinuxLib\X64\JumpToKernel.nasm and it used DB.
> > Not sure if there is any BKM why they use it.
> >
> > Thanks,
> > Guo
> >
> > > -----Original Message-----
> > > From: Kinney, Michael D <michael.d.kinney@intel.com>
> > > Sent: Monday, January 4, 2021 9:31 PM
> > > To: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com>; Kinney,
> Michael
> > > D <michael.d.kinney@intel.com>
> > > Cc: Dong, Eric <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>;
> > > lersek@redhat.com; Kumar, Rahul1 <rahul1.kumar@intel.com>
> > > Subject: RE: [edk2-devel] [PATCH] UefiCpuPkg/CpuDxe: Fix boot error
> > >
> > > Hi Guo,
> > >
> > > NASM has good support for instructions. Can the DB be removed and
> replaced
> > > with the equivalent instruction?
> > >
> > > Thanks,
> > >
> > > Mike
> > >
> > > > -----Original Message-----
> > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Guo
> Dong
> > > > Sent: Thursday, December 24, 2020 12:04 PM
> > > > To: devel@edk2.groups.io
> > > > Cc: Dong, Eric <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>;
> > > lersek@redhat.com; Kumar, Rahul1
> > > > <rahul1.kumar@intel.com>
> > > > Subject: [edk2-devel] [PATCH] UefiCpuPkg/CpuDxe: Fix boot error
> > > >
> > > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3084
> > > >
> > > > When DXE drivers are dispatched above 4GB memory in 64bit
> > > > mode, the address setCodeSelectorLongJump in stack will
> > > > be override by parameter. Jump to Qword is not supported
> > > > by some processors. So use retfq instead.
> > > >
> > > > Signed-off-by: Guo Dong <guo.dong@intel.com>
> > > > ---
> > > > UefiCpuPkg/CpuDxe/X64/CpuAsm.nasm | 8 +++-----
> > > > 1 file changed, 3 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/UefiCpuPkg/CpuDxe/X64/CpuAsm.nasm
> > > b/UefiCpuPkg/CpuDxe/X64/CpuAsm.nasm
> > > > index c3489bcc3e..e33ddb2784 100644
> > > > --- a/UefiCpuPkg/CpuDxe/X64/CpuAsm.nasm
> > > > +++ b/UefiCpuPkg/CpuDxe/X64/CpuAsm.nasm
> > > > @@ -20,13 +20,11 @@
> > > > ;------------------------------------------------------------------------------
> > > > global ASM_PFX(SetCodeSelector)
> > > > ASM_PFX(SetCodeSelector):
> > > > - sub rsp, 0x10
> > > > + push rcx,
> > > > lea rax, [setCodeSelectorLongJump]
> > > > - mov [rsp], rax
> > > > - mov [rsp+4], cx
> > > > - jmp dword far [rsp]
> > > > + push rax
> > > > + DB 0x48, 0xcb ; retfq
> > > > setCodeSelectorLongJump:
> > > > - add rsp, 0x10
> > > > ret
> > > >
> > > > ;------------------------------------------------------------------------------
> > > > --
> > > > 2.16.2.windows.1
> > > >
> > > >
> > > >
> > > >
> > > >
[-- Attachment #2: CpuAsm.iii --]
[-- Type: application/x-iphone, Size: 1139 bytes --]
[-- Attachment #3: CpuAsm.obj --]
[-- Type: application/octet-stream, Size: 1329 bytes --]
[-- Attachment #4: CpuAsm_dasm.txt --]
[-- Type: text/plain, Size: 734 bytes --]
/mnt/c/projects/sources/Gitlab/uefi/Edk2Open/Build/UefiPayloadPkgX64/DEBUG_VS2015x86/X64/UefiCpuPkg/CpuDxe/CpuDxe/OUTPUT/X64/CpuAsm.obj: file format pe-x86-64
Disassembly of section .text:
0000000000000000 <SetCodeSelector>:
0: 51 push %rcx
1: 48 8d 05 01 00 00 00 lea 0x1(%rip),%rax # 9 <retfq>
8: 50 push %rax
0000000000000009 <retfq>:
9: c3 retq
000000000000000a <SetDataSelectors>:
a: 66 8e d1 mov %cx,%ss
d: 66 8e d9 mov %cx,%ds
10: 66 8e c1 mov %cx,%es
13: 66 8e e1 mov %cx,%fs
16: 66 8e e9 mov %cx,%gs
19: c3 retq
[-- Attachment #5: CpuAsm.nasm --]
[-- Type: application/octet-stream, Size: 1175 bytes --]
;------------------------------------------------------------------------------
;*
;* Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
;* SPDX-License-Identifier: BSD-2-Clause-Patent
;*
;* CpuAsm.nasm
;*
;* Abstract:
;*
;------------------------------------------------------------------------------
DEFAULT REL
SECTION .text
;------------------------------------------------------------------------------
; VOID
; SetCodeSelector (
; UINT16 Selector
; );
;------------------------------------------------------------------------------
global ASM_PFX(SetCodeSelector)
ASM_PFX(SetCodeSelector):
push rcx,
lea rax, [setCodeSelectorLongJump]
push rax
retfq
setCodeSelectorLongJump:
ret
;------------------------------------------------------------------------------
; VOID
; SetDataSelectors (
; UINT16 Selector
; );
;------------------------------------------------------------------------------
global ASM_PFX(SetDataSelectors)
ASM_PFX(SetDataSelectors):
o16 mov ss, cx
o16 mov ds, cx
o16 mov es, cx
o16 mov fs, cx
o16 mov gs, cx
ret
next parent reply other threads:[~2021-01-06 22:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <BYAPR11MB36223CE7DD008AE912112CD59ED00@BYAPR11MB3622.namprd11.prod.outlook.com>
2021-01-06 22:07 ` Guo Dong [this message]
2021-01-07 1:00 ` UefiCpuPkg/CpuDxe: Fix boot error Michael D Kinney
2021-01-07 9:54 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR11MB36221BF2BF882982700844569ED00@BYAPR11MB3622.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox