* Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload [not found] <1647D5DAE0E6DDAF.27572@groups.io> @ 2020-11-16 21:58 ` Guo Dong 2020-11-17 0:48 ` 回复: " gaoliming 0 siblings, 1 reply; 6+ messages in thread From: Guo Dong @ 2020-11-16 21:58 UTC (permalink / raw) To: devel@edk2.groups.io, Dong, Guo, gaoliming; +Cc: Ma, Maurice, You, Benjamin Hi Liming, This patch is sent before the soft freeze and passed review. I would like to merge this patch into edk2-stable202011 tomorrow if there is no additional feedback. And here is the PR and it passed all CI checks. https://github.com/tianocore/edk2/pull/1127 Thanks, Guo > -----Original Message----- > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Guo Dong > Sent: Sunday, November 15, 2020 5:35 PM > To: devel@edk2.groups.io > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > <benjamin.you@intel.com> > Subject: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from > Payload > > Hi All, > > This patch removed UEFI payload PEI phase to make UEFI payload simple. > It uses UefiPayloadEntry module to bridge bootloader and DXE phase. > > Original DSC files UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > are replaced by a single DSC UefiPayloadPkg.dsc. Pure IA32 support > is replaced by Pure X64 support. IA32 Entry point with X64 DXE phase > is still supported. > > Changes in V2: > Addressed all the review comments from Maurice. > Fixed debug msg in UefiPayloadEntry. > Updated the Handoff HOB to DXE core to include Payload FV. > Synced the GHCB changes from DxeIpl to UefiPayloadEntry. > > V1: > It is not necessary to have a PEI phase in the UEFI payload since no > specific PEI task is required. This patch adds a UefiPayloadEntry > driver to get UEFI Payload required information from the bootloaders, > convert them into a HOB list, load DXE core and transfer control to it. > > Here is the change details: > 1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc. > 2) Added UefiPayloadEntry driver. this is the only driver before DXE core. > 3) Added Pure X64 support, dropped Pure IA32 (Could add later if required) > 64bit payload with 32bit entry point is still supported. > 4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build. > Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > Tested with SBL and coreboot on QEMU. > > Refs: https://github.com/tianocore/edk2/pull/1127 > > CC: maurice.ma@intel.com > CC: benjamin.you@intel.com > Signed-off-by: Guo Dong <guo.dong@intel.com> > > Guo Dong (1): > UefiPayloadPkg: Remove PEI phase from Payload > > UefiPayloadPkg/BlSupportPei/BlSupportPei.h | 39 - > UefiPayloadPkg/BlSupportPei/BlSupportPei.inf | 73 -- > UefiPayloadPkg/BuildAndIntegrationInstructions.txt | 32 +- > UefiPayloadPkg/Include/Library/BlParseLib.h | 4 +- > UefiPayloadPkg/Library/HobLib/Hob.c | 706 ++++++++++++++++ > UefiPayloadPkg/Library/HobLib/HobLib.inf | 39 + > UefiPayloadPkg/SecCore/FindPeiCore.c | 193 ----- > UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm | 78 -- > UefiPayloadPkg/SecCore/Ia32/Stack.nasm | 72 -- > UefiPayloadPkg/SecCore/SecCore.inf | 58 -- > UefiPayloadPkg/SecCore/SecMain.c | 288 ------- > UefiPayloadPkg/SecCore/SecMain.h | 131 --- > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c | 365 ++++++++ > .../UefiPayloadEntry/Ia32/IdtVectorAsm.nasm | 71 ++ > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm | 46 + > UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c | 307 +++++++ > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c | 201 +++++ > .../UefiPayloadEntry.c} | 451 ++++------ > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h | 134 +++ > .../UefiPayloadEntry/UefiPayloadEntry.inf | 93 ++ > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c | 107 +++ > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm | 47 ++ > .../UefiPayloadEntry/X64/VirtualMemory.c | 939 > +++++++++++++++++++++ > .../UefiPayloadEntry/X64/VirtualMemory.h | 330 ++++++++ > UefiPayloadPkg/UefiPayloadPkg.dec | 5 +- > ...efiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} | 57 +- > UefiPayloadPkg/UefiPayloadPkg.fdf | 32 +- > UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 585 ------------- > 28 files changed, 3576 insertions(+), 1907 deletions(-) > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.h > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.inf > create mode 100644 UefiPayloadPkg/Library/HobLib/Hob.c > create mode 100644 UefiPayloadPkg/Library/HobLib/HobLib.inf > delete mode 100644 UefiPayloadPkg/SecCore/FindPeiCore.c > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/Stack.nasm > delete mode 100644 UefiPayloadPkg/SecCore/SecCore.inf > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.c > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.h > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/Ia32/IdtVectorAsm.nasm > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c > rename UefiPayloadPkg/{BlSupportPei/BlSupportPei.c => > UefiPayloadEntry/UefiPayloadEntry.c} (52%) > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.inf > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.c > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.h > rename UefiPayloadPkg/{UefiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} > (90%) > delete mode 100644 UefiPayloadPkg/UefiPayloadPkgIa32.dsc > > -- > 2.16.2.windows.1 > > > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* 回复: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload 2020-11-16 21:58 ` [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload Guo Dong @ 2020-11-17 0:48 ` gaoliming 2020-11-17 19:47 ` Guo Dong 0 siblings, 1 reply; 6+ messages in thread From: gaoliming @ 2020-11-17 0:48 UTC (permalink / raw) To: devel, guo.dong; +Cc: 'Ma, Maurice', 'You, Benjamin' Guo: This is a feature. So, please submit BZ for it. And, the first version patch is sent before soft feature freeze, and got comments. Then, the second version patch is sent and got reviewed after soft feature freeze. Based on https://github.com/tianocore/tianocore.github.io/wiki/SoftFeatureFreeze, this patch can't catch this stable tag. If you really want to catch this patch for this stable tag, please specify your reason. I will collect the community feedback and decide whether delay this stable tag. Thanks Liming > -----邮件原件----- > 发件人: bounce+27952+67620+4905953+8761045@groups.io > <bounce+27952+67620+4905953+8761045@groups.io> 代表 Guo Dong > 发送时间: 2020年11月17日 5:59 > 收件人: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com>; gaoliming > <gaoliming@byosoft.com.cn> > 抄送: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > <benjamin.you@intel.com> > 主题: Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > from Payload > > > Hi Liming, > > This patch is sent before the soft freeze and passed review. > I would like to merge this patch into edk2-stable202011 tomorrow if there is > no additional feedback. > > And here is the PR and it passed all CI checks. > https://github.com/tianocore/edk2/pull/1127 > > Thanks, > Guo > > > > -----Original Message----- > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Guo > Dong > > Sent: Sunday, November 15, 2020 5:35 PM > > To: devel@edk2.groups.io > > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > <benjamin.you@intel.com> > > Subject: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > from > > Payload > > > > Hi All, > > > > This patch removed UEFI payload PEI phase to make UEFI payload simple. > > It uses UefiPayloadEntry module to bridge bootloader and DXE phase. > > > > Original DSC files UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > are replaced by a single DSC UefiPayloadPkg.dsc. Pure IA32 support > > is replaced by Pure X64 support. IA32 Entry point with X64 DXE phase > > is still supported. > > > > Changes in V2: > > Addressed all the review comments from Maurice. > > Fixed debug msg in UefiPayloadEntry. > > Updated the Handoff HOB to DXE core to include Payload FV. > > Synced the GHCB changes from DxeIpl to UefiPayloadEntry. > > > > V1: > > It is not necessary to have a PEI phase in the UEFI payload since no > > specific PEI task is required. This patch adds a UefiPayloadEntry > > driver to get UEFI Payload required information from the bootloaders, > > convert them into a HOB list, load DXE core and transfer control to it. > > > > Here is the change details: > > 1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc. > > 2) Added UefiPayloadEntry driver. this is the only driver before DXE core. > > 3) Added Pure X64 support, dropped Pure IA32 (Could add later if required) > > 64bit payload with 32bit entry point is still supported. > > 4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build. > > Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > > > Tested with SBL and coreboot on QEMU. > > > > Refs: https://github.com/tianocore/edk2/pull/1127 > > > > CC: maurice.ma@intel.com > > CC: benjamin.you@intel.com > > Signed-off-by: Guo Dong <guo.dong@intel.com> > > > > Guo Dong (1): > > UefiPayloadPkg: Remove PEI phase from Payload > > > > UefiPayloadPkg/BlSupportPei/BlSupportPei.h | 39 - > > UefiPayloadPkg/BlSupportPei/BlSupportPei.inf | 73 -- > > UefiPayloadPkg/BuildAndIntegrationInstructions.txt | 32 +- > > UefiPayloadPkg/Include/Library/BlParseLib.h | 4 +- > > UefiPayloadPkg/Library/HobLib/Hob.c | 706 > ++++++++++++++++ > > UefiPayloadPkg/Library/HobLib/HobLib.inf | 39 + > > UefiPayloadPkg/SecCore/FindPeiCore.c | 193 ----- > > UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm | 78 -- > > UefiPayloadPkg/SecCore/Ia32/Stack.nasm | 72 -- > > UefiPayloadPkg/SecCore/SecCore.inf | 58 -- > > UefiPayloadPkg/SecCore/SecMain.c | 288 ------- > > UefiPayloadPkg/SecCore/SecMain.h | 131 --- > > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c | 365 ++++++++ > > .../UefiPayloadEntry/Ia32/IdtVectorAsm.nasm | 71 ++ > > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm | 46 + > > UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c | 307 +++++++ > > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c | 201 +++++ > > .../UefiPayloadEntry.c} | 451 ++++------ > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h | 134 +++ > > .../UefiPayloadEntry/UefiPayloadEntry.inf | 93 ++ > > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c | 107 +++ > > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm | 47 ++ > > .../UefiPayloadEntry/X64/VirtualMemory.c | 939 > > +++++++++++++++++++++ > > .../UefiPayloadEntry/X64/VirtualMemory.h | 330 ++++++++ > > UefiPayloadPkg/UefiPayloadPkg.dec | 5 +- > > ...efiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} | 57 +- > > UefiPayloadPkg/UefiPayloadPkg.fdf | 32 +- > > UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 585 > ------------- > > 28 files changed, 3576 insertions(+), 1907 deletions(-) > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.h > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.inf > > create mode 100644 UefiPayloadPkg/Library/HobLib/Hob.c > > create mode 100644 UefiPayloadPkg/Library/HobLib/HobLib.inf > > delete mode 100644 UefiPayloadPkg/SecCore/FindPeiCore.c > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/Stack.nasm > > delete mode 100644 UefiPayloadPkg/SecCore/SecCore.inf > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.c > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.h > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/Ia32/IdtVectorAsm.nasm > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm > > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c > > rename UefiPayloadPkg/{BlSupportPei/BlSupportPei.c => > > UefiPayloadEntry/UefiPayloadEntry.c} (52%) > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.inf > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.c > > create mode 100644 > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.h > > rename UefiPayloadPkg/{UefiPayloadPkgIa32X64.dsc => > UefiPayloadPkg.dsc} > > (90%) > > delete mode 100644 UefiPayloadPkg/UefiPayloadPkgIa32.dsc > > > > -- > > 2.16.2.windows.1 > > > > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload 2020-11-17 0:48 ` 回复: " gaoliming @ 2020-11-17 19:47 ` Guo Dong 2020-12-02 8:28 ` Patrick Rudolph 0 siblings, 1 reply; 6+ messages in thread From: Guo Dong @ 2020-11-17 19:47 UTC (permalink / raw) To: devel@edk2.groups.io, gaoliming@byosoft.com.cn; +Cc: Ma, Maurice, You, Benjamin Thanks Liming. If so it is OK to merge it after this stable tag. Thanks, Guo > -----Original Message----- > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of gaoliming > Sent: Monday, November 16, 2020 5:49 PM > To: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com> > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > <benjamin.you@intel.com> > Subject: 回复: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > from Payload > > Guo: > This is a feature. So, please submit BZ for it. > > And, the first version patch is sent before soft feature freeze, and got > comments. > Then, the second version patch is sent and got reviewed after soft feature > freeze. > > Based on > https://github.com/tianocore/tianocore.github.io/wiki/SoftFeatureFreeze, > this patch can't catch this stable tag. > > If you really want to catch this patch for this stable tag, please specify > your reason. > I will collect the community feedback and decide whether delay this stable > tag. > > Thanks > Liming > > -----邮件原件----- > > 发件人: bounce+27952+67620+4905953+8761045@groups.io > > <bounce+27952+67620+4905953+8761045@groups.io> 代表 Guo Dong > > 发送时间: 2020年11月17日 5:59 > > 收件人: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com>; gaoliming > > <gaoliming@byosoft.com.cn> > > 抄送: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > <benjamin.you@intel.com> > > 主题: Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > > from Payload > > > > > > Hi Liming, > > > > This patch is sent before the soft freeze and passed review. > > I would like to merge this patch into edk2-stable202011 tomorrow if there > is > > no additional feedback. > > > > And here is the PR and it passed all CI checks. > > https://github.com/tianocore/edk2/pull/1127 > > > > Thanks, > > Guo > > > > > > > -----Original Message----- > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Guo > > Dong > > > Sent: Sunday, November 15, 2020 5:35 PM > > > To: devel@edk2.groups.io > > > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > > <benjamin.you@intel.com> > > > Subject: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > > from > > > Payload > > > > > > Hi All, > > > > > > This patch removed UEFI payload PEI phase to make UEFI payload simple. > > > It uses UefiPayloadEntry module to bridge bootloader and DXE phase. > > > > > > Original DSC files UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > > are replaced by a single DSC UefiPayloadPkg.dsc. Pure IA32 support > > > is replaced by Pure X64 support. IA32 Entry point with X64 DXE phase > > > is still supported. > > > > > > Changes in V2: > > > Addressed all the review comments from Maurice. > > > Fixed debug msg in UefiPayloadEntry. > > > Updated the Handoff HOB to DXE core to include Payload FV. > > > Synced the GHCB changes from DxeIpl to UefiPayloadEntry. > > > > > > V1: > > > It is not necessary to have a PEI phase in the UEFI payload since no > > > specific PEI task is required. This patch adds a UefiPayloadEntry > > > driver to get UEFI Payload required information from the bootloaders, > > > convert them into a HOB list, load DXE core and transfer control to it. > > > > > > Here is the change details: > > > 1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc. > > > 2) Added UefiPayloadEntry driver. this is the only driver before DXE > core. > > > 3) Added Pure X64 support, dropped Pure IA32 (Could add later if > required) > > > 64bit payload with 32bit entry point is still supported. > > > 4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build. > > > Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > > > > > Tested with SBL and coreboot on QEMU. > > > > > > Refs: https://github.com/tianocore/edk2/pull/1127 > > > > > > CC: maurice.ma@intel.com > > > CC: benjamin.you@intel.com > > > Signed-off-by: Guo Dong <guo.dong@intel.com> > > > > > > Guo Dong (1): > > > UefiPayloadPkg: Remove PEI phase from Payload > > > > > > UefiPayloadPkg/BlSupportPei/BlSupportPei.h | 39 - > > > UefiPayloadPkg/BlSupportPei/BlSupportPei.inf | 73 -- > > > UefiPayloadPkg/BuildAndIntegrationInstructions.txt | 32 +- > > > UefiPayloadPkg/Include/Library/BlParseLib.h | 4 +- > > > UefiPayloadPkg/Library/HobLib/Hob.c | 706 > > ++++++++++++++++ > > > UefiPayloadPkg/Library/HobLib/HobLib.inf | 39 + > > > UefiPayloadPkg/SecCore/FindPeiCore.c | 193 ----- > > > UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm | 78 -- > > > UefiPayloadPkg/SecCore/Ia32/Stack.nasm | 72 -- > > > UefiPayloadPkg/SecCore/SecCore.inf | 58 -- > > > UefiPayloadPkg/SecCore/SecMain.c | 288 ------- > > > UefiPayloadPkg/SecCore/SecMain.h | 131 --- > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c | 365 ++++++++ > > > .../UefiPayloadEntry/Ia32/IdtVectorAsm.nasm | 71 ++ > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm | 46 + > > > UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c | 307 +++++++ > > > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c | 201 +++++ > > > .../UefiPayloadEntry.c} | 451 ++++------ > > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h | 134 +++ > > > .../UefiPayloadEntry/UefiPayloadEntry.inf | 93 ++ > > > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c | 107 +++ > > > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm | 47 ++ > > > .../UefiPayloadEntry/X64/VirtualMemory.c | 939 > > > +++++++++++++++++++++ > > > .../UefiPayloadEntry/X64/VirtualMemory.h | 330 ++++++++ > > > UefiPayloadPkg/UefiPayloadPkg.dec | 5 +- > > > ...efiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} | 57 +- > > > UefiPayloadPkg/UefiPayloadPkg.fdf | 32 +- > > > UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 585 > > ------------- > > > 28 files changed, 3576 insertions(+), 1907 deletions(-) > > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.h > > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.inf > > > create mode 100644 UefiPayloadPkg/Library/HobLib/Hob.c > > > create mode 100644 UefiPayloadPkg/Library/HobLib/HobLib.inf > > > delete mode 100644 UefiPayloadPkg/SecCore/FindPeiCore.c > > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm > > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/Stack.nasm > > > delete mode 100644 UefiPayloadPkg/SecCore/SecCore.inf > > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.c > > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.h > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/IdtVectorAsm.nasm > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm > > > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c > > > rename UefiPayloadPkg/{BlSupportPei/BlSupportPei.c => > > > UefiPayloadEntry/UefiPayloadEntry.c} (52%) > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.inf > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.c > > > create mode 100644 > > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.h > > > rename UefiPayloadPkg/{UefiPayloadPkgIa32X64.dsc => > > UefiPayloadPkg.dsc} > > > (90%) > > > delete mode 100644 UefiPayloadPkg/UefiPayloadPkgIa32.dsc > > > > > > -- > > > 2.16.2.windows.1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload 2020-11-17 19:47 ` Guo Dong @ 2020-12-02 8:28 ` Patrick Rudolph 2020-12-02 23:14 ` Guo Dong 0 siblings, 1 reply; 6+ messages in thread From: Patrick Rudolph @ 2020-12-02 8:28 UTC (permalink / raw) To: devel, Dong, Guo; +Cc: gaoliming@byosoft.com.cn, Ma, Maurice, You, Benjamin Hello, This is a gentle reminder to merge this change to get a broader feedback from the community using the UefiPayloadPkg. Kind regards, Patrick Rudolph B.Sc. Electrical Engineering System Firmware Developer Patrick Rudolph B.Sc. Electrical Engineering System Firmware Developer 9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany Email: patrick.rudolph@9elements.com Phone: +49 234 68 94 188 Sitz der Gesellschaft: Bochum Handelsregister: Amtsgericht Bochum, HRB 17519 Geschäftsführung: Sebastian Deutsch, Eray Basar Datenschutzhinweise nach Art. 13 DSGVO Am Di., 17. Nov. 2020 um 20:47 Uhr schrieb Guo Dong <guo.dong@intel.com>: > > > Thanks Liming. If so it is OK to merge it after this stable tag. > > Thanks, > Guo > > > -----Original Message----- > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of gaoliming > > Sent: Monday, November 16, 2020 5:49 PM > > To: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com> > > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > <benjamin.you@intel.com> > > Subject: 回复: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > > from Payload > > > > Guo: > > This is a feature. So, please submit BZ for it. > > > > And, the first version patch is sent before soft feature freeze, and got > > comments. > > Then, the second version patch is sent and got reviewed after soft feature > > freeze. > > > > Based on > > https://github.com/tianocore/tianocore.github.io/wiki/SoftFeatureFreeze, > > this patch can't catch this stable tag. > > > > If you really want to catch this patch for this stable tag, please specify > > your reason. > > I will collect the community feedback and decide whether delay this stable > > tag. > > > > Thanks > > Liming > > > -----邮件原件----- > > > 发件人: bounce+27952+67620+4905953+8761045@groups.io > > > <bounce+27952+67620+4905953+8761045@groups.io> 代表 Guo Dong > > > 发送时间: 2020年11月17日 5:59 > > > 收件人: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com>; gaoliming > > > <gaoliming@byosoft.com.cn> > > > 抄送: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > > <benjamin.you@intel.com> > > > 主题: Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > > > from Payload > > > > > > > > > Hi Liming, > > > > > > This patch is sent before the soft freeze and passed review. > > > I would like to merge this patch into edk2-stable202011 tomorrow if there > > is > > > no additional feedback. > > > > > > And here is the PR and it passed all CI checks. > > > https://github.com/tianocore/edk2/pull/1127 > > > > > > Thanks, > > > Guo > > > > > > > > > > -----Original Message----- > > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Guo > > > Dong > > > > Sent: Sunday, November 15, 2020 5:35 PM > > > > To: devel@edk2.groups.io > > > > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > > > <benjamin.you@intel.com> > > > > Subject: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > > > from > > > > Payload > > > > > > > > Hi All, > > > > > > > > This patch removed UEFI payload PEI phase to make UEFI payload simple. > > > > It uses UefiPayloadEntry module to bridge bootloader and DXE phase. > > > > > > > > Original DSC files UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > > > are replaced by a single DSC UefiPayloadPkg.dsc. Pure IA32 support > > > > is replaced by Pure X64 support. IA32 Entry point with X64 DXE phase > > > > is still supported. > > > > > > > > Changes in V2: > > > > Addressed all the review comments from Maurice. > > > > Fixed debug msg in UefiPayloadEntry. > > > > Updated the Handoff HOB to DXE core to include Payload FV. > > > > Synced the GHCB changes from DxeIpl to UefiPayloadEntry. > > > > > > > > V1: > > > > It is not necessary to have a PEI phase in the UEFI payload since no > > > > specific PEI task is required. This patch adds a UefiPayloadEntry > > > > driver to get UEFI Payload required information from the bootloaders, > > > > convert them into a HOB list, load DXE core and transfer control to it. > > > > > > > > Here is the change details: > > > > 1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc. > > > > 2) Added UefiPayloadEntry driver. this is the only driver before DXE > > core. > > > > 3) Added Pure X64 support, dropped Pure IA32 (Could add later if > > required) > > > > 64bit payload with 32bit entry point is still supported. > > > > 4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build. > > > > Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > > > > > > > Tested with SBL and coreboot on QEMU. > > > > > > > > Refs: https://github.com/tianocore/edk2/pull/1127 > > > > > > > > CC: maurice.ma@intel.com > > > > CC: benjamin.you@intel.com > > > > Signed-off-by: Guo Dong <guo.dong@intel.com> > > > > > > > > Guo Dong (1): > > > > UefiPayloadPkg: Remove PEI phase from Payload > > > > > > > > UefiPayloadPkg/BlSupportPei/BlSupportPei.h | 39 - > > > > UefiPayloadPkg/BlSupportPei/BlSupportPei.inf | 73 -- > > > > UefiPayloadPkg/BuildAndIntegrationInstructions.txt | 32 +- > > > > UefiPayloadPkg/Include/Library/BlParseLib.h | 4 +- > > > > UefiPayloadPkg/Library/HobLib/Hob.c | 706 > > > ++++++++++++++++ > > > > UefiPayloadPkg/Library/HobLib/HobLib.inf | 39 + > > > > UefiPayloadPkg/SecCore/FindPeiCore.c | 193 ----- > > > > UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm | 78 -- > > > > UefiPayloadPkg/SecCore/Ia32/Stack.nasm | 72 -- > > > > UefiPayloadPkg/SecCore/SecCore.inf | 58 -- > > > > UefiPayloadPkg/SecCore/SecMain.c | 288 ------- > > > > UefiPayloadPkg/SecCore/SecMain.h | 131 --- > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c | 365 ++++++++ > > > > .../UefiPayloadEntry/Ia32/IdtVectorAsm.nasm | 71 ++ > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm | 46 + > > > > UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c | 307 +++++++ > > > > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c | 201 +++++ > > > > .../UefiPayloadEntry.c} | 451 ++++------ > > > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h | 134 +++ > > > > .../UefiPayloadEntry/UefiPayloadEntry.inf | 93 ++ > > > > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c | 107 +++ > > > > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm | 47 ++ > > > > .../UefiPayloadEntry/X64/VirtualMemory.c | 939 > > > > +++++++++++++++++++++ > > > > .../UefiPayloadEntry/X64/VirtualMemory.h | 330 ++++++++ > > > > UefiPayloadPkg/UefiPayloadPkg.dec | 5 +- > > > > ...efiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} | 57 +- > > > > UefiPayloadPkg/UefiPayloadPkg.fdf | 32 +- > > > > UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 585 > > > ------------- > > > > 28 files changed, 3576 insertions(+), 1907 deletions(-) > > > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.h > > > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.inf > > > > create mode 100644 UefiPayloadPkg/Library/HobLib/Hob.c > > > > create mode 100644 UefiPayloadPkg/Library/HobLib/HobLib.inf > > > > delete mode 100644 UefiPayloadPkg/SecCore/FindPeiCore.c > > > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm > > > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/Stack.nasm > > > > delete mode 100644 UefiPayloadPkg/SecCore/SecCore.inf > > > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.c > > > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.h > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/IdtVectorAsm.nasm > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm > > > > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c > > > > rename UefiPayloadPkg/{BlSupportPei/BlSupportPei.c => > > > > UefiPayloadEntry/UefiPayloadEntry.c} (52%) > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.inf > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.c > > > > create mode 100644 > > > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.h > > > > rename UefiPayloadPkg/{UefiPayloadPkgIa32X64.dsc => > > > UefiPayloadPkg.dsc} > > > > (90%) > > > > delete mode 100644 UefiPayloadPkg/UefiPayloadPkgIa32.dsc > > > > > > > > -- > > > > 2.16.2.windows.1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload 2020-12-02 8:28 ` Patrick Rudolph @ 2020-12-02 23:14 ` Guo Dong 0 siblings, 0 replies; 6+ messages in thread From: Guo Dong @ 2020-12-02 23:14 UTC (permalink / raw) To: Patrick Rudolph, devel@edk2.groups.io Cc: gaoliming@byosoft.com.cn, Ma, Maurice, You, Benjamin Thanks for the reminder. It was just merged. Please let me know if having issues with these change. Thanks, Guo > -----Original Message----- > From: Patrick Rudolph <patrick.rudolph@9elements.com> > Sent: Wednesday, December 2, 2020 1:29 AM > To: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com> > Cc: gaoliming@byosoft.com.cn; Ma, Maurice <maurice.ma@intel.com>; You, > Benjamin <benjamin.you@intel.com> > Subject: Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > from Payload > > Hello, > This is a gentle reminder to merge this change to get a broader > feedback from the community using the UefiPayloadPkg. > > Kind regards, > Patrick Rudolph > B.Sc. Electrical Engineering > System Firmware Developer > > Patrick Rudolph > B.Sc. Electrical Engineering > System Firmware Developer > > > 9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany > Email: patrick.rudolph@9elements.com > Phone: +49 234 68 94 188 > > Sitz der Gesellschaft: Bochum > Handelsregister: Amtsgericht Bochum, HRB 17519 > Geschäftsführung: Sebastian Deutsch, Eray Basar > > Datenschutzhinweise nach Art. 13 DSGVO > > > Am Di., 17. Nov. 2020 um 20:47 Uhr schrieb Guo Dong <guo.dong@intel.com>: > > > > > > Thanks Liming. If so it is OK to merge it after this stable tag. > > > > Thanks, > > Guo > > > > > -----Original Message----- > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of > gaoliming > > > Sent: Monday, November 16, 2020 5:49 PM > > > To: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com> > > > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > > <benjamin.you@intel.com> > > > Subject: 回复: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI > phase > > > from Payload > > > > > > Guo: > > > This is a feature. So, please submit BZ for it. > > > > > > And, the first version patch is sent before soft feature freeze, and got > > > comments. > > > Then, the second version patch is sent and got reviewed after soft feature > > > freeze. > > > > > > Based on > > > https://github.com/tianocore/tianocore.github.io/wiki/SoftFeatureFreeze, > > > this patch can't catch this stable tag. > > > > > > If you really want to catch this patch for this stable tag, please specify > > > your reason. > > > I will collect the community feedback and decide whether delay this stable > > > tag. > > > > > > Thanks > > > Liming > > > > -----邮件原件----- > > > > 发件人: bounce+27952+67620+4905953+8761045@groups.io > > > > <bounce+27952+67620+4905953+8761045@groups.io> 代表 Guo Dong > > > > 发送时间: 2020年11月17日 5:59 > > > > 收件人: devel@edk2.groups.io; Dong, Guo <guo.dong@intel.com>; > gaoliming > > > > <gaoliming@byosoft.com.cn> > > > > 抄送: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > > > <benjamin.you@intel.com> > > > > 主题: Re: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase > > > > from Payload > > > > > > > > > > > > Hi Liming, > > > > > > > > This patch is sent before the soft freeze and passed review. > > > > I would like to merge this patch into edk2-stable202011 tomorrow if there > > > is > > > > no additional feedback. > > > > > > > > And here is the PR and it passed all CI checks. > > > > https://github.com/tianocore/edk2/pull/1127 > > > > > > > > Thanks, > > > > Guo > > > > > > > > > > > > > -----Original Message----- > > > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Guo > > > > Dong > > > > > Sent: Sunday, November 15, 2020 5:35 PM > > > > > To: devel@edk2.groups.io > > > > > Cc: Ma, Maurice <maurice.ma@intel.com>; You, Benjamin > > > > > <benjamin.you@intel.com> > > > > > Subject: [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI > phase > > > > from > > > > > Payload > > > > > > > > > > Hi All, > > > > > > > > > > This patch removed UEFI payload PEI phase to make UEFI payload > simple. > > > > > It uses UefiPayloadEntry module to bridge bootloader and DXE phase. > > > > > > > > > > Original DSC files UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > > > > are replaced by a single DSC UefiPayloadPkg.dsc. Pure IA32 support > > > > > is replaced by Pure X64 support. IA32 Entry point with X64 DXE phase > > > > > is still supported. > > > > > > > > > > Changes in V2: > > > > > Addressed all the review comments from Maurice. > > > > > Fixed debug msg in UefiPayloadEntry. > > > > > Updated the Handoff HOB to DXE core to include Payload FV. > > > > > Synced the GHCB changes from DxeIpl to UefiPayloadEntry. > > > > > > > > > > V1: > > > > > It is not necessary to have a PEI phase in the UEFI payload since no > > > > > specific PEI task is required. This patch adds a UefiPayloadEntry > > > > > driver to get UEFI Payload required information from the bootloaders, > > > > > convert them into a HOB list, load DXE core and transfer control to it. > > > > > > > > > > Here is the change details: > > > > > 1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc. > > > > > 2) Added UefiPayloadEntry driver. this is the only driver before DXE > > > core. > > > > > 3) Added Pure X64 support, dropped Pure IA32 (Could add later if > > > required) > > > > > 64bit payload with 32bit entry point is still supported. > > > > > 4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 > build. > > > > > Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc > > > > > > > > > > Tested with SBL and coreboot on QEMU. > > > > > > > > > > Refs: https://github.com/tianocore/edk2/pull/1127 > > > > > > > > > > CC: maurice.ma@intel.com > > > > > CC: benjamin.you@intel.com > > > > > Signed-off-by: Guo Dong <guo.dong@intel.com> > > > > > > > > > > Guo Dong (1): > > > > > UefiPayloadPkg: Remove PEI phase from Payload > > > > > > > > > > UefiPayloadPkg/BlSupportPei/BlSupportPei.h | 39 - > > > > > UefiPayloadPkg/BlSupportPei/BlSupportPei.inf | 73 -- > > > > > UefiPayloadPkg/BuildAndIntegrationInstructions.txt | 32 +- > > > > > UefiPayloadPkg/Include/Library/BlParseLib.h | 4 +- > > > > > UefiPayloadPkg/Library/HobLib/Hob.c | 706 > > > > ++++++++++++++++ > > > > > UefiPayloadPkg/Library/HobLib/HobLib.inf | 39 + > > > > > UefiPayloadPkg/SecCore/FindPeiCore.c | 193 ----- > > > > > UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm | 78 -- > > > > > UefiPayloadPkg/SecCore/Ia32/Stack.nasm | 72 -- > > > > > UefiPayloadPkg/SecCore/SecCore.inf | 58 -- > > > > > UefiPayloadPkg/SecCore/SecMain.c | 288 ------- > > > > > UefiPayloadPkg/SecCore/SecMain.h | 131 --- > > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c | 365 ++++++++ > > > > > .../UefiPayloadEntry/Ia32/IdtVectorAsm.nasm | 71 ++ > > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm | 46 + > > > > > UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c | 307 +++++++ > > > > > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c | 201 +++++ > > > > > .../UefiPayloadEntry.c} | 451 ++++------ > > > > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h | 134 +++ > > > > > .../UefiPayloadEntry/UefiPayloadEntry.inf | 93 ++ > > > > > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c | 107 +++ > > > > > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm | 47 ++ > > > > > .../UefiPayloadEntry/X64/VirtualMemory.c | 939 > > > > > +++++++++++++++++++++ > > > > > .../UefiPayloadEntry/X64/VirtualMemory.h | 330 ++++++++ > > > > > UefiPayloadPkg/UefiPayloadPkg.dec | 5 +- > > > > > ...efiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} | 57 +- > > > > > UefiPayloadPkg/UefiPayloadPkg.fdf | 32 +- > > > > > UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 585 > > > > ------------- > > > > > 28 files changed, 3576 insertions(+), 1907 deletions(-) > > > > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.h > > > > > delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.inf > > > > > create mode 100644 UefiPayloadPkg/Library/HobLib/Hob.c > > > > > create mode 100644 UefiPayloadPkg/Library/HobLib/HobLib.inf > > > > > delete mode 100644 UefiPayloadPkg/SecCore/FindPeiCore.c > > > > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm > > > > > delete mode 100644 UefiPayloadPkg/SecCore/Ia32/Stack.nasm > > > > > delete mode 100644 UefiPayloadPkg/SecCore/SecCore.inf > > > > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.c > > > > > delete mode 100644 UefiPayloadPkg/SecCore/SecMain.h > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c > > > > > create mode 100644 > > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/IdtVectorAsm.nasm > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm > > > > > create mode 100644 UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c > > > > > rename UefiPayloadPkg/{BlSupportPei/BlSupportPei.c => > > > > > UefiPayloadEntry/UefiPayloadEntry.c} (52%) > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.inf > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.c > > > > > create mode 100644 > > > > UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.h > > > > > rename UefiPayloadPkg/{UefiPayloadPkgIa32X64.dsc => > > > > UefiPayloadPkg.dsc} > > > > > (90%) > > > > > delete mode 100644 UefiPayloadPkg/UefiPayloadPkgIa32.dsc > > > > > > > > > > -- > > > > > 2.16.2.windows.1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload
@ 2020-11-16 0:35 Guo Dong
0 siblings, 0 replies; 6+ messages in thread
From: Guo Dong @ 2020-11-16 0:35 UTC (permalink / raw)
To: devel; +Cc: maurice.ma, benjamin.you
Hi All,
This patch removed UEFI payload PEI phase to make UEFI payload simple.
It uses UefiPayloadEntry module to bridge bootloader and DXE phase.
Original DSC files UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
are replaced by a single DSC UefiPayloadPkg.dsc. Pure IA32 support
is replaced by Pure X64 support. IA32 Entry point with X64 DXE phase
is still supported.
Changes in V2:
Addressed all the review comments from Maurice.
Fixed debug msg in UefiPayloadEntry.
Updated the Handoff HOB to DXE core to include Payload FV.
Synced the GHCB changes from DxeIpl to UefiPayloadEntry.
V1:
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Refs: https://github.com/tianocore/edk2/pull/1127
CC: maurice.ma@intel.com
CC: benjamin.you@intel.com
Signed-off-by: Guo Dong <guo.dong@intel.com>
Guo Dong (1):
UefiPayloadPkg: Remove PEI phase from Payload
UefiPayloadPkg/BlSupportPei/BlSupportPei.h | 39 -
UefiPayloadPkg/BlSupportPei/BlSupportPei.inf | 73 --
UefiPayloadPkg/BuildAndIntegrationInstructions.txt | 32 +-
UefiPayloadPkg/Include/Library/BlParseLib.h | 4 +-
UefiPayloadPkg/Library/HobLib/Hob.c | 706 ++++++++++++++++
UefiPayloadPkg/Library/HobLib/HobLib.inf | 39 +
UefiPayloadPkg/SecCore/FindPeiCore.c | 193 -----
UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm | 78 --
UefiPayloadPkg/SecCore/Ia32/Stack.nasm | 72 --
UefiPayloadPkg/SecCore/SecCore.inf | 58 --
UefiPayloadPkg/SecCore/SecMain.c | 288 -------
UefiPayloadPkg/SecCore/SecMain.h | 131 ---
UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c | 365 ++++++++
.../UefiPayloadEntry/Ia32/IdtVectorAsm.nasm | 71 ++
UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm | 46 +
UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c | 307 +++++++
UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c | 201 +++++
.../UefiPayloadEntry.c} | 451 ++++------
UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h | 134 +++
.../UefiPayloadEntry/UefiPayloadEntry.inf | 93 ++
UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c | 107 +++
UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm | 47 ++
.../UefiPayloadEntry/X64/VirtualMemory.c | 939 +++++++++++++++++++++
.../UefiPayloadEntry/X64/VirtualMemory.h | 330 ++++++++
UefiPayloadPkg/UefiPayloadPkg.dec | 5 +-
...efiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} | 57 +-
UefiPayloadPkg/UefiPayloadPkg.fdf | 32 +-
UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 585 -------------
28 files changed, 3576 insertions(+), 1907 deletions(-)
delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.h
delete mode 100644 UefiPayloadPkg/BlSupportPei/BlSupportPei.inf
create mode 100644 UefiPayloadPkg/Library/HobLib/Hob.c
create mode 100644 UefiPayloadPkg/Library/HobLib/HobLib.inf
delete mode 100644 UefiPayloadPkg/SecCore/FindPeiCore.c
delete mode 100644 UefiPayloadPkg/SecCore/Ia32/SecEntry.nasm
delete mode 100644 UefiPayloadPkg/SecCore/Ia32/Stack.nasm
delete mode 100644 UefiPayloadPkg/SecCore/SecCore.inf
delete mode 100644 UefiPayloadPkg/SecCore/SecMain.c
delete mode 100644 UefiPayloadPkg/SecCore/SecMain.h
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/Ia32/DxeLoadFunc.c
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/Ia32/IdtVectorAsm.nasm
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/Ia32/SecEntry.nasm
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/LoadDxeCore.c
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/MemoryAllocation.c
rename UefiPayloadPkg/{BlSupportPei/BlSupportPei.c => UefiPayloadEntry/UefiPayloadEntry.c} (52%)
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.h
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/UefiPayloadEntry.inf
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/DxeLoadFunc.c
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/SecEntry.nasm
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.c
create mode 100644 UefiPayloadPkg/UefiPayloadEntry/X64/VirtualMemory.h
rename UefiPayloadPkg/{UefiPayloadPkgIa32X64.dsc => UefiPayloadPkg.dsc} (90%)
delete mode 100644 UefiPayloadPkg/UefiPayloadPkgIa32.dsc
--
2.16.2.windows.1
^ permalink raw reply [flat|nested] 6+ messages in threadend of thread, other threads:[~2020-12-02 23:14 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1647D5DAE0E6DDAF.27572@groups.io>
2020-11-16 21:58 ` [edk2-devel] [PATCH V2 0/1] UefiPayloadPkg: Remove PEI phase from Payload Guo Dong
2020-11-17 0:48 ` 回复: " gaoliming
2020-11-17 19:47 ` Guo Dong
2020-12-02 8:28 ` Patrick Rudolph
2020-12-02 23:14 ` Guo Dong
2020-11-16 0:35 Guo Dong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox