From: "Zhang, Shenglei" <shenglei.zhang@intel.com>
To: "Kinney, Michael D" <michael.d.kinney@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Subject: Re: [edk2-devel] [PATCH] BaseTools/GenBiosId: Add a new tool GenBiosId
Date: Fri, 31 May 2019 06:36:02 +0000 [thread overview]
Message-ID: <C0706E73DB8C124D9B9C38AA364E5D5E04C4363A@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <E92EE9817A31E24EB0585FDF735412F5B9D1E767@ORSMSX113.amr.corp.intel.com>
> -----Original Message-----
> From: Kinney, Michael D
> Sent: Wednesday, May 29, 2019 12:49 AM
> To: devel@edk2.groups.io; Zhang, Shenglei <shenglei.zhang@intel.com>;
> Kinney, Michael D <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [PATCH] BaseTools/GenBiosId: Add a new tool
> GenBiosId
>
> Could this tools be ported to Python using the python
> struct module to access C structures?
>
> The implementation may be much simpler if python was
> used for command line parsing. And this capability
> could also be provided as a python module to support
> direct access from pre/post build steps implemented in
> python.
>
I think it's feasible to using the python structure to substitute C structure.
I'll investigate on it.
Best Regards,
Shenglei
> Thanks,
>
> Mike
>
> > -----Original Message-----
> > From: devel@edk2.groups.io
> > [mailto:devel@edk2.groups.io] On Behalf Of Zhang,
> > Shenglei
> > Sent: Monday, May 27, 2019 6:32 PM
> > To: devel@edk2.groups.io
> > Subject: [edk2-devel] [PATCH] BaseTools/GenBiosId: Add
> > a new tool GenBiosId
> >
> > GenBiosId is a tool to generate the BIOS ID binary file
> > which uses
> > the data from the configuration file.
> > https://bugzilla.tianocore.org/show_bug.cgi?id=1846
> >
> > Signed-off-by: Shenglei Zhang
> > <shenglei.zhang@intel.com>
> > ---
> > BaseTools/Source/C/GenBiosId/GenBiosId.c | 627
> > +++++++++++++++++++++++
> > BaseTools/Source/C/GNUmakefile | 3 +-
> > BaseTools/Source/C/GenBiosId/BiosId.env | 27 +
> > BaseTools/Source/C/GenBiosId/GNUmakefile | 14 +
> > BaseTools/Source/C/GenBiosId/GenBiosId.h | 105 ++++
> > BaseTools/Source/C/GenBiosId/Makefile | 14 +
> > BaseTools/Source/C/Makefile | 3 +-
> > 7 files changed, 791 insertions(+), 2 deletions(-)
> > create mode 100644
> > BaseTools/Source/C/GenBiosId/GenBiosId.c
> > create mode 100644
> > BaseTools/Source/C/GenBiosId/BiosId.env
> > create mode 100644
> > BaseTools/Source/C/GenBiosId/GNUmakefile
> > create mode 100644
> > BaseTools/Source/C/GenBiosId/GenBiosId.h
> > create mode 100644
> > BaseTools/Source/C/GenBiosId/Makefile
> >
> > diff --git a/BaseTools/Source/C/GenBiosId/GenBiosId.c
> > b/BaseTools/Source/C/GenBiosId/GenBiosId.c
> > new file mode 100644
> > index 000000000000..21d71d4ebd51
> > --- /dev/null
> > +++ b/BaseTools/Source/C/GenBiosId/GenBiosId.c
> > @@ -0,0 +1,627 @@
> > +/** @file
> > +This tool generates the BIOS ID binary file using the
> > data from the configuration file.
> > +
> > +Copyright (c) 2015 - 2019, Intel Corporation. All
> > rights reserved.<BR>
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > +
> > +**/
> > +
> > +#include "GenBiosId.h"
> > +
> > +CHAR8 InputFileName[FILE_NAME_SIZE];
> > +CHAR8 OutputFileName[FILE_NAME_SIZE];
> > +CHAR8 OutputBatchFileName[FILE_NAME_SIZE];
> > +
> > +FILE *InputFile;
> > +FILE *OutputFile;
> > +FILE *OutputBatchFile;
> > +
> > +BIOS_ID_IMAGE BiosIdImage = {
> > + { '$', 'I', 'B', 'I', 'O', 'S', 'I', '$' },
> > + {
> > + { ATOU (' '), ATOU (' '), ATOU (' '), ATOU (' '),
> > ATOU (' '), ATOU (' '), ATOU (' ') },
> > + ATOU (' '),
> > + ATOU ('.'),
> > + { ATOU (' '), ATOU (' '), ATOU (' ') },
> > + ATOU ('.'),
> > + { ATOU ('0'), ATOU ('0'), ATOU ('0'), ATOU ('0')
> > },
> > + ATOU ('.'),
> > + ATOU (' '),
> > + { ATOU ('0'), ATOU ('0') },
> > + ATOU ('.'),
> > + { ATOU ('0'), ATOU ('0'), ATOU ('0'), ATOU ('0'),
> > ATOU ('0'),
> > + ATOU ('0'), ATOU ('0'), ATOU ('0'), ATOU ('0'),
> > ATOU ('0') },
> > + ATOU ('\0')
> > + }
> > +};
> > +
> > +VOID
> > +PrintBanner (
> > + VOID
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > +Arguments:
> > +
> > +Returns:
> > +
> > +--*/
> > +{
> > + printf ("\n");
> > + printf ("GenBiosId utility, version: v1.0 05/27/2018
> > \n");
> > + printf ("Copyright (c) 2019, Intel Corporation. All
> > rights reserved. \n");
> > + printf ("\n");
> > +}
> > +
> > +VOID
> > +PrintUsage (
> > + VOID
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > +Arguments:
> > +
> > +Returns:
> > +
> > +--*/
> > +{
> > + printf ("Usage:\n");
> > + printf ("GenBiosId -i ConfigFile -o OutputFile [-ob
> > OutputBatchFile] \n");
> > + printf ("\n");
> > +}
> > +
> > +CHAR8 *
> > +StripLeadingWhiteSpace (
> > + IN CHAR8 *StrInput
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > + Strip the leading whitespoace off the given ASCII
> > string.
> > +
> > +Arguments:
> > +
> > + StrInput - the ASCII string that should be
> > processed.
> > +
> > +Returns:
> > +
> > + A pointer to the first non-whitespace character in
> > the given string,
> > + or NULL if the string was all whitespace.
> > +
> > +--*/
> > +{
> > + if (StrInput == NULL) {
> > + return NULL;
> > + }
> > +
> > + while (*StrInput != 0) {
> > + if ((*StrInput == ' ') || (*StrInput == '\t') ||
> > (*StrInput == '\n')) {
> > + ++StrInput;
> > + } else {
> > + return StrInput;
> > + }
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +VOID
> > +ConvertToUnicode (
> > + IN CHAR8 *StrAscii,
> > + OUT CHAR16 *StrUnicode
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > + Convert the given ASCII string to Unicode without
> > appending terminating 0x0000.
> > +
> > +Arguments:
> > +
> > + StrAscii - the source ASCII string, null-
> > terminated.
> > +
> > + StrUnicode - the resulted Unicode string will be
> > put here, without the terminating 0x0000.
> > +
> > +Returns:
> > +
> > +--*/
> > +{
> > + if ((StrAscii == NULL) || (StrUnicode == NULL)) {
> > + return;
> > + }
> > +
> > + while (*StrAscii != 0) {
> > + *StrUnicode = ATOU (*StrAscii);
> > + ++StrAscii;
> > + ++StrUnicode;
> > + }
> > +}
> > +
> > +VOID
> > +FillTimeStamp (
> > + OUT CHAR16 *StrTimeStampUnicode
> > + )
> > +/*++
> > +
> > +Routine Description:
> > + The function generates the current timestamp in
> > "YYMMDDHHMM" format
> > + and puts it into the Unicode string supplied,
> > without the null-terminator.
> > +
> > +Arguments:
> > +
> > + StrTimeStampUnicode - The Unicode string which is
> > filled on return with the current timestamp.
> > +
> > +Returns:
> > +
> > +--*/
> > +{
> > + struct tm *Time;
> > + time_t CurTime;
> > + CHAR8 StrTime[11];
> > +
> > + //
> > + // Fetch the current time based on UTC timezone
> > + //
> > + time (&CurTime);
> > + Time = gmtime (&CurTime);
> > +
> > + if (NULL == Time) {
> > + return;
> > + }
> > +
> > + sprintf (
> > + StrTime,
> > + "%02d%02d%02d%02d%02d",
> > + (Time->tm_year + 1900) % 100, // Year is 1900-
> > based, need only 2 digits.
> > + Time->tm_mon + 1, // Month is zero
> > based.
> > + Time->tm_mday,
> > + Time->tm_hour,
> > + Time->tm_min
> > + );
> > +
> > + ConvertToUnicode (StrTime, StrTimeStampUnicode);
> > +}
> > +
> > +VOID
> > +ConvertToAscii (
> > + IN CHAR16 *StrUnicode,
> > + OUT CHAR8 *StrAscii
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > + Convert the given Unicode string to ASCII with
> > appending terminating 0x00.
> > +
> > +Arguments:
> > +
> > + StrUnicode - the source Unicode string, null-
> > terminated.
> > +
> > + StrAscii - the resulted ASCII string will be put
> > here, with the terminating 0x00.
> > +
> > +Returns:
> > +
> > +--*/
> > +{
> > + if ((StrUnicode == NULL) || (StrAscii == NULL)) {
> > + return;
> > + }
> > +
> > + while (*StrUnicode != 0) {
> > + *StrAscii = UTOA (*StrUnicode);
> > + ++StrUnicode;
> > + ++StrAscii;
> > + }
> > + *StrAscii = 0;
> > +}
> > +
> > +VOID
> > +PrintUnicodeString (
> > + IN CHAR16 *StrUnicode
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > + Print the given Unicode string.
> > +
> > +Arguments:
> > +
> > + StrUnicode - the null-terminated Unicode string to
> > print.
> > +
> > +Returns:
> > +
> > +--*/
> > +{
> > + if (StrUnicode == NULL) {
> > + return;
> > + }
> > +
> > + while (*StrUnicode != 0) {
> > + putchar ((CHAR8)(*StrUnicode));
> > + ++StrUnicode;
> > + }
> > +}
> > +
> > +EFI_STATUS
> > +ParseInputFile (
> > + VOID
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > + Parse the BIOS ID definition file and fill the BIOS
> > ID structure, including timestamp.
> > +
> > +Arguments:
> > +
> > +Returns:
> > +
> > + EFI_SUCCESS - The input file was parsed
> > successfully.
> > +
> > + EFI_INVALID_PARAMETER - The input file has incorrect
> > format.
> > +
> > +--*/
> > +{
> > + CHAR8 StrLine[MAX_LINE_SIZE];
> > + CHAR8 StrFieldName[MAX_LINE_SIZE];
> > + CHAR8 StrFieldValue[MAX_LINE_SIZE];
> > + CHAR8 *Str;
> > + UINT16 FieldsSet;
> > + CHAR8 FormatString[MAX_FORMAT_STRING_SIZE];
> > +
> > + FieldsSet = 0;
> > + Str = NULL;
> > +
> > + //
> > + // Generate the format string for sscanf() function.
> > + //
> > + sprintf (FormatString, "%%%us = %%%us", (unsigned
> > int) sizeof (StrFieldName) - 1, (unsigned int) sizeof
> > (StrFieldValue) - 1);
> > +
> > + while (fgets (StrLine, sizeof (StrLine) - 1,
> > InputFile) != NULL) {
> > + Str = StripLeadingWhiteSpace (StrLine);
> > +
> > + //
> > + // Check for whitespace string.
> > + //
> > + if (Str == NULL) {
> > + continue;
> > + }
> > +
> > + //
> > + // Check for comment string.
> > + //
> > + if (*Str == '#') {
> > + continue;
> > + }
> > +
> > + if (sscanf (Str, FormatString, StrFieldName,
> > StrFieldValue) != 2) {
> > + continue;
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_BOARD_ID) == 0) {
> > + if (strlen (StrFieldValue) == CHARS_BOARD_ID) {
> > + ConvertToUnicode (StrFieldValue,
> > BiosIdImage.BiosIdString.BoardId);
> > + FieldsSet |= FIELD_BOARD_ID;
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_BOARD_ID, CHARS_BOARD_ID);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_BOARD_REV) == 0) {
> > + if (strlen (StrFieldValue) == CHARS_BOARD_REV) {
> > + ConvertToUnicode (StrFieldValue,
> > &(BiosIdImage.BiosIdString.BoardRev));
> > + FieldsSet |= FIELD_BOARD_REV;
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_BOARD_REV, CHARS_BOARD_REV);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_BOARD_EXT) == 0) {
> > + if (strlen (StrFieldValue) == CHARS_BOARD_EXT) {
> > + ConvertToUnicode (StrFieldValue,
> > BiosIdImage.BiosIdString.BoardExt);
> > + FieldsSet |= FIELD_BOARD_EXT;
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_BOARD_EXT, CHARS_BOARD_EXT);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_BUILD_TYPE) == 0) {
> > + if (strlen (StrFieldValue) == CHARS_BUILD_TYPE)
> > {
> > + if ((strcmp (StrFieldValue, "D") == 0) ||
> > + (strcmp (StrFieldValue, "A") == 0) ||
> > + (strcmp (StrFieldValue, "B") == 0) ||
> > + (strcmp (StrFieldValue, "P") == 0)) {
> > + ConvertToUnicode (StrFieldValue,
> > &(BiosIdImage.BiosIdString.BuildType));
> > + FieldsSet |= FIELD_BUILD_TYPE;
> > + } else {
> > + printf ("Error: value of %s should be one of
> > %s, %s, %s or %s\n", NAME_BUILD_TYPE, "D", "A", "B",
> > "P");
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_BUILD_TYPE,
> > CHARS_BUILD_TYPE);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_VERSION_MAJOR) ==
> > 0) {
> > + if (strlen (StrFieldValue) ==
> > CHARS_VERSION_MAJOR) {
> > + ConvertToUnicode (StrFieldValue,
> > BiosIdImage.BiosIdString.VersionMajor);
> > + FieldsSet |= FIELD_VERSION_MAJOR;
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_VERSION_MAJOR,
> > CHARS_VERSION_MAJOR);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_VERSION_MINOR) ==
> > 0) {
> > + if (strlen (StrFieldValue) ==
> > CHARS_VERSION_MINOR) {
> > + ConvertToUnicode (StrFieldValue,
> > BiosIdImage.BiosIdString.VersionMinor);
> > + FieldsSet |= FIELD_VERSION_MINOR;
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_VERSION_MINOR,
> > CHARS_VERSION_MINOR);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_DATE) == 0) {
> > + if (strlen (StrFieldValue) == CHARS_DATE) {
> > + ConvertToUnicode (StrFieldValue,
> > BiosIdImage.BiosIdString.TimeStamp);
> > + FieldsSet |= FIELD_DATE;
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_DATE, CHARS_DATE);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + if (strcmp (StrFieldName, NAME_TIME) == 0) {
> > + if (strlen (StrFieldValue) == CHARS_TIME) {
> > + ConvertToUnicode (StrFieldValue,
> > &(BiosIdImage.BiosIdString.TimeStamp[CHARS_DATE]));
> > + FieldsSet |= FIELD_TIME;
> > + } else {
> > + printf ("Error: value of %s should have
> > exactly %d chars\n", NAME_TIME, CHARS_TIME);
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + }
> > +
> > + if ((FieldsSet & (FIELD_DATE | FIELD_TIME)) !=
> > (FIELD_DATE | FIELD_TIME)) {
> > + //
> > + // Fill the timestamp.
> > + //
> > + FillTimeStamp
> > (BiosIdImage.BiosIdString.TimeStamp);
> > + FieldsSet |= (FIELD_DATE | FIELD_TIME);
> > + }
> > +
> > + //
> > + // Exit if not all fields were supplied.
> > + //
> > + if ((FieldsSet & FIELD_ALL) != FIELD_ALL) {
> > + return EFI_INVALID_PARAMETER;
> > + }
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +WriteOutputFile (
> > + VOID
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > + Write the BIOS ID structure to the output file.
> > +
> > +Arguments:
> > +
> > +Returns:
> > +
> > + EFI_SUCCESS - The output file was created
> > successfully.
> > +
> > + EFI_DEVICE_ERROR - There was a file write error.
> > +
> > +--*/
> > +{
> > + if (fwrite (&BiosIdImage, sizeof (BIOS_ID_IMAGE), 1,
> > OutputFile) != 1) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +WriteOutputBatchFile (
> > + VOID
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > + Write "SET BIOS_ID=" and BIOS ID string to the batch
> > file.
> > +
> > +Arguments:
> > +
> > +Returns:
> > +
> > + EFI_SUCCESS - The output batch file was
> > created successfully.
> > +
> > + EFI_DEVICE_ERROR - There was a file write error.
> > +
> > +--*/
> > +{
> > +#ifndef __GNUC__
> > + CHAR8 BatchFileContent[MAX_LINE_SIZE] = "SET
> > BIOS_ID=";
> > +#else
> > + CHAR8 BatchFileContent[MAX_LINE_SIZE] = "export
> > BIOS_ID=";
> > +#endif
> > +
> > + CHAR8 BiosIdString[sizeof (BIOS_ID_STRING)];
> > +
> > + ConvertToAscii ((CHAR16 *)
> > (&(BiosIdImage.BiosIdString)), BiosIdString);
> > + strcat (BatchFileContent, BiosIdString);
> > +
> > + if (fwrite (BatchFileContent, strlen
> > (BatchFileContent), 1, OutputBatchFile) != 1) {
> > + return EFI_DEVICE_ERROR;
> > + }
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +int
> > +main (
> > + IN int argc,
> > + IN CHAR8 *argv[]
> > + )
> > +/*++
> > +
> > +Routine Description:
> > +
> > +Arguments:
> > +
> > + argc - Number of command-line arguments.
> > +
> > + argv - Array of command-line arguments.
> > +
> > +Returns:
> > +
> > + 0 - The operation completed successfully.
> > +
> > + -1 - An error occurred.
> > +
> > +--*/
> > +{
> > + int Status;
> > +
> > + Status = 0;
> > +
> > + PrintBanner ();
> > +
> > + if ((argc != 5) && (argc != 7)) {
> > + PrintUsage ();
> > + Status = -1;
> > + goto Done;
> > + }
> > +
> > + if (strcmp (argv[1], "-i") == 0) {
> > + if (strlen (argv[2])> sizeof (InputFileName) - 1)
> > {
> > + printf ("The InputFileName %s is too long \n",
> > argv[2]);
> > + Status = -1;
> > + goto Done;
> > + }
> > + strncpy (InputFileName, argv[2], sizeof
> > (InputFileName) - 1);
> > + InputFileName[sizeof (InputFileName) - 1] = 0;
> > + } else {
> > + PrintUsage ();
> > + Status = -1;
> > + goto Done;
> > + }
> > +
> > + if (strcmp (argv[3], "-o") == 0) {
> > + if (strlen (argv[4])> sizeof (OutputFileName) - 1)
> > {
> > + printf ("OutputFileName %s is too long \n",
> > argv[4]);
> > + Status = -1;
> > + goto Done;
> > + }
> > + strncpy (OutputFileName, argv[4], sizeof
> > (OutputFileName) - 1);
> > + OutputFileName[sizeof (OutputFileName) - 1] = 0;
> > + } else {
> > + PrintUsage ();
> > + Status = -1;
> > + goto Done;
> > + }
> > +
> > + if (argc == 7) {
> > + if (strcmp (argv[5], "-ob") == 0) {
> > + if (strlen (argv[6])> sizeof
> > (OutputBatchFileName) - 1) {
> > + printf ("The OutputBatchFileName %s is too
> > long \n", argv[6]);
> > + Status = -1;
> > + goto Done;
> > + }
> > + strncpy (OutputBatchFileName, argv[6], sizeof
> > (OutputBatchFileName) - 1);
> > + OutputBatchFileName[sizeof (OutputBatchFileName)
> > - 1] = 0;
> > + } else {
> > + PrintUsage ();
> > + Status = -1;
> > + goto Done;
> > + }
> > + }
> > +
> > + InputFile = NULL;
> > + OutputFile = NULL;
> > + OutputBatchFile = NULL;
> > +
> > + InputFile = fopen (InputFileName, "r");
> > + if (InputFile == NULL) {
> > + printf ("Error opening input file: %s\n",
> > InputFileName);
> > + Status = -1;
> > + goto Done;
> > + }
> > +
> > + OutputFile = fopen (OutputFileName, "wb");
> > + if (OutputFile == NULL) {
> > + printf ("Error creating output file: %s\n",
> > OutputFileName);
> > + Status = -1;
> > + goto Done;
> > + }
> > +
> > + if (argc == 7) {
> > + OutputBatchFile = fopen (OutputBatchFileName,
> > "wb");
> > + if (OutputBatchFile == NULL) {
> > + printf ("Error creating output batch file:
> > %s\n", OutputBatchFileName);
> > + Status = -1;
> > + goto Done;
> > + }
> > + }
> > +
> > + if (ParseInputFile () != EFI_SUCCESS) {
> > + printf ("Invalid config file format: %s\n",
> > InputFileName);
> > + Status = -1;
> > + goto Done;
> > + }
> > +
> > + if (WriteOutputFile () != EFI_SUCCESS) {
> > + printf ("Can't write output file: %s\n",
> > OutputFileName);
> > + Status = -1;
> > + goto Done;
> > + }
> > +
> > + if (argc == 7) {
> > + if (WriteOutputBatchFile () != EFI_SUCCESS) {
> > + printf ("Can't write output batch file: %s\n",
> > OutputBatchFileName);
> > + Status = -1;
> > + goto Done;
> > + }
> > + }
> > +
> > + printf ("BIOS ID created: ");
> > + PrintUnicodeString ((CHAR16
> > *)(&(BiosIdImage.BiosIdString)));
> > + printf ("\n");
> > + printf ("BIOS ID binary file created: %s\n",
> > OutputFileName);
> > +
> > +Done:
> > +
> > + if (InputFile != NULL) {
> > + fclose (InputFile);
> > + }
> > +
> > + if (OutputFile != NULL) {
> > + fclose (OutputFile);
> > + }
> > +
> > + if (OutputBatchFile != NULL) {
> > + fclose (OutputBatchFile);
> > + }
> > +
> > + return Status;
> > +}
> > +
> > diff --git a/BaseTools/Source/C/GNUmakefile
> > b/BaseTools/Source/C/GNUmakefile
> > index 37bcce519c7e..9dbf1a4b06db 100644
> > --- a/BaseTools/Source/C/GNUmakefile
> > +++ b/BaseTools/Source/C/GNUmakefile
> > @@ -1,7 +1,7 @@
> > ## @file
> > # GNU/Linux makefile for C tools build.
> > #
> > -# Copyright (c) 2007 - 2017, Intel Corporation. All
> > rights reserved.<BR>
> > +# Copyright (c) 2007 - 2019, Intel Corporation. All
> > rights reserved.<BR>
> > #
> > # SPDX-License-Identifier: BSD-2-Clause-Patent
> > #
> > @@ -47,6 +47,7 @@ VFRAUTOGEN = VfrCompile/VfrLexer.h
> > APPLICATIONS = \
> > BrotliCompress \
> > VfrCompile \
> > + GenBiosId \
> > EfiRom \
> > GenFfs \
> > GenFv \
> > diff --git a/BaseTools/Source/C/GenBiosId/BiosId.env
> > b/BaseTools/Source/C/GenBiosId/BiosId.env
> > new file mode 100644
> > index 000000000000..de54273107bd
> > --- /dev/null
> > +++ b/BaseTools/Source/C/GenBiosId/BiosId.env
> > @@ -0,0 +1,27 @@
> > +## @file
> > +# This file is used to define the BIOS ID parameters
> > of the build.
> > +# This file is processed by GenBiosId.
> > +# Here, it is just a template and can be customized
> > by user.
> > +#
> > +# BIOS ID string format:
> > +#
> > $(BOARD_ID)$(BOARD_REV).$(BOARD_EXT).$(VERSION_MAJOR).$
> > (BUILD_TYPE)$(VERSION_MINOR).YYMMDDHHMM
> > +# All fields must have a fixed length. YYMMDDHHMM is
> > UTC time.
> > +# Example: "OVMF.000.0008.D03.1501301017"
> > +#
> > +# If DATE is specified for YYMMDD and TIME is
> > specified for HHMM like below,
> > +# GenBiosId will use the value of DATE and TIME to
> > fill YYMMDDHHMM,
> > +# otherwise GenBiosId will fill YYMMDDHHMM with
> > current UTC time of the build machine.
> > +# DATE = 150130
> > +# TIME = 1017
> > +#
> > +# Copyright (c) 2015 - 2019, Intel Corporation. All
> > rights reserved.<BR>
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +
> > +BOARD_ID = OVMF
> > +BOARD_REV = 1
> > +BOARD_EXT = 000
> > +BUILD_TYPE = D
> > +VERSION_MAJOR = 0008
> > +VERSION_MINOR = 03
> > diff --git a/BaseTools/Source/C/GenBiosId/GNUmakefile
> > b/BaseTools/Source/C/GenBiosId/GNUmakefile
> > new file mode 100644
> > index 000000000000..90a918c13f96
> > --- /dev/null
> > +++ b/BaseTools/Source/C/GenBiosId/GNUmakefile
> > @@ -0,0 +1,14 @@
> > +## @file
> > +# makefile for building the GenBiosId utility.
> > +#
> > +# Copyright (c) 2015 - 2019, Intel Corporation. All
> > rights reserved.<BR>
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +##
> > +MAKEROOT ?= ..
> > +
> > +APPNAME = GenBiosId
> > +
> > +OBJECTS = GenBiosId.o
> > +
> > +include $(MAKEROOT)/Makefiles/app.makefile
> > diff --git a/BaseTools/Source/C/GenBiosId/GenBiosId.h
> > b/BaseTools/Source/C/GenBiosId/GenBiosId.h
> > new file mode 100644
> > index 000000000000..660fba77e90b
> > --- /dev/null
> > +++ b/BaseTools/Source/C/GenBiosId/GenBiosId.h
> > @@ -0,0 +1,105 @@
> > +/** @file
> > +Definitions for the GenBiosId tool.
> > +
> > +Copyright (c) 2015 - 2019, Intel Corporation. All
> > rights reserved.<BR>
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > +
> > +**/
> > +
> > +#ifndef _GEN_BIOS_ID_
> > +#define _GEN_BIOS_ID_
> > +
> > +#include <stdio.h>
> > +#include <stdlib.h>
> > +#include <string.h>
> > +#include <time.h>
> > +#include <Common/UefiBaseTypes.h>
> > +
> > +#define FILE_NAME_SIZE 256
> > +#define MAX_LINE_SIZE 256
> > +#define MAX_FORMAT_STRING_SIZE 64
> > +
> > +#define ATOU(a) (CHAR16) ((UINT8) (a))
> > +#define UTOA(a) (CHAR8) ((UINT16) (a))
> > +
> > +//
> > +// BIOS ID field names.
> > +//
> > +#define NAME_BOARD_ID "BOARD_ID"
> > +#define NAME_BOARD_REV "BOARD_REV"
> > +#define NAME_BOARD_EXT "BOARD_EXT"
> > +#define NAME_BUILD_TYPE "BUILD_TYPE"
> > +#define NAME_VERSION_MAJOR "VERSION_MAJOR"
> > +#define NAME_VERSION_MINOR "VERSION_MINOR"
> > +#define NAME_DATE "DATE"
> > +#define NAME_TIME "TIME"
> > +
> > +//
> > +// Number of ASCII characters in each field
> > +//
> > +#define CHARS_BOARD_ID 7
> > +#define CHARS_BOARD_REV 1
> > +#define CHARS_BOARD_EXT 3
> > +#define CHARS_BUILD_TYPE 1
> > +#define CHARS_VERSION_MAJOR 4
> > +#define CHARS_VERSION_MINOR 2
> > +#define CHARS_DATE 6
> > +#define CHARS_TIME 4
> > +
> > +#define FIELD_BOARD_ID 0x0001
> > +#define FIELD_BOARD_REV 0x0002
> > +#define FIELD_BOARD_EXT 0x0004
> > +#define FIELD_BUILD_TYPE 0x0008
> > +#define FIELD_VERSION_MAJOR 0x0010
> > +#define FIELD_VERSION_MINOR 0x0020
> > +#define FIELD_DATE 0x0040
> > +#define FIELD_TIME 0x0080
> > +
> > +#define FIELD_ALL ( \
> > + FIELD_BOARD_ID | \
> > + FIELD_BOARD_REV | \
> > + FIELD_BOARD_EXT | \
> > + FIELD_BUILD_TYPE | \
> > + FIELD_VERSION_MAJOR | \
> > + FIELD_VERSION_MINOR | \
> > + FIELD_DATE | \
> > + FIELD_TIME)
> > +
> > +//
> > +// BIOS ID string format:
> > +//
> > +//
> > $(BOARD_ID)$(BOARD_REV).$(BOARD_EXT).$(VERSION_MAJOR).$
> > (BUILD_TYPE)$(VERSION_MINOR).YYMMDDHHMM
> > +//
> > +// Example: "TRFTCRB1.000.0008.D03.1501301017"
> > +//
> > +// The format should be same as platform BIOS ID
> > definition
> > +//
> > +#pragma pack(1)
> > +
> > +typedef struct {
> > + CHAR16 BoardId[7]; // "TRFTCRB"
> > + CHAR16 BoardRev; // "1"
> > + CHAR16 Dot1; // "."
> > + CHAR16 BoardExt[3]; // "000"
> > + CHAR16 Dot2; // "."
> > + CHAR16 VersionMajor[4]; // "0008"
> > + CHAR16 Dot3; // "."
> > + CHAR16 BuildType; // "D"
> > + CHAR16 VersionMinor[2]; // "03"
> > + CHAR16 Dot4; // "."
> > + CHAR16 TimeStamp[10]; // "YYMMDDHHMM"
> > + CHAR16 NullTerminator; // 0x0000
> > +} BIOS_ID_STRING;
> > +
> > +//
> > +// A signature precedes the BIOS ID string in the FV
> > to enable search by external tools.
> > +//
> > +typedef struct {
> > + UINT8 Signature[8]; // "$IBIOSI$"
> > + BIOS_ID_STRING BiosIdString; //
> > "TRFTCRB1.000.0008.D03.1501301017"
> > +} BIOS_ID_IMAGE;
> > +
> > +#pragma pack()
> > +
> > +
> > +#endif // _GEN_BIOS_ID_
> > diff --git a/BaseTools/Source/C/GenBiosId/Makefile
> > b/BaseTools/Source/C/GenBiosId/Makefile
> > new file mode 100644
> > index 000000000000..967a1809b635
> > --- /dev/null
> > +++ b/BaseTools/Source/C/GenBiosId/Makefile
> > @@ -0,0 +1,14 @@
> > +## @file
> > +# makefile for building the GenBiosId utility.
> > +#
> > +# Copyright (c) 2015 - 2019, Intel Corporation. All
> > rights reserved.<BR>
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +!INCLUDE ..\Makefiles\ms.common
> > +
> > +APPNAME = GenBiosId
> > +
> > +OBJECTS = GenBiosId.obj
> > +
> > +!INCLUDE ..\Makefiles\ms.app
> > +
> > diff --git a/BaseTools/Source/C/Makefile
> > b/BaseTools/Source/C/Makefile
> > index 217fc2b91d7b..748565bba9ff 100644
> > --- a/BaseTools/Source/C/Makefile
> > +++ b/BaseTools/Source/C/Makefile
> > @@ -1,7 +1,7 @@
> > ## @file
> > # Windows makefile for C tools build.
> > #
> > -# Copyright (c) 2009 - 2018, Intel Corporation. All
> > rights reserved.<BR>
> > +# Copyright (c) 2009 - 2019, Intel Corporation. All
> > rights reserved.<BR>
> > # SPDX-License-Identifier: BSD-2-Clause-Patent
> > #
> > HOST_ARCH = IA32
> > @@ -12,6 +12,7 @@ LIBRARIES = Common
> > APPLICATIONS = \
> > VfrCompile \
> > BrotliCompress \
> > + GenBiosId \
> > EfiRom \
> > GenCrc32 \
> > GenFfs \
> > --
> > 2.18.0.windows.1
> >
> >
> >
next prev parent reply other threads:[~2019-05-31 6:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 1:32 [PATCH] BaseTools/GenBiosId: Add a new tool GenBiosId Zhang, Shenglei
2019-05-28 16:48 ` [edk2-devel] " Michael D Kinney
2019-05-31 6:36 ` Zhang, Shenglei [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-06-14 7:38 Zhang, Shenglei
2019-06-14 15:06 ` [edk2-devel] " Michael D Kinney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=C0706E73DB8C124D9B9C38AA364E5D5E04C4363A@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox