On Fri, 2 Dec 2022 at 06:25, Wu, Hao A <hao.a.wu@intel.com> wrote:

Hello,

I saw there are several CI check failures for this 4 patches:
https://github.com/tianocore/edk2/pull/3702

Could you help to resolve them? Thanks.

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean
> Rhodes
> Sent: Friday, December 2, 2022 4:25 AM
> To: devel@edk2.groups.io
> Cc: Matt DeVillier <matt.devillier@gmail.com>; Wu, Hao A
> <hao.a.wu@intel.com>; Ni, Ray <ray.ni@intel.com>; Rhodes, Sean
> <sean@starlabs.systems>
> Subject: [edk2-devel] [PATCH 1/4] MdeModulePkg/XhciDxe/XhciReg: Handle
> incorrect PSIV indices
>
> From: Matt DeVillier <matt.devillier@gmail.com>
>
> On some platforms, including Sky Lake and Kaby Lake, the PSIV (Protocol Speed
> ID Value) indicesare shared between Protocol Speed ID DWORD' in the
> extended capabilities registers for both USB2 (Full Speed) and USB3 (Super
> Speed).
>
> An example can be found below:
>
> XhcCheckUsbPortSpeedUsedPsic: checking for USB2 ext caps
> XhciPsivGetPsid: found 3 PSID entries
> XhciPsivGetPsid: looking for port speed 1
> XhciPsivGetPsid: PSIV 1 PSIE 2 PLT 0 PSIM 12
> XhciPsivGetPsid: PSIV 2 PSIE 1 PLT 0 PSIM 1500
> XhciPsivGetPsid: PSIV 3 PSIE 2 PLT 0 PSIM 480
> XhcCheckUsbPortSpeedUsedPsic: checking for USB3 ext caps
> XhciPsivGetPsid: found 3 PSID entries
> XhciPsivGetPsid: looking for port speed 1
> XhciPsivGetPsid: PSIV 1 PSIE 3 PLT 0 PSIM 5
> XhciPsivGetPsid: PSIV 2 PSIE 3 PLT 0 PSIM 10
> XhciPsivGetPsid: PSIV 34 PSIE 2 PLT 0 PSIM 1248
>
> The result is edk2 detecting USB2 devices as USB3 devices, which consequently
> causes enumeration to fail.
>
> To avoid incorrect detection, check the extended capability registers for USB2
> before USB3. If edk2 finds a match for a USB 2 device, don't check for USB 3.
>
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
> Change-Id: I5bcf32105ce85fda95b4ba98a5e420e8f522374c
> ---
> MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c | 36 +++++++++++++++-----------
> MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h | 1 +
> 2 files changed, 22 insertions(+), 15 deletions(-)
>
> diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> index 2b4a4b2444..c992323443 100644
> --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> @@ -698,25 +698,11 @@ XhcCheckUsbPortSpeedUsedPsic (
> SpField.Dword = 0; UsbSpeedIdMap = 0; - //- // Check xHCI Supported
> Protocol Capability, find the PSIV field to match- // PortSpeed definition when
> the Major Revision is 03h.- //- if (Xhc->Usb3SupOffset != 0xFFFFFFFF) {-
> SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed);- if
> (SpField.Dword != 0) {- //- // Found the corresponding PORTSC value in
> PSIV field of USB3 offset.- //- UsbSpeedIdMap =
> USB_PORT_STAT_SUPER_SPEED;- }- }- // // Check xHCI Supported Protocol
> Capability, find the PSIV field to match // PortSpeed definition when the Major
> Revision is 02h. //- if ((UsbSpeedIdMap == 0) && (Xhc->Usb2SupOffset !=
> 0xFFFFFFFF)) {+ if (Xhc->Usb2SupOffset != 0xFFFFFFFF) { SpField.Dword =
> XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset, PortSpeed); if (SpField.Dword != 0)
> { //@@ -733,6 +719,12 @@ XhcCheckUsbPortSpeedUsedPsic (
> // PSIM shows as default High-speed protocol, apply to High-speed
> mapping // UsbSpeedIdMap =
> USB_PORT_STAT_HIGH_SPEED;+ } else if (SpField.Data.Psim ==
> XHC_SUPPORTED_PROTOCOL_USB2_FULL_SPEED_PSIM) {+ //+ //
> PSIM shows as default Full-speed protocol, return 0+ // to ensure no port
> status set+ //+ return 0; } } else if (SpField.Data.Psie == 1)
> { //@@ -750,6 +742,20 @@ XhcCheckUsbPortSpeedUsedPsic (
> } } + //+ // Check xHCI Supported Protocol Capability, find the PSIV field to
> match+ // PortSpeed definition when the Major Revision is 03h.+ //+ if
> ((UsbSpeedIdMap == 0) && (Xhc->Usb3SupOffset != 0xFFFFFFFF)) {+
> SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed);+ if
> (SpField.Dword != 0) {+ //+ // Found the corresponding PORTSC value in
> PSIV field of USB3 offset.+ //+ UsbSpeedIdMap =
> USB_PORT_STAT_SUPER_SPEED;+ }+ }+ return UsbSpeedIdMap; } diff --git
> a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> index 5fe2ba4f0e..74ac6297ba 100644
> --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> @@ -85,6 +85,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> #define XHC_SUPPORTED_PROTOCOL_DW2_OFFSET 0x08 #define
> XHC_SUPPORTED_PROTOCOL_PSI_OFFSET 0x10 #define
> XHC_SUPPORTED_PROTOCOL_USB2_HIGH_SPEED_PSIM 480+#define
> XHC_SUPPORTED_PROTOCOL_USB2_FULL_SPEED_PSIM 12 #define
> XHC_SUPPORTED_PROTOCOL_USB2_LOW_SPEED_PSIM 1500 #pragma
> pack (1)--
> 2.37.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#96843): https://edk2.groups.io/g/devel/message/96843
> Mute This Topic: https://groups.io/mt/95391831/1768737
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [hao.a.wu@intel.com] -=-=-
> =-=-=-=
>