Re: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes

["Konstantin Aladyshev" <aladyshev22@gmail.com>]

Yes, I use QEMU to run OVMF in Linux (actually in WSL). Here is a
command that I use for launch:
```
qemu-system-x86_64 \
  -drive if=pflash,format=raw,file=Build/OvmfX64/RELEASE_GCC5/FV/OVMF.fd \
  -drive format=raw,file=fat:rw:~/UEFI_disk
  -vnc :1
```
So nothing explicit about the UARTs.

Best regards,
Konstantin Aladyshev

On Thu, Sep 22, 2022 at 7:12 PM Kinney, Michael D
<michael.d.kinney@intel.com> wrote:
>
> If the goal is to support a mix of graphical and serial consoles both with high text resolutions, then your patch is appropriate.
>
> It looks like you are observing some unexpected limitations in the OVMF console management.
>
> Perhaps the OVMF maintainers can provide some advice on how to configure OVMF with serial consoles disabled.
>
> Are you using QEMU to run OVMF?  Are you including UARTs in QEMU launch?
>
> Mike
>
> > -----Original Message-----
> > From: Konstantin Aladyshev <aladyshev22@gmail.com>
> > Sent: Thursday, September 22, 2022 1:23 AM
> > To: Kinney, Michael D <michael.d.kinney@intel.com>
> > Cc: devel@edk2.groups.io; Gao, Liming <gaoliming@byosoft.com.cn>; Wang, Jian J <jian.j.wang@intel.com>; Ni, Ray
> > <ray.ni@intel.com>
> > Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> >
> > > Is the issue that you are trying to solve supporting larger serial console modes or just wanting to use the largest possible
> > text mode at a given graphics resolution?
> >
> > I spotted this issue when I wanted to use the largest possible text
> > mode in UEFI shell at high graphics resolutions. Is it not enough
> > reason for this commit?
> >
> > > The other way to get full screen text on the graphical console is to disable the serial console in the Boot Maintenance
> > Manager.
> >
> > Can you please elaborate this? I've tried to disable UART in "Boot
> > Maintenance Manager -> Console Options" like this:
> > ```
> > Console Input Device Select:
> > PciRoot(0x0)/Pci(0x1,0x0)/Acpi(PNP0303,0x0)                         [X]
> > PciRoot(0x0)/Pci(0x1,0x0)/Serial(0x0)/Uart(115200,8,N,1)        [  ]
> >
> > Console Output Device Select:
> > PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100)                      [X]
> > PciRoot(0x0)/Pci(0x1,0x0)/Serial(0x0)/Uart(115200,8,N,1)        [  ]
> >
> > Console Standard Error Device Select:
> > PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100)                      [X]
> > PciRoot(0x0)/Pci(0x1,0x0)/Serial(0x0)/Uart(115200,8,N,1)        [  ]
> > ```
> > But after reset, the console is 80x25 and all UART options are checked again.
> >
> > Also there is a menu "Boot Maintenance Manager -> Console Options ->
> > Console Output Mode Select" that has "Set Console Output Mode", and it
> > is always "80x25" without any options for me.
> >
> > Best regards,
> > Konstantin Aladyshev
> >
> > On Wed, Sep 21, 2022 at 7:28 PM Kinney, Michael D
> > <michael.d.kinney@intel.com> wrote:
> > >
> > > The other way to get full screen text on graphical console is to disable the serial console
> > > in the Boot Maintenance Manager.
> > >
> > > If the serial console is disabled then ConSplitterDxe will only see the text modes supported
> > > by GraphicsConsoleDxe which will include these higher text modes.
> > >
> > > Is the issue that you are trying to solve supporting larger serial console modes or just
> > > wanting to use the largest possible text mode at a given graphics resolution?
> > >
> > > Mike
> > >
> > > > -----Original Message-----
> > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Konstantin Aladyshev
> > > > Sent: Wednesday, September 21, 2022 1:24 AM
> > > > To: Kinney, Michael D <michael.d.kinney@intel.com>
> > > > Cc: devel@edk2.groups.io; Gao, Liming <gaoliming@byosoft.com.cn>; Wang, Jian J <jian.j.wang@intel.com>; Ni, Ray
> > > > <ray.ni@intel.com>
> > > > Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > > >
> > > > I have tested it in the following way:
> > > > - launch OVMF in Linux and connect with vnc
> > > > - change resolution via the form browser (Device Manager -> OVMF
> > > > Platform Configuration) from the default 640x480 to the 1920x1080
> > > > - "reset"
> > > > - after the reset the system will boot to the 1920x1080 resolution and
> > > > text mode 80x25
> > > > - check "mode" command output
> > > >
> > > > Before the commit this command displays only these modes:
> > > > ```
> > > > Shell> mode
> > > > Available modes for console output device.
> > > >   Col    80 Row    25  *
> > > >   Col    80 Row    50
> > > >   Col   100 Row    31
> > > > ```
> > > > But with this commit the high resolution modes are present in the output:
> > > > ```
> > > > Shell> mode
> > > > Available modes for console output device.
> > > >   Col    80 Row    25  *
> > > >   Col    80 Row    50
> > > >   Col   100 Row    31
> > > >   Col   128 Row    40
> > > >   Col   160 Row    42
> > > >   Col   240 Row    56
> > > > ```
> > > > And in my case setting the appropriate "mode 240 56" at runtime works just fine:
> > > > ```
> > > > Shell> mode 240 56
> > > > ```
> > > > After that the text output starts using the full screen.
> > > >
> > > > Best regards,
> > > > Konstantin Aladyshev
> > > >
> > > > On Wed, Sep 21, 2022 at 4:46 AM Kinney, Michael D
> > > > <michael.d.kinney@intel.com> wrote:
> > > > >
> > > > > Tera Term works.
> > > > >
> > > > > Mike
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of gaoliming via groups.io
> > > > > > Sent: Tuesday, September 20, 2022 6:26 PM
> > > > > > To: Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io; aladyshev22@gmail.com
> > > > > > Cc: Wang, Jian J <jian.j.wang@intel.com>; Ni, Ray <ray.ni@intel.com>
> > > > > > Subject: 回复: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > > > > >
> > > > > > Konstantin:
> > > > > >   Do you try the terminal software (such as Putty) to display the text mode 160, 42 or 240, 56?
> > > > > >   I try Putty in my desktop. It can't display 240 * 56 in one screen.
> > > > > >
> > > > > > Thanks
> > > > > > Liming
> > > > > > > -----邮件原件-----
> > > > > > > 发件人: Kinney, Michael D <michael.d.kinney@intel.com>
> > > > > > > 发送时间: 2022年9月20日 5:02
> > > > > > > 收件人: devel@edk2.groups.io; aladyshev22@gmail.com; Kinney, Michael D
> > > > > > > <michael.d.kinney@intel.com>
> > > > > > > 抄送: Wang, Jian J <jian.j.wang@intel.com>; Gao, Liming
> > > > > > > <gaoliming@byosoft.com.cn>; Ni, Ray <ray.ni@intel.com>
> > > > > > > 主题: RE: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > > > > > >
> > > > > > > This looks like a reasonable update to support platforms that have both
> > > > > > > graphical consoles and serial consoles.
> > > > > > >
> > > > > > > Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
> > > > > > >
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > > > > > Konstantin Aladyshev
> > > > > > > > Sent: Monday, September 19, 2022 1:57 AM
> > > > > > > > To: devel@edk2.groups.io
> > > > > > > > Cc: Wang, Jian J <jian.j.wang@intel.com>; Gao, Liming
> > > > > > > <gaoliming@byosoft.com.cn>; Ni, Ray <ray.ni@intel.com>; Konstantin
> > > > > > > > Aladyshev <aladyshev22@gmail.com>
> > > > > > > > Subject: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > > > > > > >
> > > > > > > > The commit b807174fecacf4c9f8400cab4d6fb3f580284021
> > > > > > > > ("MdeModulePkg/GraphicsConsoleDxe: add modes") has added modes for
> > > > > > > the
> > > > > > > > high display resolutions. Support these modes in the TerminalDxe as
> > > > > > > > well, so it would be possible to select the text mode that would take
> > > > > > > > all the available screen space.
> > > > > > > >
> > > > > > > > Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
> > > > > > > > ---
> > > > > > > >  MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c | 3 +++
> > > > > > > >  1 file changed, 3 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > > b/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > > > index e2d779c783..6b7b970516 100644
> > > > > > > > --- a/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > > > +++ b/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > > > @@ -115,6 +115,9 @@ TERMINAL_CONSOLE_MODE_DATA
> > > > > > > mTerminalConsoleModeData[] = {
> > > > > > > >    { 80,  25 },
> > > > > > > >
> > > > > > > >    { 80,  50 },
> > > > > > > >
> > > > > > > >    { 100, 31 },
> > > > > > > >
> > > > > > > > +  { 128, 40 },
> > > > > > > >
> > > > > > > > +  { 160, 42 },
> > > > > > > >
> > > > > > > > +  { 240, 56 },
> > > > > > > >
> > > > > > > >    //
> > > > > > > >
> > > > > > > >    // New modes can be added here.
> > > > > > > >
> > > > > > > >    //
> > > > > > > >
> > > > > > > > --
> > > > > > > > 2.25.1
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > -=-=-=-=-=-=
> > > > > > > > Groups.io Links: You receive all messages sent to this group.
> > > > > > > > View/Reply Online (#93935):
> > > > > > > https://edk2.groups.io/g/devel/message/93935
> > > > > > > > Mute This Topic: https://groups.io/mt/93777396/1643496
> > > > > > > > Group Owner: devel+owner@edk2.groups.io
> > > > > > > > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > > > > > > [michael.d.kinney@intel.com]
> > > > > > > > -=-=-=-=-=-=
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > > 
> > > >
> > >