From: Ryan Harkin <ryan.harkin@linaro.org>
To: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Daniil Egranov <daniil.egranov@arm.com>,
edk2-devel-01 <edk2-devel@lists.01.org>,
alan@softiron.co.uk
Subject: Re: [PATCH] ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe: Set Marvell Yukon MAC address
Date: Thu, 8 Dec 2016 16:23:27 +0000 [thread overview]
Message-ID: <CAD0U-hJdG4NbXa8d5OqAMgz55PZgP6azAgjE6wYj6uJok0DTvQ@mail.gmail.com> (raw)
In-Reply-To: <CAD0U-h+Um_RqNCjEWj1jMSDgSmCf_QSwpaCcpaEnvo=LYvpQDA@mail.gmail.com>
Hi Leif,
On 2 November 2016 at 11:55, Ryan Harkin <ryan.harkin@linaro.org> wrote:
> On 1 November 2016 at 21:05, Leif Lindholm <leif.lindholm@linaro.org> wrote:
>> On Tue, Nov 01, 2016 at 05:55:11PM +0000, Ryan Harkin wrote:
>>> Hi Daniil,
>>>
>>> While looking for another patch, I found this on the maillist...
>>>
>>> On 6 October 2016 at 02:42, Daniil Egranov <daniil.egranov@arm.com> wrote:
>>> > The patch reads a valid MAC address form the Juno IOFPGA registers
>>> > and pushes it into onboard Marvell Yukon NIC.
>>> >
>>> > Contributed-under: TianoCore Contribution Agreement 1.0
>>> > Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
>
> Tested on Juno R0/1/2.
>
> Tested-by; Ryan Harkin <ryan.harkin@linaro.org>
>
>
>>> > ---
>>> > .../ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c | 141 +++++++++++++++++++++
>>> > .../Drivers/ArmJunoDxe/ArmJunoDxeInternal.h | 12 ++
>>> > 2 files changed, 153 insertions(+)
>>> >
>>> > diff --git a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c
>>> > index b97f044..0c5fbd0 100644
>>> > --- a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c
>>> > +++ b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c
>>> > @@ -17,6 +17,8 @@
>>> >
>>> > #include <Protocol/DevicePathFromText.h>
>>> > #include <Protocol/PciRootBridgeIo.h>
>>> > +#include <Protocol/PciIo.h>
>>> > +#include <IndustryStandard/Pci.h>
>>> >
>>> > #include <Guid/EventGroup.h>
>>> > #include <Guid/GlobalVariable.h>
>>> > @@ -68,6 +70,142 @@ STATIC CONST EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mPciRootComplexDevicePath = {
>>> >
>>> > EFI_EVENT mAcpiRegistration = NULL;
>>> >
>>> > +UINT32 SwapUINT32(UINT32 value)
>>> > +{
>>> > + value = ((value << 8) & 0xFF00FF00 ) | ((value >> 8) & 0xFF00FF );
>>> > + return (value << 16) | (value >> 16);
>>> > +}
>>> > +
>>> > +/**
>>> > + The function reads MAC address from Juno IOFPGA registers and writes it
>>> > + into Marvell Yukon NIC.
>>> > +**/
>>> > +STATIC
>>> > +EFI_STATUS
>>> > +ArmJunoSetNetworkMAC()
>>> > +{
>>> > +
>>> > + EFI_STATUS Status;
>>> > + UINTN HandleCount;
>>> > + EFI_HANDLE *HandleBuffer;
>>> > + UINTN HIndex;
>>> > + EFI_PCI_IO_PROTOCOL* PciIo;
>>> > + UINT64 PciID;
>>> > + UINT32 MacHigh;
>>> > + UINT32 MacLow;
>>> > + UINT32 PciRegBase;
>>> > + UINT64 OldPciAttributes;
>>> > + UINT64 AttrSupports;
>>> > + UINT8 *PciBarAttributes;
>>> > +
>>> > + Status = gBS->LocateHandleBuffer (ByProtocol,
>>> > + &gEfiPciIoProtocolGuid,
>>> > + NULL, &HandleCount, &HandleBuffer);
>>> > +
>>> > + if (!EFI_ERROR (Status)) {
>>> > + for (HIndex = 0; HIndex < HandleCount; ++HIndex) {
>>> > + Status = gBS->OpenProtocol (
>>> > + HandleBuffer[HIndex],
>>> > + &gEfiPciIoProtocolGuid,
>>> > + (VOID **) &PciIo,
>>> > + NULL,
>>> > + NULL,
>>> > + EFI_OPEN_PROTOCOL_GET_PROTOCOL);
>>> > +
>>> > + if (EFI_ERROR (Status)) {
>>> > + continue;
>>> > + }
>>> > +
>>> > + Status = PciIo->Pci.Read (
>>> > + PciIo,
>>> > + EfiPciIoWidthUint32,
>>> > + PCI_VENDOR_ID_OFFSET,
>>> > + 1,
>>> > + &PciID
>>> > + );
>>> > +
>>> > + if (EFI_ERROR (Status)) {
>>> > + continue;
>>> > + }
>>> > +
>>> > + if ((PciID & 0xFFFFFFFF) == JUNO_MARVELL_YUKON_ID) {
>>> > +
>>> > + // Read MAC address from IOFPGA
>>> > + MacHigh= MmioRead32 (ARM_JUNO_SYS_PCIGBE_H);
>>> > + MacLow = MmioRead32 (ARM_JUNO_SYS_PCIGBE_L);
>>> > +
>>> > + Status = PciIo->Attributes (
>>> > + PciIo,
>>> > + EfiPciIoAttributeOperationGet,
>>> > + 0,
>>> > + &OldPciAttributes
>>> > + );
>>> > +
>>> > + if (EFI_ERROR (Status)) {
>>> > + continue;
>>> > + }
>>> > +
>>> > + Status = PciIo->Attributes (
>>> > + PciIo,
>>> > + EfiPciIoAttributeOperationSupported,
>>> > + 0,
>>> > + &AttrSupports
>>> > + );
>>> > +
>>> > + if (!EFI_ERROR (Status)) {
>>> > + AttrSupports &= EFI_PCI_DEVICE_ENABLE;
>>> > + Status = PciIo->Attributes (
>>> > + PciIo,
>>> > + EfiPciIoAttributeOperationEnable,
>>> > + AttrSupports,
>>> > + NULL
>>> > + );
>>> > +
>>> > + Status = PciIo->GetBarAttributes (PciIo, 0, &AttrSupports, (VOID**)&PciBarAttributes);
>>> > + if (!EFI_ERROR (Status) && (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarAttributes)->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR)) {
>>> > + if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarAttributes)->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {
>>> > + if (!(((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarAttributes)->SpecificFlag & ACPI_SPECFLAG_PREFETCHABLE)) {
>>> > + PciRegBase = ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarAttributes)->AddrRangeMin;
>>> > +
>>> > + // Clear Software Reset
>>> > + MmioWrite16 (PciRegBase + R_CONTROL_STATUS, CS_RESET_CLR);
>>> > +
>>> > + // Convert to Marvell MAC Address register format
>>> > + MacHigh = SwapUINT32 ((MacHigh & 0xFFFF) << 16 |
>>> > + (MacLow & 0xFFFF0000) >> 16);
>>> > + MacLow = SwapUINT32 (MacLow) >> 16;
>>> > +
>>> > + // Set MAC Address
>>> > + MmioWrite8 (PciRegBase + R_TST_CTRL_1, TST_CFG_WRITE_ENABLE);
>>> > + MmioWrite32 (PciRegBase + R_MAC, MacHigh);
>>> > + MmioWrite32 (PciRegBase + R_MAC_MAINT, MacHigh);
>>> > + MmioWrite32 (PciRegBase + R_MAC + 4, MacLow);
>>> > + MmioWrite32 (PciRegBase + R_MAC_MAINT + 4, MacLow);
>>> > + MmioWrite8 (PciRegBase + R_TST_CTRL_1, TST_CFG_WRITE_DISABLE);
>>> > +
>>> > + // Soft reset
>>> > + MmioWrite16 (PciRegBase + R_CONTROL_STATUS, CS_RESET_SET);
>>> > + MmioWrite16 (PciRegBase + R_CONTROL_STATUS, CS_RESET_CLR);
>>> > +
>>> > + Status = EFI_SUCCESS;
>>> > + }
>>> > + }
>>> > + }
>>> > +
>>> > + PciIo->Attributes (
>>> > + PciIo,
>>> > + EfiPciIoAttributeOperationSet,
>>> > + OldPciAttributes,
>>> > + NULL
>>> > + );
>>> > + }
>>> > + }
>>> > + }
>>> > + }
>>> > +
>>> > + return Status;
>>> > +}
>>> > +
>>> > /**
>>> > Notification function of the event defined as belonging to the
>>> > EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in
>>> > @@ -106,6 +244,9 @@ OnEndOfDxe (
>>> >
>>> > Status = gBS->ConnectController (Handle, NULL, PciRootComplexDevicePath, FALSE);
>>> > ASSERT_EFI_ERROR (Status);
>>> > +
>>> > + Status = ArmJunoSetNetworkMAC();
>>> > + ASSERT_EFI_ERROR (Status);
>>> > }
>>> >
>>> > STATIC
>>> > diff --git a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxeInternal.h b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxeInternal.h
>>> > index 662c413..cb8fdf6 100644
>>> > --- a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxeInternal.h
>>> > +++ b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxeInternal.h
>>> > @@ -29,6 +29,18 @@
>>> >
>>> > #include <IndustryStandard/Acpi.h>
>>> >
>>> > +#define ACPI_SPECFLAG_PREFETCHABLE 0x06
>>> > +#define JUNO_MARVELL_YUKON_ID 0x438011AB /* Juno Marvell PCI Dev ID */
>>> > +#define TST_CFG_WRITE_ENABLE 0x02 /* Enable Config Write */
>>> > +#define TST_CFG_WRITE_DISABLE 0x00 /* Disable Config Write */
>>> > +#define CS_RESET_CLR 0x02 /* SW Reset Clear */
>>> > +#define CS_RESET_SET 0x00 /* SW Reset Set */
>>> > +#define R_CONTROL_STATUS 0x0004 /* Control/Status Register */
>>> > +#define R_MAC 0x0100 /* MAC Address */
>>> > +#define R_MAC_MAINT 0x0110 /* MAC Address Maintenance */
>>> > +#define R_TST_CTRL_1 0x0158 /* Test Control Register 1 */
>>> > +
>>> > +
>>> > EFI_STATUS
>>> > PciEmulationEntryPoint (
>>> > VOID
>>> > --
>>> > 2.7.4
>>> >
>>> > _______________________________________________
>>> > edk2-devel mailing list
>>> > edk2-devel@lists.01.org
>>> > https://lists.01.org/mailman/listinfo/edk2-devel
>>>
>>> This appears to be an updated version of the patch I've been using for
>>> a few months now:
>>>
>>> https://git.linaro.org/landing-teams/working/arm/edk2.git/commit/?id=cd9a7a18eebfd2c8683a5663ce6447d3800ccf9b
>>>
>>> Is the intention that this one should go upstream and I drop mine from
>>> my fork? If so, I guess I should test it.
>>
>> That would be ideal, yes.
>> If you can confirm it works as expected, I'll start nitpicking on the
>> code :)
>>
I see this one is not upstream and no nitpicking has taken place ;-)
Cheers,
Ryan.
next prev parent reply other threads:[~2016-12-08 16:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-06 1:42 [PATCH] ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe: Set Marvell Yukon MAC address Daniil Egranov
2016-11-01 17:55 ` Ryan Harkin
2016-11-01 21:05 ` Leif Lindholm
2016-11-02 11:55 ` Ryan Harkin
2016-12-08 16:23 ` Ryan Harkin [this message]
2016-12-08 16:48 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAD0U-hJdG4NbXa8d5OqAMgz55PZgP6azAgjE6wYj6uJok0DTvQ@mail.gmail.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox