From: "Masahisa Kojima" <masahisa.kojima@linaro.org>
To: Leif Lindholm <leif@nuviainc.com>
Cc: edk2-devel-groups-io <devel@edk2.groups.io>,
Ard Biesheuvel <ardb+tianocore@kernel.org>,
Graeme Gregory <graeme@nuviainc.com>,
Radoslaw Biernacki <rad@semihalf.com>,
Shashi Mallela <shashi.mallela@linaro.org>
Subject: Re: [PATCH edk2-platforms v2 1/4] SbsaQemu: Build infrastructure for StandaloneMm image
Date: Wed, 3 Mar 2021 09:27:33 +0900 [thread overview]
Message-ID: <CADQ0-X9kCb6MsOoCQ2kd9OnEgJ=6qfj5Mvc9=2OcEys-Us2cQw@mail.gmail.com> (raw)
In-Reply-To: <20210302141319.GA1664@vanye>
On Tue, 2 Mar 2021 at 23:13, Leif Lindholm <leif@nuviainc.com> wrote:
>
> On Tue, Mar 02, 2021 at 21:45:26 +0900, Masahisa Kojima wrote:
> > Hi Leif,
> >
> > Thank you for you comments.
> >
> > On Tue, 2 Mar 2021 at 02:05, Leif Lindholm <leif@nuviainc.com> wrote:
> > >
> > > On Mon, Mar 01, 2021 at 14:19:49 +0900, Masahisa Kojima wrote:
> > > > Add the build infrastructure for compilation of StandaloneMm image.
> > > >
> > > > Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
> > > > ---
> > > > .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc | 132 ++++++++++++++++++
> > >
> > > Please use --stat=1000 --stat-graph-width=20 when generating patches.
> >
> > Sorry I forgot to add these options, will be included in the next version.
> >
> > >
> > > > Platform/Qemu/SbsaQemu/SbsaQemu.fdf | 6 +-
> > >
> > > It is not immediately obvious to me why the pre-existing
> > > SbsaQemuStandaloneMm.dsc needs to change. Is this something that can
> > > be clarified in commit message?
> >
> > I probably does not understand your comment correctly, but
> > SbsaQemuStandaloneMm.dsc
> > is newly created file with this commit.
>
> Sorry, that's just my brain failure: I meant to say SbsaQemu.fdf.
SbsaQemu.fdf is modified to extend the FLASH0 region enough big to
contain StandaloneMM image(BL32).
I will note in the commit message in the next version.
Thanks,
Masahisa
>
> Regards,
>
> Leif
>
> > Thanks,
> > Masahisa
> >
> > >
> > > Best Regards,
> > >
> > > Leif
> > >
> > > > .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf | 93 ++++++++++++
> > > > 3 files changed, 228 insertions(+), 3 deletions(-)
> > > > create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > > > create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > > >
> > > > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > > > new file mode 100644
> > > > index 000000000000..87f5ee351eaa
> > > > --- /dev/null
> > > > +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > > > @@ -0,0 +1,132 @@
> > > > +#
> > > > +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> > > > +#
> > > > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > +#
> > > > +
> > > > +################################################################################
> > > > +#
> > > > +# Defines Section - statements that will be processed to create a Makefile.
> > > > +#
> > > > +################################################################################
> > > > +[Defines]
> > > > + PLATFORM_NAME = SbsaQemuStandaloneMm
> > > > + PLATFORM_GUID = A64CC0F5-7ACD-4975-BBE7-7EF6739C8668
> > > > + PLATFORM_VERSION = 1.0
> > > > + DSC_SPECIFICATION = 0x00010011
> > > > + OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
> > > > + SUPPORTED_ARCHITECTURES = AARCH64
> > > > + BUILD_TARGETS = DEBUG|RELEASE|NOOPT
> > > > + SKUID_IDENTIFIER = DEFAULT
> > > > + FLASH_DEFINITION = Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > > > + DEFINE DEBUG_MESSAGE = TRUE
> > > > +
> > > > + # LzmaF86
> > > > + DEFINE COMPRESSION_TOOL_GUID = D42AE6BD-1352-4bfb-909A-CA72A6EAE889
> > > > +
> > > > +################################################################################
> > > > +#
> > > > +# Library Class section - list of all Library Classes needed by this Platform.
> > > > +#
> > > > +################################################################################
> > > > +[LibraryClasses]
> > > > + #
> > > > + # Basic
> > > > + #
> > > > + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> > > > + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> > > > + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
> > > > + DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
> > > > + ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
> > > > + FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
> > > > + HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
> > > > + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> > > > + MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
> > > > + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
> > > > + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > > > + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> > > > + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> > > > + ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
> > > > +
> > > > + #
> > > > + # Entry point
> > > > + #
> > > > + StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
> > > > +
> > > > + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> > > > + StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
> > > > + ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
> > > > + CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
> > > > + PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf
> > > > +
> > > > + # ARM PL011 UART Driver
> > > > + PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
> > > > + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
> > > > + SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
> > > > +
> > > > + StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
> > > > +
> > > > + #
> > > > + # It is not possible to prevent the ARM compiler for generic intrinsic functions.
> > > > + # This library provides the instrinsic functions generate by a given compiler.
> > > > + # And NULL mean link this library into all ARM images.
> > > > + #
> > > > + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> > > > +
> > > > +[LibraryClasses.common.MM_STANDALONE]
> > > > + HobLib|StandaloneMmPkg/Library/StandaloneMmHobLib/StandaloneMmHobLib.inf
> > > > + MmServicesTableLib|MdePkg/Library/StandaloneMmServicesTableLib/StandaloneMmServicesTableLib.inf
> > > > + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmMemoryAllocationLib/StandaloneMmMemoryAllocationLib.inf
> > > > +
> > > > +################################################################################
> > > > +#
> > > > +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> > > > +#
> > > > +################################################################################
> > > > +[PcdsFixedAtBuild]
> > > > + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
> > > > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
> > > > + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
> > > > +
> > > > + ## PL011 - Serial Terminal
> > > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60040000
> > > > + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
> > > > +
> > > > + gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x2
> > > > +
> > > > +###################################################################################################
> > > > +#
> > > > +# Components Section - list of the modules and components that will be processed by compilation
> > > > +# tools and the EDK II tools to generate PE32/PE32+/Coff image files.
> > > > +#
> > > > +# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
> > > > +# into firmware volume images. This section is just a list of modules to compile from
> > > > +# source into UEFI-compliant binaries.
> > > > +# It is the FDF file that contains information on combining binary files into firmware
> > > > +# volume images, whose concept is beyond UEFI and is described in PI specification.
> > > > +# Binary modules do not need to be listed in this section, as they should be
> > > > +# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
> > > > +# Logo (Logo.bmp), and etc.
> > > > +# There may also be modules listed in this section that are not required in the FDF file,
> > > > +# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
> > > > +# generated for it, but the binary will not be put into any firmware volume.
> > > > +#
> > > > +###################################################################################################
> > > > +[Components.common]
> > > > + #
> > > > + # MM Core
> > > > + #
> > > > + StandaloneMmPkg/Core/StandaloneMmCore.inf
> > > > + StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> > > > +
> > > > +###################################################################################################
> > > > +#
> > > > +# BuildOptions Section - Define the module specific tool chain flags that should be used as
> > > > +# the default flags for a module. These flags are appended to any
> > > > +# standard flags that are defined by the build process. They can be
> > > > +# applied for any modules or only those modules with the specific
> > > > +# module style (EDK or EDKII) specified in [Components] section.
> > > > +#
> > > > +###################################################################################################
> > > > +[BuildOptions.AARCH64]
> > > > + GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
> > > > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> > > > index c35e3ed44054..b61ae1891233 100644
> > > > --- a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> > > > +++ b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> > > > @@ -21,10 +21,10 @@
> > > >
> > > > [FD.SBSA_FLASH0]
> > > > BaseAddress = 0x00000000
> > > > -Size = 0x00200000
> > > > +Size = 0x00400000
> > > > ErasePolarity = 1
> > > > BlockSize = 0x00001000
> > > > -NumBlocks = 0x200
> > > > +NumBlocks = 0x400
> > > >
> > > > ################################################################################
> > > > #
> > > > @@ -47,7 +47,7 @@ [FD.SBSA_FLASH0]
> > > > FILE = Platform/Qemu/Sbsa/bl1.bin
> > > >
> > > > # and FIP (BL2 + BL31)
> > > > -0x00008000|0x00020000
> > > > +0x00008000|0x00300000
> > > > FILE = Platform/Qemu/Sbsa/fip.bin
> > > >
> > > > ################################################################################
> > > > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > > > new file mode 100644
> > > > index 000000000000..a1acefcfb0a7
> > > > --- /dev/null
> > > > +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > > > @@ -0,0 +1,93 @@
> > > > +#
> > > > +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> > > > +#
> > > > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > +#
> > > > +
> > > > +################################################################################
> > > > +#
> > > > +# FD Section
> > > > +# The [FD] Section is made up of the definition statements and a
> > > > +# description of what goes into the Flash Device Image. Each FD section
> > > > +# defines one flash "device" image. A flash device image may be one of
> > > > +# the following: Removable media bootable image (like a boot floppy
> > > > +# image,) an Option ROM image (that would be "flashed" into an add-in
> > > > +# card,) a System "Flash" image (that would be burned into a system's
> > > > +# flash) or an Update ("Capsule") image that will be used to update and
> > > > +# existing system flash.
> > > > +#
> > > > +################################################################################
> > > > +
> > > > +[FD.STANDALONE_MM]
> > > > +BaseAddress = 0x20001000|gArmTokenSpaceGuid.PcdFdBaseAddress
> > > > +Size = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (14MiB).
> > > > +ErasePolarity = 1
> > > > +
> > > > +BlockSize = 0x00001000
> > > > +NumBlocks = 0x0e00
> > > > +
> > > > +0x00000000|0x00280000
> > > > +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> > > > +FV = FVMAIN_COMPACT
> > > > +
> > > > +[FV.FVMAIN_COMPACT]
> > > > +FvAlignment = 16
> > > > +ERASE_POLARITY = 1
> > > > +MEMORY_MAPPED = TRUE
> > > > +STICKY_WRITE = TRUE
> > > > +LOCK_CAP = TRUE
> > > > +LOCK_STATUS = TRUE
> > > > +WRITE_DISABLED_CAP = TRUE
> > > > +WRITE_ENABLED_CAP = TRUE
> > > > +WRITE_STATUS = TRUE
> > > > +WRITE_LOCK_CAP = TRUE
> > > > +WRITE_LOCK_STATUS = TRUE
> > > > +READ_DISABLED_CAP = TRUE
> > > > +READ_ENABLED_CAP = TRUE
> > > > +READ_STATUS = TRUE
> > > > +READ_LOCK_CAP = TRUE
> > > > +READ_LOCK_STATUS = TRUE
> > > > +
> > > > + INF StandaloneMmPkg/Core/StandaloneMmCore.inf
> > > > + INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> > > > +
> > > > +################################################################################
> > > > +#
> > > > +# Rules are use with the [FV] section's module INF type to define
> > > > +# how an FFS file is created for a given INF file. The following Rule are the default
> > > > +# rules for the different module type. User can add the customized rules to define the
> > > > +# content of the FFS file.
> > > > +#
> > > > +################################################################################
> > > > +
> > > > +
> > > > +############################################################################
> > > > +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
> > > > +############################################################################
> > > > +#
> > > > +#[Rule.Common.DXE_DRIVER]
> > > > +# FILE DRIVER = $(NAMED_GUID) {
> > > > +# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > > +# COMPRESS PI_STD {
> > > > +# GUIDED {
> > > > +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > > +# UI STRING="$(MODULE_NAME)" Optional
> > > > +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> > > > +# }
> > > > +# }
> > > > +# }
> > > > +#
> > > > +############################################################################
> > > > +
> > > > +[Rule.Common.MM_CORE_STANDALONE]
> > > > + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
> > > > + PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > > + }
> > > > +
> > > > +[Rule.Common.MM_STANDALONE]
> > > > + FILE MM_STANDALONE = $(NAMED_GUID) {
> > > > + SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > > + UI STRING="$(MODULE_NAME)" Optional
> > > > + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> > > > + }
> > > > --
> > > > 2.17.1
> > > >
next prev parent reply other threads:[~2021-03-03 0:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-01 5:19 [PATCH edk2-platforms v2 0/4] add MM based UEFI secure boot on SbsaQemu Masahisa Kojima
2021-03-01 5:19 ` [PATCH edk2-platforms v2 1/4] SbsaQemu: Build infrastructure for StandaloneMm image Masahisa Kojima
2021-03-01 17:05 ` Leif Lindholm
2021-03-02 12:45 ` Masahisa Kojima
2021-03-02 14:13 ` Leif Lindholm
2021-03-03 0:27 ` Masahisa Kojima [this message]
2021-03-01 5:19 ` [PATCH edk2-platforms v2 2/4] SbsaQemu: add MM based UEFI secure boot support Masahisa Kojima
2021-03-01 17:22 ` Leif Lindholm
2021-03-03 6:35 ` Masahisa Kojima
2021-03-01 5:19 ` [PATCH edk2-platforms v2 3/4] SbsaQemu: add standalone MM build instruction Masahisa Kojima
2021-03-01 17:23 ` Leif Lindholm
2021-03-01 5:19 ` [PATCH edk2-platforms v2 4/4] SbsaQemu: fix typo Masahisa Kojima
2021-03-01 17:24 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CADQ0-X9kCb6MsOoCQ2kd9OnEgJ=6qfj5Mvc9=2OcEys-Us2cQw@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox