From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ming Huang <ming.huang@linaro.org>
Cc: Linaro UEFI <linaro-uefi@lists.linaro.org>,
"edk2-devel (edk2-devel@lists.01.org)" <edk2-devel@lists.01.org>,
graeme.gregory@linaro.org, ard.biesheuvel@linaro.org,
michael.d.kinney@intel.com, lersek@redhat.com,
guoheyi@huawei.com, wanghuiqiang@huawei.com,
huangming23@huawei.com, zhangjinsong2@huawei.com,
huangdaode@hisilicon.com, john.garry@huawei.com,
xinliang.liu@linaro.org, Heyi Guo <heyi.guo@linaro.org>
Subject: Re: [PATCH edk2-platforms v3 32/36] Silicon/Hisilicon/Setup: Support SPCR table switch
Date: Thu, 23 Aug 2018 12:12:21 +0100 [thread overview]
Message-ID: <CAF7UmSyTC4ZXbdtvSFNVpJsuG_p0=gfaFdFYN6c21n6v5FjmNw@mail.gmail.com> (raw)
In-Reply-To: <a3330951-8145-c90b-e2f6-4813b219f0f8@linaro.org>
I don't see how it would be less risky to include new code rather than
using the existing and well-tested solution for the same problem.
On Thu, 23 Aug 2018, 11:51 Ming, <ming.huang@linaro.org> wrote:
> Hi Leif,
>
> Is it ok replace with ConsolePrefDxe after ERP 18.08?
>
>
> On 8/22/2018 10:49 AM, Ming wrote:
> >
> >
> > On 8/22/2018 5:11 AM, Leif Lindholm wrote:
> >> On Thu, Aug 16, 2018 at 08:12:35PM +0800, Ming Huang wrote:
> >>> If install SPCR table, KVM will not output while install or boot
> >>> some OS, like ubuntu, so add SPCR switch setup item and set it
> >>> disable by default.
> >>
> >> This one was supposed to be replaced with
> >> EmbeddedPkg/Drivers/ConsolePrefDxe, right?
> >
> > Yes, I will take a look ConsolePrefDxe and replace with it after ERP
> 18.08.
> >
> >>
> >> /
> >> Leif
> >>
> >>> Contributed-under: TianoCore Contribution Agreement 1.1
> >>> Signed-off-by: Ming Huang <ming.huang@linaro.org>
> >>> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
> >>> ---
> >>> Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatformDxe.inf |
> 1 +
> >>> Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c |
> 24 ++++++++++++++++++++
> >>> 2 files changed, 25 insertions(+)
> >>>
> >>> diff --git
> a/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatformDxe.inf
> b/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatformDxe.inf
> >>> index 281a4f2ebd..3d133aff85 100644
> >>> --- a/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatformDxe.inf
> >>> +++ b/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatformDxe.inf
> >>> @@ -51,6 +51,7 @@
> >>>
> >>> [Guids]
> >>> gHisiEfiMemoryMapGuid
> >>> + gOemConfigGuid
> >>>
> >>> [Pcd]
> >>> gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile ##
> CONSUMES
> >>> diff --git
> a/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
> b/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
> >>> index 54f49977c3..32878ca4f9 100644
> >>> --- a/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
> >>> +++ b/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
> >>> @@ -16,8 +16,10 @@
> >>> #include <Library/DebugLib.h>
> >>> #include <Library/HobLib.h>
> >>> #include <Library/HwMemInitLib.h>
> >>> +#include <Library/OemConfigData.h>
> >>> #include <Library/OemMiscLib.h>
> >>> #include <Library/UefiBootServicesTableLib.h>
> >>> +#include <Library/UefiRuntimeServicesTableLib.h>
> >>> #include <Library/UefiLib.h>
> >>>
> >>> #define CORECOUNT(X) ((X) * CORE_NUM_PER_SOCKET)
> >>> @@ -114,6 +116,25 @@ UpdateSlit (
> >>> return EFI_SUCCESS;
> >>> }
> >>>
> >>> +STATIC
> >>> +EFI_STATUS
> >>> +IsNeedSpcr (
> >>> + IN OUT EFI_ACPI_DESCRIPTION_HEADER *Table
> >>> + )
> >>> +{
> >>> + EFI_STATUS Status;
> >>> + OEM_CONFIG_DATA SetupData;
> >>> + UINTN DataSize = sizeof (OEM_CONFIG_DATA);
> >>> +
> >>> + Status = gRT->GetVariable (OEM_CONFIG_NAME, &gOemConfigGuid, NULL,
> &DataSize, &SetupData);
> >>> + if (!EFI_ERROR (Status) && (SetupData.EnableSpcr == FALSE)) {
> >>> + return EFI_ABORTED;
> >>> + }
> >>> +
> >>> + return EFI_SUCCESS;
> >>> +}
> >>> +
> >>> +
> >>> EFI_STATUS
> >>> UpdateAcpiTable (
> >>> IN OUT EFI_ACPI_DESCRIPTION_HEADER *TableHeader
> >>> @@ -130,6 +151,9 @@ UpdateAcpiTable (
> >>> case EFI_ACPI_6_0_SYSTEM_LOCALITY_INFORMATION_TABLE_SIGNATURE:
> >>> Status = UpdateSlit (TableHeader);
> >>> break;
> >>> + case EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE:
> >>> + Status = IsNeedSpcr (TableHeader);
> >>> + break;
> >>> }
> >>> return Status;
> >>> }
> >>> --
> >>> 2.17.0
> >>>
>
next prev parent reply other threads:[~2018-08-23 11:12 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-16 12:12 [PATCH edk2-platforms v3 00/36] Upload for D06 platform Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 01/36] Hisilicon/D0x: Unify FlashFvbDxe driver Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 02/36] Hisilicon/D0X: Rename the global variable gDS3231RtcDevice Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 03/36] Hisilicon/D06: Add several base file for D06 Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 04/36] Platform/Hisilicon/D06: Add M41T83RealTimeClockLib Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 05/36] Platform/Hisilicon/D06: Add edk2-non-osi components for D06 Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 06/36] Hisilicon/D06: Add OemMiscLibD06 Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 07/36] Silicon/Hisilicon/D06: Wait for all disk ready Ming Huang
2018-08-22 10:25 ` Leif Lindholm
2018-08-22 15:00 ` Ming
2018-08-16 12:12 ` [PATCH edk2-platforms v3 08/36] Silicon/Hisilicon/Acpi: Unify HisiAcipPlatformDxe Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 09/36] Hisilicon/D06: Add Debug Serial Port Init Driver Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 10/36] Hisilicon/D06: Add ACPI Tables for D06 Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 11/36] Hisilicon/D06: Add Hi1620OemConfigUiLib Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 12/36] Silicon/Hisilicon/D06: Stop watchdog Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 13/36] Hisilicon/I2C: Modify I2CLib.c for coding style Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 14/36] Silicon/Hisilicon/I2C: Refactor I2C library Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 15/36] Silicon/Hisilicon/D06: Fix I2C enable fail issue for D06 Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 16/36] Silicon/Hisilicon/D06: Add I2C delay for HNS auto config Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 17/36] Hisilicon/I2C: Fix a typo issue Ming Huang
2018-08-21 21:45 ` Leif Lindholm
2018-08-21 21:48 ` Leif Lindholm
2018-08-16 12:12 ` [PATCH edk2-platforms v3 18/36] Silicon/Hisilicon/D06: Optimize HNS config CDR post time Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 19/36] Silicon/Hisilicon/Setup: Add Setup Item "EnableGOP" Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 20/36] Hisilicon/Hi1620: Add ACPI PPTT table Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 21/36] Platform/Hisilicon/D06: Enable ACPI PPTT Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 22/36] Platform/Hisilicon/D06: Add OemNicLib Ming Huang
2018-08-22 14:55 ` Leif Lindholm
2018-08-16 12:12 ` [PATCH edk2-platforms v3 23/36] Platform/Hisilicon/D06: Add OemNicConfig2P Driver Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 24/36] Hisilicon/D0x: Update SMBIOS type9 info Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 25/36] Platform/Hisilicon/D06: Add EarlyConfigPeim peim Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 26/36] Platform/Hisilicon/D06: Add PciHostBridgeLib Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 27/36] Hisilicon/D06: add apei driver Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 28/36] Silicon/Hisilicon/D06: Add some Lpc macro to LpcLib.h Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 29/36] Platform/Hisilicon/D06: Add capsule upgrade support Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 30/36] Silicon/Hisilicon/D06: Modify for close slave core clock Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 31/36] Silicon/Hisilicon/D06: Add I2C Bus Exception handle function Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 32/36] Silicon/Hisilicon/Setup: Support SPCR table switch Ming Huang
2018-08-21 21:11 ` Leif Lindholm
[not found] ` <6cf5a20d-b648-1ae8-043d-75f241fc4123@linaro.org>
2018-08-23 10:50 ` Ming
2018-08-23 11:12 ` Leif Lindholm [this message]
2018-08-23 11:58 ` Ming
2018-08-16 12:12 ` [PATCH edk2-platforms v3 33/36] Silicon/Hisilicon/setup: Support SMMU switch Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 34/36] Hisilicon/D06: Add PciPlatformLib Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 35/36] Hisilicon/D06: Add edk2-non-osi Shell components Ming Huang
2018-08-16 12:12 ` [PATCH edk2-platforms v3 36/36] Platform/Hisilicon/D0x: Update version string to 18.08 Ming Huang
2018-08-17 12:23 ` [PATCH edk2-platforms v3 00/36] Upload for D06 platform Leif Lindholm
2018-08-18 6:20 ` Ming
2018-08-22 16:40 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAF7UmSyTC4ZXbdtvSFNVpJsuG_p0=gfaFdFYN6c21n6v5FjmNw@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox