From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ming Huang <ming.huang@linaro.org>
Cc: Linaro UEFI <linaro-uefi@lists.linaro.org>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Graeme Gregory <graeme.gregory@linaro.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
Laszlo Ersek <lersek@redhat.com>, Guoheyi <guoheyi@huawei.com>,
wanghuiqiang <wanghuiqiang@huawei.com>,
Ming Huang <huangming23@huawei.com>,
Jason Zhang <zhangjinsong2@huawei.com>,
Daode Huang <huangdaode@hisilicon.com>,
John Garry <john.garry@huawei.com>,
"xinliang.liu" <xinliang.liu@linaro.org>
Subject: Re: [PATCH edk2-platforms v4 10/31] Silicon/Hisilicon/D06: Wait for all disk ready
Date: Thu, 30 Aug 2018 17:51:43 +0100 [thread overview]
Message-ID: <CAF7UmSynOvUBAf=Yd2yiTFEDaGD7JNPpV0sffvYMdOsmc3+W0g@mail.gmail.com> (raw)
In-Reply-To: <20180823160743.45638-11-ming.huang@linaro.org>
On 23 August 2018 at 17:07, Ming Huang <ming.huang@linaro.org> wrote:
>
> This patch is relative to D06 SasDxe driver. The SasDxe set a
> variable to notice this libray. Here Wait for all disk ready
> for 15S at most.
>
> D06:
> For using straight-through hard disk backboard, some disk need
> 15 seconds to ready. Actually, wait less 15 seconds here(minus
> the time from end of SAS driver to here).
> For using expander backboard, wait less 6 seconds here(minus
> the time from end of SAS driver to here).
>
> D03/D05:
> As Sas driver don't install PLATFORM_SAS_NOTIFY Protocol, D03/D05
> will skip waiting here.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ming Huang <ming.huang@linaro.org>
> ---
>
Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
| 4 +++
> Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c
| 37 ++++++++++++++++++++
> 2 files changed, 41 insertions(+)
>
> diff --git
a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
> index 7a53befc44..415f8ee36e 100644
> ---
a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
> +++
b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
> @@ -36,6 +36,7 @@
> [Packages]
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + Silicon/Hisilicon/HisiliconNonOsi.dec
> Silicon/Hisilicon/HisiPkg.dec
>
> [LibraryClasses]
> @@ -49,6 +50,7 @@
> MemoryAllocationLib
> PcdLib
> PrintLib
> + TimerLib
> UefiBootManagerLib
> UefiBootServicesTableLib
> UefiLib
> @@ -67,8 +69,10 @@
> [Guids]
> gEfiEndOfDxeEventGroupGuid
> gEfiTtyTermGuid
> + gOemConfigGuid
This patch still adds a dependency on this guid, but it is not introduced
until 14/31, so it breaks the build at 10,11,12,13/31.
Also, it is not required for this patch. So introduce it only with the code
that first uses it.
/
Leif
>
> [Protocols]
> gEfiGenericMemTestProtocolGuid
> gEfiLoadedImageProtocolGuid
> gEsrtManagementProtocolGuid
> + gPlatformSasNotifyProtocolGuid
> diff --git
a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c
b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c
> index aa6db929ca..77295d0111 100644
> --- a/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c
> +++ b/Silicon/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c
> @@ -20,6 +20,7 @@
> #include <Library/BmcConfigBootLib.h>
> #include <Library/DevicePathLib.h>
> #include <Library/PcdLib.h>
> +#include <Library/TimerLib.h>
> #include <Library/UefiBootManagerLib.h>
> #include <Library/UefiLib.h>
> #include <Protocol/DevicePath.h>
> @@ -29,6 +30,7 @@
> #include <Protocol/LoadedImage.h>
> #include <Protocol/PciIo.h>
> #include <Protocol/PciRootBridgeIo.h>
> +#include <Protocol/PlatformSasNotify.h>
> #include <Guid/EventGroup.h>
> #include <Guid/TtyTerm.h>
>
> @@ -554,6 +556,40 @@ PlatformBootManagerBeforeConsole (
> PlatformRegisterOptionsAndKeys ();
> }
>
> +STATIC
> +VOID
> +WaitForDiskReady (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + UINT32 Index;
> + PLATFORM_SAS_NOTIFY *SasNotify;
> +
> + Status = gBS->LocateProtocol (
> + &gPlatformSasNotifyProtocolGuid,
> + NULL,
> + (VOID **)&SasNotify);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_INFO, "Locate SasPlatformNotify:%r\n", Status));
> + return;
> + }
> +
> + // Wait for 30 seconds at most.
> + for (Index = 0; Index < 30; Index++) {
> + Status = gBS->CheckEvent (SasNotify->WaitDiskEvent);
> + if (!EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_INFO, "WaitDiskEvent is signaled.\n"));
> + EfiBootManagerConnectAll ();
> + break;
> + }
> + DEBUG ((DEBUG_ERROR, "%a", Index == 0 ? "Wait for disk." : "."));
> + MicroSecondDelay (1000 * 1000);
> + }
> +
> + return;
> +}
> +
> /**
> Do the platform specific action after the console is ready
> Possible things that can be done in PlatformBootManagerAfterConsole:
> @@ -583,6 +619,7 @@ PlatformBootManagerAfterConsole (
> // Connect the rest of the devices.
> //
> EfiBootManagerConnectAll ();
> + WaitForDiskReady ();
>
> //
> // Enumerate all possible boot options.
> --
> 2.18.0
>
next prev parent reply other threads:[~2018-08-30 16:51 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-23 16:07 [PATCH edk2-platforms v4 00/31] Upload for D06 platform Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 01/31] Silicon/Hisilicon/Acpi: Move some macro to PlatformArch.h Ming Huang
2018-08-30 18:29 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 02/31] Silicon/Hisilicon/D0x: Move RAS " Ming Huang
2018-08-30 18:29 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 03/31] Silicon/Hisilicon: Fix I2CLib enable fail issue Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 04/31] Silicon/Hisilicon: Add I2CLib delay for HNS auto config Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 05/31] Silicon/Hisilicon: Optimize I2CLib for HNS config CDR time Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 06/31] Hisilicon/D06: Add several base file for D06 Ming Huang
2018-08-30 18:14 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 07/31] Platform/Hisilicon/D06: Add M41T83RealTimeClockLib Ming Huang
2018-08-30 19:00 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 08/31] Platform/Hisilicon/D06: Add edk2-non-osi components for D06 Ming Huang
2018-08-30 18:59 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 09/31] Hisilicon/D06: Add OemMiscLibD06 Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 10/31] Silicon/Hisilicon/D06: Wait for all disk ready Ming Huang
2018-08-30 16:51 ` Leif Lindholm [this message]
2018-08-23 16:07 ` [PATCH edk2-platforms v4 11/31] Silicon/Hisilicon/Acpi: Unify HisiAcpiPlatformDxe Ming Huang
2018-08-30 18:39 ` Leif Lindholm
2018-08-31 2:12 ` Ming
2018-08-23 16:07 ` [PATCH edk2-platforms v4 12/31] Hisilicon/D06: Add Debug Serial Port Init Driver Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 13/31] Hisilicon/D06: Add ACPI Tables for D06 Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 14/31] Hisilicon/D06: Add Hi1620OemConfigUiLib Ming Huang
2018-08-30 18:58 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 15/31] Silicon/Hisilicon/D06: Stop watchdog Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 16/31] Silicon/Hisilicon/Setup: Add Setup Item "EnableGOP" Ming Huang
2018-08-30 18:41 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 17/31] Hisilicon/Hi1620: Add ACPI PPTT table Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 18/31] Platform/Hisilicon/D06: Enable ACPI PPTT Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 19/31] Platform/Hisilicon/D06: Add OemNicLib Ming Huang
2018-08-30 18:45 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 20/31] Platform/Hisilicon/D06: Add OemNicConfig2P Driver Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 21/31] Hisilicon/D0x: Update SMBIOS type9 info Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 22/31] Platform/Hisilicon/D06: Add EarlyConfigPeim peim Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 23/31] Platform/Hisilicon/D06: Add PciHostBridgeLib Ming Huang
2018-08-23 16:07 ` [PATCH edk2-platforms v4 24/31] Hisilicon/D06: add apei driver Ming Huang
2018-08-30 18:47 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 25/31] Platform/Hisilicon/D06: Add capsule upgrade support Ming Huang
2018-08-30 18:49 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 26/31] Silicon/Hisilicon: Modify for close slave core clock Ming Huang
2018-08-30 18:50 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 27/31] Silicon/Hisilicon: Add I2C Bus Exception handle function Ming Huang
2018-08-30 18:51 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 28/31] Silicon/Hisilicon/Setup: Support SPCR table switch Ming Huang
2018-08-30 18:52 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 29/31] Silicon/Hisilicon/setup: Enable/disable SMMU Ming Huang
2018-08-30 18:55 ` Leif Lindholm
2018-08-23 16:07 ` [PATCH edk2-platforms v4 30/31] Hisilicon/D06: Add PciPlatformLib Ming Huang
2018-08-30 16:15 ` Leif Lindholm
2018-08-31 6:17 ` Ming
2018-08-23 16:07 ` [PATCH edk2-platforms v4 31/31] Platform/Hisilicon/D0x: Update version string to 18.08 Ming Huang
2018-08-30 20:20 ` [PATCH edk2-platforms v4 00/31] Upload for D06 platform Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAF7UmSynOvUBAf=Yd2yiTFEDaGD7JNPpV0sffvYMdOsmc3+W0g@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox