From: Sumit Garg <sumit.garg@linaro.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: edk2-devel@lists.01.org, tee-dev@lists.linaro.org,
Daniel Thompson <daniel.thompson@linaro.org>,
Jens Wiklander <jens.wiklander@linaro.org>,
Leif Lindholm <leif.lindholm@linaro.org>
Subject: Re: [PATCH 1/1] ArmPkg/OpteeLib: Add APIs to communicate with OP-TEE
Date: Mon, 27 Aug 2018 10:52:52 +0530 [thread overview]
Message-ID: <CAFA6WYMb=19N8-XnE3d8tiBoT+vtA67WqRhh2TUH_3b4P+SLJw@mail.gmail.com> (raw)
In-Reply-To: <CAKv+Gu9_KDDFEDFod2tFXm8v5bfnP_xHbOi_sbvBt0FARPZfpA@mail.gmail.com>
On Fri, 24 Aug 2018 at 18:48, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>
> Hi Sumit,
>
> On 24 August 2018 at 10:21, Sumit Garg <sumit.garg@linaro.org> wrote:
> > Add following APIs to communicate with OP-TEE static TA:
> > 1. OpteeInit
> > 2. OpteeOpenSession
> > 3. OpteeCloseSession
> > 4. OpteeInvokeFunc
> >
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Cc: Leif Lindholm <leif.lindholm@linaro.org>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > ---
> > ArmPkg/Include/Library/OpteeLib.h | 102 ++++++
> > ArmPkg/Library/OpteeLib/Optee.c | 358 +++++++++++++++++++++
> > ArmPkg/Library/OpteeLib/OpteeLib.inf | 2 +
> > ArmPkg/Library/OpteeLib/OpteeSmc.h | 43 +++
> > .../Include/IndustryStandard/GlobalPlatform.h | 60 ++--
> > 5 files changed, 531 insertions(+), 34 deletions(-)
> > create mode 100644 ArmPkg/Library/OpteeLib/OpteeSmc.h
> > copy ArmPkg/Include/Library/OpteeLib.h => MdePkg/Include/IndustryStandard/GlobalPlatform.h (53%)
> >
> > diff --git a/ArmPkg/Include/Library/OpteeLib.h b/ArmPkg/Include/Library/OpteeLib.h
> > index f65d8674d9b8..c323f49072f8 100644
> > --- a/ArmPkg/Include/Library/OpteeLib.h
> > +++ b/ArmPkg/Include/Library/OpteeLib.h
> > @@ -25,10 +25,112 @@
> > #define OPTEE_OS_UID2 0xaf630002
> > #define OPTEE_OS_UID3 0xa5d5c51b
> >
> > +#define OPTEE_MSG_ATTR_TYPE_NONE 0x0
> > +#define OPTEE_MSG_ATTR_TYPE_VALUE_INPUT 0x1
> > +#define OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT 0x2
> > +#define OPTEE_MSG_ATTR_TYPE_VALUE_INOUT 0x3
> > +#define OPTEE_MSG_ATTR_TYPE_MEM_INPUT 0x9
> > +#define OPTEE_MSG_ATTR_TYPE_MEM_OUTPUT 0xa
> > +#define OPTEE_MSG_ATTR_TYPE_MEM_INOUT 0xb
> > +
> > +#define OPTEE_MSG_ATTR_TYPE_MASK 0xff
> > +
> > +typedef struct {
> > + UINT64 BufPtr;
> > + UINT64 Size;
> > + UINT64 ShmRef;
> > +} OPTEE_MSG_PARAM_MEM;
> > +
> > +typedef struct {
> > + UINT64 A;
> > + UINT64 B;
> > + UINT64 C;
> > +} OPTEE_MSG_PARAM_VALUE;
> > +
> > +typedef struct {
> > + UINT64 Attr;
> > + union {
> > + OPTEE_MSG_PARAM_MEM Mem;
> > + OPTEE_MSG_PARAM_VALUE Value;
> > + } U;
> > +} OPTEE_MSG_PARAM;
> > +
> > +#define MAX_PARAMS 4
> > +
> > +typedef struct {
> > + UINT32 Cmd;
> > + UINT32 Func;
> > + UINT32 Session;
> > + UINT32 CancelId;
> > + UINT32 Pad;
> > + UINT32 Ret;
> > + UINT32 RetOrigin;
> > + UINT32 NumParams;
> > +
> > + // NumParams tells the actual number of element in Params
> > + OPTEE_MSG_PARAM Params[MAX_PARAMS];
> > +} OPTEE_MSG_ARG;
> > +
> > +#define OPTEE_UUID_LEN 16
> > +
> > +//
> > +// struct OPTEE_OPEN_SESSION_ARG - Open session argument
> > +// @Uuid: [in] UUID of the Trusted Application
> > +// @Session: [out] Session id
> > +// @Ret: [out] Return value
> > +// @RetOrigin [out] Origin of the return value
> > +//
> > +typedef struct {
> > + UINT8 Uuid[OPTEE_UUID_LEN];
> > + UINT32 Session;
> > + UINT32 Ret;
> > + UINT32 RetOrigin;
> > +} OPTEE_OPEN_SESSION_ARG;
> > +
>
> What I meant before was
>
> typedef struct {
> UINT8 Uuid[OPTEE_UUID_LEN]; // [in] UUID of the Trusted Application
> UINT32 Session; // [out] Session id
> UINT32 Ret; // [out] Return value
> UINT32 RetOrigin; // [out] Origin of the return value
> } OPTEE_OPEN_SESSION_ARG;
>
>
Sure, will use this format instead.
>
>
>
> > +//
> > +// struct OPTEE_INVOKE_FUNC_ARG - Invoke function argument
> > +// @Func: [in] Trusted Application function, specific to the TA
> > +// @Session: [in] Session id
> > +// @Ret: [out] Return value
> > +// @RetOrigin [out] Origin of the return value
> > +// @Params [inout] Parameters for function to be invoked
> > +//
> > +typedef struct {
> > + UINT32 Func;
> > + UINT32 Session;
> > + UINT32 Ret;
> > + UINT32 RetOrigin;
> > + OPTEE_MSG_PARAM Params[MAX_PARAMS];
> > +} OPTEE_INVOKE_FUNC_ARG;
> > +
> > BOOLEAN
> > EFIAPI
> > IsOpteePresent (
> > VOID
> > );
> >
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeInit (
> > + VOID
> > + );
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeOpenSession (
> > + IN OUT OPTEE_OPEN_SESSION_ARG *OpenSessionArg
> > + );
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeCloseSession (
> > + IN UINT32 Session
> > + );
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeInvokeFunc (
> > + IN OUT OPTEE_INVOKE_FUNC_ARG *InvokeFuncArg
> > + );
> > +
> > #endif
> > diff --git a/ArmPkg/Library/OpteeLib/Optee.c b/ArmPkg/Library/OpteeLib/Optee.c
> > index 574527f8b5ea..2111022d3662 100644
> > --- a/ArmPkg/Library/OpteeLib/Optee.c
> > +++ b/ArmPkg/Library/OpteeLib/Optee.c
> > @@ -14,11 +14,19 @@
> >
> > **/
> >
> > +#include <Library/ArmMmuLib.h>
> > #include <Library/ArmSmcLib.h>
> > +#include <Library/BaseMemoryLib.h>
> > #include <Library/BaseLib.h>
> > +#include <Library/DebugLib.h>
> > #include <Library/OpteeLib.h>
> >
> > #include <IndustryStandard/ArmStdSmc.h>
> > +#include <IndustryStandard/GlobalPlatform.h>
> > +#include <OpteeSmc.h>
> > +#include <Uefi.h>
> > +
> > +STATIC OPTEE_SHARED_MEMORY_INFO OpteeShmInfo = { 0 };
> >
> > /**
> > Check for OP-TEE presence.
> > @@ -31,6 +39,7 @@ IsOpteePresent (
> > {
> > ARM_SMC_ARGS ArmSmcArgs;
> >
> > + ZeroMem (&ArmSmcArgs, sizeof (ARM_SMC_ARGS));
> > // Send a Trusted OS Calls UID command
> > ArmSmcArgs.Arg0 = ARM_SMC_ID_TOS_UID;
> > ArmCallSmc (&ArmSmcArgs);
> > @@ -44,3 +53,352 @@ IsOpteePresent (
> > return FALSE;
> > }
> > }
> > +
> > +STATIC
> > +EFI_STATUS
> > +OpteeShmMemRemap (
> > + VOID
> > + )
> > +{
> > + ARM_SMC_ARGS ArmSmcArgs;
> > + EFI_PHYSICAL_ADDRESS Paddr;
> > + EFI_PHYSICAL_ADDRESS Start;
> > + EFI_PHYSICAL_ADDRESS End;
> > + EFI_STATUS Status;
> > + UINTN Size;
> > +
> > + ZeroMem (&ArmSmcArgs, sizeof (ARM_SMC_ARGS));
> > + ArmSmcArgs.Arg0 = OPTEE_SMC_GET_SHM_CONFIG;
> > +
> > + ArmCallSmc (&ArmSmcArgs);
> > + if (ArmSmcArgs.Arg0 != OPTEE_SMC_RETURN_OK) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE shared memory not supported\n"));
> > + return EFI_UNSUPPORTED;
> > + }
> > +
> > + if (ArmSmcArgs.Arg3 != OPTEE_SMC_SHM_CACHED) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE: Only normal cached shared memory supported\n"));
> > + return EFI_UNSUPPORTED;
> > + }
> > +
> > + Start = (ArmSmcArgs.Arg1 + SIZE_4KB - 1) & ~(SIZE_4KB - 1);
> > + End = (ArmSmcArgs.Arg1 + ArmSmcArgs.Arg2) & ~(SIZE_4KB - 1);
> > + Paddr = Start;
> > + Size = End - Start;
> > +
> > + if (Size < SIZE_4KB) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE shared memory too small\n"));
> > + return EFI_BUFFER_TOO_SMALL;
> > + }
> > +
> > + Status = ArmSetMemoryAttributes (Paddr, Size, EFI_MEMORY_WB);
> > + if (EFI_ERROR (Status)) {
> > + return Status;
> > + }
> > +
> > + OpteeShmInfo.Base = (UINTN)Paddr;
> > + OpteeShmInfo.Size = Size;
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeInit (
> > + VOID
> > + )
> > +{
> > + EFI_STATUS Status;
> > +
> > + if (!IsOpteePresent ()) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE not present\n"));
> > + return EFI_UNSUPPORTED;
> > + }
> > +
> > + Status = OpteeShmMemRemap ();
> > + if (EFI_ERROR (Status)) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE shared memory remap failed\n"));
> > + return Status;
> > + }
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +/**
> > + Does Standard SMC to OP-TEE in secure world.
> > +
> > + @param[in] Parg Physical address of message to pass to secure world
> > +
> > + @return 0 on success, secure world return code otherwise
> > +
> > +**/
> > +STATIC
> > +UINT32
> > +OpteeCallWithArg (
> > + IN EFI_PHYSICAL_ADDRESS Parg
> > + )
> > +{
> > + ARM_SMC_ARGS ArmSmcArgs;
> > +
> > + ZeroMem (&ArmSmcArgs, sizeof (ARM_SMC_ARGS));
> > + ArmSmcArgs.Arg0 = OPTEE_SMC_CALL_WITH_ARG;
> > + ArmSmcArgs.Arg1 = (UINT32)(Parg >> 32);
> > + ArmSmcArgs.Arg2 = (UINT32)Parg;
> > +
> > + while (TRUE) {
> > + ArmCallSmc (&ArmSmcArgs);
> > +
> > + if (ArmSmcArgs.Arg0 == OPTEE_SMC_RETURN_RPC_FOREIGN_INTR) {
> > + //
> > + // A foreign interrupt was raised while secure world was
> > + // executing, since they are handled in UEFI a dummy RPC is
> > + // performed to let UEFI take the interrupt through the normal
> > + // vector.
> > + //
> > + ArmSmcArgs.Arg0 = OPTEE_SMC_RETURN_FROM_RPC;
> > + } else {
> > + break;
> > + }
> > + }
> > +
> > + return ArmSmcArgs.Arg0;
> > +}
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeOpenSession (
> > + IN OUT OPTEE_OPEN_SESSION_ARG *OpenSessionArg
> > + )
> > +{
> > + OPTEE_MSG_ARG *MsgArg;
> > +
> > + MsgArg = NULL;
> > +
> > + if (OpteeShmInfo.Base == 0) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE not initialized\n"));
> > + return EFI_NOT_STARTED;
> > + }
> > +
> > + MsgArg = (OPTEE_MSG_ARG *)OpteeShmInfo.Base;
> > + ZeroMem (MsgArg, sizeof (OPTEE_MSG_ARG));
> > +
> > + MsgArg->Cmd = OPTEE_MSG_CMD_OPEN_SESSION;
> > +
> > + //
> > + // Initialize and add the meta parameters needed when opening a
> > + // session.
> > + //
> > + MsgArg->Params[0].Attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT |
> > + OPTEE_MSG_ATTR_META;
> > + MsgArg->Params[1].Attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT |
> > + OPTEE_MSG_ATTR_META;
> > + CopyMem (&MsgArg->Params[0].U.Value, OpenSessionArg->Uuid, OPTEE_UUID_LEN);
> > + ZeroMem (&MsgArg->Params[1].U.Value, OPTEE_UUID_LEN);
> > + MsgArg->Params[1].U.Value.C = TEE_LOGIN_PUBLIC;
> > +
> > + MsgArg->NumParams = 2;
> > +
> > + if (OpteeCallWithArg ((EFI_PHYSICAL_ADDRESS)MsgArg)) {
> > + MsgArg->Ret = TEEC_ERROR_COMMUNICATION;
> > + MsgArg->RetOrigin = TEEC_ORIGIN_COMMS;
> > + }
> > +
> > + OpenSessionArg->Session = MsgArg->Session;
> > + OpenSessionArg->Ret = MsgArg->Ret;
> > + OpenSessionArg->RetOrigin = MsgArg->RetOrigin;
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeCloseSession (
> > + IN UINT32 Session
> > + )
> > +{
> > + OPTEE_MSG_ARG *MsgArg;
> > +
> > + MsgArg = NULL;
> > +
> > + if (OpteeShmInfo.Base == 0) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE not initialized\n"));
> > + return EFI_NOT_STARTED;
> > + }
> > +
> > + MsgArg = (OPTEE_MSG_ARG *)OpteeShmInfo.Base;
> > + ZeroMem (MsgArg, sizeof (OPTEE_MSG_ARG));
> > +
> > + MsgArg->Cmd = OPTEE_MSG_CMD_CLOSE_SESSION;
> > + MsgArg->Session = Session;
> > +
> > + OpteeCallWithArg ((EFI_PHYSICAL_ADDRESS)MsgArg);
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +STATIC
> > +EFI_STATUS
> > +OpteeToMsgParam (
> > + OUT OPTEE_MSG_PARAM *MsgParams,
> > + IN UINT32 NumParams,
> > + IN OPTEE_MSG_PARAM *InParams
> > + )
> > +{
> > + UINT32 Idx;
> > + UINTN ParamShmAddr;
> > + UINTN ShmSize;
> > + UINTN Size;
> > +
> > + Size = (sizeof (OPTEE_MSG_ARG) + sizeof (UINT64) - 1) & ~(sizeof (UINT64) - 1);
> > + ParamShmAddr = OpteeShmInfo.Base + Size;
> > + ShmSize = OpteeShmInfo.Size - Size;
> > +
> > + for (Idx = 0; Idx < NumParams; Idx++) {
> > + CONST OPTEE_MSG_PARAM *Ip;
> > + OPTEE_MSG_PARAM *Mp;
> > + UINT32 Attr;
> > +
> > + Ip = InParams + Idx;
> > + Mp = MsgParams + Idx;
> > + Attr = Ip->Attr & OPTEE_MSG_ATTR_TYPE_MASK;
> > +
> > + switch (Attr) {
> > + case OPTEE_MSG_ATTR_TYPE_NONE:
> > + Mp->Attr = OPTEE_MSG_ATTR_TYPE_NONE;
> > + ZeroMem (&Mp->U, sizeof (Mp->U));
> > + break;
> > +
> > + case OPTEE_MSG_ATTR_TYPE_VALUE_INPUT:
> > + case OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT:
> > + case OPTEE_MSG_ATTR_TYPE_VALUE_INOUT:
> > + Mp->Attr = Attr;
> > + Mp->U.Value.A = Ip->U.Value.A;
> > + Mp->U.Value.B = Ip->U.Value.B;
> > + Mp->U.Value.C = Ip->U.Value.C;
> > + break;
> > +
> > + case OPTEE_MSG_ATTR_TYPE_MEM_INPUT:
> > + case OPTEE_MSG_ATTR_TYPE_MEM_OUTPUT:
> > + case OPTEE_MSG_ATTR_TYPE_MEM_INOUT:
> > + Mp->Attr = Attr;
> > +
> > + if (Ip->U.Mem.Size > ShmSize) {
> > + return EFI_OUT_OF_RESOURCES;
> > + }
> > +
> > + CopyMem ((VOID *)ParamShmAddr, (VOID *)Ip->U.Mem.BufPtr, Ip->U.Mem.Size);
> > + Mp->U.Mem.BufPtr = (UINT64)ParamShmAddr;
> > + Mp->U.Mem.Size = Ip->U.Mem.Size;
> > +
> > + Size = (Ip->U.Mem.Size + sizeof (UINT64) - 1) & ~(sizeof (UINT64) - 1);
> > + ParamShmAddr += Size;
> > + ShmSize -= Size;
> > + break;
> > +
> > + default:
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +STATIC
> > +EFI_STATUS
> > +OpteeFromMsgParam (
> > + OUT OPTEE_MSG_PARAM *OutParams,
> > + IN UINT32 NumParams,
> > + IN OPTEE_MSG_PARAM *MsgParams
> > + )
> > +{
> > + UINT32 Idx;
> > +
> > + for (Idx = 0; Idx < NumParams; Idx++) {
> > + OPTEE_MSG_PARAM *Op;
> > + CONST OPTEE_MSG_PARAM *Mp;
> > + UINT32 Attr;
> > +
> > + Op = OutParams + Idx;
> > + Mp = MsgParams + Idx;
> > + Attr = Mp->Attr & OPTEE_MSG_ATTR_TYPE_MASK;
> > +
> > + switch (Attr) {
> > + case OPTEE_MSG_ATTR_TYPE_NONE:
> > + Op->Attr = OPTEE_MSG_ATTR_TYPE_NONE;
> > + ZeroMem (&Op->U, sizeof (Op->U));
> > + break;
> > +
> > + case OPTEE_MSG_ATTR_TYPE_VALUE_INPUT:
> > + case OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT:
> > + case OPTEE_MSG_ATTR_TYPE_VALUE_INOUT:
> > + Op->Attr = Attr;
> > + Op->U.Value.A = Mp->U.Value.A;
> > + Op->U.Value.B = Mp->U.Value.B;
> > + Op->U.Value.C = Mp->U.Value.C;
> > + break;
> > +
> > + case OPTEE_MSG_ATTR_TYPE_MEM_INPUT:
> > + case OPTEE_MSG_ATTR_TYPE_MEM_OUTPUT:
> > + case OPTEE_MSG_ATTR_TYPE_MEM_INOUT:
> > + Op->Attr = Attr;
> > +
> > + if (Mp->U.Mem.Size > Op->U.Mem.Size) {
> > + return EFI_BAD_BUFFER_SIZE;
> > + }
> > +
> > + CopyMem ((VOID *)Op->U.Mem.BufPtr, (VOID *)Mp->U.Mem.BufPtr, Mp->U.Mem.Size);
> > + Op->U.Mem.Size = Mp->U.Mem.Size;
> > + break;
> > +
> > + default:
> > + return EFI_INVALID_PARAMETER;
> > + }
> > + }
> > +
> > + return EFI_SUCCESS;
> > +}
> > +
> > +EFI_STATUS
> > +EFIAPI
> > +OpteeInvokeFunc (
> > + IN OUT OPTEE_INVOKE_FUNC_ARG *InvokeFuncArg
> > + )
> > +{
> > + EFI_STATUS Status;
> > + OPTEE_MSG_ARG *MsgArg;
> > +
> > + MsgArg = NULL;
> > +
> > + if (OpteeShmInfo.Base == 0) {
> > + DEBUG ((DEBUG_WARN, "OP-TEE not initialized\n"));
> > + return EFI_NOT_STARTED;
> > + }
> > +
> > + MsgArg = (OPTEE_MSG_ARG *)OpteeShmInfo.Base;
> > + ZeroMem (MsgArg, sizeof (OPTEE_MSG_ARG));
> > +
> > + MsgArg->Cmd = OPTEE_MSG_CMD_INVOKE_COMMAND;
> > + MsgArg->Func = InvokeFuncArg->Func;
> > + MsgArg->Session = InvokeFuncArg->Session;
> > +
> > + Status = OpteeToMsgParam (MsgArg->Params, MAX_PARAMS, InvokeFuncArg->Params);
> > + if (Status)
> > + return Status;
> > +
> > + MsgArg->NumParams = MAX_PARAMS;
> > +
> > + if (OpteeCallWithArg ((EFI_PHYSICAL_ADDRESS)MsgArg)) {
> > + MsgArg->Ret = TEEC_ERROR_COMMUNICATION;
> > + MsgArg->RetOrigin = TEEC_ORIGIN_COMMS;
> > + }
> > +
> > + if (OpteeFromMsgParam (InvokeFuncArg->Params, MAX_PARAMS, MsgArg->Params)) {
> > + MsgArg->Ret = TEEC_ERROR_COMMUNICATION;
> > + MsgArg->RetOrigin = TEEC_ORIGIN_COMMS;
> > + }
> > +
> > + InvokeFuncArg->Ret = MsgArg->Ret;
> > + InvokeFuncArg->RetOrigin = MsgArg->RetOrigin;
> > +
> > + return EFI_SUCCESS;
> > +}
> > diff --git a/ArmPkg/Library/OpteeLib/OpteeLib.inf b/ArmPkg/Library/OpteeLib/OpteeLib.inf
> > index 5abd427379cc..e03054a7167d 100644
> > --- a/ArmPkg/Library/OpteeLib/OpteeLib.inf
> > +++ b/ArmPkg/Library/OpteeLib/OpteeLib.inf
> > @@ -23,11 +23,13 @@ [Defines]
> >
> > [Sources]
> > Optee.c
> > + OpteeSmc.h
> >
> > [Packages]
> > ArmPkg/ArmPkg.dec
> > MdePkg/MdePkg.dec
> >
> > [LibraryClasses]
> > + ArmMmuLib
> > ArmSmcLib
> > BaseLib
> > diff --git a/ArmPkg/Library/OpteeLib/OpteeSmc.h b/ArmPkg/Library/OpteeLib/OpteeSmc.h
> > new file mode 100644
> > index 000000000000..e2ea35784a0a
> > --- /dev/null
> > +++ b/ArmPkg/Library/OpteeLib/OpteeSmc.h
> > @@ -0,0 +1,43 @@
> > +/** @file
> > + OP-TEE SMC header file.
> > +
> > + Copyright (c) 2018, Linaro Ltd. All rights reserved.<BR>
> > +
> > + This program and the accompanying materials
> > + are licensed and made available under the terms and conditions of the BSD License
> > + which accompanies this distribution. The full text of the license may be found at
> > + http://opensource.org/licenses/bsd-license.php
> > +
> > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > +
> > +**/
> > +
> > +#ifndef _OPTEE_SMC_H_
> > +#define _OPTEE_SMC_H_
> > +
> > +/* Returned in Arg0 only from Trusted OS functions */
> > +#define OPTEE_SMC_RETURN_OK 0x0
> > +
> > +#define OPTEE_SMC_RETURN_FROM_RPC 0x32000003
> > +#define OPTEE_SMC_CALL_WITH_ARG 0x32000004
> > +#define OPTEE_SMC_GET_SHM_CONFIG 0xb2000007
> > +
> > +#define OPTEE_SMC_SHM_CACHED 1
> > +
> > +#define OPTEE_SMC_RETURN_RPC_FOREIGN_INTR 0xffff0004
> > +
> > +#define OPTEE_MSG_CMD_OPEN_SESSION 0
> > +#define OPTEE_MSG_CMD_INVOKE_COMMAND 1
> > +#define OPTEE_MSG_CMD_CLOSE_SESSION 2
> > +
> > +#define OPTEE_MSG_ATTR_META 0x100
> > +
> > +#define TEE_LOGIN_PUBLIC 0x0
> > +
> > +typedef struct {
> > + UINTN Base;
> > + UINTN Size;
> > +} OPTEE_SHARED_MEMORY_INFO;
> > +
> > +#endif
> > diff --git a/ArmPkg/Include/Library/OpteeLib.h b/MdePkg/Include/IndustryStandard/GlobalPlatform.h
> > similarity index 53%
> > copy from ArmPkg/Include/Library/OpteeLib.h
> > copy to MdePkg/Include/IndustryStandard/GlobalPlatform.h
> > index f65d8674d9b8..14c621d89971 100644
> > --- a/ArmPkg/Include/Library/OpteeLib.h
> > +++ b/MdePkg/Include/IndustryStandard/GlobalPlatform.h
>
> This has to go into a separate patch, and has to be cc'ed to the
> MdePkg maintainers as well.
>
Ok, will create a separate patch for this and cc MdePkg maintainers.
> > @@ -1,34 +1,26 @@
> > -/** @file
> > - OP-TEE specific header file.
> > -
> > - Copyright (c) 2018, Linaro Ltd. All rights reserved.<BR>
> > -
> > - This program and the accompanying materials
> > - are licensed and made available under the terms and conditions of the BSD License
> > - which accompanies this distribution. The full text of the license may be found at
> > - http://opensource.org/licenses/bsd-license.php
> > -
> > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > -
> > -**/
> > -
> > -#ifndef _OPTEE_H_
> > -#define _OPTEE_H_
> > -
> > -/*
> > - * The 'Trusted OS Call UID' is supposed to return the following UUID for
> > - * OP-TEE OS. This is a 128-bit value.
> > - */
> > -#define OPTEE_OS_UID0 0x384fb3e0
> > -#define OPTEE_OS_UID1 0xe7f811e3
> > -#define OPTEE_OS_UID2 0xaf630002
> > -#define OPTEE_OS_UID3 0xa5d5c51b
> > -
> > -BOOLEAN
> > -EFIAPI
> > -IsOpteePresent (
> > - VOID
> > - );
> > -
> > -#endif
> > +/** @file
> > + Standardized Global Platform header file.
> > +
>
> Can you please include some URL reference here?
>
Sure will add reference to Global Platform TEE Client Specification.
-Sumit
> > + Copyright (c) 2018, Linaro Ltd. All rights reserved.<BR>
> > +
> > + This program and the accompanying materials
> > + are licensed and made available under the terms and conditions of the BSD License
> > + which accompanies this distribution. The full text of the license may be found at
> > + http://opensource.org/licenses/bsd-license.php
> > +
> > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > +
> > +**/
> > +
> > +#ifndef _GLOBAL_PLATFORM_H_
> > +#define _GLOBAL_PLATFORM_H_
> > +
> > +#define TEEC_ORIGIN_COMMS 0x00000002
> > +
> > +#define TEEC_SUCCESS 0x00000000
> > +#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
> > +#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
> > +#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
> > +
> > +#endif
> > --
> > 2.7.4
> >
next prev parent reply other threads:[~2018-08-27 5:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-24 9:21 [PATCH 1/1] ArmPkg/OpteeLib: Add APIs to communicate with OP-TEE Sumit Garg
[not found] ` <f9970701-8edc-66d1-7272-a14d39e532f0@linaro.org>
2018-08-24 12:09 ` [Tee-dev] " Sumit Garg
[not found] ` <c8005328-f548-edb1-8ebc-a93452e3f229@linaro.org>
2018-08-24 12:21 ` Sumit Garg
2018-08-24 13:18 ` Ard Biesheuvel
2018-08-27 5:22 ` Sumit Garg [this message]
2018-08-24 16:20 ` Udit Kumar
2018-08-24 17:35 ` Ard Biesheuvel
2018-08-24 17:45 ` Udit Kumar
2018-08-24 18:03 ` Matteo Carlini
2018-08-27 9:58 ` Sumit Garg
2018-08-28 13:08 ` Achin Gupta
2018-08-28 16:34 ` Sumit Garg
2018-08-29 4:38 ` Udit Kumar
2018-08-29 5:41 ` Bhupesh Sharma
2018-08-29 7:44 ` Sumit Garg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFA6WYMb=19N8-XnE3d8tiBoT+vtA67WqRhh2TUH_3b4P+SLJw@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox