From: Bhupesh SHARMA <bhupesh.linux@gmail.com>
To: Leif Lindholm <leif.lindholm@linaro.org>
Cc: edk2-devel@lists.01.org, Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: Re: [PATCH V3 1/1] ArmPlatformPkg/TZASC: Allow specifying subregions to be disabled
Date: Sun, 29 Jan 2017 21:25:49 +0530 [thread overview]
Message-ID: <CAFTCetSGHt5fGsWatoWT=2P+K5=yc+r0WMLCXQgoZjWb1oze=Q@mail.gmail.com> (raw)
In-Reply-To: <20170126143633.GY25883@bivouac.eciton.net>
On Thu, Jan 26, 2017 at 8:06 PM, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> On Fri, Jan 20, 2017 at 05:10:45PM +0530, Bhupesh Sharma wrote:
>> ARM TZASC-380 IP provides a mechanism to split memory regions being
>> protected via it into eight equal-sized sub-regions. A bit-setting
>> allows the corresponding subregion to be disabled.
>>
>> Several NXP/FSL SoCs support the TZASC-380 IP block and allow
>> the DDR connected via the TZASC to be partitioned into regions
>> having different security settings and also allow subregions
>> to be disabled.
>>
>> This patch enables this support and can be used for SoCs which
>> support such a partition of DDR regions.
>>
>> Details of the 'subregion_disable' register can be viewed here:
>> http://infocenter.arm.com/help/topic/com.arm.doc.ddi0431c/CHDIGDCI.html
>>
>> Cc: Leif Lindholm <leif.lindholm@linaro.org>
>> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> Contributed-under: TianoCore Contribution Agreement 1.0
>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@nxp.com>
>> [bhupesh.linux@gmail.com : Added my gmail ID as the NXP one is no longer valid]
>> Signed-off-by: Bhupesh Sharma <bhupesh.linux@gmail.com>
>
> Thanks for the cleanup.
> I may actually delete that CTA9x4 lib once your platform gets in...
>
> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
>
> Pushed as 465663e.
Many thanks Leif.
Regards,
Bhupesh
>> ---
>> Changes from v2:
>> - Added more descriptive arrays as suggested by Leif
>>
>> .../Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c | 14 +++++++-------
>> ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c | 13 ++++++++++---
>> ArmPlatformPkg/Include/Drivers/ArmTrustzone.h | 19 ++++++++++++++++++-
>> 3 files changed, 35 insertions(+), 11 deletions(-)
>>
>> diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c
>> index 6fa0774f59f8..42d731ea98c9 100644
>> --- a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c
>> +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c
>> @@ -72,18 +72,18 @@ ArmPlatformSecTrustzoneInit (
>> // NOR Flash 0 non secure (BootMon)
>> TZASCSetRegion(ARM_VE_TZASC_BASE,1,TZASC_REGION_ENABLED,
>> ARM_VE_SMB_NOR0_BASE,0,
>> - TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
>> + TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW, 0);
>>
>> // NOR Flash 1. The first half of the NOR Flash1 must be secure for the secure firmware (sec_uefi.bin)
>> if (PcdGetBool (PcdTrustzoneSupport) == TRUE) {
>> //Note: Your OS Kernel must be aware of the secure regions before to enable this region
>> TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
>> ARM_VE_SMB_NOR1_BASE + SIZE_32MB,0,
>> - TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
>> + TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW, 0);
>> } else {
>> TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
>> ARM_VE_SMB_NOR1_BASE,0,
>> - TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
>> + TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW, 0);
>> }
>>
>> // Base of SRAM. Only half of SRAM in Non Secure world
>> @@ -92,22 +92,22 @@ ArmPlatformSecTrustzoneInit (
>> //Note: Your OS Kernel must be aware of the secure regions before to enable this region
>> TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
>> ARM_VE_SMB_SRAM_BASE,0,
>> - TZASC_REGION_SIZE_16MB, TZASC_REGION_SECURITY_NSRW);
>> + TZASC_REGION_SIZE_16MB, TZASC_REGION_SECURITY_NSRW, 0);
>> } else {
>> TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
>> ARM_VE_SMB_SRAM_BASE,0,
>> - TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
>> + TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW, 0);
>> }
>>
>> // Memory Mapped Peripherals. All in non secure world
>> TZASCSetRegion(ARM_VE_TZASC_BASE,4,TZASC_REGION_ENABLED,
>> ARM_VE_SMB_PERIPH_BASE,0,
>> - TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
>> + TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW, 0);
>>
>> // MotherBoard Peripherals and On-chip peripherals.
>> TZASCSetRegion(ARM_VE_TZASC_BASE,5,TZASC_REGION_ENABLED,
>> ARM_VE_SMB_MB_ON_CHIP_PERIPH_BASE,0,
>> - TZASC_REGION_SIZE_256MB, TZASC_REGION_SECURITY_NSRW);
>> + TZASC_REGION_SIZE_256MB, TZASC_REGION_SECURITY_NSRW, 0);
>> }
>>
>> /**
>> diff --git a/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c b/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c
>> index 070c0dcb5d4d..1f002198e552 100644
>> --- a/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c
>> +++ b/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c
>> @@ -87,20 +87,27 @@ TZASCSetRegion (
>> IN UINTN LowAddress,
>> IN UINTN HighAddress,
>> IN UINTN Size,
>> - IN UINTN Security
>> + IN UINTN Security,
>> + IN UINTN SubregionDisableMask
>> )
>> {
>> UINT32* Region;
>> + UINT32 RegionAttributes;
>>
>> if (RegionId > TZASCGetNumRegions(TzascBase)) {
>> return EFI_INVALID_PARAMETER;
>> }
>>
>> + RegionAttributes = TZASC_REGION_ATTR_SECURITY(Security) |
>> + TZASC_REGION_ATTR_SUBREG_DISABLE(SubregionDisableMask) |
>> + TZASC_REGION_ATTR_SIZE(Size) |
>> + TZASC_REGION_ATTR_ENABLE(Enabled);
>> +
>> Region = (UINT32*)((UINTN)TzascBase + TZASC_REGIONS_REG + (RegionId * 0x10));
>>
>> - MmioWrite32((UINTN)(Region), LowAddress&0xFFFF8000);
>> + MmioWrite32((UINTN)(Region), TZASC_REGION_SETUP_LO_ADDR(LowAddress));
>> MmioWrite32((UINTN)(Region+1), HighAddress);
>> - MmioWrite32((UINTN)(Region+2), ((Security & 0xF) <<28) | ((Size & 0x3F) << 1) | (Enabled & 0x1));
>> + MmioWrite32((UINTN)(Region+2), RegionAttributes);
>>
>> return EFI_SUCCESS;
>> }
>> diff --git a/ArmPlatformPkg/Include/Drivers/ArmTrustzone.h b/ArmPlatformPkg/Include/Drivers/ArmTrustzone.h
>> index 78e98aad535f..827b5cd568c1 100644
>> --- a/ArmPlatformPkg/Include/Drivers/ArmTrustzone.h
>> +++ b/ArmPlatformPkg/Include/Drivers/ArmTrustzone.h
>> @@ -71,6 +71,22 @@ TZPCClearDecProtBits (
>> #define TZASC_REGION_SECURITY_NSW 1
>> #define TZASC_REGION_SECURITY_NSRW (TZASC_REGION_SECURITY_NSR|TZASC_REGION_SECURITY_NSW)
>>
>> +/* Some useful masks */
>> +#define TZASC_REGION_SETUP_LO_ADDR_MASK 0xFFFF8000
>> +
>> +#define TZASC_REGION_ATTR_SECURITY_MASK 0xF
>> +#define TZASC_REGION_ATTR_SUBREG_DIS_MASK 0xFF
>> +#define TZASC_REGION_ATTR_SIZE_MASK 0x3F
>> +#define TZASC_REGION_ATTR_EN_MASK 0x1
>> +
>> +#define TZASC_REGION_SETUP_LO_ADDR(x) ((x) & TZASC_REGION_SETUP_LO_ADDR_MASK)
>> +
>> +#define TZASC_REGION_ATTR_SECURITY(x) (((x) & TZASC_REGION_ATTR_SECURITY_MASK) << 28)
>> +#define TZASC_REGION_ATTR_SUBREG_DISABLE(x) \
>> + (((x) & TZASC_REGION_ATTR_SUBREG_DIS_MASK) << 8)
>> +#define TZASC_REGION_ATTR_SIZE(x) (((x) & TZASC_REGION_ATTR_SIZE_MASK) << 1)
>> +#define TZASC_REGION_ATTR_ENABLE(x) ((x) & TZASC_REGION_ATTR_EN_MASK)
>> +
>> /**
>> FIXME: Need documentation
>> **/
>> @@ -82,7 +98,8 @@ TZASCSetRegion (
>> IN UINTN LowAddress,
>> IN UINTN HighAddress,
>> IN UINTN Size,
>> - IN UINTN Security
>> + IN UINTN Security,
>> + IN UINTN SubregionDisableMask
>> );
>>
>> #endif
>> --
>> 2.7.4
>>
next prev parent reply other threads:[~2017-01-29 15:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 11:40 [PATCH V3 1/1] ArmPlatformPkg/TZASC: Allow specifying subregions to be disabled Bhupesh Sharma
2017-01-26 14:36 ` Leif Lindholm
2017-01-29 15:55 ` Bhupesh SHARMA [this message]
2017-01-31 9:48 ` Ryan Harkin
2017-01-31 11:44 ` Leif Lindholm
2017-01-31 12:34 ` Ryan Harkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFTCetSGHt5fGsWatoWT=2P+K5=yc+r0WMLCXQgoZjWb1oze=Q@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox