I do not get debug logs from edk2 payload even though debug payload is selected in menuconfig of coreboot.

and also updated FD_BASE, if not then getting GCD assert while adding regions in phit table.

below path should be give at L36 for custom edk2 repo?

payloads/external/edk2/workspace/tianocore/

 

Thanks & Regards
Ritul Guru
+91-9916513186

On Wed, Feb 8, 2023 at 2:06 AM Sean Rhodes <sean@starlabs.systems> wrote:

Why the edk2 changes? Just to fix this issue?

Have you seen L36 of payloads/external/edk2/Kconfig

On Tue, 7 Feb 2023 at 20:30, ritul guru <ritul.bits@gmail.com> wrote:

Loading driver 378D7B65-8DA9-4773-B6E4-A47826A833E1
InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B 51A3E1C0
Loading driver at 0x00051DD1000 EntryPoint=0x00051DD5670 PcRtc.efi
InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 51A3ED98
ProtectUefiImageCommon - 0x51A3E1C0
  - 0x0000000051DD1000 - 0x0000000000008000
SetUefiImageMemoryAttributes - 0x0000000051DD1000 - 0x0000000000001000 (0x0000000000004008)
SetUefiImageMemoryAttributes - 0x0000000051DD2000 - 0x0000000000006000 (0x0000000000020008)
SetUefiImageMemoryAttributes - 0x0000000051DD8000 - 0x0000000000001000 (0x0000000000004008)
PROGRESS CODE: V03040002 I0

ASSERT_EFI_ERROR (Status = Device Error)
ASSERT [PcRtc] /home//src/p/coreboot/payloads/external/edk2/workspace/tianocore/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c(1)

getting above assert after changed to FD_BASE to below value, 

This error is coming while booting to coreboot with edk2 payload:

UefiPayloadPkg/UefiPayloadPkg.fdf

DEFINE FD_BASE       = 0x02182000

need to change FD_BASE, as it was going outside Available memory.

any hint would be appreciated.

Thanks & Regards
Ritul Guru
+91-9916513186

On Tue, Feb 7, 2023 at 10:09 PM ritul guru <ritul.bits@gmail.com> wrote:

UefiPayloadPkg/UefiPayloadPkg.fdf

DEFINE FD_BASE       = 0x00800000

Is the above address correct in uefipaylaod?

As observing some regions are getting out of limit of FD limit,

and when setting DEFINE FD_BASE       = 0x02200000, then seeing assert in 

[gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister].

Thanks & Regards
Ritul Guru
+91-9916513186

On Tue, Feb 7, 2023 at 8:29 PM ritul guru <ritul.bits@gmail.com> wrote:

Hi,

I am building edk2 payload and getting below warning for PcdRtcIndexRegister,

and if try to boot to then observing that there is assert at:

ASSERT_EFI_ERROR (Status = Device Error)

DXE_ASSERT!: /home/amd/src///coreboot/payloads/external/tianocore/tianocore/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c (141): !EFI_ERROR (Status)

build time warning:

Active Platform          = /home//src///coreboot/payloads/external/edk2/workspace/tianocore/UefiPayloadPkg/UefiPayloadPkg.dsc
.build: : warning: The PCD was not specified by any INF module in the platform for the given architecture.
        PCD: [gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister]
        Platform: [UefiPayloadPkg.dsc]
        Arch: ['IA32']
build: : warning: The PCD was not specified by any INF module in the platform for the given architecture.
        PCD: [gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister]
        Platform: [UefiPayloadPkg.dsc]
        Arch: ['IA32']
. done!

Thanks & Regards
Ritul Guru
+91-9916513186