From: Thomas Abraham <thomas.abraham@arm.com>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Thomas Abraham <thomas.abraham@arm.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Leif Lindholm <leif.lindholm@linaro.org>
Subject: Re: [PATCH edk2-platforms v4 4/9] Platform/ARM/Sgi: add support for virtio block device
Date: Wed, 23 May 2018 09:39:12 +0530 [thread overview]
Message-ID: <CAJuA9ag-dOKQX3aBeCGWhhOhcLTzaLir5Jk7mVYcdBx8L0fJiA@mail.gmail.com> (raw)
In-Reply-To: <CAKv+Gu_NSW8ZRzt0GraOYWgG5Qj_9k6jvRkwiisoyt3G8OL5ig@mail.gmail.com>
On Mon, May 21, 2018 at 2:28 PM, Ard Biesheuvel
<ard.biesheuvel@linaro.org> wrote:
> On 21 May 2018 at 10:25, Thomas Abraham <thomas.abraham@arm.com> wrote:
>> From: Daniil Egranov <daniil.egranov@arm.com>
>>
>> Add the registration of the virtio block device.
>>
>> Contributed-under: TianoCore Contribution Agreement 1.1
>> Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
>> Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
>> ---
>> .../ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c | 18 ++++-
>> .../ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf | 1 +
>> .../ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c | 76 ++++++++++++++++++++++
>> 3 files changed, 94 insertions(+), 1 deletion(-)
>> create mode 100644 Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
>>
>> diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
>> index eb26fde..fb1e390 100644
>> --- a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
>> +++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
>> @@ -15,11 +15,27 @@
>> #include <Library/DebugLib.h>
>>
>> EFI_STATUS
>> +InitVirtioBlockIo (
>> + IN EFI_HANDLE ImageHandle
>> +);
>> +
>> +EFI_STATUS
>> EFIAPI
>> ArmSgiPkgEntryPoint (
>> IN EFI_HANDLE ImageHandle,
>> IN EFI_SYSTEM_TABLE *SystemTable
>> )
>> {
>> - return EFI_SUCCESS;
>> + EFI_STATUS Status;
>> +
>> + // Install Virtio Block IO.
>> + if (FeaturePcdGet (PcdVirtioSupported) == TRUE) {
>
> No need to compare booleans with TRUE or FALSE.
>
>> + Status = InitVirtioBlockIo (ImageHandle);
>> + if (EFI_ERROR (Status)) {
>> + DEBUG ((DEBUG_ERROR, "PlatformDxe: Failed to install Virtio Block IO\n"));
>> + return Status;
>> + }
>> + }
>> +
>> + return Status;
>> }
>> diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
>> index dbe04c5..995f80d 100644
>> --- a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
>> +++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
>> @@ -20,6 +20,7 @@
>>
>> [Sources.common]
>> PlatformDxe.c
>> + VirtioBlockIo.c
>>
>> [Packages]
>> ArmPkg/ArmPkg.dec
>> diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
>> new file mode 100644
>> index 0000000..58dfd22
>> --- /dev/null
>> +++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
>> @@ -0,0 +1,76 @@
>> +/** @file
>> +
>> + Copyright (c) 2018, ARM Ltd. All rights reserved.<BR>
>> +
>> + This program and the accompanying materials are licensed and made available
>> + under the terms and conditions of the BSD License which accompanies this
>> + distribution. The full text of the license may be found at
>> + http://opensource.org/licenses/bsd-license.php
>> +
>> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> +
>> +**/
>> +
>> +#include <Library/VirtioMmioDeviceLib.h>
>> +#include <Library/DevicePathLib.h>
>> +#include <Library/DebugLib.h>
>> +#include <Library/UefiBootServicesTableLib.h>
>> +#include <SgiPlatform.h>
>> +
>> +#pragma pack (1)
>> +typedef struct {
>> + VENDOR_DEVICE_PATH Vendor;
>> + EFI_DEVICE_PATH_PROTOCOL End;
>> +} VIRTIO_BLK_DEVICE_PATH;
>> +#pragma pack ()
>> +
>> +STATIC VIRTIO_BLK_DEVICE_PATH mVirtioBlockDevicePath =
>> +{
>> + {
>> + {
>> + HARDWARE_DEVICE_PATH,
>> + HW_VENDOR_DP,
>> + {
>> + (UINT8)( sizeof (VENDOR_DEVICE_PATH) ),
>> + (UINT8)( (sizeof (VENDOR_DEVICE_PATH) ) >> 8)
>
> No spaces after ( or before ) please
>
>> + }
>> + },
>> + EFI_CALLER_ID_GUID,
>> + },
>> + {
>> + END_DEVICE_PATH_TYPE,
>> + END_ENTIRE_DEVICE_PATH_SUBTYPE,
>> + {
>> + sizeof (EFI_DEVICE_PATH_PROTOCOL),
>> + 0
>> + }
>> + }
>> +};
>> +
>> +/**
>> + * Entrypoint for 'VirtioBlockIo' driver
>> + */
>> +EFI_STATUS
>> +InitVirtioBlockIo (
>> + IN EFI_HANDLE ImageHandle
>> + )
>> +{
>> + EFI_STATUS Status = 0;
>> +
>> + Status = gBS->InstallProtocolInterface (&ImageHandle,
>> + &gEfiDevicePathProtocolGuid, EFI_NATIVE_INTERFACE,
>> + &mVirtioBlockDevicePath);
>> +
>
> Please use correct indentation.
>
>> + if (EFI_ERROR (Status)) {
>> + return Status;
>> + }
>> +
>> + // Declare the Virtio BlockIo device
>> + Status = VirtioMmioInstallDevice (SGI_EXP_SYSPH_VIRTIO_BLOCK_BASE, ImageHandle);
>> + if (EFI_ERROR (Status)) {
>> + DEBUG ((DEBUG_ERROR, "PlatformDxe: Failed to install Virtio block device\n"));
>> + }
>> +
>
> Please handle this error correctly. If the call to
> VirtioMmioInstallDevice() fails, you will exit this function and hence
> the DXE entry point with an error, which will result in the driver to
> be unloaded. However, you just installed gEfiDevicePathProtocolGuid
> with references to the driver's code, and attempts to invoke those
> will result in a crash after this.
Okay, thanks for pointing this out. This will be fixed in the next version.
Thanks,
Thomas.
>
>> + return Status;
>> +}
>> --
>> 2.7.4
>>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2018-05-23 4:09 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-21 8:25 [PATCH edk2-platforms v4 0/9] Platform/ARM/Sgi: Add Arm's SGI platform support Thomas Abraham
2018-05-21 8:25 ` [PATCH edk2-platforms v4 1/9] Platform/ARM/Sgi: Add Platform library implementation Thomas Abraham
2018-05-21 8:50 ` Ard Biesheuvel
2018-05-21 8:25 ` [PATCH edk2-platforms v4 2/9] Platform/ARM/Sgi: add NOR flash platform " Thomas Abraham
2018-05-21 8:53 ` Ard Biesheuvel
2018-05-23 4:07 ` Thomas Abraham
2018-05-21 8:25 ` [PATCH edk2-platforms v4 3/9] Platform/ARM/Sgi: add initial platform dxe driver implementation Thomas Abraham
2018-05-21 8:55 ` Ard Biesheuvel
2018-05-23 4:08 ` Thomas Abraham
2018-05-21 8:25 ` [PATCH edk2-platforms v4 4/9] Platform/ARM/Sgi: add support for virtio block device Thomas Abraham
2018-05-21 8:58 ` Ard Biesheuvel
2018-05-23 4:09 ` Thomas Abraham [this message]
2018-05-21 8:25 ` [PATCH edk2-platforms v4 5/9] Platform/ARM/Sgi: add the initial set of acpi tables Thomas Abraham
2018-05-21 8:48 ` Alexei Fedorov
2018-05-23 4:20 ` Thomas Abraham
2018-05-21 9:06 ` Ard Biesheuvel
2018-05-21 10:09 ` Alexei Fedorov
2018-05-23 4:23 ` Thomas Abraham
2018-05-21 8:25 ` [PATCH edk2-platforms v4 6/9] Platform/ARM/Sgi: add initial support for ARM SGI platform Thomas Abraham
2018-05-21 9:08 ` Ard Biesheuvel
2018-05-21 8:25 ` [PATCH edk2-platforms v4 7/9] Platform/ARM/Sgi: add support for smsc91x ethernet controller Thomas Abraham
2018-05-21 9:09 ` Ard Biesheuvel
2018-05-23 4:11 ` Thomas Abraham
2018-05-21 8:25 ` [PATCH edk2-platforms v4 8/9] Platform/ARM/Sgi: implement PciHostBridgeLib support Thomas Abraham
2018-05-21 9:16 ` Ard Biesheuvel
2018-05-23 4:14 ` Thomas Abraham
2018-05-21 8:25 ` [PATCH edk2-platforms v4 9/9] Platform/ARM/Sgi: Add Ssdt, Iort and Mcfg tables Thomas Abraham
2018-05-21 9:29 ` Ard Biesheuvel
2018-05-23 4:19 ` Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJuA9ag-dOKQX3aBeCGWhhOhcLTzaLir5Jk7mVYcdBx8L0fJiA@mail.gmail.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox