From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: Pete Batard <pete@akeo.ie>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Leif Lindholm <leif.lindholm@linaro.org>
Subject: Re: [PATCH v3 edk2-platforms 03/23] Platform/Raspberry/Pi3: Add ACPI tables
Date: Mon, 28 Jan 2019 14:24:12 +0100 [thread overview]
Message-ID: <CAKv+Gu--YKjvjB_SU9bZ3ncEppxWGq1N2VDbKiDazBiwqAS8EA@mail.gmail.com> (raw)
In-Reply-To: <20190128124445.9868-4-pete@akeo.ie>
Hi Pete,
A couple of general remarks on these tables.
- AFAICT (but is is difficult to tell from the binary dumps), these
are based on ACPI 5.0, which predates the introduction of ARM support
into the spec. That essentially makes them Windows-only, and not spec
based, which is unfortunate. However, since this SoC does not have an
interrupt controller permitted by ACPI, that actually does not matter
a lot in practice.
- _CID fields should be properly formatted ACPI or PNP handles, you
can't put arbitrary strings in there (like BCMAUXSPI or VC4)
On Mon, 28 Jan 2019 at 13:45, Pete Batard <pete@akeo.ie> wrote:
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Pete Batard <pete@akeo.ie>
> ---
> Platform/Raspberry/Pi3/AcpiTables/AcpiTables.h | 82 ++++
> Platform/Raspberry/Pi3/AcpiTables/AcpiTables.inf | 51 ++
> Platform/Raspberry/Pi3/AcpiTables/Csrt.aslc | 332 +++++++++++++
> Platform/Raspberry/Pi3/AcpiTables/Dbg2.aslc | 34 ++
> Platform/Raspberry/Pi3/AcpiTables/Dsdt.asl | 511 ++++++++++++++++++++
> Platform/Raspberry/Pi3/AcpiTables/Fadt.aslc | 52 ++
> Platform/Raspberry/Pi3/AcpiTables/Gtdt.aslc | 33 ++
> Platform/Raspberry/Pi3/AcpiTables/Madt.aslc | 62 +++
> Platform/Raspberry/Pi3/AcpiTables/Pep.asl | 95 ++++
> Platform/Raspberry/Pi3/AcpiTables/Pep.c | 84 ++++
> Platform/Raspberry/Pi3/AcpiTables/Pep.h | 126 +++++
> Platform/Raspberry/Pi3/AcpiTables/Rhpx.asl | 201 ++++++++
> Platform/Raspberry/Pi3/AcpiTables/Sdhc.asl | 105 ++++
> Platform/Raspberry/Pi3/AcpiTables/Spcr.asl | 53 ++
> Platform/Raspberry/Pi3/AcpiTables/Uart.asl | 158 ++++++
> 15 files changed, 1979 insertions(+)
>
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/AcpiTables.h b/Platform/Raspberry/Pi3/AcpiTables/AcpiTables.h
> new file mode 100644
> index 000000000000..be28b6decefd
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/AcpiTables.h
> @@ -0,0 +1,82 @@
> +/** @file
> + *
> + * RPi3 defines for constructing ACPI tables
> + *
> + * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +#ifndef __ACPITABLES_H__
> +#define __ACPITABLES_H__
> +
> +#include <IndustryStandard/Acpi50.h>
> +
> +#define EFI_ACPI_OEM_ID {'M','C','R','S','F','T'} // OEMID 6 bytes long
> +#define EFI_ACPI_OEM_TABLE_ID SIGNATURE_64 ('R','P','I','3','E','D','K','2') // OEM table id 8 bytes long
> +#define EFI_ACPI_OEM_REVISION 0x02000820
> +#define EFI_ACPI_CREATOR_ID SIGNATURE_32 ('R','P','I','3')
> +#define EFI_ACPI_CREATOR_REVISION 0x00000097
> +
> +#define EFI_ACPI_VENDOR_ID SIGNATURE_32 ('M','S','F','T')
> +#define EFI_ACPI_CSRT_REVISION 0x00000005
> +#define EFI_ACPI_CSRT_DEVICE_ID_DMA 0x00000009 // Fixed id
> +#define EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP 0x0 // Count up from 0
> +
> +#define RPI3_DMA_CHANNEL_COUNT 10 // All 10 DMA channels are listed, including the reserved ones
> +#define RPI3_DMA_USED_CHANNEL_COUNT 5 // Use 5 DMA channels
> +
> +#define EFI_ACPI_5_0_CSRT_REVISION 0x00000000
> +
> +typedef enum
> +{
> + EFI_ACPI_CSRT_RESOURCE_TYPE_RESERVED, // 0
> + EFI_ACPI_CSRT_RESOURCE_TYPE_INTERRUPT, // 1
> + EFI_ACPI_CSRT_RESOURCE_TYPE_TIMER, // 2
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA, // 3
> + EFI_ACPI_CSRT_RESOURCE_TYPE_CACHE, // 4
> +}
> +CSRT_RESOURCE_TYPE;
> +
> +typedef enum
> +{
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL, // 0
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CONTROLLER // 1
> +}
> +CSRT_DMA_SUBTYPE;
> +
> +//------------------------------------------------------------------------
> +// CSRT Resource Group header 24 bytes long
> +//------------------------------------------------------------------------
> +typedef struct
> +{
> + UINT32 Length; // Length
> + UINT32 VendorID; // 4 bytes
> + UINT32 SubVendorId; // 4 bytes
> + UINT16 DeviceId; // 2 bytes
> + UINT16 SubdeviceId; // 2 bytes
> + UINT16 Revision; // 2 bytes
> + UINT16 Reserved; // 2 bytes
> + UINT32 SharedInfoLength; // 4 bytes
> +} EFI_ACPI_5_0_CSRT_RESOURCE_GROUP_HEADER;
> +
> +//------------------------------------------------------------------------
> +// CSRT Resource Descriptor 12 bytes total
> +//------------------------------------------------------------------------
> +typedef struct
> +{
> + UINT32 Length; // 4 bytes
> + UINT16 ResourceType; // 2 bytes
> + UINT16 ResourceSubType; // 2 bytes
> + UINT32 UID; // 4 bytes
> +} EFI_ACPI_5_0_CSRT_RESOURCE_DESCRIPTOR_HEADER;
> +
> +#endif // __ACPITABLES_H__
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/AcpiTables.inf b/Platform/Raspberry/Pi3/AcpiTables/AcpiTables.inf
> new file mode 100644
> index 000000000000..53095f46fdd5
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/AcpiTables.inf
> @@ -0,0 +1,51 @@
> +#/** @file
> +#
> +# ACPI table data and ASL sources required to boot the platform.
> +#
> +# Copyright (c) 2017, Andrey Warkentin <andrey.warkentin@gmail.com>
> +# Copyright (c) Microsoft Corporation. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001A
> + BASE_NAME = AcpiTables
> + FILE_GUID = 7E374E25-8E01-4FEE-87F2-390C23C606CD
> + MODULE_TYPE = USER_DEFINED
> + VERSION_STRING = 1.0
> +
> +#
> +# The following information is for reference only and not required by the build tools.
> +#
> +# VALID_ARCHITECTURES = AARCH64
> +#
> +
> +[Sources]
> + AcpiTables.h
> + Madt.aslc
> + Fadt.aslc
> + Dbg2.aslc
> + Gtdt.aslc
> + Dsdt.asl
> + Csrt.aslc
> + Spcr.asl
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + EmbeddedPkg/EmbeddedPkg.dec
> +
> +[FixedPcd]
> + gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress
> +
> +[BuildOptions]
> + # The default '-mcmodel=small' used with DEBUG produces a GenFw error when compiling CSRT.acpi:
> + # "AARCH64 small code model requires identical ELF and PE/COFF section offsets modulo 4 KB."
> + GCC:DEBUG_*_AARCH64_CC_FLAGS = -mcmodel=tiny
Please drop this, it should no longer be needed
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Csrt.aslc b/Platform/Raspberry/Pi3/AcpiTables/Csrt.aslc
> new file mode 100644
> index 000000000000..1b593bd29c10
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Csrt.aslc
> @@ -0,0 +1,332 @@
> +/** @file
> + *
> + * Core System Resource Table (CSRT)
> + *
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +#include "AcpiTables.h"
> +
> +#define DMA_MAX_REQ_LINES 32
> +
> +#pragma pack (push, 1)
> +
> +//------------------------------------------------------------------------
> +// DMA Controller Vendor Data for RPi3
> +//------------------------------------------------------------------------
> +typedef struct
> +{
> + UINT32 Length;
> + UINT32 Type;
> + UINT64 ChannelsBaseAddress;
> + UINT32 ChannelsBaseSize;
> + UINT64 ControllerBaseAddress;
> + UINT32 ControllerBaseSize;
> + UINT32 ChannelCount;
> + UINT32 ControllerInterrupt;
> + UINT32 MinimumRequestLine;
> + UINT32 MaximumRequestLine;
> + BOOLEAN CacheCoherent;
> +} DMA_CONTROLLER_VENDOR_DATA;
> +
> +//------------------------------------------------------------------------
> +// DMA Controller on RPi3
> +//------------------------------------------------------------------------
> +typedef struct
> +{
> + EFI_ACPI_5_0_CSRT_RESOURCE_DESCRIPTOR_HEADER DmaControllerHeader;
> + DMA_CONTROLLER_VENDOR_DATA ControllerVendorData;
> +} RD_DMA_CONTROLLER;
> +
> +//------------------------------------------------------------------------
> +// DMA Channel Vendor Data for RPi3
> +//------------------------------------------------------------------------
> +typedef struct
> +{
> + UINT32 ChannelNumber;
> + UINT32 ChannelInterrupt;
> + UINT16 IsReservedChannel;
> + UINT16 NoSrcNoDestAddrIncr;
> +} DMA_CHANNEL_VENDOR_DATA;
> +
> +//------------------------------------------------------------------------
> +// DMA Channel on RPi3
> +//------------------------------------------------------------------------
> +typedef struct
> +{
> + EFI_ACPI_5_0_CSRT_RESOURCE_DESCRIPTOR_HEADER DmaChannelHeader;
> + DMA_CHANNEL_VENDOR_DATA ChannelVendorData;
> +} RD_DMA_CHANNEL;
> +
> +//------------------------------------------------------------------------
> +// DMA Resource Group on RPi3
> +//------------------------------------------------------------------------
> +
> +typedef struct
> +{
> + EFI_ACPI_5_0_CSRT_RESOURCE_GROUP_HEADER ResGroupHeader;
> + RD_DMA_CONTROLLER DmaController;
> + RD_DMA_CHANNEL DmaChannels[RPI3_DMA_CHANNEL_COUNT];
> +} RG_DMA;
> +
> +//----------------------------------------------------------------------------
> +// CSRT table structure for RPi3 platform - current revision only includes DMA
> +//----------------------------------------------------------------------------
> +typedef struct
> +{
> +// Standard ACPI Header
> + EFI_ACPI_DESCRIPTION_HEADER CsrtHeader;
> +
> +// DMA Resource Group
> + RG_DMA DmaResourceGroup;
> +
> +} EFI_ACPI_5_0_CSRT_TABLE;
> +
> +EFI_ACPI_5_0_CSRT_TABLE Csrt =
> +{
> + //------------------------------------------------------------------------
> + // ACPI Table Header
> + //------------------------------------------------------------------------
> + {
> + EFI_ACPI_5_0_CORE_SYSTEM_RESOURCE_TABLE_SIGNATURE, // Signature "CSRT"
> + sizeof (EFI_ACPI_DESCRIPTION_HEADER) + sizeof (RG_DMA), // Length
> + EFI_ACPI_5_0_CSRT_REVISION, // Revision
> + 0x00, // Checksum calculated at runtime.
> + EFI_ACPI_OEM_ID, // OEMID is a 6 bytes long field "BC2836"
> + EFI_ACPI_OEM_TABLE_ID, // OEM table identification(8 bytes long) "RPI3EDK2"
> + EFI_ACPI_OEM_REVISION, // OEM revision number.
> + EFI_ACPI_CREATOR_ID, // ASL compiler vendor ID.
> + EFI_ACPI_CREATOR_REVISION // ASL compiler revision number.
> + },
> +
> + //------------------------------------------------------------------------
> + // DMA Resource Group
> + //------------------------------------------------------------------------
> + {
> +
> + //------------------------------------------------------------------------
> + // DMA Resource Group Header
> + //------------------------------------------------------------------------
> + {
> + sizeof (RG_DMA), // Resource Group Length
> + EFI_ACPI_VENDOR_ID, // VendorId
> + 0, // SubvendorId
> + EFI_ACPI_CSRT_DEVICE_ID_DMA, // DeviceId 9
> + 0, // SubdeviceId
> + 0, // Revision
> + 0, // Reserved
> + 0 // SharedInfoLength
> + },
> +
> + //-------------------------------------------------------------------------------
> + // Resource Descriptor - DMA Controller
> + //-------------------------------------------------------------------------------
> + {
> + {
> + sizeof (RD_DMA_CONTROLLER), // Length of this Resource Descriptor
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA, // Type for this resource 3=DMA
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CONTROLLER, // Subtype for this resource 1=DMA Controller
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 0, // ResourceId - 1st DMA controller
> + },
> + {
> + sizeof (DMA_CONTROLLER_VENDOR_DATA), // Controller vendor data here
> + 1,
> + 0x3F007000, // Base address for channels
> + RPI3_DMA_CHANNEL_COUNT * 0x100, // Base size = Number of channels x 0x100 size for each channel
> + 0x3F007FE0, // Base address for controller
> + 8, // Base size = two registers
> + RPI3_DMA_USED_CHANNEL_COUNT,
> + 0, // cannot use controller interrupt
> + 0, // Minimum Request Line
> + DMA_MAX_REQ_LINES - 1, // Maximum Request Line
> + FALSE,
> + },
> + },
> +
> + //------------------------------------------------------------------------
> + // Resource Descriptor(s) - DMA Channels 0 to n-1
> + //------------------------------------------------------------------------
> + {
> +
> + // Channel 0
> + {
> + {
> + sizeof (RD_DMA_CHANNEL), // Length of this Resource Descriptor
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA, // Type for this resource 3=DMA
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL, // Subtype for this resource 0=DMA Channel
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 1, // ResourceId
> + },
> + {
> + 0, // Channel vendor data here
> + 0x30, // 16+32 dma_int[0]
> + 0,
> + 0
> + },
> + },
> +
> + // Channel 1 reserved
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 2, // ResourceId
> + },
> + {
> + 1, // Channel vendor data here
> + 0x31, // 17+32 dma_int[1]
> + 1,
> + 0
> + },
> + },
> +
> + // Channel 2 - VC4 use only
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 3, // ResourceId
> + },
> + {
> + 2, // Channel vendor data here
> + 0x32, // 18+32 dma_int[2]
> + 1,
> + 0
> + },
> + },
> +
> + // Channel 3 - VC4 use only
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 4,
> + },
> + {
> + 3, // Channel vendor data here
> + 0x33, // 19+32 dma_int[3]
> + 1,
> + 0
> + },
> + },
> +
> + // channel 4
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 5,
> + },
> + {
> + 4, // Channel vendor data here
> + 0x34, // 20+32 dma_int[4]
> + 0,
> + 1 // SD host controller candidate
> + },
> + },
> +
> + // Channel 5
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 6,
> + },
> + {
> + 5, // Channel vendor data here
> + 0x35, // 21+32 dma_int[5]
> + 0,
> + 0
> + },
> + },
> +
> + // Channel 6 is reserved
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 7,
> + },
> + {
> + 6, // Channel vendor data here
> + 0x36, // 22+32 dma_int[6]
> + 1,
> + 0
> + },
> + },
> +
> + // Channel 7 is reserved
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 8,
> + },
> + {
> + 7, // Channel vendor data here
> + 0x37, // 23+32 dma_int[7]
> + 1,
> + 0
> + },
> + },
> +
> + // Channel 8
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 9,
> + },
> + {
> + 8, // Channel vendor data here
> + 0x38, // 24+32 dma_int[8]
> + 0,
> + 0
> + },
> + },
> +
> + // Channel 9
> + {
> + {
> + sizeof (RD_DMA_CHANNEL),
> + EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
> + EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
> + EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP + 10,
> + },
> + {
> + 9, // channel vendor data here
> + 0x39, // 25+32 dma_int[9]
> + 0,
> + 0
> + },
> + }
> +
> + } // End DMA Channels 0 to 14
> +
> + } // End DMA Resource group
> +
> +};
> +
> +#pragma pack(pop)
> +
> +//
> +// Reference the table being generated to prevent the optimizer from removing the
> +// data structure from the executable
> +//
> +VOID* CONST ReferenceAcpiTable = &Csrt;
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Dbg2.aslc b/Platform/Raspberry/Pi3/AcpiTables/Dbg2.aslc
> new file mode 100644
> index 000000000000..dc2d2dfb2881
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Dbg2.aslc
> @@ -0,0 +1,34 @@
> +/** @file
> + *
> + * Debug Port Table (DBG2)
> + *
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +UINT8 Dbg2[92] = {
> + 0x44, 0x42, 0x47, 0x32, 0x5C, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x4D, 0x53, 0x46, 0x54, 0x20, 0x20, 0x45, 0x44, 0x4B, 0x32,
> + 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53,
> + 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x2C, 0x00, 0x00, 0x00,
> + 0x01, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x01, 0x0A, 0x00,
> + 0x26, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x80, 0x10, 0x00,
> + 0x00, 0x00, 0x16, 0x00, 0x22, 0x00, 0x00, 0x20, 0x00, 0x10,
> + 0x00, 0x50, 0x21, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00,
> + 0x00, 0x00, '\\', '_', 'S', 'B', '.', 'U', 'R', 'T',
> + 'M', 0x00,
> +};
> +
> +//
> +// Reference the table being generated to prevent the optimizer from removing the
> +// data structure from the executable
> +//
> +VOID* CONST ReferenceAcpiTable = &Dbg2;
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Dsdt.asl b/Platform/Raspberry/Pi3/AcpiTables/Dsdt.asl
> new file mode 100644
> index 000000000000..be2c4db7ccc9
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Dsdt.asl
> @@ -0,0 +1,511 @@
> +/** @file
> + *
> + * Differentiated System Definition Table (DSDT)
> + *
> + * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +#define BCM_ALT0 0x4
> +#define BCM_ALT1 0x5
> +#define BCM_ALT2 0x6
> +#define BCM_ALT3 0x7
> +#define BCM_ALT4 0x3
> +#define BCM_ALT5 0x2
> +
> +DefinitionBlock ("Dsdt.aml", "DSDT", 5, "MSFT", "EDK2", 2)
> +{
> + Scope (\_SB_)
> + {
> + include ("Sdhc.asl")
> + include ("Pep.asl")
> +
> + Device (CPU0)
> + {
> + Name (_HID, "ACPI0007")
> + Name (_UID, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + }
> +
> + Device (CPU1)
> + {
> + Name (_HID, "ACPI0007")
> + Name (_UID, 0x1)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + }
> +
> + Device (CPU2)
> + {
> + Name (_HID, "ACPI0007")
> + Name (_UID, 0x2)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + }
> +
> + Device (CPU3)
> + {
> + Name (_HID, "ACPI0007")
> + Name (_UID, 0x3)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + }
> +
> + // DWC OTG Controller
> + Device (USB0)
> + {
> + Name (_HID, "BCM2848")
> + Name (_CID, Package() { "DWC_OTG", "DWC2_OTG"})
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED(ReadWrite, 0x3F980000, 0x10000,)
> + Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x29 }
> + })
> + Return(RBUF)
> + }
> + }
> +
> + // Video Core 4 GPU
> + Device (GPU0)
> + {
> + Name (_HID, "BCM2850")
> + Name (_CID, "VC4")
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return(0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + // Memory and interrupt for the GPU
> + MEMORY32FIXED(ReadWrite, 0x3FC00000, 0x1000,)
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x2A }
> +
> + // HVS - Hardware Video Scalar
> + MEMORY32FIXED (ReadWrite, 0x3F400000, 0x6000,)
> + // The HVS interrupt is reserved by the VPU
> + // Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x41 }
> +
> + // PixelValve0 - DSI0 or DPI
> + // MEMORY32FIXED (ReadWrite, 0x3F206000, 0x100,)
> + // Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x4D }
> +
> + // PixelValve1 - DS1 or SMI
> + // MEMORY32FIXED (ReadWrite, 0x73F207000, 0x100,)
> + // Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x4E }
> +
> + // PixelValve2 - HDMI output - connected to HVS display FIFO 1
> + MEMORY32FIXED (ReadWrite, 0x3F807000, 0x100,)
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x4A }
> +
> + // HDMI registers
> + MEMORY32FIXED (ReadWrite, 0x3F902000, 0x600,) // HDMI registers
> + MEMORY32FIXED (ReadWrite, 0x3F808000, 0x100,) // HD registers
> + // hdmi_int[0]
> + // Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x48 }
> + // hdmi_int[1]
> + // Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x49 }
> +
> + // HDMI DDC connection
> + I2CSerialBus (0x50,, 100000,, "\\_SB.I2C2",,,,) // EDID
> + I2CSerialBus (0x30,, 100000,, "\\_SB.I2C2",,,,) // E-DDC Segment Pointer
> + })
> + Return(RBUF)
> + }
> +
> + // GPU Power Management Component Data
> + // Reference : https://github.com/Microsoft/graphics-driver-samples/wiki/Install-Driver-in-a-Windows-VM
> + Method (PMCD, 0, Serialized)
> + {
> + Name (RBUF, Package ()
> + {
> + 1, // Version
> + 1, // Number of graphics power components
> + Package () // Power components package
> + {
> + Package () // GPU component package
> + {
> + 0, // Component Index
> + 0, // DXGK_POWER_COMPONENT_MAPPING.ComponentType (0 = DXGK_POWER_COMPONENT_ENGINE)
> + 0, // DXGK_POWER_COMPONENT_MAPPING.NodeIndex
> +
> + Buffer () // DXGK_POWER_RUNTIME_COMPONENT.ComponentGuid
> + { // 9B2D1E26-1575-4747-8FC0-B9EB4BAA2D2B
> + 0x26, 0x1E, 0x2D, 0x9B, 0x75, 0x15, 0x47, 0x47,
> + 0x8f, 0xc0, 0xb9, 0xeb, 0x4b, 0xaa, 0x2d, 0x2b
> + },
> +
> + "VC4_Engine_00",// DXGK_POWER_RUNTIME_COMPONENT.ComponentName
> + 2, // DXGK_POWER_RUNTIME_COMPONENT.StateCount
> +
> + Package () // DXGK_POWER_RUNTIME_COMPONENT.States[] package
> + {
> + Package () // F0
> + {
> + 0, // DXGK_POWER_RUNTIME_STATE.TransitionLatency
> + 0, // DXGK_POWER_RUNTIME_STATE.ResidencyRequirement
> + 1210000, // DXGK_POWER_RUNTIME_STATE.NominalPower (microwatt)
> + },
> +
> + Package () // F1 - Placeholder
> + {
> + 10000, // DXGK_POWER_RUNTIME_STATE.TransitionLatency
> + 10000, // DXGK_POWER_RUNTIME_STATE.ResidencyRequirement
> + 4, // DXGK_POWER_RUNTIME_STATE.NominalPower
> + },
> + }
> + }
> + }
> + })
> + Return (RBUF)
> + }
> + }
> +
> + // PiQ Mailbox Driver
> + Device (RPIQ)
> + {
> + Name (_HID, "BCM2849")
> + Name (_CID, "RPIQ")
> + Name (_UID, 0)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + Memory32Fixed (ReadWrite, 0x3F00B880, 0x00000024,)
> + Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x61 }
> + })
> + Return (RBUF)
> + }
> + }
> +
> + // VCHIQ Driver
> + Device (VCIQ)
> + {
> + Name (_HID, "BCM2835")
> + Name (_CID, "VCIQ")
> + Name (_UID, 0)
> + Name (_CCA, 0x0)
> + Name (_DEP, Package() { \_SB.RPIQ })
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + Memory32Fixed (ReadWrite, 0x3F00B840, 0x00000010,)
> + Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x62 }
> + })
> + Return (RBUF)
> + }
> + }
> +
> + // VC Shared Memory Driver
> + Device (VCSM)
> + {
> + Name (_HID, "BCM2856")
> + Name (_CID, "VCSM")
> + Name (_UID, 0)
> + Name (_CCA, 0x0)
> + Name (_DEP, Package() { \_SB.VCIQ })
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + }
> +
> + // Description: GPIO
> + Device (GPI0)
> + {
> + Name (_HID, "BCM2845")
> + Name (_CID, "BCMGPIO")
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return(0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED (ReadWrite, 0x3F200000, 0xB4, )
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Shared) { 0x51 }
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Shared) { 0x53 }
> + })
> + Return (RBUF)
> + }
> + }
> +
> + // Description: I2C
> + Device (I2C1)
> + {
> + Name (_HID, "BCM2841")
> + Name (_CID, "BCMI2C")
> + Name (_UID, 0x1)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return(0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + Memory32Fixed(ReadWrite, 0x3F804000, 0x20)
> + Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) {0x55}
> +
> + //
> + // MsftFunctionConfig is encoded as the VendorLong.
> + //
> + // MsftFunctionConfig (Exclusive, PullUp, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer,) {2, 3}
> + //
> + VendorLong () // Length = 0x31
> + {
> + /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
> + /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
> + /* 0010 */ 0x2F, 0x8D, 0x1D, 0x00, 0x01, 0x10, 0x00, 0x01, // /.......
> + /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x16, 0x00, 0x20, // ........
> + /* 0020 */ 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x00, 0x5C, // ........
> + /* 0028 */ 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, // _SB.GPI0
> + /* 0030 */ 0x00 // .
> + }
> + })
> + Return (RBUF)
> + }
> + }
> +
> + // I2C2 is the HDMI DDC connection
> + Device (I2C2)
> + {
> + Name (_HID, "BCM2841")
> + Name (_CID, "BCMI2C")
> + Name (_UID, 0x2)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate()
> + {
> + Memory32Fixed (ReadWrite, 0x3F805000, 0x20)
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Shared) {0x55}
> + })
> + Return (RBUF)
> + }
> + }
> +
> + // SPI
> + Device (SPI0)
> + {
> + Name (_HID, "BCM2838")
> + Name (_CID, "BCMSPI0")
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED (ReadWrite, 0x3F204000, 0x20,)
> + Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) {0x56}
> +
> + //
> + // MsftFunctionConfig is encoded as the VendorLong.
> + //
> + // MsftFunctionConfig (Exclusive, PullDown, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer, ) {9, 10, 11} // MISO, MOSI, SCLK
> + VendorLong () // Length = 0x33
> + {
> + /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
> + /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
> + /* 0010 */ 0x2F, 0x8D, 0x1F, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
> + /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x18, 0x00, 0x22, // ......."
> + /* 0020 */ 0x00, 0x00, 0x00, 0x09, 0x00, 0x0A, 0x00, 0x0B, // ........
> + /* 0028 */ 0x00, 0x5C, 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, // .\_SB.GP
> + /* 0030 */ 0x49, 0x30, 0x00 // I0.
> + }
> +
> + //
> + // MsftFunctionConfig is encoded as the VendorLong.
> + //
> + // MsftFunctionConfig (Exclusive, PullUp, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer, ) {8} // CE0
> + VendorLong () // Length = 0x2F
> + {
> + /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
> + /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
> + /* 0010 */ 0x2F, 0x8D, 0x1B, 0x00, 0x01, 0x10, 0x00, 0x01, // /.......
> + /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x1E, // ........
> + /* 0020 */ 0x00, 0x00, 0x00, 0x08, 0x00, 0x5C, 0x5F, 0x53, // .....\_S
> + /* 0028 */ 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, 0x00 // B.GPI0.
> + }
> +
> + //
> + // MsftFunctionConfig is encoded as the VendorLong.
> + //
> + // MsftFunctionConfig (Exclusive, PullUp, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer, ) {7} // CE1
> + VendorLong () // Length = 0x2F
> + {
> + /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
> + /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
> + /* 0010 */ 0x2F, 0x8D, 0x1B, 0x00, 0x01, 0x10, 0x00, 0x01, // /.......
> + /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x1E, // ........
> + /* 0020 */ 0x00, 0x00, 0x00, 0x07, 0x00, 0x5C, 0x5F, 0x53, // .....\_S
> + /* 0028 */ 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, 0x00 // B.GPI0.
> + }
> + })
> + Return (RBUF)
> + }
> + }
> +
> + Device (SPI1)
> + {
> + Name (_HID, "BCM2839")
> + Name (_CID, "BCMAUXSPI")
> + Name (_UID, 0x1)
> + Name (_CCA, 0x0)
> + Name (_DEP, Package() { \_SB.RPIQ })
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED (ReadWrite, 0x3F215080, 0x40,)
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Shared,) {0x3D}
> +
> + //
> + // MsftFunctionConfig is encoded as the VendorLong.
> + //
> + // MsftFunctionConfig(Exclusive, PullDown, BCM_ALT4, "\\_SB.GPI0", 0, ResourceConsumer, ) {19, 20, 21} // MISO, MOSI, SCLK
> + VendorLong () // Length = 0x33
> + {
> + /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
> + /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
> + /* 0010 */ 0x2F, 0x8D, 0x1F, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
> + /* 0018 */ 0x03, 0x00, 0x12, 0x00, 0x00, 0x18, 0x00, 0x22, // ......."
> + /* 0020 */ 0x00, 0x00, 0x00, 0x13, 0x00, 0x14, 0x00, 0x15, // ........
> + /* 0028 */ 0x00, 0x5C, 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, // .\_SB.GP
> + /* 0030 */ 0x49, 0x30, 0x00 // I0.
> + }
> +
> + //
> + // MsftFunctionConfig is encoded as the VendorLong.
> + //
> + // MsftFunctionConfig(Exclusive, PullDown, BCM_ALT4, "\\_SB.GPI0", 0, ResourceConsumer, ) {16} // CE2
> + VendorLong () // Length = 0x2F
> + {
> + /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
> + /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
> + /* 0010 */ 0x2F, 0x8D, 0x1B, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
> + /* 0018 */ 0x03, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x1E, // ........
> + /* 0020 */ 0x00, 0x00, 0x00, 0x10, 0x00, 0x5C, 0x5F, 0x53, // .....\_S
> + /* 0028 */ 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, 0x00 // B.GPI0.
> + }
> + })
> + Return (RBUF)
> + }
> + }
> +
> + // SPI2 has no pins on GPIO header
> + // Device (SPI2)
> + // {
> + // Name (_HID, "BCM2839")
> + // Name (_CID, "BCMAUXSPI")
> + // Name (_UID, 0x2)
> + // Name (_CCA, 0x0)
> + // Name (_DEP, Package() { \_SB.RPIQ })
> + // Method (_STA)
> + // {
> + // Return (0xf) // Disabled
> + // }
> + // Method (_CRS, 0x0, Serialized)
> + // {
> + // Name (RBUF, ResourceTemplate ()
> + // {
> + // MEMORY32FIXED (ReadWrite, 0x3F2150C0, 0x40,)
> + // Interrupt (ResourceConsumer, Level, ActiveHigh, Shared,) {0x3D}
> + // })
> + // Return (RBUF)
> + // }
> + // }
> +
> + // PWM Driver
> + Device (PWM0)
> + {
> + Name (_HID, "BCM2844")
> + Name (_CID, "BCM2844")
> + Name (_UID, 0)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + // DMA channel 11 control
> + Memory32Fixed (ReadWrite, 0x3F007B00, 0x00000100,)
> + // PWM control
> + Memory32Fixed (ReadWrite, 0x3F20C000, 0x00000028,)
> + // PWM control bus
> + Memory32Fixed (ReadWrite, 0x7E20C000, 0x00000028,)
> + // PWM control uncached
> + Memory32Fixed (ReadWrite, 0xFF20C000, 0x00000028,)
> + // PWM clock control
> + Memory32Fixed (ReadWrite, 0x3F1010A0, 0x00000008,)
> + // Interrupt DMA channel 11
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x3B }
> + // DMA channel 11, DREQ 5 for PWM
> + FixedDMA (5, 11, Width32Bit, )
> + })
> + Return (RBUF)
> + }
> + }
> +
> + include ("Uart.asl")
> + include ("Rhpx.asl")
> + }
> +}
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Fadt.aslc b/Platform/Raspberry/Pi3/AcpiTables/Fadt.aslc
> new file mode 100644
> index 000000000000..eb1873993c7f
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Fadt.aslc
> @@ -0,0 +1,52 @@
> +/** @file
> + *
> + * Fixed ACPI Description Table (FADT)
> + *
> + * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +UINT8 Fadt[268] = {
> + 0x46, 0x41, 0x43, 0x50, 0x0C, 0x01, 0x00, 0x00, 0x05, 0x00, /* 0 */
> + 0x42, 0x43, 0x32, 0x38, 0x33, 0x36, 0x45, 0x44, 0x4B, 0x32, /* 10 */
> + 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53, /* 20 */
> + 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, /* 40 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 50 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
> + 0x00, 0x04, 0x00, 0x00, 0x00, 0xE3, 0x00, 0x00, 0x00, 0x00, /* 90 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, /* 100 */
> + 0x00, 0x00, 0x21, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* 110 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, /* 120 */
> + 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 130 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 140 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 150 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 160 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 170 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 180 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 190 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 200 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 210 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 220 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 230 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 240 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 250 */
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 /* 268 */
> +};
> +
> +//
> +// Reference the table being generated to prevent the optimizer from removing the
> +// data structure from the executable
> +//
> +VOID* CONST ReferenceAcpiTable = &Fadt;
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Gtdt.aslc b/Platform/Raspberry/Pi3/AcpiTables/Gtdt.aslc
> new file mode 100644
> index 000000000000..611eed2881e0
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Gtdt.aslc
> @@ -0,0 +1,33 @@
> +/** @file
> + *
> + * Generic Timer Description Table (GTDT)
> + * Automatically generated by AutoAcpi
> + *
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +UINT8 Gtdt[80] = {
> + 0x47, 0x54, 0x44, 0x54, 0x50, 0x00, 0x00, 0x00, 0x01, 0x00,
> + 0x4D, 0x53, 0x46, 0x54, 0x20, 0x20, 0x45, 0x44, 0x4B, 0x32,
> + 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53,
> + 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x40,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> +};
> +
> +//
> +// Reference the table being generated to prevent the optimizer from removing the
> +// data structure from the executable
> +//
> +VOID* CONST ReferenceAcpiTable = &Gtdt;
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Madt.aslc b/Platform/Raspberry/Pi3/AcpiTables/Madt.aslc
> new file mode 100644
> index 000000000000..69c96273f579
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Madt.aslc
> @@ -0,0 +1,62 @@
> +/** @file
> + *
> + * Multiple APIC Description Table (MADT)
> + *
> + * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +/*
> + * Even though the BCM283x don't contain a GIC, these
> + * GICC definitions enable multi-core support (with PSCI).
> + *
> + * Mind the signatures in the header, they must be kept.
> + */
> +UINT8 Madt[] = {
> + 0x41, 0x50, 0x49, 0x43, 0x6c, 0x01, 0x00, 0x00, 0x03, 0xaf, 0x42, 0x43,
> + 0x32, 0x38, 0x33, 0x36, 0x45, 0x44, 0x4b, 0x32, 0x20, 0x20, 0x20, 0x20,
> + 0x01, 0x00, 0x00, 0x00, 0x4d, 0x53, 0x46, 0x54, 0x01, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x50, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x01, 0x00, 0x00, 0x00, 0x0b, 0x50, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
> + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
> + 0x0b, 0x50, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00,
> + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x0b, 0x50, 0x00, 0x00,
> + 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x01, 0x00, 0x00, 0x00
> +};
> +
> +//
> +// Reference the table being generated to prevent the optimizer from removing the
> +// data structure from the executable
> +//
> +VOID* CONST ReferenceAcpiTable = &Madt;
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Pep.asl b/Platform/Raspberry/Pi3/AcpiTables/Pep.asl
> new file mode 100644
> index 000000000000..c0c5fca4c38a
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Pep.asl
> @@ -0,0 +1,95 @@
> +/** @file
> + *
> + * Platform Extension Plugin (PEP).
> + *
> + * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +Device(PEPD)
> +{
> + //
> + // RPI3 PEP virtual device.
> + //
> + Name (_HID, "BCM2854") // Note: since pep on rpi3 is virtual device,
> + Name (_CID, "BCM2854") // its device id needs to be generated by Microsoft
> + Name (_UID, 0x0)
> + Name (_CRS, ResourceTemplate ()
> + {
> + // No hardware resources for PEP driver are needed.
> + })
> +
> + //
> + // Processor info. PEP proprietary method to return
> + // PEP_PROCESSOR_TABLE_PLAT structure.
> + //
> + // See Pep.h and Pep.c.
> + //
> + Name (_GPI, Buffer()
> + {
> + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x5F, 0x00, 0x53,
> + 0x00, 0x42, 0x00, 0x2E, 0x00, 0x43, 0x00, 0x50, 0x00, 0x55, 0x00, 0x30,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> + })
> +
> + //
> + // Coordinated state info. PEP proprietary method to return
> + // PEP_COORDINATED_STATE_TABLE_PLAT structure.
> + //
> + // See Pep.h and Pep.c.
> + //
> + Name (_GCI, Buffer()
> + {
> + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x01,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
> + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00
> + })
> +
> + //
> + // Device info. PEP proprietary method to return
> + // PEP_DEVICE_TABLE_PLAT structure.
> + //
> + // See Pep.h and Pep.c.
> + //
> + Name (_GDI, Buffer()
> + {
> + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x5F, 0x00, 0x53,
> + 0x00, 0x42, 0x00, 0x2E, 0x00, 0x49, 0x00, 0x32, 0x00, 0x43, 0x00, 0x30,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09,
> + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> + })
> +}
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Pep.c b/Platform/Raspberry/Pi3/AcpiTables/Pep.c
> new file mode 100644
> index 000000000000..bf96178a7c11
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Pep.c
> @@ -0,0 +1,84 @@
> +/** @file
> + *
> + * PEP device tables
> + *
> + * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +#include "Pep.h"
> +
> +PEP_PROCESSOR_TABLE_PLAT RPI3Processors = {
> + 1, // Version
> + 1, // NumberProcessors
> + { // ProcessorInfo
> + { // [0]
> + L"\\_SB.CPU0", // DevicePath, wchar_t[16]
> + 0, // FeedbackCounterCount
> + 0x00000000, // Flags
> + 0, // NumberIdleStates
> + 0, // NumberPerfStates
> + { // IdleInfo
> + },
> + { // perfinfo
> + }
> + }
> + }
> +};
> +
> +PEP_COORDINATED_STATE_TABLE_PLAT RPI3CoordinatedStates = {
> + 1, // Version
> + 1, // CoordinatedStateCount
> + { // CordinatedStates[]
> + { // [0]
> + { // DependencyInfo
> + { // [0]
> + 1, // ExpectedState
> + 0, // TargetProcessor
> + 0x0 | 0x2 | 0x4, // LooseDependency = FALSE, InitialState = TRUE, DependentState = TRUE
> + }
> + },
> + SOC_STATE_TYPE, // StateType
> + 0x1, // Flags
> + 0, // Latency
> + 0, // BreakEvenDuration
> + 1, // DependencyCount
> + 1, // MaximumDependencySize
> + }
> + }
> +};
> +
> +PEP_DEVICE_TABLE_PLAT RPI3Devices = {
> + 1, // Version
> + 1, // NumberDevices
> + { // DeviceInfo
> + { // [1]
> + L"\\_SB.I2C0", // DevicePath, wchar_t[16]
> + 0x1 | (1 << 3), // DStateSupportMask (D0 and D3)
> + 1, // NumberCompoenents
> + { // DStateRequirement
> + { // [0]
> + PowerDeviceD3 // DState
> + }
> + },
> + { // FStateRequirement
> + { // [0]
> + { // FState
> + { // [0]
> + 0
> + }
> + }
> + }
> + }
> + }
> + }
> +};
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Pep.h b/Platform/Raspberry/Pi3/AcpiTables/Pep.h
> new file mode 100644
> index 000000000000..08fee8ce5704
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Pep.h
> @@ -0,0 +1,126 @@
> +/** @file
> + *
> + * PEP device defines
> + *
> + * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +/*
> + * Note: Not everything is here. At least SOC_STATE_TYPE is missing.
> + */
> +
> +#ifndef _RPI3PEP_H_INCLUDED_
> +#define _RPI3PEP_H_INCLUDED_
> +
> +#include <IndustryStandard/Acpi50.h>
> +
> +#define PEP_MAX_DEPENDENCIES_PER_STATE 16
> +#define MAX_PROCESSOR_PATH_LENGTH 16
> +#define MAX_DEVICE_PATH_LENGTH 32
> +#define MAX_COMPONENT_COUNT 8
> +#define P_NUMBER_PROCESSORS 1
> +#define P_NUMBER_IDLE_STATES 1
> +#define P_NUMBER_PERF_STATES 0
> +#define P_NUMBER_DEVICES 1
> +#define P_NUMBER_COORDINATED_STATS 1
> +
> +typedef struct _PEP_PROCESSOR_IDLE_STATE_INFO {
> + UINT32 Ulong;
> + UINT32 Latency;
> + UINT32 BreakEvenDuration;
> +} PEP_PROCESSOR_IDLE_STATE_INFO, *PEP_PROCESSOR_IDLE_STATE_INFO;
> +
> +typedef struct _PEP_PROCESSOR_IDLE_INFO_PLAT {
> + //
> + // Processor idle states.
> + //
> + PEP_PROCESSOR_IDLE_STATE_INFO IdleStates[P_NUMBER_IDLE_STATES];
> +} PEP_PROCESSOR_IDLE_INFO_PLAT, *PPEP_PROCESSOR_IDLE_INFO_PLAT;
> +
> +typedef struct COORDINATED_DEPENDENCY_INFO {
> + UINT32 ExpectedState;
> + UINT32 TargetProcessor;
> + UINT32 Ulong;
> +} COORDINATED_DEPENDENCY_INFO, *PCOORDINATED_DEPENDENCY_INFO;
> +
> +typedef struct {
> + COORDINATED_DEPENDENCY_INFO DependencyInfo[PEP_MAX_DEPENDENCIES_PER_STATE];
> + UINT32 StateType;
> + UINT32 Ulong;
> + UINT32 Latency;
> + UINT32 BreakEvenDuration;
> + UINT32 DependencyCount;
> + UINT32 MaximumDependencySize;
> +} COORDINATED_STATE_INFO;
> +
> +typedef struct {
> + UINT32 Unused;
> +} PEP_PROCESSOR_PERF_INFO;
> +
> +typedef struct {
> + UINT32 FState[MAX_COMPONENT_COUNT];
> +} COORDINATED_FSTATE_REQUIREMENT;
> +
> +typedef struct {
> + UINT32 DState;
> +} COORDINATED_DSTATE_REQUIREMENT;
> +
> +//
> +// Top level device table
> +// *N.B. The exact length of the structure is determined by the NumberIdleStates/NumberPerfStates variables.
> +//
> +
> +typedef struct _PEP_PROCESSOR_INFO_PLAT {
> + WCHAR DevicePath[MAX_PROCESSOR_PATH_LENGTH]; // Null-terminated ACPI name
> + ULONG FeedbackCounterCount;
> + ULONG Flags;
> +
> + //
> + // We are putting the idle/perf state count here (instead
> + // of the PEP_PROCESSOR_xxx_INFO structure for the ease of parsing.
> + //
> + ULONG NumberIdleStates;
> + ULONG NumberPerfStates;
> +
> + PEP_PROCESSOR_IDLE_INFO_PLAT IdleInfo;
> + PEP_PROCESSOR_PERF_INFO PerfInfo;
> +} PEP_PROCESSOR_INFO_PLAT, *PPEP_PROCESSOR_INFO_PLAT;
> +
> +typedef struct _PEP_PROCESSOR_TABLE_PLAT {
> + UINT32 Version;
> + UINT32 NumberProcessors;
> + PEP_PROCESSOR_INFO_PLAT ProcessorInfo[P_NUMBER_PROCESSORS];
> +} PEP_PROCESSOR_TABLE_PLAT;
> +
> +typedef struct _PEP_COORDINATED_STATE_TABLE_PLAT {
> + ULONG Version;
> + ULONG CoordinatedStateCount;
> + COORDINATED_STATE_INFO CoordinatedStates[P_NUMBER_COORDINATED_STATS];
> +} PEP_COORDINATED_STATE_TABLE_PLAT, *PPEP_COORDINATED_STATE_TABLE_PLAT;
> +
> +typedef struct _PEP_DEVICE_INFO_PLAT {
> + WCHAR DevicePath[MAX_DEVICE_PATH_LENGTH]; // Null-terminated ACPI name
> + ULONG DStateSupportMask;
> + ULONG NumberComponents;
> +
> + COORDINATED_DSTATE_REQUIREMENT DStateRequirement[P_NUMBER_COORDINATED_STATS];
> + COORDINATED_FSTATE_REQUIREMENT FStateRequirement[P_NUMBER_COORDINATED_STATS];
> +} PEP_DEVICE_INFO_PLAT, *PPEP_DEVICE_INFO_PLAT;
> +
> +typedef struct _PEP_DEVICE_TABLE_PLAT {
> + ULONG Version;
> + ULONG NumberDevices;
> + PEP_DEVICE_INFO_PLAT DeviceInfo[P_NUMBER_DEVICES];
> +} PEP_DEVICE_TABLE_PLAT, *PPEP_DEVICE_TABLE_PLAT;
> +
> +#endif // _RPI3PEP_H_INCLUDED_
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Rhpx.asl b/Platform/Raspberry/Pi3/AcpiTables/Rhpx.asl
> new file mode 100644
> index 000000000000..b2127c02e927
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Rhpx.asl
> @@ -0,0 +1,201 @@
> +/** @file
> + *
> + * [DSDT] RHProxy device to enable WinRT API (RHPX)
> + *
> + * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +Device (RHPX)
> +{
> + Name (_HID, "MSFT8000")
> + Name (_CID, "MSFT8000")
> + Name (_UID, 1)
> +
> + Name(_CRS, ResourceTemplate ()
> + {
> + // Index 0
> + SPISerialBus ( // SCKL - GPIO 11 - Pin 23
> + // MOSI - GPIO 10 - Pin 19
> + // MISO - GPIO 9 - Pin 21
> + // CE0 - GPIO 8 - Pin 24
> + 0, // Device selection (CE0)
> + PolarityLow, // Device selection polarity
> + FourWireMode, // WireMode
> + 8, // DataBit len
> + ControllerInitiated, // Slave mode
> + 4000000, // Connection speed
> + ClockPolarityLow, // Clock polarity
> + ClockPhaseFirst, // Clock phase
> + "\\_SB.SPI0", // ResourceSource: SPI bus controller name
> + 0, // ResourceSourceIndex
> + // Resource usage
> + // DescriptorName: creates name for offset of resource descriptor
> + ) // Vendor Data
> +
> + // Index 1
> + SPISerialBus ( // SCKL - GPIO 11 - Pin 23
> + // MOSI - GPIO 10 - Pin 19
> + // MISO - GPIO 9 - Pin 21
> + // CE1 - GPIO 7 - Pin 26
> + 1, // Device selection (CE1)
> + PolarityLow, // Device selection polarity
> + FourWireMode, // WireMode
> + 8, // DataBit len
> + ControllerInitiated, // Slave mode
> + 4000000, // Connection speed
> + ClockPolarityLow, // Clock polarity
> + ClockPhaseFirst, // Clock phase
> + "\\_SB.SPI0", // ResourceSource: SPI bus controller name
> + 0, // ResourceSourceIndex
> + // Resource usage
> + // DescriptorName: creates name for offset of resource descriptor
> + ) // Vendor Data
> +
> + // Index 2
> + I2CSerialBus ( // Pin 3 (GPIO2, SDA1), 5 (GPIO3, SCL1)
> + 0xFFFF, // SlaveAddress: placeholder
> + , // SlaveMode: default to ControllerInitiated
> + 0, // ConnectionSpeed: placeholder
> + , // Addressing Mode: default to 7 bit
> + "\\_SB.I2C1", // ResourceSource: I2C bus controller name
> + ,
> + ,
> + , // Descriptor Name: creates name for offset of resource descriptor
> + ) // Vendor Data
> +
> + // Index 3
> + SPISerialBus ( // SPI1_SCLK - GPIO21
> + // SPI1_MOSI - GPIO20
> + // SPI1_MISO - GPIO19
> + // SPI1_CE2_N - GPIO16
> + 2, // Device selection (CE2)
> + PolarityLow, // Device selection polarity
> + FourWireMode, // WireMode
> + 8, // DataBit len
> + ControllerInitiated, // Slave mode
> + 4000000, // Connection speed
> + ClockPolarityLow, // Clock polarity
> + ClockPhaseFirst, // Clock phase
> + "\\_SB.SPI1", // ResourceSource: SPI bus controller name
> + 0, // ResourceSourceIndex
> + // Resource usage
> + // DescriptorName: creates name for offset of resource descriptor
> + ) // Vendor Data
> +
> + // GPIO 2
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 2 }
> + GpioInt (Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 2 }
> + // GPIO 3
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 3 }
> + GpioInt (Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 3 }
> + // GPIO 4
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 4 }
> + GpioInt (Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 4 }
> + // GPIO 5
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 5 }
> + GpioInt (Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 5 }
> + // GPIO 6
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 6 }
> + GpioInt (Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 6 }
> + // GPIO 7
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 7 }
> + GpioInt (Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 7 }
> + // GPIO 8
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 8 }
> + GpioInt (Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 8 }
> + // GPIO 9
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 9 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 9 }
> + // GPIO 10
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 10 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 10 }
> + // GPIO 11
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 11 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 11 }
> + // GPIO 12
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 12 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 12 }
> + // GPIO 13
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 13 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 13 }
> + // NTRAID#MSFT-7141401-2016/04/7-jordanrh - disable UART muxing
> + // until a proper solution can be created for the dmap conflict
> + // GPIO 14 - UART TX
> + // GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 14 }
> + // GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 14 }
> + // GPIO 15 - UART RX
> + // GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 15 }
> + // GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 15 }
> + // GPIO 16
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 16 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 16 }
> + // GPIO 17
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 17 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 17 }
> + // GPIO 18
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 18 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 18 }
> + // GPIO 19
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 19 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 19 }
> + // GPIO 20
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 20 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 20 }
> + // GPIO 21
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 21 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 21 }
> + // GPIO 22
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 22 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 22 }
> + // GPIO 23
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 23 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 23 }
> + // GPIO 24
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 24 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 24 }
> + // GPIO 25
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 25 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 25 }
> + // GPIO 26
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 26 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 26 }
> + // GPIO 27
> + GpioIO (Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer,,) { 27 }
> + GpioInt (Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 27 }
> + })
> +
> + Name (_DSD, Package()
> + {
> + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> + Package ()
> + {
> + // Reference http://www.raspberrypi.org/documentation/hardware/raspberrypi/spi/README.md
> + // SPI 0
> + Package (2) { "bus-SPI-SPI0", Package() { 0, 1 } }, // Index 0 & 1
> + Package (2) { "SPI0-MinClockInHz", 7629 }, // 7629 Hz
> + Package (2) { "SPI0-MaxClockInHz", 125000000 }, // 125 MHz
> + Package (2) { "SPI0-SupportedDataBitLengths", Package() { 8 } }, // Data Bit Length
> + // I2C1
> + Package (2) { "bus-I2C-I2C1", Package() { 2 } },
> + // GPIO Pin Count and supported drive modes
> + Package (2) { "GPIO-PinCount", 54 },
> + Package (2) { "GPIO-UseDescriptorPinNumbers", 1 },
> + Package (2) { "GPIO-SupportedDriveModes", 0xf }, // InputHighImpedance, InputPullUp, InputPullDown, OutputCmos
> + // SPI 1
> + Package (2) { "bus-SPI-SPI1", Package() { 3 }}, // Index 3
> + Package (2) { "SPI1-MinClockInHz", 30511 }, // 30.5 kHz
> + Package (2) { "SPI1-MaxClockInHz", 20000000 }, // 20 MHz
> + Package (2) { "SPI1-SupportedDataBitLengths", Package() { 8 } }, // Data Bit Length
> + }
> + })
> +}
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Sdhc.asl b/Platform/Raspberry/Pi3/AcpiTables/Sdhc.asl
> new file mode 100644
> index 000000000000..e912b16c5ff7
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Sdhc.asl
> @@ -0,0 +1,105 @@
> +/** @file
> + *
> + * [DSDT] SD controller/card definition (SDHC)
> + *
> + * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +//
> +// Note: UEFI can use either SDHost or Arasan. We expose both to the OS.
> +//
> +
> +// ArasanSD 3.0 SD Host Controller.
> +Device (SDC1)
> +{
> + Name (_HID, "BCM2847")
> + Name (_CID, "ARASAN")
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> + Name (_S1D, 0x1)
> + Name (_S2D, 0x1)
> + Name (_S3D, 0x1)
> + Name (_S4D, 0x1)
> + Method (_STA)
> + {
> + Return(0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED (ReadWrite, 0x3F300000, 0x100,)
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x5E }
> + })
> + Return (RBUF)
> + }
> +
> + //
> + // A child device that represents the
> + // sd card, which is marked as non-removable.
> + //
> + Device (SDMM)
> + {
> + Method (_ADR)
> + {
> + Return (0)
> + }
> + Method (_RMV) // Is removable
> + {
> + Return (0) // 0 - fixed
> + }
> + }
> +}
> +
> +
> +// Broadcom SDHost 2.0 SD Host Controller
> +Device (SDC2)
> +{
> + Name (_HID, "BCM2855")
> + Name (_CID, "SDHST")
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> + Name (_S1D, 0x1)
> + Name (_S2D, 0x1)
> + Name (_S3D, 0x1)
> + Name (_S4D, 0x1)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED (ReadWrite, 0x3F202000, 0x100,)
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x58 }
> + })
> + Return (RBUF)
> + }
> +
> + //
> + // A child device that represents the
> + // sd card, which is marked as non-removable.
> + //
> + Device (SDMM)
> + {
> + Method (_ADR)
> + {
> + Return (0)
> + }
> + Method (_RMV) // Is removable
> + {
> + Return (0) // 0 - fixed
> + }
> + }
> +}
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Spcr.asl b/Platform/Raspberry/Pi3/AcpiTables/Spcr.asl
> new file mode 100644
> index 000000000000..c5a5f6e0af00
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Spcr.asl
> @@ -0,0 +1,53 @@
> +/** @file
> + *
> + * Serial Port Console Redirection Table (SPCR)
> + *
> + * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +[000h 0000 4] Signature : "SPCR" [Serial Port Console Redirection table]
> +[004h 0004 4] Table Length : 00000050
> +[008h 0008 1] Revision : 02
> +[009h 0009 1] Checksum : 00
> +[00Ah 0010 6] Oem ID : "RPiEFI"
> +[010h 0016 8] Oem Table ID : "RPi3UEFI"
> +[018h 0024 4] Oem Revision : 00000001
> +[01Ch 0028 4] Asl Compiler ID : "----"
> +[020h 0032 4] Asl Compiler Revision : 00000000
> +
> +[024h 0036 1] Interface Type : 10
> +[025h 0037 3] Reserved : 000000
> +
> +[028h 0040 12] Serial Port Register : [Generic Address Structure]
> +[028h 0040 1] Space ID : 00 [SystemMemory]
> +[029h 0041 1] Bit Width : 20
> +[02Ah 0042 1] Bit Offset : 00
> +[02Bh 0043 1] Encoded Access Width : 03 [DWord Access:32]
> +[02Ch 0044 8] Address : 000000003f215000
> +
> +[034h 0052 1] Interrupt Type : 0E
> +[035h 0053 1] PCAT-compatible IRQ : 00
> +[036h 0054 4] Interrupt : 3D
> +[03Ah 0058 1] Baud Rate : 07
> +[03Bh 0059 1] Parity : 00
> +[03Ch 0060 1] Stop Bits : 01
> +[03Dh 0061 1] Flow Control : 00
> +[03Eh 0062 1] Terminal Type : 00
> +[04Ch 0076 1] Reserved : 00
> +[040h 0064 2] PCI Device ID : FFFF
> +[042h 0066 2] PCI Vendor ID : FFFF
> +[044h 0068 1] PCI Bus : 00
> +[045h 0069 1] PCI Device : 00
> +[046h 0070 1] PCI Function : 00
> +[047h 0071 4] PCI Flags : 00000000
> +[04Bh 0075 1] PCI Segment : 00
> +[04Ch 0076 4] Reserved : 00000000
> diff --git a/Platform/Raspberry/Pi3/AcpiTables/Uart.asl b/Platform/Raspberry/Pi3/AcpiTables/Uart.asl
> new file mode 100644
> index 000000000000..26fcef131758
> --- /dev/null
> +++ b/Platform/Raspberry/Pi3/AcpiTables/Uart.asl
> @@ -0,0 +1,158 @@
> +/** @file
> + *
> + * [DSDT] Serial devices (UART).
> + *
> + * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
> + * Copyright (c) Microsoft Corporation. All rights reserved.
> + *
> + * This program and the accompanying materials
> + * are licensed and made available under the terms and conditions of the BSD License
> + * which accompanies this distribution. The full text of the license may be found at
> + * http://opensource.org/licenses/bsd-license.php
> + *
> + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> + *
> + **/
> +
> +// PL011 based UART.
> +Device (URT0)
> +{
> + Name (_HID, "BCM2837")
> + Name (_CID, "HID3123")
> + Name (_UID, 0x4)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED (ReadWrite, 0x3F201000, 0x1000,)
> + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x59 }
> + })
> + Return (RBUF)
> + }
> +
> + Name (CLCK, 3000000)
> +
> + Name (_DSD, Package ()
> + {
> + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package ()
> + {
> + Package (2) { "clock-frequency", CLCK },
> + }
> + })
> +}
> +
> +//
> +// UART Mini.
> +//
> +// This device is referenced in the DBG2 table, which will cause the system to
> +// not start the driver when the debugger is enabled and to mark the device
> +// with problem code 53 (CM_PROB_USED_BY_DEBUGGER).
> +//
> +
> +Device (URTM)
> +{
> + Name (_HID, "BCM2836")
> + Name (_CID, "MINIUART")
> + Name (_UID, 0x0)
> + Name (_CCA, 0x0)
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + MEMORY32FIXED (ReadWrite, 0x3F215000, 0x70,)
> + Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) {0x3D}
> +
> + // NTRAID#MSFT-7141401-2016/04/7-jordanrh - disable UART muxing
> + // until a proper solution can be created for the dmap conflict.
> + // When muxing is enabled, must consider DBG2 table conflict.
> + // The alternate function resource needs to be reserved when
> + // the kernel debugger is enabled to prevent another client
> + // from muxing the pins away.
> +
> + //
> + // MsftFunctionConfig is encoded as the VendorLong.
> + //
> + // MsftFunctionConfig(Exclusive, PullDown, BCM_ALT5, "\\_SB.GPI0", 0, ResourceConsumer, ) {14, 15}
> + // VendorLong () // Length = 0x31
> + // {
> + // /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
> + // /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
> + // /* 0010 */ 0x2F, 0x8D, 0x1D, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
> + // /* 0018 */ 0x02, 0x00, 0x12, 0x00, 0x00, 0x16, 0x00, 0x20, // .......
> + // /* 0020 */ 0x00, 0x00, 0x00, 0x0E, 0x00, 0x0F, 0x00, 0x5C, // .......\
> + // /* 0028 */ 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, // _SB.GPI0
> + // /* 0030 */ 0x00 // .
> + //}
> +
> + })
> + Return (RBUF)
> + }
> +}
> +
> +//
> +// Multifunction serial bus device to support Bluetooth function.
> +//
> +Device(BTH0)
> +{
> + Name (_HID, "BCM2EA6")
> + Name (_CID, "BCM2EA6")
> + Method (_STA)
> + {
> + Return (0xf)
> + }
> + Method (_CRS, 0x0, Serialized)
> + {
> + Name (RBUF, ResourceTemplate ()
> + {
> + // BT UART: UART0 (PL011)
> + UARTSerialBus(
> + 115200, // InitialBaudRate: in BPS
> + , // BitsPerByte: default to 8 bits
> + , // StopBits: Defaults to one bit
> + 0x00, // LinesInUse: 8 1-bit flags to
> + // declare enabled control lines.
> + // Raspberry Pi does not exposed
> + // HW control signals -> not supported.
> + // Optional bits:
> + // - Bit 7 (0x80) Request To Send (RTS)
> + // - Bit 6 (0x40) Clear To Send (CTS)
> + // - Bit 5 (0x20) Data Terminal Ready (DTR)
> + // - Bit 4 (0x10) Data Set Ready (DSR)
> + // - Bit 3 (0x08) Ring Indicator (RI)
> + // - Bit 2 (0x04) Data Carrier Detect (DTD)
> + // - Bit 1 (0x02) Reserved. Must be 0.
> + // - Bit 0 (0x01) Reserved. Must be 0.
> + , // IsBigEndian:
> + // default to LittleEndian.
> + , // Parity: Defaults to no parity
> + , // FlowControl: Defaults to
> + // no flow control.
> + 16, // ReceiveBufferSize
> + 16, // TransmitBufferSize
> + "\\_SB.URT0", // ResourceSource:
> + // UART bus controller name
> + , // ResourceSourceIndex: assumed to be 0
> + , // ResourceUsage: assumed to be
> + // ResourceConsumer
> + UAR0, // DescriptorName: creates name
> + // for offset of resource descriptor
> + ) // Vendor data
> +
> + //
> + // RPIQ connection for BT_ON/OFF
> + //
> + GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.RPIQ", 0, ResourceConsumer, , ) { 128 }
> + })
> + Return (RBUF)
> + }
> +}
> --
> 2.17.0.windows.1
>
next prev parent reply other threads:[~2019-01-28 13:24 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-28 12:44 [PATCH v3 edk2-platforms 00/23] Platform/Raspberry: Add Raspberry Pi 3 support Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 01/23] Silicon/Broadcom/Bcm282x: Add interrupt driver Pete Batard
2019-01-28 12:59 ` Ard Biesheuvel
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 02/23] Silicon/Broadcom/Bcm283x: Add GpioLib Pete Batard
2019-01-28 13:02 ` Ard Biesheuvel
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 03/23] Platform/Raspberry/Pi3: Add ACPI tables Pete Batard
2019-01-28 13:24 ` Ard Biesheuvel [this message]
2019-01-29 12:54 ` Pete Batard
2019-01-29 12:57 ` Ard Biesheuvel
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 04/23] Platform/Raspberry/Pi3: Add reset and memory init libraries Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 05/23] Platform/Raspberry/Pi3: Add platform library Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 06/23] Platform/Raspberry/Pi3: Add RTC library Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 07/23] Platform/Raspberry/Pi3: Add firmware driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 08/23] Platform/Raspberry/Pi3: Add platform config driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 09/23] Platform/Raspberry/Pi3: Add SMBIOS driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 10/23] Platform/Raspberry/Pi3: Add display driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 11/23] Platform/Raspberry/Pi3: Add console driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 12/23] Platform/Raspberry/Pi3: Add NV storage driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 13/23] Platform/Raspberry/Pi3: Add Device Tree driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 14/23] Platform/Raspberry/Pi3: Add base MMC driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 15/23] Platform/Raspberry/Pi3: Add Arasan " Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 16/23] Platform/Raspberry/Pi3: Add SD Host driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 17/23] Platform/Raspberry/Pi3: Add platform boot manager and helper libraries Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 18/23] Platform/Raspberry/Pi3: Add USB host driver Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 19/23] Platform/Raspberry/Pi3: Add platform Pete Batard
2019-01-28 13:10 ` Ard Biesheuvel
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 20/23] Platform/Raspberry/Pi3: Add platform readme Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 21/23] Platform/Raspberry/Pi3 *NON-OSI*: Add ATF binaries Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 2/23] Platform/Raspberry/Pi3 *NON-OSI*: Add Device Tree binaries Pete Batard
2019-01-28 12:44 ` [PATCH v3 edk2-platforms 23/23] Platform/Raspberry/Pi3 *NON-OSI*: Add logo driver Pete Batard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAKv+Gu--YKjvjB_SU9bZ3ncEppxWGq1N2VDbKiDazBiwqAS8EA@mail.gmail.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox