* [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support
@ 2018-12-07 12:05 Pete Batard
2018-12-07 12:05 ` [PATCH v1 edk2-platfoms 1/2] " Pete Batard
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Pete Batard @ 2018-12-07 12:05 UTC (permalink / raw)
To: edk2-devel
Preamble:
Because of its price point, ease of use and availability, the Raspberry Pi is
undeniably one of the most successful ARM platform in existence today. Its
widespread adoption therefore makes it a perfect fit as an EDK2 platform.
However, up until now, the Raspberry Pi hasn't been supported as a bona fide
platform in our repository. This series of patches remedies that by introducing
the Raspberry Pi 3 Model B and Model B+ as a viable EDK2 platforms.
Patch Breakdown:
Since this is a platform introduction, we simply chose to break the commits
into edk2-platforms and edk2-non-osi components, as we see little point in
splitting the series into further subcomponents, when the structure would be
similar to the overall subdirectory layout and of course, one needs to apply
all components at once to be able to test the firmware.
PATCH 1/2 therefore contains the edk2-platform components and PATCH 2/2 the
edk2-non-osi components.
With regards to the latter:
- Even though the ARM Trusted Firmware binary blobs are subject to a
BSD-3-Clause licence, which may be compatible with the EDK2 one, we chose
to follow the lead of other platforms that provide ATF binaries in non OSI.
- The Device Tree binaries (and source descriptors) are subject to a GPLv2
license, as per the ones published by the Raspberry Pi Foundation.
- The DwUsbHostDxe driver is subject to a GPLv2 license
- The Logo source code is under an EDK2 license, but the logo itself, which
we obtained authorisation to use from the Raspberry Pi Foundation itself,
after detailing our planned usage, is subject to the trademark licensing
terms put forward by the Raspberry Pi Foundation, and therefore we chose
to move the whole Logo driver under non OSI.
Additional Notes:
- We chose to introduce the platform under Broadcom/Bcm283x/ as we consider
first, that additional Broadcom platforms may be introduced, and second that
even though only Bcm2837 (i.e. Pi 3) platforms are supported from the current
RaspberryPiPkg, support may be added for Bcm2836 (Pi 2) in the future, hence
our decision to use a generic Bcm283x/ subdirectory.
- The ARM Trusted Firmware being used is a vanilla version built from the
latest tree, as we worked with that project to get necessary patches
integrated.
- Detailed instructions on how to build and test the platform firmware are
included in the Readme.md found at the root of the platform.
- As detailed in the Readme, the resulting platform firmware has been
successfully used to install and run Linux OSes, such as Ubuntu 18.10, as
well as Windows 10 1809 (*full* UI version, not IoT).
Regards,
/Pete
Pete Batard (1/2):
Platform/Broadcom: Add Raspberry Pi 3 support
.../Bcm283x/AcpiTables/AcpiTables.inf | 51 +
.../Broadcom/Bcm283x/AcpiTables/Csrt.aslc | 337 +++
.../Broadcom/Bcm283x/AcpiTables/Dbg2.aslc | 32 +
Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl | 523 +++++
.../Broadcom/Bcm283x/AcpiTables/Fadt.aslc | 50 +
.../Broadcom/Bcm283x/AcpiTables/Gtdt.aslc | 31 +
.../Broadcom/Bcm283x/AcpiTables/Madt.aslc | 60 +
Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl | 92 +
Platform/Broadcom/Bcm283x/AcpiTables/Pep.c | 84 +
Platform/Broadcom/Bcm283x/AcpiTables/Pep.h | 126 ++
.../Broadcom/Bcm283x/AcpiTables/Platform.h | 82 +
Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl | 201 ++
Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl | 105 +
Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl | 53 +
Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl | 155 ++
.../ArasanMmcHostDxe/ArasanMmcHostDxe.c | 730 +++++++
.../ArasanMmcHostDxe/ArasanMmcHostDxe.h | 50 +
.../ArasanMmcHostDxe/ArasanMmcHostDxe.inf | 53 +
.../Bcm2836InterruptDxe/Bcm2836InterruptDxe.c | 367 ++++
.../Bcm2836InterruptDxe.inf | 48 +
.../Bcm283x/Drivers/ConfigDxe/ConfigDxe.c | 356 ++++
.../Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf | 81 +
.../Drivers/ConfigDxe/ConfigDxeFormSetGuid.h | 23 +
.../Drivers/ConfigDxe/ConfigDxeHii.uni | 100 +
.../Drivers/ConfigDxe/ConfigDxeHii.vfr | 306 +++
.../Drivers/DisplayDxe/ComponentName.c | 222 ++
.../Bcm283x/Drivers/DisplayDxe/DisplayDxe.c | 606 ++++++
.../Bcm283x/Drivers/DisplayDxe/DisplayDxe.h | 43 +
.../Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf | 71 +
.../Bcm283x/Drivers/DisplayDxe/Screenshot.c | 379 ++++
.../GraphicsConsoleDxe/ComponentName.c | 183 ++
.../GraphicsConsoleDxe/GraphicsConsole.c | 1836 +++++++++++++++++
.../GraphicsConsoleDxe/GraphicsConsole.h | 591 ++++++
.../GraphicsConsoleDxe/GraphicsConsoleDxe.inf | 74 +
.../GraphicsConsoleDxe/GraphicsConsoleDxe.uni | 19 +
.../GraphicsConsoleDxeExtra.uni | 20 +
.../Drivers/GraphicsConsoleDxe/NewFont.c | 288 +++
.../Bcm283x/Drivers/PiMmcDxe/ComponentName.c | 163 ++
.../Bcm283x/Drivers/PiMmcDxe/Diagnostics.c | 256 +++
.../Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c | 458 ++++
.../Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h | 533 +++++
.../Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c | 473 +++++
.../Bcm283x/Drivers/PiMmcDxe/MmcDebug.c | 169 ++
.../Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf | 58 +
.../Drivers/PiMmcDxe/MmcIdentification.c | 993 +++++++++
.../PlatformSmbiosDxe/PlatformSmbiosDxe.c | 915 ++++++++
.../PlatformSmbiosDxe/PlatformSmbiosDxe.inf | 56 +
.../Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c | 370 ++++
.../Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf | 53 +
.../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 1085 ++++++++++
.../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf | 49 +
.../Bcm283x/Drivers/SdHostDxe/SdHostDxe.c | 830 ++++++++
.../Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf | 54 +
.../Drivers/VarBlockServiceDxe/FileIo.c | 196 ++
.../Drivers/VarBlockServiceDxe/FvbInfo.c | 118 ++
.../VarBlockServiceDxe/VarBlockService.c | 984 +++++++++
.../VarBlockServiceDxe/VarBlockService.h | 217 ++
.../VarBlockServiceDxe/VarBlockServiceDxe.c | 334 +++
.../VarBlockServiceDxe/VarBlockServiceDxe.inf | 93 +
.../Include/IndustryStandard/Bcm2836.h | 70 +
.../Include/IndustryStandard/Bcm2836MmcHs.h | 199 ++
.../Include/IndustryStandard/Bcm2836SdHost.h | 92 +
.../Include/IndustryStandard/Bcm2837Gpio.h | 50 +
.../Include/IndustryStandard/RpiFirmware.h | 93 +
.../Bcm283x/Include/Library/GpioLib.h | 33 +
.../Broadcom/Bcm283x/Include/Protocol/DwUsb.h | 53 +
.../Include/Protocol/ExtendedTextOut.h | 36 +
.../Bcm283x/Include/Protocol/PiMmcHost.h | 187 ++
.../Include/Protocol/RaspberryPiFirmware.h | 131 ++
Platform/Broadcom/Bcm283x/Include/Utils.h | 33 +
.../Bcm283x/Library/GpioLib/GpioLib.c | 79 +
.../Bcm283x/Library/GpioLib/GpioLib.inf | 39 +
.../MemoryInitPeiLib/MemoryInitPeiLib.c | 183 ++
.../MemoryInitPeiLib/MemoryInitPeiLib.inf | 51 +
.../PlatformBootManagerLib/PlatformBm.c | 831 ++++++++
.../PlatformBootManagerLib/PlatformBm.h | 60 +
.../PlatformBootManagerLib.inf | 90 +
.../AArch64/RaspberryPiHelper.S | 107 +
.../RaspberryPiPlatformLib/RaspberryPi.c | 99 +
.../RaspberryPiPlatformLib/RaspberryPiMem.c | 160 ++
.../RaspberryPiPlatformLib.inf | 64 +
.../Bcm283x/Library/ResetLib/ResetLib.c | 104 +
.../Bcm283x/Library/ResetLib/ResetLib.inf | 46 +
.../VirtualRealTimeClockLib.c | 222 ++
.../VirtualRealTimeClockLib.inf | 43 +
Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec | 63 +
Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc | 636 ++++++
Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf | 450 ++++
Platform/Broadcom/Bcm283x/Readme.md | 263 +++
89 files changed, 21452 insertions(+)
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Csrt.aslc
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Dbg2.aslc
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Fadt.aslc
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Gtdt.aslc
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Madt.aslc
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Pep.c
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Pep.h
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Platform.h
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl
create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeFormSetGuid.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.uni
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.vfr
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/ComponentName.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/Screenshot.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/ComponentName.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.uni
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxeExtra.uni
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/NewFont.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/ComponentName.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Diagnostics.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDebug.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcIdentification.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836MmcHs.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836SdHost.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2837Gpio.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/RpiFirmware.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/Library/GpioLib.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/DwUsb.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/ExtendedTextOut.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/PiMmcHost.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/RaspberryPiFirmware.h
create mode 100644 Platform/Broadcom/Bcm283x/Include/Utils.h
create mode 100644 Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c
create mode 100644 Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.inf
create mode 100644 Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
create mode 100644 Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
create mode 100644 Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.c
create mode 100644 Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.h
create mode 100644 Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/AArch64/RaspberryPiHelper.S
create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPi.c
create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiMem.c
create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
create mode 100644 Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.c
create mode 100644 Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.inf
create mode 100644 Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
create mode 100644 Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.inf
create mode 100644 Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
create mode 100644 Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc
create mode 100644 Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf
create mode 100644 Platform/Broadcom/Bcm283x/Readme.md
Pete Batard (2/2):
Platform/Broadcom: Add Raspberry Pi 3 support (non OSI)
Platform/Broadcom/Bcm283x/Binary/License.txt | 26 +
Platform/Broadcom/Bcm283x/Binary/README.md | 41 +
Platform/Broadcom/Bcm283x/Binary/bl1.bin | Bin 0 -> 18801 bytes
Platform/Broadcom/Bcm283x/Binary/fip.bin | Bin 0 -> 41714 bytes
.../Broadcom/Bcm283x/DeviceTree/License.txt | 340 ++++
.../DeviceTree/bcm2710-rpi-3-b-plus.dtb | Bin 0 -> 25617 bytes
.../DeviceTree/bcm2710-rpi-3-b-plus.dts | 1263 +++++++++++++
.../Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb | Bin 0 -> 25354 bytes
.../Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts | 1259 +++++++++++++
.../Drivers/DwUsbHostDxe/ComponentName.c | 219 +++
.../Drivers/DwUsbHostDxe/DriverBinding.c | 269 +++
.../Drivers/DwUsbHostDxe/DwUsbHostDxe.c | 1644 +++++++++++++++++
.../Drivers/DwUsbHostDxe/DwUsbHostDxe.h | 159 ++
.../Drivers/DwUsbHostDxe/DwUsbHostDxe.inf | 52 +
.../Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h | 782 ++++++++
.../Bcm283x/Drivers/DwUsbHostDxe/License.txt | 340 ++++
.../Broadcom/Bcm283x/Drivers/Logo/License.txt | 10 +
.../Broadcom/Bcm283x/Drivers/Logo/Logo.bmp | Bin 0 -> 185398 bytes
Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c | 159 ++
.../Broadcom/Bcm283x/Drivers/Logo/Logo.eps | Bin 0 -> 250982 bytes
.../Broadcom/Bcm283x/Drivers/Logo/Logo.idf | 18 +
.../Broadcom/Bcm283x/Drivers/Logo/Logo.inf | 34 +
.../Broadcom/Bcm283x/Drivers/Logo/Logo.uni | 20 +
.../Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf | 63 +
.../Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni | 19 +
.../Bcm283x/Drivers/Logo/LogoDxeExtra.uni | 19 +
.../Bcm283x/Drivers/Logo/LogoExtra.uni | 19 +
27 files changed, 6755 insertions(+)
create mode 100644 Platform/Broadcom/Bcm283x/Binary/License.txt
create mode 100644 Platform/Broadcom/Bcm283x/Binary/README.md
create mode 100644 Platform/Broadcom/Bcm283x/Binary/bl1.bin
create mode 100644 Platform/Broadcom/Bcm283x/Binary/fip.bin
create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/License.txt
create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dtb
create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dts
create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb
create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/ComponentName.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DriverBinding.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/License.txt
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/License.txt
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.bmp
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.eps
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.idf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.uni
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxeExtra.uni
create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoExtra.uni
--
2.17.0.windows.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v1 edk2-platfoms 1/2] Platform/Broadcom: Add Raspberry Pi 3 support
2018-12-07 12:05 [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Pete Batard
@ 2018-12-07 12:05 ` Pete Batard
2018-12-07 12:05 ` [PATCH v1 edk2-platfoms 2/2] Platform/Broadcom: Add Raspberry Pi 3 support (non OSI) Pete Batard
2018-12-07 14:08 ` [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Ard Biesheuvel
2 siblings, 0 replies; 6+ messages in thread
From: Pete Batard @ 2018-12-07 12:05 UTC (permalink / raw)
To: edk2-devel
This commit contains the edk2-platform components that introduce
support for the Raspberry Pi 3 as a platform, based on the original
work by Ard Biesheuvel and Andrei Warkentin.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf | 51 +
Platform/Broadcom/Bcm283x/AcpiTables/Csrt.aslc | 337 ++++
Platform/Broadcom/Bcm283x/AcpiTables/Dbg2.aslc | 32 +
Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl | 523 ++++++
Platform/Broadcom/Bcm283x/AcpiTables/Fadt.aslc | 50 +
Platform/Broadcom/Bcm283x/AcpiTables/Gtdt.aslc | 31 +
Platform/Broadcom/Bcm283x/AcpiTables/Madt.aslc | 60 +
Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl | 92 +
Platform/Broadcom/Bcm283x/AcpiTables/Pep.c | 84 +
Platform/Broadcom/Bcm283x/AcpiTables/Pep.h | 126 ++
Platform/Broadcom/Bcm283x/AcpiTables/Platform.h | 82 +
Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl | 201 +++
Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl | 105 ++
Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl | 53 +
Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl | 155 ++
Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c | 730 ++++++++
Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h | 50 +
Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf | 53 +
Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c | 367 ++++
Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf | 48 +
Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.c | 356 ++++
Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf | 81 +
Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeFormSetGuid.h | 23 +
Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.uni | 100 ++
Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.vfr | 306 ++++
Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/ComponentName.c | 222 +++
Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.c | 606 +++++++
Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.h | 43 +
Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf | 71 +
Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/Screenshot.c | 379 ++++
Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/ComponentName.c | 183 ++
Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.c | 1836 ++++++++++++++++++++
Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.h | 591 +++++++
Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf | 74 +
Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.uni | 19 +
| 20 +
Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/NewFont.c | 288 +++
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/ComponentName.c | 163 ++
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Diagnostics.c | 256 +++
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c | 458 +++++
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h | 533 ++++++
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c | 473 +++++
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDebug.c | 169 ++
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf | 58 +
Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcIdentification.c | 993 +++++++++++
Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c | 915 ++++++++++
Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf | 56 +
Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c | 370 ++++
Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf | 53 +
Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 1085 ++++++++++++
Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf | 49 +
Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.c | 830 +++++++++
Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf | 54 +
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c | 196 +++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c | 118 ++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c | 984 +++++++++++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h | 217 +++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c | 334 ++++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf | 93 +
Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h | 70 +
Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836MmcHs.h | 199 +++
Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836SdHost.h | 92 +
Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2837Gpio.h | 50 +
Platform/Broadcom/Bcm283x/Include/IndustryStandard/RpiFirmware.h | 93 +
Platform/Broadcom/Bcm283x/Include/Library/GpioLib.h | 33 +
Platform/Broadcom/Bcm283x/Include/Protocol/DwUsb.h | 53 +
Platform/Broadcom/Bcm283x/Include/Protocol/ExtendedTextOut.h | 36 +
Platform/Broadcom/Bcm283x/Include/Protocol/PiMmcHost.h | 187 ++
Platform/Broadcom/Bcm283x/Include/Protocol/RaspberryPiFirmware.h | 131 ++
Platform/Broadcom/Bcm283x/Include/Utils.h | 33 +
Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c | 79 +
Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.inf | 39 +
Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.c | 183 ++
Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf | 51 +
Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.c | 831 +++++++++
Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.h | 60 +
Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf | 90 +
Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/AArch64/RaspberryPiHelper.S | 107 ++
Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPi.c | 99 ++
Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiMem.c | 160 ++
Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf | 64 +
Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.c | 104 ++
Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.inf | 46 +
Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c | 222 +++
Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.inf | 43 +
Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec | 63 +
Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc | 636 +++++++
Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf | 450 +++++
Platform/Broadcom/Bcm283x/Readme.md | 263 +++
89 files changed, 21452 insertions(+)
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf b/Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf
new file mode 100644
index 000000000000..db0270270cf9
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf
@@ -0,0 +1,51 @@
+#/** @file
+#
+# ACPI table data and ASL sources required to boot the platform.
+#
+# Copyright (c) 2017, Andrey Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) Microsoft Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = AcpiTables
+ FILE_GUID = 7E374E25-8E01-4FEE-87F2-390C23C606CD
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = AARCH64
+#
+
+[Sources]
+ Platform.h
+ Madt.aslc
+ Fadt.aslc
+ Dbg2.aslc
+ Gtdt.aslc
+ Dsdt.asl
+ Csrt.aslc
+ Spcr.asl
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+
+[FixedPcd]
+ gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress
+
+[BuildOptions]
+ # The default '-mcmodel=small' used with DEBUG produces a GenFw error when compiling CSRT.acpi:
+ # "AARCH64 small code model requires identical ELF and PE/COFF section offsets modulo 4 KB."
+ GCC:DEBUG_*_AARCH64_CC_FLAGS = -mcmodel=tiny
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Csrt.aslc b/Platform/Broadcom/Bcm283x/AcpiTables/Csrt.aslc
new file mode 100644
index 000000000000..926942ec8da3
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Csrt.aslc
@@ -0,0 +1,337 @@
+/** @file
+ *
+ * Core System Resource Table (CSRT)
+ *
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "Platform.h"
+
+#define DMA_MAX_REQ_LINES 32
+
+#pragma pack(push, 1)
+
+//------------------------------------------------------------------------
+// DMA Controller Vendor Data for RPi3
+//------------------------------------------------------------------------
+typedef struct
+{
+ UINT32 Length;
+ UINT32 Type;
+ UINT64 ChannelsBaseAddress;
+ UINT32 ChannelsBaseSize;
+ UINT64 ControllerBaseAddress;
+ UINT32 ControllerBaseSize;
+ UINT32 ChannelCount;
+ UINT32 ControllerInterrupt;
+ UINT32 MinimumRequestLine;
+ UINT32 MaximumRequestLine;
+ BOOLEAN CacheCoherent;
+} DMA_CONTROLLER_VENDOR_DATA;
+
+//------------------------------------------------------------------------
+// DMA Controller on RPi3
+//------------------------------------------------------------------------
+typedef struct
+{
+ EFI_ACPI_5_0_CSRT_RESOURCE_DESCRIPTOR_HEADER DmaControllerHeader;
+ DMA_CONTROLLER_VENDOR_DATA ControllerVendorData;
+} RD_DMA_CONTROLLER;
+
+//------------------------------------------------------------------------
+// DMA Channel Vendor Data for RPi3
+//------------------------------------------------------------------------
+typedef struct
+{
+ UINT32 ChannelNumber;
+ UINT32 ChannelInterrupt;
+ UINT16 IsReservedChannel;
+ UINT16 NoSrcNoDestAddrIncr;
+} DMA_CHANNEL_VENDOR_DATA;
+
+//------------------------------------------------------------------------
+// DMA Channel on RPi3
+//------------------------------------------------------------------------
+typedef struct
+{
+ EFI_ACPI_5_0_CSRT_RESOURCE_DESCRIPTOR_HEADER DmaChannelHeader;
+ DMA_CHANNEL_VENDOR_DATA ChannelVendorData;
+} RD_DMA_CHANNEL;
+
+//------------------------------------------------------------------------
+// DMA Resource Group on RPi3
+//------------------------------------------------------------------------
+
+typedef struct
+{
+ EFI_ACPI_5_0_CSRT_RESOURCE_GROUP_HEADER ResGroupHeader;
+ RD_DMA_CONTROLLER DmaController;
+ RD_DMA_CHANNEL DmaChannels[RPI3_DMA_CHANNEL_COUNT];
+} RG_DMA;
+
+//----------------------------------------------------------------------------
+// CSRT table structure for RPi3 platform - current revision only includes DMA
+//----------------------------------------------------------------------------
+typedef struct
+{
+// Standard ACPI Header
+ EFI_ACPI_DESCRIPTION_HEADER CsrtHeader;
+
+// DMA Resource Group
+ RG_DMA DmaResourceGroup;
+
+} EFI_ACPI_5_0_CSRT_TABLE;
+
+
+
+EFI_ACPI_5_0_CSRT_TABLE Csrt =
+{
+ //------------------------------------------------------------------------
+ // ACPI Table Header
+ //------------------------------------------------------------------------
+ {
+ EFI_ACPI_5_0_CORE_SYSTEM_RESOURCE_TABLE_SIGNATURE, // Signature "CSRT"
+ sizeof(EFI_ACPI_DESCRIPTION_HEADER) + sizeof(RG_DMA), // Length
+ EFI_ACPI_5_0_CSRT_REVISION, // Revision
+ 0x00, // Checksum calculated at runtime.
+ EFI_ACPI_OEM_ID, // OEMID is a 6 bytes long field "BC2836"
+ EFI_ACPI_OEM_TABLE_ID, // OEM table identification(8 bytes long) "RPI3EDK2"
+ EFI_ACPI_OEM_REVISION, // OEM revision number.
+ EFI_ACPI_CREATOR_ID, // ASL compiler vendor ID.
+ EFI_ACPI_CREATOR_REVISION // ASL compiler revision number.
+ },
+
+ //------------------------------------------------------------------------
+ // DMA Resource Group
+ //------------------------------------------------------------------------
+ {
+
+ //------------------------------------------------------------------------
+ // DMA Resource Group Header
+ //------------------------------------------------------------------------
+ {
+ sizeof(RG_DMA), // Resource Group Length
+ EFI_ACPI_VENDOR_ID, // VendorId
+ 0, // SubvendorId
+ EFI_ACPI_CSRT_DEVICE_ID_DMA, // DeviceId 9
+ 0, // SubdeviceId
+ 0, // Revision
+ 0, // Reserved
+ 0 // SharedInfoLength
+ },
+
+
+ //-------------------------------------------------------------------------------
+ // Resource Descriptor - DMA Controller
+ //-------------------------------------------------------------------------------
+ {
+ {
+ sizeof(RD_DMA_CONTROLLER), // Length of this Resource Descriptor
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA, // Type for this resource 3=DMA
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CONTROLLER, // Subtype for this resource 1=DMA Controller
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+0, // ResourceId - 1st DMA controller
+ },
+ {
+ sizeof(DMA_CONTROLLER_VENDOR_DATA), // controller vendor data here
+ 1,
+ 0x3F007000, // Base address for channels
+ RPI3_DMA_CHANNEL_COUNT*0x100, // Base size = Number of channels x 0x100 size for each channel
+ 0x3F007FE0, // Base address for controller
+ 8, // Base size = two registers
+ RPI3_DMA_USED_CHANNEL_COUNT,
+ 0, // cannot use controller interrupt
+ 0, // Minimum Request Line
+ DMA_MAX_REQ_LINES-1, // Maximum Request Line
+ FALSE,
+ },
+ },
+
+ //------------------------------------------------------------------------
+ // Resource Descriptor(s) - DMA Channels 0 to n-1
+ //------------------------------------------------------------------------
+ {
+
+ // channel 0
+ {
+ {
+ sizeof(RD_DMA_CHANNEL), // Length of this Resource Descriptor
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA, // Type for this resource 3=DMA
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL, // Subtype for this resource 0=DMA Channel
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+1, // ResourceId
+ },
+ {
+ 0, // channel vendor data here
+ 0x30, // 16+32 dma_int[0]
+ 0,
+ 0
+ },
+ },
+
+ // channel 1 reserved
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+2, // ResourceId
+ },
+ {
+ 1, // channel vendor data here
+ 0x31, // 17+32 dma_int[1]
+ 1,
+ 0
+ },
+ },
+
+ // channel 2 - VC4 use only
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+3, // ResourceId
+ },
+ {
+ 2, // channel vendor data here
+ 0x32, // 18+32 dma_int[2]
+ 1,
+ 0
+ },
+ },
+
+ // channel 3 - VC4 use only
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+4,
+ },
+ {
+ 3, // channel vendor data here
+ 0x33, // 19+32 dma_int[3]
+ 1,
+ 0
+ },
+ },
+
+ // channel 4
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+5,
+ },
+ {
+ 4, // channel vendor data here
+ 0x34, // 20+32 dma_int[4]
+ 0,
+ 1 // SD host controller candidate
+ },
+ },
+
+ // channel 5
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+6,
+ },
+ {
+ 5, // channel vendor data here
+ 0x35, // 21+32 dma_int[5]
+ 0,
+ 0
+ },
+ },
+
+ // channel 6 is reserved
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+7,
+ },
+ {
+ 6, // channel vendor data here
+ 0x36, // 22+32 dma_int[6]
+ 1,
+ 0
+ },
+ },
+
+ // channel 7 is reserved
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+8,
+ },
+ {
+ 7, // channel vendor data here
+ 0x37, // 23+32 dma_int[7]
+ 1,
+ 0
+ },
+ },
+
+ // channel 8
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+9,
+ },
+ {
+ 8, // channel vendor data here
+ 0x38, // 24+32 dma_int[8]
+ 0,
+ 0
+ },
+ },
+
+ // channel 9
+ {
+ {
+ sizeof(RD_DMA_CHANNEL),
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA,
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL,
+ EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP+10,
+ },
+ {
+ 9, // channel vendor data here
+ 0x39, // 25+32 dma_int[9]
+ 0,
+ 0
+ },
+ }
+
+ } // end DMA Channels 0 to 14
+
+ } // end DMA Resource group
+};
+
+#pragma pack(pop)
+
+VOID* ReferenceAcpiTable(VOID)
+{
+//
+// Reference the table being generated to prevent the optimizer from removing the
+// data structure from the exeutable
+//
+ return (VOID*)&Csrt;
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Dbg2.aslc b/Platform/Broadcom/Bcm283x/AcpiTables/Dbg2.aslc
new file mode 100644
index 000000000000..b728a5f00cfb
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Dbg2.aslc
@@ -0,0 +1,32 @@
+/** @file
+ *
+ * Debug Port Table (DBG2)
+ *
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+char DBG2[92] = {
+ 0x44, 0x42, 0x47, 0x32, 0x5C, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x4D, 0x53, 0x46, 0x54, 0x20, 0x20, 0x45, 0x44, 0x4B, 0x32,
+ 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53,
+ 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x2C, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x01, 0x0A, 0x00,
+ 0x26, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x80, 0x10, 0x00,
+ 0x00, 0x00, 0x16, 0x00, 0x22, 0x00, 0x00, 0x20, 0x00, 0x10,
+ 0x00, 0x50, 0x21, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00,
+ 0x00, 0x00, '\\', '_', 'S', 'B', '.', 'U', 'R', 'T',
+ 'M', 0x00,
+};
+
+void * ReferenceAcpiTable(void) {
+ return (void *) &DBG2;
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl b/Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl
new file mode 100644
index 000000000000..69897cb921f7
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl
@@ -0,0 +1,523 @@
+/** @file
+ *
+ * Differentiated System Definition Table (DSDT)
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#define BCM_ALT0 0x4
+#define BCM_ALT1 0x5
+#define BCM_ALT2 0x6
+#define BCM_ALT3 0x7
+#define BCM_ALT4 0x3
+#define BCM_ALT5 0x2
+
+DefinitionBlock ("Dsdt.aml", "DSDT", 5, "MSFT", "EDK2", 2)
+{
+ Scope (\_SB_)
+ {
+ include("Sdhc.asl")
+ include("Pep.asl")
+
+ //
+ // Description: This is a Processor Device
+ //
+
+ Device (CPU0)
+ {
+ Name (_HID, "ACPI0007")
+ Name (_UID, 0x0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ }
+
+ //
+ // Description: This is a Processor Device
+ //
+
+ Device (CPU1)
+ {
+ Name (_HID, "ACPI0007")
+ Name (_UID, 0x1)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ }
+
+ //
+ // Description: This is a Processor Device
+ //
+
+ Device (CPU2)
+ {
+ Name (_HID, "ACPI0007")
+ Name (_UID, 0x2)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ }
+
+ //
+ // Description: This is a Processor Device
+ //
+
+ Device (CPU3)
+ {
+ Name (_HID, "ACPI0007")
+ Name (_UID, 0x3)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ }
+
+ //
+ // Description: DWC OTG Controller
+ //
+
+ Device (USB0)
+ {
+ Name (_HID, "BCM2848")
+ Name (_CID, Package() { "DWC_OTG", "DWC2_OTG"})
+ Name (_UID, 0x0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F980000, 0x10000, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x29 }
+ })
+ Return(RBUF)
+ }
+ }
+
+ //
+ // Description: Video Core 4 GPU
+ //
+
+ Device (GPU0)
+ {
+ Name (_HID, "BCM2850")
+ Name (_CID, "VC4")
+ Name (_UID, 0x0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ // Memory and interrupt for the GPU
+ MEMORY32FIXED(ReadWrite, 0x3FC00000, 0x1000, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x2A }
+
+ // HVS - Hardware Video Scalar
+ MEMORY32FIXED(ReadWrite, 0x3F400000, 0x6000, )
+ // The HVS interrupt is reserved by the VPU
+ // Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x41 }
+
+ // PixelValve0 - DSI0 or DPI
+ // MEMORY32FIXED(ReadWrite, 0x3F206000, 0x100, )
+ // Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x4D }
+
+ // PixelValve1 - DS1 or SMI
+ // MEMORY32FIXED(ReadWrite, 0x73F207000, 0x100, )
+ // Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x4E }
+
+ // PixelValve2 - HDMI output - connected to HVS display FIFO 1
+ MEMORY32FIXED(ReadWrite, 0x3F807000, 0x100, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x4A }
+
+ // HDMI registers
+ MEMORY32FIXED(ReadWrite, 0x3F902000, 0x600, ) // HDMI registers
+ MEMORY32FIXED(ReadWrite, 0x3F808000, 0x100, ) // HD registers
+ // hdmi_int[0]
+ // Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x48 }
+ // hdmi_int[1]
+ // Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x49 }
+
+ // HDMI DDC connection
+ I2CSerialBus(0x50,, 100000,, "\\_SB.I2C2",,,,) // EDID
+ I2CSerialBus(0x30,, 100000,, "\\_SB.I2C2",,,,) // E-DDC Segment Pointer
+ })
+ Return(RBUF)
+ }
+
+ // GPU Power Management Component Data
+ // Reference : https://github.com/Microsoft/graphics-driver-samples/wiki/Install-Driver-in-a-Windows-VM
+ Method(PMCD, 0, Serialized) {
+
+ Name(RBUF, Package() {
+ 1, // Version
+ 1, // Number of graphics power components
+
+ Package() { // Power components package
+
+ Package() { // GPU component package
+ 0, // Component Index
+ 0, // DXGK_POWER_COMPONENT_MAPPING.ComponentType (0 = DXGK_POWER_COMPONENT_ENGINE)
+ 0, // DXGK_POWER_COMPONENT_MAPPING.NodeIndex
+
+ Buffer() { // DXGK_POWER_RUNTIME_COMPONENT.ComponentGuid
+ // 9B2D1E26-1575-4747-8FC0-B9EB4BAA2D2B
+ 0x26, 0x1E, 0x2D, 0x9B, 0x75, 0x15, 0x47, 0x47,
+ 0x8f, 0xc0, 0xb9, 0xeb, 0x4b, 0xaa, 0x2d, 0x2b
+ },
+
+ "VC4_Engine_00",// DXGK_POWER_RUNTIME_COMPONENT.ComponentName
+ 2, // DXGK_POWER_RUNTIME_COMPONENT.StateCount
+
+ Package() { // DXGK_POWER_RUNTIME_COMPONENT.States[] package
+
+ Package() { // F0
+ 0, // DXGK_POWER_RUNTIME_STATE.TransitionLatency
+ 0, // DXGK_POWER_RUNTIME_STATE.ResidencyRequirement
+ 1210000, // DXGK_POWER_RUNTIME_STATE.NominalPower (microwatt)
+ },
+
+ Package() { // F1 - Placeholder
+ 10000, // DXGK_POWER_RUNTIME_STATE.TransitionLatency
+ 10000, // DXGK_POWER_RUNTIME_STATE.ResidencyRequirement
+ 4, // DXGK_POWER_RUNTIME_STATE.NominalPower
+ },
+ }
+ }
+ }
+ })
+ Return(RBUF)
+ }
+ }
+
+ //
+ // Description: PiQ Mailbox Driver
+ //
+
+ Device (RPIQ)
+ {
+ Name (_HID, "BCM2849")
+ Name (_CID, "RPIQ")
+ Name (_UID, 0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ Memory32Fixed (ReadWrite, 0x3F00B880, 0x00000024, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x61 }
+ })
+ Return (RBUF)
+ }
+ }
+
+ //
+ // Description: VCHIQ Driver
+ //
+
+ Device (VCIQ)
+ {
+ Name (_HID, "BCM2835")
+ Name (_CID, "VCIQ")
+ Name (_UID, 0)
+ Name (_DEP, Package() { \_SB.RPIQ })
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ Memory32Fixed (ReadWrite, 0x3F00B840, 0x00000010, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x62 }
+ })
+ Return (RBUF)
+ }
+ }
+
+ //
+ // Description: VC Shared Memory Driver
+ //
+
+ Device (VCSM)
+ {
+ Name (_HID, "BCM2856")
+ Name (_CID, "VCSM")
+ Name (_UID, 0)
+ Name (_DEP, Package() { \_SB.VCIQ })
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ }
+
+ //
+ // Description: GPIO
+ //
+ Device (GPI0)
+ {
+ Name (_HID, "BCM2845")
+ Name (_CID, "BCMGPIO")
+ Name (_UID, 0x0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F200000, 0xB4, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) { 0x51 }
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) { 0x53 }
+ })
+ Return(RBUF)
+ }
+ }
+
+ //
+ // Description: I2C
+ //
+
+ Device (I2C1)
+ {
+ Name (_HID, "BCM2841")
+ Name (_CID, "BCMI2C")
+ Name (_UID, 0x1)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized)
+ {
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed(ReadWrite, 0x3F804000, 0x20)
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) {0x55}
+ //
+ // MsftFunctionConfig is encoded as the VendorLong.
+ //
+ // MsftFunctionConfig(Exclusive, PullUp, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer, ) {2, 3}
+ //
+ VendorLong () // Length = 0x31
+ {
+ /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
+ /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
+ /* 0010 */ 0x2F, 0x8D, 0x1D, 0x00, 0x01, 0x10, 0x00, 0x01, // /.......
+ /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x16, 0x00, 0x20, // .......
+ /* 0020 */ 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x00, 0x5C, // .......\
+ /* 0028 */ 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, // _SB.GPI0
+ /* 0030 */ 0x00 // .
+ }
+
+ })
+ Return(RBUF)
+ }
+ }
+
+ //
+ // I2C2 is the HDMI DDC connection
+ //
+
+ Device (I2C2)
+ {
+ Name (_HID, "BCM2841")
+ Name (_CID, "BCMI2C")
+ Name (_UID, 0x2)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized)
+ {
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed(ReadWrite, 0x3F805000, 0x20)
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) {0x55}
+ })
+ Return(RBUF)
+ }
+ }
+
+ //
+ // Description: SPI
+ //
+
+ Device (SPI0)
+ {
+ Name (_HID, "BCM2838")
+ Name (_CID, "BCMSPI0")
+ Name (_UID, 0x0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F204000, 0x20, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) {0x56}
+
+ //
+ // MsftFunctionConfig is encoded as the VendorLong.
+ //
+ // MsftFunctionConfig(Exclusive, PullDown, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer, ) {9, 10, 11} // MISO, MOSI, SCLK
+ VendorLong () // Length = 0x33
+ {
+ /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
+ /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
+ /* 0010 */ 0x2F, 0x8D, 0x1F, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
+ /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x18, 0x00, 0x22, // ......."
+ /* 0020 */ 0x00, 0x00, 0x00, 0x09, 0x00, 0x0A, 0x00, 0x0B, // ........
+ /* 0028 */ 0x00, 0x5C, 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, // .\_SB.GP
+ /* 0030 */ 0x49, 0x30, 0x00 // I0.
+ }
+
+ //
+ // MsftFunctionConfig is encoded as the VendorLong.
+ //
+ // MsftFunctionConfig(Exclusive, PullUp, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer, ) {8} // CE0
+ VendorLong () // Length = 0x2F
+ {
+ /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
+ /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
+ /* 0010 */ 0x2F, 0x8D, 0x1B, 0x00, 0x01, 0x10, 0x00, 0x01, // /.......
+ /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x1E, // ........
+ /* 0020 */ 0x00, 0x00, 0x00, 0x08, 0x00, 0x5C, 0x5F, 0x53, // .....\_S
+ /* 0028 */ 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, 0x00 // B.GPI0.
+ }
+
+ //
+ // MsftFunctionConfig is encoded as the VendorLong.
+ //
+ // MsftFunctionConfig(Exclusive, PullUp, BCM_ALT0, "\\_SB.GPI0", 0, ResourceConsumer, ) {7} // CE1
+ VendorLong () // Length = 0x2F
+ {
+ /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
+ /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
+ /* 0010 */ 0x2F, 0x8D, 0x1B, 0x00, 0x01, 0x10, 0x00, 0x01, // /.......
+ /* 0018 */ 0x04, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x1E, // ........
+ /* 0020 */ 0x00, 0x00, 0x00, 0x07, 0x00, 0x5C, 0x5F, 0x53, // .....\_S
+ /* 0028 */ 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, 0x00 // B.GPI0.
+ }
+ })
+ Return(RBUF)
+ }
+ }
+
+ Device (SPI1)
+ {
+ Name (_HID, "BCM2839")
+ Name (_CID, "BCMAUXSPI")
+ Name (_UID, 0x1)
+ Name (_DEP, Package() { \_SB.RPIQ })
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F215080, 0x40,)
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared,) {0x3D}
+
+ //
+ // MsftFunctionConfig is encoded as the VendorLong.
+ //
+ // MsftFunctionConfig(Exclusive, PullDown, BCM_ALT4, "\\_SB.GPI0", 0, ResourceConsumer, ) {19, 20, 21} // MISO, MOSI, SCLK
+ VendorLong () // Length = 0x33
+ {
+ /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
+ /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
+ /* 0010 */ 0x2F, 0x8D, 0x1F, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
+ /* 0018 */ 0x03, 0x00, 0x12, 0x00, 0x00, 0x18, 0x00, 0x22, // ......."
+ /* 0020 */ 0x00, 0x00, 0x00, 0x13, 0x00, 0x14, 0x00, 0x15, // ........
+ /* 0028 */ 0x00, 0x5C, 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, // .\_SB.GP
+ /* 0030 */ 0x49, 0x30, 0x00 // I0.
+ }
+
+ //
+ // MsftFunctionConfig is encoded as the VendorLong.
+ //
+ // MsftFunctionConfig(Exclusive, PullDown, BCM_ALT4, "\\_SB.GPI0", 0, ResourceConsumer, ) {16} // CE2
+ VendorLong () // Length = 0x2F
+ {
+ /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
+ /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
+ /* 0010 */ 0x2F, 0x8D, 0x1B, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
+ /* 0018 */ 0x03, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x1E, // ........
+ /* 0020 */ 0x00, 0x00, 0x00, 0x10, 0x00, 0x5C, 0x5F, 0x53, // .....\_S
+ /* 0028 */ 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, 0x00 // B.GPI0.
+ }
+ })
+ Return(RBUF)
+ }
+ }
+
+ // SPI2 has no pins on GPIO header
+ // Device (SPI2)
+ // {
+ // Name (_HID, "BCM2839")
+ // Name (_CID, "BCMAUXSPI")
+ // Name (_UID, 0x2)
+ // Name (_DEP, Package() { \_SB.RPIQ })
+ // Method (_STA)
+ // {
+ // Return(0xf) // Disabled
+ // }
+ // Method (_CRS, 0x0, Serialized) {
+ // Name (RBUF, ResourceTemplate () {
+ // MEMORY32FIXED(ReadWrite, 0x3F2150C0, 0x40,)
+ // Interrupt(ResourceConsumer, Level, ActiveHigh, Shared,) {0x3D}
+ // })
+ // Return(RBUF)
+ // }
+ // }
+
+ //
+ // Description: PWM Driver
+ //
+
+ Device (PWM0)
+ {
+ Name (_HID, "BCM2844")
+ Name (_CID, "BCM2844")
+ Name (_UID, 0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ // DMA channel 11 control
+ Memory32Fixed (ReadWrite, 0x3F007B00, 0x00000100, )
+ // PWM control
+ Memory32Fixed (ReadWrite, 0x3F20C000, 0x00000028, )
+ // PWM control bus
+ Memory32Fixed (ReadWrite, 0x7E20C000, 0x00000028, )
+ // PWM control uncached
+ Memory32Fixed (ReadWrite, 0xFF20C000, 0x00000028, )
+ // PWM clock control
+ Memory32Fixed (ReadWrite, 0x3F1010A0, 0x00000008, )
+ // Interrupt DMA channel 11
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x3B }
+ // DMA channel 11, DREQ 5 for PWM
+ FixedDMA(5, 11, Width32Bit, )
+ })
+ Return (RBUF)
+ }
+ }
+
+ include("Uart.asl")
+ include("Rhpx.asl")
+ }
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Fadt.aslc b/Platform/Broadcom/Bcm283x/AcpiTables/Fadt.aslc
new file mode 100644
index 000000000000..493a888d3699
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Fadt.aslc
@@ -0,0 +1,50 @@
+/** @file
+ *
+ * Fixed ACPI Description Table (FADT)
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+char FACP[268] = {
+ 0x46, 0x41, 0x43, 0x50, 0x0C, 0x01, 0x00, 0x00, 0x05, 0x00, /* 0 */
+ 0x42, 0x43, 0x32, 0x38, 0x33, 0x36, 0x45, 0x44, 0x4B, 0x32, /* 10 */
+ 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53, /* 20 */
+ 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, /* 40 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 50 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
+ 0x00, 0x04, 0x00, 0x00, 0x00, 0xE3, 0x00, 0x00, 0x00, 0x00, /* 90 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, /* 100 */
+ 0x00, 0x00, 0x21, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* 110 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, /* 120 */
+ 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 130 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 140 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 150 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 160 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 170 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 180 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 190 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 200 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 210 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 220 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 230 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 240 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 250 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 /* 268 */
+};
+
+void * ReferenceAcpiTable(void) {
+ return (void *) &FACP;
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Gtdt.aslc b/Platform/Broadcom/Bcm283x/AcpiTables/Gtdt.aslc
new file mode 100644
index 000000000000..764cc6c09fe7
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Gtdt.aslc
@@ -0,0 +1,31 @@
+/** @file
+ *
+ * Generic Timer Description Table (GTDT)
+ * Automatically generated by AutoAcpi
+ *
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+char GTDT[80] = {
+ 0x47, 0x54, 0x44, 0x54, 0x50, 0x00, 0x00, 0x00, 0x01, 0x00,
+ 0x4D, 0x53, 0x46, 0x54, 0x20, 0x20, 0x45, 0x44, 0x4B, 0x32,
+ 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53,
+ 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x40,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+void * ReferenceAcpiTable(void) {
+ return (void *) >DT;
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Madt.aslc b/Platform/Broadcom/Bcm283x/AcpiTables/Madt.aslc
new file mode 100644
index 000000000000..96f3ee469324
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Madt.aslc
@@ -0,0 +1,60 @@
+/** @file
+ *
+ * Multiple APIC Description Table (MADT)
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+/*
+ * Even though the BCM2836 doesn't contain a GIC, these
+ * GICC definitions enable multi-core support (with PSCI).
+ *
+ * Mind the signatures in the header, they must be kept.
+ */
+char APIC[] = {
+ 0x41, 0x50, 0x49, 0x43, 0x6c, 0x01, 0x00, 0x00, 0x03, 0xaf, 0x42, 0x43,
+ 0x32, 0x38, 0x33, 0x36, 0x45, 0x44, 0x4b, 0x32, 0x20, 0x20, 0x20, 0x20,
+ 0x01, 0x00, 0x00, 0x00, 0x4d, 0x53, 0x46, 0x54, 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x50, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x00, 0x00, 0x0b, 0x50, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+ 0x0b, 0x50, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x0b, 0x50, 0x00, 0x00,
+ 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x00, 0x00
+};
+
+void * ReferenceAcpiTable(void) {
+ return (void *) &APIC;
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl b/Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl
new file mode 100644
index 000000000000..c0e07c6eaf42
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl
@@ -0,0 +1,92 @@
+/** @file
+ *
+ * Platform Extension Plugin (PEP).
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+Device(PEPD)
+{
+ //
+ // RPI3 PEP virtual device.
+ //
+ Name(_HID, "BCM2854") // note: since pep on rpi3 is virtual device,
+ Name(_CID, "BCM2854") // its device id needs to be generated by Microsoft
+ Name(_UID, 0x0)
+ Name(_CRS, ResourceTemplate () {
+ // No hardware resources for PEP driver are needed.
+ })
+
+ //
+ // Processor info. PEP proprietary method to return
+ // PEP_PROCESSOR_TABLE_PLAT structure.
+ //
+ // See Pep.h and Pep.c.
+ //
+ Name(_GPI, Buffer() {
+ 0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x5C,0x00,0x5F,0x00,0x53,
+ 0x00,0x42,0x00,0x2E,0x00,0x43,0x00,0x50,0x00,0x55,0x00,0x30,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ })
+
+ //
+ // Coordinated state info. PEP proprietary method to return
+ // PEP_COORDINATED_STATE_TABLE_PLAT structure.
+ //
+ // See Pep.h and Pep.c.
+ //
+ Name(_GCI, Buffer() {
+ 0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x01,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
+ 0x00,0x00,0x00,0x01,0x00,0x00,0x00
+ })
+
+ //
+ // Device info. PEP proprietary method to return
+ // PEP_DEVICE_TABLE_PLAT structure.
+ //
+ // See Pep.h and Pep.c.
+ //
+
+ Name(_GDI, Buffer() {
+ 0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x5C,0x00,0x5F,0x00,0x53,
+ 0x00,0x42,0x00,0x2E,0x00,0x49,0x00,0x32,0x00,0x43,0x00,0x30,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x09,
+ 0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ })
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Pep.c b/Platform/Broadcom/Bcm283x/AcpiTables/Pep.c
new file mode 100644
index 000000000000..de457daaa547
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Pep.c
@@ -0,0 +1,84 @@
+/** @file
+ *
+ * PEP device tables
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "Pep.h"
+
+PEP_PROCESSOR_TABLE_PLAT RPI3Processors = {
+ 1, //Version
+ 1, //NumberProcessors
+ { //ProcessorInfo
+ { //[0]
+ L"\\_SB.CPU0", //DevicePath , wchar_t[16]
+ 0, //FeedbackCounterCount
+ 0x00000000, //Flags
+ 0, //NumberIdleStates
+ 0, //NumberPerfStates
+ { //IdleInfo
+ },
+ { // perfinfo
+ }
+ }
+ }
+};
+
+PEP_COORDINATED_STATE_TABLE_PLAT RPI3CoordinatedStates = {
+ 1, //Version
+ 1, //CoordinatedStateCount
+ { //CordinatedStates[]
+ { //[0]
+ { // DependencyInfo
+ { //[0]
+ 1, //ExpectedState
+ 0, //TargetProcessor
+ 0x0 | 0x2 | 0x4, //LooseDependency = FALSE, InitialState = TRUE, DependentState = TRUE
+ }
+ },
+ SOC_STATE_TYPE, //StateType
+ 0x1, //Flags
+ 0, //Latency
+ 0, //BreakEvenDuration
+ 1, //DependencyCount
+ 1, //MaximumDependencySize
+ }
+ }
+};
+
+PEP_DEVICE_TABLE_PLAT RPI3Devices = {
+ 1, //Version
+ 1, //NumberDevices
+ { //DeviceInfo
+ { //[1]
+ L"\\_SB.I2C0", //DevicePath , wchar_t[16]
+ 0x1 | (1 << 3), //DStateSupportMask (D0 and D3)
+ 1, //NumberCompoenents
+ { //DStateRequirement
+ { //[0]
+ PowerDeviceD3 //DState
+ }
+ },
+ { // FStateRequirement
+ { //[0]
+ { //FState
+ { //[0]
+ 0
+ }
+ }
+ }
+ }
+ }
+ }
+};
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Pep.h b/Platform/Broadcom/Bcm283x/AcpiTables/Pep.h
new file mode 100644
index 000000000000..16d8c460832e
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Pep.h
@@ -0,0 +1,126 @@
+/** @file
+ *
+ * PEP device defines
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+/*
+ * Note: Not everything is here. At least SOC_STATE_TYPE is missing.
+ */
+
+#ifndef _RPI3PEP_H_INCLUDED_
+#define _RPI3PEP_H_INCLUDED_
+
+#include <IndustryStandard/Acpi50.h>
+
+#define PEP_MAX_DEPENDENCIES_PER_STATE 16
+#define MAX_PROCESSOR_PATH_LENGTH 16
+#define MAX_DEVICE_PATH_LENGTH 32
+#define MAX_COMPONENT_COUNT 8
+#define P_NUMBER_PROCESSORS 1
+#define P_NUMBER_IDLE_STATES 1
+#define P_NUMBER_PERF_STATES 0
+#define P_NUMBER_DEVICES 1
+#define P_NUMBER_COORDINATED_STATS 1
+
+typedef struct _PEP_PROCESSOR_IDLE_STATE_INFO {
+ UINT32 Ulong;
+ UINT32 Latency;
+ UINT32 BreakEvenDuration;
+} PEP_PROCESSOR_IDLE_STATE_INFO, *PEP_PROCESSOR_IDLE_STATE_INFO;
+
+typedef struct _PEP_PROCESSOR_IDLE_INFO_PLAT {
+ //
+ // Processor idle states.
+ //
+ PEP_PROCESSOR_IDLE_STATE_INFO IdleStates[P_NUMBER_IDLE_STATES];
+} PEP_PROCESSOR_IDLE_INFO_PLAT, *PPEP_PROCESSOR_IDLE_INFO_PLAT;
+
+typedef struct COORDINATED_DEPENDENCY_INFO {
+ UINT32 ExpectedState;
+ UINT32 TargetProcessor;
+ UINT32 Ulong;
+} COORDINATED_DEPENDENCY_INFO, *PCOORDINATED_DEPENDENCY_INFO;
+
+typedef struct {
+ COORDINATED_DEPENDENCY_INFO DependencyInfo[PEP_MAX_DEPENDENCIES_PER_STATE];
+ UINT32 StateType;
+ UINT32 Ulong;
+ UINT32 Latency;
+ UINT32 BreakEvenDuration;
+ UINT32 DependencyCount;
+ UINT32 MaximumDependencySize;
+} COORDINATED_STATE_INFO;
+
+typedef struct {
+ UINT32 Unused;
+} PEP_PROCESSOR_PERF_INFO;
+
+typedef struct {
+ UINT32 FState[MAX_COMPONENT_COUNT];
+} COORDINATED_FSTATE_REQUIREMENT;
+
+typedef struct {
+ UINT32 DState;
+} COORDINATED_DSTATE_REQUIREMENT;
+
+//
+// Top level device table
+// *N.B. The exact length of the structure is determined by the NumberIdleStates/NumberPerfStates variables.
+//
+
+typedef struct _PEP_PROCESSOR_INFO_PLAT {
+ WCHAR DevicePath[MAX_PROCESSOR_PATH_LENGTH]; // Null-terminated ACPI name
+ ULONG FeedbackCounterCount;
+ ULONG Flags;
+
+ //
+ // We are putting the idle/perf state count here (instead
+ // of the PEP_PROCESSOR_xxx_INFO structure for the ease of parsing.
+ //
+ ULONG NumberIdleStates;
+ ULONG NumberPerfStates;
+
+ PEP_PROCESSOR_IDLE_INFO_PLAT IdleInfo;
+ PEP_PROCESSOR_PERF_INFO PerfInfo;
+} PEP_PROCESSOR_INFO_PLAT, *PPEP_PROCESSOR_INFO_PLAT;
+
+typedef struct _PEP_PROCESSOR_TABLE_PLAT {
+ UINT32 Version;
+ UINT32 NumberProcessors;
+ PEP_PROCESSOR_INFO_PLAT ProcessorInfo[P_NUMBER_PROCESSORS];
+} PEP_PROCESSOR_TABLE_PLAT;
+
+typedef struct _PEP_COORDINATED_STATE_TABLE_PLAT {
+ ULONG Version;
+ ULONG CoordinatedStateCount;
+ COORDINATED_STATE_INFO CoordinatedStates[P_NUMBER_COORDINATED_STATS];
+} PEP_COORDINATED_STATE_TABLE_PLAT, *PPEP_COORDINATED_STATE_TABLE_PLAT;
+
+typedef struct _PEP_DEVICE_INFO_PLAT {
+ WCHAR DevicePath[MAX_DEVICE_PATH_LENGTH]; // Null-terminated ACPI name
+ ULONG DStateSupportMask;
+ ULONG NumberComponents;
+
+ COORDINATED_DSTATE_REQUIREMENT DStateRequirement[P_NUMBER_COORDINATED_STATS];
+ COORDINATED_FSTATE_REQUIREMENT FStateRequirement[P_NUMBER_COORDINATED_STATS];
+} PEP_DEVICE_INFO_PLAT, *PPEP_DEVICE_INFO_PLAT;
+
+typedef struct _PEP_DEVICE_TABLE_PLAT {
+ ULONG Version;
+ ULONG NumberDevices;
+ PEP_DEVICE_INFO_PLAT DeviceInfo[P_NUMBER_DEVICES];
+} PEP_DEVICE_TABLE_PLAT, *PPEP_DEVICE_TABLE_PLAT;
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Platform.h b/Platform/Broadcom/Bcm283x/AcpiTables/Platform.h
new file mode 100644
index 000000000000..826182698fd0
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Platform.h
@@ -0,0 +1,82 @@
+/** @file
+ *
+ * RPi3 Platform specific defines for constructing ACPI tables
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef _Platform_H_INCLUDED_
+#define _Platform_H_INCLUDED_
+
+#include <IndustryStandard/Acpi50.h>
+
+#define EFI_ACPI_OEM_ID {'M','C','R','S','F','T'} // OEMID 6 bytes long
+#define EFI_ACPI_OEM_TABLE_ID SIGNATURE_64('R','P','I','3','E','D','K','2') // OEM table id 8 bytes long
+#define EFI_ACPI_OEM_REVISION 0x02000820
+#define EFI_ACPI_CREATOR_ID SIGNATURE_32('R','P','I','3')
+#define EFI_ACPI_CREATOR_REVISION 0x00000097
+
+#define EFI_ACPI_VENDOR_ID SIGNATURE_32('M','S','F','T')
+#define EFI_ACPI_CSRT_REVISION 0x00000005
+#define EFI_ACPI_CSRT_DEVICE_ID_DMA 0x00000009 // fixed id
+#define EFI_ACPI_CSRT_RESOURCE_ID_IN_DMA_GRP 0x0 // count up from 0
+
+#define RPI3_DMA_CHANNEL_COUNT 10 // all 10 DMA channels are listed, including the reserved ones
+#define RPI3_DMA_USED_CHANNEL_COUNT 5 // use 5 DMA channels
+
+#define EFI_ACPI_5_0_CSRT_REVISION 0x00000000
+
+typedef enum
+{
+ EFI_ACPI_CSRT_RESOURCE_TYPE_RESERVED, // 0
+ EFI_ACPI_CSRT_RESOURCE_TYPE_INTERRUPT, // 1
+ EFI_ACPI_CSRT_RESOURCE_TYPE_TIMER, // 2
+ EFI_ACPI_CSRT_RESOURCE_TYPE_DMA, // 3
+ EFI_ACPI_CSRT_RESOURCE_TYPE_CACHE, // 4
+}
+CSRT_RESOURCE_TYPE;
+
+typedef enum
+{
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CHANNEL, // 0
+ EFI_ACPI_CSRT_RESOURCE_SUBTYPE_DMA_CONTROLLER // 1
+}
+CSRT_DMA_SUBTYPE;
+
+//------------------------------------------------------------------------
+// CSRT Resource Group header 24 bytes long
+//------------------------------------------------------------------------
+typedef struct
+{
+ UINT32 Length; // Length
+ UINT32 VendorID; // 4 bytes
+ UINT32 SubVendorId; // 4 bytes
+ UINT16 DeviceId; // 2 bytes
+ UINT16 SubdeviceId; // 2 bytes
+ UINT16 Revision; // 2 bytes
+ UINT16 Reserved; // 2 bytes
+ UINT32 SharedInfoLength; // 4 bytes
+} EFI_ACPI_5_0_CSRT_RESOURCE_GROUP_HEADER;
+
+//------------------------------------------------------------------------
+// CSRT Resource Descriptor 12 bytes total
+//------------------------------------------------------------------------
+typedef struct
+{
+ UINT32 Length; // 4 bytes
+ UINT16 ResourceType; // 2 bytes
+ UINT16 ResourceSubType; // 2 bytes
+ UINT32 UID; // 4 bytes
+} EFI_ACPI_5_0_CSRT_RESOURCE_DESCRIPTOR_HEADER;
+
+#endif // of _Platform_H_INCLUDED_
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl b/Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl
new file mode 100644
index 000000000000..b197aa53fed4
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl
@@ -0,0 +1,201 @@
+/** @file
+ *
+ * [DSDT] RHProxy device to enable WinRT API (RHPX)
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+Device(RHPX)
+{
+ Name(_HID, "MSFT8000")
+ Name(_CID, "MSFT8000")
+ Name(_UID, 1)
+
+ Name(_CRS, ResourceTemplate()
+ {
+ // Index 0
+ SPISerialBus( // SCKL - GPIO 11 - Pin 23
+ // MOSI - GPIO 10 - Pin 19
+ // MISO - GPIO 9 - Pin 21
+ // CE0 - GPIO 8 - Pin 24
+ 0, // Device selection (CE0)
+ PolarityLow, // Device selection polarity
+ FourWireMode, // wiremode
+ 8, // databit len
+ ControllerInitiated, // slave mode
+ 4000000, // connection speed
+ ClockPolarityLow, // clock polarity
+ ClockPhaseFirst, // clock phase
+ "\\_SB.SPI0", // ResourceSource: SPI bus controller name
+ 0, // ResourceSourceIndex
+ // Resource usage
+ // DescriptorName: creates name for offset of resource descriptor
+ ) // Vendor Data
+
+ // Index 1
+ SPISerialBus( // SCKL - GPIO 11 - Pin 23
+ // MOSI - GPIO 10 - Pin 19
+ // MISO - GPIO 9 - Pin 21
+ // CE1 - GPIO 7 - Pin 26
+ 1, // Device selection (CE1)
+ PolarityLow, // Device selection polarity
+ FourWireMode, // wiremode
+ 8, // databit len
+ ControllerInitiated, // slave mode
+ 4000000, // connection speed
+ ClockPolarityLow, // clock polarity
+ ClockPhaseFirst, // clock phase
+ "\\_SB.SPI0", // ResourceSource: SPI bus controller name
+ 0, // ResourceSourceIndex
+ // Resource usage
+ // DescriptorName: creates name for offset of resource descriptor
+ ) // Vendor Data
+
+ // Index 2
+ I2CSerialBus( // Pin 3 (GPIO2, SDA1), 5 (GPIO3, SCL1)
+ 0xFFFF, // SlaveAddress: placeholder
+ , // SlaveMode: default to ControllerInitiated
+ 0, // ConnectionSpeed: placeholder
+ , // Addressing Mode: default to 7 bit
+ "\\_SB.I2C1", // ResourceSource: I2C bus controller name
+ ,
+ ,
+ , // Descriptor Name: creates name for offset of resource descriptor
+ ) // VendorData
+
+ // Index 3
+ SPISerialBus( // SPI1_SCLK - GPIO21
+ // SPI1_MOSI - GPIO20
+ // SPI1_MISO - GPIO19
+ // SPI1_CE2_N - GPIO16
+ 2, // Device selection (CE2)
+ PolarityLow, // Device selection polarity
+ FourWireMode, // wiremode
+ 8, // databit len
+ ControllerInitiated, // slave mode
+ 4000000, // connection speed
+ ClockPolarityLow, // clock polarity
+ ClockPhaseFirst, // clock phase
+ "\\_SB.SPI1", // ResourceSource: SPI bus controller name
+ 0, // ResourceSourceIndex
+ // Resource usage
+ // DescriptorName: creates name for offset of resource descriptor
+ ) // Vendor Data
+
+ // GPIO 2
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 2 }
+ GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 2 }
+ // GPIO 3
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 3 }
+ GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 3 }
+ // GPIO 4
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 4 }
+ GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 4 }
+ // GPIO 5
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 5 }
+ GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 5 }
+ // GPIO 6
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 6 }
+ GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 6 }
+ // GPIO 7
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 7 }
+ GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 7 }
+ // GPIO 8
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 8 }
+ GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.GPI0",) { 8 }
+ // GPIO 9
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 9 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 9 }
+ // GPIO 10
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 10 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 10 }
+ // GPIO 11
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 11 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 11 }
+ // GPIO 12
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 12 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 12 }
+ // GPIO 13
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 13 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 13 }
+ // NTRAID#MSFT-7141401-2016/04/7-jordanrh - disable UART muxing
+ // until a proper solution can be created for the dmap conflict
+ // GPIO 14 - UART TX
+ // GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 14 }
+ // GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 14 }
+ // GPIO 15 - UART RX
+ // GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 15 }
+ // GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 15 }
+ // GPIO 16
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 16 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 16 }
+ // GPIO 17
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 17 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 17 }
+ // GPIO 18
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 18 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 18 }
+ // GPIO 19
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 19 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 19 }
+ // GPIO 20
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 20 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 20 }
+ // GPIO 21
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 21 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 21 }
+ // GPIO 22
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 22 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 22 }
+ // GPIO 23
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 23 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 23 }
+ // GPIO 24
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 24 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 24 }
+ // GPIO 25
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 25 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 25 }
+ // GPIO 26
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 26 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 26 }
+ // GPIO 27
+ GpioIO(Shared, PullDown, 0, 0, IoRestrictionNone, "\\_SB.GPI0", 0, ResourceConsumer, , ) { 27 }
+ GpioInt(Edge, ActiveBoth, Shared, PullDown, 0, "\\_SB.GPI0",) { 27 }
+ })
+
+ Name(_DSD, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package()
+ {
+ // Reference http://www.raspberrypi.org/documentation/hardware/raspberrypi/spi/README.md
+ // SPI 0
+ Package(2) { "bus-SPI-SPI0", Package() { 0, 1 }}, // Index 0 & 1
+ Package(2) { "SPI0-MinClockInHz", 7629 }, // 7629 Hz
+ Package(2) { "SPI0-MaxClockInHz", 125000000 }, // 125 MHz
+ Package(2) { "SPI0-SupportedDataBitLengths", Package() { 8 }}, // Data Bit Length
+ // I2C1
+ Package(2) { "bus-I2C-I2C1", Package() { 2 }},
+ // GPIO Pin Count and supported drive modes
+ Package (2) { "GPIO-PinCount", 54 },
+ Package (2) { "GPIO-UseDescriptorPinNumbers", 1 },
+ Package (2) { "GPIO-SupportedDriveModes", 0xf }, // InputHighImpedance, InputPullUp, InputPullDown, OutputCmos
+ // SPI 1
+ Package(2) { "bus-SPI-SPI1", Package() { 3 }}, // Index 3
+ Package(2) { "SPI1-MinClockInHz", 30511 }, // 30.5 kHz
+ Package(2) { "SPI1-MaxClockInHz", 20000000 }, // 20 MHz
+ Package(2) { "SPI1-SupportedDataBitLengths", Package() { 8 }}, // Data Bit Length
+ }
+ })
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl b/Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl
new file mode 100644
index 000000000000..a39138ce5c5c
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl
@@ -0,0 +1,105 @@
+/** @file
+ *
+ * [DSDT] SD controller/card definition (SDHC)
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+//
+// Note: UEFI can use either SDHost or Arasan. We expose both to the OS.
+//
+
+//
+// Description: This is ArasanSD 3.0 SD Host Controller.
+//
+
+Device (SDC1)
+{
+ Name (_HID, "BCM2847")
+ Name (_CID, "ARASAN")
+ Name (_UID, 0x0)
+ Name (_S1D, 0x1)
+ Name (_S2D, 0x1)
+ Name (_S3D, 0x1)
+ Name (_S4D, 0x1)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F300000, 0x100, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x5E }
+ })
+ Return(RBUF)
+ }
+
+ //
+ // A child device that represents the
+ // sd card, which is marked as non-removable.
+ //
+ Device (SDMM)
+ {
+ Method (_ADR)
+ {
+ Return (0)
+ }
+ Method (_RMV) // Is removable
+ {
+ Return (0) // 0 - fixed
+ }
+ }
+}
+
+
+//
+// Description: This is Broadcom SDHost 2.0 SD Host Controller
+//
+
+Device (SDC2)
+{
+ Name (_HID, "BCM2855")
+ Name (_CID, "SDHST")
+ Name (_UID, 0x0)
+ Name (_S1D, 0x1)
+ Name (_S2D, 0x1)
+ Name (_S3D, 0x1)
+ Name (_S4D, 0x1)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F202000, 0x100, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x58 }
+ })
+ Return(RBUF)
+ }
+
+ //
+ // A child device that represents the
+ // sd card, which is marked as non-removable.
+ //
+ Device (SDMM)
+ {
+ Method (_ADR)
+ {
+ Return (0)
+ }
+ Method (_RMV) // Is removable
+ {
+ Return (0) // 0 - fixed
+ }
+ }
+}
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl b/Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl
new file mode 100644
index 000000000000..a6fbfd08e021
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl
@@ -0,0 +1,53 @@
+/** @file
+ *
+ * Serial Port Console Redirection Table (SPCR)
+ *
+ * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+[000h 0000 4] Signature : "SPCR" [Serial Port Console Redirection table]
+[004h 0004 4] Table Length : 00000050
+[008h 0008 1] Revision : 01
+[009h 0009 1] Checksum : 00
+[00Ah 0010 6] Oem ID : "RPiEFI"
+[010h 0016 8] Oem Table ID : "RPi3UEFI"
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "----"
+[020h 0032 4] Asl Compiler Revision : 00000000
+
+[024h 0036 1] Interface Type : 10
+[025h 0037 3] Reserved : 000000
+
+[028h 0040 12] Serial Port Register : [Generic Address Structure]
+[028h 0040 1] Space ID : 00 [SystemMemory]
+[029h 0041 1] Bit Width : 20
+[02Ah 0042 1] Bit Offset : 00
+[02Bh 0043 1] Encoded Access Width : 02 [DWord Access:32]
+[02Ch 0044 8] Address : 000000003f215000
+
+[034h 0052 1] Interrupt Type : 0E
+[035h 0053 1] PCAT-compatible IRQ : 00
+[036h 0054 4] Interrupt : 3D
+[03Ah 0058 1] Baud Rate : 07
+[03Bh 0059 1] Parity : 00
+[03Ch 0060 1] Stop Bits : 01
+[03Dh 0061 1] Flow Control : 00
+[03Eh 0062 1] Terminal Type : 00
+[04Ch 0076 1] Reserved : 00
+[040h 0064 2] PCI Device ID : FFFF
+[042h 0066 2] PCI Vendor ID : FFFF
+[044h 0068 1] PCI Bus : 00
+[045h 0069 1] PCI Device : 00
+[046h 0070 1] PCI Function : 00
+[047h 0071 4] PCI Flags : 00000000
+[04Bh 0075 1] PCI Segment : 00
+[04Ch 0076 4] Reserved : 00000000
diff --git a/Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl b/Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl
new file mode 100644
index 000000000000..fa92cf24db91
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl
@@ -0,0 +1,155 @@
+/** @file
+ *
+ * [DSDT] Serial devices (UART).
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+//
+// Description: This is the PL011 based UART.
+//
+
+Device (URT0)
+{
+ Name (_HID, "BCM2837")
+ Name (_CID, "HID3123")
+ Name (_UID, 0x4)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F201000, 0x1000, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 0x59 }
+ })
+ Return(RBUF)
+ }
+
+ Name (CLCK, 3000000)
+
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package (2) { "clock-frequency", CLCK },
+ }
+ })
+}
+
+//
+// Description: UART Mini.
+//
+// This device is referenced in the DBG2 table, which will cause the system to
+// not start the driver when the debugger is enabled and to mark the device
+// with problem code 53 (CM_PROB_USED_BY_DEBUGGER).
+//
+
+Device (URTM)
+{
+ Name (_HID, "BCM2836")
+ Name (_CID, "MINIUART")
+ Name (_UID, 0x0)
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ MEMORY32FIXED(ReadWrite, 0x3F215000, 0x70, )
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared) {0x3D}
+
+ // NTRAID#MSFT-7141401-2016/04/7-jordanrh - disable UART muxing
+ // until a proper solution can be created for the dmap conflict.
+ // When muxing is enabled, must consider DBG2 table conflict.
+ // The alternate function resource needs to be reserved when
+ // the kernel debugger is enabled to prevent another client
+ // from muxing the pins away.
+
+ //
+ // MsftFunctionConfig is encoded as the VendorLong.
+ //
+ // MsftFunctionConfig(Exclusive, PullDown, BCM_ALT5, "\\_SB.GPI0", 0, ResourceConsumer, ) {14, 15}
+ // VendorLong () // Length = 0x31
+ // {
+ // /* 0000 */ 0x00, 0x60, 0x44, 0xD5, 0xF3, 0x1F, 0x11, 0x60, // .`D....`
+ // /* 0008 */ 0x4A, 0xB8, 0xB0, 0x9C, 0x2D, 0x23, 0x30, 0xDD, // J...-#0.
+ // /* 0010 */ 0x2F, 0x8D, 0x1D, 0x00, 0x01, 0x10, 0x00, 0x02, // /.......
+ // /* 0018 */ 0x02, 0x00, 0x12, 0x00, 0x00, 0x16, 0x00, 0x20, // .......
+ // /* 0020 */ 0x00, 0x00, 0x00, 0x0E, 0x00, 0x0F, 0x00, 0x5C, // .......\
+ // /* 0028 */ 0x5F, 0x53, 0x42, 0x2E, 0x47, 0x50, 0x49, 0x30, // _SB.GPI0
+ // /* 0030 */ 0x00 // .
+ //}
+
+ })
+ Return(RBUF)
+ }
+}
+
+//
+// Multifunction serial bus device to support Bluetooth function.
+//
+
+Device(BTH0)
+{
+ Name (_HID, "BCM2EA6")
+ Name (_CID, "BCM2EA6")
+ Method (_STA)
+ {
+ Return(0xf)
+ }
+ Method (_CRS, 0x0, Serialized) {
+ Name (RBUF, ResourceTemplate () {
+ //
+ // BT UART: UART0 (PL011)
+ //
+ UARTSerialBus(
+ 115200, // InitialBaudRate: in BPS
+ , // BitsPerByte: default to 8 bits
+ , // StopBits: Defaults to one bit
+ 0x00, // LinesInUse: 8 1-bit flags to
+ // declare enabled control lines.
+ // Raspberry Pi does not exposed
+ // HW control signals -> not supported.
+ // Optional bits:
+ // - Bit 7 (0x80) Request To Send (RTS)
+ // - Bit 6 (0x40) Clear To Send (CTS)
+ // - Bit 5 (0x20) Data Terminal Ready (DTR)
+ // - Bit 4 (0x10) Data Set Ready (DSR)
+ // - Bit 3 (0x08) Ring Indicator (RI)
+ // - Bit 2 (0x04) Data Carrier Detect (DTD)
+ // - Bit 1 (0x02) Reserved. Must be 0.
+ // - Bit 0 (0x01) Reserved. Must be 0.
+ , // IsBigEndian:
+ // default to LittleEndian.
+ , // Parity: Defaults to no parity
+ , // FlowControl: Defaults to
+ // no flow control.
+ 16, // ReceiveBufferSize
+ 16, // TransmitBufferSize
+ "\\_SB.URT0", // ResourceSource:
+ // UART bus controller name
+ , // ResourceSourceIndex: assumed to be 0
+ , // ResourceUsage: assumed to be
+ // ResourceConsumer
+ UAR0, // DescriptorName: creates name
+ // for offset of resource descriptor
+ ) // Vendor data
+
+ //
+ // RPIQ connection for BT_ON/OFF
+ //
+ GpioIO(Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.RPIQ", 0, ResourceConsumer, , ) { 128 }
+ })
+ Return(RBUF)
+ }
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c b/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
new file mode 100644
index 000000000000..a070b6d5d8d9
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
@@ -0,0 +1,730 @@
+/** @file
+ *
+ * Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "ArasanMmcHostDxe.h"
+
+#define DEBUG_MMCHOST_SD DEBUG_VERBOSE
+
+BOOLEAN PreviousIsCardPresent = FALSE;
+UINT32 LastExecutedCommand = (UINT32) -1;
+
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+
+/**
+ These SD commands are optional, according to the SD Spec
+**/
+BOOLEAN
+IgnoreCommand(
+ UINT32 Command
+ )
+{
+ switch (Command) {
+ case MMC_CMD20:
+ return TRUE;
+ default:
+ return FALSE;
+ }
+}
+
+/**
+ Translates a generic SD command into the format used by the Arasan SD Host Controller
+**/
+UINT32
+TranslateCommand(
+ UINT32 Command,
+ UINT32 Argument
+ )
+{
+ UINT32 Translation = 0xffffffff;
+
+ if (LastExecutedCommand == CMD55) {
+ switch (Command) {
+ case MMC_CMD6:
+ Translation = ACMD6;
+ DEBUG((DEBUG_MMCHOST_SD, "ACMD6\n"));
+ break;
+ case MMC_ACMD22:
+ Translation = ACMD22;
+ DEBUG((DEBUG_MMCHOST_SD, "ACMD22\n"));
+ break;
+ case MMC_ACMD41:
+ Translation = ACMD41;
+ DEBUG((DEBUG_MMCHOST_SD, "ACMD41\n"));
+ break;
+ case MMC_ACMD51:
+ Translation = ACMD51;
+ DEBUG((DEBUG_MMCHOST_SD, "ACMD51\n"));
+ break;
+ default:
+ DEBUG((DEBUG_ERROR, "ArasanMMCHost: TranslateCommand(): Unrecognized App command: %d\n", Command));
+ }
+ } else {
+ switch (Command) {
+ case MMC_CMD0:
+ Translation = CMD0;
+ break;
+ case MMC_CMD1:
+ Translation = CMD1;
+ break;
+ case MMC_CMD2:
+ Translation = CMD2;
+ break;
+ case MMC_CMD3:
+ Translation = CMD3;
+ break;
+ case MMC_CMD5:
+ Translation = CMD5;
+ break;
+ case MMC_CMD6:
+ Translation = CMD6;
+ break;
+ case MMC_CMD7:
+ Translation = CMD7;
+ break;
+ case MMC_CMD8: {
+ if (Argument == CMD8_SD_ARG) {
+ Translation = CMD8_SD;
+ DEBUG((DEBUG_MMCHOST_SD, "Sending SD CMD8 variant\n"));
+ } else {
+ ASSERT (Argument == CMD8_MMC_ARG);
+ Translation = CMD8_MMC;
+ DEBUG((DEBUG_MMCHOST_SD, "Sending MMC CMD8 variant\n"));
+ }
+ break;
+ }
+ case MMC_CMD9:
+ Translation = CMD9;
+ break;
+ case MMC_CMD11:
+ Translation = CMD11;
+ break;
+ case MMC_CMD12:
+ Translation = CMD12;
+ break;
+ case MMC_CMD13:
+ Translation = CMD13;
+ break;
+ case MMC_CMD16:
+ Translation = CMD16;
+ break;
+ case MMC_CMD17:
+ Translation = CMD17;
+ break;
+ case MMC_CMD18:
+ Translation = CMD18;
+ break;
+ case MMC_CMD23:
+ Translation = CMD23;
+ break;
+ case MMC_CMD24:
+ Translation = CMD24;
+ break;
+ case MMC_CMD25:
+ Translation = CMD25;
+ break;
+ case MMC_CMD55:
+ Translation = CMD55;
+ break;
+ default:
+ DEBUG((DEBUG_ERROR, "ArasanMMCHost: TranslateCommand(): Unrecognized Command: %d\n", Command));
+ }
+ }
+
+ return Translation;
+}
+
+/**
+ Repeatedly polls a register until its value becomes correct, or until MAX_RETRY_COUNT polls is reached
+**/
+EFI_STATUS
+PollRegisterWithMask(
+ IN UINTN Register,
+ IN UINTN Mask,
+ IN UINTN ExpectedValue
+ )
+{
+ UINTN RetryCount = 0;
+
+ while (RetryCount < MAX_RETRY_COUNT) {
+ if ((MmioRead32(Register) & Mask) != ExpectedValue) {
+ RetryCount++;
+ gBS->Stall(STALL_AFTER_RETRY_US);
+ } else {
+ break;
+ }
+ }
+
+ if (RetryCount == MAX_RETRY_COUNT) {
+ return EFI_TIMEOUT;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+SoftReset(
+ IN UINT32 Mask
+ )
+{
+ MmioOr32(MMCHS_SYSCTL, Mask);
+ if (PollRegisterWithMask(MMCHS_SYSCTL, Mask, 0) == EFI_TIMEOUT) {
+ DEBUG((DEBUG_ERROR, "Failed to SoftReset with mask 0x%x\n", Mask));
+ return EFI_TIMEOUT;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Calculate the clock divisor
+**/
+EFI_STATUS
+CalculateClockFrequencyDivisor(
+ IN UINTN TargetFrequency,
+ OUT UINT32 *DivisorValue,
+ OUT UINTN *ActualFrequency
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Divisor;
+ UINT32 BaseFrequency = 0;
+
+ Status = mFwProtocol->GetClockRate(RPI_FW_CLOCK_RATE_EMMC, &BaseFrequency);
+ if (EFI_ERROR(Status)) {
+ DEBUG((DEBUG_ERROR, "Couldn't get RPI_FW_CLOCK_RATE_EMMC\n"));
+ return Status;
+ }
+
+ ASSERT (BaseFrequency != 0);
+ Divisor = BaseFrequency / TargetFrequency;
+
+ // Arasan controller is based on 3.0 spec so the div is multiple of 2
+ // Actual Frequency = BaseFequency/(Div*2)
+ Divisor /= 2;
+
+ if ((TargetFrequency < BaseFrequency) &&
+ (TargetFrequency * 2 * Divisor != BaseFrequency)) {
+ Divisor += 1;
+ }
+
+ if (Divisor > MAX_DIVISOR_VALUE) {
+ Divisor = MAX_DIVISOR_VALUE;
+ }
+
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: BaseFrequency 0x%x Divisor 0x%x\n", BaseFrequency, Divisor));
+
+ *DivisorValue = (Divisor & 0xFF) << 8;
+ Divisor >>= 8;
+ *DivisorValue |= (Divisor & 0x03) << 6;
+
+ if (ActualFrequency) {
+ if (Divisor == 0) {
+ *ActualFrequency = BaseFrequency;
+ } else {
+ *ActualFrequency = BaseFrequency / Divisor;
+ *ActualFrequency >>= 1;
+ }
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: *ActualFrequency 0x%x\n", *ActualFrequency));
+ }
+
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: *DivisorValue 0x%x\n", *DivisorValue));
+
+ return EFI_SUCCESS;
+}
+
+BOOLEAN
+MMCIsCardPresent(
+ IN EFI_MMC_HOST_PROTOCOL *This
+ )
+{
+ return TRUE;
+}
+
+BOOLEAN
+MMCIsReadOnly(
+ IN EFI_MMC_HOST_PROTOCOL *This
+ )
+{
+ BOOLEAN IsReadOnly = !((MmioRead32(MMCHS_PRES_STATE) & WRITE_PROTECT_OFF) == WRITE_PROTECT_OFF);
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCIsReadOnly(): %d\n", IsReadOnly));
+ return IsReadOnly;
+}
+
+EFI_STATUS
+MMCBuildDevicePath(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ EFI_DEVICE_PATH_PROTOCOL *NewDevicePathNode;
+ EFI_GUID DevicePathGuid = EFI_CALLER_ID_GUID;
+
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCBuildDevicePath()\n"));
+
+ NewDevicePathNode = CreateDeviceNode(HARDWARE_DEVICE_PATH, HW_VENDOR_DP, sizeof(VENDOR_DEVICE_PATH));
+ CopyGuid(&((VENDOR_DEVICE_PATH*)NewDevicePathNode)->Guid, &DevicePathGuid);
+ *DevicePath = NewDevicePathNode;
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+MMCSendCommand(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_CMD MmcCmd,
+ IN UINT32 Argument
+ )
+{
+ UINTN MmcStatus;
+ UINTN RetryCount = 0;
+ UINTN CmdSendOKMask;
+ EFI_STATUS Status = EFI_SUCCESS;
+ BOOLEAN IsAppCmd = (LastExecutedCommand == CMD55);
+ BOOLEAN IsDATCmd = FALSE;
+ BOOLEAN IsADTCCmd = FALSE;
+
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCSendCommand(MmcCmd: %08x, Argument: %08x)\n", MmcCmd, Argument));
+
+ if (IgnoreCommand(MmcCmd)) {
+ return EFI_SUCCESS;
+ }
+
+ MmcCmd = TranslateCommand(MmcCmd, Argument);
+ if (MmcCmd == 0xffffffff) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if ((MmcCmd & CMD_R1_ADTC) == CMD_R1_ADTC) {
+ IsADTCCmd = TRUE;
+ }
+ if (((MmcCmd & CMD_R1B) == CMD_R1B &&
+ /*
+ * Abort commands don't get inhibited by DAT.
+ */
+ (MmcCmd & TYPE(CMD_TYPE_ABORT)) != TYPE(CMD_TYPE_ABORT)) ||
+ IsADTCCmd ||
+ /*
+ * We want to detect BRR/BWR change.
+ */
+ MmcCmd == CMD_SEND_STATUS) {
+ IsDATCmd = TRUE;
+ }
+
+ CmdSendOKMask = CMDI_MASK;
+ if (IsDATCmd) {
+ CmdSendOKMask |= DATI_MASK;
+ }
+
+ if (PollRegisterWithMask(MMCHS_PRES_STATE,
+ CmdSendOKMask, 0) == EFI_TIMEOUT) {
+ DEBUG((DEBUG_ERROR, "%a(%u): not ready for MMC_CMD%u PresState 0x%x MmcStatus 0x%x\n",
+ __FUNCTION__, __LINE__, MMC_CMD_NUM(MmcCmd),
+ MmioRead32(MMCHS_PRES_STATE),
+ MmioRead32(MMCHS_INT_STAT)));
+ Status = EFI_TIMEOUT;
+ goto out;
+ }
+
+ if (IsAppCmd && MmcCmd == ACMD22) {
+ MmioWrite32(MMCHS_BLK, 4);
+ } else if (IsAppCmd && MmcCmd == ACMD51) {
+ MmioWrite32(MMCHS_BLK, 8);
+ } else if (!IsAppCmd && MmcCmd == CMD6) {
+ MmioWrite32(MMCHS_BLK, 64);
+ } else if (IsADTCCmd) {
+ MmioWrite32(MMCHS_BLK, BLEN_512BYTES);
+ }
+
+ // Set Data timeout counter value to max value.
+ MmioAndThenOr32(MMCHS_SYSCTL, (UINT32) ~DTO_MASK, DTO_VAL);
+
+ //
+ // Clear Interrupt Status Register, but not the Card Inserted bit
+ // to avoid messing with card detection logic.
+ //
+ MmioWrite32(MMCHS_INT_STAT, ALL_EN & ~(CARD_INS));
+
+ // Set command argument register
+ MmioWrite32(MMCHS_ARG, Argument);
+
+ // Send the command
+ MmioWrite32(MMCHS_CMD, MmcCmd);
+
+ // Check for the command status.
+ while (RetryCount < MAX_RETRY_COUNT) {
+ MmcStatus = MmioRead32(MMCHS_INT_STAT);
+
+ // Read status of command response
+ if ((MmcStatus & ERRI) != 0) {
+ //
+ // CMD5 (CMD_IO_SEND_OP_COND) is only valid for SDIO
+ // cards and thus expected to fail.
+ //
+ if (MmcCmd != CMD_IO_SEND_OP_COND) {
+ DEBUG((DEBUG_ERROR, "%a(%u): MMC_CMD%u ERRI MmcStatus 0x%x\n",
+ __FUNCTION__, __LINE__, MMC_CMD_NUM(MmcCmd), MmcStatus));
+ }
+
+ SoftReset(SRC);
+
+ Status = EFI_DEVICE_ERROR;
+ goto out;
+ }
+
+ // Check if command is completed.
+ if ((MmcStatus & CC) == CC) {
+ MmioWrite32(MMCHS_INT_STAT, CC);
+ break;
+ }
+
+ RetryCount++;
+ gBS->Stall(STALL_AFTER_RETRY_US);
+ }
+
+ gBS->Stall(STALL_AFTER_SEND_CMD_US);
+
+ if (RetryCount == MAX_RETRY_COUNT) {
+ DEBUG((DEBUG_ERROR, "%a(%u): MMC_CMD%u completion TIMEOUT PresState 0x%x MmcStatus 0x%x\n",
+ __FUNCTION__, __LINE__, MMC_CMD_NUM(MmcCmd),
+ MmioRead32(MMCHS_PRES_STATE),
+ MmcStatus));
+ Status = EFI_TIMEOUT;
+ goto out;
+ }
+
+ out:
+ if (EFI_ERROR(Status)) {
+ LastExecutedCommand = (UINT32) -1;
+ } else {
+ LastExecutedCommand = MmcCmd;
+ }
+ return Status;
+}
+
+EFI_STATUS
+MMCNotifyState(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_STATE State
+ )
+{
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCNotifyState(State: %d)\n", State));
+
+ switch (State) {
+ case MmcHwInitializationState:
+ {
+ EFI_STATUS Status;
+ UINT32 Divisor;
+
+ Status = SoftReset(SRA);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ // Attempt to set the clock to 400Khz which is the expected initialization speed
+ Status = CalculateClockFrequencyDivisor(400000, &Divisor, NULL);
+ if (EFI_ERROR(Status)) {
+ DEBUG((DEBUG_ERROR, "ArasanMMCHost: MMCNotifyState(): Fail to initialize SD clock\n"));
+ return Status;
+ }
+
+ // Set Data Timeout Counter value, set clock frequency, enable internal clock
+ MmioOr32(MMCHS_SYSCTL, DTO_VAL | Divisor | CEN | ICS | ICE);
+
+ // Enable interrupts
+ MmioWrite32(MMCHS_IE, ALL_EN);
+ }
+ break;
+ case MmcIdleState:
+ break;
+ case MmcReadyState:
+ break;
+ case MmcIdentificationState:
+ break;
+ case MmcStandByState: {
+ EFI_STATUS Status;
+ UINTN ClockFrequency = 25000000;
+ UINT32 Divisor;
+
+ // First turn off the clock
+ MmioAnd32(MMCHS_SYSCTL, ~CEN);
+
+ Status = CalculateClockFrequencyDivisor(ClockFrequency, &Divisor, NULL);
+ if (EFI_ERROR(Status)) {
+ DEBUG((DEBUG_ERROR, "ArasanMMCHost: MmcStandByState(): Fail to initialize SD clock to %u Hz\n",
+ ClockFrequency));
+ return Status;
+ }
+
+ // Setup new divisor
+ MmioAndThenOr32(MMCHS_SYSCTL, (UINT32) ~CLKD_MASK, Divisor);
+
+ // Wait for the clock to stabilise
+ while ((MmioRead32(MMCHS_SYSCTL) & ICS_MASK) != ICS);
+
+ // Set Data Timeout Counter value, set clock frequency, enable internal clock
+ MmioOr32(MMCHS_SYSCTL, CEN);
+ }
+ break;
+ case MmcTransferState:
+ break;
+ case MmcSendingDataState:
+ break;
+ case MmcReceiveDataState:
+ break;
+ case MmcProgrammingState:
+ break;
+ case MmcDisconnectState:
+ case MmcInvalidState:
+ default:
+ DEBUG((DEBUG_ERROR, "ArasanMMCHost: MMCNotifyState(): Invalid State: %d\n", State));
+ ASSERT(0);
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+MMCReceiveResponse(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_RESPONSE_TYPE Type,
+ IN UINT32* Buffer
+ )
+{
+ ASSERT (Buffer != NULL);
+
+ if (Type == MMC_RESPONSE_TYPE_R2) {
+
+ // 16-byte response
+ Buffer[0] = MmioRead32(MMCHS_RSP10);
+ Buffer[1] = MmioRead32(MMCHS_RSP32);
+ Buffer[2] = MmioRead32(MMCHS_RSP54);
+ Buffer[3] = MmioRead32(MMCHS_RSP76);
+
+ Buffer[3] <<= 8;
+ Buffer[3] |= (Buffer[2] >> 24) & 0xFF;
+ Buffer[2] <<= 8;
+ Buffer[2] |= (Buffer[1] >> 24) & 0xFF;
+ Buffer[1] <<= 8;
+ Buffer[1] |= (Buffer[0] >> 24) & 0xFF;
+ Buffer[0] <<= 8;
+
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "ArasanMMCHost: MMCReceiveResponse(Type: %x), Buffer[0-3]: %08x, %08x, %08x, %08x\n",
+ Type, Buffer[0], Buffer[1], Buffer[2], Buffer[3]));
+ } else {
+ // 4-byte response
+ Buffer[0] = MmioRead32(MMCHS_RSP10);
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCReceiveResponse(Type: %08x), Buffer[0]: %08x\n", Type, Buffer[0]));
+ }
+
+ gBS->Stall(STALL_AFTER_REC_RESP_US);
+ if (LastExecutedCommand == CMD_STOP_TRANSMISSION) {
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: soft-resetting after CMD12\n"));
+ return SoftReset(SRC | SRD);
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+MMCReadBlockData(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Length,
+ IN UINT32* Buffer
+ )
+{
+ UINTN MmcStatus;
+ UINTN RemLength;
+ UINTN Count;
+
+ DEBUG((DEBUG_VERBOSE, "%a(%u): LBA: 0x%x, Length: 0x%x, Buffer: 0x%x)\n",
+ __FUNCTION__, __LINE__, Lba, Length, Buffer));
+
+ if (Buffer == NULL) {
+ DEBUG((DEBUG_ERROR, "%a(%u): NULL Buffer\n",
+ __FUNCTION__, __LINE__));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Length % sizeof(UINT32) != 0) {
+ DEBUG((DEBUG_ERROR, "%a(%u): bad Length %u\n",
+ __FUNCTION__, __LINE__, Length));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ RemLength = Length;
+ while (RemLength != 0) {
+ UINTN RetryCount = 0;
+ UINT32 BlockLen = MIN(RemLength, BLEN_512BYTES);
+
+ while (RetryCount < MAX_RETRY_COUNT) {
+ MmcStatus = MmioRead32(MMCHS_INT_STAT);
+ if ((MmcStatus & BRR) != 0) {
+ MmioWrite32(MMCHS_INT_STAT, BRR);
+ /*
+ * Data is ready.
+ */
+ mFwProtocol->SetLed(TRUE);
+ for (Count = 0; Count < BlockLen; Count += 4, Buffer++) {
+ *Buffer = MmioRead32(MMCHS_DATA);
+ }
+
+ mFwProtocol->SetLed(FALSE);
+ break;
+ }
+
+ gBS->Stall(STALL_AFTER_RETRY_US);
+ RetryCount++;
+ }
+
+ if (RetryCount == MAX_RETRY_COUNT) {
+ DEBUG((DEBUG_ERROR, "%a(%u): %lu/%lu MMCHS_INT_STAT: %08x\n",
+ __FUNCTION__, __LINE__, Length - RemLength,
+ Length, MmcStatus));
+ return EFI_TIMEOUT;
+ }
+
+ RemLength -= BlockLen;
+ gBS->Stall(STALL_AFTER_READ_US);
+ }
+
+ MmioWrite32(MMCHS_INT_STAT, BRR);
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+MMCWriteBlockData(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Length,
+ IN UINT32* Buffer
+ )
+{
+ UINTN MmcStatus;
+ UINTN RemLength;
+ UINTN Count;
+
+ DEBUG((DEBUG_VERBOSE, "%a(%u): LBA: 0x%x, Length: 0x%x, Buffer: 0x%x)\n",
+ __FUNCTION__, __LINE__, Lba, Length, Buffer));
+
+ if (Buffer == NULL) {
+ DEBUG((DEBUG_ERROR, "%a(%u): NULL Buffer\n",
+ __FUNCTION__, __LINE__));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Length % sizeof(UINT32) != 0) {
+ DEBUG((DEBUG_ERROR, "%a(%u): bad Length %u\n",
+ __FUNCTION__, __LINE__, Length));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ RemLength = Length;
+ while (RemLength != 0) {
+ UINTN RetryCount = 0;
+ UINT32 BlockLen = MIN(RemLength, BLEN_512BYTES);
+
+ while (RetryCount < MAX_RETRY_COUNT) {
+ MmcStatus = MmioRead32(MMCHS_INT_STAT);
+ if ((MmcStatus & BWR) != 0) {
+ MmioWrite32(MMCHS_INT_STAT, BWR);
+ /*
+ * Can write data.
+ */
+ mFwProtocol->SetLed(TRUE);
+ for (Count = 0; Count < BlockLen; Count += 4, Buffer++) {
+ MmioWrite32(MMCHS_DATA, *Buffer);
+ }
+
+ mFwProtocol->SetLed(FALSE);
+ break;
+ }
+
+ gBS->Stall(STALL_AFTER_RETRY_US);
+ RetryCount++;
+ }
+
+ if (RetryCount == MAX_RETRY_COUNT) {
+ DEBUG((DEBUG_ERROR, "%a(%u): %lu/%lu MMCHS_INT_STAT: %08x\n",
+ __FUNCTION__, __LINE__, Length - RemLength,
+ Length, MmcStatus));
+ return EFI_TIMEOUT;
+ }
+
+ RemLength -= BlockLen;
+ gBS->Stall(STALL_AFTER_WRITE_US);
+ }
+
+ MmioWrite32(MMCHS_INT_STAT, BWR);
+ return EFI_SUCCESS;
+}
+
+BOOLEAN
+MMCIsMultiBlock (
+ IN EFI_MMC_HOST_PROTOCOL *This
+ )
+{
+ return TRUE;
+}
+
+EFI_MMC_HOST_PROTOCOL gMMCHost =
+ {
+ MMC_HOST_PROTOCOL_REVISION,
+ MMCIsCardPresent,
+ MMCIsReadOnly,
+ MMCBuildDevicePath,
+ MMCNotifyState,
+ MMCSendCommand,
+ MMCReceiveResponse,
+ MMCReadBlockData,
+ MMCWriteBlockData,
+ NULL,
+ MMCIsMultiBlock
+ };
+
+EFI_STATUS
+MMCInitialize(
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle = NULL;
+
+ DEBUG((DEBUG_MMCHOST_SD, "ArasanMMCHost: MMCInitialize()\n"));
+
+ if (!PcdGet32 (PcdSdIsArasan)) {
+ DEBUG((DEBUG_INFO, "SD is not routed to Arasan\n"));
+ return EFI_REQUEST_UNLOAD_IMAGE;
+ }
+
+ Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
+ (VOID **)&mFwProtocol);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gRaspberryPiMmcHostProtocolGuid, &gMMCHost,
+ NULL
+ );
+ ASSERT_EFI_ERROR(Status);
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h b/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
new file mode 100644
index 000000000000..6b4f0da4a425
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
@@ -0,0 +1,50 @@
+/** @file
+ *
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef _MMC_HOST_DXE_H_
+#define _MMC_HOST_DXE_H_
+
+#include <Uefi.h>
+
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DmaLib.h>
+
+#include <Protocol/EmbeddedExternalDevice.h>
+#include <Protocol/BlockIo.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/PiMmcHost.h>
+#include <Protocol/RaspberryPiFirmware.h>
+
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/Bcm2836MmcHs.h>
+#include <IndustryStandard/RpiFirmware.h>
+
+#define MAX_RETRY_COUNT (1000 * 20)
+
+#define STALL_AFTER_SEND_CMD_US (200) // in microseconds
+#define STALL_AFTER_REC_RESP_US (50)
+#define STALL_AFTER_WRITE_US (200)
+#define STALL_AFTER_READ_US (20)
+#define STALL_AFTER_RETRY_US (20)
+
+#define MAX_DIVISOR_VALUE 1023
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf
new file mode 100644
index 000000000000..4d70c1b72815
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf
@@ -0,0 +1,53 @@
+#/** @file
+#
+# Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) Microsoft Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ArasanMMCHost
+ FILE_GUID = 100c2cfa-b586-4198-9b4c-1683d195b1da
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = MMCInitialize
+
+
+[Sources.common]
+ ArasanMmcHostDxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ PcdLib
+ UefiLib
+ UefiDriverEntryPoint
+ MemoryAllocationLib
+ IoLib
+ DmaLib
+ CacheMaintenanceLib
+
+[Guids]
+
+[Protocols]
+ gRaspberryPiMmcHostProtocolGuid ## PRODUCES
+ gRaspberryPiFirmwareProtocolGuid ## CONSUMES
+
+[Pcd]
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan
+
+[Depex]
+ gRaspberryPiFirmwareProtocolGuid AND gRaspberryPiConfigAppliedProtocolGuid
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
new file mode 100644
index 000000000000..dda61665031d
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
@@ -0,0 +1,367 @@
+/** @file
+ *
+ * Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <IndustryStandard/Bcm2836.h>
+
+#include <Protocol/Cpu.h>
+#include <Protocol/HardwareInterrupt.h>
+
+//
+// This currently only implements support for the architected timer interrupts
+// on the per-CPU interrupt controllers.
+//
+#define NUM_IRQS (4)
+
+#ifdef MDE_CPU_AARCH64
+#define ARM_ARCH_EXCEPTION_IRQ EXCEPT_AARCH64_IRQ
+#else
+#define ARM_ARCH_EXCEPTION_IRQ EXCEPT_ARM_IRQ
+#endif
+
+STATIC CONST
+EFI_PHYSICAL_ADDRESS RegBase = FixedPcdGet32 (PcdInterruptBaseAddress);
+
+//
+// Notifications
+//
+STATIC EFI_EVENT mExitBootServicesEvent;
+STATIC HARDWARE_INTERRUPT_HANDLER mRegisteredInterruptHandlers[NUM_IRQS];
+
+/**
+ Shutdown our hardware
+
+ DXE Core will disable interrupts and turn off the timer and disable interrupts
+ after all the event handlers have run.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+STATIC
+VOID
+EFIAPI
+ExitBootServicesEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ // Disable all interrupts
+ MmioWrite32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET, 0);
+}
+
+/**
+ Enable interrupt source Source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+
+ @retval EFI_SUCCESS Source interrupt enabled.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+EnableInterruptSource (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source
+ )
+{
+ if (Source >= NUM_IRQS) {
+ ASSERT(FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ MmioOr32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET, 1 << Source);
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Disable interrupt source Source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+
+ @retval EFI_SUCCESS Source interrupt disabled.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+DisableInterruptSource (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source
+ )
+{
+ if (Source >= NUM_IRQS) {
+ ASSERT(FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ MmioAnd32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET, ~(1 << Source));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Register Handler for the specified interrupt source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+ @param Handler Callback for interrupt. NULL to unregister
+
+ @retval EFI_SUCCESS Source was updated to support Handler.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+RegisterInterruptSource (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source,
+ IN HARDWARE_INTERRUPT_HANDLER Handler
+ )
+{
+ if (Source >= NUM_IRQS) {
+ ASSERT (FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ if (Handler == NULL && mRegisteredInterruptHandlers[Source] == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Handler != NULL && mRegisteredInterruptHandlers[Source] != NULL) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ mRegisteredInterruptHandlers[Source] = Handler;
+ return EnableInterruptSource(This, Source);
+}
+
+
+/**
+ Return current state of interrupt source Source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+ @param InterruptState TRUE: source enabled, FALSE: source disabled.
+
+ @retval EFI_SUCCESS InterruptState is valid
+ @retval EFI_DEVICE_ERROR InterruptState is not valid
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+GetInterruptSourceState (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source,
+ IN BOOLEAN *InterruptState
+ )
+{
+ if (InterruptState == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Source >= NUM_IRQS) {
+ ASSERT(FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ *InterruptState = (MmioRead32 (RegBase + BCM2836_INTC_TIMER_CONTROL_OFFSET) &
+ (1 << Source)) != 0;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Signal to the hardware that the End Of Intrrupt state
+ has been reached.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+
+ @retval EFI_SUCCESS Source interrupt EOI'ed.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+EndOfInterrupt (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source
+ )
+{
+ return EFI_SUCCESS;
+}
+
+
+/**
+ EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.
+
+ @param InterruptType Defines the type of interrupt or exception that
+ occurred on the processor.This parameter is processor
+ architecture specific.
+ @param SystemContext A pointer to the processor context when
+ the interrupt occurred on the processor.
+
+ @return None
+
+**/
+STATIC
+VOID
+EFIAPI
+IrqInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ HARDWARE_INTERRUPT_HANDLER InterruptHandler;
+ HARDWARE_INTERRUPT_SOURCE Source;
+ UINT32 RegVal;
+
+ RegVal = MmioRead32 (RegBase + BCM2836_INTC_TIMER_PENDING_OFFSET) &
+ ((1 << NUM_IRQS) - 1);
+ Source = HighBitSet32 (RegVal);
+ if (Source < 0) {
+ return;
+ }
+
+ InterruptHandler = mRegisteredInterruptHandlers [Source];
+ if (InterruptHandler != NULL) {
+ // Call the registered interrupt handler.
+ InterruptHandler (Source, SystemContext);
+ }
+}
+
+//
+// The protocol instance produced by this driver
+//
+STATIC EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol = {
+ RegisterInterruptSource,
+ EnableInterruptSource,
+ DisableInterruptSource,
+ GetInterruptSourceState,
+ EndOfInterrupt
+};
+
+STATIC VOID *mCpuArchProtocolNotifyEventRegistration;
+
+STATIC
+VOID
+EFIAPI
+CpuArchEventProtocolNotify (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_CPU_ARCH_PROTOCOL *Cpu;
+ EFI_STATUS Status;
+
+ //
+ // Get the CPU protocol that this driver requires.
+ //
+ Status = gBS->LocateProtocol(&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu);
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ //
+ // Unregister the default exception handler.
+ //
+ Status = Cpu->RegisterInterruptHandler(Cpu, ARM_ARCH_EXCEPTION_IRQ, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Cpu->RegisterInterruptHandler() - %r\n",
+ __FUNCTION__, Status));
+ ASSERT (FALSE);
+ return;
+ }
+
+ //
+ // Register to receive interrupts
+ //
+ Status = Cpu->RegisterInterruptHandler(Cpu, ARM_ARCH_EXCEPTION_IRQ,
+ IrqInterruptHandler);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Cpu->RegisterInterruptHandler() - %r\n",
+ __FUNCTION__, Status));
+ ASSERT (FALSE);
+ return;
+ }
+}
+
+
+/**
+ Initialize the state information for the CPU Architectural Protocol
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+InterruptDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT CpuArchEvent;
+
+ // Make sure the Interrupt Controller Protocol is not already installed in the system.
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);
+
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &ImageHandle,
+ &gHardwareInterruptProtocolGuid,
+ &gHardwareInterruptProtocol,
+ NULL);
+ ASSERT_EFI_ERROR(Status);
+
+ //
+ // Install the interrupt handler as soon as the CPU arch protocol appears.
+ //
+ CpuArchEvent = EfiCreateProtocolNotifyEvent (
+ &gEfiCpuArchProtocolGuid,
+ TPL_CALLBACK,
+ CpuArchEventProtocolNotify,
+ NULL,
+ &mCpuArchProtocolNotifyEventRegistration
+ );
+ ASSERT (CpuArchEvent != NULL);
+
+ // Register for an ExitBootServicesEvent
+ Status = gBS->CreateEvent(EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY,
+ ExitBootServicesEvent, NULL, &mExitBootServicesEvent);
+
+ ASSERT_EFI_ERROR(Status);
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
new file mode 100644
index 000000000000..831ae1bfeeab
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
@@ -0,0 +1,48 @@
+#/** @file
+#
+# Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2016 Linaro, Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = Bcm2836InterruptDxe
+ FILE_GUID = 3944f2d7-2e09-4fc0-9e98-008375641453
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InterruptDxeInitialize
+
+[Sources]
+ Bcm2836InterruptDxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
+ UefiBootServicesTableLib
+ UefiLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gHardwareInterruptProtocolGuid ## PRODUCES
+ gEfiCpuArchProtocolGuid ## CONSUMES ## NOTIFY
+
+[FixedPcd]
+ gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress
+
+[Depex]
+ TRUE
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.c b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.c
new file mode 100644
index 000000000000..4e3c68ca2994
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.c
@@ -0,0 +1,356 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Uefi.h>
+#include <Library/HiiLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/GpioLib.h>
+#include <Protocol/RaspberryPiFirmware.h>
+#include <IndustryStandard/RpiFirmware.h>
+#include "ConfigDxeFormSetGuid.h"
+
+extern UINT8 ConfigDxeHiiBin[];
+extern UINT8 ConfigDxeStrings[];
+
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+
+typedef struct {
+ VENDOR_DEVICE_PATH VendorDevicePath;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} HII_VENDOR_DEVICE_PATH;
+
+STATIC HII_VENDOR_DEVICE_PATH mVendorDevicePath = {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8) (sizeof (VENDOR_DEVICE_PATH)),
+ (UINT8) ((sizeof (VENDOR_DEVICE_PATH)) >> 8)
+ }
+ },
+ CONFIGDXE_FORM_SET_GUID
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ (UINT8) (END_DEVICE_PATH_LENGTH),
+ (UINT8) ((END_DEVICE_PATH_LENGTH) >> 8)
+ }
+ }
+};
+
+
+STATIC EFI_STATUS
+InstallHiiPages (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_HII_HANDLE HiiHandle;
+ EFI_HANDLE DriverHandle;
+
+ DriverHandle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (&DriverHandle,
+ &gEfiDevicePathProtocolGuid,
+ &mVendorDevicePath,
+ NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ HiiHandle = HiiAddPackages (&gConfigDxeFormSetGuid,
+ DriverHandle,
+ ConfigDxeStrings,
+ ConfigDxeHiiBin,
+ NULL);
+
+ if (HiiHandle == NULL) {
+ gBS->UninstallMultipleProtocolInterfaces (DriverHandle,
+ &gEfiDevicePathProtocolGuid,
+ &mVendorDevicePath,
+ NULL);
+ return EFI_OUT_OF_RESOURCES;
+ }
+ return EFI_SUCCESS;
+}
+
+
+STATIC EFI_STATUS
+SetupVariables (
+ VOID
+ )
+{
+ UINTN Size;
+ UINT32 Var32;
+ EFI_STATUS Status;
+
+ /*
+ * Create the vars with default value.
+ * If we don't, forms won't be able to update.
+ */
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"CpuClock",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdCpuClock, PcdGet32 (PcdCpuClock));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"SdIsArasan",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdSdIsArasan, PcdGet32 (PcdSdIsArasan));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"MmcDisableMulti",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdMmcDisableMulti, PcdGet32 (PcdMmcDisableMulti));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"MmcForce1Bit",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdMmcForce1Bit, PcdGet32 (PcdMmcForce1Bit));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"MmcForceDefaultSpeed",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdMmcForceDefaultSpeed, PcdGet32 (PcdMmcForceDefaultSpeed));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"MmcSdDefaultSpeedMHz",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdMmcSdDefaultSpeedMHz, PcdGet32 (PcdMmcSdDefaultSpeedMHz));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"MmcSdHighSpeedMHz",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdMmcSdHighSpeedMHz, PcdGet32 (PcdMmcSdHighSpeedMHz));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"DebugEnableJTAG",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdDebugEnableJTAG, PcdGet32 (PcdDebugEnableJTAG));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"DebugShowUEFIExit",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdDebugShowUEFIExit, PcdGet32 (PcdDebugShowUEFIExit));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"DisplayEnableVModes",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdDisplayEnableVModes, PcdGet32 (PcdDisplayEnableVModes));
+ }
+
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"DisplayEnableSShot",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdDisplayEnableSShot, PcdGet32 (PcdDisplayEnableSShot));
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+STATIC VOID
+ApplyVariables (
+ VOID
+ )
+{
+ UINTN Gpio34Group;
+ UINTN Gpio48Group;
+ EFI_STATUS Status;
+ UINT32 CpuClock = PcdGet32 (PcdCpuClock);
+ UINT32 Rate = 0;
+
+ if (CpuClock != 0) {
+ if (CpuClock == 2) {
+ /*
+ * Maximum: 1.2GHz on RPi 3, 1.4GHz on RPi 3B+, unless
+ * overridden with arm_freq=xxx in config.txt.
+ */
+ Status = mFwProtocol->GetMaxClockRate(RPI_FW_CLOCK_RATE_ARM, &Rate);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "Couldn't get the max CPU speed, leaving as is: %r\n",
+ Status));
+ }
+ } else {
+ Rate = 600 * 1000000;
+ }
+ }
+
+ if (Rate != 0) {
+ DEBUG((DEBUG_INFO, "Setting CPU speed to %uHz\n", Rate));
+ Status = mFwProtocol->SetClockRate(RPI_FW_CLOCK_RATE_ARM, Rate);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "Couldn't set the CPU speed: %r\n",
+ Status));
+ }
+ }
+
+ Status = mFwProtocol->GetClockRate(RPI_FW_CLOCK_RATE_ARM, &Rate);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "Couldn't get the CPU speed: %r\n",
+ Status));
+ } else {
+ DEBUG((DEBUG_INFO, "Current CPU speed is %uHz\n", Rate));
+ }
+
+ /*
+ * Switching two groups around, so disable both first.
+ *
+ * No, I've not seen a problem, but having a group be
+ * routed to two sets of pins seems like asking for trouble.
+ */
+ GpioPinFuncSet(34, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(35, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(36, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(37, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(38, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(39, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(48, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(49, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(50, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(51, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(52, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(53, GPIO_FSEL_INPUT);
+ if (PcdGet32 (PcdSdIsArasan)) {
+ DEBUG((DEBUG_INFO, "Routing SD to Arasan\n"));
+ Gpio48Group = GPIO_FSEL_ALT3;
+ /*
+ * Route SDIO to SdHost.
+ */
+ Gpio34Group = GPIO_FSEL_ALT0;
+ } else {
+ DEBUG((DEBUG_INFO, "Routing SD to SdHost\n"));
+ Gpio48Group = GPIO_FSEL_ALT0;
+ /*
+ * Route SDIO to Arasan.
+ */
+ Gpio34Group = GPIO_FSEL_ALT3;
+ }
+ GpioPinFuncSet(34, Gpio34Group);
+ GpioPinFuncSet(35, Gpio34Group);
+ GpioPinFuncSet(36, Gpio34Group);
+ GpioPinFuncSet(37, Gpio34Group);
+ GpioPinFuncSet(38, Gpio34Group);
+ GpioPinFuncSet(39, Gpio34Group);
+ GpioPinFuncSet(48, Gpio48Group);
+ GpioPinFuncSet(49, Gpio48Group);
+ GpioPinFuncSet(50, Gpio48Group);
+ GpioPinFuncSet(51, Gpio48Group);
+ GpioPinFuncSet(52, Gpio48Group);
+ GpioPinFuncSet(53, Gpio48Group);
+
+ /*
+ * JTAG pin JTAG sig GPIO Mode Header pin
+ * 1 VREF N/A 1
+ * 3 nTRST GPIO22 ALT4 15
+ * 4 GND N/A 9
+ * 5 TDI GPIO4 ALT5 7
+ * 7 TMS GPIO27 ALT4 13
+ * 9 TCK GPIO25 ALT4 22
+ * 11 RTCK GPIO23 ALT4 16
+ * 13 TDO GPIO24 ALT4 18
+ */
+ if (PcdGet32 (PcdDebugEnableJTAG)) {
+ GpioPinFuncSet(22, GPIO_FSEL_ALT4);
+ GpioPinFuncSet(4, GPIO_FSEL_ALT5);
+ GpioPinFuncSet(27, GPIO_FSEL_ALT4);
+ GpioPinFuncSet(25, GPIO_FSEL_ALT4);
+ GpioPinFuncSet(23, GPIO_FSEL_ALT4);
+ GpioPinFuncSet(24, GPIO_FSEL_ALT4);
+ } else {
+ GpioPinFuncSet(22, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(4, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(27, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(25, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(23, GPIO_FSEL_INPUT);
+ GpioPinFuncSet(24, GPIO_FSEL_INPUT);
+ }
+}
+
+
+EFI_STATUS
+EFIAPI
+ConfigInitialize(
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid,
+ NULL, (VOID **)&mFwProtocol);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = SetupVariables();
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "Couldn't not setup NV vars: %r\n",
+ Status));
+ }
+
+ ApplyVariables();
+ Status = gBS->InstallProtocolInterface (&ImageHandle,
+ &gRaspberryPiConfigAppliedProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL);
+ ASSERT_EFI_ERROR (Status);
+
+ Status = InstallHiiPages();
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "Couldn't install ConfigDxe configuration pages: %r\n",
+ Status));
+ }
+
+ return EFI_SUCCESS;
+}
+
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf
new file mode 100644
index 000000000000..1eb429de1ae0
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf
@@ -0,0 +1,81 @@
+#/** @file
+#
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ConfigDxe
+ FILE_GUID = 755cbac2-b23f-4b92-bc8e-fb01ce5907b7
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = ConfigInitialize
+
+#
+# The following information is for reference only and not required by the build
+# tools.
+#
+# VALID_ARCHITECTURES = AARCH64
+#
+
+[Sources]
+ ConfigDxe.c
+ ConfigDxeHii.vfr
+ ConfigDxeHii.uni
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ DxeServicesTableLib
+ PcdLib
+ UefiBootServicesTableLib
+ UefiRuntimeServicesTableLib
+ UefiDriverEntryPoint
+ HiiLib
+ GpioLib
+
+[Guids]
+ gConfigDxeFormSetGuid
+
+[Protocols]
+ gRaspberryPiFirmwareProtocolGuid ## CONSUMES
+ gRaspberryPiConfigAppliedProtocolGuid ## PRODUCES
+
+[Pcd]
+ gRaspberryPiTokenSpaceGuid.PcdHypEnable
+ gRaspberryPiTokenSpaceGuid.PcdHypLogMask
+ gRaspberryPiTokenSpaceGuid.PcdHypWindowsDebugHook
+ gRaspberryPiTokenSpaceGuid.PcdHypWin2000Mask
+ gRaspberryPiTokenSpaceGuid.PcdCpuClock
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan
+ gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit
+ gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz
+ gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti
+ gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG
+ gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot
+
+[FeaturePcd]
+
+[Depex]
+ gPcdProtocolGuid AND gRaspberryPiFirmwareProtocolGuid
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeFormSetGuid.h b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeFormSetGuid.h
new file mode 100644
index 000000000000..b29ae3a42461
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeFormSetGuid.h
@@ -0,0 +1,23 @@
+/** @file
+ *
+ * Copyright (c) 2018 Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef CONFIGDXE_FORM_SET_GUID_H
+#define CONFIGDXE_FORM_SET_GUID_H
+
+#define CONFIGDXE_FORM_SET_GUID \
+ {0xCD7CC258, 0x31DB, 0x22E6, {0x9F, 0x22, 0x63, 0xB0, 0xB8, 0xEE, 0xD6, 0xB5}}
+
+extern EFI_GUID gConfigDxeFormSetGuid;
+
+#endif /* CONFIGDXE_FORM_SET_GUID_H */
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.uni b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.uni
new file mode 100644
index 000000000000..bf09261d5e4a
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.uni
@@ -0,0 +1,100 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#langdef en-US "English"
+
+#string STR_NULL_STRING #language en-US ""
+
+#string STR_FORM_SET_TITLE #language en-US "Raspberry Pi Configuration"
+#string STR_FORM_SET_TITLE_HELP #language en-US "Press <Enter> to configure system settings."
+
+/*
+ * Chipset config.
+ */
+
+#string STR_CHIPSET_FORM_TITLE #language en-US "Chipset Configuration"
+#string STR_CHIPSET_FORM_SUBTITLE #language en-US "Note: OS may override settings when booted."
+
+#string STR_CHIPSET_CLOCK_CPU_PROMPT #language en-US "CPU Clock"
+#string STR_CHIPSET_CLOCK_CPU_HELP #language en-US "CPU Speed"
+#string STR_CHIPSET_CLOCK_CPU_NA #language en-US "Don't Override"
+#string STR_CHIPSET_CLOCK_CPU_600MHZ #language en-US "Min (600MHz)"
+#string STR_CHIPSET_CLOCK_CPU_MAX #language en-US "Max"
+
+#string STR_CHIPSET_SD_PROMPT #language en-US "uSD Routing"
+#string STR_CHIPSET_SD_HELP #language en-US "Choose host controller to drive uSD slot"
+#string STR_CHIPSET_SD_SDHOST #language en-US "Broadcom SDHOST"
+#string STR_CHIPSET_SD_ARASAN #language en-US "Arasan SDHCI"
+
+/*
+ * MMC/SD configuration.
+ */
+
+#string STR_MMC_FORM_TITLE #language en-US "SD/MMC Tweaks"
+#string STR_MMC_FORM_SUBTITLE #language en-US "Note: UEFI only, OS will override settings when booted."
+
+#string STR_MMC_DISMULTI_PROMPT #language en-US "Multi-Block Support"
+#string STR_MMC_DISMULTI_HELP #language en-US "Use CMD18/CMD25 for transfers when possible"
+#string STR_MMC_DISMULTI_N #language en-US "Multi-block transfers"
+#string STR_MMC_DISMULTI_Y #language en-US "Single-block transfers"
+
+#string STR_MMC_FORCE1BIT_PROMPT #language en-US "uSD Max Bus Width"
+#string STR_MMC_FORCE1BIT_HELP #language en-US "Tweak for bad media"
+#string STR_MMC_FORCE1BIT_Y #language en-US "1 Bit Mode"
+#string STR_MMC_FORCE1BIT_N #language en-US "4 Bit Mode"
+
+#string STR_MMC_FORCEDS_PROMPT #language en-US "uSD Force Default Speed"
+#string STR_MMC_FORCEDS_HELP #language en-US "Tweak for bad media"
+#string STR_MMC_FORCEDS_Y #language en-US "Force Default Speed"
+#string STR_MMC_FORCEDS_N #language en-US "Allow High Speed"
+
+#string STR_MMC_SD_DS_PROMPT #language en-US "SD Default Speed (MHz)"
+#string STR_MMC_SD_DS_HELP #language en-US "Override default 25Mhz"
+
+#string STR_MMC_SD_HS_PROMPT #language en-US "SD High Speed (MHz)"
+#string STR_MMC_SD_HS_HELP #language en-US "Override default 50Mhz"
+
+
+/*
+ * Display settings.
+ */
+
+#string STR_DISPLAY_FORM_TITLE #language en-US "Display"
+#string STR_DISPLAY_FORM_SUBTITLE #language en-US "UEFI video driver settings"
+
+#string STR_DISPLAY_VMODES_PROMPT #language en-US "Resolutions"
+#string STR_DISPLAY_VMODES_HELP #language en-US "Support for non-native modes"
+#string STR_DISPLAY_VMODES_ENABLE #language en-US "Also support 640x480, 800x600, 1024x768, 720p and 1080p"
+#string STR_DISPLAY_VMODES_DISABLE #language en-US "Only native resolution"
+
+#string STR_DISPLAY_SSHOT_PROMPT #language en-US "Screenshot Support"
+#string STR_DISPLAY_SSHOT_HELP #language en-US "Save screen capture as a BMP on the first writable file system found"
+#string STR_DISPLAY_SSHOT_ENABLE #language en-US "Control-Alt-F12"
+#string STR_DISPLAY_SSHOT_DISABLE #language en-US "Not Enabled"
+
+/*
+ * Debugging settings go here.
+ */
+#string STR_DEBUG_FORM_TITLE #language en-US "Debugging"
+#string STR_DEBUG_FORM_SUBTITLE #language en-US "For UEFI/OS Developers"
+
+#string STR_DEBUG_JTAG_PROMPT #language en-US "JTAG Routing"
+#string STR_DEBUG_JTAG_HELP #language en-US "Signals (nTRST, TDI, TMS, TCK, RTCK, TDO) -> Header pins (15, 7, 13, 22, 16, 18)"
+#string STR_DEBUG_JTAG_ENABLE #language en-US "Enable JTAG via GPIO"
+#string STR_DEBUG_JTAG_DISABLE #language en-US "Disable JTAG"
+
+#string STR_DEBUG_EXIT_SHOW_PROMPT #language en-US "Verbose ExitBootServices"
+#string STR_DEBUG_EXIT_SHOW_HELP #language en-US "Show message when UEFI hands off to OS"
+#string STR_DEBUG_EXIT_SHOW_NO #language en-US "Do nothing"
+#string STR_DEBUG_EXIT_SHOW_YES #language en-US "Show farewell message"
diff --git a/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.vfr b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.vfr
new file mode 100644
index 000000000000..d3d98acc2edf
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.vfr
@@ -0,0 +1,306 @@
+/** @file
+ *
+ * Copyright (c) 2018 Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Guid/HiiPlatformSetupFormset.h>
+#include "ConfigDxeFormSetGuid.h"
+
+typedef struct {
+ /*
+ * 0 - One mode for the boot resolution.
+ * 1 - Adds additional "typical" resolutions like
+ * 640x480, 800x600, 1024 x 768, 720p and 1080p.
+ */
+ UINT32 Enable;
+} DISPLAY_ENABLE_VMODES_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - No screenshot support.
+ * 1 - Screenshot support via hotkey.
+ */
+ UINT32 Enable;
+} DISPLAY_ENABLE_SSHOT_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - No JTAG.
+ * 1 - JTAG mode.
+ */
+ UINT32 Enable;
+} DEBUG_ENABLE_JTAG_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - Don't show UEFI exit message.
+ * 1 - Show UEFI exit message.
+ */
+ UINT32 Show;
+} DEBUG_SHOW_UEFI_EXIT_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - don't change the clock rate.
+ * 1 - 600MHz.
+ * 2 - maximum.
+ */
+ UINT32 Clock;
+} CHIPSET_CPU_CLOCK_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - uSD slot routed to Broadcom SDHOST.
+ * 1 - uSD slot routed to Arasan SDHCI.
+ */
+ UINT32 Routing;
+} CHIPSET_SD_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - Don't disable multi-block.
+ * 1 - Disable multi-block commands.
+ */
+ UINT32 DisableMulti;
+} MMC_DISMULTI_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - Don't force 1 bit mode.
+ * 1 - Force 1 bit mode.
+ */
+ UINT32 Force1Bit;
+} MMC_FORCE1BIT_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * 0 - Don't force default speed.
+ * 1 - Force default speed.
+ */
+ UINT32 ForceDS;
+} MMC_FORCEDS_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * Default Speed MHz override (25MHz default).
+ */
+ UINT32 MHz;
+} MMC_SD_DS_MHZ_VARSTORE_DATA;
+
+typedef struct {
+ /*
+ * High Speed MHz override (50MHz default).
+ */
+ UINT32 MHz;
+} MMC_SD_HS_MHZ_VARSTORE_DATA;
+
+//
+// EFI Variable attributes
+//
+#define EFI_VARIABLE_NON_VOLATILE 0x00000001
+#define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x00000002
+#define EFI_VARIABLE_RUNTIME_ACCESS 0x00000004
+#define EFI_VARIABLE_READ_ONLY 0x00000008
+
+formset
+ guid = CONFIGDXE_FORM_SET_GUID,
+ title = STRING_TOKEN(STR_FORM_SET_TITLE),
+ help = STRING_TOKEN(STR_FORM_SET_TITLE_HELP),
+ classguid = EFI_HII_PLATFORM_SETUP_FORMSET_GUID,
+
+ efivarstore CHIPSET_CPU_CLOCK_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = CpuClock,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore CHIPSET_SD_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = SdIsArasan,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore MMC_DISMULTI_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = MmcDisableMulti,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore MMC_FORCE1BIT_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = MmcForce1Bit,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore MMC_FORCEDS_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = MmcForceDefaultSpeed,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore MMC_SD_DS_MHZ_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = MmcSdDefaultSpeedMHz,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore MMC_SD_HS_MHZ_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = MmcSdHighSpeedMHz,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore DEBUG_ENABLE_JTAG_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = DebugEnableJTAG,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore DEBUG_SHOW_UEFI_EXIT_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = DebugShowUEFIExit,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore DISPLAY_ENABLE_VMODES_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = DisplayEnableVModes,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ efivarstore DISPLAY_ENABLE_SSHOT_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = DisplayEnableSShot,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
+ form formid = 1,
+ title = STRING_TOKEN(STR_FORM_SET_TITLE);
+ subtitle text = STRING_TOKEN(STR_NULL_STRING);
+
+ goto 0x1002,
+ prompt = STRING_TOKEN(STR_CHIPSET_FORM_TITLE),
+ help = STRING_TOKEN(STR_NULL_STRING);
+
+ goto 0x1003,
+ prompt = STRING_TOKEN(STR_MMC_FORM_TITLE),
+ help = STRING_TOKEN(STR_NULL_STRING);
+
+ goto 0x1004,
+ prompt = STRING_TOKEN(STR_DISPLAY_FORM_TITLE),
+ help = STRING_TOKEN(STR_NULL_STRING);
+
+ goto 0x1005,
+ prompt = STRING_TOKEN(STR_DEBUG_FORM_TITLE),
+ help = STRING_TOKEN(STR_NULL_STRING);
+ endform;
+
+ form formid = 0x1002,
+ title = STRING_TOKEN(STR_CHIPSET_FORM_TITLE);
+ subtitle text = STRING_TOKEN(STR_CHIPSET_FORM_SUBTITLE);
+
+ oneof varid = CpuClock.Clock,
+ prompt = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_PROMPT),
+ help = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_NA), value = 0, flags = DEFAULT;
+ option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_600MHZ), value = 1, flags = 0;
+ option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_MAX), value = 2, flags = 0;
+ endoneof;
+
+ oneof varid = SdIsArasan.Routing,
+ prompt = STRING_TOKEN(STR_CHIPSET_SD_PROMPT),
+ help = STRING_TOKEN(STR_CHIPSET_SD_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_CHIPSET_SD_ARASAN), value = 1, flags = 0;
+ option text = STRING_TOKEN(STR_CHIPSET_SD_SDHOST), value = 0, flags = DEFAULT;
+ endoneof;
+ endform;
+
+ form formid = 0x1003,
+ title = STRING_TOKEN(STR_MMC_FORM_TITLE);
+ subtitle text = STRING_TOKEN(STR_MMC_FORM_SUBTITLE);
+
+ oneof varid = MmcDisableMulti.DisableMulti,
+ prompt = STRING_TOKEN(STR_MMC_DISMULTI_PROMPT),
+ help = STRING_TOKEN(STR_MMC_DISMULTI_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_MMC_DISMULTI_N), value = 0, flags = DEFAULT;
+ option text = STRING_TOKEN(STR_MMC_DISMULTI_Y), value = 1, flags = 0;
+ endoneof;
+
+ oneof varid = MmcForce1Bit.Force1Bit,
+ prompt = STRING_TOKEN(STR_MMC_FORCE1BIT_PROMPT),
+ help = STRING_TOKEN(STR_MMC_FORCE1BIT_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_MMC_FORCE1BIT_N), value = 0, flags = DEFAULT;
+ option text = STRING_TOKEN(STR_MMC_FORCE1BIT_Y), value = 1, flags = 0;
+ endoneof;
+
+ oneof varid = MmcForceDefaultSpeed.ForceDS,
+ prompt = STRING_TOKEN(STR_MMC_FORCEDS_PROMPT),
+ help = STRING_TOKEN(STR_MMC_FORCEDS_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_MMC_FORCEDS_N), value = 0, flags = DEFAULT;
+ option text = STRING_TOKEN(STR_MMC_FORCEDS_Y), value = 1, flags = 0;
+ endoneof;
+
+ numeric varid = MmcSdDefaultSpeedMHz.MHz,
+ prompt = STRING_TOKEN(STR_MMC_SD_DS_PROMPT),
+ help = STRING_TOKEN(STR_MMC_SD_DS_HELP),
+ flags = DISPLAY_UINT_DEC | NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ minimum = 25,
+ maximum = 100,
+ default = 25,
+ endnumeric;
+
+ numeric varid = MmcSdHighSpeedMHz.MHz,
+ prompt = STRING_TOKEN(STR_MMC_SD_HS_PROMPT),
+ help = STRING_TOKEN(STR_MMC_SD_HS_HELP),
+ flags = DISPLAY_UINT_DEC | NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ minimum = 50,
+ maximum = 100,
+ default = 50,
+ endnumeric;
+ endform;
+
+ form formid = 0x1004,
+ title = STRING_TOKEN(STR_DISPLAY_FORM_TITLE);
+ subtitle text = STRING_TOKEN(STR_DISPLAY_FORM_SUBTITLE);
+
+ oneof varid = DisplayEnableVModes.Enable,
+ prompt = STRING_TOKEN(STR_DISPLAY_VMODES_PROMPT),
+ help = STRING_TOKEN(STR_DISPLAY_VMODES_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_DISPLAY_VMODES_ENABLE), value = 1, flags = DEFAULT;
+ option text = STRING_TOKEN(STR_DISPLAY_VMODES_DISABLE), value = 0, flags = 0;
+ endoneof;
+
+ oneof varid = DisplayEnableSShot.Enable,
+ prompt = STRING_TOKEN(STR_DISPLAY_SSHOT_PROMPT),
+ help = STRING_TOKEN(STR_DISPLAY_SSHOT_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_DISPLAY_SSHOT_ENABLE), value = 1, flags = DEFAULT;
+ option text = STRING_TOKEN(STR_DISPLAY_SSHOT_DISABLE), value = 0, flags = 0;
+ endoneof;
+ endform;
+
+ form formid = 0x1005,
+ title = STRING_TOKEN(STR_DEBUG_FORM_TITLE);
+ subtitle text = STRING_TOKEN(STR_DEBUG_FORM_SUBTITLE);
+
+ oneof varid = DebugEnableJTAG.Enable,
+ prompt = STRING_TOKEN(STR_DEBUG_JTAG_PROMPT),
+ help = STRING_TOKEN(STR_DEBUG_JTAG_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ option text = STRING_TOKEN(STR_DEBUG_JTAG_ENABLE), value = 1, flags = 0;
+ option text = STRING_TOKEN(STR_DEBUG_JTAG_DISABLE), value = 0, flags = DEFAULT;
+ endoneof;
+
+ oneof varid = DebugShowUEFIExit.Show,
+ prompt = STRING_TOKEN(STR_DEBUG_EXIT_SHOW_PROMPT),
+ help = STRING_TOKEN(STR_DEBUG_EXIT_SHOW_HELP),
+ flags = NUMERIC_SIZE_4 | INTERACTIVE,
+ option text = STRING_TOKEN(STR_DEBUG_EXIT_SHOW_NO), value = 0, flags = DEFAULT;
+ option text = STRING_TOKEN(STR_DEBUG_EXIT_SHOW_YES), value = 1, flags = 0;
+ endoneof;
+ endform;
+endformset;
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/ComponentName.c b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/ComponentName.c
new file mode 100644
index 000000000000..e639826c60b1
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/ComponentName.c
@@ -0,0 +1,222 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006-2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "DisplayDxe.h"
+
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+);
+
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gComponentName = {
+ ComponentNameGetDriverName,
+ ComponentNameGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) ComponentNameGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) ComponentNameGetControllerName,
+ "en"
+};
+
+
+STATIC EFI_UNICODE_STRING_TABLE mDriverName[] = {
+ {
+ "eng;en",
+ (CHAR16 *)L"Raspberry Pi Display Driver"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+STATIC EFI_UNICODE_STRING_TABLE mDeviceName[] = {
+ {
+ "eng;en",
+ (CHAR16 *)L"Raspberry Pi Framebuffer"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mDriverName,
+ DriverName,
+ (BOOLEAN)(This == &gComponentName)
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mDeviceName,
+ ControllerName,
+ (BOOLEAN)(This == &gComponentName)
+ );
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.c b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.c
new file mode 100644
index 000000000000..e8b7f67c8870
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.c
@@ -0,0 +1,606 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "DisplayDxe.h"
+
+#define POS_TO_FB(posX, posY) ((UINT8 *) \
+ ((UINTN)This->Mode->FrameBufferBase + \
+ (posY) * This->Mode->Info->PixelsPerScanLine * \
+ PI3_BYTES_PER_PIXEL + \
+ (posX) * PI3_BYTES_PER_PIXEL))
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ );
+
+STATIC
+EFI_STATUS
+EFIAPI
+DisplayQueryMode(
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN UINT32 ModeNumber,
+ OUT UINTN *SizeOfInfo,
+ OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info
+ );
+
+STATIC
+EFI_STATUS
+EFIAPI
+DisplaySetMode(
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN UINT32 ModeNumber
+ );
+
+STATIC
+EFI_STATUS
+EFIAPI
+DisplayBlt(
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL
+ IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation,
+ IN UINTN SourceX,
+ IN UINTN SourceY,
+ IN UINTN DestinationX,
+ IN UINTN DestinationY,
+ IN UINTN Width,
+ IN UINTN Height,
+ IN UINTN Delta OPTIONAL
+ );
+
+STATIC EFI_DRIVER_BINDING_PROTOCOL mDriverBinding = {
+ DriverSupported,
+ DriverStart,
+ DriverStop,
+ 0xa,
+ NULL,
+ NULL
+};
+
+typedef struct {
+ VENDOR_DEVICE_PATH DisplayDevicePath;
+ EFI_DEVICE_PATH EndDevicePath;
+} DISPLAY_DEVICE_PATH;
+
+typedef struct {
+ UINT32 Width;
+ UINT32 Height;
+} GOP_MODE_DATA;
+
+STATIC UINT32 mBootWidth;
+STATIC UINT32 mBootHeight;
+STATIC EFI_HANDLE mDevice;
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+STATIC EFI_CPU_ARCH_PROTOCOL *mCpu;
+
+STATIC UINTN mLastMode;
+STATIC GOP_MODE_DATA mGopModeData[] = {
+ { 800, 600 }, /* Legacy */
+ { 640, 480 }, /* Legacy */
+ { 1024, 768 }, /* Legacy */
+ { 1280, 720 }, /* 720p */
+ { 1920, 1080 }, /* 1080p */
+ { 0, 0 }, /* Physical */
+};
+
+STATIC DISPLAY_DEVICE_PATH mDisplayProtoDevicePath =
+ {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8)(sizeof(VENDOR_DEVICE_PATH)),
+ (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8),
+ }
+ },
+ EFI_CALLER_ID_GUID,
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ sizeof(EFI_DEVICE_PATH_PROTOCOL),
+ 0
+ }
+ }
+ };
+
+#define PI3_BITS_PER_PIXEL (32)
+#define PI3_BYTES_PER_PIXEL (PI3_BITS_PER_PIXEL / 8)
+
+EFI_GRAPHICS_OUTPUT_PROTOCOL gDisplayProto = {
+ DisplayQueryMode,
+ DisplaySetMode,
+ DisplayBlt,
+ NULL
+};
+
+STATIC
+EFI_STATUS
+EFIAPI
+DisplayQueryMode(
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN UINT32 ModeNumber,
+ OUT UINTN *SizeOfInfo,
+ OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info
+ )
+{
+ EFI_STATUS Status;
+ GOP_MODE_DATA *Mode;
+
+ if (ModeNumber > mLastMode) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = gBS->AllocatePool(
+ EfiBootServicesData,
+ sizeof(EFI_GRAPHICS_OUTPUT_MODE_INFORMATION),
+ (VOID **)Info
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Mode = &mGopModeData[ModeNumber];
+
+ *SizeOfInfo = sizeof(EFI_GRAPHICS_OUTPUT_MODE_INFORMATION);
+ (*Info)->Version = This->Mode->Info->Version;
+ (*Info)->HorizontalResolution = Mode->Width;
+ (*Info)->VerticalResolution = Mode->Height;
+ (*Info)->PixelFormat = This->Mode->Info->PixelFormat;
+ (*Info)->PixelsPerScanLine = Mode->Width;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+VOID
+ClearScreen(
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This
+ )
+{
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Fill;
+
+ Fill.Red = 0x00;
+ Fill.Green = 0x00;
+ Fill.Blue = 0x00;
+ This->Blt (This, &Fill, EfiBltVideoFill,
+ 0, 0, 0, 0, This->Mode->Info->HorizontalResolution,
+ This->Mode->Info->VerticalResolution,
+ This->Mode->Info->HorizontalResolution *
+ sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+DisplaySetMode(
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN UINT32 ModeNumber
+ )
+{
+ UINTN FbSize;
+ UINTN FbPitch;
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS FbBase;
+ GOP_MODE_DATA *Mode = &mGopModeData[ModeNumber];
+
+ if (ModeNumber > mLastMode) {
+ return EFI_UNSUPPORTED;
+ }
+
+ DEBUG((DEBUG_INFO, "Setting mode %u from %u: %u x %u\n",
+ ModeNumber, This->Mode->Mode, Mode->Width, Mode->Height));
+ Status = mFwProtocol->GetFB(Mode->Width, Mode->Height,
+ PI3_BITS_PER_PIXEL, &FbBase,
+ &FbSize, &FbPitch);
+ if (EFI_ERROR(Status)) {
+ DEBUG((DEBUG_ERROR, "Could not set mode %u\n", ModeNumber));
+ return EFI_DEVICE_ERROR;
+ }
+
+ DEBUG((DEBUG_INFO, "Mode %u: %u x %u framebuffer is %u bytes at %p\n",
+ ModeNumber, Mode->Width, Mode->Height, FbSize, FbBase));
+
+ if (FbPitch / PI3_BYTES_PER_PIXEL != Mode->Width) {
+ DEBUG((DEBUG_ERROR, "Error: Expected width %u, got width %u\n",
+ Mode->Width, FbPitch / PI3_BYTES_PER_PIXEL));
+ return EFI_DEVICE_ERROR;
+ }
+
+ /*
+ * WT, because certain OS loaders access the frame buffer directly
+ * and we don't want to see corruption due to missing WB cache
+ * maintenance. Performance with WT is good.
+ */
+ Status = mCpu->SetMemoryAttributes(mCpu, FbBase,
+ ALIGN_VALUE(FbSize, EFI_PAGE_SIZE),
+ EFI_MEMORY_WT);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "Couldn't set framebuffer attributes: %r\n", Status));
+ return Status;
+ }
+
+ This->Mode->Mode = ModeNumber;
+ This->Mode->Info->Version = 0;
+ This->Mode->Info->HorizontalResolution = Mode->Width;
+ This->Mode->Info->VerticalResolution = Mode->Height;
+ /*
+ * NOTE: Windows REQUIRES BGR in 32 or 24 bit format.
+ */
+ This->Mode->Info->PixelFormat = PixelBlueGreenRedReserved8BitPerColor;
+ This->Mode->Info->PixelsPerScanLine = Mode->Width;
+ This->Mode->SizeOfInfo = sizeof(*This->Mode->Info);
+ This->Mode->FrameBufferBase = FbBase;
+ This->Mode->FrameBufferSize = FbSize;
+
+ ClearScreen(This);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+DisplayBlt(
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL
+ IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation,
+ IN UINTN SourceX,
+ IN UINTN SourceY,
+ IN UINTN DestinationX,
+ IN UINTN DestinationY,
+ IN UINTN Width,
+ IN UINTN Height,
+ IN UINTN Delta OPTIONAL
+ )
+{
+ UINT8 *VidBuf, *BltBuf, *VidBuf1;
+ UINTN i;
+
+ switch(BltOperation) {
+ case EfiBltVideoFill:
+ BltBuf = (UINT8 *)BltBuffer;
+
+ for (i = 0; i < Height; i++) {
+ VidBuf = POS_TO_FB(DestinationX, DestinationY + i);
+
+ SetMem32(VidBuf, Width * PI3_BYTES_PER_PIXEL, *(UINT32 *) BltBuf);
+ }
+ break;
+
+ case EfiBltVideoToBltBuffer:
+ if (Delta == 0) {
+ Delta = Width * PI3_BYTES_PER_PIXEL;
+ }
+
+ for (i = 0; i < Height; i++) {
+ VidBuf = POS_TO_FB(SourceX, SourceY + i);
+
+ BltBuf = (UINT8 *)((UINTN)BltBuffer + (DestinationY + i) * Delta +
+ DestinationX * PI3_BYTES_PER_PIXEL);
+
+ gBS->CopyMem((VOID *)BltBuf, (VOID *)VidBuf, PI3_BYTES_PER_PIXEL * Width);
+ }
+ break;
+
+ case EfiBltBufferToVideo:
+ if (Delta == 0) {
+ Delta = Width * PI3_BYTES_PER_PIXEL;
+ }
+
+ for (i = 0; i < Height; i++) {
+ VidBuf = POS_TO_FB(DestinationX, DestinationY + i);
+ BltBuf = (UINT8 *)((UINTN) BltBuffer + (SourceY + i) * Delta +
+ SourceX * PI3_BYTES_PER_PIXEL);
+
+ gBS->CopyMem((VOID *)VidBuf, (VOID *)BltBuf, Width * PI3_BYTES_PER_PIXEL);
+ }
+ break;
+
+ case EfiBltVideoToVideo:
+ for (i = 0; i < Height; i++) {
+ VidBuf = POS_TO_FB(SourceX, SourceY + i);
+ VidBuf1 = POS_TO_FB(DestinationX, DestinationY + i);
+
+ gBS->CopyMem((VOID *)VidBuf1, (VOID *)VidBuf, Width * PI3_BYTES_PER_PIXEL);
+ }
+ break;
+
+ default:
+ ASSERT_EFI_ERROR(EFI_SUCCESS);
+ break;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize the state information for the Display Dxe
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+EFIAPI
+DisplayDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
+ (VOID **)&mFwProtocol);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL,
+ (VOID **) &mCpu);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Query the current display resolution from mailbox
+ Status = mFwProtocol->GetFBSize(&mBootWidth, &mBootHeight);
+ if(EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ DEBUG((DEBUG_INFO, "Display boot mode is %u x %u\n",
+ mBootWidth, mBootHeight));
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mDevice, &gEfiDevicePathProtocolGuid,
+ &mDisplayProtoDevicePath, &gEfiCallerIdGuid,
+ NULL, NULL);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &mDriverBinding,
+ ImageHandle,
+ &gComponentName,
+ &gComponentName2
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ VOID *Temp;
+
+ if (Controller != mDevice) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (gBS->HandleProtocol(Controller, &gEfiGraphicsOutputProtocolGuid,
+ (VOID **) &Temp) == EFI_SUCCESS) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ UINTN Index;
+ EFI_STATUS Status;
+ VOID *Dummy;
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiCallerIdGuid,
+ (VOID **) &Dummy,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ gDisplayProto.Mode = AllocateZeroPool(sizeof(EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE));
+ if (gDisplayProto.Mode == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto done;
+ }
+
+ gDisplayProto.Mode->Info = AllocateZeroPool(sizeof(EFI_GRAPHICS_OUTPUT_MODE_INFORMATION));
+ if (gDisplayProto.Mode->Info == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto done;
+ }
+
+
+ if (PcdGet32(PcdDisplayEnableVModes)) {
+ mLastMode = ELES(mGopModeData) - 1;
+ } else {
+ mLastMode = 0;
+ /*
+ * mBootWidth x mBootHeight may not be sensible,
+ * so clean it up, since we won't be adding
+ * any other extra vmodes.
+ */
+ if (mBootWidth < 640 ||
+ mBootHeight < 480) {
+ mBootWidth = 640;
+ mBootHeight = 480;
+ }
+ }
+
+ mGopModeData[mLastMode].Width = mBootWidth;
+ mGopModeData[mLastMode].Height = mBootHeight;
+
+ for (Index = 0; Index <= mLastMode; Index++) {
+ UINTN FbSize;
+ UINTN FbPitch;
+ EFI_PHYSICAL_ADDRESS FbBase;
+
+ GOP_MODE_DATA *Mode = &mGopModeData[Index];
+
+ Status = mFwProtocol->GetFB(Mode->Width, Mode->Height,
+ PI3_BITS_PER_PIXEL, &FbBase,
+ &FbSize, &FbPitch);
+ if (EFI_ERROR(Status)) {
+ goto done;
+ }
+
+ //
+ // There is no way to communicate pitch back to OS. OS and even UEFI
+ // expect a fully linear frame buffer. So the width should
+ // be based on the frame buffer's pitch value. In some cases VC
+ // firmware would allocate ao frame buffer with some padding
+ // presumably to be 8 byte align.
+ //
+ Mode->Width = FbPitch / PI3_BYTES_PER_PIXEL;
+
+ DEBUG((DEBUG_INFO, "Mode %u: %u x %u framebuffer is %u bytes at %p\n",
+ Index, Mode->Width, Mode->Height, FbSize, FbBase));
+
+ ASSERT (FbPitch != 0);
+ ASSERT (FbBase != 0);
+ ASSERT (FbSize != 0);
+ }
+
+ // Both set the mode and initialize current mode information.
+ gDisplayProto.Mode->MaxMode = mLastMode + 1;
+ DisplaySetMode(&gDisplayProto, 0);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Controller, &gEfiGraphicsOutputProtocolGuid,
+ &gDisplayProto, NULL);
+ if (EFI_ERROR (Status)) {
+ goto done;
+ }
+
+ if (PcdGet32(PcdDisplayEnableSShot)) {
+ RegisterScreenshotHandlers();
+ } else {
+ DEBUG((DEBUG_INFO, "Screenshot capture disabled\n"));
+ }
+
+done:
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "Could not start DisplayDxe: %r\n", Status));
+ if (gDisplayProto.Mode->Info != NULL) {
+ FreePool(gDisplayProto.Mode->Info);
+ gDisplayProto.Mode->Info = NULL;
+ }
+
+ if (gDisplayProto.Mode != NULL) {
+ FreePool(gDisplayProto.Mode);
+ gDisplayProto.Mode = NULL;
+ }
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiCallerIdGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ }
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+
+ ClearScreen(&gDisplayProto);
+
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ Controller, &gEfiGraphicsOutputProtocolGuid,
+ &gDisplayProto, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ FreePool(gDisplayProto.Mode->Info);
+ gDisplayProto.Mode->Info = NULL;
+ FreePool(gDisplayProto.Mode);
+ gDisplayProto.Mode = NULL;
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiCallerIdGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.h b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.h
new file mode 100644
index 000000000000..9fa3d4f6af83
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.h
@@ -0,0 +1,43 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef _DISPLAY_H_
+#define _DISPLAY_H_
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/PcdLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include <Protocol/GraphicsOutput.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/RaspberryPiFirmware.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Protocol/Cpu.h>
+#include <Utils.h>
+
+extern EFI_GRAPHICS_OUTPUT_PROTOCOL gDisplayProto;
+extern EFI_COMPONENT_NAME_PROTOCOL gComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gComponentName2;
+
+VOID
+RegisterScreenshotHandlers(
+ VOID
+ );
+
+#endif /* _DISPLAY_H_ */
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf
new file mode 100644
index 000000000000..1603edd4909d
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf
@@ -0,0 +1,71 @@
+#/** @file
+#
+# Component description file for Graphics Output module
+#
+# Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) Microsoft Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DisplayDxe
+ FILE_GUID = c5deae31-fad2-4030-841b-cfc9644d2c5b
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = DisplayDxeInitialize
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# DRIVER_BINDING = gGraphicsConsoleDriverBinding
+# COMPONENT_NAME = gGraphicsConsoleComponentName
+# COMPONENT_NAME2 = gGraphicsConsoleComponentName2
+#
+
+[Sources]
+ DisplayDxe.c
+ Screenshot.c
+ ComponentName.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ ArmPkg/ArmPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ UefiLib
+ MemoryAllocationLib
+ UefiDriverEntryPoint
+ IoLib
+ TimerLib
+ BmpSupportLib
+ UefiRuntimeServicesTableLib
+
+[Protocols]
+ gEfiLoadedImageProtocolGuid
+ gEfiDevicePathProtocolGuid
+ gEfiGraphicsOutputProtocolGuid
+ gRaspberryPiFirmwareProtocolGuid
+ gEfiCpuArchProtocolGuid
+ gEfiSimpleFileSystemProtocolGuid
+ gEfiSimpleTextInputExProtocolGuid
+
+[Pcd]
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot
+
+[Guids]
+
+[Depex]
+ gEfiCpuArchProtocolGuid AND gRaspberryPiFirmwareProtocolGuid
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/Screenshot.c b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/Screenshot.c
new file mode 100644
index 000000000000..a2feeba6084f
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/Screenshot.c
@@ -0,0 +1,379 @@
+/** @file
+ *
+ * Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+/*
+ * Loosely based on CrScreenShotDxe (https://github.com/LongSoft/CrScreenshotDxe).
+ *
+ * Copyright (c) 2016, Nikolaj Schlej, All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "DisplayDxe.h"
+#include <Protocol/SimpleFileSystem.h>
+#include <Library/PrintLib.h>
+#include <Library/BmpSupportLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+/*
+ * ShowStatus defs.
+ */
+#define STATUS_SQUARE_SIDE 5
+#define STATUS_YELLOW 0xff, 0xff, 0x00
+#define STATUS_GREEN 0x00, 0xff, 0x00
+#define STATUS_BLUE 0x00, 0x00, 0xff
+#define STATUS_RED 0xff, 0x00, 0x00
+
+EFI_STATUS
+ShowStatus (
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
+ IN UINT8 Red,
+ IN UINT8 Green,
+ IN UINT8 Blue
+ )
+{
+ UINTN Index;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Square[STATUS_SQUARE_SIDE * STATUS_SQUARE_SIDE];
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Backup[STATUS_SQUARE_SIDE * STATUS_SQUARE_SIDE];
+
+ for (Index = 0 ; Index < STATUS_SQUARE_SIDE * STATUS_SQUARE_SIDE; Index++) {
+ Square[Index].Blue = Blue;
+ Square[Index].Green = Green;
+ Square[Index].Red = Red;
+ Square[Index].Reserved = 0x00;
+ }
+
+ // Backup current image.
+ GraphicsOutput->Blt(GraphicsOutput, Backup,
+ EfiBltVideoToBltBuffer, 0, 0, 0, 0,
+ STATUS_SQUARE_SIDE, STATUS_SQUARE_SIDE, 0);
+
+ // Draw the status square.
+ GraphicsOutput->Blt(GraphicsOutput, Square,
+ EfiBltBufferToVideo, 0, 0, 0, 0,
+ STATUS_SQUARE_SIDE, STATUS_SQUARE_SIDE, 0);
+
+ // Wait 500ms.
+ gBS->Stall(500*1000);
+
+ // Restore the backup.
+ GraphicsOutput->Blt(GraphicsOutput, Backup,
+ EfiBltBufferToVideo, 0, 0, 0, 0,
+ STATUS_SQUARE_SIDE, STATUS_SQUARE_SIDE, 0);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+FindWritableFs (
+ OUT EFI_FILE_PROTOCOL **WritableFs
+ )
+{
+ EFI_FILE_PROTOCOL *Fs = NULL;
+ EFI_HANDLE *HandleBuffer = NULL;
+ UINTN HandleCount;
+ UINTN Index;
+
+ EFI_STATUS Status = gBS->LocateHandleBuffer(ByProtocol,
+ &gEfiSimpleFileSystemProtocolGuid,
+ NULL, &HandleCount, &HandleBuffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ for (Index = 0; Index < HandleCount; Index++) {
+ EFI_SIMPLE_FILE_SYSTEM_PROTOCOL *SimpleFs = NULL;
+ EFI_FILE_PROTOCOL *File = NULL;
+
+ Status = gBS->HandleProtocol(HandleBuffer[Index],
+ &gEfiSimpleFileSystemProtocolGuid,
+ (VOID **) &SimpleFs);
+ if (EFI_ERROR (Status)) {
+ ASSERT_EFI_ERROR (Status);
+ /*
+ * Not supposed to happen.
+ */
+ continue;
+ }
+
+ Status = SimpleFs->OpenVolume(SimpleFs, &Fs);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a OpenVolume[%u] returned %r\n", __FUNCTION__,
+ Index, Status));
+ continue;
+ }
+
+ Status = Fs->Open(Fs, &File, L"--------.---",
+ EFI_FILE_MODE_CREATE | EFI_FILE_MODE_READ |
+ EFI_FILE_MODE_WRITE, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a Open[%u] returned %r\n", __FUNCTION__,
+ Index, Status));
+ continue;
+ }
+
+ /*
+ * Okay, we have a writable filesystem!
+ */
+ Fs->Delete(File);
+ *WritableFs = Fs;
+ Status = EFI_SUCCESS;
+ break;
+ }
+
+ if (HandleBuffer) {
+ FreePool(HandleBuffer);
+ }
+
+ return Status;
+}
+
+STATIC
+VOID
+TakeScreenshot(
+ VOID
+ )
+{
+ VOID *BmpImage = NULL;
+ EFI_FILE_PROTOCOL *Fs = NULL;
+ EFI_FILE_PROTOCOL *File = NULL;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput = &gDisplayProto;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Image = NULL;
+ EFI_STATUS Status;
+ CHAR16 FileName[8+1+3+1];
+ UINT32 ScreenWidth;
+ UINT32 ScreenHeight;
+ UINTN ImageSize;
+ UINTN BmpSize;
+ UINTN Index;
+ EFI_TIME Time;
+
+ Status = FindWritableFs(&Fs);
+ if (EFI_ERROR (Status)) {
+ ShowStatus(GraphicsOutput, STATUS_YELLOW);
+ }
+
+ ScreenWidth = GraphicsOutput->Mode->Info->HorizontalResolution;
+ ScreenHeight = GraphicsOutput->Mode->Info->VerticalResolution;
+ ImageSize = ScreenWidth * ScreenHeight;
+
+ Status = gRT->GetTime(&Time, NULL);
+ if (!EFI_ERROR(Status)) {
+ UnicodeSPrint(FileName, sizeof(FileName), L"%02d%02d%02d%02d.bmp",
+ Time.Day, Time.Hour, Time.Minute, Time.Second);
+ } else {
+ UnicodeSPrint(FileName, sizeof(FileName), L"scrnshot.bmp");
+ }
+
+ Image = AllocatePool(ImageSize * sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
+ if (Image == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ ShowStatus(GraphicsOutput, STATUS_RED);
+ goto done;
+ }
+
+ Status = GraphicsOutput->Blt(GraphicsOutput, Image,
+ EfiBltVideoToBltBuffer, 0, 0, 0, 0,
+ ScreenWidth, ScreenHeight, 0);
+ if (EFI_ERROR(Status)) {
+ ShowStatus(GraphicsOutput, STATUS_RED);
+ goto done;
+ }
+
+ for (Index = 0; Index < ImageSize; Index++) {
+ if (Image[Index].Red != 0x00 ||
+ Image[Index].Green != 0x00 ||
+ Image[Index].Blue != 0x00) {
+ break;
+ }
+ }
+
+ if (Index == ImageSize) {
+ ShowStatus(GraphicsOutput, STATUS_BLUE);
+ goto done;
+ }
+
+ Status = TranslateGopBltToBmp(Image, ScreenHeight, ScreenWidth,
+ &BmpImage, (UINT32 *) &BmpSize);
+ if (EFI_ERROR(Status)) {
+ ShowStatus(GraphicsOutput, STATUS_RED);
+ goto done;
+ }
+
+ Status = Fs->Open(Fs, &File, FileName, EFI_FILE_MODE_CREATE |
+ EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE, 0);
+ if (EFI_ERROR (Status)) {
+ ShowStatus(GraphicsOutput, STATUS_RED);
+ goto done;
+ }
+
+ Status = File->Write(File, &BmpSize, BmpImage);
+ File->Close(File);
+ if (EFI_ERROR (Status)) {
+ ShowStatus(GraphicsOutput, STATUS_RED);
+ goto done;
+ }
+
+ ShowStatus(GraphicsOutput, STATUS_GREEN);
+done:
+ if (BmpImage != NULL) {
+ FreePool (BmpImage);
+ }
+
+ if (Image != NULL) {
+ FreePool (Image);
+ }
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+ScreenshotKeyHandler (
+ IN EFI_KEY_DATA *KeyData
+ )
+{
+ TakeScreenshot();
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+ProcessScreenshotHandler(
+ IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *SimpleTextInEx
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+ EFI_KEY_DATA ScreenshotKey;
+
+ /*
+ * LCtrl+LAlt+F12
+ */
+ ScreenshotKey.Key.ScanCode = SCAN_F12;
+ ScreenshotKey.Key.UnicodeChar = 0;
+ ScreenshotKey.KeyState.KeyShiftState = EFI_SHIFT_STATE_VALID |
+ EFI_LEFT_CONTROL_PRESSED | EFI_LEFT_ALT_PRESSED;
+ ScreenshotKey.KeyState.KeyToggleState = 0;
+
+ Status = SimpleTextInEx->RegisterKeyNotify (
+ SimpleTextInEx,
+ &ScreenshotKey,
+ ScreenshotKeyHandler,
+ &Handle
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: couldn't register key notification: %r\n",
+ __FUNCTION__, Status));
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+VOID
+ProcessScreenshotHandlers(
+ VOID
+ )
+{
+ UINTN Index;
+ EFI_STATUS Status;
+ UINTN HandleCount;
+ EFI_HANDLE *HandleBuffer;
+ EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *SimpleTextInEx;
+
+ Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextInputExProtocolGuid,
+ NULL, &HandleCount, &HandleBuffer);
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ for (Index = 0; Index < HandleCount; Index++) {
+ Status = gBS->HandleProtocol (HandleBuffer[Index],
+ &gEfiSimpleTextInputExProtocolGuid,
+ (VOID **) &SimpleTextInEx);
+ if (EFI_ERROR (Status)) {
+ ASSERT_EFI_ERROR (Status);
+ /*
+ * Not supposed to happen.
+ */
+ continue;
+ }
+
+ Status = ProcessScreenshotHandler(SimpleTextInEx);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ }
+}
+
+STATIC
+VOID
+EFIAPI
+OnTextInExInstall (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ ProcessScreenshotHandlers();
+}
+
+VOID
+RegisterScreenshotHandlers(
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT TextInExInstallEvent;
+ VOID *TextInExInstallRegistration;
+
+ ProcessScreenshotHandlers();
+
+ Status = gBS->CreateEvent(EVT_NOTIFY_SIGNAL, TPL_CALLBACK,
+ OnTextInExInstall, NULL,
+ &TextInExInstallEvent);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: couldn't create protocol install event: %r\n",
+ __FUNCTION__, Status));
+ return;
+ }
+
+ Status = gBS->RegisterProtocolNotify(&gEfiSimpleTextInputExProtocolGuid,
+ TextInExInstallEvent,
+ &TextInExInstallRegistration);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: couldn't register protocol install notify: %r\n",
+ __FUNCTION__, Status));
+ return;
+ }
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/ComponentName.c b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/ComponentName.c
new file mode 100644
index 000000000000..e5935b19a250
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/ComponentName.c
@@ -0,0 +1,183 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006-2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "GraphicsConsole.h"
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gGraphicsConsoleComponentName = {
+ GraphicsConsoleComponentNameGetDriverName,
+ GraphicsConsoleComponentNameGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gGraphicsConsoleComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) GraphicsConsoleComponentNameGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) GraphicsConsoleComponentNameGetControllerName,
+ "en"
+};
+
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mGraphicsConsoleDriverNameTable[] = {
+ {
+ "eng;en",
+ (CHAR16 *)L"Graphics Console Driver"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mGraphicsConsoleDriverNameTable,
+ DriverName,
+ (BOOLEAN)(This == &gGraphicsConsoleComponentName)
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ return EFI_UNSUPPORTED;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.c b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.c
new file mode 100644
index 000000000000..4df5b37e5d4f
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.c
@@ -0,0 +1,1836 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006-2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "GraphicsConsole.h"
+
+//
+// Graphics Console Device Private Data template
+//
+GRAPHICS_CONSOLE_DEV mGraphicsConsoleDevTemplate = {
+ GRAPHICS_CONSOLE_DEV_SIGNATURE,
+ (EFI_GRAPHICS_OUTPUT_PROTOCOL *) NULL,
+ {
+ GraphicsConsoleConOutReset,
+ GraphicsConsoleConOutOutputString,
+ GraphicsConsoleConOutTestString,
+ GraphicsConsoleConOutQueryMode,
+ GraphicsConsoleConOutSetMode,
+ GraphicsConsoleConOutSetAttribute,
+ GraphicsConsoleConOutClearScreen,
+ GraphicsConsoleConOutSetCursorPosition,
+ GraphicsConsoleConOutEnableCursor,
+ (EFI_SIMPLE_TEXT_OUTPUT_MODE *) NULL
+ },
+ {
+ 0,
+ -1,
+ EFI_TEXT_ATTR(EFI_LIGHTGRAY, EFI_BLACK),
+ 0,
+ 0,
+ TRUE
+ },
+ (GRAPHICS_CONSOLE_MODE_DATA *) NULL,
+ (EFI_GRAPHICS_OUTPUT_BLT_PIXEL *) NULL,
+ {
+ (EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *) NULL,
+ (EFI_GRAPHICS_OUTPUT_PROTOCOL *) NULL,
+ TRUE,
+ }
+};
+
+GRAPHICS_CONSOLE_MODE_DATA mGraphicsConsoleModeData[] = {
+ {100, 31},
+ //
+ // New modes can be added here.
+ // The last entry is specific for full screen mode.
+ //
+ {0, 0}
+};
+
+EFI_HII_DATABASE_PROTOCOL *mHiiDatabase;
+EFI_HII_FONT_PROTOCOL *mHiiFont;
+EFI_HII_HANDLE mHiiHandle;
+VOID *mHiiRegistration;
+
+EFI_GUID mFontPackageListGuid = {0xf5f219d3, 0x7006, 0x4648, {0xac, 0x8d, 0xd6, 0x1d, 0xfb, 0x7b, 0xc6, 0xad}};
+
+CHAR16 mCrLfString[3] = { CHAR_CARRIAGE_RETURN, CHAR_LINEFEED, CHAR_NULL };
+
+EFI_GRAPHICS_OUTPUT_BLT_PIXEL mGraphicsEfiColors[16] = {
+ //
+ // B G R reserved
+ //
+ {0x00, 0x00, 0x00, 0x00}, // BLACK
+ {0x98, 0x00, 0x00, 0x00}, // LIGHTBLUE
+ {0x00, 0x98, 0x00, 0x00}, // LIGHGREEN
+ {0x98, 0x98, 0x00, 0x00}, // LIGHCYAN
+ {0x00, 0x00, 0x98, 0x00}, // LIGHRED
+ {0x98, 0x00, 0x98, 0x00}, // MAGENTA
+ {0x00, 0x98, 0x98, 0x00}, // BROWN
+ {0x98, 0x98, 0x98, 0x00}, // LIGHTGRAY
+ {0x30, 0x30, 0x30, 0x00}, // DARKGRAY - BRIGHT BLACK
+ {0xff, 0x00, 0x00, 0x00}, // BLUE
+ {0x00, 0xff, 0x00, 0x00}, // LIME
+ {0xff, 0xff, 0x00, 0x00}, // CYAN
+ {0x00, 0x00, 0xff, 0x00}, // RED
+ {0xff, 0x00, 0xff, 0x00}, // FUCHSIA
+ {0x00, 0xff, 0xff, 0x00}, // YELLOW
+ {0xff, 0xff, 0xff, 0x00} // WHITE
+};
+
+EFI_NARROW_GLYPH mCursorGlyph = {
+ 0x0000,
+ 0x00,
+ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF }
+};
+
+CHAR16 SpaceStr[] = { NARROW_CHAR, ' ', 0 };
+
+EFI_DRIVER_BINDING_PROTOCOL gGraphicsConsoleDriverBinding = {
+ GraphicsConsoleControllerDriverSupported,
+ GraphicsConsoleControllerDriverStart,
+ GraphicsConsoleControllerDriverStop,
+ 0xa,
+ NULL,
+ NULL
+};
+
+/**
+ Test to see if Graphics Console could be supported on the Controller.
+
+ Graphics Console could be supported if Graphics Output Protocol
+ exists on the Controller.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to test.
+ @param RemainingDevicePath Optional parameter use to pick a specific child
+ device to start.
+
+ @retval EFI_SUCCESS This driver supports this device.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleControllerDriverSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ GraphicsOutput = NULL;
+ //
+ // Open the IO Abstraction(s) needed to perform the supported test
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiGraphicsOutputProtocolGuid,
+ (VOID **) &GraphicsOutput,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ ASSERT (GraphicsOutput != NULL);
+
+ //
+ // We need to ensure that we do not layer on top of a virtual handle.
+ // We need to ensure that the handles produced by the conspliter do not
+ // get used.
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &DevicePath,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (!EFI_ERROR (Status)) {
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ } else {
+ goto Error;
+ }
+
+ //
+ // Does Hii Exist? If not, we aren't ready to run
+ //
+ Status = EfiLocateHiiProtocol ();
+
+ //
+ // Close the I/O Abstraction(s) used to perform the supported test
+ //
+Error:
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiGraphicsOutputProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ return Status;
+}
+
+/**
+ Initialize all the text modes which the graphics console supports.
+
+ It returns information for available text modes that the graphics can support.
+
+ @param[in] HorizontalResolution The size of video screen in pixels in the X dimension.
+ @param[in] VerticalResolution The size of video screen in pixels in the Y dimension.
+ @param[in] GopModeNumber The graphics mode number which graphis console is based on.
+ @param[out] TextModeCount The total number of text modes that graphics console supports.
+ @param[out] TextModeData The buffer to the text modes column and row information.
+ Caller is responsible to free it when it's non-NULL.
+
+ @retval EFI_SUCCESS The supporting mode information is returned.
+ @retval EFI_INVALID_PARAMETER The parameters are invalid.
+
+**/
+EFI_STATUS
+InitializeGraphicsConsoleTextMode (
+ IN UINT32 HorizontalResolution,
+ IN UINT32 VerticalResolution,
+ IN UINT32 GopModeNumber,
+ OUT UINTN *TextModeCount,
+ OUT GRAPHICS_CONSOLE_MODE_DATA **TextModeData
+ )
+{
+ UINTN Index;
+ UINTN Count;
+ GRAPHICS_CONSOLE_MODE_DATA *ModeBuffer;
+ GRAPHICS_CONSOLE_MODE_DATA *NewModeBuffer;
+ UINTN ValidCount;
+ UINTN ValidIndex;
+ UINTN MaxColumns;
+ UINTN MaxRows;
+
+ if ((TextModeCount == NULL) || (TextModeData == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Count = sizeof (mGraphicsConsoleModeData) / sizeof (GRAPHICS_CONSOLE_MODE_DATA);
+
+ //
+ // Compute the maximum number of text Rows and Columns that this current graphics mode can support.
+ // To make graphics console work well, MaxColumns and MaxRows should not be zero.
+ //
+ MaxColumns = HorizontalResolution / EFI_GLYPH_WIDTH;
+ MaxRows = VerticalResolution / EFI_GLYPH_HEIGHT;
+
+ //
+ // According to UEFI spec, all output devices support at least 80x25 text mode.
+ //
+ ASSERT ((MaxColumns >= 80) && (MaxRows >= 25));
+
+ //
+ // Add full screen mode to the last entry.
+ //
+ mGraphicsConsoleModeData[Count - 1].Columns = MaxColumns;
+ mGraphicsConsoleModeData[Count - 1].Rows = MaxRows;
+
+ //
+ // Get defined mode buffer pointer.
+ //
+ ModeBuffer = mGraphicsConsoleModeData;
+
+ //
+ // Here we make sure that the final mode exposed does not include the duplicated modes,
+ // and does not include the invalid modes which exceed the max column and row.
+ // Reserve 2 modes for 80x25, 80x50 of graphics console.
+ //
+ NewModeBuffer = AllocateZeroPool (sizeof (GRAPHICS_CONSOLE_MODE_DATA) * (Count + 2));
+ ASSERT (NewModeBuffer != NULL);
+
+ //
+ // Mode 0 and mode 1 is for 80x25, 80x50 according to UEFI spec.
+ //
+ ValidCount = 0;
+
+ NewModeBuffer[ValidCount].Columns = 80;
+ NewModeBuffer[ValidCount].Rows = 25;
+ NewModeBuffer[ValidCount].GopWidth = HorizontalResolution;
+ NewModeBuffer[ValidCount].GopHeight = VerticalResolution;
+ NewModeBuffer[ValidCount].GopModeNumber = GopModeNumber;
+ NewModeBuffer[ValidCount].DeltaX = (HorizontalResolution - (NewModeBuffer[ValidCount].Columns * EFI_GLYPH_WIDTH)) >> 1;
+ NewModeBuffer[ValidCount].DeltaY = (VerticalResolution - (NewModeBuffer[ValidCount].Rows * EFI_GLYPH_HEIGHT)) >> 1;
+ ValidCount++;
+
+ if ((MaxColumns >= 80) && (MaxRows >= 50)) {
+ NewModeBuffer[ValidCount].Columns = 80;
+ NewModeBuffer[ValidCount].Rows = 50;
+ NewModeBuffer[ValidCount].DeltaX = (HorizontalResolution - (80 * EFI_GLYPH_WIDTH)) >> 1;
+ NewModeBuffer[ValidCount].DeltaY = (VerticalResolution - (50 * EFI_GLYPH_HEIGHT)) >> 1;
+ }
+ NewModeBuffer[ValidCount].GopWidth = HorizontalResolution;
+ NewModeBuffer[ValidCount].GopHeight = VerticalResolution;
+ NewModeBuffer[ValidCount].GopModeNumber = GopModeNumber;
+ ValidCount++;
+
+ //
+ // Start from mode 2 to put the valid mode other than 80x25 and 80x50 in the output mode buffer.
+ //
+ for (Index = 0; Index < Count; Index++) {
+ if ((ModeBuffer[Index].Columns == 0) || (ModeBuffer[Index].Rows == 0) ||
+ (ModeBuffer[Index].Columns > MaxColumns) || (ModeBuffer[Index].Rows > MaxRows)) {
+ //
+ // Skip the pre-defined mode which is invalid or exceeds the max column and row.
+ //
+ continue;
+ }
+ for (ValidIndex = 0; ValidIndex < ValidCount; ValidIndex++) {
+ if ((ModeBuffer[Index].Columns == NewModeBuffer[ValidIndex].Columns) &&
+ (ModeBuffer[Index].Rows == NewModeBuffer[ValidIndex].Rows)) {
+ //
+ // Skip the duplicated mode.
+ //
+ break;
+ }
+ }
+ if (ValidIndex == ValidCount) {
+ NewModeBuffer[ValidCount].Columns = ModeBuffer[Index].Columns;
+ NewModeBuffer[ValidCount].Rows = ModeBuffer[Index].Rows;
+ NewModeBuffer[ValidCount].GopWidth = HorizontalResolution;
+ NewModeBuffer[ValidCount].GopHeight = VerticalResolution;
+ NewModeBuffer[ValidCount].GopModeNumber = GopModeNumber;
+ NewModeBuffer[ValidCount].DeltaX = (HorizontalResolution - (NewModeBuffer[ValidCount].Columns * EFI_GLYPH_WIDTH)) >> 1;
+ NewModeBuffer[ValidCount].DeltaY = (VerticalResolution - (NewModeBuffer[ValidCount].Rows * EFI_GLYPH_HEIGHT)) >> 1;
+ ValidCount++;
+ }
+ }
+
+ DEBUG_CODE (
+ for (Index = 0; Index < ValidCount; Index++) {
+ DEBUG ((DEBUG_INFO, "Graphics - Mode %d, Column = %d, Row = %d\n",
+ Index, NewModeBuffer[Index].Columns, NewModeBuffer[Index].Rows));
+ }
+ );
+
+ //
+ // Return valid mode count and mode information buffer.
+ //
+ *TextModeCount = ValidCount;
+ *TextModeData = NewModeBuffer;
+ return EFI_SUCCESS;
+}
+
+/**
+ Start this driver on Controller by opening Graphics Output Protocol,
+ and installing Simple Text Out protocol on Controller.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to bind driver to
+ @param RemainingDevicePath Optional parameter use to pick a specific child
+ device to start.
+
+ @retval EFI_SUCCESS This driver is added to Controller.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleControllerDriverStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ GRAPHICS_CONSOLE_DEV *Private;
+ UINT32 HorizontalResolution;
+ UINT32 VerticalResolution;
+ UINT32 ModeIndex;
+ UINTN MaxMode;
+ UINT32 ModeNumber;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE *Mode;
+ UINTN SizeOfInfo;
+ EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
+
+ ModeNumber = 0;
+
+ //
+ // Initialize the Graphics Console device instance
+ //
+ Private = AllocateCopyPool (
+ sizeof (GRAPHICS_CONSOLE_DEV),
+ &mGraphicsConsoleDevTemplate
+ );
+ if (Private == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Private->SimpleTextOutput.Mode = &(Private->SimpleTextOutputMode);
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiGraphicsOutputProtocolGuid,
+ (VOID **) &Private->GraphicsOutput,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ Private->ExtendedTextOutput.TextOut = &(Private->SimpleTextOutput);
+ Private->ExtendedTextOutput.GraphicsOutput = Private->GraphicsOutput;
+
+ HorizontalResolution = PcdGet32 (PcdVideoHorizontalResolution);
+ VerticalResolution = PcdGet32 (PcdVideoVerticalResolution);
+
+ ASSERT (Private->GraphicsOutput != NULL);
+ //
+ // The console is build on top of Graphics Output Protocol, find the mode number
+ // for the user-defined mode; if there are multiple video devices,
+ // graphic console driver will set all the video devices to the same mode.
+ //
+ if ((HorizontalResolution == 0x0) || (VerticalResolution == 0x0)) {
+ //
+ // Find the highest resolution which GOP supports.
+ //
+ MaxMode = Private->GraphicsOutput->Mode->MaxMode;
+
+ for (ModeIndex = 0; ModeIndex < MaxMode; ModeIndex++) {
+ Status = Private->GraphicsOutput->QueryMode (
+ Private->GraphicsOutput,
+ ModeIndex,
+ &SizeOfInfo,
+ &Info
+ );
+ if (!EFI_ERROR (Status)) {
+ if ((Info->HorizontalResolution > HorizontalResolution) ||
+ ((Info->HorizontalResolution == HorizontalResolution) && (Info->VerticalResolution > VerticalResolution))) {
+ HorizontalResolution = Info->HorizontalResolution;
+ VerticalResolution = Info->VerticalResolution;
+ ModeNumber = ModeIndex;
+ }
+ FreePool (Info);
+ }
+ }
+ if ((HorizontalResolution == 0x0) || (VerticalResolution == 0x0)) {
+ Status = EFI_UNSUPPORTED;
+ goto Error;
+ }
+ } else {
+ //
+ // Use user-defined resolution
+ //
+ Status = CheckModeSupported (
+ Private->GraphicsOutput,
+ HorizontalResolution,
+ VerticalResolution,
+ &ModeNumber
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // if not supporting current mode, try 800x600 which is required by UEFI/EFI spec.
+ //
+ HorizontalResolution = 800;
+ VerticalResolution = 600;
+ Status = CheckModeSupported (
+ Private->GraphicsOutput,
+ HorizontalResolution,
+ VerticalResolution,
+ &ModeNumber
+ );
+ Mode = Private->GraphicsOutput->Mode;
+ if (EFI_ERROR (Status) && Mode->MaxMode != 0) {
+ //
+ // Set default mode failed or device don't support default mode, then get the current mode information.
+ //
+ HorizontalResolution = Mode->Info->HorizontalResolution;
+ VerticalResolution = Mode->Info->VerticalResolution;
+ ModeNumber = Mode->Mode;
+ }
+ }
+ }
+ if (ModeNumber != Private->GraphicsOutput->Mode->Mode) {
+ //
+ // Current graphics mode is not set or is not set to the mode which we has found,
+ // set the new graphic mode.
+ //
+ Status = Private->GraphicsOutput->SetMode (Private->GraphicsOutput, ModeNumber);
+ if (EFI_ERROR (Status)) {
+ //
+ // The mode set operation failed
+ //
+ goto Error;
+ }
+ }
+
+ DEBUG ((DEBUG_INFO, "GraphicsConsole video resolution %d x %d\n", HorizontalResolution, VerticalResolution));
+
+ //
+ // Initialize the mode which GraphicsConsole supports.
+ //
+ Status = InitializeGraphicsConsoleTextMode (
+ HorizontalResolution,
+ VerticalResolution,
+ ModeNumber,
+ &MaxMode,
+ &Private->ModeData
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ //
+ // Update the maximum number of modes
+ //
+ Private->SimpleTextOutputMode.MaxMode = (INT32) MaxMode;
+
+ DEBUG_CODE_BEGIN ();
+ Status = GraphicsConsoleConOutSetMode (&Private->SimpleTextOutput, 0);
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+ Status = GraphicsConsoleConOutOutputString (&Private->SimpleTextOutput, (CHAR16 *)L"Graphics Console Started\n\r");
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+ DEBUG_CODE_END ();
+
+ //
+ // Install protocol interfaces for the Graphics Console device.
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Controller,
+ &gEfiSimpleTextOutProtocolGuid,
+ &Private->SimpleTextOutput,
+ &gExtendedTextOutputProtocolGuid,
+ &Private->ExtendedTextOutput,
+ NULL
+ );
+
+Error:
+ if (EFI_ERROR (Status)) {
+ //
+ // Close GOP.
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiGraphicsOutputProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ if (Private->LineBuffer != NULL) {
+ FreePool (Private->LineBuffer);
+ }
+
+ if (Private->ModeData != NULL) {
+ FreePool (Private->ModeData);
+ }
+
+ //
+ // Free private data
+ //
+ FreePool (Private);
+ }
+
+ return Status;
+}
+
+/**
+ Stop this driver on Controller by removing Simple Text Out protocol
+ and closing the Graphics Output Protocol on Controller.
+
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to stop driver on
+ @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
+ children is zero stop the entire bus driver.
+ @param ChildHandleBuffer List of Child Handles to Stop.
+
+ @retval EFI_SUCCESS This driver is removed Controller.
+ @retval EFI_NOT_STARTED Simple Text Out protocol could not be found the
+ Controller.
+ @retval other This driver was not removed from this device.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleControllerDriverStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *SimpleTextOutput;
+ GRAPHICS_CONSOLE_DEV *Private;
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiSimpleTextOutProtocolGuid,
+ (VOID **) &SimpleTextOutput,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_NOT_STARTED;
+ }
+
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (SimpleTextOutput);
+
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ Controller,
+ &gEfiSimpleTextOutProtocolGuid,
+ &Private->SimpleTextOutput,
+ &gExtendedTextOutputProtocolGuid,
+ &Private->ExtendedTextOutput,
+ NULL
+ );
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // Close GOP.
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiGraphicsOutputProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ if (Private->LineBuffer != NULL) {
+ FreePool (Private->LineBuffer);
+ }
+
+ if (Private->ModeData != NULL) {
+ FreePool (Private->ModeData);
+ }
+
+ //
+ // Free our instance data
+ //
+ FreePool (Private);
+ }
+
+ return Status;
+}
+
+/**
+ Check if the current specific mode supported the user defined resolution
+ for the Graphics Console device based on Graphics Output Protocol.
+
+ If yes, set the graphic devcice's current mode to this specific mode.
+
+ @param GraphicsOutput Graphics Output Protocol instance pointer.
+ @param HorizontalResolution User defined horizontal resolution
+ @param VerticalResolution User defined vertical resolution.
+ @param CurrentModeNumber Current specific mode to be check.
+
+ @retval EFI_SUCCESS The mode is supported.
+ @retval EFI_UNSUPPORTED The specific mode is out of range of graphics
+ device supported.
+ @retval other The specific mode does not support user defined
+ resolution or failed to set the current mode to the
+ specific mode on graphics device.
+
+**/
+EFI_STATUS
+CheckModeSupported (
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
+ IN UINT32 HorizontalResolution,
+ IN UINT32 VerticalResolution,
+ OUT UINT32 *CurrentModeNumber
+ )
+{
+ UINT32 ModeNumber;
+ EFI_STATUS Status;
+ UINTN SizeOfInfo;
+ EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
+ UINT32 MaxMode;
+
+ Status = EFI_SUCCESS;
+ MaxMode = GraphicsOutput->Mode->MaxMode;
+
+ for (ModeNumber = 0; ModeNumber < MaxMode; ModeNumber++) {
+ Status = GraphicsOutput->QueryMode (
+ GraphicsOutput,
+ ModeNumber,
+ &SizeOfInfo,
+ &Info
+ );
+ if (!EFI_ERROR (Status)) {
+ if ((Info->HorizontalResolution == HorizontalResolution) &&
+ (Info->VerticalResolution == VerticalResolution)) {
+ if ((GraphicsOutput->Mode->Info->HorizontalResolution == HorizontalResolution) &&
+ (GraphicsOutput->Mode->Info->VerticalResolution == VerticalResolution)) {
+ //
+ // If video device has been set to this mode, we do not need to SetMode again
+ //
+ FreePool (Info);
+ break;
+ } else {
+ Status = GraphicsOutput->SetMode (GraphicsOutput, ModeNumber);
+ if (!EFI_ERROR (Status)) {
+ FreePool (Info);
+ break;
+ }
+ }
+ }
+ FreePool (Info);
+ }
+ }
+
+ if (ModeNumber == GraphicsOutput->Mode->MaxMode) {
+ Status = EFI_UNSUPPORTED;
+ }
+
+ *CurrentModeNumber = ModeNumber;
+ return Status;
+}
+
+
+/**
+ Locate HII Database protocol and HII Font protocol.
+
+ @retval EFI_SUCCESS HII Database protocol and HII Font protocol
+ are located successfully.
+ @return other Failed to locate HII Database protocol or
+ HII Font protocol.
+
+**/
+EFI_STATUS
+EfiLocateHiiProtocol (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (&gEfiHiiDatabaseProtocolGuid, NULL, (VOID **) &mHiiDatabase);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->LocateProtocol (&gEfiHiiFontProtocolGuid, NULL, (VOID **) &mHiiFont);
+ return Status;
+}
+
+//
+// Body of the STO functions
+//
+
+/**
+ Reset the text output device hardware and optionally run diagnostics.
+
+ Implements SIMPLE_TEXT_OUTPUT.Reset().
+ If ExtendeVerification is TRUE, then perform dependent Graphics Console
+ device reset, and set display mode to mode 0.
+ If ExtendedVerification is FALSE, only set display mode to mode 0.
+
+ @param This Protocol instance pointer.
+ @param ExtendedVerification Indicates that the driver may perform a more
+ exhaustive verification operation of the device
+ during reset.
+
+ @retval EFI_SUCCESS The text output device was reset.
+ @retval EFI_DEVICE_ERROR The text output device is not functioning correctly and
+ could not be reset.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutReset (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ )
+{
+ EFI_STATUS Status;
+ Status = This->SetMode (This, 0);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = This->SetAttribute (This, EFI_TEXT_ATTR (This->Mode->Attribute & 0x0F, EFI_BACKGROUND_BLACK));
+ return Status;
+}
+
+
+/**
+ Write a Unicode string to the output device.
+
+ Implements SIMPLE_TEXT_OUTPUT.OutputString().
+ The Unicode string will be converted to Glyphs and will be
+ sent to the Graphics Console.
+
+ @param This Protocol instance pointer.
+ @param WString The NULL-terminated Unicode string to be displayed
+ on the output device(s). All output devices must
+ also support the Unicode drawing defined in this file.
+
+ @retval EFI_SUCCESS The string was output to the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to output
+ the text.
+ @retval EFI_UNSUPPORTED The output device's mode is not currently in a
+ defined text mode.
+ @retval EFI_WARN_UNKNOWN_GLYPH This warning code indicates that some of the
+ characters in the Unicode string could not be
+ rendered and were skipped.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutOutputString (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN CHAR16 *WString
+ )
+{
+ GRAPHICS_CONSOLE_DEV *Private;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ INTN Mode;
+ UINTN MaxColumn;
+ UINTN MaxRow;
+ UINTN Width;
+ UINTN Height;
+ UINTN Delta;
+ EFI_STATUS Status;
+ BOOLEAN Warning;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background;
+ UINTN DeltaX;
+ UINTN DeltaY;
+ UINTN Count;
+ UINTN Index;
+ INT32 OriginAttribute;
+ EFI_TPL OldTpl;
+
+ if (This->Mode->Mode == -1) {
+ //
+ // If current mode is not valid, return error.
+ //
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = EFI_SUCCESS;
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ //
+ // Current mode
+ //
+ Mode = This->Mode->Mode;
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (This);
+ GraphicsOutput = Private->GraphicsOutput;
+
+ MaxColumn = Private->ModeData[Mode].Columns;
+ MaxRow = Private->ModeData[Mode].Rows;
+ DeltaX = (UINTN) Private->ModeData[Mode].DeltaX;
+ DeltaY = (UINTN) Private->ModeData[Mode].DeltaY;
+ Width = MaxColumn * EFI_GLYPH_WIDTH;
+ Height = (MaxRow - 1) * EFI_GLYPH_HEIGHT;
+ Delta = Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL);
+
+ //
+ // The Attributes won't change when during the time OutputString is called
+ //
+ GetTextColors (This, &Foreground, &Background);
+
+ FlushCursor (This);
+
+ Warning = FALSE;
+
+ //
+ // Backup attribute
+ //
+ OriginAttribute = This->Mode->Attribute;
+
+ while (*WString != L'\0') {
+
+ if (*WString == CHAR_BACKSPACE) {
+ //
+ // If the cursor is at the left edge of the display, then move the cursor
+ // one row up.
+ //
+ if (This->Mode->CursorColumn == 0 && This->Mode->CursorRow > 0) {
+ This->Mode->CursorRow--;
+ This->Mode->CursorColumn = (INT32) (MaxColumn - 1);
+ This->OutputString (This, SpaceStr);
+ FlushCursor (This);
+ This->Mode->CursorRow--;
+ This->Mode->CursorColumn = (INT32) (MaxColumn - 1);
+ } else if (This->Mode->CursorColumn > 0) {
+ //
+ // If the cursor is not at the left edge of the display, then move the cursor
+ // left one column.
+ //
+ This->Mode->CursorColumn--;
+ This->OutputString (This, SpaceStr);
+ FlushCursor (This);
+ This->Mode->CursorColumn--;
+ }
+
+ WString++;
+
+ } else if (*WString == CHAR_LINEFEED) {
+ //
+ // If the cursor is at the bottom of the display, then scroll the display one
+ // row, and do not update the cursor position. Otherwise, move the cursor
+ // down one row.
+ //
+ if (This->Mode->CursorRow == (INT32) (MaxRow - 1)) {
+ //
+ // Scroll Screen Up One Row
+ //
+ GraphicsOutput->Blt (
+ GraphicsOutput,
+ NULL,
+ EfiBltVideoToVideo,
+ DeltaX,
+ DeltaY + EFI_GLYPH_HEIGHT,
+ DeltaX,
+ DeltaY,
+ Width,
+ Height,
+ Delta
+ );
+
+ //
+ // Print Blank Line at last line
+ //
+ GraphicsOutput->Blt (
+ GraphicsOutput,
+ &Background,
+ EfiBltVideoFill,
+ 0,
+ 0,
+ DeltaX,
+ DeltaY + Height,
+ Width,
+ EFI_GLYPH_HEIGHT,
+ Delta
+ );
+ } else {
+ This->Mode->CursorRow++;
+ }
+
+ WString++;
+
+ } else if (*WString == CHAR_CARRIAGE_RETURN) {
+ //
+ // Move the cursor to the beginning of the current row.
+ //
+ This->Mode->CursorColumn = 0;
+ WString++;
+
+ } else if (*WString == WIDE_CHAR) {
+
+ This->Mode->Attribute |= EFI_WIDE_ATTRIBUTE;
+ WString++;
+
+ } else if (*WString == NARROW_CHAR) {
+
+ This->Mode->Attribute &= (~ (UINT32) EFI_WIDE_ATTRIBUTE);
+ WString++;
+
+ } else {
+ //
+ // Print the character at the current cursor position and move the cursor
+ // right one column. If this moves the cursor past the right edge of the
+ // display, then the line should wrap to the beginning of the next line. This
+ // is equivalent to inserting a CR and an LF. Note that if the cursor is at the
+ // bottom of the display, and the line wraps, then the display will be scrolled
+ // one line.
+ // If wide char is going to be displayed, need to display one character at a time
+ // Or, need to know the display length of a certain string.
+ //
+ // Index is used to determine how many character width units (wide = 2, narrow = 1)
+ // Count is used to determine how many characters are used regardless of their attributes
+ //
+ for (Count = 0, Index = 0; (This->Mode->CursorColumn + Index) < MaxColumn; Count++, Index++) {
+ if (WString[Count] == CHAR_NULL ||
+ WString[Count] == CHAR_BACKSPACE ||
+ WString[Count] == CHAR_LINEFEED ||
+ WString[Count] == CHAR_CARRIAGE_RETURN ||
+ WString[Count] == WIDE_CHAR ||
+ WString[Count] == NARROW_CHAR) {
+ break;
+ }
+ //
+ // Is the wide attribute on?
+ //
+ if ((This->Mode->Attribute & EFI_WIDE_ATTRIBUTE) != 0) {
+ //
+ // If wide, add one more width unit than normal since we are going to increment at the end of the for loop
+ //
+ Index++;
+ //
+ // This is the end-case where if we are at column 79 and about to print a wide character
+ // We should prevent this from happening because we will wrap inappropriately. We should
+ // not print this character until the next line.
+ //
+ if ((This->Mode->CursorColumn + Index + 1) > MaxColumn) {
+ Index++;
+ break;
+ }
+ }
+ }
+
+ Status = DrawUnicodeWeightAtCursorN (This, WString, Count);
+ if (EFI_ERROR (Status)) {
+ Warning = TRUE;
+ }
+ //
+ // At the end of line, output carriage return and line feed
+ //
+ WString += Count;
+ This->Mode->CursorColumn += (INT32) Index;
+ if (This->Mode->CursorColumn > (INT32) MaxColumn) {
+ This->Mode->CursorColumn -= 2;
+ This->OutputString (This, SpaceStr);
+ }
+
+ if (This->Mode->CursorColumn >= (INT32) MaxColumn) {
+ FlushCursor (This);
+ if (!Private->ExtendedTextOutput.AutoWrap) {
+ This->Mode->CursorColumn = MaxColumn - 1;
+ } else {
+ This->OutputString (This, mCrLfString);
+ }
+ FlushCursor (This);
+ }
+ }
+ }
+
+ This->Mode->Attribute = OriginAttribute;
+
+ FlushCursor (This);
+
+ if (Warning) {
+ Status = EFI_WARN_UNKNOWN_GLYPH;
+ }
+
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+
+}
+
+/**
+ Verifies that all characters in a Unicode string can be output to the
+ target device.
+
+ Implements SIMPLE_TEXT_OUTPUT.TestString().
+ If one of the characters in the *Wstring is neither valid valid Unicode
+ drawing characters, not ASCII code, then this function will return
+ EFI_UNSUPPORTED
+
+ @param This Protocol instance pointer.
+ @param WString The NULL-terminated Unicode string to be examined for the output
+ device(s).
+
+ @retval EFI_SUCCESS The device(s) are capable of rendering the output string.
+ @retval EFI_UNSUPPORTED Some of the characters in the Unicode string cannot be
+ rendered by one or more of the output devices mapped
+ by the EFI handle.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutTestString (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN CHAR16 *WString
+ )
+{
+ EFI_STATUS Status;
+ UINT16 Count;
+
+ EFI_IMAGE_OUTPUT *Blt;
+
+ Blt = NULL;
+ Count = 0;
+
+ while (WString[Count] != 0) {
+ Status = mHiiFont->GetGlyph (
+ mHiiFont,
+ WString[Count],
+ NULL,
+ &Blt,
+ NULL
+ );
+ if (Blt != NULL) {
+ FreePool (Blt);
+ Blt = NULL;
+ }
+ Count++;
+
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Returns information for an available text mode that the output device(s)
+ supports
+
+ Implements SIMPLE_TEXT_OUTPUT.QueryMode().
+ It returnes information for an available text mode that the Graphics Console supports.
+ In this driver,we only support text mode 80x25, which is defined as mode 0.
+
+ @param This Protocol instance pointer.
+ @param ModeNumber The mode number to return information on.
+ @param Columns The returned columns of the requested mode.
+ @param Rows The returned rows of the requested mode.
+
+ @retval EFI_SUCCESS The requested mode information is returned.
+ @retval EFI_UNSUPPORTED The mode number is not valid.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutQueryMode (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN ModeNumber,
+ OUT UINTN *Columns,
+ OUT UINTN *Rows
+ )
+{
+ GRAPHICS_CONSOLE_DEV *Private;
+ EFI_STATUS Status;
+ EFI_TPL OldTpl;
+
+ if (ModeNumber >= (UINTN) This->Mode->MaxMode) {
+ return EFI_UNSUPPORTED;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ Status = EFI_SUCCESS;
+
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (This);
+
+ *Columns = Private->ModeData[ModeNumber].Columns;
+ *Rows = Private->ModeData[ModeNumber].Rows;
+
+ if (*Columns <= 0 || *Rows <= 0) {
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+
+ }
+
+Done:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+
+/**
+ Sets the output device(s) to a specified mode.
+
+ Implements SIMPLE_TEXT_OUTPUT.SetMode().
+ Set the Graphics Console to a specified mode. In this driver, we only support mode 0.
+
+ @param This Protocol instance pointer.
+ @param ModeNumber The text mode to set.
+
+ @retval EFI_SUCCESS The requested text mode is set.
+ @retval EFI_DEVICE_ERROR The requested text mode cannot be set because of
+ Graphics Console device error.
+ @retval EFI_UNSUPPORTED The text mode number is not valid.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutSetMode (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN ModeNumber
+ )
+{
+ EFI_STATUS Status;
+ GRAPHICS_CONSOLE_DEV *Private;
+ GRAPHICS_CONSOLE_MODE_DATA *ModeData;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL *NewLineBuffer;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ EFI_TPL OldTpl;
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (This);
+ GraphicsOutput = Private->GraphicsOutput;
+
+ //
+ // Make sure the requested mode number is supported
+ //
+ if (ModeNumber >= (UINTN) This->Mode->MaxMode) {
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ ModeData = &(Private->ModeData[ModeNumber]);
+
+ if (ModeData->Columns <= 0 && ModeData->Rows <= 0) {
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ //
+ // If the mode has been set at least one other time, then LineBuffer will not be NULL
+ //
+ if (Private->LineBuffer != NULL) {
+ //
+ // If the new mode is the same as the old mode, then just return EFI_SUCCESS
+ //
+ if ((INT32) ModeNumber == This->Mode->Mode) {
+ //
+ // Clear the current text window on the current graphics console
+ //
+ This->ClearScreen (This);
+ Status = EFI_SUCCESS;
+ goto Done;
+ }
+ //
+ // Otherwise, the size of the text console and/or the GOP mode will
+ // be changed, so erase the cursor, and free the LineBuffer for the
+ // current mode
+ //
+ FlushCursor (This);
+
+ FreePool (Private->LineBuffer);
+ }
+
+ //
+ // Attempt to allocate a line buffer for the requested mode number
+ //
+ NewLineBuffer = AllocatePool (sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) * ModeData->Columns * EFI_GLYPH_WIDTH * EFI_GLYPH_HEIGHT);
+
+ if (NewLineBuffer == NULL) {
+ //
+ // The new line buffer could not be allocated, so return an error.
+ // No changes to the state of the current console have been made, so the current console is still valid
+ //
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // Assign the current line buffer to the newly allocated line buffer
+ //
+ Private->LineBuffer = NewLineBuffer;
+
+ if (ModeData->GopModeNumber != GraphicsOutput->Mode->Mode) {
+ //
+ // Either no graphics mode is currently set, or it is set
+ // to the wrong resolution, so set the new graphics mode
+ //
+ Status = GraphicsOutput->SetMode (GraphicsOutput, ModeData->GopModeNumber);
+ if (EFI_ERROR (Status)) {
+ //
+ // The mode set operation failed
+ //
+ goto Done;
+ }
+ } else {
+ //
+ // The current graphics mode is correct, so simply clear the entire display
+ //
+ Status = GraphicsOutput->Blt (
+ GraphicsOutput,
+ &mGraphicsEfiColors[0],
+ EfiBltVideoFill,
+ 0,
+ 0,
+ 0,
+ 0,
+ ModeData->GopWidth,
+ ModeData->GopHeight,
+ 0
+ );
+ }
+
+ //
+ // The new mode is valid, so commit the mode change
+ //
+ This->Mode->Mode = (INT32) ModeNumber;
+
+ //
+ // Move the text cursor to the upper left hand corner of the display and flush it
+ //
+ This->Mode->CursorColumn = 0;
+ This->Mode->CursorRow = 0;
+
+ FlushCursor (This);
+
+ Status = EFI_SUCCESS;
+
+Done:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+
+/**
+ Sets the background and foreground colors for the OutputString () and
+ ClearScreen () functions.
+
+ Implements SIMPLE_TEXT_OUTPUT.SetAttribute().
+
+ @param This Protocol instance pointer.
+ @param Attribute The attribute to set. Bits 0..3 are the foreground
+ color, and bits 4..6 are the background color.
+ All other bits are undefined and must be zero.
+
+ @retval EFI_SUCCESS The requested attribute is set.
+ @retval EFI_DEVICE_ERROR The requested attribute cannot be set due to Graphics Console port error.
+ @retval EFI_UNSUPPORTED The attribute requested is not defined.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutSetAttribute (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN Attribute
+ )
+{
+ EFI_TPL OldTpl;
+
+ if ((Attribute | 0x7F) != 0x7F) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if ((INT32) Attribute == This->Mode->Attribute) {
+ return EFI_SUCCESS;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ FlushCursor (This);
+
+ This->Mode->Attribute = (INT32) Attribute;
+
+ FlushCursor (This);
+
+ gBS->RestoreTPL (OldTpl);
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Clears the output device(s) display to the currently selected background
+ color.
+
+ Implements SIMPLE_TEXT_OUTPUT.ClearScreen().
+
+ @param This Protocol instance pointer.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
+ @retval EFI_UNSUPPORTED The output device is not in a valid text mode.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutClearScreen (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This
+ )
+{
+ EFI_STATUS Status;
+ GRAPHICS_CONSOLE_DEV *Private;
+ GRAPHICS_CONSOLE_MODE_DATA *ModeData;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background;
+ EFI_TPL OldTpl;
+
+ if (This->Mode->Mode == -1) {
+ //
+ // If current mode is not valid, return error.
+ //
+ return EFI_UNSUPPORTED;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (This);
+ GraphicsOutput = Private->GraphicsOutput;
+ ModeData = &(Private->ModeData[This->Mode->Mode]);
+
+ GetTextColors (This, &Foreground, &Background);
+ Status = GraphicsOutput->Blt (
+ GraphicsOutput,
+ &Background,
+ EfiBltVideoFill,
+ 0,
+ 0,
+ 0,
+ 0,
+ ModeData->GopWidth,
+ ModeData->GopHeight,
+ 0
+ );
+
+ This->Mode->CursorColumn = 0;
+ This->Mode->CursorRow = 0;
+
+ FlushCursor (This);
+
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Sets the current coordinates of the cursor position.
+
+ Implements SIMPLE_TEXT_OUTPUT.SetCursorPosition().
+
+ @param This Protocol instance pointer.
+ @param Column The position to set the cursor to. Must be greater than or
+ equal to zero and less than the number of columns and rows
+ by QueryMode ().
+ @param Row The position to set the cursor to. Must be greater than or
+ equal to zero and less than the number of columns and rows
+ by QueryMode ().
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
+ @retval EFI_UNSUPPORTED The output device is not in a valid text mode, or the
+ cursor position is invalid for the current mode.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutSetCursorPosition (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN Column,
+ IN UINTN Row
+ )
+{
+ GRAPHICS_CONSOLE_DEV *Private;
+ GRAPHICS_CONSOLE_MODE_DATA *ModeData;
+ EFI_STATUS Status;
+ EFI_TPL OldTpl;
+
+ if (This->Mode->Mode == -1) {
+ //
+ // If current mode is not valid, return error.
+ //
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = EFI_SUCCESS;
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (This);
+ ModeData = &(Private->ModeData[This->Mode->Mode]);
+
+ if ((Column >= ModeData->Columns) || (Row >= ModeData->Rows)) {
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ if ((This->Mode->CursorColumn == (INT32) Column) && (This->Mode->CursorRow == (INT32) Row)) {
+ Status = EFI_SUCCESS;
+ goto Done;
+ }
+
+ FlushCursor (This);
+
+ This->Mode->CursorColumn = (INT32) Column;
+ This->Mode->CursorRow = (INT32) Row;
+
+ FlushCursor (This);
+
+Done:
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Makes the cursor visible or invisible.
+
+ Implements SIMPLE_TEXT_OUTPUT.EnableCursor().
+
+ @param This Protocol instance pointer.
+ @param Visible If TRUE, the cursor is set to be visible, If FALSE,
+ the cursor is set to be invisible.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_UNSUPPORTED The output device's mode is not currently in a
+ defined text mode.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutEnableCursor (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN BOOLEAN Visible
+ )
+{
+ EFI_TPL OldTpl;
+
+ if (This->Mode->Mode == -1) {
+ //
+ // If current mode is not valid, return error.
+ //
+ return EFI_UNSUPPORTED;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ FlushCursor (This);
+
+ This->Mode->CursorVisible = Visible;
+
+ FlushCursor (This);
+
+ gBS->RestoreTPL (OldTpl);
+ return EFI_SUCCESS;
+}
+
+/**
+ Gets Graphics Console devcie's foreground color and background color.
+
+ @param This Protocol instance pointer.
+ @param Foreground Returned text foreground color.
+ @param Background Returned text background color.
+
+ @retval EFI_SUCCESS It returned always.
+
+**/
+EFI_STATUS
+GetTextColors (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Foreground,
+ OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Background
+ )
+{
+ INTN Attribute;
+
+ Attribute = This->Mode->Attribute & 0x7F;
+
+ *Foreground = mGraphicsEfiColors[Attribute & 0x0f];
+ *Background = mGraphicsEfiColors[Attribute >> 4];
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Draw Unicode string on the Graphics Console device's screen.
+
+ @param This Protocol instance pointer.
+ @param UnicodeWeight One Unicode string to be displayed.
+ @param Count The count of Unicode string.
+
+ @retval EFI_OUT_OF_RESOURCES If no memory resource to use.
+ @retval EFI_UNSUPPORTED If no Graphics Output Protocol exists.
+ @retval EFI_SUCCESS Drawing Unicode string implemented successfully.
+
+**/
+EFI_STATUS
+DrawUnicodeWeightAtCursorN (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN CHAR16 *UnicodeWeight,
+ IN UINTN Count
+ )
+{
+ EFI_STATUS Status;
+ GRAPHICS_CONSOLE_DEV *Private;
+ EFI_IMAGE_OUTPUT *Blt;
+ EFI_STRING String;
+ EFI_FONT_DISPLAY_INFO *FontInfo;
+
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (This);
+ Blt = (EFI_IMAGE_OUTPUT *) AllocateZeroPool (sizeof (EFI_IMAGE_OUTPUT));
+ if (Blt == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Blt->Width = (UINT16) (Private->ModeData[This->Mode->Mode].GopWidth);
+ Blt->Height = (UINT16) (Private->ModeData[This->Mode->Mode].GopHeight);
+
+ String = AllocateCopyPool ((Count + 1) * sizeof (CHAR16), UnicodeWeight);
+ if (String == NULL) {
+ FreePool (Blt);
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // Set the end character
+ //
+ *(String + Count) = L'\0';
+
+ FontInfo = (EFI_FONT_DISPLAY_INFO *) AllocateZeroPool (sizeof (EFI_FONT_DISPLAY_INFO));
+ if (FontInfo == NULL) {
+ FreePool (Blt);
+ FreePool (String);
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // Get current foreground and background colors.
+ //
+ GetTextColors (This, &FontInfo->ForegroundColor, &FontInfo->BackgroundColor);
+
+ //
+ // If Graphics Output protocol exists, using HII Font protocol to draw.
+ //
+ Blt->Image.Screen = Private->GraphicsOutput;
+
+ Status = mHiiFont->StringToImage (
+ mHiiFont,
+ EFI_HII_IGNORE_IF_NO_GLYPH | EFI_HII_DIRECT_TO_SCREEN | EFI_HII_IGNORE_LINE_BREAK,
+ String,
+ FontInfo,
+ &Blt,
+ This->Mode->CursorColumn * EFI_GLYPH_WIDTH + Private->ModeData[This->Mode->Mode].DeltaX,
+ This->Mode->CursorRow * EFI_GLYPH_HEIGHT + Private->ModeData[This->Mode->Mode].DeltaY,
+ NULL,
+ NULL,
+ NULL
+ );
+
+ if (Blt != NULL) {
+ FreePool (Blt);
+ }
+ if (String != NULL) {
+ FreePool (String);
+ }
+ if (FontInfo != NULL) {
+ FreePool (FontInfo);
+ }
+ return Status;
+}
+
+/**
+ Flush the cursor on the screen.
+
+ If CursorVisible is FALSE, nothing to do and return directly.
+ If CursorVisible is TRUE,
+ i) If the cursor shows on screen, it will be erased.
+ ii) If the cursor does not show on screen, it will be shown.
+
+ @param This Protocol instance pointer.
+
+ @retval EFI_SUCCESS The cursor is erased successfully.
+
+**/
+EFI_STATUS
+FlushCursor (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This
+ )
+{
+ GRAPHICS_CONSOLE_DEV *Private;
+ EFI_SIMPLE_TEXT_OUTPUT_MODE *CurrentMode;
+ INTN GlyphX;
+ INTN GlyphY;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Foreground;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Background;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION BltChar[EFI_GLYPH_HEIGHT][EFI_GLYPH_WIDTH];
+ UINTN PosX;
+ UINTN PosY;
+
+ CurrentMode = This->Mode;
+
+ if (!CurrentMode->CursorVisible) {
+ return EFI_SUCCESS;
+ }
+
+ Private = GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS (This);
+ GraphicsOutput = Private->GraphicsOutput;
+
+ //
+ // In this driver, only narrow character was supported.
+ //
+ //
+ // Blt a character to the screen
+ //
+ GlyphX = (CurrentMode->CursorColumn * EFI_GLYPH_WIDTH) + Private->ModeData[CurrentMode->Mode].DeltaX;
+ GlyphY = (CurrentMode->CursorRow * EFI_GLYPH_HEIGHT) + Private->ModeData[CurrentMode->Mode].DeltaY;
+
+ GraphicsOutput->Blt (
+ GraphicsOutput,
+ (EFI_GRAPHICS_OUTPUT_BLT_PIXEL *) BltChar,
+ EfiBltVideoToBltBuffer,
+ GlyphX,
+ GlyphY,
+ 0,
+ 0,
+ EFI_GLYPH_WIDTH,
+ EFI_GLYPH_HEIGHT,
+ EFI_GLYPH_WIDTH * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+ );
+
+ GetTextColors (This, &Foreground.Pixel, &Background.Pixel);
+
+ //
+ // Convert Monochrome bitmap of the Glyph to BltBuffer structure
+ //
+ for (PosY = 0; PosY < EFI_GLYPH_HEIGHT; PosY++) {
+ for (PosX = 0; PosX < EFI_GLYPH_WIDTH; PosX++) {
+ if ((mCursorGlyph.GlyphCol1[PosY] & (BIT0 << PosX)) != 0) {
+ BltChar[PosY][EFI_GLYPH_WIDTH - PosX - 1].Raw ^= Foreground.Raw;
+ }
+ }
+ }
+
+ GraphicsOutput->Blt (
+ GraphicsOutput,
+ (EFI_GRAPHICS_OUTPUT_BLT_PIXEL *) BltChar,
+ EfiBltBufferToVideo,
+ 0,
+ 0,
+ GlyphX,
+ GlyphY,
+ EFI_GLYPH_WIDTH,
+ EFI_GLYPH_HEIGHT,
+ EFI_GLYPH_WIDTH * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+ HII Database Protocol notification event handler.
+
+ Register font package when HII Database Protocol has been installed.
+
+ @param[in] Event Event whose notification function is being invoked.
+ @param[in] Context Pointer to the notification function's context.
+**/
+VOID
+EFIAPI
+RegisterFontPackage (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ EFI_HII_SIMPLE_FONT_PACKAGE_HDR *SimplifiedFont;
+ UINT32 PackageLength;
+ UINT8 *Package;
+ UINT8 *Location;
+ EFI_HII_DATABASE_PROTOCOL *HiiDatabase;
+
+ //
+ // Locate HII Database Protocol
+ //
+ Status = gBS->LocateProtocol (
+ &gEfiHiiDatabaseProtocolGuid,
+ NULL,
+ (VOID **) &HiiDatabase
+ );
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ //
+ // Add 4 bytes to the header for entire length for HiiAddPackages use only.
+ //
+ // +--------------------------------+ <-- Package
+ // | |
+ // | PackageLength(4 bytes) |
+ // | |
+ // |--------------------------------| <-- SimplifiedFont
+ // | |
+ // |EFI_HII_SIMPLE_FONT_PACKAGE_HDR |
+ // | |
+ // |--------------------------------| <-- Location
+ // | |
+ // | gUsStdNarrowGlyphData |
+ // | |
+ // +--------------------------------+
+
+ PackageLength = sizeof (EFI_HII_SIMPLE_FONT_PACKAGE_HDR) + mNarrowFontSize + 4;
+ Package = AllocateZeroPool (PackageLength);
+ ASSERT (Package != NULL);
+
+ WriteUnaligned32((UINT32 *) Package,PackageLength);
+ SimplifiedFont = (EFI_HII_SIMPLE_FONT_PACKAGE_HDR *) (Package + 4);
+ SimplifiedFont->Header.Length = (UINT32) (PackageLength - 4);
+ SimplifiedFont->Header.Type = EFI_HII_PACKAGE_SIMPLE_FONTS;
+ SimplifiedFont->NumberOfNarrowGlyphs = (UINT16) (mNarrowFontSize / sizeof (EFI_NARROW_GLYPH));
+
+ Location = (UINT8 *) (&SimplifiedFont->NumberOfWideGlyphs + 1);
+ CopyMem (Location, gUsStdNarrowGlyphData, mNarrowFontSize);
+
+ //
+ // Add this simplified font package to a package list then install it.
+ //
+ mHiiHandle = HiiAddPackages (
+ &mFontPackageListGuid,
+ NULL,
+ Package,
+ NULL
+ );
+ ASSERT (mHiiHandle != NULL);
+ FreePool (Package);
+}
+
+/**
+ The user Entry Point for module GraphicsConsole. The user code starts with this function.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @return other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeGraphicsConsole (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Register notify function on HII Database Protocol to add font package.
+ //
+ EfiCreateProtocolNotifyEvent (
+ &gEfiHiiDatabaseProtocolGuid,
+ TPL_CALLBACK,
+ RegisterFontPackage,
+ NULL,
+ &mHiiRegistration
+ );
+
+ //
+ // Install driver model protocol(s).
+ //
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gGraphicsConsoleDriverBinding,
+ ImageHandle,
+ &gGraphicsConsoleComponentName,
+ &gGraphicsConsoleComponentName2
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.h b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.h
new file mode 100644
index 000000000000..ba93cab86bf3
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.h
@@ -0,0 +1,591 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006-2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef _GRAPHICS_CONSOLE_H_
+#define _GRAPHICS_CONSOLE_H_
+
+#include <Uefi.h>
+#include <Protocol/ExtendedTextOut.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/HiiFont.h>
+#include <Protocol/HiiDatabase.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/HiiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+#include <Guid/MdeModuleHii.h>
+
+extern EFI_COMPONENT_NAME_PROTOCOL gGraphicsConsoleComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gGraphicsConsoleComponentName2;
+extern EFI_DRIVER_BINDING_PROTOCOL gGraphicsConsoleDriverBinding;
+extern EFI_NARROW_GLYPH gUsStdNarrowGlyphData[];
+
+extern UINT32 mNarrowFontSize;
+
+typedef union {
+ EFI_NARROW_GLYPH NarrowGlyph;
+ EFI_WIDE_GLYPH WideGlyph;
+} GLYPH_UNION;
+
+//
+// Device Structure
+//
+#define GRAPHICS_CONSOLE_DEV_SIGNATURE SIGNATURE_32 ('g', 's', 't', 'o')
+
+typedef struct {
+ UINTN Columns;
+ UINTN Rows;
+ INTN DeltaX;
+ INTN DeltaY;
+ UINT32 GopWidth;
+ UINT32 GopHeight;
+ UINT32 GopModeNumber;
+} GRAPHICS_CONSOLE_MODE_DATA;
+
+typedef struct {
+ UINTN Signature;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL SimpleTextOutput;
+ EFI_SIMPLE_TEXT_OUTPUT_MODE SimpleTextOutputMode;
+ GRAPHICS_CONSOLE_MODE_DATA *ModeData;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL *LineBuffer;
+ EXTENDED_TEXT_OUTPUT_PROTOCOL ExtendedTextOutput;
+} GRAPHICS_CONSOLE_DEV;
+
+#define GRAPHICS_CONSOLE_CON_OUT_DEV_FROM_THIS(a) \
+ CR (a, GRAPHICS_CONSOLE_DEV, SimpleTextOutput, GRAPHICS_CONSOLE_DEV_SIGNATURE)
+
+
+//
+// EFI Component Name Functions
+//
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ );
+
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+
+/**
+ Reset the text output device hardware and optionally run diagnostics.
+
+ Implements SIMPLE_TEXT_OUTPUT.Reset().
+ If ExtendeVerification is TRUE, then perform dependent Graphics Console
+ device reset, and set display mode to mode 0.
+ If ExtendedVerification is FALSE, only set display mode to mode 0.
+
+ @param This Protocol instance pointer.
+ @param ExtendedVerification Indicates that the driver may perform a more
+ exhaustive verification operation of the device
+ during reset.
+
+ @retval EFI_SUCCESS The text output device was reset.
+ @retval EFI_DEVICE_ERROR The text output device is not functioning correctly and
+ could not be reset.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutReset (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ );
+
+/**
+ Write a Unicode string to the output device.
+
+ Implements SIMPLE_TEXT_OUTPUT.OutputString().
+ The Unicode string will be converted to Glyphs and will be
+ sent to the Graphics Console.
+
+ @param This Protocol instance pointer.
+ @param WString The NULL-terminated Unicode string to be displayed
+ on the output device(s). All output devices must
+ also support the Unicode drawing defined in this file.
+
+ @retval EFI_SUCCESS The string was output to the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to output
+ the text.
+ @retval EFI_UNSUPPORTED The output device's mode is not currently in a
+ defined text mode.
+ @retval EFI_WARN_UNKNOWN_GLYPH This warning code indicates that some of the
+ characters in the Unicode string could not be
+ rendered and were skipped.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutOutputString (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN CHAR16 *WString
+ );
+
+/**
+ Verifies that all characters in a Unicode string can be output to the
+ target device.
+
+ Implements SIMPLE_TEXT_OUTPUT.TestString().
+ If one of the characters in the *Wstring is neither valid valid Unicode
+ drawing characters, not ASCII code, then this function will return
+ EFI_UNSUPPORTED
+
+ @param This Protocol instance pointer.
+ @param WString The NULL-terminated Unicode string to be examined for the output
+ device(s).
+
+ @retval EFI_SUCCESS The device(s) are capable of rendering the output string.
+ @retval EFI_UNSUPPORTED Some of the characters in the Unicode string cannot be
+ rendered by one or more of the output devices mapped
+ by the EFI handle.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutTestString (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN CHAR16 *WString
+ );
+
+/**
+ Returns information for an available text mode that the output device(s)
+ supports
+
+ Implements SIMPLE_TEXT_OUTPUT.QueryMode().
+ It returnes information for an available text mode that the Graphics Console supports.
+ In this driver,we only support text mode 80x25, which is defined as mode 0.
+
+ @param This Protocol instance pointer.
+ @param ModeNumber The mode number to return information on.
+ @param Columns The returned columns of the requested mode.
+ @param Rows The returned rows of the requested mode.
+
+ @retval EFI_SUCCESS The requested mode information is returned.
+ @retval EFI_UNSUPPORTED The mode number is not valid.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutQueryMode (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN ModeNumber,
+ OUT UINTN *Columns,
+ OUT UINTN *Rows
+ );
+
+
+/**
+ Sets the output device(s) to a specified mode.
+
+ Implements SIMPLE_TEXT_OUTPUT.SetMode().
+ Set the Graphics Console to a specified mode. In this driver, we only support mode 0.
+
+ @param This Protocol instance pointer.
+ @param ModeNumber The text mode to set.
+
+ @retval EFI_SUCCESS The requested text mode is set.
+ @retval EFI_DEVICE_ERROR The requested text mode cannot be set because of
+ Graphics Console device error.
+ @retval EFI_UNSUPPORTED The text mode number is not valid.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutSetMode (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN ModeNumber
+ );
+
+/**
+ Sets the background and foreground colors for the OutputString () and
+ ClearScreen () functions.
+
+ Implements SIMPLE_TEXT_OUTPUT.SetAttribute().
+
+ @param This Protocol instance pointer.
+ @param Attribute The attribute to set. Bits 0..3 are the foreground
+ color, and bits 4..6 are the background color.
+ All other bits are undefined and must be zero.
+
+ @retval EFI_SUCCESS The requested attribute is set.
+ @retval EFI_DEVICE_ERROR The requested attribute cannot be set due to Graphics Console port error.
+ @retval EFI_UNSUPPORTED The attribute requested is not defined.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutSetAttribute (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN Attribute
+ );
+
+/**
+ Clears the output device(s) display to the currently selected background
+ color.
+
+ Implements SIMPLE_TEXT_OUTPUT.ClearScreen().
+
+ @param This Protocol instance pointer.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
+ @retval EFI_UNSUPPORTED The output device is not in a valid text mode.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutClearScreen (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This
+ );
+
+/**
+ Sets the current coordinates of the cursor position.
+
+ Implements SIMPLE_TEXT_OUTPUT.SetCursorPosition().
+
+ @param This Protocol instance pointer.
+ @param Column The position to set the cursor to. Must be greater than or
+ equal to zero and less than the number of columns and rows
+ by QueryMode ().
+ @param Row The position to set the cursor to. Must be greater than or
+ equal to zero and less than the number of columns and rows
+ by QueryMode ().
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
+ @retval EFI_UNSUPPORTED The output device is not in a valid text mode, or the
+ cursor position is invalid for the current mode.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutSetCursorPosition (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN UINTN Column,
+ IN UINTN Row
+ );
+
+
+/**
+ Makes the cursor visible or invisible.
+
+ Implements SIMPLE_TEXT_OUTPUT.EnableCursor().
+
+ @param This Protocol instance pointer.
+ @param Visible If TRUE, the cursor is set to be visible, If FALSE,
+ the cursor is set to be invisible.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleConOutEnableCursor (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN BOOLEAN Visible
+ );
+
+/**
+ Test to see if Graphics Console could be supported on the Controller.
+
+ Graphics Console could be supported if Graphics Output Protocol exists
+ on the Controller.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to test.
+ @param RemainingDevicePath Optional parameter use to pick a specific child
+ device to start.
+
+ @retval EFI_SUCCESS This driver supports this device.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleControllerDriverSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+
+/**
+ Start this driver on Controller by opening the Graphics Output Protocol,
+ and installing Simple Text Out protocol on Controller.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to bind driver to
+ @param RemainingDevicePath Optional parameter use to pick a specific child
+ device to start.
+
+ @retval EFI_SUCCESS This driver is added to Controller.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleControllerDriverStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+/**
+ Stop this driver on Controller by removing Simple Text Out protocol
+ and closing the Graphics Output Protocol on Controller.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to stop driver on
+ @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
+ children is zero stop the entire bus driver.
+ @param ChildHandleBuffer List of Child Handles to Stop.
+
+ @retval EFI_SUCCESS This driver is removed Controller.
+ @retval EFI_NOT_STARTED Simple Text Out protocol could not be found the
+ Controller.
+ @retval other This driver was not removed from this device.
+
+**/
+EFI_STATUS
+EFIAPI
+GraphicsConsoleControllerDriverStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ );
+
+
+/**
+ Locate HII Database protocol and HII Font protocol.
+
+ @retval EFI_SUCCESS HII Database protocol and HII Font protocol
+ are located successfully.
+ @return other Failed to locate HII Database protocol or
+ HII Font protocol.
+
+**/
+EFI_STATUS
+EfiLocateHiiProtocol (
+ VOID
+ );
+
+
+/**
+ Gets Graphics Console devcie's foreground color and background color.
+
+ @param This Protocol instance pointer.
+ @param Foreground Returned text foreground color.
+ @param Background Returned text background color.
+
+ @retval EFI_SUCCESS It returned always.
+
+**/
+EFI_STATUS
+GetTextColors (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Foreground,
+ OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Background
+ );
+
+/**
+ Draw Unicode string on the Graphics Console device's screen.
+
+ @param This Protocol instance pointer.
+ @param UnicodeWeight One Unicode string to be displayed.
+ @param Count The count of Unicode string.
+
+ @retval EFI_OUT_OF_RESOURCES If no memory resource to use.
+ @retval EFI_UNSUPPORTED If no Graphics Output Protocol exists.
+ @retval EFI_SUCCESS Drawing Unicode string implemented successfully.
+
+**/
+EFI_STATUS
+DrawUnicodeWeightAtCursorN (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
+ IN CHAR16 *UnicodeWeight,
+ IN UINTN Count
+ );
+
+/**
+ Flush the cursor on the screen.
+
+ If CursorVisible is FALSE, nothing to do and return directly.
+ If CursorVisible is TRUE,
+ i) If the cursor shows on screen, it will be erased.
+ ii) If the cursor does not show on screen, it will be shown.
+
+ @param This Protocol instance pointer.
+
+ @retval EFI_SUCCESS The cursor is erased successfully.
+
+**/
+EFI_STATUS
+FlushCursor (
+ IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This
+ );
+
+/**
+ Check if the current specific mode supported the user defined resolution
+ for the Graphics Console device based on Graphics Output Protocol.
+
+ If yes, set the graphic device's current mode to this specific mode.
+
+ @param GraphicsOutput Graphics Output Protocol instance pointer.
+ @param HorizontalResolution User defined horizontal resolution
+ @param VerticalResolution User defined vertical resolution.
+ @param CurrentModeNumber Current specific mode to be check.
+
+ @retval EFI_SUCCESS The mode is supported.
+ @retval EFI_UNSUPPORTED The specific mode is out of range of graphics
+ device supported.
+ @retval other The specific mode does not support user defined
+ resolution or failed to set the current mode to the
+ specific mode on graphics device.
+
+**/
+EFI_STATUS
+CheckModeSupported (
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
+ IN UINT32 HorizontalResolution,
+ IN UINT32 VerticalResolution,
+ OUT UINT32 *CurrentModeNumber
+ );
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
new file mode 100644
index 000000000000..cf359b414682
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
@@ -0,0 +1,74 @@
+#/** @file
+#
+# Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = GraphicsConsoleDxe
+ MODULE_UNI_FILE = GraphicsConsoleDxe.uni
+ FILE_GUID = CCCB0C28-4B24-11d5-9A5A-0090273FC14D
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.1
+ ENTRY_POINT = InitializeGraphicsConsole
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC AARCH64
+#
+# DRIVER_BINDING = gGraphicsConsoleDriverBinding
+# COMPONENT_NAME = gGraphicsConsoleComponentName
+# COMPONENT_NAME2 = gGraphicsConsoleComponentName2
+#
+
+[Sources]
+ ComponentName.c
+ NewFont.c
+ GraphicsConsole.c
+ GraphicsConsole.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ UefiBootServicesTableLib
+ UefiRuntimeServicesTableLib
+ MemoryAllocationLib
+ BmpSupportLib
+ BaseMemoryLib
+ UefiLib
+ UefiDriverEntryPoint
+ DebugLib
+ HiiLib
+ PcdLib
+
+[Protocols]
+ gEfiDevicePathProtocolGuid
+ gEfiSimpleTextOutProtocolGuid
+ gEfiGraphicsOutputProtocolGuid
+ gEfiHiiFontProtocolGuid
+ gEfiHiiDatabaseProtocolGuid
+ gExtendedTextOutputProtocolGuid
+
+[FeaturePcd]
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution ## SOMETIMES_CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution ## SOMETIMES_CONSUMES
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ GraphicsConsoleDxeExtra.uni
diff --git a/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.uni b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.uni
new file mode 100644
index 000000000000..09336b5cae36
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.uni
@@ -0,0 +1,19 @@
+/** @file
+ *
+ * Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#string STR_MODULE_ABSTRACT #language en-US "Console support on graphic devices"
+
+#string STR_MODULE_DESCRIPTION #language en-US "Install SimpleTextOutputProtocol on GraphicsOutputProtocol devices\n"
+
--git a/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxeExtra.uni b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxeExtra.uni
new file mode 100644
index 000000000000..cb8a6e0dbb5e
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxeExtra.uni
@@ -0,0 +1,20 @@
+/** @file
+ *
+ * Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
+"Graphics Console DXE Driver"
+
+
diff --git a/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/NewFont.c b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/NewFont.c
new file mode 100644
index 000000000000..6331b89b10dd
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/NewFont.c
@@ -0,0 +1,288 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+/*
+ * Based on ftp://www.unicode.org/Public/MAPPINGS/VENDORS/MICSFT/PC/CP437.TXT and
+ * https://en.wikipedia.org/wiki/Code_page_437 for the cp437 Unicode equivalents
+ * and the cp437 8x19 font from that_editor.
+ *
+ * https://github.com/bisqwit/that_editor/blob/master/8x19.inc
+ * https://github.com/bisqwit/that_editor/blob/master/sourcematerial/vga8x19.bdf
+ * https://github.com/stsp/dosemu2/blob/master/COPYING.DOSEMU
+ */
+
+#include "GraphicsConsole.h"
+
+EFI_NARROW_GLYPH gUsStdNarrowGlyphData[] = {
+ { 0x263a, 0x00, {0x00,0x00,0x7E,0x81,0xA5,0xA5,0x81,0x81,0xA5,0xA5,0x99,0x81,0x81,0x7E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x263b, 0x00, {0x00,0x00,0x7E,0xFF,0xDB,0xFF,0xFF,0xFF,0xDB,0xE7,0xFF,0xFF,0xFF,0x7E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2665, 0x00, {0x00,0x00,0x00,0x00,0x00,0x6C,0xFE,0xFE,0xFE,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2666, 0x00, {0x00,0x00,0x00,0x00,0x00,0x10,0x38,0x7C,0xFE,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2663, 0x00, {0x00,0x00,0x00,0x18,0x3C,0x3C,0xFF,0xE7,0xE7,0xE7,0xFF,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2660, 0x00, {0x00,0x00,0x00,0x18,0x3C,0x7E,0xFF,0xFF,0xFF,0x7E,0x7E,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2022, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x3C,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25d8, 0x00, {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}},
+ { 0x25cb, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x66,0x42,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25d9, 0x00, {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDB,0x99,0xBD,0xBD,0x99,0xDB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}},
+ { 0x2642, 0x00, {0x00,0x00,0x1E,0x06,0x0E,0x0A,0x1A,0x78,0xCC,0xCC,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2640, 0x00, {0x00,0x00,0x3C,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x266a, 0x00, {0x00,0x00,0x3F,0x33,0x33,0x3F,0x30,0x30,0x30,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x266b, 0x00, {0x00,0x00,0x7F,0x63,0x63,0x7F,0x63,0x63,0x63,0x63,0x63,0x67,0xE7,0xE6,0xC0,0x00,0x00,0x00,0x00}},
+ { 0x263c, 0x00, {0x00,0x00,0x00,0x18,0x18,0xDB,0xFF,0x3C,0xE7,0x3C,0xFF,0xDB,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25ba, 0x00, {0x00,0x80,0xC0,0xE0,0xF0,0xF8,0xFC,0xFE,0xFC,0xF8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25c4, 0x00, {0x00,0x02,0x06,0x0E,0x1E,0x3E,0x7E,0xFE,0x7E,0x3E,0x1E,0x0E,0x06,0x02,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2195, 0x00, {0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x203c, 0x00, {0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x66,0x66,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00b6, 0x00, {0x00,0x00,0x7F,0xDB,0xDB,0xDB,0xDB,0x7B,0x1B,0x1B,0x1B,0x1B,0x1B,0x1B,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00a7, 0x00, {0x00,0x00,0x7C,0xC6,0x62,0x30,0x78,0x4C,0x64,0x3C,0x18,0x8C,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25ac, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x21a8, 0x00, {0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x18,0x18,0x7E,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2191, 0x00, {0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2193, 0x00, {0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2192, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x0C,0xFE,0x0C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2190, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x60,0xFE,0x60,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x221f, 0x00, {0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2194, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x6C,0xFE,0x6C,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25b2, 0x00, {0x00,0x00,0x00,0x00,0x00,0x10,0x38,0x38,0x7C,0x7C,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25bc, 0x00, {0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x7C,0x7C,0x38,0x38,0x10,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0020, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0021, 0x00, {0x00,0x00,0x18,0x3C,0x3C,0x3C,0x3C,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0022, 0x00, {0x66,0x66,0x66,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0023, 0x00, {0x00,0x00,0x00,0x6C,0x6C,0x6C,0xFE,0x6C,0x6C,0x6C,0xFE,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0024, 0x00, {0x10,0x10,0x7C,0xD6,0xD6,0xD2,0x70,0x38,0x1C,0x16,0x96,0xD6,0xD6,0x7C,0x10,0x10,0x00,0x00,0x00}},
+ { 0x0025, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xC2,0xC6,0x0C,0x18,0x30,0x60,0xC6,0x86,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0026, 0x00, {0x00,0x00,0x38,0x6C,0x6C,0x6C,0x38,0x76,0xDC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0027, 0x00, {0x30,0x30,0x30,0x30,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0028, 0x00, {0x00,0x00,0x0C,0x18,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x18,0x0C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0029, 0x00, {0x00,0x00,0x30,0x18,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x18,0x30,0x00,0x00,0x00,0x00,0x00}},
+ { 0x002a, 0x00, {0x00,0x00,0x00,0x00,0x00,0x66,0x24,0x3C,0xFF,0x3C,0x24,0x66,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x002b, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x002c, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x18,0x30,0x00,0x00,0x00,0x00}},
+ { 0x002d, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x002e, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x002f, 0x00, {0x00,0x00,0x00,0x00,0x00,0x02,0x06,0x0C,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0030, 0x00, {0x00,0x00,0x38,0x6C,0xC6,0xC6,0xC6,0xD6,0xD6,0xC6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0031, 0x00, {0x00,0x00,0x18,0x38,0x78,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0032, 0x00, {0x00,0x00,0x7C,0xC6,0x06,0x06,0x0C,0x18,0x30,0x60,0xC0,0xC0,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0033, 0x00, {0x00,0x00,0x7C,0xC6,0x06,0x06,0x06,0x3C,0x06,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0034, 0x00, {0x00,0x00,0x0C,0x1C,0x3C,0x6C,0xCC,0xFE,0x0C,0x0C,0x0C,0x0C,0x0C,0x1E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0035, 0x00, {0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xC0,0xFC,0x06,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0036, 0x00, {0x00,0x00,0x38,0x60,0xC0,0xC0,0xC0,0xFC,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0037, 0x00, {0x00,0x00,0xFE,0xC6,0x06,0x06,0x06,0x0C,0x18,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0038, 0x00, {0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0039, 0x00, {0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x06,0x06,0x06,0x0C,0x78,0x00,0x00,0x00,0x00,0x00}},
+ { 0x003a, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x003b, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x18,0x30,0x00,0x00,0x00,0x00}},
+ { 0x003c, 0x00, {0x00,0x00,0x00,0x06,0x0C,0x18,0x30,0x60,0xC0,0x60,0x30,0x18,0x0C,0x06,0x00,0x00,0x00,0x00,0x00}},
+ { 0x003d, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7E,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x003e, 0x00, {0x00,0x00,0x00,0xC0,0x60,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x60,0xC0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x003f, 0x00, {0x00,0x00,0x7C,0xC6,0x86,0x06,0x0C,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0040, 0x00, {0x00,0x00,0x00,0x7C,0xC6,0xC6,0xCE,0xDE,0xDE,0xDE,0xDE,0xCC,0xC0,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0041, 0x00, {0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0042, 0x00, {0x00,0x00,0xFC,0x66,0x66,0x66,0x66,0x7C,0x66,0x66,0x66,0x66,0x66,0xFC,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0043, 0x00, {0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0044, 0x00, {0x00,0x00,0xF8,0x6C,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x6C,0xF8,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0045, 0x00, {0x00,0x00,0xFE,0x66,0x62,0x62,0x68,0x78,0x68,0x60,0x62,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0046, 0x00, {0x00,0x00,0xFE,0x66,0x62,0x62,0x68,0x78,0x68,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0047, 0x00, {0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC0,0xDE,0xC6,0xC6,0x66,0x3A,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0048, 0x00, {0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0049, 0x00, {0x00,0x00,0x3C,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x004a, 0x00, {0x00,0x00,0x1E,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0xCC,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,0x00}},
+ { 0x004b, 0x00, {0x00,0x00,0xE6,0x66,0x66,0x66,0x6C,0x78,0x78,0x6C,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x004c, 0x00, {0x00,0x00,0xF0,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x62,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x004d, 0x00, {0x00,0x00,0xC6,0xEE,0xFE,0xD6,0xD6,0xD6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x004e, 0x00, {0x00,0x00,0xC6,0xE6,0xF6,0xDE,0xCE,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x004f, 0x00, {0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0050, 0x00, {0x00,0x00,0xFC,0x66,0x66,0x66,0x66,0x7C,0x60,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0051, 0x00, {0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xD6,0xDE,0x7C,0x0C,0x0E,0x00,0x00,0x00}},
+ { 0x0052, 0x00, {0x00,0x00,0xFC,0x66,0x66,0x66,0x66,0x7C,0x6C,0x66,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0053, 0x00, {0x00,0x00,0x7C,0xC6,0xC6,0xC2,0x60,0x38,0x0C,0x06,0x86,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0054, 0x00, {0x00,0x00,0x7E,0x7E,0x5A,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0055, 0x00, {0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0056, 0x00, {0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x6C,0x38,0x10,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0057, 0x00, {0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0xEE,0x6C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0058, 0x00, {0x00,0x00,0xC6,0xC6,0x6C,0x6C,0x38,0x38,0x38,0x38,0x6C,0x6C,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0059, 0x00, {0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x005a, 0x00, {0x00,0x00,0xFE,0xC6,0x86,0x86,0x0C,0x18,0x30,0x60,0xC2,0xC2,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x005b, 0x00, {0x00,0x00,0x3C,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x005c, 0x00, {0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x60,0x30,0x18,0x0C,0x06,0x02,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x005d, 0x00, {0x00,0x00,0x3C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x005e, 0x00, {0x00,0x10,0x38,0x6C,0xC6,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x005f, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00}},
+ { 0x0060, 0x00, {0x30,0x30,0x30,0x30,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0061, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x0C,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0062, 0x00, {0x00,0x00,0xE0,0x60,0x60,0x60,0x78,0x6C,0x66,0x66,0x66,0x66,0x66,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0063, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC0,0xC0,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0064, 0x00, {0x00,0x00,0x1C,0x0C,0x0C,0x0C,0x3C,0x6C,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0065, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0066, 0x00, {0x00,0x00,0x1C,0x36,0x32,0x30,0x78,0x30,0x30,0x30,0x30,0x30,0x30,0x78,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0067, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x76,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x7C,0x0C,0x0C,0xCC,0x78,0x00}},
+ { 0x0068, 0x00, {0x00,0x00,0xE0,0x60,0x60,0x60,0x6C,0x76,0x66,0x66,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0069, 0x00, {0x00,0x00,0x00,0x18,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x006a, 0x00, {0x00,0x00,0x00,0x0C,0x0C,0x00,0x1C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0xCC,0xCC,0xCC,0x78,0x00}},
+ { 0x006b, 0x00, {0x00,0x00,0xE0,0x60,0x60,0x60,0x66,0x6C,0x78,0x78,0x6C,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x006c, 0x00, {0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x006d, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x6C,0xFE,0xD6,0xD6,0xD6,0xD6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x006e, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,0x00}},
+ { 0x006f, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0070, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0x60,0x60,0xF0,0x00}},
+ { 0x0071, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x76,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x7C,0x0C,0x0C,0x0C,0x1E,0x00}},
+ { 0x0072, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x76,0x66,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0073, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC2,0x78,0x0C,0x86,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0074, 0x00, {0x00,0x00,0x10,0x30,0x30,0x30,0xFC,0x30,0x30,0x30,0x30,0x30,0x36,0x1C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0075, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0076, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0077, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0x6C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0078, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xC6,0x6C,0x38,0x10,0x38,0x6C,0xC6,0x82,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0079, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x06,0x0C,0xF8,0x00}},
+ { 0x007a, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xCC,0x18,0x30,0x60,0xC0,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x007b, 0x00, {0x00,0x00,0x0E,0x18,0x18,0x18,0x18,0x70,0x18,0x18,0x18,0x18,0x18,0x0E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x007c, 0x00, {0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x007d, 0x00, {0x00,0x00,0x70,0x18,0x18,0x18,0x18,0x0E,0x18,0x18,0x18,0x18,0x18,0x70,0x00,0x00,0x00,0x00,0x00}},
+ { 0x007e, 0x00, {0x00,0x76,0xD4,0x9C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2302, 0x00, {0x00,0x00,0x00,0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xC6,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00c7, 0x00, {0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x0C,0x06,0x7C,0x00,0x00,0x00}},
+ { 0x00fc, 0x00, {0x00,0x00,0x00,0xCC,0xCC,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e9, 0x00, {0x00,0x0C,0x18,0x30,0x00,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e2, 0x00, {0x00,0x10,0x38,0x6C,0x00,0x00,0x78,0x0C,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e4, 0x00, {0x00,0x00,0x00,0xCC,0xCC,0x00,0x78,0x0C,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e0, 0x00, {0x00,0x60,0x30,0x18,0x0C,0x00,0x78,0x0C,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e5, 0x00, {0x00,0x38,0x6C,0x6C,0x38,0x00,0x78,0x0C,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e7, 0x00, {0x00,0x00,0x00,0x00,0x3C,0x66,0x62,0x60,0x60,0x66,0x64,0x3C,0x0C,0x06,0x3C,0x00,0x00,0x00,0x00}},
+ { 0x00ea, 0x00, {0x00,0x10,0x38,0x6C,0x44,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00eb, 0x00, {0x00,0x00,0x00,0xC6,0xC6,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e8, 0x00, {0x00,0x60,0x30,0x18,0x0C,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ef, 0x00, {0x00,0x00,0x00,0x66,0x66,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ee, 0x00, {0x00,0x18,0x3C,0x66,0x42,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ec, 0x00, {0x00,0x60,0x30,0x18,0x08,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00c4, 0x00, {0xC6,0xC6,0x10,0x38,0x6C,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00c5, 0x00, {0x38,0x28,0x38,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00c9, 0x00, {0x18,0x30,0x60,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00e6, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xCC,0x76,0x36,0x36,0x7E,0xD8,0xD8,0x6E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00c6, 0x00, {0x00,0x00,0x3E,0x6C,0xCC,0xCC,0xFE,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00f4, 0x00, {0x00,0x10,0x38,0x6C,0x44,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00f6, 0x00, {0x00,0x00,0x00,0xC6,0xC6,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00f2, 0x00, {0x00,0x60,0x30,0x18,0x0C,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00fb, 0x00, {0x00,0x30,0x78,0xCC,0x84,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00f9, 0x00, {0x00,0x60,0x30,0x18,0x0C,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ff, 0x00, {0x00,0x00,0x00,0xC6,0xC6,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x06,0x0C,0x78,0x00}},
+ { 0x00d6, 0x00, {0xC6,0xC6,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00dc, 0x00, {0xC6,0xC6,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00a2, 0x00, {0x08,0x08,0x3C,0x6E,0xCA,0xC8,0xC8,0xC8,0xC8,0xC8,0xC8,0xCA,0x6E,0x3C,0x08,0x08,0x00,0x00,0x00}},
+ { 0x00a3, 0x00, {0x00,0x38,0x6C,0x64,0x64,0x60,0xF0,0x60,0x60,0x60,0x60,0x62,0xE6,0xFC,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00a5, 0x00, {0x00,0x00,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x18,0x7E,0x18,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x20a7, 0x00, {0x00,0xF8,0xCC,0xCC,0xFC,0xF8,0xC4,0xCC,0xDE,0xCC,0xCC,0xCC,0xCC,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0192, 0x00, {0x00,0x0E,0x1B,0x19,0x18,0x18,0x18,0x7E,0x18,0x18,0x18,0x18,0x18,0x98,0xD8,0x70,0x00,0x00,0x00}},
+ { 0x00e1, 0x00, {0x00,0x18,0x30,0x60,0xC0,0x00,0x78,0x0C,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ed, 0x00, {0x00,0x0C,0x18,0x30,0x20,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00f3, 0x00, {0x00,0x18,0x30,0x60,0x40,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00fa, 0x00, {0x00,0x18,0x30,0x60,0x40,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00f1, 0x00, {0x00,0x00,0x36,0xD4,0x88,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00d1, 0x00, {0x36,0xCC,0x00,0xC6,0xE6,0xF6,0xDE,0xCE,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00aa, 0x00, {0x00,0x3C,0x6C,0x6C,0x6C,0x3E,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ba, 0x00, {0x00,0x38,0x6C,0x6C,0x6C,0x38,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00bf, 0x00, {0x00,0x00,0x30,0x30,0x00,0x30,0x30,0x30,0x60,0xC0,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2310, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ac, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0x06,0x06,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00bd, 0x00, {0x00,0xC0,0xC0,0xC0,0xC2,0xC6,0x0C,0x18,0x30,0x60,0xC0,0x9C,0x06,0x0C,0x18,0x3E,0x00,0x00,0x00}},
+ { 0x00bc, 0x00, {0x00,0xC0,0xC0,0xC0,0xC2,0xC6,0x0C,0x18,0x30,0x66,0xCE,0x9A,0x32,0x3E,0x06,0x06,0x00,0x00,0x00}},
+ { 0x00a1, 0x00, {0x00,0x00,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x3C,0x3C,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00ab, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x36,0x6C,0xD8,0xD8,0x6C,0x36,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00bb, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0xD8,0x6C,0x36,0x36,0x6C,0xD8,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2591, 0x00, {0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11}},
+ { 0x2592, 0x00, {0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55}},
+ { 0x2593, 0x00, {0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD}},
+ { 0x2502, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2524, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2561, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2562, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2556, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2555, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2563, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2551, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2557, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x255d, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x255c, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x255b, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2510, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2514, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2534, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x252c, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x251c, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2500, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x253c, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x255e, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x255f, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x255a, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2554, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2569, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2566, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2560, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2550, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x256c, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2567, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2568, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2564, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2565, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x2559, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2558, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2552, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2553, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x256b, 0x00, {0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36}},
+ { 0x256a, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2518, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x250c, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2588, 0x00, {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}},
+ { 0x2584, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}},
+ { 0x258c, 0x00, {0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0}},
+ { 0x2590, 0x00, {0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F}},
+ { 0x2580, 0x00, {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03b1, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0xD8,0xD8,0xD8,0xD8,0xDC,0x76,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00df, 0x00, {0x00,0x00,0x78,0xCC,0xCC,0xCC,0xCC,0xD8,0xCC,0xC6,0xC6,0xC6,0xC6,0xCC,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0393, 0x00, {0x00,0x00,0xFE,0xC6,0xC6,0xC6,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03c0, 0x00, {0x00,0x00,0x00,0x00,0xFE,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03a3, 0x00, {0x00,0x00,0x00,0xFE,0xC6,0xC2,0x60,0x30,0x18,0x30,0x60,0xC2,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03c3, 0x00, {0x00,0x00,0x00,0x00,0x00,0x7E,0xD8,0xD8,0xD8,0xD8,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00b5, 0x00, {0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0x60,0xC0,0x00,0x00,0x00,0x00}},
+ { 0x03c4, 0x00, {0x00,0x00,0x00,0x00,0x76,0xDC,0x98,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03a6, 0x00, {0x00,0x00,0x00,0x7E,0x18,0x3C,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0398, 0x00, {0x00,0x00,0x00,0x38,0x6C,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03a9, 0x00, {0x00,0x00,0x38,0x6C,0xC6,0xC6,0xC6,0xC6,0x6C,0x6C,0x6C,0x6C,0x6C,0xEE,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03b4, 0x00, {0x00,0x00,0x1E,0x20,0x30,0x18,0x0C,0x3E,0x66,0x66,0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x221e, 0x00, {0x00,0x00,0x00,0x00,0x00,0x7E,0xDB,0xDB,0xDB,0xDB,0xDB,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03c6, 0x00, {0x00,0x00,0x00,0x03,0x06,0x7E,0xDB,0xDB,0xDB,0xDB,0xD3,0x7E,0x60,0xC0,0x00,0x00,0x00,0x00,0x00}},
+ { 0x03b5, 0x00, {0x00,0x00,0x1C,0x30,0x60,0x60,0x60,0x7C,0x60,0x60,0x60,0x60,0x30,0x1C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2229, 0x00, {0x00,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2261, 0x00, {0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00b1, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2265, 0x00, {0x00,0x00,0x00,0x60,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x60,0x00,0x7E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2264, 0x00, {0x00,0x00,0x00,0x06,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x06,0x00,0x7E,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2320, 0x00, {0x00,0x00,0x0E,0x1B,0x1B,0x1B,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18}},
+ { 0x2321, 0x00, {0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xD8,0xD8,0xD8,0x70,0x00,0x00}},
+ { 0x00f7, 0x00, {0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x7E,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2248, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00b0, 0x00, {0x00,0x38,0x6C,0x6C,0x6C,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x2219, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00b7, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x221a, 0x00, {0x00,0x0F,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0xEC,0x6C,0x6C,0x6C,0x3C,0x1C,0x00,0x00,0x00,0x00,0x00}},
+ { 0x207f, 0x00, {0x00,0xD8,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00b2, 0x00, {0x00,0x70,0xD8,0x10,0x30,0x60,0xC8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x25a0, 0x00, {0x00,0x00,0x00,0x00,0x00,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x00a0, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
+ { 0x0000, 0x00, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}} //EOL
+};
+
+// Get available Unicode glyphs narrow fonts(8*19 pixels) size.
+UINT32 mNarrowFontSize = sizeof (gUsStdNarrowGlyphData);
+
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/ComponentName.c b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/ComponentName.c
new file mode 100644
index 000000000000..80eb4ff9a870
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/ComponentName.c
@@ -0,0 +1,163 @@
+/** @file
+ *
+ * Component Name Protocol implementation for the MMC DXE driver
+ *
+ * Copyright (c) 2011, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "Mmc.h"
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gMmcComponentName = {
+ MmcGetDriverName,
+ MmcGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gMmcComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) MmcGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) MmcGetControllerName,
+ "en"
+};
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE
+mMmcDriverNameTable[] = {
+ {"eng;en", L"MMC/SD Card Interface Driver"},
+ {NULL, NULL}
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+ @param Language A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+ @param DriverName A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+MmcGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mMmcDriverNameTable,
+ DriverName,
+ (BOOLEAN)(This == &gMmcComponentName)
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+ @param ControllerHandle The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+ @param ChildHandle The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+ @param Language A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+ @param ControllerName A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+ @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+MmcGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ return EFI_UNSUPPORTED;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Diagnostics.c b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Diagnostics.c
new file mode 100644
index 000000000000..f0ff16708b67
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Diagnostics.c
@@ -0,0 +1,256 @@
+/** @file
+ *
+ * Diagnostics Protocol implementation for the MMC DXE driver
+ *
+ * Copyright (c) 2011-2014, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Uefi.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseLib.h>
+
+#include "Mmc.h"
+
+#define DIAGNOSTIC_LOGBUFFER_MAXCHAR 1024
+
+CHAR16* mLogBuffer = NULL;
+UINTN mLogRemainChar = 0;
+
+CHAR16*
+DiagnosticInitLog (
+ UINTN MaxBufferChar
+ )
+{
+ mLogRemainChar = MaxBufferChar;
+ mLogBuffer = AllocatePool ((UINTN)MaxBufferChar * sizeof (CHAR16));
+ return mLogBuffer;
+}
+
+UINTN
+DiagnosticLog (
+ CONST CHAR16* Str
+ )
+{
+ UINTN len = StrLen (Str);
+ if (len < mLogRemainChar) {
+ StrCpyS (mLogBuffer, mLogRemainChar, Str);
+ mLogRemainChar -= len;
+ mLogBuffer += len;
+ return len;
+ } else {
+ return 0;
+ }
+}
+
+VOID
+GenerateRandomBuffer (
+ VOID* Buffer,
+ UINTN BufferSize
+ )
+{
+ UINT64 i;
+ UINT64* Buffer64 = (UINT64*)Buffer;
+
+ for (i = 0; i < (BufferSize >> 3); i++) {
+ *Buffer64 = i | (~i << 32);
+ Buffer64++;
+ }
+}
+
+BOOLEAN
+CompareBuffer (
+ VOID *BufferA,
+ VOID *BufferB,
+ UINTN BufferSize
+ )
+{
+ UINTN i;
+ UINT64* BufferA64 = (UINT64*)BufferA;
+ UINT64* BufferB64 = (UINT64*)BufferB;
+
+ for (i = 0; i < (BufferSize >> 3); i++) {
+ if (*BufferA64 != *BufferB64) {
+ DEBUG ((DEBUG_ERROR, "CompareBuffer: Error at %i", i));
+ DEBUG ((DEBUG_ERROR, "(0x%lX) != (0x%lX)\n", *BufferA64, *BufferB64));
+ return FALSE;
+ }
+ BufferA64++;
+ BufferB64++;
+ }
+ return TRUE;
+}
+
+EFI_STATUS
+MmcReadWriteDataTest (
+ MMC_HOST_INSTANCE *MmcHostInstance,
+ EFI_LBA Lba,
+ UINTN BufferSize
+ )
+{
+ VOID *BackBuffer;
+ VOID *WriteBuffer;
+ VOID *ReadBuffer;
+ EFI_STATUS Status;
+
+ // Check if a Media is Present
+ if (!MmcHostInstance->BlockIo.Media->MediaPresent) {
+ DiagnosticLog (L"ERROR: No Media Present\n");
+ return EFI_NO_MEDIA;
+ }
+
+ if (MmcHostInstance->State != MmcTransferState) {
+ DiagnosticLog (L"ERROR: Not ready for Transfer state\n");
+ return EFI_NOT_READY;
+ }
+
+ BackBuffer = AllocatePool (BufferSize);
+ WriteBuffer = AllocatePool (BufferSize);
+ ReadBuffer = AllocatePool (BufferSize);
+
+ // Read (and save) buffer at a specific location
+ Status = MmcReadBlocks (&(MmcHostInstance->BlockIo), MmcHostInstance->BlockIo.Media->MediaId,Lba,BufferSize,BackBuffer);
+ if (Status != EFI_SUCCESS) {
+ DiagnosticLog (L"ERROR: Fail to Read Block (1)\n");
+ return Status;
+ }
+
+ // Write buffer at the same location
+ GenerateRandomBuffer (WriteBuffer,BufferSize);
+ Status = MmcWriteBlocks (&(MmcHostInstance->BlockIo), MmcHostInstance->BlockIo.Media->MediaId,Lba,BufferSize,WriteBuffer);
+ if (Status != EFI_SUCCESS) {
+ DiagnosticLog (L"ERROR: Fail to Write Block (1)\n");
+ return Status;
+ }
+
+ // Read the buffer at the same location
+ Status = MmcReadBlocks (&(MmcHostInstance->BlockIo), MmcHostInstance->BlockIo.Media->MediaId,Lba,BufferSize,ReadBuffer);
+ if (Status != EFI_SUCCESS) {
+ DiagnosticLog (L"ERROR: Fail to Read Block (2)\n");
+ return Status;
+ }
+
+ // Check that is conform
+ if (!CompareBuffer (ReadBuffer,WriteBuffer,BufferSize)) {
+ DiagnosticLog (L"ERROR: Fail to Read/Write Block (1)\n");
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Restore content at the original location
+ Status = MmcWriteBlocks (&(MmcHostInstance->BlockIo), MmcHostInstance->BlockIo.Media->MediaId,Lba,BufferSize,BackBuffer);
+ if (Status != EFI_SUCCESS) {
+ DiagnosticLog (L"ERROR: Fail to Write Block (2)\n");
+ return Status;
+ }
+
+ // Read the restored content
+ Status = MmcReadBlocks (&(MmcHostInstance->BlockIo), MmcHostInstance->BlockIo.Media->MediaId,Lba,BufferSize,ReadBuffer);
+ if (Status != EFI_SUCCESS) {
+ DiagnosticLog (L"ERROR: Fail to Read Block (3)\n");
+ return Status;
+ }
+
+ // Check the content is correct
+ if (!CompareBuffer (ReadBuffer,BackBuffer,BufferSize)) {
+ DiagnosticLog (L"ERROR: Fail to Read/Write Block (2)\n");
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+MmcDriverDiagnosticsRunDiagnostics (
+ IN EFI_DRIVER_DIAGNOSTICS_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN EFI_DRIVER_DIAGNOSTIC_TYPE DiagnosticType,
+ IN CHAR8 *Language,
+ OUT EFI_GUID **ErrorType,
+ OUT UINTN *BufferSize,
+ OUT CHAR16 **Buffer
+ )
+{
+ LIST_ENTRY *CurrentLink;
+ MMC_HOST_INSTANCE *MmcHostInstance;
+ EFI_STATUS Status;
+
+ if ((Language == NULL) ||
+ (ErrorType == NULL) ||
+ (Buffer == NULL) ||
+ (ControllerHandle == NULL) ||
+ (BufferSize == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Check Language is supported (i.e. is "en-*" - only English is supported)
+ if (AsciiStrnCmp (Language, "en", 2) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = EFI_SUCCESS;
+ *ErrorType = NULL;
+ *BufferSize = DIAGNOSTIC_LOGBUFFER_MAXCHAR;
+ *Buffer = DiagnosticInitLog (DIAGNOSTIC_LOGBUFFER_MAXCHAR);
+
+ DiagnosticLog (L"MMC Driver Diagnostics\n");
+
+ // Find the MMC Host instance on which we have been asked to run diagnostics
+ MmcHostInstance = NULL;
+ CurrentLink = mMmcHostPool.ForwardLink;
+ while (CurrentLink != NULL && CurrentLink != &mMmcHostPool && (Status == EFI_SUCCESS)) {
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_LINK(CurrentLink);
+ ASSERT(MmcHostInstance != NULL);
+ if (MmcHostInstance->MmcHandle == ControllerHandle) {
+ break;
+ }
+ CurrentLink = CurrentLink->ForwardLink;
+ }
+
+ // If we didn't find the controller, return EFI_UNSUPPORTED
+ if ((MmcHostInstance == NULL)
+ || (MmcHostInstance->MmcHandle != ControllerHandle)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ // LBA=1 Size=BlockSize
+ DiagnosticLog (L"MMC Driver Diagnostics - Test: First Block\n");
+ Status = MmcReadWriteDataTest (MmcHostInstance, 1, MmcHostInstance->BlockIo.Media->BlockSize);
+
+ // LBA=2 Size=BlockSize
+ DiagnosticLog (L"MMC Driver Diagnostics - Test: Second Block\n");
+ Status = MmcReadWriteDataTest (MmcHostInstance, 2, MmcHostInstance->BlockIo.Media->BlockSize);
+
+ // LBA=10 Size=BlockSize
+ DiagnosticLog (L"MMC Driver Diagnostics - Test: Any Block\n");
+ Status = MmcReadWriteDataTest (MmcHostInstance, MmcHostInstance->BlockIo.Media->LastBlock >> 1, MmcHostInstance->BlockIo.Media->BlockSize);
+
+ // LBA=LastBlock Size=BlockSize
+ DiagnosticLog (L"MMC Driver Diagnostics - Test: Last Block\n");
+ Status = MmcReadWriteDataTest (MmcHostInstance, MmcHostInstance->BlockIo.Media->LastBlock, MmcHostInstance->BlockIo.Media->BlockSize);
+
+ // LBA=1 Size=2*BlockSize
+ DiagnosticLog (L"MMC Driver Diagnostics - Test: First Block / 2 BlockSSize\n");
+ Status = MmcReadWriteDataTest (MmcHostInstance, 1, 2 * MmcHostInstance->BlockIo.Media->BlockSize);
+
+ return Status;
+}
+
+//
+// EFI Driver Diagnostics 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_DRIVER_DIAGNOSTICS2_PROTOCOL gMmcDriverDiagnostics2 = {
+ (EFI_DRIVER_DIAGNOSTICS2_RUN_DIAGNOSTICS) MmcDriverDiagnosticsRunDiagnostics,
+ "en"
+};
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c
new file mode 100644
index 000000000000..d90cf3018251
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c
@@ -0,0 +1,458 @@
+/** @file
+ *
+ * Main file of the MMC Dxe driver. The driver entrypoint is defined into this file.
+ *
+ * Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Protocol/DevicePath.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DevicePathLib.h>
+
+#include "Mmc.h"
+
+EFI_BLOCK_IO_MEDIA mMmcMediaTemplate = {
+ SIGNATURE_32('m','m','c','o'), // MediaId
+ TRUE, // RemovableMedia
+ FALSE, // MediaPresent
+ FALSE, // LogicalPartition
+ FALSE, // ReadOnly
+ FALSE, // WriteCaching
+ 512, // BlockSize
+ 4, // IoAlign
+ 0, // Pad
+ 0 // LastBlock
+};
+
+//
+// This device structure is serviced as a header.
+// Its next field points to the first root bridge device node.
+//
+LIST_ENTRY mMmcHostPool;
+
+/**
+ Event triggered by the timer to check if any cards have been removed
+ or if new ones have been plugged in
+**/
+
+EFI_EVENT gCheckCardsEvent;
+
+/**
+ Initialize the MMC Host Pool to support multiple MMC devices
+**/
+VOID
+InitializeMmcHostPool (
+ VOID
+ )
+{
+ InitializeListHead (&mMmcHostPool);
+}
+
+/**
+ Insert a new Mmc Host controller to the pool
+**/
+VOID
+InsertMmcHost (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ InsertTailList (&mMmcHostPool, &(MmcHostInstance->Link));
+}
+
+/*
+ Remove a new Mmc Host controller to the pool
+*/
+VOID
+RemoveMmcHost (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ RemoveEntryList (&(MmcHostInstance->Link));
+}
+
+MMC_HOST_INSTANCE* CreateMmcHostInstance (
+ IN EFI_MMC_HOST_PROTOCOL* MmcHost
+ )
+{
+ EFI_STATUS Status;
+ MMC_HOST_INSTANCE* MmcHostInstance;
+ EFI_DEVICE_PATH_PROTOCOL *NewDevicePathNode;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ MmcHostInstance = AllocateZeroPool (sizeof (MMC_HOST_INSTANCE));
+ if (MmcHostInstance == NULL) {
+ return NULL;
+ }
+
+ MmcHostInstance->Signature = MMC_HOST_INSTANCE_SIGNATURE;
+
+ MmcHostInstance->State = MmcHwInitializationState;
+
+ MmcHostInstance->BlockIo.Media = AllocateCopyPool (sizeof(EFI_BLOCK_IO_MEDIA), &mMmcMediaTemplate);
+ if (MmcHostInstance->BlockIo.Media == NULL) {
+ goto FREE_INSTANCE;
+ }
+
+ MmcHostInstance->BlockIo.Revision = EFI_BLOCK_IO_INTERFACE_REVISION;
+ MmcHostInstance->BlockIo.Reset = MmcReset;
+ MmcHostInstance->BlockIo.ReadBlocks = MmcReadBlocks;
+ MmcHostInstance->BlockIo.WriteBlocks = MmcWriteBlocks;
+ MmcHostInstance->BlockIo.FlushBlocks = MmcFlushBlocks;
+
+ MmcHostInstance->MmcHost = MmcHost;
+
+ // Create DevicePath for the new MMC Host
+ Status = MmcHost->BuildDevicePath (MmcHost, &NewDevicePathNode);
+ if (EFI_ERROR (Status)) {
+ goto FREE_MEDIA;
+ }
+
+ DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) AllocatePool (END_DEVICE_PATH_LENGTH);
+ if (DevicePath == NULL) {
+ goto FREE_MEDIA;
+ }
+
+ SetDevicePathEndNode (DevicePath);
+ MmcHostInstance->DevicePath = AppendDevicePathNode (DevicePath, NewDevicePathNode);
+
+ // Publish BlockIO protocol interface
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &MmcHostInstance->MmcHandle,
+ &gEfiBlockIoProtocolGuid,&MmcHostInstance->BlockIo,
+ &gEfiDevicePathProtocolGuid,MmcHostInstance->DevicePath,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ goto FREE_DEVICE_PATH;
+ }
+
+ return MmcHostInstance;
+
+FREE_DEVICE_PATH:
+ FreePool(DevicePath);
+
+FREE_MEDIA:
+ FreePool(MmcHostInstance->BlockIo.Media);
+
+FREE_INSTANCE:
+ FreePool(MmcHostInstance);
+
+ return NULL;
+}
+
+EFI_STATUS DestroyMmcHostInstance (
+ IN MMC_HOST_INSTANCE* MmcHostInstance
+ )
+{
+ EFI_STATUS Status;
+
+ // Uninstall Protocol Interfaces
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ MmcHostInstance->MmcHandle,
+ &gEfiBlockIoProtocolGuid,&(MmcHostInstance->BlockIo),
+ &gEfiDevicePathProtocolGuid,MmcHostInstance->DevicePath,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ // Free Memory allocated for the instance
+ if (MmcHostInstance->BlockIo.Media) {
+ FreePool(MmcHostInstance->BlockIo.Media);
+ }
+ if (MmcHostInstance->CardInfo.ECSDData) {
+ FreePages (MmcHostInstance->CardInfo.ECSDData, EFI_SIZE_TO_PAGES (sizeof (ECSD)));
+ }
+ FreePool (MmcHostInstance);
+
+ return Status;
+}
+
+/**
+ This function checks if the controller implement the Mmc Host and the Device Path Protocols
+**/
+EFI_STATUS
+EFIAPI
+MmcDriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ //EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+ EFI_DEV_PATH_PTR Node;
+
+ //
+ // Check RemainingDevicePath validation
+ //
+ if (RemainingDevicePath != NULL) {
+ //
+ // Check if RemainingDevicePath is the End of Device Path Node,
+ // if yes, go on checking other conditions
+ //
+ if (!IsDevicePathEnd (RemainingDevicePath)) {
+ //
+ // If RemainingDevicePath isn't the End of Device Path Node,
+ // check its validation
+ //
+ Node.DevPath = RemainingDevicePath;
+ if (Node.DevPath->Type != HARDWARE_DEVICE_PATH ||
+ Node.DevPath->SubType != HW_VENDOR_DP ||
+ DevicePathNodeLength(Node.DevPath) != sizeof(VENDOR_DEVICE_PATH)) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+ }
+
+ //
+ // Check if Mmc Host protocol is installed by platform
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gRaspberryPiMmcHostProtocolGuid,
+ (VOID **) &MmcHost,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (Status == EFI_ALREADY_STARTED) {
+ return EFI_SUCCESS;
+ }
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Close the Mmc Host used to perform the supported test
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gRaspberryPiMmcHostProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+
+**/
+EFI_STATUS
+EFIAPI
+MmcDriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ MMC_HOST_INSTANCE *MmcHostInstance;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+
+ //
+ // Check RemainingDevicePath validation
+ //
+ if (RemainingDevicePath != NULL) {
+ //
+ // Check if RemainingDevicePath is the End of Device Path Node,
+ // if yes, return EFI_SUCCESS
+ //
+ if (IsDevicePathEnd (RemainingDevicePath)) {
+ return EFI_SUCCESS;
+ }
+ }
+
+ //
+ // Get the Mmc Host protocol
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gRaspberryPiMmcHostProtocolGuid,
+ (VOID **) &MmcHost,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ if (Status == EFI_ALREADY_STARTED) {
+ return EFI_SUCCESS;
+ }
+ return Status;
+ }
+
+ MmcHostInstance = CreateMmcHostInstance(MmcHost);
+ if (MmcHostInstance != NULL) {
+ // Add the handle to the pool
+ InsertMmcHost (MmcHostInstance);
+
+ MmcHostInstance->Initialized = FALSE;
+
+ // Detect card presence now
+ CheckCardsCallback (NULL, NULL);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+
+**/
+EFI_STATUS
+EFIAPI
+MmcDriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status = EFI_SUCCESS;
+ LIST_ENTRY *CurrentLink;
+ MMC_HOST_INSTANCE *MmcHostInstance;
+
+ MMC_TRACE("MmcDriverBindingStop()");
+
+ // For each MMC instance
+ CurrentLink = mMmcHostPool.ForwardLink;
+ while (CurrentLink != NULL && CurrentLink != &mMmcHostPool && (Status == EFI_SUCCESS)) {
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_LINK(CurrentLink);
+ ASSERT(MmcHostInstance != NULL);
+
+ // Close gRaspberryPiMmcHostProtocolGuid
+ Status = gBS->CloseProtocol (
+ Controller,
+ &gRaspberryPiMmcHostProtocolGuid,(VOID **) &MmcHostInstance->MmcHost,
+ This->DriverBindingHandle
+ );
+
+ // Remove MMC Host Instance from the pool
+ RemoveMmcHost (MmcHostInstance);
+
+ // Destroy MmcHostInstance
+ DestroyMmcHostInstance (MmcHostInstance);
+ }
+
+ return Status;
+}
+
+VOID
+EFIAPI
+CheckCardsCallback (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ LIST_ENTRY *CurrentLink;
+ MMC_HOST_INSTANCE *MmcHostInstance;
+ EFI_STATUS Status;
+
+ CurrentLink = mMmcHostPool.ForwardLink;
+ while (CurrentLink != NULL && CurrentLink != &mMmcHostPool) {
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_LINK(CurrentLink);
+ ASSERT(MmcHostInstance != NULL);
+
+ if (MmcHostInstance->MmcHost->IsCardPresent (MmcHostInstance->MmcHost) == !MmcHostInstance->Initialized) {
+ MmcHostInstance->State = MmcHwInitializationState;
+ MmcHostInstance->BlockIo.Media->MediaPresent = !MmcHostInstance->Initialized;
+ MmcHostInstance->Initialized = !MmcHostInstance->Initialized;
+
+ if (MmcHostInstance->BlockIo.Media->MediaPresent) {
+ InitializeMmcDevice (MmcHostInstance);
+ }
+
+ Status = gBS->ReinstallProtocolInterface (
+ (MmcHostInstance->MmcHandle),
+ &gEfiBlockIoProtocolGuid,
+ &(MmcHostInstance->BlockIo),
+ &(MmcHostInstance->BlockIo)
+ );
+
+ if (EFI_ERROR(Status)) {
+ Print(L"MMC Card: Error reinstalling BlockIo interface\n");
+ }
+ }
+
+ CurrentLink = CurrentLink->ForwardLink;
+ }
+}
+
+
+EFI_DRIVER_BINDING_PROTOCOL gMmcDriverBinding = {
+ MmcDriverBindingSupported,
+ MmcDriverBindingStart,
+ MmcDriverBindingStop,
+ 0xa,
+ NULL,
+ NULL
+};
+
+/**
+
+**/
+EFI_STATUS
+EFIAPI
+MmcDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Initializes MMC Host pool
+ //
+ InitializeMmcHostPool ();
+
+ //
+ // Install driver model protocol(s).
+ //
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gMmcDriverBinding,
+ ImageHandle,
+ &gMmcComponentName,
+ &gMmcComponentName2
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ // Install driver diagnostics
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &ImageHandle,
+ &gEfiDriverDiagnostics2ProtocolGuid,&gMmcDriverDiagnostics2,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ // Use a timer to detect if a card has been plugged in or removed
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL | EVT_TIMER,
+ TPL_CALLBACK,
+ CheckCardsCallback,
+ NULL,
+ &gCheckCardsEvent);
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->SetTimer(
+ gCheckCardsEvent,
+ TimerPeriodic,
+ (UINT64)(10*1000*200)); // 200 ms
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h
new file mode 100644
index 000000000000..a18f4a82d903
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h
@@ -0,0 +1,533 @@
+/** @file
+ *
+ * Main Header file for the MMC DXE driver
+ *
+ * Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __MMC_H
+#define __MMC_H
+
+#include <Uefi.h>
+
+#include <Protocol/DiskIo.h>
+#include <Protocol/BlockIo.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/PiMmcHost.h>
+
+#include <Library/UefiLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#define MMC_TRACE(txt) DEBUG((DEBUG_BLKIO, "MMC: " txt "\n"))
+
+#define MMC_IOBLOCKS_READ 0
+#define MMC_IOBLOCKS_WRITE 1
+
+#define MMC_OCR_POWERUP 0x80000000
+
+#define MMC_OCR_ACCESS_MASK 0x3 /* bit[30-29] */
+#define MMC_OCR_ACCESS_BYTE 0x1 /* bit[29] */
+#define MMC_OCR_ACCESS_SECTOR 0x2 /* bit[30] */
+
+#define MMC_CSD_GET_CCC(Response) (Response[2] >> 20)
+#define MMC_CSD_GET_TRANSPEED(Response) (Response[3] & 0xFF)
+#define MMC_CSD_GET_READBLLEN(Response) ((Response[2] >> 16) & 0xF)
+#define MMC_CSD_GET_WRITEBLLEN(Response) ((Response[0] >> 22) & 0xF)
+#define MMC_CSD_GET_FILEFORMAT(Response) ((Response[0] >> 10) & 0x3)
+#define MMC_CSD_GET_FILEFORMATGRP(Response) ((Response[0] >> 15) & 0x1)
+#define MMC_CSD_GET_DEVICESIZE(csd) (((Response[1] >> 30) & 0x3) | ((Response[2] & 0x3FF) << 2))
+#define HC_MMC_CSD_GET_DEVICESIZE(Response) ((Response[1] >> 16) | ((Response[2] & 0x3F) << 16));
+#define MMC_CSD_GET_DEVICESIZEMULT(csd) ((Response[1] >> 15) & 0x7)
+
+#define MMC_R0_READY_FOR_DATA (1 << 8)
+
+#define MMC_R0_CURRENTSTATE(Response) ((Response[0] >> 9) & 0xF)
+
+#define MMC_R0_STATE_IDLE 0
+#define MMC_R0_STATE_READY 1
+#define MMC_R0_STATE_IDENT 2
+#define MMC_R0_STATE_STDBY 3
+#define MMC_R0_STATE_TRAN 4
+#define MMC_R0_STATE_DATA 5
+#define MMC_R0_STATE_RECV 6
+#define MMC_R0_STATE_PROG 7
+#define MMC_R0_STATE_DIS 8
+
+
+#define EMMC_CMD6_ARG_ACCESS(x) (((x) & 0x3) << 24)
+#define EMMC_CMD6_ARG_INDEX(x) (((x) & 0xFF) << 16)
+#define EMMC_CMD6_ARG_VALUE(x) (((x) & 0xFF) << 8)
+#define EMMC_CMD6_ARG_CMD_SET(x) (((x) & 0x7) << 0)
+
+#define SWITCH_CMD_DATA_LENGTH 64
+#define SD_HIGH_SPEED_SUPPORTED 0x200
+#define SD_DEFAULT_SPEED 25000000
+#define SD_HIGH_SPEED 50000000
+#define SWITCH_CMD_SUCCESS_MASK 0xf
+
+#define BUSWIDTH_4 4
+
+typedef enum {
+ UNKNOWN_CARD,
+ MMC_CARD, //MMC card
+ MMC_CARD_HIGH, //MMC Card with High capacity
+ EMMC_CARD, //eMMC 4.41 card
+ SD_CARD, //SD 1.1 card
+ SD_CARD_2, //SD 2.0 or above standard card
+ SD_CARD_2_HIGH //SD 2.0 or above high capacity card
+} CARD_TYPE;
+
+typedef struct {
+ UINT32 Reserved0: 7; // 0
+ UINT32 V170_V195: 1; // 1.70V - 1.95V
+ UINT32 V200_V260: 7; // 2.00V - 2.60V
+ UINT32 V270_V360: 9; // 2.70V - 3.60V
+ UINT32 RESERVED_1: 5; // Reserved
+ UINT32 AccessMode: 2; // 00b (byte mode), 10b (sector mode)
+ UINT32 PowerUp: 1; // This bit is set to LOW if the card has not finished the power up routine
+} OCR;
+
+typedef struct {
+ UINT8 SD_SPEC: 4; // SD Memory Card - Spec. Version [59:56]
+ UINT8 SCR_STRUCTURE: 4; // SCR Structure [63:60]
+ UINT8 SD_BUS_WIDTHS: 4; // DAT Bus widths supported [51:48]
+ UINT8 DATA_STAT_AFTER_ERASE: 1; // Data Status after erases [55]
+ UINT8 SD_SECURITY: 3; // CPRM Security Support [54:52]
+ UINT8 EX_SECURITY_1: 1; // Extended Security Support [43]
+ UINT8 SD_SPEC4: 1; // Spec. Version 4.00 or higher [42]
+ UINT8 RESERVED_1: 2; // Reserved [41:40]
+ UINT8 SD_SPEC3: 1; // Spec. Version 3.00 or higher [47]
+ UINT8 EX_SECURITY_2: 3; // Extended Security Support [46:44]
+ UINT8 CMD_SUPPORT: 4; // Command Support bits [35:32]
+ UINT8 RESERVED_2: 4; // Reserved [39:36]
+ UINT32 RESERVED_3; // Manufacturer Usage [31:0]
+} SCR;
+
+typedef struct {
+ UINT32 NOT_USED; // 1 [0:0]
+ UINT32 CRC; // CRC7 checksum [7:1]
+
+ UINT32 MDT; // Manufacturing date [19:8]
+ UINT32 RESERVED_1; // Reserved [23:20]
+ UINT32 PSN; // Product serial number [55:24]
+ UINT8 PRV; // Product revision [63:56]
+ UINT8 PNM[5]; // Product name [64:103]
+ UINT16 OID; // OEM/Application ID [119:104]
+ UINT8 MID; // Manufacturer ID [127:120]
+} CID;
+
+typedef struct {
+ UINT8 NOT_USED: 1; // Not used, always 1 [0:0]
+ UINT8 CRC: 7; // CRC [7:1]
+
+ UINT8 RESERVED_1: 2; // Reserved [9:8]
+ UINT8 FILE_FORMAT: 2; // File format [11:10]
+ UINT8 TMP_WRITE_PROTECT: 1; // Temporary write protection [12:12]
+ UINT8 PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
+ UINT8 COPY: 1; // Copy flag (OTP) [14:14]
+ UINT8 FILE_FORMAT_GRP: 1; // File format group [15:15]
+
+ UINT16 RESERVED_2: 5; // Reserved [20:16]
+ UINT16 WRITE_BL_PARTIAL: 1; // Partial blocks for write allowed [21:21]
+ UINT16 WRITE_BL_LEN: 4; // Max. write data block length [25:22]
+ UINT16 R2W_FACTOR: 3; // Write speed factor [28:26]
+ UINT16 RESERVED_3: 2; // Reserved [30:29]
+ UINT16 WP_GRP_ENABLE: 1; // Write protect group enable [31:31]
+
+ UINT32 WP_GRP_SIZE: 7; // Write protect group size [38:32]
+ UINT32 SECTOR_SIZE: 7; // Erase sector size [45:39]
+ UINT32 ERASE_BLK_EN: 1; // Erase single block enable [46:46]
+ UINT32 C_SIZE_MULT: 3; // Device size multiplier [49:47]
+ UINT32 VDD_W_CURR_MAX: 3; // Max. write current @ VDD max [52:50]
+ UINT32 VDD_W_CURR_MIN: 3; // Max. write current @ VDD min [55:53]
+ UINT32 VDD_R_CURR_MAX: 3; // Max. read current @ VDD max [58:56]
+ UINT32 VDD_R_CURR_MIN: 3; // Max. read current @ VDD min [61:59]
+ UINT32 C_SIZELow2: 2; // Device size [63:62]
+
+ UINT32 C_SIZEHigh10: 10;// Device size [73:64]
+ UINT32 RESERVED_4: 2; // Reserved [75:74]
+ UINT32 DSR_IMP: 1; // DSR implemented [76:76]
+ UINT32 READ_BLK_MISALIGN: 1; // Read block misalignment [77:77]
+ UINT32 WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
+ UINT32 READ_BL_PARTIAL: 1; // Partial blocks for read allowed [79:79]
+ UINT32 READ_BL_LEN: 4; // Max. read data block length [83:80]
+ UINT32 CCC: 12;// Card command classes [95:84]
+
+ UINT8 TRAN_SPEED ; // Max. bus clock frequency [103:96]
+ UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
+ UINT8 TAAC ; // Data read access-time 1 [119:112]
+
+ UINT8 RESERVED_5: 2; // Reserved [121:120]
+ UINT8 SPEC_VERS: 4; // System specification version [125:122]
+ UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]
+} CSD;
+
+typedef struct {
+ UINT8 RESERVED_1[16]; // Reserved [15:0]
+ UINT8 SECURE_REMOVAL_TYPE; // Secure Removal Type [16:16]
+ UINT8 PRODUCT_STATE_AWARENESS_ENABLEMENT; // Product state awareness enablement [17:17]
+ UINT8 MAX_PRE_LOADING_DATA_SIZE[4]; // MAX pre loading data size [21:18]
+ UINT8 PRE_LOADING_DATA_SIZE[4]; // Pre loading data size [25:22]
+ UINT8 FFU_STATUS; // FFU Status [26:26]
+ UINT8 RESERVED_2[2]; // Reserved [28:27]
+ UINT8 MODE_OPERATION_CODES; // Mode operation codes [29:29]
+ UINT8 MODE_CONFIG; // Mode config [30:30]
+ UINT8 RESERVED_3; // Reserved [31:31]
+ UINT8 FLUSH_CACHE; // Flushing of the cache [32:32]
+ UINT8 CACHE_CTRL; // Control to turn the cache ON/OFF [33:33]
+ UINT8 POWER_OFF_NOTIFICATION; // Power Off Notification [34:34]
+ UINT8 PACKED_FAILURE_INDEX; // Packed command failure index [35:35]
+ UINT8 PACKED_COMMAND_STATUS; // Packed command status [36:36]
+ UINT8 CONTEXT_CONF[15]; // Context configuration [51:37]
+ UINT8 EXT_PARTITIONS_ATTRIBUTE[2]; // Extended partitions attribute [53:52]
+ UINT8 EXCEPTION_EVENTS_STATUS[2]; // Exception events status [55:54]
+ UINT8 EXCEPTION_EVENTS_CTRL[2]; // Exception events control [57:56]
+ UINT8 DYNCAP_NEEDED; // Number of addressed group to be released [58:58]
+ UINT8 CLASS_6_CTRL; // Class 6 commands control [59:59]
+ UINT8 INI_TIMEOUT_EMU; // 1st initialization after disabling sector size emulation [60:60]
+ UINT8 DATA_SECTOR_SIZE; // Sector size [61:61]
+ UINT8 USE_NATIVE_SECTOR; // Sector size emulation [62:62]
+ UINT8 NATIVE_SECTOR_SIZE; // Native sector size [63:63]
+ UINT8 VENDOR_SPECIFIC_FIELD[64]; // Vendor specific fields [127:64]
+ UINT8 RESERVED_4[2]; // Reserved [129:128]
+ UINT8 PROGRAM_CID_CSD_DDR_SUPPORT; // Program CID/CSD in DDR mode support [130:130]
+ UINT8 PERIODIC_WAKEUP; // Periodic wake-up [131:131]
+ UINT8 TCASE_SUPPORT; // Package case temperature is controlled [132:132]
+ UINT8 PRODUCTION_STATE_AWARENESS; // Production state awareness [133:133]
+ UINT8 SECTOR_BAD_BLK_MGMNT; // Bad block management mode [134:134]
+ UINT8 RESERVED_5; // Reserved [135:135]
+ UINT8 ENH_START_ADDR[4]; // Enhanced user data start address [139:136]
+ UINT8 ENH_SIZE_MULT[3]; // Enhanced user data area size [142:140]
+ UINT8 GP_SIZE_MULT[12]; // General purpose partition size [154:143]
+ UINT8 PARTITION_SETTING_COMPLETED; // Partitioning setting [155:155]
+ UINT8 PARTITIONS_ATTRIBUTE; // Partitions attribute [156:156]
+ UINT8 MAX_ENH_SIZE_MULT[3]; // Max enhanced area size [159:157]
+ UINT8 PARTITIONING_SUPPORT; // Partitioning [160:160]
+ UINT8 HPI_MGMT; // HPI management [161:161]
+ UINT8 RST_N_FUNCTION; // H/W reset function [162:162]
+ UINT8 BKOPS_EN; // Enable background operations handshake [163:163]
+ UINT8 BKOPS_START; // Manually start background operations [164:164]
+ UINT8 SANITIZE_START; // Start sanitize operation [165:165]
+ UINT8 WR_REL_PARAM; // Write reliability parameter register [166:166]
+ UINT8 WR_REL_SET; // Write reliability setting register [167:167]
+ UINT8 RPMB_SIZE_MULT; // RPMB size [168:168]
+ UINT8 FW_CONFIG; // FW configuration [169:169]
+ UINT8 RESERVED_6; // Reserved [170:170]
+ UINT8 USER_WP; // User area write protection register [171:171]
+ UINT8 RESERVED_7; // Reserved [172:172]
+ UINT8 BOOT_WP; // Boot area write protection register [173:173]
+ UINT8 BOOT_WP_STATUS; // Boot write protection register [174:174]
+ UINT8 ERASE_GROUP_DEF; // High-density erase group definition [175:175]
+ UINT8 RESERVED_8; // Reserved [176:176]
+ UINT8 BOOT_BUS_CONDITIONS; // Boot bus conditions [177:177]
+ UINT8 BOOT_CONFIG_PROT; // Boot config protection [178:178]
+ UINT8 PARTITION_CONFIG; // Partition config [179:179]
+ UINT8 RESERVED_9; // Reserved [180:180]
+ UINT8 ERASED_MEM_CONT; // Erased memory content [181:181]
+ UINT8 RESERVED_10; // Reserved [182:182]
+ UINT8 BUS_WIDTH; // Bus width mode [183:183]
+ UINT8 RESERVED_11; // Reserved [184:184]
+ UINT8 HS_TIMING; // High-speed interface timing [185:185]
+ UINT8 RESERVED_12; // Reserved [186:186]
+ UINT8 POWER_CLASS; // Power class [187:187]
+ UINT8 RESERVED_13; // Reserved [188:188]
+ UINT8 CMD_SET_REV; // Command set revision [189:189]
+ UINT8 RESERVED_14; // Reserved [190:190]
+ UINT8 CMD_SET; // Command set [191:191]
+ UINT8 EXT_CSD_REV; // Extended CSD revision [192:192]
+ UINT8 RESERVED_15; // Reserved [193:193]
+ UINT8 CSD_STRUCTURE; // CSD Structure [194:194]
+ UINT8 RESERVED_16; // Reserved [195:195]
+ UINT8 DEVICE_TYPE; // Device type [196:196]
+ UINT8 DRIVER_STRENGTH; // I/O Driver strength [197:197]
+ UINT8 OUT_OF_INTERRUPT_TIME; // Out-of-interrupt busy timing [198:198]
+ UINT8 PARTITION_SWITCH_TIME; // Partition switching timing [199:199]
+ UINT8 PWR_CL_52_195; // Power class for 52MHz at 1.95V 1 R [200:200]
+ UINT8 PWR_CL_26_195; // Power class for 26MHz at 1.95V 1 R [201:201]
+ UINT8 PWR_CL_52_360; // Power class for 52MHz at 3.6V 1 R [202:202]
+ UINT8 PWR_CL_26_360; // Power class for 26MHz at 3.6V 1 R [203:203]
+ UINT8 RESERVED_17; // Reserved [204:204]
+ UINT8 MIN_PERF_R_4_26; // Minimum read performance for 4bit at 26MHz [205:205]
+ UINT8 MIN_PERF_W_4_26; // Minimum write performance for 4bit at 26MHz [206:206]
+ UINT8 MIN_PERF_R_8_26_4_52; // Minimum read performance for 8bit at 26MHz, for 4bit at 52MHz [207:207]
+ UINT8 MIN_PERF_W_8_26_4_52; // Minimum write performance for 8bit at 26MHz, for 4bit at 52MHz [208:208]
+ UINT8 MIN_PERF_R_8_52; // Minimum read performance for 8bit at 52MHz [209:209]
+ UINT8 MIN_PERF_W_8_52; // Minimum write performance for 8bit at 52MHz [210:210]
+ UINT8 RESERVED_18; // Reserved [211:211]
+ UINT32 SECTOR_COUNT; // Sector count [215:212]
+ UINT8 SLEEP_NOTIFICATION_TIME; // Sleep notification timout [216:216]
+ UINT8 S_A_TIMEOUT; // Sleep/awake timeout [217:217]
+ UINT8 PRODUCTION_STATE_AWARENESS_TIMEOUT; // Production state awareness timeout [218:218]
+ UINT8 S_C_VCCQ; // Sleep current (VCCQ) [219:219]
+ UINT8 S_C_VCC; // Sleep current (VCC) [220:220]
+ UINT8 HC_WP_GRP_SIZE; // High-capacity write protect group size [221:221]
+ UINT8 REL_WR_SECTOR_C; // Reliable write sector count [222:222]
+ UINT8 ERASE_TIMEOUT_MULT; // High-capacity erase timeout [223:223]
+ UINT8 HC_ERASE_GRP_SIZE; // High-capacity erase unit size [224:224]
+ UINT8 ACC_SIZE; // Access size [225:225]
+ UINT8 BOOT_SIZE_MULTI; // Boot partition size [226:226]
+ UINT8 RESERVED_19; // Reserved [227:227]
+ UINT8 BOOT_INFO; // Boot information [228:228]
+ UINT8 SECURE_TRIM_MULT; // Secure TRIM Multiplier [229:229]
+ UINT8 SECURE_ERASE_MULT; // Secure Erase Multiplier [230:230]
+ UINT8 SECURE_FEATURE_SUPPORT; // Secure Feature Support [231:231]
+ UINT8 TRIM_MULT; // TRIM Multiplier [232:232]
+ UINT8 RESERVED_20; // Reserved [233:233]
+ UINT8 MIN_PREF_DDR_R_8_52; // Minimum read performance for 8bit at 52MHz in DDR mode [234:234]
+ UINT8 MIN_PREF_DDR_W_8_52; // Minimum write performance for 8bit at 52MHz in DDR mode [235:235]
+ UINT8 PWR_CL_200_130; // Power class for 200MHz at VCCQ=1.3V, VCC=3.6V [236:236]
+ UINT8 PWR_CL_200_195; // Power class for 200MHz at VCCQ=1.95V, VCC=3.6V [237:237]
+ UINT8 PWR_CL_DDR_52_195; // Power class for 52MHz, DDR at 1.95V [238:238]
+ UINT8 PWR_CL_DDR_52_360; // Power class for 52Mhz, DDR at 3.6V [239:239]
+ UINT8 RESERVED_21; // Reserved [240:240]
+ UINT8 INI_TIMEOUT_AP; // 1st initialization time after partitioning [241:241]
+ UINT8 CORRECTLY_PRG_SECTORS_NUM[4]; // Number of correctly programmed sectors [245:242]
+ UINT8 BKOPS_STATUS; // Background operations status [246:246]
+ UINT8 POWER_OFF_LONG_TIME; // Power off notification (long) timeout [247:247]
+ UINT8 GENERIC_CMD6_TIME; // Generic CMD6 timeout [248:248]
+ UINT8 CACHE_SIZE[4]; // Cache size [252:249]
+ UINT8 PWR_CL_DDR_200_360; // Power class for 200MHz, DDR at VCC=3.6V [253:253]
+ UINT8 FIRMWARE_VERSION[8]; // Firmware version [261:254]
+ UINT8 DEVICE_VERSION[2]; // Device version [263:262]
+ UINT8 OPTIMAL_TRIM_UNIT_SIZE; // Optimal trim unit size [264:264]
+ UINT8 OPTIMAL_WRITE_SIZE; // Optimal write size [265:265]
+ UINT8 OPTIMAL_READ_SIZE; // Optimal read size [266:266]
+ UINT8 PRE_EOL_INFO; // Pre EOL information [267:267]
+ UINT8 DEVICE_LIFE_TIME_EST_TYP_A; // Device life time estimation type A [268:268]
+ UINT8 DEVICE_LIFE_TIME_EST_TYP_B; // Device life time estimation type B [269:269]
+ UINT8 VENDOR_PROPRIETARY_HEALTH_REPORT[32]; // Vendor proprietary health report [301:270]
+ UINT8 NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED[4]; // Number of FW sectors correctly programmed [305:302]
+ UINT8 RESERVED_22[181]; // Reserved [486:306]
+ UINT8 FFU_ARG[4]; // FFU argument [490:487]
+ UINT8 OPERATION_CODE_TIMEOUT; // Operation codes timeout [491:491]
+ UINT8 FFU_FEATURES; // FFU features [492:492]
+ UINT8 SUPPORTED_MODES; // Supported modes [493:493]
+ UINT8 EXT_SUPPORT; // Extended partitions attribute support [494:494]
+ UINT8 LARGE_UNIT_SIZE_M1; // Large unit size [495:495]
+ UINT8 CONTEXT_CAPABILITIES; // Context management capabilities [496:496]
+ UINT8 TAG_RES_SIZE; // Tag resource size [497:497]
+ UINT8 TAG_UNIT_SIZE; // Tag unit size [498:498]
+ UINT8 DATA_TAG_SUPPORT; // Data tag support [499:499]
+ UINT8 MAX_PACKED_WRITES; // Max packed write commands [500:500]
+ UINT8 MAX_PACKED_READS; // Max packed read commands [501:501]
+ UINT8 BKOPS_SUPPORT; // Background operations support [502:502]
+ UINT8 HPI_FEATURES; // HPI features [503:503]
+ UINT8 S_CMD_SET; // Supported command sets [504:504]
+ UINT8 EXT_SECURITY_ERR; // Extended security commands error [505:505]
+ UINT8 RESERVED_23[6]; // Reserved [511:506]
+} ECSD;
+
+typedef struct {
+ UINT16 RCA;
+ CARD_TYPE CardType;
+ OCR OCRData;
+ CID CIDData;
+ CSD CSDData;
+ ECSD *ECSDData; // MMC V4 extended card specific
+} CARD_INFO;
+
+typedef struct _MMC_HOST_INSTANCE {
+ UINTN Signature;
+ LIST_ENTRY Link;
+ EFI_HANDLE MmcHandle;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ MMC_STATE State;
+ EFI_BLOCK_IO_PROTOCOL BlockIo;
+ CARD_INFO CardInfo;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+
+ BOOLEAN Initialized;
+} MMC_HOST_INSTANCE;
+
+#define MMC_HOST_INSTANCE_SIGNATURE SIGNATURE_32('m', 'm', 'c', 'h')
+#define MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS(a) CR (a, MMC_HOST_INSTANCE, BlockIo, MMC_HOST_INSTANCE_SIGNATURE)
+#define MMC_HOST_INSTANCE_FROM_LINK(a) CR (a, MMC_HOST_INSTANCE, Link, MMC_HOST_INSTANCE_SIGNATURE)
+
+
+EFI_STATUS
+EFIAPI
+MmcGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ );
+
+EFI_STATUS
+EFIAPI
+MmcGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+extern EFI_COMPONENT_NAME_PROTOCOL gMmcComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gMmcComponentName2;
+
+extern EFI_DRIVER_DIAGNOSTICS2_PROTOCOL gMmcDriverDiagnostics2;
+
+extern LIST_ENTRY mMmcHostPool;
+
+/**
+ Reset the block device.
+
+ This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
+ It resets the block device hardware.
+ ExtendedVerification is ignored in this implementation.
+
+ @param This Indicates a pointer to the calling context.
+ @param ExtendedVerification Indicates that the driver may perform a more exhaustive
+ verification operation of the device during reset.
+
+ @retval EFI_SUCCESS The block device was reset.
+ @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be reset.
+
+**/
+EFI_STATUS
+EFIAPI
+MmcReset (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ );
+
+/**
+ Reads the requested number of blocks from the device.
+
+ This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
+ It reads the requested number of blocks from the device.
+ All the blocks are read, or an error is returned.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId The media ID that the read request is for.
+ @param Lba The starting logical block address to read from on the device.
+ @param BufferSize The size of the Buffer in bytes.
+ This must be a multiple of the intrinsic block size of the device.
+ @param Buffer A pointer to the destination buffer for the data. The caller is
+ responsible for either having implicit or explicit ownership of the buffer.
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the read operation.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device.
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
+
+**/
+EFI_STATUS
+EFIAPI
+MmcReadBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ );
+
+/**
+ Writes a specified number of blocks to the device.
+
+ This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
+ It writes a specified number of blocks to the device.
+ All blocks are written, or an error is returned.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId The media ID that the write request is for.
+ @param Lba The starting logical block address to be written.
+ @param BufferSize The size of the Buffer in bytes.
+ This must be a multiple of the intrinsic block size of the device.
+ @param Buffer Pointer to the source buffer for the data.
+
+ @retval EFI_SUCCESS The data were written correctly to the device.
+ @retval EFI_WRITE_PROTECTED The device cannot be written to.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the write operation.
+ @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic
+ block size of the device.
+ @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
+
+**/
+EFI_STATUS
+EFIAPI
+MmcWriteBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ IN VOID *Buffer
+ );
+
+/**
+ Flushes all modified data to a physical block device.
+
+ @param This Indicates a pointer to the calling context.
+
+ @retval EFI_SUCCESS All outstanding data were written correctly to the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to write data.
+ @retval EFI_NO_MEDIA There is no media in the device.
+
+**/
+EFI_STATUS
+EFIAPI
+MmcFlushBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This
+ );
+
+EFI_STATUS
+MmcNotifyState (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ IN MMC_STATE State
+ );
+
+EFI_STATUS
+InitializeMmcDevice (
+ IN MMC_HOST_INSTANCE *MmcHost
+ );
+
+VOID
+EFIAPI
+CheckCardsCallback (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+VOID
+PrintCSD (
+ IN UINT32* Csd
+ );
+
+VOID
+PrintRCA (
+ IN UINT32 Rca
+ );
+
+VOID
+PrintOCR (
+ IN UINT32 Ocr
+ );
+
+VOID
+PrintResponseR1 (
+ IN UINT32 Response
+ );
+
+VOID
+PrintCID (
+ IN UINT32* Cid
+ );
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c
new file mode 100644
index 000000000000..54cdbde95292
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c
@@ -0,0 +1,473 @@
+/** @file
+ *
+ * Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Library/BaseMemoryLib.h>
+
+#include "Mmc.h"
+
+#define MMCI0_BLOCKLEN 512
+#define MMCI0_TIMEOUT 1000
+
+STATIC
+EFI_STATUS
+R1TranAndReady(UINT32 *Response)
+{
+ if ((*Response & MMC_R0_READY_FOR_DATA) != 0 &&
+ MMC_R0_CURRENTSTATE(Response) == MMC_R0_STATE_TRAN) {
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NOT_READY;
+}
+
+STATIC
+EFI_STATUS
+ValidateWrittenBlockCount(
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ IN UINTN Count,
+ OUT UINTN *TransferredBlocks
+ )
+{
+ UINT32 R1;
+ UINT8 Data[4];
+ EFI_STATUS Status;
+ UINT32 BlocksWritten;
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ if (MmcHostInstance->CardInfo.CardType == MMC_CARD ||
+ MmcHostInstance->CardInfo.CardType == MMC_CARD_HIGH ||
+ MmcHostInstance->CardInfo.CardType == EMMC_CARD) {
+ /*
+ * Not on MMC.
+ */
+ return EFI_SUCCESS;
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD55,
+ MmcHostInstance->CardInfo.RCA << 16);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_ACMD22, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+
+ MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, &R1);
+ Status = R1TranAndReady(&R1);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Read Data
+ Status = MmcHost->ReadBlockData (MmcHost, 0, sizeof(Data),
+ (VOID *) Data);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+
+ /*
+ * Big Endian.
+ */
+ BlocksWritten = ((UINT32) Data[0] << 24) |
+ ((UINT32) Data[1] << 16) |
+ ((UINT32) Data[2] << 8) |
+ ((UINT32) Data[3] << 0);
+ if (BlocksWritten != Count) {
+ DEBUG ((DEBUG_ERROR, "%a(%u): expected %u != gotten %u\n",
+ __FUNCTION__, __LINE__, Count, BlocksWritten));
+ if (BlocksWritten == 0) {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ *TransferredBlocks = BlocksWritten;
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+WaitUntilTran(
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ INTN Timeout;
+ UINT32 Response[1];
+ EFI_STATUS Status = EFI_SUCCESS;
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ Timeout = MMCI0_TIMEOUT;
+ while(Timeout--) {
+ /*
+ * We expect CMD13 to timeout while card is programming,
+ * because the card holds DAT0 low (busy).
+ */
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD13,
+ MmcHostInstance->CardInfo.RCA << 16);
+ if (EFI_ERROR(Status) && Status != EFI_TIMEOUT) {
+ DEBUG ((DEBUG_ERROR, "%a(%u) CMD13 failed: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ break;
+ }
+
+ if (Status == EFI_SUCCESS) {
+ MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
+ Status = R1TranAndReady(Response);
+ if (!EFI_ERROR(Status)) {
+ break;
+ }
+ }
+
+ gBS->Stall(1000);
+ }
+
+ if (0 == Timeout) {
+ DEBUG ((DEBUG_ERROR, "%a(%u) card is busy\n", __FUNCTION__, __LINE__));
+ return EFI_NOT_READY;
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+MmcNotifyState (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ IN MMC_STATE State
+ )
+{
+ MmcHostInstance->State = State;
+ return MmcHostInstance->MmcHost->NotifyState (MmcHostInstance->MmcHost, State);
+}
+
+EFI_STATUS
+EFIAPI
+MmcReset (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ )
+{
+ MMC_HOST_INSTANCE *MmcHostInstance;
+
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
+
+ if (MmcHostInstance->MmcHost == NULL) {
+ // Nothing to do
+ return EFI_SUCCESS;
+ }
+
+ // If a card is not present then clear all media settings
+ if (!MmcHostInstance->MmcHost->IsCardPresent (MmcHostInstance->MmcHost)) {
+ MmcHostInstance->BlockIo.Media->MediaPresent = FALSE;
+ MmcHostInstance->BlockIo.Media->LastBlock = 0;
+ MmcHostInstance->BlockIo.Media->BlockSize = 512; // Should be zero but there is a bug in DiskIo
+ MmcHostInstance->BlockIo.Media->ReadOnly = FALSE;
+
+ // Indicate that the driver requires initialization
+ MmcHostInstance->State = MmcHwInitializationState;
+
+ return EFI_SUCCESS;
+ }
+
+ // Implement me. Either send a CMD0 (could not work for some MMC host) or just turn off/turn
+ // on power and restart Identification mode
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+MmcDetectCard (
+ EFI_MMC_HOST_PROTOCOL *MmcHost
+ )
+{
+ if (!MmcHost->IsCardPresent (MmcHost)) {
+ return EFI_NO_MEDIA;
+ } else {
+ return EFI_SUCCESS;
+ }
+}
+
+EFI_STATUS
+MmcStopTransmission (
+ EFI_MMC_HOST_PROTOCOL *MmcHost
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Response[4];
+ // Command 12 - Stop transmission (ends read or write)
+ // Normally only needed for streaming transfers or after error.
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD12, 0);
+ if (!EFI_ERROR (Status)) {
+ MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1b, Response);
+ }
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+MmcTransferBlock (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINTN Cmd,
+ IN UINTN Transfer,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer,
+ OUT UINTN *TransferredSize
+ )
+{
+ EFI_STATUS Status;
+ MMC_HOST_INSTANCE *MmcHostInstance;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+ UINTN CmdArg;
+
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
+ MmcHost = MmcHostInstance->MmcHost;
+
+ //Set command argument based on the card access mode (Byte mode or Block mode)
+ if ((MmcHostInstance->CardInfo.OCRData.AccessMode & MMC_OCR_ACCESS_MASK) ==
+ MMC_OCR_ACCESS_SECTOR) {
+ CmdArg = Lba;
+ } else {
+ CmdArg = Lba * This->Media->BlockSize;
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(MMC_CMD%d): Error %r\n", __func__,
+ MMC_INDX(Cmd), Status));
+ return Status;
+ }
+
+ if (Transfer == MMC_IOBLOCKS_READ) {
+ Status = MmcHost->ReadBlockData (MmcHost, Lba, BufferSize, Buffer);
+ } else {
+ Status = MmcHost->WriteBlockData (MmcHost, Lba, BufferSize, Buffer);
+ if (!EFI_ERROR (Status)) {
+ Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a() : Error MmcProgrammingState\n", __func__));
+ return Status;
+ }
+ }
+ }
+
+ if (EFI_ERROR (Status) ||
+ BufferSize > This->Media->BlockSize) {
+ /*
+ * CMD12 needs to be set for multiblock (to transition from
+ * RECV to PROG) or for errors.
+ */
+ EFI_STATUS Status2 = MmcStopTransmission (MmcHost);
+ if (EFI_ERROR (Status2)) {
+ DEBUG ((DEBUG_ERROR, "MmcIoBlocks() : CMD12 error on Status %r: %r\n",
+ Status, Status2));
+ return Status2;
+ }
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_BLKIO, "%a(): Error %a Block Data and Status = %r\n",
+ __func__, Transfer == MMC_IOBLOCKS_READ ? "Read" : "Write",
+ Status));
+ return Status;
+ }
+
+ ASSERT (Cmd == MMC_CMD25 || Cmd == MMC_CMD18);
+ }
+
+ //
+ // For reads, should be already in TRAN. For writes, wait
+ // until programming finishes.
+ //
+ Status = WaitUntilTran(MmcHostInstance);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "WaitUntilTran after write failed\n"));
+ return Status;
+ }
+
+ Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
+ return Status;
+ }
+
+ if (Transfer != MMC_IOBLOCKS_READ) {
+ UINTN BlocksWritten = 0;
+
+ Status = ValidateWrittenBlockCount (MmcHostInstance,
+ BufferSize /
+ This->Media->BlockSize,
+ &BlocksWritten);
+ *TransferredSize = BlocksWritten *
+ This->Media->BlockSize;
+ } else {
+ *TransferredSize = BufferSize;
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+MmcIoBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINTN Transfer,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN Cmd;
+ MMC_HOST_INSTANCE *MmcHostInstance;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+ UINTN BytesRemainingToBeTransfered;
+ UINTN BlockCount;
+ UINTN ConsumeSize;
+
+ BlockCount = 1;
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
+ ASSERT (MmcHostInstance != NULL);
+ MmcHost = MmcHostInstance->MmcHost;
+ ASSERT (MmcHost);
+
+ if (This->Media->MediaId != MediaId) {
+ return EFI_MEDIA_CHANGED;
+ }
+
+ if ((MmcHost == NULL) || (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Check if a Card is Present
+ if (!MmcHostInstance->BlockIo.Media->MediaPresent) {
+ return EFI_NO_MEDIA;
+ }
+
+ if (PcdGet32(PcdMmcDisableMulti) == 0 &&
+ MMC_HOST_HAS_ISMULTIBLOCK(MmcHost) &&
+ MmcHost->IsMultiBlock(MmcHost)) {
+ BlockCount = (BufferSize + This->Media->BlockSize - 1) / This->Media->BlockSize;
+ }
+
+ // All blocks must be within the device
+ if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Transfer == MMC_IOBLOCKS_WRITE) && (This->Media->ReadOnly == TRUE)) {
+ return EFI_WRITE_PROTECTED;
+ }
+
+ // Reading 0 Byte is valid
+ if (BufferSize == 0) {
+ return EFI_SUCCESS;
+ }
+
+ // The buffer size must be an exact multiple of the block size
+ if ((BufferSize % This->Media->BlockSize) != 0) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // Check the alignment
+ if ((This->Media->IoAlign > 2) && (((UINTN)Buffer & (This->Media->IoAlign - 1)) != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ BytesRemainingToBeTransfered = BufferSize;
+ while (BytesRemainingToBeTransfered > 0) {
+ Status = WaitUntilTran(MmcHostInstance);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "WaitUntilTran before IO failed"));
+ return Status;
+ }
+
+ if (Transfer == MMC_IOBLOCKS_READ) {
+ if (BlockCount == 1) {
+ // Read a single block
+ Cmd = MMC_CMD17;
+ } else {
+ // Read multiple blocks
+ Cmd = MMC_CMD18;
+ }
+ } else {
+ if (BlockCount == 1) {
+ // Write a single block
+ Cmd = MMC_CMD24;
+ } else {
+ // Write multiple blocks
+ Cmd = MMC_CMD25;
+ }
+ }
+
+ ConsumeSize = BlockCount * This->Media->BlockSize;
+ if (BytesRemainingToBeTransfered < ConsumeSize) {
+ ConsumeSize = BytesRemainingToBeTransfered;
+ }
+
+ Status = MmcTransferBlock (This, Cmd, Transfer, MediaId, Lba, ConsumeSize, Buffer, &ConsumeSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(): Failed to transfer block and Status:%r\n", __func__, Status));
+ return Status;
+ }
+
+ BytesRemainingToBeTransfered -= ConsumeSize;
+ if (BytesRemainingToBeTransfered > 0) {
+ Lba += BlockCount;
+ Buffer = (UINT8 *)Buffer + ConsumeSize;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+MmcReadBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ return MmcIoBlocks (This, MMC_IOBLOCKS_READ, MediaId, Lba, BufferSize, Buffer);
+}
+
+EFI_STATUS
+EFIAPI
+MmcWriteBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ IN VOID *Buffer
+ )
+{
+ return MmcIoBlocks (This, MMC_IOBLOCKS_WRITE, MediaId, Lba, BufferSize, Buffer);
+}
+
+EFI_STATUS
+EFIAPI
+MmcFlushBlocks (
+ IN EFI_BLOCK_IO_PROTOCOL *This
+ )
+{
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDebug.c b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDebug.c
new file mode 100644
index 000000000000..ea53700caaf8
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDebug.c
@@ -0,0 +1,169 @@
+/** @file
+ *
+ * Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "Mmc.h"
+
+#if !defined(MDEPKG_NDEBUG)
+CONST CHAR8* mStrUnit[] = { "100kbit/s", "1Mbit/s", "10Mbit/s", "100MBit/s",
+ "Unknown", "Unknown", "Unknown", "Unknown" };
+CONST CHAR8* mStrValue[] = { "1.0", "1.2", "1.3", "1.5", "2.0", "2.5",
+ "3.0", "3.5", "4.0", "4.5", "5.0", "5.5",
+ "6.0", "7.0", "8.0" };
+#endif
+
+VOID
+PrintCID (
+ IN UINT32* Cid
+ )
+{
+ DEBUG ((DEBUG_ERROR, "- PrintCID\n"));
+ DEBUG ((DEBUG_ERROR, "\t- Manufacturing date: %d/%d\n", (Cid[0] >> 8) & 0xF, (Cid[0] >> 12) & 0xFF));
+ DEBUG ((DEBUG_ERROR, "\t- Product serial number: 0x%X%X\n", Cid[1] & 0xFFFFFF, (Cid[0] >> 24) & 0xFF));
+ DEBUG ((DEBUG_ERROR, "\t- Product revision: %d\n", Cid[1] >> 24));
+ //DEBUG ((DEBUG_ERROR, "\t- Product name: %s\n", (char*)(Cid + 2)));
+ DEBUG ((DEBUG_ERROR, "\t- OEM ID: %c%c\n", (Cid[3] >> 8) & 0xFF, (Cid[3] >> 16) & 0xFF));
+}
+
+
+VOID
+PrintCSD (
+ IN UINT32* Csd
+ )
+{
+ UINTN Value;
+
+ if (((Csd[2] >> 30) & 0x3) == 0) {
+ DEBUG ((DEBUG_ERROR, "- PrintCSD Version 1.01-1.10/Version 2.00/Standard Capacity\n"));
+ } else if (((Csd[2] >> 30) & 0x3) == 1) {
+ DEBUG ((DEBUG_ERROR, "- PrintCSD Version 2.00/High Capacity\n"));
+ } else {
+ DEBUG ((DEBUG_ERROR, "- PrintCSD Version Higher than v3.3\n"));
+ }
+
+ DEBUG ((DEBUG_ERROR, "\t- Supported card command class: 0x%X\n", MMC_CSD_GET_CCC (Csd)));
+ DEBUG ((DEBUG_ERROR, "\t- Max Speed: %a * %a\n",mStrValue[(MMC_CSD_GET_TRANSPEED (Csd) >> 3) & 0xF],mStrUnit[MMC_CSD_GET_TRANSPEED (Csd) & 7]));
+ DEBUG ((DEBUG_ERROR, "\t- Maximum Read Data Block: %d\n",2 << (MMC_CSD_GET_READBLLEN (Csd)-1)));
+ DEBUG ((DEBUG_ERROR, "\t- Maximum Write Data Block: %d\n",2 << (MMC_CSD_GET_WRITEBLLEN (Csd)-1)));
+
+ if (!MMC_CSD_GET_FILEFORMATGRP (Csd)) {
+ Value = MMC_CSD_GET_FILEFORMAT (Csd);
+ if (Value == 0) {
+ DEBUG ((DEBUG_ERROR, "\t- Format (0): Hard disk-like file system with partition table\n"));
+ } else if (Value == 1) {
+ DEBUG ((DEBUG_ERROR, "\t- Format (1): DOS FAT (floppy-like) with boot sector only (no partition table)\n"));
+ } else if (Value == 2) {
+ DEBUG ((DEBUG_ERROR, "\t- Format (2): Universal File Format\n"));
+ } else {
+ DEBUG ((DEBUG_ERROR, "\t- Format (3): Others/Unknown\n"));
+ }
+ } else {
+ DEBUG ((DEBUG_ERROR, "\t- Format: Reserved\n"));
+ }
+}
+
+VOID
+PrintRCA (
+ IN UINT32 Rca
+ )
+{
+ DEBUG ((DEBUG_ERROR, "- PrintRCA: 0x%X\n", Rca));
+ DEBUG ((DEBUG_ERROR, "\t- Status: 0x%X\n", Rca & 0xFFFF));
+ DEBUG ((DEBUG_ERROR, "\t- RCA: 0x%X\n", (Rca >> 16) & 0xFFFF));
+}
+
+VOID
+PrintOCR (
+ IN UINT32 Ocr
+ )
+{
+ UINTN MinV;
+ UINTN MaxV;
+ UINTN Volts;
+ UINTN Loop;
+
+ MinV = 36; // 3.6
+ MaxV = 20; // 2.0
+ Volts = 20; // 2.0
+
+ // The MMC register bits [23:8] indicate the working range of the card
+ for (Loop = 8; Loop < 24; Loop++) {
+ if (Ocr & (1 << Loop)) {
+ if (MinV > Volts) {
+ MinV = Volts;
+ }
+ if (MaxV < Volts) {
+ MaxV = Volts + 1;
+ }
+ }
+ Volts++;
+ }
+
+ DEBUG ((DEBUG_ERROR, "- PrintOCR Ocr (0x%X)\n",Ocr));
+ DEBUG ((DEBUG_ERROR, "\t- Card operating voltage: %d.%d to %d.%d\n", MinV/10, MinV % 10, MaxV/10, MaxV % 10));
+ if (((Ocr >> 29) & 3) == 0) {
+ DEBUG ((DEBUG_ERROR, "\t- AccessMode: Byte Mode\n"));
+ } else {
+ DEBUG ((DEBUG_ERROR, "\t- AccessMode: Block Mode (0x%X)\n", ((Ocr >> 29) & 3)));
+ }
+
+ if (Ocr & MMC_OCR_POWERUP) {
+ DEBUG ((DEBUG_ERROR, "\t- PowerUp\n"));
+ } else {
+ DEBUG ((DEBUG_ERROR, "\t- Voltage Not Supported\n"));
+ }
+}
+
+VOID
+PrintResponseR1 (
+ IN UINT32 Response
+ )
+{
+ DEBUG ((DEBUG_INFO, "Response: 0x%X\n", Response));
+ if (Response & MMC_R0_READY_FOR_DATA) {
+ DEBUG ((DEBUG_INFO, "\t- READY_FOR_DATA\n"));
+ }
+
+ switch ((Response >> 9) & 0xF) {
+ case 0:
+ DEBUG ((DEBUG_INFO, "\t- State: Idle\n"));
+ break;
+ case 1:
+ DEBUG ((DEBUG_INFO, "\t- State: Ready\n"));
+ break;
+ case 2:
+ DEBUG ((DEBUG_INFO, "\t- State: Ident\n"));
+ break;
+ case 3:
+ DEBUG ((DEBUG_INFO, "\t- State: StandBy\n"));
+ break;
+ case 4:
+ DEBUG ((DEBUG_INFO, "\t- State: Tran\n"));
+ break;
+ case 5:
+ DEBUG ((DEBUG_INFO, "\t- State: Data\n"));
+ break;
+ case 6:
+ DEBUG ((DEBUG_INFO, "\t- State: Rcv\n"));
+ break;
+ case 7:
+ DEBUG ((DEBUG_INFO, "\t- State: Prg\n"));
+ break;
+ case 8:
+ DEBUG ((DEBUG_INFO, "\t- State: Dis\n"));
+ break;
+ default:
+ DEBUG ((DEBUG_INFO, "\t- State: Reserved\n"));
+ break;
+ }
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf
new file mode 100644
index 000000000000..fd91f47aeaf0
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf
@@ -0,0 +1,58 @@
+#/** @file
+#
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PiMmcDxe
+ FILE_GUID = b6f44cc0-9e45-11df-be21-0002a5f5f51b
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = MmcDxeInitialize
+
+[Sources.common]
+ ComponentName.c
+ Mmc.c
+ MmcBlockIo.c
+ MmcIdentification.c
+ MmcDebug.c
+ Diagnostics.c
+
+[Packages]
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ UefiLib
+ UefiDriverEntryPoint
+ BaseMemoryLib
+
+[Protocols]
+ gEfiDiskIoProtocolGuid
+ gEfiBlockIoProtocolGuid
+ gEfiDevicePathProtocolGuid
+ gEfiDriverDiagnostics2ProtocolGuid
+ gRaspberryPiMmcHostProtocolGuid
+
+[Pcd]
+ gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit
+ gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz
+ gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti
+
+[Depex]
+ TRUE
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcIdentification.c b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcIdentification.c
new file mode 100644
index 000000000000..ef819fb753c6
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcIdentification.c
@@ -0,0 +1,993 @@
+/** @file
+ *
+ * Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/TimerLib.h>
+
+#include "Mmc.h"
+
+typedef union {
+ UINT32 Raw;
+ OCR Ocr;
+} OCR_RESPONSE;
+
+#define MAX_RETRY_COUNT 1000
+#define CMD_RETRY_COUNT 20
+#define RCA_SHIFT_OFFSET 16
+#define EMMC_CARD_SIZE 512
+#define EMMC_ECSD_SIZE_OFFSET 53
+
+#define EXTCSD_BUS_WIDTH 183
+#define EXTCSD_HS_TIMING 185
+
+#define EMMC_TIMING_BACKWARD 0
+#define EMMC_TIMING_HS 1
+#define EMMC_TIMING_HS200 2
+#define EMMC_TIMING_HS400 3
+
+#define EMMC_BUS_WIDTH_1BIT 0
+#define EMMC_BUS_WIDTH_4BIT 1
+#define EMMC_BUS_WIDTH_8BIT 2
+#define EMMC_BUS_WIDTH_DDR_4BIT 5
+#define EMMC_BUS_WIDTH_DDR_8BIT 6
+
+#define EMMC_SWITCH_ERROR (1 << 7)
+
+#define SD_BUS_WIDTH_1BIT (1 << 0)
+#define SD_BUS_WIDTH_4BIT (1 << 2)
+
+#define SD_CCC_SWITCH (1 << 10)
+
+#define DEVICE_STATE(x) (((x) >> 9) & 0xf)
+typedef enum _EMMC_DEVICE_STATE {
+ EMMC_IDLE_STATE = 0,
+ EMMC_READY_STATE,
+ EMMC_IDENT_STATE,
+ EMMC_STBY_STATE,
+ EMMC_TRAN_STATE,
+ EMMC_DATA_STATE,
+ EMMC_RCV_STATE,
+ EMMC_PRG_STATE,
+ EMMC_DIS_STATE,
+ EMMC_BTST_STATE,
+ EMMC_SLP_STATE
+} EMMC_DEVICE_STATE;
+
+UINT32 mEmmcRcaCount = 0;
+
+STATIC
+EFI_STATUS
+EFIAPI
+EmmcGetDeviceState (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ OUT EMMC_DEVICE_STATE *State
+ )
+{
+ EFI_MMC_HOST_PROTOCOL *Host;
+ EFI_STATUS Status;
+ UINT32 Data, RCA;
+
+ if (State == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Host = MmcHostInstance->MmcHost;
+ RCA = MmcHostInstance->CardInfo.RCA << RCA_SHIFT_OFFSET;
+ Status = Host->SendCommand (Host, MMC_CMD13, RCA);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcGetDeviceState(): Failed to get card status, Status=%r.\n", Status));
+ return Status;
+ }
+ Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R1, &Data);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcGetDeviceState(): Failed to get response of CMD13, Status=%r.\n", Status));
+ return Status;
+ }
+ if (Data & EMMC_SWITCH_ERROR) {
+ DEBUG ((DEBUG_ERROR, "EmmcGetDeviceState(): Failed to switch expected mode, Status=%r.\n", Status));
+ return EFI_DEVICE_ERROR;
+ }
+ *State = DEVICE_STATE(Data);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+EmmcSetEXTCSD (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ UINT32 ExtCmdIndex,
+ UINT32 Value
+ )
+{
+ EFI_MMC_HOST_PROTOCOL *Host;
+ EMMC_DEVICE_STATE State;
+ EFI_STATUS Status;
+ UINT32 Argument;
+
+ Host = MmcHostInstance->MmcHost;
+ Argument = EMMC_CMD6_ARG_ACCESS(3) | EMMC_CMD6_ARG_INDEX(ExtCmdIndex) |
+ EMMC_CMD6_ARG_VALUE(Value) | EMMC_CMD6_ARG_CMD_SET(1);
+ Status = Host->SendCommand (Host, MMC_CMD6, Argument);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSetEXTCSD(): Failed to send CMD6, Status=%r.\n", Status));
+ return Status;
+ }
+ // Make sure device exiting prog mode
+ do {
+ Status = EmmcGetDeviceState (MmcHostInstance, &State);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSetEXTCSD(): Failed to get device state, Status=%r.\n", Status));
+ return Status;
+ }
+ } while (State == EMMC_PRG_STATE);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+EmmcIdentificationMode (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ IN OCR_RESPONSE Response
+ )
+{
+ EFI_MMC_HOST_PROTOCOL *Host;
+ EFI_BLOCK_IO_MEDIA *Media;
+ EFI_STATUS Status;
+ EMMC_DEVICE_STATE State;
+ UINT32 RCA;
+
+ Host = MmcHostInstance->MmcHost;
+ Media = MmcHostInstance->BlockIo.Media;
+
+ // Fetch card identity register
+ Status = Host->SendCommand (Host, MMC_CMD2, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): Failed to send CMD2, Status=%r.\n", Status));
+ return Status;
+ }
+
+ Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R2, (UINT32 *)&(MmcHostInstance->CardInfo.CIDData));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): CID retrieval error, Status=%r.\n", Status));
+ return Status;
+ }
+
+ // Assign a relative address value to the card
+ MmcHostInstance->CardInfo.RCA = ++mEmmcRcaCount; // TODO: might need a more sophisticated way of doing this
+ RCA = MmcHostInstance->CardInfo.RCA << RCA_SHIFT_OFFSET;
+ Status = Host->SendCommand (Host, MMC_CMD3, RCA);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): RCA set error, Status=%r.\n", Status));
+ return Status;
+ }
+
+ // Fetch card specific data
+ Status = Host->SendCommand (Host, MMC_CMD9, RCA);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): Failed to send CMD9, Status=%r.\n", Status));
+ return Status;
+ }
+
+ Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R2, (UINT32 *)&(MmcHostInstance->CardInfo.CSDData));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): CSD retrieval error, Status=%r.\n", Status));
+ return Status;
+ }
+
+ // Select the card
+ Status = Host->SendCommand (Host, MMC_CMD7, RCA);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): Card selection error, Status=%r.\n", Status));
+ }
+
+ if (MMC_HOST_HAS_SETIOS(Host)) {
+ // Set 1-bit bus width
+ Status = Host->SetIos (Host, 0, 1, EMMCBACKWARD);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): Set 1-bit bus width error, Status=%r.\n", Status));
+ return Status;
+ }
+
+ // Set 1-bit bus width for EXTCSD
+ Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_BUS_WIDTH, EMMC_BUS_WIDTH_1BIT);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): Set extcsd bus width error, Status=%r.\n", Status));
+ return Status;
+ }
+ }
+
+ // Fetch ECSD
+ MmcHostInstance->CardInfo.ECSDData = AllocatePages (EFI_SIZE_TO_PAGES (sizeof (ECSD)));
+ if (MmcHostInstance->CardInfo.ECSDData == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ Status = Host->SendCommand (Host, MMC_CMD8, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
+ }
+
+ Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)MmcHostInstance->CardInfo.ECSDData);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
+ goto FreePageExit;
+ }
+
+ // Make sure device exiting data mode
+ do {
+ Status = EmmcGetDeviceState (MmcHostInstance, &State);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcIdentificationMode(): Failed to get device state, Status=%r.\n", Status));
+ goto FreePageExit;
+ }
+ } while (State == EMMC_DATA_STATE);
+
+ // Set up media
+ Media->BlockSize = EMMC_CARD_SIZE; // 512-byte support is mandatory for eMMC cards
+ Media->MediaId = MmcHostInstance->CardInfo.CIDData.PSN;
+ Media->ReadOnly = MmcHostInstance->CardInfo.CSDData.PERM_WRITE_PROTECT;
+ Media->LogicalBlocksPerPhysicalBlock = 1;
+ Media->IoAlign = 4;
+ // Compute last block using bits [215:212] of the ECSD
+ Media->LastBlock = MmcHostInstance->CardInfo.ECSDData->SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
+ // Cards <2GB in size, but the model does.
+
+ // Setup card type
+ MmcHostInstance->CardInfo.CardType = EMMC_CARD;
+ return EFI_SUCCESS;
+
+FreePageExit:
+ FreePages (MmcHostInstance->CardInfo.ECSDData, EFI_SIZE_TO_PAGES (sizeof (ECSD)));
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+InitializeEmmcDevice (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ EFI_MMC_HOST_PROTOCOL *Host;
+ EFI_STATUS Status = EFI_SUCCESS;
+ ECSD *ECSDData;
+ UINT32 BusClockFreq, Idx, BusMode;
+ UINT32 BusWidth = 8;
+ UINT32 TimingMode[4] = {EMMCHS52DDR1V2, EMMCHS52DDR1V8, EMMCHS52, EMMCHS26};
+
+ Host = MmcHostInstance->MmcHost;
+ ECSDData = MmcHostInstance->CardInfo.ECSDData;
+ if (ECSDData->DEVICE_TYPE == EMMCBACKWARD){
+ return EFI_SUCCESS;
+ }
+
+ if (PcdGet32(PcdMmcForceDefaultSpeed)) {
+ DEBUG((DEBUG_WARN, "Forcing default speed mode\n"));
+ return EFI_SUCCESS;
+ }
+
+ if (PcdGet32(PcdMmcForce1Bit)) {
+ DEBUG((DEBUG_WARN, "Forcing 1 bit mode\n"));
+ BusWidth = 1;
+ }
+
+ if (!MMC_HOST_HAS_SETIOS(Host)) {
+ DEBUG((DEBUG_ERROR, "Controller doesn't support speed / bus width change\n"));
+ return EFI_SUCCESS;
+ }
+
+ Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_HS_TIMING, EMMC_TIMING_HS);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "InitializeEmmcDevice(): Failed to switch high speed mode, Status:%r.\n", Status));
+ return Status;
+ }
+
+ for (Idx = 0; Idx < 4; Idx++) {
+ switch (TimingMode[Idx]) {
+ case EMMCHS52DDR1V2:
+ case EMMCHS52DDR1V8:
+ case EMMCHS52:
+ BusClockFreq = 52000000;
+ break;
+ case EMMCHS26:
+ BusClockFreq = 26000000;
+ break;
+ default:
+ return EFI_UNSUPPORTED;
+ }
+ Status = Host->SetIos (Host, BusClockFreq, BusWidth, TimingMode[Idx]);
+ if (!EFI_ERROR (Status)) {
+ switch (TimingMode[Idx]) {
+ case EMMCHS52DDR1V2:
+ case EMMCHS52DDR1V8:
+ BusMode = EMMC_BUS_WIDTH_DDR_8BIT;
+ break;
+ case EMMCHS52:
+ case EMMCHS26:
+ BusMode = EMMC_BUS_WIDTH_8BIT;
+ break;
+ default:
+ return EFI_UNSUPPORTED;
+ }
+ Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_BUS_WIDTH, BusMode);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "InitializeEmmcDevice(): Failed to set EXTCSD bus width, Status:%r\n", Status));
+ }
+ return Status;
+ }
+ }
+ return Status;
+}
+
+STATIC
+UINT32
+SdSwitchCmdArgument (
+ IN UINT32 AccessMode,
+ IN UINT32 CommandSystem,
+ IN UINT32 DriveStrength,
+ IN UINT32 PowerLimit,
+ IN BOOLEAN Mode
+ )
+{
+ return (AccessMode & 0xF) | ((PowerLimit & 0xF) << 4) | \
+ ((DriveStrength & 0xF) << 8) | ((DriveStrength & 0xF) << 12) | \
+ (Mode ? BIT31 : 0);
+}
+
+STATIC
+EFI_STATUS
+SdSelect (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ /*
+ * Moves a card from standby to transfer state.
+ */
+ EFI_STATUS Status;
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD7,
+ MmcHostInstance->CardInfo.RCA << 16);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a: error: %r\n",
+ __FUNCTION__, Status));
+ }
+
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+SdDeselect (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ /*
+ * Moves a card from transfer to standby.
+ */
+ EFI_STATUS Status;
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD7, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a: error: %r\n",
+ __FUNCTION__, Status));
+ }
+
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+SdGetCsd(
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ IN UINT32 *Response,
+ IN BOOLEAN Print
+ )
+{
+ EFI_STATUS Status;
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD9,
+ MmcHostInstance->CardInfo.RCA << 16);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a(%u): error: %r\n", __FUNCTION__,
+ __LINE__, Status));
+ return Status;
+ }
+
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_CSD,
+ Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a(%u): error %r\n", __FUNCTION__,
+ __LINE__, Status));
+ return Status;
+ }
+
+ if (Print) {
+ PrintCSD (Response);
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+SdSet4Bit(
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ UINT32 CmdArg;
+ EFI_STATUS Status;
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ if (PcdGet32(PcdMmcForce1Bit)) {
+ DEBUG((DEBUG_WARN, "Forcing 1 bit mode\n"));
+ return EFI_SUCCESS;
+ }
+
+ if (!MMC_HOST_HAS_SETIOS(MmcHost)) {
+ DEBUG((DEBUG_WARN, "Controller doesn't support bus width change\n"));
+ return EFI_SUCCESS;
+ }
+
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+
+ /* Width: 4 */
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, 2);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(%u): error %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+
+ Status = MmcHost->SetIos (MmcHost, 0, BUSWIDTH_4, EMMCBACKWARD);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+SdSetSpeed(
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ IN BOOLEAN CccSwitch
+ )
+{
+ UINT32 Speed;
+ UINT32 CmdArg;
+ EFI_STATUS Status;
+ UINT32 Buffer[16];
+ UINT32 Response[4];
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ if (!MMC_HOST_HAS_SETIOS(MmcHost)) {
+ DEBUG((DEBUG_WARN, "Controller doesn't support speed change\n"));
+ return EFI_SUCCESS;
+ }
+
+ Speed = PcdGet32(PcdMmcSdDefaultSpeedMHz) * 1000000;
+ if (Speed == 0) {
+ Speed = SD_DEFAULT_SPEED;
+ } else {
+ DEBUG((DEBUG_INFO, "Using default speed override %u Hz\n",
+ Speed));
+ }
+
+ /*
+ * First set base speed. We'll then try HS.
+ */
+ Status = MmcHost->SetIos (MmcHost, Speed, 0, EMMCBACKWARD);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a: error setting speed %u: %r\n",
+ __FUNCTION__, Speed, Status));
+ return Status;
+ }
+
+ if (PcdGet32(PcdMmcForceDefaultSpeed)) {
+ DEBUG((DEBUG_WARN, "Forcing default speed mode\n"));
+ return EFI_SUCCESS;
+ }
+
+ if (!CccSwitch) {
+ return EFI_SUCCESS;
+ }
+
+ /* Query. */
+ CmdArg = SdSwitchCmdArgument(0xf, 0xf, 0xf, 0xf, FALSE);
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ } else {
+ Status = MmcHost->ReadBlockData (MmcHost, 0, SWITCH_CMD_DATA_LENGTH,
+ Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+ }
+
+ if (!(Buffer[3] & SD_HIGH_SPEED_SUPPORTED)) {
+ DEBUG((DEBUG_ERROR, "%a: High Speed not supported by Card\n"));
+ return EFI_SUCCESS;
+ }
+
+ /* Switch to high speed. */
+ CmdArg = SdSwitchCmdArgument(1, 0xf, 0xf, 0xf, TRUE);
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ } else {
+ Status = MmcHost->ReadBlockData (MmcHost, 0,
+ SWITCH_CMD_DATA_LENGTH, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a(%u): error: %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return Status;
+ }
+
+ if ((Buffer[4] & SWITCH_CMD_SUCCESS_MASK) != 0x1) {
+ DEBUG((DEBUG_ERROR, "Problem switching SD card into HS mode\n"));
+ DEBUG((DEBUG_ERROR, "%08x %08x %08x %08x\n",
+ Buffer[0], Buffer[1], Buffer[2], Buffer[3]));
+ DEBUG((DEBUG_ERROR, "%08x %08x %08x %08x\n",
+ Buffer[4], Buffer[5], Buffer[6], Buffer[8]));
+ return Status;
+ }
+ }
+
+ DEBUG((DEBUG_ERROR, "Dumping CSD after high-speed switch\n"));
+ SdDeselect(MmcHostInstance);
+ SdGetCsd(MmcHostInstance, Response, TRUE);
+ SdSelect(MmcHostInstance);
+
+ Speed = PcdGet32(PcdMmcSdHighSpeedMHz) * 1000000;
+ if (Speed == 0) {
+ Speed = SD_HIGH_SPEED;
+ } else {
+ DEBUG((DEBUG_INFO, "Using high speed override %u Hz\n",
+ Speed));
+ }
+
+ Status = MmcHost->SetIos (MmcHost, Speed, 0, EMMCBACKWARD);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "%a: error setting speed %u: %r\n",
+ __FUNCTION__, Speed, Status));
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+InitializeSdMmcDevice (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ UINT32 Response[4];
+ UINT32 Buffer[128];
+ UINTN BlockSize;
+ UINTN CardSize;
+ UINTN NumBlocks;
+ BOOLEAN CccSwitch;
+ SCR Scr;
+ EFI_STATUS Status;
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ Status = SdGetCsd (MmcHostInstance, Response, TRUE);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (MMC_CSD_GET_CCC(Response) & SD_CCC_SWITCH) {
+ CccSwitch = TRUE;
+ } else {
+ CccSwitch = FALSE;
+ }
+
+ if (MmcHostInstance->CardInfo.CardType == SD_CARD_2_HIGH) {
+ CardSize = HC_MMC_CSD_GET_DEVICESIZE (Response);
+ NumBlocks = ((CardSize + 1) * 1024);
+ BlockSize = 1 << MMC_CSD_GET_READBLLEN (Response);
+ } else {
+ CardSize = MMC_CSD_GET_DEVICESIZE (Response);
+ NumBlocks = (CardSize + 1) * (1 << (MMC_CSD_GET_DEVICESIZEMULT (Response) + 2));
+ BlockSize = 1 << MMC_CSD_GET_READBLLEN (Response);
+ }
+
+ // For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes.
+ if (BlockSize > 512) {
+ NumBlocks = MultU64x32 (NumBlocks, BlockSize / 512);
+ BlockSize = 512;
+ }
+
+ MmcHostInstance->BlockIo.Media->LastBlock = (NumBlocks - 1);
+ MmcHostInstance->BlockIo.Media->BlockSize = BlockSize;
+ MmcHostInstance->BlockIo.Media->ReadOnly = MmcHost->IsReadOnly (MmcHost);
+ MmcHostInstance->BlockIo.Media->MediaPresent = TRUE;
+ MmcHostInstance->BlockIo.Media->MediaId++;
+
+ Status = SdSelect(MmcHostInstance);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD55,
+ MmcHostInstance->CardInfo.RCA << 16);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a (MMC_CMD55): Error and Status = %r\n", __FUNCTION__, Status));
+ return Status;
+ }
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a (MMC_CMD55): Error and Status = %r\n", __FUNCTION__, Status));
+ return Status;
+ }
+ if ((Response[0] & MMC_STATUS_APP_CMD) == 0) {
+ return EFI_SUCCESS;
+ }
+
+ /* SCR */
+ Status = MmcHost->SendCommand (MmcHost, MMC_ACMD51, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(MMC_ACMD51): Error and Status = %r\n", __func__, Status));
+ return Status;
+ } else {
+ Status = MmcHost->ReadBlockData (MmcHost, 0, 8, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(MMC_ACMD51): ReadBlockData Error and Status = %r\n", __func__, Status));
+ return Status;
+ }
+ CopyMem (&Scr, Buffer, 8);
+ if (Scr.SD_SPEC == 2) {
+ if (Scr.SD_SPEC3 == 1) {
+ if (Scr.SD_SPEC4 == 1) {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 4.xx\n"));
+ } else {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 3.0x\n"));
+ }
+ } else {
+ if (Scr.SD_SPEC4 == 0) {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 2.0\n"));
+ } else {
+ DEBUG ((DEBUG_ERROR, "Found invalid SD Card\n"));
+ }
+ }
+ } else {
+ if ((Scr.SD_SPEC3 == 0) && (Scr.SD_SPEC4 == 0)) {
+ if (Scr.SD_SPEC == 1) {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 1.10\n"));
+ } else {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 1.0\n"));
+ }
+ } else {
+ DEBUG ((DEBUG_ERROR, "Found invalid SD Card\n"));
+ }
+ }
+ }
+
+ Status = SdSetSpeed(MmcHostInstance, CccSwitch);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ if (Scr.SD_BUS_WIDTHS & SD_BUS_WIDTH_4BIT) {
+ Status = SdSet4Bit(MmcHostInstance);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+MmcIdentificationMode (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Response[4];
+ UINTN Timeout;
+ UINTN CmdArg;
+ BOOLEAN IsHCS;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+ OCR_RESPONSE OcrResponse;
+
+ MmcHost = MmcHostInstance->MmcHost;
+ CmdArg = 0;
+ IsHCS = FALSE;
+
+ if (MmcHost == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // We can get into this function if we restart the identification mode
+ if (MmcHostInstance->State == MmcHwInitializationState) {
+ // Initialize the MMC Host HW
+ Status = MmcNotifyState (MmcHostInstance, MmcHwInitializationState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Error MmcHwInitializationState, Status=%r.\n", Status));
+ return Status;
+ }
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD0, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode(MMC_CMD0): Error, Status=%r.\n", Status));
+ return Status;
+ }
+ Status = MmcNotifyState (MmcHostInstance, MmcIdleState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Error MmcIdleState, Status=%r.\n", Status));
+ return Status;
+ }
+
+ // Send CMD1 to get OCR (MMC)
+ // This command only valid for MMC and eMMC
+ Timeout = MAX_RETRY_COUNT;
+ do {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD1, EMMC_CMD1_CAPACITY_GREATER_THAN_2GB);
+ if (EFI_ERROR (Status))
+ break;
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, (UINT32 *)&OcrResponse);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Failed to receive OCR, Status=%r.\n", Status));
+ return Status;
+ }
+ Timeout--;
+ } while (!OcrResponse.Ocr.PowerUp && (Timeout > 0));
+ if (Status == EFI_SUCCESS) {
+ if (!OcrResponse.Ocr.PowerUp) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode(MMC_CMD1): Card initialisation failure, Status=%r.\n", Status));
+ return EFI_DEVICE_ERROR;
+ }
+ OcrResponse.Ocr.PowerUp = 0;
+ if (OcrResponse.Raw == EMMC_CMD1_CAPACITY_GREATER_THAN_2GB) {
+ MmcHostInstance->CardInfo.OCRData.AccessMode = BIT1;
+ }
+ else {
+ MmcHostInstance->CardInfo.OCRData.AccessMode = 0x0;
+ }
+ // Check whether MMC or eMMC
+ if (OcrResponse.Raw == EMMC_CMD1_CAPACITY_GREATER_THAN_2GB ||
+ OcrResponse.Raw == EMMC_CMD1_CAPACITY_LESS_THAN_2GB) {
+ return EmmcIdentificationMode (MmcHostInstance, OcrResponse);
+ }
+ }
+
+ // Are we using SDIO ?
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD5, 0);
+ if (Status == EFI_SUCCESS) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode(MMC_CMD5): Error - SDIO not supported, Status=%r.\n", Status));
+ return EFI_UNSUPPORTED;
+ }
+
+ // Check which kind of card we are using. Ver2.00 or later SD Memory Card (PL180 is SD v1.1)
+ CmdArg = (0x0UL << 12 | BIT8 | 0xCEUL << 0);
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD8, CmdArg);
+ if (Status == EFI_SUCCESS) {
+ DEBUG ((DEBUG_ERROR, "Card is SD2.0 => Supports high capacity\n"));
+ IsHCS = TRUE;
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R7, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Failed to receive response to CMD8, Status=%r.\n", Status));
+ return Status;
+ }
+ PrintResponseR1 (Response[0]);
+ // Check if it is valid response
+ if (Response[0] != CmdArg) {
+ DEBUG ((DEBUG_ERROR, "The Card is not usable\n"));
+ return EFI_UNSUPPORTED;
+ }
+ } else {
+ DEBUG ((DEBUG_ERROR, "Not a SD2.0 Card\n"));
+ }
+
+ // We need to wait for the MMC or SD card is ready => (gCardInfo.OCRData.PowerUp == 1)
+ Timeout = MAX_RETRY_COUNT;
+ while (Timeout > 0) {
+ // SD Card or MMC Card ? CMD55 indicates to the card that the next command is an application specific command
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, 0);
+ if (Status == EFI_SUCCESS) {
+ DEBUG ((DEBUG_INFO, "Card should be SD\n"));
+ if (IsHCS) {
+ MmcHostInstance->CardInfo.CardType = SD_CARD_2;
+ } else {
+ MmcHostInstance->CardInfo.CardType = SD_CARD;
+ }
+
+ // Note: The first time CmdArg will be zero
+ CmdArg = ((UINTN *) &(MmcHostInstance->CardInfo.OCRData))[0];
+ if (IsHCS) {
+ CmdArg |= BIT30;
+ }
+ Status = MmcHost->SendCommand (MmcHost, MMC_ACMD41, CmdArg);
+ if (!EFI_ERROR (Status)) {
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Failed to receive OCR, Status=%r.\n", Status));
+ return Status;
+ }
+ ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];
+ }
+ } else {
+ DEBUG ((DEBUG_INFO, "Card should be MMC\n"));
+ MmcHostInstance->CardInfo.CardType = MMC_CARD;
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD1, 0x800000);
+ if (!EFI_ERROR (Status)) {
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Failed to receive OCR, Status=%r.\n", Status));
+ return Status;
+ }
+ ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];
+ }
+ }
+
+ if (!EFI_ERROR (Status)) {
+ if (!MmcHostInstance->CardInfo.OCRData.PowerUp) {
+ gBS->Stall (1);
+ Timeout--;
+ } else {
+ if ((MmcHostInstance->CardInfo.CardType == SD_CARD_2) && (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1)) {
+ MmcHostInstance->CardInfo.CardType = SD_CARD_2_HIGH;
+ DEBUG ((DEBUG_ERROR, "High capacity card.\n"));
+ }
+ break; // The MMC/SD card is ready. Continue the Identification Mode
+ }
+ } else {
+ gBS->Stall (1);
+ Timeout--;
+ }
+ }
+
+ if (Timeout == 0) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode(): No Card\n"));
+ return EFI_NO_MEDIA;
+ } else {
+ PrintOCR (Response[0]);
+ }
+
+ Status = MmcNotifyState (MmcHostInstance, MmcReadyState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Error MmcReadyState\n"));
+ return Status;
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD2, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode(MMC_CMD2): Error\n"));
+ return Status;
+ }
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_CID, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Failed to receive CID, Status=%r.\n", Status));
+ return Status;
+ }
+
+ PrintCID (Response);
+
+ Status = MmcHost->NotifyState (MmcHost, MmcIdentificationState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Error MmcIdentificationState\n"));
+ return Status;
+ }
+
+ //
+ // Note, SD specifications say that "if the command execution causes a state change, it
+ // will be visible to the host in the response to the next command"
+ // The status returned for this CMD3 will be 2 - identification
+ //
+ CmdArg = 1;
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD3, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode(MMC_CMD3): Error\n"));
+ return Status;
+ }
+
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_RCA, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Failed to receive RCA, Status=%r.\n", Status));
+ return Status;
+ }
+ PrintRCA (Response[0]);
+
+ // For MMC card, RCA is assigned by CMD3 while CMD3 dumps the RCA for SD card
+ if (MmcHostInstance->CardInfo.CardType != MMC_CARD) {
+ MmcHostInstance->CardInfo.RCA = Response[0] >> 16;
+ } else {
+ MmcHostInstance->CardInfo.RCA = CmdArg;
+ }
+ Status = MmcNotifyState (MmcHostInstance, MmcStandByState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmcIdentificationMode() : Error MmcStandByState\n"));
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+InitializeMmcDevice (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ EFI_STATUS Status;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+ UINTN BlockCount;
+
+ BlockCount = 1;
+ MmcHost = MmcHostInstance->MmcHost;
+
+ Status = MmcIdentificationMode (MmcHostInstance);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "InitializeMmcDevice(): Error in Identification Mode, Status=%r\n", Status));
+ return Status;
+ }
+
+ Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "InitializeMmcDevice(): Error MmcTransferState, Status=%r\n", Status));
+ return Status;
+ }
+
+ if (MmcHostInstance->CardInfo.CardType != EMMC_CARD) {
+ Status = InitializeSdMmcDevice (MmcHostInstance);
+ } else {
+ Status = InitializeEmmcDevice (MmcHostInstance);
+ }
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Set Block Length
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD16, MmcHostInstance->BlockIo.Media->BlockSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "InitializeMmcDevice(MMC_CMD16): Error MmcHostInstance->BlockIo.Media->BlockSize: %d and Error = %r\n",
+ MmcHostInstance->BlockIo.Media->BlockSize, Status));
+ return Status;
+ }
+
+ // Block Count (not used). Could return an error for SD card
+ if (MmcHostInstance->CardInfo.CardType == MMC_CARD) {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD23, BlockCount);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "InitializeMmcDevice(MMC_CMD23): Error, Status=%r\n", Status));
+ return Status;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c b/Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
new file mode 100644
index 000000000000..36b953d9c5f4
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
@@ -0,0 +1,915 @@
+/** @file
+ *
+ * Static SMBIOS Table for ARM platform
+ * Derived from EmulatorPkg package
+ *
+ * Note SMBIOS 2.7.1 Required structures:
+ * BIOS Information (Type 0)
+ * System Information (Type 1)
+ * Board Information (Type 2)
+ * System Enclosure (Type 3)
+ * Processor Information (Type 4) - CPU Driver
+ * Cache Information (Type 7) - For cache that is external to processor
+ * System Slots (Type 9) - If system has slots
+ * Physical Memory Array (Type 16)
+ * Memory Device (Type 17) - For each socketed system-memory Device
+ * Memory Array Mapped Address (Type 19) - One per contiguous block per Physical Memroy Array
+ * System Boot Information (Type 32)
+ *
+ * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2013, Linaro.org
+ * Copyright (c) 2012, Apple Inc. All rights reserved.<BR>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Base.h>
+#include <Protocol/Smbios.h>
+#include <Protocol/RaspberryPiFirmware.h>
+#include <IndustryStandard/SmBios.h>
+#include <IndustryStandard/RpiFirmware.h>
+#include <Guid/SmBios.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/PrintLib.h>
+#include <Utils.h>
+
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+
+/***********************************************************************
+ SMBIOS data definition TYPE0 BIOS Information
+************************************************************************/
+SMBIOS_TABLE_TYPE0 mBIOSInfoType0 = {
+ { EFI_SMBIOS_TYPE_BIOS_INFORMATION, sizeof (SMBIOS_TABLE_TYPE0), 0 },
+ 1, // Vendor String
+ 2, // BiosVersion String
+ 0x0, // BiosSegment
+ 3, // BiosReleaseDate String
+ 0x1F, // BiosSize
+ { // BiosCharacteristics
+ 0, // Reserved :2; ///< Bits 0-1.
+ 0, // Unknown :1;
+ 0, // BiosCharacteristicsNotSupported :1;
+ 0, // IsaIsSupported :1;
+ 0, // McaIsSupported :1;
+ 0, // EisaIsSupported :1;
+ 0, // PciIsSupported :1;
+ 0, // PcmciaIsSupported :1;
+ 0, // PlugAndPlayIsSupported :1;
+ 0, // ApmIsSupported :1;
+ 0, // BiosIsUpgradable :1;
+ 0, // BiosShadowingAllowed :1;
+ 0, // VlVesaIsSupported :1;
+ 0, // EscdSupportIsAvailable :1;
+ 0, // BootFromCdIsSupported :1;
+ 1, // SelectableBootIsSupported :1;
+ 0, // RomBiosIsSocketed :1;
+ 0, // BootFromPcmciaIsSupported :1;
+ 0, // EDDSpecificationIsSupported :1;
+ 0, // JapaneseNecFloppyIsSupported :1;
+ 0, // JapaneseToshibaFloppyIsSupported :1;
+ 0, // Floppy525_360IsSupported :1;
+ 0, // Floppy525_12IsSupported :1;
+ 0, // Floppy35_720IsSupported :1;
+ 0, // Floppy35_288IsSupported :1;
+ 0, // PrintScreenIsSupported :1;
+ 0, // Keyboard8042IsSupported :1;
+ 0, // SerialIsSupported :1;
+ 0, // PrinterIsSupported :1;
+ 0, // CgaMonoIsSupported :1;
+ 0, // NecPc98 :1;
+ 0 // ReservedForVendor :32; ///< Bits 32-63. Bits 32-47 reserved for BIOS vendor
+ ///< and bits 48-63 reserved for System Vendor.
+ },
+ { // BIOSCharacteristicsExtensionBytes[]
+ 0x01, // AcpiIsSupported :1;
+ // UsbLegacyIsSupported :1;
+ // AgpIsSupported :1;
+ // I2OBootIsSupported :1;
+ // Ls120BootIsSupported :1;
+ // AtapiZipDriveBootIsSupported :1;
+ // Boot1394IsSupported :1;
+ // SmartBatteryIsSupported :1;
+ // BIOSCharacteristicsExtensionBytes[1]
+ 0x0e, // BiosBootSpecIsSupported :1;
+ // FunctionKeyNetworkBootIsSupported :1;
+ // TargetContentDistributionEnabled :1;
+ // UefiSpecificationSupported :1;
+ // VirtualMachineSupported :1;
+ // ExtensionByte2Reserved :3;
+ },
+ 0xFF, // SystemBiosMajorRelease
+ 0xFF, // SystemBiosMinorRelease
+ 0xFF, // EmbeddedControllerFirmwareMajorRelease
+ 0xFF, // EmbeddedControllerFirmwareMinorRelease
+};
+
+CHAR8 *mBIOSInfoType0Strings[] = {
+ "https://github.com/andreiw/RaspberryPiPkg", // Vendor String
+ "Raspberry Pi 64-bit UEFI (" __DATE__ " " __TIME__ ")", // BiosVersion String
+ __DATE__,
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE1 System Information
+************************************************************************/
+SMBIOS_TABLE_TYPE1 mSysInfoType1 = {
+ { EFI_SMBIOS_TYPE_SYSTEM_INFORMATION, sizeof (SMBIOS_TABLE_TYPE1), 0 },
+ 1, // Manufacturer String
+ 2, // ProductName String
+ 3, // Version String
+ 4, // SerialNumber String
+ { 0x25EF0280, 0xEC82, 0x42B0, { 0x8F, 0xB6, 0x10, 0xAD, 0xCC, 0xC6, 0x7C, 0x02 } },
+ SystemWakeupTypePowerSwitch,
+ 5, // SKUNumber String
+ 6, // Family String
+};
+
+#define PROD_BASE 8
+#define PROD_KNOWN 13
+#define PROD_UNKNOWN 11
+CHAR8 *ProductNames[] = {
+ /* 8 */ "3",
+ /* 9 */ "Zero",
+ /* 10 */ "CM3",
+ /* 11 */ "???",
+ /* 12 */ "Zero W",
+ /* 13 */ "3B+"
+};
+
+#define MANU_UNKNOWN 0
+#define MANU_KNOWN 4
+#define MANU_BASE 1
+CHAR8 *ManufNames[] = {
+ "???",
+ /* 0 */ "Sony",
+ /* 1 */ "Egoman",
+ /* 2 */ "Embest",
+ /* 3 */ "Sony Japan",
+ /* 4 */ "Embest"
+};
+
+CHAR8 mSysInfoManufName[sizeof("Sony Japan")];
+CHAR8 mSysInfoProductName[sizeof("64-bit Raspberry Pi XXXXXX (rev. xxxxxxxx)")];
+CHAR8 mSysInfoSerial[sizeof(UINT64) * 2 + 1];
+CHAR8 mSysInfoSKU[sizeof(UINT64) * 2 + 1];
+
+CHAR8 *mSysInfoType1Strings[] = {
+ mSysInfoManufName,
+ mSysInfoProductName,
+ mSysInfoProductName,
+ mSysInfoSerial,
+ mSysInfoSKU,
+ "edk2",
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE2 Board Information
+************************************************************************/
+SMBIOS_TABLE_TYPE2 mBoardInfoType2 = {
+ { EFI_SMBIOS_TYPE_BASEBOARD_INFORMATION, sizeof (SMBIOS_TABLE_TYPE2), 0 },
+ 1, // Manufacturer String
+ 2, // ProductName String
+ 3, // Version String
+ 4, // SerialNumber String
+ 5, // AssetTag String
+ { // FeatureFlag
+ 1, // Motherboard :1;
+ 0, // RequiresDaughterCard :1;
+ 0, // Removable :1;
+ 0, // Replaceable :1;
+ 0, // HotSwappable :1;
+ 0, // Reserved :3;
+ },
+ 6, // LocationInChassis String
+ 0, // ChassisHandle;
+ BaseBoardTypeMotherBoard, // BoardType;
+ 0, // NumberOfContainedObjectHandles;
+ { 0 } // ContainedObjectHandles[1];
+};
+CHAR8 *mBoardInfoType2Strings[] = {
+ mSysInfoManufName,
+ mSysInfoProductName,
+ mSysInfoProductName,
+ mSysInfoSerial,
+ "None",
+ mSysInfoSKU,
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE3 Enclosure Information
+************************************************************************/
+SMBIOS_TABLE_TYPE3 mEnclosureInfoType3 = {
+ { EFI_SMBIOS_TYPE_SYSTEM_ENCLOSURE, sizeof (SMBIOS_TABLE_TYPE3), 0 },
+ 1, // Manufacturer String
+ MiscChassisEmbeddedPc, // Type;
+ 2, // Version String
+ 3, // SerialNumber String
+ 4, // AssetTag String
+ ChassisStateSafe, // BootupState;
+ ChassisStateSafe, // PowerSupplyState;
+ ChassisStateSafe, // ThermalState;
+ ChassisSecurityStatusNone,// SecurityStatus;
+ { 0, 0, 0, 0 }, // OemDefined[4];
+ 0, // Height;
+ 0, // NumberofPowerCords;
+ 0, // ContainedElementCount;
+ 0, // ContainedElementRecordLength;
+ { { 0 } }, // ContainedElements[1];
+};
+CHAR8 *mEnclosureInfoType3Strings[] = {
+ mSysInfoManufName,
+ mSysInfoProductName,
+ mSysInfoSerial,
+ "None",
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE4 Processor Information
+************************************************************************/
+SMBIOS_TABLE_TYPE4 mProcessorInfoType4 = {
+ { EFI_SMBIOS_TYPE_PROCESSOR_INFORMATION, sizeof (SMBIOS_TABLE_TYPE4), 0},
+ 1, // Socket String
+ CentralProcessor, // ProcessorType; ///< The enumeration value from PROCESSOR_TYPE_DATA.
+ ProcessorFamilyIndicatorFamily2, // ProcessorFamily; ///< The enumeration value from PROCESSOR_FAMILY2_DATA.
+ 2, // ProcessorManufacture String;
+ { // ProcessorId;
+ { // PROCESSOR_SIGNATURE
+ 0, // ProcessorSteppingId:4;
+ 0, // ProcessorModel: 4;
+ 0, // ProcessorFamily: 4;
+ 0, // ProcessorType: 2;
+ 0, // ProcessorReserved1: 2;
+ 0, // ProcessorXModel: 4;
+ 0, // ProcessorXFamily: 8;
+ 0, // ProcessorReserved2: 4;
+ },
+
+ { // PROCESSOR_FEATURE_FLAGS
+ 0, // ProcessorFpu :1;
+ 0, // ProcessorVme :1;
+ 0, // ProcessorDe :1;
+ 0, // ProcessorPse :1;
+ 0, // ProcessorTsc :1;
+ 0, // ProcessorMsr :1;
+ 0, // ProcessorPae :1;
+ 0, // ProcessorMce :1;
+ 0, // ProcessorCx8 :1;
+ 0, // ProcessorApic :1;
+ 0, // ProcessorReserved1 :1;
+ 0, // ProcessorSep :1;
+ 0, // ProcessorMtrr :1;
+ 0, // ProcessorPge :1;
+ 0, // ProcessorMca :1;
+ 0, // ProcessorCmov :1;
+ 0, // ProcessorPat :1;
+ 0, // ProcessorPse36 :1;
+ 0, // ProcessorPsn :1;
+ 0, // ProcessorClfsh :1;
+ 0, // ProcessorReserved2 :1;
+ 0, // ProcessorDs :1;
+ 0, // ProcessorAcpi :1;
+ 0, // ProcessorMmx :1;
+ 0, // ProcessorFxsr :1;
+ 0, // ProcessorSse :1;
+ 0, // ProcessorSse2 :1;
+ 0, // ProcessorSs :1;
+ 0, // ProcessorReserved3 :1;
+ 0, // ProcessorTm :1;
+ 0, // ProcessorReserved4 :2;
+ }
+ },
+ 3, // ProcessorVersion String;
+ { // Voltage;
+ 1, // ProcessorVoltageCapability5V :1;
+ 1, // ProcessorVoltageCapability3_3V :1;
+ 1, // ProcessorVoltageCapability2_9V :1;
+ 0, // ProcessorVoltageCapabilityReserved :1; ///< Bit 3, must be zero.
+ 0, // ProcessorVoltageReserved :3; ///< Bits 4-6, must be zero.
+ 0 // ProcessorVoltageIndicateLegacy :1;
+ },
+ 0, // ExternalClock;
+ 0, // MaxSpeed;
+ 0, // CurrentSpeed;
+ 0x41, // Status;
+ ProcessorUpgradeOther, // ProcessorUpgrade; ///< The enumeration value from PROCESSOR_UPGRADE.
+ 0, // L1CacheHandle;
+ 0, // L2CacheHandle;
+ 0, // L3CacheHandle;
+ 4, // SerialNumber;
+ 5, // AssetTag;
+ 6, // PartNumber;
+ 4, // CoreCount;
+ 4, // EnabledCoreCount;
+ 4, // ThreadCount;
+ 0x6C, // ProcessorCharacteristics;
+ ProcessorFamilyARM, // ARM Processor Family;
+};
+
+CHAR8 *mProcessorInfoType4Strings[] = {
+ "Socket",
+ "ARM",
+ "BCM2837 ARMv8",
+ "1.0",
+ "1.0",
+ "1.0",
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE7 Cache Information
+************************************************************************/
+SMBIOS_TABLE_TYPE7 mCacheInfoType7 = {
+ { EFI_SMBIOS_TYPE_CACHE_INFORMATION, sizeof (SMBIOS_TABLE_TYPE7), 0 },
+ 1, // SocketDesignation String
+ 0x018A, // Cache Configuration
+ 0x00FF, // Maximum Size 256k
+ 0x00FF, // Install Size 256k
+ { // Supported SRAM Type
+ 0, //Other :1
+ 0, //Unknown :1
+ 0, //NonBurst :1
+ 1, //Burst :1
+ 0, //PiplelineBurst :1
+ 1, //Synchronous :1
+ 0, //Asynchronous :1
+ 0 //Reserved :9
+ },
+ { // Current SRAM Type
+ 0, //Other :1
+ 0, //Unknown :1
+ 0, //NonBurst :1
+ 1, //Burst :1
+ 0, //PiplelineBurst :1
+ 1, //Synchronous :1
+ 0, //Asynchronous :1
+ 0 //Reserved :9
+ },
+ 0, // Cache Speed unknown
+ CacheErrorMultiBit, // Error Correction Multi
+ CacheTypeUnknown, // System Cache Type
+ CacheAssociativity2Way // Associativity
+};
+CHAR8 *mCacheInfoType7Strings[] = {
+ "Cache1",
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE9 System Slot Information
+************************************************************************/
+SMBIOS_TABLE_TYPE9 mSysSlotInfoType9 = {
+ { EFI_SMBIOS_TYPE_SYSTEM_SLOTS, sizeof (SMBIOS_TABLE_TYPE9), 0 },
+ 1, // SlotDesignation String
+ SlotTypeOther, // SlotType; ///< The enumeration value from MISC_SLOT_TYPE.
+ SlotDataBusWidthOther, // SlotDataBusWidth; ///< The enumeration value from MISC_SLOT_DATA_BUS_WIDTH.
+ SlotUsageAvailable, // CurrentUsage; ///< The enumeration value from MISC_SLOT_USAGE.
+ SlotLengthOther, // SlotLength; ///< The enumeration value from MISC_SLOT_LENGTH.
+ 0, // SlotID;
+ { // SlotCharacteristics1;
+ 1, // CharacteristicsUnknown :1;
+ 0, // Provides50Volts :1;
+ 0, // Provides33Volts :1;
+ 0, // SharedSlot :1;
+ 0, // PcCard16Supported :1;
+ 0, // CardBusSupported :1;
+ 0, // ZoomVideoSupported :1;
+ 0, // ModemRingResumeSupported:1;
+ },
+ { // SlotCharacteristics2;
+ 0, // PmeSignalSupported :1;
+ 0, // HotPlugDevicesSupported :1;
+ 0, // SmbusSignalSupported :1;
+ 0, // Reserved :5; ///< Set to 0.
+ },
+ 0, // SegmentGroupNum;
+ 0, // BusNum;
+ 0, // DevFuncNum;
+};
+CHAR8 *mSysSlotInfoType9Strings[] = {
+ "SD Card",
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE16 Physical Memory ArrayInformation
+************************************************************************/
+SMBIOS_TABLE_TYPE16 mPhyMemArrayInfoType16 = {
+ { EFI_SMBIOS_TYPE_PHYSICAL_MEMORY_ARRAY, sizeof (SMBIOS_TABLE_TYPE16), 0 },
+ MemoryArrayLocationSystemBoard, // Location; ///< The enumeration value from MEMORY_ARRAY_LOCATION.
+ MemoryArrayUseSystemMemory, // Use; ///< The enumeration value from MEMORY_ARRAY_USE.
+ MemoryErrorCorrectionUnknown, // MemoryErrorCorrection; ///< The enumeration value from MEMORY_ERROR_CORRECTION.
+ 0x40000000, // MaximumCapacity;
+ 0xFFFE, // MemoryErrorInformationHandle;
+ 1, // NumberOfMemoryDevices;
+ 0x40000000ULL, // ExtendedMaximumCapacity;
+};
+CHAR8 *mPhyMemArrayInfoType16Strings[] = {
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE17 Memory Device Information
+************************************************************************/
+SMBIOS_TABLE_TYPE17 mMemDevInfoType17 = {
+ { EFI_SMBIOS_TYPE_MEMORY_DEVICE, sizeof (SMBIOS_TABLE_TYPE17), 0 },
+ 0, // MemoryArrayHandle; // Should match SMBIOS_TABLE_TYPE16.Handle, initialized at runtime, refer to PhyMemArrayInfoUpdateSmbiosType16()
+ 0xFFFE, // MemoryErrorInformationHandle;
+ 0xFFFF, // TotalWidth;
+ 0xFFFF, // DataWidth;
+ 0x0400, // Size; // When bit 15 is 0: Size in MB
+ // When bit 15 is 1: Size in KB, and continues in ExtendedSize
+ MemoryFormFactorUnknown, // FormFactor; ///< The enumeration value from MEMORY_FORM_FACTOR.
+ 0xff, // DeviceSet;
+ 1, // DeviceLocator String
+ 2, // BankLocator String
+ MemoryTypeDram, // MemoryType; ///< The enumeration value from MEMORY_DEVICE_TYPE.
+ { // TypeDetail;
+ 0, // Reserved :1;
+ 0, // Other :1;
+ 1, // Unknown :1;
+ 0, // FastPaged :1;
+ 0, // StaticColumn :1;
+ 0, // PseudoStatic :1;
+ 0, // Rambus :1;
+ 0, // Synchronous :1;
+ 0, // Cmos :1;
+ 0, // Edo :1;
+ 0, // WindowDram :1;
+ 0, // CacheDram :1;
+ 0, // Nonvolatile :1;
+ 0, // Registered :1;
+ 0, // Unbuffered :1;
+ 0, // Reserved1 :1;
+ },
+ 0, // Speed;
+ 3, // Manufacturer String
+ 0, // SerialNumber String
+ 0, // AssetTag String
+ 0, // PartNumber String
+ 0, // Attributes;
+ 0, // ExtendedSize;
+ 0, // ConfiguredMemoryClockSpeed;
+};
+CHAR8 *mMemDevInfoType17Strings[] = {
+ "OS Virtual Memory",
+ "malloc",
+ "OSV",
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE19 Memory Array Mapped Address Information
+************************************************************************/
+SMBIOS_TABLE_TYPE19 mMemArrMapInfoType19 = {
+ { EFI_SMBIOS_TYPE_MEMORY_ARRAY_MAPPED_ADDRESS, sizeof (SMBIOS_TABLE_TYPE19), 0 },
+ 0x00000000, // StartingAddress;
+ 0x00000000, // EndingAddress;
+ 0, // MemoryArrayHandle;
+ 1, // PartitionWidth;
+ 0, // ExtendedStartingAddress;
+ 0, // ExtendedEndingAddress;
+};
+CHAR8 *mMemArrMapInfoType19Strings[] = {
+ NULL
+};
+
+/***********************************************************************
+ SMBIOS data definition TYPE32 Boot Information
+************************************************************************/
+SMBIOS_TABLE_TYPE32 mBootInfoType32 = {
+ { EFI_SMBIOS_TYPE_SYSTEM_BOOT_INFORMATION, sizeof (SMBIOS_TABLE_TYPE32), 0 },
+ { 0, 0, 0, 0, 0, 0 }, // Reserved[6];
+ BootInformationStatusNoError // BootStatus
+};
+
+CHAR8 *mBootInfoType32Strings[] = {
+ NULL
+};
+
+
+/**
+
+ Create SMBIOS record.
+
+ Converts a fixed SMBIOS structure and an array of pointers to strings into
+ an SMBIOS record where the strings are cat'ed on the end of the fixed record
+ and terminated via a double NULL and add to SMBIOS table.
+
+ SMBIOS_TABLE_TYPE32 gSmbiosType12 = {
+ { EFI_SMBIOS_TYPE_SYSTEM_CONFIGURATION_OPTIONS, sizeof (SMBIOS_TABLE_TYPE12), 0 },
+ 1 // StringCount
+ };
+
+ CHAR8 *gSmbiosType12Strings[] = {
+ "Not Found",
+ NULL
+ };
+
+ ...
+
+ LogSmbiosData (
+ (EFI_SMBIOS_TABLE_HEADER*)&gSmbiosType12,
+ gSmbiosType12Strings
+ );
+
+ @param Template Fixed SMBIOS structure, required.
+ @param StringPack Array of strings to convert to an SMBIOS string pack.
+ NULL is OK.
+ @param DataSmbiosHande The new SMBIOS record handle .
+ NULL is OK.
+**/
+
+EFI_STATUS
+EFIAPI
+LogSmbiosData (
+ IN EFI_SMBIOS_TABLE_HEADER *Template,
+ IN CHAR8 **StringPack,
+ OUT EFI_SMBIOS_HANDLE *DataSmbiosHande
+ )
+{
+ EFI_STATUS Status;
+ EFI_SMBIOS_PROTOCOL *Smbios;
+ EFI_SMBIOS_HANDLE SmbiosHandle;
+ EFI_SMBIOS_TABLE_HEADER *Record;
+ UINTN Index;
+ UINTN StringSize;
+ UINTN Size;
+ CHAR8 *Str;
+
+ //
+ // Locate Smbios protocol.
+ //
+ Status = gBS->LocateProtocol (&gEfiSmbiosProtocolGuid, NULL, (VOID **)&Smbios);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Calculate the size of the fixed record and optional string pack
+
+ Size = Template->Length;
+ if (StringPack == NULL) {
+ // At least a double null is required
+ Size += 2;
+ } else {
+ for (Index = 0; StringPack[Index] != NULL; Index++) {
+ StringSize = AsciiStrSize (StringPack[Index]);
+ Size += StringSize;
+ }
+ if (StringPack[0] == NULL) {
+ // At least a double null is required
+ Size += 1;
+ }
+
+ // Don't forget the terminating double null
+ Size += 1;
+ }
+
+ // Copy over Template
+ Record = (EFI_SMBIOS_TABLE_HEADER *)AllocateZeroPool (Size);
+ if (Record == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ CopyMem (Record, Template, Template->Length);
+
+ // Append string pack
+ Str = ((CHAR8 *)Record) + Record->Length;
+
+ for (Index = 0; StringPack[Index] != NULL; Index++) {
+ StringSize = AsciiStrSize (StringPack[Index]);
+ CopyMem (Str, StringPack[Index], StringSize);
+ Str += StringSize;
+ }
+
+ *Str = 0;
+ SmbiosHandle = SMBIOS_HANDLE_PI_RESERVED;
+ Status = Smbios->Add (
+ Smbios,
+ gImageHandle,
+ &SmbiosHandle,
+ Record
+ );
+
+ if ((Status == EFI_SUCCESS) && (DataSmbiosHande != NULL)) {
+ *DataSmbiosHande = SmbiosHandle;
+ }
+
+ ASSERT_EFI_ERROR (Status);
+ FreePool (Record);
+ return Status;
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE0 BIOS Information
+************************************************************************/
+VOID
+BIOSInfoUpdateSmbiosType0 (
+ VOID
+ )
+{
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mBIOSInfoType0, mBIOSInfoType0Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE1 System Information
+************************************************************************/
+VOID
+I64ToHexString(
+ IN OUT CHAR8* TargetStringSz,
+ IN UINT32 TargetStringSize,
+ IN UINT64 Value
+ )
+{
+ static CHAR8 ItoH[] = { '0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F' };
+ UINT8 StringInx;
+ INT8 NibbleInx;
+
+ ZeroMem((void*)TargetStringSz, TargetStringSize);
+
+ //
+ // Convert each nibble to hex string, starting from
+ // the highest non-zero nibble.
+ //
+ StringInx = 0;
+ for (NibbleInx = sizeof(UINT64) * 2; NibbleInx > 0; --NibbleInx) {
+ UINT64 NibbleMask = (((UINT64)0xF) << ((NibbleInx - 1) * 4));
+ UINT8 Nibble = (UINT8)((Value & NibbleMask) >> ((NibbleInx - 1) * 4));
+
+ ASSERT(Nibble <= 0xF);
+
+ if (StringInx < (TargetStringSize-1)) {
+ TargetStringSz[StringInx++] = ItoH[Nibble];
+ } else {
+ break;
+ }
+ }
+}
+
+VOID
+SysInfoUpdateSmbiosType1 (
+ VOID
+ )
+{
+ UINT32 BoardRevision = 0;
+ EFI_STATUS Status = EFI_SUCCESS;
+ UINT64 BoardSerial = 0;
+ UINTN Prod = PROD_UNKNOWN;
+ UINTN Manu = MANU_UNKNOWN;
+
+ Status = mFwProtocol->GetModelRevision(&BoardRevision);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "Failed to get board model: %r\n",
+ Status));
+ } else {
+ Prod = X(BoardRevision, 4, 11);
+ }
+
+ if (Prod > PROD_KNOWN) {
+ Prod = PROD_UNKNOWN;
+ }
+ Prod -= PROD_BASE;
+ AsciiSPrint(mSysInfoProductName,
+ sizeof(mSysInfoProductName),
+ "64-bit Raspberry Pi %a (rev. %x)",
+ ProductNames[Prod], BoardRevision);
+
+ Manu = X(BoardRevision, 16, 19);
+ if (Manu > MANU_KNOWN) {
+ Manu = MANU_UNKNOWN;
+ } else {
+ Manu += MANU_BASE;
+ }
+ AsciiSPrint(mSysInfoManufName,
+ sizeof(mSysInfoManufName),
+ "%a", ManufNames[Manu]);
+
+ I64ToHexString(mSysInfoSKU,
+ sizeof(mSysInfoSKU),
+ BoardRevision);
+
+ Status = mFwProtocol->GetSerial(&BoardSerial);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "Failed to get board serial: %r\n",
+ Status));
+ }
+
+ I64ToHexString(mSysInfoSerial,
+ sizeof(mSysInfoSerial),
+ BoardSerial);
+
+ DEBUG ((DEBUG_ERROR, "Board Serial Number: %a\n", mSysInfoSerial));
+
+ mSysInfoType1.Uuid.Data1= *(UINT32 *)"RPi3";
+ mSysInfoType1.Uuid.Data2=0x0;
+ mSysInfoType1.Uuid.Data3=0x0;
+ CopyMem(mSysInfoType1.Uuid.Data4,
+ &BoardSerial, sizeof(BoardSerial));
+
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mSysInfoType1, mSysInfoType1Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE2 Board Information
+************************************************************************/
+VOID
+BoardInfoUpdateSmbiosType2 (
+ VOID
+ )
+{
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mBoardInfoType2, mBoardInfoType2Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE3 Enclosure Information
+************************************************************************/
+VOID
+EnclosureInfoUpdateSmbiosType3 (
+ VOID
+ )
+{
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mEnclosureInfoType3, mEnclosureInfoType3Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE4 Processor Information
+************************************************************************/
+VOID
+ProcessorInfoUpdateSmbiosType4 (
+ IN UINTN MaxCpus
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Rate;
+
+ mProcessorInfoType4.CoreCount = (UINT8) MaxCpus;
+ mProcessorInfoType4.EnabledCoreCount = (UINT8) MaxCpus;
+ mProcessorInfoType4.ThreadCount = (UINT8) MaxCpus;
+
+ Status = mFwProtocol->GetMaxClockRate(RPI_FW_CLOCK_RATE_ARM, &Rate);
+ if (Status != EFI_SUCCESS) {
+ DEBUG ((DEBUG_ERROR, "Couldn't get the max CPU speed: %r\n", Status));
+ } else {
+ mProcessorInfoType4.MaxSpeed = Rate / 1000000;
+ DEBUG ((DEBUG_INFO, "Max CPU speed: %uHz\n", Rate));
+ }
+
+ Status = mFwProtocol->GetClockRate(RPI_FW_CLOCK_RATE_ARM, &Rate);
+ if (Status != EFI_SUCCESS) {
+ DEBUG ((DEBUG_ERROR, "Couldn't get the current CPU speed: %r\n", Status));
+ } else {
+ mProcessorInfoType4.CurrentSpeed = Rate / 1000000;
+ DEBUG ((DEBUG_INFO, "Current CPU speed: %uHz\n", Rate));
+ }
+
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mProcessorInfoType4, mProcessorInfoType4Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE7 Cache Information
+************************************************************************/
+VOID
+CacheInfoUpdateSmbiosType7 (
+ VOID
+ )
+{
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mCacheInfoType7, mCacheInfoType7Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE9 System Slot Information
+************************************************************************/
+VOID
+SysSlotInfoUpdateSmbiosType9 (
+ VOID
+ )
+{
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mSysSlotInfoType9, mSysSlotInfoType9Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE16 Physical Memory Array Information
+************************************************************************/
+VOID
+PhyMemArrayInfoUpdateSmbiosType16 (
+ VOID
+ )
+{
+ EFI_SMBIOS_HANDLE MemArraySmbiosHande;
+
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mPhyMemArrayInfoType16, mPhyMemArrayInfoType16Strings, &MemArraySmbiosHande);
+
+ //
+ // Update the memory device information
+ //
+ mMemDevInfoType17.MemoryArrayHandle = MemArraySmbiosHande;
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE17 Memory Device Information
+************************************************************************/
+VOID
+MemDevInfoUpdateSmbiosType17 (
+ VOID
+ )
+{
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mMemDevInfoType17, mMemDevInfoType17Strings, NULL);
+}
+
+/***********************************************************************
+ SMBIOS data update TYPE19 Memory Array Map Information
+************************************************************************/
+VOID
+MemArrMapInfoUpdateSmbiosType19 (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Base;
+ UINT32 Size;
+
+ Status = mFwProtocol->GetArmMem(&Base, &Size);
+ if (Status != EFI_SUCCESS) {
+ DEBUG ((DEBUG_ERROR, "Couldn't get the ARM memory size: %r\n", Status));
+ } else {
+ mMemArrMapInfoType19.StartingAddress = Base / 1024;
+ mMemArrMapInfoType19.EndingAddress = (Base + Size - 1) / 1024;
+ }
+
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mMemArrMapInfoType19, mMemArrMapInfoType19Strings, NULL);
+}
+
+
+/***********************************************************************
+ SMBIOS data update TYPE32 Boot Information
+************************************************************************/
+VOID
+BootInfoUpdateSmbiosType32 (
+ VOID
+ )
+{
+ LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER *)&mBootInfoType32, mBootInfoType32Strings, NULL);
+}
+
+/***********************************************************************
+ Driver Entry
+************************************************************************/
+EFI_STATUS
+EFIAPI
+PlatformSmbiosDriverEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
+ (VOID **)&mFwProtocol);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ BIOSInfoUpdateSmbiosType0();
+
+ SysInfoUpdateSmbiosType1();
+
+ BoardInfoUpdateSmbiosType2();
+
+ EnclosureInfoUpdateSmbiosType3();
+
+ ProcessorInfoUpdateSmbiosType4 (4); //One example for creating and updating
+
+ CacheInfoUpdateSmbiosType7();
+
+ SysSlotInfoUpdateSmbiosType9();
+
+ PhyMemArrayInfoUpdateSmbiosType16();
+
+ MemDevInfoUpdateSmbiosType17();
+
+ MemArrMapInfoUpdateSmbiosType19();
+
+ BootInfoUpdateSmbiosType32();
+
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
new file mode 100644
index 000000000000..ada4c3fc228d
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
@@ -0,0 +1,56 @@
+#/** @file
+#
+# SMBIOS Table for ARM platform
+#
+# Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) Microsoft Corporation. All rights reserved.
+# Copyright (c) 2013 Linaro.org
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PlatformSmbiosDxe
+ FILE_GUID = BAD0554E-22E9-4D83-9AFD-CC87727A1A45
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = PlatformSmbiosDriverEntryPoint
+
+[Sources]
+ PlatformSmbiosDxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ ArmPkg/ArmPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ UefiBootServicesTableLib
+ MemoryAllocationLib
+ BaseMemoryLib
+ BaseLib
+ UefiLib
+ UefiDriverEntryPoint
+ DebugLib
+ PrintLib
+
+[Protocols]
+ gEfiSmbiosProtocolGuid # PROTOCOL SOMETIMES_CONSUMED
+ gRaspberryPiFirmwareProtocolGuid ## CONSUMES
+[Guids]
+
+[Depex]
+ gEfiSmbiosProtocolGuid AND gRaspberryPiFirmwareProtocolGuid
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdSystemMemorySize
diff --git a/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c
new file mode 100644
index 000000000000..f2b0117629fd
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c
@@ -0,0 +1,370 @@
+/** @file
+ *
+ * Copyright (c) 2017, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <libfdt.h>
+
+#include <Protocol/RaspberryPiFirmware.h>
+
+#include <Guid/Fdt.h>
+
+STATIC VOID *mFdtImage;
+
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+
+STATIC
+VOID
+UpdateMacAddress (
+ VOID
+ )
+{
+ INTN Node;
+ INTN Retval;
+ EFI_STATUS Status;
+ UINT8 MacAddress[6];
+
+ //
+ // Locate the node that the 'ethernet' alias refers to
+ //
+ Node = fdt_path_offset(mFdtImage, "ethernet");
+ if (Node < 0) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to locate 'ethernet' alias\n",
+ __FUNCTION__));
+ return;
+ }
+
+ //
+ // Get the MAC address from the firmware
+ //
+ Status = mFwProtocol->GetMacAddress (MacAddress);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to retrieve MAC address\n", __FUNCTION__));
+ return;
+ }
+
+ Retval = fdt_setprop (mFdtImage, Node, "mac-address", MacAddress,
+ sizeof MacAddress);
+ if (Retval != 0) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to create 'mac-address' property (%d)\n",
+ __FUNCTION__, Retval));
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO,
+ "%a: setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
+ __FUNCTION__, MacAddress[0], MacAddress[1], MacAddress[2], MacAddress[3],
+ MacAddress[4], MacAddress[5]));
+}
+
+STATIC
+VOID
+CleanMemoryNodes (
+ VOID
+ )
+{
+ INTN Node;
+ INT32 Retval;
+
+ Node = fdt_path_offset(mFdtImage, "/memory");
+ if (Node < 0) {
+ return;
+ }
+
+ /*
+ * Remove bogus memory nodes which can make the booted
+ * OS go crazy and ignore the UEFI map.
+ */
+ DEBUG ((DEBUG_INFO, "Removing bogus /memory\n"));
+ Retval = fdt_del_node(mFdtImage, Node);
+ if (Retval != 0) {
+ DEBUG ((DEBUG_ERROR, "Failed to remove /memory\n"));
+ }
+}
+
+STATIC
+VOID
+SanitizePSCI (
+ VOID
+ )
+{
+ INTN Node;
+ INTN Root;
+ INT32 Retval;
+
+ Root = fdt_path_offset(mFdtImage, "/");
+ ASSERT (Root >= 0);
+ if (Root < 0) {
+ return;
+ }
+
+ Node = fdt_path_offset(mFdtImage, "/psci");
+ if (Node < 0) {
+ Node = fdt_add_subnode(mFdtImage, Root, "psci");
+ }
+
+ ASSERT (Node >= 0);
+ if (Node < 0) {
+ DEBUG ((DEBUG_ERROR, "Couldn't find/create /psci\n"));
+ return;
+ }
+
+ Retval = fdt_setprop_string(mFdtImage, Node, "compatible",
+ "arm,psci-1.0");
+ if (Retval != 0) {
+ DEBUG ((DEBUG_ERROR, "Couldn't set /psci compatible property\n"));
+ return;
+ }
+
+ Retval = fdt_setprop_string(mFdtImage, Node, "method", "smc");
+ if (Retval != 0) {
+ DEBUG ((DEBUG_ERROR, "Couldn't set /psci method property\n"));
+ return;
+ }
+
+ Root = fdt_path_offset(mFdtImage, "/cpus");
+ if (Root < 0) {
+ DEBUG ((DEBUG_ERROR, "No CPUs to update with PSCI enable-method?\n"));
+ return;
+ }
+
+ Node = fdt_first_subnode(mFdtImage, Root);
+ while (Node >= 0) {
+ if (fdt_setprop_string(mFdtImage, Node, "enable-method", "psci") != 0) {
+ DEBUG ((DEBUG_ERROR, "Failed to update enable-method for a CPU\n"));
+ return;
+ }
+
+ fdt_delprop(mFdtImage, Node, "cpu-release-addr");
+ Node = fdt_next_subnode(mFdtImage, Node);
+ }
+}
+
+STATIC
+VOID
+CleanSimpleFramebuffer (
+ VOID
+ )
+{
+ INTN Node;
+ INT32 Retval;
+
+ /*
+ * Should look for nodes by kind and remove aliases
+ * by matching against device.
+ */
+ Node = fdt_path_offset(mFdtImage, "display0");
+ if (Node < 0) {
+ return;
+ }
+
+ /*
+ * Remove bogus GPU-injected simple-framebuffer, which
+ * doesn't reflect the framebuffer built by UEFI.
+ */
+ DEBUG ((DEBUG_INFO, "Removing bogus display0\n"));
+ Retval = fdt_del_node(mFdtImage, Node);
+ if (Retval != 0) {
+ DEBUG ((DEBUG_ERROR, "Failed to remove display0\n"));
+ return;
+ }
+
+ Node = fdt_path_offset(mFdtImage, "/aliases");
+ if (Node < 0) {
+ DEBUG ((DEBUG_ERROR, "Couldn't find /aliases to remove display0\n"));
+ return;
+ }
+
+ Retval = fdt_delprop(mFdtImage, Node, "display0");
+ if (Retval != 0) {
+ DEBUG ((DEBUG_ERROR, "Failed to remove display0 alias\n"));
+ }
+}
+
+#define MAX_CMDLINE_SIZE 512
+
+STATIC
+VOID
+UpdateBootArgs (
+ VOID
+ )
+{
+ INTN Node;
+ INTN Retval;
+ EFI_STATUS Status;
+ CHAR8 *CommandLine;
+
+ //
+ // Locate the /chosen node
+ //
+ Node = fdt_path_offset(mFdtImage, "/chosen");
+ if (Node < 0) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to locate /chosen node\n",
+ __FUNCTION__));
+ return;
+ }
+
+ //
+ // If /chosen/bootargs already exists, we want to add a space character
+ // before adding the firmware supplied arguments. However, the RpiFirmware
+ // protocol expects a 32-bit aligned buffer. So let's allocate 4 bytes of
+ // slack, and skip the first 3 when passing this buffer into libfdt.
+ //
+ CommandLine = AllocatePool (MAX_CMDLINE_SIZE) + 4;
+ if (!CommandLine) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to allocate memory\n", __FUNCTION__));
+ return;
+ }
+
+ //
+ // Get the command line from the firmware
+ //
+ Status = mFwProtocol->GetCommandLine (MAX_CMDLINE_SIZE, CommandLine + 4);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to retrieve command line\n",
+ __FUNCTION__));
+ return;
+ }
+
+ if (AsciiStrLen (CommandLine + 4) == 0) {
+ DEBUG ((DEBUG_INFO, "%a: empty command line received\n", __FUNCTION__));
+ return;
+ }
+
+ CommandLine[3] = ' ';
+
+ Retval = fdt_appendprop_string (mFdtImage, Node, "bootargs", &CommandLine[3]);
+ if (Retval != 0) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to set /chosen/bootargs property (%d)\n",
+ __FUNCTION__, Retval));
+ }
+
+ DEBUG_CODE_BEGIN ();
+ CONST CHAR8 *Prop;
+ INT32 Length;
+ INT32 Index;
+
+ Node = fdt_path_offset (mFdtImage, "/chosen");
+ ASSERT (Node >= 0);
+
+ Prop = fdt_getprop (mFdtImage, Node, "bootargs", &Length);
+ ASSERT (Prop != NULL);
+
+ DEBUG ((DEBUG_INFO, "Command line set from firmware (length %d):\n'", Length));
+
+ for (Index = 0; Index < Length; Index++, Prop++) {
+ if (*Prop == '\0') {
+ continue;
+ }
+ DEBUG ((DEBUG_INFO, "%c", *Prop));
+ }
+
+ DEBUG ((DEBUG_INFO, "'\n"));
+ DEBUG_CODE_END ();
+
+ FreePool (CommandLine - 4);
+}
+
+
+/**
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+EFIAPI
+RpiFdtDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ VOID *FdtImage;
+ UINTN FdtSize;
+ INT32 Retval;
+ BOOLEAN Internal;
+
+ Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
+ (VOID **)&mFwProtocol);
+ ASSERT_EFI_ERROR (Status);
+
+ Internal = FALSE;
+ FdtImage = (VOID *) (UINTN) PcdGet32(PcdFdtBaseAddress);
+ Retval = fdt_check_header (FdtImage);
+ if (Retval == 0) {
+ /*
+ * Have FDT passed via config.txt.
+ */
+ FdtSize = fdt_totalsize (FdtImage);
+ DEBUG ((DEBUG_INFO, "DTB passed via config.txt of 0x%lx bytes\n", FdtSize));
+ Status = EFI_SUCCESS;
+ } else {
+ Internal = TRUE;
+ DEBUG ((DEBUG_INFO, "No/bad FDT at %p (%a), trying internal DTB...\n",
+ FdtImage, fdt_strerror (Retval)));
+ Status = GetSectionFromAnyFv (&gRaspberryPiFdtFileGuid, EFI_SECTION_RAW, 0,
+ &FdtImage, &FdtSize);
+ if (Status == EFI_SUCCESS) {
+ if (fdt_check_header (FdtImage) != 0) {
+ Status = EFI_INCOMPATIBLE_VERSION;
+ }
+ }
+ }
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to locate device tree: %r\n", Status));
+ return Status;
+ }
+
+ /*
+ * Probably overkill.
+ */
+ FdtSize += EFI_PAGE_SIZE * 2;
+ Status = gBS->AllocatePages (AllocateAnyPages, EfiRuntimeServicesData,
+ EFI_SIZE_TO_PAGES(FdtSize),
+ (EFI_PHYSICAL_ADDRESS *) &mFdtImage);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to allocate new device tree: %r\n", Status));
+ return Status;
+ }
+
+ Retval = fdt_open_into (FdtImage, mFdtImage, FdtSize);
+ ASSERT (Retval == 0);
+
+ SanitizePSCI ();
+ CleanMemoryNodes ();
+ CleanSimpleFramebuffer ();
+ UpdateMacAddress ();
+ if (Internal) {
+ /*
+ * A GPU-provided DTB already has the full command line.
+ */
+ UpdateBootArgs ();
+ }
+
+ DEBUG ((DEBUG_INFO, "Installed FDT is at %p\n", mFdtImage));
+ Status = gBS->InstallConfigurationTable (&gFdtTableGuid, mFdtImage);
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
new file mode 100644
index 000000000000..a79e9ddcdc8a
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
@@ -0,0 +1,53 @@
+#/** @file
+#
+# Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = RpiFdtDxe
+ FILE_GUID = 8505280f-109e-437e-9fe4-1aa09c7074d9
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = RpiFdtDxeInitialize
+
+[Sources]
+ RpiFdtDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ DxeServicesLib
+ FdtLib
+ MemoryAllocationLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Guids]
+ gFdtTableGuid
+ gRaspberryPiFdtFileGuid
+
+[Protocols]
+ gRaspberryPiFirmwareProtocolGuid ## CONSUMES
+
+[Depex]
+ gRaspberryPiFirmwareProtocolGuid
+
+[FixedPcd]
+ gRaspberryPiTokenSpaceGuid.PcdFdtBaseAddress
diff --git a/Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
new file mode 100644
index 000000000000..50f3ed3f1e36
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
@@ -0,0 +1,1085 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <PiDxe.h>
+
+#include <Library/ArmLib.h>
+#include <Library/DmaLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/SynchronizationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/RpiFirmware.h>
+
+#include <Protocol/RaspberryPiFirmware.h>
+
+//
+// The number of statically allocated buffer pages
+//
+#define NUM_PAGES 1
+
+//
+// The number of iterations to perform when waiting for the mailbox
+// status to change
+//
+#define MAX_TRIES 0x100000
+
+STATIC VOID *mDmaBuffer;
+STATIC VOID *mDmaBufferMapping;
+STATIC UINTN mDmaBufferBusAddress;
+
+STATIC SPIN_LOCK mMailboxLock;
+
+STATIC
+BOOLEAN
+DrainMailbox (
+ VOID
+ )
+{
+ INTN Tries;
+ UINT32 Val;
+
+ //
+ // Get rid of stale response data in the mailbox
+ //
+ Tries = 0;
+ do {
+ Val = MmioRead32 (BCM2836_MBOX_BASE_ADDRESS + BCM2836_MBOX_STATUS_OFFSET);
+ if (Val & (1U << BCM2836_MBOX_STATUS_EMPTY)) {
+ return TRUE;
+ }
+ ArmDataSynchronizationBarrier ();
+ MmioRead32 (BCM2836_MBOX_BASE_ADDRESS + BCM2836_MBOX_READ_OFFSET);
+ } while (++Tries < MAX_TRIES);
+
+ return FALSE;
+}
+
+STATIC
+BOOLEAN
+MailboxWaitForStatusCleared (
+ IN UINTN StatusMask
+ )
+{
+ INTN Tries;
+ UINT32 Val;
+
+ //
+ // Get rid of stale response data in the mailbox
+ //
+ Tries = 0;
+ do {
+ Val = MmioRead32 (BCM2836_MBOX_BASE_ADDRESS + BCM2836_MBOX_STATUS_OFFSET);
+ if ((Val & StatusMask) == 0) {
+ return TRUE;
+ }
+ ArmDataSynchronizationBarrier ();
+ } while (++Tries < MAX_TRIES);
+
+ return FALSE;
+}
+
+STATIC
+EFI_STATUS
+MailboxTransaction (
+ IN UINTN Length,
+ IN UINTN Channel,
+ OUT UINT32 *Result
+ )
+{
+ if (Channel >= BCM2836_MBOX_NUM_CHANNELS) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Get rid of stale response data in the mailbox
+ //
+ if (!DrainMailbox ()) {
+ DEBUG ((DEBUG_ERROR, "%a: timeout waiting for mailbox to drain\n",
+ __FUNCTION__));
+ return EFI_TIMEOUT;
+ }
+
+ //
+ // Wait for the 'output register full' bit to become clear
+ //
+ if (!MailboxWaitForStatusCleared (1U << BCM2836_MBOX_STATUS_FULL)) {
+ DEBUG ((DEBUG_ERROR, "%a: timeout waiting for outbox to become empty\n",
+ __FUNCTION__));
+ return EFI_TIMEOUT;
+ }
+
+ ArmDataSynchronizationBarrier ();
+
+ //
+ // Start the mailbox transaction
+ //
+ MmioWrite32 (BCM2836_MBOX_BASE_ADDRESS + BCM2836_MBOX_WRITE_OFFSET,
+ (UINT32)((UINTN)mDmaBufferBusAddress | Channel));
+
+ ArmDataSynchronizationBarrier ();
+
+ //
+ // Wait for the 'input register empty' bit to clear
+ //
+ if (!MailboxWaitForStatusCleared (1U << BCM2836_MBOX_STATUS_EMPTY)) {
+ DEBUG ((DEBUG_ERROR, "%a: timeout waiting for inbox to become full\n",
+ __FUNCTION__));
+ return EFI_TIMEOUT;
+ }
+
+ //
+ // Read back the result
+ //
+ ArmDataSynchronizationBarrier ();
+ *Result = MmioRead32 (BCM2836_MBOX_BASE_ADDRESS + BCM2836_MBOX_READ_OFFSET);
+ ArmDataSynchronizationBarrier ();
+
+ return EFI_SUCCESS;
+}
+
+#pragma pack(1)
+typedef struct {
+ UINT32 BufferSize;
+ UINT32 Response;
+} RPI_FW_BUFFER_HEAD;
+
+typedef struct {
+ UINT32 TagId;
+ UINT32 TagSize;
+ UINT32 TagValueSize;
+} RPI_FW_TAG_HEAD;
+
+typedef struct {
+ UINT32 DeviceId;
+ UINT32 PowerState;
+} RPI_FW_POWER_STATE_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_POWER_STATE_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_SET_POWER_STATE_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareSetPowerState (
+ IN UINT32 DeviceId,
+ IN BOOLEAN PowerState,
+ IN BOOLEAN Wait
+ )
+{
+ RPI_FW_SET_POWER_STATE_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_SET_POWER_STATE;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->TagBody.DeviceId = DeviceId;
+ Cmd->TagBody.PowerState = (PowerState ? RPI_FW_POWER_STATE_ENABLE : 0) |
+ (Wait ? RPI_FW_POWER_STATE_WAIT : 0);
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ if (!EFI_ERROR (Status) &&
+ PowerState ^ (Cmd->TagBody.PowerState & RPI_FW_POWER_STATE_ENABLE)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to %sable power for device %d\n",
+ __FUNCTION__, PowerState ? "en" : "dis", DeviceId));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ return Status;
+}
+
+#pragma pack()
+typedef struct {
+ UINT32 Base;
+ UINT32 Size;
+} RPI_FW_ARM_MEMORY_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_ARM_MEMORY_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_GET_ARM_MEMORY_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetArmMemory (
+ OUT UINT32 *Base,
+ OUT UINT32 *Size
+ )
+{
+ RPI_FW_GET_ARM_MEMORY_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_GET_ARM_MEMSIZE;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ *Base = Cmd->TagBody.Base;
+ *Size = Cmd->TagBody.Size;
+ return EFI_SUCCESS;
+}
+
+#pragma pack()
+typedef struct {
+ UINT8 MacAddress[6];
+ UINT32 Padding;
+} RPI_FW_MAC_ADDR_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_MAC_ADDR_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_GET_MAC_ADDR_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetMacAddress (
+ OUT UINT8 MacAddress[6]
+ )
+{
+ RPI_FW_GET_MAC_ADDR_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_GET_MAC_ADDRESS;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ CopyMem (MacAddress, Cmd->TagBody.MacAddress, sizeof Cmd->TagBody.MacAddress);
+ return EFI_SUCCESS;
+}
+
+#pragma pack()
+typedef struct {
+ UINT64 Serial;
+} RPI_FW_SERIAL_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_SERIAL_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_GET_SERIAL_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetSerial (
+ OUT UINT64 *Serial
+ )
+{
+ RPI_FW_GET_SERIAL_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_GET_BOARD_SERIAL;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ *Serial = Cmd->TagBody.Serial;
+ return EFI_SUCCESS;
+}
+
+#pragma pack()
+typedef struct {
+ UINT32 Model;
+} RPI_FW_MODEL_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_MODEL_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_GET_MODEL_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetModel (
+ OUT UINT32 *Model
+ )
+{
+ RPI_FW_GET_MODEL_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_GET_BOARD_MODEL;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ *Model = Cmd->TagBody.Model;
+ return EFI_SUCCESS;
+}
+
+#pragma pack()
+typedef struct {
+ UINT32 Revision;
+} RPI_FW_MODEL_REVISION_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_MODEL_REVISION_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_GET_MODEL_REVISION_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetModelRevision (
+ OUT UINT32 *Revision
+ )
+{
+ RPI_FW_GET_MODEL_REVISION_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_GET_BOARD_REVISION;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ *Revision = Cmd->TagBody.Revision;
+ return EFI_SUCCESS;
+}
+
+#pragma pack()
+typedef struct {
+ UINT32 Width;
+ UINT32 Height;
+} RPI_FW_FB_SIZE_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_FB_SIZE_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_GET_FB_SIZE_CMD;
+
+typedef struct {
+ UINT32 Depth;
+} RPI_FW_FB_DEPTH_TAG;
+
+typedef struct {
+ UINT32 Pitch;
+} RPI_FW_FB_PITCH_TAG;
+
+typedef struct {
+ UINT32 AlignmentBase;
+ UINT32 Size;
+} RPI_FW_FB_ALLOC_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD FreeFbTag;
+ UINT32 EndTag;
+} RPI_FW_FREE_FB_CMD;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD PhysSizeTag;
+ RPI_FW_FB_SIZE_TAG PhysSize;
+ RPI_FW_TAG_HEAD VirtSizeTag;
+ RPI_FW_FB_SIZE_TAG VirtSize;
+ RPI_FW_TAG_HEAD DepthTag;
+ RPI_FW_FB_DEPTH_TAG Depth;
+ RPI_FW_TAG_HEAD AllocFbTag;
+ RPI_FW_FB_ALLOC_TAG AllocFb;
+ RPI_FW_TAG_HEAD PitchTag;
+ RPI_FW_FB_PITCH_TAG Pitch;
+ UINT32 EndTag;
+} RPI_FW_INIT_FB_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetFbSize (
+ OUT UINT32 *Width,
+ OUT UINT32 *Height
+ )
+{
+ RPI_FW_GET_FB_SIZE_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_GET_FB_GEOMETRY;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ *Width = Cmd->TagBody.Width;
+ *Height = Cmd->TagBody.Height;
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareFreeFb (VOID)
+{
+ RPI_FW_FREE_FB_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+
+ Cmd->FreeFbTag.TagId = RPI_FW_FREE_FB;
+ Cmd->FreeFbTag.TagSize = 0;
+ Cmd->FreeFbTag.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareAllocFb (
+ IN UINT32 Width,
+ IN UINT32 Height,
+ IN UINT32 Depth,
+ OUT EFI_PHYSICAL_ADDRESS *FbBase,
+ OUT UINTN *FbSize,
+ OUT UINTN *Pitch)
+{
+ RPI_FW_INIT_FB_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ ASSERT (FbSize != NULL);
+ ASSERT (FbBase != NULL);
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+
+ Cmd->PhysSizeTag.TagId = RPI_FW_SET_FB_PGEOM;
+ Cmd->PhysSizeTag.TagSize = sizeof Cmd->PhysSize;
+ Cmd->PhysSize.Width = Width;
+ Cmd->PhysSize.Height = Height;
+ Cmd->VirtSizeTag.TagId = RPI_FW_SET_FB_VGEOM;
+ Cmd->VirtSizeTag.TagSize = sizeof Cmd->VirtSize;
+ Cmd->VirtSize.Width = Width;
+ Cmd->VirtSize.Height = Height;
+ Cmd->DepthTag.TagId = RPI_FW_SET_FB_DEPTH;
+ Cmd->DepthTag.TagSize = sizeof Cmd->Depth;
+ Cmd->Depth.Depth = Depth;
+ Cmd->AllocFbTag.TagId = RPI_FW_ALLOC_FB;
+ Cmd->AllocFbTag.TagSize = sizeof Cmd->AllocFb;
+ Cmd->AllocFb.AlignmentBase = 32;
+ Cmd->PitchTag.TagId = RPI_FW_GET_FB_LINELENGTH;
+ Cmd->PitchTag.TagSize = sizeof Cmd->Pitch;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ *Pitch = Cmd->Pitch.Pitch;
+ *FbBase = Cmd->AllocFb.AlignmentBase - BCM2836_DMA_DEVICE_OFFSET;
+ *FbSize = Cmd->AllocFb.Size;
+ return EFI_SUCCESS;
+}
+
+#pragma pack()
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ UINT8 CommandLine[0];
+} RPI_FW_GET_COMMAND_LINE_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetCommmandLine (
+ IN UINTN BufferSize,
+ OUT CHAR8 CommandLine[]
+ )
+{
+ RPI_FW_GET_COMMAND_LINE_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if ((BufferSize % sizeof (UINT32)) != 0) {
+ DEBUG ((DEBUG_ERROR, "%a: BufferSize must be a multiple of 4\n",
+ __FUNCTION__));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (sizeof *Cmd + BufferSize > EFI_PAGES_TO_SIZE (NUM_PAGES)) {
+ DEBUG ((DEBUG_ERROR, "%a: BufferSize exceeds size of DMA buffer\n",
+ __FUNCTION__));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd + BufferSize + sizeof (UINT32));
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd + BufferSize + sizeof (UINT32);
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_GET_COMMAND_LINE;
+ Cmd->TagHead.TagSize = BufferSize;
+ Cmd->TagHead.TagValueSize = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd->TagHead.TagValueSize &= ~RPI_FW_VALUE_SIZE_RESPONSE_MASK;
+ if (Cmd->TagHead.TagValueSize >= BufferSize &&
+ Cmd->CommandLine[Cmd->TagHead.TagValueSize - 1] != '\0') {
+ DEBUG ((DEBUG_ERROR, "%a: insufficient buffer size\n", __FUNCTION__));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ CopyMem (CommandLine, Cmd->CommandLine, Cmd->TagHead.TagValueSize);
+
+ if (CommandLine[Cmd->TagHead.TagValueSize - 1] != '\0') {
+ //
+ // Add a NUL terminator if required.
+ //
+ CommandLine[Cmd->TagHead.TagValueSize] = '\0';
+ }
+
+ return EFI_SUCCESS;
+}
+
+#pragma pack()
+typedef struct {
+ UINT32 ClockId;
+ UINT32 ClockRate;
+ UINT32 SkipTurbo;
+} RPI_FW_SET_CLOCK_RATE_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_SET_CLOCK_RATE_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_SET_CLOCK_RATE_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareSetClockRate (
+ IN UINT32 ClockId,
+ IN UINT32 ClockRate
+ )
+{
+ RPI_FW_SET_CLOCK_RATE_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_SET_CLOCK_RATE,
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->TagBody.ClockId = ClockId;
+ Cmd->TagBody.ClockRate = ClockRate;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+#pragma pack()
+typedef struct {
+ UINT32 ClockId;
+ UINT32 ClockRate;
+} RPI_FW_CLOCK_RATE_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_CLOCK_RATE_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_GET_CLOCK_RATE_CMD;
+#pragma pack()
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetClockRate (
+ IN UINT32 ClockId,
+ IN UINT32 ClockKind,
+ OUT UINT32 *ClockRate
+ )
+{
+ RPI_FW_GET_CLOCK_RATE_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = ClockKind,
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->TagBody.ClockId = ClockId;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ return EFI_DEVICE_ERROR;
+ }
+
+ *ClockRate = Cmd->TagBody.ClockRate;
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetCurrentClockRate (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockRate
+ )
+{
+ return RpiFirmwareGetClockRate(ClockId, RPI_FW_GET_CLOCK_RATE, ClockRate);
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetMaxClockRate (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockRate
+ )
+{
+ return RpiFirmwareGetClockRate(ClockId, RPI_FW_GET_MAX_CLOCK_RATE, ClockRate);
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+RpiFirmwareGetMinClockRate (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockRate
+ )
+{
+ return RpiFirmwareGetClockRate(ClockId, RPI_FW_GET_MIN_CLOCK_RATE, ClockRate);
+}
+
+#pragma pack()
+typedef struct {
+ UINT32 Pin;
+ UINT32 State;
+} RPI_FW_SET_GPIO_TAG;
+
+typedef struct {
+ RPI_FW_BUFFER_HEAD BufferHead;
+ RPI_FW_TAG_HEAD TagHead;
+ RPI_FW_SET_GPIO_TAG TagBody;
+ UINT32 EndTag;
+} RPI_FW_SET_GPIO_CMD;
+#pragma pack()
+
+STATIC
+VOID
+RpiFirmwareLedSet (
+ IN BOOLEAN On
+ )
+{
+ RPI_FW_SET_GPIO_CMD *Cmd;
+ EFI_STATUS Status;
+ UINT32 Result;
+
+ if (!AcquireSpinLockOrFail (&mMailboxLock)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
+ return;
+ }
+
+ Cmd = mDmaBuffer;
+ ZeroMem (Cmd, sizeof *Cmd);
+
+ Cmd->BufferHead.BufferSize = sizeof *Cmd;
+ Cmd->BufferHead.Response = 0;
+ Cmd->TagHead.TagId = RPI_FW_SET_GPIO;
+ Cmd->TagHead.TagSize = sizeof Cmd->TagBody;
+ /*
+ * GPIO_PIN_2 = Activity LED
+ * GPIO_PIN_4 = HDMI Detect (Input / Active Low)
+ * GPIO_PIN_7 = Power LED (Input / Active Low)
+ *
+ * There's also a 128 pin offset.
+ */
+ Cmd->TagBody.Pin = 128 + 2;
+ Cmd->TagBody.State = On;
+ Cmd->TagHead.TagValueSize = 0;
+ Cmd->EndTag = 0;
+
+ Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_FW_MBOX_CHANNEL, &Result);
+
+ ReleaseSpinLock (&mMailboxLock);
+
+ if (EFI_ERROR (Status) ||
+ Cmd->BufferHead.Response != RPI_FW_RESP_SUCCESS) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
+ __FUNCTION__, Status, Cmd->BufferHead.Response));
+ }
+}
+
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = {
+ RpiFirmwareSetPowerState,
+ RpiFirmwareGetMacAddress,
+ RpiFirmwareGetCommmandLine,
+ RpiFirmwareGetCurrentClockRate,
+ RpiFirmwareGetMaxClockRate,
+ RpiFirmwareGetMinClockRate,
+ RpiFirmwareSetClockRate,
+ RpiFirmwareAllocFb,
+ RpiFirmwareFreeFb,
+ RpiFirmwareGetFbSize,
+ RpiFirmwareLedSet,
+ RpiFirmwareGetSerial,
+ RpiFirmwareGetModel,
+ RpiFirmwareGetModelRevision,
+ RpiFirmwareGetArmMemory
+};
+
+/**
+ Initialize the state information for the CPU Architectural Protocol
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+RpiFirmwareDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ UINTN BufferSize;
+
+ //
+ // We only need one of these
+ //
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gRaspberryPiFirmwareProtocolGuid);
+
+ InitializeSpinLock (&mMailboxLock);
+
+ Status = DmaAllocateBuffer (EfiBootServicesData, NUM_PAGES, &mDmaBuffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to allocate DMA buffer (Status == %r)\n",
+ __FUNCTION__));
+ return Status;
+ }
+
+ BufferSize = EFI_PAGES_TO_SIZE (NUM_PAGES);
+ Status = DmaMap (MapOperationBusMasterCommonBuffer, mDmaBuffer, &BufferSize,
+ &mDmaBufferBusAddress, &mDmaBufferMapping);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to map DMA buffer (Status == %r)\n",
+ __FUNCTION__));
+ goto FreeBuffer;
+ }
+
+ //
+ // The channel index is encoded in the low bits of the bus address,
+ // so make sure these are cleared.
+ //
+ ASSERT (!(mDmaBufferBusAddress & (BCM2836_MBOX_NUM_CHANNELS - 1)));
+
+ Status = gBS->InstallProtocolInterface (&ImageHandle,
+ &gRaspberryPiFirmwareProtocolGuid, EFI_NATIVE_INTERFACE,
+ &mRpiFirmwareProtocol);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: failed to install RPI firmware protocol (Status == %r)\n",
+ __FUNCTION__, Status));
+ goto UnmapBuffer;
+ }
+
+ return EFI_SUCCESS;
+
+UnmapBuffer:
+ DmaUnmap (mDmaBufferMapping);
+FreeBuffer:
+ DmaFreeBuffer (NUM_PAGES, mDmaBuffer);
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf
new file mode 100644
index 000000000000..2ab57bbf54f0
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf
@@ -0,0 +1,49 @@
+#/** @file
+#
+# Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = RpiFirmwareDxe
+ FILE_GUID = 6d4628df-49a0-4b67-a325-d5af35c65745
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = RpiFirmwareDxeInitialize
+
+[Sources]
+ RpiFirmwareDxe.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ ArmLib
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ DmaLib
+ IoLib
+ SynchronizationLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiLib
+
+[Protocols]
+ gRaspberryPiFirmwareProtocolGuid ## PRODUCES
+
+[Depex]
+ TRUE
diff --git a/Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.c b/Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.c
new file mode 100644
index 000000000000..7dd76098c8a1
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.c
@@ -0,0 +1,830 @@
+/** @file
+ *
+ * Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Uefi.h>
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DmaLib.h>
+#include <Library/TimerLib.h>
+
+#include <Protocol/EmbeddedExternalDevice.h>
+#include <Protocol/BlockIo.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/PiMmcHost.h>
+#include <Protocol/RaspberryPiFirmware.h>
+
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/RpiFirmware.h>
+#include <IndustryStandard/Bcm2836SdHost.h>
+
+#define SDHOST_BLOCK_BYTE_LENGTH 512
+
+// Driver Timing Parameters
+#define CMD_STALL_AFTER_POLL_US 1
+#define CMD_MIN_POLL_TOTAL_TIME_US 100000 // 100ms
+#define CMD_MAX_POLL_COUNT (CMD_MIN_POLL_TOTAL_TIME_US / CMD_STALL_AFTER_POLL_US)
+#define CMD_MAX_RETRY_COUNT 3
+#define CMD_STALL_AFTER_RETRY_US 20 // 20us
+#define FIFO_MAX_POLL_COUNT 1000000
+#define STALL_TO_STABILIZE_US 10000 // 10ms
+
+#define IDENT_MODE_SD_CLOCK_FREQ_HZ 400000 // 400KHz
+
+// Macros adopted from MmcDxe internal header
+#define SDHOST_R0_READY_FOR_DATA BIT8
+#define SDHOST_R0_CURRENTSTATE(Response) ((Response >> 9) & 0xF)
+
+#define DEBUG_MMCHOST_SD DEBUG_VERBOSE
+#define DEBUG_MMCHOST_SD_INFO DEBUG_INFO
+#define DEBUG_MMCHOST_SD_ERROR DEBUG_ERROR
+
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+
+// Per Physical Layer Simplified Specs
+#ifndef NDEBUG
+STATIC CONST CHAR8* mStrSdState[] = { "idle", "ready", "ident", "stby",
+ "tran", "data", "rcv", "prg", "dis",
+ "ina" };
+STATIC CONST CHAR8 *mFsmState[] = { "identmode", "datamode", "readdata",
+ "writedata", "readwait", "readcrc",
+ "writecrc", "writewait1", "powerdown",
+ "powerup", "writestart1", "writestart2",
+ "genpulses", "writewait2", "?",
+ "startpowdown" };
+#endif /* NDEBUG */
+STATIC UINT32 mLastGoodCmd = MMC_GET_INDX(MMC_CMD0);
+
+STATIC inline BOOLEAN
+IsAppCmd(
+ VOID
+ )
+{
+ return mLastGoodCmd == MMC_CMD55;
+}
+
+STATIC BOOLEAN
+IsBusyCmd(
+ IN UINT32 MmcCmd
+ )
+{
+ if (IsAppCmd()) {
+ return FALSE;
+ }
+
+ return MmcCmd == MMC_CMD7 || MmcCmd == MMC_CMD12;
+}
+
+STATIC BOOLEAN
+IsWriteCmd(
+ IN UINT32 MmcCmd
+ )
+{
+ if (IsAppCmd()) {
+ return FALSE;
+ }
+
+ return MmcCmd == MMC_CMD24 || MmcCmd == MMC_CMD25;
+}
+
+STATIC BOOLEAN
+IsReadCmd(
+ IN UINT32 MmcCmd,
+ IN UINT32 Argument
+ )
+{
+ if (MmcCmd == MMC_CMD8 && !IsAppCmd()) {
+ if (Argument == CMD8_MMC_ARG) {
+ DEBUG((DEBUG_MMCHOST_SD, "Sending MMC CMD8 variant\n"));
+ return TRUE;
+ } else {
+ ASSERT (Argument == CMD8_SD_ARG);
+ DEBUG((DEBUG_MMCHOST_SD, "Sending SD CMD8 variant\n"));
+ return FALSE;
+ }
+ }
+
+ return
+ (MmcCmd == MMC_CMD6 && !IsAppCmd()) ||
+ (MmcCmd == MMC_CMD17 && !IsAppCmd()) ||
+ (MmcCmd == MMC_CMD18 && !IsAppCmd()) ||
+ (MmcCmd == MMC_CMD13 && IsAppCmd()) ||
+ (MmcCmd == MMC_ACMD22 && IsAppCmd()) ||
+ (MmcCmd == MMC_ACMD51 && IsAppCmd());
+}
+
+STATIC VOID
+SdHostDumpRegisters(
+ VOID
+ )
+{
+ DEBUG((DEBUG_MMCHOST_SD, "SdHost: Registers Dump:\n"));
+ DEBUG((DEBUG_MMCHOST_SD, " CMD: 0x%8.8X\n", MmioRead32(SDHOST_CMD)));
+ DEBUG((DEBUG_MMCHOST_SD, " ARG: 0x%8.8X\n", MmioRead32(SDHOST_ARG)));
+ DEBUG((DEBUG_MMCHOST_SD, " TOUT: 0x%8.8X\n", MmioRead32(SDHOST_TOUT)));
+ DEBUG((DEBUG_MMCHOST_SD, " CDIV: 0x%8.8X\n", MmioRead32(SDHOST_CDIV)));
+ DEBUG((DEBUG_MMCHOST_SD, " RSP0: 0x%8.8X\n", MmioRead32(SDHOST_RSP0)));
+ DEBUG((DEBUG_MMCHOST_SD, " RSP1: 0x%8.8X\n", MmioRead32(SDHOST_RSP1)));
+ DEBUG((DEBUG_MMCHOST_SD, " RSP2: 0x%8.8X\n", MmioRead32(SDHOST_RSP2)));
+ DEBUG((DEBUG_MMCHOST_SD, " RSP3: 0x%8.8X\n", MmioRead32(SDHOST_RSP3)));
+ DEBUG((DEBUG_MMCHOST_SD, " HSTS: 0x%8.8X\n", MmioRead32(SDHOST_HSTS)));
+ DEBUG((DEBUG_MMCHOST_SD, " VDD: 0x%8.8X\n", MmioRead32(SDHOST_VDD)));
+ DEBUG((DEBUG_MMCHOST_SD, " EDM: 0x%8.8X\n", MmioRead32(SDHOST_EDM)));
+ DEBUG((DEBUG_MMCHOST_SD, " HCFG: 0x%8.8X\n", MmioRead32(SDHOST_HCFG)));
+ DEBUG((DEBUG_MMCHOST_SD, " HBCT: 0x%8.8X\n", MmioRead32(SDHOST_HBCT)));
+ DEBUG((DEBUG_MMCHOST_SD, " HBLC: 0x%8.8X\n\n", MmioRead32(SDHOST_HBLC)));
+}
+
+#ifndef NDEBUG
+STATIC EFI_STATUS
+SdHostGetSdStatus(
+ UINT32* SdStatus
+ )
+{
+ ASSERT(SdStatus != NULL);
+
+ // On command completion with R1 or R1b response type
+ // the SDCard status will be in RSP0
+ UINT32 Rsp0 = MmioRead32(SDHOST_RSP0);
+ if (Rsp0 != 0xFFFFFFFF) {
+ *SdStatus = Rsp0;
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NO_RESPONSE;
+}
+#endif /* NDEBUG */
+
+STATIC VOID
+SdHostDumpSdCardStatus(
+ VOID
+ )
+{
+#ifndef NDEBUG
+ UINT32 SdCardStatus;
+ EFI_STATUS Status = SdHostGetSdStatus(&SdCardStatus);
+ if (!EFI_ERROR(Status)) {
+ UINT32 CurrState = SDHOST_R0_CURRENTSTATE(SdCardStatus);
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "SdHost: SdCardStatus 0x%8.8X: ReadyForData?%d, State[%d]: %a\n",
+ SdCardStatus,
+ ((SdCardStatus & SDHOST_R0_READY_FOR_DATA) ? 1 : 0),
+ CurrState,
+ ((CurrState < (sizeof(mStrSdState) / sizeof(*mStrSdState))) ?
+ mStrSdState[CurrState] : "UNDEF")));
+ }
+#endif /* NDEBUG */
+}
+
+STATIC VOID
+SdHostDumpStatus(
+ VOID
+ )
+{
+ SdHostDumpRegisters();
+
+#ifndef NDEBUG
+ UINT32 Hsts = MmioRead32(SDHOST_HSTS);
+
+ if (Hsts & SDHOST_HSTS_ERROR) {
+ DEBUG((DEBUG_MMCHOST_SD_ERROR,
+ "SdHost: Diagnose HSTS: 0x%8.8X\n", Hsts));
+
+ DEBUG((DEBUG_MMCHOST_SD_ERROR, "SdHost: Last Good CMD = %u\n",
+ MMC_GET_INDX(mLastGoodCmd)));
+ if (Hsts & SDHOST_HSTS_FIFO_ERROR)
+ DEBUG((DEBUG_MMCHOST_SD_ERROR, " - Fifo Error\n"));
+ if (Hsts & SDHOST_HSTS_CRC7_ERROR)
+ DEBUG((DEBUG_MMCHOST_SD_ERROR, " - CRC7 Error\n"));
+ if (Hsts & SDHOST_HSTS_CRC16_ERROR)
+ DEBUG((DEBUG_MMCHOST_SD_ERROR, " - CRC16 Error\n"));
+ if (Hsts & SDHOST_HSTS_CMD_TIME_OUT)
+ DEBUG((DEBUG_MMCHOST_SD_ERROR, " - CMD Timeout (TOUT %x)\n",
+ MmioRead32(SDHOST_TOUT)));
+ if (Hsts & SDHOST_HSTS_REW_TIME_OUT)
+ DEBUG((DEBUG_MMCHOST_SD_ERROR, " - Read/Erase/Write Transfer Timeout\n"));
+ }
+
+ UINT32 Edm = MmioRead32(SDHOST_EDM);
+ DEBUG(((Hsts & SDHOST_HSTS_ERROR) ?
+ DEBUG_MMCHOST_SD_ERROR : DEBUG_MMCHOST_SD,
+ "SdHost: Diagnose EDM: 0x%8.8X\n", Edm));
+ DEBUG(((Hsts & SDHOST_HSTS_ERROR) ?
+ DEBUG_MMCHOST_SD_ERROR : DEBUG_MMCHOST_SD,
+ " - FSM: 0x%x (%a)\n", (Edm & 0xF), mFsmState[Edm & 0xF]));
+ DEBUG(((Hsts & SDHOST_HSTS_ERROR) ?
+ DEBUG_MMCHOST_SD_ERROR : DEBUG_MMCHOST_SD,
+ " - Fifo Count: %d\n", ((Edm >> 4) & 0x1F)));
+ DEBUG(((Hsts & SDHOST_HSTS_ERROR) ?
+ DEBUG_MMCHOST_SD_ERROR : DEBUG_MMCHOST_SD,
+ " - Fifo Write Threshold: %d\n",
+ ((Edm >> SDHOST_EDM_WRITE_THRESHOLD_SHIFT) &
+ SDHOST_EDM_THRESHOLD_MASK)));
+ DEBUG(((Hsts & SDHOST_HSTS_ERROR) ?
+ DEBUG_MMCHOST_SD_ERROR : DEBUG_MMCHOST_SD,
+ " - Fifo Read Threshold: %d\n",
+ ((Edm >> SDHOST_EDM_READ_THRESHOLD_SHIFT) & SDHOST_EDM_THRESHOLD_MASK)));
+#endif
+
+ SdHostDumpSdCardStatus();
+}
+
+STATIC EFI_STATUS
+SdHostSetClockFrequency(
+ IN UINTN TargetSdFreqHz
+ )
+{
+ EFI_STATUS Status;
+ UINT32 CoreClockFreqHz = 0;
+
+ // First figure out the core clock
+ Status = mFwProtocol->GetClockRate(RPI_FW_CLOCK_RATE_CORE, &CoreClockFreqHz);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ ASSERT (CoreClockFreqHz != 0);
+
+ // fSDCLK = fcore_pclk/(ClockDiv+2)
+ UINT32 ClockDiv = (CoreClockFreqHz - (2 * TargetSdFreqHz)) / TargetSdFreqHz;
+ UINT32 ActualSdFreqHz = CoreClockFreqHz / (ClockDiv + 2);
+
+ DEBUG((
+ DEBUG_MMCHOST_SD_INFO,
+ "SdHost: CoreClock=%dHz, CDIV=%d, Requested SdClock=%dHz, Actual SdClock=%dHz\n",
+ CoreClockFreqHz,
+ ClockDiv,
+ TargetSdFreqHz,
+ ActualSdFreqHz));
+
+ MmioWrite32(SDHOST_CDIV, ClockDiv);
+ // Set timeout after 1 second, i.e ActualSdFreqHz SD clock cycles
+ MmioWrite32(SDHOST_TOUT, ActualSdFreqHz);
+
+ gBS->Stall(STALL_TO_STABILIZE_US);
+
+ return Status;
+}
+
+STATIC BOOLEAN
+SdIsCardPresent(
+ IN EFI_MMC_HOST_PROTOCOL *This
+ )
+{
+ return TRUE;
+}
+
+STATIC BOOLEAN
+SdIsReadOnly(
+ IN EFI_MMC_HOST_PROTOCOL *This
+ )
+{
+ return FALSE;
+}
+
+STATIC EFI_STATUS
+SdBuildDevicePath(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ EFI_DEVICE_PATH_PROTOCOL *NewDevicePathNode;
+ EFI_GUID DevicePathGuid = EFI_CALLER_ID_GUID;
+
+ DEBUG((DEBUG_MMCHOST_SD, "SdHost: SdBuildDevicePath()\n"));
+
+ NewDevicePathNode = CreateDeviceNode(HARDWARE_DEVICE_PATH, HW_VENDOR_DP, sizeof(VENDOR_DEVICE_PATH));
+ CopyGuid(&((VENDOR_DEVICE_PATH*)NewDevicePathNode)->Guid, &DevicePathGuid);
+ *DevicePath = NewDevicePathNode;
+
+ return EFI_SUCCESS;
+}
+
+STATIC EFI_STATUS
+SdSendCommand(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_CMD MmcCmd,
+ IN UINT32 Argument
+ )
+{
+ UINT32 Hsts;
+
+ //
+ // Fail fast, CMD5 (CMD_IO_SEND_OP_COND)
+ // is only valid for SDIO cards and thus
+ // expected to always fail.
+ //
+ if (MmcCmd == MMC_CMD5) {
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "SdHost: SdSendCommand(CMD%d, Argument: %08x) ignored\n",
+ MMC_GET_INDX(MmcCmd),
+ Argument));
+ return EFI_UNSUPPORTED;
+ }
+
+ if (MmioRead32(SDHOST_CMD) & SDHOST_CMD_NEW_FLAG) {
+ DEBUG((
+ DEBUG_MMCHOST_SD_ERROR,
+ "SdHost: SdSendCommand(): Failed to execute CMD%d, a CMD is already being executed.\n",
+ MMC_GET_INDX(MmcCmd)));
+ SdHostDumpStatus();
+ return EFI_DEVICE_ERROR;
+ }
+
+ // Write command argument
+ MmioWrite32(SDHOST_ARG, Argument);
+
+ UINT32 SdCmd = 0;
+ {
+ // Set response type
+ if (MmcCmd & MMC_CMD_WAIT_RESPONSE) {
+ if (MmcCmd & MMC_CMD_LONG_RESPONSE) {
+ SdCmd |= SDHOST_CMD_RESPONSE_CMD_LONG_RESP;
+ }
+ } else {
+ SdCmd |= SDHOST_CMD_RESPONSE_CMD_NO_RESP;
+ }
+
+ if (IsBusyCmd(MmcCmd)) {
+ SdCmd |= SDHOST_CMD_BUSY_CMD;
+ }
+
+ if (IsReadCmd(MmcCmd, Argument)) {
+ SdCmd |= SDHOST_CMD_READ_CMD;
+ }
+
+ if (IsWriteCmd(MmcCmd)) {
+ SdCmd |= SDHOST_CMD_WRITE_CMD;
+ }
+
+ SdCmd |= MMC_GET_INDX(MmcCmd);
+ }
+
+ if (IsReadCmd(MmcCmd, Argument) || IsWriteCmd(MmcCmd)) {
+ if (IsAppCmd() && MmcCmd == MMC_ACMD22) {
+ MmioWrite32(SDHOST_HBCT, 0x4);
+ } else if (IsAppCmd() && MmcCmd == MMC_ACMD51) {
+ MmioWrite32(SDHOST_HBCT, 0x8);
+ } else if (!IsAppCmd() && MmcCmd == MMC_CMD6) {
+ MmioWrite32(SDHOST_HBCT, 0x40);
+ } else {
+ MmioWrite32(SDHOST_HBCT, SDHOST_BLOCK_BYTE_LENGTH);
+ }
+ }
+
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "SdHost: SdSendCommand(CMD%d, Argument: %08x): BUSY=%d, RESP=%d, WRITE=%d, READ=%d\n",
+ MMC_GET_INDX(MmcCmd),
+ Argument,
+ ((SdCmd & SDHOST_CMD_BUSY_CMD) ? 1 : 0),
+ ((SdCmd & (SDHOST_CMD_RESPONSE_CMD_LONG_RESP | SDHOST_CMD_RESPONSE_CMD_NO_RESP)) >> 9),
+ ((SdCmd & SDHOST_CMD_WRITE_CMD) ? 1 : 0),
+ ((SdCmd & SDHOST_CMD_READ_CMD) ? 1 : 0)));
+
+ UINT32 PollCount = 0;
+ UINT32 RetryCount = 0;
+ BOOLEAN IsCmdExecuted = FALSE;
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ // Keep retrying the command until it succeeds.
+ while ((RetryCount < CMD_MAX_RETRY_COUNT) && !IsCmdExecuted) {
+ Status = EFI_SUCCESS;
+
+ // Clear prev cmd status
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_CLEAR);
+
+ if (IsReadCmd(MmcCmd, Argument) || IsWriteCmd(MmcCmd)) {
+ // Flush Fifo if this cmd will start a new transfer in case
+ // there is stale bytes in the Fifo
+ MmioOr32(SDHOST_EDM, SDHOST_EDM_FIFO_CLEAR);
+ }
+
+ if (MmioRead32(SDHOST_CMD) & SDHOST_CMD_NEW_FLAG) {
+ DEBUG((
+ DEBUG_MMCHOST_SD_ERROR,
+ "%a(%u): CMD%d is still being executed after %d trial(s)\n",
+ __FUNCTION__, __LINE__, MMC_GET_INDX(MmcCmd), RetryCount));
+ }
+
+ // Write command and set it to start execution
+ MmioWrite32(SDHOST_CMD, SDHOST_CMD_NEW_FLAG | SdCmd);
+
+ // Poll for the command status until it finishes execution
+ while (PollCount < CMD_MAX_POLL_COUNT) {
+ UINT32 CmdReg = MmioRead32(SDHOST_CMD);
+
+ // Read status of command response
+ if (CmdReg & SDHOST_CMD_FAIL_FLAG) {
+ Status = EFI_DEVICE_ERROR;
+ /*
+ * Must fall-through and wait for the command completion!
+ */
+ }
+
+ // Check if command is completed.
+ if (!(CmdReg & SDHOST_CMD_NEW_FLAG)) {
+ IsCmdExecuted = TRUE;
+ break;
+ }
+
+ ++PollCount;
+ gBS->Stall(CMD_STALL_AFTER_POLL_US);
+ }
+
+ if (!IsCmdExecuted) {
+ ++RetryCount;
+ gBS->Stall(CMD_STALL_AFTER_RETRY_US);
+ }
+ }
+
+ if (RetryCount == CMD_MAX_RETRY_COUNT) {
+ Status = EFI_TIMEOUT;
+ }
+
+ Hsts = MmioRead32(SDHOST_HSTS);
+ if (EFI_ERROR(Status) ||
+ (Hsts & SDHOST_HSTS_ERROR) != 0) {
+ if (MmcCmd == MMC_CMD1 &&
+ (Hsts & SDHOST_HSTS_CRC7_ERROR) != 0) {
+ /*
+ * SdHost seems to have no way to specify
+ * R3 as a transfer type.
+ */
+ IsCmdExecuted = TRUE;
+ Status = EFI_SUCCESS;
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_CLEAR);
+ } else if (MmcCmd == MMC_CMD7 && Argument == 0) {
+ /*
+ * Deselecting the SDCard with CMD7 and RCA=0x0
+ * always timeout on SDHost.
+ */
+ Status = EFI_SUCCESS;
+ } else {
+ DEBUG((
+ DEBUG_MMCHOST_SD_ERROR,
+ "%a(%u): CMD%d execution failed after %d trial(s)\n",
+ __FUNCTION__, __LINE__,
+ MMC_GET_INDX(MmcCmd),
+ RetryCount));
+ SdHostDumpStatus();
+ }
+
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_CLEAR);
+ }
+
+ if (IsCmdExecuted && !EFI_ERROR(Status)) {
+ ASSERT(!(MmioRead32(SDHOST_HSTS) & SDHOST_HSTS_ERROR));
+ mLastGoodCmd = MmcCmd;
+ }
+
+ return Status;
+}
+
+STATIC EFI_STATUS
+SdReceiveResponse(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_RESPONSE_TYPE Type,
+ IN UINT32* Buffer
+ )
+{
+ if (Buffer == NULL) {
+ DEBUG((DEBUG_MMCHOST_SD_ERROR,
+ "SdHost: SdReceiveResponse(): Input Buffer is NULL\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Type == MMC_RESPONSE_TYPE_R1) ||
+ (Type == MMC_RESPONSE_TYPE_R1b) ||
+ (Type == MMC_RESPONSE_TYPE_R3) ||
+ (Type == MMC_RESPONSE_TYPE_R6) ||
+ (Type == MMC_RESPONSE_TYPE_R7)) {
+ Buffer[0] = MmioRead32(SDHOST_RSP0);
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "SdHost: SdReceiveResponse(Type: %x), Buffer[0]: %08x\n",
+ Type, Buffer[0]));
+
+ } else if (Type == MMC_RESPONSE_TYPE_R2) {
+ Buffer[0] = MmioRead32(SDHOST_RSP0);
+ Buffer[1] = MmioRead32(SDHOST_RSP1);
+ Buffer[2] = MmioRead32(SDHOST_RSP2);
+ Buffer[3] = MmioRead32(SDHOST_RSP3);
+
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "SdHost: SdReceiveResponse(Type: %x), Buffer[0-3]: %08x, %08x, %08x, %08x\n",
+ Type, Buffer[0], Buffer[1], Buffer[2], Buffer[3]));
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC EFI_STATUS
+SdReadBlockData(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Length,
+ IN UINT32* Buffer
+ )
+{
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "SdHost: SdReadBlockData(LBA: 0x%x, Length: 0x%x, Buffer: 0x%x)\n",
+ (UINT32)Lba, Length, Buffer));
+
+ ASSERT(Buffer != NULL);
+ ASSERT(Length % 4 == 0);
+
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ mFwProtocol->SetLed(TRUE);
+ {
+ UINT32 NumWords = Length / 4;
+ UINT32 WordIdx;
+
+ for (WordIdx = 0; WordIdx < NumWords; ++WordIdx) {
+ UINT32 PollCount = 0;
+ while (PollCount < FIFO_MAX_POLL_COUNT) {
+ UINT32 Hsts = MmioRead32(SDHOST_HSTS);
+ if ((Hsts & SDHOST_HSTS_DATA_FLAG) != 0) {
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_DATA_FLAG);
+ Buffer[WordIdx] = MmioRead32(SDHOST_DATA);
+ break;
+ }
+
+ ++PollCount;
+ gBS->Stall(CMD_STALL_AFTER_RETRY_US);
+ }
+
+ if (PollCount == FIFO_MAX_POLL_COUNT) {
+ DEBUG(
+ (DEBUG_MMCHOST_SD_ERROR,
+ "SdHost: SdReadBlockData(): Block Word%d read poll timed-out\n",
+ WordIdx));
+ SdHostDumpStatus();
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_CLEAR);
+ Status = EFI_TIMEOUT;
+ break;
+ }
+ }
+ }
+ mFwProtocol->SetLed(FALSE);
+
+ return Status;
+}
+
+STATIC EFI_STATUS
+SdWriteBlockData(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Length,
+ IN UINT32* Buffer
+ )
+{
+ DEBUG((
+ DEBUG_MMCHOST_SD,
+ "SdHost: SdWriteBlockData(LBA: 0x%x, Length: 0x%x, Buffer: 0x%x)\n",
+ (UINT32)Lba, Length, Buffer));
+
+ ASSERT(Buffer != NULL);
+ ASSERT(Length % SDHOST_BLOCK_BYTE_LENGTH == 0);
+
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ mFwProtocol->SetLed(TRUE);
+ {
+ UINT32 NumWords = Length / 4;
+ UINT32 WordIdx;
+
+ for (WordIdx = 0; WordIdx < NumWords; ++WordIdx) {
+ UINT32 PollCount = 0;
+ while (PollCount < FIFO_MAX_POLL_COUNT) {
+ if (MmioRead32(SDHOST_HSTS) & SDHOST_HSTS_DATA_FLAG) {
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_DATA_FLAG);
+ MmioWrite32(SDHOST_DATA, Buffer[WordIdx]);
+ break;
+ }
+
+ ++PollCount;
+ gBS->Stall(CMD_STALL_AFTER_RETRY_US);
+ }
+
+ if (PollCount == FIFO_MAX_POLL_COUNT) {
+ DEBUG((
+ DEBUG_MMCHOST_SD_ERROR,
+ "SdHost: SdWriteBlockData(): Block Word%d write poll timed-out\n",
+ WordIdx));
+ SdHostDumpStatus();
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_CLEAR);
+ Status = EFI_TIMEOUT;
+ break;
+ }
+ }
+ }
+ mFwProtocol->SetLed(FALSE);
+
+ return Status;
+}
+
+STATIC EFI_STATUS
+SdSetIos (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN UINT32 BusClockFreq,
+ IN UINT32 BusWidth,
+ IN UINT32 TimingMode
+ )
+{
+ if (BusWidth != 0) {
+ UINT32 Hcfg = MmioRead32(SDHOST_HCFG);
+
+ DEBUG((DEBUG_MMCHOST_SD_INFO, "Setting BusWidth %u\n", BusWidth));
+ if (BusWidth == 4) {
+ Hcfg |= SDHOST_HCFG_WIDE_EXT_BUS;
+ } else {
+ Hcfg &= ~SDHOST_HCFG_WIDE_EXT_BUS;
+ }
+
+ Hcfg |= SDHOST_HCFG_WIDE_INT_BUS | SDHOST_HCFG_SLOW_CARD;
+ MmioWrite32(SDHOST_HCFG, Hcfg);
+ }
+
+ if (BusClockFreq != 0) {
+ DEBUG((DEBUG_MMCHOST_SD_INFO, "Setting Freq %u Hz\n", BusClockFreq));
+ SdHostSetClockFrequency(BusClockFreq);
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC EFI_STATUS
+SdNotifyState(
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_STATE State
+ )
+{
+ DEBUG((DEBUG_MMCHOST_SD, "SdHost: SdNotifyState(State: %d) ", State));
+
+ switch (State) {
+ case MmcHwInitializationState:
+ {
+ DEBUG((DEBUG_MMCHOST_SD, "MmcHwInitializationState\n", State));
+
+ // Turn-off SD Card power
+ MmioWrite32(SDHOST_VDD, 0);
+ {
+ // Reset command and arg
+ MmioWrite32(SDHOST_CMD, 0);
+ MmioWrite32(SDHOST_ARG, 0);
+ // Reset clock divider
+ MmioWrite32(SDHOST_CDIV, 0);
+ // Default timeout
+ MmioWrite32(SDHOST_TOUT, 0xffffffff);
+ // Clear status flags
+ MmioWrite32(SDHOST_HSTS, SDHOST_HSTS_CLEAR);;
+ // Reset controller configs
+ MmioWrite32(SDHOST_HCFG, 0);
+ MmioWrite32(SDHOST_HBCT, 0);
+ MmioWrite32(SDHOST_HBLC, 0);
+
+ gBS->Stall(STALL_TO_STABILIZE_US);
+ }
+ // Turn-on SD Card power
+ MmioWrite32(SDHOST_VDD, 1);
+
+ gBS->Stall(STALL_TO_STABILIZE_US);
+
+ // Write controller configs
+ UINT32 Hcfg = 0;
+ Hcfg |= SDHOST_HCFG_WIDE_INT_BUS;
+ Hcfg |= SDHOST_HCFG_SLOW_CARD; // Use all bits of CDIV in DataMode
+ MmioWrite32(SDHOST_HCFG, Hcfg);
+
+ // Set default clock frequency
+ EFI_STATUS Status = SdHostSetClockFrequency(IDENT_MODE_SD_CLOCK_FREQ_HZ);
+ if (EFI_ERROR(Status)) {
+ DEBUG((
+ DEBUG_MMCHOST_SD_ERROR,
+ "SdHost: SdNotifyState(): Fail to initialize SD clock to %dHz\n",
+ IDENT_MODE_SD_CLOCK_FREQ_HZ));
+ SdHostDumpStatus();
+ return Status;
+ }
+ }
+ break;
+ case MmcIdleState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcIdleState\n", State));
+ break;
+ case MmcReadyState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcReadyState\n", State));
+ break;
+ case MmcIdentificationState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcIdentificationState\n", State));
+ break;
+ case MmcStandByState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcStandByState\n", State));
+ break;
+ case MmcTransferState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcTransferState\n", State));
+ break;
+ break;
+ case MmcSendingDataState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcSendingDataState\n", State));
+ break;
+ case MmcReceiveDataState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcReceiveDataState\n", State));
+ break;
+ case MmcProgrammingState:
+ DEBUG((DEBUG_MMCHOST_SD, "MmcProgrammingState\n", State));
+ break;
+ case MmcDisconnectState:
+ case MmcInvalidState:
+ default:
+ DEBUG((DEBUG_MMCHOST_SD_ERROR,
+ "SdHost: SdNotifyState(): Invalid State: %d\n", State));
+ ASSERT(0);
+ }
+
+ return EFI_SUCCESS;
+}
+
+BOOLEAN
+SdIsMultiBlock (
+ IN EFI_MMC_HOST_PROTOCOL *This
+ )
+{
+ return TRUE;
+}
+
+EFI_MMC_HOST_PROTOCOL gMmcHost =
+ {
+ MMC_HOST_PROTOCOL_REVISION,
+ SdIsCardPresent,
+ SdIsReadOnly,
+ SdBuildDevicePath,
+ SdNotifyState,
+ SdSendCommand,
+ SdReceiveResponse,
+ SdReadBlockData,
+ SdWriteBlockData,
+ SdSetIos,
+ SdIsMultiBlock
+ };
+
+EFI_STATUS
+SdHostInitialize(
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle = NULL;
+
+ if (PcdGet32 (PcdSdIsArasan)) {
+ DEBUG((DEBUG_INFO, "SD is not routed to SdHost\n"));
+ return EFI_REQUEST_UNLOAD_IMAGE;
+ }
+
+ Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
+ (VOID **)&mFwProtocol);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ DEBUG((DEBUG_MMCHOST_SD, "SdHost: Initialize\n"));
+ DEBUG((DEBUG_MMCHOST_SD, "Config:\n"));
+ DEBUG((DEBUG_MMCHOST_SD, " - FIFO_MAX_POLL_COUNT=%d\n", FIFO_MAX_POLL_COUNT));
+ DEBUG((DEBUG_MMCHOST_SD, " - CMD_STALL_AFTER_POLL_US=%dus\n", CMD_STALL_AFTER_POLL_US));
+ DEBUG((DEBUG_MMCHOST_SD, " - CMD_MIN_POLL_TOTAL_TIME_US=%dms\n", CMD_MIN_POLL_TOTAL_TIME_US / 1000));
+ DEBUG((DEBUG_MMCHOST_SD, " - CMD_MAX_POLL_COUNT=%d\n", CMD_MAX_POLL_COUNT));
+ DEBUG((DEBUG_MMCHOST_SD, " - CMD_MAX_RETRY_COUNT=%d\n", CMD_MAX_RETRY_COUNT));
+ DEBUG((DEBUG_MMCHOST_SD, " - CMD_STALL_AFTER_RETRY_US=%dus\n", CMD_STALL_AFTER_RETRY_US));
+
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gRaspberryPiMmcHostProtocolGuid, &gMmcHost,
+ NULL
+ );
+ ASSERT_EFI_ERROR(Status);
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf
new file mode 100644
index 000000000000..3469b4611cc9
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf
@@ -0,0 +1,54 @@
+#/** @file
+#
+# Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) Microsoft Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SdHost
+ FILE_GUID = 58ABD787-F64D-4CA2-A034-B9AC2D5AD0CF
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = SdHostInitialize
+
+
+[Sources.common]
+ SdHostDxe.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ PcdLib
+ UefiLib
+ UefiDriverEntryPoint
+ MemoryAllocationLib
+ IoLib
+ DmaLib
+ CacheMaintenanceLib
+
+[Guids]
+
+[Protocols]
+ gRaspberryPiMmcHostProtocolGuid ## PRODUCES
+ gRaspberryPiFirmwareProtocolGuid ## CONSUMES
+
+[Pcd]
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan
+
+[Depex]
+ gRaspberryPiFirmwareProtocolGuid AND gRaspberryPiConfigAppliedProtocolGuid
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c
new file mode 100644
index 000000000000..961de586c78b
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c
@@ -0,0 +1,196 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2007-2009, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "VarBlockService.h"
+
+
+EFI_STATUS
+FileWrite (
+ IN EFI_FILE_PROTOCOL *File,
+ IN UINTN Offset,
+ IN UINTN Buffer,
+ IN UINTN Size
+ )
+{
+ EFI_STATUS Status;
+
+ Status = File->SetPosition (File, Offset);
+ ASSERT_EFI_ERROR (Status);
+ if (!EFI_ERROR (Status)) {
+ Status = File->Write (File, &Size, (VOID *) Buffer);
+ ASSERT_EFI_ERROR (Status);
+ }
+ return Status;
+}
+
+
+VOID
+FileClose (
+ IN EFI_FILE_PROTOCOL *File
+ )
+{
+ File->Flush (File);
+ File->Close (File);
+}
+
+
+EFI_STATUS
+FileOpen (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device,
+ IN CHAR16 *MappedFile,
+ OUT EFI_FILE_PROTOCOL **File,
+ IN UINT64 OpenMode
+ )
+{
+ EFI_HANDLE Handle;
+ EFI_FILE_HANDLE Root;
+ EFI_SIMPLE_FILE_SYSTEM_PROTOCOL *Volume;
+ EFI_STATUS Status;
+
+ *File = NULL;
+
+ Status = gBS->LocateDevicePath (
+ &gEfiSimpleFileSystemProtocolGuid,
+ &Device,
+ &Handle
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->HandleProtocol (
+ Handle,
+ &gEfiSimpleFileSystemProtocolGuid,
+ (void **) &Volume
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Open the root directory of the volume
+ //
+ Root = NULL;
+ Status = Volume->OpenVolume (
+ Volume,
+ &Root
+ );
+ ASSERT_EFI_ERROR (Status);
+ ASSERT (Root != NULL);
+
+ //
+ // Open file
+ //
+ Status = Root->Open (
+ Root,
+ File,
+ MappedFile,
+ OpenMode,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ *File = NULL;
+ }
+
+ //
+ // Close the Root directory
+ //
+ Root->Close (Root);
+ return Status;
+}
+
+
+EFI_STATUS
+CheckStore (
+ IN EFI_HANDLE SimpleFileSystemHandle,
+ OUT EFI_DEVICE_PATH_PROTOCOL **Device
+ )
+{
+ EFI_STATUS Status;
+ EFI_BLOCK_IO_PROTOCOL *BlkIo;
+ EFI_FILE_PROTOCOL *File;
+
+ *Device = NULL;
+ Status = gBS->HandleProtocol (
+ SimpleFileSystemHandle,
+ &gEfiBlockIoProtocolGuid,
+ (VOID*)&BlkIo
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto ErrHandle;
+ }
+ if (!BlkIo->Media->MediaPresent) {
+ DEBUG ((DEBUG_ERROR, "FwhMappedFile: Media not present!\n"));
+ Status = EFI_NO_MEDIA;
+ goto ErrHandle;
+ }
+ if (BlkIo->Media->ReadOnly) {
+ DEBUG ((DEBUG_ERROR, "FwhMappedFile: Media is read-only!\n"));
+ Status = EFI_ACCESS_DENIED;
+ goto ErrHandle;
+ }
+
+ Status = FileOpen (DevicePathFromHandle (SimpleFileSystemHandle),
+ mFvInstance->MappedFile, &File,
+ EFI_FILE_MODE_READ);
+ if (EFI_ERROR (Status)) {
+ goto ErrHandle;
+ }
+
+ /* We found it! Maybe do more checks...? */
+
+ FileClose (File);
+ *Device = DuplicateDevicePath (DevicePathFromHandle (SimpleFileSystemHandle));
+
+ ASSERT (*Device != NULL);
+
+ErrHandle:
+ return Status;
+}
+
+
+EFI_STATUS
+CheckStoreExists (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device
+ )
+{
+ EFI_HANDLE Handle;
+ EFI_SIMPLE_FILE_SYSTEM_PROTOCOL *Volume;
+ EFI_STATUS Status;
+
+ Status = gBS->LocateDevicePath (
+ &gEfiSimpleFileSystemProtocolGuid,
+ &Device,
+ &Handle
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->HandleProtocol (
+ Handle,
+ &gEfiSimpleFileSystemProtocolGuid,
+ (void **) &Volume
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c
new file mode 100644
index 000000000000..ddfd746b0eca
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c
@@ -0,0 +1,118 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Pi/PiFirmwareVolume.h>
+#include <Guid/SystemNvDataGuid.h>
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+
+typedef struct {
+ UINT64 FvLength;
+ EFI_FIRMWARE_VOLUME_HEADER FvbInfo;
+ //
+ // EFI_FV_BLOCK_MAP_ENTRY ExtraBlockMap[n];//n=0
+ //
+ EFI_FV_BLOCK_MAP_ENTRY End[1];
+} EFI_FVB_MEDIA_INFO;
+
+EFI_FVB_MEDIA_INFO mPlatformFvbMediaInfo[] = {
+ //
+ // System NvStorage FVB
+ //
+ {
+ FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize),
+ {
+ {
+ 0,
+ }, // ZeroVector[16]
+ EFI_SYSTEM_NV_DATA_FV_GUID,
+ FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize),
+ EFI_FVH_SIGNATURE,
+ EFI_FVB2_MEMORY_MAPPED |
+ EFI_FVB2_READ_ENABLED_CAP |
+ EFI_FVB2_READ_STATUS |
+ EFI_FVB2_WRITE_ENABLED_CAP |
+ EFI_FVB2_WRITE_STATUS |
+ EFI_FVB2_ERASE_POLARITY |
+ EFI_FVB2_ALIGNMENT_16,
+ sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY),
+ 0, // CheckSum
+ 0, // ExtHeaderOffset
+ {
+ 0,
+ }, // Reserved[1]
+ 2, // Revision
+ {
+ {
+ (FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize)) /
+ FixedPcdGet32 (PcdFirmwareBlockSize),
+ FixedPcdGet32 (PcdFirmwareBlockSize),
+ }
+ } // BlockMap[1]
+ },
+ {
+ {
+ 0,
+ 0
+ }
+ } // End[1]
+ }
+};
+
+
+EFI_STATUS
+GetFvbInfo (
+ IN UINT64 FvLength,
+ OUT EFI_FIRMWARE_VOLUME_HEADER **FvbInfo
+ )
+{
+ STATIC BOOLEAN Checksummed = FALSE;
+ UINTN Index;
+
+ if (!Checksummed) {
+ for (Index = 0;
+ Index < sizeof (mPlatformFvbMediaInfo) / sizeof (EFI_FVB_MEDIA_INFO);
+ Index += 1) {
+ UINT16 Checksum;
+ mPlatformFvbMediaInfo[Index].FvbInfo.Checksum = 0;
+ Checksum = CalculateCheckSum16 (
+ (UINT16*) &mPlatformFvbMediaInfo[Index].FvbInfo,
+ mPlatformFvbMediaInfo[Index].FvbInfo.HeaderLength
+ );
+ mPlatformFvbMediaInfo[Index].FvbInfo.Checksum = Checksum;
+ }
+ Checksummed = TRUE;
+ }
+
+ for (Index = 0;
+ Index < sizeof (mPlatformFvbMediaInfo) / sizeof (EFI_FVB_MEDIA_INFO);
+ Index += 1) {
+ if (mPlatformFvbMediaInfo[Index].FvLength == FvLength) {
+ *FvbInfo = &mPlatformFvbMediaInfo[Index].FvbInfo;
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c
new file mode 100644
index 000000000000..1cea51936ba2
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c
@@ -0,0 +1,984 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Protocol/DevicePath.h>
+#include <Protocol/FirmwareVolumeBlock.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include "VarBlockService.h"
+
+#define EFI_FVB2_STATUS \
+ (EFI_FVB2_READ_STATUS | EFI_FVB2_WRITE_STATUS | EFI_FVB2_LOCK_STATUS)
+
+EFI_FW_VOL_INSTANCE *mFvInstance;
+
+FV_MEMMAP_DEVICE_PATH mFvMemmapDevicePathTemplate = {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_MEMMAP_DP,
+ {
+ (UINT8)(sizeof (MEMMAP_DEVICE_PATH)),
+ (UINT8)(sizeof (MEMMAP_DEVICE_PATH) >> 8)
+ }
+ },
+ EfiMemoryMappedIO,
+ (EFI_PHYSICAL_ADDRESS) 0,
+ (EFI_PHYSICAL_ADDRESS) 0,
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ END_DEVICE_PATH_LENGTH,
+ 0
+ }
+ }
+};
+
+FV_PIWG_DEVICE_PATH mFvPIWGDevicePathTemplate = {
+ {
+ {
+ MEDIA_DEVICE_PATH,
+ MEDIA_PIWG_FW_VOL_DP,
+ {
+ (UINT8)(sizeof (MEDIA_FW_VOL_DEVICE_PATH)),
+ (UINT8)(sizeof (MEDIA_FW_VOL_DEVICE_PATH) >> 8)
+ }
+ },
+ { 0 }
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ END_DEVICE_PATH_LENGTH,
+ 0
+ }
+ }
+};
+
+EFI_FW_VOL_BLOCK_DEVICE mFvbDeviceTemplate = {
+ NULL,
+ {
+ FvbProtocolGetAttributes,
+ FvbProtocolSetAttributes,
+ FvbProtocolGetPhysicalAddress,
+ FvbProtocolGetBlockSize,
+ FvbProtocolRead,
+ FvbProtocolWrite,
+ FvbProtocolEraseBlocks,
+ NULL
+ }
+};
+
+
+EFI_STATUS
+VarStoreWrite (
+ IN UINTN Address,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+{
+ CopyMem ((VOID *) Address, Buffer, *NumBytes);
+ mFvInstance->Dirty = TRUE;
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+VarStoreErase (
+ IN UINTN Address,
+ IN UINTN LbaLength
+ )
+{
+ SetMem ((VOID *)Address, LbaLength, 0xff);
+ mFvInstance->Dirty = TRUE;
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+FvbGetVolumeAttributes (
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+{
+ *Attributes = mFvInstance->VolumeHeader->Attributes;
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+FvbGetLbaAddress (
+ IN EFI_LBA Lba,
+ OUT UINTN *LbaAddress,
+ OUT UINTN *LbaLength,
+ OUT UINTN *NumOfBlocks
+ )
+/*++
+
+ Routine Description:
+ Retrieves the starting address of an LBA in an FV
+
+ Arguments:
+ Lba - The logical block address
+ LbaAddress - On output, contains the physical starting address
+ of the Lba
+ LbaLength - On output, contains the length of the block
+ NumOfBlocks - A pointer to a caller allocated UINTN in which the
+ number of consecutive blocks starting with Lba is
+ returned. All blocks in this range have a size of
+ BlockSize
+
+ Returns:
+ EFI_SUCCESS
+ EFI_INVALID_PARAMETER
+
+--*/
+{
+ UINT32 NumBlocks;
+ UINT32 BlockLength;
+ UINTN Offset;
+ EFI_LBA StartLba;
+ EFI_LBA NextLba;
+ EFI_FV_BLOCK_MAP_ENTRY *BlockMap;
+
+ StartLba = 0;
+ Offset = 0;
+ BlockMap = &(mFvInstance->VolumeHeader->BlockMap[0]);
+
+ //
+ // Parse the blockmap of the FV to find which map entry the Lba belongs to.
+ //
+ while (TRUE) {
+ NumBlocks = BlockMap->NumBlocks;
+ BlockLength = BlockMap->Length;
+
+ if (NumBlocks == 0 || BlockLength == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ NextLba = StartLba + NumBlocks;
+
+ //
+ // The map entry found.
+ //
+ if (Lba >= StartLba && Lba < NextLba) {
+ Offset = Offset + (UINTN) MultU64x32 ((Lba - StartLba), BlockLength);
+ if (LbaAddress != NULL) {
+ *LbaAddress = mFvInstance->FvBase + Offset;
+ }
+
+ if (LbaLength != NULL) {
+ *LbaLength = BlockLength;
+ }
+
+ if (NumOfBlocks != NULL) {
+ *NumOfBlocks = (UINTN) (NextLba - Lba);
+ }
+
+ return EFI_SUCCESS;
+ }
+
+ StartLba = NextLba;
+ Offset = Offset + NumBlocks * BlockLength;
+ BlockMap++;
+ }
+}
+
+
+EFI_STATUS
+FvbEraseBlock (
+ IN EFI_LBA Lba
+ )
+/*++
+
+Routine Description:
+ Erases and initializes a firmware volume block
+
+Arguments:
+ Lba - The logical block index to be erased
+
+Returns:
+ EFI_SUCCESS - The erase request was successfully completed
+ EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be written. Firmware device may have been
+ partially erased
+ EFI_INVALID_PARAMETER
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 Attributes;
+ UINTN LbaAddress;
+ UINTN LbaLength;
+ EFI_STATUS Status;
+
+ //
+ // Check if the FV is write enabled
+ //
+ FvbGetVolumeAttributes (&Attributes);
+
+ if ((Attributes & EFI_FVB2_WRITE_STATUS) == 0) {
+ return EFI_ACCESS_DENIED;
+ }
+ //
+ // Get the starting address of the block for erase. For debug reasons,
+ // LbaWriteAddress may not be the same as LbaAddress.
+ //
+ Status = FvbGetLbaAddress (Lba, &LbaAddress, &LbaLength, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return VarStoreErase (
+ LbaAddress,
+ LbaLength
+ );
+}
+
+
+EFI_STATUS
+FvbSetVolumeAttributes (
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+/*++
+
+ Routine Description:
+ Modifies the current settings of the firmware volume according to the
+ input parameter, and returns the new setting of the volume
+
+ Arguments:
+ Attributes - On input, it is a pointer to EFI_FVB_ATTRIBUTES_2
+ containing the desired firmware volume settings.
+ On successful return, it contains the new setting.
+
+ Returns:
+ EFI_SUCCESS - Successfully returns
+ EFI_ACCESS_DENIED - The volume setting is locked and cannot be modified
+ EFI_INVALID_PARAMETER
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 OldAttributes;
+ EFI_FVB_ATTRIBUTES_2 *AttribPtr;
+ UINT32 Capabilities;
+ UINT32 OldStatus;
+ UINT32 NewStatus;
+ EFI_FVB_ATTRIBUTES_2 UnchangedAttributes;
+
+ AttribPtr =
+ (EFI_FVB_ATTRIBUTES_2 *) &(mFvInstance->VolumeHeader->Attributes);
+ OldAttributes = *AttribPtr;
+ Capabilities = OldAttributes & (EFI_FVB2_READ_DISABLED_CAP | \
+ EFI_FVB2_READ_ENABLED_CAP | \
+ EFI_FVB2_WRITE_DISABLED_CAP | \
+ EFI_FVB2_WRITE_ENABLED_CAP | \
+ EFI_FVB2_LOCK_CAP \
+ );
+ OldStatus = OldAttributes & EFI_FVB2_STATUS;
+ NewStatus = *Attributes & EFI_FVB2_STATUS;
+
+ UnchangedAttributes = EFI_FVB2_READ_DISABLED_CAP | \
+ EFI_FVB2_READ_ENABLED_CAP | \
+ EFI_FVB2_WRITE_DISABLED_CAP | \
+ EFI_FVB2_WRITE_ENABLED_CAP | \
+ EFI_FVB2_LOCK_CAP | \
+ EFI_FVB2_STICKY_WRITE | \
+ EFI_FVB2_MEMORY_MAPPED | \
+ EFI_FVB2_ERASE_POLARITY | \
+ EFI_FVB2_READ_LOCK_CAP | \
+ EFI_FVB2_WRITE_LOCK_CAP | \
+ EFI_FVB2_ALIGNMENT;
+
+ //
+ // Some attributes of FV is read only can *not* be set.
+ //
+ if ((OldAttributes & UnchangedAttributes) ^
+ (*Attributes & UnchangedAttributes)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // If firmware volume is locked, no status bit can be updated.
+ //
+ if (OldAttributes & EFI_FVB2_LOCK_STATUS) {
+ if (OldStatus ^ NewStatus) {
+ return EFI_ACCESS_DENIED;
+ }
+ }
+
+ //
+ // Test read disable.
+ //
+ if ((Capabilities & EFI_FVB2_READ_DISABLED_CAP) == 0) {
+ if ((NewStatus & EFI_FVB2_READ_STATUS) == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test read enable.
+ //
+ if ((Capabilities & EFI_FVB2_READ_ENABLED_CAP) == 0) {
+ if (NewStatus & EFI_FVB2_READ_STATUS) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test write disable.
+ //
+ if ((Capabilities & EFI_FVB2_WRITE_DISABLED_CAP) == 0) {
+ if ((NewStatus & EFI_FVB2_WRITE_STATUS) == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test write enable.
+ //
+ if ((Capabilities & EFI_FVB2_WRITE_ENABLED_CAP) == 0) {
+ if (NewStatus & EFI_FVB2_WRITE_STATUS) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test lock.
+ //
+ if ((Capabilities & EFI_FVB2_LOCK_CAP) == 0) {
+ if (NewStatus & EFI_FVB2_LOCK_STATUS) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ *AttribPtr = (*AttribPtr) & (0xFFFFFFFF & (~EFI_FVB2_STATUS));
+ *AttribPtr = (*AttribPtr) | NewStatus;
+ *Attributes = *AttribPtr;
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetPhysicalAddress (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ )
+{
+ *Address = mFvInstance->FvBase;
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetBlockSize (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ OUT UINTN *BlockSize,
+ OUT UINTN *NumOfBlocks
+ )
+/*++
+
+ Routine Description:
+ Retrieve the size of a logical block
+
+ Arguments:
+ This - Calling context
+ Lba - Indicates which block to return the size for.
+ BlockSize - A pointer to a caller allocated UINTN in which
+ the size of the block is returned
+ NumOfBlocks - a pointer to a caller allocated UINTN in which the
+ number of consecutive blocks starting with Lba is
+ returned. All blocks in this range have a size of
+ BlockSize
+
+ Returns:
+ EFI_SUCCESS - The firmware volume was read successfully and
+ contents are in Buffer
+
+--*/
+{
+ return FvbGetLbaAddress (
+ Lba,
+ NULL,
+ BlockSize,
+ NumOfBlocks
+ );
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+/*++
+
+ Routine Description:
+ Retrieves Volume attributes. No polarity translations are done.
+
+ Arguments:
+ This - Calling context
+ Attributes - output buffer which contains attributes
+
+ Returns:
+ EFI_SUCCESS - Successfully returns
+
+--*/
+{
+ return FvbGetVolumeAttributes (Attributes);
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolSetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+/*++
+
+ Routine Description:
+ Sets Volume attributes. No polarity translations are done.
+
+ Arguments:
+ This - Calling context
+ Attributes - output buffer which contains attributes
+
+ Returns:
+ EFI_SUCCESS - Successfully returns
+
+--*/
+{
+ return FvbSetVolumeAttributes (Attributes);
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolEraseBlocks (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL*This,
+ ...
+ )
+/*++
+
+ Routine Description:
+
+ The EraseBlock() function erases one or more blocks as denoted by the
+ variable argument list. The entire parameter list of blocks must be
+ verified prior to erasing any blocks. If a block is requested that does
+ not exist within the associated firmware volume (it has a larger index than
+ the last block of the firmware volume), the EraseBlock() function must
+ return EFI_INVALID_PARAMETER without modifying the contents of the firmware
+ volume.
+
+ Arguments:
+ This - Calling context
+ ... - Starting LBA followed by Number of Lba to erase.
+ a -1 to terminate the list.
+
+ Returns:
+ EFI_SUCCESS - The erase request was successfully completed
+ EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be written. Firmware device may have been
+ partially erased
+
+--*/
+{
+ UINTN NumOfBlocks;
+ VA_LIST args;
+ EFI_LBA StartingLba;
+ UINTN NumOfLba;
+ EFI_STATUS Status;
+
+ NumOfBlocks = mFvInstance->NumOfBlocks;
+ VA_START (args, This);
+
+ do {
+ StartingLba = VA_ARG (args, EFI_LBA);
+ if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
+ break;
+ }
+
+ NumOfLba = VA_ARG (args, UINTN);
+
+ if ((NumOfLba == 0) || ((StartingLba + NumOfLba) > NumOfBlocks)) {
+ VA_END (args);
+ return EFI_INVALID_PARAMETER;
+ }
+ } while (1);
+
+ VA_END (args);
+
+ VA_START (args, This);
+ do {
+ StartingLba = VA_ARG (args, EFI_LBA);
+ if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
+ break;
+ }
+
+ NumOfLba = VA_ARG (args, UINTN);
+
+ while (NumOfLba > 0) {
+ Status = FvbEraseBlock (StartingLba);
+ if (EFI_ERROR (Status)) {
+ VA_END (args);
+ return Status;
+ }
+
+ StartingLba++;
+ NumOfLba--;
+ }
+
+ } while (1);
+
+ VA_END (args);
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolWrite (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+/*++
+
+ Routine Description:
+
+ Writes data beginning at Lba:Offset from FV. The write terminates either
+ when *NumBytes of data have been written, or when a block boundary is
+ reached. *NumBytes is updated to reflect the actual number of bytes
+ written. The write opertion does not include erase. This routine will
+ attempt to write only the specified bytes. If the writes do not stick,
+ it will return an error.
+
+ Arguments:
+ This - Calling context
+ Lba - Block in which to begin write
+ Offset - Offset in the block at which to begin write
+ NumBytes - On input, indicates the requested write size. On
+ output, indicates the actual number of bytes
+ written
+ Buffer - Buffer containing source data for the write.
+
+ Returns:
+ EFI_SUCCESS - The firmware volume was written successfully
+ EFI_BAD_BUFFER_SIZE - Write attempted across a LBA boundary. On output,
+ NumBytes contains the total number of bytes
+ actually written
+ EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be written
+ EFI_INVALID_PARAMETER - NumBytes or Buffer are NULL
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 Attributes;
+ UINTN LbaAddress;
+ UINTN LbaLength;
+ EFI_STATUS Status;
+ EFI_STATUS ReturnStatus;
+
+ //
+ // Check for invalid conditions.
+ //
+ if ((NumBytes == NULL) || (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*NumBytes == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = FvbGetLbaAddress (Lba, &LbaAddress, &LbaLength, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Check if the FV is write enabled.
+ //
+ FvbGetVolumeAttributes (&Attributes);
+
+ if ((Attributes & EFI_FVB2_WRITE_STATUS) == 0) {
+ return EFI_ACCESS_DENIED;
+ }
+
+ //
+ // Perform boundary checks and adjust NumBytes.
+ //
+ if (Offset > LbaLength) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (LbaLength < (*NumBytes + Offset)) {
+ *NumBytes = (UINT32) (LbaLength - Offset);
+ Status = EFI_BAD_BUFFER_SIZE;
+ }
+
+ ReturnStatus = VarStoreWrite (
+ LbaAddress + Offset,
+ NumBytes,
+ Buffer
+ );
+ if (EFI_ERROR (ReturnStatus)) {
+ return ReturnStatus;
+ }
+
+ return Status;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolRead (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ IN CONST UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+/*++
+
+ Routine Description:
+
+ Reads data beginning at Lba:Offset from FV. The Read terminates either
+ when *NumBytes of data have been read, or when a block boundary is
+ reached. *NumBytes is updated to reflect the actual number of bytes
+ written. The write opertion does not include erase. This routine will
+ attempt to write only the specified bytes. If the writes do not stick,
+ it will return an error.
+
+ Arguments:
+ This - Calling context
+ Lba - Block in which to begin Read
+ Offset - Offset in the block at which to begin Read
+ NumBytes - On input, indicates the requested write size. On
+ output, indicates the actual number of bytes Read
+ Buffer - Buffer containing source data for the Read.
+
+ Returns:
+ EFI_SUCCESS - The firmware volume was read successfully and
+ contents are in Buffer
+ EFI_BAD_BUFFER_SIZE - Read attempted across a LBA boundary. On output,
+ NumBytes contains the total number of bytes
+ returned in Buffer
+ EFI_ACCESS_DENIED - The firmware volume is in the ReadDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be read
+ EFI_INVALID_PARAMETER - NumBytes or Buffer are NULL
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 Attributes;
+ UINTN LbaAddress;
+ UINTN LbaLength;
+ EFI_STATUS Status;
+
+ //
+ // Check for invalid conditions.
+ //
+ if ((NumBytes == NULL) || (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*NumBytes == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = FvbGetLbaAddress (Lba, &LbaAddress, &LbaLength, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Check if the FV is read enabled.
+ //
+ FvbGetVolumeAttributes (&Attributes);
+
+ if ((Attributes & EFI_FVB2_READ_STATUS) == 0) {
+ return EFI_ACCESS_DENIED;
+ }
+
+ //
+ // Perform boundary checks and adjust NumBytes.
+ //
+ if (Offset > LbaLength) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (LbaLength < (*NumBytes + Offset)) {
+ *NumBytes = (UINT32) (LbaLength - Offset);
+ Status = EFI_BAD_BUFFER_SIZE;
+ }
+
+ CopyMem (Buffer, (VOID *) (LbaAddress + Offset), (UINTN) *NumBytes);
+
+ return Status;
+}
+
+
+EFI_STATUS
+ValidateFvHeader (
+ IN EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader
+ )
+/*++
+
+ Routine Description:
+ Check the integrity of firmware volume header
+
+ Arguments:
+ FwVolHeader - A pointer to a firmware volume header
+
+ Returns:
+ EFI_SUCCESS - The firmware volume is consistent
+ EFI_NOT_FOUND - The firmware volume has corrupted. So it is not an
+ FV
+
+--*/
+{
+ UINT16 Checksum;
+
+ //
+ // Verify the header revision, header signature, length
+ // Length of FvBlock cannot be 2**64-1
+ // HeaderLength cannot be an odd number.
+ //
+ if ((FwVolHeader->Revision != EFI_FVH_REVISION) ||
+ (FwVolHeader->Signature != EFI_FVH_SIGNATURE) ||
+ (FwVolHeader->FvLength == ((UINTN) -1)) ||
+ ((FwVolHeader->HeaderLength & 0x01) != 0)
+ ) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Verify the header checksum.
+ //
+
+ Checksum = CalculateSum16 ((UINT16 *) FwVolHeader,
+ FwVolHeader->HeaderLength);
+ if (Checksum != 0) {
+ UINT16 Expected;
+
+ Expected =
+ (UINT16) (((UINTN) FwVolHeader->Checksum + 0x10000 - Checksum) & 0xffff);
+
+ DEBUG ((DEBUG_INFO, "FV@%p Checksum is 0x%x, expected 0x%x\n",
+ FwVolHeader, FwVolHeader->Checksum, Expected));
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+/*++
+
+ Routine Description:
+ This function does common initialization for FVB services
+
+ Arguments:
+
+ Returns:
+
+--*/
+{
+ EFI_STATUS Status;
+ UINT32 BufferSize;
+ EFI_FV_BLOCK_MAP_ENTRY *PtrBlockMapEntry;
+ EFI_FW_VOL_BLOCK_DEVICE *FvbDevice;
+ UINT32 MaxLbaSize;
+ EFI_PHYSICAL_ADDRESS BaseAddress;
+ UINTN Length;
+ UINTN NumOfBlocks;
+ RETURN_STATUS PcdStatus;
+ UINTN StartOffset;
+
+ BaseAddress = PcdGet32 (PcdNvStorageVariableBase);
+ Length = (FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize));
+ StartOffset = BaseAddress - FixedPcdGet64 (PcdFdBaseAddress);
+
+ BufferSize = sizeof (EFI_FW_VOL_INSTANCE);
+
+ mFvInstance = AllocateRuntimeZeroPool (BufferSize);
+ if (mFvInstance == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ mFvInstance->FvBase = (UINTN) BaseAddress;
+ mFvInstance->FvLength = (UINTN) Length;
+ mFvInstance->Offset = StartOffset;
+ /*
+ * Should I parse config.txt instead and find the real name?
+ */
+ mFvInstance->MappedFile = L"RPI_EFI.FD";
+
+ Status = ValidateFvHeader (mFvInstance->VolumeHeader);
+ if (!EFI_ERROR (Status)) {
+ if (mFvInstance->VolumeHeader->FvLength != Length ||
+ mFvInstance->VolumeHeader->BlockMap[0].Length !=
+ PcdGet32 (PcdFirmwareBlockSize)) {
+ Status = EFI_VOLUME_CORRUPTED;
+ }
+ }
+ if (EFI_ERROR (Status)) {
+ EFI_FIRMWARE_VOLUME_HEADER *GoodFwVolHeader;
+ UINTN WriteLength;
+
+ DEBUG ((DEBUG_INFO,
+ "Variable FV header is not valid. It will be reinitialized.\n"));
+
+ //
+ // Get FvbInfo
+ //
+ Status = GetFvbInfo (Length, &GoodFwVolHeader);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Erase all the blocks
+ //
+ Status = VarStoreErase ((UINTN) mFvInstance->FvBase,
+ mFvInstance->FvLength);
+ ASSERT_EFI_ERROR (Status);
+ //
+ // Write good FV header
+ //
+ WriteLength = GoodFwVolHeader->HeaderLength;
+ Status = VarStoreWrite((UINTN) mFvInstance->FvBase,
+ &WriteLength,
+ (UINT8*) GoodFwVolHeader);
+ ASSERT_EFI_ERROR (Status);
+ ASSERT (WriteLength == GoodFwVolHeader->HeaderLength);
+
+ Status = ValidateFvHeader (mFvInstance->VolumeHeader);
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ MaxLbaSize = 0;
+ NumOfBlocks = 0;
+ for (PtrBlockMapEntry = mFvInstance->VolumeHeader->BlockMap;
+ PtrBlockMapEntry->NumBlocks != 0;
+ PtrBlockMapEntry++) {
+ //
+ // Get the maximum size of a block.
+ //
+ if (MaxLbaSize < PtrBlockMapEntry->Length) {
+ MaxLbaSize = PtrBlockMapEntry->Length;
+ }
+
+ NumOfBlocks = NumOfBlocks + PtrBlockMapEntry->NumBlocks;
+ }
+
+ //
+ // The total number of blocks in the FV.
+ //
+ mFvInstance->NumOfBlocks = NumOfBlocks;
+
+ //
+ // Add a FVB Protocol Instance
+ //
+ FvbDevice = AllocateRuntimePool (sizeof (EFI_FW_VOL_BLOCK_DEVICE));
+ ASSERT (FvbDevice != NULL);
+ CopyMem (FvbDevice, &mFvbDeviceTemplate, sizeof (EFI_FW_VOL_BLOCK_DEVICE));
+
+ //
+ // Set up the devicepath
+ //
+ if (mFvInstance->VolumeHeader->ExtHeaderOffset == 0) {
+ FV_MEMMAP_DEVICE_PATH *FvMemmapDevicePath;
+
+ //
+ // FV does not contains extension header, then produce MEMMAP_DEVICE_PATH
+ //
+ FvMemmapDevicePath = AllocateCopyPool (sizeof (FV_MEMMAP_DEVICE_PATH),
+ &mFvMemmapDevicePathTemplate);
+ FvMemmapDevicePath->MemMapDevPath.StartingAddress = mFvInstance->FvBase;
+ FvMemmapDevicePath->MemMapDevPath.EndingAddress = mFvInstance->FvBase +
+ mFvInstance->FvLength - 1;
+ FvbDevice->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)FvMemmapDevicePath;
+ } else {
+ FV_PIWG_DEVICE_PATH *FvPiwgDevicePath;
+
+ FvPiwgDevicePath = AllocateCopyPool (sizeof (FV_PIWG_DEVICE_PATH),
+ &mFvPIWGDevicePathTemplate);
+ CopyGuid (
+ &FvPiwgDevicePath->FvDevPath.FvName,
+ (GUID *)(UINTN)(mFvInstance->FvBase +
+ mFvInstance->VolumeHeader->ExtHeaderOffset)
+ );
+ FvbDevice->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)FvPiwgDevicePath;
+ }
+
+ //
+ // Module type specific hook.
+ //
+ InstallProtocolInterfaces (FvbDevice);
+
+ //
+ // Set several PCD values to point to flash.
+ //
+ PcdStatus = PcdSet64S (
+ PcdFlashNvStorageVariableBase64,
+ (UINTN) PcdGet32 (PcdNvStorageVariableBase)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+ PcdStatus = PcdSet32S (
+ PcdFlashNvStorageFtwWorkingBase,
+ PcdGet32 (PcdNvStorageFtwWorkingBase)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+ PcdStatus = PcdSet32S (
+ PcdFlashNvStorageFtwSpareBase,
+ PcdGet32 (PcdNvStorageFtwSpareBase)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ InstallFSNotifyHandler ();
+ InstallDumpVarEventHandlers ();
+ InstallVirtualAddressChangeHandler ();
+
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h
new file mode 100644
index 000000000000..3596c4ac55b9
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h
@@ -0,0 +1,217 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2007-2009, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef _FW_BLOCK_SERVICE_H
+#define _FW_BLOCK_SERVICE_H
+
+#include <Guid/EventGroup.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/FirmwareVolumeBlock.h>
+#include <Protocol/SimpleFileSystem.h>
+#include <Protocol/BlockIo.h>
+#include <Protocol/LoadedImage.h>
+
+typedef struct {
+ union {
+ UINTN FvBase;
+ EFI_FIRMWARE_VOLUME_HEADER *VolumeHeader;
+ };
+ UINTN FvLength;
+ UINTN Offset;
+ UINTN NumOfBlocks;
+ EFI_DEVICE_PATH_PROTOCOL *Device;
+ CHAR16 *MappedFile;
+ BOOLEAN Dirty;
+} EFI_FW_VOL_INSTANCE;
+
+extern EFI_FW_VOL_INSTANCE *mFvInstance;
+
+typedef struct {
+ MEDIA_FW_VOL_DEVICE_PATH FvDevPath;
+ EFI_DEVICE_PATH_PROTOCOL EndDevPath;
+} FV_PIWG_DEVICE_PATH;
+
+typedef struct {
+ MEMMAP_DEVICE_PATH MemMapDevPath;
+ EFI_DEVICE_PATH_PROTOCOL EndDevPath;
+} FV_MEMMAP_DEVICE_PATH;
+
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL FwVolBlockInstance;
+} EFI_FW_VOL_BLOCK_DEVICE;
+
+EFI_STATUS
+GetFvbInfo (
+ IN UINT64 FvLength,
+ OUT EFI_FIRMWARE_VOLUME_HEADER **FvbInfo
+ );
+
+EFI_STATUS
+FvbSetVolumeAttributes (
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+FvbGetVolumeAttributes (
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+FvbGetPhysicalAddress (
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ );
+
+EFI_STATUS
+EFIAPI
+FvbInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ );
+
+
+VOID
+EFIAPI
+FvbClassAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+EFI_STATUS
+FvbGetLbaAddress (
+ IN EFI_LBA Lba,
+ OUT UINTN *LbaAddress,
+ OUT UINTN *LbaLength,
+ OUT UINTN *NumOfBlocks
+ );
+
+//
+// Protocol APIs
+//
+EFI_STATUS
+EFIAPI
+FvbProtocolGetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolSetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetPhysicalAddress (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetBlockSize (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ OUT UINTN *BlockSize,
+ OUT UINTN *NumOfBlocks
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolRead (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ IN CONST UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolWrite (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolEraseBlocks (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ ...
+ );
+
+VOID
+InstallProtocolInterfaces (
+ IN EFI_FW_VOL_BLOCK_DEVICE *FvbDevice
+ );
+
+VOID
+InstallVirtualAddressChangeHandler (
+ VOID
+ );
+
+VOID
+InstallFSNotifyHandler (
+ VOID
+ );
+
+VOID
+InstallDumpVarEventHandlers (
+ VOID
+);
+
+EFI_STATUS
+FileWrite (
+ IN EFI_FILE_PROTOCOL *File,
+ IN UINTN Offset,
+ IN UINTN Buffer,
+ IN UINTN Size
+ );
+
+EFI_STATUS
+CheckStore (
+ IN EFI_HANDLE SimpleFileSystemHandle,
+ OUT EFI_DEVICE_PATH_PROTOCOL **Device
+ );
+
+EFI_STATUS
+CheckStoreExists (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device
+ );
+
+EFI_STATUS
+FileOpen (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device,
+ IN CHAR16 *MappedFile,
+ OUT EFI_FILE_PROTOCOL **File,
+ IN UINT64 OpenMode
+ );
+
+VOID
+FileClose (
+ IN EFI_FILE_PROTOCOL *File
+ );
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c
new file mode 100644
index 000000000000..8c4db3dcfd59
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c
@@ -0,0 +1,334 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (C) 2015, Red Hat, Inc.
+ * Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "VarBlockService.h"
+
+VOID *mSFSRegistration;
+
+
+VOID
+InstallProtocolInterfaces (
+ IN EFI_FW_VOL_BLOCK_DEVICE *FvbDevice
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE FwbHandle;
+ EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *OldFwbInterface;
+
+ //
+ // Find a handle with a matching device path that has supports FW Block
+ // protocol.
+ //
+ Status = gBS->LocateDevicePath (&gEfiFirmwareVolumeBlockProtocolGuid,
+ &FvbDevice->DevicePath, &FwbHandle);
+ if (EFI_ERROR (Status)) {
+ //
+ // LocateDevicePath fails so install a new interface and device path.
+ //
+ FwbHandle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &FwbHandle,
+ &gEfiFirmwareVolumeBlockProtocolGuid,
+ &FvbDevice->FwVolBlockInstance,
+ &gEfiDevicePathProtocolGuid,
+ FvbDevice->DevicePath,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+ } else if (IsDevicePathEnd (FvbDevice->DevicePath)) {
+ //
+ // Device already exists, so reinstall the FVB protocol
+ //
+ Status = gBS->HandleProtocol (
+ FwbHandle,
+ &gEfiFirmwareVolumeBlockProtocolGuid,
+ (VOID**)&OldFwbInterface
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->ReinstallProtocolInterface (
+ FwbHandle,
+ &gEfiFirmwareVolumeBlockProtocolGuid,
+ OldFwbInterface,
+ &FvbDevice->FwVolBlockInstance
+ );
+ ASSERT_EFI_ERROR (Status);
+ } else {
+ //
+ // There was a FVB protocol on an End Device Path node
+ //
+ ASSERT (FALSE);
+ }
+}
+
+
+STATIC
+VOID
+EFIAPI
+FvbVirtualAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+/*++
+
+ Routine Description:
+
+ Fixup internal data so that EFI can be called in virtual mode.
+
+ Arguments:
+
+ (Standard EFI notify event - EFI_EVENT_NOTIFY)
+
+ Returns:
+
+ None
+
+--*/
+{
+ EfiConvertPointer (0x0, (VOID **) &mFvInstance->FvBase);
+ EfiConvertPointer (0x0, (VOID **) &mFvInstance->VolumeHeader);
+ EfiConvertPointer (0x0, (VOID **) &mFvInstance);
+}
+
+
+VOID
+InstallVirtualAddressChangeHandler (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT VirtualAddressChangeEvent;
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ FvbVirtualAddressChangeEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &VirtualAddressChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+
+STATIC
+EFI_STATUS
+DoDump(
+ IN EFI_DEVICE_PATH_PROTOCOL *Device
+ )
+{
+ EFI_STATUS Status;
+ EFI_FILE_PROTOCOL *File;
+
+ Status = FileOpen (Device,
+ mFvInstance->MappedFile,
+ &File,
+ EFI_FILE_MODE_WRITE |
+ EFI_FILE_MODE_READ);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = FileWrite (File,
+ mFvInstance->Offset,
+ mFvInstance->FvBase,
+ mFvInstance->FvLength);
+ FileClose (File);
+ return Status;
+}
+
+
+STATIC
+VOID
+EFIAPI
+DumpVars(
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+
+ if (mFvInstance->Device == NULL) {
+ DEBUG((DEBUG_INFO, "Variable store not found?\n"));
+ return;
+ }
+
+ if (!mFvInstance->Dirty) {
+ DEBUG((DEBUG_INFO, "Variables not dirty, not dumping!\n"));
+ return;
+ }
+
+ Status = DoDump (mFvInstance->Device);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "Couldn't dump '%s'\n",
+ mFvInstance->MappedFile));
+ ASSERT_EFI_ERROR(Status);
+ return;
+ }
+
+ DEBUG((DEBUG_INFO, "Variables dumped!\n"));
+ mFvInstance->Dirty = FALSE;
+}
+
+
+VOID
+ReadyToBootHandler (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT ImageInstallEvent;
+ VOID *ImageRegistration;
+
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ DumpVars,
+ NULL,
+ &ImageInstallEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->RegisterProtocolNotify (
+ &gEfiLoadedImageProtocolGuid,
+ ImageInstallEvent,
+ &ImageRegistration
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ DumpVars(NULL, NULL);
+ Status = gBS->CloseEvent(Event);
+ ASSERT_EFI_ERROR (Status);
+}
+
+
+VOID
+InstallDumpVarEventHandlers (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT ResetEvent;
+ EFI_EVENT ReadyToBootEvent;
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ DumpVars,
+ NULL,
+ &gRaspberryPiEventResetGuid,
+ &ResetEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ ReadyToBootHandler,
+ NULL,
+ &gEfiEventReadyToBootGuid,
+ &ReadyToBootEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+
+VOID
+EFIAPI
+OnSimpleFileSystemInstall (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ UINTN HandleSize;
+ EFI_HANDLE Handle;
+ EFI_DEVICE_PATH_PROTOCOL *Device;
+
+ if ((mFvInstance->Device != NULL) &&
+ !EFI_ERROR (CheckStoreExists (mFvInstance->Device))
+ ) {
+ //
+ // We've already found the variable store before,
+ // and that device is not removed from the ssystem.
+ //
+ return;
+ }
+
+ while (TRUE) {
+ HandleSize = sizeof (EFI_HANDLE);
+ Status = gBS->LocateHandle (
+ ByRegisterNotify,
+ NULL,
+ mSFSRegistration,
+ &HandleSize,
+ &Handle
+ );
+ if (Status == EFI_NOT_FOUND) {
+ break;
+ }
+
+ ASSERT_EFI_ERROR (Status);
+
+ Status = CheckStore (Handle, &Device);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ Status = DoDump (Device);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "Couldn't update '%s'\n",
+ mFvInstance->MappedFile));
+ ASSERT_EFI_ERROR(Status);
+ continue;
+ }
+
+ if (mFvInstance->Device != NULL) {
+ gBS->FreePool (mFvInstance->Device);
+ }
+
+ DEBUG((DEBUG_INFO, "Found variable store!\n"));
+ mFvInstance->Device = Device;
+ break;
+ }
+}
+
+
+VOID
+InstallFSNotifyHandler (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT Event;
+
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ OnSimpleFileSystemInstall,
+ NULL,
+ &Event
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->RegisterProtocolNotify (
+ &gEfiSimpleFileSystemProtocolGuid,
+ Event,
+ &mSFSRegistration
+ );
+ ASSERT_EFI_ERROR (Status);
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
new file mode 100644
index 000000000000..95ec0f8a64e9
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
@@ -0,0 +1,93 @@
+#/** @file
+#
+# Support for the FS-backed "flash" device.
+# The trick is to keep it inside the RPI firmware file itself...
+#
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2006-2013, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = VarBlockServiceDxe
+ FILE_GUID = 733cbac2-b23f-4b92-bc8e-fb01ce5907b7
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = FvbInitialize
+
+#
+# The following information is for reference only and not required by the build
+# tools.
+#
+# VALID_ARCHITECTURES = AARCH64
+#
+
+[Sources]
+ FvbInfo.c
+ VarBlockService.c
+ VarBlockServiceDxe.c
+ FileIo.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ DevicePathLib
+ DxeServicesTableLib
+ MemoryAllocationLib
+ PcdLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiRuntimeLib
+
+[Guids]
+ gEfiEventVirtualAddressChangeGuid
+ gRaspberryPiEventResetGuid
+ gEfiEventReadyToBootGuid
+
+[Protocols]
+ gEfiSimpleFileSystemProtocolGuid
+ gEfiLoadedImageProtocolGuid
+ gEfiBlockIoProtocolGuid
+ gEfiFirmwareVolumeBlockProtocolGuid # PROTOCOL SOMETIMES_PRODUCED
+ gEfiDevicePathProtocolGuid # PROTOCOL SOMETIMES_PRODUCED
+
+[FixedPcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageVariableBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwWorkingBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwSpareBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogSize
+ gRaspberryPiTokenSpaceGuid.PcdFirmwareBlockSize
+ gArmTokenSpaceGuid.PcdFdBaseAddress
+ gArmTokenSpaceGuid.PcdFdSize
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
+
+[FeaturePcd]
+
+[Depex]
+ TRUE
diff --git a/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
new file mode 100644
index 000000000000..bd30324ff073
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
@@ -0,0 +1,70 @@
+/** @file
+ *
+ * Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2016, Linaro Limited. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **/
+
+/*
+ * Both "core" and SoC perpherals (1M each).
+ */
+#define BCM2836_SOC_REGISTERS 0x3f000000
+#define BCM2836_SOC_REGISTER_LENGTH 0x02000000
+
+/* Synopsis DW2/DWC USB 2.0 OTG. */
+#define BCM2836_USB_DW2_BASE_ADDRESS 0x3f980000
+
+/*
+ * Offset between the CPU's view and the VC's view of system memory.
+ */
+#define BCM2836_DMA_DEVICE_OFFSET 0xc0000000
+
+/* watchdog constants */
+#define BCM2836_WDOG_BASE_ADDRESS 0x3f100000
+#define BCM2836_WDOG_PASSWORD 0x5a000000
+#define BCM2836_WDOG_RSTC_OFFSET 0x0000001c
+#define BCM2836_WDOG_WDOG_OFFSET 0x00000024
+#define BCM2836_WDOG_RSTC_WRCFG_MASK 0x00000030
+#define BCM2836_WDOG_RSTC_WRCFG_FULL_RESET 0x00000020
+
+/* mailbox interface constants */
+#define BCM2836_MBOX_BASE_ADDRESS 0x3f00b880
+#define BCM2836_MBOX_READ_OFFSET 0x00000000
+#define BCM2836_MBOX_STATUS_OFFSET 0x00000018
+#define BCM2836_MBOX_CONFIG_OFFSET 0x0000001c
+#define BCM2836_MBOX_WRITE_OFFSET 0x00000020
+
+#define BCM2836_MBOX_STATUS_FULL 0x1f
+#define BCM2836_MBOX_STATUS_EMPTY 0x1e
+
+#define BCM2836_MBOX_NUM_CHANNELS 16
+
+/* interrupt controller constants */
+#define BCM2836_INTC_TIMER_CONTROL_OFFSET 0x00000040
+#define BCM2836_INTC_TIMER_PENDING_OFFSET 0x00000060
diff --git a/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836MmcHs.h b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836MmcHs.h
new file mode 100644
index 000000000000..2bd1742fcdff
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836MmcHs.h
@@ -0,0 +1,199 @@
+/** @file
+ *
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __BCM2836SDIO_H__
+#define __BCM2836SDIO_H__
+
+//MMC/SD/SDIO1 register definitions.
+#define MMCHS1BASE 0x3F300000
+
+#define MMCHS_BLK (MMCHS1BASE + 0x4)
+#define BLEN_512BYTES (0x200UL << 0)
+
+#define MMCHS_ARG (MMCHS1BASE + 0x8)
+
+#define MMCHS_CMD (MMCHS1BASE + 0xC)
+#define BCE_ENABLE BIT1
+#define DDIR_READ BIT4
+#define DDIR_WRITE (0x0UL << 4)
+#define MSBS_SGLEBLK (0x0UL << 5)
+#define MSBS_MULTBLK BIT5
+#define RSP_TYPE_MASK (0x3UL << 16)
+#define RSP_TYPE_136BITS BIT16
+#define RSP_TYPE_48BITS (0x2UL << 16)
+#define RSP_TYPE_48BUSY (0x3UL << 16)
+#define CCCE_ENABLE BIT19
+#define CICE_ENABLE BIT20
+#define DP_ENABLE BIT21
+
+#define CMD_TYPE_NORMAL 0
+#define CMD_TYPE_ABORT 3
+#define TYPE(CMD_TYPE) (((CMD_TYPE) & 0x3) << 22)
+#define _INDX(CMD_INDX) ((CMD_INDX & 0x3F) << 24)
+#define MMC_CMD_NUM(CMD) (((CMD) >> 24) & 0x3F)
+#define INDX(CMD_INDX) (TYPE(CMD_TYPE_NORMAL) | _INDX(CMD_INDX))
+#define INDX_ABORT(CMD_INDX) (TYPE(CMD_TYPE_ABORT) | _INDX(CMD_INDX))
+
+#define MMCHS_RSP10 (MMCHS1BASE + 0x10)
+#define MMCHS_RSP32 (MMCHS1BASE + 0x14)
+#define MMCHS_RSP54 (MMCHS1BASE + 0x18)
+#define MMCHS_RSP76 (MMCHS1BASE + 0x1C)
+#define MMCHS_DATA (MMCHS1BASE + 0x20)
+
+#define MMCHS_PRES_STATE (MMCHS1BASE + 0x24)
+#define CMDI_MASK BIT0
+#define CMDI_ALLOWED (0x0UL << 0)
+#define CMDI_NOT_ALLOWED BIT0
+#define DATI_MASK BIT1
+#define DATI_ALLOWED (0x0UL << 1)
+#define DATI_NOT_ALLOWED BIT1
+#define WRITE_PROTECT_OFF BIT19
+
+#define MMCHS_HCTL (MMCHS1BASE + 0x28)
+#define DTW_1_BIT (0x0UL << 1)
+#define DTW_4_BIT BIT1
+#define SDBP_MASK BIT8
+#define SDBP_OFF (0x0UL << 8)
+#define SDBP_ON BIT8
+#define SDVS_1_8_V (0x5UL << 9)
+#define SDVS_3_0_V (0x6UL << 9)
+#define IWE BIT24
+
+#define MMCHS_SYSCTL (MMCHS1BASE + 0x2C)
+#define ICE BIT0
+#define ICS_MASK BIT1
+#define ICS BIT1
+#define CEN BIT2
+#define CLKD_MASK (0x3FFUL << 6)
+#define CLKD_80KHZ (0x258UL) //(96*1000/80)/2
+#define CLKD_400KHZ (0xF0UL)
+#define CLKD_12500KHZ (0x200UL)
+#define DTO_MASK (0xFUL << 16)
+#define DTO_VAL (0xEUL << 16)
+#define SRA BIT24
+#define SRC_MASK BIT25
+#define SRC BIT25
+#define SRD BIT26
+
+#define MMCHS_INT_STAT (MMCHS1BASE + 0x30)
+#define CC BIT0
+#define TC BIT1
+#define BWR BIT4
+#define BRR BIT5
+#define CARD_INS BIT6
+#define ERRI BIT15
+#define CTO BIT16
+#define DTO BIT20
+#define DCRC BIT21
+#define DEB BIT22
+
+#define MMCHS_IE (MMCHS1BASE + 0x34)
+#define CC_EN BIT0
+#define TC_EN BIT1
+#define BWR_EN BIT4
+#define BRR_EN BIT5
+#define CTO_EN BIT16
+#define CCRC_EN BIT17
+#define CEB_EN BIT18
+#define CIE_EN BIT19
+#define DTO_EN BIT20
+#define DCRC_EN BIT21
+#define DEB_EN BIT22
+#define CERR_EN BIT28
+#define BADA_EN BIT29
+#define ALL_EN 0xFFFFFFFF
+
+#define MMCHS_ISE (MMCHS1BASE + 0x38)
+#define CC_SIGEN BIT0
+#define TC_SIGEN BIT1
+#define BWR_SIGEN BIT4
+#define BRR_SIGEN BIT5
+#define CTO_SIGEN BIT16
+#define CCRC_SIGEN BIT17
+#define CEB_SIGEN BIT18
+#define CIE_SIGEN BIT19
+#define DTO_SIGEN BIT20
+#define DCRC_SIGEN BIT21
+#define DEB_SIGEN BIT22
+#define CERR_SIGEN BIT28
+#define BADA_SIGEN BIT29
+
+#define MMCHS_AC12 (MMCHS1BASE + 0x3C)
+
+#define MMCHS_CAPA (MMCHS1BASE + 0x40)
+#define VS30 BIT25
+#define VS18 BIT26
+
+#define MMCHS_CUR_CAPA (MMCHS1BASE + 0x48)
+#define MMCHS_REV (MMCHS1BASE + 0xFC)
+
+#define BLOCK_COUNT_SHIFT 16
+#define RCA_SHIFT 16
+
+#define CMD_R1 (RSP_TYPE_48BITS | CCCE_ENABLE | CICE_ENABLE)
+#define CMD_R1B (RSP_TYPE_48BUSY | CCCE_ENABLE | CICE_ENABLE)
+#define CMD_R2 (RSP_TYPE_136BITS | CCCE_ENABLE)
+#define CMD_R3 (RSP_TYPE_48BITS)
+#define CMD_R6 (RSP_TYPE_48BITS | CCCE_ENABLE | CICE_ENABLE)
+#define CMD_R7 (RSP_TYPE_48BITS | CCCE_ENABLE | CICE_ENABLE)
+
+#define CMD_R1_ADTC (CMD_R1 | DP_ENABLE)
+#define CMD_R1_ADTC_READ (CMD_R1_ADTC | DDIR_READ)
+#define CMD_R1_ADTC_WRITE (CMD_R1_ADTC | DDIR_WRITE)
+
+#define CMD0 (INDX(0)) // Go idle
+#define CMD1 (INDX(1) | CMD_R3) // MMC: Send Op Cond
+#define CMD2 (INDX(2) | CMD_R2) // Send CID
+#define CMD3 (INDX(3) | CMD_R6) // Set Relative Addr
+#define CMD4 (INDX(4)) // Set DSR
+#define CMD5 (INDX(5) | CMD_R1B) // SDIO: Sleep/Awake
+#define CMD6 (INDX(6) | CMD_R1_ADTC_READ) // Switch
+#define CMD7 (INDX(7) | CMD_R1B) // Select/Deselect
+#define CMD8_SD (INDX(8) | CMD_R7) // Send If Cond
+#define CMD8_SD_ARG (0x0UL << 12 | BIT8 | 0xCEUL << 0)
+#define CMD8_MMC (INDX(8) | CMD_R1_ADTC_READ) // Send Ext Csd
+#define CMD8_MMC_ARG (0)
+#define CMD9 (INDX(9) | CMD_R2) // Send CSD
+#define CMD10 (INDX(10) | CMD_R2) // Send CID
+#define CMD11 (INDX(11) | CMD_R1) // Voltage Switch
+#define CMD12 (INDX_ABORT(12) | CMD_R1B) // Stop Transmission
+#define CMD13 (INDX(13) | CMD_R1) // Send Status
+#define CMD15 (INDX(15)) // Go inactive state
+#define CMD16 (INDX(16) | CMD_R1) // Set Blocklen
+#define CMD17 (INDX(17) | CMD_R1_ADTC_READ) // Read Single Block
+#define CMD18 (INDX(18) | CMD_R1_ADTC_READ | MSBS_MULTBLK) // Read Multiple Blocks
+#define CMD19 (INDX(19) | CMD_R1_ADTC_READ) // SD: Send Tuning Block (64 bytes)
+#define CMD20 (INDX(20) | CMD_R1B) // SD: Speed Class Control
+#define CMD23 (INDX(23) | CMD_R1) // Set Block Count for CMD18 and CMD25
+#define CMD24 (INDX(24) | CMD_R1_ADTC_WRITE) // Write Block
+#define CMD25 (INDX(25) | CMD_R1_ADTC_WRITE | MSBS_MULTBLK) // Write Multiple Blocks
+#define CMD55 (INDX(55) | CMD_R1) // App Cmd
+
+#define ACMD6 (INDX(6) | CMD_R1) // Set Bus Width
+#define ACMD22 (INDX(22) | CMD_R1_ADTC_READ) // SEND_NUM_WR_BLOCKS
+#define ACMD41 (INDX(41) | CMD_R3) // Send Op Cond
+#define ACMD51 (INDX(51) | CMD_R1_ADTC_READ) // Send SCR
+
+// User-friendly command names
+#define CMD_IO_SEND_OP_COND CMD5
+#define CMD_SEND_CSD CMD9 // CSD: Card-Specific Data
+#define CMD_STOP_TRANSMISSION CMD12
+#define CMD_SEND_STATUS CMD13
+#define CMD_READ_SINGLE_BLOCK CMD17
+#define CMD_READ_MULTIPLE_BLOCK CMD18
+#define CMD_SET_BLOCK_COUNT CMD23
+#define CMD_WRITE_SINGLE_BLOCK CMD24
+#define CMD_WRITE_MULTIPLE_BLOCK CMD25
+
+#endif //__BCM2836SDIO_H__
diff --git a/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836SdHost.h b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836SdHost.h
new file mode 100644
index 000000000000..fb3d6b5ccad3
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836SdHost.h
@@ -0,0 +1,92 @@
+/** @file
+ *
+ * Copyright (c) 2017, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __BCM2836SDHOST_H__
+#define __BCM2836SDHOST_H__
+
+#define SDHOST_BASE_ADDRESS (BCM2836_SOC_REGISTERS + 0x00202000)
+#define SDHOST_REG(X) (SDHOST_BASE_ADDRESS + (X))
+#define SDHOST_CMD SDHOST_REG(0x0)
+#define SDHOST_ARG SDHOST_REG(0x4)
+#define SDHOST_TOUT SDHOST_REG(0x8)
+#define SDHOST_CDIV SDHOST_REG(0xC)
+#define SDHOST_RSP0 SDHOST_REG(0x10) // [31:0]
+#define SDHOST_RSP1 SDHOST_REG(0x14) // [63:32]
+#define SDHOST_RSP2 SDHOST_REG(0x18) // [95:64]
+#define SDHOST_RSP3 SDHOST_REG(0x1C) // [127:96]
+#define SDHOST_HSTS SDHOST_REG(0x20)
+#define SDHOST_VDD SDHOST_REG(0x30)
+#define SDHOST_EDM SDHOST_REG(0x34)
+#define SDHOST_HCFG SDHOST_REG(0x38)
+#define SDHOST_HBCT SDHOST_REG(0x3C)
+#define SDHOST_DATA SDHOST_REG(0x40)
+#define SDHOST_HBLC SDHOST_REG(0x50)
+
+//
+// CMD
+//
+#define SDHOST_CMD_READ_CMD BIT6
+#define SDHOST_CMD_WRITE_CMD BIT7
+#define SDHOST_CMD_RESPONSE_CMD_LONG_RESP BIT9
+#define SDHOST_CMD_RESPONSE_CMD_NO_RESP BIT10
+#define SDHOST_CMD_BUSY_CMD BIT11
+#define SDHOST_CMD_FAIL_FLAG BIT14
+#define SDHOST_CMD_NEW_FLAG BIT15
+
+//
+// VDD
+//
+#define SDHOST_VDD_POWER_ON BIT0
+
+//
+// HSTS
+//
+#define SDHOST_HSTS_CLEAR 0x7F8
+#define SDHOST_HSTS_BLOCK_IRPT BIT9
+#define SDHOST_HSTS_REW_TIME_OUT BIT7
+#define SDHOST_HSTS_CMD_TIME_OUT BIT6
+#define SDHOST_HSTS_CRC16_ERROR BIT5
+#define SDHOST_HSTS_CRC7_ERROR BIT4
+#define SDHOST_HSTS_FIFO_ERROR BIT3
+#define SDHOST_HSTS_DATA_FLAG BIT0
+
+#define SDHOST_HSTS_TIMOUT_ERROR (SDHOST_HSTS_CMD_TIME_OUT | SDHOST_HSTS_REW_TIME_OUT)
+#define SDHOST_HSTS_TRANSFER_ERROR (SDHOST_HSTS_FIFO_ERROR | SDHOST_HSTS_CRC7_ERROR | SDHOST_HSTS_CRC16_ERROR)
+#define SDHOST_HSTS_ERROR (SDHOST_HSTS_TIMOUT_ERROR | SDHOST_HSTS_TRANSFER_ERROR)
+
+//
+// HCFG
+//
+#define SDHOST_HCFG_SLOW_CARD BIT3
+#define SDHOST_HCFG_WIDE_EXT_BUS BIT2
+#define SDHOST_HCFG_WIDE_INT_BUS BIT1
+#define SDHOST_HCFG_DATA_IRPT_EN BIT4
+#define SDHOST_HCFG_BLOCK_IRPT_EN BIT8
+#define SDHOST_HCFG_BUSY_IRPT_EN BIT10
+
+//
+// EDM
+//
+#define SDHOST_EDM_FIFO_CLEAR BIT21
+#define SDHOST_EDM_WRITE_THRESHOLD_SHIFT 9
+#define SDHOST_EDM_READ_THRESHOLD_SHIFT 14
+#define SDHOST_EDM_THRESHOLD_MASK 0x1F
+#define SDHOST_EDM_READ_THRESHOLD(X) ((X) << SDHOST_EDM_READ_THRESHOLD_SHIFT)
+#define SDHOST_EDM_WRITE_THRESHOLD(X) ((X) << SDHOST_EDM_WRITE_THRESHOLD_SHIFT)
+
+#define CMD8_SD_ARG (0x0UL << 12 | BIT8 | 0xCEUL << 0)
+#define CMD8_MMC_ARG (0)
+
+#endif //__BCM2836SDHOST_H__
diff --git a/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2837Gpio.h b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2837Gpio.h
new file mode 100644
index 000000000000..27e6665f1745
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2837Gpio.h
@@ -0,0 +1,50 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __BCM2837GPIO_H__
+#define __BCM2837GPIO_H__
+
+#define GPIO_BASE_ADDRESS (BCM2836_SOC_REGISTERS + 0x00200000)
+
+#define GPIO_GPFSEL0 (GPIO_BASE_ADDRESS + 0x00)
+#define GPIO_GPFSEL1 (GPIO_BASE_ADDRESS + 0x04)
+#define GPIO_GPFSEL2 (GPIO_BASE_ADDRESS + 0x08)
+#define GPIO_GPFSEL3 (GPIO_BASE_ADDRESS + 0x0C)
+#define GPIO_GPFSEL4 (GPIO_BASE_ADDRESS + 0x10)
+#define GPIO_GPFSEL5 (GPIO_BASE_ADDRESS + 0x14)
+
+#define GPIO_GPCLR0 (GPIO_BASE_ADDRESS + 0x28)
+#define GPIO_GPCLR1 (GPIO_BASE_ADDRESS + 0x2C)
+
+#define GPIO_GPSET0 (GPIO_BASE_ADDRESS + 0x1C)
+#define GPIO_GPSET1 (GPIO_BASE_ADDRESS + 0x20)
+
+#define GPIO_FSEL_INPUT 0x0
+#define GPIO_FSEL_OUTPUT 0x1
+#define GPIO_FSEL_ALT0 0x4
+#define GPIO_FSEL_ALT1 0x5
+#define GPIO_FSEL_ALT2 0x6
+#define GPIO_FSEL_ALT3 0x7
+#define GPIO_FSEL_ALT4 0x3
+#define GPIO_FSEL_ALT5 0x2
+
+#define GPIO_FSEL_PINS_PER_REGISTER 10
+#define GPIO_FSEL_BITS_PER_PIN 3
+#define GPIO_FSEL_MASK ((1 << GPIO_FSEL_BITS_PER_PIN) - 1)
+
+#define GPIO_PINS 54
+
+#endif // __BCM2837GPIO_H__
+
diff --git a/Platform/Broadcom/Bcm283x/Include/IndustryStandard/RpiFirmware.h b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/RpiFirmware.h
new file mode 100644
index 000000000000..83f8633c26cf
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/IndustryStandard/RpiFirmware.h
@@ -0,0 +1,93 @@
+/** @file
+ *
+ * Copyright (c) 2016, Linaro Limited. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **/
+
+#define RPI_FW_MBOX_CHANNEL 0x00000008
+
+#define RPI_FW_RESP_SUCCESS 0x80000000
+#define RPI_FW_RESP_FAILURE 0x80000001
+
+#define RPI_FW_VALUE_SIZE_RESPONSE_MASK BIT31
+
+#define RPI_FW_GET_REVISION 0x00000001
+#define RPI_FW_GET_BOARD_MODEL 0x00010001
+#define RPI_FW_GET_BOARD_REVISION 0x00010002
+#define RPI_FW_GET_MAC_ADDRESS 0x00010003
+#define RPI_FW_GET_BOARD_SERIAL 0x00010004
+#define RPI_FW_GET_ARM_MEMSIZE 0x00010005
+
+#define RPI_FW_SET_POWER_STATE 0x00028001
+
+#define RPI_FW_POWER_STATE_SDHCI 0x00000000
+#define RPI_FW_POWER_STATE_UART0 0x00000001
+#define RPI_FW_POWER_STATE_UART1 0x00000002
+#define RPI_FW_POWER_STATE_USB_HCD 0x00000003
+#define RPI_FW_POWER_STATE_I2C0 0x00000004
+#define RPI_FW_POWER_STATE_I2C1 0x00000005
+#define RPI_FW_POWER_STATE_I2C2 0x00000006
+#define RPI_FW_POWER_STATE_SPI 0x00000007
+#define RPI_FW_POWER_STATE_CCP2TX 0x00000008
+
+#define RPI_FW_GET_CLOCK_RATE 0x00030002
+#define RPI_FW_GET_MAX_CLOCK_RATE 0x00030004
+#define RPI_FW_GET_MIN_CLOCK_RATE 0x00030007
+
+#define RPI_FW_SET_CLOCK_RATE 0x00038002
+#define RPI_FW_SET_GPIO 0x00038041
+
+#define RPI_FW_GET_FB_GEOMETRY 0x00040003
+#define RPI_FW_GET_FB_LINELENGTH 0x00040008
+#define RPI_FW_GET_FB_COLOR_DEPTH 0x00040005
+#define RPI_FW_GET_FB_REGION 0x00040001
+
+#define RPI_FW_SET_FB_PGEOM 0x00048003
+#define RPI_FW_SET_FB_VGEOM 0x00048004
+#define RPI_FW_SET_FB_DEPTH 0x00048005
+#define RPI_FW_ALLOC_FB 0x00040001
+#define RPI_FW_FREE_FB 0x00048001
+
+#define RPI_FW_GET_COMMAND_LINE 0x00050001
+
+#define RPI_FW_POWER_STATE_ENABLE BIT0
+#define RPI_FW_POWER_STATE_WAIT BIT1
+
+#define RPI_FW_CLOCK_RATE_EMMC 0x000000001
+#define RPI_FW_CLOCK_RATE_UART 0x000000002
+#define RPI_FW_CLOCK_RATE_ARM 0x000000003
+#define RPI_FW_CLOCK_RATE_CORE 0x000000004
+#define RPI_FW_CLOCK_RATE_V3D 0x000000005
+#define RPI_FW_CLOCK_RATE_H264 0x000000006
+#define RPI_FW_CLOCK_RATE_ISP 0x000000007
+#define RPI_FW_CLOCK_RATE_SDRAM 0x000000008
+#define RPI_FW_CLOCK_RATE_PIXEL 0x000000009
+#define RPI_FW_CLOCK_RATE_PWM 0x00000000a
+
+#define RPI_FB_MBOX_CHANNEL 0x1
diff --git a/Platform/Broadcom/Bcm283x/Include/Library/GpioLib.h b/Platform/Broadcom/Bcm283x/Include/Library/GpioLib.h
new file mode 100644
index 000000000000..ca9da4b11a87
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/Library/GpioLib.h
@@ -0,0 +1,33 @@
+/** @file
+ *
+ * GPIO manipulation.
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __GPIO_LIB__
+#define __GPIO_LIB__
+
+#include <IndustryStandard/Bcm2837Gpio.h>
+
+VOID
+GpioPinFuncSet(
+ IN UINTN Pin,
+ IN UINTN Function
+ );
+
+UINTN
+GpioPinFuncGet(
+ IN UINTN Pin
+ );
+
+#endif /* __GPIO_LIB__ */
diff --git a/Platform/Broadcom/Bcm283x/Include/Protocol/DwUsb.h b/Platform/Broadcom/Bcm283x/Include/Protocol/DwUsb.h
new file mode 100644
index 000000000000..dfad80c719e1
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/Protocol/DwUsb.h
@@ -0,0 +1,53 @@
+/** @file
+ *
+ * Copyright (c) 2015-2016, Linaro. All rights reserved.
+ * Copyright (c) 2015-2016, Hisilicon Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __DW_USB_H__
+#define __DW_USB_H__
+
+//
+// Protocol GUID
+//
+#define DW_USB_PROTOCOL_GUID { 0x109fa264, 0x7811, 0x4862, { 0xa9, 0x73, 0x4a, 0xb2, 0xef, 0x2e, 0xe2, 0xff }}
+
+//
+// Protocol interface structure
+//
+typedef struct _DW_USB_PROTOCOL DW_USB_PROTOCOL;
+
+#define USB_HOST_MODE 0
+#define USB_DEVICE_MODE 1
+#define USB_CABLE_NOT_ATTACHED 2
+
+typedef
+EFI_STATUS
+(EFIAPI *DW_USB_GET_SERIAL_NO) (
+ OUT CHAR16 *SerialNo,
+ OUT UINT8 *Length
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *DW_USB_PHY_INIT) (
+ IN UINT8 Mode
+ );
+
+struct _DW_USB_PROTOCOL {
+ DW_USB_GET_SERIAL_NO Get;
+ DW_USB_PHY_INIT PhyInit;
+};
+
+extern EFI_GUID gDwUsbProtocolGuid;
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/Include/Protocol/ExtendedTextOut.h b/Platform/Broadcom/Bcm283x/Include/Protocol/ExtendedTextOut.h
new file mode 100644
index 000000000000..35e82a17e922
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/Protocol/ExtendedTextOut.h
@@ -0,0 +1,36 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __EXTENDED_TEXT_OUT_H__
+#define __EXTENDED_TEXT_OUT_H__
+
+#include <Protocol/SimpleTextOut.h>
+#include <Protocol/GraphicsOutput.h>
+
+#define EXTENDED_TEXT_OUTPUT_PROTOCOL_GUID \
+ { \
+ 0x387477ff, 0xffc7, 0xffd2, {0x8e, 0x39, 0x0, 0xff, 0xc9, 0x69, 0x72, 0x3b } \
+ }
+
+typedef struct _EXTENDED_TEXT_OUTPUT_PROTOCOL EXTENDED_TEXT_OUTPUT_PROTOCOL;
+
+struct _EXTENDED_TEXT_OUTPUT_PROTOCOL {
+ EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *TextOut;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ BOOLEAN AutoWrap;
+};
+
+extern EFI_GUID gExtendedTextOutputProtocolGuid;
+
+#endif /* __EXTENDED_TEXT_OUT__ */
diff --git a/Platform/Broadcom/Bcm283x/Include/Protocol/PiMmcHost.h b/Platform/Broadcom/Bcm283x/Include/Protocol/PiMmcHost.h
new file mode 100644
index 000000000000..c0e65687e8d4
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/Protocol/PiMmcHost.h
@@ -0,0 +1,187 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2011-2014, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __PI_MMC_HOST_H__
+#define __PI_MMC_HOST_H__
+
+///
+/// Global ID for the MMC Host Protocol
+///
+#define RASPBERRY_PI_MMC_HOST_PROTOCOL_GUID \
+ { 0x3e591c00, 0x9e4a, 0x11df, {0x92, 0x44, 0x00, 0x02, 0xA5, 0xF5, 0xF5, 0x1B } }
+
+#define MMC_RESPONSE_TYPE_R1 0
+#define MMC_RESPONSE_TYPE_R1b 0
+#define MMC_RESPONSE_TYPE_R2 1
+#define MMC_RESPONSE_TYPE_R3 0
+#define MMC_RESPONSE_TYPE_R6 0
+#define MMC_RESPONSE_TYPE_R7 0
+#define MMC_RESPONSE_TYPE_OCR 0
+#define MMC_RESPONSE_TYPE_CID 1
+#define MMC_RESPONSE_TYPE_CSD 1
+#define MMC_RESPONSE_TYPE_RCA 0
+
+typedef UINT32 MMC_RESPONSE_TYPE;
+
+typedef UINT32 MMC_CMD;
+
+#define MMC_CMD_WAIT_RESPONSE (1 << 16)
+#define MMC_CMD_LONG_RESPONSE (1 << 17)
+#define MMC_CMD_NO_CRC_RESPONSE (1 << 18)
+
+#define MMC_INDX(Index) ((Index) & 0xFFFF)
+#define MMC_GET_INDX(MmcCmd) ((MmcCmd) & 0xFFFF)
+
+#define MMC_CMD0 (MMC_INDX(0) | MMC_CMD_NO_CRC_RESPONSE)
+#define MMC_CMD1 (MMC_INDX(1) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
+#define MMC_CMD2 (MMC_INDX(2) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_LONG_RESPONSE)
+#define MMC_CMD3 (MMC_INDX(3) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD5 (MMC_INDX(5) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
+#define MMC_CMD6 (MMC_INDX(6) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD7 (MMC_INDX(7) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD8 (MMC_INDX(8) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD9 (MMC_INDX(9) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_LONG_RESPONSE)
+#define MMC_CMD11 (MMC_INDX(11) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD12 (MMC_INDX(12) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD13 (MMC_INDX(13) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD16 (MMC_INDX(16) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD17 (MMC_INDX(17) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD18 (MMC_INDX(18) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD20 (MMC_INDX(20) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD23 (MMC_INDX(23) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD24 (MMC_INDX(24) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD25 (MMC_INDX(25) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD55 (MMC_INDX(55) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_ACMD22 (MMC_INDX(22) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_ACMD41 (MMC_INDX(41) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
+#define MMC_ACMD51 (MMC_INDX(51) | MMC_CMD_WAIT_RESPONSE)
+
+// Valid responses for CMD1 in eMMC
+#define EMMC_CMD1_CAPACITY_LESS_THAN_2GB 0x00FF8080 // Capacity <= 2GB, byte addressing used
+#define EMMC_CMD1_CAPACITY_GREATER_THAN_2GB 0x40FF8080 // Capacity > 2GB, 512-byte sector addressing used
+
+#define MMC_STATUS_APP_CMD (1 << 5)
+
+typedef enum _MMC_STATE {
+ MmcInvalidState = 0,
+ MmcHwInitializationState,
+ MmcIdleState,
+ MmcReadyState,
+ MmcIdentificationState,
+ MmcStandByState,
+ MmcTransferState,
+ MmcSendingDataState,
+ MmcReceiveDataState,
+ MmcProgrammingState,
+ MmcDisconnectState,
+} MMC_STATE;
+
+#define EMMCBACKWARD (0)
+#define EMMCHS26 (1 << 0) // High-Speed @26MHz at rated device voltages
+#define EMMCHS52 (1 << 1) // High-Speed @52MHz at rated device voltages
+#define EMMCHS52DDR1V8 (1 << 2) // High-Speed Dual Data Rate @52MHz 1.8V or 3V I/O
+#define EMMCHS52DDR1V2 (1 << 3) // High-Speed Dual Data Rate @52MHz 1.2V I/O
+#define EMMCHS200SDR1V8 (1 << 4) // HS200 Single Data Rate @200MHz 1.8V I/O
+#define EMMCHS200SDR1V2 (1 << 5) // HS200 Single Data Rate @200MHz 1.2V I/O
+#define EMMCHS400DDR1V8 (1 << 6) // HS400 Dual Data Rate @400MHz 1.8V I/O
+#define EMMCHS400DDR1V2 (1 << 7) // HS400 Dual Data Rate @400MHz 1.2V I/O
+
+///
+/// Forward declaration for EFI_MMC_HOST_PROTOCOL
+///
+typedef struct _EFI_MMC_HOST_PROTOCOL EFI_MMC_HOST_PROTOCOL;
+
+typedef BOOLEAN (EFIAPI *MMC_ISCARDPRESENT) (
+ IN EFI_MMC_HOST_PROTOCOL *This
+ );
+
+typedef BOOLEAN (EFIAPI *MMC_ISREADONLY) (
+ IN EFI_MMC_HOST_PROTOCOL *This
+ );
+
+typedef EFI_STATUS (EFIAPI *MMC_BUILDDEVICEPATH) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+typedef EFI_STATUS (EFIAPI *MMC_NOTIFYSTATE) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_STATE State
+ );
+
+typedef EFI_STATUS (EFIAPI *MMC_SENDCOMMAND) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_CMD Cmd,
+ IN UINT32 Argument
+ );
+
+typedef EFI_STATUS (EFIAPI *MMC_RECEIVERESPONSE) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN MMC_RESPONSE_TYPE Type,
+ IN UINT32 *Buffer
+ );
+
+typedef EFI_STATUS (EFIAPI *MMC_READBLOCKDATA) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Length,
+ OUT UINT32 *Buffer
+ );
+
+typedef EFI_STATUS (EFIAPI *MMC_WRITEBLOCKDATA) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Length,
+ IN UINT32 *Buffer
+ );
+
+typedef EFI_STATUS (EFIAPI *MMC_SETIOS) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN UINT32 BusClockFreq,
+ IN UINT32 BusWidth,
+ IN UINT32 TimingMode
+ );
+
+typedef BOOLEAN (EFIAPI *MMC_ISMULTIBLOCK) (
+ IN EFI_MMC_HOST_PROTOCOL *This
+ );
+
+struct _EFI_MMC_HOST_PROTOCOL {
+ UINT32 Revision;
+ MMC_ISCARDPRESENT IsCardPresent;
+ MMC_ISREADONLY IsReadOnly;
+ MMC_BUILDDEVICEPATH BuildDevicePath;
+
+ MMC_NOTIFYSTATE NotifyState;
+
+ MMC_SENDCOMMAND SendCommand;
+ MMC_RECEIVERESPONSE ReceiveResponse;
+
+ MMC_READBLOCKDATA ReadBlockData;
+ MMC_WRITEBLOCKDATA WriteBlockData;
+
+ MMC_SETIOS SetIos;
+ MMC_ISMULTIBLOCK IsMultiBlock;
+};
+
+#define MMC_HOST_PROTOCOL_REVISION 0x00010002 // 1.2
+
+#define MMC_HOST_HAS_SETIOS(Host) (Host->Revision >= MMC_HOST_PROTOCOL_REVISION && \
+ Host->SetIos != NULL)
+#define MMC_HOST_HAS_ISMULTIBLOCK(Host) (Host->Revision >= MMC_HOST_PROTOCOL_REVISION && \
+ Host->IsMultiBlock != NULL)
+
+#endif
+
diff --git a/Platform/Broadcom/Bcm283x/Include/Protocol/RaspberryPiFirmware.h b/Platform/Broadcom/Bcm283x/Include/Protocol/RaspberryPiFirmware.h
new file mode 100644
index 000000000000..2a4247584641
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/Protocol/RaspberryPiFirmware.h
@@ -0,0 +1,131 @@
+/** @file
+ *
+ * Copyright (c) 2016, Linaro Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef __RASPBERRY_PI_FIRMWARE_PROTOCOL_H__
+#define __RASPBERRY_PI_FIRMWARE_PROTOCOL_H__
+
+#define RASPBERRY_PI_FIRMWARE_PROTOL_GUID \
+ { 0x0ACA9535, 0x7AD0, 0x4286, { 0xB0, 0x2E, 0x87, 0xFA, 0x7E, 0x2A, 0x57, 0x11 } }
+
+typedef
+EFI_STATUS
+(EFIAPI *SET_POWER_STATE) (
+ IN UINT32 DeviceId,
+ IN BOOLEAN PowerState,
+ IN BOOLEAN Wait
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_MAC_ADDRESS) (
+ OUT UINT8 MacAddress[6]
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_COMMAND_LINE) (
+ IN UINTN BufferSize,
+ OUT CHAR8 CommandLine[]
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_CLOCK_RATE) (
+ IN UINT32 ClockId,
+ OUT UINT32 *ClockRate
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *SET_CLOCK_RATE) (
+ IN UINT32 ClockId,
+ OUT UINT32 ClockRate
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_FB) (
+ IN UINT32 Width,
+ IN UINT32 Height,
+ IN UINT32 Depth,
+ OUT EFI_PHYSICAL_ADDRESS *FbBase,
+ OUT UINTN *FbSize,
+ OUT UINTN *Pitch
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_FB_SIZE) (
+ OUT UINT32 *Width,
+ OUT UINT32 *Height
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *FREE_FB) (
+ VOID
+ );
+
+typedef
+VOID
+(EFIAPI *SET_LED) (
+ BOOLEAN On
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_SERIAL) (
+ UINT64 *Serial
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_MODEL) (
+ UINT32 *Model
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_MODEL_REVISION) (
+ UINT32 *Revision
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *GET_ARM_MEM) (
+ UINT32 *Base,
+ UINT32 *Size
+ );
+
+typedef struct {
+ SET_POWER_STATE SetPowerState;
+ GET_MAC_ADDRESS GetMacAddress;
+ GET_COMMAND_LINE GetCommandLine;
+ GET_CLOCK_RATE GetClockRate;
+ GET_CLOCK_RATE GetMaxClockRate;
+ GET_CLOCK_RATE GetMinClockRate;
+ SET_CLOCK_RATE SetClockRate;
+ GET_FB GetFB;
+ FREE_FB FreeFB;
+ GET_FB_SIZE GetFBSize;
+ SET_LED SetLed;
+ GET_SERIAL GetSerial;
+ GET_MODEL GetModel;
+ GET_MODEL_REVISION GetModelRevision;
+ GET_ARM_MEM GetArmMem;
+} RASPBERRY_PI_FIRMWARE_PROTOCOL;
+
+extern EFI_GUID gRaspberryPiFirmwareProtocolGuid;
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/Include/Utils.h b/Platform/Broadcom/Bcm283x/Include/Utils.h
new file mode 100644
index 000000000000..47713275de3f
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Include/Utils.h
@@ -0,0 +1,33 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef UTILS_H
+#define UTILS_H
+
+#define _IX_BITS(sm, bg) ((bg) - (sm) + 1)
+#define _IX_MASK(sm, bg) ((1ul << _IX_BITS((sm), (bg))) - 1)
+#define _X(val, sm, bg) ((val) >> (sm)) & _IX_MASK((sm), (bg))
+#define X(val, ix1, ix2) (((ix1) < (ix2)) ? _X((val), (ix1), (ix2)) : \
+ _X((val), (ix2), (ix1)))
+
+#define _I(val, sm, bg) (((val) & _IX_MASK((sm), (bg))) << (sm))
+#define I(val, ix1, ix2) (((ix1) < (ix2)) ? _I((val), (ix1), (ix2)) : \
+ _I((val), (ix2), (ix1)))
+#define _M(val, sm, bg) ((val) & (_IX_MASK((sm), (bg)) << (sm)))
+#define M(val, ix1, ix2) (((ix1) < (ix2)) ? _M((val), (ix1), (ix2)) : \
+ _M((val), (ix2), (ix1)))
+
+#define ELES(x) (sizeof((x)) / sizeof((x)[0]))
+
+#endif /* UTILS_H */
diff --git a/Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c b/Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c
new file mode 100644
index 000000000000..db38acefb7c3
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c
@@ -0,0 +1,79 @@
+/** @file
+ *
+ * GPIO manipulation.
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Uefi.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/GpioLib.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <Utils.h>
+
+STATIC VOID
+GpioFSELModify(
+ IN UINTN RegIndex,
+ IN UINT32 ModifyMask,
+ IN UINT32 FunctionMask
+ )
+{
+ UINT32 Val;
+ EFI_PHYSICAL_ADDRESS Reg = RegIndex * sizeof(UINT32) + GPIO_GPFSEL0;
+
+ ASSERT(Reg <= GPIO_GPFSEL5);
+ ASSERT((~ModifyMask & FunctionMask) == 0);
+
+ Val = MmioRead32(Reg);
+ Val &= ~ModifyMask;
+ Val |= FunctionMask;
+ MmioWrite32(Reg, Val);
+}
+
+VOID
+GpioPinFuncSet(
+ IN UINTN Pin,
+ IN UINTN Function
+ )
+{
+ UINTN RegIndex = Pin / 10;
+ UINTN SelIndex = Pin % 10;
+ UINT32 ModifyMask;
+ UINT32 FunctionMask;
+
+ ASSERT(Pin < GPIO_PINS);
+ ASSERT(Function <= GPIO_FSEL_MASK);
+
+ ModifyMask = GPIO_FSEL_MASK << (SelIndex * GPIO_FSEL_BITS_PER_PIN);
+ FunctionMask = Function << (SelIndex * GPIO_FSEL_BITS_PER_PIN);
+ GpioFSELModify(RegIndex, ModifyMask, FunctionMask);
+}
+
+UINTN
+GpioPinFuncGet(
+ IN UINTN Pin
+ )
+{
+ UINT32 Val;
+ UINTN RegIndex = Pin / 10;
+ UINTN SelIndex = Pin % 10;
+ EFI_PHYSICAL_ADDRESS Reg = RegIndex * sizeof(UINT32) + GPIO_GPFSEL0;
+
+ ASSERT(Pin < GPIO_PINS);
+
+ Val = MmioRead32(Reg);
+ Val >>= SelIndex * GPIO_FSEL_BITS_PER_PIN;
+ Val &= GPIO_FSEL_MASK;
+ return Val;
+}
diff --git a/Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.inf b/Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.inf
new file mode 100644
index 000000000000..82114568b0a6
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.inf
@@ -0,0 +1,39 @@
+#/** @file
+#
+# Manipulate GPIOs.
+#
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = GpioLib
+ FILE_GUID = B9F59B6B-B105-41C7-8F5A-2C60DD7FD7AB
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = GpioLib
+
+[Sources]
+ GpioLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
+
+[Guids]
diff --git a/Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.c b/Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
new file mode 100644
index 000000000000..81d810b5d428
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
@@ -0,0 +1,183 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <PiPei.h>
+
+#include <Library/ArmMmuLib.h>
+#include <Library/ArmPlatformLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+
+extern UINT64 mSystemMemoryEnd;
+
+VOID
+BuildMemoryTypeInformationHob (
+ VOID
+ );
+
+STATIC
+VOID
+InitMmu (
+ IN ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable
+ )
+{
+
+ VOID *TranslationTableBase;
+ UINTN TranslationTableSize;
+ RETURN_STATUS Status;
+
+ //Note: Because we called PeiServicesInstallPeiMemory() before to call InitMmu() the MMU Page Table resides in
+ // DRAM (even at the top of DRAM as it is the first permanent memory allocation)
+ Status = ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Error: Failed to enable MMU\n"));
+ }
+}
+
+STATIC
+VOID
+AddAndRTSData(ARM_MEMORY_REGION_DESCRIPTOR *Desc)
+{
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ EFI_RESOURCE_ATTRIBUTE_PRESENT |
+ EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_TESTED,
+ Desc->PhysicalBase,
+ Desc->Length
+ );
+
+ BuildMemoryAllocationHob (
+ Desc->PhysicalBase,
+ Desc->Length,
+ EfiRuntimeServicesData
+ );
+}
+
+STATIC
+VOID
+AddAndReserved(ARM_MEMORY_REGION_DESCRIPTOR *Desc)
+{
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ EFI_RESOURCE_ATTRIBUTE_PRESENT |
+ EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_TESTED,
+ Desc->PhysicalBase,
+ Desc->Length
+ );
+
+ BuildMemoryAllocationHob (
+ Desc->PhysicalBase,
+ Desc->Length,
+ EfiReservedMemoryType
+ );
+}
+
+STATIC
+VOID
+AddAndMmio(ARM_MEMORY_REGION_DESCRIPTOR *Desc)
+{
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ (EFI_RESOURCE_ATTRIBUTE_PRESENT |
+ EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+ EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_TESTED),
+ Desc->PhysicalBase,
+ Desc->Length
+ );
+
+ BuildMemoryAllocationHob (
+ Desc->PhysicalBase,
+ Desc->Length,
+ EfiMemoryMappedIO
+ );
+}
+
+/*++
+
+Routine Description:
+
+
+
+Arguments:
+
+ FileHandle - Handle of the file being invoked.
+ PeiServices - Describes the list of possible PEI Services.
+
+Returns:
+
+ Status - EFI_SUCCESS if the boot mode could be set
+
+--*/
+EFI_STATUS
+EFIAPI
+MemoryPeim (
+ IN EFI_PHYSICAL_ADDRESS UefiMemoryBase,
+ IN UINT64 UefiMemorySize
+ )
+{
+ ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
+
+ // Get Virtual Memory Map from the Platform Library
+ ArmPlatformGetVirtualMemoryMap (&MemoryTable);
+
+ // Ensure PcdSystemMemorySize has been set
+ ASSERT (PcdGet64 (PcdSystemMemorySize) != 0);
+
+ // FD without variable store
+ AddAndReserved(&MemoryTable[0]);
+
+ // Variable store.
+ AddAndRTSData(&MemoryTable[1]);
+
+ // Trusted Firmware region
+ AddAndReserved(&MemoryTable[2]);
+
+ // Usable memory.
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ EFI_RESOURCE_ATTRIBUTE_PRESENT |
+ EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_TESTED,
+ MemoryTable[3].PhysicalBase,
+ MemoryTable[3].Length
+ );
+
+ AddAndReserved(&MemoryTable[4]);
+ AddAndMmio(&MemoryTable[5]);
+
+ // Build Memory Allocation Hob
+ InitMmu (MemoryTable);
+
+ if (FeaturePcdGet (PcdPrePiProduceMemoryTypeInformationHob)) {
+ // Optional feature that helps prevent EFI memory map fragmentation.
+ BuildMemoryTypeInformationHob ();
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf b/Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
new file mode 100644
index 000000000000..9f5204a210de
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
@@ -0,0 +1,51 @@
+#/** @file
+#
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+# Copyright (c) 2011-2014, ARM Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = MemoryInitPeiLib
+ FILE_GUID = 4bbc9c10-a100-43fb-8311-332ba497d1b4
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = MemoryInitPeiLib|SEC PEIM
+
+[Sources]
+ MemoryInitPeiLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+
+[LibraryClasses]
+ DebugLib
+ HobLib
+ ArmMmuLib
+ ArmPlatformLib
+
+[Guids]
+ gEfiMemoryTypeInformationGuid
+
+[FeaturePcd]
+ gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdSystemMemoryBase
+ gArmTokenSpaceGuid.PcdSystemMemorySize
+
+[Depex]
+ TRUE
diff --git a/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.c b/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.c
new file mode 100644
index 000000000000..58eeb117c769
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.c
@@ -0,0 +1,831 @@
+/** @file
+ *
+ * Copyright (c) 2018, Pete Batard <pete@akeo.ie>
+ * Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2016, Linaro Ltd. All rights reserved.
+ * Copyright (c) 2015-2016, Red Hat, Inc.
+ * Copyright (c) 2014, ARM Ltd. All rights reserved.
+ * Copyright (c) 2004-2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Library/BootLogoLib.h>
+#include <Library/CapsuleLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootManagerLib.h>
+#include <Library/UefiLib.h>
+#include <Library/PrintLib.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/EsrtManagement.h>
+#include <Protocol/GraphicsOutput.h>
+#include <Protocol/LoadedImage.h>
+#include <Guid/EventGroup.h>
+#include <Guid/TtyTerm.h>
+#include <Protocol/BootLogo.h>
+
+#include "PlatformBm.h"
+
+#define BOOT_PROMPT L"ESC (setup), F1 (shell), ENTER (boot)"
+
+#define DP_NODE_LEN(Type) { (UINT8)sizeof (Type), (UINT8)(sizeof (Type) >> 8) }
+
+#pragma pack (1)
+typedef struct {
+ VENDOR_DEVICE_PATH SerialDxe;
+ UART_DEVICE_PATH Uart;
+ VENDOR_DEFINED_DEVICE_PATH TermType;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} PLATFORM_SERIAL_CONSOLE;
+#pragma pack ()
+
+typedef struct {
+ VENDOR_DEVICE_PATH Custom;
+ USB_DEVICE_PATH Hub;
+ USB_DEVICE_PATH Dev;
+ EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
+} PLATFORM_USB_DEV;
+
+typedef struct {
+ VENDOR_DEVICE_PATH Custom;
+ EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
+} PLATFORM_SD_DEV;
+
+#define DW_USB_DXE_FILE_GUID { \
+ 0x4bf1704c, 0x03f4, 0x46d5, \
+ { 0xbc, 0xa6, 0x82, 0xfa, 0x58, 0x0b, 0xad, 0xfd } \
+ }
+
+#define ARASAN_MMC_DXE_FILE_GUID { \
+ 0x100c2cfa, 0xb586, 0x4198, \
+ { 0x9b, 0x4c, 0x16, 0x83, 0xd1, 0x95, 0xb1, 0xda } \
+ }
+
+#define SDHOST_MMC_DXE_FILE_GUID { \
+ 0x58abd787, 0xf64d, 0x4ca2, \
+ { 0xa0, 0x34, 0xb9, 0xac, 0x2d, 0x5a, 0xd0, 0xcf } \
+ }
+
+STATIC PLATFORM_SD_DEV mArasan = {
+ //
+ // VENDOR_DEVICE_PATH ArasanMMCHostDxe
+ //
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, DP_NODE_LEN (VENDOR_DEVICE_PATH) },
+ ARASAN_MMC_DXE_FILE_GUID
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+STATIC PLATFORM_SD_DEV mSDHost = {
+ //
+ // VENDOR_DEVICE_PATH SdHostDxe
+ //
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, DP_NODE_LEN (VENDOR_DEVICE_PATH) },
+ SDHOST_MMC_DXE_FILE_GUID
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+STATIC PLATFORM_USB_DEV mUsbHubPort = {
+ //
+ // VENDOR_DEVICE_PATH DwUsbHostDxe
+ //
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, DP_NODE_LEN (VENDOR_DEVICE_PATH) },
+ DW_USB_DXE_FILE_GUID
+ },
+
+ //
+ // USB_DEVICE_PATH Hub
+ //
+ {
+ { MESSAGING_DEVICE_PATH, MSG_USB_DP, DP_NODE_LEN (USB_DEVICE_PATH) },
+ 0, 0
+ },
+
+ //
+ // USB_DEVICE_PATH Dev
+ //
+ {
+ { MESSAGING_DEVICE_PATH, MSG_USB_DP, DP_NODE_LEN (USB_DEVICE_PATH) },
+ 1, 0
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+#define SERIAL_DXE_FILE_GUID { \
+ 0xD3987D4B, 0x971A, 0x435F, \
+ { 0x8C, 0xAF, 0x49, 0x67, 0xEB, 0x62, 0x72, 0x41 } \
+ }
+
+STATIC PLATFORM_SERIAL_CONSOLE mSerialConsole = {
+ //
+ // VENDOR_DEVICE_PATH SerialDxe
+ //
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, DP_NODE_LEN (VENDOR_DEVICE_PATH) },
+ SERIAL_DXE_FILE_GUID
+ },
+
+ //
+ // UART_DEVICE_PATH Uart
+ //
+ {
+ { MESSAGING_DEVICE_PATH, MSG_UART_DP, DP_NODE_LEN (UART_DEVICE_PATH) },
+ 0, // Reserved
+ FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate
+ FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits
+ FixedPcdGet8 (PcdUartDefaultParity), // Parity
+ FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits
+ },
+
+ //
+ // VENDOR_DEFINED_DEVICE_PATH TermType
+ //
+ {
+ {
+ MESSAGING_DEVICE_PATH, MSG_VENDOR_DP,
+ DP_NODE_LEN (VENDOR_DEFINED_DEVICE_PATH)
+ }
+ //
+ // Guid to be filled in dynamically
+ //
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+
+#pragma pack (1)
+typedef struct {
+ USB_CLASS_DEVICE_PATH Keyboard;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} PLATFORM_USB_KEYBOARD;
+#pragma pack ()
+
+STATIC PLATFORM_USB_KEYBOARD mUsbKeyboard = {
+ //
+ // USB_CLASS_DEVICE_PATH Keyboard
+ //
+ {
+ {
+ MESSAGING_DEVICE_PATH, MSG_USB_CLASS_DP,
+ DP_NODE_LEN (USB_CLASS_DEVICE_PATH)
+ },
+ 0xFFFF, // VendorId: any
+ 0xFFFF, // ProductId: any
+ 3, // DeviceClass: HID
+ 1, // DeviceSubClass: boot
+ 1 // DeviceProtocol: keyboard
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+STATIC EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *mSerialConProtocol;
+
+/**
+ Check if the handle satisfies a particular condition.
+
+ @param[in] Handle The handle to check.
+ @param[in] ReportText A caller-allocated string passed in for reporting
+ purposes. It must never be NULL.
+
+ @retval TRUE The condition is satisfied.
+ @retval FALSE Otherwise. This includes the case when the condition could not
+ be fully evaluated due to an error.
+**/
+typedef
+BOOLEAN
+(EFIAPI *FILTER_FUNCTION) (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ );
+
+
+/**
+ Process a handle.
+
+ @param[in] Handle The handle to process.
+ @param[in] ReportText A caller-allocated string passed in for reporting
+ purposes. It must never be NULL.
+**/
+typedef
+VOID
+(EFIAPI *CALLBACK_FUNCTION) (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ );
+
+/**
+ Locate all handles that carry the specified protocol, filter them with a
+ callback function, and pass each handle that passes the filter to another
+ callback.
+
+ @param[in] ProtocolGuid The protocol to look for.
+
+ @param[in] Filter The filter function to pass each handle to. If this
+ parameter is NULL, then all handles are processed.
+
+ @param[in] Process The callback function to pass each handle to that
+ clears the filter.
+**/
+STATIC
+VOID
+FilterAndProcess (
+ IN EFI_GUID *ProtocolGuid,
+ IN FILTER_FUNCTION Filter OPTIONAL,
+ IN CALLBACK_FUNCTION Process
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE *Handles;
+ UINTN NoHandles;
+ UINTN Idx;
+
+ Status = gBS->LocateHandleBuffer (ByProtocol, ProtocolGuid,
+ NULL /* SearchKey */, &NoHandles, &Handles);
+ if (EFI_ERROR (Status)) {
+ //
+ // This is not an error, just an informative condition.
+ //
+ DEBUG ((DEBUG_VERBOSE, "%a: %g: %r\n", __FUNCTION__, ProtocolGuid,
+ Status));
+ return;
+ }
+
+ ASSERT (NoHandles > 0);
+ for (Idx = 0; Idx < NoHandles; ++Idx) {
+ CHAR16 *DevicePathText;
+ STATIC CHAR16 Fallback[] = L"<device path unavailable>";
+
+ //
+ // The ConvertDevicePathToText() function handles NULL input transparently.
+ //
+ DevicePathText = ConvertDevicePathToText (
+ DevicePathFromHandle (Handles[Idx]),
+ FALSE, // DisplayOnly
+ FALSE // AllowShortcuts
+ );
+ if (DevicePathText == NULL) {
+ DevicePathText = Fallback;
+ }
+
+ if (Filter == NULL || Filter (Handles[Idx], DevicePathText)) {
+ Process (Handles[Idx], DevicePathText);
+ }
+
+ if (DevicePathText != Fallback) {
+ FreePool (DevicePathText);
+ }
+ }
+ gBS->FreePool (Handles);
+}
+
+/**
+ This CALLBACK_FUNCTION retrieves the EFI_DEVICE_PATH_PROTOCOL from the
+ handle, and adds it to ConOut and ErrOut.
+**/
+STATIC
+VOID
+EFIAPI
+AddOutput (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ DevicePath = DevicePathFromHandle (Handle);
+ if (DevicePath == NULL) {
+ DEBUG ((DEBUG_ERROR, "%a: %s: handle %p: device path not found\n",
+ __FUNCTION__, ReportText, Handle));
+ return;
+ }
+
+ Status = EfiBootManagerUpdateConsoleVariable (ConOut, DevicePath, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %s: adding to ConOut: %r\n", __FUNCTION__,
+ ReportText, Status));
+ return;
+ }
+
+ Status = EfiBootManagerUpdateConsoleVariable (ErrOut, DevicePath, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %s: adding to ErrOut: %r\n", __FUNCTION__,
+ ReportText, Status));
+ return;
+ }
+
+ DEBUG ((DEBUG_VERBOSE, "%a: %s: added to ConOut and ErrOut\n", __FUNCTION__,
+ ReportText));
+}
+
+STATIC
+INTN
+PlatformRegisterBootOption (
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ CHAR16 *Description,
+ UINT32 Attributes
+ )
+{
+ EFI_STATUS Status;
+ INTN OptionIndex;
+ EFI_BOOT_MANAGER_LOAD_OPTION NewOption;
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
+ UINTN BootOptionCount;
+
+ Status = EfiBootManagerInitializeLoadOption (
+ &NewOption,
+ LoadOptionNumberUnassigned,
+ LoadOptionTypeBoot,
+ Attributes,
+ Description,
+ DevicePath,
+ NULL,
+ 0
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ BootOptions = EfiBootManagerGetLoadOptions (
+ &BootOptionCount, LoadOptionTypeBoot
+ );
+
+ OptionIndex = EfiBootManagerFindLoadOption (
+ &NewOption, BootOptions, BootOptionCount
+ );
+
+ if (OptionIndex == -1) {
+ Status = EfiBootManagerAddLoadOptionVariable (&NewOption, MAX_UINTN);
+ ASSERT_EFI_ERROR (Status);
+ OptionIndex = BootOptionCount;
+ }
+
+ EfiBootManagerFreeLoadOption (&NewOption);
+ EfiBootManagerFreeLoadOptions (BootOptions, BootOptionCount);
+
+ return OptionIndex;
+}
+
+STATIC
+INTN
+PlatformRegisterFvBootOption (
+ CONST EFI_GUID *FileGuid,
+ CHAR16 *Description,
+ UINT32 Attributes
+ )
+{
+ EFI_STATUS Status;
+ MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FileNode;
+ EFI_LOADED_IMAGE_PROTOCOL *LoadedImage;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ INTN OptionIndex;
+
+ Status = gBS->HandleProtocol (
+ gImageHandle,
+ &gEfiLoadedImageProtocolGuid,
+ (VOID **) &LoadedImage
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ EfiInitializeFwVolDevicepathNode (&FileNode, FileGuid);
+ DevicePath = DevicePathFromHandle (LoadedImage->DeviceHandle);
+ ASSERT (DevicePath != NULL);
+ DevicePath = AppendDevicePathNode (
+ DevicePath,
+ (EFI_DEVICE_PATH_PROTOCOL *) &FileNode
+ );
+ ASSERT (DevicePath != NULL);
+
+ OptionIndex = PlatformRegisterBootOption (DevicePath,
+ Description,
+ Attributes);
+ FreePool (DevicePath);
+
+ return OptionIndex;
+}
+
+
+STATIC
+VOID
+PlatformRegisterOptionsAndKeys (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_INPUT_KEY Enter;
+ EFI_INPUT_KEY F1;
+ EFI_INPUT_KEY Esc;
+ EFI_BOOT_MANAGER_LOAD_OPTION BootOption;
+ INTN ShellOption;
+
+ ShellOption = PlatformRegisterFvBootOption (&gUefiShellFileGuid, L"UEFI Shell",
+ LOAD_OPTION_ACTIVE);
+ if (ShellOption != -1) {
+ //
+ // F1 boots Shell.
+ //
+ F1.ScanCode = SCAN_F1;
+ F1.UnicodeChar = CHAR_NULL;
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL, (UINT16) ShellOption, 0, &F1, NULL);
+ ASSERT (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED);
+ }
+
+ //
+ // Register ENTER as CONTINUE key
+ //
+ Enter.ScanCode = SCAN_NULL;
+ Enter.UnicodeChar = CHAR_CARRIAGE_RETURN;
+ Status = EfiBootManagerRegisterContinueKeyOption (0, &Enter, NULL);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Map ESC to Boot Manager Menu
+ //
+ Esc.ScanCode = SCAN_ESC;
+ Esc.UnicodeChar = CHAR_NULL;
+ Status = EfiBootManagerGetBootManagerMenu (&BootOption);
+ ASSERT_EFI_ERROR (Status);
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL, (UINT16) BootOption.OptionNumber, 0, &Esc, NULL
+ );
+ ASSERT (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED);
+}
+
+STATIC VOID
+SerialConPrint (
+ IN CHAR16 *Text
+ )
+{
+ if (mSerialConProtocol != NULL) {
+ mSerialConProtocol->OutputString (mSerialConProtocol, Text);
+ }
+}
+
+STATIC VOID EFIAPI
+ExitBootServicesHandler (
+ EFI_EVENT Event,
+ VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ CHAR16 *OsBootStr;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Green;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Black;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Yellow;
+ //
+ // Long enough to occlude the string printed
+ // in PlatformBootManagerWaitCallback.
+ //
+ STATIC CHAR16 *OsBootStrEL1 = L"Exiting UEFI and booting EL1 OS kernel!\r\n";
+ STATIC CHAR16 *OsBootStrEL2 = L"Exiting UEFI and booting EL2 OS kernel!\r\n";
+
+ if (!PcdGet32 (PcdDebugShowUEFIExit)) {
+ return;
+ }
+
+ if (PcdGet32 (PcdHypEnable)) {
+ OsBootStr = OsBootStrEL1;
+ } else {
+ OsBootStr = OsBootStrEL2;
+ }
+
+ Green.Raw = 0x00007F00;
+ Black.Raw = 0x00000000;
+ Yellow.Raw = 0x00FFFF00;
+
+ Status = BootLogoUpdateProgress (Yellow.Pixel,
+ Black.Pixel,
+ OsBootStr,
+ Green.Pixel,
+ 100, 0);
+ if (Status == EFI_SUCCESS) {
+ SerialConPrint(OsBootStr);
+ } else {
+ Print(L"\n");
+ Print(OsBootStr);
+ Print(L"\n");
+ }
+}
+
+//
+// BDS Platform Functions
+//
+/**
+ Do the platform init, can be customized by OEM/IBV
+ Possible things that can be done in PlatformBootManagerBeforeConsole:
+ > Update console variable: 1. include hot-plug devices;
+ > 2. Clear ConIn and add SOL for AMT
+ > Register new Driver#### or Boot####
+ > Register new Key####: e.g.: F12
+ > Signal ReadyToLock event
+ > Authentication action: 1. connect Auth devices;
+ > 2. Identify auto logon user.
+**/
+VOID
+EFIAPI
+PlatformBootManagerBeforeConsole (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT ExitBSEvent;
+ ESRT_MANAGEMENT_PROTOCOL *EsrtManagement;
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ ExitBootServicesHandler,
+ NULL,
+ &gEfiEventExitBootServicesGuid,
+ &ExitBSEvent
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to register ExitBootServices handler\n",
+ __FUNCTION__));
+ }
+
+ if (GetBootModeHob() == BOOT_ON_FLASH_UPDATE) {
+ DEBUG ((DEBUG_INFO, "ProcessCapsules Before EndOfDxe ......\n"));
+ Status = ProcessCapsules ();
+ DEBUG ((DEBUG_INFO, "ProcessCapsules returned %r\n", Status));
+ } else {
+ Status = gBS->LocateProtocol (&gEsrtManagementProtocolGuid, NULL,
+ (VOID **)&EsrtManagement);
+ if (!EFI_ERROR (Status)) {
+ EsrtManagement->SyncEsrtFmp ();
+ }
+ }
+
+ //
+ // Now add the device path of all handles with GOP on them to ConOut and
+ // ErrOut.
+ //
+ FilterAndProcess (&gEfiGraphicsOutputProtocolGuid, NULL, AddOutput);
+
+ //
+ // Add the hardcoded short-form USB keyboard device path to ConIn.
+ //
+ EfiBootManagerUpdateConsoleVariable (ConIn,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mUsbKeyboard, NULL);
+
+ //
+ // Add the hardcoded serial console device path to ConIn, ConOut, ErrOut.
+ //
+ ASSERT (FixedPcdGet8 (PcdDefaultTerminalType) == 4);
+ CopyGuid (&mSerialConsole.TermType.Guid, &gEfiTtyTermGuid);
+
+ EfiBootManagerUpdateConsoleVariable (ConIn,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole, NULL);
+ EfiBootManagerUpdateConsoleVariable (ConOut,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole, NULL);
+ EfiBootManagerUpdateConsoleVariable (ErrOut,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole, NULL);
+
+ //
+ // Signal EndOfDxe PI Event
+ //
+ EfiEventGroupSignal (&gEfiEndOfDxeEventGroupGuid);
+
+ //
+ // Dispatch deferred images after EndOfDxe event and ReadyToLock installation.
+ //
+ EfiBootManagerDispatchDeferredImages ();
+}
+
+/**
+ Do the platform specific action after the console is ready
+ Possible things that can be done in PlatformBootManagerAfterConsole:
+ > Console post action:
+ > Dynamically switch output mode from 100x31 to 80x25 for certain senarino
+ > Signal console ready platform customized event
+ > Run diagnostics like memory testing
+ > Connect certain devices
+ > Dispatch aditional option roms
+ > Special boot: e.g.: USB boot, enter UI
+**/
+VOID
+EFIAPI
+PlatformBootManagerAfterConsole (
+ VOID
+ )
+{
+ UINTN Index;
+ ESRT_MANAGEMENT_PROTOCOL *EsrtManagement;
+ EFI_STATUS Status;
+ EFI_HANDLE SerialHandle;
+
+ Status = EfiBootManagerConnectDevicePath((EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole, &SerialHandle);
+ if (Status == EFI_SUCCESS) {
+ gBS->HandleProtocol(SerialHandle, &gEfiSimpleTextOutProtocolGuid,
+ (VOID **) &mSerialConProtocol);
+ }
+
+ //
+ // Show the splash screen.
+ //
+ Status = BootLogoEnableLogo ();
+ if (Status == EFI_SUCCESS) {
+ SerialConPrint(BOOT_PROMPT);
+ } else {
+ Print(BOOT_PROMPT);
+ }
+
+ //
+ // Connect the rest of the devices.
+ //
+ EfiBootManagerConnectAll ();
+
+ Status = gBS->LocateProtocol (&gEsrtManagementProtocolGuid, NULL,
+ (VOID **)&EsrtManagement);
+ if (!EFI_ERROR (Status)) {
+ EsrtManagement->SyncEsrtFmp ();
+ }
+
+ if (GetBootModeHob() == BOOT_ON_FLASH_UPDATE) {
+ DEBUG((DEBUG_INFO, "ProcessCapsules After EndOfDxe ......\n"));
+ Status = ProcessCapsules ();
+ DEBUG((DEBUG_INFO, "ProcessCapsules returned %r\n", Status));
+ }
+
+ for (Index = 1; Index < 5; Index++) {
+ UINT16 Desc[11];
+ /*
+ * Add boot options to allow booting from
+ * a mass storage device plugged into any
+ * of the RPi USB ports.
+ */
+ mUsbHubPort.Dev.ParentPortNumber = Index;
+ UnicodeSPrint(Desc, sizeof (Desc), L"USB Port %u", Index);
+ PlatformRegisterBootOption ((VOID *) &mUsbHubPort,
+ Desc, LOAD_OPTION_ACTIVE);
+ }
+
+ PlatformRegisterBootOption ((VOID *) &mSDHost,
+ L"uSD on SD Host",
+ LOAD_OPTION_ACTIVE);
+ PlatformRegisterBootOption ((VOID *) &mArasan,
+ L"uSD on Arasan MMC Host",
+ LOAD_OPTION_ACTIVE);
+
+ PlatformRegisterOptionsAndKeys ();
+}
+
+/**
+ This function is called each second during the boot manager waits the
+ timeout.
+
+ @param TimeoutRemain The remaining timeout.
+**/
+VOID
+EFIAPI
+PlatformBootManagerWaitCallback (
+ UINT16 TimeoutRemain
+ )
+{
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Black;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION White;
+ UINT16 Timeout;
+ EFI_STATUS Status;
+ EFI_BOOT_LOGO_PROTOCOL *BootLogo;
+
+ Timeout = PcdGet16 (PcdPlatformBootTimeOut);
+
+ Black.Raw = 0x00000000;
+ White.Raw = 0x00FFFFFF;
+
+ Status = BootLogoUpdateProgress (
+ White.Pixel,
+ Black.Pixel,
+ BOOT_PROMPT,
+ White.Pixel,
+ (Timeout - TimeoutRemain) * 100 / Timeout,
+ 0
+ );
+ if (Status == EFI_SUCCESS) {
+ SerialConPrint(L".");
+ } else {
+ Print(L".");
+ }
+
+ if (TimeoutRemain == 0) {
+ BootLogo = NULL;
+
+ //
+ // Clear out the boot logo so that Windows displays its own logo
+ // instead of ours.
+ //
+ Status = gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);
+ if (!EFI_ERROR (Status) && (BootLogo != NULL)) {
+ Status = BootLogo->SetBootLogo (BootLogo, NULL, 0, 0, 0, 0);
+ ASSERT_EFI_ERROR (Status);
+ };
+
+ gST->ConOut->ClearScreen (gST->ConOut);
+ }
+}
+
+/**
+ The function is called when no boot option could be launched,
+ including platform recovery options and options pointing to applications
+ built into firmware volumes.
+ If this function returns, BDS attempts to enter an infinite loop.
+**/
+VOID
+EFIAPI
+PlatformBootManagerUnableToBoot(
+ VOID
+)
+{
+ EFI_STATUS Status;
+ EFI_INPUT_KEY Key;
+ EFI_BOOT_MANAGER_LOAD_OPTION BootManagerMenu;
+ UINTN Index;
+
+ //
+ // BootManagerMenu doesn't contain the correct information when return status
+ // is EFI_NOT_FOUND.
+ //
+ Status = EfiBootManagerGetBootManagerMenu(&BootManagerMenu);
+ if (EFI_ERROR(Status)) {
+ return;
+ }
+ //
+ // Normally BdsDxe does not print anything to the system console, but this is
+ // a last resort -- the end-user will likely not see any DEBUG messages
+ // logged in this situation.
+ //
+ // AsciiPrint() will NULL-check gST->ConOut internally. We check gST->ConIn
+ // here to see if it makes sense to request and wait for a keypress.
+ //
+ if (gST->ConIn != NULL) {
+ AsciiPrint(
+ "%a: No bootable option or device was found.\n"
+ "%a: Press any key to enter the Boot Manager Menu.\n",
+ gEfiCallerBaseName,
+ gEfiCallerBaseName
+ );
+ Status = gBS->WaitForEvent(1, &gST->ConIn->WaitForKey, &Index);
+ ASSERT_EFI_ERROR(Status);
+ ASSERT(Index == 0);
+
+ //
+ // Drain any queued keys.
+ //
+ while (!EFI_ERROR(gST->ConIn->ReadKeyStroke(gST->ConIn, &Key))) {
+ //
+ // just throw away Key
+ //
+ }
+ }
+
+ for (;;) {
+ EfiBootManagerBoot(&BootManagerMenu);
+ }
+}
diff --git a/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.h b/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.h
new file mode 100644
index 000000000000..3717ba6174df
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.h
@@ -0,0 +1,60 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2016, Linaro Ltd. All rights reserved.
+ * Copyright (c) 2015-2016, Red Hat, Inc.
+ * Copyright (c) 2014, ARM Ltd. All rights reserved.
+ * Copyright (c) 2004-2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef _PLATFORM_BM_H_
+#define _PLATFORM_BM_H_
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+/**
+ Use SystemTable Conout to stop video based Simple Text Out consoles from
+ going to the video device. Put up LogoFile on every video device that is a
+ console.
+
+ @param[in] LogoFile File name of logo to display on the center of the
+ screen.
+
+ @retval EFI_SUCCESS ConsoleControl has been flipped to graphics and logo
+ displayed.
+ @retval EFI_UNSUPPORTED Logo not found
+**/
+EFI_STATUS
+EnableQuietBoot (
+ IN EFI_GUID *LogoFile
+ );
+
+/**
+ Use SystemTable Conout to turn on video based Simple Text Out consoles. The
+ Simple Text Out screens will now be synced up with all non video output
+ devices
+
+ @retval EFI_SUCCESS UGA devices are back in text mode and synced up.
+**/
+EFI_STATUS
+DisableQuietBoot (
+ VOID
+ );
+
+#endif // _PLATFORM_BM_H_
diff --git a/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf b/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
new file mode 100644
index 000000000000..cb1d42364265
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
@@ -0,0 +1,90 @@
+#/** @file
+#
+# Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2016, Linaro Ltd. All rights reserved.
+# Copyright (c) 2015-2016, Red Hat, Inc.
+# Copyright (c) 2014, ARM Ltd. All rights reserved.
+# Copyright (c) 2007-2014, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PlatformBootManagerLib
+ FILE_GUID = 92FD2DE3-B9CB-4B35-8141-42AD34D73C9F
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformBootManagerLib|DXE_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = AARCH64
+#
+
+[Sources]
+ PlatformBm.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ ShellPkg/ShellPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ BootLogoLib
+ CapsuleLib
+ DebugLib
+ DevicePathLib
+ DxeServicesLib
+ HobLib
+ MemoryAllocationLib
+ PcdLib
+ PrintLib
+ UefiBootManagerLib
+ UefiBootServicesTableLib
+ UefiLib
+
+[FeaturePcd]
+ gEfiMdePkgTokenSpaceGuid.PcdUgaConsumeSupport
+
+[FixedPcd]
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut
+ gRaspberryPiTokenSpaceGuid.PcdHypEnable
+ gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit
+
+[Guids]
+ gEfiFileInfoGuid
+ gEfiFileSystemInfoGuid
+ gEfiFileSystemVolumeLabelInfoIdGuid
+ gEfiEndOfDxeEventGroupGuid
+ gEfiTtyTermGuid
+ gUefiShellFileGuid
+ gEfiEventExitBootServicesGuid
+
+[Protocols]
+ gEfiDevicePathProtocolGuid
+ gEfiGraphicsOutputProtocolGuid
+ gEfiLoadedImageProtocolGuid
+ gEfiSimpleFileSystemProtocolGuid
+ gEsrtManagementProtocolGuid
+ gEfiUsb2HcProtocolGuid
+ gEfiBootLogoProtocolGuid
diff --git a/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/AArch64/RaspberryPiHelper.S b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/AArch64/RaspberryPiHelper.S
new file mode 100644
index 000000000000..91567de8bb78
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/AArch64/RaspberryPiHelper.S
@@ -0,0 +1,107 @@
+/** @file
+ *
+ * Copyright (c) 2016, Linaro Limited. All rights reserved.
+ * Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <AsmMacroIoLibV8.h>
+#include <Library/ArmLib.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/RpiFirmware.h>
+
+#define MAX_TRIES 0x100000
+
+ .macro drain
+ mov x5, #MAX_TRIES
+0: ldr w6, [x4, #BCM2836_MBOX_STATUS_OFFSET]
+ tbnz w6, #BCM2836_MBOX_STATUS_EMPTY, 1f
+ dmb ld
+ ldr wzr, [x4, #BCM2836_MBOX_READ_OFFSET]
+ subs x5, x5, #1
+ b.ne 0b
+1:
+ .endm
+
+ .macro poll, status
+ mov x5, #MAX_TRIES
+0: ldr w6, [x4, #BCM2836_MBOX_STATUS_OFFSET]
+ tbz w6, #\status, 1f
+ dmb ld
+ subs x5, x5, #1
+ b.ne 0b
+1:
+ .endm
+
+ASM_FUNC(ArmPlatformPeiBootAction)
+ adr x0, .Lmeminfo_buffer
+ mov x1, #FixedPcdGet64 (PcdDmaDeviceOffset)
+ orr x0, x0, #RPI_FW_MBOX_CHANNEL
+ add x0, x0, x1
+
+ MOV32 (x4, BCM2836_MBOX_BASE_ADDRESS)
+
+ drain
+ poll BCM2836_MBOX_STATUS_FULL
+ str w0, [x4, #BCM2836_MBOX_WRITE_OFFSET]
+ dmb sy
+ poll BCM2836_MBOX_STATUS_EMPTY
+ dmb sy
+ ldr wzr, [x4, #BCM2836_MBOX_READ_OFFSET]
+ dmb ld
+
+ ldr w0, .Lmemsize
+ sub x0, x0, #1
+ adr x1, mSystemMemoryEnd
+ str x0, [x1]
+ ret
+
+ .align 4
+.Lmeminfo_buffer:
+ .long .Lbuffer_size
+ .long 0x0
+ .long RPI_FW_GET_ARM_MEMSIZE
+ .long 8 // buf size
+ .long 0 // input len
+ .long 0 // mem base
+.Lmemsize:
+ .long 0 // mem size
+ .long 0 // end tag
+ .set .Lbuffer_size, . - .Lmeminfo_buffer
+
+//UINTN
+//ArmPlatformGetPrimaryCoreMpId (
+// VOID
+// );
+ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
+ MOV32 (w0, FixedPcdGet32 (PcdArmPrimaryCore))
+ ret
+
+//UINTN
+//ArmPlatformIsPrimaryCore (
+// IN UINTN MpId
+// );
+ASM_FUNC(ArmPlatformIsPrimaryCore)
+ mov x0, #1
+ ret
+
+//UINTN
+//ArmPlatformGetCorePosition (
+// IN UINTN MpId
+// );
+// With this function: CorePos = (ClusterId * 4) + CoreId
+ASM_FUNC(ArmPlatformGetCorePosition)
+ and x1, x0, #ARM_CORE_MASK
+ and x0, x0, #ARM_CLUSTER_MASK
+ add x0, x1, x0, LSR #6
+ ret
+
+ASM_FUNCTION_REMOVE_IF_UNREFERENCED
diff --git a/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPi.c b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPi.c
new file mode 100644
index 000000000000..ae0b7680f3c3
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPi.c
@@ -0,0 +1,99 @@
+/** @file
+ *
+ * Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+ * Copyright (c) 2014, Red Hat, Inc.
+ * Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+ *
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Library/IoLib.h>
+#include <Library/ArmPlatformLib.h>
+#include <Library/DebugLib.h>
+#include <Pi/PiBootMode.h>
+
+#include <Ppi/ArmMpCoreInfo.h>
+
+/**
+ Return the current Boot Mode
+
+ This function returns the boot reason on the platform
+
+ @return Return the current Boot Mode of the platform
+
+**/
+EFI_BOOT_MODE
+ArmPlatformGetBootMode (
+ VOID
+ )
+{
+ return BOOT_WITH_FULL_CONFIGURATION;
+}
+
+/**
+ This function is called by PrePeiCore, in the SEC phase.
+**/
+RETURN_STATUS
+ArmPlatformInitialize (
+ IN UINTN MpId
+ )
+{
+ return RETURN_SUCCESS;
+}
+
+VOID
+ArmPlatformInitializeSystemMemory (
+ VOID
+ )
+{
+}
+
+STATIC ARM_CORE_INFO mRpi3InfoTable[] = {
+ { 0x0, 0x0, }, // Cluster 0, Core 0
+ { 0x0, 0x1, }, // Cluster 0, Core 1
+ { 0x0, 0x2, }, // Cluster 0, Core 2
+ { 0x0, 0x3, }, // Cluster 0, Core 3
+};
+
+STATIC
+EFI_STATUS
+PrePeiCoreGetMpCoreInfo (
+ OUT UINTN *CoreCount,
+ OUT ARM_CORE_INFO **ArmCoreTable
+ )
+{
+ // Only support one cluster
+ *CoreCount = sizeof(mRpi3InfoTable) / sizeof(ARM_CORE_INFO);
+ *ArmCoreTable = mRpi3InfoTable;
+
+ return EFI_SUCCESS;
+}
+
+STATIC ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = {
+ PrePeiCoreGetMpCoreInfo
+};
+STATIC EFI_PEI_PPI_DESCRIPTOR mPlatformPpiTable[] = {
+ {
+ EFI_PEI_PPI_DESCRIPTOR_PPI,
+ &gArmMpCoreInfoPpiGuid,
+ &mMpCoreInfoPpi
+ }
+};
+
+VOID
+ArmPlatformGetPlatformPpiList (
+ OUT UINTN *PpiListSize,
+ OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
+ )
+{
+ *PpiListSize = sizeof(mPlatformPpiTable);
+ *PpiList = mPlatformPpiTable;
+}
diff --git a/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiMem.c b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiMem.c
new file mode 100644
index 000000000000..69821e405134
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiMem.c
@@ -0,0 +1,160 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2014, Linaro Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Library/ArmPlatformLib.h>
+#include <Library/DebugLib.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <Library/PcdLib.h>
+
+extern UINT64 mSystemMemoryEnd;
+extern UINT64 mGPUMemoryBase;
+extern UINT64 mGPUMemoryLength;
+
+#define VariablesSize (FixedPcdGet32(PcdFlashNvStorageVariableSize) + \
+ FixedPcdGet32(PcdFlashNvStorageFtwWorkingSize) + \
+ FixedPcdGet32(PcdFlashNvStorageFtwSpareSize) + \
+ FixedPcdGet32(PcdNvStorageEventLogSize))
+
+#define VariablesBase (FixedPcdGet64(PcdFdBaseAddress) + \
+ FixedPcdGet32(PcdFdSize) - \
+ VariablesSize)
+
+#define ATFBase (FixedPcdGet64(PcdFdBaseAddress) + FixedPcdGet32(PcdFdSize))
+
+STATIC ARM_MEMORY_REGION_DESCRIPTOR RaspberryPiMemoryRegionDescriptor[] = {
+ {
+ /* Firmware Volume. */
+ FixedPcdGet64(PcdFdBaseAddress), FixedPcdGet64(PcdFdBaseAddress),
+ FixedPcdGet32(PcdFdSize) - VariablesSize,
+ ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
+ },
+ {
+ /* Variables Volume. */
+ VariablesBase, VariablesBase,
+ VariablesSize,
+ ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
+ },
+ {
+ /* ATF reserved RAM. */
+ ATFBase, ATFBase,
+ FixedPcdGet64(PcdSystemMemoryBase) - ATFBase,
+ ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
+ },
+ {
+ /* System RAM. */
+ FixedPcdGet64(PcdSystemMemoryBase), FixedPcdGet64(PcdSystemMemoryBase),
+ 0,
+ ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
+ },
+ {
+ /* Reserved GPU RAM. */
+ 0,
+ 0,
+ 0,
+ ARM_MEMORY_REGION_ATTRIBUTE_DEVICE
+ },
+ {
+ /* SOC registers. */
+ BCM2836_SOC_REGISTERS,
+ BCM2836_SOC_REGISTERS,
+ BCM2836_SOC_REGISTER_LENGTH,
+ ARM_MEMORY_REGION_ATTRIBUTE_DEVICE
+ },
+ {
+ }
+};
+
+/**
+ Return the Virtual Memory Map of your platform
+
+ This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU
+ on your platform.
+
+ @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR
+ describing a Physical-to-Virtual Memory
+ mapping. This array must be ended by a
+ zero-filled entry
+
+**/
+VOID
+ArmPlatformGetVirtualMemoryMap (
+ IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap
+ )
+{
+ RaspberryPiMemoryRegionDescriptor[3].Length = mSystemMemoryEnd + 1 -
+ FixedPcdGet64(PcdSystemMemoryBase);
+
+ RaspberryPiMemoryRegionDescriptor[4].PhysicalBase =
+ RaspberryPiMemoryRegionDescriptor[3].PhysicalBase +
+ RaspberryPiMemoryRegionDescriptor[3].Length;
+
+ RaspberryPiMemoryRegionDescriptor[4].VirtualBase =
+ RaspberryPiMemoryRegionDescriptor[4].PhysicalBase;
+
+ RaspberryPiMemoryRegionDescriptor[4].Length =
+ RaspberryPiMemoryRegionDescriptor[5].PhysicalBase -
+ RaspberryPiMemoryRegionDescriptor[4].PhysicalBase;
+
+ DEBUG ((DEBUG_INFO, "FD:\n"
+ "\tPhysicalBase: 0x%lX\n"
+ "\tVirtualBase: 0x%lX\n"
+ "\tLength: 0x%lX\n",
+ RaspberryPiMemoryRegionDescriptor[0].PhysicalBase,
+ RaspberryPiMemoryRegionDescriptor[0].VirtualBase,
+ RaspberryPiMemoryRegionDescriptor[0].Length +
+ RaspberryPiMemoryRegionDescriptor[1].Length));
+
+ DEBUG ((DEBUG_INFO, "Variables (part of FD):\n"
+ "\tPhysicalBase: 0x%lX\n"
+ "\tVirtualBase: 0x%lX\n"
+ "\tLength: 0x%lX\n",
+ RaspberryPiMemoryRegionDescriptor[1].PhysicalBase,
+ RaspberryPiMemoryRegionDescriptor[1].VirtualBase,
+ RaspberryPiMemoryRegionDescriptor[1].Length));
+
+ DEBUG ((DEBUG_INFO, "ATF RAM:\n"
+ "\tPhysicalBase: 0x%lX\n"
+ "\tVirtualBase: 0x%lX\n"
+ "\tLength: 0x%lX\n",
+ RaspberryPiMemoryRegionDescriptor[2].PhysicalBase,
+ RaspberryPiMemoryRegionDescriptor[2].VirtualBase,
+ RaspberryPiMemoryRegionDescriptor[2].Length));
+
+ DEBUG ((DEBUG_INFO, "System RAM:\n"
+ "\tPhysicalBase: 0x%lX\n"
+ "\tVirtualBase: 0x%lX\n"
+ "\tLength: 0x%lX\n",
+ RaspberryPiMemoryRegionDescriptor[3].PhysicalBase,
+ RaspberryPiMemoryRegionDescriptor[3].VirtualBase,
+ RaspberryPiMemoryRegionDescriptor[3].Length));
+
+ DEBUG ((DEBUG_INFO, "GPU Reserved:\n"
+ "\tPhysicalBase: 0x%lX\n"
+ "\tVirtualBase: 0x%lX\n"
+ "\tLength: 0x%lX\n",
+ RaspberryPiMemoryRegionDescriptor[4].PhysicalBase,
+ RaspberryPiMemoryRegionDescriptor[4].VirtualBase,
+ RaspberryPiMemoryRegionDescriptor[4].Length));
+
+ DEBUG ((DEBUG_INFO, "SoC reserved:\n"
+ "\tPhysicalBase: 0x%lX\n"
+ "\tVirtualBase: 0x%lX\n"
+ "\tLength: 0x%lX\n",
+ RaspberryPiMemoryRegionDescriptor[5].PhysicalBase,
+ RaspberryPiMemoryRegionDescriptor[5].VirtualBase,
+ RaspberryPiMemoryRegionDescriptor[5].Length));
+
+ *VirtualMemoryMap = RaspberryPiMemoryRegionDescriptor;
+}
diff --git a/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
new file mode 100644
index 000000000000..2ee4450d79e4
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
@@ -0,0 +1,64 @@
+#/** @file
+#
+# Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+# Copyright (c) 2011-2014, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = RaspberryPiPlatformLib
+ FILE_GUID = 050182ef-f708-4148-b4bc-256cabf74fea
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ArmPlatformLib|SEC PEIM
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ ArmLib
+ FdtLib
+ IoLib
+ MemoryAllocationLib
+ PcdLib
+ PrintLib
+
+[Sources.common]
+ RaspberryPi.c
+ RaspberryPiMem.c
+
+[Sources.AARCH64]
+ AArch64/RaspberryPiHelper.S
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFdBaseAddress
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmPlatformTokenSpaceGuid.PcdCoreCount
+ gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
+ gArmTokenSpaceGuid.PcdArmPrimaryCore
+ gArmTokenSpaceGuid.PcdFdSize
+ gEmbeddedTokenSpaceGuid.PcdDmaDeviceOffset
+ gArmTokenSpaceGuid.PcdSystemMemoryBase
+ gArmTokenSpaceGuid.PcdSystemMemorySize
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+
+[Ppis]
+ gArmMpCoreInfoPpiGuid
diff --git a/Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.c b/Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.c
new file mode 100644
index 000000000000..1a3944b71d03
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.c
@@ -0,0 +1,104 @@
+/** @file
+ *
+ * Support ResetSystem Runtime call using PSCI calls.
+ * Signals the gRaspberryPiEventResetGuid event group on reset.
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2014, Linaro Ltd. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Ltd. All rights reserved.
+ * Copyright (c) 2008-2009, Apple Inc. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/EfiResetSystemLib.h>
+#include <Library/ArmSmcLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeLib.h>
+
+#include <IndustryStandard/ArmStdSmc.h>
+
+/**
+ Resets the entire platform.
+
+ @param ResetType The type of reset to perform.
+ @param ResetStatus The status code for the reset.
+ @param DataSize The size, in bytes, of WatchdogData.
+ @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
+ EfiResetShutdown the data buffer starts with a Null-terminated
+ Unicode string, optionally followed by additional binary data.
+
+**/
+EFI_STATUS
+EFIAPI
+LibResetSystem (
+ IN EFI_RESET_TYPE ResetType,
+ IN EFI_STATUS ResetStatus,
+ IN UINTN DataSize,
+ IN CHAR16 *ResetData OPTIONAL
+ )
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ if (!EfiAtRuntime ()) {
+ /*
+ * Only if still in UEFI.
+ */
+ EfiEventGroupSignal(&gRaspberryPiEventResetGuid);
+ }
+
+ switch (ResetType) {
+ case EfiResetPlatformSpecific:
+ // Map the platform specific reset as reboot
+ case EfiResetWarm:
+ // Map a warm reset into a cold reset
+ case EfiResetCold:
+ // Send a PSCI 0.2 SYSTEM_RESET command
+ ArmSmcArgs.Arg0 = ARM_SMC_ID_PSCI_SYSTEM_RESET;
+ break;
+ case EfiResetShutdown:
+ // Send a PSCI 0.2 SYSTEM_OFF command
+ ArmSmcArgs.Arg0 = ARM_SMC_ID_PSCI_SYSTEM_OFF;
+ break;
+ default:
+ ASSERT (FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ ArmCallSmc (&ArmSmcArgs);
+
+ // We should never be here
+ DEBUG ((DEBUG_ERROR, "%a: PSCI Reset failed\n", __FUNCTION__));
+ CpuDeadLoop ();
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Initialize any infrastructure required for LibResetSystem () to function.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+LibInitializeResetSystem (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.inf b/Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.inf
new file mode 100644
index 000000000000..1c32a4b08162
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.inf
@@ -0,0 +1,46 @@
+#/** @file
+#
+# Reset System lib using PSCI hypervisor or secure monitor calls.
+# Signals the gRaspberryPiEventResetGuid event group on reset.
+#
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2014, Linaro Ltd. All rights reserved.
+# Copyright (c) 2014, ARM Ltd. All rights reserved.
+# Copyright (c) 2008, Apple Inc. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ResetLib
+ FILE_GUID = B9F59B69-A105-41C7-8F5A-2C60DD7FD7AB
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = EfiResetSystemLib
+
+[Sources]
+ ResetLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ DebugLib
+ BaseLib
+ ArmSmcLib
+ UefiLib
+ UefiRuntimeLib
+
+[Guids]
+ gRaspberryPiEventResetGuid
diff --git a/Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c b/Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
new file mode 100644
index 000000000000..5e1dd768331a
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
@@ -0,0 +1,222 @@
+/** @file
+ *
+ * Implement dummy EFI RealTimeClock runtime services.
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) Microsoft Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <PiDxe.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/RealTimeClockLib.h>
+#include <Library/TimerLib.h>
+#include <Library/TimeBaseLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Library/ArmGenericTimerCounterLib.h>
+
+/**
+ Returns the current time and date information, and the time-keeping capabilities
+ of the virtual RTC.
+
+ For simplicity, this LibGetTime does not report Years/Months, instead it will only report current
+ Day, Hours, Minutes and Seconds starting from the begining of CPU up-time. Otherwise, a more
+ complex logic will be required to account for leap years and days/month differences.
+
+ @param Time A pointer to storage to receive a snapshot of the current time.
+ @param Capabilities An optional pointer to a buffer to receive the real time clock
+ device's capabilities.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER Time is NULL.
+ @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+LibGetTime (
+ OUT EFI_TIME *Time,
+ OUT EFI_TIME_CAPABILITIES *Capabilities
+ )
+{
+ UINTN DataSize;
+ UINT64 Counter;
+ EFI_STATUS Status;
+ UINTN ElapsedSeconds;
+ UINT32 Remainder;
+ UINT32 Freq = ArmGenericTimerGetTimerFreq();
+
+ if (Time == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Depend on ARM generic timer to report date/time relative to the
+ // start of CPU timer counting where date and time will always
+ // be relative to the date/time 1/1/1900 00H:00M:00S
+ //
+
+ ASSERT (Freq != 0);
+ if (Freq == 0) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (Capabilities) {
+ Capabilities->Accuracy = 0;
+ Capabilities->Resolution = Freq;
+ Capabilities->SetsToZero = FALSE;
+ }
+
+ DataSize = sizeof (UINTN);
+ ElapsedSeconds = 0;
+ Status = EfiGetVariable (L"RtcEpochSeconds",
+ &gEfiCallerIdGuid,
+ NULL,
+ &DataSize,
+ &ElapsedSeconds);
+ if (EFI_ERROR (Status)) {
+ ElapsedSeconds = PcdGet64(PcdBootEpochSeconds);
+ }
+ Counter = GetPerformanceCounter ();
+ ElapsedSeconds += DivU64x32Remainder (Counter, Freq, &Remainder);
+ EpochToEfiTime (ElapsedSeconds, Time);
+
+ //
+ // Frequency < 0x100000000, so Remainder < 0x100000000, then (Remainder * 1,000,000,000)
+ // will not overflow 64-bit.
+ //
+ Time->Nanosecond = DivU64x32 (MultU64x64 ((UINT64) Remainder,
+ 1000000000U), Freq);
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Sets the current local time and date information.
+
+ @param Time A pointer to the current time.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+ @retval EFI_DEVICE_ERROR The time could not be set due due to hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+LibSetTime (
+ IN EFI_TIME *Time
+ )
+{
+ UINTN Epoch;
+
+ if (!IsTimeValid(Time)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Epoch = EfiTimeToEpoch(Time);
+ return EfiSetVariable(L"RtcEpochSeconds", &gEfiCallerIdGuid,
+ EFI_VARIABLE_BOOTSERVICE_ACCESS |
+ EFI_VARIABLE_RUNTIME_ACCESS |
+ EFI_VARIABLE_NON_VOLATILE,
+ sizeof (Epoch),
+ &Epoch);
+}
+
+
+/**
+ Returns the current wakeup alarm clock setting.
+
+ @param Enabled Indicates if the alarm is currently enabled or disabled.
+ @param Pending Indicates if the alarm signal is pending and requires acknowledgement.
+ @param Time The current alarm setting.
+
+ @retval EFI_SUCCESS The alarm settings were returned.
+ @retval EFI_INVALID_PARAMETER Any parameter is NULL.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+LibGetWakeupTime (
+ OUT BOOLEAN *Enabled,
+ OUT BOOLEAN *Pending,
+ OUT EFI_TIME *Time
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ Sets the system wakeup alarm clock time.
+
+ @param Enabled Enable or disable the wakeup alarm.
+ @param Time If Enable is TRUE, the time to set the wakeup alarm for.
+
+ @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If
+ Enable is FALSE, then the wakeup alarm was disabled.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error.
+ @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform.
+
+**/
+EFI_STATUS
+EFIAPI
+LibSetWakeupTime (
+ IN BOOLEAN Enabled,
+ OUT EFI_TIME *Time
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ This is the declaration of an EFI image entry point. This can be the entry point to an application
+ written to this specification, an EFI boot service driver, or an EFI runtime driver.
+
+ @param ImageHandle Handle that identifies the loaded image.
+ @param SystemTable System Table for this image.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+LibRtcInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Fixup internal data so that EFI can be call in virtual mode.
+ Call the passed in Child Notify event and convert any pointers in
+ lib to virtual mode.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+VOID
+EFIAPI
+LibRtcVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ return;
+}
diff --git a/Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.inf b/Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.inf
new file mode 100644
index 000000000000..847bcfadd824
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.inf
@@ -0,0 +1,43 @@
+#/** @file
+#
+# Implement dummy EFI RealTimeClock runtime services.
+#
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) Microsoft Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = VirtualRealTimeClockLib
+ FILE_GUID = 1E27D461-78F3-4F7D-B1C2-F72384F13A6E
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = RealTimeClockLib
+
+[Sources.common]
+ VirtualRealTimeClockLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ IoLib
+ DebugLib
+ TimerLib
+ TimeBaseLib
+ UefiRuntimeLib
+
+[Pcd]
+ gRaspberryPiTokenSpaceGuid.PcdBootEpochSeconds
diff --git a/Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec b/Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
new file mode 100644
index 000000000000..51f2f07aab8a
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
@@ -0,0 +1,63 @@
+## @file
+#
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+# Copyright (c) 2017 - 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+##
+
+[Defines]
+ DEC_SPECIFICATION = 0x0001001A
+ PACKAGE_NAME = RaspberryPiPkg
+ PACKAGE_GUID = DFA0CA8B-F3AC-4607-96AC-46FA04B84DCC
+ PACKAGE_VERSION = 0.1
+
+[Includes]
+ Include
+
+[Protocols]
+ gRaspberryPiFirmwareProtocolGuid = { 0x0ACA9535, 0x7AD0, 0x4286, { 0xB0, 0x2E, 0x87, 0xFA, 0x7E, 0x2A, 0x57, 0x11 } }
+ gRaspberryPiConfigAppliedProtocolGuid = { 0x0ACA4444, 0x7AD0, 0x4286, { 0xB0, 0x2E, 0x87, 0xFA, 0x7E, 0x2A, 0x57, 0x11 } }
+ gRaspberryPiMmcHostProtocolGuid = { 0x3e591c00, 0x9e4a, 0x11df, {0x92, 0x44, 0x00, 0x02, 0xA5, 0xF5, 0xF5, 0x1B } }
+ gExtendedTextOutputProtocolGuid = { 0x387477ff, 0xffc7, 0xffd2, {0x8e, 0x39, 0x0, 0xff, 0xc9, 0x69, 0x72, 0x3b } }
+
+[Guids]
+ gRaspberryPiTokenSpaceGuid = {0xCD7CC258, 0x31DB, 0x11E6, {0x9F, 0xD3, 0x63, 0xB0, 0xB8, 0xEE, 0xD6, 0xB5}}
+ gRaspberryPiFdtFileGuid = {0xDF5DA223, 0x1D27, 0x47C3, { 0x8D, 0x1B, 0x9A, 0x41, 0xB5, 0x5A, 0x18, 0xBC}}
+ gRaspberryPiEventResetGuid = {0xCD7CC258, 0x31DB, 0x11E6, {0x9F, 0xD3, 0x63, 0xB4, 0xB4, 0xE4, 0xD4, 0xB4}}
+ gConfigDxeFormSetGuid = {0xCD7CC258, 0x31DB, 0x22E6, {0x9F, 0x22, 0x63, 0xB0, 0xB8, 0xEE, 0xD6, 0xB5}}
+
+[PcdsFixedAtBuild.common]
+ gRaspberryPiTokenSpaceGuid.PcdFdtBaseAddress|0x10000|UINT32|0x00000001
+ gRaspberryPiTokenSpaceGuid.PcdFirmwareBlockSize|0x0|UINT32|0x00000002
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogBase|0x0|UINT32|0x00000003
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogSize|0x0|UINT32|0x00000004
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageVariableBase|0x0|UINT32|0x00000005
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwSpareBase|0x0|UINT32|0x00000006
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwWorkingBase|0x0|UINT32|0x00000007
+ gRaspberryPiTokenSpaceGuid.PcdBootEpochSeconds|0x0|UINT64|0x00000008
+
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ gRaspberryPiTokenSpaceGuid.PcdHypEnable|0|UINT32|0x00000009
+ gRaspberryPiTokenSpaceGuid.PcdHypLogMask|0|UINT32|0x0000000a
+ gRaspberryPiTokenSpaceGuid.PcdHypWindowsDebugHook|0|UINT32|0x0000000b
+ gRaspberryPiTokenSpaceGuid.PcdHypWin2000Mask|0|UINT32|0x0000000c
+ gRaspberryPiTokenSpaceGuid.PcdCpuClock|0|UINT32|0x0000000d
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000e
+ gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x0000000f
+ gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000010
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000011
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000012
+ gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000013
+ gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000014
+ gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000015
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes|0|UINT32|0x00000017
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot|0|UINT32|0x00000018
diff --git a/Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc b/Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc
new file mode 100644
index 000000000000..8610fae0b92f
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc
@@ -0,0 +1,636 @@
+# @file
+#
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2014, Linaro Limited. All rights reserved.
+# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
+# Copyright (c) 2017 - 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+##
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = RaspberryPi
+ PLATFORM_GUID = 5d30c4fc-93cf-40c9-8486-3badc0410816
+ PLATFORM_VERSION = 0.3
+ DSC_SPECIFICATION = 0x00010005
+ OUTPUT_DIRECTORY = Build/RaspberryPiPkg
+ SUPPORTED_ARCHITECTURES = AARCH64
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf
+
+ #
+ # Defines for default states. These can be changed on the command line.
+ # -D FLAG=VALUE
+ #
+ DEFINE SECURE_BOOT_ENABLE = FALSE
+ DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
+
+!ifndef BUILD_EPOCH
+ DEFINE BUILD_EPOCH = 1546300800
+!endif
+################################################################################
+#
+# Library Class section - list of all Library Classes needed by this Platform.
+#
+################################################################################
+[LibraryClasses.common]
+!if $(TARGET) == RELEASE
+ DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
+!else
+ DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+!endif
+ DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ SafeIntLib|MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf
+ BmpSupportLib|MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf
+ SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
+ PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
+
+ UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+ DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+ UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+ UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf
+ SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
+
+ UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
+ OrderedCollectionLib|MdePkg/Library/BaseOrderedCollectionRedBlackTreeLib/BaseOrderedCollectionRedBlackTreeLib.inf
+
+ #
+ # Ramdisk Requirements
+ #
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+ # Allow dynamic PCDs
+ #
+ PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
+
+ # use the accelerated BaseMemoryLibOptDxe by default, overrides for SEC/PEI below
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLibOptDxe/BaseMemoryLibOptDxe.inf
+
+ # Networking Requirements
+ NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
+ DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf
+ UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
+ IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf
+
+ #
+ # It is not possible to prevent the ARM compiler from inserting calls to intrinsic functions.
+ # This library provides the instrinsic functions such a compiler may generate calls to.
+ #
+ NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+ # Add support for GCC stack protector
+ NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
+
+ # ARM Architectural Libraries
+ CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+ DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
+ CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf
+ ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
+ DmaLib|EmbeddedPkg/Library/NonCoherentDmaLib/NonCoherentDmaLib.inf
+ TimeBaseLib|EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf
+ ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf
+ ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
+ ArmHvcLib|ArmPkg/Library/ArmHvcLib/ArmHvcLib.inf
+ ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerPhyCounterLib/ArmGenericTimerPhyCounterLib.inf
+
+ PciCf8Lib|MdePkg/Library/BasePciCf8Lib/BasePciCf8Lib.inf
+ PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf
+ PlatformHookLib|MdeModulePkg/Library/BasePlatformHookLibNull/BasePlatformHookLibNull.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+ #
+ # Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window
+ # in the debugger will show load and unload commands for symbols. You can cut and paste this
+ # into the command window to load symbols. We should be able to use a script to do this, but
+ # the version of RVD I have does not support scripts accessing system memory.
+ #
+ #PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf
+ PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
+ #PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
+
+ DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
+ DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf
+
+ # Flattened Device Tree (FDT) access library
+ FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
+
+ # USB Libraries
+ UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf
+
+ #
+ # Secure Boot dependencies
+ #
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
+ OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
+ TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpmMeasurementLib.inf
+ AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+
+ # re-use the UserPhysicalPresent() dummy implementation from the ovmf tree
+ PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.inf
+!else
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+!endif
+ VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
+ GpioLib|Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.inf
+
+[LibraryClasses.common.SEC]
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ MemoryInitPeiLib|Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
+ PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+ HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+ PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+ MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+
+[LibraryClasses.common.DXE_CORE]
+ HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
+ MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
+ DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
+
+[LibraryClasses.common.DXE_DRIVER]
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.UEFI_APPLICATION]
+ UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+ ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
+ FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.DXE_RUNTIME_DRIVER]
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+ EfiResetSystemLib|Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.inf
+ ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
+
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
+!endif
+
+###################################################################################################
+# BuildOptions Section - Define the module specific tool chain flags that should be used as
+# the default flags for a module. These flags are appended to any
+# standard flags that are defined by the build process.
+###################################################################################################
+
+[BuildOptions]
+ GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG -DNDEBUG
+
+[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER]
+ GCC:*_*_AARCH64_DLINK_FLAGS = -z common-page-size=0x10000
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ # Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress
+ gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE
+
+ gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
+
+ ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
+ # It could be set FALSE to save size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
+
+[PcdsFixedAtBuild.common]
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
+ gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
+ gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
+ gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
+ gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
+
+ # DEBUG_ASSERT_ENABLED 0x01
+ # DEBUG_PRINT_ENABLED 0x02
+ # DEBUG_CODE_ENABLED 0x04
+ # CLEAR_MEMORY_ENABLED 0x08
+ # ASSERT_BREAKPOINT_ENABLED 0x10
+ # ASSERT_DEADLOOP_ENABLED 0x20
+!if $(TARGET) == RELEASE
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21
+!else
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
+!endif
+
+ # DEBUG_INIT 0x00000001 // Initialization
+ # DEBUG_WARN 0x00000002 // Warnings
+ # DEBUG_LOAD 0x00000004 // Load events
+ # DEBUG_FS 0x00000008 // EFI File system
+ # DEBUG_POOL 0x00000010 // Alloc & Free (pool)
+ # DEBUG_PAGE 0x00000020 // Alloc & Free (page)
+ # DEBUG_INFO 0x00000040 // Informational debug messages
+ # DEBUG_DISPATCH 0x00000080 // PEI/DXE/SMM Dispatchers
+ # DEBUG_VARIABLE 0x00000100 // Variable
+ # DEBUG_BM 0x00000400 // Boot Manager
+ # DEBUG_BLKIO 0x00001000 // BlkIo Driver
+ # DEBUG_NET 0x00004000 // SNP Driver
+ # DEBUG_UNDI 0x00010000 // UNDI Driver
+ # DEBUG_LOADFILE 0x00020000 // LoadFile
+ # DEBUG_EVENT 0x00080000 // Event messages
+ # DEBUG_GCD 0x00100000 // Global Coherency Database changes
+ # DEBUG_CACHE 0x00200000 // Memory range cachability changes
+ # DEBUG_VERBOSE 0x00400000 // Detailed debug messages that may
+ # // significantly impact boot performance
+ # DEBUG_ERROR 0x80000000 // Error
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|$(DEBUG_PRINT_ERROR_LEVEL)
+
+ gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
+
+ #
+ # Optional feature to help prevent EFI memory map fragments
+ # Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob
+ # Values are in EFI Pages (4K). DXE Core will make sure that
+ # at least this much of each type of memory can be allocated
+ # from a single memory range. This way you only end up with
+ # maximum of two fragments for each type in the memory map
+ # (the memory used, and the free memory that was prereserved
+ # but not used).
+ #
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|600
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|400
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|1500
+!else
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|300
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|150
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|1000
+!endif
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|12000
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0
+
+ gEmbeddedTokenSpaceGuid.PcdDmaDeviceOffset|0xc0000000
+
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ # override the default values from SecurityPkg to ensure images from all sources are verified in secure boot
+ gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04
+ gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04
+ gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04
+!endif
+
+ gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress|0x40000000
+ gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x1
+ gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x2
+ gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x3
+
+[LibraryClasses.common]
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+ ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+ ArmPlatformLib|Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
+ TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+ UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
+ PlatformBootManagerLib|Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
+ CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|TRUE
+
+[PcdsFixedAtBuild.common]
+ gArmPlatformTokenSpaceGuid.PcdCoreCount|4
+ gArmTokenSpaceGuid.PcdVFPEnabled|1
+
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
+
+ # Size of the region used by UEFI in permanent memory (Reserved 64MB)
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
+ #
+ # This matches PcdFvBaseAddress, since everything less is ATF, and
+ # will be reserved away.
+ #
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x00400000
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x3FC00000
+
+ ## NS16550 compatible UART
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x3f215040
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|4
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|500000000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x27
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|8
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+
+ ## Default Terminal Type
+ ## 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 }
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"Raspberry Pi 3 64-bit UEFI"
+
+ #
+ # Build timestamp. This is used if RtcEpochSeconds NVRAM
+ # variable is not present.
+ #
+ gRaspberryPiTokenSpaceGuid.PcdBootEpochSeconds|$(BUILD_EPOCH)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|TRUE
+
+[PcdsDynamicHii.common.DEFAULT]
+
+ #
+ # Clock overrides.
+ #
+
+ gRaspberryPiTokenSpaceGuid.PcdCpuClock|L"CpuClock"|gConfigDxeFormSetGuid|0x0|0
+
+ #
+ # SD-related.
+ #
+
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|L"SdIsArasan"|gConfigDxeFormSetGuid|0x0|0
+ gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|L"MmcForce1Bit"|gConfigDxeFormSetGuid|0x0|0
+ gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|L"MmcForceDefaultSpeed"|gConfigDxeFormSetGuid|0x0|0
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|L"MmcSdDefaultSpeedMHz"|gConfigDxeFormSetGuid|0x0|25
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|L"MmcSdHighSpeedMHz"|gConfigDxeFormSetGuid|0x0|50
+ gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|L"MmcDisableMulti"|gConfigDxeFormSetGuid|0x0|0
+
+ #
+ # Debug-related.
+ #
+
+ gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|L"DebugEnableJTAG"|gConfigDxeFormSetGuid|0x0|0
+ gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|L"DebugShowUEFIExit"|gConfigDxeFormSetGuid|0x0|0
+
+ #
+ # Display-related.
+ #
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes|L"DisplayEnableVModes"|gConfigDxeFormSetGuid|0x0|0
+ gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot|L"DisplayEnableSShot"|gConfigDxeFormSetGuid|0x0|1
+
+ #
+ # Common UEFI ones.
+ #
+
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|5
+ #
+ # This is silly, but by pointing SetupConXXX and ConXXX PCDs to
+ # the same variables, I can use the graphical configuration to
+ # change the mode used by ConSplitter.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|L"Columns"|gRaspberryPiTokenSpaceGuid|0x0|80
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|L"Columns"|gRaspberryPiTokenSpaceGuid|0x0|80
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|L"Rows"|gRaspberryPiTokenSpaceGuid|0x0|25
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|L"Rows"|gRaspberryPiTokenSpaceGuid|0x0|25
+
+[PcdsDynamicDefault.common]
+ #
+ # Set video resolution for boot options and for text setup.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+ #
+ # PEI Phase modules
+ #
+ ArmPlatformPkg/PrePi/PeiUniCore.inf
+
+ #
+ # DXE
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+ }
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+
+ #
+ # Architectural Protocols
+ #
+ ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+ DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
+ }
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
+ <LibraryClasses>
+ NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
+ }
+ SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!else
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+!endif
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf {
+ <LibraryClasses>
+ RealTimeClockLib|Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.inf
+ }
+ EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf
+
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf
+ ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+
+ #
+ # ACPI Support
+ #
+ MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+ MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+ MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
+ Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf
+
+ #
+ # SMBIOS Support
+ #
+ Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
+ MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+ #
+ # Bds
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf
+ MdeModulePkg/Application/UiApp/UiApp.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
+ }
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+ #
+ # USB Support
+ #
+ Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf
+ MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+ MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
+ MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
+ OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772b.inf
+
+ #
+ # SD/MMC support
+ #
+ Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf
+ Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf
+
+ #
+ # Networking stack
+ #
+ MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+ MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+ MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+ MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ ShellPkg/Application/Shell/Shell.inf {
+ <LibraryClasses>
+ ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf
+ HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf
+
+ <PcdsFixedAtBuild>
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF
+ gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
+ gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000
+ gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize|0x200000
+ }
diff --git a/Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf b/Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf
new file mode 100644
index 000000000000..4da8849b3646
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf
@@ -0,0 +1,450 @@
+## @file
+#
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2014, Linaro Limited. All rights reserved.
+# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
+# Copyright (c) 2017 - 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+##
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.RPI_EFI]
+BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
+Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
+ErasePolarity = 1
+
+BlockSize = 0x00001000|gRaspberryPiTokenSpaceGuid.PcdFirmwareBlockSize
+NumBlocks = 0x200
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+#
+# ATF primary boot image
+#
+0x00000000|0x00010000
+FILE = Platform/Broadcom/Bcm283x/Binary/bl1.bin
+
+#
+# DTB.
+#
+0x00010000|0x00010000
+DATA = { 0x00 }
+
+#
+# ATF secondary boot image in FIP format (BL2 + BL31)
+#
+0x00020000|0x00010000
+FILE = Platform/Broadcom/Bcm283x/Binary/fip.bin
+
+#
+# UEFI image
+#
+0x00030000|0x001b0000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+#
+# Variables (0x20000 overall).
+#
+# 0x001e0000 - 0x001edfff EFI_FIRMWARE_VOLUME_HEADER
+# 0x001ee000 - 0x001eefff Event log
+# 0x001ef000 - 0x001effff EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER-
+# 0x001f0000 - 0x001fffff Data
+#
+
+# NV_VARIABLE_STORE
+0x001e0000|0x0000e000
+gRaspberryPiTokenSpaceGuid.PcdNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+
+DATA = {
+ ## This is the EFI_FIRMWARE_VOLUME_HEADER
+ # ZeroVector []
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ # FileSystemGuid: gEfiSystemNvDataFvGuid =
+ # { 0xFFF12B8D, 0x7696, 0x4C8B,
+ # { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
+ 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
+ 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
+ # FvLength: 0x20000
+ 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
+ # Signature "_FVH" # Attributes
+ 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
+ # HeaderLength
+ 0x48, 0x00,
+ # CheckSum
+ 0x19, 0xF9,
+ # ExtHeaderOffset #Reserved #Revision
+ 0x00, 0x00, 0x00, 0x02,
+ # Blockmap[0]: 0x20 Blocks * 0x1000 Bytes / Block
+ 0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
+ # Blockmap[1]: End
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ ## This is the VARIABLE_STORE_HEADER
+ # It is compatible with SECURE_BOOT_ENABLE == FALSE as well.
+ # Signature: gEfiAuthenticatedVariableGuid =
+ # { 0xaaf32c78, 0x947b, 0x439a,
+ # { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }}
+ 0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
+ 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
+ # Size: 0xe000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -
+ # 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xdfb8
+ # This can speed up the Variable Dispatch a bit.
+ 0xB8, 0xDF, 0x00, 0x00,
+ # FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
+ 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+# NV_EVENT_LOG
+0x001ee000|0x00001000
+gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogBase|gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogSize
+
+# NV_FTW_WORKING header
+0x001ef000|0x00001000
+gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+
+DATA = {
+ # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
+ # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
+ 0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
+ 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
+ # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
+ 0x2c, 0xaf, 0x2c, 0x64, 0xFE, 0xFF, 0xFF, 0xFF,
+ # WriteQueueSize: UINT64
+ 0xE0, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+# NV_FTW_WORKING data
+0x001f0000|0x00010000
+gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+FvNameGuid = 9a15aa37-d555-4a4e-b541-86391ff68164
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 16 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!endif
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+ INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf
+
+ INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF ShellPkg/Application/Shell/Shell.inf
+
+ #
+ # ACPI Support
+ #
+ INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+ INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+ INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
+ INF RuleOverride = ACPITABLE Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf
+
+ #
+ # SMBIOS Support
+ #
+ INF Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
+ INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ INF MdeModulePkg/Application/UiApp/UiApp.inf
+
+ #
+ # Networking stack
+ #
+ INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+ INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+ INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+ #
+ # USB Support
+ #
+ INF Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
+ INF OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772b.inf
+
+ #
+ # SD/MMC support
+ #
+ INF Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf
+ INF Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf
+
+ #
+ # Pi logo (splash screen)
+ #
+ INF Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf
+
+ #
+ # FDT (GUID matches mRaspberryPiFfsFileGuid in RaspberryPiPlatformDxe)
+ #
+ FILE FREEFORM = DF5DA223-1D27-47C3-8D1B-9A41B55A18BC {
+ SECTION RAW = Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb
+ }
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF ArmPlatformPkg/PrePi/PeiUniCore.inf
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
+[Rule.Common.SEC]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.PEI_CORE]
+ FILE PEI_CORE = $(NAMED_GUID) FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM]
+ FILE PEIM = $(NAMED_GUID) FIXED {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+ FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+ }
+
+[Rule.Common.DXE_CORE]
+ FILE DXE_CORE = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ RAW ACPI Optional |.acpi
+ RAW ASL Optional |.aml
+ }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_APPLICATION]
+ FILE APPLICATION = $(NAMED_GUID) {
+ UI STRING ="$(MODULE_NAME)" Optional
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional |.depex
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.UEFI_APPLICATION.BINARY]
+ FILE APPLICATION = $(NAMED_GUID) {
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.USER_DEFINED.ACPITABLE]
+ FILE FREEFORM = $(NAMED_GUID) {
+ RAW ACPI |.acpi
+ RAW ASL |.aml
+ }
diff --git a/Platform/Broadcom/Bcm283x/Readme.md b/Platform/Broadcom/Bcm283x/Readme.md
new file mode 100644
index 000000000000..a2633434c7bf
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Readme.md
@@ -0,0 +1,263 @@
+Raspberry Pi (Broadcom BCM283x) EDK2 Platform Support
+=====================================================
+
+# Summary
+
+This is a port of 64-bit Tiano Core UEFI firmware for the Raspberry Pi 3/3B+ platforms,
+based on [Ard Bisheuvel's 64-bit](http://www.workofard.com/2017/02/uefi-on-the-pi/)
+and [Microsoft's 32-bit](https://github.com/ms-iot/RPi-UEFI/tree/ms-iot/Pi3BoardPkg)
+implementations, as maintained by [Andrei Warkentin](https://github.com/andreiw/RaspberryPiPkg).
+
+This is meant as a generally useful 64-bit ATF + UEFI implementation for the Raspberry
+Pi 3/3B+ which should be good enough for most kind of UEFI development, as well as for
+running consummer Operating Systems in such as Linux or Windows.
+
+Raspberry Pi is a trademark of the [Raspberry Pi Foundation](http://www.raspberrypi.org).
+
+# Status
+
+This firmware, that has been validated to compile against the current
+[edk2](https://github.com/tianocore/edk2)/[edk2-platforms](https://github.com/tianocore/edk2-platforms),
+should be able to boot Linux (SUSE, Ubuntu), NetBSD, FreeBSD as well as Windows 10 ARM64
+(full GUI version).
+
+It also provides support for ATF ([Arm Trusted Platform](https://github.com/ARM-software/arm-trusted-firmware)).
+
+HDMI and the mini-UART serial port can be used for output devices, with mirrored output.
+USB keyboards and the mini-UART serial port can be used as input.
+
+The boot order is currently hardcoded, first to the USB ports and then to the uSD card.
+If there no bootable media media is found, the UEFI Shell is launched.
+<kbd>Esc</kbd> enters platform setup. <kbd>F1</kbd> boots the UEFI Shell.
+
+# Building
+
+(These instructions were validated against the latest edk2 / edk2-platforms /
+edk2-non-osi as of 2018.12.06, on a Debian 9.6 x64 system).
+
+You may need to install the relevant compilation tools. Especially you should have the
+ACPI Source Language (ASL) compiler, `nasm` as well as a native compiler installed.
+On a Debian system, you can get these prerequisites installed with:
+```
+sudo apt-get install build-essential acpica-tools nasm uuid-dev
+```
+
+**IMPORTANT:** Do not be tempted to install Debian's ARM64 GCC cross compiler package,
+as this currently results in GCC 6.x being installed, which is known to create issues.
+Instead, you should stick with GCC 5.5, such as the one provided by Linaro, as per the
+instructions below.
+
+You can then build the firmware as follows:
+
+```
+mkdir ~/workspace
+cd ~/workspace
+git clone https://github.com/tianocore/edk2.git
+# The following is only needed once, after you cloned edk2
+make -C edk2/BaseTools
+# You may also have to issue git submodule init/update in edk2 if you want to enable Secure Boot
+git clone https://github.com/tianocore/edk2-platforms.git
+git clone https://github.com/tianocore/edk2-non-osi.git
+# You *MUST* use a GCC5 toolchain (*NOT* GCC6 or later), such as the one from
+# https://releases.linaro.org/components/toolchain/binaries/5.5-2017.10/aarch64-linux-gnu/
+# GCC6 and later toolchains may result in Synchronous Exceptions. You have been warned!
+wget https://releases.linaro.org/components/toolchain/binaries/5.5-2017.10/aarch64-linux-gnu/gcc-linaro-5.5.0-2017.10-x86_64_aarch64-linux-gnu.tar.xz
+tar -xJvf gcc-linaro-5.5.0-2017.10-x86_64_aarch64-linux-gnu.tar.xz
+# If you have multiple AARCH64 toolchains, make sure the GCC5 one comes first in your path
+export PATH=$PWD/gcc-linaro-5.5.0-2017.10-x86_64_aarch64-linux-gnu/bin:$PATH
+export GCC5_AARCH64_PREFIX=aarch64-linux-gnu-
+export WORKSPACE=$PWD
+export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-platforms:$WORKSPACE/edk2-non-osi
+. edk2/edksetup.sh
+build -a AARCH64 -t GCC5 -p edk2-platforms/Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc -b RELEASE -DBUILD_EPOCH=`date +%s`
+```
+
+# Booting the firmware
+
+1. Format a uSD card as FAT32
+2. Copy the generated `RPI_EFI.fd` firmware onto the partition
+3. Download and copy the following files from https://github.com/raspberrypi/firmware/tree/master/boot
+ - `bootcode.bin`
+ - `fixup.dat`
+ - `start.elf`
+4. Create a `config.txt` with the following content:
+ ```
+ arm_control=0x200
+ enable_uart=1
+ armstub=RPI_EFI.fd
+ disable_commandline_tags=1
+ ```
+5. Insert the uSD card and power up the Pi.
+
+Note that if you have a model 3+ or a model 3 where you enabled USB boot through OTP
+(see [here](https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md))
+you may also be able to boot from a FAT32 USB driver rather than uSD.
+
+# Notes
+
+## ARM Trusted Firmware (ATF)
+
+The ATF binaries being used were compiled from the latest ATF source.
+
+For more details on the ATF compilation, see the [README](./Binary/README.md) in the `Binary/` directory.
+
+## Custom Device Tree
+
+The default Device Tree included in the firmware is the one for a Raspberry Pi 3 Model B (not B+).
+If you want to use a different Device Tree, to boot a Pi 3 Model B+ for instance (for which a
+DTB is also provided under `DeviceTree/`), you should copy the relevant `.dtb` into the root of
+the SD or USB, and then edit your `config.txt` so that it looks like:
+
+```
+(...)
+disable_commandline_tags=2
+device_tree_address=0x10000
+device_tree_end=0x20000
+device_tree=bcm2710-rpi-3-b-plus.dtb
+```
+
+Note: the address range **must** be `[0x10000:0x20000]`.
+`dtoverlay` and `dtparam` parameters are also supported **when** providing a Device Tree`.
+
+## Custom `bootargs`
+
+This firmware will honor the command line passed by the GPU via `cmdline.txt`.
+
+Note, that the ultimate contents of `/chosen/bootargs` are a combination of several pieces:
+- Original `/chosen/bootargs` if using the internal DTB. Seems to be completely discarded by GPU when booting with a custom device tree.
+- GPU-passed hardware configuration. This one is always present.
+- Additional boot options passed via `cmdline.txt`.
+
+# Tested Platforms
+
+## Ubuntu
+
+[Ubuntu 18.04 LTS](http://releases.ubuntu.com/18.04/) has been tested and confirmed to work,
+on a Raspberry 3 Model B, including the installation process. Note however that network
+installation and networking may not work on the Model B+, due to the `lan78xx` Linux driver
+still requiring some support.
+
+Below are the steps you can follow to install Ubuntu LTS onto SD/USB:
+* Download the latest Ubuntu LTS ARM64 [`mini.iso`](http://ports.ubuntu.com/ubuntu-ports/dists/bionic/main/installer-arm64/current/images/netboot/mini.iso).
+* Partition the media as MBR and create a ~200 MB FAT32 partition on it with MBR type `0x0c`.
+ Note: Do not be tempted to use GPT partition scheme or `0xef` (EFI System Partition) for the
+ type, as none of these are supported by the Raspberry Pi's internal boot rom.
+* Extract the full content of the ISO onto the partition you created.
+* Also extract the GRUB EFI bootloader `bootaa64.efi` from `/boot/grub/efi.img` to `/boot/grub/`.
+ Note: Do not be tempted to copy this file to another directory (such as `/efi/boot/`) as GRUB looks for its
+ modules and configuration data in the same directory as the EFI loader and also, the installation
+ process will create a `bootaa64.efi` into `/efi/boot/`.
+* If needed, copy the UEFI firmware files (`RPI_EFI.fd`, `bootcode.bin`, `fixup.dat` and `start.elf`)
+ onto the FAT partition.
+* Boot the pi and let it go into the UEFI shell.
+* Navigate to `fs0:` then `/boot/grub/` and launch the GRUB efi loader.
+* Follow the Ubuntu installation process.
+
+Note: Because Ubuntu operates in quiet mode by default (no boot messages), you may think the system is frozen
+on first reboot after installation. However, if you wait long enough you **will** get to a login prompt.
+
+Once Linux is running, if desired, you can disable quiet boot, as well as force the display
+of the GRUB selector, by editing `/etc/default/grub` and changing:
+* `GRUB_TIMEOUT_STYLE=hidden` → `GRUB_TIMEOUT_STYLE=menu`
+* `GRUB_CMDLINE_LINUX_DEFAULT="splash quiet"` → `GRUB_CMDLINE_LINUX_DEFAULT=""`
+
+Then, to have your changes applied run `update-grub` and reboot.
+
+## Other Linux distributions
+
+* Debian ARM64 does not currently work, most likely due to missing required module support
+ in its kernel. However its installation process works, so it may be possible to get it
+ running with a custom kernel.
+
+* OpenSUSE Leap 42.3 has been reported to work on Raspberry 3 Model B.
+
+* Other ARM64 Linux releases, that support UEFI boot and have the required hardware support
+ for Pi hardware are expected to run, though their installation process might require some
+ cajoling.
+
+## Windows
+
+Windows 10 1809 for ARM64 (build 17763) has been tested and confirmed to work (after replacing
+`C:\Windows\System32\Drivers\WppRecorder.sys` with an older version, since the one from 1809
+appears to be buggy across all archs, and results in a similar BSOD when trying to run Windows
+To Go on x64 with native drivers for instance).
+
+Windows 10 1803 for ARM64 and earlier do not work due to the presence of a hardware ASSERT check
+in the Windows kernel, that was removed in later versions.
+
+You probably want to look at https://www.worproject.ml/ as well as the
+[Windows thread in the original RaspberryPiPkg](https://github.com/andreiw/RaspberryPiPkg/issues/12)
+for installation details.
+
+## Other platforms
+
+Details you may need to run other platforms, including FreeBSD, is provided in the
+[Readme from the original RaspberryPiPkg](https://github.com/andreiw/RaspberryPiPkg).
+
+# Limitations
+
+## HDMI
+
+The UEFI HDMI video support relies on the VC (that's the GPU)
+firmware to correctly detect and configure the attached screen.
+Some screens are slow, and this detection may not occur fast
+enough. Finally, you may wish to be able to boot your Pi
+headless, yet be able to attach a display to it later for
+debugging.
+
+To accommodate these issues, the following extra lines
+are recommended for your `config.txt`:
+- `hdmi_force_hotplug=1` to allow plugging in video after system is booted.
+- `hdmi_group=1` and `hdmi_mode=4` to force a specific mode, both to accommodate
+ late-plugged screens or buggy/slow screens. See [official documentation](https://www.raspberrypi.org/documentation/configuration/config-txt/video.md)
+ to make sense of these parameters (example above sets up 720p 60Hz).
+
+## NVRAM
+
+The Raspberry Pi has no NVRAM.
+
+NVRAM is emulated, with the non-volatile store backed by the UEFI image itself. This means
+that any changes made in UEFI proper will be persisted, but changes made in HLOS will not.
+It would be nice to implement ATF-assisted warm reboot, to allow persisting HLOS
+NVRAM changes.
+
+## RTC
+
+The Rasberry Pi has no RTC.
+
+`RtcEpochSeconds` NVRAM variable is used to store the boot time
+This should allow you to set whatever date/time you
+want using the Shell date and time commands. While in UEFI
+or HLOS, the time will tick forward. `RtcEpochSeconds`
+is not updated on reboots.
+
+## uSD
+
+UEFI supports both the Arasan SDHCI and the Broadcom SDHost controllers to access the uSD slot.
+You can use either. The other controller gets routed to the SDIO card. The choice made will
+impact ACPI OSes booted (e.g. Windows 10). Arasan, being an SDIO controller, is usually used
+with the WiFi adapter where available. SDHost cannot be used with SDIO. In UEFI setup screen:
+- go to `Device Manager`
+- go to `Raspberry Pi Configuration`
+- go to `Chipset`
+- configure `Boot uSD Routing`
+
+Known issues:
+- Arasan HS/4bit support is missing.
+- No 8 bit mode support for (e)MMC (irrelevant for the Pi 3).
+- Hacky (e)MMC support (no HS).
+- No card removal/replacement detection, tons of timeouts and slow down during boot without an uSD card present.
+
+## USB
+
+- USB1 BBB mass storage devices untested (USB2 and USB3 devices are fine).
+- USB1 CBI mass storage devices don't work (e.g. HP FD-05PUB floppy).
+
+## ACPI
+
+ACPI should match the MS-IoT one. Both Arasan and SDHost SD controllers are exposed.
+
+## Missing Functionality
+
+- Network booting via onboard NIC.
+- Ability to switch UART use to PL011.
--
2.17.0.windows.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v1 edk2-platfoms 2/2] Platform/Broadcom: Add Raspberry Pi 3 support (non OSI)
2018-12-07 12:05 [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Pete Batard
2018-12-07 12:05 ` [PATCH v1 edk2-platfoms 1/2] " Pete Batard
@ 2018-12-07 12:05 ` Pete Batard
2018-12-07 14:08 ` [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Ard Biesheuvel
2 siblings, 0 replies; 6+ messages in thread
From: Pete Batard @ 2018-12-07 12:05 UTC (permalink / raw)
To: edk2-devel
This commit contains the edk2-non-osi components that introduce
support for the Raspberry Pi 3 as a platform, based on the original
work by Ard Biesheuvel and Andrei Warkentin.
Usage of the Raspberry Pi logo for this work was obtained with kind
permission from the Raspberry Pi Foundation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/Broadcom/Bcm283x/Binary/License.txt | 26 +
Platform/Broadcom/Bcm283x/Binary/README.md | 41 +
Platform/Broadcom/Bcm283x/Binary/bl1.bin | Bin 0 -> 18801 bytes
Platform/Broadcom/Bcm283x/Binary/fip.bin | Bin 0 -> 41714 bytes
Platform/Broadcom/Bcm283x/DeviceTree/License.txt | 340 ++++
Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dtb | Bin 0 -> 25617 bytes
Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dts | 1263 +++++++++++++++
Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb | Bin 0 -> 25354 bytes
Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts | 1259 +++++++++++++++
Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/ComponentName.c | 219 +++
Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DriverBinding.c | 269 ++++
Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.c | 1644 ++++++++++++++++++++
Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.h | 159 ++
Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf | 52 +
Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h | 782 ++++++++++
Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/License.txt | 340 ++++
Platform/Broadcom/Bcm283x/Drivers/Logo/License.txt | 10 +
Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.bmp | Bin 0 -> 185398 bytes
Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c | 159 ++
Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.eps | Bin 0 -> 250982 bytes
Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.idf | 18 +
Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.inf | 34 +
Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.uni | 20 +
Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf | 63 +
Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni | 19 +
| 19 +
| 19 +
27 files changed, 6755 insertions(+)
diff --git a/Platform/Broadcom/Bcm283x/Binary/License.txt b/Platform/Broadcom/Bcm283x/Binary/License.txt
new file mode 100644
index 000000000000..b98dc643227e
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Binary/License.txt
@@ -0,0 +1,26 @@
+Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+
+* Neither the name of ARM nor the names of its contributors may be used to
+ endorse or promote products derived from this software without specific prior
+ written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/Platform/Broadcom/Bcm283x/Binary/README.md b/Platform/Broadcom/Bcm283x/Binary/README.md
new file mode 100644
index 000000000000..9811a1286093
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Binary/README.md
@@ -0,0 +1,41 @@
+ARM Trusted Firmware for Raspberry Pi 3
+=======================================
+
+The `bl1` and `fip` ATF binaries, found in this directory, were built from
+the [latest ATF](https://github.com/ARM-software/arm-trusted-firmware)
+(commit c3859557) using Linaro's GCC 5.5 compiler with:
+
+```
+make PLAT=rpi3 PRELOADED_BL33_BASE=0x30000 RPI3_PRELOADED_DTB_BASE=0x10000 SUPPORT_VFP=1 RPI3_USE_UEFI_MAP=1 fip all
+```
+
+This results in the following memory mapping:
+
+```
+ 0x00000000 +-----------------+
+ | ROM | BL1
+ 0x00010000 +-----------------+
+ | DTB | (Loaded by the VideoCore)
+ 0x00020000 +-----------------+
+ | FIP |
+ 0x00030000 +-----------------+
+ | |
+ | UEFI PAYLOAD |
+ | |
+ 0x00200000 +-----------------+
+ | Secure SRAM | BL2, BL31
+ 0x00300000 +-----------------+
+ | Secure DRAM | BL32 (Secure payload)
+ 0x00400000 +-----------------+
+ | |
+ | |
+ | Non-secure DRAM | BL33
+ | |
+ | |
+ 0x01000000 +-----------------+
+ | |
+ | ... |
+ | |
+ 0x3F000000 +-----------------+
+ | I/O |
+```
diff --git a/Platform/Broadcom/Bcm283x/Binary/bl1.bin b/Platform/Broadcom/Bcm283x/Binary/bl1.bin
new file mode 100644
index 0000000000000000000000000000000000000000..e25138828d0a4ddb24772abb1a60eefc334666b5
GIT binary patch
literal 18801
zcmeHud2|%#mG7;pmedFVtpy|tJ-S*z4DF582<)+{TLO%YF^IMyw%@2*ivhC;Enpe2
zRTA<tmgA=aC3r9swODMrCx7^1@T3zb2%DK?Lf#29G?V1z4J{zXv79_;z^G+F?{}-Z
zge>Dp&Ya2NoOkF$@l}1x-M+hhw@Q@U820D96C>N0$f-gpvNVO-6r%k^_LFjhV53f>
zzYYB^p(#wZhayBm(40?m)v%ZRF-jkU{?@RJdpUDVq_0@Qvl>>=KM8BSMAN6D9c2X^
zv}!gTC9-IZXdTh<nuF*_F~<Dabe@Q`4z%dg`yWETSD&vxw>l_aE5oz<u%x-Mt_I@=
z6^f(*?g@d~PT~5aNNv#+%2G)!>6A)Ol0}J=O^M4yanPmrUEBE6z%_}qi$f`XQKFzu
zlVZ_?G$rnX41{DgYzORyWMj?6p-TMP#*g+gylWdj3`8X%sIOlv1lmB)R$NV@Mf2q+
zY4d>}JWrcSYDNxGR%4SA-?^DI?>kETG0>;<^-cF@D)C*r!0X4PiJ}^Q9sQugsR%T^
zW2zF8L8m(ZKusahN`})&<nhl?LUy9+i<w(<d3`h1M5RpU#l^0`wT*}SX*21%1imhU
zPUcNemAKC1ZY6&CX)*AHBnEe$A?>mx1t%~~5>0PQR^krEJ6wr3iAo6aZSmWc_!Ag6
z`56X&xUWmf4DJH$r=?NBrxUaj_-e#D|7a!d7m4LPR23=2^S_NbBGxi5Ce4?hcK6f$
z3TXVu>I#)XZeBsnU^%~vzTYcJS`*qLzY-q@C2Lj%?d)EP7gLhfKy+cZh2moYa~$X{
zx3%XUwhAHXdf#-#Z|vK6?76XLKQ{Io`^9@z>$YethdSW8QZ5C&;8{(g13fpB7t2Z#
zv}wTee+aU&&~*P;CC>ZC@)`!-q9RS70s5}E1#NvkX*|Abte|y4K4Ov@&cGb(htrS!
z?UHhWQSQh3M%HhErgcf#{e7FzN8o|+H4LXX!y1D17Ravw@_ZjU`DI^Uc2vsJ_nzf=
zrMw8T{AXPU*sfUT3wKkT?+aC<bwGw9De+Pgy0M=g=$J0&Ya0&+1VIh6-ju<Pc#Vv`
zxVG`oUb4_488RjCX~^+rc9W#N2)U@RbJ%UGLl!h2_J5$wD2esZiB|H98rptaG+{Rb
z?`Abg<Nbfx>k5sBtYoZHy#nk(iF>b7Kn7plG-GWM_MT}fv`}>i_+g$!>kYVAtMjMZ
zKkRxSPMv3q!LuE3blU*#eDKfoFz*JxKk3(-OVEQ%;4th*3YIr1fsrJ(5J@e0*s~Mh
zd0nc3pKa36?~nW8oE_jZ2E+0tU<o9&L?uhm`e)&NbstQ*jvlxV@UesUfo;hxCu;)y
zb8)?|=Zqvc?PTfhg!~*9(h6;K!PVE-uN%59sIE}y(y=|nx}e_B1%~Bnc7=Gq3awQA
zngJu7<>zV^LM%V#S;F3RL3YfS7qNwP(4B`1epbOV&*!-U`W><occEV%(9iz15;#~t
zHv{J~&~p)X+?PhxycbtSQ~c)^@_Yhc#^cMuUlRBm@<L_LSt-f+2f*6{-VTB{A9%B1
zY&>*>{SoGslw<yPvF^amWNq8$n~tBeQ2Kr`yX9x#wXS|#&+nm!93u$yvEMu`Wd$YZ
z0sI*FDLnam*tH7XfB(4|J*)!~;KDY8d;0peMS=ec{NW9KF#I&jq?|9S5-$RMEEh#I
z^i`J+#@x_ZQ%2^P1^vx@A)XauojPD0$28`L<)q6J^Bg(AorrNhU9JYbO#6$Vk8PA`
zG-I1?2mTbz(EWqD?jJ-v(_;wwMQRF*7Jp2<MDeJ-Zl4U>xnU~@1Li!YAs@Crw^@mE
zJEv8N!xy*iIXqtPFMdslV^5CpSP{AOIqo-<I9)>j-O4@(<co3b0C4Mm2z>pGL|JCs
z_Scg326Vj>zPQ7#guJ=UC5TLVy!49XQEbg6O5#}+;Onf*7m-!0mNBN=N<p%=2(THy
z`+O4T8m*3;WR2sS-uGaVW;O5q7Gu0M33`<nH~XR%Z5QzCFpnl{4+19pY5m!gq7~qI
zD(E!j%eu_A$MRtv=G@_OCdDsv4kEhZGkH&-Pcn3lpE*W%Nh5=WiGDBijN|Fcx^87U
zFCz~a9RI%&eyS_(7ziKFCj2`G!C(E2@DqL~LA#o7)iz%5+r}}~dpbq?E$-E1S6ufq
zWYzslANsu4kyBufTd{&~mmve>Q$5%FvW<L-oTf}NB{e(^`_Wc5M9bWi`L^M2g&^Cx
zDrUA^fensqRsvDTMTY(PA(O`EYI`n=g#1N`A3|%|8{6KE+~_9(LH?@jw>DWdQ~o5Y
zCCK+eYQ7j!pl>qyYZ_h>Cwf!Shv$Y|3VDZ9h;3(06152rzgE&E_-n-MZDBF`ZcHI1
z<UlNH)MG2+oSLDHfG#L~SMH~*ZDGP3pZMRVh?&NGfhc6cFxPgNYtu3{2&rup>r&s9
z8Dulo!>&Ve8fDmJs#eXpdo#6Up0{e#7UT!IFW2?2AWM4-F#Z5qXW(MGng6G8uYzxp
z-YXF-N~n;;mHn`Om!<2yU{gX(;2CpZQ{u`_6W9Ea+GfBcFvofh?m~X#BzP{-We$D3
zw$X@rr=ioFC%dpG;1$=7@S!As%#CLUiAMzZ4gopP=p?r5p9FN8ZKE_(4`4T~wJ(j*
z_vcyQWcnR!r#Ksw4Se>K_P2Om3_F89ZA-&FVtO^(5%$Bw`PoQ?G^}@8aj)lL$TPdx
z&H#^gkJ2*03)>mb8I_m=o~P;K%d@pP=;M6rIlawvehFL*hv)ReIh(CLi19Cwo9XL*
zkfU)d(C>S4wCRbpld<-O-G02cQRn|A@%#sOXq=lf-)1f~R-i2Ajo{P#z->nibm%@!
z4cmYVdKw;%wsZUU!`>x<SSNBN{|9e|qd(Xg>qKtk{q~z-<$d&X&eQuwSbq0lOvHTb
z-xlzKSdbiK-%sg$)?2@i&vyLGd4NMr)8wVz9wRo~$cxxM1xrE1kym^ix!8q6rmkGQ
zL+b&r^Pq3rERYN2g&^9NiT$ceRzkYZ16%^!Mv*cuL03fNBp(qS5a+02j^*W@X<B}o
z__kQ@=s5v?33%*j^)WBwc!Bj3UcX)~;q!<$gKcw^^G)DjnIS&vd-gP1$fd*&+ty_{
zAUFFJ*0b)JI>$7yKj3&j9kwBW4#c309iX3O(&cZ=Xv)z2eJasNXOXS=xIm+(;4D%t
zlbYKIzAQ9yN+G=zQ*CN4)#qhwhJPwfb02R<j>P&<4Et@LK-DhrK$J7ZVR0RIytV8&
z&y%PzEakov<9Sj_V|Z7NKjt7Q=-Ub3W-EyJ-a(Fuc|w{R_Qeo4U~i`-(dlhMj$cNa
znykdjn$qDLp)=r9w8G!P9_wzRW5|nPx0LaB@bxS|Q^!7p{&IfIGHJpXby_rz!T+Sk
zU!#8$`VYD&g7c`x=kFUiz*qFxS%Z1-snu+Ud<GQ+<$m(BKS;@-<i--zA8KSGC)x5M
zIpEpcU-%S{JmHb!r23ANWhwM9FA{Bd1vQ1dh!;9eU3t(?)E}aG5rGPD<wZKscAzB(
z`gS}JaXk3waR<-GC7;H6*!C|#54R?-ztnBj$Uk+xhn{fj&8GJt8$AzVd+UO|nYjnY
z?H<74^Y#8~ecLk0I1eA@IQXp_`M(+SL1*IZ^rNrp8SDl&;M|FGVh7?p;+gY%*uMt>
zhkcidGdah4K6`fDsl*=wF7EHdS(DF%9Yun+F45;lzOeHy?7e`TaFh~SEU6i#MBSf4
z$Mmykxp5Y4f{j#}YXGAb_l(1V_I-|{&~4VC4<u@19h?N)p)dQU>oV)Nn}5;IG=?Ae
zpr5CXmgGPg<mOhD(5|g1fjw_q1Mfc0eqWi%F~lm7hwTb6!I=lREI(CLW~#93q-1Jq
zOD63q_QStf)DD)SZXj6#{>_5szYBgTS<Uc2jlPuPfImgVH5-={=-7<93f5WRV_4s>
zZTy8!TZ1e``T)z6y?q>22Otak&tZ4TY6-PA=Cbcl1e{fHk@ZlnK&U&(c^dIKr{45)
zKMjb=TP69(1#};QTpGE~d$sN{+8Nl4;D4i}BebiAtgnaVv+u^-@DpChF%9igkfCme
ziQ16^dT>s+p$~PLvERI`pC^PMVn~qd5Is1<6oH;AQc~~>DFrqx1TIMy)Nzu7?8iiD
z<PjrIjSLn6-jnD%EoPxF3v$g07FpDiMd<rT%tT)%$FraWc=OQ*eLhc}c^a?j&yV!F
z!Qs76Ko(4cA2wB(=81Jc-wQ2I##B7J^!ugoxoWrzGAvAcCZ^!NQNQ=bqABg$Sr_<H
z+yxPWuVb6>VVvNzI5$BpE%E$dM2|OIOSHO=^BSHjq(#GIjfQ1Xbyy}GL&pvVnsF9*
zg*tz0u^Q)_f3bD`7P1UBQ}Uxx$jnF98G`?nl4cT|&6||1|BL+-;4+QPD$iT7k8^kW
zaP4uy_FmXR7W4_hXuBF#t^OGMuc(azrx7C!oW>scUlpJ>d&3>&r0vW`EVUzsvTu+@
zZP!%96UfrcFIj%(81faw6~k9DExJ6g4!YrCSukDsfT1iU#0%sIxG%$gig;#P__;!d
z@zX#h`c2(q`!{i5f1MVblSG{HBpLN9rb`{K?H}ah!UN7ttWRu%9Ou5vbmdV^CulMB
z$A}s1w+@SxW!RHh^ZaR`0l9`7Ie{4~YoP<>$?e;xA_me@&Ldxp)n;V|%S17FF}r;`
z^Sn4OGuQ$6W#Wc?g|s2I*tT^$?|&_xr&+0n$C?y1T#Gd?fgS|aEY!<N;4hwIS-pV1
zT9Jb7sZ{MvuHVOf<bvNv-&g7Tp>9)O)+PnM<QNXy%7fha9Jvnm7hh=!0A}}e8rjmz
zdY(+jSQcz^aVg2^e}Lj_d%HJMXdd)E5A_B@PW0iXywN+_DV^lsZAWe9^?c;5&y4%s
z_S3+Tg*o>_2Gbg{Mz?*R(og1}*xm`a{u!u!rck=S0sd;E5^9%drI<{f@~ui>Yr~7j
zm(Zw|%a~U|mX=bIx}n?0QdZXXsPYrNQ43}4LhSQNsNao1+$8A;a^)7*7tZy37~?p}
z_ml$P&aq&IUfX&dvG~F`sdPgWbG*n4XxxeIs!03U{u*dxx1tvJBA@g`QE!}xKIXwU
zS_z$z?r=t>+~BK_HLA@${s)x!4$yyE$`0BoyZh64pGN_WW3XoKeM(3H>@L(u&TXpO
znnEf6=(-Q*BH)Z#lzqH@PXohDflnI^|C1ZEC~C>OQz^a;@LBiXoyzgQDICR|r_k3R
zj_mec?enm&VjGRZCvxmL_eR~8Kf;F(^i}bd#epwtXT#6`T=(<iQ9qfTPWvYy2Ir$D
zV!ua;Ifj#GEcU(OZY6eT7<mq&ZA5E<9haikWwH3f#kS&J3uxfBBaLJG4WB$pNNQo-
zIEg*lkJ_GH7}br~bd1lRWv!mxy+g?(0)D$Fc0bJbz<mn$pQe&$Xb$o}=&uO6Rt_2W
zc17dg_Ee<Ofpg$#6<Lp*MgL)m_WvPA3H$>4-$2RTk0jBtru;{G|M+Tq?spJ7+QroF
zGI>rf&MKaNr6ETOg|u$ei9H8FyO-wlHlkmFd>SaVyP1Zxs9WarvJQQ6XM3()KrL^}
zyxy}j+H+5lW#zv@@6I9LKFx9j4dq*uz-I7Nj`{5(bni8#mu;$cCuwoaF~=Df&(X(i
zo?c&K4)UJtBJfa3L%S;qjJ0mS=X&%Nwma;vn~d1w1<Zd({llnjXX<tEFrNMSEHCPw
z2bdq^!>4|WWl7yDphNq=Me%g-MjWdYyVil4SQ?%k7UR6>gUzx35ODr9=k)7G;;jF_
zuMN<d0q1|iuivO&aQ?yXN4yzIyc4xCBVJ|&Sr*ShFMC;LdQM^bz#HcT*5fS5fzJvY
zcV{9F_-1iFjdud)Up#I{jolCa%5ovA<#G?nhK$OcI8$Iw0|_fvV;{?ao7cD}2`%P4
zyG6OsfjXrFF^|uZZJ<X@g^fdR$^nmkbp>#-y;PPcArb34ku$RFnFcTBFb$j0*Z8J_
zbG6h$*h|#$y8YMsJk7a!-hZAxw`)zJ68|5_{ooVY?!_g;XY!fCTO!QVa~GZekN2|7
zS$=$7kj4a4z%TgQFPxtlar9JganOtVg!6YqWU=(53-s*7e4Yp2)28yg80OLPeL~Eb
z<HMZ4zv&#$SLS>db1nkT>wtqp5&TI;Fp9n5_R~cBf6>Z-Pqbm54EX#m(+fI2!#c#1
zHsqv7-Gq00uy?WwZ!1FS$v<F>b9g?#$awbaX9(z3p0b7V>bJ-_N(=MK{q&%+g?(!@
zyFHitE@K@*z9Qb4a4nSJpLtIOoS#dPcOu`77vdbudr0s#{4AqR%lmA~(99Q+KZcP%
z#*kx%kz>ZbhnO!QmvkVPJdAsD-f#FG{!2j32DF3(E9v$1?*ry3iMl(GTaUr{^pvE;
zx?o4wTa-AT%P^*KtY;lP_a$m`uRtG^F%bcm%z0WGYU0qtsn~n_tHUGh4@fvCWd*0;
z`IYY%2b#ZE6li+W9Z+9!1)@^>NdnJKjNOIH3)%i&vIjo_j$giJ;A<C1vndZnCgaKg
zJx33x2f`}F=ZebvVc_48*iX)hSU1>@UWXpLp(6@p#PTU#AlSw~F4$OJBIGY!Zx2h+
zgQy!xsqK`c*S8ui?jFR(R6bX5O<z^%7_a5Cp#03j<8qqvK0oIJhJ=glQEA<*=aygT
zla0P16O_OZB`4y<H9~O(M%Z#9lW?Vva|afo9YVR0)VqrUsjj@p(2|@;+O*<8nw%54
z2iNciX9tGw#JXKM5nJ(`z(VwCN3mwY+`zn}qa)AZ8dmUdU|1dIdKvz_z=%bFk1KuL
zBZ0|0w=*Y_x>Sj$?id{zI%$63uA;oid|bl{9t#XZy9U<?WkF!Xq`b(ag?SO?4ez)E
zr$-2Zv)N+c6T1}n^iE6Qv-^?)pU+4R{HZV{aDJ{e5PN(`;L?)Rz!#-M13k;q0=-qk
z0#~0O9>{PNL}Cp_t{Y8J0LKM5Zonx5oMOP44LEZEXD;A83^?-u=Mlhp6maGP&SQbA
z4N5%El@q!8{DJ_}^C#@-^^FSrVLN;T>H??_Txg+qY_k$S|FcDb4Ahcr(7VaFU_;qw
zV1sIwQUE>LUxc;S(C4MnliZ(#y2TzF9aG2s^L9#u{Y{_?MewJzgEZ<SZ3gBi_4OU#
z`JZ6^-FS`y&h7_<g`eU6EY3^KSdaW++kLpM<M}1%UI)&{W9flN`TT{)o1hnN`D4!O
zT8iKwiN?MzzcdtnL~LPw*#*67hc98?{_MI9|H*ahtvAIdf~HBJm)kQ;Z<=!aWzf3|
z^cEs#9Giq35j2C&&p7w8;4H&uqzVh|Zzr*P0_rXHG$jU^c#_hTef%!vWyBAA78TfG
zLx;ed9WlNM<MvIBd-?uj^c9l>d8DNq{@WwhF;B>U@XWF({(KYs;MdpKflp;PI&4vg
z%`#*B-s^bZ2K-DL>LWUBP3SY`TJ*Wtuk2EVF6;t~v9?2dC0pZOw?fA_rvM%M$3jOW
zz;?r@Hi8a)KOhU^dlbj(=JzQ5dj&twxeU+at07SfxQz4Ix@>CgSg*wW>$xsL@XKoW
za^hVta<-8BnVbwa&X9PItov79b8+#(z@-st24cRG*B`+8k;tokxOa3G&D@!)*U+Dn
z;YV>FKMk4@JDq$^SE%qL^2Ev39A!h+du_P~5N|JlHuzZQ#l?sAnz*kw0LKyokBQ?l
zbagNe0*(&k42N_a#`}-K@M8)1mzEsbd%eMUkB#p;_B$k+CgO6h%3GXo{V3O!M;Y!-
z*2QkLQkoJfr#q%dX^1U|FQNsPP0c7LF_rtukr!|aUs@tzY%FRD5@e+J+bG0&1Irpd
zTW`<7Ci#8r9LT9N3po<oC-~v|@^$3>z|rdPXKILJybrAoISb$3B<}sVw^6(Udm~sV
zzJ>XLox=xIcR@$;@y@|*8J$t83e_BAcY>CD&^)+bMjzAU$TDOuV4aWXe!@GH1g#l*
zi*eQ$9(Mq4VFIqn3#vr=ILAk>IpCa)cRS;ePv9K0b4-L|m|Gqbk&q8cXgP**4q`!#
zV-I*p68y1dN(#Q*^Wv61QewMp&D$+D<J&66Z^4{W*cI!Kw7jB#ZDl;p27Atz7Bo=O
zN*O$QDe2J!&ANQC4_G7VIp(<K<pq}IV++c$j%|kLC6jREENDFi+ho6a3H=iM+IU=D
z(pbn}z;_F<A^4C&BHey>F83CcEtd<7Z%Zutdw^>jf6VWc``=f-a|YiG;cR_LlAKTG
z(PF&ccS_d7+r6sgZPeH<EC(+5=X4Rii=GkEJC~0yIDoSv*J#)WAtyb6T)#RKda{b?
zLe0~Pxp=SlsGUZx{0?~K8h&ju&fLf`I0whsYf*bLP42{e|Hls<qt0n9<ZqbSgZzQ_
z%`1)^YMueiZ(y!%4E5I~InQUBxi-KxfvGs7J>XIFvwsfJ(VQxW#`S@0jC~urq@pGn
z&BeQwHmU}0&5=u<Q5Zvxr;ph?g=!V&J}dmLy;Z38BKP_^XtQ_Xe0~Rccn#105%{w2
z#yHP=PpEFp(Z8`s=W)c!Z2JkoNhi;1y!MwuHQ}uGV_p*#s{J^V+CLSlyG9xCT!7bw
zHOMQgQOoljg05_(o*BME<GmJgsVr|krN95tRQPME#yQf%V;6A-f8hL!TQ<P&48t6K
z&3*sD8jRgoqlVb${fK%#=#_GhK&ck_akkwKxu3xvp+4Z`+9{v$Ij>{bUf}!!zK`iy
zpP=Uy_M7S9F@`-lK@W5w%rz|RwWdg!Ed+h{q88i)_`L5sBw^@9;Heq_yEg%QLjrcG
z^mW)3;FV!F!{3<jy<(0I-w*h^QJ+}>9J^6B;qxrxIhjg}OrH2V6}*=$xhUm275J?k
z5)EAd8V1Xr`C<6Xt1m$hZ0T#fdI!kf3;BNInuP3GK3D_U3r>?JrpIv$XfW|JExgxP
zai(N>aGma?c*khgWfk@Un_nctAC!)x>Upr?Y}DANL$*AQ+$<Zq*TyxaiMWqSc~0Fw
z;0$ltEq}juqqg%iy|&Z;zQy={#Yupl2mGwx-kt4FneT86zeu-#w<T~}0=Fe_TLOQv
z1k~_9UG3ZULtKCHlK;YqGGg>L;C|~C;a7nFdEl<UMfknIzXZ6K-Xi=e@XrA5f?I^&
z5B%A{opX!ucLM(v)FgXw{THhBUkoY={Qm~rzrIEI`R{bDZ>0E`l7}My-tg4%Q>Ao4
zSk&iP*~{Ne{Plk_YRTKc`&+k&e|-B9ejd2%ZxMbk@Gk-GrMC#b3j8yGyWke#_XB@6
zaOd12{GGsmr5E;(>#wivU&jyy{(l4RU*979U#IAH&ut0ZmcVTZ+?K#?3EY;z|L+o5
zKjq#@6KX0~Rr+cxC(h!hd#21NxMx}U)Pm_Vr}LjP8$b8D6|3sxS@PujXHC6-*7Qkt
z%L}U3%Tp%d-{b;Jc>~4VoBg7R&d&#pf12n&ffs)Re^(O^1&RJ&<0C-+{ZP@H{{L3t
zgIWHyCR+UMr~dmi(XPTrg!~(qXs;&vjb5VH63=yJ|JwVEA;p}LXcPStCeL->EibNG
z^TOTo6OT@$5?}4wvdWs87vzO2<f-ywRTY)1WH%YpX0I-*tgX9SE?T}~jqjW0-bE9h
zShI3X)$?m6QsRbEYu2uqI!jJG%4Jo)nhLq5a{Y?h6;*5GN%i9=71XCvmNBcivaYhc
zuCij5JieCyJ#CEt_tYC;d}XUD<+>`lLZ3Pa9?JLlDf<8T&)gtG@TKw3hd!47&|`aw
zKmLctpB1LQxp(9L{MF9F$6mg6?#FvX`8Pw?e)P8Usd}ZoGWE%(+NRf%j&}Xs;@@S?
z{mxwrQy<;%P=PJqkf+scz&|l0fhW<QljyHA`%N+iw~6_!#l}GY{6zo5gW)9l)xq-z
z!@d3d*O5R%{srH#FB1m!pFH}fcdvdHd30OT-%pE8`{3-{6V}!9ufH|t?e9)pc;qKf
znX0_Htg3#Nytr}=n?v<FSeIP4Vs&NJy1IUCH>Q+SmRGJ=Ux`_@Ypd4OLi=wzZAnel
znq_kNa^IRYm8)j;TUNsU3{X$3sjOeCTbS&tr~ts)Z<tsF<Cp*D=0KKJ)(tW{`B~qJ
zRh1R;1jAe>!k*n#Rdp*skEdo`Eeu+ov!Z78^S+u&9-2Ry?HgRq!LoHVmGX);@>*_I
z`<7M8tEzkzGPtN%#p|n{mEH5F$P>m_0II$Kz+nFREFO6_0r=iQ@TwrsKMT;H#iSMB
z4D#-ov*d|cveWqCUS3#JRSsdvi|c$f;3hF*@^WMS)XAV?_Wa3m?YgyVt7__MWtXd_
zeEI#;?x|X{>V<pdg?dnuYgvMbJ{9t_t9;AkBG1y&c?*i>KT$lp)a5EEdU)!T(vsP8
z7xM<B((ICw$4h3(vP=se_slDrjaypcDp@dZ!Q5Fg&08?%aUPWE$=N0D#}{MRG=g8v
zG46hoXwM|tKPK8MiI&J*l4$XTBLDFHg85StH+T)K|IAk4r?1Zwjah^IFMrsa_$lVi
zU(%+oUhP|33VkiDsa%GjQChydvV7%)i3zQ{S4PaLs*%Uzd-T)=RdsUZnyPinmdmRv
zS63mHL07OG#=}czrOHpbW<g6=)ywii<Bo4@S8S-{?hUy2)z#JTJ)+V=*MfOP=#Uo{
zAy1f8PxwbP>F5X-)4dme>~*uBE|dWSf{3p%_@~@uwETZ3zJS9Y#ptpd*neZjfBKF;
pGUp%uPONWW+j(aqe(9t5Z<6tBrVGl%uRfd8%+}<~gxlZ${{V7n<9`4E
literal 0
HcmV?d00001
diff --git a/Platform/Broadcom/Bcm283x/Binary/fip.bin b/Platform/Broadcom/Bcm283x/Binary/fip.bin
new file mode 100644
index 0000000000000000000000000000000000000000..eff727ca78dc07cbfe56f1b6717e93b91702c16a
GIT binary patch
literal 41714
zcmeI54SZGAmFV|5_vV8nK)!$&QgUv<7H>a9J`=R&B;ix3ViGO2eUlrKC=lc$0g8a;
z2C!0Nr(8^j4t6Ftpp|>;`#r`&$8_3qK|5`Sb_Nr}Ogo+N0=Blrb|8r6qLBAr=iHNo
zpw@O?f6SXnejN5W`|Q2e+H0@9*4q2*y{@Ke!yE6Jo~h!0Rk7DoKUHw+r=Fhk!e2H2
zpg3hmJpWvYQ^HQ?znuKQqRU^M_vBY@SbXfe_o@d=?feIQSC$+4)U$VJj{W?GONB4E
zwD6lQJ^Yr-74{cv=_-=b{YtT`yKj!GyF}aCsnQF(mD0j0-Ol%2*3wHJPE7YGb*v##
zwVF!pR4O?DsXINs?11ENCf}#j0k8zBNy)SF*ONbnE9%M)pLC50pK^^2pLUH4e@<7e
zE4bd|3i1BZ=EI>&E)_6<sjVsLP~-gNo-M&A<yn2lj1^jCj_fxr+#>>-?(dwIsItMc
za}w_*ok+ceasEzC`8$i1>x`+X$^y3v%u7#r^6&kX&%dHnJ+xIuU79!IsycBJ9=zGt
zH%=*kraU_|oayV^9Z|irbfE#b9^fl?!IQdD*_7?PwE4(>DKE4o2(9G(!lkCmb0TGh
zM$H@%*rxpDN0lB(0*=cZQB=lrv0HUabgLql?k|V7821mpV5k5zm)H8Mp7*#_#$lz^
zm+@|nQXL`aos{#;liPtaCt1Z#x!hrSUlY{>&6oQs6?g{IE;OXXX?iTtrYTkE2mUEn
zDt(}bOQ}0?lG#z?{!nI<PpxeS2VzBE>Vc9;S}Z}@2_03Ms<&`Zw}kfvYD8ck_pc#8
zBS_O|*F<HvtBQ6(v(+xr2X%O&wmkb}wWeBp%YDyJ2Db54)nU+9m7rpVpLB$Zf%o8o
zG@dt_9r<o`Qv_OC;QtK?f`3H)DOYm%$fdr@D7YQI`@t=3R&LsrZpLV{)jpdK-?QZC
ze5#6_N7kh;R1kSdGh@}@(h~ih#}ia*Q=(nxe5x6{wE3vjpO-d&CxmQ-MGntbXrW5#
zR&Z_IIwDZLH6?Hpvg%W6`ZVMv2Oc#~Es5>jrUJh5lGvv-#zkM>j9``-+qX{z+Fwus
z9T|O$eCY5Zi!<7%nH>hS`xhN*C`J|qPBZNd&Z6x~tv#RhM6T4|PMxSL%X_|}By?%>
zi~Y1YbjcV#51rCBZAytHZ)$N#?80aDkc{iSr&ZtrV|%jD<We(Q6J>mWca$01s+%3~
zyd{`##_s05)1HyENAga(vcmhIUB>BW<FqT<)l9wMcrzB%=_{pD{krOq@}HrMPF-n>
zL-U2tmiE&<4;qi2ozt-tzWFqJoXsci7r~SObnGl!R1$M5b#}X73%pvX#pd`@0!>Pt
zdrHOzFegEGO?q4Ii)Y;(uFHKh%te~j*VohMc7Ok!-QV<=^i|{D5dq=DI&i&J;|lp`
zvp+!{>U}qU39npQU^;mIO~EU-nh~66#-!hbUn6N-R97>`LEl@YT3|zg3ds9?6Scre
z_@gKIJ2NRme|UrR?@3oqI4b$n&qH7NG&TJsy3WZPN1mb$g0E?miV3U{)TjN~P4M%Z
z$mHATBXp(J_rk}wYRcf{_bnMHp?xCr#f!C=+!s%=Qx81Ul^Ls2+8O$@5*h2)XPSn-
za;ZQTGB0%u`a;H$a;v)xc&cdUdykuxz(erGuha|;9(W8bP)+|29y4aVzT&+KGR6mu
zMF%!|Z0ELUN<jMmk>^W0u7_6!_59E4j0ZF3dq;%~+T}wJNFDTt)wk$MOE*cIb#$Kt
zkGfX-tntsd9*k3TxaPLoj6Si)2DrQ2@E+KX4!N}XyZv(W26B)E4txB#!ZlmX&={q+
zDCKJTTln@eZC;-e*B6XQTfSe2kIV0dULB+}hQg|j!_t)25=D3K`@Qh4)L#x?#}DoY
z<-V#PWGt2XQpJvR&e>Sqdm0;;uiR%M$OASdP@JyLmGt%X%Z4QjZ_MeaS~9U$i7dP^
zAPWMkq<2n-^jC4RT8nQYFfxRHCB5zrkr!#Ri@p<kBJJ|2{1YOBrFmTFS(9feFJ(3I
zJ%%YVd(aq^FZ#9)93r1(;JhDtMDO;cskPD<Z;e;6AG%fLFVSW4ei`jcpnW4Atm}Q%
zmEip~@Sdh^hiO|iZFBSPdSpXqJW;N^hVpk)@6f5#!0y+#biGC!4(j7ten4B-ZJgBm
z3*=C2gn~ZNo2T$mT*v`>jP?|tz@~fs$o@B1%<2^xZ~<5Rn5VH%QSiToJ`^22Sl<ax
zYUD~bW6*q1_+sj|yjuL>T`4l_@W^@RCV#tJ*fYk<LI0q7mo|SdB<&GCS-hm2CkNbd
z8&_@d)uvZye+c?yj0%kdwr#LnX<>Ae<;Q9GaZ7c^m(pTB?1a=a7&lVSM|*AEa5!Yb
zM=2{bz~8g;w@V#$cHT}qo%>ZgowLJE%UVswtLP<lw)Ao6g|AD%Y3Ux?@~Wn?rCkC~
z`rOi?m!O;eXv<V<6~0^BShZFo4J!Q6Tg+X)2`aW47{JV~C-qHLmj1Hsq;11jUFsXR
zhwD3BB408d92{cLFJ!6M1#tNHmc%NBPxP^Y9LTfSP4Q9hjpx(;8DistR)1%CFJPO8
z+T{0yA1;aAG8jJ34*b#~@OQi?`~m(5?f!z1fxo!iw_EI-?^Igg0{8x}mxwIwEL9_|
zv7ZYp-(Sb`%#rZ6#O4A0nT2h!eH`U=c#`GvcV^Q^tp$mJtSwnj+B#4R%h>blSuJld
zF2-y(@r%ZU4aP(eo;0s$?7g5Xd<rvmgwz=WG9Cu}mG6NUo54K5!iB76@!VKCIv_Io
z2>MJ?t4vS@nt2|@^$gc&E|G&DyHu<ABT4jOA{S$zQ^vT9OZ-be*XJms5`a}`@w
z2lRS2awh$~1)hk0#|9h}8OLsP_*ME$csgSN@1|4Ehkx@$@FE*t+KAm&UIo2s+2}wj
z@>WefgL*zKd6tx=T~^uX;Ifm_19y@Sue^<<Qf@x*uY$QhJs|Ur#uPL5ucUWV#?nL3
zsL&hYtClErC<}YINa`bZ*4VWC!58*R8N03D9yETmu=Jha+KYeEjw}lue*xXwZ1`S3
zzM#mn_&n_&L9US>k^cxjj`$+&Wm@2$<9R{G#NLmZv85WiXsp>$;qqrzDRt&o;;)Ji
zRAc)<TQgP1OHLi~ySWz}+ep7DvXTj}q2Y)4&Z0l3!WZ>+-wgV`-^aPM`S0Vl^jrPy
zX>Umk6^LB>OFH&FkraCR$>h*8cd8iruc%n*^~o+(DLj+89KN&oU}3**7WwH97dEyv
zQ3c+Cx4~_C;BXbbs>>Y;Zqow6kE&QS(VrRoEO|+DLct`RYc7{7)V>X0o_adIf<4av
z!J@0lU~UX7;kiOq2B-Ox)Y=d{$^W5RTaxH6S38??ML(GuwvtOFAIY_3+{_Fpv9lX}
zy>{PyFQl7aEiX{P24{R!(B8(SBLk;pTm&C4Z|~UGppqZ!G+uqC=aa~}4}K<*%Dh>|
zj^l@Upy`w@`t&;%|7<xBd!{kpQ(^Igd&P!A&s(kp=Ke`xTj#o&M<j;n*H+y%=9uU{
z8RuodyO+FEdNz64<YkA;-2QTGY3orvi@YrIvcfLlEhbMXbzDU=15&477g&Dli~BzV
zFC3m358AvFnu3ho;<U=1cJzC(`<@;@&n4FVk{%!TC*f&v+UI&q?whT9Ur#itZIAFy
zF0&MykXG7-kGHm(_p)Y@2(Enm75n*?Zs`Y=ervZ%F71*!QdUcgcB<rPr=k27EC-I=
zCx=7Z@h85ZB0qB{+xGVF(<4874SKh$#M`6ruv#V0(t=+o->x+8_ATZUKVfVg2CmS!
z-7n>qKWELKzq6)GOFw|Va+9ZpqiyJ`<Y153zi7G&ox-2BaoT+rd{je>_II||sKDNF
z%nkCz-$efyiGh97R7VuvI=WT(=e)bmvZMCeiO^!Tk$OJp5nc#g1;8+us1BKD7~C(V
ze|4UP7J06X+hTkt%g2cO6}JB4J^k%<qnmVm4wqs1+h+k4I0!y#9LML-KeA+Sz-Gz#
zd;=N$iqMs(8Y0kQ%M-F|>9V8ykAvH}xB2nCP!s-NsoL<IW1||8fttj&J=4<Xbg3m~
zN3nXSr!hM#yj0i2=f}0}kv3Q4Wrf>;zf|A!T(R2JQ<46}9_jx^o~I|P26?yD^mjH=
z=V9nc;T`k0a&*ZG;njoWHR|{tDQc}RapQB6r%L>tKJu=l?|EyCz1^4)dYiV%Sj&TN
z;@_-?53zc82$*MPs4*=UMa~n|OET7E494)sf;X#}jK!xmtB!@pdmjF;QvO}v*^)Q@
zYi;=0#?SXKS9q*I>Bl}d>F0Z73};hjCOnwlls&%nuT{p0f|vJ1fE%2pVn&k62sWY1
zHk%!7E>*85s>+%t%+M1}4|RQ7jcvI=xmx9JsbW10*?uXhzOmPD+<h_XR+;;BRaxy~
zJ~>*g^(fad4|5)omwfnN&AS|UB=;%_oi8?Gmeu!<p>NMka#d}LQpSgEQj=cZ<JZ+e
z8GlV`%o)=^=OSwll~LxuH;^Z7s2*>2oOWI3jk<EfkHTwKKYD{Vo3XD!|0(9k`D)ym
zU&Z<=O=z4zo%uJK9VW0(;<LZDW!)1=D(M>~H>wW$qcZ9?pOgAeHwnxnbliCKQEu36
z`pci0reeE+FS7T{G;FEb+8L#c_;gMBm@~e2SW7~8$rz2|+lWni?eTTHev5t|th-|M
zb3$)7&SmcXL(2wSkIkK%p$<;Q=PAHP&;PjD;~AwYC(`dtA2WN7j8v6}Nt;RCjN>Zi
zUT$}=b58o4i*9I;v^`B#4%X3QwS*RtjT7|ILFStI+SoJLt(V02TDr6H;{H@ssRO@F
z*Uv1FdvL$P{jX9~WonMu;YNOS=&Bzv>B-vWKkKbcQHNfmO)FLMu~*4|(WMUlI>!wC
z1O4Bm63^V0pkCTqaNEV-KH8T1C2UEXo^ocXG4EnBef1+X;#jekcBVO*c0jvN&AZr4
zz6pPtRLYs{YD9~F*Sw1&L%;k;TW-F_+;Z2#i?7aV%Y8+;>wkpYy@nrmO85v3HM`8v
zHriA}`8FNd+hJamG1a(N1!9zO-U}`%W4%wWyjUGC(@U8$+EArZ&(s#$bxVOS>mzT;
zxTAkdm2HcB!0cu|V6U}gS?e-C;yG9#{8DEY0`pr1=+qAjFV&gl$k4$Lt5^nYQ)0W+
z*g!jTv^1VQZhxle$!f-&=nswgq*JC}KH`4v%gix`=7|n-^q8Z+#5a-kI$tJ!8*??=
zerAV-7b}p<i^8+GKD6r&_^=|!+3-R9Sh2%J*n#TVW(PW>({uKru6)*fg0ydGF1%W1
z^eV&VQH|H^fcDNN)`}mXAD4n#>Xc5=TAXtEZu49_^JWh=PyEqV=<(x|8purz@I+VF
zf=k9rUAfsIK6eDaPIxag_$VVZh_BcD=Vr*DzZHFX7#;^%v)!I6bi&_f#|E}C$K1jE
z?w_H5HkX0UwEWs~tw`Y8?SEmv@Z90yZ(I|?=;_u1Ykrf={DyB6$=Z{qR(0anyhBEI
zql*Ft&oW2Uq`&gaT`F(mE+fZm5jc+jgg@1ZKh=ZJ)rrs5^AjnHZ{@+adYgNvTsrpX
zG_d{IW}%P1dJ7zv;EhjJosj&5WPj(=>FOo_r0?%hY38o{$?6>Q{7UsT*0UojAm0uW
z`uYw@`Cn2#%5xMr?pM{~-*Epb{?>Ntqi=Sf=DN)Da`58^9h|6c?ygz1xNEEQlktMs
zftE7(sno>BjE7UZ75Z8Fdmnw)#`hX&-|wxr>5r_pA^BbLp)Xkq(ORZJv!thm<}|bG
z5oq2A&BfT6i3!*h=!Vwch`x5?|A=2z%lxZN>1QUhrjws$_Q03Qgf#QHr+N1XGMAsN
z3iDOMnIp6>AHA@Z_xW3z_sjhY<jqkYY>)fQUh<7~(k^r+&%%#6uW#A)Zguj(=NC8@
zY~6w_d=vaWzMr_kFSNaQxzD0)D|vQVw^f!tv;6+1_#EH@>x*OXuiD>a{`98IN3g-P
z{X+bk5c;^I^m93xrTB-eS#}66sdK*KaOjQE{!GTRSLz?4{upc~_0M`D^NaSTh+m_x
zU@fAO``9UDMtm#r$xT&!0vm8sa*nwv`#@{%A;!`<=(5*|kL-7FUv2`&r)@kAjtj`u
zP#g*z?dXFe77lw}KNNmX9R3@hKC=IEll{GmZwUuIeCN`+N>}Dp6eJ(bEy+`vrCX9K
zN=aR5d{a`_O?9OybdTy_9@U|z`!j2lo+5cQjCo02lFD~5<_|7-WaX#xZHRo~mx`ya
zF@9w2ZytP#WTXFNEYY4QW9Bk89UMD7(dhvVU)s9&&EPvv{65Nkx{9^aH=0|;c1e2}
zlZ@B3Cy|GOZ2HMPKC{ZNtrZ=(7h2FW9YgaC@`NT&w#{>mdeutJRLZpSp*7Q@nfGGX
z<h=*D#c{Y!TbL1A@ADr`?w0ukaL+P?&}sN6dvm(Q&X*cF-7a*!i?r=#m-S87&AjGm
z+K`|Hd$y~D@FTqs?dnrz&r|8!_qgNVX9d5TGF6NPkssHx+Cq`(>#_S!pRFovQVI12
zZS<*x+XwTPexQ!avLBO{)fBpyO)RXTp4eC^m#DO3uR`l9j3Lo+Z;<ao2VKu~(lrtO
zYb~^|Q!&<ym9oa!-etbRrOS*$`#Xj^EO0Ju{ySN}>|clbI%^Z+H^1R>dGE<n6|5zD
zUCA%*@%i0PGM_%T3|#2a3|;i{=d_H-vg->E;Rnk6OLPVH<`8y#Z5DE}Qs`oxBbl<S
zSKXek#?*g_w(`xz+n9(yjUOQP6~F4PwnY2;V(^7qUs93jEh^Yl)Qf$Qe)H*LQpE<@
zYq|FKmP?yE`qv}Gh6~N&_lv(j4gc%rO4IV|@sp3|+?W#(-+vtMK7%azS&N9~s_FTy
zYAv_}o?KNqmUkMLyvvVhYyJ3i$>_)Yo!VL->lr_!E%_0A@9R{h)RFSvrd|0@@m|Uu
z(AGBR*lY3f{&&!w|1xkgROJq-`(tgb!Vmj9sT0-K2JtuZf2FNGIo5_(0=$#dDQ3R3
zi1J5}l_&VlU0p0|MOj|)-+cut<C{mPp;y&fe8ft5cOL)x=Ccp&+JxR2Ng1oojqg*3
zcLR0&9isETt$M$8(Up4)p}H%G-?|6BpQexS{k^hIBL4fPIBXv{-;C44H#du(SLkn{
zN8SnS@o{>Pflis9($@jgmDQq<cOPp&TY)eA{xz4DdLBHh2f@A=hrKBdyUKMn>{{9?
zu(zXc9QZyx$ATXO{!`4ou-mOqF((pVRq&ihQFl3Ql5ZmHQ7Av}%JrJ)t*^OM>K)K9
zl=spefiJwTj?=?fx~i?dLA>|D-}kH&=e_WUI`CfeIy4DAo@+pZgI{QozJ3RPQTQQq
z@DuuV<3*PJj0wj4T{`-pYLZ&JkTE=t^|TrAR^ES%6xnN)`Qi=SM_qYdOFy80opCGQ
zN(bg`KZvg>4*u@JnlAA3z%TOc+uL@pvxa8tMK%04%z<GJ40GVWF$eseKYpigw_Mkv
zkp?#PS#ZmBE%2M*e;nL$T?_m^@UH~7T-O4>AN-5JE!VZc9|Zr$z%AFcz#jpB8o1@U
z7Wkv!fBo&g-Ev(E{EGcxKL)p4*8;x*{%650*R{aUciGOz!7bOd!0!Y9N^r|{E%5un
zzX;rNT?_m{@P7>4a$O7j5%8yhTdr$?KMMZWFEakQt_A)LQ$I0fazow9y6VQd8)nPX
z$EVIJ{P_Jf(+X!4&6qLEp{aEJ@|Ek1*~U#XXHT0sd-{xz8F#GSU`(CDzncmvv}Vpn
zouXHyFP7T*$A`TCaXkO|vMcLF<N0~<{O`=Q-#@?R%5sb6+0X0Z>9g_l$MJOWeEWTJ
zJdMWl9pYBTpO-lK=^wLSIe5%CzM=VkhYn_&)*ma4{0%+7@#p(D|II(`E&kLamtOn3
zr*-3}scVit>AiQO*;bcw&(_ARI}(nc{9?t=v*v&4ql;5+-*ju?;umbVg=_6}(d~9>
z#`71%^IyNs!Ed3x>OZG^q|q+tly~ws4uRw39~e^pD!{`Te-aKj{9pDS{jy|8{)ywi
zd*+?rbl<*v>t9aqnf|R;hn@$@E?qQrwsC!9ib}EW=2b6WxxS&!SiZ_wBgq5R_tzOK
zS69~>%c@t^u3WzAeq-|W%WoK5ysp+*x7sda7av-{fw#JG-TMHXTV8%=`E0{5)E#$L
zE-ahNt@?CH`5g=Im_OT43-6eBr@S=OJ#))T@2udp#ov3^*>YPOPglj$jq!AAJXOjr
z-=C)2-NU-C^Jm6ySU$7<oK%yitIIj#*-5QpN<Q|+|4ciLC(219R(7uSzxAIvaQpl3
zQXY7qdQDYzZEaOU-Tli~ud1q9R##I$`3B=YI<Btv6GmM_!|Dd(dcNhS+_8F{QMYRK
z`ump|57a%dy5T|TC#oBE)!8Y=JtecJY`lKuM#ETa-^p#`@=bM;y@~tkb?X}Beq#y;
zMDAEvMuxGt481;OqvGH2-!KP;IWWwDVGay)V3-5L92n-ne|HYBf6MyQ^c=-LNB%xx
z{cr!rjxIKav!8)KJO3w61-rl>{XhF{|5JZXeWBa&*arg?x<^<U|Bncc1LxdF-(Wm{
z=zTw}@pS~*a4LTeTqoTTpZE9AQ;ys7BD;^6^&GwO*@iOkzdd^yfa|=`tc@#dJ{<`7
zpcC+6g0;EGH<ClaR=@`iNmv0N?EJ;#tNCnxXQQObn83T89GD397+DjnAQ6g1Y?FM$
z+B|C=-rDJ5BPQ1|bCh+k@Hm?lB|yY+Po&Vwf0TTmwdu(U5OLPyv&%P=f7n#rH-b|(
zxDE~yaWfzMtGI6Bz)K{ir&nLnrwESg1ji+Jdi#omba@`bb9AK24i*ly?S}Vg+jSqX
zZ9-EDWewW88~95(y!``klyZp2WFrk}fKB=>6WJ)*q*T3cia(bPd}m~XK{cBfWJ7@*
zOz^X5#kBaO2N2C{>)z)IXl(dmhI&q=+lN{PA4rx>zp~-Cl6tMW9(Z|#YHj2Y)!jTF
zTIvc+V?&&e%^msa_5tZ?HVg{y^i+Rm&S?AK8Jifb!_)S=G1j{b-ZgR{{wy0PEIQV3
zu#AIdkJG+y&{k_B1)J_KZFUYf9}YFkCOi68HZvOp_DGs!9RfIzIK@sA3hmTA*-l;4
z?Nt95n}hwgzZ6Lbc6LC&bMSLfiX2q>ZU}km-w@`fkJ(%}L-JnWKA+7Q$gTH(v*}4T
zc}YM83A7-aUZl)lQ6|a;_8_zdq2I}8qjRfl-j<DDZF*LH37a`}J;(;YpvZ6M9NtSC
zo%R*bp3<mBzxX?Amo0t%MK<=d(U&#p$TWSZZedd+@Q?v(lOMRI>uIbJY;ji<u%T2A
zm`Oj&W?b1ID)(|ZfkbA)S9vGFRs0-ESEruokqt1K`HhCH9K6(d*4SWZvYAj@mz$|L
zWTkj#DCITDcQ&0m@MHtA1{{rgk{1ly<)v>5fI%Jj!(k!HId#UsE4AgJE~OSQ4(-j5
z4oz*)%vkO}6tBZ4V8noNKpDF9w`>}>Hf3_pm{wM>k&|uab0_nIJ*SXU^u}Y{cb?3T
z^i;9o_aySJ-?E@fV?$^a{aBD(wrK%*9jR>Qi}SIsj7`nSk$Xw|gO>;_X@{a6va!4U
z-`dLCwQo1DiMYO*jcO(vE7_E49dPonIsXP^!(<blY^2Vg!vPlZPCn6`n@WF`6%a(=
z^3&9H)obJ*kugZX6AmX>8-I>K$H}bbTsb@_aw&Z_lqTyrE%LJg8V5GzJDUMzLzC!L
z3AXW1z@`n}2nQ#(ap;lFieA|a-rPB@#aQ6$eVzM=E}QsW-d}KUm<F5W&Dbxw4_f)U
z*V)MA$fxvSKVQ<#j(?_X6danN(5+gFPTv^rl3q?H?)I^n7oC(LGReV~_iUHIJnirr
znARrxuc@^k2G+0P=`VoqV-vIR`g)a+%7*NEHi3HO{b~Ba$0lEC*Bs^Mox7gHXx@pE
z&*4~Um+-)6*t|w&QjvjrIWWSe-F}+-4}QlFu=}YeaNy4jABRo5c+NM~S~kjhrC&!t
zm+!-7$4}z$<-mY!W|L>B7eyEJAp;Tm*&v_I;=6rg*?f#FR8wF2dGJOr;Q{Tm<&F0I
zE#;++LFkr4ZGPx}Dq^(wkQ3e2JFAp~e!s+q$^j|KYg5{ph%xu#MChvF-Tg{G_NYo~
zIjoY-?0^?Rc(E5aPt(VJY-l&B^FwIk5aF?ia<y!w{I|po!Ba>6uGIf74x6i34V$bl
z(3i5=T4b&hn9|;$99U<=c%we%_Qq9t6>^};r>oRQg!UBG;U8soY>np$Z~ddt3GiUx
z0K22#?Zbz12+6WJY;b*(cFF-H@P_}wh9QS_!~ctW(a9WQ>8R&k<ZvSNiwtHTpH6U#
ztnlacY&Hgu3roKQ>5~(qB0oFCwPD5dUJjzY$3gLdaV0b;WRgRJR{QS)4u?%RG?o=^
z<X#~kazC4UHUQVJfY<m7)_Z9idc52NEd`|2y2jxuTi1se6Y$#JC^*Qz8KUQc?zj#b
zIJl_X94^h9BZo`RiSDq<McsjClT_=GG;B|*_yy`XhsxnAn>X1|DE+gK_hN@<VP_=Y
z#(#9beMs|rArJVt`VYiU<GGQ8_tK`XSaq|IG0Fs0Ai(oX;Qkc-%~!crQ}i!E7Dx{&
zRea)Qc<|TI;>dMJlFBZjOaXL?jF`z<i|ZC_0%-}CLe4$tKp!>&o$VE!CkI5?#99e&
zI_25YE!ZWsMSD_Ud4Ods^YzNRlH<2_8%yl_E61<q{ZR_Cyri+$p+(B~m$76^_sT)g
z!<5TjGOgF)i(PIYfRD|OOlx!a4ES)UAS-Z)1IKcB^6<mz91($HU*s_2J<xVy>lFAl
zHVkhLymd!nKu^cE(Z`1_&+WR7{yz(E4(ml{MzA5eFn@Dbwkzu!Q4XH?6U`#6zOk?v
zy>v1O`Q2HvNe-kio{Gd@`ym^#<q(t~zk+cTQ<^$-9ePA5EBL|mX8f=yGJXU7lTN<W
z(}72Rky5!8rP(Ue!&PeAVz1~w8T%#Z3DM6Sl&JXW3QwVIPA+0IYf-+cIKjOfwlZjo
zdOb0a3G9zR|2*W(u?g1ZRu0%Z!GKOBX;V4eQg6x_D3*JzUO~I24wTD%HM+^5U-5f-
z?1OFxI%)HnGRiA_SH`XN{A*~7_I<e%)IIW^v9k*q<FKKB*HP@h_&<vK2={XE!tS%f
zA@xq1by)aD<Zvtp?(?zr9MH}k&}ZKZ<xd{pAU54TP@EX92JSN)uBUAFuaHqA+E%Xo
z2O9DTG$!p($tpwc(Pfot(7O_zO@b;(J0jj4osmELPEUk`9+5+jbgGSqdm<bF@ujtO
zs!RKOA{_ScrS9qsX6)^eL!QEeSCk4l?Ep6I7&tsH?XlZ5poc_O?L+h`Jd-i5&GUB>
z-6r!M`a@;h+PxJWcrw_WNq@12c`SXrrDtm*<<!`z;N!smn5k9j;T|L1pPRKY5BoFL
zdmVfNw^!<xagcc%`muxq>=Ix{Xe+_5Eaq?u<Bsu|GZlH_AW2D==d1TyWnHSd)0O-6
z9x3ZeYVO>Z6YSy8Zn%9ffjBrM(*AW7+W<^0&EMJH!(qp*5-d*l`jOY>rSt*1aPQWP
zkR0&WImG4!F-l7t6o|#L$JjaA>`^K+5t{L>`vVPNCkY^O#fIvzqO789FS=@Q*=Glr
zwe5@dKPaOj?tlk9(1kBO4WVl+$R+@nI?!609T4Bm%G2X{ylc|4&n!hYs=r|NDodV=
zPsrgC$=?gFhUQ<XTkM1J5}@L6iRwn~0y3`~ETfiu#_9V3<p>P7R^tGh=4bw*nKM<8
z13D@xQzbT+2XnsOK%aY6dR})nI);yc1j;My&QIIeBhL{TbCYlDQvT{L<zDif%E;@E
zHhqD)a$dI&+SSRtZfS!rn#W;9Ik1@5-A>w0syyU<?dERJEw^`hq&$~#DzEzu?1&un
ziZI3`y<nwTUThjRc)-Sd-{SXxJr`RoKEzLx?LZ|a^ogwuo>oP{*Hn?f`Y7{iQ*@4d
zek_8XvxA0Ydu7grFt<`RFp4tBzFkhuk7*oGl6(Vwm_++!9?LxIpwl;U*dubOZ@O)l
zv%OQO`vi8|#C|BBtQGh>$J77v>;aFKqdMfU)8O|v%6p+p@DWf7y>ZaN`DNyk((VCY
z=Ee9%|ADqMfDW|kvn)IECU#l;896lE$)>;7PNSuDsvIH_zal%l9-C1ahdGYap|K~P
zmnnJ7GlB$D6nps<%A42}hi^e>)09o4*dyVK(04a&b5VB;?UQF#r}|<4YaI65^o_ul
zLrVrSF6G`N}>-p6_NkJRbs2|RajiGKtQ1fP>Yb6MVz$OTF%TkcO&-{G-5zcL8k
zw=Ej7!yh7*z&#Qy#<4X{pozggX%_a&!7sW|c>EQ3taGpp-!gnCGppqgd^KtRb-;X#
zKqaDUE`d{0;e}NnS%cn#8bNNPUmdx@-tRobxSvUSg7mOH)*9dKL&m*~7wOx^-)-rN
zG7pV14>go}%)eq<uK~{o+VH~uWNS<e1j&*4ntkw$;HUT$1VHu5p)HJDcr<j1--Nt~
zKk2PS{?(Df?is+05<oB>xWaoLU+iz)YP!gdL-TBCzSor<z_zybQva}?`>wQ$jA!LB
z-<Pql#vThxhVq5+C47mxa=ao-4$mEa30_;qt_%Ma`bx_E4!lmeF*2sorBCc~1S+)J
za|dN+u*PyX{q`2RH>eMcEvM}B@Suq`0jCc0y4H3A{RltmXtz~|ARs~V968@bzEge%
z<sJSzhj9ji``C8Fq0<gPqlGo#Irv+^Uuo$#bZm5dcLlWi66ePl8wZ&e#G)2ovcvc+
z$dvL{^Ug!Q#V2@LLffa&7mc?4*x5?TIz-3&*$R;v33m3-<-T!8+YaM9=_}f?EBJ2*
zO3^>1tZPXyJIYyWKqcgR$oEVUy!lu7xuQ28!gmwh+e8pEKVur)_4H?@tV!92BD1`g
zC}WL#{7qBVnW(2TW*zx;g0=|_B`Pss^4?U5MFs&@jbyGgRTObu>0=8{<U4H1mftKg
zlq$Mc@NC)AWz#&1K2t5wa@=F!|1rlGeEGyuONP!;%E@|W*%Y&=<~E~HiLXi-Iou|G
z@ebP16wjA6hQW5W3_5GntUxWWw*%XE+-Q+CHAVe8;1silaGLt&#);1hJ$~q@!3UN1
z0{@D(*lPmbk3zfju|vBjUA1^9KaHRw9$+j5S1Gt;9i(`QDzeKZ28ua+Dm=(X?^>x}
z6-g>{6Vau@+h)z*xhYxvo`D0N*l&EI`25$>4a(9DpP_9<uEc;G{7i%<89(jlA6e&+
z_P)(LdA3V$@uYJ>-&g79^VrrtJ*R#f{=f^&iT!Ur+$A*c%SsF_b(=+{^+ur|+Vh}Y
zTh{)(jNz?G_*@I7x5!~Pk4tO0j}4*{G-qGdypWH6uNEIDMP>Bq1PA8cgbsyl99>ae
zn6sd;MZf*#!dIAAxR9gfRI}sX;p-6&)k)j6I1iLx*4+J_hoFBpV~wb4mV5+t)#C6|
z?1l7;;BkRR`s;<;stdu_;-N2H@Y?COp<~?+m|`Ei!!IZj-!@9WV;_r5;1)9%YUWvS
zFMV#rQz?5yeAjq6%1j?x#tEEa+j47tl=jcEf(K3qj&|JBBK^0XJ~^bTzy{J21u8I&
zwzTQv>L=5d#)r3b!QYH70^9j!n?=D<s^vr2DFU%|5a{7ugLyc3_qsF-m-r3hSIK(H
zI&idtOV*z)yx^;PJpcJyu)!6`DP#VwAobLOX)TK2&cRI8q6!I82HsDAw;!jqCgJ!o
zw$J*E^gnYdc$BFQ44zjF%$K1hY|FuXD|o2{_7=OQvGy)=<ruPgl6mYn<}4B*t5@H+
zYn=GB>9=&tfm5-|qB~Vz-*m+~*+lZB|8;f$t}4DwY(Q43bybvI`<brlM0C#Bwmn*^
zzucEdAfBZvu%0y?@*mWgPl)||aFmLT(-zM>bSY_8zDu3+Y{YglCsfD{ddoWk_>yn3
z1|HG<1Tq+3q0RP}AJR3inw0HD4q0DP%qIry_|SRpV4tJ_`8`~r9u(ata_;C<WU11?
z4yb5Spcp<^LR%waSIT7NF?VBpHWBElajdLMW_g#>U+w#pW#_(uO?6;Np7?y&CvP<{
z2`af;^z^4JyPM_hA{AHyV*@a3ooKJEl`uX%_&UwlEDtu0=YwJ|Xq#n6ME)ZLFu%0<
zZ~G6KOMi-NS@Tc&P6BzFto5CupTz$VA6VA&B8(N=SI-KU#%U5cvBsk%OFxSH!~+5K
z4iX5jU%%lGiyXI&%H1dd9tAc&{BD&X>uUt2DP7z(9z4=^@h^`!{7fGaID<dWJiRp^
ze#(3{0(~Nb8a7dA;5$U@DBq`ou9Bis_-&$lJmiU-319PhmU%-K^$2vw0dVV^pEo#B
z3w(vPNZ*TWN>C^XvMl*!&=S1dH@#oqSOIwK;Cz=h+X1<pHB8~%c-rEFM-|W`YX&ke
z6+A)ua|*De?LP1ax2ZrHWhH%u)DI3>)3m=exx7+-4Kzvr+I?#WgQA_~PruVQu9<nw
z;Q8>kWAKb1<^sRk;+a1)8T^{)S!_=;<LT$z3%qymb3|STubBz|L@xSeJib0IbgUE}
zpclm!pLDg|>)AMAs<cf4-|QVH!945$jq<Go_~GBt9>#K}l6F!C`LpD)0DoQhVbUMs
z?+Sj=Wdq+FY(FhnqXKt=)A2=|c1r$2@`aA}(bBK}T~fx_X$RDE%Gv#)vF@kB$Dl>#
z)oN$eCQrZZnlE&C^;>NJ&*tyZ{f@8YJPSXBPLVNJ`W@(o1C|{@_9~mz*_r0J$IGL7
zu%U*vn1Xdnx{#mDD!z*fABywV@V$*-A6xP(bo6mC>ro=hCB_lH)w)(hv)b+z_|&oN
zk@L+gDOJss0LK#CnDwx7z7=>&jYzK0kZ951M?WU6h>lQ|r}*}B+LeF~aEHqh&dzfC
z|4;co<xXu{%vvJBv?ig4w)>I;+ZNOm;xD9c+cB}lhaOlB4`*0%u6s|y|LX_ci{B%<
zcxd{U)R{aeU+PJj0`e~56Q|&RACkV2XTEEFl3+$onLP63UQ)OJ`Amz(MQZJS)(qWz
zm){<_n#QyAn*_y@prA6RoCEA+(j}xaMg_+v?B+I}MK6AcR54E!JumO3TY&|S?C;?j
zIq5W5i<ENk8=0}cyE#0+2fZR~5x-yF5v&Xt1NuwkNc2~Q`1hrW0kLxuY(wU6MWo`N
z{TBQudi!>NmNJ`NvjV@Qjs%^%h#h{7^!t%nEjiF3{VhQ}@?A-1f~+S$wQOUd=(!zy
z_c^R5*YmBv@>>&B=4oVxaeTmouNIlGrRxUj82CYZC#Z@M(^b*Jye(ZGO=~GA6#tX;
zAcEOw_(vYv_@jr-C!Wqv4DHVvb;H-6NeUUi#s6zj9n~(?g73xhihoyiz0oUcgE7`b
zk#S4bL{Ajpy9&I$U#1*^ax_B~iO>2IbVjI*^(fXO_kLNvJ&g5wKBYZ*J-)*JtUGSl
z*J5@&oj))1^<p!22tSAKFa)M>r{*N70CRy1nd9?qY}{M=b*bCXB{701$TySc$y-l5
z58=N^&=Hx(h>qG@ql>>-o{SC*K52FkgrnZa_|fnQzq!KmyreR(Y3Eyu%y(q&T)=u@
zDfYeqx=#`WtcbSBoc$DY^;68%nPWT_pOftL;J-<KuGb3#1q3g9k@Xqmr2G=8pLI*w
z3-Vd|Q~VT-_J4`?o0Ru#l{xOHj%wzx1<aS1Vq5o;r;`W%*ioKE&ut~u8Ly@4LsPAH
z%oSNnJXnA|E+7?svQ*{U@0ia?`BJr`e5umCR(WGEj2ye%q``UP>^yYX0In=MZ%&+!
z1%uy>wBMP7^U|z5&mz`o!LLD+M~#{)?Gqg+vMOt}&V1VTu^roI`-;D%e}pfxj^_u4
zV$F=_g9;r#276<@!#*q8BYDo4du3=n-aGY@2G^s_cD;c$@@#af_$p%S#P9quus}H7
z!X;}wtS63U93Vftx@7%N=z|6gew?(|3mHqrCp6v@h-)UnJ+g&92mfpFzLq*-C&UMG
z!6Wg-d{PfRBkN8B>wwNT%>f$4FBJLm$yx{f5&WjTZs}9KGvVtl(NoqtXcD+W5A*R^
zL4r?;?~U)e$F@T@Yz@DLV3x=5jnC}Et~h)w1&6g(K);&65cnqWb!ij&#?f_>7jX@m
zx5w@K8hljumZmNlYdTl;ib)&cOZjQ}_RCnR*;KQ!=9ZE!Y*xL;*p@5y&BMBZN9JRc
zD=5sb&<xGHlzRD;QP{>>;4NKIyRlApx0K$ZD)#mz@f};MK<=m48oIYw5wwx9T*Z3N
zQ_6gBJMal0RgZsJ$=p1nN%j^oeh+`rWzC(3`T<Vx`4VV9e5<Qlba&GxW25XXX#?h9
zzeXkSJ@s*)^*uE@t}WN*fi1fPU$W-8A_soxDK4P?ELS(rozlM!?}XQ^<y6Rez3ios
zxiLOm<w<1DlW|LTv~PE3wC`|_!CIhluY1mr_46#|1ai;5H3yFMZTADvg5OkG!n`S3
z)iwZ^ptQ2@?cHb-x_&*VE$?1`<9pVZz&8TpU*a$#;5TL7rtCVhhv+0aP|KXqeTp`h
zN}FG?X=BVhCf^ve%)I_~+B_bxpZx)~nGgTIfZ93u5@K)tx*bsa1$2R|OUSy<9}`gf
zC}Y_kN4DM~$kzu8njJ~GB4{?_r~I&6{DOgR^`d{o=NB8JWPc$)`fwB;+Vcw5-6d~&
zTHw3nbz+OoA+J*ZU4w6z-tex$w|lAQV?J@zw$tLj_kR=fK+|7YG}+%D#7B|66X*&2
z$KM}(`#yL*H25|?$5p|%KS$os;M<=j&uU*ZEg*G-$BwO#HGF7B|Fo6+Cj}dvF=v(c
zjkfk6Y=kF1=y%43&>Ljj4F~2H9c}mLy9MSp#Fm-rT?2DF@7^siw?}LdI!@-*&7=ju
zFqgywb929xzF;4-9hjSEzCl>BUMGEoZg2u~J2=EH4i3z13SGX!s{(UBboH1C%b0n;
zz}%*5I54-uCJhJX9uCYs9GLr$56ry<dpkHVxA?ljf)5y&`_<9EKQK3C`t4pkF!#~n
zz}z1!F!#=MD=_y4=58&lzYx*2)xg%soXYn;fw{GG_HGb}R!g_fi->Pw^b~cg-UoLX
zJ=a<L-DMsi`R54Y%X)8XQ0BI0i>SADmq$JHoObrQZbN5ZA^yg1@KdB5Yf7ztDF-Z%
zTK1d<EGbh>nUn8Yrt*q1|3;bfz+r)>m5oy2s4LSBz)kuqd>wiI4^oR(wdpyBRv$Qe
zsP_-@4qPw8hs%^bhQBNMFUIr#k^Bt!BxU|7UIt%t+#eczd;vd{;RGMwz`YZEoIb!`
z+s{5m*~7=W59>t2!wZ6Ivx-e9zqR|{o9^v;Wt%$Z!+&_?33X0mo?zvx1v7hTx6r0h
z?yo1RbeZ2?-fW%s*e&(X@?JUb3skzyPvz3Me(@+jZ~*WB4P3f;YxhL1Q(w*qxtW6`
z0Podt>Fh<%XFW{?_@T0{U$mGp*-Ld;$$r)e;ql1OVfI*^Y`H6>nG?DTxK3v+4!M{w
zxyv~>^eB7ML{3;EeRZ53`enW=^sA4!L%+E(A@usJ#L(}GlR{_bCx?3O96=E4l+c@1
zsiEHc(?S<lj|{!@`B9<FlEUtuCKdYyG_bB0NN25g^p>iw^xV<m-*vds|7rP}!vD|;
zXSG~X>AzV%zGC&l6}>;+VbhpSTW;dYq%Fr^%m{V*RcyX)ezQ&En~zp};w9P-Uv@Ev
zjUD4&cxFGhosc#K>3<1E{{_+lYp$;c-Y*!vl-*2O7yLGlPv|xYP%q!eWM6GFw6g!U
zMfz1_bvxz8QBHT8vCGUWO6dbr<)4uE1@smB5zdtQ{d=tax5=#iasI=Trt{sny4RrG
zJie(!$Y*>V61=SCwnoyl-pj5OYp>><H&y!6Zz*ufk7gBiyDqnNx}t}BN|h_6jlJm+
z<fz$Q*2`YP6wWWz%h@G=M7<>VHOd>GTij)&ncsBiVZ8yGv@_<;ZPpLy2#x)DMt@%U
zVb%a-Z9#jdYR3_NKvdtN?Pw<zIQj3i?T}RF^b#2T@8Q9IF6MGFXM(rdG5R79pe?>c
z^QDtD#<4K>=PQovcjhWmSJoZ&P;YP@_|U4*Pf9)foQmrwr;g~PCTQ{?<0B@Up%G?I
zx0h?QSrQseFzqQ^8Iwvwcae@zx!oxrD+{HR<aMW(=X9q{pA$+ma=JgxHR_hRp-}|w
z9=$K8JAKZ)&|>le$Eh=UerVzG@!c!9Miwpzja)}rpTJ)j8hsb=xiTi*7P?8wMsm7S
zmYA`WuZ{0cow6wO(XzbmMO-5bKNT8Dx{7PGc}HmUl)UaKi}Ng98cpJdgGOti|IGLi
zzDJWx;FJKTlyO+bIGn>coXa?z$2gqNI9$LuT*x@Qjd6H8<8Tq<@Kd38n#@>UNly1W
zpT8p{a0oz+UXiu4HuOAuD;X>2T2!oO8#?C)cZD(;`|0R`o478ZCkOwqLWFM$m&p5|
zKdf+&@(F`}SRur7l(Dk?=W5N+A69slck;su&oGwTS?B%#;fEDoAh`ZNx>Wi<j!`X9
z*NE_B>~LwqZ7tfQqkGs_vWvYG=lC8`nSxx(T9BrSx>@_)RmxelNmI(Y9!Zbf`$gmX
zx#^zo=PuMnct5;yWJQMOXs%_4wfqyejZgvkA(v&W>E#1M@&%6c;}49ZxgXV%ytnhC
z53i|=dd{v?-k_zQDJA6`(768h4`2OWejuU${idtmpW^)u&{~F`Sdpw=Vys)w+v3k+
zKmRBHpu}Gwqsi<&OXBMPaf#XJ^VuqfU6${w{XZ_j^I0RR6-l4ztmA#4ADRGG{|`+>
zOa3%JGyx8Ll!HQ_XAllq18x8B@<S7mnFBvGVa^)(p@|6hgMMh@%gFP8jUSpAHSj|d
ztO;of-(l~B_zz7?i2u;UgzkYKnz;3SerRIA&lg)?rT+9k8sXsa<DY2pAEuD?XOaE?
z5kDxAl{x%_5`2UE68&F2{DTtK{t}I|t;0VkAwT+O|8R)x=P&s$@PiTs_?z;*c=!h;
z)bQUh2ZlNDUx)+eF3Q>WYxnokHOBup*BJj}*XV}^oE~3$joW|MHO7C_HO8NEjr+fE
zj;s5MZwGg(bJ4QC%2%q?xd^GO-~BrFr_&J*{+A@+J!|kDuIQr~p;LT6V2_b?9-IAi
zfzP~!50xfoLsaFx|3O*S6WEg*jy9Rk>8#tA@XbN?^qgk>Kd2X<c=ZGJtAqb<eh>bl
zLHK8X0Q@ih0r=bhg#2~J`Fo{K`}@BgN&ioa_dluh|MEW}eGY!~!29<9Pv0Eq|DXNt
z_xFG8AHaW+fAqln;_n!Q|Jxq`|C~PnzvoZL-}mZwC;yN9!H2@3Klq^3jW)=|PQb``
zdN!Uq`9AxZwLrF^YN|l-g_6Hom!01mPi<gV|G(xv-XD+WzZg&R-lN>r5I<N>B8zzP
z_qwv_OqsjrCZlovnl-B%)-@U>B@H#pW={Y3>QyTr{DiUC`uPl_v2LBQl;6pyHSSwk
zeZNswxuk009c7E|o-?<qq@=uT!L+GW<#Xp(7@stz5cIBe(X^Z5k^1LaG2WN2TE1?1
z^~&X&Bq)Ew`c><eKTrqEh7HSW>g<UA3s-I6eeG2*YwH?o8kVnFCxPPEq^RnK2db)}
zuc~oFjcQz1Yo#f7ud3U)rmkik;r*-cyHAik$gcw2x7ui2SG}%I-J+|65ve0@${sVe
zxOj9%adGj7a)@U^I1}BSI5v5#{H3JvU&h$cDGnj)svGX7(Q8(JzOKPoS+}8XrEwob
zG_G%4Q@5(tSiPpMp?V!r?Nihr_iF&4|9rX4|K@nw5>LMpPut=t?X!N-facBJxUQ~Y
zRrN}vWGS6Rbo`pS<r~Ofy^1jR5*@#KoiTUOG!G&5jk=9Bb!&t~id8qRUiHcA*Bgxw
zuBvTV{XpF(rSwWd<=cP8m8mTr9DVEmGvjx~LsCoLuP$e0Q}oKz;<*jLjKldrNlL?-
z<<n*x3s=$hhV^S`_UiT0*Zf2PZT$po{jc^*19rPl-(~l&)5w2GwV&N?`~BJY`^q#s
ze`7qIa(r}&)Hyr#%K8qR$<yq7GoCv6U;VJ1U;7a|ofJ=<_rvKh2ZlK?%z<GJ40B+Z
z1H&8`=D;uq{yT9%V?(HT)@*RK{+u5ia8iHR_KW-HD+lans@Z?f4taL+<EibnzsnB~
F{9hQUX+r=2
literal 0
HcmV?d00001
diff --git a/Platform/Broadcom/Bcm283x/DeviceTree/License.txt b/Platform/Broadcom/Bcm283x/DeviceTree/License.txt
new file mode 100644
index 000000000000..1603937dad82
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/DeviceTree/License.txt
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dtb b/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dtb
new file mode 100644
index 0000000000000000000000000000000000000000..d1b37bd1375de4fe4b5f26fe611e40a5a09d9327
GIT binary patch
literal 25617
zcmd5^eT-#ERlm2V=c5-#7Fb|GSbDZ+nOS!3_It0pXL>;7x`MlWEDRt5qxk0advChm
z&imrs*I)ZbJ8=#C0VJ3ZWC<iICL%Egf+$4)a5P|o5ke3QCThT}0*NMS5Htqy_d8Xm
zZrzXfUeB@+E4lYpojP^uoKvSx)va4~zjX3{|1}6&PYZ(JfgrfNi04^cOy7zNVd39{
z;H_UXalP9tO`2zDlSl9*jbPMBh8ykCXn)u_w-WURt#&ush=$$mB-j`=d*?Qqz1sT9
z1){Rd?YN%u1}(FAsk6AU_#g`{-gl4U%p*eHSQpDMeP=FRwdt_Y?KF~hf~4R+6VI0}
zCxhm4(jIjh-S|SgR$Z&CR)~N=dc=7}4yRJBRD7JL0Ovu$X>7MT1EfsZ+wgp&h400c
zJwx6UC2f{_v!OlM?zfOK<&NU{Ho^sBU{6Q9A-Jtx1B_NG7aS9$wS=oJ`JMh4D&8KB
zqvoJL9u2zP_DBkB)GXJ;e>Sd%1b??NZf>;(o4}!59uDhF1ZUJY*{hl@x_K7zAC~-H
zqto3O?3rrT*R66`&oglSn&4~>I|Cqq2_?dO>i3<JpSD3>zvSaRrk-9?NRSAC2&BRM
z_sz(ERPsBuM9Qxe%757KFziTvR!-9Yh%ImGU(1xI3?DV+C)yEd{JviY49(XQ^FNu(
zZ{}qDwB+|h2b3VMgFl&(e?#&+HOjCKGtZa*TqZv&Bl-JF$=^;kQ2ye2w*F(t|Kf7D
z-ICsA+T{dbe=TLMZXhacMVtQ{f$cQ6I&UY~+0x$$e7w~j^=xO%w)08gJ}x+oz0R;b
zx+<kj`3UiUkvyNjWhAO`RUUO4X|sZuK7nBlSJ>PdB<;SWX-~J}`tEvdt#WUFRNrol
z#>q<sU2rXX(Zhqj@gyui+>R`qL`Z{v=m$(7*mMXxIr1$py@WVvG9S7MSAOt=@Bedf
z?3Gt63^c+Raq(Zx!JymeZ$`bw(5hI<vb^wR-34h;$3fER4ZH1V1HP4k@M*r0`S7>l
z0|$t_3>O`0Y%lBjiSrZ4dEE^}7>I{pX@@c5HC$oQMG4N+kmo!4wFroWA&>@jaQPq@
zBKlN?T?gz}kRUs37d}acPue7(^f7$W-}1@+$S3_1pY(Nnay;SlIrjNn`~0aH&*veZ
z{MAvs1C}cRZdKlDyshxI%G(-m=Xtxp+d6L-d8?WtQl=_}s#2;d#iC@ZF>1G>Mz@Pv
zQhn|tPJUItza9j?y6UB4#M#!;{<Gb_(4h|eHaH(OM!n{E)Qvh#W_j)KNhC>HV0eTd
zv~k+y#}Q|y<xSdzahsMlWB=E5j5uWxUdx9Z!DSoz{H;a9UbNd96HHphMra9UPT|u(
z4Vchx4&g!i@KRMbln}2-+aQvb(z$`S>fF}F$`)}64)h;>0de*vj?)Z$vJ9WBpT3ZR
zPr~{1bQOLD>EpPx&KPm(N_a00wSrgdJ3vGk2GX&-#!Qo8g|Y9D?(;2-Z5Jbc7cQx<
zeCU?)>|fco=wXm2Fr|<F`kCuU#~zGzGN>L|=ieKU&{ZDT|AdF))L=sWL^Om{zRL%T
z0{9f}gh6((J<_Gl_@o@nLkPc(8{_2Rzwu<g=1sBhFa{p=8n%X=I@zcofxxmukWpKp
z%t{k=h)uBl+1_m91zfk_V!wqi4LGL#BrZBU(kIX4mp+a5N?%4lMjyt$OW#Gk(PvpX
z=2(_>*tGDvf;9OE+n6s1!?hZcf&)6j?_ucX?G*N(qq{;-hVGq6FX1|ki+1)xTxW3k
z{3>1YLfd2@zxm6TY0c)RGOez&9C1`8HcJ&3g{2P29Ltr}t#)`G`J$`MVY7R!BH9w6
zymD+`wx>_WONTM?_~Me%sR|v|&7kE-hnJ?=c6mA!Do<xsS}!d}8ZVkb=VBQhE11?#
zI_GB4d2xnLP2{4^7<@XO4T??X<$4M5Q@ISCRW=fWPv;&lU8bL(M!wL&RMxbX>5Qa-
zK9=c=O1F&8OAB;r&YqMG$9~Uumdf=r1v;y)PbeMgm~&L0AI}cL7<rsdsa(c-Or!g9
zF`sFlPF~M(fzILh@!C)L`B{%nJ?S=f+S2q@QIh2WK1=ldbfkTs<@2X~9efJi`;_iO
z<Hn}f+gRo{OOG;9KjcaMq)$`zpfrCDc%nN;^NIO8)?w=jW5i#sbcfBJFFkP%BRl2r
z>AfOP&zPLxC_S~gJAnIww0x<b|9MAmw`ckS=9gX>>X7=gJe1n+{m2*H4IK^F55T``
zU!O)^{|^*sm}L|#Lq5*V;Nz7Z4P*b9C3|H^gX5*rEbG&+LcYpkY0wS2GNeH}^=af~
zc{TF0G*&sJxH6=1x0f#C<2A_7(U74)>m`l6Kgiq4gGwW5;RSVUdW!9Qq;tD%8+yN4
zV_u#%Z9@1<h8<%!9KDQ;+6UQh;lDC-7UjQ8=GOu@OLN7^tTdN^a~juOxL%0s46bQ3
zUx$39Y1>nV9$$X+o6>ocPnU6<4r9bG;ZnMGB%&GxNA*g3Wjk}6<(PC1SH8{ibYBk~
zq04mx+aYBz0Gzncr}QVC^I4us`{f(5w3_1tOA*EiIUOiH)qzhh?|0ugk=}}vUFnti
zo;<x@$kOAic*TrZSy>l>cM8`u-riI~%b#N?Uuru(t^Bz4i&<Kp-d3DnQ+j1Kn5Xw<
zpPn_s!?r1H!SWi$h`%LE%j2zjs5Z^hdux{7O|?Ou*5xcMkGI3wN1om<W$BT(%-XuP
z!CBzt{b`=oFK20ayqTFXb*%KXzxp<kr}s9c$M?DF`bNjNSJw~FPMLY6SKiG_%KRh!
zD#s}8-`X#y&5!c-#`kB|7m9BlcKQht2$To(g|7v~Z^6a)NMFvppC=zFt!7eB$w@iY
z8J_-{g!m)>{XIrLeZJ7*yc=-_U++wNWlDY8(}1HiWKhk~U><2slj)f$4bcp7p=UQw
z;rNd6M&6yL(P29o-QcT@rx=#eG2l+bmvE`yDf1WV7g^@8@3MT4m%2B`u4d(xbAu`G
zK&}ppAI89^EeJg`?zmPaj<)e4;*<O^aeUr=+O#!CyXx4LHewd}B|d_*xyHTsrZ7e(
z+ePTeXR<6E<?$?V^1dK%(_H%?9idh7*@*R1f7!LGVYgDP23YMp=fy^yUc1@$)?L8|
z)}R;JZFz}YglV5-yOBOJWgQTCA{U>uIp)E}=gzPlu$mAwh8uM*D*(>Ge8@Am5}dx3
zeSv9&xmV%FIOxpPTkWfj?e3Tv3hN=ReV#Drd~SDet+7ue1j0Z!jPa!2MK|VCQLU1G
zMiD&nnbnP%U=nQWqYf64WOsHj)dB3>!M=dFFFW}^0E~W#{fqSA-{u|}?M34~BoGKI
z<G)OH>WZ?{ud*D|?=er8{!OGAH2-6WdwwX4k!HUYofJO-N;$SgRwqCt41sjP8+B4)
z`m_gA`Sm>wcH!h_ebfWX^AbHk2_sJrXw$jfRwrp};M*B+7>G+bKO-quf59$@L*1NA
z%Y-rF<i+%j!skq(U6d6A4azXEZYyhyXlWmKmWQYEtL=lQ((ms83++kr`g((&L~rU>
z%k)-eD}+%WI`&c)*y`Np@uVQg7rS7bwDUHyNElSnYVX7q#2H9~xPgH)CNRhua=yes
zoLO?St-gFbd25{Fhm6;8X<M=0D$)$I>h*Y^s_#klUO^qKSL!yOglm=bldsfYv=bnr
z3<LSIc5(?(s?@>MPjH-8yeG>}%G#YWvfarq>tp)yAbiJTX*!G%KZQ%=9d`EG-JM2v
zr!8Om&)YBIEKC2M^#dugZxdGbE5K$`I5}1JlNL6~-oc~r)Bs)?PrAEf7EivtSe}L;
zS;`ap1?kP=X+wF!+*lOEZ~cHVuzb-jfGD}C9^fml6ZCFeECT~^<0X9scy;T}@R4(8
znuAe05M3k3l!1<>+V(6tnkX;2Z6!vIi&;51C(pJu5Urr(+3NGXM5D`An6@$bBWxC*
z$PaG-kBvfn_#~%`MWm^VW&31%5(he-J2Twc586qyG4wTK@-fEGeTVGUH}=QvKw_=d
z2;Y_oLku(+EPr8)IOl1ikMb=Rg3CVZ>*RvJu>o16XY_Jv5mDh?VcN$zKeP275#MRk
zWn(^d6C<B|32%+<{8lNURkS%Eq6~wrE2Cq}<0a-(zj+>YydoaklWn8(RVF`Z%aFg1
z+kCAjMw+%G{HF6yw{?to93y=_u0`NC;-runDL<DFPF;$T=B4z>4};IM*s6t1(4+KA
z;@NT&=L?*NYh5woci=LznEvi<O%lAkO&D3q<_xDUT?efgm(o|==4H{oFstuO>EjuB
z)s9-IJ10x#UG-*UxdB=+E?*YX&dZ{(CtH>_>JnM7E-!w#ne|`AJ^@6OVNf37hi@=_
z)`Mw3WxHFvBeZ??6NN#RBT?{y_g}X-Oy7sN$~vW8!Wej0EpE8A!!38*Y&K&I0V2vU
zq`b#WUg1q)v?tMth0Wq)Q}N*!!3T%c3?I_3yv?WBlazGmgb}pP%LhYA>sY2fgM4`J
zB~!;L=r7}+{4rn&bf|j{J$%-1vF^i;0aZ5!RO$I;43HRTFp$<PJ#o%0dTnC-fTCo3
z9~nYmdHTz&Kilqinhh~G=HCkWE+1Sc)`{TY`XVFj56tuR#d;K`b{JV0;B#lXM%Tn)
z`8#p>zQQ(*(8%j_l8mVT$b+Cm8NBuiW2ComsoYhOJKfw%9u6rt#5Z!2=Q6oD4w4>q
zp>p4AVSxY0<vwZaqRwK(JGjE(K!>9sZ1-Ek0XC5V&R}^x!Zlp#pE~ld(7ZGF+eoEM
z(I=I?GhB~BjyltN-1^Fo`<+4SgI-GC8SVs+l-tSsgx-;^Ujm6Ao4k``;haQd*=d_C
z!203?INQ6}c0dH2!P*1+_!T5GvZy`7r#U?J(>fQN)Hl^0A3|B-Eq&dR-gwyeAo@%O
zkIx~JG+hT%p14*@yjeVP%}#jQYV|mHT=W*wSiU%R5D^&&%!iVoulFt@dJI1CI-ZUn
z<|#k$2~rREk#f+<5ssg_&O%((G2-+g@}9~%<lV`<Ho3|P2aa2ZV!IMXc^{Fr*GQM3
z9K37|3N)PG<huiDz<(ZLTagd$Q}BFq7$e=qB|7uBVFSj%@<kg1qU4%<%6j?W1Au_?
zL2v~TRwZS@kDIG|x|%sgP<PL^G}t%J491)m2u<pmK2L2IbdT(VrCP+7FB8bOuL~W+
zP*!B_AwM)b&7}bGInD%tt=3l0)z+}j7lCk=;kuEhw~71<O>SFfVT31>uD=UDPxk@_
zf2}XiFWGp+@<QD`3VpuCrm3S(AWqrxI*I_JUHDhHv(iGh;;c3^Cp!r|GuPN@u0}v&
z8i9P$1}-1mV6xOMv~T<Er7+rmnVnO{7zF#c#CA7_+lWeiMSBHL%tRnRvuF;0BQ(2%
zW}{oj0NaesWH{Av{+;A})U8IuWF-hr?pTskufXt__MR$zjb(YMjEoCE#bYFbcN+QG
zc^(k60DLTHc8KQqIuLVle6fwxx8334u^%E&{Dv*-e3Y(}!)^-S3c&lEzs6to{tLPj
z-*>sD$NKpAEN{3-^F8LN=`cq63@*{n)y}B5i*5PWdVGK3NSU!wzAt6YvyFzGNXtYh
z#C!xRCv5f#lchSMAzPk~d>L__E6%d5A#jD)M24pVk44)BBFZq_3}0+dZMzqxW!*cY
z!l2V5k+;UpHaP%3+ZK6JXIcBslJo5-D{^|re#n2m-(X#$a4rbCh3*40pd5VtI*PeA
z08g2{__O#pt9)=LL$BRKQe-Of;UQQY>JabZEW+l_+86-{l&N4>=1k<8vn|0ixYYO8
zk$x^NYd>L(IPFLDH5}}=M@S$rpLiLYRoXecyk1z(H&K*|^Xs_{Y13CW5HooqoO_?X
zP+5=CvtN0-W&M~qF=&x(p`9KRle)Qfm32oc0(mof4n7kj&ix7sqd#IGO)JBZ|3Q2)
zO=oOD`QRMK@{ve`TYULW;GbtzUG6k9csC<6eTLMP9wVI~bBbVPnP(q^?1DeZj*&mn
zN9sIX<z7-=5_dFpDs3&txs;J%)WgvoH;&3&nIGS=&OdJNMU4xZ>)N9*Ua`#}i=o%v
z8?sj+DSQ<BoQGg>@R)es<7V2W0z#BY<Z5Cdzh=BUbx*zD%vn34he9J>VVpE%u6PyS
zq*{^WD4aZUu1FkSOy9th!KUZFGf0|#`tk7ee|hOJMgrwL-eWfxomDT(O|CaHhn{=<
zc^_H_y2FnV=bYQ=%}%FDkKds<H;(#)VYJt5cXkMHW#`2QrfHGkcBDoBW9-=Qe46+h
z+7+%He5}x1%Xh}6fGhJ7)}_9TG>MBae-<~XW0;r;4${m!iOXyp0X(YSOM76jb<Eci
zOpy?zEY5-&>u~uK=l3j+F?#-@^Ox%@=cA-IBrya_Ka3G)N8&kC{V;9w=I;j#S%OP{
zCwyujTN4v=bZAQqEDPT|e=#Q~{KNbk1tSQ)X7OlqG2(aQQu*|S<cad2x}U|v*HNdf
zLwMjk!|_l<0^y1BKsqcti-&KebqEjlAnkZC>V3jIu>QmF@NYRD&RHIW5AhqL_U3lC
zF&>QSYdgj|N%vM<fy=@S0v?7S=Am8ZTNYW<N${Fi$6o%syflmacA6IwkKMM6hn1bw
z?q>2}ky9ROmmdRNO}{Hh(*PHE*i|0t^}!DQdw|UwNu8T25J&@I{?oW={4c!tm%R8t
z*f`c)<~i4SUbE5MYDYM7-HwvZ!|fLvwF({j{CDDdell*1z4O(Ce-zgpC2+ha2QMhX
z=f4N|Vi6vE1n^TO@Ed^NS%lAXF7vD$9I_ncJHRO!Ridk-_S?7H{pP+e3vpgRnlo@B
z(w~Au*&oEUl;eT$hj5)PfhU09m4n02AAJenFBG51CN-6=RSef`N6b5qKHzY!4o1y(
zgsH*H0Fw5>+~DY&Tt0HpjJ?iS#TFd+%A*?&r`6ur-ehsfBM;XQKQn~~%Jn#|vpN3X
zg0c?-es`&^UQ`Obrxbdw6iWFqS3CL$o>8yU91ZXrh2gn&yB)RrvWZO8AaY<FJxV+E
z@Wy*l7cZ(ZOlI`)T;RShi;E3u@{g885m`6!K0FCeW)?<=m|GnE9pK%|Nn7$_f6j6A
z4^sF#qQWcbevWYTxb3}jb_ZlM9(6W1{qdf3zY4tN61xAG!ZUQgL--WB;=}MhHyG^$
z)9`Z~e&GHb4CABB#{>yCDVP58LgcuGndB`>GpIKmNB0m98_hA%2*>zyY#ylAy*St{
zSa$JYkbCa0fPX8lviT9eB?&*nU6~#Ew5!NtAPjbU>=xDTfGb`GuJl=_(6Mmkd)dMz
zuU=2~aTL63JuT_NCXX#HXMT>cock??%J%=_-!||O;TPn8AtgTxu(I==<wyPh8?@!I
zbHWFW1}jbG|2WIJW9Fhe_~~QkOK@{XydCa+({RnPZHN2XX}IQ?wcsv-hs!0n`J>ac
z3F2-}!Zqh;)_^8-PXTv49aoP)JN%OW3c)R4ueG6V4!v6X<mJ7S=zB++$v1g1{{zal
ziO|j-TNYmK0RHcl(8iZf|9G<CvJL-e8m@O9l(>IB4cAIYp2@=(%W;i1y!kTe{_Qke
zkM3#U{!=+_;YhIZ@!b-9cP!T%Bf!V;a2l>T!mBzyezF8NcP!W8-aZA_s#x3O_);0J
zI|^$QN7=~l@>E<Ib{yT8OvAM&p_K0Z<+%2=SvsF459Xg@S=+?UAB%etoSHsG-1;=S
z=2)xa_u5ok>8gT@{&9S_1h?dvs>6TeCh%d)$A6;?KYLWw@%^D`xaJ6|!~NZIT&uhD
z8Qp!V9M?ZCDs&gYulcuDwoUR!K-t!3fNRE`GF<Oin>h|B^jYQ`CA=8=UKw*t&++u1
z6U(q}b5xT&f&UY8({V*Hmj4q^orvr6lJ*7CFY9CE-zwhC4<YM`$^`n=x<}vB59z;r
zVwtS0r2qPfxE}qiE>D<$>lNF~@SmP_C;ic3=-bhZI$c7Uca)SVIhrVKi#fxI_m|*f
zM`k5GRb_ktb@SLHT<<s_`M4dp<{x!gIXR9YTk0l``43$IN2ZyigLS_Xe^yebo~R)X
zWibDf%hE}*NAaXi%q>rRrG%b$bWZT#H%^#;$Yp7oe&UYAIoxlS&@?t##Ql#F+}trX
zp^JItlkz{qAM$^N^WPJGVG%N=%>L_-`uu(&f7zUHu?viBBj7C@orq`NDu~B<@<#;E
zYzp%ak}x0NN*2u6o!Q(|tK{|{5$`!dCx@q-fI!REw{Vx>6%QzA{@o_Ou<@VySn~*G
z{cG?x;Fxi?xFMZ1*v>zOe?BhUYxGgr0IYJ>B)_=HR`bpKLUHpe^Pd5In>k8x)2HUg
zLLd3L&5@RV@I(Gna^V$1zqlcd^l1;TH1higcGkULpNc(DjyD-S6gFxppVR(biM6c-
z^G<`066i1H-<Grg9cgJV;Qz7shiq{(3-j^)YC+$DwvlE~+01-v!p0Db$G$b~zn@q)
zS=f>Kb@M@S!-Dc@-j|A-1(?ro9FzX7iSIR`@xNLJkP%o8>j?{H>`Ff(6OOf#L;w2|
zYbFctHac`4Pc7}z|LSt>?ahLpew?&2ESPy?@mnC)O%@(qmL;{sJksxP%=@iuo|}(g
zeP-cf%h|nP*u${!39fD=U<846WBp{|4+X}XaiR+U;}q`3NaFu#3YV7*#s6#ymx({&
z@J9=uUoKzl*Zi;M^S!lo@Lc#mEA{>j`Dg30U6C@f5dLigx2s8JO^9nh3(Y}q*cf+k
zTs4p%I0xyECx_TBgAK$>4QxVhCrQME)d^OFv3zdh=CDj9Fi)Jumj5O5B#&uH{=^i&
z%OuTapnr+PmW6(6&<pIJ3T1UIkTE^5=ayxyjI#^QfC8DW$T-e)mA6{JT}-&D%#~Y>
zUmycnq{9vcvxz|e;i}t6WRqOKJ+1^BgTc5l+Dw8W{-?~}u;MS&js0lYNRrMDPG|Yh
zKv%)=PuXNJN`mH~ef4Um*@1FEU<=Yfc@Sz7KahpAk&WU@O{&Z!jYj=O5130tH7b>L
zX-R@uA3xFVHIi#yf%M1E!BW~hwmHnQvPqc!5V&r=#2-A`N;rq|ejyz!8Gy8@Fd&m8
ziCx|9H^&{UCK~uQ&eNM(4Civ@UQgOb_;GJ%xYcO|m~2Pw9VjK*9gMCuMzYZWMCEU!
zrlh7|G3HYXgf==e`S`nSwA*Qow@l6c=K{-%F8;#|Nk3{eI##}B5>X;C8Yplt{XSxu
zci&5FdayknZjZG!vW;wM(i}GX`W-(BvS~E*m<@?{b&D@PGlFq9_>+%TW88?k4gOcS
z)oKP?!<OX`?uUl6Z|g2y_7761zsT=_Ve4i+Kj;to(Fp6^JN#f^6y;2S79dP=?~r9p
zHJ1G(W;IM<j2TiiFlkJy(cNwAClQRIhi)`z1?KZaWK%fn+-bJ!<9(cM<T~-F-EHIF
z>=Av3_sx>c>?M1hzWJE3Gr;c=(odUgK9N5MPnp0`l}a?+ZS^CXSKyK+M%AQnqyWa}
zzdAqv)#<<JMCdwd_0F~aV0U*5F0j|ac?on`uJUcbld*Nhy<}3gG?ldE8>Ms&xURZ<
zxxx$EfC)TM9X?YrVZKMnyO6VKe%Y_nCIfuz3C4SMe8{Pr{SHuY9ZXjO8-ZhOjtP;U
zMY#lka8}*Hu7l|36}b5nT@xv~LKMB**l2fy@-HfA%)0u~bP?NMqIPjCLAyAXm@`Yr
z-a77@$+2(RwM=T&q;vr{yFx21!#-}t1W^Xo{u~&~oQNB`wKQtL+0{*N`O-zPI_a%G
zY7`Zqf4g7trEw3A<pRL%(#MJyznI3cHs^3w*X&4V-tM#OY#j4Mv<ou)Nfe7-9Qq`V
zg%XZ{5=X`6WtdvQrgW3=Ry}}RfMF#hEreAgFHwfQE(o@6Q$>E^h7=5fC6__4^%(@q
zaRvcPC;6ojQGyIe64QkZX=(vWL))1B2~xV$pbH5`GQlz|O4NJJ2XQzqj7IWA3%U0a
zw5W^YH{b9UJc!LE40y0n4i)k(E8weCz;iVzel3ur8#>zvxZ|C>%+ogmH$rn`F*os=
z$+qk@)VVIcd(^oZj89H&aB<oy(^TA0^KiS$TaCAsV5imMZjm~t9gJhLC~@mLz`FQ^
G;Qs)(;p;~L
literal 0
HcmV?d00001
diff --git a/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dts b/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..e22c5d055f47
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dts
@@ -0,0 +1,1263 @@
+/dts-v1/;
+
+/*
+ * Raspberry Pi 3 Model B+ DTS (Device Tree Source), for UEFI firmware.
+ *
+ * This source is the mostly identical to the decompiled version of the
+ * official DTB (Device Tree Binary), as found at:
+ * https://github.com/raspberrypi/firmware/tree/master/boot
+ *
+ * Only the following changes were applied:
+ * - Two fixes for USB keyboard support under the usb@7e980000 section:
+ * compatible = "brcm,bcm2708-usb"; -> compatible = "brcm,bcm2835-usb";
+ * interrupts = <0x2 0x0 0x1 0x9>; -> interrupts = <0x1 0x9>;
+ * - A 'psci' section was added, as it is provided by the ATF
+ * - The 'enable-method' for CPUs was swicthed to "psci" instead of "spin-table"
+ */
+
+/memreserve/ 0x0000000000000000 0x0000000000001000;
+/ {
+ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B+";
+ interrupt-parent = <0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ aliases {
+ serial0 = "/soc/serial@7e215040";
+ serial1 = "/soc/serial@7e201000";
+ audio = "/soc/audio";
+ aux = "/soc/aux@0x7e215000";
+ sound = "/soc/sound";
+ soc = "/soc";
+ dma = "/soc/dma@7e007000";
+ intc = "/soc/interrupt-controller@7e00b200";
+ watchdog = "/soc/watchdog@7e100000";
+ random = "/soc/rng@7e104000";
+ mailbox = "/soc/mailbox@7e00b880";
+ gpio = "/soc/gpio@7e200000";
+ uart0 = "/soc/serial@7e201000";
+ sdhost = "/soc/mmc@7e202000";
+ mmc0 = "/soc/mmc@7e202000";
+ i2s = "/soc/i2s@7e203000";
+ spi0 = "/soc/spi@7e204000";
+ i2c0 = "/soc/i2c@7e205000";
+ uart1 = "/soc/serial@7e215040";
+ spi1 = "/soc/spi@7e215080";
+ spi2 = "/soc/spi@7e2150c0";
+ mmc = "/soc/mmc@7e300000";
+ mmc1 = "/soc/mmc@7e300000";
+ i2c1 = "/soc/i2c@7e804000";
+ i2c2 = "/soc/i2c@7e805000";
+ usb = "/soc/usb@7e980000";
+ leds = "/leds";
+ fb = "/soc/fb";
+ vchiq = "/soc/vchiq";
+ thermal = "/soc/thermal@7e212000";
+ axiperf = "/soc/axiperf";
+ ethernet0 = "/soc/usb@7e980000/usb1@1/usb1_1@1/usbether@1";
+ };
+
+ chosen {
+ bootargs = "8250.nr_uarts=1";
+ };
+
+ thermal-zones {
+
+ cpu-thermal {
+ polling-delay-passive = <0x0>;
+ polling-delay = <0x3e8>;
+ thermal-sensors = <0x2>;
+ coefficients = <0xfffffde6 0x64960>;
+ phandle = <0x31>;
+
+ cooling-maps {
+ };
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges = <0x7e000000 0x3f000000 0x1000000 0x40000000 0x40000000 0x1000>;
+ dma-ranges = <0xc0000000 0x0 0x3f000000>;
+ phandle = <0x32>;
+
+ dma@7e007000 {
+ compatible = "brcm,bcm2835-dma";
+ reg = <0x7e007000 0xf00>;
+ interrupts = <0x1 0x10 0x1 0x11 0x1 0x12 0x1 0x13 0x1 0x14 0x1 0x15 0x1 0x16 0x1 0x17 0x1 0x18 0x1 0x19 0x1 0x1a 0x1 0x1b 0x1 0x1b 0x1 0x1b 0x1 0x1b 0x1 0x1c>;
+ interrupt-names = "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7", "dma8", "dma9", "dma10", "dma11", "dma12", "dma13", "dma14", "dma-shared-all";
+ #dma-cells = <0x1>;
+ brcm,dma-channel-mask = <0x7f34>;
+ phandle = <0xb>;
+ };
+
+ interrupt-controller@7e00b200 {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ interrupt-parent = <0x3>;
+ interrupts = <0x8>;
+ phandle = <0x1>;
+ };
+
+ watchdog@7e100000 {
+ compatible = "brcm,bcm2835-pm-wdt";
+ reg = <0x7e100000 0x28>;
+ phandle = <0x24>;
+ };
+
+ cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <0x1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <0x4 0x5 0x0 0x5 0x1 0x5 0x2 0x6 0x0 0x6 0x1 0x6 0x2>;
+ firmware = <0x7>;
+ phandle = <0x8>;
+ };
+
+ rng@7e104000 {
+ compatible = "brcm,bcm2835-rng";
+ reg = <0x7e104000 0x10>;
+ interrupts = <0x2 0x1d>;
+ phandle = <0x25>;
+ };
+
+ mailbox@7e00b880 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7e00b880 0x40>;
+ interrupts = <0x0 0x1>;
+ #mbox-cells = <0x0>;
+ phandle = <0x1a>;
+ };
+
+ gpio@7e200000 {
+ compatible = "brcm,bcm2835-gpio";
+ reg = <0x7e200000 0xb4>;
+ interrupts = <0x2 0x11 0x2 0x12>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ phandle = <0x10>;
+
+ dpi_gpio0 {
+ brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b>;
+ brcm,function = <0x6>;
+ phandle = <0x33>;
+ };
+
+ emmc_gpio22 {
+ brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>;
+ brcm,function = <0x7>;
+ phandle = <0x34>;
+ };
+
+ emmc_gpio34 {
+ brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>;
+ brcm,function = <0x7>;
+ brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>;
+ phandle = <0x35>;
+ };
+
+ emmc_gpio48 {
+ brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>;
+ brcm,function = <0x7>;
+ phandle = <0x36>;
+ };
+
+ gpclk0_gpio4 {
+ brcm,pins = <0x4>;
+ brcm,function = <0x4>;
+ phandle = <0x37>;
+ };
+
+ gpclk1_gpio5 {
+ brcm,pins = <0x5>;
+ brcm,function = <0x4>;
+ phandle = <0x38>;
+ };
+
+ gpclk1_gpio42 {
+ brcm,pins = <0x2a>;
+ brcm,function = <0x4>;
+ phandle = <0x39>;
+ };
+
+ gpclk1_gpio44 {
+ brcm,pins = <0x2c>;
+ brcm,function = <0x4>;
+ phandle = <0x3a>;
+ };
+
+ gpclk2_gpio6 {
+ brcm,pins = <0x6>;
+ brcm,function = <0x4>;
+ phandle = <0x3b>;
+ };
+
+ gpclk2_gpio43 {
+ brcm,pins = <0x2b>;
+ brcm,function = <0x4>;
+ phandle = <0x3c>;
+ };
+
+ i2c0_gpio0 {
+ brcm,pins = <0x0 0x1>;
+ brcm,function = <0x4>;
+ phandle = <0x3d>;
+ };
+
+ i2c0_gpio28 {
+ brcm,pins = <0x1c 0x1d>;
+ brcm,function = <0x4>;
+ phandle = <0x3e>;
+ };
+
+ i2c0_gpio44 {
+ brcm,pins = <0x2c 0x2d>;
+ brcm,function = <0x5>;
+ phandle = <0x3f>;
+ };
+
+ i2c1_gpio2 {
+ brcm,pins = <0x2 0x3>;
+ brcm,function = <0x4>;
+ phandle = <0x40>;
+ };
+
+ i2c1_gpio44 {
+ brcm,pins = <0x2c 0x2d>;
+ brcm,function = <0x6>;
+ phandle = <0x41>;
+ };
+
+ i2c_slave_gpio18 {
+ brcm,pins = <0x12 0x13 0x14 0x15>;
+ brcm,function = <0x7>;
+ phandle = <0x42>;
+ };
+
+ jtag_gpio4 {
+ brcm,pins = <0x4 0x5 0x6 0xc 0xd>;
+ brcm,function = <0x2>;
+ phandle = <0x43>;
+ };
+
+ jtag_gpio22 {
+ brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>;
+ brcm,function = <0x3>;
+ phandle = <0x44>;
+ };
+
+ pcm_gpio18 {
+ brcm,pins = <0x12 0x13 0x14 0x15>;
+ brcm,function = <0x4>;
+ phandle = <0x45>;
+ };
+
+ pcm_gpio28 {
+ brcm,pins = <0x1c 0x1d 0x1e 0x1f>;
+ brcm,function = <0x6>;
+ phandle = <0x46>;
+ };
+
+ pwm0_gpio12 {
+ brcm,pins = <0xc>;
+ brcm,function = <0x4>;
+ phandle = <0x47>;
+ };
+
+ pwm0_gpio18 {
+ brcm,pins = <0x12>;
+ brcm,function = <0x2>;
+ phandle = <0x48>;
+ };
+
+ pwm0_gpio40 {
+ brcm,pins = <0x28>;
+ brcm,function = <0x4>;
+ phandle = <0x49>;
+ };
+
+ pwm1_gpio13 {
+ brcm,pins = <0xd>;
+ brcm,function = <0x4>;
+ phandle = <0x4a>;
+ };
+
+ pwm1_gpio19 {
+ brcm,pins = <0x13>;
+ brcm,function = <0x2>;
+ phandle = <0x4b>;
+ };
+
+ pwm1_gpio41 {
+ brcm,pins = <0x29>;
+ brcm,function = <0x4>;
+ phandle = <0x4c>;
+ };
+
+ pwm1_gpio45 {
+ brcm,pins = <0x2d>;
+ brcm,function = <0x4>;
+ phandle = <0x4d>;
+ };
+
+ sdhost_gpio48 {
+ brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>;
+ brcm,function = <0x4>;
+ phandle = <0xc>;
+ };
+
+ spi0_gpio7 {
+ brcm,pins = <0x7 0x8 0x9 0xa 0xb>;
+ brcm,function = <0x4>;
+ phandle = <0x4e>;
+ };
+
+ spi0_gpio35 {
+ brcm,pins = <0x23 0x24 0x25 0x26 0x27>;
+ brcm,function = <0x4>;
+ phandle = <0x4f>;
+ };
+
+ spi1_gpio16 {
+ brcm,pins = <0x10 0x11 0x12 0x13 0x14 0x15>;
+ brcm,function = <0x3>;
+ phandle = <0x50>;
+ };
+
+ spi2_gpio40 {
+ brcm,pins = <0x28 0x29 0x2a 0x2b 0x2c 0x2d>;
+ brcm,function = <0x3>;
+ phandle = <0x51>;
+ };
+
+ uart0_gpio14 {
+ brcm,pins = <0xe 0xf>;
+ brcm,function = <0x4>;
+ phandle = <0x52>;
+ };
+
+ uart0_ctsrts_gpio16 {
+ brcm,pins = <0x10 0x11>;
+ brcm,function = <0x7>;
+ phandle = <0x53>;
+ };
+
+ uart0_ctsrts_gpio30 {
+ brcm,pins = <0x1e 0x1f>;
+ brcm,function = <0x7>;
+ phandle = <0x54>;
+ };
+
+ uart0_gpio32 {
+ brcm,pins = <0x20 0x21>;
+ brcm,function = <0x7>;
+ phandle = <0x55>;
+ };
+
+ uart0_gpio36 {
+ brcm,pins = <0x24 0x25>;
+ brcm,function = <0x6>;
+ phandle = <0x56>;
+ };
+
+ uart0_ctsrts_gpio38 {
+ brcm,pins = <0x26 0x27>;
+ brcm,function = <0x6>;
+ phandle = <0x57>;
+ };
+
+ uart1_gpio14 {
+ brcm,pins = <0xe 0xf>;
+ brcm,function = <0x2>;
+ phandle = <0x58>;
+ };
+
+ uart1_ctsrts_gpio16 {
+ brcm,pins = <0x10 0x11>;
+ brcm,function = <0x2>;
+ phandle = <0x59>;
+ };
+
+ uart1_gpio32 {
+ brcm,pins = <0x20 0x21>;
+ brcm,function = <0x2>;
+ phandle = <0x5a>;
+ };
+
+ uart1_ctsrts_gpio30 {
+ brcm,pins = <0x1e 0x1f>;
+ brcm,function = <0x2>;
+ phandle = <0x5b>;
+ };
+
+ uart1_gpio40 {
+ brcm,pins = <0x28 0x29>;
+ brcm,function = <0x2>;
+ phandle = <0x5c>;
+ };
+
+ uart1_ctsrts_gpio42 {
+ brcm,pins = <0x2a 0x2b>;
+ brcm,function = <0x2>;
+ phandle = <0x5d>;
+ };
+
+ dpi_18bit_gpio0 {
+ brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13 0x14 0x15>;
+ brcm,function = <0x6>;
+ phandle = <0x5e>;
+ };
+
+ spi0_pins {
+ brcm,pins = <0x9 0xa 0xb>;
+ brcm,function = <0x4>;
+ phandle = <0xe>;
+ };
+
+ spi0_cs_pins {
+ brcm,pins = <0x8 0x7>;
+ brcm,function = <0x1>;
+ phandle = <0xf>;
+ };
+
+ i2c0 {
+ brcm,pins = <0x0 0x1>;
+ brcm,function = <0x4>;
+ phandle = <0x11>;
+ };
+
+ i2c1 {
+ brcm,pins = <0x2 0x3>;
+ brcm,function = <0x4>;
+ phandle = <0x15>;
+ };
+
+ i2s {
+ brcm,pins = <0x12 0x13 0x14 0x15>;
+ brcm,function = <0x4>;
+ phandle = <0xd>;
+ };
+
+ sdio_pins {
+ brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>;
+ brcm,function = <0x7>;
+ brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>;
+ phandle = <0x19>;
+ };
+
+ bt_pins {
+ brcm,pins = <0x2b>;
+ brcm,function = <0x4>;
+ brcm,pull = <0x0>;
+ phandle = <0xa>;
+ };
+
+ uart0_pins {
+ brcm,pins = <0x20 0x21>;
+ brcm,function = <0x7>;
+ brcm,pull = <0x0 0x2>;
+ phandle = <0x9>;
+ };
+
+ uart1_pins {
+ brcm,pins;
+ brcm,function;
+ brcm,pull;
+ phandle = <0x13>;
+ };
+
+ audio_pins {
+ brcm,pins = <0x28 0x29>;
+ brcm,function = <0x4>;
+ phandle = <0x1b>;
+ };
+ };
+
+ serial@7e201000 {
+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ reg = <0x7e201000 0x1000>;
+ interrupts = <0x2 0x19>;
+ clocks = <0x8 0x13 0x8 0x14>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x241011>;
+ cts-event-workaround;
+ pinctrl-names = "default";
+ pinctrl-0 = <0x9 0xa>;
+ status = "okay";
+ phandle = <0x1d>;
+ };
+
+ mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <0x2 0x18>;
+ clocks = <0x8 0x14>;
+ dmas = <0xb 0xd>;
+ dma-names = "rx-tx";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <0xc>;
+ bus-width = <0x4>;
+ brcm,overclock-50 = <0x0>;
+ brcm,pio-limit = <0x1>;
+ phandle = <0x26>;
+ };
+
+ i2s@7e203000 {
+ compatible = "brcm,bcm2835-i2s";
+ reg = <0x7e203000 0x24>;
+ clocks = <0x8 0x1f>;
+ dmas = <0xb 0x2 0xb 0x3>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ #sound-dai-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <0xd>;
+ phandle = <0x1f>;
+ };
+
+ spi@7e204000 {
+ compatible = "brcm,bcm2835-spi";
+ reg = <0x7e204000 0x1000>;
+ interrupts = <0x2 0x16>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ dmas = <0xb 0x6 0xb 0x7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <0xe 0xf>;
+ cs-gpios = <0x10 0x8 0x1 0x10 0x7 0x1>;
+ phandle = <0x20>;
+
+ spidev@0 {
+ compatible = "spidev";
+ reg = <0x0>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ spi-max-frequency = <0x7735940>;
+ phandle = <0x5f>;
+ };
+
+ spidev@1 {
+ compatible = "spidev";
+ reg = <0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ spi-max-frequency = <0x7735940>;
+ phandle = <0x60>;
+ };
+ };
+
+ i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <0x2 0x15>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x11>;
+ clock-frequency = <0x186a0>;
+ phandle = <0x21>;
+ };
+
+ pixelvalve@7e206000 {
+ compatible = "brcm,bcm2835-pixelvalve0";
+ reg = <0x7e206000 0x100>;
+ interrupts = <0x2 0xd>;
+ status = "disabled";
+ phandle = <0x61>;
+ };
+
+ pixelvalve@7e207000 {
+ compatible = "brcm,bcm2835-pixelvalve1";
+ reg = <0x7e207000 0x100>;
+ interrupts = <0x2 0xe>;
+ status = "disabled";
+ phandle = <0x62>;
+ };
+
+ dpi@7e208000 {
+ compatible = "brcm,bcm2835-dpi";
+ reg = <0x7e208000 0x8c>;
+ clocks = <0x8 0x14 0x8 0x2c>;
+ clock-names = "core", "pixel";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ phandle = <0x63>;
+ };
+
+ dsi@7e209000 {
+ compatible = "brcm,bcm2835-dsi0";
+ reg = <0x7e209000 0x78>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ clocks = <0x8 0x20 0x8 0x2f 0x8 0x31>;
+ clock-names = "phy", "escape", "pixel";
+ clock-output-names = "dsi0_byte", "dsi0_ddr2", "dsi0_ddr";
+ phandle = <0x5>;
+ };
+
+ thermal@7e212000 {
+ compatible = "brcm,bcm2837-thermal";
+ reg = <0x7e212000 0x8>;
+ clocks = <0x8 0x1b>;
+ #thermal-sensor-cells = <0x0>;
+ status = "okay";
+ phandle = <0x2>;
+ };
+
+ aux@0x7e215000 {
+ compatible = "brcm,bcm2835-aux";
+ #clock-cells = <0x1>;
+ reg = <0x7e215000 0x8>;
+ clocks = <0x8 0x14>;
+ interrupts = <0x1 0x1d>;
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+ phandle = <0x12>;
+ };
+
+ serial@7e215040 {
+ compatible = "brcm,bcm2835-aux-uart";
+ reg = <0x7e215040 0x40>;
+ interrupts = <0x0>;
+ clocks = <0x12 0x0>;
+ status = "okay";
+ interrupt-parent = <0x12>;
+ pinctrl-names = "default";
+ pinctrl-0 = <0x13>;
+ phandle = <0x1e>;
+ };
+
+ spi@7e215080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>;
+ interrupts = <0x1>;
+ clocks = <0x12 0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ interrupt-parent = <0x12>;
+ phandle = <0x64>;
+ };
+
+ spi@7e2150c0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150c0 0x40>;
+ interrupts = <0x2>;
+ clocks = <0x12 0x2>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ interrupt-parent = <0x12>;
+ phandle = <0x65>;
+ };
+
+ pwm@7e20c000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x7e20c000 0x28>;
+ clocks = <0x8 0x1e>;
+ assigned-clocks = <0x8 0x1e>;
+ assigned-clock-rates = <0x989680>;
+ #pwm-cells = <0x2>;
+ status = "disabled";
+ phandle = <0x66>;
+ };
+
+ hvs@7e400000 {
+ compatible = "brcm,bcm2835-hvs";
+ reg = <0x7e400000 0x6000>;
+ interrupts = <0x2 0x1>;
+ status = "disabled";
+ phandle = <0x67>;
+ };
+
+ dsi@7e700000 {
+ compatible = "brcm,bcm2835-dsi1";
+ reg = <0x7e700000 0x8c>;
+ interrupts = <0x2 0xc>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ clocks = <0x8 0x23 0x8 0x30 0x8 0x32>;
+ clock-names = "phy", "escape", "pixel";
+ clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
+ status = "disabled";
+ phandle = <0x6>;
+ };
+
+ csi0@7e800000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e800000 0x800 0x7e802000 0x4>;
+ interrupts = <0x2 0x6>;
+ clocks = <0x8 0x2d>;
+ clock-names = "lp";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ status = "disabled";
+ power-domains = <0x14 0xc>;
+ phandle = <0x68>;
+ };
+
+ csi1@7e801000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e801000 0x800 0x7e802004 0x4>;
+ interrupts = <0x2 0x7>;
+ clocks = <0x8 0x2e>;
+ clock-names = "lp";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ status = "disabled";
+ power-domains = <0x14 0xd>;
+ phandle = <0x69>;
+
+ port {
+
+ endpoint {
+ data-lanes = <0x1 0x2>;
+ };
+ };
+ };
+
+ i2c@7e804000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e804000 0x1000>;
+ interrupts = <0x2 0x15>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x15>;
+ clock-frequency = <0x186a0>;
+ phandle = <0x22>;
+ };
+
+ i2c@7e805000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e805000 0x1000>;
+ interrupts = <0x2 0x15>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ clock-frequency = <0x186a0>;
+ phandle = <0x16>;
+ };
+
+ vec@7e806000 {
+ compatible = "brcm,bcm2835-vec";
+ reg = <0x7e806000 0x1000>;
+ clocks = <0x8 0x18>;
+ interrupts = <0x2 0x1b>;
+ status = "disabled";
+ phandle = <0x6a>;
+ };
+
+ pixelvalve@7e807000 {
+ compatible = "brcm,bcm2835-pixelvalve2";
+ reg = <0x7e807000 0x100>;
+ interrupts = <0x2 0xa>;
+ status = "disabled";
+ phandle = <0x6b>;
+ };
+
+ hdmi@7e902000 {
+ compatible = "brcm,bcm2835-hdmi";
+ reg = <0x7e902000 0x600 0x7e808000 0x100>;
+ interrupts = <0x2 0x8 0x2 0x9>;
+ ddc = <0x16>;
+ clocks = <0x8 0x10 0x8 0x19>;
+ clock-names = "pixel", "hdmi";
+ dmas = <0xb 0x11>;
+ dma-names = "audio-rx";
+ status = "disabled";
+ power-domains = <0x14 0x5>;
+ hpd-gpios = <0x10 0x1c 0x1>;
+ phandle = <0x6c>;
+ };
+
+ usb@7e980000 {
+ compatible = "brcm,bcm2835-usb";
+ reg = <0x7e980000 0x10000 0x7e006000 0x1000>;
+ interrupts = <0x1 0x9>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <0x17>;
+ clock-names = "otg";
+ phys = <0x18>;
+ phy-names = "usb2-phy";
+ power-domains = <0x14 0x6>;
+ phandle = <0x6d>;
+
+ usb1@1 {
+ compatible = "usb424,2514";
+ reg = <0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ usb1_1@1 {
+ compatible = "usb424,2514";
+ reg = <0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ usbether@1 {
+ compatible = "usb424,7800";
+ reg = <0x1>;
+ microchip,eee-enabled;
+ microchip,tx-lpi-timer = <0x258>;
+ microchip,led-modes = <0x1 0x6>;
+ phandle = <0x2d>;
+ };
+ };
+ };
+ };
+
+ v3d@7ec00000 {
+ compatible = "brcm,vc4-v3d";
+ reg = <0x7ec00000 0x1000>;
+ interrupts = <0x1 0xa>;
+ power-domains = <0x14 0xa>;
+ status = "disabled";
+ phandle = <0x6e>;
+ };
+
+ gpu {
+ compatible = "brcm,bcm2835-vc4";
+ status = "disabled";
+ phandle = <0x6f>;
+ };
+
+ local_intc@40000000 {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+ interrupt-parent = <0x3>;
+ phandle = <0x3>;
+ };
+
+ mmc@7e300000 {
+ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
+ reg = <0x7e300000 0x100>;
+ interrupts = <0x2 0x1e>;
+ clocks = <0x8 0x1c>;
+ dmas = <0xb 0xb>;
+ dma-names = "rx-tx";
+ brcm,overclock-50 = <0x0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x19>;
+ non-removable;
+ bus-width = <0x4>;
+ phandle = <0x27>;
+ };
+
+ firmwarekms@7e600000 {
+ compatible = "raspberrypi,rpi-firmware-kms";
+ reg = <0x7e600000 0x100>;
+ interrupts = <0x2 0x10>;
+ brcm,firmware = <0x7>;
+ status = "disabled";
+ phandle = <0x70>;
+ };
+
+ smi@7e600000 {
+ compatible = "brcm,bcm2835-smi";
+ reg = <0x7e600000 0x100>;
+ interrupts = <0x2 0x10>;
+ clocks = <0x8 0x2a>;
+ assigned-clocks = <0x8 0x2a>;
+ assigned-clock-rates = <0x7735940>;
+ dmas = <0xb 0x4>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ phandle = <0x71>;
+ };
+
+ axiperf {
+ compatible = "brcm,bcm2835-axiperf";
+ reg = <0x7e009800 0x100 0x7ee08000 0x100>;
+ firmware = <0x7>;
+ status = "disabled";
+ phandle = <0x28>;
+ };
+
+ gpiomem {
+ compatible = "brcm,bcm2835-gpiomem";
+ reg = <0x7e200000 0x1000>;
+ };
+
+ firmware {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <0x1a>;
+ phandle = <0x7>;
+ };
+
+ power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <0x7>;
+ #power-domain-cells = <0x1>;
+ phandle = <0x14>;
+ };
+
+ fb {
+ compatible = "brcm,bcm2708-fb";
+ firmware = <0x7>;
+ status = "okay";
+ phandle = <0x72>;
+ };
+
+ vchiq {
+ compatible = "brcm,bcm2835-vchiq";
+ reg = <0x7e00b840 0xf>;
+ interrupts = <0x0 0x2>;
+ cache-line-size = <0x20>;
+ firmware = <0x7>;
+ phandle = <0x1c>;
+ };
+
+ vcsm {
+ compatible = "raspberrypi,bcm2835-vcsm";
+ firmware = <0x7>;
+ status = "okay";
+ phandle = <0x73>;
+ };
+
+ audio {
+ compatible = "brcm,bcm2835-audio";
+ brcm,pwm-channels = <0x8>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x1b>;
+ phandle = <0x23>;
+ };
+
+ sound {
+ status = "disabled";
+ phandle = <0x74>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupt-parent = <0x3>;
+ interrupts = <0x9>;
+ };
+
+ expgpio {
+ compatible = "brcm,bcm2835-expgpio";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ firmware = <0x7>;
+ status = "okay";
+ phandle = <0x30>;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ clock@3 {
+ compatible = "fixed-clock";
+ reg = <0x3>;
+ #clock-cells = <0x0>;
+ clock-output-names = "osc";
+ clock-frequency = <0x124f800>;
+ phandle = <0x4>;
+ };
+
+ clock@4 {
+ compatible = "fixed-clock";
+ reg = <0x4>;
+ #clock-cells = <0x0>;
+ clock-output-names = "otg";
+ clock-frequency = <0x1c9c3800>;
+ phandle = <0x17>;
+ };
+ };
+
+ phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0x0>;
+ phandle = <0x18>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <0x3>;
+ interrupts = <0x0 0x1 0x3 0x2>;
+ always-on;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ enable-method = "brcm,bcm2836-smp";
+ phandle = <0x75>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xd8>;
+ phandle = <0x29>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xe0>;
+ phandle = <0x2a>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xe8>;
+ phandle = <0x2b>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xf0>;
+ phandle = <0x2c>;
+ };
+ };
+
+ fixedregulator_5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <0x4c4b40>;
+ regulator-max-microvolt = <0x4c4b40>;
+ regulator-always-on;
+ phandle = <0x76>;
+ };
+
+ fixedregulator_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <0x325aa0>;
+ regulator-max-microvolt = <0x325aa0>;
+ regulator-always-on;
+ phandle = <0x77>;
+ };
+
+ __overrides__ {
+ cam0-pwdn-ctrl;
+ cam0-pwdn;
+ cam0-led-ctrl;
+ cam0-led;
+ cache_line_size = [00 00 00 1c 63 61 63 68 65 2d 6c 69 6e 65 2d 73 69 7a 65 3a 30 00];
+ uart0 = [00 00 00 1d 73 74 61 74 75 73 00];
+ uart1 = [00 00 00 1e 73 74 61 74 75 73 00];
+ i2s = [00 00 00 1f 73 74 61 74 75 73 00];
+ spi = "", "", "", " status";
+ i2c0 = "", "", "", "!status";
+ i2c1 = "", "", "", "\"status";
+ i2c2_iknowwhatimdoing = [00 00 00 16 73 74 61 74 75 73 00];
+ i2c0_baudrate = "", "", "", "!clock-frequency:0";
+ i2c1_baudrate = "", "", "", "\"clock-frequency:0";
+ i2c2_baudrate = [00 00 00 16 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
+ audio = "", "", "", "#status";
+ watchdog = "", "", "", "$status";
+ random = "", "", "", "%status";
+ sd_overclock = "", "", "", "&brcm,overclock-50:0";
+ sd_force_pio = "", "", "", "&brcm,force-pio?";
+ sd_pio_limit = "", "", "", "&brcm,pio-limit:0";
+ sd_debug = "", "", "", "&brcm,debug";
+ sdio_overclock = "", "", "", "'brcm,overclock-50:0";
+ axiperf = "", "", "", "(status";
+ arm_freq = "", "", "", ")clock-frequency:0", "", "", "", "*clock-frequency:0", "", "", "", "+clock-frequency:0", "", "", "", ",clock-frequency:0";
+ eee = "", "", "", "-microchip,eee-enabled?";
+ tx_lpi_timer = "", "", "", "-microchip,tx-lpi-timer:0";
+ eth_led0 = "", "", "", "-microchip,led-modes:0";
+ eth_led1 = "", "", "", "-microchip,led-modes:4";
+ act_led_gpio = "", "", "", ".gpios:4";
+ act_led_activelow = "", "", "", ".gpios:8";
+ act_led_trigger = "", "", "", ".linux,default-trigger";
+ pwr_led_gpio = "", "", "", "/gpios:4";
+ pwr_led_activelow = "", "", "", "/gpios:8";
+ pwr_led_trigger = "", "", "", "/linux,default-trigger";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ phandle = <0x78>;
+
+ act {
+ label = "led0";
+ linux,default-trigger = "mmc0";
+ gpios = <0x10 0x1d 0x0>;
+ phandle = <0x2e>;
+ };
+
+ pwr {
+ label = "led1";
+ linux,default-trigger = "default-on";
+ gpios = <0x30 0x2 0x1>;
+ phandle = <0x2f>;
+ };
+ };
+
+ __symbols__ {
+ cpu_thermal = "/thermal-zones/cpu-thermal";
+ soc = "/soc";
+ dma = "/soc/dma@7e007000";
+ intc = "/soc/interrupt-controller@7e00b200";
+ watchdog = "/soc/watchdog@7e100000";
+ clocks = "/soc/cprman@7e101000";
+ random = "/soc/rng@7e104000";
+ mailbox = "/soc/mailbox@7e00b880";
+ gpio = "/soc/gpio@7e200000";
+ dpi_gpio0 = "/soc/gpio@7e200000/dpi_gpio0";
+ emmc_gpio22 = "/soc/gpio@7e200000/emmc_gpio22";
+ emmc_gpio34 = "/soc/gpio@7e200000/emmc_gpio34";
+ emmc_gpio48 = "/soc/gpio@7e200000/emmc_gpio48";
+ gpclk0_gpio4 = "/soc/gpio@7e200000/gpclk0_gpio4";
+ gpclk1_gpio5 = "/soc/gpio@7e200000/gpclk1_gpio5";
+ gpclk1_gpio42 = "/soc/gpio@7e200000/gpclk1_gpio42";
+ gpclk1_gpio44 = "/soc/gpio@7e200000/gpclk1_gpio44";
+ gpclk2_gpio6 = "/soc/gpio@7e200000/gpclk2_gpio6";
+ gpclk2_gpio43 = "/soc/gpio@7e200000/gpclk2_gpio43";
+ i2c0_gpio0 = "/soc/gpio@7e200000/i2c0_gpio0";
+ i2c0_gpio28 = "/soc/gpio@7e200000/i2c0_gpio28";
+ i2c0_gpio44 = "/soc/gpio@7e200000/i2c0_gpio44";
+ i2c1_gpio2 = "/soc/gpio@7e200000/i2c1_gpio2";
+ i2c1_gpio44 = "/soc/gpio@7e200000/i2c1_gpio44";
+ i2c_slave_gpio18 = "/soc/gpio@7e200000/i2c_slave_gpio18";
+ jtag_gpio4 = "/soc/gpio@7e200000/jtag_gpio4";
+ jtag_gpio22 = "/soc/gpio@7e200000/jtag_gpio22";
+ pcm_gpio18 = "/soc/gpio@7e200000/pcm_gpio18";
+ pcm_gpio28 = "/soc/gpio@7e200000/pcm_gpio28";
+ pwm0_gpio12 = "/soc/gpio@7e200000/pwm0_gpio12";
+ pwm0_gpio18 = "/soc/gpio@7e200000/pwm0_gpio18";
+ pwm0_gpio40 = "/soc/gpio@7e200000/pwm0_gpio40";
+ pwm1_gpio13 = "/soc/gpio@7e200000/pwm1_gpio13";
+ pwm1_gpio19 = "/soc/gpio@7e200000/pwm1_gpio19";
+ pwm1_gpio41 = "/soc/gpio@7e200000/pwm1_gpio41";
+ pwm1_gpio45 = "/soc/gpio@7e200000/pwm1_gpio45";
+ sdhost_pins = "/soc/gpio@7e200000/sdhost_gpio48";
+ sdhost_gpio48 = "/soc/gpio@7e200000/sdhost_gpio48";
+ spi0_gpio7 = "/soc/gpio@7e200000/spi0_gpio7";
+ spi0_gpio35 = "/soc/gpio@7e200000/spi0_gpio35";
+ spi1_gpio16 = "/soc/gpio@7e200000/spi1_gpio16";
+ spi2_gpio40 = "/soc/gpio@7e200000/spi2_gpio40";
+ uart0_gpio14 = "/soc/gpio@7e200000/uart0_gpio14";
+ uart0_ctsrts_gpio16 = "/soc/gpio@7e200000/uart0_ctsrts_gpio16";
+ uart0_ctsrts_gpio30 = "/soc/gpio@7e200000/uart0_ctsrts_gpio30";
+ uart0_gpio32 = "/soc/gpio@7e200000/uart0_gpio32";
+ uart0_gpio36 = "/soc/gpio@7e200000/uart0_gpio36";
+ uart0_ctsrts_gpio38 = "/soc/gpio@7e200000/uart0_ctsrts_gpio38";
+ uart1_gpio14 = "/soc/gpio@7e200000/uart1_gpio14";
+ uart1_ctsrts_gpio16 = "/soc/gpio@7e200000/uart1_ctsrts_gpio16";
+ uart1_gpio32 = "/soc/gpio@7e200000/uart1_gpio32";
+ uart1_ctsrts_gpio30 = "/soc/gpio@7e200000/uart1_ctsrts_gpio30";
+ uart1_gpio40 = "/soc/gpio@7e200000/uart1_gpio40";
+ uart1_ctsrts_gpio42 = "/soc/gpio@7e200000/uart1_ctsrts_gpio42";
+ dpi_18bit_gpio0 = "/soc/gpio@7e200000/dpi_18bit_gpio0";
+ spi0_pins = "/soc/gpio@7e200000/spi0_pins";
+ spi0_cs_pins = "/soc/gpio@7e200000/spi0_cs_pins";
+ i2c0_pins = "/soc/gpio@7e200000/i2c0";
+ i2c1_pins = "/soc/gpio@7e200000/i2c1";
+ i2s_pins = "/soc/gpio@7e200000/i2s";
+ sdio_pins = "/soc/gpio@7e200000/sdio_pins";
+ bt_pins = "/soc/gpio@7e200000/bt_pins";
+ uart0_pins = "/soc/gpio@7e200000/uart0_pins";
+ uart1_pins = "/soc/gpio@7e200000/uart1_pins";
+ audio_pins = "/soc/gpio@7e200000/audio_pins";
+ uart0 = "/soc/serial@7e201000";
+ sdhost = "/soc/mmc@7e202000";
+ i2s = "/soc/i2s@7e203000";
+ spi0 = "/soc/spi@7e204000";
+ spi = "/soc/spi@7e204000";
+ spidev0 = "/soc/spi@7e204000/spidev@0";
+ spidev1 = "/soc/spi@7e204000/spidev@1";
+ i2c0 = "/soc/i2c@7e205000";
+ pixelvalve0 = "/soc/pixelvalve@7e206000";
+ pixelvalve1 = "/soc/pixelvalve@7e207000";
+ dpi = "/soc/dpi@7e208000";
+ dsi0 = "/soc/dsi@7e209000";
+ thermal = "/soc/thermal@7e212000";
+ aux = "/soc/aux@0x7e215000";
+ uart1 = "/soc/serial@7e215040";
+ spi1 = "/soc/spi@7e215080";
+ spi2 = "/soc/spi@7e2150c0";
+ pwm = "/soc/pwm@7e20c000";
+ hvs = "/soc/hvs@7e400000";
+ dsi1 = "/soc/dsi@7e700000";
+ csi0 = "/soc/csi0@7e800000";
+ csi1 = "/soc/csi1@7e801000";
+ i2c1 = "/soc/i2c@7e804000";
+ i2c2 = "/soc/i2c@7e805000";
+ vec = "/soc/vec@7e806000";
+ pixelvalve2 = "/soc/pixelvalve@7e807000";
+ hdmi = "/soc/hdmi@7e902000";
+ usb = "/soc/usb@7e980000";
+ ethernet = "/soc/usb@7e980000/usb1@1/usb1_1@1/usbether@1";
+ v3d = "/soc/v3d@7ec00000";
+ vc4 = "/soc/gpu";
+ local_intc = "/soc/local_intc@40000000";
+ mmc = "/soc/mmc@7e300000";
+ firmwarekms = "/soc/firmwarekms@7e600000";
+ smi = "/soc/smi@7e600000";
+ axiperf = "/soc/axiperf";
+ firmware = "/soc/firmware";
+ power = "/soc/power";
+ fb = "/soc/fb";
+ vchiq = "/soc/vchiq";
+ vcsm = "/soc/vcsm";
+ audio = "/soc/audio";
+ sound = "/soc/sound";
+ expgpio = "/soc/expgpio";
+ clk_osc = "/clocks/clock@3";
+ clk_usb = "/clocks/clock@4";
+ usbphy = "/phy";
+ cpus = "/cpus";
+ cpu0 = "/cpus/cpu@0";
+ cpu1 = "/cpus/cpu@1";
+ cpu2 = "/cpus/cpu@2";
+ cpu3 = "/cpus/cpu@3";
+ vdd_5v0_reg = "/fixedregulator_5v0";
+ vdd_3v3_reg = "/fixedregulator_3v3";
+ leds = "/leds";
+ act_led = "/leds/act";
+ pwr_led = "/leds/pwr";
+ };
+};
diff --git a/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb b/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb
new file mode 100644
index 0000000000000000000000000000000000000000..14c78a9eead443adefd229f81ad0ace70c8e0ec7
GIT binary patch
literal 25354
zcmd5^eT-#ERll!$KDxod0Tx&gc6+90nE~c*zxTR(rU&`Bu6!;mj35Fd@aFY<Z@TZ!
z`{Lc#Uz^wtuEIYqf-wk06!`-}j3FV2L`@w3Fi`|Tkf?tk!MG|Kh>{S38eM<CQ+4Xr
z{dn)qE(@`edvDdLQ>V^3b?Q{zx>fhfC;s=_LC|_a5CpFZg13(GJcsMaxK83iSo{Fs
z=S^JiHcOM{S+U7^JeL_CHIw0HXEZt(#^+bV-k{y-hMU3WsMR~a+3M9dRxe5k;y(k|
z6W^ftOPAxN)usDbVCf!*a|AK+#d=tV>C?G%&892OZrn^d36g^QG(2Ctk_=iaNoN!{
zyV1o?y|!Lms}cc$^oaBF98R@Xt@=1m1kQbe)7)vt1EfsZ+wgp&h3`kzeM8<9C2f{_
zv!OlM>9>(G<&NU{cESZ>U{683DY)%k6O2}?7abF%wT!DH`Eh>?_3jMEVQbJIj|Sat
zXCwtS>y~TcQ@8gE{$6w3+HMcFfJ3=F9M+i#&Zuv)*ECyn^K|4tAo;y!+}#}Pn`$;T
zta4b-Q*r&0;A{=!0T9515@9~|`yR<p+aRxB^6`+Vr`Hk^Bmy7;X)ymcX5@cJ^5c3U
z<yQ;kKVo<o#*&|vlk`7k%bWVwGvz76CrtT?c0?M#@7DoC^Yz61Pv`PmIT`;@@_V8K
zN|4vVAJ53YDfw}oGHk%i^X30Mlb@B5{C!^Xcalw%zqFC9{}}SWw9@UgrFWTjSpe*>
zrOdTWM5V20^M50--PU&ePJ*2+eNEuw?aruYJ7cz;PXPB}!D;Tt!_MfMls4thApR}M
z^Z8prq88Qo=#XwiR}jqMs<gHTNvF@G)PEAs?`_oAt9SQDjh*IboV+;2wJe1X4En}<
zu>5c*v~Z<C-}49)2((M2E3l3EZ+huv#92S{p`Xg?Bai&gKL^KNebvHPCPG|%R%<Zm
z#{I3Z*Bn~4N?Dc{8LW#SE$TH$;@+^^2{(5PHsR#yG%nvi3T?oce><{Xb%@AIEmDLh
zFYD@w^JBny{Y`=ph=*WlS0cpgxGF`rBsfn-p6}h)Lm(1{KpND+mBV0&=#MMx24L?%
zf;_Wb_#_=ZX@`8$ukcA9%P0FFpY%z5(!cQu`Q-Ub`+Syt{=|&uvyo5!8Ymuv<!XRi
zjkh{)tGuo8w$9rH-Y)XC!P_O?YNm*ksY#)ll&VRwFxhU7I_<F8?V^@cp9hGOZ`JQF
z2f;6{dFcpowzahXY*#OIr~|(ZE`-fduQeWZ!??vPuN^*(BuNVlkIIK_oObys#F=S%
zlQv=8rlrl;=QSN6PFaN4@?l1B*@ixU>*25$?zP7Rla{d&T7sE}`1J1rOz5|U@EU!1
zrkWc*h*zX-5J^kv+(cY;ZtG%YOSl9F`mcNuarPyS%?y0944<r@{*QrA!uj-cRrxB?
z$8l+$5#rR9@Ln8V1+Un5fQT{-q+@xFm?pytW8Wd&=U5oqE<*gdxTL=F;abYGe`VXE
zhk>2Ils@|F=WZY!c`(+=pn7DTe{VoSS9xH+6CR4wfeG~!(GXJkt{g52;4`=r2HC~-
zNS8X}lX5T*q4KY|F-{)-6Hn%A-W2<;M8Kn7EA3(2ARARA5Lk8yGHMHyS!tpUu?e<6
z+na5?h>LS+_FMSUfaBPcaM9tBK6xg;^l7wL`ZD@4`Y`rg`Y!q{>dwkB$Fi)$riIs4
zq{&C6gE@jQT(2W3IG`i^-U{8kox=WebXN(=&^?XxGOjbY?!rY|JB!QbSLu=$+9m_}
z&0oGu>oz}?X>Eh$h@&#GS!%c_EOkKUSgx#YwZjX@7hP=)Tixqb(Uu71m1Fy|J$*V}
zx)LGpBCeE9P3W+01}#TAyfn?W%hRDyc{*#-dTBY*c>WAJm&)i^!L)wT;k%or%lLU=
zhE84NqRtq!9O-yAC^ngw>nDMe%4O)Rv5^pbIxq0jW&FGd`9cTNSJPUiGm-}SSf(#3
z-7-2aF3_nvdr~?a`#s-TD%VR2bk<y-P&(9ch|A~4vx7>6JWi)nE@M5W(S5m?&$Le`
zuji;h=hpb~+E4iTDUVJg={9#e()2Y^lH~zDOZ5E|q<x>|^QV0sd<xxrl<xiG=9bsn
zSmriMk20xEsh{*|sveZ)PZwxDHh;%DY(13-@s}yxVXNm$Pn=tkopSi}UY@6COipl=
zp4!|Uz`ZjqU+U*y;ppx4OkcqK(knw9Qh%0*Qu}=+^2P3kj)v<8;NP{cPb07YR~2ZO
zr4ubfKF-bH<JBGwWB-^Xdu2$2<E7Fp>(lolUuCg0=muRG(x9FCH1e{%2KiYUYaCKs
z8Pa&3moDSuwaCxWkfA{9C5^m4$lJ<&N+W6G1$AtCitT))bGvODdcRp?UY<5>LikID
zv9TMDUPeakgY38PUzs_J@?R$N>wuf3x$0zAn#;gBgX=C_W%GhOpRf05+V+&8$Cn@d
zrgYxq^UAnQS0cnO<5FJjNJKRXj_Q^6%68^B%Q5LZu6>HZ9Ggf7<&Y=@M=0C3_$
zpVFUn&S!Zl?U!%J(rS$pEJYY6<aD6)R0lr2yx)D}M0%@EcBNP5d-C*tHcOAQ;#D(Z
zWo2Cg-YHzuczaU`Eq{)oe5vjDwDRND&t++OdRujVP3e`{V4mKaeR|diZ?#Qn3zpYP
zg!o&sv^?Hwx74P2dT-6rdsJ<Zr*$Pu%j50V>?2R_=d<+4TV_37+u$7V^8PeW>up(D
z9&cu5OdTsd?XSL#<mtU#>G6H8wy_x-_v-oq+9@-S^vb(=Ntu77U*#C3{agFxwE0oq
z-uV8^`YPg^hjBka0)g^?zVNk(_!DsPJ<^vm??1^$N~@JLQgTvGb%v+ECL#XFe}9jV
zPoFQeIPXTB!Ph&}UYSy#_GI8F4H;B(G?+)4(`0&DN<%b5T<F=&Q#ih3ypeb3X>{05
zMmP9U<0*z^bPPC+_%bf_J7xYt{UXcU>bor8;ic})v8!2m<=kM(JCLix;#VTz(-wrD
z8FySO6Gz*43GqpOm^eP~K5g2Xqg`|CN*ghY{1P8Q+Faw_ds8JsCfh~m$fvO^9p&*H
zaPqz&Z_}I~laA0T`BcREslV*n)v#Nw)dH+`p7&y-xYucQymeRbfi>tQc3WN|7h&2b
zx&A`>$dq+J<cVB-(&m^48=pJNcED;v&>U_yxU2v;1M?xz+-h*<B>Mu>2y^%1#yIHA
zHQJqP&7JO;84Bwmu6>>`=zMN(aJ_jzBm}}hw-VvWv0HRwJ`dHa>8BIHBcEB_m<cAq
zwm#}$2}yQm2U8uu&K>NFi2JgW|3kp&m)O5Z5B_cL!O?y=-bVs~urmJ3WT&nuJN+ul
zG5wHvy7X@%&7k?8MBMX3l?dsxxI`z#&wf&lZIRUp5D7ydUGPSoRGB{G!Bl>IPlH`J
z`B@+J!1BCA4^YC$(*xRcZm%6D%}snS0}camDd*=T<?1ik1#zgG6KR=Bg!mFJ(>DsA
zFokweRtz*K!@#<&tP!H6ec<UHp31Mb51vZDF##;JC&}yUjpHHprhc_dZ)LVZ81<oJ
zFJ*zP&iy5x6a@KV7mSm3-bPLl2352>yHOQ!2GSsIVBm}i402XDUt%E6EV<cMUpbz<
zHA?X-j5ly;Te036(hRfe^?0AE?@9GuMIEeH>NcN&>(%r#uhd_(6Ck1t1NpOdav4#o
z)WOtGaGX}W$IDL2+MP18-N`TOWBTEs^6rnO=}Lt7X<Q=jFy8NUcbnbaj(p+2V84E|
zEd6`d52VPxO<38l0-H_Y<W$*DSlA?c2am#26L@7j>5h(BJo)xwc^ZObDNpPdq&JJF
zP2~x5V^I*l?*qob@<qD<qU5G}fUmqk(68cR85oEgFX=15t6O(QU!ObM8jL!D=o&eu
z40JTrwr9!FLV3|`J27%x%F4kxdA6;AXayzDR-f-98eO)+w2jFhVYB!|e&r_cw9mpP
zIbAFPPF<|nC)<-Wq2sx;!|j8hleC&cUo$2jbE~=UlHJDU!MGDhtlb{r+cIH@fd+%+
zuM#27d79{>d|QR!vd{WDx#(|fKo;p4y_{M?RCrgI_Hpmq)V%mk;1Q>6%%^T5<dHAo
zt+|um9wlXqHU~tMVIb|ijxCRunNR)ZdDQWWcx+F$jm}q@{ID%Ux}UQ7T2F*DZAbV`
z=bvu781Xnp`g&Xs!EeY(Av02bt{k4a93jn1>60G@pJ%aE3!9)v>6gT_<tEM-I1ksl
zBE&g&F|wHc?rldByu3{qS<2=Nr!L<Btq7OWSKa1i(Y^rvKGr^-kyq`g4SG3QGViL7
zMwXkP72)z_A?>^@3VXa|>7Xu=1?%$Shg(_yRqPW$L>UI<5q|h4)8{;x_R~93*gS2Y
z{X}7qWj+i(_<<W1hv|C|S6OHI-fI@Ovc1b~cHCe#V+;Wz$}pt7M@(MjO<}Yr(TRo4
z;$utk;TORNht&)p(yzQ7r`VH}#B{<4TIZF+p`>*zQ=dUTy!Vo+b`1SZ90Qg?hq~v`
z!)F~A>%P@7pytMa8a=;^0TKfZ2GW|PC(gM=uPuxpP?T)xBSQ!*Pk)*9XFL74)f97M
z{z=Gp<?sfv7J|bYON_8TFwfT)>rt56VQ681&z<cWT@#1pPvi1^g>4$4k=N-Y8BzcI
zeV{`by!NU@NN?j(xoaYKx}ldm+@jnN-^fj#%jD)bNP5(T%6+$m0scdm`-H8FI*SmG
zaaD!`9gc!Zr{5k9u!#(C2FvR_*KnzS>d3z;=AFUcIx1y~KB?@T;YI{<)S1@f)>nSi
z?+jWW^iulHunZo>K2+Yv^p14n@{dy9NwRQGBC_mu%(h>B@v-etY&#$#kHOjl`}kEP
zGi|5#jCrlYQ$MY9!AX5n?eTt;72eX<E$NN7`W{4|$>8xhM3ScKV9FEMN{Kg%r|ZBG
zp0?XP4jz}hg*28gjvYiq1_JY;B<SmXONbtWPrQMr<A-_54}5~u1Ae3&bTZHJQ`cFD
zt2#!UK1AMAS%<tknb#&)IpM%@>riZ0!YJ>9vi2J45|o3NtwDi?^P7BkAPxA>dA8Lv
zaDh+XH&-I0ySPMW{?=>27+Ah&V?dN#lW%nPK|r9Y!{90+6j{oGA2(O`bTxB~pzhQ*
z!SmeN!I;wmp-ElS=jpmG=*}O2rFzJhFB8bOuL~W+P*!B_A-{q$*j+9Kh|h5*0Bo(k
zcK*^j_W2?Z&N5s#q9NGyME*(B+o~@3KHU!HgCL`H@^po_KJwWfdR2B;+c0I$Bs24%
z6C@<_pxxG52qdNv$RqWB<?tqxrEQ`8$=8v>Xme$@rMeq{sMyQaaEBGJzM_qQCuSlr
ze-_OlaD--e&}w!Y7}Q#knSiGH%D)F(2)nhAn5+cB$sI}3^;@K-y&DSeEXzw}WL)?u
z9@h}OGsw@*t$>&XV1d3B6V35;C{6G9(!RlZ?(p!`Z}6LmE$jRO*H{UIJr~yJ!TX%Q
zu3q-ei8?2~V?N8$=Ho#dC(VZt$5ZOXvl1bG4wvZXT0H9QVJrOg9^V-_I%RB>?<kow
zW20dlYMBs)n2%uPgw0-MvQ$SjWa5E``S;_g^RrpD^-kaluZau^1s;pG3q+J*cr<*m
zJ+<wgpO$s+X$m9%p|`HgHaP@7+g9~l*1ogk9HG3(=^d{j|M`A{wSdC;8|W6g4~!E(
z{KgFwb8P^gGW*|W@$o$6gS!WMogR{+$08pdg2kZ@@&3yqZ0@X$5r9CM3U*}<AFeyw
z5=?_jeg6*9I<KKT5z@3D(bsUW*P-$dNSpm2W3x&-hnLq2>-ji}QgNiC_1uQI=_{Lv
znLH8By~AFtZiML>t32JZeyp_Fe}r~=982ovdQsLLr3mEB=sEaYggEyID2($P2GX=L
z%>NPMOKCb|3(5!E!}5_xgIj!AoA=L*sxEh18N5d$Gsk|ZD?P3`LFN=eW%)eHLUzHQ
zWXJ4}`R}>lPrg^EPgc3lC@+aS0y>qpmgB%_WEk~uT!u+0C-YN&@W$HuxU(NNFKVu9
zkHUDxHiIly|M6(dZbgC!l)JdDxtl>E4#LE97UcP>Ku~`>%^s`36S+G3LuG^Xi+$fi
zK>p*&1LwKqLHKB4LUG-UGOU9>_R*ZPBYH(>M5~OGhRo-#;d@j&lpKXqPgg7s@tD5J
zOaz;r`|coV`RRu%XTI;HD-jYX=kXrNG>YYC)ys0Wo|1Yq^XIvTpZ!}KKzH~N;<w{+
zdb3k$(&INM&WpqTU>NSVI`J+6uI&8ROfo}@{a*Ax#%>MIw~F7RedF52hYHQLd}nMM
zxbp5m^6FDblem2R3vN=!FfkJ?0&$(dWj2if9@g%rO)}Uz=D(9*s)itCaSqg2hs&Qh
zw`Y0G73RP1{PxD`g)r$2Nesc#uSAGbMLc7wAEj;Hkz;@%OK|CTg-`A4>tbS#4sD5n
zWzpy6zn_y6e(H$$3*`Tu#iPwdh;y!?^63Za$I651eijekK%KS@;o${74|OCE9xD&p
z?z4FKW?F~va2{!=2czD{%maDnHH(M;$ng+b9)u6^8>7zFPPaK8j2i2^#yUy&B(A_^
zVI~6)LlE=Ou1A(FvZm|7YhM$2`S*Hh7THYmD#Y8vRmQ{WZfbWkd9cVS5A`b_1zk<w
z8>DG~3q0&A4~@oP7ymiH#*L)W01$yR5RS0#X#7{a_^)~KkJvcIwj-Q#J*U-dZFfQ(
zx9)^V{6Oc0My*1JKL0(q?nuVXv3Itb@K4~nvjqMjz?X{fBcBEQR1qG04Diz>@SA`y
z7vV=Zr+Ru0PFcQ8Ix?z+*G8Rp?sWRC178;6e4R9B;Czepr{GZb`*5Af@j&?fxb7-}
z(@#D(2gjIk<i7wvD?X7;YARi?8m`%nnExI<?r^RRMy*bW8OlomlJ>#e;3#k`4dkF1
zd+}Js799A>qo*8ByR*5o#p03&9*)xAotwe~<$4&`^K$&Z1!XS*{`^v1y`U6&z7%Ta
z0{K>>{1~^7-h=1eoDd~1^vCm~uTS9{h>ASV0)CTlSo6;QdAqYP9FO9yEq^Q}UB26{
zl+fk-q=jebzK`%Jbj3g5ooz5W0H)ywZFl5Y4u-Ku<~o9eo0Lm`A0cu)ftlnjOf#qt
z9iv!7rP&%2jd1wYqaOvT?Ya*3aV)L)Fvvak1>h?TQNdNZ{6-`E4EJQ_;nS`W8G$go
zV;}u^+#l`;2L`6JIftapGWa~NAWhmrztKnzaJ;%}Js9!uj(PM?Rx&@FSjqirLgo5@
z@sAkvy~-EmzZ)e7@U85eWBjoHBZK$HqkkcM&|t8VWd1X=k~_LBy1Ns&Un#-O9h-Kz
zU!R6+jzT-!f18GDjxG!C5_tGt32y#4GHn95$L1&DnzJeEKoh#~amP+h$JJxS4*!lB
z_~LLZee!aC625m#n0%9$OVe@nD6sHy2k>86f{)K|{*hn7MH?P_!!%s)j3sg3F%8!o
zm32JaUyf@u?af0;cV`-|NB0bH-&KxVIA%-TQ5U~nf}cA+>vUoMUzD|dhii_-I{7|X
zLN|BR)!}|-3a(YL<Ka)saNY4zqd3Y&z5UfxTp4m4-M^iNYfl#`-G3~{wI{gJc`AAM
z_o=uX)lHuw?tf3iHAh92-{Z%p;!0N)T=b9QPc6YMIr{1F?|c;au%Y8&8GiQor{jBL
z8m>9k>2P0Gj%)RN!PnjK%jLNK5lo@G1b*LEf}1~9$+kWV+;}3ccT~(Au@m|%^9#39
z#vFZfJiUKn8TL1G{E<A7|KFaDD~eJ6e{UkL$G<tg=y)mXW7LmTyqg<R)-Oz;Uu$^u
zJ^hgXZ%izcm6i0rJrUQVpVj3;Wnvl9PtT8o{=$<c;(GM$Xhxkbqs-}&G9}0TM4y;5
zEYwTzvCFZVo>VeE0J>Rt(Ii~&h#mR39k{P9!R0uHY^j?#Z!E`=DJJP)4!I!z0hEb&
zI;YW7D#W1-*GlLl+2d_eC+3z5!xCKYIGW(WZ!GMW;F*5tj+r^!2Pfcq$HpA)drNS0
zN5cdc^UBBNzkomBfB%krR``WQi2Aet%%eUHeLsH%iS#rH+lY9-TcD$O=8b}QoF`BF
z&)_pb$Bf;X4Kwv>Zch*K{y^%>;pxU2)MM*g_%p#PZu-}J^G`stk+NP*H`6m8YYD-u
zfA-x59AoFjP2QxzcK#9kJ8|LjMjwSuwJPVAB)_<ERrAgJLUBVW^PdWRn>k8xBc<jW
zJt050;n30#e!zb-F8qV=U)<zH`m~3CGV=R}U^cv8h>AT>j_(*f6gEF8pGJ>Z%twF7
z{{s?p+y(Pa<L8(EgVEAkc*O8s*r39Ee3M$#_nsZ38LT{uW{x#svxmiFf138sOstbE
zK1J%+4F$zb2$s)9^Nv*90Kj~HFPQXSN__jMd^J-CkP%o8Yf6h|yh=X|6OOf!TmEk*
z)<_o586CP0qLy~)KWVv+^=83OKR6N}d@h=~V)5G^<XgNTWs2Y2P9pCmE3%-Km`D1Z
zi+Qie=DGO^)@l}Cx02m&h4qxhH*vLt3xx>e3+pM1R|LkJ`5L0|MhbUhCh^-TTwXd9
zKThHDB0xC&(_(+6d{JHVAIRr>YuMnq@ZVFm$-CuWs4I4L%E&_adkx&KETwBfi>*O#
z*c`_=5*o-)k%RQ-jzesZ!6x11CN_F^k|gBe<pit3Sf;jdb0DP}m?us=%YTS@TE?_8
ze-w&eQj%sX&_6L^i$cFW=mqv~fU?pS$QU2kv%#`%#@PmEM1f3SWUk3{jkkKhT}!xX
z%#~Z6U-|-Bu)~f7vuQy8ld9WBWP@A3Gp+`kgTc5t+Dd{U{!`3fo#OA#&4X~*Op<sP
zC!l<2psQl|Z)-9bB|&S@xppmX#ZV3iY(p9-4?=C>C#{e+v{8H!NtKzT(Xij_0dtwC
zMy0a;D@hRR<Hyv!W^&ytkp56PSWcVAHiuc%H3`!n0(C3FGJm3IE8#rX`!#d0Yyi@x
z!hlS$BzA45-x|k*zS)Q|+`*Z3Q;XqT&b8}l_7FeBjfdNDJHX^P?Ce4*;oe|$y*ZMN
z1t2Pa{4^ys1&cACG$6FmnaRf=WW&9<J>E7o`^)l{7hPnB8Ipe3ZpK!=RuWPoF&Zdv
zKV8wb%)9RrHa*xGV+mDTBiqQ9Ce2~1uiwj)Ae%-*kJ*qo31jiapN25*CV!;SZjPH_
zx5<C^w%e^>d)T%d!u`;24s6~1K|dT}>3Ww3vyGgt1=)a72e<lI$|`X7%aK(Oc`;T*
z&QOQ3jAnPQd60x?(;j-kpdEDjtSz)DOdR7@r!hXj@jov6jyl~Aepw!}>wBN}*h*fq
z7x%+n+!_sb2l#_P`UQ~MFN3E{;50`y9PYLIA*~~DNfSda_TWeXjIU%3ekE(r{m=)n
z=hqwY_5NUQZyO%0*T#_o^f)fsZNd?;al|`hQuQ>IwB=KtST;OQLq71}{cFGk9;gmq
zbC@unZRFL)nIu1eH)v7;d~E|f%FmKq0zf#D?qJVB^fL%taEh*p6kQ>T-feDnx<UDu
z542Q6eO$WW>@O#~IF^fD9LvF(<z7jc7x{IQV-k49^|G+2C@EcR^%7W36}7Yf8GkLx
zz&f1+qcq}%Zas|}aCRlqEg!B0E{c^zZ>3P9r~rM>{faJ)dvLtk18$coR=xP8G>&yN
zhqJbBM<Mejo?R2;cqF1-l%YwYSfJvtBylWiaCDM5DmE{!)Cx9bn}oN50OSG;s}^Y?
ztnhe=GVBdOuyva%@{25_U=S?141%rCAXttw2(W?tGKMHY1`CPlB7`)xfTf{r%>D!@
zT^7)nej}M+85Sk#y^@1Cyb?wVd7_2fI|N$P#qpbKxB|Q%NizpL*e8eT_(l})wI|@Y
zk`%ul$k7Fz2?X4I&K=+BjNXl&+~ms*wPunm`~KV<RVSqQ*-C>uqxj_f0~hC(GMB^+
iEDU#Qyw!PI4R+gYZk=dwZooKZbP~5d1ZF7CA^1PO>8mpU
literal 0
HcmV?d00001
diff --git a/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts b/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts
new file mode 100644
index 000000000000..887eb09692b6
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts
@@ -0,0 +1,1259 @@
+/dts-v1/;
+
+/*
+ * Raspberry Pi 3 Model B DTS (Device Tree Source), for UEFI firmware.
+ *
+ * This source is the mostly identical to the decompiled version of the
+ * official DTB (Device Tree Binary), as found at:
+ * https://github.com/raspberrypi/firmware/tree/master/boot
+ *
+ * Only the following changes were applied:
+ * - Two fixes for USB keyboard support under the usb@7e980000 section:
+ * compatible = "brcm,bcm2708-usb"; -> compatible = "brcm,bcm2835-usb";
+ * interrupts = <0x2 0x0 0x1 0x9>; -> interrupts = <0x1 0x9>;
+ * - A 'psci' section was added, as it is provided by the ATF
+ * - The 'enable-method' for CPUs was swicthed to "psci" instead of "spin-table"
+ */
+
+/memreserve/ 0x0000000000000000 0x0000000000001000;
+/ {
+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B";
+ interrupt-parent = <0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ aliases {
+ serial0 = "/soc/serial@7e215040";
+ serial1 = "/soc/serial@7e201000";
+ audio = "/soc/audio";
+ aux = "/soc/aux@0x7e215000";
+ sound = "/soc/sound";
+ soc = "/soc";
+ dma = "/soc/dma@7e007000";
+ intc = "/soc/interrupt-controller@7e00b200";
+ watchdog = "/soc/watchdog@7e100000";
+ random = "/soc/rng@7e104000";
+ mailbox = "/soc/mailbox@7e00b880";
+ gpio = "/soc/gpio@7e200000";
+ uart0 = "/soc/serial@7e201000";
+ sdhost = "/soc/mmc@7e202000";
+ mmc0 = "/soc/mmc@7e202000";
+ i2s = "/soc/i2s@7e203000";
+ spi0 = "/soc/spi@7e204000";
+ i2c0 = "/soc/i2c@7e205000";
+ uart1 = "/soc/serial@7e215040";
+ spi1 = "/soc/spi@7e215080";
+ spi2 = "/soc/spi@7e2150c0";
+ mmc = "/soc/mmc@7e300000";
+ mmc1 = "/soc/mmc@7e300000";
+ i2c1 = "/soc/i2c@7e804000";
+ i2c2 = "/soc/i2c@7e805000";
+ usb = "/soc/usb@7e980000";
+ leds = "/leds";
+ fb = "/soc/fb";
+ vchiq = "/soc/vchiq";
+ thermal = "/soc/thermal@7e212000";
+ axiperf = "/soc/axiperf";
+ ethernet0 = "/soc/usb@7e980000/usb1@1/usbether@1";
+ };
+
+ chosen {
+ bootargs = "8250.nr_uarts=1";
+ };
+
+ thermal-zones {
+
+ cpu-thermal {
+ polling-delay-passive = <0x0>;
+ polling-delay = <0x3e8>;
+ thermal-sensors = <0x2>;
+ coefficients = <0xfffffde6 0x64960>;
+ phandle = <0x31>;
+
+ cooling-maps {
+ };
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges = <0x7e000000 0x3f000000 0x1000000 0x40000000 0x40000000 0x1000>;
+ dma-ranges = <0xc0000000 0x0 0x3f000000>;
+ phandle = <0x32>;
+
+ dma@7e007000 {
+ compatible = "brcm,bcm2835-dma";
+ reg = <0x7e007000 0xf00>;
+ interrupts = <0x1 0x10 0x1 0x11 0x1 0x12 0x1 0x13 0x1 0x14 0x1 0x15 0x1 0x16 0x1 0x17 0x1 0x18 0x1 0x19 0x1 0x1a 0x1 0x1b 0x1 0x1b 0x1 0x1b 0x1 0x1b 0x1 0x1c>;
+ interrupt-names = "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7", "dma8", "dma9", "dma10", "dma11", "dma12", "dma13", "dma14", "dma-shared-all";
+ #dma-cells = <0x1>;
+ brcm,dma-channel-mask = <0x7f34>;
+ phandle = <0xb>;
+ };
+
+ interrupt-controller@7e00b200 {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ interrupt-parent = <0x3>;
+ interrupts = <0x8>;
+ phandle = <0x1>;
+ };
+
+ watchdog@7e100000 {
+ compatible = "brcm,bcm2835-pm-wdt";
+ reg = <0x7e100000 0x28>;
+ phandle = <0x25>;
+ };
+
+ cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <0x1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <0x4 0x5 0x0 0x5 0x1 0x5 0x2 0x6 0x0 0x6 0x1 0x6 0x2>;
+ firmware = <0x7>;
+ phandle = <0x8>;
+ };
+
+ rng@7e104000 {
+ compatible = "brcm,bcm2835-rng";
+ reg = <0x7e104000 0x10>;
+ interrupts = <0x2 0x1d>;
+ phandle = <0x26>;
+ };
+
+ mailbox@7e00b880 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7e00b880 0x40>;
+ interrupts = <0x0 0x1>;
+ #mbox-cells = <0x0>;
+ phandle = <0x1b>;
+ };
+
+ gpio@7e200000 {
+ compatible = "brcm,bcm2835-gpio";
+ reg = <0x7e200000 0xb4>;
+ interrupts = <0x2 0x11 0x2 0x12>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ phandle = <0x10>;
+
+ dpi_gpio0 {
+ brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b>;
+ brcm,function = <0x6>;
+ phandle = <0x33>;
+ };
+
+ emmc_gpio22 {
+ brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>;
+ brcm,function = <0x7>;
+ phandle = <0x34>;
+ };
+
+ emmc_gpio34 {
+ brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>;
+ brcm,function = <0x7>;
+ brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>;
+ phandle = <0x35>;
+ };
+
+ emmc_gpio48 {
+ brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>;
+ brcm,function = <0x7>;
+ phandle = <0x36>;
+ };
+
+ gpclk0_gpio4 {
+ brcm,pins = <0x4>;
+ brcm,function = <0x4>;
+ phandle = <0x37>;
+ };
+
+ gpclk1_gpio5 {
+ brcm,pins = <0x5>;
+ brcm,function = <0x4>;
+ phandle = <0x38>;
+ };
+
+ gpclk1_gpio42 {
+ brcm,pins = <0x2a>;
+ brcm,function = <0x4>;
+ phandle = <0x39>;
+ };
+
+ gpclk1_gpio44 {
+ brcm,pins = <0x2c>;
+ brcm,function = <0x4>;
+ phandle = <0x3a>;
+ };
+
+ gpclk2_gpio6 {
+ brcm,pins = <0x6>;
+ brcm,function = <0x4>;
+ phandle = <0x3b>;
+ };
+
+ gpclk2_gpio43 {
+ brcm,pins = <0x2b>;
+ brcm,function = <0x4>;
+ phandle = <0x3c>;
+ };
+
+ i2c0_gpio0 {
+ brcm,pins = <0x0 0x1>;
+ brcm,function = <0x4>;
+ phandle = <0x3d>;
+ };
+
+ i2c0_gpio28 {
+ brcm,pins = <0x1c 0x1d>;
+ brcm,function = <0x4>;
+ phandle = <0x3e>;
+ };
+
+ i2c0_gpio44 {
+ brcm,pins = <0x2c 0x2d>;
+ brcm,function = <0x5>;
+ phandle = <0x3f>;
+ };
+
+ i2c1_gpio2 {
+ brcm,pins = <0x2 0x3>;
+ brcm,function = <0x4>;
+ phandle = <0x40>;
+ };
+
+ i2c1_gpio44 {
+ brcm,pins = <0x2c 0x2d>;
+ brcm,function = <0x6>;
+ phandle = <0x41>;
+ };
+
+ i2c_slave_gpio18 {
+ brcm,pins = <0x12 0x13 0x14 0x15>;
+ brcm,function = <0x7>;
+ phandle = <0x42>;
+ };
+
+ jtag_gpio4 {
+ brcm,pins = <0x4 0x5 0x6 0xc 0xd>;
+ brcm,function = <0x2>;
+ phandle = <0x43>;
+ };
+
+ jtag_gpio22 {
+ brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>;
+ brcm,function = <0x3>;
+ phandle = <0x44>;
+ };
+
+ pcm_gpio18 {
+ brcm,pins = <0x12 0x13 0x14 0x15>;
+ brcm,function = <0x4>;
+ phandle = <0x45>;
+ };
+
+ pcm_gpio28 {
+ brcm,pins = <0x1c 0x1d 0x1e 0x1f>;
+ brcm,function = <0x6>;
+ phandle = <0x46>;
+ };
+
+ pwm0_gpio12 {
+ brcm,pins = <0xc>;
+ brcm,function = <0x4>;
+ phandle = <0x47>;
+ };
+
+ pwm0_gpio18 {
+ brcm,pins = <0x12>;
+ brcm,function = <0x2>;
+ phandle = <0x48>;
+ };
+
+ pwm0_gpio40 {
+ brcm,pins = <0x28>;
+ brcm,function = <0x4>;
+ phandle = <0x49>;
+ };
+
+ pwm1_gpio13 {
+ brcm,pins = <0xd>;
+ brcm,function = <0x4>;
+ phandle = <0x4a>;
+ };
+
+ pwm1_gpio19 {
+ brcm,pins = <0x13>;
+ brcm,function = <0x2>;
+ phandle = <0x4b>;
+ };
+
+ pwm1_gpio41 {
+ brcm,pins = <0x29>;
+ brcm,function = <0x4>;
+ phandle = <0x4c>;
+ };
+
+ pwm1_gpio45 {
+ brcm,pins = <0x2d>;
+ brcm,function = <0x4>;
+ phandle = <0x4d>;
+ };
+
+ sdhost_gpio48 {
+ brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>;
+ brcm,function = <0x4>;
+ phandle = <0xc>;
+ };
+
+ spi0_gpio7 {
+ brcm,pins = <0x7 0x8 0x9 0xa 0xb>;
+ brcm,function = <0x4>;
+ phandle = <0x4e>;
+ };
+
+ spi0_gpio35 {
+ brcm,pins = <0x23 0x24 0x25 0x26 0x27>;
+ brcm,function = <0x4>;
+ phandle = <0x4f>;
+ };
+
+ spi1_gpio16 {
+ brcm,pins = <0x10 0x11 0x12 0x13 0x14 0x15>;
+ brcm,function = <0x3>;
+ phandle = <0x50>;
+ };
+
+ spi2_gpio40 {
+ brcm,pins = <0x28 0x29 0x2a 0x2b 0x2c 0x2d>;
+ brcm,function = <0x3>;
+ phandle = <0x51>;
+ };
+
+ uart0_gpio14 {
+ brcm,pins = <0xe 0xf>;
+ brcm,function = <0x4>;
+ phandle = <0x52>;
+ };
+
+ uart0_ctsrts_gpio16 {
+ brcm,pins = <0x10 0x11>;
+ brcm,function = <0x7>;
+ phandle = <0x53>;
+ };
+
+ uart0_ctsrts_gpio30 {
+ brcm,pins = <0x1e 0x1f>;
+ brcm,function = <0x7>;
+ phandle = <0x54>;
+ };
+
+ uart0_gpio32 {
+ brcm,pins = <0x20 0x21>;
+ brcm,function = <0x7>;
+ phandle = <0x55>;
+ };
+
+ uart0_gpio36 {
+ brcm,pins = <0x24 0x25>;
+ brcm,function = <0x6>;
+ phandle = <0x56>;
+ };
+
+ uart0_ctsrts_gpio38 {
+ brcm,pins = <0x26 0x27>;
+ brcm,function = <0x6>;
+ phandle = <0x57>;
+ };
+
+ uart1_gpio14 {
+ brcm,pins = <0xe 0xf>;
+ brcm,function = <0x2>;
+ phandle = <0x58>;
+ };
+
+ uart1_ctsrts_gpio16 {
+ brcm,pins = <0x10 0x11>;
+ brcm,function = <0x2>;
+ phandle = <0x59>;
+ };
+
+ uart1_gpio32 {
+ brcm,pins = <0x20 0x21>;
+ brcm,function = <0x2>;
+ phandle = <0x5a>;
+ };
+
+ uart1_ctsrts_gpio30 {
+ brcm,pins = <0x1e 0x1f>;
+ brcm,function = <0x2>;
+ phandle = <0x5b>;
+ };
+
+ uart1_gpio40 {
+ brcm,pins = <0x28 0x29>;
+ brcm,function = <0x2>;
+ phandle = <0x5c>;
+ };
+
+ uart1_ctsrts_gpio42 {
+ brcm,pins = <0x2a 0x2b>;
+ brcm,function = <0x2>;
+ phandle = <0x5d>;
+ };
+
+ dpi_18bit_gpio0 {
+ brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13 0x14 0x15>;
+ brcm,function = <0x6>;
+ phandle = <0x5e>;
+ };
+
+ spi0_pins {
+ brcm,pins = <0x9 0xa 0xb>;
+ brcm,function = <0x4>;
+ phandle = <0xe>;
+ };
+
+ spi0_cs_pins {
+ brcm,pins = <0x8 0x7>;
+ brcm,function = <0x1>;
+ phandle = <0xf>;
+ };
+
+ i2c0 {
+ brcm,pins = <0x0 0x1>;
+ brcm,function = <0x4>;
+ phandle = <0x11>;
+ };
+
+ i2c1 {
+ brcm,pins = <0x2 0x3>;
+ brcm,function = <0x4>;
+ phandle = <0x15>;
+ };
+
+ i2s {
+ brcm,pins = <0x12 0x13 0x14 0x15>;
+ brcm,function = <0x4>;
+ phandle = <0xd>;
+ };
+
+ sdio_pins {
+ brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>;
+ brcm,function = <0x7>;
+ brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>;
+ phandle = <0x1a>;
+ };
+
+ bt_pins {
+ brcm,pins = <0x2b>;
+ brcm,function = <0x4>;
+ brcm,pull = <0x0>;
+ phandle = <0xa>;
+ };
+
+ uart0_pins {
+ brcm,pins = <0x20 0x21>;
+ brcm,function = <0x7>;
+ brcm,pull = <0x0 0x2>;
+ phandle = <0x9>;
+ };
+
+ uart1_pins {
+ brcm,pins;
+ brcm,function;
+ brcm,pull;
+ phandle = <0x13>;
+ };
+
+ audio_pins {
+ brcm,pins = <0x28 0x29>;
+ brcm,function = <0x4>;
+ phandle = <0x1c>;
+ };
+ };
+
+ serial@7e201000 {
+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ reg = <0x7e201000 0x1000>;
+ interrupts = <0x2 0x19>;
+ clocks = <0x8 0x13 0x8 0x14>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x241011>;
+ cts-event-workaround;
+ pinctrl-names = "default";
+ pinctrl-0 = <0x9 0xa>;
+ status = "okay";
+ phandle = <0x1e>;
+ };
+
+ mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <0x2 0x18>;
+ clocks = <0x8 0x14>;
+ dmas = <0xb 0xd>;
+ dma-names = "rx-tx";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <0xc>;
+ bus-width = <0x4>;
+ brcm,overclock-50 = <0x0>;
+ brcm,pio-limit = <0x1>;
+ phandle = <0x27>;
+ };
+
+ i2s@7e203000 {
+ compatible = "brcm,bcm2835-i2s";
+ reg = <0x7e203000 0x24>;
+ clocks = <0x8 0x1f>;
+ dmas = <0xb 0x2 0xb 0x3>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ #sound-dai-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <0xd>;
+ phandle = <0x20>;
+ };
+
+ spi@7e204000 {
+ compatible = "brcm,bcm2835-spi";
+ reg = <0x7e204000 0x1000>;
+ interrupts = <0x2 0x16>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ dmas = <0xb 0x6 0xb 0x7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <0xe 0xf>;
+ cs-gpios = <0x10 0x8 0x1 0x10 0x7 0x1>;
+ phandle = <0x21>;
+
+ spidev@0 {
+ compatible = "spidev";
+ reg = <0x0>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ spi-max-frequency = <0x7735940>;
+ phandle = <0x5f>;
+ };
+
+ spidev@1 {
+ compatible = "spidev";
+ reg = <0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ spi-max-frequency = <0x7735940>;
+ phandle = <0x60>;
+ };
+ };
+
+ i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <0x2 0x15>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x11>;
+ clock-frequency = <0x186a0>;
+ phandle = <0x22>;
+ };
+
+ pixelvalve@7e206000 {
+ compatible = "brcm,bcm2835-pixelvalve0";
+ reg = <0x7e206000 0x100>;
+ interrupts = <0x2 0xd>;
+ status = "disabled";
+ phandle = <0x61>;
+ };
+
+ pixelvalve@7e207000 {
+ compatible = "brcm,bcm2835-pixelvalve1";
+ reg = <0x7e207000 0x100>;
+ interrupts = <0x2 0xe>;
+ status = "disabled";
+ phandle = <0x62>;
+ };
+
+ dpi@7e208000 {
+ compatible = "brcm,bcm2835-dpi";
+ reg = <0x7e208000 0x8c>;
+ clocks = <0x8 0x14 0x8 0x2c>;
+ clock-names = "core", "pixel";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ phandle = <0x63>;
+ };
+
+ dsi@7e209000 {
+ compatible = "brcm,bcm2835-dsi0";
+ reg = <0x7e209000 0x78>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ clocks = <0x8 0x20 0x8 0x2f 0x8 0x31>;
+ clock-names = "phy", "escape", "pixel";
+ clock-output-names = "dsi0_byte", "dsi0_ddr2", "dsi0_ddr";
+ phandle = <0x5>;
+ };
+
+ thermal@7e212000 {
+ compatible = "brcm,bcm2837-thermal";
+ reg = <0x7e212000 0x8>;
+ clocks = <0x8 0x1b>;
+ #thermal-sensor-cells = <0x0>;
+ status = "okay";
+ phandle = <0x2>;
+ };
+
+ aux@0x7e215000 {
+ compatible = "brcm,bcm2835-aux";
+ #clock-cells = <0x1>;
+ reg = <0x7e215000 0x8>;
+ clocks = <0x8 0x14>;
+ interrupts = <0x1 0x1d>;
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+ phandle = <0x12>;
+ };
+
+ serial@7e215040 {
+ compatible = "brcm,bcm2835-aux-uart";
+ reg = <0x7e215040 0x40>;
+ interrupts = <0x0>;
+ clocks = <0x12 0x0>;
+ status = "okay";
+ interrupt-parent = <0x12>;
+ pinctrl-names = "default";
+ pinctrl-0 = <0x13>;
+ phandle = <0x1f>;
+ };
+
+ spi@7e215080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>;
+ interrupts = <0x1>;
+ clocks = <0x12 0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ interrupt-parent = <0x12>;
+ phandle = <0x64>;
+ };
+
+ spi@7e2150c0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150c0 0x40>;
+ interrupts = <0x2>;
+ clocks = <0x12 0x2>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ interrupt-parent = <0x12>;
+ phandle = <0x65>;
+ };
+
+ pwm@7e20c000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x7e20c000 0x28>;
+ clocks = <0x8 0x1e>;
+ assigned-clocks = <0x8 0x1e>;
+ assigned-clock-rates = <0x989680>;
+ #pwm-cells = <0x2>;
+ status = "disabled";
+ phandle = <0x66>;
+ };
+
+ hvs@7e400000 {
+ compatible = "brcm,bcm2835-hvs";
+ reg = <0x7e400000 0x6000>;
+ interrupts = <0x2 0x1>;
+ status = "disabled";
+ phandle = <0x67>;
+ };
+
+ dsi@7e700000 {
+ compatible = "brcm,bcm2835-dsi1";
+ reg = <0x7e700000 0x8c>;
+ interrupts = <0x2 0xc>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ clocks = <0x8 0x23 0x8 0x30 0x8 0x32>;
+ clock-names = "phy", "escape", "pixel";
+ clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
+ status = "disabled";
+ phandle = <0x6>;
+ };
+
+ csi0@7e800000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e800000 0x800 0x7e802000 0x4>;
+ interrupts = <0x2 0x6>;
+ clocks = <0x8 0x2d>;
+ clock-names = "lp";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ status = "disabled";
+ power-domains = <0x14 0xc>;
+ phandle = <0x68>;
+ };
+
+ csi1@7e801000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e801000 0x800 0x7e802004 0x4>;
+ interrupts = <0x2 0x7>;
+ clocks = <0x8 0x2e>;
+ clock-names = "lp";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ #clock-cells = <0x1>;
+ status = "disabled";
+ power-domains = <0x14 0xd>;
+ phandle = <0x69>;
+
+ port {
+
+ endpoint {
+ data-lanes = <0x1 0x2>;
+ };
+ };
+ };
+
+ i2c@7e804000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e804000 0x1000>;
+ interrupts = <0x2 0x15>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x15>;
+ clock-frequency = <0x186a0>;
+ phandle = <0x23>;
+ };
+
+ i2c@7e805000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e805000 0x1000>;
+ interrupts = <0x2 0x15>;
+ clocks = <0x8 0x14>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ clock-frequency = <0x186a0>;
+ phandle = <0x16>;
+ };
+
+ vec@7e806000 {
+ compatible = "brcm,bcm2835-vec";
+ reg = <0x7e806000 0x1000>;
+ clocks = <0x8 0x18>;
+ interrupts = <0x2 0x1b>;
+ status = "disabled";
+ phandle = <0x6a>;
+ };
+
+ pixelvalve@7e807000 {
+ compatible = "brcm,bcm2835-pixelvalve2";
+ reg = <0x7e807000 0x100>;
+ interrupts = <0x2 0xa>;
+ status = "disabled";
+ phandle = <0x6b>;
+ };
+
+ hdmi@7e902000 {
+ compatible = "brcm,bcm2835-hdmi";
+ reg = <0x7e902000 0x600 0x7e808000 0x100>;
+ interrupts = <0x2 0x8 0x2 0x9>;
+ ddc = <0x16>;
+ clocks = <0x8 0x10 0x8 0x19>;
+ clock-names = "pixel", "hdmi";
+ dmas = <0xb 0x11>;
+ dma-names = "audio-rx";
+ status = "disabled";
+ power-domains = <0x14 0x5>;
+ hpd-gpios = <0x17 0x4 0x1>;
+ phandle = <0x6c>;
+ };
+
+ usb@7e980000 {
+ compatible = "brcm,bcm2835-usb";
+ reg = <0x7e980000 0x10000 0x7e006000 0x1000>;
+ interrupts = <0x1 0x9>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <0x18>;
+ clock-names = "otg";
+ phys = <0x19>;
+ phy-names = "usb2-phy";
+ power-domains = <0x14 0x6>;
+ phandle = <0x6d>;
+
+ usb1@1 {
+ compatible = "usb424,9514";
+ reg = <0x1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ usbether@1 {
+ compatible = "usb424,ec00";
+ reg = <0x1>;
+ phandle = <0x6e>;
+ };
+ };
+ };
+
+ v3d@7ec00000 {
+ compatible = "brcm,vc4-v3d";
+ reg = <0x7ec00000 0x1000>;
+ interrupts = <0x1 0xa>;
+ power-domains = <0x14 0xa>;
+ status = "disabled";
+ phandle = <0x6f>;
+ };
+
+ gpu {
+ compatible = "brcm,bcm2835-vc4";
+ status = "disabled";
+ phandle = <0x70>;
+ };
+
+ local_intc@40000000 {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+ interrupt-parent = <0x3>;
+ phandle = <0x3>;
+ };
+
+ mmc@7e300000 {
+ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
+ reg = <0x7e300000 0x100>;
+ interrupts = <0x2 0x1e>;
+ clocks = <0x8 0x1c>;
+ dmas = <0xb 0xb>;
+ dma-names = "rx-tx";
+ brcm,overclock-50 = <0x0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x1a>;
+ non-removable;
+ bus-width = <0x4>;
+ phandle = <0x28>;
+ };
+
+ firmwarekms@7e600000 {
+ compatible = "raspberrypi,rpi-firmware-kms";
+ reg = <0x7e600000 0x100>;
+ interrupts = <0x2 0x10>;
+ brcm,firmware = <0x7>;
+ status = "disabled";
+ phandle = <0x71>;
+ };
+
+ smi@7e600000 {
+ compatible = "brcm,bcm2835-smi";
+ reg = <0x7e600000 0x100>;
+ interrupts = <0x2 0x10>;
+ clocks = <0x8 0x2a>;
+ assigned-clocks = <0x8 0x2a>;
+ assigned-clock-rates = <0x7735940>;
+ dmas = <0xb 0x4>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ phandle = <0x72>;
+ };
+
+ axiperf {
+ compatible = "brcm,bcm2835-axiperf";
+ reg = <0x7e009800 0x100 0x7ee08000 0x100>;
+ firmware = <0x7>;
+ status = "disabled";
+ phandle = <0x29>;
+ };
+
+ gpiomem {
+ compatible = "brcm,bcm2835-gpiomem";
+ reg = <0x7e200000 0x1000>;
+ };
+
+ firmware {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <0x1b>;
+ phandle = <0x7>;
+ };
+
+ power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <0x7>;
+ #power-domain-cells = <0x1>;
+ phandle = <0x14>;
+ };
+
+ fb {
+ compatible = "brcm,bcm2708-fb";
+ firmware = <0x7>;
+ status = "okay";
+ phandle = <0x73>;
+ };
+
+ vchiq {
+ compatible = "brcm,bcm2835-vchiq";
+ reg = <0x7e00b840 0xf>;
+ interrupts = <0x0 0x2>;
+ cache-line-size = <0x20>;
+ firmware = <0x7>;
+ phandle = <0x1d>;
+ };
+
+ vcsm {
+ compatible = "raspberrypi,bcm2835-vcsm";
+ firmware = <0x7>;
+ status = "okay";
+ phandle = <0x74>;
+ };
+
+ audio {
+ compatible = "brcm,bcm2835-audio";
+ brcm,pwm-channels = <0x8>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <0x1c>;
+ phandle = <0x24>;
+ };
+
+ sound {
+ status = "disabled";
+ phandle = <0x75>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupt-parent = <0x3>;
+ interrupts = <0x9>;
+ };
+
+ virtgpio {
+ compatible = "brcm,bcm2835-virtgpio";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ firmware = <0x7>;
+ status = "okay";
+ phandle = <0x30>;
+ };
+
+ expgpio {
+ compatible = "brcm,bcm2835-expgpio";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ firmware = <0x7>;
+ status = "okay";
+ phandle = <0x17>;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ clock@3 {
+ compatible = "fixed-clock";
+ reg = <0x3>;
+ #clock-cells = <0x0>;
+ clock-output-names = "osc";
+ clock-frequency = <0x124f800>;
+ phandle = <0x4>;
+ };
+
+ clock@4 {
+ compatible = "fixed-clock";
+ reg = <0x4>;
+ #clock-cells = <0x0>;
+ clock-output-names = "otg";
+ clock-frequency = <0x1c9c3800>;
+ phandle = <0x18>;
+ };
+ };
+
+ phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0x0>;
+ phandle = <0x19>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <0x3>;
+ interrupts = <0x0 0x1 0x3 0x2>;
+ always-on;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ enable-method = "brcm,bcm2836-smp";
+ phandle = <0x76>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xd8>;
+ phandle = <0x2a>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xe0>;
+ phandle = <0x2b>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xe8>;
+ phandle = <0x2c>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ cpu-release-addr = <0x0 0xf0>;
+ phandle = <0x2d>;
+ };
+ };
+
+ fixedregulator_5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <0x4c4b40>;
+ regulator-max-microvolt = <0x4c4b40>;
+ regulator-always-on;
+ phandle = <0x77>;
+ };
+
+ fixedregulator_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <0x325aa0>;
+ regulator-max-microvolt = <0x325aa0>;
+ regulator-always-on;
+ phandle = <0x78>;
+ };
+
+ __overrides__ {
+ cam0-pwdn-ctrl;
+ cam0-pwdn;
+ cam0-led-ctrl;
+ cam0-led;
+ cache_line_size = [00 00 00 1d 63 61 63 68 65 2d 6c 69 6e 65 2d 73 69 7a 65 3a 30 00];
+ uart0 = [00 00 00 1e 73 74 61 74 75 73 00];
+ uart1 = [00 00 00 1f 73 74 61 74 75 73 00];
+ i2s = "", "", "", " status";
+ spi = "", "", "", "!status";
+ i2c0 = "", "", "", "\"status";
+ i2c1 = "", "", "", "#status";
+ i2c2_iknowwhatimdoing = [00 00 00 16 73 74 61 74 75 73 00];
+ i2c0_baudrate = "", "", "", "\"clock-frequency:0";
+ i2c1_baudrate = "", "", "", "#clock-frequency:0";
+ i2c2_baudrate = [00 00 00 16 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
+ audio = "", "", "", "$status";
+ watchdog = "", "", "", "%status";
+ random = "", "", "", "&status";
+ sd_overclock = "", "", "", "'brcm,overclock-50:0";
+ sd_force_pio = "", "", "", "'brcm,force-pio?";
+ sd_pio_limit = "", "", "", "'brcm,pio-limit:0";
+ sd_debug = "", "", "", "'brcm,debug";
+ sdio_overclock = "", "", "", "(brcm,overclock-50:0";
+ axiperf = "", "", "", ")status";
+ arm_freq = "", "", "", "*clock-frequency:0", "", "", "", "+clock-frequency:0", "", "", "", ",clock-frequency:0", "", "", "", "-clock-frequency:0";
+ act_led_gpio = "", "", "", ".gpios:4";
+ act_led_activelow = "", "", "", ".gpios:8";
+ act_led_trigger = "", "", "", ".linux,default-trigger";
+ pwr_led_gpio = "", "", "", "/gpios:4";
+ pwr_led_activelow = "", "", "", "/gpios:8";
+ pwr_led_trigger = "", "", "", "/linux,default-trigger";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ phandle = <0x79>;
+
+ act {
+ label = "led0";
+ linux,default-trigger = "mmc0";
+ gpios = <0x30 0x0 0x0>;
+ phandle = <0x2e>;
+ };
+
+ pwr {
+ label = "led1";
+ linux,default-trigger = "input";
+ gpios = <0x17 0x7 0x0>;
+ phandle = <0x2f>;
+ };
+ };
+
+ __symbols__ {
+ cpu_thermal = "/thermal-zones/cpu-thermal";
+ soc = "/soc";
+ dma = "/soc/dma@7e007000";
+ intc = "/soc/interrupt-controller@7e00b200";
+ watchdog = "/soc/watchdog@7e100000";
+ clocks = "/soc/cprman@7e101000";
+ random = "/soc/rng@7e104000";
+ mailbox = "/soc/mailbox@7e00b880";
+ gpio = "/soc/gpio@7e200000";
+ dpi_gpio0 = "/soc/gpio@7e200000/dpi_gpio0";
+ emmc_gpio22 = "/soc/gpio@7e200000/emmc_gpio22";
+ emmc_gpio34 = "/soc/gpio@7e200000/emmc_gpio34";
+ emmc_gpio48 = "/soc/gpio@7e200000/emmc_gpio48";
+ gpclk0_gpio4 = "/soc/gpio@7e200000/gpclk0_gpio4";
+ gpclk1_gpio5 = "/soc/gpio@7e200000/gpclk1_gpio5";
+ gpclk1_gpio42 = "/soc/gpio@7e200000/gpclk1_gpio42";
+ gpclk1_gpio44 = "/soc/gpio@7e200000/gpclk1_gpio44";
+ gpclk2_gpio6 = "/soc/gpio@7e200000/gpclk2_gpio6";
+ gpclk2_gpio43 = "/soc/gpio@7e200000/gpclk2_gpio43";
+ i2c0_gpio0 = "/soc/gpio@7e200000/i2c0_gpio0";
+ i2c0_gpio28 = "/soc/gpio@7e200000/i2c0_gpio28";
+ i2c0_gpio44 = "/soc/gpio@7e200000/i2c0_gpio44";
+ i2c1_gpio2 = "/soc/gpio@7e200000/i2c1_gpio2";
+ i2c1_gpio44 = "/soc/gpio@7e200000/i2c1_gpio44";
+ i2c_slave_gpio18 = "/soc/gpio@7e200000/i2c_slave_gpio18";
+ jtag_gpio4 = "/soc/gpio@7e200000/jtag_gpio4";
+ jtag_gpio22 = "/soc/gpio@7e200000/jtag_gpio22";
+ pcm_gpio18 = "/soc/gpio@7e200000/pcm_gpio18";
+ pcm_gpio28 = "/soc/gpio@7e200000/pcm_gpio28";
+ pwm0_gpio12 = "/soc/gpio@7e200000/pwm0_gpio12";
+ pwm0_gpio18 = "/soc/gpio@7e200000/pwm0_gpio18";
+ pwm0_gpio40 = "/soc/gpio@7e200000/pwm0_gpio40";
+ pwm1_gpio13 = "/soc/gpio@7e200000/pwm1_gpio13";
+ pwm1_gpio19 = "/soc/gpio@7e200000/pwm1_gpio19";
+ pwm1_gpio41 = "/soc/gpio@7e200000/pwm1_gpio41";
+ pwm1_gpio45 = "/soc/gpio@7e200000/pwm1_gpio45";
+ sdhost_pins = "/soc/gpio@7e200000/sdhost_gpio48";
+ sdhost_gpio48 = "/soc/gpio@7e200000/sdhost_gpio48";
+ spi0_gpio7 = "/soc/gpio@7e200000/spi0_gpio7";
+ spi0_gpio35 = "/soc/gpio@7e200000/spi0_gpio35";
+ spi1_gpio16 = "/soc/gpio@7e200000/spi1_gpio16";
+ spi2_gpio40 = "/soc/gpio@7e200000/spi2_gpio40";
+ uart0_gpio14 = "/soc/gpio@7e200000/uart0_gpio14";
+ uart0_ctsrts_gpio16 = "/soc/gpio@7e200000/uart0_ctsrts_gpio16";
+ uart0_ctsrts_gpio30 = "/soc/gpio@7e200000/uart0_ctsrts_gpio30";
+ uart0_gpio32 = "/soc/gpio@7e200000/uart0_gpio32";
+ uart0_gpio36 = "/soc/gpio@7e200000/uart0_gpio36";
+ uart0_ctsrts_gpio38 = "/soc/gpio@7e200000/uart0_ctsrts_gpio38";
+ uart1_gpio14 = "/soc/gpio@7e200000/uart1_gpio14";
+ uart1_ctsrts_gpio16 = "/soc/gpio@7e200000/uart1_ctsrts_gpio16";
+ uart1_gpio32 = "/soc/gpio@7e200000/uart1_gpio32";
+ uart1_ctsrts_gpio30 = "/soc/gpio@7e200000/uart1_ctsrts_gpio30";
+ uart1_gpio40 = "/soc/gpio@7e200000/uart1_gpio40";
+ uart1_ctsrts_gpio42 = "/soc/gpio@7e200000/uart1_ctsrts_gpio42";
+ dpi_18bit_gpio0 = "/soc/gpio@7e200000/dpi_18bit_gpio0";
+ spi0_pins = "/soc/gpio@7e200000/spi0_pins";
+ spi0_cs_pins = "/soc/gpio@7e200000/spi0_cs_pins";
+ i2c0_pins = "/soc/gpio@7e200000/i2c0";
+ i2c1_pins = "/soc/gpio@7e200000/i2c1";
+ i2s_pins = "/soc/gpio@7e200000/i2s";
+ sdio_pins = "/soc/gpio@7e200000/sdio_pins";
+ bt_pins = "/soc/gpio@7e200000/bt_pins";
+ uart0_pins = "/soc/gpio@7e200000/uart0_pins";
+ uart1_pins = "/soc/gpio@7e200000/uart1_pins";
+ audio_pins = "/soc/gpio@7e200000/audio_pins";
+ uart0 = "/soc/serial@7e201000";
+ sdhost = "/soc/mmc@7e202000";
+ i2s = "/soc/i2s@7e203000";
+ spi0 = "/soc/spi@7e204000";
+ spi = "/soc/spi@7e204000";
+ spidev0 = "/soc/spi@7e204000/spidev@0";
+ spidev1 = "/soc/spi@7e204000/spidev@1";
+ i2c0 = "/soc/i2c@7e205000";
+ pixelvalve0 = "/soc/pixelvalve@7e206000";
+ pixelvalve1 = "/soc/pixelvalve@7e207000";
+ dpi = "/soc/dpi@7e208000";
+ dsi0 = "/soc/dsi@7e209000";
+ thermal = "/soc/thermal@7e212000";
+ aux = "/soc/aux@0x7e215000";
+ uart1 = "/soc/serial@7e215040";
+ spi1 = "/soc/spi@7e215080";
+ spi2 = "/soc/spi@7e2150c0";
+ pwm = "/soc/pwm@7e20c000";
+ hvs = "/soc/hvs@7e400000";
+ dsi1 = "/soc/dsi@7e700000";
+ csi0 = "/soc/csi0@7e800000";
+ csi1 = "/soc/csi1@7e801000";
+ i2c1 = "/soc/i2c@7e804000";
+ i2c2 = "/soc/i2c@7e805000";
+ vec = "/soc/vec@7e806000";
+ pixelvalve2 = "/soc/pixelvalve@7e807000";
+ hdmi = "/soc/hdmi@7e902000";
+ usb = "/soc/usb@7e980000";
+ ethernet = "/soc/usb@7e980000/usb1@1/usbether@1";
+ v3d = "/soc/v3d@7ec00000";
+ vc4 = "/soc/gpu";
+ local_intc = "/soc/local_intc@40000000";
+ mmc = "/soc/mmc@7e300000";
+ firmwarekms = "/soc/firmwarekms@7e600000";
+ smi = "/soc/smi@7e600000";
+ axiperf = "/soc/axiperf";
+ firmware = "/soc/firmware";
+ power = "/soc/power";
+ fb = "/soc/fb";
+ vchiq = "/soc/vchiq";
+ vcsm = "/soc/vcsm";
+ audio = "/soc/audio";
+ sound = "/soc/sound";
+ virtgpio = "/soc/virtgpio";
+ expgpio = "/soc/expgpio";
+ clk_osc = "/clocks/clock@3";
+ clk_usb = "/clocks/clock@4";
+ usbphy = "/phy";
+ cpus = "/cpus";
+ cpu0 = "/cpus/cpu@0";
+ cpu1 = "/cpus/cpu@1";
+ cpu2 = "/cpus/cpu@2";
+ cpu3 = "/cpus/cpu@3";
+ vdd_5v0_reg = "/fixedregulator_5v0";
+ vdd_3v3_reg = "/fixedregulator_3v3";
+ leds = "/leds";
+ act_led = "/leds/act";
+ pwr_led = "/leds/pwr";
+ };
+};
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/ComponentName.c b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/ComponentName.c
new file mode 100644
index 000000000000..6e2709b13c9b
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/ComponentName.c
@@ -0,0 +1,219 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ **/
+
+#include "DwUsbHostDxe.h"
+
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+);
+
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gComponentName = {
+ ComponentNameGetDriverName,
+ ComponentNameGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) ComponentNameGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) ComponentNameGetControllerName,
+ "en"
+};
+
+
+STATIC EFI_UNICODE_STRING_TABLE mDriverName[] = {
+ {
+ "eng;en",
+ (CHAR16 *)L"Raspberry Pi USB Host Driver"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+STATIC EFI_UNICODE_STRING_TABLE mDeviceName[] = {
+ {
+ "eng;en",
+ (CHAR16 *)L"Raspberry Pi USB Host"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mDriverName,
+ DriverName,
+ (BOOLEAN)(This == &gComponentName)
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+ComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ if (ChildHandle != NULL) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mDeviceName,
+ ControllerName,
+ (BOOLEAN)(This == &gComponentName)
+ );
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DriverBinding.c b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DriverBinding.c
new file mode 100644
index 000000000000..7878251fcfc3
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DriverBinding.c
@@ -0,0 +1,269 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ **/
+
+#include "DwUsbHostDxe.h"
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ );
+
+STATIC EFI_DRIVER_BINDING_PROTOCOL mDriverBinding = {
+ DriverSupported,
+ DriverStart,
+ DriverStop,
+ 0xa,
+ NULL,
+ NULL
+};
+
+STATIC EFI_DW_DEVICE_PATH mDevicePath = {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8)(sizeof(VENDOR_DEVICE_PATH)),
+ (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8),
+ }
+ },
+ EFI_CALLER_ID_GUID
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ sizeof (EFI_DEVICE_PATH_PROTOCOL),
+ 0
+ }
+ }
+};
+
+STATIC EFI_HANDLE mDevice;
+STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ VOID *Temp;
+ EFI_STATUS Status;
+
+ if (Controller != mDevice) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = gBS->LocateProtocol (&gRaspberryPiFirmwareProtocolGuid, NULL,
+ (VOID **)&mFwProtocol);
+ if (EFI_ERROR (Status)) {
+ return EFI_NOT_READY;
+ }
+
+ if (gBS->HandleProtocol(Controller, &gEfiUsb2HcProtocolGuid,
+ (VOID **) &Temp) == EFI_SUCCESS) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ VOID *Dummy;
+ EFI_STATUS Status;
+ DWUSB_OTGHC_DEV *DwHc = NULL;
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiCallerIdGuid,
+ (VOID **) &Dummy,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = mFwProtocol->SetPowerState(RPI_FW_POWER_STATE_USB_HCD, TRUE, TRUE);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "Couldn't power on USB: %r\n", Status));
+ return Status;
+ }
+
+ Status = CreateDwUsbHc (&DwHc);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ /*
+ * UsbBusDxe as of b4e96b82b4e2e47e95014b51787ba5b43abac784 expects
+ * the HCD to do this. There is no agent invoking DwHcReset anymore.
+ */
+ DwHcReset(&DwHc->DwUsbOtgHc, 0);
+ DwHcSetState(&DwHc->DwUsbOtgHc, EfiUsbHcStateOperational);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Controller,
+ &gEfiUsb2HcProtocolGuid, &DwHc->DwUsbOtgHc,
+ NULL
+ );
+
+out:
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "Could not start DwUsbHostDxe: %r\n", Status));
+
+ DestroyDwUsbHc(DwHc);
+
+ mFwProtocol->SetPowerState(RPI_FW_POWER_STATE_USB_HCD, FALSE, FALSE);
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiCallerIdGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ }
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+DriverStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ DWUSB_OTGHC_DEV *DwHc;
+ EFI_USB2_HC_PROTOCOL *HcProtocol;
+
+ Status = gBS->HandleProtocol (
+ Controller,
+ &gEfiUsb2HcProtocolGuid,
+ (VOID **) &HcProtocol
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "DriverStop: HandleProtocol: %r\n", Status));
+ return Status;
+ }
+
+ DwHc = DWHC_FROM_THIS (HcProtocol);
+
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ Controller,
+ &gEfiUsb2HcProtocolGuid, &DwHc->DwUsbOtgHc,
+ NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "DriverStop: UninstallMultipleProtocolInterfaces: %r\n",
+ Status));
+ return Status;
+ }
+
+ DwHcQuiesce (DwHc);
+ DestroyDwUsbHc(DwHc);
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiCallerIdGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+ UEFI Driver Entry Point API
+
+ @param ImageHandle EFI_HANDLE.
+ @param SystemTable EFI_SYSTEM_TABLE.
+
+ @return EFI_SUCCESS Success.
+ EFI_DEVICE_ERROR Fail.
+**/
+
+EFI_STATUS
+EFIAPI
+DwUsbHostEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mDevice,
+ &gEfiDevicePathProtocolGuid, &mDevicePath,
+ &gEfiCallerIdGuid, NULL,
+ NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "InstallMultipleProtocolInterfaces: %r\n",
+ Status));
+ return Status;
+ }
+
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &mDriverBinding,
+ ImageHandle,
+ &gComponentName,
+ &gComponentName2
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "EfiLibInstallDriverBindingComponentName2: %r\n",
+ Status));
+ gBS->UninstallMultipleProtocolInterfaces (
+ mDevice,
+ &gEfiDevicePathProtocolGuid, &mDevicePath,
+ &gEfiCallerIdGuid, NULL,
+ NULL);
+ }
+
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.c b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.c
new file mode 100644
index 000000000000..93ac65c85070
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.c
@@ -0,0 +1,1644 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2015-2016, Linaro Limited. All rights reserved.
+ * Copyright (c) 2014 Marek Vasut <marex@denx.de>
+ * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ **/
+
+#include "DwUsbHostDxe.h"
+#include "DwcHw.h"
+
+/*
+ * Excessive (10s) timeout for reset.
+ */
+#define DW_HC_RESET_TIMEOUT_MS (10000)
+
+ /*
+ * TimerPeriodic to account for timeout processing
+ * within DwHcTransfer.
+ */
+#define TimerForTransfer TimerRelative
+
+/*
+ * https://www.quicklogic.com/assets/pdf/data-sheets/QL-Hi-Speed-USB-2.0-OTG-Controller-Data-Sheet.pdf
+ */
+
+typedef enum {
+ XFER_NOT_HALTED,
+ XFER_ERROR,
+ XFER_CSPLIT,
+ XFER_NAK,
+ XFER_STALL,
+ XFER_FRMOVRUN,
+ XFER_DONE
+} CHANNEL_HALT_REASON;
+
+typedef struct {
+ BOOLEAN Splitting;
+ BOOLEAN SplitStart;
+ UINT32 Tries;
+} SPLIT_CONTROL;
+
+EFI_STATUS DwHcInit (IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout);
+EFI_STATUS DwCoreInit (IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout);
+
+UINT32
+Wait4Bit (
+ IN EFI_EVENT Timeout,
+ IN UINT32 Reg,
+ IN UINT32 Mask,
+ IN BOOLEAN Set
+ )
+{
+ UINT32 Value;
+
+ do {
+ Value = MmioRead32 (Reg);
+ if (!Set) {
+ Value = ~Value;
+ }
+
+ if ((Value & Mask) == Mask) {
+ return 0;
+ }
+ } while (EFI_ERROR (gBS->CheckEvent (Timeout)));
+
+ DEBUG ((DEBUG_ERROR, "Wait4Bit: %a timeout (reg:0x%x, value:0x%x, mask:0x%x)\n",
+ Set ? "set" : "clear", Reg, Set ? Value : ~Value, Mask));
+
+ return 1;
+}
+
+CHANNEL_HALT_REASON
+Wait4Chhltd (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout,
+ IN UINT32 Channel,
+ IN UINT32 *Sub,
+ IN UINT32 *Toggle,
+ IN BOOLEAN IgnoreAck,
+ IN SPLIT_CONTROL *Split
+ )
+{
+ INT32 Ret;
+ UINT32 Hcint, Hctsiz;
+ UINT32 HcintCompHltAck = DWC2_HCINT_XFERCOMP;
+
+ MicroSecondDelay (100);
+ Ret = Wait4Bit (Timeout, DwHc->DwUsbBase + HCINT(Channel), DWC2_HCINT_CHHLTD, 1);
+ if (Ret) {
+ DEBUG((DEBUG_ERROR, "Channel %u did not halt\n", Channel));
+ return XFER_NOT_HALTED;
+ }
+
+ MicroSecondDelay (100);
+ Hcint = MmioRead32 (DwHc->DwUsbBase + HCINT(Channel));
+
+ ASSERT ((Hcint & DWC2_HCINT_CHHLTD) != 0);
+ Hcint &= ~DWC2_HCINT_CHHLTD;
+
+ if (!IgnoreAck ||
+ (Split->Splitting && Split->SplitStart)) {
+ HcintCompHltAck |= DWC2_HCINT_ACK;
+ } else {
+ Hcint &= ~DWC2_HCINT_ACK;
+ }
+
+ if ((Hcint & DWC2_HCINT_XACTERR) != 0) {
+ return XFER_ERROR;
+ }
+
+ if ((Hcint & DWC2_HCINT_NYET) != 0) {
+ return XFER_CSPLIT;
+ }
+
+ if ((Hcint & DWC2_HCINT_NAK) != 0) {
+ return XFER_NAK;
+ }
+
+ if ((Hcint & DWC2_HCINT_STALL) != 0) {
+ return XFER_STALL;
+ }
+
+ if ((Hcint & DWC2_HCINT_FRMOVRUN) != 0) {
+ return XFER_FRMOVRUN;
+ }
+
+ if (Split->Splitting &&
+ Split->SplitStart &&
+ ((Hcint & DWC2_HCINT_ACK) != 0)) {
+ Split->SplitStart = FALSE;
+ Split->Tries = 0;
+ return XFER_CSPLIT;
+ }
+
+ if (Hcint != HcintCompHltAck) {
+ DEBUG ((DEBUG_ERROR, "Wait4Chhltd: Channel %u HCINT 0x%x %a%a\n",
+ Channel, Hcint,
+ IgnoreAck ? "IgnoreAck " : "",
+ Split->SplitStart ? "split start" :
+ (Split->Splitting ? "split complete" : "")));
+ return XFER_ERROR;
+ }
+
+ Hctsiz = MmioRead32 (DwHc->DwUsbBase + HCTSIZ(Channel));
+ *Sub = (Hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) >> DWC2_HCTSIZ_XFERSIZE_OFFSET;
+ *Toggle = (Hctsiz & DWC2_HCTSIZ_PID_MASK) >> DWC2_HCTSIZ_PID_OFFSET;
+
+ return XFER_DONE;
+}
+
+VOID
+DwOtgHcInit (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN UINT8 HcNum,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 DevAddr,
+ IN UINT8 Endpoint,
+ IN UINT8 EpDir,
+ IN UINT8 EpType,
+ IN UINT16 MaxPacket,
+ IN SPLIT_CONTROL *SplitControl
+ )
+{
+ UINT32 Split = 0;
+ UINT32 Hcchar = (DevAddr << DWC2_HCCHAR_DEVADDR_OFFSET) |
+ (Endpoint << DWC2_HCCHAR_EPNUM_OFFSET) |
+ (EpDir << DWC2_HCCHAR_EPDIR_OFFSET) |
+ (EpType << DWC2_HCCHAR_EPTYPE_OFFSET) |
+ (MaxPacket << DWC2_HCCHAR_MPS_OFFSET) |
+ ((DeviceSpeed == EFI_USB_SPEED_LOW) ? DWC2_HCCHAR_LSPDDEV : 0);
+
+ MmioWrite32 (DwHc->DwUsbBase + HCINT(HcNum), 0x3FFF);
+
+ MmioWrite32 (DwHc->DwUsbBase + HCCHAR(HcNum), Hcchar);
+
+ if (SplitControl->Splitting) {
+ Split = DWC2_HCSPLT_SPLTENA |
+ ((Translator->TranslatorPortNumber) << DWC2_HCSPLT_PRTADDR_OFFSET) |
+ ((Translator->TranslatorHubAddress) << DWC2_HCSPLT_HUBADDR_OFFSET);
+
+ if (!SplitControl->SplitStart) {
+ Split |= DWC2_HCSPLT_COMPSPLT;
+ }
+ }
+
+ MmioWrite32 (DwHc->DwUsbBase + HCSPLT(HcNum), Split);
+}
+
+EFI_STATUS
+DwCoreReset (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout
+ )
+{
+ UINT32 Status;
+
+ Status = Wait4Bit (Timeout, DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_AHBIDLE, 1);
+ if (Status) {
+ DEBUG ((DEBUG_ERROR, "DwCoreReset: AHBIDLE Timeout!\n"));
+ return Status;
+ }
+
+ MmioWrite32 (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_CSFTRST);
+
+ Status = Wait4Bit (Timeout, DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_CSFTRST, 0);
+ if (Status) {
+ DEBUG ((DEBUG_ERROR, "DwCoreReset: CSFTRST Timeout!\n"));
+ return Status;
+ }
+
+ MicroSecondDelay (100000);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+DwHcTransfer (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout,
+ IN UINT32 Channel,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ IN UINT8 DeviceSpeed,
+ IN UINT8 DeviceAddress,
+ IN UINTN MaximumPacketLength,
+ IN OUT UINT32 *Pid,
+ IN UINT32 TransferDirection,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINT32 EpAddress,
+ IN UINT32 EpType,
+ OUT UINT32 *TransferResult,
+ IN BOOLEAN IgnoreAck
+ )
+{
+ UINT32 TxferLen;
+ UINT32 Done = 0;
+ UINT32 NumPackets;
+ UINT32 Sub;
+ UINT32 Ret = 0;
+ UINT32 StopTransfer = 0;
+ EFI_STATUS Status = EFI_SUCCESS;
+ SPLIT_CONTROL Split = { 0 };
+
+ EFI_TPL Tpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ *TransferResult = EFI_USB_NOERROR;
+
+ do {
+ restart_xfer:
+ if (DeviceSpeed == EFI_USB_SPEED_LOW ||
+ DeviceSpeed == EFI_USB_SPEED_FULL) {
+ Split.Splitting = TRUE;
+ Split.SplitStart = TRUE;
+ Split.Tries = 0;
+ }
+
+ TxferLen = *DataLength - Done;
+
+ if (TxferLen > DWC2_MAX_TRANSFER_SIZE) {
+ TxferLen = DWC2_MAX_TRANSFER_SIZE - MaximumPacketLength + 1;
+ }
+
+ if (TxferLen > DWC2_DATA_BUF_SIZE) {
+ TxferLen = DWC2_DATA_BUF_SIZE - MaximumPacketLength + 1;
+ }
+
+ if (Split.Splitting || TxferLen == 0) {
+ NumPackets = 1;
+ } else {
+ NumPackets = (TxferLen + MaximumPacketLength - 1) / MaximumPacketLength;
+ if (NumPackets > DWC2_MAX_PACKET_COUNT) {
+ NumPackets = DWC2_MAX_PACKET_COUNT;
+ TxferLen = NumPackets * MaximumPacketLength;
+ }
+ }
+
+ if (TransferDirection) { // in
+ TxferLen = NumPackets * MaximumPacketLength;
+ } else {
+ CopyMem (DwHc->AlignedBuffer, Data+Done, TxferLen);
+ ArmDataSynchronizationBarrier();
+ }
+
+restart_channel:
+ MmioWrite32 (DwHc->DwUsbBase + HCDMA(Channel),
+ (UINTN)DwHc->AlignedBufferBusAddress);
+
+ DwOtgHcInit (DwHc, Channel, Translator, DeviceSpeed,
+ DeviceAddress, EpAddress,
+ TransferDirection, EpType,
+ MaximumPacketLength, &Split);
+
+ MmioWrite32 (DwHc->DwUsbBase + HCTSIZ(Channel),
+ (TxferLen << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
+ (NumPackets << DWC2_HCTSIZ_PKTCNT_OFFSET) |
+ (*Pid << DWC2_HCTSIZ_PID_OFFSET));
+
+ MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(Channel),
+ ~(DWC2_HCCHAR_MULTICNT_MASK |
+ DWC2_HCCHAR_CHEN |
+ DWC2_HCCHAR_CHDIS),
+ ((1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
+ DWC2_HCCHAR_CHEN));
+
+ Ret = Wait4Chhltd (DwHc, Timeout, Channel, &Sub, Pid, IgnoreAck, &Split);
+
+ if (Ret == XFER_NOT_HALTED) {
+ /*
+ * FIXME: do proper channel reset.
+ */
+ MmioWrite32 (DwHc->DwUsbBase + HCCHAR(Channel), DWC2_HCCHAR_CHDIS);
+
+ *TransferResult = EFI_USB_ERR_TIMEOUT;
+ Status = EFI_DEVICE_ERROR;
+ break;
+ } else if (Ret == XFER_STALL) {
+ *TransferResult = EFI_USB_ERR_STALL;
+ Status = EFI_DEVICE_ERROR;
+ break;
+ } else if (Ret == XFER_CSPLIT) {
+ ASSERT (Split.Splitting);
+
+ if (Split.Tries++ < 3) {
+ goto restart_channel;
+ }
+
+ goto restart_xfer;
+ } else if (Ret == XFER_ERROR) {
+ *TransferResult =
+ EFI_USB_ERR_CRC |
+ EFI_USB_ERR_TIMEOUT |
+ EFI_USB_ERR_BITSTUFF |
+ EFI_USB_ERR_SYSTEM;
+ Status = EFI_DEVICE_ERROR;
+ break;
+ } else if (Ret == XFER_FRMOVRUN) {
+ goto restart_channel;
+ } else if (Ret == XFER_NAK) {
+ if (Split.Splitting &&
+ (EpType == DWC2_HCCHAR_EPTYPE_CONTROL)) {
+ goto restart_xfer;
+ }
+
+ *TransferResult = EFI_USB_ERR_NAK;
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ if (TransferDirection) { // in
+ ArmDataSynchronizationBarrier();
+ TxferLen -= Sub;
+ CopyMem (Data+Done, DwHc->AlignedBuffer, TxferLen);
+ if (Sub) {
+ StopTransfer = 1;
+ }
+ }
+
+ Done += TxferLen;
+ } while (Done < *DataLength && !StopTransfer);
+
+ MmioWrite32 (DwHc->DwUsbBase + HCINTMSK(Channel), 0);
+ MmioWrite32 (DwHc->DwUsbBase + HCINT(Channel), 0xFFFFFFFF);
+
+ *DataLength = Done;
+
+ gBS->RestoreTPL (Tpl);
+
+ ASSERT (!EFI_ERROR (Status) ||
+ *TransferResult != EFI_USB_NOERROR);
+
+ return Status;
+}
+
+STATIC
+DWUSB_DEFERRED_REQ *
+DwHcFindDeferredTransfer (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress
+ )
+{
+ LIST_ENTRY *Entry;
+
+ EFI_LIST_FOR_EACH (Entry, &DwHc->DeferredList) {
+ DWUSB_DEFERRED_REQ *Req = EFI_LIST_CONTAINER (Entry, DWUSB_DEFERRED_REQ,
+ List);
+
+ if (Req->DeviceAddress == DeviceAddress &&
+ Req->EpAddress == (EndPointAddress & 0xF) &&
+ Req->TransferDirection == ((EndPointAddress >> 7) & 0x01)) {
+ return Req;
+ }
+ }
+
+ return NULL;
+}
+
+STATIC
+VOID
+DwHcDeferredTransfer (
+ IN DWUSB_DEFERRED_REQ *Req
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT TimeoutEvt = NULL;
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER, 0, NULL, NULL,
+ &TimeoutEvt
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Status = gBS->SetTimer (TimeoutEvt, TimerForTransfer,
+ EFI_TIMER_PERIOD_MILLISECONDS(Req->TimeOut));
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Req->TransferResult = EFI_USB_NOERROR;
+ Status = DwHcTransfer (Req->DwHc, TimeoutEvt,
+ Req->Channel, Req->Translator,
+ Req->DeviceSpeed, Req->DeviceAddress,
+ Req->MaximumPacketLength, &Req->Pid,
+ Req->TransferDirection, Req->Data, &Req->DataLength,
+ Req->EpAddress, Req->EpType, &Req->TransferResult,
+ Req->IgnoreAck);
+
+ if (Req->EpType == DWC2_HCCHAR_EPTYPE_INTR &&
+ Status == EFI_DEVICE_ERROR &&
+ Req->TransferResult == EFI_USB_ERR_NAK) {
+ /*
+ * Swallow the NAK, the upper layer expects us to resubmit automatically.
+ */
+ goto out;
+ }
+
+ Req->CallbackFunction (Req->Data, Req->DataLength,
+ Req->CallbackContext,
+ Req->TransferResult);
+ out:
+ if (TimeoutEvt != NULL) {
+ gBS->CloseEvent (TimeoutEvt);
+ }
+}
+
+/**
+ EFI_USB2_HC_PROTOCOL APIs
+**/
+
+EFI_STATUS
+EFIAPI
+DwHcGetCapability (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ OUT UINT8 *MaxSpeed,
+ OUT UINT8 *PortNumber,
+ OUT UINT8 *Is64BitCapable
+ )
+{
+ if ((MaxSpeed == NULL) || (PortNumber == NULL) || (Is64BitCapable == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *MaxSpeed = EFI_USB_SPEED_HIGH;
+ *PortNumber = 1;
+ *Is64BitCapable = 1;
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcReset (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT16 Attributes
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT TimeoutEvt = NULL;
+
+ DWUSB_OTGHC_DEV *DwHc;
+ DwHc = DWHC_FROM_THIS (This);
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER, 0, NULL, NULL,
+ &TimeoutEvt
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Status = gBS->SetTimer (TimeoutEvt, TimerRelative,
+ EFI_TIMER_PERIOD_MILLISECONDS(DW_HC_RESET_TIMEOUT_MS));
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Status = DwCoreInit(DwHc, TimeoutEvt);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "DwCoreInit failed\n"));
+ goto out;
+ }
+
+ Status = DwHcInit(DwHc, TimeoutEvt);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "DwHcInit failed\n"));
+ goto out;
+ }
+
+ MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+ ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+ DWC2_HPRT0_PRTRST);
+
+ MicroSecondDelay (50000);
+
+ MmioAnd32 (DwHc->DwUsbBase + HPRT0, ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG |
+ DWC2_HPRT0_PRTRST));
+
+ out:
+ if (TimeoutEvt != NULL) {
+ gBS->CloseEvent (TimeoutEvt);
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcGetState (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ OUT EFI_USB_HC_STATE *State
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+
+ DwHc = DWHC_FROM_THIS (This);
+
+ *State = DwHc->DwHcState;
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcSetState (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN EFI_USB_HC_STATE State
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+
+ DwHc = DWHC_FROM_THIS (This);
+
+ DwHc->DwHcState = State;
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcGetRootHubPortStatus (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ UINT32 Hprt0;
+
+ if (PortNumber > DWC2_HC_PORT) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (PortStatus == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DwHc = DWHC_FROM_THIS (This);
+
+ PortStatus->PortStatus = 0;
+ PortStatus->PortChangeStatus = 0;
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+
+ if (Hprt0 & DWC2_HPRT0_PRTCONNSTS) {
+ PortStatus->PortStatus |= USB_PORT_STAT_CONNECTION;
+ }
+
+ if (Hprt0 & DWC2_HPRT0_PRTENA) {
+ PortStatus->PortStatus |= USB_PORT_STAT_ENABLE;
+ }
+
+ if (Hprt0 & DWC2_HPRT0_PRTSUSP) {
+ PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND;
+ }
+
+ if (Hprt0 & DWC2_HPRT0_PRTOVRCURRACT) {
+ PortStatus->PortStatus |= USB_PORT_STAT_OVERCURRENT;
+ }
+
+ if (Hprt0 & DWC2_HPRT0_PRTRST) {
+ PortStatus->PortStatus |= USB_PORT_STAT_RESET;
+ }
+
+ if (Hprt0 & DWC2_HPRT0_PRTPWR) {
+ PortStatus->PortStatus |= USB_PORT_STAT_POWER;
+ }
+
+ PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
+
+ if (Hprt0 & DWC2_HPRT0_PRTENCHNG) {
+ // PortStatus->PortChangeStatus |= USB_PORT_STAT_C_ENABLE;
+ }
+
+ if (Hprt0 & DWC2_HPRT0_PRTCONNDET) {
+ PortStatus->PortChangeStatus |= USB_PORT_STAT_C_CONNECTION;
+ }
+
+ if (Hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG) {
+ PortStatus->PortChangeStatus |= USB_PORT_STAT_C_OVERCURRENT;
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcSetRootHubPortFeature (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ UINT32 Hprt0;
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ if (PortNumber > DWC2_HC_PORT) {
+ Status = EFI_INVALID_PARAMETER;
+ goto End;
+ }
+
+ DwHc = DWHC_FROM_THIS (This);
+
+ switch (PortFeature) {
+ case EfiUsbPortEnable:
+ break;
+ case EfiUsbPortSuspend:
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+ Hprt0 |= DWC2_HPRT0_PRTSUSP;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ case EfiUsbPortReset:
+ MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+ ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+ DWC2_HPRT0_PRTRST);
+ MicroSecondDelay (50000);
+ MmioAnd32 (DwHc->DwUsbBase + HPRT0, ~DWC2_HPRT0_PRTRST);
+ break;
+ case EfiUsbPortPower:
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+ Hprt0 |= DWC2_HPRT0_PRTPWR;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ case EfiUsbPortOwner:
+ break;
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ End:
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcClearRootHubPortFeature (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ UINT32 Hprt0;
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ if (PortNumber > DWC2_HC_PORT) {
+ Status = EFI_INVALID_PARAMETER;
+ goto End;
+ }
+
+ DwHc = DWHC_FROM_THIS (This);
+
+ switch (PortFeature) {
+ case EfiUsbPortEnable:
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+ Hprt0 |= DWC2_HPRT0_PRTENA;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ case EfiUsbPortReset:
+ MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+ ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+ DWC2_HPRT0_PRTRST);
+ MicroSecondDelay (50000);
+ MmioAnd32 (DwHc->DwUsbBase + HPRT0, ~DWC2_HPRT0_PRTRST);
+ break;
+ case EfiUsbPortSuspend:
+ MmioWrite32 (DwHc->DwUsbBase + PCGCCTL, 0);
+ MicroSecondDelay (40000);
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+ Hprt0 |= DWC2_HPRT0_PRTRES;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ Hprt0 &= ~DWC2_HPRT0_PRTSUSP;
+ MicroSecondDelay (150000);
+ Hprt0 &= ~DWC2_HPRT0_PRTRES;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ case EfiUsbPortPower:
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+ Hprt0 &= ~DWC2_HPRT0_PRTPWR;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ case EfiUsbPortOwner:
+ break;
+ case EfiUsbPortConnectChange:
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~DWC2_HPRT0_PRTCONNDET;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ case EfiUsbPortResetChange:
+ break;
+ case EfiUsbPortEnableChange:
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~DWC2_HPRT0_PRTENCHNG;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ case EfiUsbPortSuspendChange:
+ break;
+ case EfiUsbPortOverCurrentChange:
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~DWC2_HPRT0_PRTOVRCURRCHNG;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ break;
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ End:
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcControlTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN TimeOut,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ EFI_STATUS Status;
+ UINT32 Pid;
+ UINTN Length;
+ EFI_USB_DATA_DIRECTION StatusDirection;
+ UINT32 Direction;
+ EFI_EVENT TimeoutEvt = NULL;
+
+ if ((Request == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection != EfiUsbDataIn) &&
+ (TransferDirection != EfiUsbDataOut) &&
+ (TransferDirection != EfiUsbNoData)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection == EfiUsbNoData) &&
+ ((Data != NULL) || (*DataLength != 0))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection != EfiUsbNoData) &&
+ ((Data == NULL) || (*DataLength == 0))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((MaximumPacketLength != 8) && (MaximumPacketLength != 16) &&
+ (MaximumPacketLength != 32) && (MaximumPacketLength != 64)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((DeviceSpeed == EFI_USB_SPEED_LOW) && (MaximumPacketLength != 8)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DwHc = DWHC_FROM_THIS(This);
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER, 0, NULL, NULL,
+ &TimeoutEvt
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Status = gBS->SetTimer (TimeoutEvt, TimerForTransfer,
+ EFI_TIMER_PERIOD_MILLISECONDS(TimeOut));
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Pid = DWC2_HC_PID_SETUP;
+ Length = 8;
+ Status = DwHcTransfer (DwHc, TimeoutEvt,
+ DWC2_HC_CHANNEL, Translator, DeviceSpeed,
+ DeviceAddress, MaximumPacketLength, &Pid, 0,
+ Request, &Length, 0, DWC2_HCCHAR_EPTYPE_CONTROL,
+ TransferResult, 1);
+
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "Setup Stage Error for device 0x%x: 0x%x\n",
+ DeviceAddress, *TransferResult));
+ goto out;
+ }
+
+ if (Data) {
+ Pid = DWC2_HC_PID_DATA1;
+
+ if (TransferDirection == EfiUsbDataIn) {
+ Direction = 1;
+ } else {
+ Direction = 0;
+ }
+
+ Status = DwHcTransfer (DwHc, TimeoutEvt,
+ DWC2_HC_CHANNEL, Translator, DeviceSpeed,
+ DeviceAddress, MaximumPacketLength, &Pid,
+ Direction, Data, DataLength, 0,
+ DWC2_HCCHAR_EPTYPE_CONTROL,
+ TransferResult, 0);
+
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "Data Stage Error for device 0x%x: 0x%x\n",
+ DeviceAddress, *TransferResult));
+ goto out;
+ }
+ }
+
+ if ((TransferDirection == EfiUsbDataOut) ||
+ (TransferDirection == EfiUsbNoData)) {
+ StatusDirection = 1;
+ } else {
+ StatusDirection = 0;
+ }
+
+ Pid = DWC2_HC_PID_DATA1;
+ Length = 0;
+ Status = DwHcTransfer (DwHc, TimeoutEvt,
+ DWC2_HC_CHANNEL, Translator, DeviceSpeed,
+ DeviceAddress, MaximumPacketLength, &Pid,
+ StatusDirection, DwHc->StatusBuffer, &Length, 0,
+ DWC2_HCCHAR_EPTYPE_CONTROL, TransferResult, 1);
+
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "Status Stage Error for 0x%x: 0x%x\n",
+ DeviceAddress, *TransferResult));
+ goto out;
+ }
+
+out:
+ if (TimeoutEvt != NULL) {
+ gBS->CloseEvent (TimeoutEvt);
+ }
+
+ if (EFI_ERROR(Status)) {
+ DEBUG((DEBUG_ERROR, "RequestType 0x%x\n", Request->RequestType));
+ DEBUG((DEBUG_ERROR, "Request 0x%x\n", Request->Request));
+ DEBUG((DEBUG_ERROR, "Value 0x%x\n", Request->Value));
+ DEBUG((DEBUG_ERROR, "Index 0x%x\n", Request->Index));
+ DEBUG((DEBUG_ERROR, "Length 0x%x\n", Request->Length));
+ }
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcBulkTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN UINT8 DataBuffersNumber,
+ IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ EFI_STATUS Status;
+ UINT8 TransferDirection;
+ UINT8 EpAddress;
+ UINT32 Pid;
+ EFI_EVENT TimeoutEvt = NULL;
+
+ if ((Data == NULL) || (Data[0] == NULL) ||
+ (DataLength == NULL) || (*DataLength == 0) ||
+ (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 0) && (*DataToggle != 1)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((DeviceSpeed == EFI_USB_SPEED_LOW) ||
+ (DeviceSpeed == EFI_USB_SPEED_SUPER)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) ||
+ ((DeviceSpeed == EFI_USB_SPEED_HIGH) && (MaximumPacketLength > 512)))
+ return EFI_INVALID_PARAMETER;
+
+ DwHc = DWHC_FROM_THIS (This);
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER, 0, NULL, NULL,
+ &TimeoutEvt
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Status = gBS->SetTimer (TimeoutEvt, TimerForTransfer,
+ EFI_TIMER_PERIOD_MILLISECONDS(TimeOut));
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ Status = EFI_DEVICE_ERROR;
+ TransferDirection = (EndPointAddress >> 7) & 0x01;
+ EpAddress = EndPointAddress & 0x0F;
+ Pid = (*DataToggle << 1);
+
+ Status = DwHcTransfer (DwHc, TimeoutEvt,
+ DWC2_HC_CHANNEL_BULK, Translator, DeviceSpeed,
+ DeviceAddress, MaximumPacketLength, &Pid,
+ TransferDirection, Data[0], DataLength, EpAddress,
+ DWC2_HCCHAR_EPTYPE_BULK, TransferResult, 1);
+
+ *DataToggle = (Pid >> 1);
+
+ out:
+ if (TimeoutEvt != NULL) {
+ gBS->CloseEvent (TimeoutEvt);
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcAsyncInterruptTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN BOOLEAN IsNewTransfer,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN PollingInterval,
+ IN UINTN DataLength,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallbackFunction,
+ IN VOID *Context OPTIONAL
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ EFI_STATUS Status;
+ EFI_TPL PreviousTpl;
+ VOID *Data = NULL;
+ DWUSB_DEFERRED_REQ *FoundReq = NULL;
+ DWUSB_DEFERRED_REQ *NewReq = NULL;
+
+ if (!(EndPointAddress & USB_ENDPOINT_DIR_IN)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DwHc = DWHC_FROM_THIS (This);
+
+ PreviousTpl = gBS->RaiseTPL(TPL_NOTIFY);
+ FoundReq = DwHcFindDeferredTransfer(DwHc, DeviceAddress, EndPointAddress);
+
+ if (IsNewTransfer) {
+ if (FoundReq != NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto done;
+ }
+
+ if (DataLength == 0) {
+ Status = EFI_INVALID_PARAMETER;
+ goto done;
+ }
+
+ if ((*DataToggle != 1) && (*DataToggle != 0)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto done;
+ }
+
+ if ((PollingInterval > 255) || (PollingInterval < 1)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto done;
+ }
+
+ if (CallbackFunction == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto done;
+ }
+ }
+
+ if (!IsNewTransfer) {
+ if (FoundReq == NULL) {
+ DEBUG ((DEBUG_ERROR,
+ "%u:%u> transfer not found\n",
+ DeviceAddress,
+ EndPointAddress & 0xF));
+ Status = EFI_INVALID_PARAMETER;
+ goto done;
+ }
+
+ *DataToggle = FoundReq->Pid >> 1;
+ FreePool (FoundReq->Data);
+
+ RemoveEntryList (&FoundReq->List);
+ FreePool (FoundReq);
+
+ Status = EFI_SUCCESS;
+ goto done;
+ }
+
+ NewReq = AllocateZeroPool (sizeof *NewReq);
+ if (NewReq == NULL) {
+ DEBUG ((DEBUG_ERROR, "DwHcAsyncInterruptTransfer: failed to allocate req"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto done;
+ }
+
+ Data = AllocateZeroPool (DataLength);
+ if (Data == NULL) {
+ DEBUG ((DEBUG_ERROR, "DwHcAsyncInterruptTransfer: failed to allocate buffer\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto done;
+ }
+
+ InitializeListHead (&NewReq->List);
+
+ NewReq->FrameInterval = PollingInterval;
+ NewReq->TargetFrame = DwHc->CurrentFrame +
+ NewReq->FrameInterval;
+
+ NewReq->DwHc = DwHc;
+ NewReq->Channel = DWC2_HC_CHANNEL_ASYNC;
+ NewReq->Translator = Translator;
+ NewReq->DeviceSpeed = DeviceSpeed;
+ NewReq->DeviceAddress = DeviceAddress;
+ NewReq->MaximumPacketLength = MaximumPacketLength;
+ NewReq->TransferDirection = (EndPointAddress >> 7) & 0x01;
+ NewReq->Data = Data;
+ NewReq->DataLength = DataLength;
+ NewReq->Pid = *DataToggle << 1;
+ NewReq->EpAddress = EndPointAddress & 0x0F;
+ NewReq->EpType = DWC2_HCCHAR_EPTYPE_INTR;
+ NewReq->IgnoreAck = FALSE;
+ NewReq->CallbackFunction = CallbackFunction;
+ NewReq->CallbackContext = Context;
+ NewReq->TimeOut = 1000; /* 1000 ms */
+
+ InsertTailList (&DwHc->DeferredList, &NewReq->List);
+ Status = EFI_SUCCESS;
+
+ done:
+ gBS->RestoreTPL(PreviousTpl);
+
+ if (Status != EFI_SUCCESS) {
+ if (Data != NULL) {
+ FreePool (Data);
+ }
+
+ if (NewReq != NULL) {
+ FreePool (NewReq);
+ }
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcSyncInterruptTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN TimeOut,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ EFI_STATUS Status;
+ EFI_EVENT TimeoutEvt;
+ UINT8 TransferDirection;
+ UINT8 EpAddress;
+ UINT32 Pid;
+
+ DwHc = DWHC_FROM_THIS(This);
+
+ if (Data == NULL ||
+ DataLength == NULL ||
+ DataToggle == NULL ||
+ TransferResult == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*DataLength == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 0) && (*DataToggle != 1)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER, 0, NULL,
+ NULL, &TimeoutEvt
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->SetTimer (TimeoutEvt, TimerForTransfer, EFI_TIMER_PERIOD_MILLISECONDS(TimeOut));
+ if (EFI_ERROR (Status)) {
+ goto out;
+ }
+
+ TransferDirection = (EndPointAddress >> 7) & 0x01;
+ EpAddress = EndPointAddress & 0x0F;
+ Pid = (*DataToggle << 1);
+ Status = DwHcTransfer(DwHc, TimeoutEvt,
+ DWC2_HC_CHANNEL_SYNC, Translator,
+ DeviceSpeed, DeviceAddress,
+ MaximumPacketLength,
+ &Pid, TransferDirection, Data,
+ DataLength, EpAddress,
+ DWC2_HCCHAR_EPTYPE_INTR,
+ TransferResult, 0);
+ *DataToggle = (Pid >> 1);
+
+ out:
+ if (TimeoutEvt != NULL) {
+ gBS->CloseEvent (TimeoutEvt);
+ }
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcIsochronousTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN UINT8 DataBuffersNumber,
+ IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],
+ IN UINTN DataLength,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ DEBUG((DEBUG_ERROR, "Iso\n"));
+ return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcAsyncIsochronousTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN UINT8 DataBuffersNumber,
+ IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],
+ IN UINTN DataLength,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,
+ IN VOID *Context
+ )
+{
+ DEBUG((DEBUG_ERROR, "AsyncIso\n"));
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Supported Functions
+**/
+
+VOID
+InitFslspClkSel (
+ IN DWUSB_OTGHC_DEV *DwHc
+ )
+{
+ UINT32 PhyClk;
+
+ PhyClk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ;
+
+ MmioAndThenOr32 (DwHc->DwUsbBase + HCFG,
+ ~DWC2_HCFG_FSLSPCLKSEL_MASK,
+ PhyClk << DWC2_HCFG_FSLSPCLKSEL_OFFSET);
+}
+
+VOID
+DwFlushTxFifo (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout,
+ IN INT32 Num
+ )
+{
+ UINT32 Status;
+
+ MmioWrite32 (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_TXFFLSH |
+ (Num << DWC2_GRSTCTL_TXFNUM_OFFSET));
+
+ Status = Wait4Bit (Timeout, DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_TXFFLSH, 0);
+ if (Status)
+ DEBUG ((DEBUG_ERROR, "DwFlushTxFifo: Timeout!\n"));
+
+ MicroSecondDelay (1);
+}
+
+VOID
+DwFlushRxFifo (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout
+ )
+{
+ UINT32 Status;
+
+ MmioWrite32 (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_RXFFLSH);
+
+ Status = Wait4Bit (Timeout, DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_RXFFLSH, 0);
+ if (Status)
+ DEBUG ((DEBUG_ERROR, "DwFlushRxFifo: Timeout!\n"));
+
+ MicroSecondDelay (1);
+}
+
+EFI_STATUS
+DwHcInit (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout
+ )
+{
+ UINT32 NpTxFifoSz = 0;
+ UINT32 pTxFifoSz = 0;
+ UINT32 Hprt0 = 0;
+ INT32 i, Status, NumChannels;
+
+ MmioWrite32 (DwHc->DwUsbBase + PCGCCTL, 0);
+
+ InitFslspClkSel (DwHc);
+
+ MmioWrite32 (DwHc->DwUsbBase + GRXFSIZ, DWC2_HOST_RX_FIFO_SIZE);
+
+ NpTxFifoSz |= DWC2_HOST_NPERIO_TX_FIFO_SIZE << DWC2_FIFOSIZE_DEPTH_OFFSET;
+ NpTxFifoSz |= DWC2_HOST_RX_FIFO_SIZE << DWC2_FIFOSIZE_STARTADDR_OFFSET;
+ MmioWrite32 (DwHc->DwUsbBase + GNPTXFSIZ, NpTxFifoSz);
+
+ pTxFifoSz |= DWC2_HOST_PERIO_TX_FIFO_SIZE << DWC2_FIFOSIZE_DEPTH_OFFSET;
+ pTxFifoSz |= (DWC2_HOST_RX_FIFO_SIZE + DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
+ DWC2_FIFOSIZE_STARTADDR_OFFSET;
+ MmioWrite32 (DwHc->DwUsbBase + HPTXFSIZ, pTxFifoSz);
+
+ MmioAnd32 (DwHc->DwUsbBase + GOTGCTL, ~(DWC2_GOTGCTL_HSTSETHNPEN));
+
+ DwFlushTxFifo (DwHc, Timeout, 0x10);
+ DwFlushRxFifo (DwHc, Timeout);
+
+ NumChannels = MmioRead32 (DwHc->DwUsbBase + GHWCFG2);
+ NumChannels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK;
+ NumChannels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET;
+ NumChannels += 1;
+ DEBUG ((DEBUG_INFO, "Host has %u channels\n", NumChannels));
+
+ for (i=0; i<NumChannels; i++)
+ MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(i),
+ ~(DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR),
+ DWC2_HCCHAR_CHDIS);
+
+ for (i=0; i<NumChannels; i++) {
+ MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(i),
+ ~DWC2_HCCHAR_EPDIR,
+ (DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS));
+ Status = Wait4Bit (Timeout, DwHc->DwUsbBase + HCCHAR(i), DWC2_HCCHAR_CHEN, 0);
+ if (Status) {
+ DEBUG ((DEBUG_ERROR, "DwHcInit: Timeout!\n"));
+ return Status;
+ }
+ }
+
+ if (MmioRead32 (DwHc->DwUsbBase + GINTSTS) & DWC2_GINTSTS_CURMODE_HOST) {
+ Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+ Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET);
+ Hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+
+ if (!(Hprt0 & DWC2_HPRT0_PRTPWR)) {
+ Hprt0 |= DWC2_HPRT0_PRTPWR;
+ MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+DwCoreInit (
+ IN DWUSB_OTGHC_DEV *DwHc,
+ IN EFI_EVENT Timeout
+ )
+{
+ UINT32 AhbCfg = 0;
+ UINT32 UsbCfg = 0;
+ EFI_STATUS Status;
+
+ UsbCfg = MmioRead32 (DwHc->DwUsbBase + GUSBCFG);
+
+ UsbCfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
+ UsbCfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
+
+ MmioWrite32 (DwHc->DwUsbBase + GUSBCFG, UsbCfg);
+
+ Status = DwCoreReset (DwHc, Timeout);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "DwCoreReset failed\n"));
+ return Status;
+ }
+
+ UsbCfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF);
+ UsbCfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET;
+ UsbCfg &= ~DWC2_GUSBCFG_DDRSEL;
+
+ MmioWrite32 (DwHc->DwUsbBase + GUSBCFG, UsbCfg);
+
+ Status = DwCoreReset (DwHc, Timeout);
+ if (Status != EFI_SUCCESS) {
+ DEBUG((DEBUG_ERROR, "DwCoreReset 2 failed\n"));
+ return Status;
+ }
+
+ UsbCfg = MmioRead32 (DwHc->DwUsbBase + GUSBCFG);
+
+ UsbCfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M);
+ MmioWrite32 (DwHc->DwUsbBase + GUSBCFG, UsbCfg);
+
+ AhbCfg &= ~DWC2_GAHBCFG_AXI_BURST4_MASK;
+ AhbCfg |= DWC2_GAHBCFG_DMAENABLE | DWC2_GAHBCFG_WAIT_AXI_WRITES;
+
+ MmioWrite32 (DwHc->DwUsbBase + GAHBCFG, AhbCfg);
+ MmioAnd32 (DwHc->DwUsbBase + GUSBCFG, ~(DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP));
+
+ return EFI_SUCCESS;
+}
+
+VOID
+DestroyDwUsbHc(
+ IN DWUSB_OTGHC_DEV *DwHc
+ )
+{
+ UINT32 Pages;
+ EFI_TPL PreviousTpl;
+
+ if (DwHc == NULL) {
+ return;
+ }
+
+ if (DwHc->PeriodicEvent != NULL) {
+ PreviousTpl = gBS->RaiseTPL(TPL_NOTIFY);
+ gBS->CloseEvent (DwHc->PeriodicEvent);
+ gBS->RestoreTPL(PreviousTpl);
+ }
+
+ if (DwHc->ExitBootServiceEvent != NULL) {
+ gBS->CloseEvent (DwHc->ExitBootServiceEvent);
+ }
+
+ Pages = EFI_SIZE_TO_PAGES (DWC2_DATA_BUF_SIZE);
+ DmaUnmap (DwHc->AlignedBufferMapping);
+ DmaFreeBuffer (Pages, DwHc->AlignedBuffer);
+
+ Pages = EFI_SIZE_TO_PAGES (DWC2_STATUS_BUF_SIZE);
+ FreePages (DwHc->StatusBuffer, Pages);
+
+ gBS->FreePool (DwHc);
+}
+
+STATIC
+VOID
+EFIAPI
+DwUsbHcExitBootService (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+
+ DwHc = (DWUSB_OTGHC_DEV *) Context;
+ DwHcQuiesce (DwHc);
+}
+
+STATIC
+UINT32
+FramesPassed (
+ IN DWUSB_OTGHC_DEV *DwHc
+ )
+{
+ UINT32 MicroFrameStart = DwHc->LastMicroFrame;
+ UINT32 MicroFrameEnd =
+ MmioRead32 (DwHc->DwUsbBase + HFNUM) &
+ DWC2_HFNUM_FRNUM_MASK;
+ UINT32 MicroFramesPassed;
+
+ DwHc->LastMicroFrame = (UINT16) MicroFrameEnd;
+
+ if (MicroFrameEnd < MicroFrameStart) {
+ /*
+ * Being delayed by 0x8000 microframes is 262 seconds.
+ * Unlikely. Also, we can't really do better unless we
+ * start polling time (which is tedious in EFI...).
+ */
+ MicroFrameEnd += DWC2_HFNUM_FRNUM_MASK + 1;
+ }
+
+ MicroFramesPassed = MicroFrameEnd - MicroFrameStart;
+
+ /*
+ * Round up. We're supposedly getting called every
+ * 8 microframes anyway. This means we'll end up
+ * going a bit faster, which is okay.
+ */
+ return ALIGN_VALUE(MicroFramesPassed, 8) / 8;
+}
+
+STATIC
+VOID
+DwHcPeriodicHandler (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINT32 Frame;
+ LIST_ENTRY *Entry;
+ LIST_ENTRY *NextEntry;
+ DWUSB_OTGHC_DEV *DwHc = Context;
+
+ DwHc->CurrentFrame += FramesPassed(DwHc);
+ Frame = DwHc->CurrentFrame;
+
+ EFI_LIST_FOR_EACH_SAFE (Entry, NextEntry,
+ &DwHc->DeferredList) {
+ DWUSB_DEFERRED_REQ *Req = EFI_LIST_CONTAINER (Entry, DWUSB_DEFERRED_REQ,
+ List);
+
+ if (Frame >= Req->TargetFrame) {
+ Req->TargetFrame = Frame + Req->FrameInterval;
+ DwHcDeferredTransfer(Req);
+ }
+ }
+}
+
+EFI_STATUS
+CreateDwUsbHc (
+ OUT DWUSB_OTGHC_DEV **OutDwHc
+ )
+{
+ DWUSB_OTGHC_DEV *DwHc;
+ UINT32 Pages;
+ UINTN BufferSize;
+ EFI_STATUS Status;
+
+ DwHc = AllocateZeroPool (sizeof(DWUSB_OTGHC_DEV));
+ if (DwHc == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DwHc->Signature = DWUSB_OTGHC_DEV_SIGNATURE;
+ DwHc->DwUsbOtgHc.GetCapability = DwHcGetCapability;
+ DwHc->DwUsbOtgHc.Reset = DwHcReset;
+ DwHc->DwUsbOtgHc.GetState = DwHcGetState;
+ DwHc->DwUsbOtgHc.SetState = DwHcSetState;
+ DwHc->DwUsbOtgHc.ControlTransfer = DwHcControlTransfer;
+ DwHc->DwUsbOtgHc.BulkTransfer = DwHcBulkTransfer;
+ DwHc->DwUsbOtgHc.AsyncInterruptTransfer = DwHcAsyncInterruptTransfer;
+ DwHc->DwUsbOtgHc.SyncInterruptTransfer = DwHcSyncInterruptTransfer;
+ DwHc->DwUsbOtgHc.IsochronousTransfer = DwHcIsochronousTransfer;
+ DwHc->DwUsbOtgHc.AsyncIsochronousTransfer = DwHcAsyncIsochronousTransfer;
+ DwHc->DwUsbOtgHc.GetRootHubPortStatus = DwHcGetRootHubPortStatus;
+ DwHc->DwUsbOtgHc.SetRootHubPortFeature = DwHcSetRootHubPortFeature;
+ DwHc->DwUsbOtgHc.ClearRootHubPortFeature = DwHcClearRootHubPortFeature;
+ DwHc->DwUsbOtgHc.MajorRevision = 0x02;
+ DwHc->DwUsbOtgHc.MinorRevision = 0x00;
+ DwHc->DwUsbBase = BCM2836_USB_DW2_BASE_ADDRESS;
+
+ Pages = EFI_SIZE_TO_PAGES (DWC2_STATUS_BUF_SIZE);
+ DwHc->StatusBuffer = AllocatePages(Pages);
+ if (DwHc->StatusBuffer == NULL) {
+ DEBUG ((DEBUG_ERROR, "CreateDwUsbHc: No pages available for StatusBuffer\n"));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Pages = EFI_SIZE_TO_PAGES (DWC2_DATA_BUF_SIZE);
+ Status = DmaAllocateBuffer (EfiBootServicesData, Pages, (VOID **) &DwHc->AlignedBuffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "CreateDwUsbHc: DmaAllocateBuffer: %r\n", Status));
+ return Status;
+ }
+
+ BufferSize = EFI_PAGES_TO_SIZE (Pages);
+ Status = DmaMap (MapOperationBusMasterCommonBuffer, DwHc->AlignedBuffer, &BufferSize,
+ &DwHc->AlignedBufferBusAddress, &DwHc->AlignedBufferMapping);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "CreateDwUsbHc: DmaMap: %r\n", Status));
+ return Status;
+ }
+
+ InitializeListHead (&DwHc->DeferredList);
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ DwUsbHcExitBootService,
+ DwHc,
+ &gEfiEventExitBootServicesGuid,
+ &DwHc->ExitBootServiceEvent
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "CreateDwUsbHc: DwUsbHcExitBootService: %r\n", Status));
+ return Status;
+ }
+
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ DwHcPeriodicHandler,
+ DwHc, &DwHc->PeriodicEvent
+ );
+ if (Status != EFI_SUCCESS) {
+ DEBUG ((DEBUG_ERROR, "CreateDwUsbHc: DwHcPeriodicHandler: %r\n", Status));
+ return Status;
+ }
+
+ Status = gBS->SetTimer (DwHc->PeriodicEvent, TimerPeriodic,
+ EFI_TIMER_PERIOD_MILLISECONDS(1));
+ if (Status != EFI_SUCCESS) {
+ DEBUG ((DEBUG_ERROR, "CreateDwUsbHc: PeriodicEvent: %r\n", Status));
+ return Status;
+ }
+
+ *OutDwHc = DwHc;
+ return EFI_SUCCESS;
+}
+
+VOID
+DwHcQuiesce (
+ IN DWUSB_OTGHC_DEV *DwHc
+ )
+{
+ if (DwHc->PeriodicEvent != NULL) {
+ EFI_TPL PreviousTpl;
+ PreviousTpl = gBS->RaiseTPL(TPL_NOTIFY);
+ gBS->CloseEvent (DwHc->PeriodicEvent);
+ DwHc->PeriodicEvent = NULL;
+ gBS->RestoreTPL(PreviousTpl);
+ }
+
+ MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+ ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+ DWC2_HPRT0_PRTRST);
+
+ MicroSecondDelay (50000);
+
+ MmioWrite32 (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_CSFTRST);
+ MicroSecondDelay (100000);
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.h b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.h
new file mode 100644
index 000000000000..7916961e30fd
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.h
@@ -0,0 +1,159 @@
+/** @file
+ *
+ * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2015-2016, Linaro Limited. All rights reserved.
+ * Copyright (c) 2014 Marek Vasut <marex@denx.de>
+ * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ **/
+
+#ifndef _DWUSBHOSTDXE_H_
+#define _DWUSBHOSTDXE_H_
+
+#include <Uefi.h>
+
+#include <Protocol/RaspberryPiFirmware.h>
+#include <Protocol/Usb2HostController.h>
+#include <IndustryStandard/RpiFirmware.h>
+#include <IndustryStandard/Bcm2836.h>
+
+#include <Guid/EventGroup.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/PcdLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include <Library/DmaLib.h>
+#include <Library/ArmLib.h>
+#include <Utils.h>
+
+#define MAX_DEVICE 16
+#define MAX_ENDPOINT 16
+
+#define DWUSB_OTGHC_DEV_SIGNATURE SIGNATURE_32 ('d', 'w', 'h', 'c')
+#define DWHC_FROM_THIS(a) CR(a, DWUSB_OTGHC_DEV, DwUsbOtgHc, DWUSB_OTGHC_DEV_SIGNATURE)
+
+//
+// Iterate through the double linked list. NOT delete safe
+//
+#define EFI_LIST_FOR_EACH(Entry, ListHead) \
+ for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink)
+
+//
+// Iterate through the double linked list. This is delete-safe.
+// Do not touch NextEntry
+//
+#define EFI_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead) \
+ for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\
+ Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink)
+
+#define EFI_LIST_CONTAINER(Entry, Type, Field) BASE_CR(Entry, Type, Field)
+
+//
+// The RequestType in EFI_USB_DEVICE_REQUEST is composed of
+// three fields: One bit direction, 2 bit type, and 5 bit
+// target.
+//
+#define USB_REQUEST_TYPE(Dir, Type, Target) \
+ ((UINT8)((((Dir) == EfiUsbDataIn ? 0x01 : 0) << 7) | (Type) | (Target)))
+
+typedef struct {
+ VENDOR_DEVICE_PATH Custom;
+ EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
+} EFI_DW_DEVICE_PATH;
+
+typedef struct _DWUSB_DEFERRED_REQ {
+ IN OUT LIST_ENTRY List;
+ IN struct _DWUSB_OTGHC_DEV *DwHc;
+ IN UINT32 Channel;
+ IN UINT32 FrameInterval;
+ IN UINT32 TargetFrame;
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator;
+ IN UINT8 DeviceSpeed;
+ IN UINT8 DeviceAddress;
+ IN UINTN MaximumPacketLength;
+ IN UINT32 TransferDirection;
+ IN OUT VOID *Data;
+ IN OUT UINTN DataLength;
+ IN OUT UINT32 Pid;
+ IN UINT32 EpAddress;
+ IN UINT32 EpType;
+ OUT UINT32 TransferResult;
+ IN BOOLEAN IgnoreAck;
+ IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallbackFunction;
+ IN VOID *CallbackContext;
+ IN UINTN TimeOut;
+} DWUSB_DEFERRED_REQ;
+
+typedef struct _DWUSB_OTGHC_DEV {
+ UINTN Signature;
+
+ EFI_USB2_HC_PROTOCOL DwUsbOtgHc;
+
+ EFI_USB_HC_STATE DwHcState;
+
+ EFI_EVENT ExitBootServiceEvent;
+
+ EFI_EVENT PeriodicEvent;
+
+ EFI_PHYSICAL_ADDRESS DwUsbBase;
+ UINT8 *StatusBuffer;
+
+ UINT8 *AlignedBuffer;
+ VOID * AlignedBufferMapping;
+ UINTN AlignedBufferBusAddress;
+ LIST_ENTRY DeferredList;
+ /*
+ * 1ms frames.
+ */
+ UINTN CurrentFrame;
+ /*
+ * 125us frames;
+ */
+ UINT16 LastMicroFrame;
+} DWUSB_OTGHC_DEV;
+
+extern EFI_COMPONENT_NAME_PROTOCOL gComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gComponentName2;
+
+EFI_STATUS
+CreateDwUsbHc (
+ OUT DWUSB_OTGHC_DEV **OutDwHc
+ );
+
+VOID
+DestroyDwUsbHc (
+ IN DWUSB_OTGHC_DEV *Dev
+ );
+
+EFI_STATUS
+EFIAPI
+DwHcReset (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT16 Attributes
+ );
+
+EFI_STATUS
+EFIAPI
+DwHcSetState (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN EFI_USB_HC_STATE State
+ );
+
+VOID
+DwHcQuiesce (
+ IN DWUSB_OTGHC_DEV *DwHc
+ );
+
+#endif //_DWUSBHOSTDXE_H_
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf
new file mode 100644
index 000000000000..fd42875529b8
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf
@@ -0,0 +1,52 @@
+#/** @file
+#
+# Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2015-2016, Linaro Limited. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DwUsbHostDxe
+ FILE_GUID = 4bf1704c-03f4-46d5-bca6-82fa580badfd
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = DwUsbHostEntryPoint
+
+[Sources.common]
+ DwUsbHostDxe.c
+ DriverBinding.c
+ ComponentName.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ MemoryAllocationLib
+ BaseLib
+ UefiLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ BaseMemoryLib
+ DebugLib
+ ReportStatusCodeLib
+ TimerLib
+ DmaLib
+ IoLib
+
+[Guids]
+ gEfiEventExitBootServicesGuid
+
+[Protocols]
+ gEfiDriverBindingProtocolGuid
+ gEfiUsb2HcProtocolGuid
+ gRaspberryPiFirmwareProtocolGuid
+
+[Depex]
+ gRaspberryPiFirmwareProtocolGuid
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h
new file mode 100644
index 000000000000..e64010f220ba
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h
@@ -0,0 +1,782 @@
+/** @file
+ *
+ * Copyright (c) 2017, Andrey Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2015-2016, Linaro Limited. All rights reserved.
+ * Copyright (c) 2014 Marek Vasut <marex@denx.de>
+ * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ **/
+
+#ifndef __DWCHW_H__
+#define __DWCHW_H__
+
+#define HSOTG_REG(x) (x)
+
+#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch))
+#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch))
+#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch))
+#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch))
+#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch))
+#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch))
+#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch))
+
+#define HCFG HSOTG_REG(0x0400)
+#define HFIR HSOTG_REG(0x0404)
+#define HFNUM HSOTG_REG(0x0408)
+#define HPTXSTS HSOTG_REG(0x0410)
+#define HAINT HSOTG_REG(0x0414)
+#define HAINTMSK HSOTG_REG(0x0418)
+#define HFLBADDR HSOTG_REG(0x041c)
+
+#define GOTGCTL HSOTG_REG(0x000) // OTG control and status
+#define GOTGINT HSOTG_REG(0x004) // OTG interrupt
+#define GAHBCFG HSOTG_REG(0x008) // AHB config
+#define GUSBCFG HSOTG_REG(0x00C) // Core USB config
+#define GRSTCTL HSOTG_REG(0x010) // Core Reset
+#define GINTSTS HSOTG_REG(0x014) // Core Interrupt
+#define GINTMSK HSOTG_REG(0x018) // Core Interrupt Mask
+#define GRXSTSR HSOTG_REG(0x01C) // Receive Status Queue Read
+#define GRXSTSP HSOTG_REG(0x020) // Receive Status Queue Read and POP
+#define GRXFSIZ HSOTG_REG(0x024) // Receive FIFO Size
+#define GNPTXFSIZ HSOTG_REG(0x028) // Non-periodic TX FIFO Size
+#define GNPTXSTS HSOTG_REG(0x02C) // Non-periodic TX FIFO/Queue Status
+#define GI2CCTL HSOTG_REG(0x0030) // I2C access
+#define GPVNDCTL HSOTG_REG(0x0034) // PHY vendor control
+#define GGPIO HSOTG_REG(0x0038) // GPIO
+#define GUID HSOTG_REG(0x003c) // User ID
+#define GSNPSID HSOTG_REG(0x0040) // Synopsis ID
+#define GHWCFG1 HSOTG_REG(0x0044) // User HW Config1
+#define GHWCFG2 HSOTG_REG(0x0048) // User HW Config2
+#define GHWCFG3 HSOTG_REG(0x004c) // User HW Config3
+#define GHWCFG4 HSOTG_REG(0x0050) // User HW Config4
+#define GLPMCFG HSOTG_REG(0x0054) // Core LPM config
+#define HPTXFSIZ HSOTG_REG(0x100) // Host periodic TX FIFO Size
+#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4))
+#define HPRT0 HSOTG_REG(0x0440)
+#define PCGCCTL HSOTG_REG(0xE00)
+
+#define DWC2_GOTGCTL_SESREQSCS (1 << 0)
+#define DWC2_GOTGCTL_SESREQSCS_OFFSET 0
+#define DWC2_GOTGCTL_SESREQ (1 << 1)
+#define DWC2_GOTGCTL_SESREQ_OFFSET 1
+#define DWC2_GOTGCTL_HSTNEGSCS (1 << 8)
+#define DWC2_GOTGCTL_HSTNEGSCS_OFFSET 8
+#define DWC2_GOTGCTL_HNPREQ (1 << 9)
+#define DWC2_GOTGCTL_HNPREQ_OFFSET 9
+#define DWC2_GOTGCTL_HSTSETHNPEN (1 << 10)
+#define DWC2_GOTGCTL_HSTSETHNPEN_OFFSET 10
+#define DWC2_GOTGCTL_DEVHNPEN (1 << 11)
+#define DWC2_GOTGCTL_DEVHNPEN_OFFSET 11
+#define DWC2_GOTGCTL_CONIDSTS (1 << 16)
+#define DWC2_GOTGCTL_CONIDSTS_OFFSET 16
+#define DWC2_GOTGCTL_DBNCTIME (1 << 17)
+#define DWC2_GOTGCTL_DBNCTIME_OFFSET 17
+#define DWC2_GOTGCTL_ASESVLD (1 << 18)
+#define DWC2_GOTGCTL_ASESVLD_OFFSET 18
+#define DWC2_GOTGCTL_BSESVLD (1 << 19)
+#define DWC2_GOTGCTL_BSESVLD_OFFSET 19
+#define DWC2_GOTGCTL_OTGVER (1 << 20)
+#define DWC2_GOTGCTL_OTGVER_OFFSET 20
+#define DWC2_GOTGINT_SESENDDET (1 << 2)
+#define DWC2_GOTGINT_SESENDDET_OFFSET 2
+#define DWC2_GOTGINT_SESREQSUCSTSCHNG (1 << 8)
+#define DWC2_GOTGINT_SESREQSUCSTSCHNG_OFFSET 8
+#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG (1 << 9)
+#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG_OFFSET 9
+#define DWC2_GOTGINT_RESERVER10_16_MASK (0x7F << 10)
+#define DWC2_GOTGINT_RESERVER10_16_OFFSET 10
+#define DWC2_GOTGINT_HSTNEGDET (1 << 17)
+#define DWC2_GOTGINT_HSTNEGDET_OFFSET 17
+#define DWC2_GOTGINT_ADEVTOUTCHNG (1 << 18)
+#define DWC2_GOTGINT_ADEVTOUTCHNG_OFFSET 18
+#define DWC2_GOTGINT_DEBDONE (1 << 19)
+#define DWC2_GOTGINT_DEBDONE_OFFSET 19
+#define DWC2_GAHBCFG_GLBLINTRMSK (1 << 0)
+#define DWC2_GAHBCFG_GLBLINTRMSK_OFFSET 0
+#define DWC2_GAHBCFG_AXI_BURST4_MASK (3 << 1)
+#define DWC2_GAHBCFG_WAIT_AXI_WRITES (1 << 4)
+#define DWC2_GAHBCFG_DMAENABLE (1 << 5)
+#define DWC2_GAHBCFG_DMAENABLE_OFFSET 5
+#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL (1 << 7)
+#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL_OFFSET 7
+#define DWC2_GAHBCFG_PTXFEMPLVL (1 << 8)
+#define DWC2_GAHBCFG_PTXFEMPLVL_OFFSET 8
+#define DWC2_GUSBCFG_TOUTCAL_MASK (0x7 << 0)
+#define DWC2_GUSBCFG_TOUTCAL_OFFSET 0
+#define DWC2_GUSBCFG_PHYIF (1 << 3)
+#define DWC2_GUSBCFG_PHYIF_OFFSET 3
+#define DWC2_GUSBCFG_ULPI_UTMI_SEL (1 << 4)
+#define DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET 4
+#define DWC2_GUSBCFG_FSINTF (1 << 5)
+#define DWC2_GUSBCFG_FSINTF_OFFSET 5
+#define DWC2_GUSBCFG_PHYSEL (1 << 6)
+#define DWC2_GUSBCFG_PHYSEL_OFFSET 6
+#define DWC2_GUSBCFG_DDRSEL (1 << 7)
+#define DWC2_GUSBCFG_DDRSEL_OFFSET 7
+#define DWC2_GUSBCFG_SRPCAP (1 << 8)
+#define DWC2_GUSBCFG_SRPCAP_OFFSET 8
+#define DWC2_GUSBCFG_HNPCAP (1 << 9)
+#define DWC2_GUSBCFG_HNPCAP_OFFSET 9
+#define DWC2_GUSBCFG_USBTRDTIM_MASK (0xF << 10)
+#define DWC2_GUSBCFG_USBTRDTIM_OFFSET 10
+#define DWC2_GUSBCFG_NPTXFRWNDEN (1 << 14)
+#define DWC2_GUSBCFG_NPTXFRWNDEN_OFFSET 14
+#define DWC2_GUSBCFG_PHYLPWRCLKSEL (1 << 15)
+#define DWC2_GUSBCFG_PHYLPWRCLKSEL_OFFSET 15
+#define DWC2_GUSBCFG_OTGUTMIFSSEL (1 << 16)
+#define DWC2_GUSBCFG_OTGUTMIFSSEL_OFFSET 16
+#define DWC2_GUSBCFG_ULPI_FSLS (1 << 17)
+#define DWC2_GUSBCFG_ULPI_FSLS_OFFSET 17
+#define DWC2_GUSBCFG_ULPI_AUTO_RES (1 << 18)
+#define DWC2_GUSBCFG_ULPI_AUTO_RES_OFFSET 18
+#define DWC2_GUSBCFG_ULPI_CLK_SUS_M (1 << 19)
+#define DWC2_GUSBCFG_ULPI_CLK_SUS_M_OFFSET 19
+#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV (1 << 20)
+#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV_OFFSET 20
+#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR (1 << 21)
+#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR_OFFSET 21
+#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE (1 << 22)
+#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE_OFFSET 22
+#define DWC2_GUSBCFG_IC_USB_CAP (1 << 26)
+#define DWC2_GUSBCFG_IC_USB_CAP_OFFSET 26
+#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE (1 << 27)
+#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE_OFFSET 27
+#define DWC2_GUSBCFG_TX_END_DELAY (1 << 28)
+#define DWC2_GUSBCFG_TX_END_DELAY_OFFSET 28
+#define DWC2_GUSBCFG_FORCEHOSTMODE (1 << 29)
+#define DWC2_GUSBCFG_FORCEHOSTMODE_OFFSET 29
+#define DWC2_GUSBCFG_FORCEDEVMODE (1 << 30)
+#define DWC2_GUSBCFG_FORCEDEVMODE_OFFSET 30
+#define DWC2_GLPMCTL_LPM_CAP_EN (1 << 0)
+#define DWC2_GLPMCTL_LPM_CAP_EN_OFFSET 0
+#define DWC2_GLPMCTL_APPL_RESP (1 << 1)
+#define DWC2_GLPMCTL_APPL_RESP_OFFSET 1
+#define DWC2_GLPMCTL_HIRD_MASK (0xF << 2)
+#define DWC2_GLPMCTL_HIRD_OFFSET 2
+#define DWC2_GLPMCTL_REM_WKUP_EN (1 << 6)
+#define DWC2_GLPMCTL_REM_WKUP_EN_OFFSET 6
+#define DWC2_GLPMCTL_EN_UTMI_SLEEP (1 << 7)
+#define DWC2_GLPMCTL_EN_UTMI_SLEEP_OFFSET 7
+#define DWC2_GLPMCTL_HIRD_THRES_MASK (0x1F << 8)
+#define DWC2_GLPMCTL_HIRD_THRES_OFFSET 8
+#define DWC2_GLPMCTL_LPM_RESP_MASK (0x3 << 13)
+#define DWC2_GLPMCTL_LPM_RESP_OFFSET 13
+#define DWC2_GLPMCTL_PRT_SLEEP_STS (1 << 15)
+#define DWC2_GLPMCTL_PRT_SLEEP_STS_OFFSET 15
+#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK (1 << 16)
+#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK_OFFSET 16
+#define DWC2_GLPMCTL_LPM_CHAN_INDEX_MASK (0xF << 17)
+#define DWC2_GLPMCTL_LPM_CHAN_INDEX_OFFSET 17
+#define DWC2_GLPMCTL_RETRY_COUNT_MASK (0x7 << 21)
+#define DWC2_GLPMCTL_RETRY_COUNT_OFFSET 21
+#define DWC2_GLPMCTL_SEND_LPM (1 << 24)
+#define DWC2_GLPMCTL_SEND_LPM_OFFSET 24
+#define DWC2_GLPMCTL_RETRY_COUNT_STS_MASK (0x7 << 25)
+#define DWC2_GLPMCTL_RETRY_COUNT_STS_OFFSET 25
+#define DWC2_GLPMCTL_HSIC_CONNECT (1 << 30)
+#define DWC2_GLPMCTL_HSIC_CONNECT_OFFSET 30
+#define DWC2_GLPMCTL_INV_SEL_HSIC (1 << 31)
+#define DWC2_GLPMCTL_INV_SEL_HSIC_OFFSET 31
+#define DWC2_GRSTCTL_CSFTRST (1 << 0)
+#define DWC2_GRSTCTL_CSFTRST_OFFSET 0
+#define DWC2_GRSTCTL_HSFTRST (1 << 1)
+#define DWC2_GRSTCTL_HSFTRST_OFFSET 1
+#define DWC2_GRSTCTL_HSTFRM (1 << 2)
+#define DWC2_GRSTCTL_HSTFRM_OFFSET 2
+#define DWC2_GRSTCTL_INTKNQFLSH (1 << 3)
+#define DWC2_GRSTCTL_INTKNQFLSH_OFFSET 3
+#define DWC2_GRSTCTL_RXFFLSH (1 << 4)
+#define DWC2_GRSTCTL_RXFFLSH_OFFSET 4
+#define DWC2_GRSTCTL_TXFFLSH (1 << 5)
+#define DWC2_GRSTCTL_TXFFLSH_OFFSET 5
+#define DWC2_GRSTCTL_TXFNUM_MASK (0x1F << 6)
+#define DWC2_GRSTCTL_TXFNUM_OFFSET 6
+#define DWC2_GRSTCTL_DMAREQ (1 << 30)
+#define DWC2_GRSTCTL_DMAREQ_OFFSET 30
+#define DWC2_GRSTCTL_AHBIDLE (1 << 31)
+#define DWC2_GRSTCTL_AHBIDLE_OFFSET 31
+#define DWC2_GINTMSK_MODEMISMATCH (1 << 1)
+#define DWC2_GINTMSK_MODEMISMATCH_OFFSET 1
+#define DWC2_GINTMSK_OTGINTR (1 << 2)
+#define DWC2_GINTMSK_OTGINTR_OFFSET 2
+#define DWC2_GINTMSK_SOFINTR (1 << 3)
+#define DWC2_GINTMSK_SOFINTR_OFFSET 3
+#define DWC2_GINTMSK_RXSTSQLVL (1 << 4)
+#define DWC2_GINTMSK_RXSTSQLVL_OFFSET 4
+#define DWC2_GINTMSK_NPTXFEMPTY (1 << 5)
+#define DWC2_GINTMSK_NPTXFEMPTY_OFFSET 5
+#define DWC2_GINTMSK_GINNAKEFF (1 << 6)
+#define DWC2_GINTMSK_GINNAKEFF_OFFSET 6
+#define DWC2_GINTMSK_GOUTNAKEFF (1 << 7)
+#define DWC2_GINTMSK_GOUTNAKEFF_OFFSET 7
+#define DWC2_GINTMSK_I2CINTR (1 << 9)
+#define DWC2_GINTMSK_I2CINTR_OFFSET 9
+#define DWC2_GINTMSK_ERLYSUSPEND (1 << 10)
+#define DWC2_GINTMSK_ERLYSUSPEND_OFFSET 10
+#define DWC2_GINTMSK_USBSUSPEND (1 << 11)
+#define DWC2_GINTMSK_USBSUSPEND_OFFSET 11
+#define DWC2_GINTMSK_USBRESET (1 << 12)
+#define DWC2_GINTMSK_USBRESET_OFFSET 12
+#define DWC2_GINTMSK_ENUMDONE (1 << 13)
+#define DWC2_GINTMSK_ENUMDONE_OFFSET 13
+#define DWC2_GINTMSK_ISOOUTDROP (1 << 14)
+#define DWC2_GINTMSK_ISOOUTDROP_OFFSET 14
+#define DWC2_GINTMSK_EOPFRAME (1 << 15)
+#define DWC2_GINTMSK_EOPFRAME_OFFSET 15
+#define DWC2_GINTMSK_EPMISMATCH (1 << 17)
+#define DWC2_GINTMSK_EPMISMATCH_OFFSET 17
+#define DWC2_GINTMSK_INEPINTR (1 << 18)
+#define DWC2_GINTMSK_INEPINTR_OFFSET 18
+#define DWC2_GINTMSK_OUTEPINTR (1 << 19)
+#define DWC2_GINTMSK_OUTEPINTR_OFFSET 19
+#define DWC2_GINTMSK_INCOMPLISOIN (1 << 20)
+#define DWC2_GINTMSK_INCOMPLISOIN_OFFSET 20
+#define DWC2_GINTMSK_INCOMPLISOOUT (1 << 21)
+#define DWC2_GINTMSK_INCOMPLISOOUT_OFFSET 21
+#define DWC2_GINTMSK_PORTINTR (1 << 24)
+#define DWC2_GINTMSK_PORTINTR_OFFSET 24
+#define DWC2_GINTMSK_HCINTR (1 << 25)
+#define DWC2_GINTMSK_HCINTR_OFFSET 25
+#define DWC2_GINTMSK_PTXFEMPTY (1 << 26)
+#define DWC2_GINTMSK_PTXFEMPTY_OFFSET 26
+#define DWC2_GINTMSK_LPMTRANRCVD (1 << 27)
+#define DWC2_GINTMSK_LPMTRANRCVD_OFFSET 27
+#define DWC2_GINTMSK_CONIDSTSCHNG (1 << 28)
+#define DWC2_GINTMSK_CONIDSTSCHNG_OFFSET 28
+#define DWC2_GINTMSK_DISCONNECT (1 << 29)
+#define DWC2_GINTMSK_DISCONNECT_OFFSET 29
+#define DWC2_GINTMSK_SESSREQINTR (1 << 30)
+#define DWC2_GINTMSK_SESSREQINTR_OFFSET 30
+#define DWC2_GINTMSK_WKUPINTR (1 << 31)
+#define DWC2_GINTMSK_WKUPINTR_OFFSET 31
+#define DWC2_GINTSTS_CURMODE_DEVICE (0 << 0)
+#define DWC2_GINTSTS_CURMODE_HOST (1 << 0)
+#define DWC2_GINTSTS_CURMODE (1 << 0)
+#define DWC2_GINTSTS_CURMODE_OFFSET 0
+#define DWC2_GINTSTS_MODEMISMATCH (1 << 1)
+#define DWC2_GINTSTS_MODEMISMATCH_OFFSET 1
+#define DWC2_GINTSTS_OTGINTR (1 << 2)
+#define DWC2_GINTSTS_OTGINTR_OFFSET 2
+#define DWC2_GINTSTS_SOFINTR (1 << 3)
+#define DWC2_GINTSTS_SOFINTR_OFFSET 3
+#define DWC2_GINTSTS_RXSTSQLVL (1 << 4)
+#define DWC2_GINTSTS_RXSTSQLVL_OFFSET 4
+#define DWC2_GINTSTS_NPTXFEMPTY (1 << 5)
+#define DWC2_GINTSTS_NPTXFEMPTY_OFFSET 5
+#define DWC2_GINTSTS_GINNAKEFF (1 << 6)
+#define DWC2_GINTSTS_GINNAKEFF_OFFSET 6
+#define DWC2_GINTSTS_GOUTNAKEFF (1 << 7)
+#define DWC2_GINTSTS_GOUTNAKEFF_OFFSET 7
+#define DWC2_GINTSTS_I2CINTR (1 << 9)
+#define DWC2_GINTSTS_I2CINTR_OFFSET 9
+#define DWC2_GINTSTS_ERLYSUSPEND (1 << 10)
+#define DWC2_GINTSTS_ERLYSUSPEND_OFFSET 10
+#define DWC2_GINTSTS_USBSUSPEND (1 << 11)
+#define DWC2_GINTSTS_USBSUSPEND_OFFSET 11
+#define DWC2_GINTSTS_USBRESET (1 << 12)
+#define DWC2_GINTSTS_USBRESET_OFFSET 12
+#define DWC2_GINTSTS_ENUMDONE (1 << 13)
+#define DWC2_GINTSTS_ENUMDONE_OFFSET 13
+#define DWC2_GINTSTS_ISOOUTDROP (1 << 14)
+#define DWC2_GINTSTS_ISOOUTDROP_OFFSET 14
+#define DWC2_GINTSTS_EOPFRAME (1 << 15)
+#define DWC2_GINTSTS_EOPFRAME_OFFSET 15
+#define DWC2_GINTSTS_INTOKENRX (1 << 16)
+#define DWC2_GINTSTS_INTOKENRX_OFFSET 16
+#define DWC2_GINTSTS_EPMISMATCH (1 << 17)
+#define DWC2_GINTSTS_EPMISMATCH_OFFSET 17
+#define DWC2_GINTSTS_INEPINT (1 << 18)
+#define DWC2_GINTSTS_INEPINT_OFFSET 18
+#define DWC2_GINTSTS_OUTEPINTR (1 << 19)
+#define DWC2_GINTSTS_OUTEPINTR_OFFSET 19
+#define DWC2_GINTSTS_INCOMPLISOIN (1 << 20)
+#define DWC2_GINTSTS_INCOMPLISOIN_OFFSET 20
+#define DWC2_GINTSTS_INCOMPLISOOUT (1 << 21)
+#define DWC2_GINTSTS_INCOMPLISOOUT_OFFSET 21
+#define DWC2_GINTSTS_PORTINTR (1 << 24)
+#define DWC2_GINTSTS_PORTINTR_OFFSET 24
+#define DWC2_GINTSTS_HCINTR (1 << 25)
+#define DWC2_GINTSTS_HCINTR_OFFSET 25
+#define DWC2_GINTSTS_PTXFEMPTY (1 << 26)
+#define DWC2_GINTSTS_PTXFEMPTY_OFFSET 26
+#define DWC2_GINTSTS_LPMTRANRCVD (1 << 27)
+#define DWC2_GINTSTS_LPMTRANRCVD_OFFSET 27
+#define DWC2_GINTSTS_CONIDSTSCHNG (1 << 28)
+#define DWC2_GINTSTS_CONIDSTSCHNG_OFFSET 28
+#define DWC2_GINTSTS_DISCONNECT (1 << 29)
+#define DWC2_GINTSTS_DISCONNECT_OFFSET 29
+#define DWC2_GINTSTS_SESSREQINTR (1 << 30)
+#define DWC2_GINTSTS_SESSREQINTR_OFFSET 30
+#define DWC2_GINTSTS_WKUPINTR (1 << 31)
+#define DWC2_GINTSTS_WKUPINTR_OFFSET 31
+#define DWC2_GRXSTS_EPNUM_MASK (0xF << 0)
+#define DWC2_GRXSTS_EPNUM_OFFSET 0
+#define DWC2_GRXSTS_BCNT_MASK (0x7FF << 4)
+#define DWC2_GRXSTS_BCNT_OFFSET 4
+#define DWC2_GRXSTS_DPID_MASK (0x3 << 15)
+#define DWC2_GRXSTS_DPID_OFFSET 15
+#define DWC2_GRXSTS_PKTSTS_MASK (0xF << 17)
+#define DWC2_GRXSTS_PKTSTS_OFFSET 17
+#define DWC2_GRXSTS_FN_MASK (0xF << 21)
+#define DWC2_GRXSTS_FN_OFFSET 21
+#define DWC2_FIFOSIZE_STARTADDR_MASK (0xFFFF << 0)
+#define DWC2_FIFOSIZE_STARTADDR_OFFSET 0
+#define DWC2_FIFOSIZE_DEPTH_MASK (0xFFFF << 16)
+#define DWC2_FIFOSIZE_DEPTH_OFFSET 16
+#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_MASK (0xFFFF << 0)
+#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_OFFSET 0
+#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_MASK (0xFF << 16)
+#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_OFFSET 16
+#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE (1 << 24)
+#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE_OFFSET 24
+#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_MASK (0x3 << 25)
+#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_OFFSET 25
+#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_MASK (0xF << 27)
+#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_OFFSET 27
+#define DWC2_DTXFSTS_TXFSPCAVAIL_MASK (0xFFFF << 0)
+#define DWC2_DTXFSTS_TXFSPCAVAIL_OFFSET 0
+#define DWC2_GI2CCTL_RWDATA_MASK (0xFF << 0)
+#define DWC2_GI2CCTL_RWDATA_OFFSET 0
+#define DWC2_GI2CCTL_REGADDR_MASK (0xFF << 8)
+#define DWC2_GI2CCTL_REGADDR_OFFSET 8
+#define DWC2_GI2CCTL_ADDR_MASK (0x7F << 16)
+#define DWC2_GI2CCTL_ADDR_OFFSET 16
+#define DWC2_GI2CCTL_I2CEN (1 << 23)
+#define DWC2_GI2CCTL_I2CEN_OFFSET 23
+#define DWC2_GI2CCTL_ACK (1 << 24)
+#define DWC2_GI2CCTL_ACK_OFFSET 24
+#define DWC2_GI2CCTL_I2CSUSPCTL (1 << 25)
+#define DWC2_GI2CCTL_I2CSUSPCTL_OFFSET 25
+#define DWC2_GI2CCTL_I2CDEVADDR_MASK (0x3 << 26)
+#define DWC2_GI2CCTL_I2CDEVADDR_OFFSET 26
+#define DWC2_GI2CCTL_RW (1 << 30)
+#define DWC2_GI2CCTL_RW_OFFSET 30
+#define DWC2_GI2CCTL_BSYDNE (1 << 31)
+#define DWC2_GI2CCTL_BSYDNE_OFFSET 31
+#define DWC2_HWCFG1_EP_DIR0_MASK (0x3 << 0)
+#define DWC2_HWCFG1_EP_DIR0_OFFSET 0
+#define DWC2_HWCFG1_EP_DIR1_MASK (0x3 << 2)
+#define DWC2_HWCFG1_EP_DIR1_OFFSET 2
+#define DWC2_HWCFG1_EP_DIR2_MASK (0x3 << 4)
+#define DWC2_HWCFG1_EP_DIR2_OFFSET 4
+#define DWC2_HWCFG1_EP_DIR3_MASK (0x3 << 6)
+#define DWC2_HWCFG1_EP_DIR3_OFFSET 6
+#define DWC2_HWCFG1_EP_DIR4_MASK (0x3 << 8)
+#define DWC2_HWCFG1_EP_DIR4_OFFSET 8
+#define DWC2_HWCFG1_EP_DIR5_MASK (0x3 << 10)
+#define DWC2_HWCFG1_EP_DIR5_OFFSET 10
+#define DWC2_HWCFG1_EP_DIR6_MASK (0x3 << 12)
+#define DWC2_HWCFG1_EP_DIR6_OFFSET 12
+#define DWC2_HWCFG1_EP_DIR7_MASK (0x3 << 14)
+#define DWC2_HWCFG1_EP_DIR7_OFFSET 14
+#define DWC2_HWCFG1_EP_DIR8_MASK (0x3 << 16)
+#define DWC2_HWCFG1_EP_DIR8_OFFSET 16
+#define DWC2_HWCFG1_EP_DIR9_MASK (0x3 << 18)
+#define DWC2_HWCFG1_EP_DIR9_OFFSET 18
+#define DWC2_HWCFG1_EP_DIR10_MASK (0x3 << 20)
+#define DWC2_HWCFG1_EP_DIR10_OFFSET 20
+#define DWC2_HWCFG1_EP_DIR11_MASK (0x3 << 22)
+#define DWC2_HWCFG1_EP_DIR11_OFFSET 22
+#define DWC2_HWCFG1_EP_DIR12_MASK (0x3 << 24)
+#define DWC2_HWCFG1_EP_DIR12_OFFSET 24
+#define DWC2_HWCFG1_EP_DIR13_MASK (0x3 << 26)
+#define DWC2_HWCFG1_EP_DIR13_OFFSET 26
+#define DWC2_HWCFG1_EP_DIR14_MASK (0x3 << 28)
+#define DWC2_HWCFG1_EP_DIR14_OFFSET 28
+#define DWC2_HWCFG1_EP_DIR15_MASK (0x3 << 30)
+#define DWC2_HWCFG1_EP_DIR15_OFFSET 30
+#define DWC2_HWCFG2_OP_MODE_MASK (0x7 << 0)
+#define DWC2_HWCFG2_OP_MODE_OFFSET 0
+#define DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY (0x0 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_EXT_DMA (0x1 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_INT_DMA (0x2 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_MASK (0x3 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_OFFSET 3
+#define DWC2_HWCFG2_POINT2POINT (1 << 5)
+#define DWC2_HWCFG2_POINT2POINT_OFFSET 5
+#define DWC2_HWCFG2_HS_PHY_TYPE_MASK (0x3 << 6)
+#define DWC2_HWCFG2_HS_PHY_TYPE_OFFSET 6
+#define DWC2_HWCFG2_FS_PHY_TYPE_MASK (0x3 << 8)
+#define DWC2_HWCFG2_FS_PHY_TYPE_OFFSET 8
+#define DWC2_HWCFG2_NUM_DEV_EP_MASK (0xF << 10)
+#define DWC2_HWCFG2_NUM_DEV_EP_OFFSET 10
+#define DWC2_HWCFG2_NUM_HOST_CHAN_MASK (0xF << 14)
+#define DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET 14
+#define DWC2_HWCFG2_PERIO_EP_SUPPORTED (1 << 18)
+#define DWC2_HWCFG2_PERIO_EP_SUPPORTED_OFFSET 18
+#define DWC2_HWCFG2_DYNAMIC_FIFO (1 << 19)
+#define DWC2_HWCFG2_DYNAMIC_FIFO_OFFSET 19
+#define DWC2_HWCFG2_MULTI_PROC_INT (1 << 20)
+#define DWC2_HWCFG2_MULTI_PROC_INT_OFFSET 20
+#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22)
+#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_OFFSET 22
+#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24)
+#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_OFFSET 24
+#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1F << 26)
+#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_OFFSET 26
+#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xF << 0)
+#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_OFFSET 0
+#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4)
+#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_OFFSET 4
+#define DWC2_HWCFG3_OTG_FUNC (1 << 7)
+#define DWC2_HWCFG3_OTG_FUNC_OFFSET 7
+#define DWC2_HWCFG3_I2C (1 << 8)
+#define DWC2_HWCFG3_I2C_OFFSET 8
+#define DWC2_HWCFG3_VENDOR_CTRL_IF (1 << 9)
+#define DWC2_HWCFG3_VENDOR_CTRL_IF_OFFSET 9
+#define DWC2_HWCFG3_OPTIONAL_FEATURES (1 << 10)
+#define DWC2_HWCFG3_OPTIONAL_FEATURES_OFFSET 10
+#define DWC2_HWCFG3_SYNCH_RESET_TYPE (1 << 11)
+#define DWC2_HWCFG3_SYNCH_RESET_TYPE_OFFSET 11
+#define DWC2_HWCFG3_OTG_ENABLE_IC_USB (1 << 12)
+#define DWC2_HWCFG3_OTG_ENABLE_IC_USB_OFFSET 12
+#define DWC2_HWCFG3_OTG_ENABLE_HSIC (1 << 13)
+#define DWC2_HWCFG3_OTG_ENABLE_HSIC_OFFSET 13
+#define DWC2_HWCFG3_OTG_LPM_EN (1 << 15)
+#define DWC2_HWCFG3_OTG_LPM_EN_OFFSET 15
+#define DWC2_HWCFG3_DFIFO_DEPTH_MASK (0xFFFF << 16)
+#define DWC2_HWCFG3_DFIFO_DEPTH_OFFSET 16
+#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xF << 0)
+#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_OFFSET 0
+#define DWC2_HWCFG4_POWER_OPTIMIZ (1 << 4)
+#define DWC2_HWCFG4_POWER_OPTIMIZ_OFFSET 4
+#define DWC2_HWCFG4_MIN_AHB_FREQ_MASK (0x1FF << 5)
+#define DWC2_HWCFG4_MIN_AHB_FREQ_OFFSET 5
+#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14)
+#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_OFFSET 14
+#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xF << 16)
+#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_OFFSET 16
+#define DWC2_HWCFG4_IDDIG_FILT_EN (1 << 20)
+#define DWC2_HWCFG4_IDDIG_FILT_EN_OFFSET 20
+#define DWC2_HWCFG4_VBUS_VALID_FILT_EN (1 << 21)
+#define DWC2_HWCFG4_VBUS_VALID_FILT_EN_OFFSET 21
+#define DWC2_HWCFG4_A_VALID_FILT_EN (1 << 22)
+#define DWC2_HWCFG4_A_VALID_FILT_EN_OFFSET 22
+#define DWC2_HWCFG4_B_VALID_FILT_EN (1 << 23)
+#define DWC2_HWCFG4_B_VALID_FILT_EN_OFFSET 23
+#define DWC2_HWCFG4_SESSION_END_FILT_EN (1 << 24)
+#define DWC2_HWCFG4_SESSION_END_FILT_EN_OFFSET 24
+#define DWC2_HWCFG4_DED_FIFO_EN (1 << 25)
+#define DWC2_HWCFG4_DED_FIFO_EN_OFFSET 25
+#define DWC2_HWCFG4_NUM_IN_EPS_MASK (0xF << 26)
+#define DWC2_HWCFG4_NUM_IN_EPS_OFFSET 26
+#define DWC2_HWCFG4_DESC_DMA (1 << 30)
+#define DWC2_HWCFG4_DESC_DMA_OFFSET 30
+#define DWC2_HWCFG4_DESC_DMA_DYN (1 << 31)
+#define DWC2_HWCFG4_DESC_DMA_DYN_OFFSET 31
+#define DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ 0
+#define DWC2_HCFG_FSLSPCLKSEL_48_MHZ 1
+#define DWC2_HCFG_FSLSPCLKSEL_6_MHZ 2
+#define DWC2_HCFG_FSLSPCLKSEL_MASK (0x3 << 0)
+#define DWC2_HCFG_FSLSPCLKSEL_OFFSET 0
+#define DWC2_HCFG_FSLSSUPP (1 << 2)
+#define DWC2_HCFG_FSLSSUPP_OFFSET 2
+#define DWC2_HCFG_DESCDMA (1 << 23)
+#define DWC2_HCFG_DESCDMA_OFFSET 23
+#define DWC2_HCFG_FRLISTEN_MASK (0x3 << 24)
+#define DWC2_HCFG_FRLISTEN_OFFSET 24
+#define DWC2_HCFG_PERSCHEDENA (1 << 26)
+#define DWC2_HCFG_PERSCHEDENA_OFFSET 26
+#define DWC2_HCFG_PERSCHEDSTAT (1 << 27)
+#define DWC2_HCFG_PERSCHEDSTAT_OFFSET 27
+#define DWC2_HFIR_FRINT_MASK (0xFFFF << 0)
+#define DWC2_HFIR_FRINT_OFFSET 0
+#define DWC2_HFNUM_FRNUM_MASK (0x3FFF << 0)
+#define DWC2_HFNUM_FRNUM_OFFSET 0
+#define DWC2_HFNUM_FRREM_MASK (0xFFFF << 16)
+#define DWC2_HFNUM_FRREM_OFFSET 16
+#define DWC2_HPTXSTS_PTXFSPCAVAIL_MASK (0xFFFF << 0)
+#define DWC2_HPTXSTS_PTXFSPCAVAIL_OFFSET 0
+#define DWC2_HPTXSTS_PTXQSPCAVAIL_MASK (0xFF << 16)
+#define DWC2_HPTXSTS_PTXQSPCAVAIL_OFFSET 16
+#define DWC2_HPTXSTS_PTXQTOP_TERMINATE (1 << 24)
+#define DWC2_HPTXSTS_PTXQTOP_TERMINATE_OFFSET 24
+#define DWC2_HPTXSTS_PTXQTOP_TOKEN_MASK (0x3 << 25)
+#define DWC2_HPTXSTS_PTXQTOP_TOKEN_OFFSET 25
+#define DWC2_HPTXSTS_PTXQTOP_CHNUM_MASK (0xF << 27)
+#define DWC2_HPTXSTS_PTXQTOP_CHNUM_OFFSET 27
+#define DWC2_HPTXSTS_PTXQTOP_ODD (1 << 31)
+#define DWC2_HPTXSTS_PTXQTOP_ODD_OFFSET 31
+#define DWC2_HPRT0_PRTCONNSTS (1 << 0)
+#define DWC2_HPRT0_PRTCONNSTS_OFFSET 0
+#define DWC2_HPRT0_PRTCONNDET (1 << 1)
+#define DWC2_HPRT0_PRTCONNDET_OFFSET 1
+#define DWC2_HPRT0_PRTENA (1 << 2)
+#define DWC2_HPRT0_PRTENA_OFFSET 2
+#define DWC2_HPRT0_PRTENCHNG (1 << 3)
+#define DWC2_HPRT0_PRTENCHNG_OFFSET 3
+#define DWC2_HPRT0_PRTOVRCURRACT (1 << 4)
+#define DWC2_HPRT0_PRTOVRCURRACT_OFFSET 4
+#define DWC2_HPRT0_PRTOVRCURRCHNG (1 << 5)
+#define DWC2_HPRT0_PRTOVRCURRCHNG_OFFSET 5
+#define DWC2_HPRT0_PRTRES (1 << 6)
+#define DWC2_HPRT0_PRTRES_OFFSET 6
+#define DWC2_HPRT0_PRTSUSP (1 << 7)
+#define DWC2_HPRT0_PRTSUSP_OFFSET 7
+#define DWC2_HPRT0_PRTRST (1 << 8)
+#define DWC2_HPRT0_PRTRST_OFFSET 8
+#define DWC2_HPRT0_PRTLNSTS_MASK (0x3 << 10)
+#define DWC2_HPRT0_PRTLNSTS_OFFSET 10
+#define DWC2_HPRT0_PRTPWR (1 << 12)
+#define DWC2_HPRT0_PRTPWR_OFFSET 12
+#define DWC2_HPRT0_PRTTSTCTL_MASK (0xF << 13)
+#define DWC2_HPRT0_PRTTSTCTL_OFFSET 13
+#define DWC2_HPRT0_PRTSPD_MASK (0x3 << 17)
+#define DWC2_HPRT0_PRTSPD_OFFSET 17
+#define DWC2_HAINT_CH0 (1 << 0)
+#define DWC2_HAINT_CH0_OFFSET 0
+#define DWC2_HAINT_CH1 (1 << 1)
+#define DWC2_HAINT_CH1_OFFSET 1
+#define DWC2_HAINT_CH2 (1 << 2)
+#define DWC2_HAINT_CH2_OFFSET 2
+#define DWC2_HAINT_CH3 (1 << 3)
+#define DWC2_HAINT_CH3_OFFSET 3
+#define DWC2_HAINT_CH4 (1 << 4)
+#define DWC2_HAINT_CH4_OFFSET 4
+#define DWC2_HAINT_CH5 (1 << 5)
+#define DWC2_HAINT_CH5_OFFSET 5
+#define DWC2_HAINT_CH6 (1 << 6)
+#define DWC2_HAINT_CH6_OFFSET 6
+#define DWC2_HAINT_CH7 (1 << 7)
+#define DWC2_HAINT_CH7_OFFSET 7
+#define DWC2_HAINT_CH8 (1 << 8)
+#define DWC2_HAINT_CH8_OFFSET 8
+#define DWC2_HAINT_CH9 (1 << 9)
+#define DWC2_HAINT_CH9_OFFSET 9
+#define DWC2_HAINT_CH10 (1 << 10)
+#define DWC2_HAINT_CH10_OFFSET 10
+#define DWC2_HAINT_CH11 (1 << 11)
+#define DWC2_HAINT_CH11_OFFSET 11
+#define DWC2_HAINT_CH12 (1 << 12)
+#define DWC2_HAINT_CH12_OFFSET 12
+#define DWC2_HAINT_CH13 (1 << 13)
+#define DWC2_HAINT_CH13_OFFSET 13
+#define DWC2_HAINT_CH14 (1 << 14)
+#define DWC2_HAINT_CH14_OFFSET 14
+#define DWC2_HAINT_CH15 (1 << 15)
+#define DWC2_HAINT_CH15_OFFSET 15
+#define DWC2_HAINT_CHINT_MASK 0xffff
+#define DWC2_HAINT_CHINT_OFFSET 0
+#define DWC2_HAINTMSK_CH0 (1 << 0)
+#define DWC2_HAINTMSK_CH0_OFFSET 0
+#define DWC2_HAINTMSK_CH1 (1 << 1)
+#define DWC2_HAINTMSK_CH1_OFFSET 1
+#define DWC2_HAINTMSK_CH2 (1 << 2)
+#define DWC2_HAINTMSK_CH2_OFFSET 2
+#define DWC2_HAINTMSK_CH3 (1 << 3)
+#define DWC2_HAINTMSK_CH3_OFFSET 3
+#define DWC2_HAINTMSK_CH4 (1 << 4)
+#define DWC2_HAINTMSK_CH4_OFFSET 4
+#define DWC2_HAINTMSK_CH5 (1 << 5)
+#define DWC2_HAINTMSK_CH5_OFFSET 5
+#define DWC2_HAINTMSK_CH6 (1 << 6)
+#define DWC2_HAINTMSK_CH6_OFFSET 6
+#define DWC2_HAINTMSK_CH7 (1 << 7)
+#define DWC2_HAINTMSK_CH7_OFFSET 7
+#define DWC2_HAINTMSK_CH8 (1 << 8)
+#define DWC2_HAINTMSK_CH8_OFFSET 8
+#define DWC2_HAINTMSK_CH9 (1 << 9)
+#define DWC2_HAINTMSK_CH9_OFFSET 9
+#define DWC2_HAINTMSK_CH10 (1 << 10)
+#define DWC2_HAINTMSK_CH10_OFFSET 10
+#define DWC2_HAINTMSK_CH11 (1 << 11)
+#define DWC2_HAINTMSK_CH11_OFFSET 11
+#define DWC2_HAINTMSK_CH12 (1 << 12)
+#define DWC2_HAINTMSK_CH12_OFFSET 12
+#define DWC2_HAINTMSK_CH13 (1 << 13)
+#define DWC2_HAINTMSK_CH13_OFFSET 13
+#define DWC2_HAINTMSK_CH14 (1 << 14)
+#define DWC2_HAINTMSK_CH14_OFFSET 14
+#define DWC2_HAINTMSK_CH15 (1 << 15)
+#define DWC2_HAINTMSK_CH15_OFFSET 15
+#define DWC2_HAINTMSK_CHINT_MASK 0xffff
+#define DWC2_HAINTMSK_CHINT_OFFSET 0
+#define DWC2_HCCHAR_MPS_MASK (0x7FF << 0)
+#define DWC2_HCCHAR_MPS_OFFSET 0
+#define DWC2_HCCHAR_EPNUM_MASK (0xF << 11)
+#define DWC2_HCCHAR_EPNUM_OFFSET 11
+#define DWC2_HCCHAR_EPDIR (1 << 15)
+#define DWC2_HCCHAR_EPDIR_OFFSET 15
+#define DWC2_HCCHAR_LSPDDEV (1 << 17)
+#define DWC2_HCCHAR_LSPDDEV_OFFSET 17
+#define DWC2_HCCHAR_EPTYPE_CONTROL 0
+#define DWC2_HCCHAR_EPTYPE_ISOC 1
+#define DWC2_HCCHAR_EPTYPE_BULK 2
+#define DWC2_HCCHAR_EPTYPE_INTR 3
+#define DWC2_HCCHAR_EPTYPE_MASK (0x3 << 18)
+#define DWC2_HCCHAR_EPTYPE_OFFSET 18
+#define DWC2_HCCHAR_MULTICNT_MASK (0x3 << 20)
+#define DWC2_HCCHAR_MULTICNT_OFFSET 20
+#define DWC2_HCCHAR_DEVADDR_MASK (0x7F << 22)
+#define DWC2_HCCHAR_DEVADDR_OFFSET 22
+#define DWC2_HCCHAR_ODDFRM (1 << 29)
+#define DWC2_HCCHAR_ODDFRM_OFFSET 29
+#define DWC2_HCCHAR_CHDIS (1 << 30)
+#define DWC2_HCCHAR_CHDIS_OFFSET 30
+#define DWC2_HCCHAR_CHEN (1 << 31)
+#define DWC2_HCCHAR_CHEN_OFFSET 31
+#define DWC2_HCSPLT_PRTADDR_MASK (0x7F << 0)
+#define DWC2_HCSPLT_PRTADDR_OFFSET 0
+#define DWC2_HCSPLT_HUBADDR_MASK (0x7F << 7)
+#define DWC2_HCSPLT_HUBADDR_OFFSET 7
+#define DWC2_HCSPLT_XACTPOS_MASK (0x3 << 14)
+#define DWC2_HCSPLT_XACTPOS_OFFSET 14
+#define DWC2_HCSPLT_COMPSPLT (1 << 16)
+#define DWC2_HCSPLT_COMPSPLT_OFFSET 16
+#define DWC2_HCSPLT_SPLTENA (1 << 31)
+#define DWC2_HCSPLT_SPLTENA_OFFSET 31
+#define DWC2_HCINT_XFERCOMP (1 << 0) // Transfer complete
+#define DWC2_HCINT_XFERCOMP_OFFSET 0
+#define DWC2_HCINT_CHHLTD (1 << 1) // Channel halted
+#define DWC2_HCINT_CHHLTD_OFFSET 1
+#define DWC2_HCINT_AHBERR (1 << 2) // AHB error
+#define DWC2_HCINT_AHBERR_OFFSET 2
+#define DWC2_HCINT_STALL (1 << 3) // Stall response received
+#define DWC2_HCINT_STALL_OFFSET 3
+#define DWC2_HCINT_NAK (1 << 4) // NAK response
+#define DWC2_HCINT_NAK_OFFSET 4
+#define DWC2_HCINT_ACK (1 << 5) // ACK response
+#define DWC2_HCINT_ACK_OFFSET 5
+#define DWC2_HCINT_NYET (1 << 6) // NYET
+#define DWC2_HCINT_NYET_OFFSET 6
+#define DWC2_HCINT_XACTERR (1 << 7) // Transaction Error
+#define DWC2_HCINT_XACTERR_OFFSET 7
+#define DWC2_HCINT_BBLERR (1 << 8) // Babble Error
+#define DWC2_HCINT_BBLERR_OFFSET 8
+#define DWC2_HCINT_FRMOVRUN (1 << 9) // Frame overrun
+#define DWC2_HCINT_FRMOVRUN_OFFSET 9
+#define DWC2_HCINT_DATATGLERR (1 << 10) // Data Toggle
+#define DWC2_HCINT_DATATGLERR_OFFSET 10
+#define DWC2_HCINT_BNA (1 << 11) // Buffer Not Available
+#define DWC2_HCINT_BNA_OFFSET 11
+#define DWC2_HCINT_XCS_XACT (1 << 12) // Excessive Transaction
+#define DWC2_HCINT_XCS_XACT_OFFSET 12
+#define DWC2_HCINT_FRM_LIST_ROLL (1 << 13) // Frame List Rollover
+#define DWC2_HCINT_FRM_LIST_ROLL_OFFSET 13
+#define DWC2_HCINTMSK_XFERCOMPL (1 << 0)
+#define DWC2_HCINTMSK_XFERCOMPL_OFFSET 0
+#define DWC2_HCINTMSK_CHHLTD (1 << 1)
+#define DWC2_HCINTMSK_CHHLTD_OFFSET 1
+#define DWC2_HCINTMSK_AHBERR (1 << 2)
+#define DWC2_HCINTMSK_AHBERR_OFFSET 2
+#define DWC2_HCINTMSK_STALL (1 << 3)
+#define DWC2_HCINTMSK_STALL_OFFSET 3
+#define DWC2_HCINTMSK_NAK (1 << 4)
+#define DWC2_HCINTMSK_NAK_OFFSET 4
+#define DWC2_HCINTMSK_ACK (1 << 5)
+#define DWC2_HCINTMSK_ACK_OFFSET 5
+#define DWC2_HCINTMSK_NYET (1 << 6)
+#define DWC2_HCINTMSK_NYET_OFFSET 6
+#define DWC2_HCINTMSK_XACTERR (1 << 7)
+#define DWC2_HCINTMSK_XACTERR_OFFSET 7
+#define DWC2_HCINTMSK_BBLERR (1 << 8)
+#define DWC2_HCINTMSK_BBLERR_OFFSET 8
+#define DWC2_HCINTMSK_FRMOVRUN (1 << 9)
+#define DWC2_HCINTMSK_FRMOVRUN_OFFSET 9
+#define DWC2_HCINTMSK_DATATGLERR (1 << 10)
+#define DWC2_HCINTMSK_DATATGLERR_OFFSET 10
+#define DWC2_HCINTMSK_BNA (1 << 11)
+#define DWC2_HCINTMSK_BNA_OFFSET 11
+#define DWC2_HCINTMSK_XCS_XACT (1 << 12)
+#define DWC2_HCINTMSK_XCS_XACT_OFFSET 12
+#define DWC2_HCINTMSK_FRM_LIST_ROLL (1 << 13)
+#define DWC2_HCINTMSK_FRM_LIST_ROLL_OFFSET 13
+#define DWC2_HCTSIZ_XFERSIZE_MASK 0x7ffff
+#define DWC2_HCTSIZ_XFERSIZE_OFFSET 0
+#define DWC2_HCTSIZ_SCHINFO_MASK 0xff
+#define DWC2_HCTSIZ_SCHINFO_OFFSET 0
+#define DWC2_HCTSIZ_NTD_MASK (0xff << 8)
+#define DWC2_HCTSIZ_NTD_OFFSET 8
+#define DWC2_HCTSIZ_PKTCNT_MASK (0x3ff << 19)
+#define DWC2_HCTSIZ_PKTCNT_OFFSET 19
+#define DWC2_HCTSIZ_PID_MASK (0x3 << 29)
+#define DWC2_HCTSIZ_PID_OFFSET 29
+#define DWC2_HCTSIZ_DOPNG (1 << 31)
+#define DWC2_HCTSIZ_DOPNG_OFFSET 31
+#define DWC2_HCDMA_CTD_MASK (0xFF << 3)
+#define DWC2_HCDMA_CTD_OFFSET 3
+#define DWC2_HCDMA_DMA_ADDR_MASK (0x1FFFFF << 11)
+#define DWC2_HCDMA_DMA_ADDR_OFFSET 11
+#define DWC2_PCGCCTL_STOPPCLK (1 << 0)
+#define DWC2_PCGCCTL_STOPPCLK_OFFSET 0
+#define DWC2_PCGCCTL_GATEHCLK (1 << 1)
+#define DWC2_PCGCCTL_GATEHCLK_OFFSET 1
+#define DWC2_PCGCCTL_PWRCLMP (1 << 2)
+#define DWC2_PCGCCTL_PWRCLMP_OFFSET 2
+#define DWC2_PCGCCTL_RSTPDWNMODULE (1 << 3)
+#define DWC2_PCGCCTL_RSTPDWNMODULE_OFFSET 3
+#define DWC2_PCGCCTL_PHYSUSPENDED (1 << 4)
+#define DWC2_PCGCCTL_PHYSUSPENDED_OFFSET 4
+#define DWC2_PCGCCTL_ENBL_SLEEP_GATING (1 << 5)
+#define DWC2_PCGCCTL_ENBL_SLEEP_GATING_OFFSET 5
+#define DWC2_PCGCCTL_PHY_IN_SLEEP (1 << 6)
+#define DWC2_PCGCCTL_PHY_IN_SLEEP_OFFSET 6
+#define DWC2_PCGCCTL_DEEP_SLEEP (1 << 7)
+#define DWC2_PCGCCTL_DEEP_SLEEP_OFFSET 7
+#define DWC2_SNPSID_DEVID_VER_2xx (0x4f542 << 12)
+#define DWC2_SNPSID_DEVID_VER_3xx (0x4f543 << 12)
+#define DWC2_SNPSID_DEVID_MASK (0xfffff << 12)
+#define DWC2_SNPSID_DEVID_OFFSET 12
+
+/* Host controller specific */
+#define DWC2_HC_PID_DATA0 0
+#define DWC2_HC_PID_DATA2 1
+#define DWC2_HC_PID_DATA1 2
+#define DWC2_HC_PID_MDATA 3
+#define DWC2_HC_PID_SETUP 3
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+#define DWC2_PHY_TYPE_FS 0
+#define DWC2_PHY_TYPE_UTMI 1
+#define DWC2_PHY_TYPE_ULPI 2
+#define CONFIG_DWC2_PHY_TYPE DWC2_PHY_TYPE_UTMI /* PHY type */
+#define CONFIG_DWC2_UTMI_WIDTH 8 /* UTMI bus width (8/16) */
+
+#define DWC2_DMA_BURST_SIZE 32 /* DMA burst len */
+#define DWC2_MAX_CHANNELS 16 /* Max # of EPs */
+#define DWC2_HOST_RX_FIFO_SIZE (516 + DWC2_MAX_CHANNELS)
+#define DWC2_HOST_NPERIO_TX_FIFO_SIZE 0x100 /* nPeriodic TX FIFO */
+#define DWC2_HOST_PERIO_TX_FIFO_SIZE 0x200 /* Periodic TX FIFO */
+#define DWC2_MAX_TRANSFER_SIZE 65535
+#define DWC2_MAX_PACKET_COUNT 511
+
+#define DWC2_HC_CHANNEL 0
+#define DWC2_HC_CHANNEL_ASYNC 1
+#define DWC2_HC_CHANNEL_SYNC 2
+#define DWC2_HC_CHANNEL_BULK 3
+#define DWC2_HC_PORT 0
+
+#define DWC2_STATUS_BUF_SIZE 64
+#define DWC2_DATA_BUF_SIZE (64 * 1024)
+
+
+#define USB_PORT_FEAT_CONNECTION 0
+#define USB_PORT_FEAT_ENABLE 1
+#define USB_PORT_FEAT_SUSPEND 2
+#define USB_PORT_FEAT_OVER_CURRENT 3
+#define USB_PORT_FEAT_RESET 4
+#define USB_PORT_FEAT_POWER 8
+#define USB_PORT_FEAT_LOWSPEED 9
+#define USB_PORT_FEAT_HIGHSPEED 10
+#define USB_PORT_FEAT_C_CONNECTION 16
+#define USB_PORT_FEAT_C_ENABLE 17
+#define USB_PORT_FEAT_C_SUSPEND 18
+#define USB_PORT_FEAT_C_OVER_CURRENT 19
+#define USB_PORT_FEAT_C_RESET 20
+#define USB_PORT_FEAT_TEST 21
+
+#endif /* __DWCHW_H__ */
diff --git a/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/License.txt b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/License.txt
new file mode 100644
index 000000000000..1603937dad82
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/License.txt
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/License.txt b/Platform/Broadcom/Bcm283x/Drivers/Logo/License.txt
new file mode 100644
index 000000000000..9370146336be
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/License.txt
@@ -0,0 +1,10 @@
+The source code in this directory is licensed under the standard EDK2 terms.
+
+On the other hand, the Raspberry Pi logo binary (.bmp, .eps) is subject to the
+licensing terms and conditions put forward by the Raspberry Pi Foundation at:
+- https://www.raspberrypi.org/trademark-rules/
+- https://static.raspberrypi.org/files/Raspberry_Pi_Visual_Guidelines_2018.pdf
+
+While the logo was obtained and is being used with kind permission from the
+Raspberry Pi Foundation, it needs to be noted that this project is not
+officially endorsed by the Foundation.
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.bmp b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.bmp
new file mode 100644
index 0000000000000000000000000000000000000000..674356fe0b1b12c60ef485d27cb4a659eafe3485
GIT binary patch
literal 185398
zcmdsg1)Q`$aet6@kuJJedpImEhqlP!ez-4A(F2MWJKS|~TAan*;c%BCi#xRFVlD2v
z|2&?IWs)b)-u?df`MmGuv1H~ulbOjRPoB$O{UTpHwkiHDa$IB1Zhs$iEMvZH{~gO5
zuRL!)du(&E6Pog$Jy~2R|BiL6W0_+g``G3<$2pEU?s1Q6{_gMo&iwt~|GgQFM&@|O
zJDxfI@sDp#aDo$<6Q1yd<{$pyAIx|>HYYmKiOh*ld}4Ewlbpny^rR;>Cp+26%*juF
zax<As%qdQB3UkU+p3<D^RHrhhKJ}^1X-;z*^N;`dkLI8L>7UHj)|NT#X-{iTce>M=
z)1UtI<_u>zgE`|F&uGqcrZbr{pZUz@EN3~3IqO-^YNpevIosLJX3l>0vzv3A;~eIk
z=RBu5*SXGR&VBB4oAaFKJm$RTJ+C?6`Oas~fBy5E?d@%IfeT!~T=0SyG#9$ih0KL7
zd|`8ui(JH9^r9Cv|NPJYZ2sk6{>5DEViz+Pzxc(?B`$FZbID6y((LT)m`h#iQs&Z^
zzO=c_WiDebd)dpH%U$kr=JJ=nyt%>^u3)Zs#VeXCUFk~Z%2&R!xyn_pVy=4CtD37_
z?P_Lsch_9~>Q^_{xW+ZiHLrP1bFFJ#%Ut`~*EZL=&UMUnuX|l{z3W}iT>tvlH#fM!
z4a^O1ctdle8{Np<_{KLjv)Rnt<R&*UH@)di&CPChGjsEs-`w2d7Pm0ByyY#;t!{NI
zbL(5*+WhOk{;RpoZEj<3d)wQZ+uiPV=JvP0y}833?qKeC$2*$6y*+cMJKf3L`ObGX
zce%@5%)kBHznQz<^{(b_ce|Up``zzu?s1QMn0wyyp5|Wnx|jL)fB$!L?|a|d+~+>`
zG55Xiea-#ucRzFg``_Q}@9&!jJm3N5fe(D3dC-F%WFGwB2b+gH<RRvv4}GY4*ux%X
z9{%u$n@2q25$2JPe585QqaI}*{pd%V$2{gS=CO}`ta;qy9%ml^_{W<kJmCrEiBEi@
zna}6uNl$u`dGeE=Y@YIzr<kWc^{M7*PkWkq`qQ6op7D%lm}frondU$K<3G%Q{^x(1
zXFcm#=Go7Fwt3ETo@1W-+~=C-J@0wu`Okm8dBF=_U|#sb7n;RlVP5p27nv8o_{HWW
zFL{Z1=}TW~UiPw=nU}x(<>nQyc!hc8D_?0|^{Q8ySHJqz<~6T*jd|^BUu$0Xy4RW4
zzy9^+4R3gZdE*=3Xx{XuH<>rT`OW4nZ+VM(>s#My-uAY)nS+A^^Y*vD-Mr%+?=bIt
z=R3{2-t{i??svc2yyrddG4Flvd(Hda_dfIf_rKqK-~%5pAN=44&4)hpA@ku6f7pEF
zBOfsz{pd%{$3FHk^I!k<U*_W<|G4?YCq7|5`N>b3PkriBX1QFNPk;K;<};u9jQQ+m
zKWjesxzCx;fBy643t#wx`QjJ9XukBNFPSfY`OD@jU-^pp>Q}#NzV@}RnXiBS>*gEZ
z_=frBH@|8A`@jF&{LlaVkNMWOzGc4s?Qfg!eCIpnyWjn;`QG=wXTJaa@0-<XWq$C3
zADAEh@Q3C{Kl+jR@sEFOe)5x_nE(CX|26;jfB$EG`qQ79pZ)A-=I1~Ex%tH}eqnz3
z%U_yb{pwfd*T4R?`OR;BV}ASF-<se3?sw+*zyH1Y!yo=&{`ki~nm_&NPv*~m{<HbZ
zU;bkL`q#gjzy0lRX1!h)ef*g9H<|9v=8J`;-T7NA=Cj@D<e0^YrPdsy@ZZ|m1GqaP
zD2t1|ovmY%5RN(cPj=@kh&Fw^n(rQCI>Ipo|E;|xjWu_6xp&Oy2FC>aqrtC)a*Pnc
zk;i|$bHM3%`24}n_=r1$BaZ)MPigZxS*-SswktT&_)qpZSYyubA7u#~Vf^!;Ur6c*
zOW?@jpAY>bErBD7|9IBZ?n48$njK9~d^GXjj*Rvp+SKuK`zVG&M-l(=oWigFx%m<7
z0!I-4?aZd96Wr?Pb%7&?|4_<bN#V$Kfun~1RHyvQh0Qikn-q_os<J6*)i`-IJz8Gi
zh~Yo$j0IO(&1W2jQ%#C=cBBMwr0^dHlKboRa*xBlL3L{u>IaLX<c5zD{#${lbE(Yb
zOm^jpmW|zNWOj(ZM+pBN+4S#+G~Y#WYhS8twd3A<sO6)B|1M|ni}Ufr*YQm11iOa{
zy3_cP!Cy*sF4OdNN07k2gTY}Ij|l!_0schv3seOO91#H=4gAM^%(CidD)>C!!I21q
zjs*S!{Cj;-8t-v_<wywNDB#b-zsM0OZgHLKC<x#P;J?k`)6?{HZk01a2Zx`JJ8b;7
z_zCt!zIj`=3#<-%nb4u)Ki=h3-`ecFc^W>kbg<jk#dIAlzI2HAZwWEydX>ZSyKqQ}
z)&1O!xed$ZL&INQRy9D5Y$Eiv^+DPQPsUbr^>FZ)lLL0ah=%mod!#X*&8!~I1pQ&)
zA6(QnlrpkIfpUm&C`;uwkAHY!&rtB&d;~WZtIuzKq1LAH52HWmBzZ^x8(%87S^W8A
zK&O~7Y5rIj5bgo%b?=Nv6j7VRU$v-hIO9{{66^s9a}805`!{b8|G@lK)dPlxe>CDp
zVr?JX;QZLe@SjTIcgy)8fv2x=BWc*z5OOfA73?V55dIV0lEQ<Iu;EI4y0t;S_}x$_
zv>E)l1f<JwQQk}*U`v{tZ%JC^O+YdFv<dumrpGeA#}JwOv^dq@3ShknBQ!kznwYcZ
zd1Hx4l`kq3VsMHE$A2m;Lg-YjEN#O1R$XZdT4oQIL;K-@@sC=~Jbdig8Zy0747_4`
zSp4Ib@(-<RE&8L8(gPIzV%QbaL*gG{`AY-PZ>5QYZn(I`S{&lSkX~Rw{39%X#q>Ok
zTedq0nE6u!dV%5aSB&!^$N47QgK~mR2aX3D3k-$7INQfDy9mOT>xL-%Q;>TwkZufw
zzbe;;#jr6C5Z^fm%E=9azdX~5VeigtC<L9TG7ueEWodti!PpS^v#Xr|L)775hSsxO
z!S|df($)t9q^AbJKO(j!*c^DgQ;I>8fhI^>XIl{2DMN1jx5XEKD5l`KLFa!9#=~#<
zL6W-T)qdtBqgnAE2VQ*Z_z+83Ry}tr21?Px5<u%R>w3kE_^YOO0W-|uaFZXgV{(eX
z_?OXu3OI+^@Xv^T!Sj5OWKb?5^GP5V{)quUrC#;9{Cnr+Lcbs|*Ki;Y{#$7Qoq&FM
zDXX)SUkMJ8g0JWCQaSL?VN)@G<(XXZM(CAzrg`~vj=X3F{QCwJGLzO7^xaK3yd^}4
z1m=2%yl8*?<weB|<&meC`>DHXZ|!Jzjjl*q*{%4CKP7>^R}A#UzfZ0~$zy%nYBAf6
zN<xmOvncFs{ceI`%RU~SrtF&+?TNoC>{%9D^Ou_?ji=L{*&-$R)yQhGKbr<a)8Y#O
zk*(}+li9V&PG~&eGZ5;Bf7tdcW>d`Amh|3TgS7a&uyQDb3jXXjPUefS(!#3ca9(&t
zv#h9>4eEn`D3M}=7mR&9_6xrU06`k=I2^}pi_0hbysXv(|A6UV1akQkt&bZH__Ai*
z`UdfxsUC^xbo|9tl&W{BQq#a$1)_e@RT@33D{(SERWTWV$@9wgw4>oD2q4f)J7R6(
znxC~y_QI+73$KxA(YFj~*I{PWc(1a!H7~+4`Up9?GEKx^fIsZby7r@&A$Zv3IEWfi
zSi<?iewqN%@aN%=%t{@$1&Uwt%NwC20VLti!XG_BI?18KJ?d}=yj{1HOKcZN5kLz5
zEc^*O#)yG+4`6kVroHdPF0V-tKmz{k;`x-dBdjcS0QS5qb?C}b9n6fNo)wQj7x(MN
zF_3_9PXzlt9*<W|KLbMiI3ODTF_S$@-AwIJLr|y<`eP<^Ua<)mrs`PynRe56j0vak
z`l-0|bej3EkYt=dY?ZP2GXZ0Y>96?cw^~j@H+-$%dTSbr$cQ!)f5!17IR2(Tvfexl
zU++88wWg$=7C;;pariUi)wm`b<g4F4BY<kEu=t;GN&yM=#GiSKENV;<h5wkI+UNuS
zXcWMRyj;wJ0XD}8Gi!bErv<Q#@xf8}=jd?0_S+*8VBzF^SBM(zd?BqPWQD!)r}y%R
z8CAsKzfCgHPy6HWS1kw9FE{CrKP`ZWHPR9I(~*B)_#^axuI4K=Wm_v!2K-3@M2rF=
z@F%TLe-_A2g-@<#ajD`R#q?%>;+Z)Ny#><aPX>yS(JnInTKk{!4Tfn@0y*#>kwJ;z
zqI?YW_*033*wLQfc6EeR9i2&?-3v(|3;rW27o-M8jXyO`jf%7=?Cm*bNa4z$$Ii6!
zhg9Px9~lPdJr%WY(rWQ1oi7N%SpuaCq*-&(PncA2+T*9IY#aUZ4_zxn4omBTwfIw0
z|5_P$gc2ntqtQqpdPWU3AuLl`qMH*>5Vl!q+m!fIS%N&hmlA9Pex}#{`6d$KMvoEi
zbFXyani78^_RL}YEhFLtq&|*Akhmw<z5jC<(6S+7XsQbhb@)^2-+SOyAw+cDM*UO6
z9vAwm%<TrE9?;<`!5P8@s5*cSf1(GgBP>8DJZ!+mzwwiKu<q`d*#}K&q`P|95-|!;
zRj$IH3Vzfh43^~b0w4aQPG~ai5f(IG0A$<5jHp5&75+r*pDT1Ds;+uMX81>RqJ|Mx
z%4zJ#H1VMde<G!uN&Q*(n;m{y0NEVyXoP*FCcM?)kGs}7m-Qbp6ITPkPYOVzqT0@Y
zEu2D0HTdI-*O`JJF8iPip0&s{_hClzjA5$!aR*R@pbGqnB~qH6)i5po(&j&B<l{Au
zg58yOx#s~EZ+IqBfj^NU$kuHUAf@xo)w>X$IFM7A2viGq0(XEgBMSVnV_%2m%F*bb
zC%TpuK&DZz-&A#kvaMO$LK6;Q^A^URz(`@&DCY4wqHEcl556zo890*6W=RVYF*`v;
z4dah1U1#gGMAypy<wsw5P)9RHpd%d31r1Obe~eK!oxujvTAysb#mBulf~m@^1_*iJ
zpaBZwk0W$dVx!?#`lX_uL9I_g46s1il&Pp2r9p%7RS<t-@TE%Z7375eh;em3+r~By
zS{>E^g-mr2f1obbKxETULbU1Y*jc#I1<-7^V4`RU8S9X(2;vX@RmKlfBWr1eo2_pl
z*t-)xOF<LSJs2(_iyF#P2Jy${KUasPyl+-z<lq7wAQ+=?^$_RL_#!0T5dNsbb*M&y
zD*6<*Y@1R4(a7%r+3ab-CQ{dcwubP>(SI%##kl~x)f+9T+-Ct(As-pjJaPbm-W9?h
zD`}uYHL<wn^#+2Uiab9A%B4|7-H5Az0}kQucU9{kb9qQg{j<j6k|F?<GCF-U0th(Z
z5dOZVSom|9e*i%t*>ylyBt+w`0oR|g10a7H(5VpqB`)rNnM^dL{<*rALKYzJov{PB
zSe0d&ngISFRI?Rk(orh*52%XFNZeHrr)Nw80m+8G=^DTvFDuHkWC?ZCLRB)N5RwLL
zKVJtx4pZhTfIl+-nQR22vcNx&XhYCf*Fl_~&jX;2E%#~}f8@>AYaM%myFdV5fN%c-
z4`sa!<MeDD0LK-gTFLk$VdhD`k<K?y)mkAzm;zy<wpwBUAg2^X{Ku7Ey8maP6DnWT
zKt3CwKnn#Hxdy?&vs>20b%-MVgqe`NiGp!^3sG$$flQH=js~P!vYFOZTHJ*MyA~Hq
ziTD#<G6P6(2C&lp%_ScyESpx_-wd2F_)9iJ!XJzhOG-0Pi6Z10f<UIQf-T$sShw=H
zU_$?;m{GzX`lte@{@FL|(`)>*L940=<1eYHs><>v3V&fqfrLK}{xcW}#`s$q=y}X>
zCmvbmaX=LQf^QM<hhxN2P5XukJp3ERpX%H>EFgvdny*;EpU{xr`cJ(pUYnmh-Cx}`
zDExD*dMEMcqecOLFhs9l>Zkt#{MlZHR!V@vUmhyyDkeKPpS0)kCvp!~1ikQ=;6D=h
zX9zDyx$>zk9)CJc=@Wm7@E;BQ1xu|{e>?$M+6{JW&*M*;pFS~y41czXwO%-_d%t-@
zdQF}=7Ju6O^uRv=|EA+l+D_QjePg8nncMKVqU-=%5|qWCHb3cBA_)J6<4*>s-U49i
z<qQyuKW%=Jlf+^8rBOPgYkf{LI9X-w*8@sz$NzB=5Qje*#unA4@x0B5(<QW5XcbMC
zKoF;^nl?~gwc(KAj>DgJBepVrC?}9d2E`3!&99Ip5voqT)U-<d_7DK8x6BZX!=K9i
zl%%F4;8<aL%rg|G0xUnr;#889E&x3JQuD~<fEfI#)N@r)JZa3{BOdm}!A27hEKaFh
z*5YQu7F#Qw-e&OU$>SUet8T*nUlp(I|7;ZlT;Or)Cjf48gL|)y!JnR?ElG=X02<F*
zOCYl5UQ%K0YoiVE{k))ub-&!&ZU+Bc(LvOw;rrw^B89=**9QNzTpTlMEh?oA2aP|O
z`mZSyr}F^}dfQV}p7litKnXb11Z4XOBVj4hAiFn>KX3jmOnNot#`v`)(N6-y09Wmy
zU|&0`5(Z+DStH|X8h?>IZ3l=`{(|k4*j9_Ucb{OUJNOeu!lGFtSB}&8OJY=ZfGEpf
zGrchbq%l7QO|cu{h<1Y<0g(8I)PuBSo`Q{}&jY(E=9lRh*{?ar5g#S`^sFO4Dks-V
znO72jd2qO12e)3`kvkAzvO7!*`l2Ng;;$np&L&D>i>;GN0g?DiUc97D_Dreh2bM}k
z!^}Pq8hp9<$Hbw5dZ`2pg}=f&9<Y{Tyql=|CDZ!YiUl`(LG+Ry_LZ`+yn?3aW!+AN
zM0`QuuSnI~I_XXMw*xBR5JMKVu@&Gv?l6`{trG}_+k`vE_y?uf0Jjh3)W$pe!mzn{
zD)7634iKsS1;Lc%Kr&YVht&(?FZ*y0zSUy3J+)qCI^CYl`<R`s*532q2o`jLpZV&@
zfTaUP$QM+9TPcdL5&p5A6H?mum>i`b411gqQZy3n!H%ixRxrYY_$z#`L}i9+RFu{O
zZuls%QMr!jg8*Sly8(PKz+dNkbp$8g6&zeZMB|Qwu{BTjz7z;)?FR6{0DoGD2iDV0
zX8oNj&zgH>Pz#i3eQNsXps!E>z1{F#fR8`zLgv-LSv!yDVwqG1T{KR=<+~Lzib(Qm
zkL&{on&oV|y~il5=Se*L>G5;tGPHe6WFdSJbWs`6xT|#k4wK~EfxkjIhNhwZXcPC<
z6E~Lf@F%J3;3s!*cPPtN9LxpeQ6T#jRwtFVg+@KC{)|aLy&%-ZpR_(M{BY;4Y=Fax
z<or^c$~$-KjWi?(9WNKN;%|@m@^%Y9^Kniuf$!i?z84CR=xaX_AIu3~>JEf`iW%W&
z$SzO2=7sJ7&LGplpPKYS1Lh6!5R-M(iey8i`_qiH0J;#b!=FrwyRxkKOc}jP+QMDS
z-UBuSKU_sdkEq(QT!%jetQRU(_|q{GhhmTOnFX*R`0+9~Qm<PnwfIx?wRgE)JWmXv
z5DaiVE)DTzab{LQjP@2nW67|l$sM=&6X{FGO*jne@=RKKrTa8VM~5(}xGAMU{<0v7
zib9*o_y&JU{RvqX)oqFwJ000*NzrVNKiUaOqEEd>LPnbGnzaUh!umHNf{c^Zr4k%?
zPBrlX353V&=T8HT$6qGZpW2hDUF}`tPdN!T4MWH(lGNp*{tG_W-v*^DL<*9{+(4?o
zRR_Yj*Q+6F{0W;vI^R;YC|ku4giasq?@pb;yZ!$AG%$6>@dUM;Ii6CyBeF7`Ad_>J
zFe>X>#dj6{luvC#RLmHY*b6b?=S|#d$J_fnOiO_hw-Ty6p$3&9I+L&SAv0w%N?}#_
z6CskHruKPDnZvN)`<1|>tvyx*3r??K9pD%xCMjf>i@8nY?AR&n*=&Eo(m*{5&+&>v
z+4r(zSNIdHvew`781I3XyPnYjI5mejmDq47PCYe`gWoXvOKS|lLv}I2uFw}7ddOcc
zU@4j)IzV}Qi9dm-R2Lo5k|b3pmy$3&0Ql8gbBvVtBs>Vs*RAF|e6QNtrDAr0!}5}!
z`SA&&JV24$De))liR|^FMw2VKE}u?2lSg#Ml097?s;b)#*!_?(w0)eLzT&08%hM7?
za8(4?CH}-Uu`c3U!#q`Uxhe?1J!U1ap6_VP*fap0QjlYw4w75RV~$3I$`&@Jz@IQb
zeDGP}rS6_dLs-djFLrTG){)^PxCn0%VaTFZ(M#rselyQ<Qs7TSKOuunJVNV4wDMP2
z%5meuhAR%{b#W3JNfZ>upl|CPYZ<jw2UsO6qBYC~{)94zx;fEhDE#?=7{dq71m9a-
zEvhNNVj6HZUl2@SiXzc3NK(H=C7T~|3}zp(_>T!X0T}p@a2dE7xkutky)$S{2d+Qz
z%qrBYz4qG!WfurCON?5_1^z^66s${?1WjYN<(qO@k%)V@?}a*b*Ro&I<?lqdR8&Y9
zpzQ*GLcYPeH0!<k!f*S&s+V~nvj=^$7@GWb5zNScMA~dt;E#u9^sCxl?S#<+toMhX
zUB3ZZ(j2C|Ox-c8u!Uh)M<m%61^(DBb<^`539uCMcX5L*SbKX+BxW^mgL@J!e@lg8
z(n+Ci7_ybcpAd@%J7Uc2G96Y2hdHSjXvb}nEic3NR3f3g7E%O-b0Jun7(=Ayh~OI0
zM|f?A|BQ3zgxPc&(i9g8Y!H9w1UA!d+o9;QsE*)dY7F6iHS~%Oz*&Na_=rA1knM6F
zENAM9vJ=)!loErcT?&7N`?VlSu}L_7jgdk>0c3*Tz5#(9WhZ-u`5%qC+ndtN7~HQy
z$)5^4!651?(2Jmt093%}NFgkBgJUT9P&Gh6P2sQ87$Tw9P!q_6=(u(75@g-9$^2%7
zpG=h1&4#1@f*s7p!We8vG~o~Vp`V%<-SaNK!7`?t!5f^;3O|`Cs~Xfq?3DbL#sG@#
zq0)Ne2dgv8BA6h?(hain<0#3#ikk4CRogn1BVtAhe@*yl!NS9d7+NH>iEBwO9_S1y
z(HeV-2;obnb&wGbqzC?tO&CJ`Egl5ztlHNXa)$wy3Qi3)5j#22)dPQG;7~BG>x!&~
zu@{);cp+pQ19n8wROs9<6@d1@pV7$d!B4|Hj^23e?Uk%!z=j5<18931CYZus*O{0}
zcwHpW@)J=I$3K{}%%M+1DA@tDeI8Ru;omeB`o*=`Gl5lZp*p4O!iWQtlHd1Mq>&y#
z%QPmF!e47aD1)HOT}UVk*Qf?DOXZotULht1QTk2!F|ic>x?qYL&aJaY+@3UuR5|9T
zI+G#e>^0pTP-B4Zs$9a<_Q9Vrh1#Ad)5%?>TEslrGg^bpH6)$K;~s7JLnPq(;7<(a
z)=J+k@h4o<Zr(GT^|8cZH>3@JNc?gBM{9qG08~wh0J3yRnF-Z$AT`Ba!&Xp}{4c9R
zebwfFuv61^USbMH`zXs?=mORj#1psGeyD2obwq=fYb-gN|4hf9=uX3$e~XZ+184&{
zHRAq_C<&zPZrEVVsrfJU5DI&ufjPH0AmzjQuQmrhtm-4=_tNpV^IzDVXy%ejVo}!_
zH2Sab33q^j5`dj}klpPr$t4`V+4*1GDb(LsLmAMa-EYC3Gz(ky1+6ufv68OBJ}BMm
zUPFd!ZPz~_Y3he_NS;Ft`dubaqtE~i8v+-kfPSBDFV<sn{hKy*g`gN-_3SbPh&MRi
zfDQn@)x92d-D3S4l%{1z>%fpL-UR;CI$~D@!-oJc2-D(^HK$zv38ZOx(RL{0I<$d+
zYfqxfDEx5I-^f?=0N+}z!-SXXpYdsJ76H&ff8ik--{1qN8@mD+d<0_21B$H0AG_aj
z{XgM=l@8#L@JC^ngZ~C1U@HKpL0i<~kB3X;`!B>o2CWbC>DZM16CJiCMC-bOolLx;
zZLTaRyByYYYv-;19pQeV)gqscP2rCj>F5|P@9zqvYp*CNy&j5Iia4jhpU@|zNPRlg
zl(?*<ltKLMP@&Gmr!?C=<69CX{`mbbi*kWKFlPljN(1C@UKW*<bd02xaKzRSvKjLO
zLUtY3c;dLQG9~_4GRg?3VY~U&QIZC_^Az&?P5VR6{yXg_;g8Kvk>@P&$Cs3AKwG}+
zg3@fctR$6TyX|pOZSfEJ22iJUSjmehv&5fpXgWjM@?96Skyt#({u4g`9TnP<s9#(B
zQP*NoQaumG48?OrqN>E7T2rA?<)Rk%Z&Uc=h^?YxQ|-GvEAhuZtMsuI{zL?%QYD{`
z!6*J&MZ<Fz6(uUAX=_O@_<U>X!QQv>RTci!tdhp6`E<0KT51UDbr0u&hfh71WCMGx
zVFhbUW#Mc5aqmzi;UNAxQ>dX=zK1ZT1u5ELqg;9TDiFUW<GMspRkpImpJGUn1VWW+
zND1>7z5_K}o>1A$aOJ@}fVoy!3PQgtsA~Kv53E?kgkVsR668*E1Dyih(C7>9SQ2KM
zu>SQ3x4|EDsS?;AJGj?uDgdDa&`q@t60l+XiFmDksKFl$=_<tzC9|;5He~^5{KG(K
z`d0WJKm8NVzY$Az8=zYJF_z(ZF#OD>JmBHt56o^b>LsXcRHenA>;M4^goCPesLO<v
zOLYex%omt!$ooUJ3z<Cvrbhki@o&L1thE%fELy^=hiFlu8@`EX+0q++F3TMd&j8QV
z7kC==ckm}Wfcz30@I!^fv{UyzfjCtBVds<AYf`U{x9acWPk0H7r!=G_?3yxh-4lK)
zT;81i!{E0=lVXcdQpZYn_Md*ANL<fRC_MaAjM^wFBhOKi-<179dMXATL~h@m-E#3K
zMhO;Oeku$RQpjR62Iw&H$HBZ{BPg%xE)aI{hwHj()n)}iiFQLl$YJ7-Q#q|SMZK8v
zy=&J*c=(epnC}6UWz(;QLA1u4z!((D5>rF+y?D^iF90Ip_uPe#Kl6$?(*tM_s=R74
zd%6eft_gm0&-T0vo1Zlo0Fm(fU$yh`C*JKVStJEOntyw{+r4`7$~{i#U_mEu2e^t7
z&J$Y4IA9WfFtZNuXDkpIh7yWU3d`$X2@EP8p}g9L@CUi)l4E+=1r0wy2jWl1K<hQJ
zg((b!D^fNB0~~?YO>dy*(W~Dn`#^7?@5VlbqCx!WG=$|3ZQ)BtKLrv%#0q_my@mGt
zydR9MpTD2Bd=ORpJfkAeL?ZmT2W=SSg}GcuDFgr;;n_*N0usPQo5dgJ2NPSN9%GCy
z+%j*>Xb8Ly>pwFLF4*(7aAz7Q?i;)VjLTN=f5V4foYsL3z<o3W+bOL7BPwB3^V)sF
zfVV!ytpj%e(gzmpQW~4}9G&;GEqj@I#`aKA41xbh*yW=30$lehFev^8Rz$Y%4J>zN
z_py@Y&i7B~!MR1nGvJk8Q23AN$f;~*y_ijR0^irNHzGTiRSSs_ydo};iSJDWtNyn6
zS^)ePlgL~?iN7d-iqpXV{vfY6-+l$$z;AHJLkB+%6bn09C494ugrD-i1+!8QXxbBh
zhYUrS7^I+w=;6NXdL6-u7ZCw)k%phczrO(Fnaf@<u;!;V0==qdA7)0~0BHJ<fuF^{
zw*Wvy#xfOufsKAF=R<ZoAuORWcg}L~^Z1V@%pk|9RV)rR3g*I#l9~YxkYM&iAne5h
zc4Y?be@mqti;RYv9Bd+h_r3*5T^JbOvE(OuSRdg7Gy?wAi>YDMojZn!#@XP%Y<aNh
z&mPvt8=C<ki};V|9G(NQSR5n>m1Dr+hTgK+1svor@XGj)*s+|@V0TGeyaE(Kdl)i`
z19@OM-_o&+N(<KXmmCN1w|P`H&5xSGC-VE?uoag1)ruM1mpUF=g%SZl{H2@+1{|Kj
z2|vJC?4c0**KOyQxgFMqn}wX0$KfD6j6ZzafNY38nOOi*0;Zv10JonSiih)23jC>;
z^BP{mzgYzkwmz1i{2@@P?^UFMHTX*d&W#E{X$C?zH`eB*!cR}j`>kv6=N3hTu`ln)
z*8`OKugr08GW;4(q{3ewat6gP&y*BUCjhcqpdkFK{q3#sHsK;P@1m&ir#rxWHrv<5
z1$o8+5h1uV;`IA}@F)a-k@YYB@VHQ;{zCq(s<!%{8uV1YeQRGcK48;-ZX<zm1pFD(
zKmqvoyI>1-fPwLEjLLYX=>)xfVif$jK0X!r?)#!cA8m@OoQzAiKaRT26n&tl6NrO9
z)7QV`6uh?_=TPw<jTI7Dxys@QPgPXA-ZmJ>VDhGtTA|DWve5(EA0M}gA~y6F(D~1c
zM*%a?V(t}s3qTxe<L*2p{*)Jjh)u(80IeZ~b<oFK;hH_<>w|s*5Hr8P^ps>H{8d4i
z&i+%XfUx3MzI5muBp4y8@vcUpBxl|c{oV<2=A&B%=sbgzB%J)QPiMs6u3AAc7)Hm7
z865JtqM}>jMw&A!2#A)WmEYFUwAucu8qbP9^@Z)0oVE}n0TGC{M!pc3{UD&Xr{rjY
z^J0jIjQCU0A3eI(bb<A9rx`rZ05oT}D8GaF6i=WqrKy|$-9eVbX@R$C&P`QOwG=?7
z|5V<Wv*fB!(dJBe0O~6{$fF?^H76onj)?x6U&(-TWE?;q<N5I)DJ`}YfzS)KRe22!
z{&rE8dP-7QzF9UUjN-A1X2gF?Fv`=S57!U&wh3&evpkyL5j|I75z1u|@4$7sj7_wl
zUEO0k{m0H-US1V7X}_?E)a_~cw>#TgNY=MQG`4iG8-Qc78w%d=kgJ1{iagw_Y*~pv
z0g5=SqH@Er81}q>zDxAA3Yh6$2>jqH4QTwoWHEOyDDfu@f}Gw6y&=;R%f!c*`@2)n
z5A53{VeHBGZ(SHu({IZ07x9UV;AW@TASQyA{jtSjF)RM;ueNSJ?rEfeYEq>iwD?mw
z0H8<>A?<Hs+6FOl1Wts9QaJn!KT{y3v_CkyQmnMp$3ZC&FBgU5ZvU(@6HY3nV)P6@
z=4y3~*t$m*a%u6$vzu}NR1-#Z8^m7hiN(GRmpab9(sXJgC@F0p+nBxofF9|4?Ggq$
zWFD&LmHJP8byTy`RZJtsW3k-d(SR|Y&gR*KAcvie6p#;R_C#s!Z+^A-6P`-dLcTzB
zwZFs0j}15O@768~3F8G0UaWTO_sV#HDu;*d!&>|)OQKQ5Q649-+T$!v%L!2!Z}&~$
zX=jXZu%~msTKi9ZBTV~}wJISes^&bLtRv7bPmOnwWe}V4FRG`|u$-0pqSb%g!SpX1
zV&(9;l#f=kD6@kFk)FlYuN%YOM(2Lj`cHf$QvbGd>e~xeFxsgC47+n?g4I)&d39Ci
zd5d=N3T5pQNUi=80anB+GkGBmkHt!9MIEf^V#++4ZU9@hhvln%SdBjxvEBgLDLo>7
z;$d&Dkn`L$z`?W8k+5p|s%n<l6-a6R_4bDv0mN*#fK{YHnfr~LxC%)iE)dg<dD|AT
zgHy%k#q(<YCpVsp&=G!LGX{Tc4{lKi7PxJZ2m;iBPuVE$+?ugz`KTU$Eab>neW(fu
z)~i!d`WHmLzCm12=#s+k7eF<Ib8q_B@b&mp5op{-V-aDHIMqjCpgX6eKp%IO%@U?n
z8GXjsAJPDclVAuFCHuBtsp&^;$R`L@b@jd~>*LO{F(NmqhefadM38IAjT;*YTl={%
z3<m#*$P>E_mt{S8m8=Q%*N@jD@F(9xjU-kj0BWB)S*;_k5@`7nh~$WP@hE2d!5I9h
z99(1v(4^zyVvh*u%Ug+9-NQd7q$?{VvaAuK#u)qwLl-j!tC0#SU^D`8B9Ozd=*Fp;
z!3d)qgFpS%8|_H1MJXTvb?Dqy7+H{}DWl=1@?tR-EDC=zdeCN?I+SDqL?};JWlV`Q
zqm>Pcho7oUH7`<A9ECsq9x%TUkwZl?0r`i$kP1?Z3jDQ`El!10UCNoSs+KtXDPy-z
zc->zRz~JgXA~RV9{4si4%Yd5Pi89D>_|qLAO5hdYtN;eL{<eLbt|_%Y0e)&~FOGvq
z{K*g~<+}%*0OE~Vt%(so6lzJ@Pvztz1M*1x$!QqHQY?%PBY*@Y#B~SGP(Cxo_>k$8
zNdFa!KRtX2@3Vy=p#^~N%YTN#KR)uIHzkWjA{Kupfs&H3Aq9{hZCoQ^|5M<ne6K$7
zT$2@zKjXb(#vBbIlmMD*L;m6cSOWZHIynBzEAjZpeIrlAk#L0K{dq3p7$OCJau69G
zipS&6SRmm$sXT0$iKyV2uUNW*rXeF;W?46;yoh1r1(|?9-Sha*bV^ttHd3&V8X&Gg
zyPaS<nKXJrO)2;@tta&W2u5uDK;RoV1;_C5`73T~{*)jj1%LM24BV^v0wPG3gAc$!
z^pgM@8TY5<FCx~TxFC`PKWqOIn1Swm=neo#PZ)P0|4~?e`=_6Dbf8SqfA;H!>x50N
zU<xt8h&ud)if{|pXwcYYTxlIQ5r29rrqF_jxwjfCI1Gq}B!szp9n2O+Q_C)6OjMgx
z{CNSyZ}|d(pahfPA}p4HtYdvItNcl^M?q;a{=5L9w|s#<IKhjEpm!HR>=Qd&;<r^u
z)c!vB^8#4MuAGG~U?>5=z$MQ52s_gx!{0;yg%8!*u~^(R7R*S7UpMb`T3>?jFZGYw
zg<CjlRJgnHFCG3~_zOKCRsxW@A$kCWKO$Qo?+ere{(kt&pT>yk1HdmPjU)ovj21tu
z*XRfK1&Xs`fXa0LTULZ{Yr16l+w2Vv+N2I)2hhEBPSwPm!<6dOHn=ZPe9q0KuqXa(
zDx#Lda!)y-h*Qyd-v9tHZb6<R)fe6usBf^`7k@4nRpW1ema12$p$Aq1<f@WTCf~xB
z$Lf=9%`RwhFKQ4J_QqcfgK8<P=DVT1J{Xr)5BBD+W|)oJ59YJoDcF%|GTm11;h{5O
z1nljp4ET?B@Y}~V@b1sS{%lGbqpd0X9gXOrT+5eJP`!I<x395(FdOdDkIOkMWDfkp
zHmIY0<?h<EXIbtpk);JGG6&sIQL`&G*>dn?mfo2Ke`@!?Ao<!G`n?1!4V$zS(D(HU
zJ6o;EguiO*ZJLkZ+0`uhZLn#aK?#!5-Jsf(sYRJD<idZ@E|4gJ?T~Tn;EXNhQGP3y
zeE9eLR;`RcyaeQwf!tc?YJ7^F?Eo3^w>c_RAQa+`x$b=GiRGrf5J(v?P3TT1ye81n
zg$h~mAC2)aR>za-t|h;Lt;bg|WuR(}yQyD1;1OyM^5Snlfq@b^93M&N4`!iwbZa)4
z&n+m<{bGJr{3kp4wjE@}BMhdeyTiA?n#XMe2o)Y2=fi*4UJt}!69+rfHm5P3PIqVX
zLG|8i|3GO70oK%EF8rrt0>`8J|Eq(jXn+E~K9>i7X}9xguj_K3U`4*+@P%}+up8{Q
ze?;E8CNW{LA0dY<_@kLU4@H>5nM`*!X)HWigoEY6=0bsYm-H&>jWHyF9Qe!dTb9Yu
z;?~ao<}9{=yS=oW&p;Bo!U;`T`qlKEdnp>pfPWBverdYhpmx}J)d!3^65<&=WeF<C
zAb<?`YqVHcQ@FKvcp?x#g9TRx1MrK(*!6SB{AAGopq3Pb%1dpw_J&Mc6z!9Lfo+X>
z*W1<BZ}L5h{n2ReJV@todHN14uN2<aSd&AN^$M#yI@8<!z_o)NlXj}Bh&{Kby0viA
z;j+aYO-)I;t+5^0Sq|pHr!_#pgzycW=#4+MaN%HYR|&dDp7O(a4TkBz@!4#<gRhO6
zi7#uAp`FK-e9#a72~N0(E={JzzSgl3KhR_3gn|Vjd<rpJUhjiH@qx^PprMzkQms`;
zSN!5h>f6;aQU28_^2>`JOef<{e<b%nyWY*`$vNWQuIdMR_jC{CFR7gD5`HShpjAAl
z;?KT^vxeyg2U}Hf*cpT#s#;LbCM1@^2uET&4S)VU9II%3M}_cpm`-<lmxd%Qtz#wO
zA3&(@E2L>33s4BBFZ|5jBX!G3?<}O?AAo<Z{JOZ%Es={;fE&K0H~b?xU6mq$6#Rv$
zmR`|kCy;=I!%$Oq^oPG7a7*}HYTVXuCA$guvk4#dV*d_kt~7)I`VLiFTKSpQcqg2I
zKb`Q&2!6q+BB@R3xNxp#<kO;G7MRb9#ixVf@u$>(wVzG78a}CJ1ayO!5^O_53jI6T
zB@{7Q$np5&biXp0MYF-46}(IkY<xrCn2aP7FFJ^x5QxSf?cTL$mw}KpCZAMHe_)u|
zGx3&LML7DhTkKNpX#9a)SVs3a6<@_oRA!aMH*g_gi(Vz2TYfqs7LI8A{m?vZ(5GV!
zZWR-NSiC$?A1xX2lD3MMDn0Ha@dpcRiz$}Hd^fh!c@*#mpsR@h%NK`I|DF8;0M8Fc
zF3*j_pPL~WrW??E?aD~gSBFu5Px0G^<MP{4__M3av%IH>I|AEY%dD;tAC_ZU@EJ}S
zH7|CzwMF31f5bFqr-!y>MS-7N*5TgVm9{llm_TmPKtv))k3Tyi9SVKRzh_w+G~<7D
z3jo4+<2x7$=u=H<{5kjsM1REWb{{K%=s^+2nLk5~f+OZYwD>dd4~qV11ojJy1-`z&
z|1JSM{B}xgMlBl9_5daRbSN?~`lC!)P%Rb`%F;Db0?LGk5`TY?SLs#XiC&4N@>(YN
zBdkG?B<2P%EGqHQjX8Aq6N?h!!d!-K@pLx$Hy{A&<!4pYrNW=EKIwY`h?qMUGs3?K
z0gTX!5S0Z|;g8fm*X{=n+_0Dx{*4F#Eeg?e02Tf)3?C-l;7K4e{2LJfeE(lF?AG89
zQ~t3zRu5R+L3a490ES5ddHjI2V~TN~27f;fIdn8vFa-EWjQinZ8`m4fq>l!Fe<EaV
zSHw?KmX~{)A|9Z@-kgemA-wQ-<xf@E%YzD_d<lH!r3@8|)8p~4*<2|q7eVGPqDaCv
zwGDj`L>nF#OJdRci^GkCxAC+%^WLY=cQXF#!JM#f?yTXix-p$?hp;!t^KwoIrECWy
znxsylq6+-U<(R__zo6A<x4DaWH=x~_5Up2^NDcdn8akq=Q*0w1#vd8uLd7Cy*+Rs3
z*O9PYjrAQ-qw4tA<s0^<+#ASrq$9Jb*{vpsKeeaTaLNxiss(#ZK`=4&#Tnnq!&nMb
z+2Pl_gmlN+&XCIw;ZJc~+1B3V5*0udLgQ@YQ3(n7@Y@72T*;*{%LHwjQz%gojJX2%
zQ!{`ek!lE~?}7HkwLSF{;PX)m`0azR4-cn6u(MhE<dvB+{zT$!IQt3pv~{AMu&55{
zN`YMG3C-GoOrVj9oQ9L}hq1^I-$iK9g{s4C@`!12;a@Uqk-Tw{!Y(&d#s7kqpgRH;
ziuhye18pm)t;ZoWove|Tm&LKY9eNJJw)LRieH8UjDGemzk5o;QQFTdCm!a)Jj@PM4
zniLk6|HU-nw3bkW5xb<cBK~k<c`(llZI1w>#RHkx)&R-27DQJAEgG`~0s%-Lnvw8_
ziZ&ShAnpkbFCbkl{Pad!od&}$FjyP}^hwBkOZWqmJQVzJ<Q^VdQ@O5E2$H2O#Q?j2
zfJ`U0gpxmhA((9me_t)_hdQQkf4T(9&?5j6$?`YP0>x<cpNu`5hpJ!L1!PO-KdU^N
zlt8)pS~ixD_kZ*8ueqG(RT+qfKx)T6oRDh-pz5Is^6pv=mL~hqX<Fh0ru6zB#bl7q
z`UVgcaxp)wjxj(%^HbIX7wZV<z;?sOzTv4c6IzJHpB|Kk=_2m{NCcBrZ6#=oQ!=WV
z?=GtVpT*Fayte63ff7I>{zR@N>*Oz3Kp!z8LPMMqe}(yP&;!#Y0zl0Z>R&<t!aT5~
z|JcptgdZq>)HiGC2s8#o@Zw_5E`Za}Y4H!vKD1L&YGvSW^e1#9$3nCNj=|rqt@fQr
z+`~Ly#TAq{V6!5^{-5~$+l+H}AnXZ;{D9#m81Q~$BQxI!<?I4b0Q`rxdHdt5hh;S5
zXwgr|Yoi`V1|IIsK`j38b1BhU;1C3g&_S`UfUx+Z5JSo$fz|_u{(v`>Z6GUaAoqTw
z@gIR@%Soh=^o^hZIP=EgkBoml_`PABKIZiJ^l)zu67aWfz{}>%bwdb`7Wx1RfN=pF
z{vK79!EEq*L1*f|f#U{p?^g&jXpE|}-aB-Wfq+mi5CHQ!27^Bg@FGHMfh4$pV6wr5
z<W*we`nX6@anW<cQGu{jH4p&ZI~n|e`sa##JVtxGJx1f7o=fxJ;7V2tAPqkXqB{VM
zKZvjS@CmdiA9@jY5A?aMQD_cjnwqPg1QMN6Q&;=zYcc6sX#By*R~SFHZ3PS7Qovs5
z69b&m07>&qLGt|fNb?vWfB6XMo@o62o|DD+yKl+%M1M3wW0T4OkQx?7zPZEe0}<J%
z=6U?<xd1YRq4D=Sj@@{@;BVCfHaF_&QBBPu9saD>z5A&vfgTI&$Fp+w<zU}il}?&R
z4gQsK75`%itIoIsuKwuTmjOD8yi&RYZrN}pkUSiN3mz*X`{SP$;5muT)m~2%QQ?Hf
z=Cu^m696sTL}Bdg=#Y>ZDQZN6*OI;n{C)f1=oo3h2oC&HUCfy}+VbnONABEeLtOcr
zMY?vqXxBhmEb7_)hC&iP+WzRDN7#T9o#D^7Qy;Bf1)F4u0Vq-(c3FuuH{d52D+!RZ
z(=`5+gCidgFw<=gxajR0yQaJZQlnkvFPmoU9@dt&S{sn0IA8@(K^?g=mBt?jcqubq
z-5gWi?QuKn;DKKpWHLadkUCeKvc)Ny1tZNrGyj6@PeKBsC4ZTDuLv*saNrLGGDJXb
z2ia+APsxk69jMk4(gKkBkEXs7rd}Gi+vnpnE)-qa<7?L+s`ncLcWtz#)(j<#$9&S(
zWEO|S-yeRZB%kXDB2&ECqEQrl-!uWKsuVBfRgVsucr+n;17?J>KotIPcoUs}s1t4Z
zRlfko^S;*MHYTF#<rI$y(%2LAC#T})27myF6f}iD@NcoUzlz<4Q2hcol+yyeoZvAQ
zZsPvB6GVqXo~@+5LQ3H8`8S*PiHj*F<={K~!A*im)hS=4Y)l6X&>$V4pln*M?2OGx
z_@*2y2Z6sYv$&*I8FDUn<3y&yy}8NjoaK-bWLq$g&7*yP$K?nA;(}4XyW$}*fxo|i
zH^%rE=nwEI3>P=g`mal@fx8;40~BOTip*w|1ib!=!!wLO=+AmpE&~3*CyiYslghq2
z)%iBBOROuQB-O5ZsQ4^!OkU2jKxhn%@%PRDe5d^W?P3uc*;w>5eE2JbfUo{_y2n46
z;iKRoDz^8-b0ORItHH(hk9R%lkZ}y*Uyt3aT@i^I&lW=({ibcdZ#Hk+`JE#8%70T?
zpWpG$JTQ>~yl9Q10)HmEh+T(E|Bl{FxsSz`eOKE~M*v<Mxy05UcmG)C*|Ynt79*Ij
z{*T(5y+ZzhWgNT3-N4hf%=q2H?v4{*b@nI59(wfwHX;Q6zLGW7AkUGV;$Vf~&3C6q
zf(|gW3l36R+(5yIgGmB^vgbI=s#+i7CNS;Tsy`ZoQ3K5(2ome0V8kg<0)KLP4>=C8
z?LjX3ftkM|6?TB5V1fK`RAEQzc-cjV!XKDf=1I4fO_YK4@trKnm>&Us@dD4%jAQku
z=U==bL;2(p@V>yFw!u#&d&n%e56vbtrEUX81#4<#PU-&$X%o?LHpocX6fma{UpNL>
zV^_Cnis5TuWFnKqALP_GGNK8f1GW^wSwSG5jB6nRl<}8=PLPWONc@4PBRdY?>=0Mr
zOSME-Mn;o)<75c(m^y(`q<j*IKa3_0i<5C{<bm<0x-v4it%u&B7-t~Md)m(oQZYP*
zKODNXDC8wBSesS)+V6wNpI&DLw5{E%Zn92UJQJi&a|19W#2A*sAH<)e-O{w)_Z~a5
zTRDDc+X?GawB^qP+qkV#INO^KO#r^)DC1B6p}+=~eL?1*FRfr<`hXU(GomPLs{~Mt
zgJ8JCx0?5g@3#m;Lg~Nn$+E4fjO46xLUtevL!ZVd;rd`dDFe4EpBuY~09T%N#>*xX
z{WggIa!OdOG+Lsbs<B*P_$fD5R}BM)LIAZ}IHd7FyMC(}#-`w3JO}^myiOFB2{*T@
zjI>|UWWT$YWS4X1MM)4_0)50I+lvKG`FPOf!haxt=7hNj^_CAR^z6XEE@0ha;^@p|
zh(1jSzooh=<idZLaAMXOb^(4zNFD55iGR`=#c!<!iRpp@P~wjQX&^=#{=O<zSe$yG
zB!C!91h$3?5M3PB4;OiXzSfB3HY5P22R0f*`CrdxV>T%GxAqRCUH+QZgx?bL%1MGu
zvr9n`e*5x}dp{^wkC!VJ`-OE|tK~is%?AWP^j!*nassC11i?SqnU^*ePi_iu+e>42
zNq4RC#S;P(3iuTQsFE3OU3&yFBJoufiy6#p2(;VrI8h~uKOFG1*cXL`lTMj#&m5mm
zR4<&eZ|HOcH5SL-FR<W3Ce$420rmK%tIZnR?m(!xyVMPl7JEBggub<nBj64^D6FD7
z5`UPv?y6`?2X<|dpIoy0V|C=&l3gYSI_TKrvE2EyF^CQP_66g%*fiDsde3`}frEem
z8t|I>N_A^UDXZFc=9Y^SW4pG@YXh}VEVk+>B}=5sq45t30Jq=<hSR-5IKI2L8}2!?
zvh}L*%8j*e3oZrtW4_-AwsrN0-RZt6Un5c(6XzYD?KODov4}`k`#X-)MY$%g4eEe|
zpV9x6FW)!XKG|uu;C1n@UV(4as@;pD?2=u)wP+=QIEdRG4}NgOt!}?-ufn{(*tJlA
z>n${Io>=TQjzX}KZd+a1(LJ{(G5Qbp<?8BTO4XJvTf6&?RqDEQ^Cn~yU$)v~Pq<ql
zwqqsKildz_`E1#(6;|f7Qho@gx!!I&Q=M>@IXez<HLsj*oB*7<e3DuGix&<YEE^h`
z-_`bXwhs(o>s=f4n{NR%+GOh@zR^gv5dY>6*wl)uv^r;%q}7IIi^oPl9cmyYd@!GF
zd%GF&_1h~;A-odsw}Kkm0B1Ja(KqGL(d22iySb}nA$!*}ES$X|oJV0XX1RB#Uhb|R
zutw+jV9R-fsp<k9+RNSA=1XynQ<+;lnA)}DR!)xB=!k1dGXBk7L|Vmdi7Hp{+m+hR
zMe8EEzEGU61`f_0e$jsFwphjOhaL@0ir*dka8ZX}D>~}nwwDT>_a@HkRrOA%MHP@I
z+<1hiRfoS2mXK|i<NL`jfOpT|V~TmQJ55InJTL5(IOVkx05gE)I17cG9idbS4O40A
zl=ypAgK7?(JD36N?e)2@```(Dm<@hzzcSopeP*$Z!CnNrkyo8|t86X)R&~Al6An5z
zr+PRe{Lunf>mv`EmoD_9)xJHe#vht)y4`$dv%()QfL@FQUX5wNw}lA&tzX&+xw2kl
zyAP`s$Yn+<_wK$fby7L*Ex0KB3;wotW_v}l!_Gl^af3us^fj0|l7Q7-1K-_=rb&2U
zZ&o3)H`{5($6BhQ@pmi6UP>S`;!?_PFD_klxq34{f(-4g$?>tJvlss2T!)r=c;A38
za2K!c=Kt#he^2~J-3DX5__BMuOs2bbv>4xkX<cW}TJvfDcBhked#GN7+woeg#qmk&
zr~kIDshxT3`<J%KpwCGBkuLWk@^-LSXB6XGub=3Re^F2Q#Xakq)1v0I>`pSr&V$Mf
z5fnj@G%da{*kse48l#I@@NZge)B2EN|9H7OZBrA=yj$}%lxTljkFc6sqICL`wYO%)
z->QW_KseZ)ARTKyAX#>r94e&6nz_%V1CVd6`((1~+t-GCrncDAnen%_Xm?(!(aKIt
zSLiys$*zam6)To)_WsG96C%~yT}^iOs#ONddG<{%vg1#2RxePo`+-wekJ`EI{ZixM
Ll>0Db8uR}EsF|n^
literal 0
HcmV?d00001
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c
new file mode 100644
index 000000000000..1789ad9d90bc
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c
@@ -0,0 +1,159 @@
+/** @file
+ Logo DXE Driver, install Edkii Platform Logo protocol.
+
+Copyright (c) 2016 - 2017, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include <Uefi.h>
+#include <Protocol/HiiDatabase.h>
+#include <Protocol/GraphicsOutput.h>
+#include <Protocol/HiiImageEx.h>
+#include <Protocol/PlatformLogo.h>
+#include <Protocol/HiiPackageList.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DebugLib.h>
+
+typedef struct {
+ EFI_IMAGE_ID ImageId;
+ EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE Attribute;
+ INTN OffsetX;
+ INTN OffsetY;
+} LOGO_ENTRY;
+
+EFI_HII_IMAGE_EX_PROTOCOL *mHiiImageEx;
+EFI_HII_HANDLE mHiiHandle;
+LOGO_ENTRY mLogos[] = {
+ {
+ IMAGE_TOKEN (IMG_LOGO),
+ EdkiiPlatformLogoDisplayAttributeCenter,
+ 0,
+ 0
+ }
+};
+
+/**
+ Load a platform logo image and return its data and attributes.
+
+ @param This The pointer to this protocol instance.
+ @param Instance The visible image instance is found.
+ @param Image Points to the image.
+ @param Attribute The display attributes of the image returned.
+ @param OffsetX The X offset of the image regarding the Attribute.
+ @param OffsetY The Y offset of the image regarding the Attribute.
+
+ @retval EFI_SUCCESS The image was fetched successfully.
+ @retval EFI_NOT_FOUND The specified image could not be found.
+**/
+EFI_STATUS
+EFIAPI
+GetImage (
+ IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
+ IN OUT UINT32 *Instance,
+ OUT EFI_IMAGE_INPUT *Image,
+ OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
+ OUT INTN *OffsetX,
+ OUT INTN *OffsetY
+ )
+{
+ UINT32 Current;
+ if (Instance == NULL || Image == NULL ||
+ Attribute == NULL || OffsetX == NULL || OffsetY == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Current = *Instance;
+ if (Current >= ARRAY_SIZE (mLogos)) {
+ return EFI_NOT_FOUND;
+ }
+
+ (*Instance)++;
+ *Attribute = mLogos[Current].Attribute;
+ *OffsetX = mLogos[Current].OffsetX;
+ *OffsetY = mLogos[Current].OffsetY;
+ return mHiiImageEx->GetImageEx (mHiiImageEx, mHiiHandle, mLogos[Current].ImageId, Image);
+}
+
+EDKII_PLATFORM_LOGO_PROTOCOL mPlatformLogo = {
+ GetImage
+};
+
+/**
+ Entrypoint of this module.
+
+ This function is the entrypoint of this module. It installs the Edkii
+ Platform Logo protocol.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeLogo (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HII_PACKAGE_LIST_HEADER *PackageList;
+ EFI_HII_DATABASE_PROTOCOL *HiiDatabase;
+ EFI_HANDLE Handle;
+
+ Status = gBS->LocateProtocol (
+ &gEfiHiiDatabaseProtocolGuid,
+ NULL,
+ (VOID **) &HiiDatabase
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->LocateProtocol (
+ &gEfiHiiImageExProtocolGuid,
+ NULL,
+ (VOID **) &mHiiImageEx
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Retrieve HII package list from ImageHandle
+ //
+ Status = gBS->OpenProtocol (
+ ImageHandle,
+ &gEfiHiiPackageListProtocolGuid,
+ (VOID **) &PackageList,
+ ImageHandle,
+ NULL,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "HII Image Package with logo not found in PE/COFF resource section\n"));
+ return Status;
+ }
+
+ //
+ // Publish HII package list to HII Database.
+ //
+ Status = HiiDatabase->NewPackageList (
+ HiiDatabase,
+ PackageList,
+ NULL,
+ &mHiiHandle
+ );
+ if (!EFI_ERROR (Status)) {
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Handle,
+ &gEdkiiPlatformLogoProtocolGuid, &mPlatformLogo,
+ NULL
+ );
+ }
+ return Status;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.eps b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.eps
new file mode 100644
index 0000000000000000000000000000000000000000..f40df6b0149a9b45e2b86a42e074a11c7bce6796
GIT binary patch
literal 250982
zcmeFa>v9`OvL@JO^9wT5JLJxEwMjc8CBZw}>QpxgiYj%Ns<fi|wp<wu1V9ok5I_T<
zN<1+A+gF?Yy=MDBv)|{JxMU_ss;c_f?wrFak(qJv@bGZ=@bK`6{O|ww|MPzpzxvg$
zTL0&N!f*X~isyfM^Q&L|kN@$jUw!qzyg7Y#IGCOfpKU#F7cbtNp5S5Q(N~AZKXi{z
zJKYzP{&X;!T>iFr-Ru8wTD+ZJ_a=|N`s&?iIUfGD=-e#3Q~Z1TX4D-|FQ?CkvjuWH
z^I>l}o&UBF(8a6q_-3)3GwI3Or^TkU@YM+m{Gr$XQ2b>y9*;u3(R6a$TLSpzLD_DX
zn;Y$YfIOPsOo+(Q^wV#P4g9yeU+nK7<J-~O;i8_q_k5?lzf<gQKR?(!K!<?SbQUYu
zvcKz1E^m65!|#S4hhwyj8pqTA&Gm4y1U5Z%bv*1%_KrqNA<oh8ay03TN63CP`TMZH
z1lGSTyvDb~-e5Q{{`29hb{jPP&j5D#YQJk_`SWnTkm4l7^Y&xp9dzH!N0TM`$HoLW
zk}(EHH>2_3`<v_Y;a$|k(0$t3-YDJ{z02!j`}yA9?q1Pf7CX<kw{|uaQfE3@_C}M%
zUthoBV2&myqxoXV#`n7KuF%4yH$unT8{0*D6SRE{nzNJI`}V=+Zt?B#Q*m^=94;Pz
zwSk|lE&kr!<?n+7{_b=<bqhayX71J&bGNoM_vD1Nwbt$~OYP!^zgcQ`m!)=hPfi@>
z!2!!09I(s*epvh9fTa!&Sc*^l%~G8XOLaPg)WHvbv&_i}b5BlocUk-7g!v~YT1PQf
zd=(#UQFB?7b@_X1>+x6o%~I?Wf3wuq7E7^Z&ts4H%rfi|f3x3C39ZXMF@<mJ5q}dB
z@pj1U5ue#_{$(lliEXl!;>VuxnUJ(!C-@;oq$SHe{)&H<(n?FEmDXeq`@!FeyW*y;
z6LYPpdHk(EEXDruHzDZ=YOgg<M~pcv#s2vSD^;{E`^R*?v3END{H>TXg>Njy{_(et
zBDsM5^OluIoCk<Gv0*Cv=a}({&umxeM(PkcbJ!Mtlji)Z*s(pfqBZ%OCH#kF*gNM;
z_Kvl+*P6@zF@>d+zu7;fiPq(BmSOK6f90I5+`utninc&lk%!qDd*j?j%=yMr$`R}z
zabX(!=Xmjn&)TlijhGV)?K#`yKgElGS<0bnea&Yod&k-;ne3mAr}mn^wG4Zx{L6kh
zH3<3fSFFXpu}}QXe5I2@V=6g<W!NL<4jnPRX`3v?5#w)`VvqP+X{{KsOr#{+j?{2m
zS&~2AE}wObI-Pc#GPbe7zp546_OrREIq~nN{A_P)di=XBKaaoK+0mT%cSnBq_B1{I
z-IJgFeNE?IZF}E-4i7aa{ymhRqa#g^e~;wn@mI&kniKyX%g>7!njZhYkRMIuZ;m&A
z>oaMiPfXJ{{fqu>Zg;kKPL5AV&oBIqk@><JY5D)zYAZuxhJG;_aDIL)HVIz7#3FeE
zYiEH8Ke2Sa9}Wk@0qm*i&AiXdB=7WQHiNyB=FaBR{$jXPE3bR_@^$ysHGmfF=P=Mv
z^}iN*iOzI7es?<?cK@^-jYrGd?z`>HhZlZ*_{SGNbWTuVbL(#Ko#}j7Y(C#=Hx?tF
zR-zeA79fU;fScQOC$OP%swl<Qro#-rnXe(_NmJ$<kaW0Mbf)9!Ja4H36MA}`WOQEt
z?T<;K4A$G1N7W>9#q^qX?BY@J@AT*2ZO4oM==r}tmj912|93d%zFHq%^lrvb^<RDU
z=h5&-I23-E(@D`&2L)zC{KqMumP0HnD}Bs8@Zlg&-rNfKZDkU#&yK;L;q!iHI=h{Z
zF0YpGn)u_B&Qlu1&+u#4+(M_fi{<co@!yJ9lm7GKa6B&FveKeJ)5H14;o$kBg%lZ#
z`pXiA#thCP^r-kSnf^F=wCdl?=jfWHwwCjoVG&Dx9$h@T0UW6;ekid}bYkDzDVSai
zZf3<fy&T2tX8EW*A6z_IosTAiVlce;><^F1$zV0P0e+H-GUX>09DeFw#ia4zqIk3#
zPkUCG#Re<}$e#hY#aevdDxS3qkb2BEJ!iHwc$UUCQT9<w8v&X>UJd6%B(!GJSz-Sk
zwLUY2*tF2!;dn88^chG#D*J<KeWR9iTYw4`6MzQHdsT&a`RUQ>62{)})38shAC<F3
zcT8{DqgFXK@0q;ks3t?0mjXaVza5(r+y%&H@u=ku6r086@KMa$O7pft9*Tcd*V?1j
z%ASh;$N6U%PP5r?uzJ=eQwSXJN%!*Obzq{)@$|emM&~f3$kSKtChRvaT*<laeZZLX
z2Ghy-wl|;mZaH8j`EfXqccX-iR!p^SYl$9^gSF~l!YB%buY0pDo2M{zN0SfTN$+~d
zM##5ISkfijs*ngi7Q=sVFp*Qf9S-b`%<`m*_wG~V3A0Fvm-FFp;$^guBuOzVCk2nj
z5GsY-64ratWs;Wjf-L#uY5!w{s71|~Wz+Z}?d`8HswUZ^_ghLS-Jxjy^zPMn-Iu5D
z4&S{fHaAUV$=+bZ?&ShnO{h^RDFTgw$dkMM@w~g3^$Qb(zL?k;tRZE%xi~bzC+N$y
z`Tgnj46B6ALdR0dUH9f6vNno7T-Qt3?#KWERt;z=oQ4cRAX6BC(9|(0xDG(O=nYgW
z&4)9rI;cMC9ln?>p_Zo03oLS)yFC8UJ2oCoFu4qtqW|ik#(~N#*ze8O!25d&@9$Hn
z;YLzlkG<UWXgQpZNBE;9U8(gJS5>MErUmq3Ew#tgI>w8hHvx&7et=N_9qX-TbjV0^
z%n>OgVIqRZpOaH#51_KG^c0F|Mqht(!ShQmcs_>4xExM~*f+s$0TdaQ%*~Z<`g5;^
zO_JeUSbILao_>T%OX{TvV>@QDxWFcb<X6dbdE5QOOwg*iz<J0ALpFm5C7L13Lw<cU
zu9n`PtKRrxIi0ML(Ti~?crgZF3+*uyHVKN}zDG+m$PASPszwFzsMS!468Gh@+%6V3
z=a{jU^-hzm?h#|wMIS$#7(0?R{3y!Eq$Jn!AjHTD0$k6R&YRrUbN}wODXz6_NGgCw
zDXkS4^oj~CA*ZM^fCSeHLnx7z3S_N_%Oc7d*P9&HN<sutD2QJzpOW|S6U$U2uU1mT
zO^epVtyb9BoS-Wmzf=Ke$T8tU4uq>(%Oulql}@`X*BZZCmfxBH(eFmS6O;D<Q@YwZ
za9i_vI_JzpQC6GU#jakxf=*KllOX^Jv{oUrVXe*zRQ4v^IxG6vV4a6)(#!=hS!(q;
zN?spr1>>Pokm>;?sTyEN2elB5hi-2&=wA0=L&3PMQco8K4RX4?Mz>hUm6W{&?bC`a
z)HG40NucM3Ol73K`AVPqXdRUd>7-X)4&t)8vs>_=8i%44gMweo`*&pz7R%l30{^e6
z`yI?i5Hf(Hft0@YX9Ic1oKMeZ7w;f!SymQcp+3tS&&}XE9t=N@Xpmuw)^*JCYC0Zt
z!&n2BtPZxwt_c%33@`YZ`Q$>H!{1g#U<)kIOexX20}KnP(cChl5($41yXV^>*Q&+!
z%~+wd-d({`C$<YQ=2x(>g2k))n$Tpx__rcx(vq#<B14k~#iMdQ=wDAnWs^&-=EZ0{
z3@XJ2ovR3HZZ+_peD$<9>0iN-48iJOIYw$-qdH8fZvXoB!=qIzSy2$KtS2V2+T@Dp
z$<y-m=KKU1$3ujJ3=6Gn>lj%xiA4#jdl$}h<%)$EdKOqyd5>5cdr378QZXK4854~-
zuqjzBE=Hr(o7m)p-1*_{i|z~}KI}4QJJLi!$c!sv)Gjc+B7{MJ$`l+?Q@(dZ38-py
z=Ln=FgL#dve!dV@s{Qgp3Vb7AM(}7KMj%#pJ*=NWI6503C|q509(vSz&)?Zt3HDgZ
zK}g{J03&=H72jh)xG>_884Iou7qlbLQCj`qO{X6~-q7a^qC&#xZ|mC1S5Bb*=~Ape
zpaks03r9-UofR(GSkEF{^#yL=6BaNk=96wTvAXJ}vEjS~bx4I$eKSIjATm<YFhsdB
zVJB7r>6L(N2k0_QnTwCbMtLcq1(DV|wIn=7_l<*UrF6}RZsJ(M%7-L!U#rzFby$dz
zj0YdArzA_>LnAwT=zIjMN^vl;BjnFg+(-liw^2a#u3k06YL{dc!b!Vqyu1!Akg^Fe
z_Q*NgQ6evwqd?3ObFpO!m$!`jYwWMno47)}sS$S=$$c`-aO}I1)MZ*aiN}H)Vgw+2
zHeHOkmU`4`V^L54pEJA^K4yxp4oBDLHy2bus_YT<wRkg}V;^mXwFr!BO4^>t*M2b?
zj6T}BOsc(tbi2=B3O6V>XisHBwFu3WNg_EwOox)CU&DJlnnBZsT8pGwQ*K`0G<4FE
zs_a+_j3vM!;IWkUlZ8YkPw5wVF&<ubth1)C1<zQk2_1DSHspL>UG(6f48|HXSgRC@
zv5^Qg_FU{$lU-@q%9A1(A682oFD*E>V@4D_ZG)pCW7}#;WrM+FdFNpJqy$$mgmEoK
zQXUo0>O5Hm4T7%GPh@;?I)^#qSZtr~yKhc6Nt)Qcb7`w+C46%h=|p`x=`Mz|?f_h)
zoA;D2X+sIuDjP<mkO5KV!&oTmoPmt*trBf!u|{mFS5npprlntT&cXC#{eT99Z+NSi
zOfgE3ckkZ!kRU2htU08cB~-cb<KisPJoGu&K24oi%W$hmAydbnSM&hW<rtqxYO@5*
zv@;Ph#-rQuqX<0bTV)ZcW2<m^2BAo^7N*ks2d>UG)?!V~==iitwYPLuHv^#1orWmO
z2^le>;D_FLneaofEHb88JLEYBrfdhn5}&gyB%@6uBPV*fN<Pt#T4#+cq(+NRh(4nw
zauOvXWmU|4AbQX$;UTgT=US{AxHCiZ3PvjD5Ni9RUtq^fRSVcyu!-^3sq0Erqlds(
zU5o-?6j_kU-1g%fZq3RxW;4_3NsU{cKKb##J|(4n<;<}XPBAH6XVk<Y;zktqP+I0v
zx3)~Xe(|)|Y9LN3dmGf_pOX|DqlzVIy9{^g7}NyXZ76zMe>F5sjk9WG!t0wc00?WV
zf!>HY8i1zdWKz=~NP`Pb0JK_3uB?|}Y_cj8sZ2_e7Isc#*Dk4{_Bj1J_^~A>YI0aB
z71MUyidPLR>r9`s=+V!CHC6O7zD$$W)0Y~z>B>PkG}V2&%yG<<j%B21q6F>pq`XRG
zLWCw7B;{p>ZR~lVVk~XsO*$CV16q7oUt<lkhjmiqZZqV~K}TWkkEe^OFxOj>QXK6D
z`5p|x1Y+Z=6NDb@n}sYe5KlL_ft4zAUJ<vqU%r0RwS`C*PKY0^fX%&NSZvn9-fMsq
z>_QfJ^6i`AyB_u%{{TaffvZp98-%K=<uQh}IK_s?aKR#6^EQ;(@iN8QLJVQO570iH
zl=n2Y-wutfZHwWx_rcj&-&ThkhLJqm09S3QS_C1=)gpnsJEx<yd2NvXK1|z)k-o3Y
zcC|N9`m0AptF@kUN?{+FEOllLMVUd>=f1YMc*k-FY{abcO>YUO1~-EFsuq9Izv|6r
zJ!}?U&@WeT*Cc1xAV#gv(kR}8pG*0k+)HOW{DR0U`_st+XLDpm8^Gq}!p~+g0DtxR
zC2Xb968?qjYcBWFHG0#Gq2dH-0eY*uEoDKi0S0U0U(`KH6q)0Yj>#caY)Da?vz@I&
zIRoIR)D;#t+<ntUSu{J{QcvbTWD=Gcur{mRHF-&CE1qKOQ;X)OSS0=x>TYktU0q@Q
z;;v1hkaRem2W1{fV<T*ugYHPD1L33s2HOzl!mw-zgsOU7vA#)re#dleJ*F=x86BH|
z-A^O08wGrx=pT9zd>^dFEfRx53JgDumfFcyOLpX>2)qv*h!(<vV)p0pR3~Pm8mh?}
z!Tr;z0V*;lQ~{u$!7uAfA5tvX?u>Xy4JmdzCC}Xq;MCEn(6(xb@&iY_*6oG?Z<&R6
zhX-cAsI8bd9`t3ITV^dSU<%rB>7Rr%+~JT7d`k$F4sFBG=VRXrgHPj+%_!60w+6jL
zn*kVOX74Yk#){3AuGPp7VT}oQp9YPgz}b#Hzn2I#Ec9)&<QhjcFK)wbiR>?mqd4Ex
zla-tIl0L6Kg7kdB?b@Ac7jakWvD76tnuh7EDZ;FjjdgG`o%_y$4Nh(*a#B*w6Y9%W
zS<546<fu7knmg`rMw6?>fflmWVK8n1FtW~o+@?U2>7Zb0vIAsGsH8+4xKm>t@@)Bj
z?C(S#5E2xsNQw#(o^oE&%`zC36KwTZAR0%<<ciu&w|H#0q>!j&?0WL}uf#_3R0Msx
zvZb=To-t5SSBe;_JBn>82ho(Yy$~Tk5uiRR$xEj0(J>kJJD{m4A%Tx5-I7ib0$=W^
zwjIJMZE-8o7H~*4)5DN3@)!n6)}MlcOfA6UP7;!Ku?K1dVU5)rLroFD3R2Dv>Gn;e
z35dxqCQ=v-A<{W?KOchDDnJk_#c~xgSwTs)lAJlH{{^*#NmGZ0`}*L@r2Z+bSYk0c
zm&s0#O#1NYaPRkfh9l&zL+f<KzbJr38NnkKA<IS*ciM!B1w4r$;k&w{iPy4odVJJd
z3{ySiNf-%c)1qbUWvQDzY9WH6D%hMY&E*mml4K=0Aebn69W$qi`#)vZ)u5-by=X(-
ze$ueB>JwJ;^+Ke-H0i#d#^x{tu!Y}_X7mrs1QR5DH0jPYUE@@Bvz8rjw&BA==XA%E
zb?+I_Fgytcsjb(<Fd{`^SaoR<++IE`5(5rI;+WWY>1sVD3*GW1ypGa2xFY2ysx5Mw
zQzWCtO8S|IrOva1(E_K(#)$Ll&3o62BnUW&OIDzy-aSSo3#6BA4_T~^;Wi_d&PkM|
z+2DdfHQgP^a0r-*vFhwuQpQRr`Nky(67CI-ZUeN$P7p7y&>My?bkCa2f0ydU?sB0?
zPWrh$Zmq-;6_nEc0(|-APwxuvpY{sA3LVBu=ep*)0&Q}aXDK1vr|Qs_E@O#lMskT6
zu#%$^Vto>vVi_)zB=&;tM|M3Li)kZiM23qDOAE2$fJ$xT3!}ESWP(jQ+})8HI`cmH
zKPFG}OxCo4b~7|uo1aKDjyL`n##V9tu6I5}1Uy$d%xLw*#?zVQOlYH%yV{}Uo5Pnc
zzB@d6@g3VrDxf2*eYSdcHCphD>F2M%-YK4K%8`d}z9F8h;n=kz2L`pKV>rHE0xSj3
z&Cu~s&Rn3bbUw|x%(9FNunk>-z~#Y~nXo(dSC(+t;@Nd1B}5Yo1Yv$@i7N`B06VAH
z4Hf_$%@I9TqAmz4z_tVX!<eoXR^Kp(h15{6$zcf?rFODKXQ@Ywcd`_gmm@rH?WpcU
z4(()TUQN~Dq7yr-8xHE^XLi~L2YWoTv-b;~*$E`Eo;<1^+Y$dx@Hs`ADfSx&>M!BY
z3$gXwPF}40YLLX6v0@j!?CPF;nEjv<)&#<d<*?{|)DVL(=gfPvt5Ls}-p6c5zf=Hx
zT}`;HCVZ$SFbWGkA6S55Y31-1eIC|0Ggi{Ku!$F1rMX@~<TqfLODqOFKu`L`M6s5d
zQy1L$uV(?jdZqqtZ=#V`Sp{yc;lNo#&h2nKp8nX7ArZF?=`pMeQWCmK%Z!I%==jT8
z9xWuEjh0T9el=YzYl*#&)6t;&-KOlD*Sl@A8YBACws}&6Q6$6e->2tUj=JViUJR`~
z%MMD(dMag=cw(uRHJp4L&8L&@^g{*;mT9-&gL{mF%_Vxqdd4Fm$T`{I57fi%!m{_*
z45%diElZkkhd%8%qYD<ZVSj`p1!?+lj#D)<e=fkjjVN_dCaYs;0^W3qZR$~P(S+z|
zf};|=5~(TkLJ!Z2wcp|SnydlOozB+hF_1Rx2<}H>d+(-i^ay@atH*j`vfFw0+CzXd
z`g=a7z0=XZ<`ncyh9ggK#y@M_NP-~r6emk%z<HVsUpk%a-5G9iT6Se+ZK985O8)~d
z<hp_Td+`s}G8lHijn*Xn9s2s{3`?EE^5wiY7(r%B>G}Y1yYFRn^^&JgM*Xsb;L6MC
z{1$PalL6L58q7o;oUA+5L<vPf7X+e)!ZLB%sxdYnnDWE$wku04wi{MMRW1H%U{j$Q
z9MyFXPduvsd^F(#0idX@Yc?OlxO(&9kviF9oF|8}B_Rstf3L()xAX*8oYutxq}`|G
zS8f9O#ysqt)JT_Lc=!D3W<%muL}AS8tyYem1uBaz=_P{gWDdr}F4jeO3uNc1LNisM
zFDYpk=6oYvd{WcdB-l3LAzAPwo&!{*Jys8>Zo_P3W~)3!L&3|3hLNboVPm~buh$|E
z-ZoUW+U`O1jf>v-LUHATxu0mHwTnxdUGgJ)^|F)=wp^a16=42p1;rCp$=IQazi44G
z0%MI}#G;oPz?)jOahz!0k-N&t?9mD*=eQZBR$_lV>rQ6ND;z`}k1%V^wA^qSGx(fj
zu{6#y5)hVG$k7^@=xLr{@>#;w1R4a{vK%p7^q25P3wvmN9*mIiNEEuY$8hvVGWe!P
zeL%eI+|b#3DWE5J5KxKS^xzM=YK{zKgc&JG!>kbw+5z2)u$Rf?z>~sB_A9w$CTIy=
za6}VOveW9uAJJ_~c*a<$ObegyKA1GFTR3h$OZ@;cv56DOMdwm{5ZqvuJllN~UnjQN
z`>>ZdE6HybkTmr_%N8q7JFH~rRITKrNRgiCIA+ovASv{A6~4x&U`?SrG_tq|2qy+?
zP!PhEYSaulPfzFF>%}Gc=hDi+&xeK5h?b<-zX%5?za5T0BFeYllNmt{jFJKRz41_9
zFyealEHI&&7(y;lvyPRSBU_BfWd=D~_KNxI{CtYzCE>Vxv9&9kJ0gYYGfp~!$H>1K
z*uNDxD>^|=p8QwXPL|P7Wiq_<+-fyug{qJ}1bPt56o}j0pr6QEJHYT99-bH%PF?s(
za=9wBo(e}O7MD#pb%&*-xi_7vJF;XAtJM8SC8tbnAm9hd#v!gB!sL*ec0zL1=hUy%
zid)p)RGp%5Rfs}eTV2HgA$-*L$Z*zEv++kcPD42~OJycqWCA;sb@i_WZl+}FrR)aS
zY>?H<%KuI15?1b<7V7-Pmi*r~R$#u?chaGfs00ZZ(zT&39oKfQV5r2C;wk^IquiW!
zyo@krIElQnh;^k>N-*EBFkzr!QCDFwlR<NZRviHW;b2+*6Rw(IgBg&tKzf`dYQ>6k
z#w+j=D)Vf2!h!n58IF9Erw|T3yIj(FZT@{$fZr7VeSV*pdUC`Q&rfUR;=YK?vDI3C
zlSO5%S~Tl6Vl~6`?1@#fCf`@v+=flTqZP4c?97wby1uQnXhYT1m{(|S%{O*I62gd0
z24q8h!@7cQ1n_{m%{bu7*Y*AFV3}X(Y#6<OqZDcez5$P$-FVV~pjK?|nbP#WO3kf0
zRo2#as#d6JY+31;7jABA&A4gTLe<7Tst{;v6pi<f-piC+aW9JZ%S{Z^ca45`h&I)6
zqE0Kt?%HgiURZtoHKbvQ8;y^kqi~o}R$1SCgDJfNNtGgg(;{$vka#roBu$bbyLx&E
zLo5v%GpvY!g~?z%lr&x7NeC~nSzj#Xq?Iwjn6hllmx(GGiYZZBtzS!(64tpq$R>;<
z4~nZ3gO>o|cqQ-^ShY&JbLYEL)#`OS3k0{hrP{nK)D4iBad%OJ{q{gwVR%1TBBrdP
zk+_t|BJPy(?2v%Fb|f3_5Z+TArmkdcamgcSz(9vuZHT%>go=UT`AOp*XXjZ)-M~ZV
zIMZdtX`~2&LS`_da#uOmFEV7(sBoH`qRHy13p1~%X(XW3jGP=CrRp1OsHGX9YL2G~
z>H7OTq`82e6~FT)kG#gQ`J#e5$w0)5Faq%C%fx_{>Zn}CTbe{$<o&CNx=E$gd?F%L
zyn$Esw2vL+W$~tmGsg3$Dj8@)m(u2+i8e&u0lU}7xgfZJT=)a}egTlhN(z)XPOxe0
z{C#>1Kj!nAAjA^lNPG0HC)ST<&k$Z}3y^9}n(=pJUto)O2;3J%8}3h<)DggM#Fj7B
zqR0JUd7iDW%CHnzR{|@rP>8FsYB^$9%4(yQldQaXfm&FGS7BUI7c&e@)S68+m<-UN
z5bNP**LBevd&z~cYE}=rP>TD&MhZhzKmzP$dMF#zjGo@95RPFRUj&jfFhOezj-e1f
zgQFwDk~wxk$JLO{%aIYpJ|+k*g1}Z-$IFdG60>UBJn(LWC&rAr<$g-@K0s(Vbk8`b
z(nDX{*IH5J&3i@U^S(KwkC!XyqIIQSP(5#=_uve4Af|pIi>W^sSYWGuZ6QKQ8S^u@
z&e5`63zl%1FcrIy5wc1P$VW3dkijtvn8bl`+%(0hpx3e`)MiEwnkj^t1E^4y7%Nv+
z%Kc)jROym;AjgWW{i4j54w{e!d=fCJ@q&z5zz9MgsKjYD@Qjfg24%Kp){*he2K8}~
z@D++GXM|RSVWN7b0J&Kt>uBL`jWi30{|3|G;z~R;4kw$JG$ft<ZK{&ap$bHVq%tX>
z6azxwIg*nSNu@NospidMo)nST6^EknxNJ$f<*_;3SQZNhr+VeT_uegaUwS!pH`%3U
zYQ#1d6kuZboY|uJB`mKhR60-T>Oq?oFartln@H}$ky6yY{C88c5kZXvZ1CBxyM980
z1S<%yi!f}0YiutlV265%Ewv|4EAaYqjkgvN5=GaL4GFe1rsEszFiWA)^$@$O{ceAb
zi*>mCsKA>Kv7I>j_`uQ&-bXI?$*l!A!~JnEcy4;*bw$!{dSEsV7vOq25emjz&>Ro<
zyH)bCtK%wpb|)6Yw{w8$ZE;_JjRoiH-lsPzL9cL$tosgCm^AJ#DbkT0b5X<Je1ly<
z?2*7;)nXR6N(%&s<Year`9W}^nT&}Ea-T0B6D^R`p{W%Ch-iwPBchoD@UZ)=ibiH_
z%Z_RoZ;uht3qxISV>2}s3uHxA!haU*tu0a29sxyHCw<zS;x`J+`=V6oJJ{fppqrU%
z;Wz?GIKMm>4%PjW&)j{Dft#*(v@3ON0~b@zX{4FZ*T4XLGAW2nkikzgMO|4v2iuRK
zDSGAcMuE>3;XoMhQn|8d6EQr)C|+lwD|FjZX+EUpZ5rCbO04>jifQNz>#^oT>c!9)
zGNoDGvD-3~97SD<d4a5hI^1m;YJK)%X>T;AwaH?>8ygx-u(xt8Ud@%1Y;D_nwCUo4
zP<YHtJ#d>n<zsRMD+__xv*~<^K<^uz`<vObDp6g9>ztL>)Jp5BC}(<)zoeBIBKhPm
zz4-(YD)^2WqJglXDqq-=2i_8cJL<3l*qgxN0Xc`AD-Lm7&imsChasnvXADd#py02j
zgT?cL0h6I_4>uNLRgF>rGc1JAg$(+C6W5DGdLSF76xW1P6q;-P;`!5m`4<vB*EE62
zAJ$dzKj9<=0Er$@LpuObSC+*=p^Vcpa$rzg8P5ssUN~j5EF)nnNzcbMMvbH4fKg11
zDqB1o-dZfcJ_);eR&<cirDc0D?!IuQZwN~KVe&0Q%dk1HP#1{_L8$6=ThSv$;jkGr
z-guX6mV|hQxL?gGGI{YKfK)FpwRLPR6{xgmQX<M(RyZbyr=05Q{0Z@GPP&W{<gypf
ziS*_f&m35Y$n(N$peHaWMD#fZK;0Quy1W`&;>Z>pIWj{vIm8J#GgJ!P#SCk(lPlip
zWa=XRFgVV<6(JacVn!5$g(@8z{!rHJl{eO(AK-YED}qmlOUAz$ZvjzZuP?6ctYgf%
zrhbRpcNzpoukR@=J4Aimdc+ku&j2|4R`Fj4!Q039EbxIEm>d+cgpsLhEGbL^F+1{Z
zAi2qa=Y(`qQc%PU<<t1W<rG69AJvHmF+}=#h`gzo)43Xv;-;Df2;pjW30+j8$Uz=)
zK#LuwwxU~5w6E|loZ(@SCx_#4IM3sx&4pQYR8XxhGeRjF3h{6$>D<oAY)>0&@s7hU
zk9N5ut`*$8`GN{s<%=q?%7ZJ=AoYLP4)sIVim%A84|&Qyl9qXqtb+Bv9%l-Kl0+-b
zQ}z50=K$1Rmf#jKu;ZG|dJ_|@awEi?`ho2e9uHAA0>%bBjCh=uv=x^>vI#Za{rZLq
zS?fCNdZ3jnISKidPgIC>`jtZRQk8`;>ze-|4Mn9z9|w<}k!$>M(`!l1HXjX!aW~y`
z8#TL8(mQ!?#i&+-VuFVG_8$|55iTT_^%ST;sp{9v<Q5fc#05?|M{@eVsEWv85|Aln
z;v=3Ur2$<D4j~!qSfr7&<vT1zh-7hz=q4YaWL{6C8V6|-+aTCf(unRF)Bm#i99$v!
zwv~4`5gW19!idC?5bgavkk1VehY*G(u|z<{jCo|=FWD~;I>inqJrr4PqIpo|Qa2Zm
z%wEY~l4{AL?wjhQ5R!x1zkgzgB|rrs05!RV?gSQB%CIw$%J-{oLJ}LBN?D0)B<4&Z
zp#vai%w+0oi#$O_2&tfLm6x(OgS!hINvut!jE%J{xBYp|BuRk{B;{B!t{LYs?OZUQ
ztvi)YdNOxU8oDXT_xDqZ-P_TYg=?Ujpi)#ZIg17cmAwZY#I$QRmO9HsQd{@RH&@f;
z6p>!D;~P9ohTq{JXS6g7Ty~0+#0lj2H=zS*{j*1WI!~$MBOW`lj#I>1W{;Ic5asTh
zJD!wqP0~bs%p^FCHfcD+12)7YBXJA(^iP4Whi}5O#l?Xx!DJ1AH&<Mhg$I~H86_+;
zM5!kyi;}wcE_T6n-cGjGP14h)E-4k-?P}*X#Ag+kwA3?zndRE06-=(Li5{|SC3zak
zy^?d|aditRLcu_yFhCTA%z=4^1QT@gV!Bnwzto)WunmqpQr$#~UEFw%%er<5#%JNr
z;RZ{l1_MOqJNGu)rI=K$ymw*>Up7BFFDGR5@IPuYPzK&*xqA;?0JLzLPTLBwUoGPF
zc=#syGAHT~*QyE=BR^4IR2GsJH5HShD1r~<f51{6cW!Z8KTwv7GxxPy>w$$M8!7>P
zUd3M&wOO|a#kmj-=kufnE(F`gjH2Hpi^dQu7omEnpK`KSM}3W$42G074$!JU@qj{R
zSXVG)p{NzmWPC{;VPZQ4$giKdODNJ3nE@tYI2lOnot#w)$@y$ULbQ_O=oK1iv}z)f
zRDURy0HIDMgOJb(#p;9##UgRmP^v<dxBL*$FlAq{@<<;UzWNnp@@W8?m@H#*3|=p3
zl~8u=5}+`ByM`xOpLB)TPgSx+Mz9eh9G6y2q$IEHl+OUD{G|1xMCH|uIkVa_^QD!;
zRG8OQRUE3SMCxi^)JgSjl-5d)#jmhk%$;1&%M6S6GFG^{AZEltvtT}huKUk24vE_7
z=tUA@lILR(=99a0Qy8=$0CBe<n5`Jts{RTCEK|KS+yH^`eVV5blA)w_OGo=oIDUM9
z*b<XCqyi?6`JGVwTOJN2jI96(Lw_fX?W9N43S#Ox1DjmJ1MBe~enATqQkcG!AYbHg
z_&NTDCU--#x51;!6v0HDdKgjEp31IWKPSlJ)w*<+y8K88e(b}UAw&!xSwJ~xUB6wu
z<?kXhdd5R0VCNcPcFe;Qx{gCFY#rvWTC>Xy4u@zfFRhqdD{XOizz#R~37ATac+A4p
znV&up_+%B?1Wh1onsrTHG!s*dpJBmXjUH;j$98stb1j_Kz!YWYHPXgx9E=Fs$<q3o
z5E1s29I6)lfWF>PqM9B36k=hqflVg6)E<rk1?^oAFy%z60Wh-%5YC9aK=2#4*$Ws)
zAO%X5a1-*cwM;ZZ9zOgKiZPTYFGgcZF@fuX(uDUXPnn7@K+y7Mf)<d(x5Jx7?|eKw
zUE=ucwO!b!tSF^YmNng3XWfNut({)sB=h9bPoN3_C3Sx93rQ%ar+*jdSK^k^$pkl`
zI6<M4nyxQHRU5o011)dx9lx@bs#v2$df}nB^A_Js9lAFGSDf&g`C~BLsUEL(Q)I1F
zMy`(zd0uI*cZ|pAJ0k3<mgy*L$~jklT{SW_cr2*CmeD9Ikt3)xsIT`~*-$GZMylnF
z7z)&0oR}Dp&c<11gO|n1FaReQ8p3GcMK<L%%1-;NgQJi47POT+2OF@%R}Juvgm#`_
zY=$grrnx)mbYlfe@9*L)Jgpo#BcKoF8a{Qq0iA3>z!bY2mr$lj2X|FU8e*yP@knYZ
zq7WV@h+{_@<9Hdb5%^uOEY{$tK#WZC@=$4%!YVV-Z54$lK{SxEVb>`wcEnF(&T+st
zTnNB1g*|4L=_)DU!7e#J#qU47FO$NM{o1%=Wn|X)J);=0cNGFQ<HGHfm#Sp(a)FzD
zL}EFah-&sGj?AG0z|ErWcvdK}T6A!ln*08&RExaChwgOYS9Z-xF1u>-W=EhtC!*%q
z;Zg$chM<RI_TU^R$C?F(ORt7_b9_?fNkQuUQ*o_b?^x6lt+RHVeQc6Srkr4{p}8>q
zKr+IdQ^A7wErhOZC2rM-HGS1a-$0KPA5l>W6eUi2z%yvE_yMS*-V1yyJz!FSL9a>t
z*wea#E1zyHOe^cO%~>D|x^uRssVW4S+J6G^<X+lH!FA)lnS_wiY$A{3KT7ws{zH|{
zF~WTl#UsntNMEq8WQI9DuI+rAP8WCY(RL`Qd>Rky1wJ+63MYtSqk{rJiO$jl7n$gg
z(DWAMn~rjCEiAiSW@Q2AWf39PRMw<AE4tZSROLP^xz$`Ut{l@<(neS#`Fu%A(lcmX
z4hy5i?H-Q-j4mgL5?#Pp8%nD*Wolio%tLD^3VulTKO6|LS*ulQqots0GC`i<$z`7S
z<ItAavbWQJJ`(n~R@KM()uNLu<%7mdi3;a5T%UEBjv%69%$$%y?zpKDRZ@bDn08+@
zqZsFcd85WiW-;q9vd`jUvO^gY6D&lV#hgUyV`2&~*U6AoX#D82rC{M_yMdaV50bCq
zCD7qf3m?l%lDEPfA!`x)u5vP2prN{^P5`i)pu=A=J()u>;Y3RMpxzgnXdu0KBCg4X
zF$zV<sjdO*>u#0TZxkiA;qqe7abqUMI?-Zxv1!WbP6;f9xS;gc2Pg@yFdXeW)kO5}
zuIU~6#{T%I;1#`8Op+dH!hKpqbw2MV*78R8sPHwp%JYooln|qACz-_dflF%q3|Vz(
zsR5`Mp{cX*WP<m7NJv`GWwcR5BcO)}=oiUnvv@v0I`0zBX4y<dGfJkj+`|OZORtm5
zFdjciDid|vylB9nCW32xZi5=SRO4~GjS0a`>xMm`?fuKAufR5;91a-3G!5w@4s`j1
zJ%5P*$O4dZq_c|oetfDi9-=TFsxQ1#&FUhfVvTn9=m*ZQCNj1#Q@zLJID12Ts2vft
ziEjTzoo<x9L$8n`wbh}GKv*Q|dm_Xk<}xTAr^bUA-V3kc_rMPcW2yDkdG&(#tPc)@
z=1g=Sy)eNfPs5zBVjT^66ZfFkO*(-nr?76$xhaBCt53!ww0+cZ%4g}vFHSt&8ewp%
z#)|mH(0Xib46(YN<5)t86HmCL6@SmiH^Z(kr~&ZdNSBT<5PSImdPNLmHStr{_n96^
znEs&#MASmzDS@I~*ep7}rly2Accs&P;^8vxiVmZ7Y@_kDYZxZMi=Wd_+#KuA##gwR
z4enO`GK@CsxK)$}SC?wlJfs8YtnLWLc)57cG*vtSkK~xAV5-PaEyybywbO6nai%vW
zI$Dij;S&$q*OY$dCNKQ&UA+t<XNB(@t_q<=<0%H*9>(o5DdKIs!THF|X^A>3kB+9F
z;L2pwaQl7v*V84g@@<!Yv%gYUdfYDGjc~WyrMzr?^No+Bd@LiZ3`pfFDT6sKO4fV+
zoBV98BHS=E(vJM{n(>GN=`LX~S#+?BhP0I&bJJbrJ$EeH2O1C(io0<5^>$qPJ6)Qt
z-bOfpoI(|6y@v)UL+OG=ur<Dy`3KvBeQH)Y8zs5%a&yklCVgfrRD*kCpga2G-Tc6P
zk??k#y<KN-{jh`La+d1$c$-&(u%O6I;4pIi{02_P;<`EcHYR(?4@^=by%+E`nk1v^
zc_^p{31u8j=5ZK;@$<-&p-ej?LHxPGaZp0~?o=;Zi~AT73(uhmP01jTZJL|&{xHtT
z&`=Zu`uMKgWKaoH*K;O2xN-Ia?%?eWrjzllxVR81rUxmBXUeDSTh67%C2QC(a2^4L
z_$y&7Yk{0BTnNb6uSB2a3``7V3r?;)22ZFg0m3vRQQ0Lno|L!QF_6GYc>HZh7u|((
z@-v7OK2EJv@lRNVD_)^JeM@)6om_0h1&dT}X>COi_Vs0j^xbs&0X(Zg)8_DvI~@Gn
zTGF&Zn%MEvu>ERhf*L<OqTw?-(KF5){TAv_hIwvN1vn8TFQBI`O}^zsW}r#*!YfAc
zWLkMW#s9oX)31jak4n2h({7gOf8<f#v<N2Z^u}o*B^b(~593$t%8NcnD1Luw^Q+Bt
z+PEmqps#`ssNK9Ekb@5T&2REp_X-rnI4ZEWLwMc#!`D1mIS_-9tfkCG%|oMF?8E2^
zc6*)QDu6A@4{J#&u@PC@s>enc)qltf%@60dn+d0*XfppYa4<1cvlW7X4S>a4Z%I<i
zxJ+<?cVR}gBtHbnf7v?T=HmKU7e^dbS&3{ahnXB&k{>VeZ2+UyUA>78t4utCoU8|-
zC>kN8gh6QxWBumc)TnTcsMjS3eEhO$E!nI=;#ueq;3j0I#0IAn%Ha}pp#i?`kkl|%
zL0*zrMGv~GFJY&#jLtWL7>UcqVy4fD%!W*QM)JtPu#<oTiDqPE8OGHw?sTyy1QUJv
zXqJOgmS!$nU&}C(8#pGR6lZ}5BWz+MW0&UU{FCLhnh(VhGyWu9uDvzVz&nVl8ZjQn
z<$X$?1aj1RY%$Q@o3_8f?B-k+^bniV{*X#PM?J8<u7_W78o~kaiXSn|gw+#YQ4a4o
zXW(>+#HTR$WXO*D49Z8JR3$lvC1!<^GC2i96Ty~^Tc(bN%V)E~WwT*JecSG2(>pB;
zfDcYY`aXy$j$YeV$KCw<XW_h3b@H%k#tC?Xr&ujBT#5t4q~oTA5K9#<E?0tRT=H~&
zEnV1nzNr^7YlMQlatD`!^{@h?44~p>s9}bdHi1?VZYcJ=@hIf!yp85Oum4f<c0B@F
z`_;PZott@jv37v+km-IOUtevX?Sthv@Pyy*S6^RLez0KU)@F*IZj{xC>vxBw8No#0
zMR5rX$ZuLqI^0-aEL~?Sn@F5cRV9!?iRwW;d~0ABr^M1gavhuiqShCw-W|x5N%HJa
z))<S_#Wo|P)}qXf=#`seW)?P?jl9<-So3HtY7S)hg)f>ORR{RfHjb(!bbM>%P<2Q^
z6_ovyMog9kttThN^(46v)xabZyxGa@fGkP)5N5JCDo|eXEr2z-vLhqCjdW0qqaJqz
zvWDF4pSJ`j4QB$*Bo^Ii)?|dyP*FocnwAZMHGah<2d7P2=~$+XwY>QavGNiJO-t5?
zD6=FJIKco%72b*)-toa67?JidPM8b)l2q^>p%rKJhH^&axHhTds9F#Mp+=Maabc}U
zi85m7W4V~lxIBna39>pU$3HTas#0&Ex75C;_Iog(<X)rk-#v{V!?48bF%#oQFD!Ym
zxMDg#jA1DYC|f3_%E_`W=eNwEY+4G$j43W{mP)BS1DRZ%Mb`2?A_~g;Fc?&77HLap
zL8$LJA{BPpg}&TDE6zy(J*N=#uAfix7zA=~Ir-P=?0V4`Zr;tlih;}zA5>wwr}Y+#
zS#Ayc`}KAH-tXt{iyQy08dw9Fi1Z$=5T$&L3k|M|&HsWgOKfmA1@MY~-?#%ntK~NM
z2?{HBeQo7{OsyOWdb!(MD~C?h%Wbs1+=mZV&N-b!Vuna3*p&;xm@Zq6OGu^&XeXh(
zHVlwitX>dhbkVM+i4nZy;3}J-nyO-qxo|xGNE60Im`f&P2c1(UY1U|fpl^CY#6nGT
z@H`hDBCgJkiym&IV`>+RCb=n21%(YRnC>mB9?(oSuem7#X$fGV1yVfH0{vMTKD^<$
zjG3n2(Xpf<-plwA9ZS7{tIY4uEr%B<ki7q%IvIAIm7NfRe{09mF3~OA#G8C*$20ol
zNyxBow^$Y;vJnJ;5AFE-g-bBn_Qo#8#0-astk8Us2JI{DoTtFx-K!91b=4bR@YJ!&
z5lJ%{%1xK?@~7m}lu5qaN(c5zE2>xFj+$B^uWAzq8>QrPhJ#!Wapkf*+P-w@6pn)0
zCzVtdL{S9491ktv=4EAW^~N!{@>8lb=ydx2=DNdE8h!#qloN2Iw4I{<7}p($9#Z2=
z&~KQa1vHAdSehk&iZ9+^6CyxJZ?cQa9JWPgqi&V63rOium`*uIp7gFq<J;6d0sj(8
z;Cr94Z6qkyiXVrsWfMFuYW_I+%rAtB;084iCscDkE*2<r9>S*yJ1*t^&C%i_OQsjZ
zun+KML2fZ&O+c)+aUC}|+1xvnY!xfPY?q;oo$-|6rzPA0a&;M|v*m_Ab8pF?=bQf2
z-;~V^G+FjHV}5|pZ^!(0%m?oXe%21Cid~y%U+Aq<usv0$#vIw^0xv5k`I$07&0IC`
z6mU%=!_JRrwOW!Z4unD;)g%n7Kh4+hp`<8-;lkI72xdcT!{)`@lK^7D@I54Jtr1%G
z{UbsQnpj^(g00}J-Rpy3B&xVOq(h`8DUQn~OI%rp4|pEPz3ZR-b#qVOeIj!o_hO9G
z+)|YwB=8%6*#Mt;c19EgMp40Pd4!oPac0%Bhze^U<dQfLkbcO(8`rAseSFJ`Kz)>2
z4HY$PvtE%4{ZKK=p%1iweh35;;s6C%>*EqvE`}9>`4o56@bwvp6JA!hYe&9_m4053
zYi#_d<SuV<E2{JLr{wwebvRm9eu~e@*+4DLEGQoVBX!)<En}AyH&>dj3a~r!X=NW-
z!{_(F^q=KB&D=mT3aFH0aIQxaFA5g8t0=X5rU7ayp_Pb!B0H-jxuWju<61rl`KP#)
zhVhtZ)A&>eC?6qe5VDmry|55wL#lpf`!tQ5viQf`KRkiTU<P4+N)z5brEg%}kVmD)
zGBPR<>wGSxTmlVfIJPjCnNROiXoK@v&ngBEM47E!@=<TzpGW~5{8C=ix3YJOF;3@J
z04aN)ni6j@#0@3uiRa3R<T*gXZ~ik$1@v=aK>3B%>)FP!Kuhr;E?I573nMG;S++K<
zEkrenJsJV3>A``9u7-5LtfT`mlwX&Q+_bzJoI+DyP|HwBG#p24OsU6@j%?Hs7$JN{
z31fs2(h@D2uKK9E+_4U|oH9VDBb;s(0Shg;2Rc;4fk<#1GUZ0#<h0!kY)RG(#Kqvu
z&<2X;Nws1G$lA84$VxLHrWC;=2PjYoC9`+KHtA<{2xG(TkevVulqmK#nE^;Z<jaR>
z9EvOI{e$NR_=Y$%do>3&a25BVxM(P{1gzqTxh2jcp<bAv*c^73PTQQyRDsJR0MTEd
zcVb=kr;93vPHtA@Kem}ZD^IXnf(5giMut>lH5RPqpPp_;oLu$XjgyWmEApS>6rUS#
zs<Hq_l~o(?QO2`R_km{4<e=VnZOG?eBMXpgh_Ls}W>p_ERM^xC&O_uYt)NX;D!8<9
zq^zx=O*wo4V3r!EZz*#(I~zs`VvY}~Nc@OXstsB#LnZ0GcUtOz2=zKq?xS%}^ipJ#
zXPwm=<|NRvVOByao7{NL1MM{DK#+7Zg3CMNroJ0{Noo{(LVu}<$M{K}-pzRFZvkKs
zwi-C{Jb(bi#?J=g>rnp-!-MUCG8W=eUX8HfYKD_OqmO95oZMW`M!}@Q+X4Y;3$7}C
z@u>V?(pq_i_2;WeAIicKF_;UkF}Xz40~wlOQ0YoSBO(R~M9ZZBaTruyR91+OVqk@o
z*>#_Z@g^J|%<@B8R>dZJ=<=Cin6#!EG{9x6p-PIsY~fpu@|6BArOR$0lYJXtmA9k|
z)ihadU7<M(MXlZhr>_RQ;!*a~83!F4jBXZjT9S2$U?&$&2@3Kg?Z^`kUg-%cp>N%i
zVtX*96mpnNF=+gFDV#-osu8nlj%7f=(aK?@v<OZ*ugh1IsUyT6owcJXOzb|V4D*#S
z%%cGZV&J${;0hfmxk5T|nV@clSk^n3pXfOlpF=_{15c3Vw}lWhOLywqAXMvRO;wD|
z#41X~2;kYl_{{;^%0YK*yNL^Z6cG}b#Y3Dh�ZNv=QC}>w&ZKKDs8g$w43lON>k^
zmyl7Mh=)&C3Ajo>{=;a_rni5p(R`<gtA>VKxXJ}k=A6I51i6)jRB$xd!#SJ<X$3*G
z1|t|L)k1e018UobRe>2c;a&I%*9b)uJ|KCIVOz0l*P6AS@r71x5G^wN7u&Q>;na*x
zpBv1_HG`2_wUoqUD8AIF_0jxEHf<RA)U3@BQf9M-b<h%^USieB0`VT3HaBU(DtDW-
z(W3Q+GSk(erHN5-a&+%z;Gba4{sdz-5rBmA5<KH0o**@e3o3ckU9$9dsAulwm&3^^
zu291FeMF7_lby>5{WQ1mr|@(e9Lk@<Q*d$phZC9pCTc~x=J+>pB9mU`uMjN>N`k;Y
z(SeMbs80#z(CAZQ^WNb+*79)sDu{<Ujw_WO<}^nCgETbwje#|~aEI6Up^jo*bjc(K
zuP`)DnjoH;G(o&|NkSrj=8B`U<BOfgK?Z!Ir?m;4mG1oflij>^a@L%@<)_nS502WP
zOv_I%uyRN^$QHtpyL_EYd(;-wK8cmL*!G(wPWEIzi3_}BRbi7~wu19DCc>qo$)7DU
zTLI~?+@@d&=I~R^dy@rrA|+xm1Q4-+V59xvtH)|KWTkxz%YHZvet~uWFSGE+@ni`j
zz>--1)>i)9mu1iLg?<YQEH3+Pfo_(6G9s3rFVTI05XaDpJ$#Yg%EmZp@Qzh_&H?E%
zy%H*Q@2-LR<CWF(jRMILjUZ1n+LVct6CKsaEOiX1peRgo7D%EFj8y4jov9^^(|^%L
zt~r%uCEI{>iN@>8+=r|~aa?NIR=ZslAa#OyH_e=v-W%PZU*(llXuw158y~Vnxu!Oc
zN3g4@<C}0kS%|G8k#8lAodE?F)As>lGc4zF!9d{ZnZFP>#!F5M`NjL2yv}@aZyjzb
z!;6ONwuf3R9@o+nY7BUo1Et}d{xCV<OQ3RkEzi5VCL1E7kYY(mk9}xpqMmhUy|jU{
z@mqW(uFcGZ9ge?QEQ|#6aU%t#GLj%f<?U#uCn@ZpCqZGdSUVna_(Q+S;+Kgmcuq9l
zC?dB9=s+R<69?Fs2lbBVYQT2Y2ex~ZM2gxuH}U1t(W3Ry84u@TUBoWbkK#0Zgw&^Q
z9-{&A1jPAmS5SA_OAMEthm>aK@a_nMKH^}?2|FIYL9<Cj5iS#!<5~c$3=`i4kIC@!
zN<6E<;MYCn3Kj_%nA%=8^w~qz*7n(BuNZC~B2qYNBoGe|s_7Jp>D6cN>|}E)i0FD6
z`X((}f*uT1I*9=kz@@G7G||FO_1FQhEKR2hY<^LTf|{7zya8gm2r-<}8K2(mbdd!o
zHDjLf0?$1O_KxKeQC4Ce+GnO4na2yKgiME<v08E|ZSp<6BrOY7B9gD=+ll3Oy>pnJ
z(%H>$#DfTNtK$0vfL`R7xD>ym-Ak41n0YP9poLSf4w~xfJHg=e<{TzfpI_p2Oj=1z
zK`ll=dm~8+*eJYzpW~IfJZ+hu6f{se%vG$_!;+L<2iE6|xNRgYNtl@(YfWLN=@x3C
z2#~<R(M;h-2f`>Jy35;%Q&B~yP*=(a+I|^kdI@k1_$SHtp`T+)HWx)k^k~#;7?$en
zV~N4DTSLhE`H>2S1?vG<50fs!nP^YpXkxF%W4MVYj}KObCsN5yB~_>>(io^+Q*5GC
z*aMTb%2_`4%XN5*$|N2LRc;fx2AbqfPP=xLP99wiO5kCly`+xwkRGwIHnP)}(eQvO
zUCf4kgaOKtN$zDm;TQ4<=t=lmo`1#OA=f_vLzK@-Y{tn+yEtKxWMMetmEG)9IQAXF
z-{Y~iGrw^`BIiQ^35`eH_e~QVE~l_dEeM@+Z7wHX2f6B?65)%e3X@fs31#onlyZq6
z$~axvTPLS|u|>u*pms*o5QZ8QZV+1~f5WW;dfpNw@H@g``@}m0{9f;PXn?%R?|wK=
z;nV<m%!d^FZ(6DqP*bLZ=^`yrJA+{8P)|QyPGL|~gm`Sh)TB2Q@8l@%CMq`og$`ab
zplCM$38v&iL6a1VXetF;t=L4)VuF3cP+Ipep1fy0vmgCtbng(FvqI8oJPWoWg|-QX
zA_>I<DFV^K@`IZ`OztkQTU6;mDXTCV(Y7S2Bl>ip$Ve$CQZsLH92%$t^8@N7V!oDK
zC?W%HJ=D0i9Fah|hD#Ztnfc##(*=;KvlKtkZzO6HgEQUP+wt&TJ8MKFJSYD;lr&>!
zpV=pe6K@Gv`|XZg#l(tou_{pGAfzCT?b)JqtG>LD#erfJrU!c^`|6ls#|z;C1kCMJ
z`5{Z;zW#LFgjMU}j^cs;6kNb63bZRc)ppWCdXI`~oON=<^9GG-7I1=rkw3@e@Dv_^
z3(u=O;#o&<vdmkli4LQ0L^}>wdC?Z2a@tBgl7)DS<S2y3jA(++f8zKrz`I!f-CSFm
zm`c=yqUaFWX{B0iCR$ko7|N>cZaNS+#k-?Lr}o?a-G-8L3x-RQ#efG;G#&ubijB9Q
z7A$AQLaDXapcaV}0gBjd+(4V0G*!yTdqNoRYepAcr8re^->Pt76IC$AB76u}jq@|Z
z6C!Oy+7jAu@*pcajmRc?0K>m<0gex3z^LWKLZ%iEMb=U(Aruc<%CfK<-K;=7hyx{0
zUf#JER&aD7QK1V$l_|{Rz?dwiMWDFAo8Wr)55r_SrnyJYV?0AqPPlf|1ERV?B^NYU
z;FEujhKgiSq(!;>Y*3cy&>aiQDgbsaDvw8^uY4UVYj(d-NbGMO3ZcHS29#fTSjNn7
zT*Zt_R_q>^9#^&M9#CIE`n5$cMBV81*?cdf54bfUkURT1L25eGflN?FHIl^^6Y94t
z5w;_11t%XXh!mRZUkd2z<Q+eGvbLPu#nSD=uaIK#y^M^mu|y6yv0nStEs~;FIGLp`
zex(jwYqlbCpBscg)-u87hX?@m2F%oLp2ASq1^{rJ2*|ZP>6BQLX<OCC?rSZWq@l6U
zT4?TzV4kV7=!W-q`>*#+z<s&OekIS<fmO1EZIgJ<iNh@82*xK1f4~7%63*x*yhUjw
zErp=XjgbYzr-exCY_w8plPexNvKf$+`^ntinLzwxs2|$G-INbJ6ltB1Jrl<ixr~t1
z&pmORL`uWxmcxiJxvF|1-5@E)H_I-*p)|kkQdDa)plf~7)8u?}XBR#Wy=K+YKCd*-
z@b*nUnZ87u5VB0_Dxg`Xbl?9T>Elp*84lHMY0C}7NP|+re&MoSALtrI(orB@N+FS{
zc;y1Q^Ly7-)tMylyYM=?j)LJsg7T7lPfp(Bcj4sq$i7@`^|3V3|6wCrKQX!1hP~3$
zq^~0B3JhZ?4+#&NvCzs%3ad=LjrX-=5Uc1YqPd_N$)fbzW*7pA<eE93F{+9>6stC(
zw=jq7)G3(vCKQSO%*^Y_4?nER#KVchdWU8tSJ=Llc-kYhP+9;5uNlDTGmptv0j0i<
zcki_GuW-IsG#ytp&eUlpyx!g!qrB@bebwKhb>xwp>NZTYF}h+j$uiJac$xnyMXg5k
zpoyzFcAt<iV&WJj6IgFDznI`xF%sqAwVY0-#M$K`V1JS#FM38krVjdE<j~ZYt}Qsx
zDDldacIk6aup$mbG2=lYjjN?h1xR^=?psfqrige=O#@&TeNFJ1a$^n4T5{I9bw)tJ
zytg8831A804zOoGv|~I&+adXwx)lnIS6gpAp!rs<{Z{-+9vu_jh^y9CD}M0O^CAXf
z$A#pFwBLXL7ytp!sXrv5;pPXKAt5x5q@>EGnbcr5HGsJ2Bmn*hxtqN&nJI;$VD0F;
z%HMWUY)icsOqWA!!)Zr`tg&<>=JW>Xca6Ca6t-53V-I|3h|h!YdtzKH@+1ZSlEp(G
zGpsYQN+m~@kM%_)aMx95w(eQKmV`eiv8B`2WR;(&)<i8syGkzD2upm4<f*LJB^gwd
zzd$whb7)=|nz;NFP2`F&b%H5czAGI!q(#b_*1(_wsIMOqeV7u3@3?BfL0NJLjTcOv
z;yqwq`$TDZ_;ETK)Bu_BrQd-Z4t|$MPi1zRuflwV2<FQ*tIax%4VkXB4s-Lq$3FR&
zl9IicFnOu9g7t5bDV<gWMF_88eOwY3q$#;Xxdz8={OpwYbEDwr3Ne(=zCP7ZC7NcA
zNBRw_N`?5@b1$5JPJpgWx8<w{(Z5ign;ihRku$Ff+1^BKBG$Jksz(1vlx+L{yIdH-
z`jI2j#e%SyDi8T!A~*)e$VPr8h%=-q!i|EeOjS>V?}RIY%pv03AZ~u1O)?s+HBas&
zflB7XDImf=a00CBe^?$+*n|>^(79;n%#bv#TGv@SuGU(22un>?)`~(H3c=@L)Jl;{
zpKZNsn&n}ze53D7IYYrgJ*-phaKxf7a66}aS)5};{W|kB?+T@(lu%w5(IEjUmb~Nq
z5x2sGqrMk=u&%RhpFsPrmwf?90IHUW?^1tn$}c$VbK_HXF`6CrL0B<=e;kgt*lf@?
z5mookg&TYY?b7CakZT=zWfbDn6{d-JGmcz0llDxzyk@%cNhJ`1j3}E2cP=qGBw-U?
zBw{#-I?R2TmQjoQ5zE%cFI#!IE0YV9vU7UOZ>xkzI$mQeDa?^LEFNkNo}hHXRW1li
zm277jlFCcENJ*0fd}>$k=9G02w@ftGi4&PEwGQ}&w$%Gf#oEVib7!)&rEa(*C!0&-
zmswqBU@vX>quQm#x1&EJK0wzeID*MYLSON5xg*)GI+ygZzM3EoK)v16?FNPxWWzO2
z!akseqFE#W=w_Ai(jrC~+Rj6}kRh-Lo5^};P`Sqj_ObP*utNoyYKAl?k~oYJX9%sA
zpciLy4>q6;tHmPmLa>*6_S`5<;w5aTBexpK1C(aL4(n_se$XJk)XX@y#(qh_#uw=r
z<pv$oHF!A_XHA?2{VS}OY>I=slOPe<d3;bK$v_!zG=-oDC>@nE{gX(R@k}C>_pqx%
z0ENSrb<v;!3@q0&ra!^_zUa~Y4CEnRWjM$6owSN#G>p1dndU2KX-vPxm@zz9o>O7m
z&?4zVu#93Fgyv2mtoO>-Ve)}`#*IG+pC(d-35)6x!kCV=XkEx?DP9&dQN=zPVzC$n
z(KTF`&?b2_cXyaWbU8#gnd_&nPj$A$(N)ZrArM7Z+;U<(L?9E^9sDOKCn0H#;b;Is
z^%$Jr=A^qT%*`}zQzRP^GHbD=lEk1A<p4p)xk57~DN`128OeOeZ!aV>9iV!f=8V9H
zIik)|4_=r;IoM$yL{*;!WXQEe?X%)wdj~8iuAoF}lg{KzbnY*wOZG&hR*B6^kZCdT
z$Z?^t5xUb#IxGn4H7s%=TaeNitA&Xv3;AXX{K;Dhp{2+PN*~Y0kxaGA7WwG7B%_p=
zf<lAfz*!>zk;jvoK@`^7M>LIm*ivIc-8J`&F-FoyIaRBs2ommTPz{kk(yFzIDwqM`
zJ20RZ4JLAt=t!lVX*dQd_$n||6^4WEkt$KC=ujx_t$I*biJzQH!|lXI3Jnlk*2cQp
z7@D9j<jP1|6k%wR;S!7lp?i(>2aQi|u?9u<WpyD~&Gv2RdonaWGDcgFNQQ?L;I=s4
zL%;n&&3641om^2rzzu?AOXG`p#iM!c{e&iUX1spY8Bx~xX0l-v`_sV?pEqm2SEIE&
z2JqAA&AdPS`sCyrOMH#1az?nBG-fU`-&A=tS}xuU=fOjWTlTeT!n^j7yX2sY^hWPH
z52sRu0O;Fvf~$vzvA;?McnJ9=5?`-CY|Jr1Qx?Rl9$E=P6oPtDrQ7e}I#|7Sx?+Gv
z1_S!I^aO1QE%aKRd_)GrvE#xqj0(_9Um7(LLDAbN26F|QPt)^Z7h0v;!P%q+)Hpqe
zriK3(7lVcUWR*pO-&*-e8Yz`v8!NEYjHe8gQWMR14{~I+7WqfEbeK88GTrxgh(LZ{
zylwdeO&O^y-9ST%g>N}w;o_u?J5LcQUf^uUb!@1=5D^ew5B`u@C{liIjNkT?kn8iC
z3oM`TDOijhR)IH&Y$4TY!f-93xQH(&6rbRDopWBSK`M!5qS5%yP(0^E*E{Zd<rmig
z8)M%xxWa%DI9GQ-RM?sy`-%ZlCO){8KtK2na6)|e*iVqA;>)Y_U@Mnz@mV#b^3rCZ
zx=3I-(>p8u46`QcLbbaX{VTrXv&)OhHJx8(17$7%A}x}xYYnB#@$?+Vx%eZYz3lZ-
z%bG*y#XwT(v`JH=vXCRx0P(;3-~VD*tDlItgIieBmIuN6XxuC+(;7;Osp%4?ABz@o
zp@rlnUHU8+n$u>mj)F^w$qU>-J{THBl_)ETf=P&*5Q&cp6&MTAV{hd3$N7lo_2?Er
z2`cE|q5V9bQaED;xw{r)i9>qYIpG+wh?E_3wjnF#;dK8bZuzB0oWqxpQ~A$WED}_B
z7$qM%&P}vU>Q?#W$y2Z-35*aYXnmJVhAeh*^#g=xLITSm#z|Cpld$aOIHQfdd7@me
zZZFg*TmFfg^fNjFdP~oN+jm8&fn2Few%uW?OH6#c4>mow4e`%V^ZNQd(l4rS_(?!0
zFZ)%c(a;49LMx!<W<+wWvwjoRanv_pT7FtwjV^2=i?`||*E}oIUQypz@pgShT>~0q
z=vUyD0JMrpy51UHFRxclXXR_3ev(hWCaSb`W^lAx87U_VbVfkv3SFEuU=kp=6+b7d
z1_!u~-hw1q23pjwE`G#(1Jh7Pif1kRUTiRwR3)HL%C2ZM`<ksXgznvF9$g~*u3(x|
zw<Pg(5_fxXahxxyQru*2)n7ox1t;K^EP(mpQ3w=e$Al(k(ujj@kJrV^sV&#s3hibF
zyBFqadS;sdQ()nwHReKCPSm=u;6}pS9(-62D-P;lLeTk0A(V&biz%X%h8<!sf-y87
z;e#N0FFqxt>{$U_^;-$~4u!8D<%}r_VBu+~#uXa%Var;1JA^1A)W6aSOGq)?$6zJC
zsF`#nXf2)gmN$BO3B4eE_g|EYkaHjQw!#cGXG5$TX3Lx2_yINJLemF2S^OwS@PyEc
zVW@#pYsQu|{k+o7H2@4rS^}Y!q^HqBs2x~l#qCiyPt&W-NhPAhf5|dNc2hIHRCZ%=
zi)^q)>m{@B2>Xn9Kty8P9T7FPWCGH_h=*4tBEVdZT`iydbvVaY2j0Nb1}kr8dt>9N
zT>6O;3Gg^LBC$rNJ7gfT&w4o!O&5fLW;XE>Cxx?+HFSp<gof@Ch31y5DR0Y1zb*-}
z4V-(;rC|+Z2OVHLaIA_=BwWnUWff(1zO0DMI`9F0QWtEfBb&+%fd*c$zN8suXXwSV
zqJ86-%aByAF%S&Wa|~!(`ay-}R)K3{*$xb@_c#CB+o*uUwo$zd=cKTVmac8BR-d6`
zeNkn{<TWgV1r$*(LXxhTiWm5=d(hLL?m!?GsJGsJ&Xq@T0ON=5O5VPC*Sla`Eprcy
z#yZU~q$q<@?)bNsChBi$=^0XGzi8El(ZiOBpZ@{L&ZNZ_KKAY&L$#VX;65T^j>f<e
zEfAMrG*)5XDWI5KEf(R1qs^>Ia~HN;;s{P~*%lM#4qUWAY;+AS)nXCu!*Ri#$Y9+&
zaM1$y;!-UZ;ognQdo>@SP69ihZ9LyU*l8EfHlFY8Y~Z5V=Nnu52l%tOy9;2?_u5++
zHl*(E%is2Hds_<a?jd($^I$gu75_gO0_C?hH}?*9Huko6icP*8>~8PuZ0&<Zp6_gI
zZ0+r}H+J@lEqU4A-Pzw46xv(62M2ox8wae#m)*UsgU!%FBC+NrRFe`BgXS0wmYrSL
z0&(Zc4S!--gM>kVw|$0jcfD*<*&dVaRV5ATXMEzE8!ScrAX3Pvlxs8+*is1W$WSJt
zP*);(Y2#)X#70|<cCIRQLI_IQpol>%=Cbgggb;}9#hi5%Jv|<xD4643_s%4fzfzR`
z)G=+%47e-t&hYw|uRA}yebKd&H~o1;r6ubh3>6)bbHQjn#3vSda(PG!`{<=k1R4mi
zDvw^)L7!hXK$gI~%OO0nFpsCYxj~Y$Q@TFjN(fk;U-~M;jO>DQTT#XT{8E-<X#EZD
z(-;nJ=CUNBJ2bRTc{b!L&2ttA3zkY=R{c&KfbAC{QKN2#MlIJ73FNVXv4xQc68JIc
zWnKW#$*y8$2;;f|`R$vcLvy$Ijwa+Ep!qg;H+G)(CjG1Fd@;laLG)|gq`UnC9OZq1
z27dFe!jZ?4>Bq#u{<v04IEdwKE~}{qHsa#p58C;@_*%P{bhOHvaXR@poTpb-t#`_6
z(RWkflLe2aGAi-m<vBAzE$CYE$yY$Wo1*jdVtfO4$3(1QVC^1a!<f5r7=<rt4oz{v
zl(z*y_cTSat|l|3*t<5}3RlSjn~uq1i5uo8GN?8tmDKC0_Om&ctR@Odoqef>BA=LN
zl)3?S7QDdz4KSwse2C$LV(NGe{j}{e4-i`6lZ3dI7njb#xLlQz>)fP@j%-<iK*1H$
z%IiXh@Xk4{?k~!i=!xh`0YQx=H>XMTb+<Rab=5VRT)}y<>`DfAFxHO$DT22pj{I=W
zkHUd9gSac~32xK`n12<ud1o6O9d)>)Jy-V`{1_hBm~GyAT5MF!G7CKrbzVv=V$}#(
z+XWM-_Gl`@oAjH~xd||`NFo4eEaIJxdjiphNc+DTtzO~I476{ABqM4=Q5{T(^9r<<
zC@8TTxlb%3y^{Sxfc>1T$9yxdGOkiVR6|prHj6;BFq9@i34-X4TlT7cqP{mhs*Tob
z{@jM46ft+RxytD?Z7@*eA?<|eBlMJel^$Rz@Tm?P$9|J2$X-(%4yUI;(K!%Be2d@z
z%El?{>J|a@7g<2SAqg9c%+pEF88?}q@ECS=Wj@mx7Er1L(TfLo!D1NlCSHpo`x{P-
z@nVA@79WPUU9mI8N(Fjrl}ZId^_msYV9GF*b9_A(`c7{a(W?jX)he?VHCDLVkh=>i
zfOYCvSD1!My{RUDiSM8USAtAfJRz&Iiac=<EtS{2$&~H0PAW58L3j(gRt(%)z4=l7
zBkPXNp!eDRg|hD(2q$KP+zcQ*g%3;LQ@T9CoP#Kl&NT6ObEs=rg&UNyD<u)cDg>(2
z<olp@g=B^dv&qw<+Zot1{}A*c)4_E>QA|j^+zn~6OAg*(SzcYN4J9QLfMywT1too@
z+U80$<E1aAf`|$=DmgXCVWR+<uzIH}LV()A3Q!AFZw{jHs?riY)V&zeUnsYNtO@h5
z5)u*Ek-!5X6Ni7X#CLFY-&z9<?g25KDS(O|U)@u!zr1eVzcfN=e`u*Dy~($l%f(E-
zwLR-y4mEyUx3|P($0%Vd$TL=8<?bcAhAl?a;=Y!>N;~*&(Udo;u6{k7&!=<VNFomw
zVB}*bO7e?{LJ1O|59}Ij8!lHesp_RJ=>*GQBZPlM`rku67F4p=TL6~kqs&`)$cPBE
zp?#8!{Hnu1a$)yWc7<d*tb`8*W$KJOlC=%bA&5lFh^Y62;%9St93C8HP~dN{U1l3)
zLFNXd#S)){AutGL2#~uE2)a^L<6&}+=&{4D6GS3236kkl6-KM|_18I?4}<>AHyI;R
z0kl4+Y|VF73=Qb1-WKv{DJfc`GEqFkj3C4YzkQB-z~YfHTFGWH<7!w=&jUgCQW!jk
z`#BCh(p@)@;P!xWg-EdwOa<-$=|1s<F@B>N7i*0txuVUErU)b6SXc|SBvcaO)!WnV
zZ?Li(n-xjpCQZhSf=p9~MOX$AwPgLB-e5NVvC9<|jV3OQx{O(zj|Q9&%IiTiR&^3U
ziW_wd(Zc<kh*Of@1HU|Fr8)%rDA%WdMh|ahAq4{+UuKJ8$e1n8!!x#WaSh?s^hbhM
zJjf=ZD&(QeN|d3fFXOla;hn~2kwIEzwTjEPhNfsS@{!8+Y|+OjV6Y0bY8hR=fA{9}
zhyD^SQyD|Gj+`!D1Fe&=_!HX34zUn9QOMjXlQh}wp*hry&tQ(N=Xv*fh)<sfTtw+K
z4N_$&k}aNV-hY-3-0HK~izaQzo_F%%^Ui8J)z3+B5xesGRz^3nil?0ML$o|;h2MIE
zl2llu#E*v;{O)77^X~Q9DG+OP9tGS4QP=5h2lED8bIKsPx<(9HRCC$H+V5eD9714S
z68gR|PWTIs95Tu__ESZon(w_&s95Q-$eUAbZFNHqT@|WD)^thzH$*aVg0IE*u1?0j
zK#}Glwiz)bToyexZme|NWB?Ju{SS3Xz|D$pU_va88KkLl3AN|yf^$KoW!LD=F=RX<
z>Ty<jj?vy^BmN!$8DBNK``NcIfuccG_pq=Q!Ws$-pf7EpEnU8+0WB08kZ}QRAJCW+
z6)Hk0$vRpezvX0zC_EnwOg>%pL5Aa~!2me#4R8b3$I*N`dGbR4UNeG-_77qKMvDtv
zsy>Cc4eNJ&TzRx8{ysf_Uc5lOI`$BjSG^@axm>(?b6g;=&o4}XRivzEO&7~kQT%#}
z3LmNX#|`xJaKIXio7rqS=gax6!k^JF8_u5>PsJDsn95oUOH*7z*qu&%w`=j_ogszB
zCrbo86AQTO7mD1EoY$o@Y7Ai38^Ly%PM#4$fxxD#>0nW73}zdqVLQ^KjW#rduLxN|
zZ4(ARurpws{J1peq8r^SM1%Qo=sRtptKRrxiR<=tdi1gvh>41&U6PnOLDV$s@mcDy
zjU+S&SwP?e?N`w*kGMN$Dddl@zIrhkytN>Iyd4cMabvB$|F*!6M;{dm6{gN~I(~=P
zIf>fm?kDD)$6tNbna*xuMO-a^i)|5mEZW%ae73o<v8#29(_4)1^`gL6NT+j*FBU_C
z=LPN%FW$21qClfK?ubM{{PS?Wz$Vvky^S`)vqMn$W3&GQHg9^1#qw%?<8zP{1xafK
zdDx%}>fxloptwPEELnxdLP{$}KR<5hxr2BN?|4J@-H@sJ0Qd9b(Z%CCQP{IS(<?1T
z59iQYmyA+MDCzTeGIjs%aVz11F%InAV5XL7-8*+Pd#s8(4du#95?Kb2etrxSPsm}=
zDL?4`WBR`M1sM;24@(B*fNwM?Uam5Ba}gPrGPQ8Z&?T;fHwg3q&Uv;1&yuSEPp^9O
z;ot<qevGe1t8#McVF+77?4W!_8Xmg`#6Ui7>PP6o+L01V#bT6$YY~L8B<EXNKOAt-
z^KnZ@6Lk3fbcSy%^*_j3`sh|jTWpz|fnynqXr3HWU@H0c-m0NcR+-@ik7LL3ZaYzQ
z+}8H`<)2@Z*mlFK@xnT04uz}4ScgP#7v6)#cVB`<D7+qvvcK&9`SmeK`v!tW=BDTw
zvsUEXJN4P@<DiSY9h-F@M^_`ISC4cGtH;*<g#BoYwY9gVAzfVyi&1LtEG6b0M3x}+
z7)hnLBbfuOLCuQ=sA}vHv|1K;3cZb@%>Kc`;1$MpvO%;HQV~Nw{qZq%M;C9Co?@Z=
z&Xf@rGV<mUJH_m8rE&E=w?$*&_=QBFphu?yCvRUW*mkOnLC6t2KqW&%+lGjG#A^X4
zqNTW8<TL)YSn5;3-?s%KJci3DQ#bf)9^P3x5J$Q>k}4xm1G|HYfAB<U|CAhQ2Q?+_
zA>gt*k6XX*3-UR+5taWxA7N#{|Gz-pPyhcWZ_ee)h8129%r5>B(p)%x4a+C&jtLfp
z1H-T9{>^_D_d}<wR=*d`;?i5ykup`QAw?0UtZ*)b>Pn;tV+=Sl(hq|pMeA_LEJWxF
zAZghes5>WUD%p2i$HR*S^l5o?Ga3&%u!X2xZHKOu^L#Y_Y0HT&6eGm5rOwOo?d-}5
z4Ev80dc<tPl<Gpl$1SPDkf23?iU-u@-cSM}0*mu~`TOoEe0E~Nh;gzI<z1PjIAGu_
zYY$e>$7|HU9!gFU%mubn5*ui>nrtfo^JHli?{(A7m|io;*7l(ZZoc;Bm%y~u+S6S_
zKJExd>rqdgU0V1<S~6GULWGFacMw8p+7=csVn^8U{bbfLp-b}9HdOtil<&aGn8fK#
z7Rp$t3Z%4*Ag@DZcq(=cv$<phX$}LRyF{GNZ_Wwcp*z~N=Vc?wv;oUlmvy&DP?f1$
ztrG4@B|Ro}6+!C`Xy)DFRNS(=N70Vdl4hFF7bI9joWAw8$)L#0c%jJOvS~Ws9P|FK
zF~X&jF;8u8NmQ~Y#=GWK%ce~SmQPt*(2rsTVZzdxn+jhlPqzFpG_p56Nvvb#lo3Mu
zGQ|_Mva!31s&UF3Xess6T}T<bY%5Yz%*cw<2;!%}5F0p0eW_3qe((!iSk;HKvfioF
zRj{C`-HLg6rz#+{TLQnIGl2|frB|yJO8Vv}8WEo;7tVCQWv2h{yKhozKTP|jHEP@%
zyY>M7iiK;e^tLx5uCD8GPE#dPHl#@%eFb6gKxGfcgEXex_;wh9u)ghT3j~QMlFHoa
zei*z{-5nRCHj3Z>m++o88dHIK!|XydvBl0&X%ZLNYNb9wZay^Tp=ch)!};X{CN3A1
zoYk`7RB=;wb0G@q5NHJv(1L;c5(ZT<h&0J3$;!gM?7aK7w{SNf;%4B7JGwz<M4UI_
zJd#-mSGRM>p~R6ujR~XaW<2<Q3O~z&UxDq-k5S;yz3~kkzX<-ag^fGk!>U+pFJiq8
zgtC=SOiluepD7v!l=!Tk{I5@Cea6xK+}_-`m1fz2m2gQ9H8haiUII@wzDJ=GhOq)|
zT<KL4KS+jAP)N{Vnyl>#`J1zMI3Y9vU6OYJZnHejm9K-NRP_}<`>TVZPpBw%g}<2=
z46nYp6zqMb9{xky_EJJT2|CWw;i&QwXhx|f3D{6IqVd%;3NLR7j#r>CfT)fRm0TwZ
z3_E5QMU2zVoeWDe@Mh7#u#B@J?g*e-!VQWjNcg3Pb$(a~0OA`JLu=I^gP|>0i|tE)
zveaCt-~(lm`#Te7ZwQ`Copu8CNv|xJ4DS);^e8SeqBZtpl|%CN%F~S}Px)nt6NIa0
z*Q4;%y=iTdDDADd+;sR>t8iBXBt#WsLs{*#R0;hz9*jB&z5UB{{^3xramR4!M3?KB
zvX4C#>?nT6%L%!jIEDDQ-0C>7+rm^t$iy}q2^R37H^G8xV5(JAL$vd{H!CvDmoSnR
zt`3jV1W<B}EIIZ(HY6S>iaU(hG~9AJS9}6S2~O!4o5PWNI_Ccr%*YZ%U%YV1O-ByY
z5e<4p@W?uwsCfgaSFtz<UJs*=F3HY17lb`a^+wIoVYM`0vs1my9yldcCrjf}Fp<QJ
zInzuZ{fsy)ASwtC{G0IKpwYDA4iD=1EK_Gvgyc-|Kb?Cah6EML$%O>x$qhM!3wXe@
z-0Q`~iZ@kA1~BB`hzqLUTrliC455_60$zR2;swr&&&%p)XYKW`W@R6%eTjUE+bg(-
z;m5@levJmpEAeuqdCY3g>9JC+y!upllL_1<DIj%{@TQV#hB`7z^Jipr#A{i~?+h54
zuECkluzZ7wkrVm(q<jv&%SFGgPIP9;)Ir@Huy#vs&HfE0*QOmD<FnjO!xrG+FGB0&
za|Ps<PRAYD*w(^0$-PROsW%*j8jZtj4=9$=wU#-@k<7Ur8tkqOq_k9}`m2fUpB&wa
zX7P;?B`ZGG489x=5nnqS>E7C+$crfD6H$!ZTMn?WhswUggpzGmF-T<DR1@9VTG93W
zvx-gTTQY01!)Atwebb(yWhMQXX+NZ^m0wAzn+dsGdVKe$E7*b)+1f%h9l76%GOEbe
zZK?_NQs)(Gv{rGCMpmCxm!dwSR=z`7P6oOQ<<_DE_Yh;7b{(21G1&454_fhtQg~1)
zi=usPsY@P`kNK)Dl&ybq>tk2C-Y<Z6HC*a+CkCs=Y^EusjFd!c>?;+ilp<DPQHq?j
zl7f)}f+n)VAXd1C1Wot#b%;1IOBZCtrJck8#;!T7L}<!2l`th?^H)d{G&-SzVK_jf
zJFbSC-C9}@8zo3sM+Bd4gNZ<L*il>D>n0<l&c(1ZXD1!p=g3_s^EAo0gkfM$NnkO!
ztb66jD_%3n<iHKWS2)Kd1E0?O%m{OPf|megf8{|c#${Px&_rXPoQ@VSO3k4}@JKcB
zy{6j6$fg}30=k8pf?%pSU)6O>K<3|WR%i^$kMn-LIUq}lHE9)h?}nw^>aJ2?bR1-v
zEZ+_hD~%=*sUj7XY{5_u1Y<f|W}O)QP;aw2|L)cR_F+A0{q!!i!t$@mL}?fO83Ski
z^&Yy2R*8n5p`>#?2V6o0lUqF5JGsPwaz`>kk4;qdQe`BhMjrC1cw+lO@*e_Om&mAG
za(m`fZbP)_3BiKDvMj1QWl&~q>wbgWhD2oVD5@P$>6Imbbb~<DghwCwqTJ-t=+yOI
zN_AwSq<7QFjHLRO5)v7Ij7zTx+f66-!AB|hLg3<I+mL+xCYkLY-k45K&TKh^%lOS7
z$XYXuMLLW^YjL>L<z4^~$aU|N$-iw$suB!Z(6-sx8#EipAd1jPY^)Wj0XGjKL#24s
zivVCf6q199bczH_NeG&<Rb^nGatJUsqNz>l%YAPG=X)Li^|1?7(?AS6b-wC<oY>Uu
z9==@p+HxKm9_vlAT@e;5Zy3wM18-r8iq3e~68(HST*4E96EsWQ8wa+hUk-W}H2rl<
zr)B~)w*vyUv;+iK6H1NfBGtqMNRTamZLml9x=K{Dq@2(z&6Wh_)U79`@}64xYuS-e
zq+)!PFb?CIh&%u!Gn)XaCnT6_33R#q^(&kgh{y||kW5jczg>Aq`;QVbJ>qZZe-=Gr
z92OYR?YA&ci5l=cA43J5jO3z!q1NF81}<YW_As$W#8i`RtmM8rWQR7(UoZ5?F(-Vn
zsL-<o<W%iDPZ?ol@(M9ip9tEjnC&Cv%p|t>HL!u_3#$qIkhe_k6)?9#^a&&mn~jhR
zDX!#RX&dsQxMoYwRQLS;H10D1Lekv6>=P?xq&vuV`P_JNgnNr21;6E$td2!eKv-|z
zs1Ung(9pT`kUu&r*r#~462ycbaF@@`e1yYTuGiT+5i30K@A_f(Q4*5-n8+xFmFcg;
z5UEkBrG#4(mKrT|+5E#~e5*PDBS%q)$w3}miN=i@C2x6hJe>VmLOw%Tcz=^rjO(h}
z67`*5Lu{weWpsseh{4J6Vf?xUS^^7)v@ZcDv`!d@pp?=!3kbDs(Zscsa2BIFPM5cE
z-$K7EF#pM#h|J_V61VyAc*nCp^k%(DyQu^kDx#y6JwP9%CwwYT;TV^76yI9qw?l0E
zjb4u?&;GLYY=3L^@!8uyp8nz4w=$Omk6rY}N-ZCgthRJkv%R&l^Xi!68-3dD0?YwM
z^rB55kaGMS+)qWTe0zIyjh=qTu=9v+&_dE=NMAJ<&r9o6E)^>o%K6rd)81s!NccbY
zKHR*VKKskgPo;eT5b%zJ?ezND<PVKF#0QQ*sFxsDzMSIZNdM^Q=-F$WwY#~Fc{v3`
z`f7cZyv73u!&tsI7s_w{RLZ}000Gf|0_8&^Ur6~-uK_to{U2^7?Txky!b1c;SQ1&y
z2pg+F=kO%)fuj>@L^Y5#^AH4sMoN1Y05_tSV;9Qi$?I9Fe2ch{LFjgBsF=_n>v_vU
z1mA7+T*pL?F~yweoUBe6nyQIIRxT3p$puvJA}3{{;h*L@xaGTuuDo>yi{QBLoGjaD
zH)gN{1<}Q#ksn%EpoKM%5~;YCjKPhi6<X!JWR0!Z=Cjeqr_MjZ;n!O?b?W?Be*3r6
z*SEvz<nj+wQ&W-1$w++rx0h2KIqTQURJbDyUIM16Bh47UJh}(n(|4!9RpmKpA+%ba
zzJu0Vj-I_8Ufzs*^Q6o#ifHHi(|a&|{m0&@POXUOYv5VW{{@hw4azy$OruriYtRsu
zu&Sk}nWos$bUb*AD_kaGmvW05E)+<Fn%_Ti>nAL=<&GCI*KymZnEZU<G8<sI2_(fI
z^P{raMkSiz!Mcq~6XM25+u=cP+n9uB#JyV*ED^Q>xgU6bKE?6~g>k(V{#w8)D)3ta
z&-eG4NR0R$Aice06DbhpJ5YO#?}D`NLr|euL;U6eZcN?Ze{8Gm$E|=oQA6Q)bMD$s
z<ap*}`*!%r1Dqe9mHmwk{A=UiCjM>V-!}g3;NLF(?cv`({vF`oA^siVUkCq=@$Uux
zos|7H>bFt9y@`=;13()9+5pf7fHnZM0iX>4Z2)KkKpOzs0MG`2HUMk_z$O4}0)b7`
z-$eb*9RS+|fK33{1b|Hd*aU!00N4b8O#s*gfK33{0)Q<5*aCnp0N4V6Eg-Ok`dg^K
zwGUuh0I&rBTL7>H09ydC1pr$Bunhp)0I&@J+W@c)0NVht4FKB!unh#ZQGXltw~qj9
z8vwQeU>g9o0bmCJb^u@p0CoUi2LN^eU<Uwp0AL3Ib^u@p0Cs@D4(jiq{>}>k+W~-G
z0N4e9T>#hxfL#FC1%O=u*ad)H0N4e9T>#hxfL#FC1%O>3u#5V8sK3_+uss0S1AsjM
z*aLt)0N4Y7JpkAPfIR@%1AsjM*aLt)0N4Y7eE`@80{f`HkNW%D0JaYR`v9;H0Q&&2
z4*>fBunz$H0I&}L`v9;H00#hY000L7Z~y=YK;QuN4^aPL55Nup-~a#)0N?-s4glZ)
z01g1)000gF;1B=~0pJh-4gug001g4*5C|Ni{vqlg9s<}Q02~6qApjf#z##w}0l*Oe
z909-)02~3p5da(kz!3l(0l*Oe907qN)IUP~qhkO&0)Qg`=m0<m06GBB0e}twbO4|O
z0387606+%-IsniCfDQn3fItWJJE(uW0bs`fa0~#)0B{Td#{h5)0LK7u3;@Rfa0~#)
z0B{Td#{h5)0LK9E0tmc7{THbJVhg}t0Kf|XcmV(}0N@1xya0d~0Pq3;UI4%g0C)ia
zF96^K08Rkl1OQHezzOP~p#I4&fSmxq2>_e`zzG1H0Kf?VoB+TH0Gyn>r<!;5&5ts3
z2}-rswx~v5OUoLU$`{UR)`4NnqI!>XcDF{7%TKQ0qjB_l%ZKAw%N0@4PqY$2qE#H_
zf*KR$&k4lws!S_stVH*`55-?OJ_k7QkcTbkWw!Co;C$LS`bwLR`kjBpl5=QuB5c54
zklcDG`ApY>DVmb9g`ob~t>&usrVS=pjM>my-sm)IRf}gu)nysIK(G=scPLGtLZ;|s
zlbpBKPOVq!-o<GbOqs{xntnCF`Qy>@_Sv^`s4%{2#8lPUKwCCA7+|jQo$D(4Uqb*I
z-C|xbdR^M-6=0~QIelDz#}@)Qm96eqlZz?23GN%2!Ncgl(8c+BjO*<aap3Si15`!b
zALjbCmM4yW%sRz=2;-q#!QdV?p_0}`vxusqzrXaV&%QNA);vEVj;rMKGiQn{Y6;gv
z90Uolvf#-u6}hwk7vW1JLh&`~ZG3~TA>w<8tcxM47xLPpL1R6bJ6bWxCmf@l_aS8l
z9X=qJguAJU;_;+vCo@9Tt^Lo!Ixb!mdviWDO1|Y~Wbh@nP}Hoy6pj+>C#r~=5~vt`
zbp@~qQ%Vg$S5C>1teOS@jmb`TDuGQ5v>T3_JG(F^2XeE3)}zwlRkHCyJ(d~KZ1m`C
z)g=%G=!~pG-g;eQ2vYx4Z9!w*je4js-IsC;z5@kDoeoi_w42}EHuIbq<)0=a+(Lp#
zhp>?+TRFbm1u%2e+MZohV&pd&NpGm|({g%-+_oI34?+YCs(9(gtusH@n>el&S5i67
zP}~P%Tq!!Sq6+pMgnIj&ar*M1D?3c3a%2+%SLvenP=?G+;`pwF^M;=95Z8xE7kSG{
z0f15gX|if~Pxe7%Ows|Fm_%GM4bK@MC*5lVO>&V%EJ!%%GrDwoJHbUVOSlP<>F#}^
zP0ll#>LN=tt!OXen2?sQ9G%nU92a-X;-%oqY@=XfI>&>%^#(dz6ixjSrtBIDvP4k@
zkaUS{$gBm#!d@w3euTutwGm&`3iCpOF_Lk^62H<ZY6)VdQ$+ctT@XNno9pY_bCNGX
zSn<X06kXYQAyK4RG8(ZyKros*wO}^k`g2|yi;5fsl9>aOC`YC?_Ek-Y&|Q?NOqOV`
zk`lQ`S~{*y^(2!Dolkq|{1?>M8R5K73<%;_Mk6V0<`;lB%{+iP&3(JpXBdubGPMCQ
z7t55iA`}m#>)L*un@#u-^fIO(MnUg|E&gWl1yi^_3QtfI7D88zYTLmy#BU0zhHMVi
zK;uQD@>2%X%|f~*R5@^)x%`W~lYe=yaennL$G(O8{dl*KD-hmbEa@?J!%NUm1|Z*%
z#m4HW*xYFIn>3^ge)MZl@~l*%a4<d02*F?CHDXTgPtkm*HDDy-MIOi(5Xt;3HiOU2
zXd3lWh58xq`P`HZu)4NIo`sxU+z$BZ0_`bD<(@2`FC}E-HBRAT-&o9W$#uFZ44Cs#
zEi~ZG?o(?tt$ac!2qW!-QdKFW&G;ncfBj@rxZY9wWts}qOw>}GEOfBa`NC85QX`$P
zIiN1PgcNkV4R&qhBq5F@U)?^%ldV16k`2a6Iw}4RRv6={c2nE0{2j{5q;luxe2BL>
z;nsx3!UJhwQU01ED=`)>sh%;I{=e+K>3UR0vNrl#Jdf^S8G~EcMm0}rz}5%?i$M}#
zplNlfsw9;)q7qZ<aAoJmxukOo-}^>n<gjX$By4(r`$v24MzwN`j5#Bx4V<9iZk?nC
zjWuxxqZ|Zza`!i|pTh0-k=}{UXn&v3jzUVtpo48joy7$8NhXCjK<r3t%!m_+yqI@z
zx&nq}dj%|Mms7dRWCu7ZaoWWlWVW-J-I5%#N6!2}TtO#7JF<NV#^pw50aQPtv8D9(
zUt(XxLjv|ABuB1<;8@0QIx*%E$0q^%-by%30Gue(5a_LV&AE$&y6JRozJ2+&je;DR
zV1*#^!;gg|noN7g*C>M>BHX>8TPX63b~@O#xvs~!GGS<dVU@TI=j++YdtsG0UyuxL
zLEjYSXz#?0s5|E7H+?DBxvIKZEH0u~TRAqdHK&9RtSazcxWUx%wF)$M>eyTW<#qox
zfhTBFT85u9w{shT+&(sT;_AzgLk-vi*x7+Qt)1>7!tr5j_KwQB8390#Ok1+!N#Jqx
zz`V$BsdHM@b3|-CTyf*AxSC+hSK=2Y5BOI(-?*3RlruK*gRHc3q1>Ks6;!V>F=}%n
zWH%B6Rn&0Kvyz_x3rjUNBaBxMkZ6~`*>MDHq>B_78mhY2=xLfXZs;d)JY(r~orKv)
z9zE@@USP~g7}XT-ffrQRl#+jKCzkkB%+-;r+kc?~ql1p}WMPMU{PHfR(~hd~u=nE#
zr>2$<xAiE`)8m6-?=$3&7z;|60G5_{G@q^$TJtOZ@owmN>yi@?!jQWmLHE_uf?|ak
zclyiisch2E0u1R)45<YgCdn4<a+-xxg*HJl^M>WG3AxE8H8fhVlTA`_gDN&4DzB+(
zl4P=z*v@F@o3;`$Lf+&`fx_)@l2dFEGz;$t?*VOBfna!st4Vu^*I|lQZO(#eb<)T&
z_7(qmpfR1~Zd~q|^~bv0Iscd%Y=O3<_8jWvR4!r_dI3b$o%oT;sA#5~pjs6dd$-Ss
z>S$)F^gNA3Fb)6RP?w%dtG;5?J4!@)QJgz+byO7DZd%})@{XpopL9#ix$VwT3nB|r
z7~&a_i<IEX1W$$FoB?Mzgw6-J`4jRK?YH(VhslktJ!mJA?p7cWwbcv0?T4&vXgT!n
zR~_grI-x`VZa@CHKP`zdQ(<tsqo`=lAvOrVq=99Pw2Q?>323)`K-<HgBOpR8y?Do`
z1G4lfW@9FnKIc;yKuJJ~*Ew7}p5fFS1}O4iOew@sfw2;psw#CP%)xl4+E1cMI9Tk4
z>zEK@WRe~OiF9Mx3S;Y|UiV;p?Zq{M2DC?61p)@FIiSaW#t?tXKIb+K1ZZ+*D%$@|
z4SplYD(A0goj0|F|F~}D*5L`1E#kNW>^EAtaj9ymt&QX>L<20_8zII!#~YB*MkZNH
z<eMqoxIZ}SZo);eHr(n9xY$y1WG&qguHkIJmk4S~^n_Cc!K2a6)6hXA?sz&h`ZBM?
z232wjWt@IN8!#_GLtRApa<d-?MJOkeabFNrOtU8Im#AC>I3g17k7&I5v|>?4encs>
zxkHjXEnRppIDyY*XfgD`$8e~NWLX2qhEjKLdvbNm<$e0dQv%6U;uTK9%#A*dIh*Tv
z32NYP20vQ}$?#|Yi94c@7?y<8fgg}OnR<SaMbJ@Xi~bZza&n@QK>8T;K${<0s^KmX
z^;p>i1V_}BM_NM8r>wg@f`;M0?)Epw`_PD@MA3aj1TgL=tX8{~%M33p!?`PCrxtda
z;>vRi#IcP$E9bYrr#{0Q?D4a=U}kXr(Jf5xJ`8(<#kE(D@LVweuR=rl<!u0-^N8@i
zSCpOr3_F17#%cF+l$wVPE*A>nS)qYggV59`?9Sq|-y!8qE33sYM7W)Trp625ZQ0dD
zv>^PFeNun!gBq1FO<o4_>r#Qcv)q%Qp*QiR$_446-gq56X3K|l<ahkMl(Bj#Fdm
zd=_h)4x<sSKquf}9EW2BM%)9}$J^^WQD3mLSnY`tqSkfUD&!@0e!Q)`Rgy_-<f)Wy
zJlQ_rx}mk0yEBW7>1RCrfIoe)kt*<}sWJ*8<kH;KL?xGYi;g3KH)zpBWUMD!rr3(=
zSz{Wos1@OxiB4}^Fro!0J;5xE(>m2k0n)1~)?9r*>SUfAM+OzUoT8@?$72yN#5wlu
z;Xwi7SrYSJ2FC0264R9Qzyq|L#w3Y(1tKau1|`R3gub*Y)53X~7T$>Gh$%80Yq-@=
zLa0BJ=4B^T+#s29G<1fqcRW%hM8)|wsfgM1>F^UG4M)AMdz=IZN4ouE9Q#TNCYFYW
zo~yDz6bYM<BnNwpr7<LNEaGWJ<ca!BdPKWp6Tf0l6#*)LR!g~LTq``r8y?ov*QkW^
z%bEtv0V7`fWE;gNZG{bPScGli^YYRALkE`GkqiA1R~BWWwS%0uTW|yu-Qv`w9=wzZ
zmWx_maOl$0QG#R9kxR6d&{YJUK^_8LcE=ljj02`>`C9r1E}2C+-C#;Lz>?zuo_yfR
zM@}vYYz3bW3n+5?9FcC=o$}z8-9giqYzv3Ol>>{)&_QMh#t4Q%4G2PE@&@$dQ!{4B
zi|^2ifsni2d@RoRvOp*p^SA7=Nv4Y=#V)oVW;ig<(TCxOJu0?Dr}<E;A*LuvtYu3M
zE+L^i(rlP4D%LIEM6QA_pJFRA`BuUohKz2-^X!t38%`w*6y*F|(;Z9R>K^s>@aPck
z6a=$zy!;;z-5Y}O+O?j-wUh+>oFXXQSbwqsmsA2=V13s}Y~=M&XmlFXI*JS7*q0s}
zeUqFrN)B;aJ>WSTJ7?rd`cr*L;oPaZ<Y-VFR4TdSH*X5g*dQr6Pm|QcA(*KQzI$}k
zC4a0XDbKSgQ*TPqfs;~nxFjx`C|23f<1J0;2KOma>~hg9=!j_U=rCb2L8VCp#PF%a
zVcgCwVQwpgiK|i6`!u`^2zPFAE+_%|9W>&xoX|4aZxwC5;%ru8fxeo=1Kr%!DPvns
z6L=Dlb?XA06c!B-6>MxYt`WGtJH*R$45rG)Osm@@$T2$E2$fA9Y@J9U^yI*2f$EBu
z=!2p-kFI_g3uOD?nDuwD{B84kebR!A;D9wU5+AnHl-Abv4(B#CMXEEQqwNZ|)jhvL
z>PQuB0k%tS{hbEDhQp;RtT&o)&5!@nn4{qqaN@{~E}FT>r|)~*Qi@aWE}tn_lT<!{
zzR{3~E@yhs3!3vT9Rbtg%4)@p2lp&43lCG6DzczikWX)Jxz@^ZZsf5tHe}c`9D={j
z)r?@KrjF#^_}Ew_tc;mv$6w1#_(-YZ`V<@PVo2$r6(0q~CJiov)oOVy<v0Oowk$eh
zGKK=|*>x9Vel2`Hkd`dJ@EO*}wPieifk#MF<@qYV%1CLpHhA4i=2@nwWLPz2J&*P`
zZw=Y0cNmGjBTOinkVRLhA`S^K#lmcYoI57#;g6PH1wMI<)*;IKK832m7h-o|$4Nd?
zs*!2AUy>VAsI&aYfesl)NJxgL%Oq5<zAs?`jET<$_(VZ!Xk*H6qS6DAi4&T`c0hO9
zND7Cwow{LRhHxWMtyVe^L<Z?^^d%Q~*!iw$Eaz&Pid3<$^40j}BDV($ou^)EI#lt4
zCu@B%oL(}>{Qe{Ik4YteB1Ei|7ZH6OG+Z<#G7(c%rJTG^F!2@5Ae{I(`iCLqhTt=(
ztvv6VB&0;dJg=B|$S_-pO<Z1$a02SvPy4mxBsJ#+n@O<0ksnZUTQ78HVw{n_X{h<!
z$P7kMrqC&;yikza)uGa;khwWRsHGh`u=CFi@j^+f=a0KbM&Ge;u0MrGPQF}nUx$f+
z({hfxEj2fHGv1H-XCN}STTeMAa<ed0^GMt!N!|~QC;d1t5pK8Ef_&N~VNwIE@Wv+5
zoN`H&*hiY~v91}~F1)G9*oJB$4IAVF2ZgT^$kNgZEZoRlgA187Z23i{Lc0_xA%AI@
z3}oE05H#PY?AD3C9H;u5)T9mm6Ia1=OUK*Y0|FW@d9<~tf-s|Kgh@((Z6hy2+!&@%
zB*{)-`F2o5XqfuSAzo~yh`;ec=8YE%CBsZq4|9|3vD~O`PAkUsyqkHkt&ZvK$!9+T
zqM|+{qCi}VPdmyW_)k=L%x6)f8JuY8HPQp9uB~4@wHdqlPCAd2fAArh6OAN+F521!
zO%O&-+X<gp11eE+QaQZ0IbJR;7)nAG;^u%WY9H+Ok0DH+ijaZHKc2Ww56fgW8ggRq
zv|3CFr1(jZYas<iNRdn-T;I${i`riJqS7uetpJspCP-)c#0(Aym($D~_Nd6m0=&5z
zZf2NE&9_@zs*YJ1&xddln`;0ndMtLTSaAc;`KWx@zMgS(@tw8_&0H=`(p`>_@it6H
zB>iI-m|CDC@yK0Cc6p%yO1VETg;G7@%TyF4*ZYe(bSHu;CC97>Qpc1dOQr(kcKu2d
z`VZwy77e%YviP8T<hIJ?04VA%k-KPI1@cw|SqfM|iL}6#dmC>lX~?&80mNfXL@ng=
zLRKy(WSp0BE+(b~{vy#l+29gFdmzFRDSvad12wI2<A3}6zt8EMh~}@t%0vvrNS75s
zTh|Qu%Wc=;te}LuRNZ_ie`9=lmdoMUp*O1L<l}4bPDx9zr#B&^=AlQ&P;M^xAh8FZ
z$Jr{IF_n50ZN51#9UV)2JeeEE_(>P64Rp>zj`2p*4gg^N9XYdPmMr4JTsa?fM3Kwq
zF+mUcbsjzI5nKKMk_kbyKPjE=80z3csHt)BHa9;x!*nQ_{KTe{R-RbQv1W9<%Jd^k
zh5Lpz1j@An-+O*%2`ZlZ&3AHRzv&yi2!LHxN)D4=c9Zv73*+jtxE(r0OJl+OaUL3D
zoiBRdZ^{yIBF3p77SuSP&~aLp2ZT-;1kaL9>8LWpZBTkLgXcU?v8@YR^nS)0Fnk90
zR=)T+>`|BE3I_3j2z)u8d4DuI8T5ubT%#f5-ilG0A7F5kq~n>{e;kd05Y-P18uTsE
zAkGYUClt+f6f(xkrbQ!lmTqIvCZfWwr2Z+;WcFZ&9g`Ab6_oSuWe8@Kq=m*JicetS
zNzXs{xR|j*6nC~6FhwQ5`RHii1B~GOppgsW9y((W+Q#A1Xu(xJ!s7loNwgCdhR&eX
zWt5kVZ>&)UI6Merp_vFBk!mrN<S$$fBBW83Z~*1Te80cyUj8wbv2jjC2NX>PtcO@L
zMBB~N(1TxX`y6d@8(U?At7xr{L6F0|;Z~!7aM)RqWuyuG;9nLh#p9AQvJ{vgxVZ=p
zN2P(Du>7jG-)Q*M_{wd%16kz89XE-{ak$?VO-mVtk)$bfbYlrh8)(N*f^IsQvj7=^
zyH&)?VkuMroH68f+RCNb!ke=`vW^TKIkdP9msSToyJ}{~gKZJz;#$cyirJUGOP#Ac
zxwJGE+BQ_`E78JERoS)bO<557(8sx2rY|NCE+>lW`km5_M~GS<@$ov$;X-NcI}&S%
z^4|PO8zI!pPyX-b&E=#1x_d)(ItkQitdyHnB`}Ag3ph-5WQFHomGCq=Jf<A8JjbDB
z+*P%;Hvee($>K^@nXTeB5>#Krl06)uy|cN@|I8|#cI$SvTyAPJnO-k7%2x3d&FKjq
zH9Z^jXHnT*@ib@6MR#Wv1;3##AtUK{R0sM20dcmr<d7-MZ)f&&s|jwfIX>X_hAlU&
z+=;^YB@n9Uz!g>91tl!Y%?j)eY5cagl7zs;*b8Sce;sf(vvG!_>l8!KG`q7fzfiAL
zmgmc@m1?=OywF~(*Xr$BrBZKKmO4wdl~!}Pwp3|U>&*uKYqgfzt%b!#rM$e<s4ugL
zN~OJ6>ohy9mHEy}b7`T`MoenCSw>s)mFmiTwZ7C^Tw21fPJO9bt>EwSVtZ-6w%k~5
z&Q})MMty#9d2zA5SY4`h7SV2Nu~ToBYn3JR++3{9Hy7&j<<9(4wX<AlH(T@fgw;#G
zo(_7)yGO%+`-`i>!9CucU{Wnord5!-c!2GOzYy+Pv(jicJMc?!OT$t3Krk%yW(;p}
z{r!>p_-3-%PH9k(5%tBj5_q)iEu?~A%KFlSh?d<kqv<&bAz5)h5E_6g+&JrFi4HfA
z0aJ04kYF`9ek)xu0~DaCNHv)EI5UGA`EE5@S<EO<7g-tD$|?hJUKN*WW)<9Bnf2S<
zcGklsoY~HxirWyH0~fH$THP*A(>Ln4SfpC%WzBLQuR64Qovc^um$PQSgC|$e0>;F)
zwVh56w`o=Tt*p}xRq9b!t~5GqX07@TVnvmDJ=?C-wzF32if_5P`AxF>Pw|NBIKrd0
zuB$7fRJA6@lG_4FS<apBb!`h<jztjtQ^lqqXo76+<o!Dk-y4eoj!o{VEv8>2Ek@6)
zBPU+gq)8S1PguR~7b>`9`04KbRSUvhf{awJs1Fm)(YaRRcX2f-bpAyW96L`!`9-}*
z1KM8ZeFLw5`D*Uq)7jvNciGsZH=xUTnjx?2K0oQhP%JGt$%i=0F?(=GmX=0>vyoEo
z{@@H!8m=@1%E(oqhR%BP9=B3brytl;BIF|$Kob6&?+Z!ZBI|k|9#I5`Xyd`NR8DrR
zgN9sFfDYn}cc8h|UX#g}qAtz<H6bvF8DEj2Q=a_-ll$79Bg0kagx%2Sh#wx{Hb+lD
zb6u4d5etHKR?hM7ZfAaSrpz5NuDe*hu&2OQ9K8b|;dGZK&gFO$aZxQPe3FbPDx>!*
z#=G1#MRa(quPKspQb(MipyF{V_Hp-Y_+hY!y{6mZ@%-Y#Pc#?U9GJV%Q)fQ34!rk=
zj#16syx?uzi|*;j-^bun?;m_V*~5}3Z&e*-O}Cknb2GVVh+Fpf<k}K?&7kWeb7;Ib
z`EAzz=xhr?21X4kJb31QOW$}5`2E3wrp(-ONsvxC&NccaUP>p9q(H#jdGNDDcNu+A
zA{h{P)q@Fsw>)|8Mh;I1gJ10J3BR)!zmp?b#Y@{HyE+DudY+s02^Wb{*+!63T2;!U
zx`?u<1|pk3^adJmt`kQJ8vhsEK`|R{N<n>ZN<b$Kp{8s|bmgoJXDC8e`jJ*sfT728
zIowvoPbhrgMbs8LSA@7P0TtNv@+)0Q5u@VN)K5%wlb4cwT$xbP+=Z^WlyJAp8h4<(
z(uYHZNtw~WhD{ahNXZ<Sr5j0&tMHL@j-EUNOG0TENh#0<#f{>VYYr0D{^k6J8Unri
z#p8|Xc|J0n{y&0GZw+(yl~aKzlr3coio`EBkC~g;pDd^=!}h|7Q3P9t54gCxqwg0j
zha|`Ql6ky62va8sAK<NM^M_oN0|kj1pz#avU>DtxNnIS*w~V^H`(K`ycK(-|(6VRk
zu{&JZxEV!PNB*#2d?75$sge`Lh6dH|!zFO>4nl`421DIeMi=$L$p?U^GNaKOw&)~^
zzs@fjq6!{L1<4A*Xim`Cf)={Cow$LklxM@CPh-08m@IVsMSM}!2v?CBiiek&i1pnV
ztb@68XJQPWIP9ay<HC~5qsu@~6fY|B2%U==N=w0f0#Z{Aw1e@D<jDHAFC{?re9N~I
z*xWaKErHE_!}k){+&6qNfz5rxHxt<0H+(gL&3(gn6WH80d^v&5eZ#jC*xWaKJ%P=A
z!}k-|+&6qdfz4g<4FwiOglTnYYh!bLYh(5Ga@Ka&F+i0t?{NRPx3hs8D|tD?n4gRS
zFk;>J2WO0rubq8*V;33WCT6|b=&d>nY>PKNu#DXJAeS((FCHomWlp<T(6ec#yF5oW
z?~0=%#)f_<l_Y$2s7pV6R(MYb(t>F7-iJ@_&bE>?A&c0kJtNnk&AH`5x~nrZHn8)z
za%+wk^~^5vy<=uP8cN^%$BZz&SdE(?x`db<hHTr0Sj@Q(=JVPZB}+cqh!LEP_J%vU
zJdEZfPi&2geMmW24`$?nx<9~)bwmt5bmiuWB9F<1cu6F=z`#$dfGz3E3=WXYnUnb-
zN;g^l&!QQX^WtrdUDm18!bxps>;z`Cphnxd;D$3mlCULjsTW8};-svG3lR+l!(Wtd
z(7P<DA7$tJu&X&ROOc}H*Ks~$9vo?DJ-J~X*l7!M11%rj=Qg25I0|UA;&A_R#a#!X
zD0+|ZZwORivFl-I`v(-I##w<AU4w>XKTvlV%r0CcQ*sS02hLYQ&xw>w2R*}F2z~%2
zCUHcr+}bRbyp#>uhZ|T_+L#YgeI6&<92g_?p-cBVmJFM>;Cnp!cueFmqLd2*o2whV
zN%L3_j@`CX;=uh+s1%_P(P)pDJg&`mjFcOgHM(X+SdHRp6ZUY1DV?e@*q)2l3n09l
zL*_-pBUC-=$-(nU#}b5{;s|sc91YH|^rNho6i6Y$fg9C=d8gT*q;PWN{>TVyjuaq_
z107BPf|8Pz2L_cmaZbArQ?QwHThY^4qdkv!)xbQ&D+<8pj;o)ahl7XU0ogiLP+VEZ
z#5HCluASHjz#ak1ChcyD<e1Q*{XFFd4ODBhA<zsCw%|#?XCW{71#Q>7^qt~Uc9wcl
zN`cb-!4cjd?uEw3h!x4KkMBrbWZ>9_vg9V>OC@GYpveelpbHa)E?@?*b;*YBx8bIc
z$uI(zG3KIZrU0Vc$IdQ)JO~Qb-Cq}2P=2{5a1`Gm*bZwVqb3$YjY$s(UG#zw@}l#@
zP$_Qb3KWR{EgOru12BF>!3s)d(JMlPIsc3h4T+8`|BleqRPG@mnahv8BorD5PX(n_
zRkZ?q1iJ09A#F=v6PlX(%IAb81QpcX5PtBwbP+-Q-Q!aR8ihQbG@j-BZK{f9dr}If
zNa?A`PC%GMR&vVRVZ4+wYQ$^cMh}5mXty^aM6k>!fl837V!6pj#Q|5p+~JgI9Aw2{
z=*<Y^jIU~Y)H@ywGqLv9WYFv!%%avZ_sIVGf;4`ybLwl#Y6fz1_<&hb1mRT^SU1iF
zRQCj_O&r`Q*?(qY|Ch0810Bb^oK=oub!ylZHdq2@<P&JZSPZ`0m=dqTHFZf#xfUj3
z#d-{Wf#aN*yjSNk!%M`7M%5g7jY07YD$beEIyk=asB+)3DJ9K|Mq|F!H$n$_$?f$~
zjFi&PEP9<wy7r*Z$#O=(=>@_ZR0Fc1su&&RdeWeKh{=)jADzs(KM>NHh2c^6^z*GT
zsRZ{pOmOAN{d8)Cw*py8;sXK<k8JuPSjJp<wYj{t_~iNH&6!&~8nA-8OW1URS5(jp
z=72^71b&ZCP6lqllnprsc01SDw%ds(zpS3g`xNl!qn2UiwO|fnH8_0k)VN^mUpZh|
z4JH?s<~J5sSJ8Mf)CfX@zIfEe$TRnDNoyS0-r$qYQhik$hgV?0*@ZPc2N8i+LJ^*U
za(kUh^my=mFYZ<+=TZwQ3n(~#dXdtcWs^y>F^=Ov+h~_CimiMK7Q!wF&ykpQo#MVr
z&g2vX|NN4Ex;rPl!gmOBU0wnppPuUtu!f9fSe(hz7HQ42Pk{;dNMhB{b)x|kE$5kE
z$K?_mIxBQvIgGeeC9V6w3wSP=;BQj)gXcLiS1hEt5&B&xPB&_~O9ssKm$-McmxYKo
zxa=^XscS!r_fuwNVS`lxjQEd0fiYH|Jl<5VSyy+tl9tpoEw7U0Ha0j)M*2ZVni3k>
zk-&*M)nW*I=`uTea=3I&+TAu`@X>X_<N`NP(B5ydu&Q>>)n?b;;fJuvlq8<TJ5as1
zf^(UITL;eNt-FF#x{>n2rd?lNM8lBA$Px$Yrh@QGXF5*5RnB-l=UVFF-j$_!5m8PP
z<tYZ)8||)q^p2wBWMzrV`VkvCf$h>FF3IIqi*yqqwU?E`l)%bN*p7&6@%z3^ffI$c
z0FcomYT4*%m`)6mCo+8s#*EW9&)e;CXwm<Q_#Z>C`3`<s39r#D!G`HaX~0-U^1zb;
zWrf0-S_FG3ac6_W6WMEJqUTA0xz!lWteG6`l%R0ZHTntg)4^Lczj2FCvd5PUyY)v@
zw1LNn5%>sb*g)fEkW)4U*Ms+X&`>fe(I5f6cK4U}XvkVQt!Py^IMc6z$u97y(6>XJ
zjXPAs%ZjJN517JndD>^QcQ`_)n94rc*+DcQ+B-m;MD>GHCmE1P)Ei~|7kByL!5C)<
z4M8j=MSN%S>3d3(rHLqMY2owPAUXk$QAhDTg&+nlKBPfooEw!)n?m!P=Sc~LJfB<I
z(C)K*hKU0D_u_%yZVIbV2{kvC#M#_X0}{xOBAWkvVO>4Z3rnocKizt=va+$PhRMe)
zq$l4{Q7>evjnGNVNvP~47QchB^L3(bCCvr{BHT|`O9T)^d_|)Dpvj`P)Z<I2)JHJM
znomTN1S&nG=uCQCNW$E4LINT01TPu}X7X{JFlLdpq=|`xyuv6&D{zP#Si;ha)h2fv
z=cE=_a8@w(k*&NaQYS+S_BQXpxfilSEVygZK*Y_t^Xb8xW5K9g%=J++r$^y4)}V29
zf953V-8UIWi=8{=P~_!{rUFw*M(ZqY&G?KDKxu5m=B~l%K?81Mr-vt*;l-in;AzO@
zLKjSRa1PYOG0C|c>`BF)Gh<%S1(+Ek<xoWI#$u)@XAsBX2#JXc0&rQXwy|gtHHB=1
zD^z>9(2P5Q1;7aLD&a92tr6eGSkxJSOpN!c!$Hs2(b)s#rd3H8c$^M~K);Hi318WY
zY;n#F6;R9mSV}T+ju$o^x)Sd_CYoCr;y$iCbzEz?hF~&ftxi0Dx5GMsE<MvV++eY>
zK)V~MiAW$)9wfiEjCP*ObW*4oD}vx=0C0+eN=Qh~zaetz(sdN90f%zj{T;4vFET1(
zo`{n}&0T`T<#Pzl@N|UB65(K^Z3NXzt%QPVbKTRklnQdGcTv4Mpn1!86HG+90hc--
z`c{-&6oX^qAe|BbAHi!TAyqT_%s>~Gj5O$qa|WP&6OSwa!_p2#^uWY*K~dX^FFoVg
zZI=P`h;{Tm=TQ)Ez++tmadB|fKXIt)MKUIVX<Z5ZfPvgfHR%izM>EgFvxp~fk@62t
z0|@4aOU%bJPz)w+JRq7~fS&Q;6;EsRiqK9xHjkf_GL~#pNZUaOv_ftcyNC<vb0!2)
zVCE*8@E8awt0R|voh+5aY-D;&^w_H&{JXt<{D~#q42wU<CRt2`2i+qCeR)u&s#W6N
zBWUI1nt@F9!O~9R-3(Mwo`Y8Ag15P*@*%s8$sMa1U|a_!?0#rdVc?FG+Gg0VFV&5g
zEyf7V67OaOk+oQXj8Vc=PASJ-i4>cz<A9jT|3#y4B#i0mlH4v(0bi4%LSth~39I7^
z<s(#cskF9%*S@IPHYDKUkqy3CSrVOQQZ_cophOgT4omK^pDn%%hAaqG_+|;ZA|w?m
z?oG@p`HGL&m9RRMTW*RJyG@A=N}ye70)~!f#beNe29Xl<^Z+oBwrF!&0afC5)fNQD
zQm1>Oa=p}!&oO;UYD$c`PLGezxHw?n<fYJBpw<WzctH&ZJBvLMzR=X2e!E_&wyM3I
zN_(eK-@%65dz5h(9aFYb(*XZBw4QU^!Yqzf&XdVop!nhsHt(;JHm4fg=?+9w9tD|!
z7YTMe8jjPkN_fW5QIv!UCYU8D(QX{Bw}3Z!^L>owf#ROtYGDINBnTNuB1VPJ_W=;}
z$`=?@kQ@w_EtHiKd1Z#gjn7ACdoVyfzI-nHnuyTJF-(&rTWkJJKD-ZQ8aP&BR&Gp9
zb7dByjn|J}^2%Up!t{|TjK!WtQdZ}C@iIX6nIl+EdDJH>kN%D*5406gEl`Yun;^Pm
z3aWw-iWFtQmJ-1v`t>OpT!9PTS2QBg?HI-4_V_z9`sj=ssOjTCeJ_`e>2l{hBDc|w
zU6T=g=SDIeyfr4Ni7}=AmunfwXvIggOQZKE*qFi{tL(x@yB$H;=7gHex)R(1mz}V6
zC~->*2D<bud#UWD@Ek*sSU5tyYOk$po0bH~1FH3~d9HpuwkrW0kR45oU8C%L;_Lx8
zB%BTo2S<1TiRDz@^xw%H+u1{c8H^5iY<yB8f;MJLRpZ68YS?lY6;MCV&EgCHB!l70
ze3T1L^C8hQ3oGTaoihYPUN?IaTB(b1;AlPUB3Ud-%i;E;M8ft)BmMLs{I9ohIlc*-
zy}4a&z~$pV75m4R^3Tr#rudYJ@9t?A%1uD<j&089M9~5pbQqLcyzxOfb@4wj0#AI}
zME?;nSh6tyW%M=%!tD4ikO7;zTxgh$rTWxNZq7$bT6c5P*v7Ehm=`@>DX~Gh$E^jH
z$ZB|INxbDS3UHc@!s6+XX9AyN^#wwI(0QR;Z1<zG&WkB>Uy|wtTqLL{#$e7+rO3#s
zB#vF|pI?M@W4oM7Y4SF3Q%5$&w$ANp=;kTG75g#!<u#JnZ$8b^h`5E0mEFQ4ZiQ-1
zoCydk!T6BWcm6Uc)-ub)>%we`Y2i9{kUI$ACoIfMl#jr=KftjL52`ynEpU4MA^~dm
zq;BHd@<aGVqLfKiU?Z;(u+(MS2r;8m*2?(>A)w)JmUAiqc#tODr}gD5QJkgdX9qbR
zm?~}WXh6o?(I`T5hC}CA|K~(A3cC~COy4~d-x5FLOUArAE9jbHL7gd()}b#1Q|yWy
zwnvVqlj3&`gp$=p!%AA>SZObl(L+F1*uXtFg9m_M6oE~bs>XQO5<Hj7)FW&H3{2p6
z3j2A24%<cNgal$q0uiAZ$8wF3QZyx_Uud#Qe*L(xNuSFm{l|nRb8;T0K!yNkfwS67
zIeukM#u(GnaEzzkWmU%=XEq}M2Y7JuLXPeWo*Zkqoh8=UBy0zp4p~J{67BcFMj0Bp
zj7vYp2l`H@m|k346Lv>X6S>KL*psT_60PWsp(QNv+4R2B)G-+BhNvo{kifjf+puc~
zOQc}z;?hQzcy1Z?)F@mg5r8~0t_ZTpEQj-A*{dN)fzQO=bGH+Sx^!w;7}>Odv6lH-
z0%U&h&Rs*D2+9-~^)16|$K-~|vr4*;-jyKD6*sX=h2T`qTH7k`P8u@M77{)oYA?Zw
zt7W0D<Z%KHfpfU8Jy~x2A(VB;*@QW<u?bqsx`frmo-T=Ufnih|>ACWVg`Ecy-PH#E
z53E><uq4LRGruF*RPv;+GYSIO_;fHffsO+Tud>1bC_{^Si3u5pLlOo+^2F7nb3!hI
zcYCPxHg8lZSosPe!vt8bOfFx@ilzbR*Bw4E+((S&%K2jmDC|!Ic#p%Q)nyi+2C%B>
zj033?{RF8I-!T*&doWlNmPY^fV$O_A<lLNyogmNN$?<i=Nr3d6YW%W*HZ=aSfQqy<
z3}y)$j44GA5k%$VH3{W&3BGx-6eAK6Hu^?+ri|GU-HVykK4!AGHt<%I6T%oQmMl<<
zOHx!RS0|z>ce0$E9LSV8w*(R9XVTB);~mHzJK=#e)Gs*XfedRYKE;u1L*x3ckz6^p
zYX?41B2fDM=_$}fEw2)$YTJY?rlTo|NTVo*BSb}a6$y!)4w2vS`7KG%t#!^zNp8!L
zY{>c{?l*FNwd%IeRjhxwh~guu)HaMw7#pyy%hiqa=q)20Y=+Pb3(+FGS2d2g92;M#
zVWRMesg^iN)Jq^v&?mNg)N`I>P0%Kim)9i(tMHVR3^!GJlT}4tQ3U3hq$Y}$gctdo
zf*4m1a=^JD9B<<9Cu2dxCy0Jv7_fo2j}sI{QrKgCqO>QnZt{sm@X<-PhfN?ywqQLj
z=M$vd+DK$KuI(h8)sr$z@X{T~b5+?!b!7<u<EsSQs3L8AGog;$O8*49Q%3?O|4Hwh
z4O-x9FPPn|S8*FG0(+O;EnC0(-Lh;A4%exuRwxtnLEqKy3#D@xC99KBS{+r(mBugA
z=hNAT!71-6oR*FJ8Iz~sm`?}ASDHUKIPS^5h7IgY=^_)=tcC0x{u3l^8du=)V76N*
z<%GG5BQcrXj1;v;^`THM@P1yjR&}?)DRi04PSYqwmaJ0IbLD`uX{~|dlrCyzb~4_D
zmGR<W@n16^1PIgOtdtLAY5$_+KrjlZrf4+d4cDDG$Hc!9az$V$ag=d=MVMX-(`pl=
z9b82n<2B%68SoLQF*9;PX%irsDOpo)x+D9>BFZv*y0{W~Aj1Fp(x1K42#XSfla=FB
z;ga)d;{kZl87}wBZGFMbm7I;b<xxhEGC=_lhq)j#xH$#W47aC$X7}Lpr&~w?xHeA>
z`RHH<Y*<i$%%?X2d;t#Kod6=jj`yIE<KfTu`w$WaKT+HdVH|z{iB27ZiJBILAl>mF
z>8+$gk^%X>lJeyOgVSMv$+&zodeA@`bcP`!)n-|t#q}#yK<g)t@fNw#+5oe*-bg0+
zYVpam!XKfjaXoh7bjqnV9z>hV*49?K?>~_lXHQOhmnpBxManBfZRnG1o!4rQ@X{t!
z*9TshZ8|KYW3~ML^jNhR;*pedr^S4_QblKcC!YzK$WNAK=N5Q?%;LQbyn`tBwfSp9
zzqmU!zwr85YN#(F;cV)@yUp>*ds(2RKxUan5AcJ>16{PzR)CQzLP=`u5C+c9S;_en
z64rBy3aJ7#SZWG=E#ly=f{huHU$F5%*pO>Pb&G6gKvj_$oP)s`O}@m1lyHy>U9g12
zY9mcTfJlA(G2BYeIeo(X3BeKMQ02KDJNSCT!u$_j!@YO|jf~!B=&>7yD`df3YGj$;
zw&cEjW9KDY`tae?m+ZWR&C>d#=YPOeW)f?gZ2@)QJIk$iXsgG~{%6OsR*FlYv9bEg
zG?BqU(^D7qB-@#Uuy5I(A?4|YM1G`*rE7t}9!Z($a}0G#m;*>}8$D$9IE^h>?m2J6
z6K+Ap#wd9^4bTw%E;N1y2X2J%9HNBVm+jC3vvOG#zm?mnOlo`D;!`3_k->}iXJoQr
zs*14W7n!U=CArHnoXC*9$e0<f%GR;K+zZb|+=hz{qE)M;eR3zt^N+kStvki^TefmU
zc<Bekh^CyH^7~q(zLx;MEW=%p+Lm3?<Uakne_E7K*bXUIQY6BbdB8v_-L5~eQnGj?
z35|s0O!^|dpVJijXXiq?>UI`EIr&d`12KOj!KI9L=OM)v;p{L%if)~VGoNleg*-et
z83pAc8y4gR4mA9=<Us|RJsk=@$OHUeS(37BihzZo5OBYjg?a${Slke$Z$Q8bIKzD4
zlYMRGc=;7E%S2Ygm~{1Aw5sV&sEBjbL$1aYbj3MgI6L+!y^Iejd`OZ`kalo98c=_@
zf>4SXHH3Dnx?MD2!A)o0NWdO@MS?MjDzO=KVh5c1hI43_HIQ&N4iGjn0f}=PFUv-D
zATlPh;6wDe_B=;~dk#3Pz($E<=}OD!wGnDb{Y70FGn}oD3R<EJX9$%c-ACF=qAl5M
zlHiZ+hi(JewX`vIu4trc2(vS6=-b?4stZ;8;TF)WRPf{mXeTjaqv+-_7S4I$8pkPj
zOsV#QI0O8ga{x?}uFec&<|t+e{LZq8wQ*_Ii|(ft4s;$QDp=+i2t<#`pqV<qw`h}I
znYc-%8#iw7l<?#EwPkg#;Z(qf0yu7GO<EQwfi^Z*H=l1VFU)UP4Zz|3E764F#&SFc
zUIM$_O|H+5Y`~1ItwA2L=>{fexaO7`x|8u`hE};Is%UzOU(G7cIpQ0Sdt^<#ic!ZL
zizRA}y8P`S5AzH8U8%J2qywxezUz2`fqB^S!k-5$*2rqDs{HJ<lAkEg0(jJ+=6(X6
zYPBP&74+tRBfW{ICdwTFx5iyH0Gl1vaoxEL0WF}X28z_c5ds1%AReR8E-<GrH?q2b
zn$_wxKrE%IXcs@LW!NLUW>Eo%>{Xh^>oEpFy;k->RyvjRw;Nr(5k^{X5od~kN~i9B
z6K4$oRjoIGV?5PbZ_8gD3ZOz-y<N{5?V60GQB!>O;Id9B%}ACnj26VQY7Vk6(gyB_
z+A%uIC6J)vZ7gK4<z}af2EYMRwK~SyQ94&zfC;~etV#=GMGg5|1>*P(G!sVo-BfDU
z@R$E%omvZUgJN1AJ=t#=3mFYPgNJHmj2C~|R;>-*!f!k>lQmc$?~L$&f{QkI$+cZa
zUK2PMLV{WR?;7w0*y^BHlXc0fu6_+T=kFS5%Mn*Qtf&2w*8I&P_}QunwCojw^?+l{
zu73{S{e&dc8dcN=;UFaV1HNEQ{sc$z4@QU@M5b%f;}xj@iNipj_7e<;#A*e;Cn!|y
zkewZVnv_m}#8+0pyFg_HZypJH8ttqC)Co$EN71VxzlIT`CH#@TA>;U2X?HT#b)7PY
z<TL=3wS-NCwX!^KWy)L<pur?v;%uC9PKOv<Zf77L>vTr6bmPhP!SLPtLAHTsC+vAa
zZp`C-P@ly#ToR$1zrVJ%dWeXYhUKm$uQp-Ig9KXX{2Nd+i?{FqRJq_4sGs=^)NEEX
z!@U;FQ3=CC@OGcqXUJxWYv<R@LwD)d^frW0@EU>{*KCsPo_Y%4L&n6lr@x>s24>9H
z^2N4R`(sInM{dccpKGO~KERNZWH6`KeCPnp++SN=yTA3rP*8Q$4=KIl13VTvmMkfU
z-O+v)6+Ya4zca(7L0|pzSjzrbN)NUqu5+0C{+#>X&wZcajC=%yK&GpII0qF*5~Wur
zq*o`T*CwRbC!{yx^d4M|2#g&b%#0HR!SlG=EGl%2knQOZr{JQrBc42szKQ$|Iffah
z?i{=y?dgp|BS{|~p)K4COA6vpC{BJ1Gy`ne+dqDv%bH>j!^2&v3t!rP;#AR*{T}u|
z+0XunjI9z(UJb$<r>+Y72-jYl%JEtxGXkT`PRI_qg2HS0!jj18j8=$v_2V8kb^|oV
z-te#QG!(&eD4w$q`sk11$7NIfhr95vl}>WwD;!C$r`W~zztPzUXVBimRXmKE7hp1g
zL4X`Y0IAOx35c~PM-Ps1<LJf!vpgxwVpdjX=uG({Nm0GkqxIoQuA0_kC!wONsrRq2
zC61NHVWrjRr*t4O9ptz&fcwif@pCZvFgU2PNU4aakS^83umo9#c}l6f1<K8v`fL=9
zY3du7SrG<s9}-7q2%g~RpHea3TJKM=p}&iG5qKC3uL?@|Aaqp8Dy~T-xoi2$`4k$t
zaA??JCT=qV5ntRaMS~avygc0RpWq<fh=)Hc@ybw3G^X-(ZF&+?Ty?kzGEpN7H^Tx^
zc=<<#Kgo3Bj4S>=92I1%gaa2i`8ntp6xiyWaeq7B4kT@&85>!ECJIXxyd%ptB}r+d
z>jlE{g##r-W{Ku-(3cpfrQ_K<JeMWh#Cvv$M#?4wpI}Cf4PJ8sdPW6Asnzd3zxAiH
zX|YCRSwhE-B2bPf2;8D6m-XmwDCv=9g$HeV4b2KAEX6~f^)OH<4F%E(E4X2y50wzs
z)SUnxKMsSgd5)f?d5tXs8chA7-w<p070WEs{CA2ShXMw+x3Ht)@c4)rh{#piRQKe(
zB*MB$ylj$zY{2w6kRrE{$nfIIFRij{2rRuEtN3z4#RpdL!GNm-r3Yg*A55sZW;F#~
z4Y8Ki#;UJPsJ^gh^%rn)`_lo=n&VBZBWzqLAuB&_Boz;Q$y!l8RazRWx-_ZghOdfC
zzSMq~mNv%gZ%k<5iK`EOD0yY~L^s<*J-s9ML5rF8!<RD~t_-8UQpOdcSu*<&nM6qq
zT;+eM5{{YRi2~~EXPol@m;c#lY2aYr7HM;ZbS25nV_Xu8alYn}zJ^x~hVWzfhL2)!
zR6=gPEhH7U<bhgcEa>EzXJJdLWA#@jRNwIRH};1oG8l$UN=VOxfTRFIDZs1bayk;{
z2S|`8H>aK)!J-1Hlky72k#%cDE|eT)Q3WL%LRZmFjsi3)wRoaI+k$cSI8K^_2J<Um
z49hzoOqj_jYcsB*xxcR8QW0noB*plNG3bHYJrhpmKkj8+Wo0#73Zv+?(qpd*fH}RH
z)3u_j7<o%qN~j-UF3oVgqBgq`PbxOnTX1Qqlbv%sRiLqPw4YN3u6kh@!3&Ft$?<t@
z;Dz6dx@%RZck~eiDN19^II%r$wC^ZRCuT4jNm7>7V;$2J2B)^DIbKH)tIoSr-J_>s
zRo7nvY3%sHI>JeCDe4#Ux`!#Vjv{)_1Vr4yaI!#@K%X0RUj1iZ)fk(P2I+?zv$+>T
zng5^rPY0Db4bVU%VZf>AtffVpW6y?j!V`wCx8(4CWXOFENvNv9J2{*+Qe2D`kO7DL
z!>~8F&$~m-7I3-%z!smZFK=xhz$4R6s0n1O${eod;@Yc6z9u<Astre5y~EG@TW~n7
zno|KWs-z*itg*Mp#<gvB|K!02s}GO%(L5eMmad(<hk^=>$Gh-WG|#aN=NLwOOk9cF
z)YunsW8xOv9x$6KNtpp+{avChR!$Y6MB-%z;Ph!!UCtO1U|f<9n&SQ64}(o2K4h#x
z%A|=-u5r|%y_Vtz1{zYaA!kc1l8#MivT{{O_~MRbI4qb(CPY&u6+O}5NmDL8YD-hl
znET<hrJrNV012$h-5Ujldk0)wM}uAe@z$YfDp9V{2*;!_%5!o*HvHfQ5S?Gnxm)XP
z;iw~>5GJLJP}rQ5I>Cidq5(!i%m|}ni(IO@JIZRNLCI!DB((=qa%_%7BR#$(7Rb#~
zL|N<H>{2_BSR4_X7%D8)jou#)q`^Lz2Bha)LCVDz#F-E;?|Y0rIH~pXuDo$6wk}Z4
zR3(qGoPgLFo)58U8;&$Z9%y1VR9PHtog#F>UfmG95@Q>dC@~b-1*_ArRCPtY;c>kU
zEc{~XkByF{1!}OU?D?0sn3addL?|E@%3_yB9>DY9FRf&>7OWy8F_$uCEvJSL1q?%v
zG0Tt*kCs4`tsdzF+oi#$LWl*?M#Utbf5-oO1siZi6uChdAX997ge@`}?>jr*a-gv_
zU&!7=@Oljp0uchZXogQ3l+k1wk5T-jl<O0lJIGM}D^&k@Iy@V=U?Zokp<{(F`lhJN
z5G%Ki;$nO!F_044(=EWp<cz{Fg@hI8%^k`Dbi6-20?xya^65}v7Uf(MxW@CPX8~y)
zFA+z`iGRCQe2H0U(ZK%t4Vx8p?NnDtu_?S&hGT#rKoQ(ANVd<yx1)AU8u83{p_3>@
z1zFUKzMZJD3U$cwevkH&e1>X9h%hM)&I2lr^%!cV{iTRXzT%JQw`(cyeirL8$C_W`
zfKIIjOBm0Tya#$=kk@2^E=&#y9tBQ0?$TGosznf#Sn*3`H6b#c5Ndc&-B0>FC#M<#
zn>n2a_XF6SJ$V9O-bvI;Y%#Lo?h)*)0Om|l%p&}qO)=cc|005=ABKf7FCjv^Q-cK)
zMnf+*a>sK!IVEhF@to0iL>O3bJoTr+k<5kzjT87ivq#~7bF#5j!(rM?t_Pz4el-SF
zT7Ve*I$h&nW`RFzG;+XwyHisIEl0V@kRpFcXAv5p@a%xT;;K_`;+%ZtlI&8$2FwYC
zWIlIUA=&VJS)m$ztHMI`^Tgdi0hqD<E%G8af5tGq&3$`nlQ(1j@b}Akfr*=qn{*uE
zJV$9KX9Hqw5!F;pHOB9UIA7k9-AHY{62bY}Os~u7^Qeuu>A<7{1S~S9CNfRS$}_ik
z4K-p#={qDjpc9>rMshxr@<}{J_ddV$SQyFC>7UIFv|P;MVG^KuUZzB!qySD>iDE@)
z7#wyq78p}*slK8jA5)<z(Z(EAx@jqFG@M>O*+2is{|exUvoBJ#Q8}<?^py@Er*NZk
ziGBhsxo=(f5-5w5MWTFwOxY$7l$+Kw_Dh=%k|fSlOybahtD4mG6;tfSZiA6^Op}5`
zkHtRd+ln!lMOZG4#iL!IdORIe&Q08O%!x8IaB{JeBKE*}g+zT*rX0itf^i{{1rSm?
z%ukZv$SPnwsfB-BuSPqJCqj^VBtarTA1mmoGc}c;4WZRZ6Cwf@Sq~9qYjKPv6Ri`f
zd3Hd+LiR4i93e~I^rfQz`3~I3!W1y`-cX2iMc`QnTko-SHhSmViP7LOlJaf@dz2CV
zER6F-D2S*~@=-$#(fCg%h+{#-un>x=b-Zqi*g`fXi@^a0TYW6<c?G!(Yi4n=#f^Ey
zn@_fSBSaD0T+wwIuO&{61tcQaITg*tBZQJZ6hYU`<fi-K7_SEWR%JwBOD6n6j6!RJ
zTY1Fh#a0I!(j?JYACd{o??6uXXRuow%f=I19HkgAH@9?gO^PSVL_;Y>O9Mg(7GXP&
zF$bK%{5AQ;*03na^Q;;#b>5<pLtgstd)Oz&p<`!`PW@3p1N~8gU?iT)WMhtkC_atM
ziDUc*?IbQ99fHJFQl6)eY+Ky@(h1geG#5%lb^^$HJzJbY7(tFJk!6VaPjFJX9gSI>
zzVgSHq#t@&^3Ex<E=0ff8DZS}UDB!n%#dSIA&kWKXh``WjwF^`4!|&Vv`2@<qEFLI
zs&<S)$H}CC*m8_$;i*!zImZHx;(+2z0z9vytrOnMw<Q62!5vSpSr_9nV8ovo4vPXM
zsaZ*4C^GPXbBY+X^cJHQiY$i2)s@4AW4d<^Zt`fx3C1lvL%er<IvU_snmvDVNGixd
zBB$K6EwWe|mDxHzQPu!2vU8sO^rIHFW6?R1A~I%?2*&nEN|{xN%4qFW;G9S17+C`f
zF50SnSq=dc(mR_6!d5&uwpYq)X_DJPVC2hrA|4DgC6TR)VAjaL6Irr^9=On+r>t&b
zhHT`fp`ze`a$!)b(UdR~T@`ebx{`u}l!uul9Ag7p9R)U<f2zwWi(JRg#2b|+Ffp{g
z@$JVh2=ye0O8hBFN&1+`OF{lUkJ0xRvljy?K2rpeN2?5|a9$CYHofB0Sl@sA$?-)E
zq+w7J<c*U?F5JD1`{JxT^vs*!VYx{lF{C2v9u;6QKNEILrUVRVOB$0s!g0a3#ugr_
z(o0-qf{>3@jOsXpt)L`Qrb&^+#F{|ET{iZF0#S|7&jiMF-QrKI0k|^na}w_Gx?+o3
zf`&UPm}d<0{30mrXOW;pF+PA(uz5G|Fp=h`n9+F0Fl7DZK*5+S$JO>uu~;6jF=R2e
zXfBfvMO^@d_#=YO2$e<M22=*{+=4@_aPq3rMuMX57*%LU5v8<@LCkxogi+hcW6Fps
z*-562=FgaZvpo)`AhXUb4SF{Y{eGowSGz7g(S@e@YPMOlrjpU-KVw8x#0Q6Cf{*Pu
z;)=E=IL7GxPa#`68p@XG(aG`I)?SxuTR6a=E_XV~kARzrjixeDtR@bsTV8B*<i-+a
zpk<mBRdG^hY{Vv`-{EKYRXAnz*%3?ssR?7WeO6d-gVzo%<5sf8BiUUm=j~%2g_9Bv
z;?sA;MS?gg>5hy?z`FfTeeN=*(q#N~Bxe@5){QtHC!lVASz@MJjh9u(H^3$*CQ<s>
z+=QLS!;i|s(qRUID|<2XD2Zo<zj097=VnK+u5O*P1V0)T-jo<czz@z_N;txeKLAJP
zHql&0=G)jEkHrk#OWi%d75eEYbHn5cExo8r23f-4n%yz1M|lPD`zUv81{fN3)8i;1
zhu>0v1Oj7yVYpk+$vM-PLKQ{*m-C8aI}O9e!R84K0d1n^NY1G-cwInSI?HXklgob@
z;?@ZXtCJlj7L|n^mU62U<c*d@3Uo;}%wgrc`6N)-Bl$*J${|7ciM%u^dM=eFwXEYP
zMelQyxg4XFqPt@pw<*7gCVI<#@WzBW(ilM|!9+@Nv5f@ac*eQSBN&Ga3-OCk07oWt
zBw8aHc$6^RuhxT3)Cfi8qyqPhR>$KPgHI=@$xK}Q%pNP_Wt3yi18WLGiJKBNIsTrP
zzc`UCk(fyNf=i7C-81_v5jG^V2N$j=d9logNQzOWP-1UF*(0VT$_QbOs<p2ND6A)3
zMN!iGK|~R$W@7lngN28-S(vO~m7K;g@?XGsriz>*itP;@DXJ%I)j5i123L#!x$BCZ
zn#Le;G;4I)69Sx_j@|^K+pZFL`dlVRLWQw0EL;_mz}k6{CJLl>n~sAP3co-GVNVT^
zIpvpZ;8k82dV0x5z-FU?<E*$(Tp3ok`hpH$^fGtv_f37_qhGA+g~c%y(tvsmJVK?O
zIlN>Mid<~PL8A?*{`{YatxgDC$*f=Y8VTMmoQp(i{teX#|BI;Nusx>tV#{1WShwU-
zkdyjiuER0CbtRTAZ6eyV>F?m7@^<ZsSCZOmNT{O@#jsdWi}fFaMb#F!`#H8CLl8~c
zSs};U)yb}i!{S)eZ>TZPVfvz$r3w^3|GGaBvf~LLolSK}ZT_7Gs^}FLZ5vajm|~0^
zIO9sd*7j!&85a2Su5=u0)=^DO{pB_7|8Yi}s{cjK!a+4SyeVrrbbRF!d?DZDmkDi^
zgd1VQdS?_ZlBfB6K!}iVmOFuAB&OnK!A4eN9hlK$943B`g`E@r!r4G!S6#AkL$t!t
zTBx;C#2^3jiUhY7U&7Vv_ZJwhtp)S)Cpp4|-~x`Ax)P0nIdzY(t{yI<F<5|nK;@w1
zc9)&`&wPl*7s~}$Vn!+osjwsGq!vwm1xIrD7Uiyn=V-#_jEDhU5aE-Enj2w(ts!r^
z+}O-TTBl(8>L-$74T8{N00muyrvwa4TRb3YqF$q)?)jXH{0XN^2%dTqZWxAZHje)a
zgNSa(&UUb3OvT7~j6$q|Q(Rde_mCJ$0qS${!3(-DqZ}cos1q+wfobzxJHBY*&@vtv
zbfYJdV$ceCn2mVEN{h*teMm7?cX5*uLOBF09si2LCgJ#xFBmoU=VLrkpeF)oD~VtM
z_NXuaA#0|x=)<{_{g217IM}Ghq-B3~H~AU^5#TC>R+(tWGWHqZ5Qean&toZvV<|46
zGI8|@9bipmNe?W%VSj#q0Q_?(iPGZd?hz0kXYno)X02g+7+$r@<??0{=Dr%>{^XCj
zOkPvMOgW5Td2by6+-gvGD#1;icqa-f+m}^$-wrDK%H=w!T<+&wt^>>E?pv;{kO3<k
zzikS0R>zJ=Xe{{(8!(7!cep`hMR4jjjHXn$m=Ga%0xd#;VseE1LW)dHVJ%Jmi%H{>
zj6+xxoL)9;g*MqIb0lOmo=un~+wP$pFG5mF5xdk9MHC<hgdF(yU;_D?u1W@5F|hxF
z&t$pM60GHn!F^*!A`@Miw@bT5dh`nxbHye_{|^yB36XrpaC2J+7`|f21PH)0nl^@b
z6PC?^AoWq$ScAo`cONmg%TWL*(BPNdy{I}8e`}!K#jVlKv2O{qW87~IbWLw){SN`{
zG|;yN`dh=AG8C<nUDt@76m*rIbVCYrBKC@Hp)UH8AB&DM<;@lv@<J3Z%U$UNnm<FO
zr3uuV=!TgItLPBOu(N8SXd--}yK#Vr^CF={yut#pp*hinta^CdAMSj{3faNV8BS<z
zecBnwo-T9o;x!jID`Tgsq9s^Wc*R&!yXo{Uw>1=*#DFF({-4CtxE}alfhXsETp3ZW
z{C^Tt<I3lM1*Yi2T^UU*EN1gRBX*Ip`ya*)EN#J&L1$zmZAS(PdeHx}A741HExH8i
z(u2y;9$&bB(d>ZpfA}A=Co+jcnr89Wd(kH%e7uoM56Md8L$@@IFI>RADKV;}s|ZpN
z52|UHCm+C+Tyr@}8URI%Q<EdF!%uI=wup~KMih~3!L{q0-z_)aaBkL>q8nVDOiq`|
zm_%I%U^&f_i~XX5zQ?E14IOU7nGl=1lw@bMqQypTbn(OFEZzY+H9m{hD2b|bi5^5`
zEtvEHh={iwUI?0zKiZpUoq8q^u>HP4HiiEp#w|SNC^JmCpU#zcd{cx2PbX<OUohFy
zWzwLHCSU)TFd10XpaEVLmKX;USkPGGLUFQ{JZtwW#4wZlMdgk(pv*`c8cg&7M0AM{
znL4?3UrZIDMW7K=Z`-R68U1n&nYK|YMXs<qk)4bv1A_xBP~#?8Zr(=<#D~u!@jB+l
zY#Db@AISX$DkOnTlT-ILoG`r&Aq9yaSfs$k1k|<5&H5h<Uvv+$-;R&>-=EmzQyvIN
zLi89N2I`>U;;szWO$NCMJ4QqNJCYNrQ_Kg}qU*!4@<kGuZ`Zir7%Iw_eUZ|61epCK
zvw9XTjCw_y<xd5>3Jh1!fgs`4Op0S!<J=q?y|T19fhV506wu*VOjPYp&(@AdFug|1
zj91gweRLh#FEY!P7hHW^xPceb?eS*hIBaq|7rPV2W#@SOg3$tT{wGzIOvsg-?XYQr
zKOkbE3>y-+D9D(xZDEX!mAza?VzvRzWG-{DiR7Xx<+Jpt8G{g$Z>e&enKVWu1h(_P
zAO^hTMK5E?N>84y3L9U`xMza+;#rLn0hdD?448m_aap*GMR|i(EsorC%ax?9@>HqY
z+wT*{R>^&iJJsvIb>-B5N^8*_LE5dX3ccaRD0pjcrQZnK{O0g7(Iq+}4|MKUo?ahs
z9I?U$OBkU{dh|<{B)^1QU95T|;DCko?>M{ZO0ttI@%T6>9xochlHVGnZGpsEwBo*<
zMnU4+07lAanPn(OE<X(?mW+NVT8*?DKDB$Dnj({oB51`yse<d4wLjUHpEeVgB!oZ`
z@5)qr$!jrmfz)zU>2u>Msd&TWZ?9j<b5cCj#Dm?Xm%M!iC%W<5?GfbMeBu2LrtgsD
zrXB5(^(s8m+3jm#$cCd08sfDs<(ZqyNBuSQUVKO#MN0Fy-Ep<uaLbYk0n^vtAN@8s
z+CAIL<w&PgL!n;@9XRj^soQ%&je~OWXhaD~M8<1II;*&G`Ajs7+np0v@mHtDm#E3c
z-|oS%E0^w-4!bAtpBdGR=mK3vFpGsB%!ym|V=^G6`1-DB1(7mLzD`d2_{1?@_c@V9
zkm^Ar$mb<Xjm{@D1Lk!e0dWEv-&I|3E-UOO2zQMNrgXiL4HfADAvH21MI;7-a-hdk
zB6QpJ(lIEKtz-x{cdb&J+KP~Pue>$=lU^eo*B&1TdcAXp6p#rNZ7KJs`8MiwHYFS0
zr8#t5q7m;*b`aqOzP;l<Z%n}D&b_mt-hL!mvYD5vLRtv!s!xg!zSjj2(Sg!8d0_l;
zN5;?zz`c9;2kSFn)8MlssgQYrO=|JzO7;Y8KjaTO#&{E~YcO99bB^U*ND)pW<<5HD
zo+2$62Vj2)Hr$Kc$&0*#a5-TtX=B^H#9PsJFz~3hpg0=CIH_G&a~xf^v@ii}dO13G
z%B0<?FA*O&xEP^iCBQJ~0aPb(;5*0Us@g|KI9d(8gN1wS$fRO-Z=E_xJ?!GO$4}<k
z>6hMHt?O@GFM_=nzguQB*pJL4Ik#--;l51oxT%9_MX@<oaRoM0!s24|EP9m<opB`C
zr^;U@c%L?Kx6dz{4mr2v&uKCS&jY%85jsv(;@k1L7Chg<cFNPNJS+QXznu35L%i^X
zn*))6Fup^a^b)FS*I!q4=s_?@4-Q_9L4R=YyH7)ZM1-#w`gfq`Va)-gjz}@+UsZJ+
z^!KOZpuay2pbMi-nMPrbLpsODUDc$COJZ9-_m$-Oz3w+J-#y3mdk1aCs9$%UCU
z;NT`h*hGy}hj`#a`H4>H#8c%oua+rHM!5m5Wj#|82(TnLPUmkw_uz-B7~LT)z)Y2R
zwAkI01_2Xr6c#grZabngtYel}WZQY{>>_sSxyp$&HDWolWQSN#!(owcp#a;?rEwO~
zGWjgZ#7w@BGL|VC5euk_Upc_wwiCzwxujh1g{XEp{E7c@XgN?7<xo73LbKm~Faqy|
zB?Rcg65tu>j$OyF$^`;0LE4WKq&Z0t?F3cIHlP_e@snejwl{)!{$d|&$A7SmFS5rL
z(_|t}>>E_El8_vOHo2KS_5WP(f*AK)6Rf(bU<}4h?sco6h`UR%Yb2oGc*IP)mJL$S
z&q_x9S2&&P>!(;2=Xr!-#z=w2g;X6mw`A(7FGHj*my9<Yc2`TL!xf+=#L^?@BnhYI
zaFCAH4QZ<AN(Ldnb4G!2DxoXg-QW$VHjooJlO^sJa@&PqWc-^diIrA2QMAd#GTc#g
zSv%Zg6w0U<i7g3u@EzvYnA^S?W^`#-OxH4=1rU*OdHe2&lIgsw)A~Yc19?W1c;2mM
zO;>Y4i-|x8G$wC;TZa<D*ZQ0X{YteC|5UBsSJkrZOu6C46Ouwx0h9zI$KMWz#k?<p
zJzJ*&GHqj25a>nfot#92`61Wep3KECI&EaUU>><BfE;$NJOB+bMmq>Dr2CbdwE(D>
zgm2TVdcxlvS~Ub$ZZ^-6P8p>#Jdr0oBl_~i1cbH3IgxLJHzCJ2YD;MFjoMQ2xp<6!
z72AG&BCiiZhWCYoI}!U5;zj7y5R^UdNn9FroM3(@8rBIWFE)!4io{lNLXp@gPAC%F
zL^CI2%32JE<&GJEBzMfHB)MbOlDSSxf0h2l+{Eh{?cs{rdrX~tRqZhy_f@sW6t9dv
z@FZM{g8NSO%@<SloL`F<oqMUwEQ7>0BiGTbwac`}&9Wx1_>tAWYIQ9LMr4~gs+={G
zO%b}B_NP2<U30zE+s?EcR>-bypCeoeIn>nV;CJ3~>M@)bL6!Fw{sctHVg+z%0+L5+
zu?v5ZyQsI#7J;p=Wlsb?7PkvkH+CzMN=04hEffFIE_C(vKiLJg(fsx1Cz-d2{)73k
zCgerlgL{PVV(QfXEOjn6{^yh1y@Vuxy4|U%iFCNQ&96s(P|)$@B5@#O5!$^(=@qDG
zmYgHuGlhf`rtm%-<=u|SVs%x9q;8ws3gjDh<!Y>bNlRZL=9jee6*`G6{b#LbL}7-+
zXiuZ(Y{68y_o71zi_62=>jQUrPGl>y;Fdi<8y<`pi8x2&UoxwO^{Ip7U9_+;*c~2i
z49*b$%U4o9!4u+TY;6dca))Jql<j_UH5QML54Z(E9{R;?2Y$6<I#klgi`M!oKozu`
zH=kmiZw?Gq(NXgg-tQp}V2x}POmoHOm!8PL77vCfv3m5!0Lyd7M{}7klWm-JPtUUJ
z^Q)E0^3#p$*KXohb!&ZXach$o1K{15!BOw?T(;0Xz)hEfyRAmHj#oejr$G4K8eTVt
z+3xdqrBTi{2cORFmeJ<v@&4d$B}2a_`19oH-SRYAUV5^8)c*=t0^XE-N{NsvB*4Y6
zo&@01Eh$>+VfFg`>0qmO(hu1wg;>$8M~zWP8zsb-;SVE<u!m*AQy}cDkJpZe2M2hS
z4Daq7x|fTm#fnTQfvL^uU<uV;xUF}Dt$}yevGwjtCQq)AZMh9%`aHvqpHp#0OC;RZ
z)1{R)Jb~B9O7WgCIeLVJfazRmZZg1{ZMTmbj6zi`)#&rsxa0{hbe-avW;B_7k(+6`
zpXtj*{hsu9r1)3%S$g_>GjnxAPw3Q*^o{Q7<)vFs0bQ1icKS_e>v;PQ#HzFN?r;l_
zx#^Iwt}y5xZdIzaFIh>pCh_J9Bw-KJ!oz$Uld4WTLUG#%!csFgv+Rc-pggkQ*Pdqb
zFz=bXJ2*J~;fGt(#qR|OxP|DRzVpi`*NAZS-RuAV|NH-4$Nsas*Izc)%4;W!gT3K{
zf1eIE{{48f_wW5)r+@vId)MxKn)`Hk!jWd54iAn-bD!>B?=r4Chu=&tUC*S*+5X+@
zA}9hbc`IwoHgEST^+wj}%vPGUdZ+U<by~YrZkH;x+m+^Ay*yW~X70c1_pagBozwo#
z-1^dr>keOcukW3moy?U=A3uJa{aBklKHV)<I-O3bTrE|rw^8Eu=rhiPe!6`$`d%Bc
zc9sUC9-g+M3d-1ScN=f4-@SgF9r^#<xDHQzM@OSs8RKm4_^|Y;ds3>*mP->V-CsT2
zy|^OZgWjD~eQoXH%7=%AHAiR5A21Mym_m3*G!58Sq*iMA1C+$~MPnG9tq%f@uh0~V
z7dF)Id4NvdpB@OE`n}Qsch}Kc0Ev~tu|OJq#iV;=pi-@{5}0!H=_QCiE1eYM9q0Im
zhsAvwwH13PHaOzGWH44S&)mPb8T2n)t;}`@P|qzwF`V(a+`&Bx!|h7tcD1uvY0Z^8
zbB)&PJEdHq(63ZCJ$gw4NwItra-i(82121+bs50%=_b67dn)m(2hijQY2c~%Y;iHG
z*08=Zv)08$>SxEJy<5?cT(w+_n|tpMw~xATm?C5WWugn_56;q5%QzT{OvB)f<h91T
z*Nxd@oO>}R_9(1#ABX+3J>b4Ba79T0s_{yD@;3H8?Ar^qT-rs|up1X!M(#a)x_m#>
zbBPz#lgY-tQs<9SeSZGg#{TPv>$~#{^SjIQ8}kdR^Ycrk*0cH1^ZR=r`u98k?%wZw
zTwPjwzcxQ#f3|<{c>bsIy!^K?kMjI)dH#p*Kh6Jr{uwLdzi0CcrJw5aOZzMP+tr5$
z^Y=F;d48v~J->>~-Dk@S^Us$TcAu{-?C#%Rc=qby;>X?l3%k3&EzKW4TKstYNE%#P
zm|t6(|H%J6Tbi#wU7l}0Sz1`zTv>Rwx%}zl_We(z-h)r=9sj?N%MTVl_8u?ImtUcW
zSNHdxudl2hOTIMd3&xeM_`B4`K%ebm&`WFcAD7p4$n&e~^Uv1SF|_6Ru8jV{JV*Cz
zS%)nDK3kdpxOyLGd9XOYkKrM2cXcUWP8)nSzlhNSFTK^pXUD&x=ps5;n%{l4h%{gX
z4IQn4SZnJ5Wo31J_0zK#%lDV7%fsHQ<>zZB_xBb)z5MiS_;f)Ue17&|Z|&3TVS91?
z^X`Y`gJ=I<-`s!q=<}=E)5XWnpB?QtpZxprUjO;)2b)Xf_p7T9kJlb9?(M$bdkECM
z+bF*{d;H?j!s+LF>FKgGSb4Hpe*OE)m4oif%BTMC2c4I%t9vKi!?V%$%f^RSwe<=%
z7uN^BpR{%!RDRm2Jz3s+)qOBrJ$y8*e}4SO@lT8Ujg1!vCxcgqucg6v+eZ(pgQLcy
zKTaOKJUnR*Pu{(IKRWF;KOC>m&#z+mt4j;dz%I{TEiZy0wu#%l<)wwi<&CxH%PY^<
zAMdU1zW%iPdik?7c)b1K<I38D_4>x+#g!KihrJKW|9-f%zO=j7-FW`_<?vPOx5b6p
z(~ZZ2hs(R4`p@@2?#hrK{_%R{{;<E_UwK|@zkBlUkDqr>q`~q}PyfC5aAW^$ZS#5K
z>H0zc)yo$r+rO_=2ESL<4_+VkkGn5VPPgw@-fveg8@@F7)6&7imoE<*!`Fu=?|VnD
zn>+jOp6s7=yGQRH9lm?l{Csx$?xzo>?)>~mu*v-5GFfb?J>Pj=f7e?1{Z;&rG?+{K
zOP|tU+Q(mN?{{f1f%&hs_evU!aqt)0dnXO%5&Ksfl?MMx1Npkr;D3qomuU1~qWpE4
z`LCq>bwwsP{OhC$vhZJ`{Ff+sgK-60A#8Jna#t=Q4F*z_O4Vm~?}nL)PCN1wlRG8G
zP7a3YG)z;|*_pI7S2&&H^lNQxZuMw%#<1?{(mf>14u}1@cBNI@u9SCf4|=`I?RuqK
zzP;T+V5idE>2w?AW~J7yNyBON0HtgC39i!~9(50vj(d1{9noj)qK_`hy+(bzwNt&_
zt(6<M>)q}C?RLGfbGu*Pu57nk)mnF_Z(S5LGuBl>7hf}qsQOsb>xlRb8L(PB=#EDB
zusPs(XAY4N12309R{sGay2q!VbF?A>HwN$0)IU3smf+JI58fOf-E&tT41m8RJpdLa
z(^^0x)B^<cNB4G4j}J2(DL)uuS36oOeY(x<3?rOs$j*+F96`ZY1Cx6h9q*id#9G2U
z?~1cH#SsF6Y#Tv}N)4wQk|2dPp4OY(es8aPv^(hEE7`a$VRDs^dxIm5`G5&)<xK=Y
z8@0K5^`~-Wu3WZuq*T6<ViEi%1myJ~S0~=^&&sc2H>#c=A_t>|0-nZVV^M+0^-~gF
zF+}wrqJA;qG&L1S6Yy~XcKU5;aEg;|{T0d#<@xf!7x0N-?OcTP_wT82`~6yDr(C<;
zA9O3Xx106e?QXTzy*=38DR(N3YOPs?x*4mRAlx<GPjxLC-|p19mF+rIZKDNk-t3p5
zbUV<uy-KrQ@3i{OYR4LnY8N%m%l`k8Lf0V_G*i?YR?#LXUTr3qADS@2Mf8dE?45pZ
z&ISBpMR#&MI@7g@JEc$}Y83iz4vWQjj&gA7)E5@rvfqZ=r(K-1<SiL@N=czyWvr(1
zu8w;vU98|~QA>(S!U!XdKDXBWBrCMTe-EzCTZoR&eY{sGH)mT_EF2;-DuH#Rg$`7z
zS#r;nY?do9=UQ^Fuq2;(z4vtZ2}_SwP?AEcg7O^PQBxEc=04__M)xYdxJ!r{awQ*h
zM=yq>;r78GUW7K>U0mp*)}G)T<_V7RoK0*hlo)Sk<74-%w|5^q*iVWg<Ej2oGb<tU
zKNA_B+hsSrf9c-RV5j>Y_pfO8SZ_y$pzwZFC_t+nlhDAEE5fy>dtlI9O1{!pYDdzv
z2q)T1wAd%Sps83*XVFJne*;sO8mKk@_p_C27*|90|KX#Fp`{)?`!!oXJ*{x5g^
z7hPY4fv+n3U+(&5=(-j*Lc!y|d;KG}IZa=**J}FB#2s6A?v&{1WF^~fk;$bblJxu9
zZ};v^%YL)`CNhivOvkSgMvYABk7vPcmzZqE<L<E1!qQ@Hi`f-+J}xJ_2xUX7-=cY~
z!ke2%y{_y-L!@lBQ*C$j5{3ipTe)_!JNj_#4PLmx|LMPPduP}50;Z!A_k)>-$Jff4
z)jt?sYqn+^m3E^j3EK{b*Lo+{dIu-hnw8mV89g?dvzS-3*-WD~+pL!>S))B$Zq{m9
zqdwcJ)!JFDGh4=;fms7v%&L{Fjyo&btv1eYUu!mJYaKLFug_N7l}grZ%vNfRYSySB
z9iO>APy>C`EA_0|o^93uBzvvRRx7P))~e6eTJ?5T2mG~Wh2M=1Hm24asDVCO*zrO@
z(MTOt%FV1*p6%4@RrcQQG&)%mH5#2dTj&s8bYJE-Ys5)t6nJP<W--`y28b#h^w$9F
z6|{y?H(L#Sw`N;qj=Bk~G-_-G2&mV~z*&2?)~I0=<=J|(A|1EdO{AxTQ%GB_DoRuU
z8bHQ)0eriRE0ut|db86ccI#*hgQ>UL^{iH(Eu%?%Hp;aYd#wUjWhv0$sH%0q3m{Ox
z(X7|xyIEro1}00mluBJI=x3u{ZAaw=B6fiCHI5u3tyNnYIs{8#IMvx^6%?t}W;>N8
zKO3D6Ap*#?8Zd)|7XD&HtvWg)E7iyi_;!P?H<VH0q&7Gs`fgOqwd9+4Vkbld@YJp<
zZvk~xFkl^QhNODCB_pdf!EP<m11Q2k>eV*Bn*>-`1xd9=9ry%~R6xaA8Q(48CWORW
zM0b_2g1f3M0K$&jU`PxfNtH5M1+0jv2tPVd0b!e+)XUgei5e&YL<k(!8X7?hEkx7_
zXRTSrWrn$-ph~4RTdvoDV|3EQUyQC&o$a)Vc90$%pW(X-$idx2JAx7Qa=Suy0gBlI
zsMG{@Yv5a?%h*v1#Htg+AY#2u;x)n6KqChRdV$9TJkl9Ot8IXX9-1vk0B|Gn4eGWb
z0H{#~BAWyW1L%;Iu)nZOMsLi5;j{c8SOZc8v{G0r;2939Gh3~KODNx9Kg5LF5E_<{
zCU8$c72}6OsI`<=AVl>R^h^^aYeYP_sZ*^}{Zy-!M%I~awA&alq^;dVOT-0G)d8-+
zfmJYa1*B<#VSxe=KLZ5K4rt%3Qo?m$;2<Cs`U(mJrvS*Yq$w0u8{Cl_1$uy@tJeS&
zdH~y0I50F(X+ph#gv}}{12<5-LNDqob`D;Jwyakbn}D)Swgd^QO<=JDF0DYL0nTct
z-OBQP5S`>b)UE>I^^Rz1(4^W1KKZvoHX+q0b@*Fuw9zU?&;}EN!^#cOAQ*qO(ZMj=
zurievc?k#=)lny_<T@cj!O<iO5YeJ0CmpFJ&>xbT7-)uXj9*X%B;ZT5C34FRK&Nd`
zOIN|p)H@ZZK<Zh1SAb%G-2|hOICb7d%L>3CB3GIO9OJuLgJnRGMg<q)K$^<z80Lr~
z%o?x&P3ShrLap8+XVhBg5`0Nj3JSm~VYtw19WV?k(1Ia~CP_#EuE0V1*#RZcUKyw(
z|G=)XLVLCi6^0VnXx)L#faj_lHpbg-Qi}tCHuwSv>p&Bs1}zQsI!ctA%@&}jf!~24
zlxU()h;6$JsiPp2QB$fk8+C9v83Z-Zd%MyGG}YNMM1sU3{xH@mu!8cmNZ4CR1XWtV
zT?>dQvp(3jiLKyZ<{J2kHL$d&J=7cR4n|gn<)o<;r9h0eIyLE|hP~qi4r7xZ%ILI)
zZ-{P-AhjW1G8o7pdMG#0a46j>*UJr*f&mAz&^nIQz@PvpO#spW{p1tQ0knyXxB`}k
zivc*QKn`V^{o@-3mNH&%)iE;OQ>;7;VnQiENzHaTE$|I2IH}bDLs0v+h;i^s3v5lq
zQ_m5d@E^bhE%h6Kawr*y3Y1fm*gyf&Srj~Z5elNygq$d)04Hid7o$L>UMClT%P}HW
zfQ3W@4fFuL15!5I$}r>|YHxH^Z;_dyVp>$4U>sO<eq%@wBhaj-mX2x^a3HDKfl(s+
zcHkYMi7HeL$O<N`fgh+bVRDE+N)1~DV5kXZLXj5eiYDN@pb4N0_`)}go{|)DR~B~w
zk>olg7T;i87$>+PRrE@^CZ5E-fc8W$Na}!XP^4XMu?kdP8IB>912h?{fL}SbX1NA|
zV-?^I7$)ctNN5(-ct~uc0F4x^18p&Mn3M;_#md3vRKWWv(XOLOj1>aekZ&Pz70!~d
zGV~rKSm12cSc6=r+|}sdZxvpwIG;3Tt_r0VxCcLW_!mV04?Y`kK0pfaF-<7CZh$fv
z1uUVU6Q)Qiz<`TK1Nwt+(WmGU5Ep$z{czl{Zs1N~IkW-%i*Y84Qd_`2K|TOR+X(=$
z4<if0LB?yaL{RYJ+K^qS4gq2d2t+&8rXm)6Me7Wd@&R8mfDo9Liv=m6;6P-HF#<?n
zqk5GJ8>~oeg5DdjI{1Wig4yBa(=h<WpaWH%LXnVZ0BwbB0wyX8mJp3kx<^KVh=Mp$
zIib;Z6Lf-|NRq&!5LB3=4vi;EQHJXf20H8@U7Ma3zlD2gs6ZGr%p{ok3_gq4Y`UBs
zh!ZGLp|NEzFzxiL+R!kh0H+k7CX=er8Ng^6N-wL?^;QhaVCX}Fgsg!Q^!b46N)v5@
zs`WC(A2_9HN=AagalC{OXm+f^;X;Lqh7(r87v^!I`Gj%AC}SAVh}AMQ4o3zHN&W?L
zg<tUvNro2&U0wx!1UdK%5i*uXQioF?6AFAcp`5{TkW2cf;%Ee+LQ028_#<Km2an#3
z6G}{|+HJBuq!!+ez|?@Y0ymPt^h{8MI@aXA4v}j?C?nN?Bv>QW9u>~gz^|MuR-s*L
z(8YDoi?f_a0oAFan9>xv#V6DbJ5d#eZ%DjIe!B+aMpOZ}bahM-!ZU6{8qh+gO#cp@
zfy43bRVk9BQPZ}V<cZH<+8Ez$s7rFI)7Plc>8Kj4!&=hSrPpE_AD%8u451d|4WLi}
zz01fuR7v=T(?R6mT78%<e7C6rBfA5qu?$FAL<|!=S2z<Sh#D?>wk@)%vu*6fVaFLj
z&R1z|#bSzu#N4w<r3E&^f3VOPc}+Oa8(EnWf|@kLRO6fvbI#$-G@9r@L3lF`tp_H6
z!$KR++R%@|1)#r+bYGg@8KlKr2mn;2nsFWm#?;~D5Z~s6aJo#L<=hl>P$|QBniqp_
z_*Te{9363JM6J>jLIV&YQJVCV&;{fc4UkU(8PP@&25%!t=!I{_CCnE?1Ds1pHio7Z
z)Vl)J=+6PmZR#25KJoWRDzIGS5pvo=@j(*UP`r0&TtI<u(gTc78zb5HcC;*W3a4%<
zrx37zRKT>6;4sWV&|YwBQ37gFl4#8F*<g5qI=>7t1O&(hj51geVAg0*rq#Iy57KSH
zm$=@Tp_J=XaKSl85~uJ;p)bHG3^pZ*4?s<i`Z8xjwz&Ts1f-60Z!-pvMTBd_IEb;J
ztk%GvkvTz<;L<D(t8glWZyF?gimAt^nJnl4da|N{Y1N<`>6h}GMvvMR|3y}jnvfGx
zkPD6+^fD|MBLZSpA%qm)I`pp4OjRA2MjUopW{4!*pPCqGus)O#j7SyrK)n`t8{>un
z>d@0N(~tQywHQ4E7)OE>8w4T>!@|5yq9@cbun|y}m;oUPP{NvVswQm;+R-VXgH6h)
z0oBT2LQc_x-p27Y&hUXR{Dn?v@Gt1zpn3<7YKVvd2u#jsv7m%R`H~muw#alH6Mr$9
zs0bY;Jc+t+Xwd`QFVF%?4dxWEmzy+axiKgc%S0W(a_Wdtfeqn$0Oueprn)3nli<Rt
zV-pI#p#ibig@zcjTa^Sjl)x^Wr53R)N)CP?-6^O)e8yd%Q|chNY#e!mQ$F;Hq%xzA
zfJ0(H(2P_hI2X)j;54FHL=fxnXaES%2(*LW==P&q2&xVr7>2`1#?tu@U}Wfuyx0UO
zAWv1ezU1aIC$EZty7&?BC&a{)TIduqMt6hCh@Jt3(oqFT%?|Y)Bpdcdf`F_-&#TIL
z9=Myc5cEYo$niqQGGM_u1L74FTV#Os8t}T2*#h0EysA12V1z`RNc!p2kDw-eW-3sr
z4YR~KZl?|FBF)2^G$AG6BlyDr02HF@2UNo6#AFuj5m5{Y(<TxkT03+Oe8Fo%$dfh-
zcmie_7$WK=D1cNqi^r%t@IDX@slkZ^RY48l5Z?&GfI0C^VnMT%t8f&ES!z;hK&bNu
z;HNS}ydpyh@DWf;3k%}VwQ}=Wkd$nD8;FHXg4G5F+K^u;M$Bp8hk%0-9IIy3oGp#s
zLLEt<<Ti92cpnT3QwB$aT9|WDx-`^@h}}s@5RkzS!t@hK2-9Hy4Ov>$0}3|Uzy{=w
z^KV!w;b+#sFq^<SRT~k4Z}|5dEy6~SHwYLVUrZybkTX;OYh#R(1oo+ly9@^nRt{9h
z>;$td44+Doh8Ko|Lf+y$1!OMMaIg`e17izC00pL7)&g8(a4xtVV#hvE13oXEV*><I
zM6m^g1}UUgrnWW^NCtzG(NG~95{ENn;9CU5kR{fq7NZk_(5?U*<ZjN_K@iL<NyRE+
zo4_-tJ5(v~kU`i+6%+-mk_!1jDlkQ40bEXJ>JTO<JTNAOhLabPO1x+YmCTtzf0?<l
z8Q6jvG`Z&y$Q2DYnTUD^f&;IQS|MUII477)BFXV0klwD+1#!HJZ;|1^%_Iw>9prcH
ztA=o4(!^+tlLtik+7fdNB17$s*_)RtNLQsM4!#N<l#&1u$t6?+bR4IYD!RZuf<}xw
zVqy)Z2DPA4n<D)+=n^ssEj~3A)dScFjaCuS!U&=1IHl1kF13qJR6r)q)<pflHb8e&
zsjeiTAu}3AXGMECn*zKw7>1&L1Dk<D;7WW`|AE_K+(BfWySl(Fmo|ub(V|d^;seo-
zp^^p1(p4l3ksd}8be*W~W)mHA%1!McsvP5>q2~Ob+TO)|=!(kvfHMf-^fH)B4F()w
ze4{fMbJ`R%4P=4)vB)J3f%wkkIBH`M5+aQN50noug(wj86<u+tOGZ)<Xcap~SrMFf
zq$j$*#68t0BIpu|=GsC-%#5m45&>0U4KNn~-=G`d3cSEkAbKt;9;4Is3-|<Fw?GB5
zI)1fam?1oBfT+}=SY(j|tioA)8;*Ge9Dy1Tb+9?q1wAj&5aAB$7jyxmNBttIQ`Z!w
z0#y!p$E_)1c7$(gP%DCO38dLKM-E(Kz)Zmmj7Y0+w!kiH)Qd1ZTv3Rif;yI{q5)2{
zwn11M7<7Jxs<jn{4$B}eq+ti<2r~#25!`V~Br_S<EJH4t1u~B;S=)g*qo~PB9_a&f
zC-kB#;z)><IMyIEW#Ed-cCzS2E}+e&oJTGShVI^Rz$*hKyabdyuaU_Ujkq{!>vS-}
zx~={nUxmMhD~~4LOoNqVt{g8OADv;ReRMTVxCEwqg!f^vaD0MtxMyCj64!SW&+S5-
zFLG54ZcOzzu}oaVp4g#(=+^%@**)bgMT8IgI&rVc=>-FcN{wAo^rp1DmS1I$uZqD<
zujwNHMCdQ<1q9(UnQuUww{Ne##d`mN5JUE`Z}GCBRe5*i<ZR*{L&zDwV@U5Ul1lzI
zpx#+@w^Y$>Rfe&A=l#${@kLZ2Kf2~fK!~ei&%u)wplP+U^^`kgao0Vrr09aW)5-lo
z9bf=&8sq->+`~!9MMH9@&2*_d>}-wphbLQoG&OxbJ;ghMrl;`3F58pab=Ya#>bX3A
zghww1xCsd7XSi`1Raotd`#S{|#!pGZrS*90h+pJZ{++RLe9*f+IE-7k{cB<k&*o_2
z;Q07t8n49qJCLTo$WD&|P!S1HJhVXMe8+Nq)b!2oo^IS0!od=hGhDQ_!XMK&Z@Sw%
z=9KtZbaltf`Yk#tEHuB`-f{)q?ND>HVVJ-pbLIGSE}MDS?d@kTaplx-bSs;=h4jtg
z*#WK!n^}B+wuNhUw$`5xw{X|l@$BGa#C&NGhkSVP2%77ZDwPs%KtZRt`-BC$M;~zJ
z3473S;TWbswP_g~xdIn_;X0-1oA<Y`|NQ9W$=}b`Uhn+y<m_-Xdj0GlrOMsS2hWdN
zfBdk&(%QKG>z(!2uTScozu&!ebnkTM_1|Vk4}UtHf7E-l^5*-_++Mrg-#>n|wDf4_
zkMjEJXy(Py-`;iZzO3NVi|da|r;X{GkG}hDeY9|}dvN^xRp+OtFIRg93+=UkJ$n4=
zcxK`B-QxE@?fh8!^}%mjw|9PAUT@vH`QV>hdpoU#fA#-<^7FIpcgt%pAKiZTbNR>T
z|6JT#ditufa`WiH%Ik+m*Y6Cs_kW?|@M`*I_0jwLXKzmbaku}|FF(Hep?<4*{OtLy
zcBlEb#g)0Y)$bl3bzZ#K{M(H;*Gt3d)A`NL*}sPKFOGgYd$a!Js4{%LHuv|(vw!?L
z)9cOrGKYb`?)><u|Br*^>ipcpVP*a9%lX0n^v(4b-@n~|{`b~e>DPlN|9HO8{b|ts
zdHtWY*T1Zn7Qegs^dEx<^=IY#-+y<s&^~?s)2%m4hl}rOKMilc*ux}Y{<qcD*@O2d
z_h!rQHeNjG?esQRE6?vXPRqxe-<|!q^dqKPGu7#vb2I-qT<z_T`u})%_lLRnvupKR
zn}7dd_0I1<maBVf-~Vyr=9_zG{W~iUpIm>qvw!c-@u)s`_wLT#ey?}1c>DOqi{9OK
z>+E&??Dvho{dV^LS^baJum8Gn>&Ebx-xd#MN)O-s(7Qi<^XZ%J+j~E}FF&a7*PgsQ
z-dy=*;qA=+TBp1<^JeDd-rxS!t<7xRe)zZD_Tb&xaA)a<f6d)G`So<U+v)eNm)^Bs
zZ~k+!J9l^f@No6}@~iKEc>TxC+VkODWB2a;CuckJ-<|ya&$rVzdoP-+fB$K&ee379
z)t}!!`t{wb=ilG$EFAqZ_u%@SM}PnE_H6sR_HWB~Pk-3IdH3hLbN5%C{k&efRhwN}
zKe_en#_OB&&wl^MKNpUx@5|lI+1_unKmM`4)-A8!o&WW>o1OLkTKTv4(>D(v54+_T
z?VldK__00Q?S6mnm#r7qt2e*9du#aJ&Pway;oHu?Zmj-teEnauwZ+G`Mx}*+&NkK-
zZ+&-X^ZK*>7f(C?TzY@}$ITx*w||_Q-+uku+HZ%eqsDJ{uFnidE1S3fR<Ar*n!b6f
z{`~l1>tyD}Kc1XC8P(tRo-QoDuAUyh*!$;`+CQ7Sqrd<5eEDAM#op?_{{F|0HxJ8C
z9^F_vEA?+Z8_u3Qy1Q`w@b{PZe%XBd{jYn^Hn(qd9xQj?_I|DW{QJGtr)$5I|5*O#
z<6Thy&a;(Uf4jB+Wbo==Crk7Hhofs<GuCV4NAMg3NmBONC6yFKN(qUI(muj){_py~
zA7`$aF|{`LZ+EZN92WdjU3G3k&6%l>w|rx=({9_yr|-&vx}AnUJMh`zZgs-pQT(yH
z_sw5<1HGKhC8m3NzSw>XVt;>cUJ^O68%Q0t+0Q>1+ngevrBX?A>T@KTzq%`;dP<g~
zIQdQXZHrnK!Minu4QgHgZZ}+g2DgyEy(?hP?AbhR%7+c+{N))p**J0!zcen2_Z%JA
zO{vUQ=ytLtGBA_#jGf#kVoet22X8ed*G8$kW<JODN`9ZWt$xU`2zrz%h`y0nhSrBz
z7o4pVToi$UVJZEd*Qh)#s+0|(tW&ySf>sGOr=7O@5}SnNu8saF`3EPJ%K{ViMNECl
z3bQb1Vt`g+uYTTa`5m*t=9hDSUH;8VxY0}c>bLWIbS$wo-`<;l*$axXx&PZQLh0_)
z(7D=!EjVe}xwqj;yT(nC;)}dZ|H0bwXimuWeys3si6k5AiG?HV`?|7j>FJ?OkGiv)
zj8{3YildC-Hh$x5yz_>7aJ8wbbfzDhwcB_;7;pc0?K61FpWDxj<}-*5Wg5D^?>Y|N
zSmX8>3uD8Ju5BMv*8`E0Tzt?(ai;QT8ydfI)al7rGkaC0hF-Sl{nmYlKt|JQQES$h
zhNw`}k~QAo6-}|wH<vz{WHy|;jM#&NpTixE26&dl67b*pq%me<&CAkrv_jBVj9Gu@
z=Cg~PwoHppUMGi2EKXG_+?+}l1jZ{(w#}4l)pzUi^d{oz=~USHY!+sXRn=%usSjs0
zrz86-tjZzo{Dawu9!vz9`iagV+lQaO4!XY2`Pb!s|El};>IB6vm7iU>qP5#Ts{5;F
z#Tqs;+P7lfC~e1!vW<}x>&a3;+V|GP``c9M_2t(odJ0}|4;l{|jDC9@E$8`^EbR*D
zm9P^+K`efRY&-GnJ7l3&`*N(5JnG_<{N&u%pvzy<41Z0{DO%rBbCqq4eY%$Tv-rC;
z>rz{4HP+d$ujsS7qg#VyCAG)yKX~y(+VN}RY(I>Cbfn^Tc`#%Hzv6fGVbQA?E$mX|
zV=B8)Mt*{lPH(HmWqd4~RUH~!nQMn%Cf;{3(Q~Nt{nQOYC$!B9QF*pyH)PWyb^`Se
zE*eVxS#KVC!)ooa2y5dr1rv%=UfFZAVRk24Nftk3V>^N$l?kYw&Gd92;kf=bHTE^d
z@EAR4<fowDYyRj>SIhhU(DzKE**Xu4Tfk9KAm{(!f$_xH@`<k+wm0to_@u=&6l*=8
zUViY}UgFT}I|Gkz3qyga?N`s|^5FaxlJ;V3Yu%%4ATz{ausSSFQT$5Q;jxG%0rIa)
zy)$0OhNY~Umwzy!w`Rh6-ZBq<7dapD`Jf}6Ji~Zi-Vl8f&!#F@QnFm1pP<hx`{15D
zE^mEFPpGHYBIDrqD!&AB`12__L%!!WHfrMH2g?)im2$_StvUefWx}oYaz8K}Pp?^D
zk$iSOkWvxgKO<Yy!gac9#OVRKan?BI_`~9ks%USwuaB9o)^XBo>7w%rnwEd1Y}T68
zy3$a@b>Gj#!zeA+^=j=;hmn8qNLoqrHRQ$?Ei_7N0y5C$8n%w}bpsVzsd0Y^NOz!)
zmfNvOc=2`T>v`j`woYHqY{*s1Q$81O|9M2C$xgoxs_$BG{2h1t&S)62{b)Sqhs8hG
zF|X&<Tb^p#;rC5MX3s%`s?ak@FvxDZzsB!zf?3gd8v6*`mln+h$4;=T(DbtI^=Pl?
z-Ht@R#^fp0N_7FrWHXDzccyQ&YDes~ZtaiAf;TqpRmtO0YvEmv8GpQfP}RESuZ2_9
zIEB;3@m2Ib>*L@Le+u>f?I9A*^SK7)B%869R%F}da@86QwR8ge^0wfY>ig^URRc#W
zx6!NX?9N>R>|@!0wYWAkcm=+hsO$79=E8G7%1h#`HQI=0XUm=U{qOAYyMOEFce_6i
zlw0GyI_(q}XP(sguuPI^R4&Z$?4a-PFVIY^>1^ia%gO6-BS*u3@NIc91Wh0i=o2jF
za_@VkO2Tw}@rOv|wRz2cJ#ON4V6E6^^7~{F&47A4%i!@F>QM7r-~Tam8$ahoIAp{F
z#hr7e%<Y@M%ikZK+r&?l-&cV8_BCRN$opWpI7zHUX7X4f8cInc+NXg!<j>pg#aNHq
z=d^S0x`y=XB09Ki@Urz|ul&IWeD|;0qBgpP>W}*;eogg48*<qRJMALsjq?Zh)dU#E
z2&1;$D_P8>K4@2O!S2zY)^A<jj`UgU{dsY9oFHnqqj^1kOMj@hY###NcrSN*yH55h
zJMU?K5r>Gb$LG<g3gab}CdaI5-F6G@y!^Ibe6jfl&y`-PXf=s5iy2EVs&lVBaoRxI
za251DyNm;380xY#4dBmFfRxgcek?T#m-j6*Y+U29z8~L6D-U+PU(|G-O9mM{kHOz&
zIZtY*+QXW$+VCID!|VDaU$pr;fM6qGVF}xQSkqq}Wb)8LpPSpdq}5pJ!F~HX!hYQN
zs(4bm^Pk392N{Cq(-Uu(%ER?j-kBx8aCqgUBk?hW^k>1gkuKp1|6nd#PhtVzNss+>
zq>D%2K3%t8gvK`Cx0U<T<rEMm<MKQh>;14(acw$!D7#iN&KXZkPVf(RcQSEV#6ebX
zu<QjvL#=Tr8GlbfJVbQOO>-EG3v_54(^A}j1)lN<<e7skmYwG7y6GN&v*~wJ%boM0
zci6z`yJ3x+8|)pPSqmyqeuGfbsm8aUKXiRuC40X18rDO4wdk}g9sS~)o>W5in>j#z
zQMm+YZjEd22O|ZFv{rRPF-7IGN;4d{%I5baI?Gaf3X^gmjK%b+v<AF3n*SR3v2<+G
zwYhGcl;M|UKKa>qk72JK?pyEUUqU+NQH+(^DgF<x0(L;Y#Ir=dy)5L{J>f7Cy9=5t
z_5F!I4p(EF>>ElwKb;ri;Qp9=>7Bm1)xFy*G-ZBc&3*w>&jQG48E0fAqNi#W=~yxS
znDVjFaqDgJ{tw=0;~t=fY&3-WgSyU~Zm4WmVyhS)eD@%%gzdYfA6z#m<E_C?>(n2O
zQ~b4>)J?KU2*-8{dIzd4M<n}QxQJLfzqlH_{nm@6aKwa?4NJ#=u;(;(yh0k}t=Zcg
zW|ivv4fR&vv$Ab<`8#FL_4pv_)#1K8jPIsX{Zrg?y6)!wSglZNLMWoIsphr*YTt7j
zlS=_Mu4wZ~=f=JD0T2ZHGM^WiW5(?HMb$w#&ep>H+Vw_iZz}f<s^viKF<oEza+m8v
z2WA?pYo6xXB`85>*VFl`m+nf%$QxAeTeL&5EEsPcIUKzxm0Ry>Yg7KwMFJbrtqFML
zjGoIE6Plf^OB8Fk(5k;yOGD{f=iiAKCIfaU&})A-YGI2*>F~O;I+l^PCHxX;iYZ=l
zH#rLnzvdUNp1XtfWl-84JNf9?GKbFkPn#cUz{F>&y=`=4=#4wKr=`H#ze}kzr`u*V
z8|jr%{>P$J8alyXtRX^DYUJ>3IuZIe#21?;dRn^c^bV(Ebg)97%nNs+W5zM@c&)V_
zzupXL@bV4pmY++v=G2zb<jo|9b*<HJ3j@Gj$iHwnDPyD5d+E!Rk~y=~n3L-_$#;ur
zAa#w((cWVgGFd(&u0riPp8i%2QYri_K8NFG`rZuJ*K62SjdD)}RV<=eXX-&Oj@KzG
z{cNO@=5Pqs!6RvYnyZgAfJ({l*Ky7yHQ~0~XJ`9OTSgUS+w#_dvhJ#HxqPdO`EgzU
zZC|}fKIwf1RXJTgpJ$HY|3epZxhyFBvv49B+g)9ZqMY+9pO<E)khj<k@@U?m`TN^^
zjk`<ta$p<5?ZCs3NqkqU0(v(Zk85228^GfqMO=?wVdCTGZ}uIa=BBx6#(CAeSzw0=
z@^WK4gGthg4Lj_Q5$LuKgxl2I)!*O7>ePJ&A7v~$z1pY+kl?w<(5juv@9L+wi-X%{
zusSR4+IeBuxy5@f42g|X9-rQ#d5>5_Gm^5RfGW0sl;uR5HP`d^y|26|U#D<e_6OAx
zvD;WlyYt_<r1U#_Oz{niv_Af=JoVV2a-yDXXg*x$PW?4y4qK3Hl<JVe?*{RyOb)-L
zC6lHc+T0)K|KRcFuS-iF%L?V%<8q2eTc$l$UO3GlbM@2+$g)S&r}1(=-ybzoa*nIh
z<;wNrMZc;Rf72*OQ{{}VW1M+C74{kST~3}A6j(sYq<H*sJv#uHA7yCSa|!jZMKQdN
zlH>u^nHzuPjm}f}D9Q$5t>flWxs-^`dYLEhPnuYT=dQ6;;fp=>lJ?E~5y^v)Kh-vs
z2$@4KSWX(*xOYW7?p-~t!EVXK1h>&<n%$C@9WEu#9N#=0tU*!J8+1_p=tX4@bs;^P
zFFOfEJ@HFDMU(sLLI>+hlX*)No{zndo3eykiHDLyA@_sEwk7Gk*iOOvW5%t2uzR@`
z_4E2VJ)08U9GF6J|B$=tcP^vUZ+S8zonvdk{aSWb&C{;>9#}j+O`|LSSS;BfThcU^
zHfJN>M@w*H8(#6l#A^m3&Bx5&P56mF0E+*?>W|{L=d#_V5klN37xc^ec}FOji*&q0
z0ze!EpERC@wwX}fE`Gn%W`HMDhNlQ{XV&Nt2aZ{spoYC~XV%8B=MAcTM{7=LKrO@H
zbXm|5c$Qj*I`U-x*R#8D=kok-1YD=z=LQ-lOBDrbX>57LKQjJxn|g$_rjz~s2S;0k
z=cCH}d>$Rb{#hpDS4U!;P85dq$vACvDxX&a5z6C9qp~*s!GF~sDlf0lK%AD5O3Tyi
z-PD*3`t{PVaiK)fIxkFmFKzmbX;>?{gB3!r!ew&W;!FSVFs3c!mRviFT&vEyaAj5y
zqep4Xe6{f;)5J5nI?@JEOJ!{weDALjw=JJKV;ziY)w(Ra`srMcbD4kI^el|#TC-V^
zt7)B@Imhe7nf;2@_2{r@yEfmQ@X=Qcc<(y5f1OS94{q0?u3u_Aqcv$R2AT_YOKP+p
zFbv~eA%X73m&tQ5#7=x=5p;E~G#@Sw%$mYS=EK1Ed28bTX|sc+O9cNdojG5(>mRLW
zb)F?8!vv*`ET(IfpNzLsek*MU8hm|4Rtcc-y5V15V0)QjN$J<jdx(M3O@FjC>%Ph@
zpEie9!T~lej*vM&kkv?jhs?S*=G5#q*iLSg;4*kE-<p@Du*@Gv4=0-O5{Ac37k-}*
z>Rxd~z+Y0NQ$w56UND^%D!p+T=CPPGk)m)V8Mttz&nh3~d{mbec8uQNKY#Er{1-X+
z3p?b!ho5$ZJODZx%U@~o(-@4ijX#N;J<*G7ATH^xQo-&2!P5bJZeOUsL!<poQr~Ku
z+AGE_wog{}ZMtG51ADEI>uElpH~8ghtvW4P#Fo05wyOS$^9SZ?dcaTCl6(KP7d$uh
z(wA^m=CDwecm4L22&Fo}Fj<oHUpIQ5v({ahmHS}U$=7hubN#j4>F&>K_{M(bjilFX
z&0c5Y)cpfy^yC(Dw`_W@(5k%H-|zRKo<CGHT)Kbgbhw-SC0)hi_qqJ8w23R&`Ek~x
zmIhmsn|TcWi3{<0{S5$_t@UxDjp4_tmH-_#Q{gqji;Dcpu&!{rdCTpuZl9a(vO4Vq
z@BsiB_w^$`dS4p+-mFZ)BG@PF^+TQ6A27#qp*d^Qt)LfrqtL#H_r~6tRe`SG{cTI1
zJBX8iPTy1QE{?91J4q>>YLyJWbe9(n4ZluK37`~%y{)opKIz4=-3v4bYGKoquUtC<
z#scr*3>5fd7YH!eZ_!-$Ugz(6ayZ>jLCyG8*nM8|Mzlt@kPN}&)pZUt^U=kR)M4p-
zxi!W6rpJ62E8@eigDdS@9yV~bl8JX}k31AsL$aBev3!n!VPZGh+)RBL2yh?#`2!N(
z&*x}(K1}Otk1>W0ISOodY>jvC{ojhM6mv}fqZcYOlN$@NIWF$g*&delgbA(#)g+MT
zIyfq9YttjBw)s7;y7MvyYGrb~<;2+78Mo3J#h-PVMG1=E2X+2=KW;x{g${~m8!um(
z$1C7ta3VSSJ)NlWixbUV?XaM#$6JprffJlwXL64r4Jf9Gr!Z<71FzJbd|VaG<ZWix
zjR`xDPJ?;}SJr)3w;z8365k$Gce9m>y3vd)vMwIl3|Wzsk#Ry7*JBD5ldyF|Rr>DC
z7^>)ep714gfjC`wderf{<x>&c*tH&%0>H((Lfu(zGEFm@H{R?!-KfhJ?q@Z>c)zUw
zXih3!P6<~PN_Y*UFu<w>ZZieZZnd_$i)(?pj2eICA$R-Yy7EV)z+u=5t=9X>sEOO5
zWT*23?6vp(5X*teHZ<Q3pl+u|!u}Nv8&;dn_C+);XpUX%m!k^MlCpp&_!`lgXVk}v
z-f*8k-(`88Jwjyn*<`PKt?YNW1QPWjHFmk%C$?1u7d+rt+22X~{V`NwQ|{>B8+MV&
zE)u}1{lkdrZe(3-Ab#J?(MDP@(kG5NxO5F2jPzXr(N?MZ+D_g6;w_%oA!e;l##KGE
z_UoC^xUz7%=ridJ{Rgky%{hkt<f%9kLh1)So~$Xwqc8TV_nqk8sa@dX7hi8!xzt7I
zfZT?6aMlmIKn{3W)f3HqdiDLT`dS{SY`I&!c%=QFQHp>3g91(pt-XI-{ezE|leG2E
zSi{}8vu>k?S@oy2>#7jBSGzSGdC9n3z$G6<T6$JWt0xZcO_M)mx6yG4C>)cGF>CU@
zIR$Ncf5oNkJ?gjRyCrSm<?Cr&tsi+V0hYvUs2KZe(!i+r(;u*kSlINFC->TNdY7^C
zYNw0kBlafj_^J)}b#ra&1=)<>j}H(fhvEiekOHj_-et;PxwJtXDl<LIn<zM>JA^71
z#l-@El-eBgNx=O=X(VQ8V~ojjF}DU(nd@IeV9Po0Mr#n}a&bJ&n3Q3~&IntKw!*rg
zLnNl_n_&**N?BjLILRDf^R_S_g*|Zy6N}&}L?nX9Kv6VH1DWnZpEd?8oijucYA>=j
zmG<+HIp0-}bLcqBkhkRDD>Bp^pi}KSdmra$n=4knNG`i#CmKBhvgQ{0%6L|$AswY0
zFUC;X3ja*<Psj9s@UAi*TnfF^{C@h)g+(ECZ=4W3n0BVWMY{U^)*NHH&Xbq=7(Vv3
z<vw06YDleW;a8@4w_hqQO3R52t-Oz~b-uN2Y7p+w|7m)s;k?(CeFWxMt!-~>M#UX8
z3vUx^mqc+?b70r$Wsge=^GAtrFO0IG*%Qt6LrUg#PbH}4`*SJ+0vg3Ii5Oe#rJrwu
z^&{Ri-V>nTO4J_yE#>07OP2B(AXpOqU8bM05-18ZA-(sbuN6}B#+dtGGi%1H&#t!~
zr1NUE8W{wkE>C7oitle9n@>`Xyp?Lpb#aCZZm=Pj=ZWahzuHBZ5O?DEG3>zE<@FGZ
z%cJyk4eGJ&K9;-kZgkw-{t_|fStTo*=VNp7lj6r8U)L?Ht?DTU#EY&09~U(<aVLk5
zJLhaXVXS^`VRSdCmgh-y#P8gshqp1*S;ZOtZGkyPG#^t^ZTk!Ab*Xo&Z@Te1gdw`_
zD)@HvTRfAKJZMBfv;r20Ltl3$gO#^w|F1VZ%_&i@q+RbgU;XvJ98na4J}<RidBxqg
zfQbGhaE^$24Z!#ca(N4`B@fw=*FX5<WCQY0!CHx=e9UGkX3(qm4%WLW|MWM;=Vk0_
z?pVGmCMKc2=TJHB(rlHjzTyA2$WzC=efE5s_N*&4X)ab>b$x*WQd&R%%C$byj7VoY
zhF{T5Y~Ia#UI!cxuYiuj;b9k{N4{TIg#hc3=&9ufZo6E0*5s!_@0#$53yZR({Jbjv
zQp|fh?JG+6!;I?aQc5dEK|jE=^q+BqcCwCuzX_()D@v>E5qX7z?7gSfs#m@(5-D;1
zr+TjKez*$1ZJhq&Dz`+!H^t(Bxg%oNXk*9&)5pCZHg&J`^|P3EQ*aH<w4N3F{aE@3
zU+ynt>E%3HXF4~&#B+^>Kf<W8CH>0JYA9CYv85Qz+WliZCr6|c*|8U@7Qbr^t?r&~
z?4t7%AUh$CmL*9CbNcq&vHLq5Y}EapRe`6$f%>whx-%0&x!6MxG`;Q0(O0gOw$TLd
z{V{}HMujoejrKe8Z=qo0+ZSMsFVxSPd101KzIlchsqw+0=1txpkt{pXyM@I~bZEr=
z{kQr92(n%N2Okg;5l+9;y%cvFNbn)M!Um02*h|}x_{({=%`FdVO{PGjqMTYXZNH7*
z1*0|<FBnWE=YCiQJp?IxH)`lSd!JaOc$=UX?CKdEioxn#OVoexX$yqqil6a%ef5P?
z)7$G}MydLIb96k?ZLNPek+&WHp=!lpMlxT%n37K*MYp1+7qrRc+lW?&;2h09jG2!l
zi9Nns3P@L$7}+}r4*X1k^A2>MI_H}E3)1Lsf%)+lI%vGCKjOtrUe532G<Z1cXY$vf
z5BBl1oOOXmyF2agbdjwqhfj`@17gX%KT2m}4XfdBr#-X-vm>|whb%>_W;-5yN<*&u
z`nE^g&c+$$*FFSNfMJ)QOg_4mfrIuL*ZQ0EOs8@8Iy#g?H|eB}#Zu#omk_H>^(XEL
z+*NjFVK2m8^>Gh+q_EAoZ^vlWcfEu9{%?-GjLI)qeS=FQV=ImA>)kss__D5!cc{8q
z&wr=C&n#>5_g0-}&Qox6TW7F`>{HFx)|rQ_r}O;`><o1y)DFXSU%78<O?v}A3p@R_
z+0Nnuk{1Uslf#K(xPi|%;n8$m7{Ajq=~Q+ifr!&VywE+6ChekQU04u10$c@y!@@yH
zPQ<$dWG1SA$6ris^_M-ZFC^Bi@RDDD`u=>~t4ka{#ZDerZLs!<1;5fSUOB7YUxWK@
zT;=^_c%5RWyyqc=wL0p5_^o$JR?sNuzRa0884C%n(Z8z+*Fsva%<rloJTQ6_$!Pi-
z)-sZ$BkS+=EDv+BB(@ai2Aq+~NjEM#$4gG*N#1%R)tISa#Qql5wqq-t%qH+eutKz3
zG9L}o{>HVJYm}t4Ojac#F)hig_6GiQU+a5(rQf>v<glK14+?KIG_xz;T7e4^5ufE<
z+{KkgMv*e-oc$Y~j1NH;+|nI-8^1fpT;2UCVLX2{sLNkD@8_{U9=#+?X-xWTwYD#2
zBb$!JmvJmV<lmX$Y1;gZLQ~pZqzwJMVq^Lb(7kkrY`ZM$eOBMp_2F{29q-A6_BM^d
zqPo{%bkYODt8}!yvV%+5FMY0z?)uu)P=!2(A6xG??%~?+WnHc|%<nXgycuTjwTsR5
zs&j*40u+)ym8>zlShtpvR1Q7Tq<6nzt@cEb<H3har2FzDF$FF>LrLopcxD??EG-~s
zG9A<k_Ho_%mp0_QS^8QJ-yLc8X4YS9&xQ0<yN3eijQl-#V=_cuqcn=&UsO(!9iRLL
zl{l^4l@CX(K@KNXb~e7SUjRe5Mz#{I-rZlk$PKT1dHU_dPv76aN7aG&<la&QyC;Gg
z#@buxH0-l4NLXeo0o48RF|=`sbxV2uH)CbdI;-=c_WJ}+^<yW#{<zDQDg_^H$e
zJ3L}EbrLNk%oJ|z`qP@y)*L?geif>2FQNB(Y*~gNK7$F1|2^r`Oq58FY@?f)B1``1
zjy(O^#oDRYax#TL)?9^77jff{e&O;|Y}=(|i%&6tuh`XNQY@X{CkZcw<&nzd&N9!F
zGi(6;QTAOL{_^h1*2|yie0(b(#w_4sgQdysq}S|$GiRM@2*ceo)QRkPh_qxC=?PI&
zJ{WdOq3`DCC)M|Om)0J7;GETaqgO&zmhtXPZ`io=jZ;0|Jwg#udc0^8DB)}4akVC{
zz#NM^lzzNk+lLv7T#@qameEOJgCM)k&bKW*23&<bsq&9+!>qkAyFgz2HH4lvg%7NI
zf*gGZ$NoEloX<yNBI8{5)3Ku`0Pk9(?j88s+b>8FtcFxc(a2c;JXOL4(@0))2a)_|
z)|*6?9mvez=XJj^Ak8!~w9{p0m%_<LHa6a09jcMtQ~${RJ$sw6wqCS;gD1)*4dgia
zuD04MU~0523|N5qOC@<*F<Zao<FcpR{X|+|Hs7%!BY6_flcI2^s`mxa1f%D?TcA^X
zpi$0)kLOcuhrC@ygbbi0>?fOcXW1Ud^##;gLbrZY{`h$X1VtXufy_Y_EB&f#RqM56
zfQaGk6Gq===ht=3-DYrmAcjy`i$0IcXe`2RLgLXyL~ETh(>dO<yT9I}i|6N{M#K6(
zuR}B6X-zi070f6!Q&aJ6mTT7mm}9)33r_JKqDfYnSEEfn9n3Gk6B^Y@GaEP>!gw=L
zxAiSvb$&q*mHgk48PqrRfCeD<kzFQkR}53$7v!N{KBT=O+sIvUYV9v2_Of&NwR4xj
zdO@&#B(0P@M;<$4qe6W>M1OYQZo_!ANjutp&^;kJS0RgQ>*$<WA1NjPh)CUyY8re?
zthYaZ)Mzk0Z7P9u)jnfack4Opa*W_?RjRH?fW6+ph!H)oNm?c}8R{Z=qCW4aTSF?$
z_2i!T2=KOQWl&WGJ>6&Nn+-YNE}jro05AAGY1Gn;G(a?+w7OFF5{_f<CvEW#oqz*t
zY>XB{k)41%%p&c{uYOc17Qj+rc{!+@IQRQ?B+=Egnfbx~3|^*Mx*N=&Pk5B*&b5%y
zk0Wh;4^aNgJ+S-l&OJBPW1HH6(S5ab{s->C+JxwXsa$ppaI9*F>($AT3hnV-dh1Hi
z_gaJ1V#@4G!`l4(>sL1WxK--hsG!s+fJyg*^>ZbB%&pfY)F-=yN=e`0vHr0~zZYJ6
z>0oX$TshNbO)R@Xt5rGwrzg{Aa)&LB<nCq4YN`&eV1N2+zr5orz~f2^k__QF|Mu!m
zB>c{sWSDh4=`&6rGBDn=?x#{p2tp~b-oPQ+bY8PgPTAGsJ|bQ}vp=*v_7uSQx_{^~
z7LQLsD-)xcgB}i>-GkL{Mx<t`2%;N$KGEh)Y|#so(t@fzaB+6HB#+p|t~8<)B4qma
z5zen9>)7lYyCH{aZFYV&uycD>jTWaR6as~$ISC~!Z2yJjTRSeWX=ln7$1&WkoC<5a
z99Uv4BEv2~D+a;hUo5!hwaL*Q^s~{VOO1*ev>YPpvXC=N=_l)IMg1<T#HLhzZSRLu
zHAkQlcw^ONXm9NVUOvmj_1Uex9qQ}2V_rXywJ&Lw-h0}XqCMTEHe=3mr_H7SvTtgj
zui9^rH)IFrQ9tRj;(r;inj{$li<YS|TgP64Ke^A8nsW!*#fg;2+e$ZgLQ-V%1F8nw
zJ86v`39y4pTWA006*$!+yXvLAzf$!b(hT(1>9A1t1ZYY56T8i+IJ@G!!`5gLJ6BsM
z^8=w5v>u})2HBh6IRY}whe`61ig$lDp0s9@>6Kd#Cs0>)Ci@z4i^`MjCDnl2E{ZG6
zde!qy39V>&XSU@|z%ZS3^c{f)mjHiWpuO^2TJ_q#2OQ}%apudV=6?GnvDN@i;)<=h
zLDp7?=VmfAb8d4b(D3LtmJAQqKcNYlN@xR9+aW5S%IM$+sPO9DyWOSsO{1sp&%}K{
zH>>zZveo!%V{MlnL~D`XCmLBU;nUA1+5UseNPVswtLF;b8#?+f6XW><_YkgP3Ce1#
zMQfm-9W$C8i-s!ncO5t8%FOqtLkDB*lf`g;4urqTmeCvOU!Ms^o3=0FgqSNHv{bzf
z5C%_Gcnw@0<5ONf!p|pFh6B+VtJ6|L`aZ*E#8Z9Ev2TY$ZmtY89K2qmBXeu=Z1Zmr
zS2z!rz>9A`S0HV{1*?v^t%up{yU-S^?HqaQ>p60Y4vULM?7+B`i)44)QV@g~3BvoY
zHQ7wNZQ!4;n`4G4j$FMh6Aab;mdxZ*wvq({()ame--$iHA6w%Qb3C9`C?1p$ma3j)
zq&3=A)6Z&#)gu6QU<e0utP-+*1Cj@vc&IZ8+gz6C>+zP@e>$bhc`|<)nco)vgp%=_
zv?!-Zg;Pg(ZW8$mb*BBfC}~#O)7nuC|E@KOAc+B>%VBL%YfU<@M|0fTpJkvbaGzs>
z9zR+cuOwl9ud1C?VoeS5aA|fNWK0Bg_%?;VI}68JAd4_-$Kz*o<oQyKuj7?IX8yWa
z*ggA?Rnur1Gdme6@J(LXl`f69&lMIofi@m&Sg*~jh}LBymFwsI92Gwa)^Mik>Tg~7
zw8JO9ZWdA8c*~Ox!OeOEf2`R^s@v6EIT#aTJ6kqD2ER>Pr*s==&zXCDw4NQ^p-MT3
z6Z7r@WJv0|sj9F(@a~iFc1}T(WqK<y*Y>V)wjR2(kLg9fL@YU;{<HFr<lt*J>~DMH
zOF%bV)5N+x@=5=23(d-*a0Z_zylu-Vj6pz&A4>Pb0}ZfcWGKfcPwpEc?cI+h{L5*#
z6==Uk*TL!+w%EnJ|0w#*=_TG8iM0;!HYw0co8}sa5L;vkkcE#0S~W-0<6|%c<UcHD
z&Q?E)8B)V;$|EmW;J&#lV8tK3NBfGXIa^{NthEvBQy1h?&^}M(-5rA}(kcPzGK=VJ
zIIh7Rg1g(i3k_fTCF8gh+1@$y0g!e3)O$>iwLe>Xe<ir{qA0jlEKR^(pOqJM1LmZU
z*7{(cSH4&Hd*iRYzIy8z?(N(fTn+j;18y7}h%h^+gAx!xtgXCs4p@*9Zj_jNTLH})
zujiJV{M>GA0Y<slYjqFrzOvAbDxep`=H>GfPwP(WGwcPZeQTfh((=Hrw4Ps9_&b&t
z07fkMMwMJLZEYn8)oMIp%g3E)t;Kh{@;>q5XnEe3(7*&IAt*PrQ}>gkBp*P2C;Bcq
z;P1b{EB-9pZ+<!Br`PEMZkBAVVJ~acZug}-xeZt3z4)s|NY7C6<!N2NDbc(=r@D!l
zwKLzXFaBEoJv``BVt4X#k}lS?=U<D??~QBXprck1@GMWU7YEH$UU=lRL~H9Py7hA5
z)<86I>FT14R#z==qL~8Sksl#`p50$82ue?a#L}9z?k67n{n#clgJ+P5SwJw$ie5zk
z`l3Jko;#dZ0EHeThc72%mfud_+eF<=N|(5z(!&`%?NGh`0F)k=yl4Ulr=KRP-k<7f
zk15yPV}3OF?U>z#*v<<joT=<ge~+<4A9`(0Eg=!+y#>DF-1nzJZ$wZlFB2&G48__S
znQy9-pxmAekQI%R9hh6CCTmitEAWp0OxJAoKx&grKbrMH!rx+VGEE<+evL>=OBO2D
zA~GHEFu27hsn(yR`>#kg-~O$CEvcYZ+WqWLwl3>3@*BI5)MMgy0^8#Q>AwLHyO!<G
z<J&zq)Ka{u-fZG^J0VY-H2o7vPU5ZF@wXzI2*2N)@^;T?c2b=&iqgUA&HeWCP<r;B
zKu?}7I@lI{9;aNZjZ^llq3_p}2H&5(ak!jU&-aCGJ<!u|q_q&C@(}-|xiA5iLk13;
z&3`py7*}r|vH_tO+2KR8Pa!wUIUy_7)a^#a5bDTZAFN7n{R6e!SHVemD?`hV-YXlF
zTB}#jap2=)Qw`UB!8>N<UC=Ra+A2Jj#vMc&HUHRhQ<k^ZhN8M1?Y%3HRQOP<Diw;l
z9Xf^T2v_ixcv#QQpzdSHDEidz#O${ecNAd3^Oz`3OTMC?v*{&m2(4IM<~a0t9r|M?
z9ak3@$32X;Qur7>Dt>1?smZH!{F;N*GH!HxyuJ)edneesTQ<A?I_v2Y=rHn-ob^iz
z*=~$SaQOxB0KK)?MKT$j7TPs<$;ZxAQ#2)(l`-qbe}o+89n*yx^UiZvi^1+X?EU(S
zhY?rjWv05m9;pd=6;$~qEjswIu{RCiyr0Z$B~laUToGH<DBR`p9fXxfTdF_~8#OVM
zxL!Zq%e!vJj-xSj7)g5LhY#KrH`YP=!TVJXo1fP{AdEEmQSgtY<IXu{MS59dM(&7}
z>IA6!St->j75HdxRo7-p2dInonf%-#wX}1K53}2(^<sW*HQ2oSHMVwC_no`66dzwm
znm+2yIi9ip1vKPHnxVbEx!L)?yMFa!OJT69#eNkj{XjY$U2dv>3s=V3-k5LJW})4A
zfVkY<+HPyRh1d96e;e>8a&gHsPfpzwx6{k#H$5;z;e9@H)K>cD^{}X=4UP*fZMz*!
zf5XZ5kweZNYol+2B>%zpN4ML`>Zy&Wuljc&P0JMaV&t29?%uobY1EPzKH43Ct6;t{
zlD0aV%VK#2$?s5+BG6o4?$?LnN<rs4grunL<TUw{NDtx1RqO;Tge>Lg4@h*c<maZ(
zzEu(_q(@7UX^RMGTeW(oV+^IBmiK~SvftxkKKZ2O)n|K=8|_+v3h&v6?lxngwfM-k
zt?QTK340GC`o)hH6lTttZh(|{y_H6Qz3Sb{{JC4;y-Kr`fEZB!I9{PUt3BOJyo!lP
zjmse{p=ou(uG^HQ!d+yODdpfj-yqwlOWbx(c=`UBF|!4e=kgtkiBsKn>Du~6T+nwv
z9`iOxLNd^;ZXSmFW&d*jh9Fwj^`{@Q>YbI!mRHiVmiOS63$=VV*AI$4s>~5zJ}vR>
z;Oz3fv`(D+qwv&O@d|O_Kr8nBB<C$>N$l`>$I|~U4{8e3(NY8Yz-#Rhc%-);^lHdp
z*Ab_(szbH3nT_0u+<rsm;5;-E&~{5RY9F9P3teWPJ>gy_-esZx4mnO{PU~L1BFoF|
zY7HWAx6J)cv3ynMlRgA={)e-)yO)i<IHSvX&t2Rm5C^DElC||OG`Vtgtyg)hZon3s
zR~B@Vqr$64oQ{{{9pl@M&g_gYfA)4#V!@Yw`8ou9%*RWH-&XG}cx-c=Q-HnJktSD(
z=8eW-{z2e03%yiK*U=m3SlWj+E~_24GrRU-mr{paC}um@dOR;ShN$gEQ8RmEX>^Bv
z%B7^oN)`G8OKci&*3T4cyT-Z;YoNq|9i}_pICl=6t+{Qr?4H>S`^@9%miV$amq)o$
ztYdv}|5VEX`|!uS&-~twSVFKI9~j^6Oo!EEHtVfc6WupogY<fmL}^31GgD3gou>v&
z6)FKm@zsvczc#+$W=#`l(TF20z+!pLz3r2q@4CPlt)cb0Fq|my&N{V+!CNaToq4ab
zxvJ0kp<VOKz?;NMwQ|T+?M)uo;h;oQpY!JW6u!awudk=zQ;MxszML4MQ*cg6+?iR%
zG%yc{7r(<@Z~rCFkRsY&ag&;p$uJhqUh_8uT`3NGlWrd(uTO*eI}h0HZ}aprdf2Wl
zNWs5q;)7(_M|RqN)<Cr$xoH9v6MOl=V>lR)Ly@EFwi;FAVDO;ixR;weLZu6NE=5`$
zN<R4b<s+YX*cfw4L*5+K>{Q0#=cko&$dqZQ3K69<ihn-SfztYOmIVRwmaRI3kL9Cm
zI2GT==la&h&~A+$FjjqiU>Ebgd8}S$^g^s4gXsD@0Fm>Wm&*aN)$XO|t&0zhjVy-v
zJi9deOQkx|vOj@^Du@(-jQ8fm<X3>kGkCu}PfXrxK>EZtZucKz)2!63AL16PDCmvw
zeex6C8M_<Q=9X|?0`puQpue|6*716O^4wpHDJkB$UY<7%cm7fWmUJc^(q9}dwHI>h
z12jHigZi#>U2Y<_T&q2V_<0MqQQ+(KN+;;eUMPlu5F$DBK~&`+KSxE@>jERV9onEN
z>D9ihvTR#h57e$>A|9G;ZXb8XBgbDeHR*9(J*e~&Xnn-z0KvlkdC~A~M-8;*;&|>U
zJN<JuOtV&yzkY-hbs5KV(_z#bQki<YM+K34OVBS#_wSZgY~PPchVpB<oN?c|Ht-JB
zXLD8GsImEnwonD&v01+yE{~-c0x~oE4nP6To(snLs{<ShMR3XfO>xLkjyO&^^H*_9
zC)IVk3{Klo&zBm1>23~~(*(gdG{Zqo_NX0#iCHcyGJ68@VFW0yvH?{LDEP0x6{I2C
z>$#*I+nn2KSn60ZCJEd2S~7dd!s<~KFd}~rrtulR%A4h1wOMp?C&kxSWV~(iPR^!G
zo2WjLBVFTf%=ReGyd2r;*E?dzpv&e_jV$+6I>cszLIFApw^(P9TwMR80xitF7%mht
zi^7?G4vN}=*7fBaPTaS5?1G-53h<^mZ(ImM+~n2_g$+}?dS87DN6yR*J;A#Mdl`e7
z+{fhI=&lR?9g~JAF@ZN}W114+_!nWnsd1C~szyL>3&W^=<)I8mDu~pl%X6E&9==m9
zL_v$PBTRPYFG;Xt0YN>sIx4w;^#<Z=Qa2Ne{k;yJWfGgS@Rtj_dQp*2uhN{^(S^H%
zD2uuBSj522u!$DEpq6m+8}o{{dmw>Q({|getQMbWvFR-bkFs^_{>2npI}kt-{=6a)
z|K0Lc6+&U!*1*~?3&{S%{+$I52mNHr7HGb<h1TzdT$kf%xkkey1A}H(PB?We{a)qC
z(AK+U5aJ<L-JyeFYsal~b=2Dq_;Rl@G|JcU*@<q~b5`o$hZ@XNfWIjHYuW@ID0Kf5
zaN=ZtKAf4XR7kJ0bl&s$oh2*l4)Yu*-<tY8oyFS?<elJqn<%O~1c<-y20!pt#7H@o
zEW180_J&+G#PJs$-+GB4)~=TaK;v(@Y$pLrOq(;BR~gOUIO@Am*gYWSRhs_(db?XW
zo)EVRdClX9Xs(&7RvY*2+TGWGugrC?{K)F$xnRV>-5E76_1eN7<mfL^1zbk*6#>S@
zHlB=f-27#I1XwcUZWi80`YdZ)JwDiWkX(A7udR+mWT=K)7kJRLE~D4XehwpCt#ta2
z!_x>y(LF7}g`(xu+Iy4-`^7Afv|UO@hL?+T;3g#VEi<HQEHgfhz3v;dW`w>eY3su_
zhUvmH2Rr|KYPCRv*<vN0S0F9YM_7sMAnmdE_%%<{M{<w*{Q!PFD63PENd0$SM^I&I
z+tN`PigxD<vI?6q#xp)RUj@?WWX`02?6HsQZj3eAB-rNAW&W=0lr!8WE}(7hxdC9?
zc)N(Q2u6QP^w!YgH;5|@5oq7q<FDWAc-5|Ld1!alyyVXIigxEfMUH!g)m(fBH6N=g
zT&1yMeRgI(+JiP5t{PaO4!Khphf>*IT*q9cP}PmkbP1?ouD9{3^>a%Q7Td)*D#&DW
zeytMn1mG5WK)ha1*E#(a!vK%v_p@fq<8UN&<3=AH=x>mc{=EYUfDu-;j^A1Jzz-Dv
zv&0>MCQ?Z5A~tmbr!5>`QxXYoYn50)Pa{CZ!Y!4sDY(Jc)EcY9rPWWnIi*M@(E0rl
z+BP=EUS*;cR3ZZ*xE5>mAUv*%)f)otT3@8}vAFUt+{LSh=h8KDg>%_DkM32kAP4B^
zMl)Fz8+_w87xer`q2;#b^&g(Et?=$`taL%P=lmR1{FYe;hZh_bt0~N9&yVgsUS4vp
z9x_8v;>EkRyG}q>WO6eW7w$d?zP;^b)Oy$>NkHMAc<&jb<M;PW%f*fBQ*|Q)E#YL=
zL6}Vz<_87Tmw@RsBBS%`Z^qL#W_q2In20^-@@iLHQw{3<9|tU(v~<KV#VCIEi@wLd
zeD1L}Q6S&i8uT%8z>CHg@XQLoi`(jN^un}FDhB`m-Mp-+0Kr;o7vlYTqR#*SU7oz6
zk~RV2uRMCLX%XvntKdh<a1Ol@aNfUfkcy%tkkhe+_b2IhPF4hC%B&w|zYg8--f3$%
zY(KSy8i<Qa^K4YY8rb<43&i*g!_4Q#*-k3Ij{0)gk}pn2bJv+ks^wO#HM|qV;XQ@i
z#i9m6@GpEM{P(x3d1qFTM7bhAs#WSl-(=&rtSpF?JRUtB7jg=P_ktYX{?n6tt8{SK
zE3QYN@jR#iRxjdg7TsQ3Nnd!qhu|*M!k}da-(k`|f^F#_-+Rn#`Gg`g-|Y?|I7OnY
zuJ|d%?Kxt4Rk@fhjV0T;{iJqwTVkNTT(re3dqP{f?`q5TZC@oCl3n0ic3O)Wf4ys0
z<Y`KxI<#7Y4m}@w{;b`je0nwi+K-E^n-fDTyWQFJ?ZcFKU@~IVf2-Yb{w(+Xaeohl
zt{Qlj?UY$G59sM2lhJ|0jDh?03A3LHhn~XWBpDIA>+49}`cmzQ5d;4FoRyh;9G*1!
zwXGW(`gnxIDr?W6L6V5?>-qk8D0g-}+c(huh*zFY2e>@>h`R44mcJ7&$zj_)tVxJU
z<VmY~R)y}=ueGeoI56vYE6iajYYU^Q&^oS;I4AMV)up|{(wxchbL?D?b2l;C*FAo5
zpKUoB>@Jva+o^XR@XBJ|)a4*0cO(~+H>cHKejex`+I?sWWI#sm149m{Oe~bSV=44N
zFY_Jr+pXjFr5~zgYIE$IyZoZ+f4KeUe8$&VQTcP+kKY9?^}3srqk8rS)KLe-M`mYd
z@C6MntsfStm~0#Fo<QC}!xFcQQ9ru;pS`C7lyivrwa-<L7S}w+m!EE*9>eN0aiit<
z^OcCMcLS$MNdEcNJ6(I`{qEmESP3+tfg~ikZWohgSa%!561x))f;WUSEYAmW|MC4~
zyG>qybtO&O{+!|a^K5UL%UN1mq|;Ki<H*?28sgDX(%+Lr6ww`5Bh0Dre_POL1QfKb
z8o&PbK<(KBGDUOb-*!xDhY2%m&sSFx&Ls>VsF-{AsCRVe<JZnZhp$5jX0rDR2K@Ik
zT(P|FdYN;+-?|SFz(rUSEAJj|^p~cPe~zo_N&h}9d;=6kf)=Dwwp<q1>oOxDyM-|l
zQ5#2=IEg@)`}Ohtk2zKzPt`pOs}V|1D!-#no*P@2W$*jV_f^;aN8Y<FtLk)lqF;1$
z?7r%Yy5Bd5sEFVJQ9u;&go1cL5YH%{&w{$YyM0}+P_f^jUZGy0F7^x5E7U9W9@c6@
z=Uj8H|EmA@bwo$(T;a-OoH8dOkeOrr#%2MoGL2<o*<1-nK6DwDPJ3S*!HaQY9;a)t
z2D=a2Tqk6W8Sq0}Zm67|69<k1Tddo93EZT}Ynj@IH(Gez_3CwJFUW);)hBixo66Zk
z4R$CGYuYPC?46!%h1cSu%uS06><IfP<-WMPpwUHf4s)?xES75*3rMAe=Z=fKp){3x
z*SJr*QHNV|*E%7Z1Ny8*eOza)hk1LnrkaZjb-CpMCS{!v16QRqE(u<O2*(4VI=fm>
z4BqvsXnLmJaB>n!fG?c88rQcgu3u=+Df(VC0wZ{0IpL*LiLqm5G%M$#RL$s2``FmV
zM!Xb?A6GeMS?-Jrp?sOcNZz*rC>E>e)mJgx76>u6$cH38-a{9b<B#{f>J4_RNY@5`
z<Mh&x3&Z|l?%b5<jKYtZCP%O_K`P!BE?v(KH%+vW#0&Kx(Tn2b2sR0+H4)PzrsYP6
z`W(FSig=1N4)&;Z8xLE<6{2-Q$xGa|Jy?Z{w-LgfR?(10QB&~R!^%oC=PlASIq=s~
zB;4Cp{>Aw~Z2GcUB{J2i0&C*(LR-%*zwJ$rb<R6Xz*!={%^WP*PUPTqonQlgyGxH|
zG2fXdI^KWBR^llcL$3+K^=Vzbg%_sgxYP?)tipw(hKUNjFk?%q=82;0`KqVIDH`0`
z(OWK(^f?)oH<@<6ys0!|l-+OC`<b&Cu11fZxXi01F*A#DYoZJLVy-<`TGG5n)bWIB
z?w65EsW`7qW}+VB>3k*=0SBW2mpv~Li<l&DfO0pO&F-r}7Qb$@#FUK=PiBCdnjs@H
z<XvuLrsO6H!SOR<cy3Bzs$eGJ8siRqnqE#!r3%u;MlDZ`?|pJ#pht&|+w1$mhpdXR
z0~@)Y&2=H8IMW;~4oSySaGr@q%t0kn3d5?>P>#8Wg-<O+P2S@dqw9{$MZNZE*1GRt
zrMH>9)Qih?JW)7RPmYvu9aJBtxm?#DxHq$~(MzpiJ1N|p4k20{G25-QZ(FRaq;AJe
z@0Un*w-v(t@!T~e61MP(;chO?b(m|Hbvd31+0)A<2Wv`XaNoTSxNX=tSMUpu!=|}Z
z?`3C1plmA@ZQM-tqf80Mi&K82_xmtm7NhswVm+Q8CLP;yn)v`alDXdDqz=ZgXjmzy
z(|2#yu`3y)<glAl#)EhM>1jfBj#4T-nJwCzTqn9)2&sa53d~C5h9VM&Mc?c8w3r-m
z{dlrYlk#K1s93HJxA<&@-dE*vbbd@+d&8`+klv1vq7$I~Q|ee+5z|Yya}9^!DTZCH
zR#Z9g(jdR)V}_`vM&WflAFSr1r2}S2SQ$OvXXZZKJ}RMl9B{az-hDAtdPG^LX90*K
zIk8qVdZsltd6eru_2^u2|6<y`8}-ZRGEdwWkibt(Ct(A?6WRo@WO=n+Yx|7Ua?LPP
zi_iN;fNUT5uzTD@g5?rIx1{NzIB4b*80CzTC(Bx$7h5Sx*ET0|ChP;EFdsp*jTR5H
zNM3fhBh`z*%z}~#Ld?+fq8p<ReZb8z6Y~<8RoN5#X2kZ)%XOFW<!<jrVr73VJ*zFd
zv29(7<crDDBu*c@-32%(BuA};Z)B~G{;7qqf*V~rat{C_%GH}eLc~zL7awy+6B(@M
zlCRhnIfpB)`FkR=Q}<2&0udyh$Uz8v3B`)o67{shW`C6(XTz-f$7P_uNSOQh^t|jz
z@X%YIX7NU)H!Altu>m-1KwKvP_qgz;G!CD5{kAsr^Qr>NMH`hrO~FC4wGld#K#wVP
z@hmoFrX8g-FI3Bxw^-gVv5k0mYj6rNn3dWX;DTdRvEAIkmJo9!=frq777p2+P&qyg
z`qS`yDHP<C3$O~1eJwf<ayi%6NRP1yaq5)1bE-C9F_A;M%dIXW1tXj3gdCQYMSsfk
z;H+LS&La5RjD!0TZ-+VX0vrcfoGy1@A%NJ6+%ljC6=ML;N^eguiu$@$$l_E!&Kzc{
z)LjlL{B1{#`vzU@R<AB|judbrQNs>>wCjeCRCvkhf?1>Xi==JnJ-=^J7>;873asZD
zI<*k|iEL)X=#pIb3`Bx!EDllFQ3e4o3b#q7iGpx$`g7ZGA$9PoIldV*hZ@rg5WNzz
zUo{uh+6B+f+^W&e4ikyxB$VQl;q-7?jf%l>b;}3*vv9iM)#gi*3s*hUwv6Ct0e6^m
zyi@V??4U7Y<#@U)-SCY;&zLOuzh!Xva>g0Maoq6)-18HA@)jonM`noBBZHO4H~5;I
zJ#8GOVvmb8IH_hU(1;$at`})$Ib{dnDN)jbH`uLKm|Js2Xs%$N=(Ly@CIta-Qa9I0
z)*S0=KQ*!rJ(t^MEY!%lx+{hbh%0h!={}MUh-k`%Tm9g<C|b`r&UH&$g#us|3B6-v
zJ&CgA@o_Q(FM_tObITPNiny<_em+hs&6ePSgS<W-y1{9GiDgBKt%}!!bzj%ihK>Yg
ztEn0D+DdK^lpDQ^$W1%tAs*Z-wM3mM)aLW1hvr(1SS`rKh2Ct;iSVX$jN5C{fPoWZ
zdoyO*@KR7ev=v`$1(QI`DzGH6$}|gQJ{6yC>oL01?clO<r4m+s8r(;G8ZMmi{?KS5
zbwu_c+KlOyOAwZ~a1%O}Fr7gTz85te-0!trUS5&mQ9e02Tl2}5>jY*Rgr=EUZn&8f
z>u6;V7^@LIvUdFy{(k5qv$HOpH~rGZo7ht`JN634px|DMIK6}oS~PfWMcCP$2yQzr
z0#O6mUA@Q-kC$RER~;LfOnC;bSg~Cjk6e$}?K0h8<VpbLQ%R<Zn<<@a9XKO(hoCR!
zEOC<A?+%BY8mWcjlk90<oN)FfyGukj5G3x7npS$a3zl2(w>TMA->#DI=)}VbGUW0L
zRKkKetBglW`ME)qcb(>tnC>?Rw6NXZT5WI1GHtG=`02C}io^ayE{%ZqrV=tlfyqs}
zy4Okf>$;NL5_mcoaA^VN$nktVt8eNl0AH~)K`mj_&aEs#gt2bqoTC#hE{8;O(JB+m
zs>j0des6ZR7d5cVgf@7EgS%?*=rBmDd25b_-C1QrC!-FX6jQW0SS=ftIxQj!%=qwY
z7VVvzvHXH<8M9fURphUM2u+UWm}VG}+0GZK6uY$?;TO&NvZmFF5dnO<m$RGdqoy@O
z%vB@gHgF#f8XT&%ch!Prd04(5i|Ex^_0-$`2l|}5O$Ln`x2iINrv_n#h$*x4W{@g3
zORaeqT>g9~0CcPsh++hZ@9&*pPArjaR88gvrMNk+4YQ%vX@9O|z)jTBGSht{?<=^M
zVLVydH|-;OydU5WlUg-TVTi*RqmCY=qqWR>OH?~yod9=)QDf3~^S;W(3;O3WByJ<x
zmJ(25_cvlhb+<*%(!nWLY)-EZ89Oybb$gaanz-F>@9LQeU6E>&X>eNDf<MflvIO`_
zpQW5;J~c|H<R*s}W!ma5=*NrVJWM(vA=J+m=iVSV-U9M90Jy~rJ(n9+4zT`D*pi|y
zZJT24{yCYlX>A>44WU;kNB4cigDn|Y8xPbe)Ii!!o>`_6B{CE8U&8^|du;68W(D5f
z>{@@^&pM?;Nk5qC;_5}^orj$Rv%AyA^w_Ll;2OukA_jOdY#@=zCA`k9Q|l_ck>*7M
zZ?hGQhq>4^o-~ncD{HWoVrsJO-s>Zs>-yboy;`mfCrCrfB-)ED4zcR-{=6IB%JzE1
zMka+4xc~O8^3s1x)2(!Fw=Sdr>M?rF@R`+eeCLwYo{Q8XR}|KiR<szY7u$I?D4Ude
zz)C#)^n>Og9`+qoVa8p{V<f#Z_$|>tdDTN=-_ktrXXqXyeP2N02yfD9u{~s*=+Cwb
z`Je~;<I$vMqmwCM1`OS3@-zg$K19rs@$euV&hKk8;-q8;+0AB}casgh*UHuVa85$y
zMJcwMxus$#Rmk<%?Q0`m@>ZMZSSv}naVLNW=d4%_@AqZFoE4^W&&ZyV!y2Xbj^i_O
zggNrEPh<HB?Dm2cDceVvnFbz^v{j1Tbt~brZ$jSTA#=B69d<oLZ*SlB7-df-DYf&>
z66FZP*4a!sbg2Xw`o{W7c5rF?_Gb*etbO<TE*n%&M_BC%!9s~|+bl$3W~&{fYuCS>
zQsG2`ICRoY^gQ)(+XF<<wIV&mzk^r)n5s9yscI`k&S(x#PE?39OGftb2u{IlzauTt
zEr-s-JD%*0?%7SFUjQ!xsdg?Oir27%NbqKi<&!K?K#+jZKlM7dmZJwwb$$<EEiqe_
z4x4ak?@{Y$Iu|oWHpFYUQ+ug%mDp@K7(~W1KAr5gRI@Q6(qW4~U6uJVA8NxjHgeB1
zW)h7Qxaz&3ceQ?^L|cKlziy?Rn`_{;!^)rR+TgotCcAyNo}arDm}rWmlfsg)@;JZX
zof|GsPjy4uT8K#1J#RKY<(8Q+BP0f~nBa@S{(c09{p`!M=Go{hjVV=MAN+w_oy;du
zfzfmyBkXrYET-K?CG7-2MzRg7;ML<5z>eYJ6~C3%a$$ebO7tugzk@gUH9)A9`4~&=
z#8tYD6jTo4_x+Jntj4mi7uA#+EdXocXnZ8~_ky_R+<b}`<oRV>QzOA(9&6WkZdxD?
zUA)_0H34%Z=5M4JcT{1iNo=YFopmHNXrlK-vpi}yin5@M?ISjVCo+Vvx6#ZcGw?St
z=}uW$de8D+RQFe}Qzq27i+HmVn$naorpAZtRmkr#V%$^X!e|-N=82IvkS?<uM+Xq~
zqFPmrfo-K2qjUh-r>V2VK#puTaK<2ZtKHl505ywbl-fn(NpavVVhYaXe4Aonujr+7
zY6_4w+NL2IjBth^#Y#+dVtBfro?Yz8e1J<bIN0`6X>JQE8}gv%wB`ct!IXW^-ihmD
z)w&~N%~EcEEUSC2eRqb=tRZntad6)FS31BE4;QgKrM5{*;(Wtp04C<<rn)KjU45nH
z_S%w32%$(;RDvRJ%*ZB*_l9Aj$0q!V_#hnNtE(YAk^3E4o+ipEA4;Z_eY0&<I05y_
zp$>Hj^&J0fk4~3FFg9;HRj)S_lnP%WLLyxYX0k;3!rw`7F+0SMXK>^|(C~GWjO}x+
z!vMlw+>2MBgjA50zz?=60!CvQ^(=g0?o!D5Bq^h8%}`p4JOF>x<JR~z^c{M}b(LG?
zdR!ruBDRq@C(I90l~4!4-cUrzjN3ZS%L6PCpDD&pIR%Co>|BYJk*y5-fOKR_EoYp+
zUq;4!9356R=UOZ-_NPlTdF80dB9QmwWd+A>9C$A9*`p8&hU=6Xof%_;8ZzbJZd^;v
z8}c2OhKI0XHCL^?9J9_4?hV*Vr<Sx~M7WQ+_+Fj%Iwhf$Tl9xqx#zoSB_31ckbX}$
z!sBy^PG4zRPV^T0fLV@Y=?pU8pi6Iop3n75X0@VOcxe(nzc4V?k?R2;Os}PxbJ^h{
zASaxHR~3FQ*~!rKT`seb%OrC_-j)R^TT1Z4$`;1Ui~#$;J=o}2(#UG$3{SqTo!a}x
zY8lxD4+E)}Rk?K4p$1j?q79aM!5!{%L*&vOEqcpscyCEom1}~pLeCpyny1k&#KhH$
zOPblExE2r6b^~yZ+(E5nm}GNu%c@~mGt~T{MJ8gEjy0p1;KQp%%<Zo84JFMvZugMQ
z_z$;yrzOXFgPED1SA|r04Ko=Lo??Jol?%7|%qcoLZ;X6gGIz(&#EZMtRzb@6XR;MG
z3a4g%GSLsIxO^BEGs|LFOh)c2agY+b$D>8hT_uENt&LXj@B6nVU~VTuv)Rx&bo8tl
z@L*=KL&;dZQ1CC5HsCBDWwfsJR(F^#HDSwl$7lwCRUI~y1QJH(X~I_2Lt*EO`_)sF
zugjHSNgjm@k*47s*Vpu-%$PY0iQi6ms(RJ@4Xy~V6KB}5(pfCG!O(5_RI3K{WLdp#
zN;2P`r9JA7w+o69E{4Rdzc2aH<#aTHv|0$G8d}7jblRi4V(|-dp{;V)BzcfaQ+997
z@4k=#uypspqDPfHQx1T42gG`f3RhSsJkDZAU)3e<EZ6iQ;d^{JC1bm5wTw>(2`<CT
z52G?Y4EAJtN6FO!soeuB(M~OD(=ri+Mb1MndTs3EF0Q0+N%=PA@cVgCm`B~j8Gifb
zb;X=gZg$g8pEUF0i`%tbwj`#~LqM?1b>=tZybdW^^rFQ{t9ox<%IT{gn}(Wn{*Yjh
z^I5>zR(>Omvi??rD*-%4FAa;I%BVZ@r^~g}-UjcE)k+Q`?JQGcLwMOp7wo<^W(vi5
zKgK$h4nrFFMF|Y*;9HpXX92*>CuZ)2UC!HYt!y=vJtKN`3*m&-8oQ&Vd#;prkJ2pC
z@SF3|Y|zWQy;0H+$SvbaNrQdRe8z~DYF&Mf5R}7K$I;6z7Bz$Tz13P?NC-uz5sN41
zy?ANS;IHIy#}GoT*XKI%QoGbmRS+i^b<m(*LZwmJPv|sU5q3Y4t6DecrIx*&^ci56
z=w-$0vo%a<Z)YT_9b2#iV>XF3fId?&x!9wIt~jlMyjN4l-R2A%?+`PloJpgXiEj;9
z>!_^#XsN;Ki)!Og$Jv3fKKi>1nW@6=8yB!!>27m1EyFA8q&zIv-0DP3G7DilJdn^z
zhpDrB*Ts!6Job{TFDPy@!*&p0AL&kiHn|q=M!^q}eeCW?-fvheki72;$BC^%5QM(U
zY2zL|#h4@y)2wcLyP63GAdmt^WXmskA-AK?Mn>1Mr@S_m{BxmKsU3Gzzu)f#l1;lY
zpH4a*Q)nao7{GmO`c_*=mFngKNiELZX~VU;yi_rKqZzS*bxUVUNY`^Q*9az+3>Gpk
zwwA7>V__b-j(2B--l4&{&t@a}xmm;G!E~2CYUbd&6nn@yUnwwKP4g#EQsP@x-f@PU
z+`h4uAk~f^#o6$FU!PJB)F!Vst|7xpJGzSLq>y8(1WGkedYkPR4pn!QNN9||m)Iog
zt_G+dF%1x}`oYnqrsuR`b`w6?VF?CePZzVJR@?z<BvMW>X|%eGGxL*Z=34>57
z5Kx_|<mj$_uicExNYGn{vbEjV5^kiovsF;(dyQ&vvhXHzEpSUYxSXNZX>&Vw=4>Ho
z^VeG&Nlh=tuwaMdyK`6VC=0389+X2$p-7dFuxibfsXT#*5uaa4P3vTUj^=T+J>g2|
zKHu79nges-^jDLN+K4nRtjgw5^fH}x2xBd$aBPd5iyO#Gq}VJhlLQX8_TiXSRf(+A
z>pFy|jYM&@25+d!BvVZJ`~#*LY!qVSh)iMkc(B6WV)`y{Aew9GSWVn!yD);KuH?So
zO&YyfRH>9^Sf?IXRJp>e32PVUQe~LDdkq3mXHcnYmd4C9<vSn%n%#!AK18WY(Tg6F
zHNT+qT!l(I`E0@%_3TVM!X*6bbT3d-m02n>lSK?%u9XnP)Qsa-#9YnwsAEmBh#v44
zS%l*2lPp_tmxwbcS1NW+PT7%}$&TO}LsF!CYTE-EmbK{VO^{lgxHJkus~4R#yPJl&
zTMwMYra0UNjQd{lxB4q1OBsV4#>~|4Ku~t-V995%r;A_SX-p}cSa?m@gg`#3w)EY#
zN`ZvCWn!Jx2I$B)tP0J(rUcfm$TR>Ga#XKW2jHb~%9;F?FS6*~Y*bc_(zJP4THVQr
zY#Y@IjW(H#T>y`31Q~Y1juZu#pdu;l=vi`jnm03aD4o5*Zo(LRTS7{MA?I;1$*s)h
z-pzEymXW`PM6q%8;c`$i*uXrHtVv0?G<FuFUMom}J5;l+x2|VCUL`Kq1bdsiQ9x@b
zwWr5osut?*m)#nisGXLh;0}{N%l=hnerW1UzMp6I9v&R$wG1HLvf*YOv20jH?(DnW
z#_ABVQ$(wBjODvKa>)eJ&3&85`f~tIHm~6M4j^c%$8}NNEqzvrcE;O$r=Q&b+Pwjo
zDyO`QmZfcAIq#w#Srs}p(($WzPh0E7Zog(PlC>;dxDCgV=JY7yI$<$u0vV;3hcbVI
z-Q|`x92hup%UOHdSJOh#L&;hP=gs<sZARN+EZ&7((GY+z*3HmK3=`-3TFyD!;xgOs
z+~Q*r+$M+>Q#=Hh%}AZ-ce!Y@Dc`{d#SfV+s`Z;;PQWpsCu-cjrBtPHGGyPw?Q*|d
zo+UTi>fA>JhSB86fO(~!%HhWWAG=h-kzMe1mV9|pHpJd$Uaj}=17cn&Hhiztlam5$
z=@h-==2B=K(RhTlHk)h?fR9wzv*V{L><(ZBP0p}LvT2aMLvEPoT-`rF9?#0zkZ;&!
zB-}Q^i_<`gJGf-2b-U9s#`~L*&bq!rSiUo1qS)(RmEzDi9FDMpx+Isu(WuspG$BF7
z5!N~q4JJNKdcjTfwChaaHP~>fvNYUwD>BS0=ZIde9jO?E+SU%ITr&>tA>7tyTKdd6
zC#URfTNuPMMo7&Z{RGT-rqyY}3-wh9>YXH9-Xb@(aT+B~ct~AlxtJV1U&NJT&km!W
z8fu=B9ae`k78JufB0*^-qo!9+OPA|;%U}jDAI)vF<|{N4q3PfnH~SY!FXqWzs*ueD
znKI|^d3;hA3oACD3k@w7?ROyLp~}alNY9ry1LCm{5E@oLSlc|XIsuq4<I5Bcz-aHJ
zcX6Ir-FMY1Y*YIWC9mct(fG<zwJKW4k2!2|JO*3*3A3^#hy*fnSLy6Ch%jB-Y5~8D
z58FwJo8BolfMM7?ai(ufp2&$0PZhJArqH?vYy0^FylJF^_w^>eJfo{HX^zWjEVFg)
zyMCy_CT=jz>7-g3;vqhNIUiYcC}|}Ni#$Z&mfReY+23Q}GR9q_sW~T&$8_>OfhZC4
z1Wz%4aX#5AjBn9iI|>oE3b{apTFzFv?e&t%k0V|5N}aLl%A#9dupMm~;~Q}$I4;AL
zN`-YklNPm_-##&ZoFJl=PUM^otWpv1S3%kubtaC81@HWTuHb`YEA+XRJND-V98D~W
zY(;~8zyQ~d_B<-Q-733yYM{`z9ts>H@K&UP|I^;boTE--n2{`LWu^w*ae{zUqWH>B
zDOl}vZD!BYODcUb-3sg^9+s{Mzk(n=W=F)pCb0Q_LOF}<*<g0p$r1G@?%;$*j%CSN
zg$QvKj%Yh!hZK4#B{`euX2S08V(K9>$pDf;rmBkh!>OL!p!dy;yxdlRwwn!s7Xdd#
z5yoc><7RY8uKi{)a3{ipa*98~5?79aWvni4q5ifc%Kb~gDF?2BaN;5q^2cBm3(!3|
z*<E0*RWrrmgGj0n=lcirR3V4_u-i+_%W}nl6%s;UX2t>CNR65+$U0dgs)fv`*=+HQ
zuap_`M`wRcE^4D$xQWgLt$&D0i(H8E%~tf7&-w?qoUkrLv1kNf7tt`$+4jI+fL)Bq
z-7@bFxyiX}r{EgvZEnlZB^0DXC5Ks!mAKuB+Nq(R!jhBDLZI)d0&UMwQk@yY4YSCI
zUP=x(-1R~_hDSPGFWR+Rb7uMW8gG@Nv8}HRFM|`_PSEFMuk5zxr%4^onArDcSlVW*
z&Pkj~?PW2>A;EDf#Mr%<DKza(IJd^?0*AS&(N3wXc2W1v_d*mC#02>Y`@}?rYni#d
zqNc9KCCf!PA~(dR!eBT|DFXlzh(YwzIlz^|rQvAMuK`5eJu$we14+W!th+2Xv?mEg
z+vfC^aLY~PiMSo^Gsj3`;`Yeg=-~yKk(p!v##(YrSZl(~0lc!S7*kZ`wn$3~$;HB1
zegW(JBl=RU4^nD*Ik##v4C^Lq<t`s9b~0{+KicZnckgdc6Rr~*=M@=Q)K~`GWqs*B
zMB(L#hOZUHS+p`e54Js?v*PCp#h?AEextIvV7%9d@G&w4{+7X5xG=z?C=1>iA>3gv
z9_28;uFN|-&J&LsnkHnC2}X^pGA0xozcFn^)eQfMnoO(U(!Q~k$nw&h)f25_r`zs&
z1An4RW<%~al$|_c!!L309H!P}1FII{#*TGrG>jF?@6-7{yzMAaUnp}=E*ixaoet|#
z%0sgDSV)<hl^`F7bvepHN}hI>50EnwqAKF^V5we8NO$|}jV8B5WJ@9^q|$@6@#Kmb
zY)k3uw2?h@Q>dsJJGFAlCr)9vF6P^wj_SuN)>x*9=yA1N3@v~!Wfi6vMr#~CJ>%D%
zZq>NmJ;QYzsZu*PyLjV#Ox2gUp4f_Xk?AH5_hbMfcB@2vFev65^eX9M?MkRM45)6T
z(9(Kv6UNq2zc^}zV)b)DS(Fb7WUuUFRy%x*c^-fzSM#%`5o=N9NopRF+&QlU$X424
zF-ns~`dpnXMYvm{cczw>6MfnZg7dU9Vfbb5cv8k@s2i5okTYjN`$s~((%Ik*KN}5I
zC^>j7B#m%4L96*@Fvje5eF{V6dqzQ1p+b>0twY|LT?^w$Er7N9kgWsemGR}h(mu`&
z+RXOK%}6AtVwBpo;;B|Ty7fe*1NmJbd@ezkrR#B=<UGF6EfZ<gb+M9U)=vmh3vbj@
z5rv1XUN%vto{OrpAYI@pe7+>ZaywjOxk#yuQ`=KNBwM+F9~%V^J7%e)!GTGINU1VT
z${g>fl{H!-@OFB+kLPeNSRA(jbben6dz6^<WFNS28|P~9R>xxA)So`hMl#hNgxOKa
z2Y3iDv)~D<Ve!&2D)o}r)iIu?FKs6l&O{-9z=(H|2|VAIQh6V^OZfTbTt`Zj;`T+D
zhZ!wzS0mc&P-}S0Y6#!@2X>%byJ_*b?K_W7=~YENhgBVB7Nb(VJ6kRD4pnSaud&&o
z)y^Ht;f|8EYwcXpY_RK7U~M7OL8&RnvTQ4u4a4G85SCUhuv(ZtXh-Kvu8Ym(dNNX3
zBhESI#q*q0J9jQql{{b-fzQ=4QNyEy-sGfCmw`$eMfy|0NlUwJcU<0-|7UiQC2=mw
z$7m&kfj5?cmWk>PRTI4yL^1-#fnkWL5gVkK^EwK?7RV{px$OX1V(%7od_3yiU{Bmj
z#15pXtT)}IHY<i~B<3VB<4)T&10cB?skd7Oj||G$cruY)U?-Q~XF?7#sZO(y8byz5
zYACQnq=UH5(`(4hR|;a=;Gk!b+Tyeyfg4zA0#D>aBDzcYa3S7z0I$T*??NwdEv8xu
zsc1dF*bPr(uC`)~nV$i`fD|usfW@w>1uR9PQaU;(joB$mq2vhV>&mFpvK@RJJKZjX
zA~Z6huEL}V_QXqQTp8LsWJ=I$gl4D3wpRo{+UU$TYOl(IG8GaeUyq3Aj!qVlp=vTl
zB-HWzbfiJjgZi2f?;5)|qbqyFq}{oBpJA5D8`U+^4n}e)6KcUqFKR;!d_i`zmn|yC
z4+!Kbg1u-#))82D(s9cP9d~|yp>w1h7)=73Tl$o6QO1{#_BQhBC=lwF-OO-p5}bs#
zcOL-PXZTz`by_!YEPX2x#g+|ku=$L?4XHb(6Ac9qpiJk)hF3`mJ3Gd*bzS>6<Spjc
zTrnCIt0Nq5m0-=M1+WNobPz*kzMXwcOP3Vw*Wh84t=#b*+8H*o_Ik&}*76b7%#Yrs
z4EQjM$?iN2)c2j#d7U7pToeJgW$Ql5W3xb;3o}OhEF(yIevW6asDK)wqTSua1LtM#
zc8auuXT#N0|KvikW_Cyq`{`s+!9$Vuo=9h>DG@e^{D3+eSo)SGLT?FPAwz7dsroMc
zrh+(}#cFvR*L;+b7vTOI1@{0JEn7|2U&xsz_`Gx0e4iS3n+U*Mg+k+Qpu9xEEha%Y
zFzMWHMx}y>m7=3#9`^W_aI2^yjVvNGx5O1D)37CC1s4l75UZpzzPNd4n33TCCn1-i
zI=vQDJ$~G<Q5rdikfx*^B22q;2&A|Ogn;%!ab6zKt8}v{O(L1gJW1Cex)El43V9~#
zNUo7>ha<JfvA<-TOA~VcHT)f9(?{B^f`(kf!R0bL^&b(v7u#n_%Wemu0YGbzuJv4E
zOR(NqDKgx=me@qw+4?BhxRn=a#htNpBpKYnF3-mAtNYOtCBzld;;+b6>*Xsd4mhq&
zG-75fOmC@V3S742BVCE(VTt3n%(QJbm$9Cm!`;+29A99}a78;lDt9*Mz|P+fEW_KH
zB5YJL$+aG9eX2X!>#+FY3jR&M;-ha)45gWMK49nx`ij&&oh{V*+{}tQB8@bV37gzy
zTfSn#XF~R>><R8Da>kce%k^?i%?>dXkdWJ3uMPN1Ljh5AEPsNvad;kE{XC6sXhiQY
zIXl&2HNy_CV+w4Fl>J(A)Fl*Yu@d@msiZ9CWCyc-f|P*0zMBwVWffu;tn`}aZlf`}
z&B8Sm_PtFSwGleR2NWc+oIO@Ykui7g_?7gm*xz3^-Id}pTqrGPZ@qeG9>!+lJ;N?G
z`Uvk-5+iKG-sj=zNp96{@nK8_z~p7qUq5Tb@ksP>m6>D>S}r=IQS7iT-TD~7aG@Gt
zcKJ0z3&gs`<VE+fVKhojS3WLWsl#(CR8#lnK02q<+ReAX?%>T~FBJ?^z5Nt1X5D+s
z7<Bi1jsxuXNqQ0VCp(qsvKl}jQTEkW3#)<FI(lr?z_(|*p4u^8?S%G#`B0sBg{m*?
zRE1chysU?c<Ng*>59m#<pN2il{pghIE+*?t`cxVVlUc%qXp!d47MU4o?JcrgBU5JE
z1+;$YUdj_!*#1g$j171fvsfzWb`pVT1Rzj$Ttyw+FBg$PV0u)mZkw?Y1@4O#YD5<9
zo<HIb4R%GYM?2sQZy$MipDz|fCtZzm>28!eG$V-)<O*8qaZk)N$KBYf)(TZFfNY$M
zY!lhLQn9l`4X&Q1ZyUN4R2DD*aDSzsCmMlkbclxc+&+^n$9$!xBjed+uN$p8W2{2K
zs_hbjYG!u@;e-j9b}Ea!1n`h@0_)ikX_)S1F!)|fxe@N>C@P*zp2F-Z+3;DZAlA7=
zkins<4XFEC+31<_uw!=twwJo*hCR%sD?-t#;A3|($&AEkV27`k4za#A_}(P8lw!Vi
zD6uW|VoC*ej9@*viVcT1>nfkO4bdV3tP|+*W<4mbE0uH-5+NM2Os?&03el8MWkq|j
zq-HBfw=p`I&2Fp;j{1T*45yMIm@OJ@W`LKA5XSAbR|{BK4dZp1-SF_Nj1cT)H}kII
zTJ<gJcQz+f#*dUTh-~&y3?Vw<X}=T7d)#f;l0AQ^oEuAx8e3c*1q?9Qr2XoeLf84?
z;Mn(?+yFd$&D@gpwa%;=T)78uyXD}XEZl}c`aJ0_=|D~!t<+?HRWeT4&XZBWGjudr
zk0*!0s~qgorTHcjS@aESI;YN2Hw)i6q%-re*O)m_r-<C?c$HJO8?L3cD1MkE&`2iI
zbVU}t2*T?NgO_RfA`2E#O)Ek-tqH9?k|WD((yQIq-4(l<J4<lr^;!$gER%-BigzZk
z^G#i3c?Nv?bj3hf-DBZvP3d?68{PqUt$DI`Nz~dw@HcpNwW6uvNz379{hXs@0_m0;
zmCG$s=C;F0P;XyJo*&NVRVF^GRl6HD9K1DC5OLuzPTP#SK_e(xiEXBuwh9c)N+Wpk
z)kaw#n)I+Dqgv5qv9QQ!unN~Mkf%Iij5p_sIB$seS*uqs@An;w3x%tP+$7x>NctM-
zCJHq|JE`}>E*6fk3tZX28t^z8O-`w@PiwkXt9891U8=-E`ps->IN}?0I8#vqRk-t?
zhg+<&recv)rCMrU9nRkLlA!>R#4jd4t2)(7jj=-Ry>T0vv1Bd+0MkRX<ebcg07=!<
zQ6#b9aVv668P-713^pkGk7u&gY1@a`v2%>IGD8{OU<2(Fk}qcc5iT5^D#o-C3JB)p
zKu@hqj%{Q1s?Zk>iFiL2a^}r4Z}A~PIUuk<CpG!Atu=Umqm!{)5x1^_Uo}y?x{Gt|
zIzOPaw+yXo2U@3KbriW<u}Dl-hq(xK7<vtjBnEegvho@AiRK-d@{})!bVF|}xGO@T
z@e~;t<6*>`vTbeKsOF@B(xzsF(+-i?hEXEJWcGB)X>hxt`+es$Twe;{rG{BLpv<IW
zf##^~3ekfHvGe0e+flA`q7K-!iLJW0k@;Rm?#A_)SGq({c(KqTV`gPuWF0>nn{~*R
z7ui`Qi%xbFBbC-uc#zeFRF94?ST6-{eTk^MEl-#tm0Dg;^=3PB-W0;yx||r4M*4Ye
zRaa-2AI2f|C#3iC4|6RfNT|*_s`{dozp%C{m35}AP{CY`iwwP;M<LTuMHu&xT{Ev4
z@N#d=VD`#3sD847bZx1cIQGGJxzT3$%&|`sZ6!VrWTO!xxtz~-=hJ+3imv2MuE@5k
z-Q4DmAo*#*+}TYOFQ=zkd@=$M;L4@EMk*2EhyilnIIWz8rWAlDaw~hMs)2mJk%2(b
zMsR%)bG&`0GL4-GDHVz<h-HuqHlC<T{sb%?2<5%*X?#4j=QUFpO5)x|)MHx;GHkWT
ziF71QmxieY3p0&LBxsd_5uphAEGPyO9rx<p6NmhAV`=g1iYZ$$eG>NEm4Da?t{cmV
zF=4LBNnKv}QU=p!5T%xhbqCY5a1BPOM8cR`>4At8rx@Qws?A`S<?SXZT=u1ORSLk`
zcs%BxY(jU(cT<b28#{3@qE;PGZaY(Lua2a{i$rFa&@vDtVoFkL1Y4l<LcV*hZt$7E
ziOhA(DGNem6(81%neGkUr>A!<(f1_qSvm%5cnfl>z?)LFiG@OOMdq_pm-Al(Q+8mU
zD$b>t-Y#wtMwZ$$ji`EUtnQ`JVtG$@65~v<lH9kiwQIi-GW-41Za-e&&eX>=hDyI!
z>eCbYGF@v<nc>u!AKqaYor9DP+uk)zw9|?3p}t;`bkhYez6Q*h9eBtCh+;~d@Omyv
zE-jezga>?~UM9SfU+N`#u{mt~gRh*+T<5%Wsu{~t!C~rNkDcUnz8(#tBzQtvt<J22
zGA8F(t;>>QlbcoSs3-8@e%c8!o&AKUn)LdT)C*(q=Y^%{>!ov&u(=an*K!5LGuNaB
zo6|@|u^{cX+iqn~;c|AH4R25@XX*>^$+*H(tQL`oZYxt)2dDXHp&kGQqrGT#6=_&<
zO=iAPd#S<7Qc#ps?3jfO2dlbv$F_tENr@U_kLiTe;j%ZQ5(J0t28g&&M_Nj3D>{u!
zaf5`|4Dh#ft75xI6#d`^zAcX-cBSP`rU9cSqya5=pV4;-BZ}wS!yFH*F{Is2EDJs@
zx@V6UKIv4ZmrgN_lZ@$9N5qD}Vs&B5HCJ4C1>o+ntAtO^(+aG@LCn8p*%?4rb_S3=
zCg+QHFkw5>dmK6`^GInM+dI)zq3!cUMt;4eMVhf2Ti48KT5@tNFE$yp<h0Vu4~lDM
zfiJd7Cd|twzznjn9!n;zgKq_Ieb%*04I_x9Y3m+~;R!TQVvS1b)(=QF(hjNAdIxCM
zF}9X2<W?uTq|Ulrd;~e<c;Q%NDVu<R{qzC$1or^O*+W|p61p!hHyJe2P@;)MWA3ZN
z9R|I{Syu8@yrLJ*`i0dQ&s2Ac0M28V^sXH{nEk9RUpRlpZ*9;Z#K+sHp9$&Uv>c-6
z)I8XdtWgCv+w^0YOenQd-Iq?~XjS%;3<^mO^9y0Lg5OKI9>=;5z(^W{HO)lwMD&r|
z81=ZbS*=@v<-x+0``k_r_?gt$keL<kU89`oO`3oqUvMCbesac1=WfbJA+QLj>}nKf
zr1z-ao#6nGzfHRk`RJQK{xY$dIW9BF0P9bzYBpJ(&!|kYvWXWKrZ3W>@-0FJD4oS3
zRwkJhhaS%7*csj2tBPuu({~q#%uNog3F-aHMBu_OyKnasL=*SQko6_5gO^$@k!_%X
ze!L%;gd5}IfFqKnOUFgEu&X;u2LlM-CDS{fr?<|?zr^Uhn8+_$b$W{STZt91g$zs8
zYiH~ikGoioKZ>#JY2uz3IWPbRs;jdOrHZhoWGi94Ur0=*lzoAfmqBBX3!OqGWh8nB
zmki~sQ=1|59xf;24SR-nj#gBtfkSYa&qiAlJ+V(~upQ#dF5-|OCx1b<rIUErBo~+)
z%1D?dDqaPi$m`?^yLJ+;J>zP0?mFz0hU-j5!+CYc`dJ*|wwGN^xy;8Gtx8sJ?22Dm
zjJ>$@%JeP+K;6laRaXmpz;|s@xG$*0TQ-YYnA);fVgukUT8V(arHWT_bElC>-5SLa
zK*~{xyCx(@8UL6}oKDmri`+KpB9d-HpujD{UM^&%-~&GhKH1Y2%Q9Zy<dL%?KwQGw
z8y_I}#b0*zsx@}}t<x=*OQ?%B%qx%Pcpi|XG@-_Kl23LdEiQsHR~eAk(8HeTPIjCD
zTeceHIZz>Y%&oa9G4rV(cZ2AbDj3HrmDJPI)L?i(s1alm&!R&snIuv&CmB<Pz>10t
z9(VH$ZQQ0YD`T-`>vry0k(||tU{ktJ+ssl-HOy`>G%N`2DAXft>w;cd32MiuVwv*2
z8zH0p_FhDKW}&p^mOime*75CTV7cq9oMBD$z~FKy0ntx_zjp3dW~X8$JU$k7;Hhx+
zhLE9{SMY<_SEw04j!`Z2Y-T4yp-BeP@pefs8(|cDzIs~F(uT7$I2Pr{DU-G8VkhfM
zb%pE%TWt#Sl3=v#0<4hWONPR-Jiw-1n#pRcR7hucN~DK%&Z%9zFGIXkGv6$w{Ul$V
z4LqWL7(tqsQ4;2ZT$@6ZYlJ((%YU}G9#;L{Eqd&UjjB#bJ}#JOM~VD070x$cE|w&Z
zv1sL(HTCT#(;L)#%!Sh1%-ZQ$$9&SbyRq`(I%yQT18SA0Bj|!<Wc8A1rlrPYe?7ZG
z<v3lf;fCaDi%!LdW)pt1Lem^2u5F$<<VF&F`@~gZDvPi-E|mly%~n&}J4&(+QatZ!
z(gMvG^GLTVmuh5YBSN}@@wL0qDxM|TE+uo(9Sf*h8RX*IWUum}Ti+F$mHs6dsD@|Y
zI}#!wDNzuEUbw{=;9!o{rUQ>?H&!9RnWEG&M`t{z-o?cz&g3H6fDFScT6??A%$Qce
z-a(L8*uA$0cybsLA`|U8JVH8gGa+n@NU!0~wg}@0V?d%Z2KmNeXT;DJ)#MpFPFY_s
zmkG%TQ=%5T?y#yZ6PkYD#>XnU+qdYWdfj2Q+-6YO&AZt}Es*V$5|hg!+l9bfJ!~D&
zZSBt8Vm(H^+?O$W=ZG0d?mea_RuE=<5m)6?soo}^+arm)Fj4bSelB)Hjwu|6hfu{m
z_;>r1HPG3i-GVeMLasQV>*WJ`?8tS5CrE@d%*{R!7<Wti5SdzBiI#T^`7+r7cvSny
z+ztMgHJ4(ee!XFycA4NZup-4qtZ1&*i*n8EAVgq#h;c2yvWw0J$6#i57S=l!mJWs$
zx4|5<UDtKVJ3tLj0yBUhYTnw%*=Re;hicvgXBc@<!(uqB^Oy73q_J3CGC5RP)WK~B
zrb}c0nxO#!)R4r{g6t6BWmQ;IdR~t+`2wU8#bWxPu$gY^b$>)7{TE`hSjLoQQjsw&
zLY|CNq2_7rQ#5LpNb0%+Pe{k&^okOiZ{!Hc`N~DOS3`8UQ?+4JrPm$RXYR4)i}Zy2
z9iZzlYK!1LUp*$nPwVU#XsIlg)^Ua#?mPRrD3th4f3M7U&WK{$T=}-n(zlc{1HTI)
z?)TS|=e>ymw4nq!R_)7a=m&Rdd0-Z-5v;0=H=_Yu=|#j$`XWqjg<PYBd4P1nQ{uq$
zZDz%Y*g#G#ET+mu4Zfhnca8zxJM+40y1iRQ0Gumh-j2rYd5X<qSR~M`-8EjtYiSWH
zp4DN!EbaQEdP10~x!Nc<7@{y`L?I{;eqKQ*YeC?Gri4;GHCpXg<C9u(nn_$?&kG6J
z`HAKpeM7*HL}1;L?Y9A<NOan3-*$6vAA9T~novTAaB<xPUu`|dj*<)T;m&LvK?wFu
zuLZC%gVwAbS`{GM!J64vDU2UhGs`HiTN`(b-Y|WYY{s4VB~2bWJqc#wo6Q#9Uem>;
zu_3ncY@(r3tAv#<=UH`n9PdVp8eqdfx)7hEK%Nyyrx75vb}}f8MxjQNn+JWH<xv+S
z>glYqSx9$EhrFqo^qTFO=E|F3Y8Y(P03ihO&`498!;y?@?7ee#Z$)LFglo7*)wJ@t
zb>=o_zSwX9peC^(WDT2??t>ti51E^od5J9y?;4(qhejFFz4JYbE;jP5GJ9PWxzOlT
z&gy~%o?VucPaz1C=P-F4zlqaoJSN5HqciOeDqE(O%XH9=_*g1V1~iq&b{o`Vr|mu8
z+~Zm(bcs|{2qHnTtD3ka@M9@OyO0huIhaP;;~jr<3+^%jZ++UpAF@Qa4mYQ=nvK`$
z{hZ3PS1UZP?$t^)0MN;+*!ti$TcP!$J2@d)8bIN?T6wuugBg^iaqx|*9j`?-IhmRD
zq1C8Cdiefc?=i_vJad}j@rNhm41i3XV56PS^)(fx)!J!yIaeU#?k*|>szi8Zu<|37
zxmd}a<S~z^M1146w=sL|^#dj9x;zC1<P^$HD|>#Cnzfx-Ygt>~f{Dh!ax5!X^uxRo
z5I=K0EI-TuM2@qG4W(ssw>?%M&oF@ESY#wf9gmZaj{xX~7}}rQ0#zkQ9?i8A<Iz}k
zHLJVhvJscJOEmyDp}gSs@>tki3?qjErZsa-7&7d?5Oje(s4{nHHweT{4lEmdcMA(y
zTM&?fd?bs7X=sOLr!Bu7;CB_6wo~QcHl&MAlMmbXL9BMIyJ@(C4yoF8!xyf&gwnBc
zlA1!q=yZ9d(H;1}drG*gd1l_uLBav@G#MwO2L)T_V;8?NOiv_zuyuFvm3rp}xWzWx
ziH+Azy2(kiN<sLBS5(~oIfY!)@nMEwT}Ah(dEs=n8nctT2B_vKrTpJ8<CAKf-SW2o
z*X*_|&2ErdeDU9FweVm5pXOg4<$rwr?|*z-zLx))`mKR)di-eNd+m>$k6Q0XALYJ3
zde`~b{$A%h&PV;fd?)q``tMu#we@#9zv%9ltnY0+`+k>r(4O>nvrn0K+N=HK{-}S@
zKU;a1d1*dc@0_pN@6zu*Jn3KQywjd?KkBbI@3ddF-_OlM?pc1EwO?tzcrTqN?MZpm
zFWR&9UH#O0AH{dFPx`z4m;Q_Ur2Q=Sl=-TDY5iz@CG(^`Wj`OkdVFx6<tg=}{+jwO
z^OShh@AUWfOXkl~A9~O7ZsXN{av$}J`f9!SFWRH^D!)hnmCoP7dyVAx$MLKFzWcjg
z{d|3%Ui^>ac+tPp`baePgE@9`<|PW#b*a=stOS0j08J@tO3{M^^e($Bo#(|=ib
z^!vHIQ-1E@MS1DHXs_0b`~2Hpy!Y0-+;{DF`Ooc_&S%c^_>U!iNWSF0ZawXNUB7g`
z=D(lShwOJ!5Bjgl@9O=%<vx$;_w4^l>cRV1zLx$d^YhUkYke*8k@{};Bj<7Sd*x@n
zkD6ccf2RH1*AJPW>A$9Yt@U$%-&1~V|8L=b-{;qy-|y?8|GVYuzP_jap54#-e@^SO
zmDllSdtY&0w2!Tq?vwtaJX=rBuj{AukNREq#d)WGZhtNHqCQ%mb$&j6m;cCpaX!+2
zK6*-i<~-^Dxp927^0M*AR$j6nZM<L4pE)0ozq9b7KUyDkem;7a{>XiCKGHuQeJ%H*
zK3kvl-jAO$&-$JBduQaS`SCA)Q9rgm+J7E>lzARKxsUo;-f17(Pl@+&ylCIGe%Sbq
z`=q~m`kC_LeYW-a_^JE1)X(0YHlD{n*B>RGNALAR=a0&}-OsWg_1`7m+fS{p`g)i9
zXzi)>s6R{nEcs6PO8TAuZuv+1D~;ci`jy?UtbTP4z8}L63!g{wwcY>BNIqM9KmOkO
z$FcuP?xW=Q*55fF+rMx9_a(pU;hp|*<iEE4XJsE&-^-6)ent7CalGvPzU1>)_3HQY
zIG(ni63^pb)qjiZQ};2lS9$gJq`fHLwVslX`a78y{fG4H_|^NX^={{B{axeh_EYjv
ze=YG&{UQA`<vS}+`n$&0?Wg3U{#xRl`jmdro|ISp;=Rt%JMF9XOZ!LbE17rNQ~oR3
zuXykBU$vjQ&-yEw7wswa@yxxbKUy#O*ZKIU@h<Ube^oxqydS^hzovd3$4mZK<9L^P
zZ@>5P-u_PJo&IRQbUt!k^!L_BnU6>Ba?kd65+CW0qo>Bt=ljKZwtm+BOnFNFs6TUG
zz5UGjv%F`IUs?Q~_F3!wum5iB-&uRwdau8e{h9vIdX--ty`;Wsz4!j!{z~>M+WRPe
zd>3Cy{SocG=g;jw(*2qLwD2?M*OaH;clFoWPwCIxC;d@>EKkly>htKy{l0!mzSr;4
z@ATL2<00{0-ZegQen@@fe|_|B?_*ED-`i))A8r0@^|So1d-@^$viVv2d(P)`@>%n%
z<6l{O$iK>G?e94s_5QQx<8wbhj-S2#%zbjc>*tU7A1ywmKT=;uzvBOj_p3Acvi@rQ
z+Sbe3OXJo0UES}_*x$?2a~$9G^WuLe@na+}x!1@(ww@9nsjs8o<v-+JS|3|a8~-aM
zUVVHwl6Q%Z<9i*wWL~t7t(U~tf6Y7pNBdp>GxweMYQLmjw4Ylqsjo)z&i&)|&(>eR
zldr6Qlz+GXk@IflUFy5`XYG&rKXX4*KH7b8Khl5a=%xE{41at!erWzqAAgI?`}ls{
z{+(XFw(v)qUu*q}`YVgS();`!yxaM;-uK*h8_)Ll(l5?a_Pu^_|4i%M(vS8ZTlq6O
ze{A*V^ZaX_|5c;-(d%dH-;L#W<-XJZ9s0*Ue%AQN|J}R9&vyQp^0}v1U!OUDZ0m28
z_}t@H$A4=dzo-9I&oA2V+4y@&z50D`{b}p};Vk_({zw0v%Ifb_{^{>j{`K!v-oL0n
z)BcBlczi+s@DD!UqxShqrAJ*VndYN5&A<NjQUCR?|M-uO`XB%Cpa1z$|MNfp%fCG8
zfBBbx`?p8^Z~yl1|Nf|d{Qqb@$MR@D%KO*&{#Cr6&i7ODS^sab@v!wDgZQ8S{n@en
z?`-GK{!NeX{>SHW1w1~FE8y{YTmg^I;|h3u9#_EQ^SA;YpT`yO_&lzF$LI0g|M>o&
z=jl<?^lJ4_|Mai_`nUpqv>xBZAGe<pza#tqXPG~Ho?d#7Z~w<#zz5~=6DdJ?)FzZi
z{Z}ZD`X8Y@>VJmvsQ(4Zqy9H2kNV%CJbw8fKY#fPU}9<i?f?C+t=Vk@Qvav$m;d7-
z{Z09=-_ZZdf6xd2Utwkfl~uLH@jn;E0R?4H6vYt}eU@3G6+Orab4)bI0dT+^2+4_j
z`5MKPoJA4Pg=kWmV2Y`kV`^!c6OJfiBx;HSCYqY|-v00VUDnrH`N3MO-}&}FXP^Jw
zXP<K}AA<&!)7jY>!-|Svz{SM{W5$d@wQAMyc4=uj4Q+Yk<(0Ei$or_*<xd%7j15MU
zAxkt`fQ;pjNyiFKrKD(I()ri7@k_7u60P!`#khW|Hfq$UfwHf^E~lZbSv`A}v(g70
zG4IA?D%idR%RY(FXjxfVc6_n|K4DN$kUkGty?S;1Y{1pkRa;a*k3~~~t4#sPo}{6p
z*<w_C0*)0-k|*RCk_t#u0b88eo~D8jc|LkbDj-b-Y%!WW0e7+f(~lX=U-HFhq(@R5
zp4yop(cE%AK+}-B@bK_JV;StRa3TEs{KVtw=_!R51kdDT)R!9aN_>olea4HYj>`w|
zo0kh8A0O>oKVXA?HsHIqo%U(4Y?+Q}_}fJ^-0dP`8eO}DMoyt<x^ktC@h|QVzv3YA
zwEX1^8n^fct=Fza6RFJ(qmLn=Wtn(Fwlzh^kvq|~YgdHMm{CqcTYL_B$lybZ(Bx2r
zj0u|k1$+nhMu#n1P)F+RIqwtjs1zceryG8P+OO9^%hjvl?(UA}yWdC6abe<V^nMbm
z4VQ7gzNjX3UB7;PRO#}UczjY*;j$`9BUKRv-isHb>VX5|@mjP<*OA#_9n^mP7+ljT
ziN~#NW4IQ*skx?yIVT-e2>U#5s{^uT&6@gIqPe+gi;C&7XlRSOj~0?WNkd1o#i;hI
zNWqjTQ*;dJkvSairoAW8Jo~#MzH1V^y}k9suxO}dq-38K(!DeV!&i1-4#sc5kVP9c
zTDYtNm5>!FST83L`;yE7Y36_}KB+y;9L$h)p@(D+NHYg)F`7LqQou8cV@N6>O$BUm
z9($S!4$A7%Ls9{0DqxGz><LttJp9v-xlhY%bwK(wjn%W!fZvi*+>Sb;)qA5&8$5gH
zJg!D&%RC|Tcj4lT&2=wO8~22%nyqhSEiHzO+=>I6@5q=Adxqd-UbybLLfP#Bk(+QK
z_px~V->8P7uBp0Di)1%8&dfwXL4kPuGBUKqy-knr(xplR_0!X}RWB_~>FM{2Fi*zR
z8GjGO%UkQI!ZB`J0&w9e)~IK=8_r~p)a;y<(}h_gfhzx$8nKzV&JeZCHR;*)Hj)=z
z7LRx79?Z)=qbJKO$$3lv&oR9uS3E7!-7s_FWwdSE7V~7BMMGO}OI6WA28=Gkl;i)A
zF^y+k!rOK0>Ul6hZbF||k7Lry&x)tMyAKjP2cT|51pX^$qj#fz_^9(L@px_7j_H+q
zskUi*_m<O9z46Rt6pLP7Uiw+`R;P}(c*3%WMLChg5-00#kv;iY6v$|{7|ouJ6maLZ
zm1nouFfkh4s<f79{+B<)z+LH@9Y$l8%z4=2JB7v8CpsX^?<X1KyDAK=Prs+p+Q=A2
zC4tIMTvPVRlN?+0ZPgwpnzOF|<sXfl(AzpsmYgn}k2F_qp^Tx04DdOMl<T~in){8w
z7j6^Lc<4}kC9Cb5orJ9o!^KnYl|9(EJWA&|A|B31;)!oo<~%E;YB>+tJ~RaxuP|ER
zl5I$P^*4QMSSITevS&Ur(s*lj4!wcZ&mGe}mm|;4y+@jNR+y-zh3s^)0m7#}FP`Au
zKVZ01fkqo4wG)_m5^p{@FP`@C^)RgPpel%xil-9N(V8-To^2koTeoid*+6J$sJ6Oy
z@BTL$poKSuMfNoB5{_nzQSIqS0i&>LE%xZq1H4lV^y<}1-*fu(>7#qjq5-xT-y(aq
zl6PhU9NoI4M5D2q7}cz*C%<vA4_DVBV;ozsz^34Y>=e$!Q_`ZTV4jSjg`@(WC8h%2
zA&kboZP8I(GfHRaYq9^ggYeRpc!?J7nt^sN#v(E@QlDek<l|^HFiAXP=iY{Ycz?vl
z$Lm{-MMEuhL@h1k&;bcb1A~sGpuzcEoyT8x2j?Rz(l*AHYjQw-0%G#3i-I@Y2O=`d
z8Bv9WdZQ2DIUZx%?G#VUoCrDjq9I>I=-OH|)Dk4CO$!<6oQqB+*JVsZP7U<^b*X9!
zx8<62wCAXQjZGWbe|uHrEJ$Uv7m~4VYAp;tcMf06-58x3g{@n2#51gYE_Uy&uL|}`
z&Z&enwQ=QWA!FVs#N24E>G0orAvLmxt^#*(_}Zq(ygFJu1NsCa{pWa9onli>R-~G@
z7uAykLvEp{BwwP9=yw!X>JHbHyDHDa6(r3yWnWsz*xrY5a<-3n#?<SJe8Ueh#h0{3
zhjmTIi4QM|Cwj&i<Ym{;9I(D$pC60^=Ua*=EZq-#1D#X>?|dpD9qm(QWxp*u<fu`j
z^s|A{qep9Nj3}kYqG%Hf-$O03CqElHnk`1Pry~W7!iumM8yhQU<8g@=7Z-=V@`TJz
zPuYbQ&AbK3I9f>d<oRHLqn{o(PNVTwV^q@7%CS$nWZ&YH1=)E2XTISt$iIb|O+Lc%
z<;(T-w`izknA``nkm=7h$H<MFWz3S+@p!BBG#1Jo%y)|U-*m$SyeOW;b-ncroF;#P
z^DIpGy{+v`9Jl8%V&6+s1w7lSq@pvPeYpM>`Q%4mdrjtHHh9u8J3Rd@nt5YI&_c53
zrn~oK3`cLAI8mdmx8;p=v~r9RDwSbzf-xDd^o*8h2^q8S??){#b?Q_-4=fsLah0{C
zg`6Dl5Y@t8mNApoybRB7$r`PW)B~fE6)CtXd0=01;)O}Lp5iUh-f?{gw`W$>dCH_B
zIUi{%;K@J>nNZ0e`#v2co{5+8u`6z>M%ymu0i%+R&QV73lNGa=_*rGt-4`s;W_%Ta
zT17cp2kx>?OLOB;Gir`_GIOWFqef+{mcK&zgcc2LIg2J*$cz@1{`W`HeHk;oQ#73J
zT+n%{NX|JQ=_otw(@|F0;_Tdp2t4d6(NdzGLE9l&SSf#ra|JCL+G-;8ObfZ>_I9Nx
z2uMR4uSXh<9!4dBs`C3!KW46ZuCXuq-uPQMdyQ{)A6}V`vx$qqy+BW5-yS$swoW{s
z^y`I_8{?29-))?d>?A#$i2P4^#?P8shO-B6Va}X6IwpC37|yO>y`|s1h%=o#>TWEQ
z)!?oq&3(!>q=if^NyYBpn~7)9nkx8l*m8|_P%3fy=A$??YKV9~ZuT+u`*u;)`)#=<
z9i1V3!uz&dlZmbG;z8eS5^d)AT29Q4oCnHumw2Ut6<=oJp;xS~_9M~8RVU3lxFk0?
zEoA1lA5r4Zzp9spg`%|dwpJB6^K!I)HZU#W2(An(Q`JSb^&uTq2(vOp)LP7xzx4Q7
zw5?d7E!F`o7R?F?mvy0qWKUA+T1K<QX!fi~f&GfDZ1n<)dh(l}tTx^8>)f%L13m|H
zL7Le~k$Gq#KTB+d<YeA}D=T-woaw7n!3<e3Dj^*y;B&;uJEg@{t5zXa?~>0y{~TlG
z{gd<Xl(lFo;I5~IWKYrnN3+Ff_H?9xQAXNUo8<SzF)=X`Ejv3KBbqhCx^?UHma%B4
zrHVWmEhKxo$a}h>qbpZ7PZ#^Mq#^~ZS}GyetXZQpqtUWfzL~S9p%&hn^pI3d8akRS
zMzg1*{lh5x<vA?o-t39J9#<sV=7I!l`SSpF?AU=^xy|-AxQTTK$BE})%G3Db>7H`O
z9oP3oi-uZe$)2W#JRETe$=~sA{9*S?SUxTpyMlxDM&EMlK2~*My={0f0?U2O=gE*2
zq!O|s)x1^Mmt60jgu6xyiIzLADt=EKh|Ph4x<9|YzX3Pz@}Aq7_62VK^rPH8`*1_*
z?&qfaaBc2);yK~5AH`m;;oP|bJ-sX%YT;c)3wdPrM>zY;L`EC>4vMd)s)AFp7pR1E
zq?$G3FLh>dN6r;^J$Fc=9Y6OW+B7<*^90FB#Q8{5K@-`1w2-G)4~E|#Jl{?RN21<*
zCmie7Pj9osN21`ho}L2%?(nKo8{f;{jUKXcyL?ulR>%wD*>oWS)jSJT0p9|sgan@a
zEdl#P$$D7ac=ob>Hn83OB8IpnVfXIu)Uv;NZwxKs9el)PKjLPVX&p?G^<h1bW`%@_
zCR)hv7vDp8W+1g?9mXpKfjZCg(wFm*j`ojLc@|F%XouCCH%PSnf!X-dxv}OgM^>Bp
zBh8HR?UoiYzh5VW1r>|uRG)U}|H0sLZI(ty3K-?A>^X}C1?Tm%A^&D7)K+2Pg}>1N
zEvy5J?8(oDe8+cQTZ~4FMMvwyC_G0k7N>VZ%sHOd7q5Pc!LH+Q{jIn36e~>{g^|zv
zDxR`6bunSn0o=Ryhu$(44Yh<z9n(UV91TX_B?&U-N<azPzxIsI6CkHD=OZi9mM5#s
zzT~w<9dYp8=Ox<Bv7NEu+GjdXmOLrvBTWUoJ7^*AR9cKVGx&y5dT|OC*W9Sj!}IOZ
z<O^7t!T)d+ckYhNwHtMw6j9CjNJlHj_$y>bS$y!|A(rX4t&bi(#*)*g&9{fVJc}^2
zB{z~qJigN(F?p9n!NY?OG4#zd8jZV!QHA_pqU#pXA?JeiAH|yZ3(n9Ov^$yYE^OM`
z{5PgyYx5<~+1BP57hBs|+TOOdA?*fseQG;Z()g}ouWM_!l<xvVq>oIE4$=;@>;LK}
PPKas%y!4z5ke~kpwvJ^n
literal 0
HcmV?d00001
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.idf b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.idf
new file mode 100644
index 000000000000..f4c39b78c436
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.idf
@@ -0,0 +1,18 @@
+// /** @file
+// Platform Logo image definition file.
+//
+// Console Platfrom DXE Driver that specifies whether device can be used as console
+// input/output device or error output device and update global variables accordingly.
+//
+// Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+#image IMG_LOGO Logo.bmp
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.inf b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.inf
new file mode 100644
index 000000000000..e2e61c82c5ca
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.inf
@@ -0,0 +1,34 @@
+## @file
+# The default logo bitmap picture shown on setup screen, which is corresponding to gEfiDefaultBmpLogoGuid.
+#
+# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = Logo
+ MODULE_UNI_FILE = Logo.uni
+ FILE_GUID = 7BB28B99-61BB-11D5-9A5D-0090273FC14D
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC ARM AARCH64
+#
+
+[Binaries]
+ BIN|Logo.bmp|*
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ LogoExtra.uni
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.uni b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.uni
new file mode 100644
index 000000000000..d21b336446bf
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.uni
@@ -0,0 +1,20 @@
+// /** @file
+// The default logo bitmap picture shown on setup screen, which is corresponding to gEfiDefaultBmpLogoGuid.
+//
+// This module provides the default logo bitmap picture shown on setup screen, which corresponds to gEfiDefaultBmpLogoGuid.
+//
+// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "Provides the default logo bitmap picture shown on setup screen, which corresponds to gEfiDefaultBmpLogoGuid"
+
+#string STR_MODULE_DESCRIPTION #language en-US "This module provides the default logo bitmap picture shown on setup screen, which corresponds to gEfiDefaultBmpLogoGuid."
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf
new file mode 100644
index 000000000000..b5957343cc04
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf
@@ -0,0 +1,63 @@
+#/** @file
+#
+# The default logo bitmap picture shown on setup screen.
+#
+# Copyright (c) 2016-2017, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = LogoDxe
+ MODULE_UNI_FILE = LogoDxe.uni
+ FILE_GUID = F74D20EE-37E7-48FC-97F7-9B1047749C69
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = InitializeLogo
+#
+# This flag specifies whether HII resource section is generated into PE image.
+#
+ UEFI_HII_RESOURCE_SECTION = TRUE
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = AARCH64
+#
+
+[Sources]
+ Logo.bmp
+ Logo.c
+ Logo.idf
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ DebugLib
+
+[Protocols]
+ gEfiHiiDatabaseProtocolGuid ## CONSUMES
+ gEfiHiiImageExProtocolGuid ## CONSUMES
+ gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
+ gEdkiiPlatformLogoProtocolGuid ## PRODUCES
+
+[Depex]
+ gEfiHiiDatabaseProtocolGuid AND
+ gEfiHiiImageExProtocolGuid
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ LogoDxeExtra.uni
diff --git a/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni
new file mode 100644
index 000000000000..fe1637534332
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni
@@ -0,0 +1,19 @@
+/** @file
+ *
+ * The default logo bitmap picture shown on setup screen.
+ *
+ * Copyright (c) 2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#string STR_MODULE_ABSTRACT #language en-US "Provides the default logo bitmap picture shown on setup screen."
+
+#string STR_MODULE_DESCRIPTION #language en-US "This module provides the default logo bitmap picture shown on setup screen, through EDKII Platform Logo protocol."
--git a/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxeExtra.uni b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxeExtra.uni
new file mode 100644
index 000000000000..d8815b2dac56
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxeExtra.uni
@@ -0,0 +1,19 @@
+/** @file
+ *
+ * Logo Localized Strings and Content
+ *
+ * Copyright (c) 2016, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
+"Logo Image File"
--git a/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoExtra.uni b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoExtra.uni
new file mode 100644
index 000000000000..4f177586266a
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/Logo/LogoExtra.uni
@@ -0,0 +1,19 @@
+/** @file
+ *
+ * Logo Localized Strings and Content
+ *
+ * Copyright (c) 2013-2014, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
+"Logo Image File"
--
2.17.0.windows.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support
2018-12-07 12:05 [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Pete Batard
2018-12-07 12:05 ` [PATCH v1 edk2-platfoms 1/2] " Pete Batard
2018-12-07 12:05 ` [PATCH v1 edk2-platfoms 2/2] Platform/Broadcom: Add Raspberry Pi 3 support (non OSI) Pete Batard
@ 2018-12-07 14:08 ` Ard Biesheuvel
2018-12-07 14:33 ` Pete Batard
2 siblings, 1 reply; 6+ messages in thread
From: Ard Biesheuvel @ 2018-12-07 14:08 UTC (permalink / raw)
To: Pete Batard; +Cc: edk2-devel@lists.01.org
On Fri, 7 Dec 2018 at 13:13, Pete Batard <pete@akeo.ie> wrote:
>
> Preamble:
>
> Because of its price point, ease of use and availability, the Raspberry Pi is
> undeniably one of the most successful ARM platform in existence today. Its
> widespread adoption therefore makes it a perfect fit as an EDK2 platform.
>
> However, up until now, the Raspberry Pi hasn't been supported as a bona fide
> platform in our repository. This series of patches remedies that by introducing
> the Raspberry Pi 3 Model B and Model B+ as a viable EDK2 platforms.
>
Thanks Pete, this is excellent work
> Patch Breakdown:
>
> Since this is a platform introduction, we simply chose to break the commits
> into edk2-platforms and edk2-non-osi components, as we see little point in
> splitting the series into further subcomponents, when the structure would be
> similar to the overall subdirectory layout and of course, one needs to apply
> all components at once to be able to test the firmware.
>
You will have to split it up, or i won't be able to review it.
BTW I managed to build the code with GCC 6 just fine - are you sure
the GCC 5.5 limitation still exists?
> PATCH 1/2 therefore contains the edk2-platform components and PATCH 2/2 the
> edk2-non-osi components.
>
> With regards to the latter:
> - Even though the ARM Trusted Firmware binary blobs are subject to a
> BSD-3-Clause licence, which may be compatible with the EDK2 one, we chose
> to follow the lead of other platforms that provide ATF binaries in non OSI.
> - The Device Tree binaries (and source descriptors) are subject to a GPLv2
> license, as per the ones published by the Raspberry Pi Foundation.
> - The DwUsbHostDxe driver is subject to a GPLv2 license
> - The Logo source code is under an EDK2 license, but the logo itself, which
> we obtained authorisation to use from the Raspberry Pi Foundation itself,
> after detailing our planned usage, is subject to the trademark licensing
> terms put forward by the Raspberry Pi Foundation, and therefore we chose
> to move the whole Logo driver under non OSI.
>
> Additional Notes:
>
> - We chose to introduce the platform under Broadcom/Bcm283x/ as we consider
> first, that additional Broadcom platforms may be introduced, and second that
> even though only Bcm2837 (i.e. Pi 3) platforms are supported from the current
> RaspberryPiPkg, support may be added for Bcm2836 (Pi 2) in the future, hence
> our decision to use a generic Bcm283x/ subdirectory.
> - The ARM Trusted Firmware being used is a vanilla version built from the
> latest tree, as we worked with that project to get necessary patches
> integrated.
> - Detailed instructions on how to build and test the platform firmware are
> included in the Readme.md found at the root of the platform.
> - As detailed in the Readme, the resulting platform firmware has been
> successfully used to install and run Linux OSes, such as Ubuntu 18.10, as
> well as Windows 10 1809 (*full* UI version, not IoT).
>
> Regards,
>
> /Pete
>
>
> Pete Batard (1/2):
> Platform/Broadcom: Add Raspberry Pi 3 support
>
> .../Bcm283x/AcpiTables/AcpiTables.inf | 51 +
> .../Broadcom/Bcm283x/AcpiTables/Csrt.aslc | 337 +++
> .../Broadcom/Bcm283x/AcpiTables/Dbg2.aslc | 32 +
> Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl | 523 +++++
> .../Broadcom/Bcm283x/AcpiTables/Fadt.aslc | 50 +
> .../Broadcom/Bcm283x/AcpiTables/Gtdt.aslc | 31 +
> .../Broadcom/Bcm283x/AcpiTables/Madt.aslc | 60 +
> Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl | 92 +
> Platform/Broadcom/Bcm283x/AcpiTables/Pep.c | 84 +
> Platform/Broadcom/Bcm283x/AcpiTables/Pep.h | 126 ++
> .../Broadcom/Bcm283x/AcpiTables/Platform.h | 82 +
> Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl | 201 ++
> Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl | 105 +
> Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl | 53 +
> Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl | 155 ++
> .../ArasanMmcHostDxe/ArasanMmcHostDxe.c | 730 +++++++
> .../ArasanMmcHostDxe/ArasanMmcHostDxe.h | 50 +
> .../ArasanMmcHostDxe/ArasanMmcHostDxe.inf | 53 +
> .../Bcm2836InterruptDxe/Bcm2836InterruptDxe.c | 367 ++++
> .../Bcm2836InterruptDxe.inf | 48 +
> .../Bcm283x/Drivers/ConfigDxe/ConfigDxe.c | 356 ++++
> .../Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf | 81 +
> .../Drivers/ConfigDxe/ConfigDxeFormSetGuid.h | 23 +
> .../Drivers/ConfigDxe/ConfigDxeHii.uni | 100 +
> .../Drivers/ConfigDxe/ConfigDxeHii.vfr | 306 +++
> .../Drivers/DisplayDxe/ComponentName.c | 222 ++
> .../Bcm283x/Drivers/DisplayDxe/DisplayDxe.c | 606 ++++++
> .../Bcm283x/Drivers/DisplayDxe/DisplayDxe.h | 43 +
> .../Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf | 71 +
> .../Bcm283x/Drivers/DisplayDxe/Screenshot.c | 379 ++++
> .../GraphicsConsoleDxe/ComponentName.c | 183 ++
> .../GraphicsConsoleDxe/GraphicsConsole.c | 1836 +++++++++++++++++
> .../GraphicsConsoleDxe/GraphicsConsole.h | 591 ++++++
> .../GraphicsConsoleDxe/GraphicsConsoleDxe.inf | 74 +
> .../GraphicsConsoleDxe/GraphicsConsoleDxe.uni | 19 +
> .../GraphicsConsoleDxeExtra.uni | 20 +
> .../Drivers/GraphicsConsoleDxe/NewFont.c | 288 +++
> .../Bcm283x/Drivers/PiMmcDxe/ComponentName.c | 163 ++
> .../Bcm283x/Drivers/PiMmcDxe/Diagnostics.c | 256 +++
> .../Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c | 458 ++++
> .../Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h | 533 +++++
> .../Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c | 473 +++++
> .../Bcm283x/Drivers/PiMmcDxe/MmcDebug.c | 169 ++
> .../Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf | 58 +
> .../Drivers/PiMmcDxe/MmcIdentification.c | 993 +++++++++
> .../PlatformSmbiosDxe/PlatformSmbiosDxe.c | 915 ++++++++
> .../PlatformSmbiosDxe/PlatformSmbiosDxe.inf | 56 +
> .../Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c | 370 ++++
> .../Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf | 53 +
> .../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 1085 ++++++++++
> .../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf | 49 +
> .../Bcm283x/Drivers/SdHostDxe/SdHostDxe.c | 830 ++++++++
> .../Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf | 54 +
> .../Drivers/VarBlockServiceDxe/FileIo.c | 196 ++
> .../Drivers/VarBlockServiceDxe/FvbInfo.c | 118 ++
> .../VarBlockServiceDxe/VarBlockService.c | 984 +++++++++
> .../VarBlockServiceDxe/VarBlockService.h | 217 ++
> .../VarBlockServiceDxe/VarBlockServiceDxe.c | 334 +++
> .../VarBlockServiceDxe/VarBlockServiceDxe.inf | 93 +
> .../Include/IndustryStandard/Bcm2836.h | 70 +
> .../Include/IndustryStandard/Bcm2836MmcHs.h | 199 ++
> .../Include/IndustryStandard/Bcm2836SdHost.h | 92 +
> .../Include/IndustryStandard/Bcm2837Gpio.h | 50 +
> .../Include/IndustryStandard/RpiFirmware.h | 93 +
> .../Bcm283x/Include/Library/GpioLib.h | 33 +
> .../Broadcom/Bcm283x/Include/Protocol/DwUsb.h | 53 +
> .../Include/Protocol/ExtendedTextOut.h | 36 +
> .../Bcm283x/Include/Protocol/PiMmcHost.h | 187 ++
> .../Include/Protocol/RaspberryPiFirmware.h | 131 ++
> Platform/Broadcom/Bcm283x/Include/Utils.h | 33 +
> .../Bcm283x/Library/GpioLib/GpioLib.c | 79 +
> .../Bcm283x/Library/GpioLib/GpioLib.inf | 39 +
> .../MemoryInitPeiLib/MemoryInitPeiLib.c | 183 ++
> .../MemoryInitPeiLib/MemoryInitPeiLib.inf | 51 +
> .../PlatformBootManagerLib/PlatformBm.c | 831 ++++++++
> .../PlatformBootManagerLib/PlatformBm.h | 60 +
> .../PlatformBootManagerLib.inf | 90 +
> .../AArch64/RaspberryPiHelper.S | 107 +
> .../RaspberryPiPlatformLib/RaspberryPi.c | 99 +
> .../RaspberryPiPlatformLib/RaspberryPiMem.c | 160 ++
> .../RaspberryPiPlatformLib.inf | 64 +
> .../Bcm283x/Library/ResetLib/ResetLib.c | 104 +
> .../Bcm283x/Library/ResetLib/ResetLib.inf | 46 +
> .../VirtualRealTimeClockLib.c | 222 ++
> .../VirtualRealTimeClockLib.inf | 43 +
> Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec | 63 +
> Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc | 636 ++++++
> Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf | 450 ++++
> Platform/Broadcom/Bcm283x/Readme.md | 263 +++
> 89 files changed, 21452 insertions(+)
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/AcpiTables.inf
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Csrt.aslc
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Dbg2.aslc
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Dsdt.asl
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Fadt.aslc
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Gtdt.aslc
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Madt.aslc
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Pep.asl
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Pep.c
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Pep.h
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Platform.h
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Rhpx.asl
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Sdhc.asl
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Spcr.asl
> create mode 100644 Platform/Broadcom/Bcm283x/AcpiTables/Uart.asl
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ArasanMmcHostDxe/ArasanMmcHostDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeFormSetGuid.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.uni
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/ConfigDxe/ConfigDxeHii.vfr
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/ComponentName.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/DisplayDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DisplayDxe/Screenshot.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/ComponentName.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsole.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxe.uni
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/GraphicsConsoleDxeExtra.uni
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/GraphicsConsoleDxe/NewFont.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/ComponentName.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Diagnostics.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/Mmc.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcBlockIo.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDebug.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PiMmcDxe/MmcIdentification.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFdtDxe/RpiFdtDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/SdHostDxe/SdHostDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836MmcHs.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836SdHost.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2837Gpio.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/IndustryStandard/RpiFirmware.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/Library/GpioLib.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/DwUsb.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/ExtendedTextOut.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/PiMmcHost.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/Protocol/RaspberryPiFirmware.h
> create mode 100644 Platform/Broadcom/Bcm283x/Include/Utils.h
> create mode 100644 Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.c
> create mode 100644 Platform/Broadcom/Bcm283x/Library/GpioLib/GpioLib.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
> create mode 100644 Platform/Broadcom/Bcm283x/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.c
> create mode 100644 Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBm.h
> create mode 100644 Platform/Broadcom/Bcm283x/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/AArch64/RaspberryPiHelper.S
> create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPi.c
> create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiMem.c
> create mode 100644 Platform/Broadcom/Bcm283x/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.c
> create mode 100644 Platform/Broadcom/Bcm283x/Library/ResetLib/ResetLib.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
> create mode 100644 Platform/Broadcom/Bcm283x/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.inf
> create mode 100644 Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
> create mode 100644 Platform/Broadcom/Bcm283x/RaspberryPiPkg.dsc
> create mode 100644 Platform/Broadcom/Bcm283x/RaspberryPiPkg.fdf
> create mode 100644 Platform/Broadcom/Bcm283x/Readme.md
>
> Pete Batard (2/2):
> Platform/Broadcom: Add Raspberry Pi 3 support (non OSI)
>
> Platform/Broadcom/Bcm283x/Binary/License.txt | 26 +
> Platform/Broadcom/Bcm283x/Binary/README.md | 41 +
> Platform/Broadcom/Bcm283x/Binary/bl1.bin | Bin 0 -> 18801 bytes
> Platform/Broadcom/Bcm283x/Binary/fip.bin | Bin 0 -> 41714 bytes
> .../Broadcom/Bcm283x/DeviceTree/License.txt | 340 ++++
> .../DeviceTree/bcm2710-rpi-3-b-plus.dtb | Bin 0 -> 25617 bytes
> .../DeviceTree/bcm2710-rpi-3-b-plus.dts | 1263 +++++++++++++
> .../Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb | Bin 0 -> 25354 bytes
> .../Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts | 1259 +++++++++++++
> .../Drivers/DwUsbHostDxe/ComponentName.c | 219 +++
> .../Drivers/DwUsbHostDxe/DriverBinding.c | 269 +++
> .../Drivers/DwUsbHostDxe/DwUsbHostDxe.c | 1644 +++++++++++++++++
> .../Drivers/DwUsbHostDxe/DwUsbHostDxe.h | 159 ++
> .../Drivers/DwUsbHostDxe/DwUsbHostDxe.inf | 52 +
> .../Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h | 782 ++++++++
> .../Bcm283x/Drivers/DwUsbHostDxe/License.txt | 340 ++++
> .../Broadcom/Bcm283x/Drivers/Logo/License.txt | 10 +
> .../Broadcom/Bcm283x/Drivers/Logo/Logo.bmp | Bin 0 -> 185398 bytes
> Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c | 159 ++
> .../Broadcom/Bcm283x/Drivers/Logo/Logo.eps | Bin 0 -> 250982 bytes
> .../Broadcom/Bcm283x/Drivers/Logo/Logo.idf | 18 +
> .../Broadcom/Bcm283x/Drivers/Logo/Logo.inf | 34 +
> .../Broadcom/Bcm283x/Drivers/Logo/Logo.uni | 20 +
> .../Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf | 63 +
> .../Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni | 19 +
> .../Bcm283x/Drivers/Logo/LogoDxeExtra.uni | 19 +
> .../Bcm283x/Drivers/Logo/LogoExtra.uni | 19 +
> 27 files changed, 6755 insertions(+)
> create mode 100644 Platform/Broadcom/Bcm283x/Binary/License.txt
> create mode 100644 Platform/Broadcom/Bcm283x/Binary/README.md
> create mode 100644 Platform/Broadcom/Bcm283x/Binary/bl1.bin
> create mode 100644 Platform/Broadcom/Bcm283x/Binary/fip.bin
> create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/License.txt
> create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dtb
> create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b-plus.dts
> create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dtb
> create mode 100644 Platform/Broadcom/Bcm283x/DeviceTree/bcm2710-rpi-3-b.dts
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/ComponentName.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DriverBinding.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwUsbHostDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/DwcHw.h
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/DwUsbHostDxe/License.txt
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/License.txt
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.bmp
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.c
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.eps
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.idf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/Logo.uni
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.inf
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxe.uni
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoDxeExtra.uni
> create mode 100644 Platform/Broadcom/Bcm283x/Drivers/Logo/LogoExtra.uni
>
> --
> 2.17.0.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support
2018-12-07 14:08 ` [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Ard Biesheuvel
@ 2018-12-07 14:33 ` Pete Batard
2018-12-07 14:39 ` Ard Biesheuvel
0 siblings, 1 reply; 6+ messages in thread
From: Pete Batard @ 2018-12-07 14:33 UTC (permalink / raw)
To: Ard Biesheuvel; +Cc: edk2-devel@lists.01.org
Hi Ard,
On 2018.12.07 14:08, Ard Biesheuvel wrote:
> On Fri, 7 Dec 2018 at 13:13, Pete Batard <pete@akeo.ie> wrote:
>>
>> Preamble:
>>
>> Because of its price point, ease of use and availability, the Raspberry Pi is
>> undeniably one of the most successful ARM platform in existence today. Its
>> widespread adoption therefore makes it a perfect fit as an EDK2 platform.
>>
>> However, up until now, the Raspberry Pi hasn't been supported as a bona fide
>> platform in our repository. This series of patches remedies that by introducing
>> the Raspberry Pi 3 Model B and Model B+ as a viable EDK2 platforms.
>>
>
> Thanks Pete, this is excellent work
Well, most of it is based on your initial work for that platform... ;)
>> Patch Breakdown:
>>
>> Since this is a platform introduction, we simply chose to break the commits
>> into edk2-platforms and edk2-non-osi components, as we see little point in
>> splitting the series into further subcomponents, when the structure would be
>> similar to the overall subdirectory layout and of course, one needs to apply
>> all components at once to be able to test the firmware.
>>
>
> You will have to split it up, or i won't be able to review it.
Do you have a preference with regards to breaking it down?
Would a 4-way ACPI / Drivers / Library / Non-OSI work for you, or do you
want to go more fine grained?
I'm not sure what will make the reviewing process easier, so if you have
guidance as to how you'd prefer to see things split, I'll take it.
> BTW I managed to build the code with GCC 6 just fine - are you sure
> the GCC 5.5 limitation still exists?
Well, the problem we've seen isn't with building the firmware itself,
but with getting sporadic (but not systematic) Synchronous Exceptions
during early boot, when using GCC 6 or later.
After switching to GCC 5.5, I have not seen any of these exceptions
occur, so, even if we have applied other changes that may have helped
since, I prefer erring on the side of caution for the time being...
Regards,
/Pete
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support
2018-12-07 14:33 ` Pete Batard
@ 2018-12-07 14:39 ` Ard Biesheuvel
0 siblings, 0 replies; 6+ messages in thread
From: Ard Biesheuvel @ 2018-12-07 14:39 UTC (permalink / raw)
To: Pete Batard; +Cc: edk2-devel@lists.01.org
On Fri, 7 Dec 2018 at 15:33, Pete Batard <pete@akeo.ie> wrote:
>
> Hi Ard,
>
> On 2018.12.07 14:08, Ard Biesheuvel wrote:
> > On Fri, 7 Dec 2018 at 13:13, Pete Batard <pete@akeo.ie> wrote:
> >>
> >> Preamble:
> >>
> >> Because of its price point, ease of use and availability, the Raspberry Pi is
> >> undeniably one of the most successful ARM platform in existence today. Its
> >> widespread adoption therefore makes it a perfect fit as an EDK2 platform.
> >>
> >> However, up until now, the Raspberry Pi hasn't been supported as a bona fide
> >> platform in our repository. This series of patches remedies that by introducing
> >> the Raspberry Pi 3 Model B and Model B+ as a viable EDK2 platforms.
> >>
> >
> > Thanks Pete, this is excellent work
>
> Well, most of it is based on your initial work for that platform... ;)
>
That was just the easy part :-)
> >> Patch Breakdown:
> >>
> >> Since this is a platform introduction, we simply chose to break the commits
> >> into edk2-platforms and edk2-non-osi components, as we see little point in
> >> splitting the series into further subcomponents, when the structure would be
> >> similar to the overall subdirectory layout and of course, one needs to apply
> >> all components at once to be able to test the firmware.
> >>
> >
> > You will have to split it up, or i won't be able to review it.
>
> Do you have a preference with regards to breaking it down?
>
> Would a 4-way ACPI / Drivers / Library / Non-OSI work for you, or do you
> want to go more fine grained?
>
Each module as a separate patch, preferably, and a patch that adds the
.dsc/.fdf at the end.
> I'm not sure what will make the reviewing process easier, so if you have
> guidance as to how you'd prefer to see things split, I'll take it.
>
Well, I want to be able to reply inline in my email client, and a
22000 line patch does not let me do that ...
> > BTW I managed to build the code with GCC 6 just fine - are you sure
> > the GCC 5.5 limitation still exists?
>
> Well, the problem we've seen isn't with building the firmware itself,
> but with getting sporadic (but not systematic) Synchronous Exceptions
> during early boot, when using GCC 6 or later.
>
> After switching to GCC 5.5, I have not seen any of these exceptions
> occur, so, even if we have applied other changes that may have helped
> since, I prefer erring on the side of caution for the time being...
>
Yikes. So no meaningful backtraces were produced that narrow it down?
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-12-07 14:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-07 12:05 [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Pete Batard
2018-12-07 12:05 ` [PATCH v1 edk2-platfoms 1/2] " Pete Batard
2018-12-07 12:05 ` [PATCH v1 edk2-platfoms 2/2] Platform/Broadcom: Add Raspberry Pi 3 support (non OSI) Pete Batard
2018-12-07 14:08 ` [PATCH v1 edk2-platfoms 0/2] Platform/Broadcom: Add Raspberry Pi 3 support Ard Biesheuvel
2018-12-07 14:33 ` Pete Batard
2018-12-07 14:39 ` Ard Biesheuvel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox