From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>,
"Zeng, Star" <star.zeng@intel.com>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Leif Lindholm <leif.lindholm@linaro.org>,
Ruiyu Ni <ruiyu.ni@intel.com>
Subject: Re: [PATCH 3/3] MdeModulePkg/NonDiscoverablePciDeviceDxe: add missing validation
Date: Fri, 7 Sep 2018 12:36:32 +0200 [thread overview]
Message-ID: <CAKv+Gu9=0anOhuQjvbwOjevdvf9gHbgaoTwU907fP0eP17HJYw@mail.gmail.com> (raw)
In-Reply-To: <bfae1968b4e0d3bb6a4f249dc57cc1716ff6e2c7.1536260010.git.vladimir.olovyannikov@broadcom.com>
On 6 September 2018 at 20:55, Vladimir Olovyannikov
<vladimir.olovyannikov@broadcom.com> wrote:
> UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
> required checks were not performed. Perform parameters validation in
> NonDiscoverablePciDeviceDxe.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> .../NonDiscoverablePciDeviceIo.c | 50 ++++++++++++++++++-
> 1 file changed, 49 insertions(+), 1 deletion(-)
>
> diff --git a/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c b/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c
> index 0e42ae4bf6ec..07118d59fd68 100644
> --- a/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c
> +++ b/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceIo.c
> @@ -52,6 +52,10 @@ GetBarResource (
>
> BarIndex -= (UINT8)Dev->BarOffset;
>
> + if (BarIndex >= Dev->BarCount) {
> + return EFI_UNSUPPORTED;
> + }
> +
> for (Desc = Dev->Device->Resources;
> Desc->Desc != ACPI_END_TAG_DESCRIPTOR;
> Desc = (VOID *)((UINT8 *)Desc + Desc->Len + 3)) {
> @@ -597,6 +601,19 @@ CoherentPciIoMap (
> EFI_STATUS Status;
> NON_DISCOVERABLE_PCI_DEVICE_MAP_INFO *MapInfo;
>
> + if (Operation != EfiPciIoOperationBusMasterRead &&
> + Operation != EfiPciIoOperationBusMasterWrite &&
> + Operation != EfiPciIoOperationBusMasterCommonBuffer) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (HostAddress == NULL ||
> + NumberOfBytes == NULL ||
> + DeviceAddress == NULL ||
> + Mapping == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> //
> // If HostAddress exceeds 4 GB, and this device does not support 64-bit DMA
> // addressing, we need to allocate a bounce buffer and copy over the data.
> @@ -720,6 +737,11 @@ CoherentPciIoAllocateBuffer (
> return EFI_UNSUPPORTED;
> }
>
> + if ((MemoryType != EfiBootServicesData) &&
> + (MemoryType != EfiRuntimeServicesData)) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> //
> // Allocate below 4 GB if the dual address cycle attribute has not
> // been set. If the system has no memory available below 4 GB, there
> @@ -877,6 +899,10 @@ NonCoherentPciIoAllocateBuffer (
> NON_DISCOVERABLE_DEVICE_UNCACHED_ALLOCATION *Alloc;
> VOID *AllocAddress;
>
> + if (HostAddress == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
>
> Status = CoherentPciIoAllocateBuffer (This, Type, MemoryType, Pages,
> @@ -995,6 +1021,19 @@ NonCoherentPciIoMap (
> EFI_GCD_MEMORY_SPACE_DESCRIPTOR GcdDescriptor;
> BOOLEAN Bounce;
>
> + if (HostAddress == NULL ||
> + NumberOfBytes == NULL ||
> + DeviceAddress == NULL ||
> + Mapping == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (Operation != EfiPciIoOperationBusMasterRead &&
> + Operation != EfiPciIoOperationBusMasterWrite &&
> + Operation != EfiPciIoOperationBusMasterCommonBuffer) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> MapInfo = AllocatePool (sizeof *MapInfo);
> if (MapInfo == NULL) {
> return EFI_OUT_OF_RESOURCES;
> @@ -1228,8 +1267,17 @@ PciIoAttributes (
> NON_DISCOVERABLE_PCI_DEVICE *Dev;
> BOOLEAN Enable;
>
> + #define DEV_SUPPORTED_ATTRIBUTES \
> + (EFI_PCI_DEVICE_ENABLE | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE)
> +
> Dev = NON_DISCOVERABLE_PCI_DEVICE_FROM_PCI_IO(This);
>
> + if (Attributes) {
> + if ((Attributes & (~(DEV_SUPPORTED_ATTRIBUTES))) != 0) {
> + return EFI_UNSUPPORTED;
> + }
> + }
> +
> Enable = FALSE;
> switch (Operation) {
> case EfiPciIoAttributeOperationGet:
> @@ -1243,7 +1291,7 @@ PciIoAttributes (
> if (Result == NULL) {
> return EFI_INVALID_PARAMETER;
> }
> - *Result = EFI_PCI_DEVICE_ENABLE | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE;
> + *Result = DEV_SUPPORTED_ATTRIBUTES;
> break;
>
> case EfiPciIoAttributeOperationEnable:
> --
> 2.18.0
>
next prev parent reply other threads:[~2018-09-07 10:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-06 18:55 [PATCH 1/3] EmbeddedPkg/CoherentDmaLib: Fix typo in DmaAlignedBuffer Vladimir Olovyannikov
2018-09-06 18:55 ` [PATCH 2/3] EmbeddedPkg/CoherentDmaLib: Add missing checks to DmaMap Vladimir Olovyannikov
2018-09-06 18:55 ` [PATCH 3/3] MdeModulePkg/NonDiscoverablePciDeviceDxe: add missing validation Vladimir Olovyannikov
2018-09-07 10:36 ` Ard Biesheuvel [this message]
2018-12-15 13:36 ` Leif Lindholm
2018-12-17 0:16 ` Wang, Jian J
2018-12-17 0:59 ` Wang, Jian J
2018-09-07 10:37 ` [PATCH 1/3] EmbeddedPkg/CoherentDmaLib: Fix typo in DmaAlignedBuffer Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAKv+Gu9=0anOhuQjvbwOjevdvf9gHbgaoTwU907fP0eP17HJYw@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox