From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: "Zeng, Star" <star.zeng@intel.com>,
Eric Dong <eric.dong@intel.com>,
"Ni, Ruiyu" <ruiyu.ni@intel.com>,
edk2-devel-01 <edk2-devel@lists.01.org>,
"Tian, Feng" <feng.tian@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
Leif Lindholm <leif.lindholm@linaro.org>,
"Wu, Hao A" <hao.a.wu@intel.com>,
Nadav Haklai <nadavh@marvell.com>,
"jsd@semihalf.com" <jsd@semihalf.com>,
Tomasz Michalec <tm@semihalf.com>
Subject: Re: [PATCH v2 2/4] MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocol
Date: Mon, 8 Oct 2018 15:07:20 +0200 [thread overview]
Message-ID: <CAKv+Gu_4jfZk-CYr57oN28jBRDgjpS1FSM-_aasAvo4+kNALYg@mail.gmail.com> (raw)
In-Reply-To: <CAPv3WKeeOo3srrtMf2dfamL5tha=hZFKrbh3u4BRJi3FPdK-uw@mail.gmail.com>
On 8 October 2018 at 14:59, Marcin Wojtas <mw@semihalf.com> wrote:
> Hi Ard,
>
> pon., 8 paź 2018 o 14:41 Ard Biesheuvel <ard.biesheuvel@linaro.org> napisał(a):
>>
>> (add MdeModulePkg maintainers)
>>
>> On 5 October 2018 at 15:25, Marcin Wojtas <mw@semihalf.com> wrote:
>> > From: Tomasz Michalec <tm@semihalf.com>
>> >
>> > Some SD Host Controlers use different values in Host Control 2 Register
>> > to select UHS Mode. This patch adds a new UhsSignaling type routine to
>> > the NotifyPhase of the SdMmcOverride protocol.
>> >
>> > UHS signaling configuration is moved to a common, default routine
>> > (SdMmcHcUhsSignaling), which is called when SdMmcOverride does not
>> > cover this functionality.
>> >
>> > Contributed-under: TianoCore Contribution Agreement 1.1
>> > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
>> > ---
>> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h | 50 +++++++
>> > MdeModulePkg/Include/Protocol/SdMmcOverride.h | 2 +
>> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c | 153 ++++++++++++--------
>> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 37 +++--
>> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c | 69 +++++++++
>> > 5 files changed, 243 insertions(+), 68 deletions(-)
>> >
>> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h
>> > index e389d52..a03160d 100644
>> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h
>> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h
>> > @@ -63,6 +63,39 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> > #define SD_MMC_HC_CTRL_VER 0xFE
>> >
>> > //
>> > +// SD Host Controler bits to HOST_CTRL2 register
>> > +//
>> > +#define SD_MMC_HC_CTRL_UHS_MASK 0x0007
>> > +#define SD_MMC_HC_CTRL_UHS_SDR12 0x0000
>> > +#define SD_MMC_HC_CTRL_UHS_SDR25 0x0001
>> > +#define SD_MMC_HC_CTRL_UHS_SDR50 0x0002
>> > +#define SD_MMC_HC_CTRL_UHS_SDR104 0x0003
>> > +#define SD_MMC_HC_CTRL_UHS_DDR50 0x0004
>> > +#define SD_MMC_HC_CTRL_MMC_DDR52 0x0004
>> > +#define SD_MMC_HC_CTRL_MMC_SDR50 0x0002
>> > +#define SD_MMC_HC_CTRL_MMC_SDR25 0x0001
>> > +#define SD_MMC_HC_CTRL_MMC_SDR12 0x0000
>> > +#define SD_MMC_HC_CTRL_HS200 0x0003
>> > +#define SD_MMC_HC_CTRL_HS400 0x0005
>> > +
>> > +//
>> > +// Timing modes for uhs
>> > +//
>> > +typedef enum {
>> > + SdMmcUhsSdr12,
>> > + SdMmcUhsSdr25,
>> > + SdMmcUhsSdr50,
>> > + SdMmcUhsSdr104,
>> > + SdMmcUhsDdr50,
>> > + SdMmcMmcDdr52,
>> > + SdMmcMmcSdr50,
>> > + SdMmcMmcSdr25,
>> > + SdMmcMmcSdr12,
>> > + SdMmcMmcHs200,
>> > + SdMmcMmcHs400,
>> > +} SD_MMC_UHS_TIMING;
>> > +
>>
>> Here, we end up with two sets of symbolic constants for the same
>> thing, and I suppose this enum will be duplicated in your
>> SdMmcOverride implementation?
>>
>
> Why duplicated? Macros are for generic UHS_MODE_SEL field values for
> SD and MMC in HostControl2Register.
>
> SD_MMC_UHS_TIMING is just a timing mode indicator, it can be used not
> only in UhsSignaling routine (actually the next patch, with
> SwitchClockFreqPost, use it...).
>
> In my SdMmcOverride implementation this enum is not duplicated,
> because this file (SdMmcPciHci.h) is included via
> Protocol/SdMmcOverride.h.
>
Ah ok. Please don't expose internal headers of the SD/MMC driver via
Protocol/SdMmcOverride.h
I think it should be fine to add the enum definition to
Protocol/SdMmcOverride.h instead.
But wouldn't it be much easier to have a hook for setting
HostControl2Register that decodes the value and modifies it according
to what the platform requires?
>>
>>
>> > +//
>> > // The transfer modes supported by SD Host Controller
>> > // Simplified Spec 3.0 Table 1-2
>> > //
>> > @@ -508,4 +541,21 @@ SdMmcHcInitTimeoutCtrl (
>> > IN UINT8 Slot
>> > );
>> >
>> > +/**
>> > + Set SD Host Controler control 2 registry according to selected speed.
>> > +
>> > + @param[in] PciIo The PCI IO protocol instance.
>> > + @param[in] Slot The slot number of the SD card to send the command to.
>> > + @param[in] Timing The timing to select.
>> > +
>> > + @retval EFI_SUCCESS The timing is set successfully.
>> > + @retval Others The timing isn't set successfully.
>> > +**/
>> > +EFI_STATUS
>> > +SdMmcHcUhsSignaling (
>> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
>> > + IN UINT8 Slot,
>> > + IN SD_MMC_UHS_TIMING Timing
>> > + );
>> > +
>> > #endif
>> > diff --git a/MdeModulePkg/Include/Protocol/SdMmcOverride.h b/MdeModulePkg/Include/Protocol/SdMmcOverride.h
>> > index 178945f..25db98a 100644
>> > --- a/MdeModulePkg/Include/Protocol/SdMmcOverride.h
>> > +++ b/MdeModulePkg/Include/Protocol/SdMmcOverride.h
>> > @@ -17,6 +17,7 @@
>> > #ifndef __SD_MMC_OVERRIDE_H__
>> > #define __SD_MMC_OVERRIDE_H__
>> >
>> > +#include <Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h>
>> > #include <Protocol/SdMmcPassThru.h>
>> >
>> > #define EDKII_SD_MMC_OVERRIDE_PROTOCOL_GUID \
>> > @@ -31,6 +32,7 @@ typedef enum {
>> > EdkiiSdMmcResetPost,
>> > EdkiiSdMmcInitHostPre,
>> > EdkiiSdMmcInitHostPost,
>> > + EdkiiSdMmcUhsSignaling,
>> > } EDKII_SD_MMC_PHASE_TYPE;
>> >
>> > /**
>> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
>> > index c5fd214..05bd4a0 100755
>> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
>> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
>> > @@ -740,10 +740,13 @@ EmmcSwitchToHighSpeed (
>> > IN UINT8 BusWidth
>> > )
>> > {
>> > - EFI_STATUS Status;
>> > - UINT8 HsTiming;
>> > - UINT8 HostCtrl1;
>> > - UINT8 HostCtrl2;
>> > + EFI_STATUS Status;
>> > + UINT8 HsTiming;
>> > + UINT8 HostCtrl1;
>> > + SD_MMC_UHS_TIMING Timing;
>> > + SD_MMC_HC_PRIVATE_DATA *Private;
>> > +
>> > + Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
>> >
>> > Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, IsDdr, BusWidth);
>> > if (EFI_ERROR (Status)) {
>> > @@ -758,27 +761,37 @@ EmmcSwitchToHighSpeed (
>> > return Status;
>> > }
>> >
>> > - //
>> > - // Clean UHS Mode Select field of Host Control 2 reigster before update
>> > - //
>> > - HostCtrl2 = (UINT8)~0x7;
>> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > - }
>> > - //
>> > - // Set UHS Mode Select field of Host Control 2 reigster to SDR12/25/50
>> > - //
>> > if (IsDdr) {
>> > - HostCtrl2 = BIT2;
>> > + Timing = SdMmcMmcDdr52;
>> > } else if (ClockFreq == 52) {
>> > - HostCtrl2 = BIT0;
>> > + Timing = SdMmcMmcSdr50;
>> > + } else if (ClockFreq == 26) {
>> > + Timing = SdMmcMmcSdr25;
>> > } else {
>> > - HostCtrl2 = 0;
>> > + Timing = SdMmcMmcSdr12;
>> > }
>> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > +
>> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
>> > + Status = mOverride->NotifyPhase (
>> > + Private->ControllerHandle,
>> > + Slot,
>> > + EdkiiSdMmcUhsSignaling,
>> > + &Timing
>> > + );
>> > + if (EFI_ERROR (Status)) {
>> > + DEBUG ((
>> > + DEBUG_ERROR,
>> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
>> > + __FUNCTION__,
>> > + Status
>> > + ));
>> > + return Status;
>> > + }
>> > + } else {
>> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
>> > + if (EFI_ERROR (Status)) {
>> > + return Status;
>> > + }
>> > }
>> >
>> > HsTiming = 1;
>> > @@ -814,10 +827,13 @@ EmmcSwitchToHS200 (
>> > IN UINT8 BusWidth
>> > )
>> > {
>> > - EFI_STATUS Status;
>> > - UINT8 HsTiming;
>> > - UINT8 HostCtrl2;
>> > - UINT16 ClockCtrl;
>> > + EFI_STATUS Status;
>> > + UINT8 HsTiming;
>> > + UINT16 ClockCtrl;
>> > + SD_MMC_UHS_TIMING Timing;
>> > + SD_MMC_HC_PRIVATE_DATA *Private;
>> > +
>> > + Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
>> >
>> > if ((BusWidth != 4) && (BusWidth != 8)) {
>> > return EFI_INVALID_PARAMETER;
>> > @@ -837,21 +853,30 @@ EmmcSwitchToHS200 (
>> > if (EFI_ERROR (Status)) {
>> > return Status;
>> > }
>> > - //
>> > - // Clean UHS Mode Select field of Host Control 2 reigster before update
>> > - //
>> > - HostCtrl2 = (UINT8)~0x7;
>> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > - }
>> > - //
>> > - // Set UHS Mode Select field of Host Control 2 reigster to SDR104
>> > - //
>> > - HostCtrl2 = BIT0 | BIT1;
>> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > +
>> > + Timing = SdMmcMmcHs200;
>> > +
>> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
>> > + Status = mOverride->NotifyPhase (
>> > + Private->ControllerHandle,
>> > + Slot,
>> > + EdkiiSdMmcUhsSignaling,
>> > + &Timing
>> > + );
>> > + if (EFI_ERROR (Status)) {
>> > + DEBUG ((
>> > + DEBUG_ERROR,
>> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
>> > + __FUNCTION__,
>> > + Status
>> > + ));
>> > + return Status;
>> > + }
>> > + } else {
>> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
>> > + if (EFI_ERROR (Status)) {
>> > + return Status;
>> > + }
>> > }
>> > //
>> > // Wait Internal Clock Stable in the Clock Control register to be 1 before set SD Clock Enable bit
>> > @@ -910,9 +935,12 @@ EmmcSwitchToHS400 (
>> > IN UINT32 ClockFreq
>> > )
>> > {
>> > - EFI_STATUS Status;
>> > - UINT8 HsTiming;
>> > - UINT8 HostCtrl2;
>> > + EFI_STATUS Status;
>> > + UINT8 HsTiming;
>> > + SD_MMC_UHS_TIMING Timing;
>> > + SD_MMC_HC_PRIVATE_DATA *Private;
>> > +
>> > + Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
>> >
>> > Status = EmmcSwitchToHS200 (PciIo, PassThru, Slot, Rca, ClockFreq, 8);
>> > if (EFI_ERROR (Status)) {
>> > @@ -933,21 +961,30 @@ EmmcSwitchToHS400 (
>> > if (EFI_ERROR (Status)) {
>> > return Status;
>> > }
>> > - //
>> > - // Clean UHS Mode Select field of Host Control 2 reigster before update
>> > - //
>> > - HostCtrl2 = (UINT8)~0x7;
>> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > - }
>> > - //
>> > - // Set UHS Mode Select field of Host Control 2 reigster to HS400
>> > - //
>> > - HostCtrl2 = BIT0 | BIT2;
>> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > +
>> > + Timing = SdMmcMmcHs400;
>> > +
>> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
>> > + Status = mOverride->NotifyPhase (
>> > + Private->ControllerHandle,
>> > + Slot,
>> > + EdkiiSdMmcUhsSignaling,
>> > + &Timing
>> > + );
>> > + if (EFI_ERROR (Status)) {
>> > + DEBUG ((
>> > + DEBUG_ERROR,
>> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
>> > + __FUNCTION__,
>> > + Status
>> > + ));
>> > + return Status;
>> > + }
>> > + } else {
>> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
>> > + if (EFI_ERROR (Status)) {
>> > + return Status;
>> > + }
>> > }
>> >
>> > HsTiming = 3;
>> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
>> > index 8c93933..5645a71 100644
>> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
>> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
>> > @@ -784,8 +784,8 @@ SdCardSetBusMode (
>> > UINT8 BusWidth;
>> > UINT8 AccessMode;
>> > UINT8 HostCtrl1;
>> > - UINT8 HostCtrl2;
>> > UINT8 SwitchResp[64];
>> > + SD_MMC_UHS_TIMING Timing;
>> > SD_MMC_HC_PRIVATE_DATA *Private;
>> >
>> > Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
>> > @@ -817,18 +817,23 @@ SdCardSetBusMode (
>> > if (S18A && (Capability->Sdr104 != 0) && ((SwitchResp[13] & BIT3) != 0)) {
>> > ClockFreq = 208;
>> > AccessMode = 3;
>> > + Timing = SdMmcUhsSdr104;
>> > } else if (S18A && (Capability->Sdr50 != 0) && ((SwitchResp[13] & BIT2) != 0)) {
>> > ClockFreq = 100;
>> > AccessMode = 2;
>> > + Timing = SdMmcUhsSdr50;
>> > } else if (S18A && (Capability->Ddr50 != 0) && ((SwitchResp[13] & BIT4) != 0)) {
>> > ClockFreq = 50;
>> > AccessMode = 4;
>> > + Timing = SdMmcUhsDdr50;
>> > } else if ((SwitchResp[13] & BIT1) != 0) {
>> > ClockFreq = 50;
>> > AccessMode = 1;
>> > + Timing = SdMmcUhsSdr25;
>> > } else {
>> > ClockFreq = 25;
>> > AccessMode = 0;
>> > + Timing = SdMmcUhsSdr12;
>> > }
>> >
>> > Status = SdCardSwitch (PassThru, Slot, AccessMode, 0xF, 0xF, 0xF, TRUE, SwitchResp);
>> > @@ -854,15 +859,27 @@ SdCardSetBusMode (
>> > }
>> > }
>> >
>> > - HostCtrl2 = (UINT8)~0x7;
>> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > - }
>> > - HostCtrl2 = AccessMode;
>> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > - if (EFI_ERROR (Status)) {
>> > - return Status;
>> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
>> > + Status = mOverride->NotifyPhase (
>> > + Private->ControllerHandle,
>> > + Slot,
>> > + EdkiiSdMmcUhsSignaling,
>> > + &Timing
>> > + );
>> > + if (EFI_ERROR (Status)) {
>> > + DEBUG ((
>> > + DEBUG_ERROR,
>> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
>> > + __FUNCTION__,
>> > + Status
>> > + ));
>> > + return Status;
>> > + }
>> > + } else {
>> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
>> > + if (EFI_ERROR (Status)) {
>> > + return Status;
>> > + }
>> > }
>> >
>> > Status = SdMmcHcClockSupply (PciIo, Slot, ClockFreq * 1000, *Capability);
>> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
>> > index 02eb4ad..38d6202 100644
>> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
>> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
>> > @@ -1137,6 +1137,75 @@ SdMmcHcInitHost (
>> > }
>> >
>> > /**
>> > + Set SD Host Controler control 2 registry according to selected speed.
>> > +
>> > + @param[in] PciIo The PCI IO protocol instance.
>> > + @param[in] Slot The slot number of the SD card to send the command to.
>> > + @param[in] Timing The timing to select.
>> > +
>> > + @retval EFI_SUCCESS The timing is set successfully.
>> > + @retval Others The timing isn't set successfully.
>> > +**/
>> > +EFI_STATUS
>> > +SdMmcHcUhsSignaling (
>> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
>> > + IN UINT8 Slot,
>> > + IN SD_MMC_UHS_TIMING Timing
>> > + )
>> > +{
>> > + EFI_STATUS Status;
>> > + UINT8 HostCtrl2;
>> > +
>> > + HostCtrl2 = (UINT8)~SD_MMC_HC_CTRL_UHS_MASK;
>> > + Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > + if (EFI_ERROR (Status)) {
>> > + return Status;
>> > + }
>> > +
>> > + switch (Timing) {
>> > + case SdMmcUhsSdr12:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR12;
>> > + break;
>> > + case SdMmcUhsSdr25:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR25;
>> > + break;
>> > + case SdMmcUhsSdr50:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR50;
>> > + break;
>> > + case SdMmcUhsSdr104:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR104;
>> > + break;
>> > + case SdMmcUhsDdr50:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_DDR50;
>> > + break;
>> > + case SdMmcMmcDdr52:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_DDR52;
>> > + break;
>> > + case SdMmcMmcSdr50:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_SDR50;
>> > + break;
>> > + case SdMmcMmcSdr25:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_SDR25;
>> > + break;
>> > + case SdMmcMmcSdr12:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_SDR12;
>> > + break;
>> > + case SdMmcMmcHs200:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_HS200;
>> > + break;
>> > + case SdMmcMmcHs400:
>> > + HostCtrl2 = SD_MMC_HC_CTRL_HS400;
>> > + break;
>> > + default:
>> > + HostCtrl2 = 0;
>> > + break;
>> > + }
>> > + Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
>> > +
>> > + return Status;
>> > +}
>> > +
>>
>> This function looks identical to the override that your are proposing
>> in your platform code. Why is that? Are the values of those defines
>> different?
>>
>
> This is exactly the reason. For Xenon, MMC_HS400 and MMC_HS200 values
> of UHS_MODE_SEL field in HostControl2Register are custom. Actually,
> non-generic UHS_MODE_SEL values are pretty common, from what I can see
> in the Linux code. The new callback allows overriding it. Looking
> forward to your feedback.
>
> Best regards,
> Marcin
next prev parent reply other threads:[~2018-10-08 13:07 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 13:25 [PATCH v2 0/4] SdMmcOverride extension Marcin Wojtas
2018-10-05 13:25 ` [PATCH v2 1/4] MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in NotifyPhase Marcin Wojtas
2018-10-08 12:21 ` Ard Biesheuvel
2018-10-05 13:25 ` [PATCH v2 2/4] MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocol Marcin Wojtas
2018-10-05 15:12 ` Philippe Mathieu-Daudé
2018-10-05 15:17 ` Marcin Wojtas
2018-10-08 12:41 ` Ard Biesheuvel
2018-10-08 12:59 ` Marcin Wojtas
2018-10-08 13:07 ` Ard Biesheuvel [this message]
2018-10-08 13:17 ` Marcin Wojtas
2018-10-08 13:27 ` Ard Biesheuvel
2018-10-08 13:37 ` Marcin Wojtas
2018-10-08 13:43 ` Ard Biesheuvel
2018-10-08 14:52 ` Marcin Wojtas
2018-10-08 15:10 ` Ard Biesheuvel
2018-10-09 11:22 ` Wu, Hao A
2018-10-09 11:32 ` Marcin Wojtas
2018-10-09 11:45 ` Ard Biesheuvel
2018-10-09 11:51 ` Marcin Wojtas
2018-10-11 15:43 ` Marcin Wojtas
2018-10-12 1:39 ` Wu, Hao A
2018-10-12 5:06 ` Marcin Wojtas
2018-10-12 15:55 ` Ard Biesheuvel
2018-10-12 16:04 ` Marcin Wojtas
2018-10-12 16:24 ` Ard Biesheuvel
2018-10-12 16:49 ` Marcin Wojtas
2018-11-01 7:04 ` Wu, Hao A
2018-11-02 8:21 ` Marcin Wojtas
2018-11-02 12:16 ` Marcin Wojtas
2018-11-03 2:57 ` Wu, Hao A
2018-10-05 13:25 ` [PATCH v2 3/4] MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to SdMmcOverride Marcin Wojtas
2018-10-08 12:44 ` Ard Biesheuvel
2018-11-01 7:06 ` Wu, Hao A
2018-11-02 9:39 ` Marcin Wojtas
2018-11-03 3:19 ` Wu, Hao A
2018-10-05 13:25 ` [PATCH v2 4/4] MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock frequency Marcin Wojtas
2018-10-08 12:49 ` Ard Biesheuvel
2018-11-01 7:11 ` Wu, Hao A
2018-11-02 9:52 ` Marcin Wojtas
2018-10-12 5:24 ` [PATCH v2 0/4] SdMmcOverride extension Wu, Hao A
2018-10-12 5:33 ` Marcin Wojtas
2018-10-12 12:48 ` Wu, Hao A
2018-10-12 12:50 ` Marcin Wojtas
2018-10-25 12:43 ` Marcin Wojtas
2018-10-26 7:22 ` Wu, Hao A
2018-11-01 7:11 ` Wu, Hao A
2018-11-02 10:09 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAKv+Gu_4jfZk-CYr57oN28jBRDgjpS1FSM-_aasAvo4+kNALYg@mail.gmail.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox