From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: Leif Lindholm <leif.lindholm@linaro.org>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Masami Hiramatsu <masami.hiramatsu@linaro.org>
Subject: Re: [PATCH edk2-platforms v2 08/23] Platform/SynQuacerEvalBoard: add PCI support
Date: Thu, 26 Oct 2017 16:41:07 +0100 [thread overview]
Message-ID: <CAKv+Gu_OoVyrj5KG_dOi7iYnywo2zRJVg4WWa5dr9j2n1zTa=A@mail.gmail.com> (raw)
In-Reply-To: <20171026153832.cb742vrzkj7eeq2s@bivouac.eciton.net>
On 26 October 2017 at 16:38, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> On Wed, Oct 25, 2017 at 06:59:32PM +0100, Ard Biesheuvel wrote:
>> Wire up the various drivers and libraries for the SynQuacerEvalBoard
>> platform. Also enable the usual PCI suspects: XHCI, SATA and NVME,
>> and the various bus, partition and file system drivers that we need
>> to make use of PCIe devices.
>>
>> Contributed-under: TianoCore Contribution Agreement 1.1
>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>
> Comments unaddressed from v1:
> - If you're folding ChaosKey driver in here (as you are) it deserves a
> mention in the commit message.
Ack
> - Is there a good reason for leaving out Uhci/Ehci?
>
No not really, other than the fact that nobody is every likely to use
it (although I suppose you could put a UHCI PCI card into a PCIe to
PCI bridge)
I will add them.
next prev parent reply other threads:[~2017-10-26 15:37 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 17:59 [PATCH edk2-platforms v2 00/23] add support for Socionext Synquacer Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 01/23] Silicon/SynQuacer: add package with platform headers Ard Biesheuvel
2017-10-26 14:39 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 02/23] Silicon/Socionext: add driver for NETSEC network controller Ard Biesheuvel
2017-10-26 14:49 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 03/23] Silicon/SynQuacer: add MemoryInitPeiLib implementation Ard Biesheuvel
2017-10-26 14:56 ` Leif Lindholm
2017-10-26 14:57 ` Ard Biesheuvel
2017-10-26 15:05 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 04/23] Platform: add support for Socionext SynQuacer eval board Ard Biesheuvel
2017-10-26 15:02 ` Leif Lindholm
2017-10-26 15:14 ` Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 05/23] Silicon/SynQuacer: implement PciSegmentLib to support dual RCs Ard Biesheuvel
2017-10-26 15:06 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 06/23] Silicon/SynQuacer: implement PciHostBridgeLib support Ard Biesheuvel
2017-10-26 15:10 ` Leif Lindholm
2017-10-26 15:12 ` Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 07/23] Silicon/SynQuacer: implement EFI_CPU_IO2_PROTOCOL Ard Biesheuvel
2017-10-26 15:13 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 08/23] Platform/SynQuacerEvalBoard: add PCI support Ard Biesheuvel
2017-10-26 15:38 ` Leif Lindholm
2017-10-26 15:41 ` Ard Biesheuvel [this message]
2017-10-26 21:49 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 09/23] Platform/SynQuacerEvalBoard: add NETSEC driver Ard Biesheuvel
2017-10-26 15:39 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 10/23] Silicon/SynQuacer: add ACPI support Ard Biesheuvel
2017-10-26 17:13 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 11/23] Silicon/SynQuacer: add device tree support for eval board Ard Biesheuvel
2017-10-26 17:15 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 12/23] Silicon/SynQuacer: add NorFlashPlatformLib implementation Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 13/23] Silicon/Socionext: add driver for SPI NOR flash Ard Biesheuvel
2017-10-26 21:19 ` Leif Lindholm
2017-10-28 14:16 ` Ard Biesheuvel
2017-10-28 21:31 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 14/23] Platform/SynQuacer: incorporate NOR flash and variable drivers Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 15/23] Silicon/SynQuacer: implement PlatformFlashAccessLib Ard Biesheuvel
2017-10-26 21:22 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 16/23] SynQuacer/SynQuacerMemoryInitPeiLib: add capsule support Ard Biesheuvel
2017-10-26 21:27 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 17/23] Socionext/SynQuacerEvalBoard: wire up basic " Ard Biesheuvel
2017-10-26 21:28 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 18/23] Socionext/SynQuacerEvalBoard: switch to execute in place Ard Biesheuvel
2017-10-26 21:30 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 19/23] Platform/SynQuacerEvalBoard: add signed capsule update support Ard Biesheuvel
2017-10-26 21:33 ` Leif Lindholm
2017-10-28 13:48 ` Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 20/23] Silicon/SynQuacer/AcpiTables: hide PCI domain #0 Ard Biesheuvel
2017-10-26 21:34 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 21/23] Silicon/SynQuacerPciHostBridgeLib: add workaround to support 32-bit only cards Ard Biesheuvel
2017-10-26 21:35 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 22/23] Platform/Socionext: add support for Socionext Developer Box rev 0.1 Ard Biesheuvel
2017-10-26 21:46 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 23/23] Platform/DeveloperBox: add ConsolePrefDxe driver Ard Biesheuvel
2017-10-26 21:46 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAKv+Gu_OoVyrj5KG_dOi7iYnywo2zRJVg4WWa5dr9j2n1zTa=A@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox