public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: Laszlo Ersek <lersek@redhat.com>
Cc: edk2-devel-01 <edk2-devel@lists.01.org>,
	Anthony Perard <anthony.perard@citrix.com>,
	 Jordan Justen <jordan.l.justen@intel.com>,
	Julien Grall <julien.grall@linaro.org>
Subject: Re: [PATCH 02/26] OvmfPkg: require GCC48 or later
Date: Thu, 3 Jan 2019 10:33:10 +0100	[thread overview]
Message-ID: <CAKv+Gu_QWMumXd2+NNBtsdmTx9RLa6Ai7xevWvnTBS2H9cfQyw@mail.gmail.com> (raw)
In-Reply-To: <20190103024816.9236-3-lersek@redhat.com>

On Thu, 3 Jan 2019 at 03:48, Laszlo Ersek <lersek@redhat.com> wrote:
>
> We're about to remove BaseTools support for GCC44..GCC47. Reject those gcc
> versions cleanly in "OvmfPkg/build.sh". In "OvmfPkg/README", upgrade any
> mentions of the same gcc versions to GCC48.
>
> No GCC44..GCC47 references remain under OvmfPkg after this patch.
>
> Cc: Anthony Perard <anthony.perard@citrix.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Julien Grall <julien.grall@linaro.org>
> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Laszlo Ersek <lersek@redhat.com>

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

> ---
>
> Notes:
>     I tested that, after this patch, "build.sh" successfully builds OvmfPkg
>     with GCC48. I did no runtime tests, nor did I test the rejection path
>     with any of gcc-4.4 through gcc-4.7.
>
>  OvmfPkg/README   |  6 +++---
>  OvmfPkg/build.sh | 16 ++--------------
>  2 files changed, 5 insertions(+), 17 deletions(-)
>
> diff --git a/OvmfPkg/README b/OvmfPkg/README
> index 7415419d2dd7..68ce0750af19 100644
> --- a/OvmfPkg/README
> +++ b/OvmfPkg/README
> @@ -115,8 +115,8 @@ $ OvmfPkg/build.sh -a X64 qemu
>  And to run a 64-bit UEFI bootable ISO image:
>  $ OvmfPkg/build.sh -a X64 qemu -cdrom /path/to/disk-image.iso
>
> -To build a 32-bit OVMF without debug messages using GCC 4.5:
> -$ OvmfPkg/build.sh -a IA32 -b RELEASE -t GCC45
> +To build a 32-bit OVMF without debug messages using GCC 4.8:
> +$ OvmfPkg/build.sh -a IA32 -b RELEASE -t GCC48
>
>  === SMM support ===
>
> @@ -406,7 +406,7 @@ volume image.
>
>  If you build with the UNIXGCC toolchain, then debugging will be disabled
>  due to larger image sizes being produced by the UNIXGCC toolchain. The
> -first choice recommendation is to use GCC44 or newer instead.
> +first choice recommendation is to use GCC48 or newer instead.
>
>  If you must use UNIXGCC, then you can override the build options for
>  particular libraries and modules in the .dsc to re-enable debugging
> diff --git a/OvmfPkg/build.sh b/OvmfPkg/build.sh
> index 682155202564..6821742e7acd 100755
> --- a/OvmfPkg/build.sh
> +++ b/OvmfPkg/build.sh
> @@ -83,22 +83,10 @@ case `uname` in
>    Linux*)
>      gcc_version=$(gcc -v 2>&1 | tail -1 | awk '{print $3}')
>      case $gcc_version in
> -      [1-3].*|4.[0-3].*)
> -        echo OvmfPkg requires GCC4.4 or later
> +      [1-3].*|4.[0-7].*)
> +        echo OvmfPkg requires GCC4.8 or later
>          exit 1
>          ;;
> -      4.4.*)
> -        TARGET_TOOLS=GCC44
> -        ;;
> -      4.5.*)
> -        TARGET_TOOLS=GCC45
> -        ;;
> -      4.6.*)
> -        TARGET_TOOLS=GCC46
> -        ;;
> -      4.7.*)
> -        TARGET_TOOLS=GCC47
> -        ;;
>        4.8.*)
>          TARGET_TOOLS=GCC48
>          ;;
> --
> 2.19.1.3.g30247aa5d201
>
>


  reply	other threads:[~2019-01-03  9:33 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-03  2:47 [PATCH 00/26] remove the GCC44 through GCC47 toolchains Laszlo Ersek
2019-01-03  2:47 ` [PATCH 01/26] EmulatorPkg: require GCC48 or later Laszlo Ersek
2019-01-03  2:47 ` [PATCH 02/26] OvmfPkg: " Laszlo Ersek
2019-01-03  9:33   ` Ard Biesheuvel [this message]
2019-01-03  2:47 ` [PATCH 03/26] Vlv2TbltDevicePkg: assume " Laszlo Ersek
2019-01-04  6:53   ` Sun, Zailiang
2019-01-03  2:47 ` [PATCH 04/26] BaseTools/Conf/tools_def.template: drop ARM/AARCH support from GCC46/GCC47 Laszlo Ersek
2019-01-03  2:47 ` [PATCH 05/26] BaseTools/tools_def.template: fix up LF-only line terminator Laszlo Ersek
2019-01-03  2:47 ` [PATCH 06/26] BaseTools/tools_def.template: strip trailing whitespace Laszlo Ersek
2019-01-03  2:47 ` [PATCH 07/26] BaseTools/tools_def.template: remove GCC48_IA32_X64_DLINK_COMMON dead-end Laszlo Ersek
2019-01-03  2:47 ` [PATCH 08/26] BaseTools/tools_def.template: remove GCC47 leaf definitions Laszlo Ersek
2019-01-03  2:47 ` [PATCH 09/26] BaseTools/tools_def.template: propagate loss of GCC47 references Laszlo Ersek
2019-01-03  2:48 ` [PATCH 10/26] BaseTools/tools_def.template: remove GCC47 documentation Laszlo Ersek
2019-01-03  2:48 ` [PATCH 11/26] BaseTools/tools_def.template: remove GCC46 leaf definitions Laszlo Ersek
2019-01-03  2:48 ` [PATCH 12/26] BaseTools/tools_def.template: propagate loss of GCC46 references Laszlo Ersek
2019-01-03  2:48 ` [PATCH 13/26] BaseTools/tools_def.template: remove GCC46 documentation Laszlo Ersek
2019-01-03  2:48 ` [PATCH 14/26] BaseTools/tools_def.template: remove GCC45 leaf definitions Laszlo Ersek
2019-01-03  2:48 ` [PATCH 15/26] BaseTools/tools_def.template: propagate loss of GCC45 references Laszlo Ersek
2019-01-03  2:48 ` [PATCH 16/26] BaseTools/tools_def.template: remove GCC45 documentation Laszlo Ersek
2019-01-03  2:48 ` [PATCH 17/26] BaseTools/tools_def.template: remove GCC44 leaf definitions Laszlo Ersek
2019-01-03  2:48 ` [PATCH 18/26] BaseTools/tools_def.template: propagate loss of GCC44 references Laszlo Ersek
2019-01-03  2:48 ` [PATCH 19/26] BaseTools/tools_def.template: rename GCC44_ALL_CC_FLAGS to GCC48_ALL_CC_FLAGS Laszlo Ersek
2019-01-03  2:48 ` [PATCH 20/26] BaseTools/tools_def.template: eliminate GCC44_IA32_X64_DLINK_FLAGS Laszlo Ersek
2019-01-03  2:48 ` [PATCH 21/26] BaseTools/tools_def.template: rename GCC44_IA32_X64_DLINK_COMMON to GCC48_IA32_X64_DLINK_COMMON Laszlo Ersek
2019-01-03  2:48 ` [PATCH 22/26] BaseTools/tools_def.template: remove comment about GCC44 + LzmaF86Compress Laszlo Ersek
2019-01-03  2:48 ` [PATCH 23/26] BaseTools/tools_def.template: remove GCC44 documentation Laszlo Ersek
2019-01-03  2:48 ` [PATCH 24/26] ArmPkg/ArmSoftFloatLib: drop build flags specific to GCC46/GCC47 Laszlo Ersek
2019-01-03  9:33   ` Ard Biesheuvel
2019-01-03  2:48 ` [PATCH 25/26] CryptoPkg/BaseCryptLib: drop build flags specific to GCC44 Laszlo Ersek
2019-01-03  5:02   ` Wang, Jian J
2019-01-03  2:48 ` [PATCH 26/26] Revert "MdePkg: avoid __builtin_unreachable() on GCC v4.4" Laszlo Ersek
2019-01-03  9:34   ` Ard Biesheuvel
2019-01-03 13:25   ` Marvin Häuser
2019-01-03 20:21 ` [PATCH 00/26] remove the GCC44 through GCC47 toolchains Jordan Justen
2019-01-07  9:44 ` Philippe Mathieu-Daudé
2019-01-07 12:15   ` Gao, Liming
2019-01-07 18:08     ` Laszlo Ersek
2019-01-08  1:54       ` Laszlo Ersek
2019-01-08 11:34         ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKv+Gu_QWMumXd2+NNBtsdmTx9RLa6Ai7xevWvnTBS2H9cfQyw@mail.gmail.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox