* [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function
@ 2018-12-13 23:48 Jeff Brasen
2018-12-21 14:54 ` Ard Biesheuvel
0 siblings, 1 reply; 4+ messages in thread
From: Jeff Brasen @ 2018-12-13 23:48 UTC (permalink / raw)
To: edk2-devel; +Cc: Jeff Brasen, Ard Biesheuvel, Leif Lindholm, Grish Pathak
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Grish Pathak <girish.pathak@arm.com>
---
ArmPkg/ArmPkg.dec | 1 +
.../ArmScmiDxe/ArmScmiClockProtocolPrivate.h | 7 +
ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf | 1 +
ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c | 62 +++++++
ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h | 198 +++++++++++++++++++++
5 files changed, 269 insertions(+)
create mode 100644 ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
diff --git a/ArmPkg/ArmPkg.dec b/ArmPkg/ArmPkg.dec
index d99eb67..2f5e5b3 100644
--- a/ArmPkg/ArmPkg.dec
+++ b/ArmPkg/ArmPkg.dec
@@ -59,6 +59,7 @@
## Arm System Control and Management Interface(SCMI) Clock management protocol
## ArmPkg/Include/Protocol/ArmScmiClockProtocol.h
gArmScmiClockProtocolGuid = { 0x91ce67a8, 0xe0aa, 0x4012, { 0xb9, 0x9f, 0xb6, 0xfc, 0xf3, 0x4, 0x8e, 0xaa } }
+ gArmScmiClock2ProtocolGuid = { 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } }
## Arm System Control and Management Interface(SCMI) Clock management protocol
## ArmPkg/Include/Protocol/ArmScmiPerformanceProtocol.h
diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
index 0d1ec6f..c135bac 100644
--- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
+++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
@@ -59,6 +59,13 @@ typedef struct {
CLOCK_RATE_DWORD Rate;
} CLOCK_RATE_SET_ATTRIBUTES;
+
+// Message parameters for CLOCK_CONFIG_SET command.
+typedef struct {
+ UINT32 ClockId;
+ UINT32 Attributes;
+} CLOCK_CONFIG_SET_ATTRIBUTES;
+
// if ClockAttr Bit[0] is set then clock device is enabled.
#define CLOCK_ENABLE_MASK 0x1
#define CLOCK_ENABLED(ClockAttr) ((ClockAttr & CLOCK_ENABLE_MASK) == 1)
diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
index 05ce9c0..9b29b9f 100644
--- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
+++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
@@ -46,6 +46,7 @@
[Protocols]
gArmScmiBaseProtocolGuid
gArmScmiClockProtocolGuid
+ gArmScmiClock2ProtocolGuid
gArmScmiPerformanceProtocolGuid
[Depex]
diff --git a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
index 64d2afa..c7f27a3 100644
--- a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
+++ b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
@@ -19,6 +19,7 @@
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Protocol/ArmScmiClockProtocol.h>
+#include <Protocol/ArmScmiClock2Protocol.h>
#include "ArmScmiClockProtocolPrivate.h"
#include "ScmiPrivate.h"
@@ -388,6 +389,53 @@ ClockRateSet (
return Status;
}
+/** Enable/Disable specified clock.
+
+ @param[in] This A Pointer to SCMI_CLOCK_PROTOCOL Instance.
+ @param[in] ClockId Identifier for the clock device.
+ @param[in] Enable TRUE to enable, FALSE to disable.
+
+ @retval EFI_SUCCESS Clock enable/disable successful.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+STATIC
+EFI_STATUS
+ClockEnable (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ IN UINT32 ClockId,
+ IN BOOLEAN Enable
+ )
+{
+ EFI_STATUS Status;
+ CLOCK_CONFIG_SET_ATTRIBUTES *ClockConfigSetAttributes;
+ SCMI_COMMAND Cmd;
+ UINT32 PayloadLength;
+
+ Status = ScmiCommandGetPayload ((UINT32**)&ClockConfigSetAttributes);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Fill arguments for clock protocol command.
+ ClockConfigSetAttributes->ClockId = ClockId;
+ ClockConfigSetAttributes->Attributes = Enable ? BIT0 : 0;
+
+ Cmd.ProtocolId = SCMI_PROTOCOL_ID_CLOCK;
+ Cmd.MessageId = SCMI_MESSAGE_ID_CLOCK_CONFIG_SET;
+
+ PayloadLength = sizeof (CLOCK_CONFIG_SET_ATTRIBUTES);
+
+ // Execute and wait for response on a SCMI channel.
+ Status = ScmiCommandExecute (
+ &Cmd,
+ &PayloadLength,
+ NULL
+ );
+
+ return Status;
+}
+
// Instance of the SCMI clock management protocol.
STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
ClockGetVersion,
@@ -398,6 +446,18 @@ STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
ClockRateSet
};
+// Instance of the SCMI clock management protocol.
+STATIC CONST SCMI_CLOCK2_PROTOCOL ScmiClock2Protocol = {
+ (SCMI_CLOCK2_GET_VERSION)ClockGetVersion,
+ (SCMI_CLOCK2_GET_TOTAL_CLOCKS)ClockGetTotalClocks,
+ (SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES)ClockGetClockAttributes,
+ (SCMI_CLOCK2_DESCRIBE_RATES)ClockDescribeRates,
+ (SCMI_CLOCK2_RATE_GET)ClockRateGet,
+ (SCMI_CLOCK2_RATE_SET)ClockRateSet,
+ SCMI_CLOCK2_PROTOCOL_VERSION,
+ ClockEnable
+ };
+
/** Initialize clock management protocol and install protocol on a given handle.
@param[in] Handle Handle to install clock management protocol.
@@ -413,6 +473,8 @@ ScmiClockProtocolInit (
Handle,
&gArmScmiClockProtocolGuid,
&ScmiClockProtocol,
+ &gArmScmiClock2ProtocolGuid,
+ &ScmiClock2Protocol,
NULL
);
}
diff --git a/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
new file mode 100644
index 0000000..f2c9670
--- /dev/null
+++ b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
@@ -0,0 +1,198 @@
+/** @file
+
+ Copyright (c) 2017-2018, Arm Limited. All rights reserved.
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ System Control and Management Interface V1.0
+ http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/
+ DEN0056A_System_Control_and_Management_Interface.pdf
+**/
+
+#ifndef ARM_SCMI_CLOCK2_PROTOCOL_H_
+#define ARM_SCMI_CLOCK2_PROTOCOL_H_
+
+#include <Protocol/ArmScmi.h>
+#include <Protocol/ArmScmiClockProtocol.h>
+
+#define ARM_SCMI_CLOCK2_PROTOCOL_GUID { \
+ 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } \
+ }
+
+extern EFI_GUID gArmScmiClock2ProtocolGuid;
+
+#define SCMI_CLOCK2_PROTOCOL_VERSION 1
+
+typedef struct _SCMI_CLOCK2_PROTOCOL SCMI_CLOCK2_PROTOCOL;
+
+// Protocol Interface functions.
+
+/** Return version of the clock management protocol supported by SCP firmware.
+
+ @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
+
+ @param[out] Version Version of the supported SCMI Clock management protocol.
+
+ @retval EFI_SUCCESS The version is returned.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SCMI_CLOCK2_GET_VERSION) (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ OUT UINT32 *Version
+ );
+
+/** Return total number of clock devices supported by the clock management
+ protocol.
+
+ @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
+
+ @param[out] TotalClocks Total number of clocks supported.
+
+ @retval EFI_SUCCESS Total number of clocks supported is returned.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SCMI_CLOCK2_GET_TOTAL_CLOCKS) (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ OUT UINT32 *TotalClocks
+ );
+
+/** Return attributes of a clock device.
+
+ @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
+ @param[in] ClockId Identifier for the clock device.
+
+ @param[out] Enabled If TRUE, the clock device is enabled.
+ @param[out] ClockAsciiName A NULL terminated ASCII string with the clock
+ name, of up to 16 bytes.
+
+ @retval EFI_SUCCESS Clock device attributes are returned.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES) (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ IN UINT32 ClockId,
+ OUT BOOLEAN *Enabled,
+ OUT CHAR8 *ClockAsciiName
+ );
+
+/** Return list of rates supported by a given clock device.
+
+ @param[in] This A pointer to SCMI_CLOCK2_PROTOCOL Instance.
+ @param[in] ClockId Identifier for the clock device.
+
+ @param[out] Format SCMI_CLOCK_RATE_FORMAT_DISCRETE: Clock device
+ supports range of clock rates which are non-linear.
+
+ SCMI_CLOCK_RATE_FORMAT_LINEAR: Clock device supports
+ range of linear clock rates from Min to Max in steps.
+
+ @param[out] TotalRates Total number of rates.
+
+ @param[in,out] RateArraySize Size of the RateArray.
+
+ @param[out] RateArray List of clock rates.
+
+ @retval EFI_SUCCESS List of clock rates are returned.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval EFI_BUFFER_TOO_SMALL RateArraySize is too small for the result.
+ It has been updated to the size needed.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SCMI_CLOCK2_DESCRIBE_RATES) (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ IN UINT32 ClockId,
+ OUT SCMI_CLOCK_RATE_FORMAT *Format,
+ OUT UINT32 *TotalRates,
+ IN OUT UINT32 *RateArraySize,
+ OUT SCMI_CLOCK_RATE *RateArray
+ );
+
+/** Get clock rate.
+
+ @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
+ @param[in] ClockId Identifier for the clock device.
+
+ @param[out] Rate Clock rate.
+
+ @retval EFI_SUCCESS Clock rate is returned.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SCMI_CLOCK2_RATE_GET) (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ IN UINT32 ClockId,
+ OUT UINT64 *Rate
+ );
+
+/** Set clock rate.
+
+ @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
+ @param[in] ClockId Identifier for the clock device.
+ @param[in] Rate Clock rate.
+
+ @retval EFI_SUCCESS Clock rate set success.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SCMI_CLOCK2_RATE_SET) (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ IN UINT32 ClockId,
+ IN UINT64 Rate
+ );
+
+/** Enable/Disable specified clock.
+ Function is only available under gArmScmiClock2ProtocolGuid
+
+ @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
+ @param[in] ClockId Identifier for the clock device.
+ @param[in] Enable TRUE to enable, FALSE to disable.
+
+ @retval EFI_SUCCESS Clock enable/disable successful.
+ @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
+ @retval !(EFI_SUCCESS) Other errors.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SCMI_CLOCK2_ENABLE) (
+ IN SCMI_CLOCK2_PROTOCOL *This,
+ IN UINT32 ClockId,
+ IN BOOLEAN Enable
+ );
+
+typedef struct _SCMI_CLOCK2_PROTOCOL {
+ SCMI_CLOCK2_GET_VERSION GetVersion;
+ SCMI_CLOCK2_GET_TOTAL_CLOCKS GetTotalClocks;
+ SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES GetClockAttributes;
+ SCMI_CLOCK2_DESCRIBE_RATES DescribeRates;
+ SCMI_CLOCK2_RATE_GET RateGet;
+ SCMI_CLOCK2_RATE_SET RateSet;
+
+ //Extention to original ClockProtocol, added here so SCMI_CLOCK2_PROTOCOL
+ //can be cast to SCMI_CLOCK_PROTOCOL
+ UINTN Version; //For future expandability of protocol
+ SCMI_CLOCK2_ENABLE Enable;
+} SCMI_CLOCK2_PROTOCOL;
+
+#endif /* ARM_SCMI_CLOCK2_PROTOCOL_H_ */
+
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function
2018-12-13 23:48 [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function Jeff Brasen
@ 2018-12-21 14:54 ` Ard Biesheuvel
2018-12-21 16:48 ` Girish Pathak
0 siblings, 1 reply; 4+ messages in thread
From: Ard Biesheuvel @ 2018-12-21 14:54 UTC (permalink / raw)
To: Jeff Brasen, Grish Pathak; +Cc: edk2-devel@lists.01.org, Leif Lindholm
On Fri, 14 Dec 2018 at 00:48, Jeff Brasen <jbrasen@nvidia.com> wrote:
>
> Add function to allow enabling and disabling of the clock using the SCMI
> interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
> support new API from those that just have the older protocol.
>
> SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
> changes. It is placed after the functions that are present in the
> existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
> SCMI_CLOCK_PROTOCOL so that only a single implementation of those
> function are needed.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Grish Pathak <girish.pathak@arm.com>
I'd like to hear from Girish as well, since he contributed this code originally.
> ---
> ArmPkg/ArmPkg.dec | 1 +
> .../ArmScmiDxe/ArmScmiClockProtocolPrivate.h | 7 +
> ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf | 1 +
> ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c | 62 +++++++
> ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h | 198 +++++++++++++++++++++
> 5 files changed, 269 insertions(+)
> create mode 100644 ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
>
> diff --git a/ArmPkg/ArmPkg.dec b/ArmPkg/ArmPkg.dec
> index d99eb67..2f5e5b3 100644
> --- a/ArmPkg/ArmPkg.dec
> +++ b/ArmPkg/ArmPkg.dec
> @@ -59,6 +59,7 @@
> ## Arm System Control and Management Interface(SCMI) Clock management protocol
> ## ArmPkg/Include/Protocol/ArmScmiClockProtocol.h
> gArmScmiClockProtocolGuid = { 0x91ce67a8, 0xe0aa, 0x4012, { 0xb9, 0x9f, 0xb6, 0xfc, 0xf3, 0x4, 0x8e, 0xaa } }
> + gArmScmiClock2ProtocolGuid = { 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } }
>
> ## Arm System Control and Management Interface(SCMI) Clock management protocol
> ## ArmPkg/Include/Protocol/ArmScmiPerformanceProtocol.h
> diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> index 0d1ec6f..c135bac 100644
> --- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> +++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> @@ -59,6 +59,13 @@ typedef struct {
> CLOCK_RATE_DWORD Rate;
> } CLOCK_RATE_SET_ATTRIBUTES;
>
> +
> +// Message parameters for CLOCK_CONFIG_SET command.
> +typedef struct {
> + UINT32 ClockId;
> + UINT32 Attributes;
> +} CLOCK_CONFIG_SET_ATTRIBUTES;
> +
> // if ClockAttr Bit[0] is set then clock device is enabled.
> #define CLOCK_ENABLE_MASK 0x1
> #define CLOCK_ENABLED(ClockAttr) ((ClockAttr & CLOCK_ENABLE_MASK) == 1)
> diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> index 05ce9c0..9b29b9f 100644
> --- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> +++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> @@ -46,6 +46,7 @@
> [Protocols]
> gArmScmiBaseProtocolGuid
> gArmScmiClockProtocolGuid
> + gArmScmiClock2ProtocolGuid
> gArmScmiPerformanceProtocolGuid
>
> [Depex]
> diff --git a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> index 64d2afa..c7f27a3 100644
> --- a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> +++ b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> @@ -19,6 +19,7 @@
> #include <Library/DebugLib.h>
> #include <Library/UefiBootServicesTableLib.h>
> #include <Protocol/ArmScmiClockProtocol.h>
> +#include <Protocol/ArmScmiClock2Protocol.h>
>
> #include "ArmScmiClockProtocolPrivate.h"
> #include "ScmiPrivate.h"
> @@ -388,6 +389,53 @@ ClockRateSet (
> return Status;
> }
>
> +/** Enable/Disable specified clock.
> +
> + @param[in] This A Pointer to SCMI_CLOCK_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> + @param[in] Enable TRUE to enable, FALSE to disable.
> +
> + @retval EFI_SUCCESS Clock enable/disable successful.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +STATIC
> +EFI_STATUS
> +ClockEnable (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + IN BOOLEAN Enable
> + )
> +{
> + EFI_STATUS Status;
> + CLOCK_CONFIG_SET_ATTRIBUTES *ClockConfigSetAttributes;
> + SCMI_COMMAND Cmd;
> + UINT32 PayloadLength;
> +
> + Status = ScmiCommandGetPayload ((UINT32**)&ClockConfigSetAttributes);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + // Fill arguments for clock protocol command.
> + ClockConfigSetAttributes->ClockId = ClockId;
> + ClockConfigSetAttributes->Attributes = Enable ? BIT0 : 0;
> +
> + Cmd.ProtocolId = SCMI_PROTOCOL_ID_CLOCK;
> + Cmd.MessageId = SCMI_MESSAGE_ID_CLOCK_CONFIG_SET;
> +
> + PayloadLength = sizeof (CLOCK_CONFIG_SET_ATTRIBUTES);
> +
> + // Execute and wait for response on a SCMI channel.
> + Status = ScmiCommandExecute (
> + &Cmd,
> + &PayloadLength,
> + NULL
> + );
> +
> + return Status;
> +}
> +
> // Instance of the SCMI clock management protocol.
> STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
> ClockGetVersion,
> @@ -398,6 +446,18 @@ STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
> ClockRateSet
> };
>
> +// Instance of the SCMI clock management protocol.
> +STATIC CONST SCMI_CLOCK2_PROTOCOL ScmiClock2Protocol = {
> + (SCMI_CLOCK2_GET_VERSION)ClockGetVersion,
> + (SCMI_CLOCK2_GET_TOTAL_CLOCKS)ClockGetTotalClocks,
> + (SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES)ClockGetClockAttributes,
> + (SCMI_CLOCK2_DESCRIBE_RATES)ClockDescribeRates,
> + (SCMI_CLOCK2_RATE_GET)ClockRateGet,
> + (SCMI_CLOCK2_RATE_SET)ClockRateSet,
> + SCMI_CLOCK2_PROTOCOL_VERSION,
> + ClockEnable
> + };
> +
> /** Initialize clock management protocol and install protocol on a given handle.
>
> @param[in] Handle Handle to install clock management protocol.
> @@ -413,6 +473,8 @@ ScmiClockProtocolInit (
> Handle,
> &gArmScmiClockProtocolGuid,
> &ScmiClockProtocol,
> + &gArmScmiClock2ProtocolGuid,
> + &ScmiClock2Protocol,
> NULL
> );
> }
> diff --git a/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> new file mode 100644
> index 0000000..f2c9670
> --- /dev/null
> +++ b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> @@ -0,0 +1,198 @@
> +/** @file
> +
> + Copyright (c) 2017-2018, Arm Limited. All rights reserved.
> +
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the BSD License
> + which accompanies this distribution. The full text of the license may be found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> + System Control and Management Interface V1.0
> + http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/
> + DEN0056A_System_Control_and_Management_Interface.pdf
> +**/
> +
> +#ifndef ARM_SCMI_CLOCK2_PROTOCOL_H_
> +#define ARM_SCMI_CLOCK2_PROTOCOL_H_
> +
> +#include <Protocol/ArmScmi.h>
> +#include <Protocol/ArmScmiClockProtocol.h>
> +
> +#define ARM_SCMI_CLOCK2_PROTOCOL_GUID { \
> + 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } \
> + }
> +
> +extern EFI_GUID gArmScmiClock2ProtocolGuid;
> +
> +#define SCMI_CLOCK2_PROTOCOL_VERSION 1
> +
> +typedef struct _SCMI_CLOCK2_PROTOCOL SCMI_CLOCK2_PROTOCOL;
> +
> +// Protocol Interface functions.
> +
> +/** Return version of the clock management protocol supported by SCP firmware.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> +
> + @param[out] Version Version of the supported SCMI Clock management protocol.
> +
> + @retval EFI_SUCCESS The version is returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_GET_VERSION) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + OUT UINT32 *Version
> + );
> +
> +/** Return total number of clock devices supported by the clock management
> + protocol.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> +
> + @param[out] TotalClocks Total number of clocks supported.
> +
> + @retval EFI_SUCCESS Total number of clocks supported is returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_GET_TOTAL_CLOCKS) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + OUT UINT32 *TotalClocks
> + );
> +
> +/** Return attributes of a clock device.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> +
> + @param[out] Enabled If TRUE, the clock device is enabled.
> + @param[out] ClockAsciiName A NULL terminated ASCII string with the clock
> + name, of up to 16 bytes.
> +
> + @retval EFI_SUCCESS Clock device attributes are returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + OUT BOOLEAN *Enabled,
> + OUT CHAR8 *ClockAsciiName
> + );
> +
> +/** Return list of rates supported by a given clock device.
> +
> + @param[in] This A pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> +
> + @param[out] Format SCMI_CLOCK_RATE_FORMAT_DISCRETE: Clock device
> + supports range of clock rates which are non-linear.
> +
> + SCMI_CLOCK_RATE_FORMAT_LINEAR: Clock device supports
> + range of linear clock rates from Min to Max in steps.
> +
> + @param[out] TotalRates Total number of rates.
> +
> + @param[in,out] RateArraySize Size of the RateArray.
> +
> + @param[out] RateArray List of clock rates.
> +
> + @retval EFI_SUCCESS List of clock rates are returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval EFI_BUFFER_TOO_SMALL RateArraySize is too small for the result.
> + It has been updated to the size needed.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_DESCRIBE_RATES) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + OUT SCMI_CLOCK_RATE_FORMAT *Format,
> + OUT UINT32 *TotalRates,
> + IN OUT UINT32 *RateArraySize,
> + OUT SCMI_CLOCK_RATE *RateArray
> + );
> +
> +/** Get clock rate.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> +
> + @param[out] Rate Clock rate.
> +
> + @retval EFI_SUCCESS Clock rate is returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_RATE_GET) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + OUT UINT64 *Rate
> + );
> +
> +/** Set clock rate.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> + @param[in] Rate Clock rate.
> +
> + @retval EFI_SUCCESS Clock rate set success.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_RATE_SET) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + IN UINT64 Rate
> + );
> +
> +/** Enable/Disable specified clock.
> + Function is only available under gArmScmiClock2ProtocolGuid
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> + @param[in] Enable TRUE to enable, FALSE to disable.
> +
> + @retval EFI_SUCCESS Clock enable/disable successful.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_ENABLE) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + IN BOOLEAN Enable
> + );
> +
> +typedef struct _SCMI_CLOCK2_PROTOCOL {
> + SCMI_CLOCK2_GET_VERSION GetVersion;
> + SCMI_CLOCK2_GET_TOTAL_CLOCKS GetTotalClocks;
> + SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES GetClockAttributes;
> + SCMI_CLOCK2_DESCRIBE_RATES DescribeRates;
> + SCMI_CLOCK2_RATE_GET RateGet;
> + SCMI_CLOCK2_RATE_SET RateSet;
> +
> + //Extention to original ClockProtocol, added here so SCMI_CLOCK2_PROTOCOL
> + //can be cast to SCMI_CLOCK_PROTOCOL
> + UINTN Version; //For future expandability of protocol
> + SCMI_CLOCK2_ENABLE Enable;
> +} SCMI_CLOCK2_PROTOCOL;
> +
> +#endif /* ARM_SCMI_CLOCK2_PROTOCOL_H_ */
> +
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function
2018-12-21 14:54 ` Ard Biesheuvel
@ 2018-12-21 16:48 ` Girish Pathak
2018-12-21 17:31 ` Ard Biesheuvel
0 siblings, 1 reply; 4+ messages in thread
From: Girish Pathak @ 2018-12-21 16:48 UTC (permalink / raw)
To: Ard Biesheuvel, Jeff Brasen; +Cc: edk2-devel@lists.01.org, Leif Lindholm
Apart from some minor indentation errors in function parameter declarations in ArmScmiClock2Protocol.h , this looks fine.
-----Original Message-----
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Sent: 21 December 2018 14:55
To: Jeff Brasen <jbrasen@nvidia.com>; Girish Pathak <Girish.Pathak@arm.com>
Cc: edk2-devel@lists.01.org; Leif Lindholm <leif.lindholm@linaro.org>
Subject: Re: [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function
On Fri, 14 Dec 2018 at 00:48, Jeff Brasen <jbrasen@nvidia.com> wrote:
>
> Add function to allow enabling and disabling of the clock using the
> SCMI interface. Add gArmScmiClock2ProtocolGuid to distinguish
> platforms that support new API from those that just have the older protocol.
>
> SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
> changes. It is placed after the functions that are present in the
> existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
> SCMI_CLOCK_PROTOCOL so that only a single implementation of those
> function are needed.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Grish Pathak <girish.pathak@arm.com>
I'd like to hear from Girish as well, since he contributed this code originally.
> ---
> ArmPkg/ArmPkg.dec | 1 +
> .../ArmScmiDxe/ArmScmiClockProtocolPrivate.h | 7 +
> ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf | 1 +
> ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c | 62 +++++++
> ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h | 198 +++++++++++++++++++++
> 5 files changed, 269 insertions(+)
> create mode 100644 ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
>
> diff --git a/ArmPkg/ArmPkg.dec b/ArmPkg/ArmPkg.dec index
> d99eb67..2f5e5b3 100644
> --- a/ArmPkg/ArmPkg.dec
> +++ b/ArmPkg/ArmPkg.dec
> @@ -59,6 +59,7 @@
> ## Arm System Control and Management Interface(SCMI) Clock management protocol
> ## ArmPkg/Include/Protocol/ArmScmiClockProtocol.h
> gArmScmiClockProtocolGuid = { 0x91ce67a8, 0xe0aa, 0x4012, { 0xb9,
> 0x9f, 0xb6, 0xfc, 0xf3, 0x4, 0x8e, 0xaa } }
> + gArmScmiClock2ProtocolGuid = { 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8,
> + 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } }
>
> ## Arm System Control and Management Interface(SCMI) Clock management protocol
> ## ArmPkg/Include/Protocol/ArmScmiPerformanceProtocol.h
> diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> index 0d1ec6f..c135bac 100644
> --- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> +++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> @@ -59,6 +59,13 @@ typedef struct {
> CLOCK_RATE_DWORD Rate;
> } CLOCK_RATE_SET_ATTRIBUTES;
>
> +
> +// Message parameters for CLOCK_CONFIG_SET command.
> +typedef struct {
> + UINT32 ClockId;
> + UINT32 Attributes;
> +} CLOCK_CONFIG_SET_ATTRIBUTES;
> +
> // if ClockAttr Bit[0] is set then clock device is enabled.
> #define CLOCK_ENABLE_MASK 0x1
> #define CLOCK_ENABLED(ClockAttr) ((ClockAttr & CLOCK_ENABLE_MASK) ==
> 1) diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> index 05ce9c0..9b29b9f 100644
> --- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> +++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> @@ -46,6 +46,7 @@
> [Protocols]
> gArmScmiBaseProtocolGuid
> gArmScmiClockProtocolGuid
> + gArmScmiClock2ProtocolGuid
> gArmScmiPerformanceProtocolGuid
>
> [Depex]
> diff --git a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> index 64d2afa..c7f27a3 100644
> --- a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> +++ b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> @@ -19,6 +19,7 @@
> #include <Library/DebugLib.h>
> #include <Library/UefiBootServicesTableLib.h>
> #include <Protocol/ArmScmiClockProtocol.h>
> +#include <Protocol/ArmScmiClock2Protocol.h>
>
> #include "ArmScmiClockProtocolPrivate.h"
> #include "ScmiPrivate.h"
> @@ -388,6 +389,53 @@ ClockRateSet (
> return Status;
> }
>
> +/** Enable/Disable specified clock.
> +
> + @param[in] This A Pointer to SCMI_CLOCK_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> + @param[in] Enable TRUE to enable, FALSE to disable.
> +
> + @retval EFI_SUCCESS Clock enable/disable successful.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +STATIC
> +EFI_STATUS
> +ClockEnable (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + IN BOOLEAN Enable
> + )
> +{
> + EFI_STATUS Status;
> + CLOCK_CONFIG_SET_ATTRIBUTES *ClockConfigSetAttributes;
> + SCMI_COMMAND Cmd;
> + UINT32 PayloadLength;
> +
> + Status = ScmiCommandGetPayload
> + ((UINT32**)&ClockConfigSetAttributes);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + // Fill arguments for clock protocol command.
> + ClockConfigSetAttributes->ClockId = ClockId;
> + ClockConfigSetAttributes->Attributes = Enable ? BIT0 : 0;
> +
> + Cmd.ProtocolId = SCMI_PROTOCOL_ID_CLOCK; Cmd.MessageId =
> + SCMI_MESSAGE_ID_CLOCK_CONFIG_SET;
> +
> + PayloadLength = sizeof (CLOCK_CONFIG_SET_ATTRIBUTES);
> +
> + // Execute and wait for response on a SCMI channel.
> + Status = ScmiCommandExecute (
> + &Cmd,
> + &PayloadLength,
> + NULL
> + );
> +
> + return Status;
> +}
> +
> // Instance of the SCMI clock management protocol.
> STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
> ClockGetVersion,
> @@ -398,6 +446,18 @@ STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
> ClockRateSet
> };
>
> +// Instance of the SCMI clock management protocol.
> +STATIC CONST SCMI_CLOCK2_PROTOCOL ScmiClock2Protocol = {
> + (SCMI_CLOCK2_GET_VERSION)ClockGetVersion,
> + (SCMI_CLOCK2_GET_TOTAL_CLOCKS)ClockGetTotalClocks,
> + (SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES)ClockGetClockAttributes,
> + (SCMI_CLOCK2_DESCRIBE_RATES)ClockDescribeRates,
> + (SCMI_CLOCK2_RATE_GET)ClockRateGet,
> + (SCMI_CLOCK2_RATE_SET)ClockRateSet,
> + SCMI_CLOCK2_PROTOCOL_VERSION,
> + ClockEnable
> + };
> +
> /** Initialize clock management protocol and install protocol on a given handle.
>
> @param[in] Handle Handle to install clock management protocol.
> @@ -413,6 +473,8 @@ ScmiClockProtocolInit (
> Handle,
> &gArmScmiClockProtocolGuid,
> &ScmiClockProtocol,
> + &gArmScmiClock2ProtocolGuid,
> + &ScmiClock2Protocol,
> NULL
> );
> }
> diff --git a/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> new file mode 100644
> index 0000000..f2c9670
> --- /dev/null
> +++ b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> @@ -0,0 +1,198 @@
> +/** @file
> +
> + Copyright (c) 2017-2018, Arm Limited. All rights reserved.
> +
> + This program and the accompanying materials are licensed and made
> + available under the terms and conditions of the BSD License which
> + accompanies this distribution. The full text of the license may be
> + found at http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> + BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> + System Control and Management Interface V1.0
> + http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/
> + DEN0056A_System_Control_and_Management_Interface.pdf
> +**/
> +
> +#ifndef ARM_SCMI_CLOCK2_PROTOCOL_H_
> +#define ARM_SCMI_CLOCK2_PROTOCOL_H_
> +
> +#include <Protocol/ArmScmi.h>
> +#include <Protocol/ArmScmiClockProtocol.h>
> +
> +#define ARM_SCMI_CLOCK2_PROTOCOL_GUID { \
> + 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05,
> +0xef, 0xcf } \
> + }
> +
> +extern EFI_GUID gArmScmiClock2ProtocolGuid;
> +
> +#define SCMI_CLOCK2_PROTOCOL_VERSION 1
> +
> +typedef struct _SCMI_CLOCK2_PROTOCOL SCMI_CLOCK2_PROTOCOL;
> +
> +// Protocol Interface functions.
> +
> +/** Return version of the clock management protocol supported by SCP firmware.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> +
> + @param[out] Version Version of the supported SCMI Clock management protocol.
> +
> + @retval EFI_SUCCESS The version is returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_GET_VERSION) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + OUT UINT32 *Version
> + );
> +
> +/** Return total number of clock devices supported by the clock management
> + protocol.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> +
> + @param[out] TotalClocks Total number of clocks supported.
> +
> + @retval EFI_SUCCESS Total number of clocks supported is returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_GET_TOTAL_CLOCKS) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + OUT UINT32 *TotalClocks
> + );
> +
> +/** Return attributes of a clock device.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> +
> + @param[out] Enabled If TRUE, the clock device is enabled.
> + @param[out] ClockAsciiName A NULL terminated ASCII string with the clock
> + name, of up to 16 bytes.
> +
> + @retval EFI_SUCCESS Clock device attributes are returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + OUT BOOLEAN *Enabled,
> + OUT CHAR8 *ClockAsciiName
> + );
> +
> +/** Return list of rates supported by a given clock device.
> +
> + @param[in] This A pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> +
> + @param[out] Format SCMI_CLOCK_RATE_FORMAT_DISCRETE: Clock device
> + supports range of clock rates which are non-linear.
> +
> + SCMI_CLOCK_RATE_FORMAT_LINEAR: Clock device supports
> + range of linear clock rates from Min to Max in steps.
> +
> + @param[out] TotalRates Total number of rates.
> +
> + @param[in,out] RateArraySize Size of the RateArray.
> +
> + @param[out] RateArray List of clock rates.
> +
> + @retval EFI_SUCCESS List of clock rates are returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval EFI_BUFFER_TOO_SMALL RateArraySize is too small for the result.
> + It has been updated to the size needed.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_DESCRIBE_RATES) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + OUT SCMI_CLOCK_RATE_FORMAT *Format,
> + OUT UINT32 *TotalRates,
> + IN OUT UINT32 *RateArraySize,
> + OUT SCMI_CLOCK_RATE *RateArray
> + );
> +
> +/** Get clock rate.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> +
> + @param[out] Rate Clock rate.
> +
> + @retval EFI_SUCCESS Clock rate is returned.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_RATE_GET) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + OUT UINT64 *Rate
> + );
> +
> +/** Set clock rate.
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> + @param[in] Rate Clock rate.
> +
> + @retval EFI_SUCCESS Clock rate set success.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_RATE_SET) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + IN UINT64 Rate
> + );
> +
> +/** Enable/Disable specified clock.
> + Function is only available under gArmScmiClock2ProtocolGuid
> +
> + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> + @param[in] ClockId Identifier for the clock device.
> + @param[in] Enable TRUE to enable, FALSE to disable.
> +
> + @retval EFI_SUCCESS Clock enable/disable successful.
> + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> + @retval !(EFI_SUCCESS) Other errors.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *SCMI_CLOCK2_ENABLE) (
> + IN SCMI_CLOCK2_PROTOCOL *This,
> + IN UINT32 ClockId,
> + IN BOOLEAN Enable
> + );
> +
> +typedef struct _SCMI_CLOCK2_PROTOCOL {
> + SCMI_CLOCK2_GET_VERSION GetVersion;
> + SCMI_CLOCK2_GET_TOTAL_CLOCKS GetTotalClocks;
> + SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES GetClockAttributes;
> + SCMI_CLOCK2_DESCRIBE_RATES DescribeRates;
> + SCMI_CLOCK2_RATE_GET RateGet;
> + SCMI_CLOCK2_RATE_SET RateSet;
> +
> + //Extention to original ClockProtocol, added here so
> +SCMI_CLOCK2_PROTOCOL
> + //can be cast to SCMI_CLOCK_PROTOCOL
> + UINTN Version; //For future expandability of protocol
> + SCMI_CLOCK2_ENABLE Enable;
> +} SCMI_CLOCK2_PROTOCOL;
> +
> +#endif /* ARM_SCMI_CLOCK2_PROTOCOL_H_ */
> +
> --
> 2.7.4
>
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function
2018-12-21 16:48 ` Girish Pathak
@ 2018-12-21 17:31 ` Ard Biesheuvel
0 siblings, 0 replies; 4+ messages in thread
From: Ard Biesheuvel @ 2018-12-21 17:31 UTC (permalink / raw)
To: Girish Pathak; +Cc: Jeff Brasen, edk2-devel@lists.01.org, Leif Lindholm
On Fri, 21 Dec 2018 at 17:48, Girish Pathak <Girish.Pathak@arm.com> wrote:
>
> Apart from some minor indentation errors in function parameter declarations in ArmScmiClock2Protocol.h , this looks fine.
>
Thanks
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
I've cleaned it up a bit and pushed it as 9bba10eb4336..559a07d84e5a
>
> -----Original Message-----
> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Sent: 21 December 2018 14:55
> To: Jeff Brasen <jbrasen@nvidia.com>; Girish Pathak <Girish.Pathak@arm.com>
> Cc: edk2-devel@lists.01.org; Leif Lindholm <leif.lindholm@linaro.org>
> Subject: Re: [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function
>
> On Fri, 14 Dec 2018 at 00:48, Jeff Brasen <jbrasen@nvidia.com> wrote:
> >
> > Add function to allow enabling and disabling of the clock using the
> > SCMI interface. Add gArmScmiClock2ProtocolGuid to distinguish
> > platforms that support new API from those that just have the older protocol.
> >
> > SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
> > changes. It is placed after the functions that are present in the
> > existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
> > SCMI_CLOCK_PROTOCOL so that only a single implementation of those
> > function are needed.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Cc: Leif Lindholm <leif.lindholm@linaro.org>
> > Cc: Grish Pathak <girish.pathak@arm.com>
>
> I'd like to hear from Girish as well, since he contributed this code originally.
>
> > ---
> > ArmPkg/ArmPkg.dec | 1 +
> > .../ArmScmiDxe/ArmScmiClockProtocolPrivate.h | 7 +
> > ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf | 1 +
> > ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c | 62 +++++++
> > ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h | 198 +++++++++++++++++++++
> > 5 files changed, 269 insertions(+)
> > create mode 100644 ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> >
> > diff --git a/ArmPkg/ArmPkg.dec b/ArmPkg/ArmPkg.dec index
> > d99eb67..2f5e5b3 100644
> > --- a/ArmPkg/ArmPkg.dec
> > +++ b/ArmPkg/ArmPkg.dec
> > @@ -59,6 +59,7 @@
> > ## Arm System Control and Management Interface(SCMI) Clock management protocol
> > ## ArmPkg/Include/Protocol/ArmScmiClockProtocol.h
> > gArmScmiClockProtocolGuid = { 0x91ce67a8, 0xe0aa, 0x4012, { 0xb9,
> > 0x9f, 0xb6, 0xfc, 0xf3, 0x4, 0x8e, 0xaa } }
> > + gArmScmiClock2ProtocolGuid = { 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8,
> > + 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } }
> >
> > ## Arm System Control and Management Interface(SCMI) Clock management protocol
> > ## ArmPkg/Include/Protocol/ArmScmiPerformanceProtocol.h
> > diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> > b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> > index 0d1ec6f..c135bac 100644
> > --- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> > +++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h
> > @@ -59,6 +59,13 @@ typedef struct {
> > CLOCK_RATE_DWORD Rate;
> > } CLOCK_RATE_SET_ATTRIBUTES;
> >
> > +
> > +// Message parameters for CLOCK_CONFIG_SET command.
> > +typedef struct {
> > + UINT32 ClockId;
> > + UINT32 Attributes;
> > +} CLOCK_CONFIG_SET_ATTRIBUTES;
> > +
> > // if ClockAttr Bit[0] is set then clock device is enabled.
> > #define CLOCK_ENABLE_MASK 0x1
> > #define CLOCK_ENABLED(ClockAttr) ((ClockAttr & CLOCK_ENABLE_MASK) ==
> > 1) diff --git a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> > b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> > index 05ce9c0..9b29b9f 100644
> > --- a/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> > +++ b/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
> > @@ -46,6 +46,7 @@
> > [Protocols]
> > gArmScmiBaseProtocolGuid
> > gArmScmiClockProtocolGuid
> > + gArmScmiClock2ProtocolGuid
> > gArmScmiPerformanceProtocolGuid
> >
> > [Depex]
> > diff --git a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > index 64d2afa..c7f27a3 100644
> > --- a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > +++ b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > @@ -19,6 +19,7 @@
> > #include <Library/DebugLib.h>
> > #include <Library/UefiBootServicesTableLib.h>
> > #include <Protocol/ArmScmiClockProtocol.h>
> > +#include <Protocol/ArmScmiClock2Protocol.h>
> >
> > #include "ArmScmiClockProtocolPrivate.h"
> > #include "ScmiPrivate.h"
> > @@ -388,6 +389,53 @@ ClockRateSet (
> > return Status;
> > }
> >
> > +/** Enable/Disable specified clock.
> > +
> > + @param[in] This A Pointer to SCMI_CLOCK_PROTOCOL Instance.
> > + @param[in] ClockId Identifier for the clock device.
> > + @param[in] Enable TRUE to enable, FALSE to disable.
> > +
> > + @retval EFI_SUCCESS Clock enable/disable successful.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +STATIC
> > +EFI_STATUS
> > +ClockEnable (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + IN UINT32 ClockId,
> > + IN BOOLEAN Enable
> > + )
> > +{
> > + EFI_STATUS Status;
> > + CLOCK_CONFIG_SET_ATTRIBUTES *ClockConfigSetAttributes;
> > + SCMI_COMMAND Cmd;
> > + UINT32 PayloadLength;
> > +
> > + Status = ScmiCommandGetPayload
> > + ((UINT32**)&ClockConfigSetAttributes);
> > + if (EFI_ERROR (Status)) {
> > + return Status;
> > + }
> > +
> > + // Fill arguments for clock protocol command.
> > + ClockConfigSetAttributes->ClockId = ClockId;
> > + ClockConfigSetAttributes->Attributes = Enable ? BIT0 : 0;
> > +
> > + Cmd.ProtocolId = SCMI_PROTOCOL_ID_CLOCK; Cmd.MessageId =
> > + SCMI_MESSAGE_ID_CLOCK_CONFIG_SET;
> > +
> > + PayloadLength = sizeof (CLOCK_CONFIG_SET_ATTRIBUTES);
> > +
> > + // Execute and wait for response on a SCMI channel.
> > + Status = ScmiCommandExecute (
> > + &Cmd,
> > + &PayloadLength,
> > + NULL
> > + );
> > +
> > + return Status;
> > +}
> > +
> > // Instance of the SCMI clock management protocol.
> > STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
> > ClockGetVersion,
> > @@ -398,6 +446,18 @@ STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {
> > ClockRateSet
> > };
> >
> > +// Instance of the SCMI clock management protocol.
> > +STATIC CONST SCMI_CLOCK2_PROTOCOL ScmiClock2Protocol = {
> > + (SCMI_CLOCK2_GET_VERSION)ClockGetVersion,
> > + (SCMI_CLOCK2_GET_TOTAL_CLOCKS)ClockGetTotalClocks,
> > + (SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES)ClockGetClockAttributes,
> > + (SCMI_CLOCK2_DESCRIBE_RATES)ClockDescribeRates,
> > + (SCMI_CLOCK2_RATE_GET)ClockRateGet,
> > + (SCMI_CLOCK2_RATE_SET)ClockRateSet,
> > + SCMI_CLOCK2_PROTOCOL_VERSION,
> > + ClockEnable
> > + };
> > +
> > /** Initialize clock management protocol and install protocol on a given handle.
> >
> > @param[in] Handle Handle to install clock management protocol.
> > @@ -413,6 +473,8 @@ ScmiClockProtocolInit (
> > Handle,
> > &gArmScmiClockProtocolGuid,
> > &ScmiClockProtocol,
> > + &gArmScmiClock2ProtocolGuid,
> > + &ScmiClock2Protocol,
> > NULL
> > );
> > }
> > diff --git a/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> > b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> > new file mode 100644
> > index 0000000..f2c9670
> > --- /dev/null
> > +++ b/ArmPkg/Include/Protocol/ArmScmiClock2Protocol.h
> > @@ -0,0 +1,198 @@
> > +/** @file
> > +
> > + Copyright (c) 2017-2018, Arm Limited. All rights reserved.
> > +
> > + This program and the accompanying materials are licensed and made
> > + available under the terms and conditions of the BSD License which
> > + accompanies this distribution. The full text of the license may be
> > + found at http://opensource.org/licenses/bsd-license.php
> > +
> > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> > + BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > +
> > + System Control and Management Interface V1.0
> > + http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/
> > + DEN0056A_System_Control_and_Management_Interface.pdf
> > +**/
> > +
> > +#ifndef ARM_SCMI_CLOCK2_PROTOCOL_H_
> > +#define ARM_SCMI_CLOCK2_PROTOCOL_H_
> > +
> > +#include <Protocol/ArmScmi.h>
> > +#include <Protocol/ArmScmiClockProtocol.h>
> > +
> > +#define ARM_SCMI_CLOCK2_PROTOCOL_GUID { \
> > + 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05,
> > +0xef, 0xcf } \
> > + }
> > +
> > +extern EFI_GUID gArmScmiClock2ProtocolGuid;
> > +
> > +#define SCMI_CLOCK2_PROTOCOL_VERSION 1
> > +
> > +typedef struct _SCMI_CLOCK2_PROTOCOL SCMI_CLOCK2_PROTOCOL;
> > +
> > +// Protocol Interface functions.
> > +
> > +/** Return version of the clock management protocol supported by SCP firmware.
> > +
> > + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> > +
> > + @param[out] Version Version of the supported SCMI Clock management protocol.
> > +
> > + @retval EFI_SUCCESS The version is returned.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *SCMI_CLOCK2_GET_VERSION) (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + OUT UINT32 *Version
> > + );
> > +
> > +/** Return total number of clock devices supported by the clock management
> > + protocol.
> > +
> > + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> > +
> > + @param[out] TotalClocks Total number of clocks supported.
> > +
> > + @retval EFI_SUCCESS Total number of clocks supported is returned.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *SCMI_CLOCK2_GET_TOTAL_CLOCKS) (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + OUT UINT32 *TotalClocks
> > + );
> > +
> > +/** Return attributes of a clock device.
> > +
> > + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> > + @param[in] ClockId Identifier for the clock device.
> > +
> > + @param[out] Enabled If TRUE, the clock device is enabled.
> > + @param[out] ClockAsciiName A NULL terminated ASCII string with the clock
> > + name, of up to 16 bytes.
> > +
> > + @retval EFI_SUCCESS Clock device attributes are returned.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES) (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + IN UINT32 ClockId,
> > + OUT BOOLEAN *Enabled,
> > + OUT CHAR8 *ClockAsciiName
> > + );
> > +
> > +/** Return list of rates supported by a given clock device.
> > +
> > + @param[in] This A pointer to SCMI_CLOCK2_PROTOCOL Instance.
> > + @param[in] ClockId Identifier for the clock device.
> > +
> > + @param[out] Format SCMI_CLOCK_RATE_FORMAT_DISCRETE: Clock device
> > + supports range of clock rates which are non-linear.
> > +
> > + SCMI_CLOCK_RATE_FORMAT_LINEAR: Clock device supports
> > + range of linear clock rates from Min to Max in steps.
> > +
> > + @param[out] TotalRates Total number of rates.
> > +
> > + @param[in,out] RateArraySize Size of the RateArray.
> > +
> > + @param[out] RateArray List of clock rates.
> > +
> > + @retval EFI_SUCCESS List of clock rates are returned.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval EFI_BUFFER_TOO_SMALL RateArraySize is too small for the result.
> > + It has been updated to the size needed.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *SCMI_CLOCK2_DESCRIBE_RATES) (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + IN UINT32 ClockId,
> > + OUT SCMI_CLOCK_RATE_FORMAT *Format,
> > + OUT UINT32 *TotalRates,
> > + IN OUT UINT32 *RateArraySize,
> > + OUT SCMI_CLOCK_RATE *RateArray
> > + );
> > +
> > +/** Get clock rate.
> > +
> > + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> > + @param[in] ClockId Identifier for the clock device.
> > +
> > + @param[out] Rate Clock rate.
> > +
> > + @retval EFI_SUCCESS Clock rate is returned.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *SCMI_CLOCK2_RATE_GET) (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + IN UINT32 ClockId,
> > + OUT UINT64 *Rate
> > + );
> > +
> > +/** Set clock rate.
> > +
> > + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> > + @param[in] ClockId Identifier for the clock device.
> > + @param[in] Rate Clock rate.
> > +
> > + @retval EFI_SUCCESS Clock rate set success.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *SCMI_CLOCK2_RATE_SET) (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + IN UINT32 ClockId,
> > + IN UINT64 Rate
> > + );
> > +
> > +/** Enable/Disable specified clock.
> > + Function is only available under gArmScmiClock2ProtocolGuid
> > +
> > + @param[in] This A Pointer to SCMI_CLOCK2_PROTOCOL Instance.
> > + @param[in] ClockId Identifier for the clock device.
> > + @param[in] Enable TRUE to enable, FALSE to disable.
> > +
> > + @retval EFI_SUCCESS Clock enable/disable successful.
> > + @retval EFI_DEVICE_ERROR SCP returns an SCMI error.
> > + @retval !(EFI_SUCCESS) Other errors.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *SCMI_CLOCK2_ENABLE) (
> > + IN SCMI_CLOCK2_PROTOCOL *This,
> > + IN UINT32 ClockId,
> > + IN BOOLEAN Enable
> > + );
> > +
> > +typedef struct _SCMI_CLOCK2_PROTOCOL {
> > + SCMI_CLOCK2_GET_VERSION GetVersion;
> > + SCMI_CLOCK2_GET_TOTAL_CLOCKS GetTotalClocks;
> > + SCMI_CLOCK2_GET_CLOCK_ATTRIBUTES GetClockAttributes;
> > + SCMI_CLOCK2_DESCRIBE_RATES DescribeRates;
> > + SCMI_CLOCK2_RATE_GET RateGet;
> > + SCMI_CLOCK2_RATE_SET RateSet;
> > +
> > + //Extention to original ClockProtocol, added here so
> > +SCMI_CLOCK2_PROTOCOL
> > + //can be cast to SCMI_CLOCK_PROTOCOL
> > + UINTN Version; //For future expandability of protocol
> > + SCMI_CLOCK2_ENABLE Enable;
> > +} SCMI_CLOCK2_PROTOCOL;
> > +
> > +#endif /* ARM_SCMI_CLOCK2_PROTOCOL_H_ */
> > +
> > --
> > 2.7.4
> >
> IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-12-21 17:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-13 23:48 [PATCH v3] ArmPkg/ArmScmiDxe: Add clock enable function Jeff Brasen
2018-12-21 14:54 ` Ard Biesheuvel
2018-12-21 16:48 ` Girish Pathak
2018-12-21 17:31 ` Ard Biesheuvel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox