From: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
To: Pete Batard <pete@akeo.ie>
Cc: edk2-devel-groups-io <devel@edk2.groups.io>,
"Leif Lindholm" <leif@nuviainc.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Jeremy Linton" <lintonrjeremy@gmail.com>
Subject: Re: [edk2-platforms][PATCH 1/3] Silicon/Broadcom/Net: Add Genet stub driver to setup MAC
Date: Thu, 23 Jan 2020 14:44:10 +0100 [thread overview]
Message-ID: <CAKv+Gu_b_J2_wpf+O6TBWON_6xAfGdaJmM=RFRX8TRV=9kHCYQ@mail.gmail.com> (raw)
In-Reply-To: <20200123120007.4784-2-pete@akeo.ie>
On Thu, 23 Jan 2020 at 13:00, Pete Batard <pete@akeo.ie> wrote:
>
> From: Jeremy Linton <lintonrjeremy@gmail.com>
>
> Add a stub for the Broadcom Genet network interface, that is used
> by the Raspberry Pi 4 (and that may be used by other platforms).
>
> For the time being, the stub only performs UMAC init, using a MAC
> address PCD, as, even without a working network interface in UEFI
> environment, it is desirable if the hardware can describe itself
> for booting in an ACPI environment, rather than pass parameters via
> DSDT/DSD .
>
> Signed-off-by: Pete Batard <pete@akeo.ie>
> ---
> Silicon/Broadcom/Drivers/Net/BcmGenetDxe/BcmGenetDxe.inf | 40 +++++++
> Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.c | 114 ++++++++++++++++++++
> Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.h | 20 ++++
> Silicon/Broadcom/Drivers/Net/BcmNet.dec | 22 ++++
> 4 files changed, 196 insertions(+)
>
> diff --git a/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/BcmGenetDxe.inf b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/BcmGenetDxe.inf
> new file mode 100644
> index 000000000000..9e9301608f24
> --- /dev/null
> +++ b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/BcmGenetDxe.inf
> @@ -0,0 +1,40 @@
> +## @file
> +#
> +# Copyright (c) 2020, Jeremy Linton All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001A
> + BASE_NAME = BcmGenetDxe
> + FILE_GUID = e2b1eaf3-50b7-4ae1-b79e-ec8020cb57ac
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 0.1
> + ENTRY_POINT = GenetEntryPoint
> +
> +[Sources]
> + Genet.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> + Silicon/Broadcom/Drivers/Net/BcmNet.dec
> +
> +[LibraryClasses]
> + ArmLib
> + BaseLib
> + IoLib
> + UefiDriverEntryPoint
> + UefiLib
> +
> +[FixedPcd]
> + gBcmNetTokenSpaceGuid.PcdBcmGenetRegistersAddress
> +
> +[Pcd]
> + gBcmNetTokenSpaceGuid.PcdBcmGenetMacAddress
> +
> +[Depex]
> + TRUE
> diff --git a/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.c b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.c
> new file mode 100644
> index 000000000000..d135d889cc1f
> --- /dev/null
> +++ b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.c
> @@ -0,0 +1,114 @@
> +/** @file
> +
> + Copyright (c) 2020, Jeremy Linton All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + This driver acts like a stub to set the Broadcom
> + Genet MAC address, until the actual network driver
> + is in place.
> +
> +**/
> +
> +#include <Library/ArmLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiLib.h>
> +
> +#include <Genet.h>
> +#include <PiDxe.h>
> +
> +STATIC
> +VOID
> +RMWRegister (
> + UINT32 Offset,
> + UINT32 Mask,
> + UINT32 In
> + )
> +{
> + EFI_PHYSICAL_ADDRESS Addr;
> + UINT32 Data;
> + UINT32 Shift;
> +
> + Addr = GENET_BASE_ADDRESS + Offset;
> + Data = 0;
> + Shift = 1;
> + if (In) {
> + while (!(Mask & Shift))
> + Shift <<= 1;
> + Data = (MmioRead32 (Addr) & ~Mask) | ((In * Shift) & Mask);
> + } else {
> + Data = MmioRead32 (Addr) & ~Mask;
> + }
> +
> + MmioWrite32 (Addr, Data);
> +
> + ArmDataMemoryBarrier ();
> +}
> +
> +STATIC
> +VOID
> +WdRegister (
> + UINT32 Offset,
> + UINT32 In
> + )
> +{
> + EFI_PHYSICAL_ADDRESS Base = GENET_BASE_ADDRESS;
> +
> + MmioWrite32 (Base + Offset, In);
> +
> + ArmDataMemoryBarrier ();
> +}
> +
> +STATIC
> +VOID
> +SetMacAddress (
> + UINT8* MacAddr
> +)
> +{
> + // Bring the UMAC out of reset
> + RMWRegister (GENET_SYS_RBUF_FLUSH_CTRL, 0x2, 1);
> + gBS->Stall (10);
> + RMWRegister (GENET_SYS_RBUF_FLUSH_CTRL, 0x2, 0);
> +
> + // Update the MAC
> + DEBUG ((DEBUG_INFO, "Setting MAC address %02X:%02X:%02X:%02X:%02X:%02X\n",
> + MacAddr[0], MacAddr[1], MacAddr[2], MacAddr[3], MacAddr[4], MacAddr[5]));
> +
> + WdRegister (GENET_UMAC_MAC0, (MacAddr[0] << 24) | (MacAddr[1] << 16) |
> + (MacAddr[2] << 8) | MacAddr[3]);
> + WdRegister (GENET_UMAC_MAC1, (MacAddr[4] << 8) | MacAddr[5]);
> +
> +}
> +
> +/**
> + The entry point of Genet UEFI Driver.
> +
> + @param ImageHandle The image handle of the UEFI Driver.
> + @param SystemTable A pointer to the EFI System Table.
> +
> + @retval EFI_SUCCESS The Driver or UEFI Driver exited normally.
> + @retval EFI_INCOMPATIBLE_VERSION _gUefiDriverRevision is greater than
> + SystemTable->Hdr.Revision.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +GenetEntryPoint (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + UINT64 MacAddr;
> +
> + // Read the MAC address
> + MacAddr = PcdGet64 (PcdBcmGenetMacAddress);
> +
> + if (MacAddr != 0) {
> + SetMacAddress ((UINT8*)&MacAddr);
> + }
> +
> + return EFI_SUCCESS;
> +}
> diff --git a/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.h b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.h
> new file mode 100644
> index 000000000000..4a3827c0e0d1
> --- /dev/null
> +++ b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/Genet.h
> @@ -0,0 +1,20 @@
> +/** @file
> +
> + Copyright (c) 2020, Pete Batard <pete@akeo.ie>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef BCM_GENET_H__
> +#define BCM_GENET_H__
> +
> +#include <Library/PcdLib.h>
> +
> +#define GENET_BASE_ADDRESS (FixedPcdGet64 (PcdBcmGenetRegistersAddress))
> +
> +#define GENET_SYS_RBUF_FLUSH_CTRL 0x0008
> +#define GENET_UMAC_MAC0 0x080c
> +#define GENET_UMAC_MAC1 0x0810
> +
> +#endif /* BCM_GENET_H__ */
> diff --git a/Silicon/Broadcom/Drivers/Net/BcmNet.dec b/Silicon/Broadcom/Drivers/Net/BcmNet.dec
> new file mode 100644
> index 000000000000..d80aac27ed9e
> --- /dev/null
> +++ b/Silicon/Broadcom/Drivers/Net/BcmNet.dec
> @@ -0,0 +1,22 @@
> +## @file
> +#
> +# Copyright (c) 2020, Pete Batard <pete@akeo.ie>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + DEC_SPECIFICATION = 0x0001001A
> + PACKAGE_NAME = BcmNetPkg
> + PACKAGE_GUID = 34E19823-D23A-41AB-9C09-ED1225B32DFF
> + PACKAGE_VERSION = 1.0
> +
> +[Guids]
> + gBcmNetTokenSpaceGuid = {0x12b97d70, 0x9149, 0x4c2f, {0x82, 0xd5, 0xad, 0xa9, 0x1e, 0x92, 0x75, 0xa1}}
> +
> +[PcdsFixedAtBuild]
> + gBcmNetTokenSpaceGuid.PcdBcmGenetRegistersAddress|0x0|UINT32|0x00000001
> +
Can we make this UINT64 please? EFI_PHYSICAL_ADDRESSes are 64-bit in UEFI.
> +[PcdsDynamic]
> + gBcmNetTokenSpaceGuid.PcdBcmGenetMacAddress|0x0|UINT64|0x00000002
> --
> 2.21.0.windows.1
>
next prev parent reply other threads:[~2020-01-23 13:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-23 12:00 [edk2-platforms][PATCH 0/3] Platform/RPi4: Add Genet network driver stub Pete Batard
2020-01-23 12:00 ` [edk2-platforms][PATCH 1/3] Silicon/Broadcom/Net: Add Genet stub driver to setup MAC Pete Batard
2020-01-23 13:44 ` Ard Biesheuvel [this message]
2020-01-23 14:36 ` Pete Batard
2020-01-23 12:00 ` [edk2-platforms][PATCH 2/3] Platform/RPi: Add PlatformPcdLib to set the Genet MAC address Pete Batard
2020-01-23 13:50 ` Ard Biesheuvel
2020-01-23 15:01 ` Pete Batard
2020-01-23 12:00 ` [edk2-platforms][PATCH 3/3] Platform/Rpi4: Enable Broadcom Genet stub driver Pete Batard
2020-01-23 12:00 ` [PATCH] Platform/RPi/Genet: Add Genet stub driver to setup MAC Pete Batard
2020-01-23 12:00 ` [PATCH] Platform/RPi4: Enable BCM GENET stub driver Pete Batard
[not found] ` <15EC824B064B2D10.12514@groups.io>
2020-01-23 12:03 ` [edk2-devel] [PATCH] Platform/RPi/Genet: Add Genet stub driver to setup MAC Pete Batard
[not found] ` <15EC824ADEB49EC2.12514@groups.io>
2020-01-23 12:03 ` [edk2-devel] [PATCH] Platform/RPi4: Enable BCM GENET stub driver Pete Batard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAKv+Gu_b_J2_wpf+O6TBWON_6xAfGdaJmM=RFRX8TRV=9kHCYQ@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox