public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Mike Maslenkin" <mike.maslenkin@gmail.com>
To: devel@edk2.groups.io, ritul.bits@gmail.com
Subject: Re: [edk2-devel] regarding build uefipayload in debug mode in linux
Date: Fri, 3 Feb 2023 02:16:20 +0300	[thread overview]
Message-ID: <CAL77WPBCLNuYX7TE3Smor2aL5GjTvhu=x0gQ2rysFzKJy+3+jw@mail.gmail.com> (raw)
In-Reply-To: <CAHHF-2Lh9k26t-6uCtDsdf4nu=B+1i1=MdK5nCQ0_DqKK5A3dA@mail.gmail.com>

Hi Ritul Guru.

There is a misprint in path to dsc file.
The path should be "UefiPayloadPkg/UefiPayloadPkg.dsc"
But there is another issue with your command line exists.
The instructions you are referred to [1]  contain a sentence:
"NOTE: Pure 32bit UEFI payload support could be added if required
later.", i.e. it won't build.
So, you need to build either pure X64 or X64 build with IA32 entry.

The command line for the latter is:
"build -p UefiPayloadPkg/UefiPayloadPkg.dsc -t GCC5 -a IA32 -a X64"

*[1] https://github.com/tianocore/edk2/blob/master/UefiPayloadPkg/BuildAndIntegrationInstructions.txt#L55

Regards,
Mike.



On Fri, Feb 3, 2023 at 1:37 AM ritul guru <ritul.bits@gmail.com> wrote:
>
>
> Hi,
> I was following below link to build UEfiPayload for coreboot to boot from,
>
> https://github.com/tianocore/edk2/blob/master/UefiPayloadPkg/BuildAndIntegrationInstructions.txt
>
> but getting below error,
> would appreciate help, thanks.
>
>
> ~/src/opensource/edk2 [master| ]
> 03:04 $ build -p UefiPayloadPkg\UefiPayloadPkg.dsc -t GCC5 -a IA32
> Build environment: Linux-5.10.102.1-microsoft-standard-WSL2-x86_64-with-glibc2.29
> Build start time: 03:04:57, Feb.03 2023
>
> WORKSPACE        = /home//src/opensource/edk2
> EDK_TOOLS_PATH   = /home//src/opensource/edk2/BaseTools
> CONF_PATH        = /home//src/opensource/edk2/Conf
> PYTHON_COMMAND   = /usr/bin/python3.8
>
>
> build.py...
>  : error C0DE: Unknown fatal error when processing [/home//src/opensource/edk2/UefiPayloadPkgUefiPayloadPkg.dsc]
>
> (Please send email to devel@edk2.groups.io for help, attaching following call stack trace!)
>
> (Python 3.8.10 on linux) Traceback (most recent call last):
>   File "/home//src/opensource/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2692, in Main
>     MyBuild = Build(Target, Workspace, Option,LogQ)
>   File "/home//src/opensource/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 815, in __init__
>     self.InitPreBuild()
>   File "/home//src/opensource/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1015, in InitPreBuild
>     self.LoadConfiguration()
>   File "/home//src/opensource/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 971, in LoadConfiguration
>     self.GetToolChainAndFamilyFromDsc (self.PlatformFile)
>   File "/home//src/opensource/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 905, in GetToolChainAndFamilyFromDsc
>     dscobj = self.BuildDatabase[File, BuildArch]
>   File "/home//src/opensource/edk2/BaseTools/Source/Python/Workspace/WorkspaceDatabase.py", line 104, in __getitem__
>     BuildObject = self.CreateBuildObject(FilePath, Arch, Target, Toolchain)
>   File "/home//src/opensource/edk2/BaseTools/Source/Python/Workspace/WorkspaceDatabase.py", line 120, in CreateBuildObject
>     MetaFileStorage(self.WorkspaceDb, FilePath, FileType)
>   File "/home//src/opensource/edk2/BaseTools/Source/Python/Workspace/MetaFileTable.py", line 426, in __new__
>     reval = Class._FILE_TABLE_[FileType](*Args)
>   File "/home//src/opensource/edk2/BaseTools/Source/Python/Workspace/MetaFileTable.py", line 303, in __init__
>     MetaFileTable.__init__(self, Cursor, MetaFile, MODEL_FILE_DSC, Temporary, FromItem)
>   File "/home//src/opensource/edk2/BaseTools/Source/Python/Workspace/MetaFileTable.py", line 39, in __init__
>     MetaFile.TimeStamp,
>   File "/home//src/opensource/edk2/BaseTools/Source/Python/Common/Misc.py", line 1539, in TimeStamp
>     return os.stat(self.Path)[8]
>   File "/home//src/opensource/edk2/BaseTools/Source/Python/Common/LongFilePathOs.py", line 51, in stat
>     return os.stat(LongFilePath(path))
> FileNotFoundError: [Errno 2] No such file or directory: '/home//src/opensource/edk2/UefiPayloadPkgUefiPayloadPkg.dsc'
>
>
>
>
>
> Thanks & Regards
> Ritul Guru
> +91-9916513186
> 

  reply	other threads:[~2023-02-02 23:16 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-02 21:39 regarding build uefipayload in debug mode in linux ritul guru
2023-02-02 23:16 ` Mike Maslenkin [this message]
2023-02-03 15:07   ` [edk2-devel] " ritul guru
2023-02-06  0:53     ` Guo, Gua
2023-02-06 11:37       ` ritul guru
2023-02-06 11:47         ` Guo, Gua
2023-02-06 14:21           ` ritul guru
2023-02-06 14:26             ` Guo, Gua
2023-02-06 14:53               ` ritul guru
2023-02-06 14:55                 ` Guo, Gua
2023-02-06 15:12                 ` ritul guru
2023-02-06 15:13                   ` Guo, Gua
2023-02-06 16:51                     ` ritul guru
2023-02-06 17:52                       ` ritul guru
2023-02-06 18:02                         ` ritul guru
2023-02-06 23:08                   ` Guo, Gua

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAL77WPBCLNuYX7TE3Smor2aL5GjTvhu=x0gQ2rysFzKJy+3+jw@mail.gmail.com' \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox