From: "Mike Maslenkin" <mike.maslenkin@gmail.com>
To: "Chang, Abner" <Abner.Chang@amd.com>
Cc: "devel@edk2.groups.io" <devel@edk2.groups.io>,
Nickle Wang <nicklew@nvidia.com>,
Igor Kulchytskyy <igork@ami.com>
Subject: Re: [edk2-devel] [edk2-redfish-client][PATCH V5 1/2] RedfishClientPkg: Set SettingsObject URI as the config language
Date: Mon, 1 Apr 2024 12:25:58 +0300 [thread overview]
Message-ID: <CAL77WPDMO6z-erZ=gTc6P8AgwDRGpk6rrC52LKHFUtDWovqRJw@mail.gmail.com> (raw)
In-Reply-To: <LV8PR12MB9452E9DDE3BA0E05274B099CEA3F2@LV8PR12MB9452.namprd12.prod.outlook.com>
Hi Abner,
Sorry for the delayed response.
Patch looks good to me.
Regards,
Mike.
On Mon, Apr 1, 2024 at 4:23 AM Chang, Abner <Abner.Chang@amd.com> wrote:
>
> [AMD Official Use Only - General]
>
> Hi Mike,
> Just letting you know that I merged this patch set to clean up the backlogs. I believe your comment was addressed in V5. Just let me know if you still find any improper code.
> Thanks
> Abner
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chang,
> > Abner via groups.io
> > Sent: Thursday, March 28, 2024 2:54 PM
> > To: Nickle Wang <nicklew@nvidia.com>; devel@edk2.groups.io; Mike
> > Maslenkin <mike.maslenkin@gmail.com>
> > Cc: Igor Kulchytskyy <igork@ami.com>
> > Subject: Re: [edk2-devel] [edk2-redfish-client][PATCH V5 1/2]
> > RedfishClientPkg: Set SettingsObject URI as the config language
> >
> > [AMD Official Use Only - General]
> >
> > Caution: This message originated from an External Source. Use proper caution
> > when opening attachments, clicking links, or responding.
> >
> >
> > [AMD Official Use Only - General]
> >
> > Hi @Mike Maslenkin, would you like to review this patch again as I addressed
> > your comments in V5 patch set.
> > Thanks
> > Abner
> >
> > > -----Original Message-----
> > > From: Nickle Wang <nicklew@nvidia.com>
> > > Sent: Tuesday, March 26, 2024 8:14 PM
> > > To: Chang, Abner <Abner.Chang@amd.com>; devel@edk2.groups.io
> > > Cc: Igor Kulchytskyy <igork@ami.com>
> > > Subject: RE: [edk2-redfish-client][PATCH V5 1/2] RedfishClientPkg: Set
> > > SettingsObject URI as the config language
> > >
> > > Caution: This message originated from an External Source. Use proper
> > caution
> > > when opening attachments, clicking links, or responding.
> > >
> > >
> > > Thanks for working on this, Abner.
> > >
> > >
> > > Reviewed-by: Nickle Wang <nicklew@nvidia.com>
> > >
> > > Regards,
> > > Nickle
> > >
> > > > -----Original Message-----
> > > > From: abner.chang@amd.com <abner.chang@amd.com>
> > > > Sent: Friday, March 22, 2024 10:41 PM
> > > > To: devel@edk2.groups.io
> > > > Cc: Igor Kulchytskyy <igork@ami.com>; Nickle Wang
> > <nicklew@nvidia.com>
> > > > Subject: [edk2-redfish-client][PATCH V5 1/2] RedfishClientPkg: Set
> > > SettingsObject
> > > > URI as the config language
> > > >
> > > > External email: Use caution opening links or attachments
> > > >
> > > >
> > > > From: Abner Chang <abner.chang@amd.com>
> > > >
> > > > Set SettingsObject URI in @Redfish.Settings resource as the config
> > language
> > > > which is the same as the config language of parent URI that mandates
> > > > @Redfish.Settings.
> > > > With this, we can find the config language of the properties in
> > SettingsObject
> > > URI.
> > > >
> > > > Signed-off-by: Abner Chang <abner.chang@amd.com>
> > > > Cc: Igor Kulchytskyy <igork@ami.com>
> > > > Co-authored-by: Nickle Wang <nicklew@nvidia.com>
> > > > ---
> > > > .../Library/RedfishFeatureUtilityLib.h | 17 ++++
> > > > .../RedfishFeatureUtilityLib.c | 89 ++++++++++++++++---
> > > > .../RedfishConfigLangMapDxe.c | 15 +++-
> > > > 3 files changed, 104 insertions(+), 17 deletions(-)
> > > >
> > > > diff --git a/RedfishClientPkg/Include/Library/RedfishFeatureUtilityLib.h
> > > > b/RedfishClientPkg/Include/Library/RedfishFeatureUtilityLib.h
> > > > index ba9ea01501..3c5f248eb7 100644
> > > > --- a/RedfishClientPkg/Include/Library/RedfishFeatureUtilityLib.h
> > > > +++ b/RedfishClientPkg/Include/Library/RedfishFeatureUtilityLib.h
> > > > @@ -369,6 +369,23 @@ RedfishSetRedfishUri (
> > > > IN EFI_STRING Uri
> > > > );
> > > >
> > > > +/**
> > > > +
> > > > + Save Redfish SettingsObject URI in database for further use.
> > > > +
> > > > + @param[in] ParentUri Parent URI of @Redfish.Settings property.
> > > > + @param[in] SettingObjectUri Redfish SettingsObject Uri to save.
> > > > +
> > > > + @retval EFI_INVALID_PARAMETER SystemId is NULL or EMPTY
> > > > + @retval EFI_SUCCESS Redfish uri is saved
> > > > +
> > > > +**/
> > > > +EFI_STATUS
> > > > +SetRedfishSettingsObjectsUri (
> > > > + IN EFI_STRING ParentUri,
> > > > + IN EFI_STRING SettingObjectUri
> > > > + );
> > > > +
> > > > /**
> > > >
> > > > Get the property name by given Configure Language.
> > > > diff --git
> > > >
> > a/RedfishClientPkg/Library/RedfishFeatureUtilityLib/RedfishFeatureUtilityLib.
> > c
> > > >
> > b/RedfishClientPkg/Library/RedfishFeatureUtilityLib/RedfishFeatureUtilityLib.
> > c
> > > > index cc2b37b796..dda80c4608 100644
> > > > ---
> > > >
> > a/RedfishClientPkg/Library/RedfishFeatureUtilityLib/RedfishFeatureUtilityLib.
> > c
> > > > +++
> > b/RedfishClientPkg/Library/RedfishFeatureUtilityLib/RedfishFeatureUt
> > > > +++ ilityLib.c
> > > > @@ -2082,7 +2082,6 @@ GetConfigureLang (
> > > > EFI_STRING ResultStr;
> > > > EFI_STRING UnicodeUri;
> > > > EFI_STATUS Status;
> > > > - EFI_STRING StrFound;
> > > >
> > > > if (IS_EMPTY_STRING (Uri)) {
> > > > return NULL;
> > > > @@ -2101,18 +2100,6 @@ GetConfigureLang (
> > > > }
> > > >
> > > > ConfigLang = RedfishGetConfigLanguage (UnicodeUri);
> > > > - if (ConfigLang == NULL) {
> > > > - //
> > > > - // @Redfish.Settings share the same schema as its parent.
> > > > - // Remove "Settings" and try again.
> > > > - //
> > > > - StrFound = StrStr (UnicodeUri, L"/Settings");
> > > > - if (StrFound != NULL) {
> > > > - StrFound[0] = L'\0';
> > > > - DEBUG ((REDFISH_DEBUG_TRACE, "%a: \"Settings\" found in URI, try:
> > > %s\n",
> > > > __func__, UnicodeUri));
> > > > - ConfigLang = RedfishGetConfigLanguage (UnicodeUri);
> > > > - }
> > > > - }
> > > >
> > > > FreePool (UnicodeUri);
> > > >
> > > > @@ -2172,6 +2159,64 @@ RedfishSetRedfishUri (
> > > > return mConfigLangMapProtocol->Set (mConfigLangMapProtocol,
> > ConfigLang,
> > > > Uri); }
> > > >
> > > > +/**
> > > > +
> > > > + Save Redfish SettingsObject URI in database for further use.
> > > > +
> > > > + @param[in] ParentUri Parent URI of @Redfish.Settings property.
> > > > + @param[in] SettingObjectUri Redfish SettingsObject Uri to save.
> > > > +
> > > > + @retval EFI_INVALID_PARAMETER ParentUri or SettingObjectUri is
> > NULL.
> > > > + @retval EFI_NOT_FOUND Config language for ParentUri is not
> > found.
> > > > + @retval EFI_SUCCESS Redfish URI is saved with corresponding
> > > > + config language.
> > > > +
> > > > +**/
> > > > +EFI_STATUS
> > > > +SetRedfishSettingsObjectsUri (
> > > > + IN EFI_STRING ParentUri,
> > > > + IN EFI_STRING SettingObjectUri
> > > > + )
> > > > +{
> > > > + EFI_STATUS Status;
> > > > + EFI_STRING ConfigLang;
> > > > +
> > > > + if ((ParentUri == NULL) || (SettingObjectUri == NULL)) {
> > > > + return EFI_INVALID_PARAMETER;
> > > > + }
> > > > +
> > > > + //
> > > > + // Check if the SettingsObject URI already in the database.
> > > > + //
> > > > + Status = EFI_SUCCESS;
> > > > + ConfigLang = RedfishGetConfigLanguage (SettingObjectUri); if
> > > > + (ConfigLang == NULL) {
> > > > + //
> > > > + // No config language of SettingsObject URI is found.
> > > > + // Get the config language of parent URI because the data model of
> > > > + // SettingsObject URI resource is the same as the data model of parent
> > URI.
> > > > + //
> > > > + ConfigLang = RedfishGetConfigLanguage (ParentUri);
> > > > + if (ConfigLang == NULL) {
> > > > + DEBUG ((DEBUG_ERROR, "%a: Failed to get the config language of
> > parent
> > > > URI that mandates SettingsObject - %s.\n", __func__, ParentUri));
> > > > + Status = EFI_NOT_FOUND;
> > > > + } else {
> > > > +
> > > > + // Set the config language of settings URI using parent's URI config
> > > language.
> > > > + Status = RedfishSetRedfishUri (ConfigLang, SettingObjectUri);
> > > > + if (EFI_ERROR (Status)) {
> > > > + DEBUG ((DEBUG_ERROR, "%a: Fails to set the config language of
> > > > SettingsObject - %s.\n", __func__, SettingObjectUri));
> > > > + } else {
> > > > + DEBUG ((DEBUG_INFO, "%a: Set the config language of
> > SettingsObject -
> > > %s:
> > > > SUCCESS.\n", __func__, SettingObjectUri));
> > > > + }
> > > > + FreePool (ConfigLang); // Free the ConfigLang of parent URI.
> > > > + }
> > > > + } else {
> > > > + FreePool (ConfigLang); // Free the ConfigLang of SettingObject URI.
> > > > + }
> > > > + return Status;
> > > > +}
> > > > +
> > > > /**
> > > >
> > > > Get @odata.id from give HTTP payload. It's call responsibility to release
> > > > returned buffer.
> > > > @@ -3532,6 +3577,7 @@ CompareRedfishBooleanArrayValues (
> > > > payload and URI to pending settings. Caller has to release
> > "SettingPayload"
> > > and
> > > > "SettingUri".
> > > >
> > > > + @param[in] RedfishService Instance of REDFISH_SERVICE
> > > > @param[in] Payload Payload that may contain "@Redfish.Settings"
> > > > @param[out] SettingPayload Payload keeps pending settings.
> > > > @param[out] SettingUri URI to pending settings.
> > > > @@ -3552,6 +3598,7 @@ GetPendingSettings (
> > > > EDKII_JSON_VALUE JsonValue;
> > > > UINTN Index;
> > > > EFI_STATUS Status;
> > > > + EFI_STRING StrFound;
> > > >
> > > > if ((RedfishService == NULL) || (Payload == NULL) || (SettingResponse ==
> > > NULL)
> > > > || (SettingUri == NULL)) {
> > > > return EFI_INVALID_PARAMETER;
> > > > @@ -3586,6 +3633,22 @@ GetPendingSettings (
> > > > return Status;
> > > > }
> > > >
> > > > + //
> > > > + // Setting URI exists, check if settings URI is valid or not.
> > > > + //
> > > > + StrFound = StrStr (*SettingUri, L"/Settings");
> > > > + if (StrFound != NULL) {
> > > > + DEBUG ((REDFISH_DEBUG_TRACE, "%a: \"Settings\" found in URI:
> > %s\n",
> > > > __func__, *SettingUri));
> > > > + } else {
> > > > + StrFound = StrStr (*SettingUri, L"/SD");
> > > > + if (StrFound != NULL) {
> > > > + DEBUG ((REDFISH_DEBUG_TRACE, "%a: \"SD\" found in URI: %s\n",
> > > > __func__, *SettingUri));
> > > > + } else {
> > > > + DEBUG ((DEBUG_ERROR, "%a: Not an valid @redfish.settings URI\n",
> > > > __func__, *SettingUri));
> > > > + ASSERT (FALSE);
> > > > + }
> > > > + }
> > > > +
> > > > return EFI_SUCCESS;
> > > > }
> > > >
> > > > diff --git
> > > >
> > a/RedfishClientPkg/RedfishConfigLangMapDxe/RedfishConfigLangMapDxe.c
> > > >
> > b/RedfishClientPkg/RedfishConfigLangMapDxe/RedfishConfigLangMapDxe.c
> > > > index 8c93044580..4071e30c17 100644
> > > > ---
> > a/RedfishClientPkg/RedfishConfigLangMapDxe/RedfishConfigLangMapDxe.c
> > > > +++
> > >
> > b/RedfishClientPkg/RedfishConfigLangMapDxe/RedfishConfigLangMapDxe.c
> > > > @@ -2,6 +2,7 @@
> > > >
> > > > (C) Copyright 2022 Hewlett Packard Enterprise Development LP<BR>
> > > > Copyright (c) 2022-2023, NVIDIA CORPORATION & AFFILIATES. All rights
> > > > reserved.
> > > > + Copyright (C) 2024 Advanced Micro Devices, Inc. All rights
> > > > + reserved.<BR>
> > > >
> > > > SPDX-License-Identifier: BSD-2-Clause-Patent
> > > >
> > > > @@ -606,10 +607,16 @@ RedfishConfigLangMapSet (
> > > > Status = EFI_NOT_FOUND;
> > > > Target = FindConfigLangMapRecord (&Private-
> > >ConfigLangList.ListHeader,
> > > > ConfigLang, FALSE);
> > > > if (Target != NULL) {
> > > > - //
> > > > - // Remove old one and create new one.
> > > > - //
> > > > - Status = DeleteConfigLangMapRecord (&Private->ConfigLangList,
> > Target);
> > > > + if (Uri != NULL) {
> > > > + if (StrCmp (Uri, Target->Uri) == 0) {
> > > > + return EFI_SUCCESS;
> > > > + }
> > > > + } else {
> > > > + //
> > > > + // Remove old one and create new one.
> > > > + //
> > > > + Status = DeleteConfigLangMapRecord (&Private->ConfigLangList,
> > Target);
> > > > + }
> > > > }
> > > >
> > > > //
> > > > --
> > > > 2.37.1.windows.1
> >
> >
> >
> >
> >
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117286): https://edk2.groups.io/g/devel/message/117286
Mute This Topic: https://groups.io/mt/105086466/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
prev parent reply other threads:[~2024-04-01 9:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-22 14:41 [edk2-devel] [edk2-redfish-client][PATCH V5 1/2] RedfishClientPkg: Set SettingsObject URI as the config language Chang, Abner via groups.io
2024-03-22 14:41 ` [edk2-devel] [edk2-redfish-client][PATCH V5 2/2] RedfishClientPkg/FeatureDriver: Use SetRedfishSettingsObjectsUri Chang, Abner via groups.io
2024-03-26 12:13 ` Nickle Wang via groups.io
2024-03-26 12:13 ` [edk2-devel] [edk2-redfish-client][PATCH V5 1/2] RedfishClientPkg: Set SettingsObject URI as the config language Nickle Wang via groups.io
2024-03-28 6:54 ` Chang, Abner via groups.io
[not found] ` <17C0DB2F6517C591.6770@groups.io>
2024-04-01 1:23 ` Chang, Abner via groups.io
2024-04-01 9:25 ` Mike Maslenkin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAL77WPDMO6z-erZ=gTc6P8AgwDRGpk6rrC52LKHFUtDWovqRJw@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox