From: "Sheng Lean Tan" <sheng.tan@9elements.com>
To: devel@edk2.groups.io, sean@starlabs.systems
Cc: Zhichao Gao <zhichao.gao@intel.com>, Ray Ni <ray.ni@intel.com>,
Jian J Wang <jian.j.wang@intel.com>,
Liming Gao <gaoliming@byosoft.com.cn>
Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
Date: Fri, 17 Feb 2023 13:58:41 +0100 [thread overview]
Message-ID: <CAMWxwJ31hNXDAxmFEQnDG5eu67YuzO4A2GQ5+hB8BaYE+Out9g@mail.gmail.com> (raw)
In-Reply-To: <0bf45a3249e00791a6c26554130de2b176dfb958.1671610798.git.sean@starlabs.systems>
[-- Attachment #1: Type: text/plain, Size: 6593 bytes --]
Hi all,
Could you help to review this? thanks.
Best Regards,
*Lean Sheng Tan*
9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany
Email: sheng.tan@9elements.com
Phone: *+49 234 68 94 188 <+492346894188>*
Mobile: *+49 176 76 113842 <+4917676113842>*
Registered office: Bochum
Commercial register: Amtsgericht Bochum, HRB 17519
Management: Sebastian German, Eray Bazaar
Data protection information according to Art. 13 GDPR
<https://9elements.com/privacy>
On Wed, 21 Dec 2022 at 09:20, Sean Rhodes <sean@starlabs.systems> wrote:
> When set to true, the Logo is positioned according to the BGRT
> specification, 38.2% from the top of the screen. When set to false,
> no behaviour is changed and the logo is positioned centrally.
>
> Cc: Zhichao Gao <zhichao.gao@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Signed-off-by: Sean Rhodes <sean@starlabs.systems>
> ---
> MdeModulePkg/MdeModulePkg.dec | 6 ++++++
> MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
> MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
> MdeModulePkg/MdeModulePkg.uni | 6 ++++++
> 4 files changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
> index be5e829ca9..c8bb51df3b 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -2102,6 +2102,12 @@ [PcdsFixedAtBuild, PcdsPatchableInModule,
> PcdsDynamic, PcdsDynamicEx]
> # @Prompt The shared bit mask when Intel Tdx is enabled.
> gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
>
> + ## This PCD sets the position of the Boot Logo.
> + # TRUE - The Logo is positioned following the recommendations from
> Microsoft.
> + # FALSE - The logo is positioned in the center of the screen.
> + # @ Prompt This position of the boot logo
> +
> gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
> +
> [PcdsPatchableInModule]
> ## Specify memory size with page number for PEI code when
> # Loading Module at Fixed Address feature is enabled.
> diff --git a/MdeModulePkg/Logo/LogoDxe.inf b/MdeModulePkg/Logo/LogoDxe.inf
> index 41215d25d8..ce29950089 100644
> --- a/MdeModulePkg/Logo/LogoDxe.inf
> +++ b/MdeModulePkg/Logo/LogoDxe.inf
> @@ -41,6 +41,7 @@ [LibraryClasses]
> UefiBootServicesTableLib
> UefiDriverEntryPoint
> DebugLib
> + PcdLib
>
> [Protocols]
> gEfiHiiDatabaseProtocolGuid ## CONSUMES
> @@ -48,6 +49,9 @@ [Protocols]
> gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
> gEdkiiPlatformLogoProtocolGuid ## PRODUCES
>
> +[Pcd]
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ## CONSUMES
> +
> [Depex]
> gEfiHiiDatabaseProtocolGuid AND
> gEfiHiiImageExProtocolGuid
> diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
> index 8ab874d2da..96e34b2011 100644
> --- a/MdeModulePkg/Logo/Logo.c
> +++ b/MdeModulePkg/Logo/Logo.c
> @@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> #include <Protocol/HiiPackageList.h>
> #include <Library/UefiBootServicesTableLib.h>
> #include <Library/DebugLib.h>
> +#include <Library/PcdLib.h>
>
> typedef struct {
> EFI_IMAGE_ID ImageId;
> @@ -51,12 +52,14 @@ GetImage (
> IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
> IN OUT UINT32 *Instance,
> OUT EFI_IMAGE_INPUT *Image,
> + EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
> OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
> OUT INTN *OffsetX,
> OUT INTN *OffsetY
> )
> {
> - UINT32 Current;
> + UINT32 Current;
> + EFI_STATUS Status;
>
> if ((Instance == NULL) || (Image == NULL) ||
> (Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
> @@ -69,6 +72,29 @@ GetImage (
> return EFI_NOT_FOUND;
> }
>
> + if (PcdGetBool (PcdFollowMicrosoftRecommended)) {
> + //
> + // Get current video resolution and text mode
> + //
> + Status = gBS->HandleProtocol (
> + gST->ConsoleOutHandle,
> + &gEfiGraphicsOutputProtocolGuid,
> + (VOID **)&GraphicsOutput
> + );
> + if (!EFI_ERROR (Status)) {
> + //
> + // Center of LOGO is in the vertical position 38.2% when
> PcdBootLogoOnlyEnable is TRUE
> + // Y = (VerticalResolution - LogoHeight) / 2
> + // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
> + // OffsetY + Y = Y'
> + // OffsetY = Y' - Y = -0.118 * VerticalResolution
> + //
> + *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
> + *OffsetX = 0;
> + *OffsetY = -118 *
> (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
> + }
> + }
> +
> (*Instance)++;
> *Attribute = mLogos[Current].Attribute;
> *OffsetX = mLogos[Current].OffsetX;
> diff --git a/MdeModulePkg/MdeModulePkg.uni b/MdeModulePkg/MdeModulePkg.uni
> index 33ce9f6198..09c1ac1cc1 100644
> --- a/MdeModulePkg/MdeModulePkg.uni
> +++ b/MdeModulePkg/MdeModulePkg.uni
> @@ -1338,3 +1338,9 @@
> #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP
> #language en-US "Indicates if the PCIe Resizable BAR Capability
> Supported.<BR><BR>\n"
>
> "TRUE - PCIe Resizable BAR Capability is
> supported.<BR>\n"
>
> "FALSE - PCIe Resizable BAR Capability is not
> supported.<BR>"
> +
> +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT
> #language en-US "The position of the Boot Logo"
> +
> +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP
> #language en-US "Sets the position of the Logo. When set to true, the Logo
> is positioned following the recommendations"
> +
> " from Microsoft, 38.2% from the top of the screen."
> +
> --
> 2.37.2
>
>
>
> ------------
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#97684): https://edk2.groups.io/g/devel/message/97684
> Mute This Topic: https://groups.io/mt/95802829/6757431
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [sheng.tan@9elements.com
> ]
> ------------
>
>
>
[-- Attachment #2: Type: text/html, Size: 10506 bytes --]
next prev parent reply other threads:[~2023-02-17 12:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-21 8:19 [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo Sean Rhodes
2023-02-17 12:58 ` Sheng Lean Tan [this message]
[not found] ` <17449E1187E223D3.28744@groups.io>
2023-03-06 9:56 ` [edk2-devel] " Sheng Lean Tan
2023-03-07 11:32 ` Sheng Lean Tan
2023-03-08 8:55 ` Sheng Lean Tan
2023-03-08 9:01 ` Sheng Lean Tan
2023-03-08 8:59 ` Sheng Lean Tan
-- strict thread matches above, loose matches on Subject: below --
2022-12-15 21:11 Sean Rhodes
2022-12-15 22:08 ` [edk2-devel] " Michael D Kinney
2022-12-15 22:17 ` Sean Rhodes
2022-12-15 22:54 ` Michael D Kinney
2022-12-16 8:57 ` Sean Rhodes
2022-12-16 15:59 ` Jeshua Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMWxwJ31hNXDAxmFEQnDG5eu67YuzO4A2GQ5+hB8BaYE+Out9g@mail.gmail.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox