* edk2-platform configure serial UART for debugging [not found] <CAMY4mmmV4Q8DhBB3Wf1KDqjGJ5B=G9NeyTCJu3PoxUjAPBKhNw@mail.gmail.com> @ 2020-07-10 10:54 ` avinok 2020-07-10 13:35 ` [edk2-devel] " Andrey V 0 siblings, 1 reply; 3+ messages in thread From: avinok @ 2020-07-10 10:54 UTC (permalink / raw) To: devel [-- Attachment #1: Type: text/plain, Size: 389 bytes --] Hi I maybe missing some steps, because mostly spent time to use SBL (slimbootloader) . I've managed to build Apollo Lake IFWI image for the LeafHill platform. However, I need to use it for our own board based LeafHill. How can I configure UART2 to get a serial message ? I can not see the settings like in coreboot setup or SBL(slim boot) Can someone help me with that? Regards, Andrey [-- Attachment #2: Type: text/html, Size: 692 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [edk2-devel] edk2-platform configure serial UART for debugging 2020-07-10 10:54 ` edk2-platform configure serial UART for debugging avinok @ 2020-07-10 13:35 ` Andrey V 0 siblings, 0 replies; 3+ messages in thread From: Andrey V @ 2020-07-10 13:35 UTC (permalink / raw) To: Andrey V, devel [-- Attachment #1: Type: text/plain, Size: 311 bytes --] the recommendations from: https://software.intel.com/content/dam/develop/external/us/en/documents/uefi-firmware-porting-guide-for-the-intel-atom-processor-e3900-series-820187.pdf to edit: gPlatformModuleTokenSpaceGuid.PcdSerialIoUartNumber|2|UINT8|0x10001011 But how can I set UART2 for serial output ? [-- Attachment #2: Type: text/html, Size: 510 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
* edk2-platform configure serial UART for debugging @ 2020-07-10 10:56 Andrey V 0 siblings, 0 replies; 3+ messages in thread From: Andrey V @ 2020-07-10 10:56 UTC (permalink / raw) To: devel [-- Attachment #1: Type: text/plain, Size: 398 bytes --] Hi I maybe missing some steps, because mostly spent time to use SBL (slimbootloader) . I've managed to build Apollo Lake IFWI image for the LeafHill platform. However, I need to use it for our own board based LeafHill. How can I configure UART2 to get a serial message ? I can not see the settings like in coreboot setup or SBL(slim boot) Can someone help me with that? Regards, Andrey [-- Attachment #2: Type: text/html, Size: 1044 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-10 13:35 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <CAMY4mmmV4Q8DhBB3Wf1KDqjGJ5B=G9NeyTCJu3PoxUjAPBKhNw@mail.gmail.com> 2020-07-10 10:54 ` edk2-platform configure serial UART for debugging avinok 2020-07-10 13:35 ` [edk2-devel] " Andrey V 2020-07-10 10:56 Andrey V
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox