Re: [edk2-devel] [PATCH v2 0/5] Platform/RaspberryPi: Various minor fixes

["Ard Biesheuvel" <ardb@kernel.org>]

On Wed, 17 Jan 2024 at 22:36, Jeremy Linton <jeremy.linton@arm.com> wrote:
>
> This includes a change to always initialize the PL011 to the
> configured baud (which should be 115200 for the SBSA UART), which
> fixes linux's assumption that SBSA UARTs are pre-programmed for
> 115200. This in turn (re)enables the PL011 when the console is on the
> miniuart per the config.txt file.
>
> Also included is another spin with the DT/XHCI reset patch which puts
> removal of the DT node that causes linux to reset the XHCI controller,
> as well as an additional patch that updates the DT to match the PCIe
> MMIO window we have programmed. This cures much of the problem with
> the PCIe/XHCI configuration when booted in DT mode on linux.
>
> There is also a few menu visibility/section tweaks to assure ACPI/DT
> specific settings show up at the appropriate time.
>
> As well as a minor fix to work around a bogus compiler warning.
>
> v1->v2: Ard's review comments.
>         Convert PCIe MMIO address to use the fixedPCDs defined elsewhere
>         Hardcode 115200 for the SBSA UART
>
> Jeremy Linton (5):
>   Platform/RaspberryPi/DualSerialPortLib: Always configure the pl011
>   Silicon/Broadcom/BcmGenetDxe: Suppress some bogus compiler warnings
>   Platform/RaspberryPi: Cleanup menu visibility
>   Platform/RaspberryPi: Give the user control over the XHCI mailbox
>   Platform/RaspberryPi: Update PCIe MMIO window for DT
>

Pushed patches #2 - #5. Thanks.


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#116636): https://edk2.groups.io/g/devel/message/116636
Mute This Topic: https://groups.io/mt/103796306/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-