From: "Ard Biesheuvel" <ardb@kernel.org>
To: devel@edk2.groups.io, lichao@loongson.cn
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>,
Leif Lindholm <quic_llindhol@quicinc.com>,
Sami Mujawar <sami.mujawar@arm.com>,
Gerd Hoffmann <kraxel@redhat.com>,
Jiewen Yao <jiewen.yao@intel.com>
Subject: Re: [edk2-devel] [PATCH v1 0/2] Add a new FdtNorFalshQemuLib and enable it in
Date: Fri, 17 May 2024 09:21:49 +0200 [thread overview]
Message-ID: <CAMj1kXF6FopYEsk1Jz71qHULokEPeo6JFo9Dmnuc2qN4=uTwyA@mail.gmail.com> (raw)
In-Reply-To: <20240517071729.188409-1-lichao@loongson.cn>
Hello Chao Li,
You sent two series in quick succession. Is there any difference
between the two?
On Fri, 17 May 2024 at 09:17, Chao Li <lichao@loongson.cn> wrote:
>
> Patch1: Added a new library called FdtNorFlashQemuLib in OvmfPkg/Library
> which is non-hardcode dependency.
> Patch2: Enable the new library in ArmVirtQemu.dsc and
> ArmVirtQemuKernel.dsc.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4770
>
> I have verified on both of the two platforms:
> Prepare:
> install libvirt, virt-manager, qemu-systemaarch64.
>
> Step 1:
> Built the two platforms with ArmVirtQemu.dsc and
> ArmVirtQemuKernel.dsc, and then using the command create the pflash
> files:
> Build the two platforms firmware using ArmVirtQemu.dsc and
> ArmVirtQemuKernel.dsc, and then create the pflash files using following
> command:
> cat QEMU_EFI.fd /dev/zero | head -c 64m > ./QEMU_EFI-pflash.raw
> cat QEMU_VARS.fd /dev/zero | head -c 64m > ./vars-template-pflash.raw
> qemu-img convert -f raw -O qcow2 -o cluster_size=4096 -S 4096 QEMU_EFI-pflash.raw QEMU_EFI-pflash.qcow2
> qemu-img convert -f raw -O qcow2 -o cluster_size=4096 -S 4096 vars-template-pflash.raw vars-template-pflash.qcow2
>
> Download a AARCH64 QCOW2 image.
> Copy them into /usr/share/edk2/aarch64/.
>
> Step 2:
> Verification the pflash working:
> ArmVirtQemu:
> Run the QEMU ARM virt machine using the following command:
> qemu-system-aarch64 \
> -blockdev '{"driver":"file","filename":"/usr/share/edk2/aarch64/QEMU_EFI-pflash.qcow2","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}' \
> -blockdev '{"node-name":"libvirt-pflash0-format","read-only":true,"driver":"qcow2","file":"libvirt-pflash0-storage"}' \
> -blockdev '{"driver":"file","filename":"/usr/share/edk2/aarch64/vars-template-pflash.qcow2","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' \
> -blockdev '{"node-name":"libvirt-pflash1-format","read-only":false,"driver":"qcow2","file":"libvirt-pflash1-storage"}' \
> -machine virt,pflash0=libvirt-pflash0-format,pflash1=libvirt-pflash1-format,acpi=on \
> -cpu cortex-a57 \
> -m size=2097152k \
> -serial stdio \
> -net none \
> -device ramfb \
> -device nec-usb-xhci \
> -device usb-mouse \
> -device usb-kbd
>
> ArmVirtQemuKernel:
> Run the QEMU kernel ARM virt machine using the following command:
> qemu-system-aarch64 \
> -blockdev '{"driver":"file","filename":"/usr/share/edk2/aarch64/vars-template-pflash.raw","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' \
> -blockdev '{"node-name":"libvirt-pflash1-format","read-only":false,"driver":"raw","file":"libvirt-pflash1-storage"}' \
> -machine virt,usb=off,dump-guest-core=off,gic-version=3,pflash1=libvirt-pflash1-format \
> -cpu cortex-a57 \
> -m 4096 \
> -smp 1,sockets=1,cores=1,threads=1 \
> -no-user-config \
> -nodefaults \
> -device virtio-gpu-pci \
> -kernel /usr/share/edk2/aarch64/QEMU_EFI-pflash.raw \
> -serial stdio \
> -device nec-usb-xhci \
> -device usb-mouse \
> -device usb-kbd \
> -hda /usr/share/edk2/aarch64/openEuler-22.03-LTS-SP3-aarch64.qcow2 \
> -monitor tcp::3333,server,nowait
>
> Step 3:
> After the virt-machines starts, enter "F2" to enter the setup UI, try to
> change the boot order or some ther variables stored in the flash, then
> enter "F10" to save the changes and reboot it.
> After restarting, enter "F2" to enter the setup UI and check whether the
> changes before the restart operation have been saved.
>
>
> Using the above three steps, both platforms will works fine.
>
> I have not created the PR in github yet, I will create it once the edk2
> merge window reopens.
>
> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
> Cc: Leif Lindholm <quic_llindhol@quicinc.com>
> Cc: Sami Mujawar <sami.mujawar@arm.com>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
>
> Chao Li (2):
> OvmfPkg: Add no hardcode version of FtdNorFlashQemuLib
> ArmVirtPkg: Enable the non-hardcode version FtdNorFlashQemuLib
>
> ArmVirtPkg/ArmVirtQemu.dsc | 21 ++-
> ArmVirtPkg/ArmVirtQemuKernel.dsc | 20 ++-
> ArmVirtPkg/VarStore.fdf.inc | 5 +-
> .../FdtNorFlashQemuLib/FdtNorFlashQemuLib.c | 165 ++++++++++++++++++
> .../FdtNorFlashQemuLib/FdtNorFlashQemuLib.inf | 46 +++++
> 5 files changed, 249 insertions(+), 8 deletions(-)
> create mode 100644 OvmfPkg/Library/FdtNorFlashQemuLib/FdtNorFlashQemuLib.c
> create mode 100644 OvmfPkg/Library/FdtNorFlashQemuLib/FdtNorFlashQemuLib.inf
>
> --
> 2.27.0
>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118990): https://edk2.groups.io/g/devel/message/118990
Mute This Topic: https://groups.io/mt/106149594/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2024-05-17 7:22 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-17 7:17 [edk2-devel] [PATCH v1 0/2] Add a new FdtNorFalshQemuLib and enable it in Chao Li
2024-05-17 7:17 ` [edk2-devel] [PATCH v1 1/2] OvmfPkg: Add no hardcode version of FtdNorFlashQemuLib Chao Li
2024-05-24 9:11 ` Marcin Juszkiewicz
2024-05-27 3:17 ` xianglai
2024-05-27 6:38 ` Gerd Hoffmann
2024-05-28 1:43 ` Chao Li
2024-05-17 7:17 ` [edk2-devel] [PATCH v1 2/2] ArmVirtPkg: Enable the non-hardcode version FtdNorFlashQemuLib Chao Li
2024-05-17 7:21 ` Ard Biesheuvel [this message]
2024-05-17 7:33 ` [edk2-devel] [PATCH v1 0/2] Add a new FdtNorFalshQemuLib and enable it in Chao Li
[not found] ` <17D036583CE2D32E.17823@groups.io>
2024-05-24 8:38 ` Chao Li
2024-05-29 9:09 ` Gerd Hoffmann
2024-05-30 3:10 ` Chao Li
2024-05-30 12:35 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMj1kXF6FopYEsk1Jz71qHULokEPeo6JFo9Dmnuc2qN4=uTwyA@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox