Re: [edk2-platforms PATCH 0/4] ACPI MDIO support for Marvell SoCs

["Marcin Wojtas" <mw@semihalf.com>]

Hi Ard,

pon., 19 lip 2021 o 09:28 Ard Biesheuvel <ardb@kernel.org> napisał(a):
>
> On Fri, 16 Jul 2021 at 19:32, Ard Biesheuvel <ardb@kernel.org> wrote:
> >
> > On Mon, 12 Jul 2021 at 13:17, Jon Nettleton <jon@solid-run.com> wrote:
> > >
> > > On Mon, Jul 12, 2021 at 12:52 PM Marcin Wojtas <mw@semihalf.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > wt., 29 cze 2021 o 16:17 Marcin Wojtas <mw@semihalf.com> napisał(a):
> > > > >
> > > > > Hi Leif,
> > > > >
> > > > > pon., 14 cze 2021 o 23:55 Leif Lindholm <leif@nuviainc.com> napisał(a):
> > > > > >
> > > > > > Hi Marcin,
> > > > > >
> > > > > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote:
> > > > > > > Hi,
> > > > > > >
> > > > > > > The MDIO ACPI binding has been established and merged to the
> > > > > > > Linux tree,
> > > > > >
> > > > > > Congratulations! :)
> > > > > >
> > > > > > Is FreeBSD expected to follow suit?
> > > > >
> > > > > There's no driver yet, but once it's finally created I will make sure
> > > > > it supports ACPI properly.
> > > > >
> > > > > >
> > > > > > > hence it is now possible to update the ACPI
> > > > > > > description of the platforms that base on the Marvell SoCs.
> > > > > > >
> > > > > > > For convenience, the code is exposed in the public github branch:
> > > > > > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613
> > > > > > > There is also MacchiatoBin firmware binary avaialable for testing:
> > > > > > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0
> > > > > > >
> > > > > > > I'm looking forward to the comments or remarks.
> > > > > >
> > > > > > The patches themselves look straightforward enough.
> > > > > > I *would* prefer some tested-by, for these sources rather than the
> > > > > > binary, before merging though.
> > > > > >
> > > > >
> > > > > I have some our patches queued, that are blocked by this patchset. In
> > > > > case no time is found for external testers - if this may help to get
> > > > > it pushed through, please see below logs from the next-20210628 tag
> > > > > and unchanged firmware. All network ports of MacchiatoBin and
> > > > > CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO
> > > > > interfaces:
> > > > >
> > > > > MacchiatoBin
> > > > > # uname -a
> > > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29
> > > > > 09:14:07 CEST 2021 aarch64 GNU/Linux
> > > > > # dmesg | grep MRVL0101
> > > > > [    1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0
> > > > > [    1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0
> > > > > [    2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver
> > > > > [mv88x3340] (irq=POLL)
> > > > > [    2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver
> > > > > [mv88x3340] (irq=POLL)
> > > > > # dmesg | grep MRVL0100
> > > > > [    2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver
> > > > > [Marvell 88E1510] (irq=POLL)
> > > > > # dmesg | grep mvpp2
> > > > > [...]
> > > > > [    2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver
> > > > > [mv88x3340] (irq=POLL)
> > > > > [    2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode
> > > > > [    2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver
> > > > > [mv88x3340] (irq=POLL)
> > > > > [    2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode
> > > > > [    2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver
> > > > > [Marvell 88E1510] (irq=POLL)
> > > > > [    2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode
> > > > > [    2.936351] mvpp2 MRVL0110:01 eth4: configuring for
> > > > > inband/2500base-x link mode
> > > > > [    5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow
> > > > > control off
> > > > > #
> > > > >
> > > > > CN913x-DB
> > > > > # uname -a
> > > > > Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29
> > > > > 09:14:07 CEST 2021 aarch64 GNU/Linux
> > > > > # dmesg | grep MRVL0100
> > > > > [    2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver
> > > > > [Marvell 88E1510] (irq=POLL)
> > > > > [    2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver
> > > > > [Marvell 88E1510] (irq=POLL)
> > > > > # dmesg | grep mvpp2
> > > > > [...]
> > > > > [    2.544917] mvpp2 MRVL0110:00 eth1: configuring for
> > > > > inband/10gbase-r link mode
> > > > > [    2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow
> > > > > control rx
> > > > > [    2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver
> > > > > [Marvell 88E1510] (irq=POLL)
> > > > > [    2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode
> > > > > [    2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver
> > > > > [Marvell 88E1510] (irq=POLL)
> > > > > [    2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode
> > > > > [    2.810169] mvpp2 MRVL0110:01 eth4: configuring for
> > > > > inband/10gbase-r link mode
> > > > > [    2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow
> > > > > control rx
> > > > > [    5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow
> > > > > control off
> > > > > [   10.840942] mvpp2 MRVL0110:00 eth1: Link is Down
> > > > > [   10.864124] mvpp2 MRVL0110:01 eth4: Link is Down
> > > > > #
> > > > >
> > > >
> > > > Both platforms were have been additionally tested by Greg, do you have
> > > > any comments/objections to merging this patchset?
> > > >
> > > > Thanks,
> > > > Marcin
> > >
> > > You can add my Tested-by as well.  Finally got time over the weekend
> > > to verify on all my Marvell platforms this effects.
> > >
> >
> > Thanks all. I will get to this shortly - apologies for the delay.
>
> Pushed as bfabeef4c9a6..955187a12a8b
>
> Thanks all.

Thanks a lot! I'd appreciate if you were able to take a look at our
new patchset I just submitted on top of the merged changes.

Best regards,
Marcin