Re: [edk2-platforms: PATCH 06/14] Marvell/Armada7k8k: Add PciExpressLib implementation

["Marcin Wojtas" <mw@semihalf.com>]

czw., 16 maj 2019 o 16:02 Ard Biesheuvel <ard.biesheuvel@linaro.org> napisał(a):
>
> On Thu, 9 May 2019 at 11:54, Marcin Wojtas <mw@semihalf.com> wrote:
> >
> > From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >
> > Implement a special version of PciExpressLib that takes the quirky
> > nature of the Synopsys Designware PCIe IP into account. In particular,
> > we need to ignores config space accesses to all devices on the first
>
> ignore
>
>
> > bus except device 0, because the broadcast nature of type 0 configuration
> > cycles will result in whatever device is in the slot to appear at each
> > of the 32 device positions.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> > ---
> >  Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf |   42 +
> >  Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c   | 1529 ++++++++++++++++++++
> >  2 files changed, 1571 insertions(+)
> >  create mode 100644 Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf
> >  create mode 100644 Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c
> >
> > diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf
> > new file mode 100644
> > index 0000000..8f09820
> > --- /dev/null
> > +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf
> > @@ -0,0 +1,42 @@
> > +## @file
> > +#
> > +#  Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR>
> > +#  Copyright (c) 2019 Marvell International Ltd. All rights reserved.<BR>
> > +#
> > +#  This program and the accompanying materials
> > +#  are licensed and made available under the terms and conditions of the BSD License
> > +#  which accompanies this distribution. The full text of the license may be found at
> > +#  http://opensource.org/licenses/bsd-license.php.
> > +#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > +#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > +#
> > +#
> > +##
> > +
> > +[Defines]
> > +  INF_VERSION                    = 0x0001001B
> > +  BASE_NAME                      = Armada7k8kPciExpressLib
> > +  FILE_GUID                      = f0926204-3061-40ed-8261-2aeccc7914c9
> > +  MODULE_TYPE                    = BASE
> > +  VERSION_STRING                 = 1.0
> > +  LIBRARY_CLASS                  = PciExpressLib
> > +
> > +[Sources]
> > +  PciExpressLib.c
> > +
> > +[Packages]
> > +  ArmPkg/ArmPkg.dec
> > +  MdePkg/MdePkg.dec
> > +
> > +[LibraryClasses]
> > +  BaseLib
> > +  DebugLib
> > +  IoLib
> > +  PcdLib
> > +
> > +[Pcd]
> > +  gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress  ## CONSUMES
> > +
> > +[FixedPcd]
> > +  gArmTokenSpaceGuid.PcdPciBusMin
> > +  gArmTokenSpaceGuid.PcdPciBusMax
> > diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c
> > new file mode 100644
> > index 0000000..8fa2eb6
> > --- /dev/null
> > +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c
> > @@ -0,0 +1,1529 @@
> > +/** @file
> > +
> > +  Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
> > +  Copyright (c) 2019 Marvell International Ltd. All rights reserved.<BR>
> > +
> > +  This program and the accompanying materials
> > +  are licensed and made available under the terms and conditions of the BSD License
> > +  which accompanies this distribution.  The full text of the license may be found at
> > +  http://opensource.org/licenses/bsd-license.php.
> > +
> > +  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > +  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > +
> > +**/
> > +
> > +
> > +#include <Base.h>
> > +
> > +#include <Library/BaseLib.h>
> > +#include <Library/DebugLib.h>
> > +#include <Library/IoLib.h>
> > +#include <Library/PcdLib.h>
> > +#include <Library/PciExpressLib.h>
> > +
> > +/**
> > +  Assert the validity of a PCI address. A valid PCI address should contain 1's
> > +  only in the low 28 bits.
> > +
> > +  @param  A The address to validate.
> > +
> > +**/
> > +#define ASSERT_INVALID_PCI_ADDRESS(A) \
> > +  ASSERT (((A) & ~0xfffffff) == 0)
> > +
> > +/**
> > +  Registers a PCI device so PCI configuration registers may be accessed after
> > +  SetVirtualAddressMap().
> > +
> > +  Registers the PCI device specified by Address so all the PCI configuration
> > +  registers associated with that PCI device may be accessed after SetVirtualAddressMap()
> > +  is called.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +
> > +  @retval RETURN_SUCCESS           The PCI device was registered for runtime access.
> > +  @retval RETURN_UNSUPPORTED       An attempt was made to call this function
> > +                                   after ExitBootServices().
> > +  @retval RETURN_UNSUPPORTED       The resources required to access the PCI device
> > +                                   at runtime could not be mapped.
> > +  @retval RETURN_OUT_OF_RESOURCES  There are not enough resources available to
> > +                                   complete the registration.
> > +
> > +**/
> > +RETURN_STATUS
> > +EFIAPI
> > +PciExpressRegisterForRuntimeAccess (
> > +  IN UINTN  Address
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  return RETURN_UNSUPPORTED;
> > +}
> > +
> > +#define ECAM_BUS_SIZE       SIZE_1MB
> > +#define ECAM_DEV_SIZE       SIZE_32KB
> > +
> > +STATIC
> > +BOOLEAN
> > +IgnoreBusDeviceFunction (
> > +  IN  UINTN   Address
> > +  )
> > +{
> > +  ASSERT (Address >= FixedPcdGet32 (PcdPciBusMin) * ECAM_BUS_SIZE);
> > +  ASSERT (Address < (FixedPcdGet32 (PcdPciBusMax) + 1) * ECAM_BUS_SIZE);
> > +
> > +  //
> > +  // Type 0 configuration cycles don't contain a b/d/f specifier, and so it
> > +  // is up to the bus that delivers them to ensure they only end up at the
> > +  // correct device/function. Sadly, the Synopsys IP does not implement this,
> > +  // and so we have to ignore config space accesses for all devices on the
> > +  // first bus except device 0.
> > +  //
>
> This is not entirely true. Type 0 PCIe config TLPs (as opposed to
> legacy PCI bus cycles) do contain b/d/f specifiers, but the endpoint
> doesn't know its own device number, and so it responds to all of them.
>

Ok, I will update the original comment.

Thanks,
Marcin

> > +  return (Address >= (FixedPcdGet32 (PcdPciBusMin) * ECAM_BUS_SIZE +
> > +                      ECAM_DEV_SIZE) &&
> > +          Address < (FixedPcdGet32 (PcdPciBusMin) + 1) * ECAM_BUS_SIZE);
> > +}
> > +
> > +/**
> > +  Gets the base address of PCI Express.
> > +
> > +  This internal functions retrieves PCI Express Base Address via a PCD entry
> > +  PcdPciExpressBaseAddress.
> > +
> > +  @return The base address of PCI Express.
> > +
> > +**/
> > +VOID*
> > +GetPciExpressBaseAddress (
> > +  VOID
> > +  )
> > +{
> > +  return (VOID*)(UINTN) PcdGet64 (PcdPciExpressBaseAddress);
> > +}
> > +
> > +/**
> > +  Reads an 8-bit PCI configuration register.
> > +
> > +  Reads and returns the 8-bit PCI configuration register specified by Address.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +
> > +  @return The read value from the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressRead8 (
> > +  IN      UINTN                     Address
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioRead8 ((UINTN) GetPciExpressBaseAddress () + Address);
> > +}
> > +
> > +/**
> > +  Writes an 8-bit PCI configuration register.
> > +
> > +  Writes the 8-bit PCI configuration register specified by Address with the
> > +  value specified by Value. Value is returned. This function must guarantee
> > +  that all PCI read and write operations are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  Value   The value to write.
> > +
> > +  @return The value written to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressWrite8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT8                     Value
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioWrite8 ((UINTN) GetPciExpressBaseAddress () + Address, Value);
> > +}
> > +
> > +/**
> > +  Performs a bitwise OR of an 8-bit PCI configuration register with
> > +  an 8-bit value.
> > +
> > +  Reads the 8-bit PCI configuration register specified by Address, performs a
> > +  bitwise OR between the read result and the value specified by
> > +  OrData, and writes the result to the 8-bit PCI configuration register
> > +  specified by Address. The value written to the PCI configuration register is
> > +  returned. This function must guarantee that all PCI read and write operations
> > +  are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  OrData  The value to OR with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressOr8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT8                     OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioOr8 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);
> > +}
> > +
> > +/**
> > +  Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
> > +  value.
> > +
> > +  Reads the 8-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData, and
> > +  writes the result to the 8-bit PCI configuration register specified by
> > +  Address. The value written to the PCI configuration register is returned.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  AndData The value to AND with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressAnd8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT8                     AndData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioAnd8 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);
> > +}
> > +
> > +/**
> > +  Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
> > +  value, followed a  bitwise OR with another 8-bit value.
> > +
> > +  Reads the 8-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData,
> > +  performs a bitwise OR between the result of the AND operation and
> > +  the value specified by OrData, and writes the result to the 8-bit PCI
> > +  configuration register specified by Address. The value written to the PCI
> > +  configuration register is returned. This function must guarantee that all PCI
> > +  read and write operations are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  AndData The value to AND with the PCI configuration register.
> > +  @param  OrData  The value to OR with the result of the AND operation.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressAndThenOr8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT8                     AndData,
> > +  IN      UINT8                     OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioAndThenOr8 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           AndData,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field of a PCI configuration register.
> > +
> > +  Reads the bit field in an 8-bit PCI configuration register. The bit field is
> > +  specified by the StartBit and the EndBit. The value of the bit field is
> > +  returned.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If StartBit is greater than 7, then ASSERT().
> > +  If EndBit is greater than 7, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to read.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..7.
> > +
> > +  @return The value of the bit field read from the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressBitFieldRead8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioBitFieldRead8 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit
> > +           );
> > +}
> > +
> > +/**
> > +  Writes a bit field to a PCI configuration register.
> > +
> > +  Writes Value to the bit field of the PCI configuration register. The bit
> > +  field is specified by the StartBit and the EndBit. All other bits in the
> > +  destination PCI configuration register are preserved. The new value of the
> > +  8-bit register is returned.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If StartBit is greater than 7, then ASSERT().
> > +  If EndBit is greater than 7, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  Value     The new value of the bit field.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressBitFieldWrite8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT8                     Value
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioBitFieldWrite8 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           Value
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
> > +  writes the result back to the bit field in the 8-bit port.
> > +
> > +  Reads the 8-bit PCI configuration register specified by Address, performs a
> > +  bitwise OR between the read result and the value specified by
> > +  OrData, and writes the result to the 8-bit PCI configuration register
> > +  specified by Address. The value written to the PCI configuration register is
> > +  returned. This function must guarantee that all PCI read and write operations
> > +  are serialized. Extra left bits in OrData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If StartBit is greater than 7, then ASSERT().
> > +  If EndBit is greater than 7, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  OrData    The value to OR with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressBitFieldOr8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT8                     OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioBitFieldOr8 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
> > +  AND, and writes the result back to the bit field in the 8-bit register.
> > +
> > +  Reads the 8-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData, and
> > +  writes the result to the 8-bit PCI configuration register specified by
> > +  Address. The value written to the PCI configuration register is returned.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized. Extra left bits in AndData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If StartBit is greater than 7, then ASSERT().
> > +  If EndBit is greater than 7, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  AndData   The value to AND with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressBitFieldAnd8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT8                     AndData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioBitFieldAnd8 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           AndData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
> > +  bitwise OR, and writes the result back to the bit field in the
> > +  8-bit port.
> > +
> > +  Reads the 8-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND followed by a bitwise OR between the read result and
> > +  the value specified by AndData, and writes the result to the 8-bit PCI
> > +  configuration register specified by Address. The value written to the PCI
> > +  configuration register is returned. This function must guarantee that all PCI
> > +  read and write operations are serialized. Extra left bits in both AndData and
> > +  OrData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If StartBit is greater than 7, then ASSERT().
> > +  If EndBit is greater than 7, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..7.
> > +  @param  AndData   The value to AND with the PCI configuration register.
> > +  @param  OrData    The value to OR with the result of the AND operation.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT8
> > +EFIAPI
> > +PciExpressBitFieldAndThenOr8 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT8                     AndData,
> > +  IN      UINT8                     OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xff;
> > +  }
> > +  return MmioBitFieldAndThenOr8 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           AndData,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a 16-bit PCI configuration register.
> > +
> > +  Reads and returns the 16-bit PCI configuration register specified by Address.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +
> > +  @return The read value from the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressRead16 (
> > +  IN      UINTN                     Address
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioRead16 ((UINTN) GetPciExpressBaseAddress () + Address);
> > +}
> > +
> > +/**
> > +  Writes a 16-bit PCI configuration register.
> > +
> > +  Writes the 16-bit PCI configuration register specified by Address with the
> > +  value specified by Value. Value is returned. This function must guarantee
> > +  that all PCI read and write operations are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  Value   The value to write.
> > +
> > +  @return The value written to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressWrite16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT16                    Value
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioWrite16 ((UINTN) GetPciExpressBaseAddress () + Address, Value);
> > +}
> > +
> > +/**
> > +  Performs a bitwise OR of a 16-bit PCI configuration register with
> > +  a 16-bit value.
> > +
> > +  Reads the 16-bit PCI configuration register specified by Address, performs a
> > +  bitwise OR between the read result and the value specified by
> > +  OrData, and writes the result to the 16-bit PCI configuration register
> > +  specified by Address. The value written to the PCI configuration register is
> > +  returned. This function must guarantee that all PCI read and write operations
> > +  are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  OrData  The value to OR with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressOr16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT16                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioOr16 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);
> > +}
> > +
> > +/**
> > +  Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
> > +  value.
> > +
> > +  Reads the 16-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData, and
> > +  writes the result to the 16-bit PCI configuration register specified by
> > +  Address. The value written to the PCI configuration register is returned.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  AndData The value to AND with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressAnd16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT16                    AndData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioAnd16 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);
> > +}
> > +
> > +/**
> > +  Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
> > +  value, followed a  bitwise OR with another 16-bit value.
> > +
> > +  Reads the 16-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData,
> > +  performs a bitwise OR between the result of the AND operation and
> > +  the value specified by OrData, and writes the result to the 16-bit PCI
> > +  configuration register specified by Address. The value written to the PCI
> > +  configuration register is returned. This function must guarantee that all PCI
> > +  read and write operations are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  AndData The value to AND with the PCI configuration register.
> > +  @param  OrData  The value to OR with the result of the AND operation.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressAndThenOr16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT16                    AndData,
> > +  IN      UINT16                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioAndThenOr16 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           AndData,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field of a PCI configuration register.
> > +
> > +  Reads the bit field in a 16-bit PCI configuration register. The bit field is
> > +  specified by the StartBit and the EndBit. The value of the bit field is
> > +  returned.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +  If StartBit is greater than 15, then ASSERT().
> > +  If EndBit is greater than 15, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to read.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..15.
> > +
> > +  @return The value of the bit field read from the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressBitFieldRead16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioBitFieldRead16 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit
> > +           );
> > +}
> > +
> > +/**
> > +  Writes a bit field to a PCI configuration register.
> > +
> > +  Writes Value to the bit field of the PCI configuration register. The bit
> > +  field is specified by the StartBit and the EndBit. All other bits in the
> > +  destination PCI configuration register are preserved. The new value of the
> > +  16-bit register is returned.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +  If StartBit is greater than 15, then ASSERT().
> > +  If EndBit is greater than 15, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  Value     The new value of the bit field.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressBitFieldWrite16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT16                    Value
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioBitFieldWrite16 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           Value
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
> > +  writes the result back to the bit field in the 16-bit port.
> > +
> > +  Reads the 16-bit PCI configuration register specified by Address, performs a
> > +  bitwise OR between the read result and the value specified by
> > +  OrData, and writes the result to the 16-bit PCI configuration register
> > +  specified by Address. The value written to the PCI configuration register is
> > +  returned. This function must guarantee that all PCI read and write operations
> > +  are serialized. Extra left bits in OrData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +  If StartBit is greater than 15, then ASSERT().
> > +  If EndBit is greater than 15, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  OrData    The value to OR with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressBitFieldOr16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT16                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioBitFieldOr16 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
> > +  AND, and writes the result back to the bit field in the 16-bit register.
> > +
> > +  Reads the 16-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData, and
> > +  writes the result to the 16-bit PCI configuration register specified by
> > +  Address. The value written to the PCI configuration register is returned.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized. Extra left bits in AndData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +  If StartBit is greater than 15, then ASSERT().
> > +  If EndBit is greater than 15, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  AndData   The value to AND with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressBitFieldAnd16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT16                    AndData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioBitFieldAnd16 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           AndData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
> > +  bitwise OR, and writes the result back to the bit field in the
> > +  16-bit port.
> > +
> > +  Reads the 16-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND followed by a bitwise OR between the read result and
> > +  the value specified by AndData, and writes the result to the 16-bit PCI
> > +  configuration register specified by Address. The value written to the PCI
> > +  configuration register is returned. This function must guarantee that all PCI
> > +  read and write operations are serialized. Extra left bits in both AndData and
> > +  OrData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 16-bit boundary, then ASSERT().
> > +  If StartBit is greater than 15, then ASSERT().
> > +  If EndBit is greater than 15, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..15.
> > +  @param  AndData   The value to AND with the PCI configuration register.
> > +  @param  OrData    The value to OR with the result of the AND operation.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT16
> > +EFIAPI
> > +PciExpressBitFieldAndThenOr16 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT16                    AndData,
> > +  IN      UINT16                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffff;
> > +  }
> > +  return MmioBitFieldAndThenOr16 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           AndData,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a 32-bit PCI configuration register.
> > +
> > +  Reads and returns the 32-bit PCI configuration register specified by Address.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +
> > +  @return The read value from the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressRead32 (
> > +  IN      UINTN                     Address
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioRead32 ((UINTN) GetPciExpressBaseAddress () + Address);
> > +}
> > +
> > +/**
> > +  Writes a 32-bit PCI configuration register.
> > +
> > +  Writes the 32-bit PCI configuration register specified by Address with the
> > +  value specified by Value. Value is returned. This function must guarantee
> > +  that all PCI read and write operations are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  Value   The value to write.
> > +
> > +  @return The value written to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressWrite32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT32                    Value
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioWrite32 ((UINTN) GetPciExpressBaseAddress () + Address, Value);
> > +}
> > +
> > +/**
> > +  Performs a bitwise OR of a 32-bit PCI configuration register with
> > +  a 32-bit value.
> > +
> > +  Reads the 32-bit PCI configuration register specified by Address, performs a
> > +  bitwise OR between the read result and the value specified by
> > +  OrData, and writes the result to the 32-bit PCI configuration register
> > +  specified by Address. The value written to the PCI configuration register is
> > +  returned. This function must guarantee that all PCI read and write operations
> > +  are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  OrData  The value to OR with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressOr32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT32                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioOr32 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);
> > +}
> > +
> > +/**
> > +  Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
> > +  value.
> > +
> > +  Reads the 32-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData, and
> > +  writes the result to the 32-bit PCI configuration register specified by
> > +  Address. The value written to the PCI configuration register is returned.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  AndData The value to AND with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressAnd32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT32                    AndData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +return MmioAnd32 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);
> > +}
> > +
> > +/**
> > +  Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
> > +  value, followed a  bitwise OR with another 32-bit value.
> > +
> > +  Reads the 32-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData,
> > +  performs a bitwise OR between the result of the AND operation and
> > +  the value specified by OrData, and writes the result to the 32-bit PCI
> > +  configuration register specified by Address. The value written to the PCI
> > +  configuration register is returned. This function must guarantee that all PCI
> > +  read and write operations are serialized.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +
> > +  @param  Address The address that encodes the PCI Bus, Device, Function and
> > +                  Register.
> > +  @param  AndData The value to AND with the PCI configuration register.
> > +  @param  OrData  The value to OR with the result of the AND operation.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressAndThenOr32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINT32                    AndData,
> > +  IN      UINT32                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioAndThenOr32 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           AndData,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field of a PCI configuration register.
> > +
> > +  Reads the bit field in a 32-bit PCI configuration register. The bit field is
> > +  specified by the StartBit and the EndBit. The value of the bit field is
> > +  returned.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +  If StartBit is greater than 31, then ASSERT().
> > +  If EndBit is greater than 31, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to read.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..31.
> > +
> > +  @return The value of the bit field read from the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressBitFieldRead32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioBitFieldRead32 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit
> > +           );
> > +}
> > +
> > +/**
> > +  Writes a bit field to a PCI configuration register.
> > +
> > +  Writes Value to the bit field of the PCI configuration register. The bit
> > +  field is specified by the StartBit and the EndBit. All other bits in the
> > +  destination PCI configuration register are preserved. The new value of the
> > +  32-bit register is returned.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +  If StartBit is greater than 31, then ASSERT().
> > +  If EndBit is greater than 31, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  Value     The new value of the bit field.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressBitFieldWrite32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT32                    Value
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioBitFieldWrite32 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           Value
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
> > +  writes the result back to the bit field in the 32-bit port.
> > +
> > +  Reads the 32-bit PCI configuration register specified by Address, performs a
> > +  bitwise OR between the read result and the value specified by
> > +  OrData, and writes the result to the 32-bit PCI configuration register
> > +  specified by Address. The value written to the PCI configuration register is
> > +  returned. This function must guarantee that all PCI read and write operations
> > +  are serialized. Extra left bits in OrData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +  If StartBit is greater than 31, then ASSERT().
> > +  If EndBit is greater than 31, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  OrData    The value to OR with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressBitFieldOr32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT32                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioBitFieldOr32 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
> > +  AND, and writes the result back to the bit field in the 32-bit register.
> > +
> > +  Reads the 32-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND between the read result and the value specified by AndData, and
> > +  writes the result to the 32-bit PCI configuration register specified by
> > +  Address. The value written to the PCI configuration register is returned.
> > +  This function must guarantee that all PCI read and write operations are
> > +  serialized. Extra left bits in AndData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +  If StartBit is greater than 31, then ASSERT().
> > +  If EndBit is greater than 31, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  AndData   The value to AND with the PCI configuration register.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressBitFieldAnd32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT32                    AndData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioBitFieldAnd32 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           AndData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
> > +  bitwise OR, and writes the result back to the bit field in the
> > +  32-bit port.
> > +
> > +  Reads the 32-bit PCI configuration register specified by Address, performs a
> > +  bitwise AND followed by a bitwise OR between the read result and
> > +  the value specified by AndData, and writes the result to the 32-bit PCI
> > +  configuration register specified by Address. The value written to the PCI
> > +  configuration register is returned. This function must guarantee that all PCI
> > +  read and write operations are serialized. Extra left bits in both AndData and
> > +  OrData are stripped.
> > +
> > +  If Address > 0x0FFFFFFF, then ASSERT().
> > +  If Address is not aligned on a 32-bit boundary, then ASSERT().
> > +  If StartBit is greater than 31, then ASSERT().
> > +  If EndBit is greater than 31, then ASSERT().
> > +  If EndBit is less than StartBit, then ASSERT().
> > +  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> > +
> > +  @param  Address   The PCI configuration register to write.
> > +  @param  StartBit  The ordinal of the least significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  EndBit    The ordinal of the most significant bit in the bit field.
> > +                    Range 0..31.
> > +  @param  AndData   The value to AND with the PCI configuration register.
> > +  @param  OrData    The value to OR with the result of the AND operation.
> > +
> > +  @return The value written back to the PCI configuration register.
> > +
> > +**/
> > +UINT32
> > +EFIAPI
> > +PciExpressBitFieldAndThenOr32 (
> > +  IN      UINTN                     Address,
> > +  IN      UINTN                     StartBit,
> > +  IN      UINTN                     EndBit,
> > +  IN      UINT32                    AndData,
> > +  IN      UINT32                    OrData
> > +  )
> > +{
> > +  ASSERT_INVALID_PCI_ADDRESS (Address);
> > +  if (IgnoreBusDeviceFunction (Address)) {
> > +    return 0xffffffff;
> > +  }
> > +  return MmioBitFieldAndThenOr32 (
> > +           (UINTN) GetPciExpressBaseAddress () + Address,
> > +           StartBit,
> > +           EndBit,
> > +           AndData,
> > +           OrData
> > +           );
> > +}
> > +
> > +/**
> > +  Reads a range of PCI configuration registers into a caller supplied buffer.
> > +
> > +  Reads the range of PCI configuration registers specified by StartAddress and
> > +  Size into the buffer specified by Buffer. This function only allows the PCI
> > +  configuration registers from a single PCI function to be read. Size is
> > +  returned. When possible 32-bit PCI configuration read cycles are used to read
> > +  from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
> > +  and 16-bit PCI configuration read cycles may be used at the beginning and the
> > +  end of the range.
> > +
> > +  If StartAddress > 0x0FFFFFFF, then ASSERT().
> > +  If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
> > +  If Size > 0 and Buffer is NULL, then ASSERT().
> > +
> > +  @param  StartAddress  The starting address that encodes the PCI Bus, Device,
> > +                        Function and Register.
> > +  @param  Size          The size in bytes of the transfer.
> > +  @param  Buffer        The pointer to a buffer receiving the data read.
> > +
> > +  @return Size read data from StartAddress.
> > +
> > +**/
> > +UINTN
> > +EFIAPI
> > +PciExpressReadBuffer (
> > +  IN      UINTN                     StartAddress,
> > +  IN      UINTN                     Size,
> > +  OUT     VOID                      *Buffer
> > +  )
> > +{
> > +  UINTN   ReturnValue;
> > +
> > +  ASSERT_INVALID_PCI_ADDRESS (StartAddress);
> > +  ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
> > +
> > +  if (Size == 0) {
> > +    return Size;
> > +  }
> > +
> > +  ASSERT (Buffer != NULL);
> > +
> > +  //
> > +  // Save Size for return
> > +  //
> > +  ReturnValue = Size;
> > +
> > +  if ((StartAddress & 1) != 0) {
> > +    //
> > +    // Read a byte if StartAddress is byte aligned
> > +    //
> > +    *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);
> > +    StartAddress += sizeof (UINT8);
> > +    Size -= sizeof (UINT8);
> > +    Buffer = (UINT8*)Buffer + 1;
> > +  }
> > +
> > +  if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
> > +    //
> > +    // Read a word if StartAddress is word aligned
> > +    //
> > +    WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16 (StartAddress));
> > +
> > +    StartAddress += sizeof (UINT16);
> > +    Size -= sizeof (UINT16);
> > +    Buffer = (UINT16*)Buffer + 1;
> > +  }
> > +
> > +  while (Size >= sizeof (UINT32)) {
> > +    //
> > +    // Read as many double words as possible
> > +    //
> > +    WriteUnaligned32 ((UINT32 *) Buffer, (UINT32) PciExpressRead32 (StartAddress));
> > +
> > +    StartAddress += sizeof (UINT32);
> > +    Size -= sizeof (UINT32);
> > +    Buffer = (UINT32*)Buffer + 1;
> > +  }
> > +
> > +  if (Size >= sizeof (UINT16)) {
> > +    //
> > +    // Read the last remaining word if exist
> > +    //
> > +    WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16 (StartAddress));
> > +    StartAddress += sizeof (UINT16);
> > +    Size -= sizeof (UINT16);
> > +    Buffer = (UINT16*)Buffer + 1;
> > +  }
> > +
> > +  if (Size >= sizeof (UINT8)) {
> > +    //
> > +    // Read the last remaining byte if exist
> > +    //
> > +    *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);
> > +  }
> > +
> > +  return ReturnValue;
> > +}
> > +
> > +/**
> > +  Copies the data in a caller supplied buffer to a specified range of PCI
> > +  configuration space.
> > +
> > +  Writes the range of PCI configuration registers specified by StartAddress and
> > +  Size from the buffer specified by Buffer. This function only allows the PCI
> > +  configuration registers from a single PCI function to be written. Size is
> > +  returned. When possible 32-bit PCI configuration write cycles are used to
> > +  write from StartAddress to StartAddress + Size. Due to alignment restrictions,
> > +  8-bit and 16-bit PCI configuration write cycles may be used at the beginning
> > +  and the end of the range.
> > +
> > +  If StartAddress > 0x0FFFFFFF, then ASSERT().
> > +  If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
> > +  If Size > 0 and Buffer is NULL, then ASSERT().
> > +
> > +  @param  StartAddress  The starting address that encodes the PCI Bus, Device,
> > +                        Function and Register.
> > +  @param  Size          The size in bytes of the transfer.
> > +  @param  Buffer        The pointer to a buffer containing the data to write.
> > +
> > +  @return Size written to StartAddress.
> > +
> > +**/
> > +UINTN
> > +EFIAPI
> > +PciExpressWriteBuffer (
> > +  IN      UINTN                     StartAddress,
> > +  IN      UINTN                     Size,
> > +  IN      VOID                      *Buffer
> > +  )
> > +{
> > +  UINTN                             ReturnValue;
> > +
> > +  ASSERT_INVALID_PCI_ADDRESS (StartAddress);
> > +  ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
> > +
> > +  if (Size == 0) {
> > +    return 0;
> > +  }
> > +
> > +  ASSERT (Buffer != NULL);
> > +
> > +  //
> > +  // Save Size for return
> > +  //
> > +  ReturnValue = Size;
> > +
> > +  if ((StartAddress & 1) != 0) {
> > +    //
> > +    // Write a byte if StartAddress is byte aligned
> > +    //
> > +    PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);
> > +    StartAddress += sizeof (UINT8);
> > +    Size -= sizeof (UINT8);
> > +    Buffer = (UINT8*)Buffer + 1;
> > +  }
> > +
> > +  if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
> > +    //
> > +    // Write a word if StartAddress is word aligned
> > +    //
> > +    PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
> > +    StartAddress += sizeof (UINT16);
> > +    Size -= sizeof (UINT16);
> > +    Buffer = (UINT16*)Buffer + 1;
> > +  }
> > +
> > +  while (Size >= sizeof (UINT32)) {
> > +    //
> > +    // Write as many double words as possible
> > +    //
> > +    PciExpressWrite32 (StartAddress, ReadUnaligned32 ((UINT32*)Buffer));
> > +    StartAddress += sizeof (UINT32);
> > +    Size -= sizeof (UINT32);
> > +    Buffer = (UINT32*)Buffer + 1;
> > +  }
> > +
> > +  if (Size >= sizeof (UINT16)) {
> > +    //
> > +    // Write the last remaining word if exist
> > +    //
> > +    PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
> > +    StartAddress += sizeof (UINT16);
> > +    Size -= sizeof (UINT16);
> > +    Buffer = (UINT16*)Buffer + 1;
> > +  }
> > +
> > +  if (Size >= sizeof (UINT8)) {
> > +    //
> > +    // Write the last remaining byte if exist
> > +    //
> > +    PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);
> > +  }
> > +
> > +  return ReturnValue;
> > +}
> > --
> > 2.7.4
> >