* [edk2-devel] [edk2-platforms PATCH 1/1] Silicon/Marvell/OdysseyPkg: New Marvell Odyssey processor
@ 2023-11-30 15:14 Narinder Dhillon
2023-12-08 16:37 ` Marcin Wojtas via groups.io
0 siblings, 1 reply; 2+ messages in thread
From: Narinder Dhillon @ 2023-11-30 15:14 UTC (permalink / raw)
To: devel; +Cc: quic_llindhol, mw, sbalcerak, Narinder Dhillon
From: Narinder Dhillon <ndhillon@marvell.com>
This patch adds support for Marvell Odyssey processor.
It contains only the very basic elements needed to boot to EDK2 UiApp.
- ARM BL31 firmware component copies EDK2 image into memory, so it is
always executing from memory
- There is a SMC library to get system information from BL31
- There are drivers to get board configuration details from a device
tree
- There is no on-chip RTC, a dummy driver is used
- Emulated variable storage is used for now
Signed-off-by: Narinder Dhillon <ndhillon@marvell.com>
---
Platform/Marvell/OdysseyPkg/OdysseyPkg.dsc | 216 ++++++++++
Platform/Marvell/OdysseyPkg/OdysseyPkg.fdf | 304 +++++++++++++
.../Drivers/Fdt/FdtClientDxe/FdtClientDxe.c | 382 ++++++++++++++++
.../Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf | 43 ++
.../Drivers/Fdt/FdtPlatformDxe/FdtPlatform.c | 361 ++++++++++++++++
.../Drivers/Fdt/FdtPlatformDxe/FdtPlatform.h | 102 +++++
.../Fdt/FdtPlatformDxe/FdtPlatformDxe.inf | 60 +++
.../Fdt/FdtPlatformDxe/FdtPlatformDxe.uni | 106 +++++
.../Drivers/Fdt/FdtPlatformDxe/README.txt | 69 +++
.../Drivers/Fdt/FdtPlatformDxe/ShellDumpFdt.c | 283 ++++++++++++
.../Marvell/Drivers/Null/RtcNull/RtcNullDxe.c | 281 ++++++++++++
.../Marvell/Drivers/Null/RtcNull/RtcNullDxe.h | 41 ++
.../Drivers/Null/RtcNull/RtcNullDxe.inf | 46 ++
.../Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c | 408 ++++++++++++++++++
.../Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf | 45 ++
.../AArch64/ArmPlatformHelper.S | 86 ++++
.../Library/ArmPlatformLib/ArmPlatformLib.c | 79 ++++
.../Library/ArmPlatformLib/ArmPlatformLib.inf | 55 +++
.../ArmPlatformLib/ArmPlatformLibMem.c | 131 ++++++
Silicon/Marvell/Library/SmcLib/SmcLib.c | 189 ++++++++
Silicon/Marvell/Library/SmcLib/SmcLib.inf | 32 ++
.../Include/Library/SmcLib.h | 71 +++
.../Include/Protocol/FdtClient.h | 180 ++++++++
.../MarvellSiliconPkg/MarvellSiliconPkg.dec | 19 +
Silicon/Marvell/OdysseyPkg/OdysseyPkg.dsc.inc | 394 +++++++++++++++++
.../PrePi/AArch64/ModuleEntryPoint.S | 136 ++++++
.../ArmPlatformPkg/PrePi/PeiMPCore.inf | 110 +++++
.../Override/ArmPlatformPkg/PrePi/PrePi.c | 238 ++++++++++
28 files changed, 4467 insertions(+)
create mode 100644 Platform/Marvell/OdysseyPkg/OdysseyPkg.dsc
create mode 100644 Platform/Marvell/OdysseyPkg/OdysseyPkg.fdf
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.c
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.c
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.h
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.inf
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.uni
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/README.txt
create mode 100644 Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/ShellDumpFdt.c
create mode 100644 Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.c
create mode 100644 Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.h
create mode 100644 Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.inf
create mode 100644 Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c
create mode 100644 Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf
create mode 100644 Silicon/Marvell/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
create mode 100644 Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.c
create mode 100644 Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.inf
create mode 100644 Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLibMem.c
create mode 100644 Silicon/Marvell/Library/SmcLib/SmcLib.c
create mode 100644 Silicon/Marvell/Library/SmcLib/SmcLib.inf
create mode 100644 Silicon/Marvell/MarvellSiliconPkg/Include/Library/SmcLib.h
create mode 100644 Silicon/Marvell/MarvellSiliconPkg/Include/Protocol/FdtClient.h
create mode 100644 Silicon/Marvell/OdysseyPkg/OdysseyPkg.dsc.inc
create mode 100644 Silicon/Marvell/Override/ArmPlatformPkg/PrePi/AArch64/ModuleEntryPoint.S
create mode 100644 Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PeiMPCore.inf
create mode 100644 Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PrePi.c
diff --git a/Platform/Marvell/OdysseyPkg/OdysseyPkg.dsc b/Platform/Marvell/OdysseyPkg/OdysseyPkg.dsc
new file mode 100644
index 0000000000..ade2faa8bb
--- /dev/null
+++ b/Platform/Marvell/OdysseyPkg/OdysseyPkg.dsc
@@ -0,0 +1,216 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2023 Marvell
+#
+# The main build description file for OdysseyPkg.
+#**/
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = OdysseyPkg # PLAT=ody
+ PLATFORM_GUID = 7E7000DE-F50F-46AE-9B2C-903225F72B13
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x00010005
+!ifdef $(EDK2_OUT_DIR) # Custom output directory, e.g. -D EDK2_OUT_DIR=Build/XYZ
+ OUTPUT_DIRECTORY = $(EDK2_OUT_DIR)
+!else
+ OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
+!endif
+ SUPPORTED_ARCHITECTURES = AARCH64
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = Platform/Marvell/$(PLATFORM_NAME)/$(PLATFORM_NAME).fdf
+
+# dsc.inc file can be used in case there are different variants/boards of Odyssey family.
+# Per-board additional components shall be defined in exclusive dsc.inc files.
+!include Silicon/Marvell/$(PLATFORM_NAME)/$(PLATFORM_NAME).dsc.inc
+
+[LibraryClasses]
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf # used by PlatformSmbiosDxe
+ ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+ ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf # used by SmcLib
+
+ TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf # used by SpiNorDxe
+
+ # USB Requirements
+ UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf # used by UsbKbDxe
+ RegisterFilterLib|MdePkg/Library/RegisterFilterLibNull/RegisterFilterLibNull.inf
+
+[LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION, LibraryClasses.common.DXE_RUNTIME_DRIVER, LibraryClasses.common.DXE_DRIVER]
+ PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+ SafeIntLib|MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf # used by BaseBmpSupportLib
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ RngLib|MdePkg/Library/BaseRngLib/BaseRngLib.inf
+!endif
+# ShellPkg/Application/Shell/Shell.inf -> UefiShellCommandLib -> OrderedCollectionLib
+ OrderedCollectionLib|MdePkg/Library/BaseOrderedCollectionRedBlackTreeLib/BaseOrderedCollectionRedBlackTreeLib.inf
+ VariablePolicyHelperLib|MdeModulePkg/Library/VariablePolicyHelperLib/VariablePolicyHelperLib.inf
+ BmpSupportLib|MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf # used by CapsuleApp
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+
+[BuildOptions]
+# GCC will generate code that runs on processors as idicated by -march
+# Single = (append) allows flags appendixes coming from [BuildOptions] defined in specific INFs.
+ GCC:*_*_AARCH64_PLATFORM_FLAGS = -DPLAT=0xBF -march=armv8.2-a -fdiagnostics-color -fno-diagnostics-show-caret
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFixedAtBuild.common]
+
+ # Generic Watchdog
+ gArmTokenSpaceGuid.PcdGenericWatchdogControlBase|0x8020000A0000
+ gArmTokenSpaceGuid.PcdGenericWatchdogRefreshBase|0x8020000B0000
+ gArmTokenSpaceGuid.PcdGenericWatchdogEl2IntrNum|0x1A
+
+ # BIT0 - Initialization message.<BR>
+ # BIT1 - Warning message.<BR>
+ # BIT2 - Load Event message.<BR>
+ # BIT3 - File System message.<BR>
+ # BIT6 - Information message.<BR>
+ # DEBUG_ERROR 0x80000000 // Error
+ # NOTE: Adjust according to needs. See MdePkg.dec for bits definition.
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000004F
+
+ # The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x00040000
+
+ gArmTokenSpaceGuid.PcdVFPEnabled|1
+
+ # Set ARM PCD: Odyssey: up to 80 Neoverse V2 cores (code named Demeter)
+ # Used to setup secondary cores stacks and ACPI PPTT.
+ gArmPlatformTokenSpaceGuid.PcdCoreCount|80
+
+ # Stacks for MPCores in Normal World, Non-Trusted DRAM
+ gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x2E000000
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+
+ # System Memory (40 - 1TB of DRAM)
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x00004000000
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x10000000000
+
+ # Size of the region used by UEFI in permanent memory (Reserved 128MB)
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x08000000
+
+ ## PL011 - Serial Terminal
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x87e028000000
+
+ # ARM General Interrupt Controller
+ gArmTokenSpaceGuid.PcdGicDistributorBase|0x801000000000
+ gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x801000080000
+ gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x801000020000
+
+ # Hardcoded terminal: TTYTERM, NOT defined in UEFI SPEC
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
+
+ # UART port Divisor setting based on clock 16.66Mhz and baud 115200
+ gArmPlatformTokenSpaceGuid.PL011UartInteger|9
+ gArmPlatformTokenSpaceGuid.PL011UartFractional|2
+
+[PcdsDynamicDefault.common]
+
+ # Indicates if Variable driver will enable emulated variable NV mode.
+ # Reset by SpiNorDxe driver when SPI is in place and can handle storing EFI Variables.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|TRUE
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components]
+
+ #
+ # SEC Phase modules
+ #
+
+ # UEFI is placed in RAM by bootloader
+ Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PeiMPCore.inf {
+ <LibraryClasses>
+ # SoC specific implementation of ArmPlatformLib
+ ArmPlatformLib|Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.inf
+ }
+
+ #
+ # PEI Phase modules
+ #
+ # PEI phase is skipped. SEC jumps directly to DXE.
+
+ #
+ # Core DXE modules
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+ }
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+
+ #
+ # DXE Status codes
+ #
+!if $(DEBUG) == 1
+ MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
+ MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
+!endif
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
+ <LibraryClasses>
+ NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
+ }
+ SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!else
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+!endif
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+ VariablePolicyLib|MdeModulePkg/Library/VariablePolicyLib/VariablePolicyLibRuntimeDxe.inf
+ }
+
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf
+ EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+ # Produces gEfiFaultTolerantWriteProtocolGuid needed for non-volatile UEFI variable storage.
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+
+ #
+ # RTC Support
+ Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.inf
+
+ #
+ # ARM Support
+ #
+ ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
diff --git a/Platform/Marvell/OdysseyPkg/OdysseyPkg.fdf b/Platform/Marvell/OdysseyPkg/OdysseyPkg.fdf
new file mode 100644
index 0000000000..b8822a0340
--- /dev/null
+++ b/Platform/Marvell/OdysseyPkg/OdysseyPkg.fdf
@@ -0,0 +1,304 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2023 Marvell
+#
+# The main Flash Description File for OdysseyPkg.
+#**/
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.ODYSSEY_AARCH64_EFI] # Name must match with FV_PREFIX from bootloader/uefi/Makefile
+BaseAddress = 0x04000000|gArmTokenSpaceGuid.PcdFdBaseAddress # UEFI in DRAM + 64MB.
+Size = 0x01000000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (16MiB).
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0x1000
+
+# 2.5 M should be enough for all modules
+0x00000000|0x00820000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 16 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+FvNameGuid = d248e9b7-9ce3-43a7-868e-70c17c4b3819
+
+ APRIORI DXE {
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf # gEfiPcdProtocolGuid
+ INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf # gHardwareInterruptProtocolGuid
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf # gEfiCpuArchProtocolGuid
+ }
+
+ #
+ # Core DXE modules
+ #
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf # (in OdysseyPkg.dsc.inc)
+
+ #
+ # DXE Status codes
+ #
+!if $(DEBUG) == 1
+ INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
+ INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
+!endif
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!endif
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ INF Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf
+ INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+ # Produces gEfiFaultTolerantWriteProtocolGuid needed for non-volatile UEFI variable storage.
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+
+ # RTC Support
+ INF Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.inf
+
+ #
+ # ARM Support
+ #
+ INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF ShellPkg/Application/Shell/Shell.inf
+
+ INF ShellPkg/DynamicCommand/DpDynamicCommand/DpDynamicCommand.inf
+ INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
+
+ INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ INF MdeModulePkg/Application/UiApp/UiApp.inf
+
+ # FV Filesystem
+ INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
+
+ # SectionExtraction
+ INF MdeModulePkg/Universal/SectionExtractionDxe/SectionExtractionDxe.inf
+
+ #
+ # FDT support
+ #
+ # The UEFI driver is at the end of the list of the driver to be dispatched
+ # after the device drivers (eg: Ethernet) to ensure we have support for them.
+ INF Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.inf
+ INF Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ #
+ # SEC Phase modules
+ #
+ INF Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PeiMPCore.inf
+
+ #
+ # PEI Phase modules
+ #
+ # PEI phase is skipped. SEC jumps directly to DXE.
+
+ #
+ # DXE Phase modules stored in separate LZMA compressed FV.
+ #
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
+[Rule.Common.SEC]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.PEI_CORE]
+ FILE PEI_CORE = $(NAMED_GUID) FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM]
+ FILE PEIM = $(NAMED_GUID) FIXED {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+ FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+ }
+
+[Rule.Common.DXE_CORE]
+ FILE DXE_CORE = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_APPLICATION]
+ FILE APPLICATION = $(NAMED_GUID) {
+ UI STRING ="$(MODULE_NAME)" Optional
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional |.depex
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.UEFI_APPLICATION.BINARY]
+ FILE APPLICATION = $(NAMED_GUID) {
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.c b/Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.c
new file mode 100644
index 0000000000..aa4f773458
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.c
@@ -0,0 +1,382 @@
+/** @file
+* FDT client driver
+*
+* Copyright (c) 2016, Cavium Inc. All rights reserved.<BR>
+* Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#include <Uefi.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/HobLib.h>
+#include <libfdt.h>
+
+#include <Guid/FdtHob.h>
+
+#include <Protocol/FdtClient.h>
+
+STATIC VOID *mDeviceTreeBase;
+
+STATIC
+EFI_STATUS
+GetNodeProperty (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ IN CONST CHAR8 *PropertyName,
+ OUT CONST VOID **Prop,
+ OUT UINT32 *PropSize OPTIONAL
+ )
+{
+ INT32 Len;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Prop != NULL);
+
+ *Prop = fdt_getprop (mDeviceTreeBase, Node, PropertyName, &Len);
+ if (*Prop == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (PropSize != NULL) {
+ *PropSize = Len;
+ }
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+SetNodeProperty (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ IN CONST CHAR8 *PropertyName,
+ IN CONST VOID *Prop,
+ IN UINT32 PropSize
+ )
+{
+ INT32 Ret;
+
+ ASSERT (mDeviceTreeBase != NULL);
+
+ Ret = fdt_setprop (mDeviceTreeBase, Node, PropertyName, Prop, PropSize);
+ if (Ret != 0) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+FindCompatibleNode (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST CHAR8 *CompatibleString,
+ IN FDT_HANDLE PrevNode,
+ OUT FDT_HANDLE *Node
+ )
+{
+ FDT_HANDLE Offset;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Node != NULL);
+
+ Offset = fdt_node_offset_by_compatible (mDeviceTreeBase, PrevNode, CompatibleString);
+
+ if (Offset < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ *Node = Offset;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetOrInsertChosenNode (
+ IN FDT_CLIENT_PROTOCOL *This,
+ OUT INT32 *Node
+ )
+{
+ INT32 NewNode;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Node != NULL);
+
+ NewNode = fdt_path_offset (mDeviceTreeBase, "/chosen");
+
+ if (NewNode < 0) {
+ NewNode = fdt_add_subnode (mDeviceTreeBase, 0, "/chosen");
+ }
+
+ if (NewNode < 0) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ *Node = NewNode;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetNodeDepth (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ OUT INT32 *Depth
+)
+{
+ *Depth = fdt_node_depth (mDeviceTreeBase, Node);
+
+ if (*Depth < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetParentNode (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ OUT FDT_HANDLE *Parent
+)
+{
+ *Parent = fdt_parent_offset (mDeviceTreeBase, Node);
+
+ if (*Parent < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetNode (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST CHAR8 *Path,
+ OUT FDT_HANDLE *Node
+)
+{
+ *Node = fdt_path_offset (mDeviceTreeBase, Path);
+
+ if (*Node < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetNodePath (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Node,
+ OUT CHAR8 *Path,
+ IN INT32 Size
+)
+{
+ INT32 Result;
+
+ Result = fdt_get_path (mDeviceTreeBase, Node, Path, Size);
+
+ if (Result < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetNodeByPropertyValue (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE StartNode,
+ IN CHAR8 *Property,
+ IN VOID *Value,
+ IN INT32 Size,
+ OUT FDT_HANDLE *Node
+)
+{
+ INT32 Offset;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Node != NULL);
+
+ Offset = fdt_node_offset_by_prop_value (mDeviceTreeBase, StartNode,
+ Property, Value,
+ Size);
+
+ if (Offset < 0) {
+ DEBUG ((DEBUG_ERROR, "Result: %d\n", Offset));
+ return EFI_NOT_FOUND;
+ }
+
+ *Node = Offset;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetSubnodeByPropertyValue(
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Parent,
+ IN CHAR8 *PropertyName,
+ IN VOID *PropertyValue,
+ IN INT32 PropertyLength,
+ OUT FDT_HANDLE *Node
+)
+{
+ INT32 Offset;
+ CONST VOID *Property;
+ INT32 Length;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Node != NULL);
+
+ Offset = fdt_first_subnode (mDeviceTreeBase, Parent);
+
+ while (Offset > 0) {
+ Property = fdt_getprop (mDeviceTreeBase, Offset, PropertyName, &Length);
+
+ if ((Property != NULL) &&
+ (PropertyLength == Length) &&
+ (CompareMem (Property, PropertyValue, Length) == 0)) {
+ *Node = Offset;
+ return EFI_SUCCESS;
+ }
+
+ Offset = fdt_next_subnode(mDeviceTreeBase, Offset);
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+STATIC
+EFI_STATUS
+GetNodeByPHandle (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE PHandle,
+ OUT FDT_HANDLE *Node
+)
+{
+ INT32 Offset;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Node != NULL);
+
+ Offset = fdt_node_offset_by_phandle (mDeviceTreeBase, PHandle);
+
+ if (Offset < 0) {
+ DEBUG ((DEBUG_ERROR, "Result: %d\n", Offset));
+ return EFI_NOT_FOUND;
+ }
+
+ *Node = Offset;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetFirstSubnode (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Parent,
+ OUT FDT_HANDLE *Node
+)
+{
+ INT32 Offset;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Node != NULL);
+
+ Offset = fdt_first_subnode (mDeviceTreeBase, Parent);
+
+ if (Offset < 0) {
+ DEBUG ((DEBUG_ERROR, "Result: %d\n", Offset));
+ return EFI_NOT_FOUND;
+ }
+
+ *Node = Offset;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+GetNextSubnode (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Subnode,
+ OUT FDT_HANDLE *Next
+)
+{
+ INT32 Offset;
+
+ ASSERT (mDeviceTreeBase != NULL);
+ ASSERT (Next != NULL);
+
+ Offset = fdt_next_subnode (mDeviceTreeBase, Subnode);
+
+ if (Offset < 0) {
+ DEBUG ((DEBUG_ERROR, "Result: %d\n", Offset));
+ return EFI_NOT_FOUND;
+ }
+
+ *Next = Offset;
+
+ return EFI_SUCCESS;
+}
+
+STATIC FDT_CLIENT_PROTOCOL mFdtClientProtocol = {
+ GetNodeProperty,
+ SetNodeProperty,
+ FindCompatibleNode,
+ GetOrInsertChosenNode,
+ GetNodeDepth,
+ GetParentNode,
+ GetNode,
+ GetNodePath,
+ GetNodeByPropertyValue,
+ GetSubnodeByPropertyValue,
+ GetNodeByPHandle,
+ GetFirstSubnode,
+ GetNextSubnode
+};
+
+EFI_STATUS
+EFIAPI
+InitializeFdtClientDxe (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ VOID *Hob;
+ VOID *DeviceTreeBase;
+
+ Hob = GetFirstGuidHob (&gFdtHobGuid);
+
+ if (Hob == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ DeviceTreeBase = GET_GUID_HOB_DATA (Hob);
+ mDeviceTreeBase = (VOID *)*(UINT64 *)DeviceTreeBase;
+ if (fdt_check_header (mDeviceTreeBase)) {
+ DEBUG ((DEBUG_ERROR, "No DTB found @ 0x%p\n", DeviceTreeBase));
+ return EFI_NOT_FOUND;
+ }
+
+ DEBUG ((DEBUG_INFO, "DTB @ 0x%p\n", mDeviceTreeBase));
+
+ return gBS->InstallMultipleProtocolInterfaces (&ImageHandle,
+ &gFdtClientProtocolGuid, &mFdtClientProtocol,
+ NULL);
+}
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf b/Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf
new file mode 100644
index 0000000000..23bcf8810f
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf
@@ -0,0 +1,43 @@
+## @file
+# FDT client driver
+#
+# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = FdtClientDxe
+ FILE_GUID = 9A871B00-1C16-4F61-8D2C-93B6654B5AD6
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InitializeFdtClientDxe
+
+[Sources]
+ FdtClientDxe.c
+
+[Packages]
+ Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ FdtLib
+ HobLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gFdtClientProtocolGuid ## PRODUCES
+
+[Guids]
+ gFdtHobGuid
+ gFdtTableGuid
+
+[Depex]
+ TRUE
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.c b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.c
new file mode 100644
index 0000000000..8faa135003
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.c
@@ -0,0 +1,361 @@
+/** @file
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+ https://spdx.org/licenses
+
+ Copyright (C) 2023 Marvell
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+**/
+
+#include "FdtPlatform.h"
+
+#include <PiDxe.h>
+
+#include <Library/PcdLib.h>
+#include <Library/BdsLib.h>
+#include <Library/HobLib.h>
+#include <Library/MemoryAllocationLib.h>
+
+#include <Guid/FdtHob.h>
+
+//
+// Internal variables
+//
+
+STATIC CONST EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL mShellDynCmdProtocolDumpFdt = {
+ L"dumpfdt", // Name of the command
+ ShellDynCmdDumpFdtHandler, // Handler
+ ShellDynCmdDumpFdtGetHelp // GetHelp
+};
+
+STATIC CONST EFI_GUID mFdtPlatformDxeHiiGuid = {
+ 0x8afa7610, 0x62b1, 0x46aa,
+ {0xb5, 0x34, 0xc3, 0xde, 0xff, 0x39, 0x77, 0x8c}
+ };
+
+EFI_HANDLE mFdtPlatformDxeHiiHandle;
+VOID *mFdtBlobBase;
+
+EFI_STATUS
+DeleteFdtNode (
+ IN VOID *FdtAddr,
+ CONST CHAR8 *NodePath,
+ CONST CHAR8 *Compatible
+)
+{
+ INTN Offset = -1;
+ INTN Return;
+
+ if ((NodePath != NULL) && (Compatible != NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (NodePath != NULL) {
+ Offset = fdt_path_offset (FdtAddr, NodePath);
+
+ DEBUG ((DEBUG_INFO, "Offset: %d\n", Offset));
+
+ if (Offset < 0) {
+ DEBUG ((DEBUG_ERROR, "Error getting the device node %a offset: %a\n",
+ NodePath, fdt_strerror (Offset)));
+ return EFI_NOT_FOUND;
+ }
+ }
+
+ if (Compatible != NULL) {
+ Offset = fdt_node_offset_by_compatible (FdtAddr, -1, Compatible);
+
+ DEBUG ((DEBUG_INFO, "Offset: %d\n", Offset));
+
+ if (Offset < 0) {
+ DEBUG ((DEBUG_ERROR, "Error getting the device node for %a offset: %a\n",
+ Compatible, fdt_strerror (Offset)));
+ return EFI_NOT_FOUND;
+ }
+ }
+
+ if (Offset >= 0) {
+ Return = fdt_del_node (FdtAddr, Offset);
+
+ DEBUG ((DEBUG_INFO, "Return: %d\n", Return));
+
+ if (Return < 0) {
+ DEBUG ((DEBUG_ERROR, "Error deleting the device node %a: %a\n",
+ NodePath, fdt_strerror (Return)));
+ return EFI_NOT_FOUND;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+DeleteRtcNode (
+ IN VOID *FdtAddr
+ )
+{
+ INT32 Offset, NameLen, Return;
+ BOOLEAN Found;
+ CONST CHAR8 *Name;
+
+ Found = FALSE;
+ for (Offset = fdt_next_node(FdtAddr, 0, NULL);
+ Offset >= 0;
+ Offset = fdt_next_node(FdtAddr, Offset, NULL)) {
+
+ Name = fdt_get_name(FdtAddr, Offset, &NameLen);
+ if (!Name) {
+ continue;
+ }
+
+ if ((Name[0] == 'r') && (Name[1] == 't') && (Name[2] == 'c')) {
+ Found = TRUE;
+ break;
+ }
+ }
+
+ if (Found == TRUE) {
+ Return = fdt_del_node (FdtAddr, Offset);
+
+ if (Return < 0) {
+ DEBUG ((DEBUG_ERROR, "Error deleting the device node %a\n", Name));
+ return EFI_NOT_FOUND;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+FdtFixup(
+ IN VOID *FdtAddr
+ )
+{
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ if (FeaturePcdGet(PcdFixupFdt)) {
+ Status |= DeleteFdtNode (FdtAddr, (CHAR8*)PcdGetPtr (PcdFdtConfigRootNode), NULL);
+
+ // Hide the RTC
+ Status |= DeleteRtcNode (FdtAddr);
+ }
+
+ if (!EFI_ERROR(Status)) {
+ fdt_pack(FdtAddr);
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Install the FDT specified by its device path in text form.
+
+ @retval EFI_SUCCESS The FDT was installed.
+ @retval EFI_NOT_FOUND Failed to locate a protocol or a file.
+ @retval EFI_INVALID_PARAMETER Invalid device path.
+ @retval EFI_UNSUPPORTED Device path not supported.
+ @retval EFI_OUT_OF_RESOURCES An allocation failed.
+**/
+STATIC
+EFI_STATUS
+InstallFdt (
+ VOID
+)
+{
+ EFI_STATUS Status;
+ UINTN FdtBlobSize;
+ VOID *FdtConfigurationTableBase;
+ VOID *HobList;
+ EFI_HOB_GUID_TYPE *GuidHob;
+
+ //
+ // Get the HOB list. If it is not present, then ASSERT.
+ //
+ HobList = GetHobList ();
+ ASSERT (HobList != NULL);
+
+ //
+ // Search for FDT GUID HOB. If it is not present, then
+ // there's nothing we can do. It may not exist on the update path.
+ //
+ GuidHob = GetNextGuidHob (&gFdtHobGuid, HobList);
+ if (GuidHob != NULL) {
+ mFdtBlobBase = (VOID *)*(UINT64 *)(GET_GUID_HOB_DATA (GuidHob));
+ FdtBlobSize = fdt_totalsize((VOID *)mFdtBlobBase);
+
+ //
+ // Ensure that the FDT header is valid and that the Size of the Device Tree
+ // is smaller than the size of the read file
+ //
+ if (fdt_check_header (mFdtBlobBase)) {
+ DEBUG ((DEBUG_ERROR, "InstallFdt() - FDT blob seems to be corrupt\n"));
+ mFdtBlobBase = NULL;
+ Status = EFI_LOAD_ERROR;
+ goto Error;
+ }
+ } else {
+ Status = EFI_NOT_FOUND;
+ goto Error;
+ }
+
+ Status = EFI_SUCCESS;
+
+ if (FeaturePcdGet(PcdPublishFdt)) {
+ FdtConfigurationTableBase = AllocateRuntimeCopyPool (FdtBlobSize, mFdtBlobBase);
+
+ if (FdtConfigurationTableBase == NULL) {
+ goto Error;
+ }
+
+ Status = FdtFixup((VOID*)FdtConfigurationTableBase);
+
+ if (EFI_ERROR (Status)) {
+ FreePool (FdtConfigurationTableBase);
+ goto Error;
+ }
+
+ //
+ // Install the FDT into the Configuration Table
+ //
+ Status = gBS->InstallConfigurationTable (
+ &gFdtTableGuid,
+ FdtConfigurationTableBase
+ );
+
+ if (EFI_ERROR (Status)) {
+ FreePool (FdtConfigurationTableBase);
+ }
+ }
+
+Error:
+ return Status;
+}
+
+/**
+ Main entry point of the FDT platform driver.
+
+ @param[in] ImageHandle The firmware allocated handle for the present driver
+ UEFI image.
+ @param[in] *SystemTable A pointer to the EFI System table.
+
+ @retval EFI_SUCCESS The driver was initialized.
+ @retval EFI_OUT_OF_RESOURCES The "End of DXE" event could not be allocated or
+ there was not enough memory in pool to install
+ the Shell Dynamic Command protocol.
+ @retval EFI_LOAD_ERROR Unable to add the HII package.
+
+**/
+EFI_STATUS
+FdtPlatformEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ //
+ // Install the Device Tree from its expected location
+ //
+ Status = InstallFdt ();
+
+ ASSERT_EFI_ERROR(Status);
+
+ //
+ // Register the strings for the user interface in the HII Database.
+ // This shows the way to the multi-language support, even if
+ // only the English language is actually supported. The strings to register
+ // are stored in the "ShellSetFdtStrings[]" array. This array is
+ // built by the building process from the "*.uni" file associated to
+ // the present driver (cf. FdtPlatfromDxe.inf). Examine your Build
+ // folder under your package's DEBUG folder and you will find the array
+ // defined in a xxxStrDefs.h file.
+ //
+ mFdtPlatformDxeHiiHandle = HiiAddPackages (
+ &mFdtPlatformDxeHiiGuid,
+ ImageHandle,
+ FdtPlatformDxeStrings,
+ NULL
+ );
+ if (mFdtPlatformDxeHiiHandle != NULL) {
+ // We install dynamic EFI command on separate handles as we cannot register
+ // more than one protocol of the same protocol interface on the same handle.
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Handle,
+ &gEfiShellDynamicCommandProtocolGuid,
+ &mShellDynCmdProtocolDumpFdt,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ HiiRemovePackages (mFdtPlatformDxeHiiHandle);
+ }
+ } else {
+ Status = EFI_LOAD_ERROR;
+ }
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_WARN,
+ "Unable to install \"dumpfdt\" EFI Shell command - %r \n",
+ Status
+ ));
+ }
+
+ return Status;
+}
+
+/**
+ Transcode one of the EFI return code used by the model into an EFI Shell return code.
+
+ @param[in] Status EFI return code.
+
+ @return Transcoded EFI Shell return code.
+
+**/
+SHELL_STATUS
+EfiCodeToShellCode (
+ IN EFI_STATUS Status
+ )
+{
+ SHELL_STATUS ShellStatus;
+
+ switch (Status) {
+ case EFI_SUCCESS :
+ ShellStatus = SHELL_SUCCESS;
+ break;
+
+ case EFI_INVALID_PARAMETER :
+ ShellStatus = SHELL_INVALID_PARAMETER;
+ break;
+
+ case EFI_UNSUPPORTED :
+ ShellStatus = SHELL_UNSUPPORTED;
+ break;
+
+ case EFI_DEVICE_ERROR :
+ ShellStatus = SHELL_DEVICE_ERROR;
+ break;
+
+ case EFI_WRITE_PROTECTED :
+ case EFI_SECURITY_VIOLATION :
+ ShellStatus = SHELL_ACCESS_DENIED;
+ break;
+
+ case EFI_OUT_OF_RESOURCES :
+ ShellStatus = SHELL_OUT_OF_RESOURCES;
+ break;
+
+ case EFI_NOT_FOUND :
+ ShellStatus = SHELL_NOT_FOUND;
+ break;
+
+ default :
+ ShellStatus = SHELL_ABORTED;
+ }
+
+ return ShellStatus;
+}
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.h b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.h
new file mode 100644
index 0000000000..22517b6d28
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatform.h
@@ -0,0 +1,102 @@
+/** @file
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+ https://spdx.org/licenses
+
+ Copyright (C) 2023 Marvell
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+**/
+
+#ifndef __FDT_PLATFORM_DXE_H__
+#define __FDT_PLATFORM_DXE_H__
+
+#include <Uefi.h>
+
+#include <Library/DevicePathLib.h>
+#include <Protocol/Shell.h>
+#include <Protocol/ShellDynamicCommand.h>
+
+#include <Library/DebugLib.h>
+#include <Library/HiiLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/ShellLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+#include <Guid/Fdt.h>
+
+#include <libfdt.h>
+
+extern EFI_HANDLE mFdtPlatformDxeHiiHandle;
+
+/**
+ Transcode one of the EFI return code used by the model into an EFI Shell return code.
+
+ @param[in] Status EFI return code.
+
+ @return Transcoded EFI Shell return code.
+
+**/
+SHELL_STATUS
+EfiCodeToShellCode (
+ IN EFI_STATUS Status
+ );
+
+/**
+ Run the FDT installation process.
+
+ Loop in priority order over the device paths from which the FDT has
+ been asked to be retrieved for. For each device path, try to install
+ the FDT. Stop as soon as an installation succeeds.
+
+ @param[in] SuccessfullDevicePath If not NULL, address where to store the
+ pointer to the text device path from
+ which the FDT was successfully retrieved.
+ Not used if the FDT installation failed.
+ The returned address is the address of
+ an allocated buffer that has to be
+ freed by the caller.
+
+ @retval EFI_SUCCESS The FDT was installed.
+ @retval EFI_NOT_FOUND Failed to locate a protocol or a file.
+ @retval EFI_INVALID_PARAMETER Invalid device path.
+ @retval EFI_UNSUPPORTED Device path not supported.
+ @retval EFI_OUT_OF_RESOURCES An allocation failed.
+
+**/
+EFI_STATUS
+RunFdtInstallation (
+ OUT CHAR16 **SuccessfullDevicePath
+ );
+
+SHELL_STATUS
+EFIAPI
+ShellDynCmdDumpFdtHandler (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN EFI_SYSTEM_TABLE *SystemTable,
+ IN EFI_SHELL_PARAMETERS_PROTOCOL *ShellParameters,
+ IN EFI_SHELL_PROTOCOL *Shell
+ );
+
+/**
+ This is the shell command "dumpfdt" help handler function. This
+ function returns the formatted help for the "dumpfdt" command.
+ The format matchs that in Appendix B of the revision 2.1 of the
+ UEFI Shell Specification.
+
+ @param[in] This The instance of the EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] Language The pointer to the language string to use.
+
+ @return CHAR16* Pool allocated help string, must be freed by caller.
+**/
+CHAR16*
+EFIAPI
+ShellDynCmdDumpFdtGetHelp (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN CONST CHAR8 *Language
+ );
+
+#endif /* __FDT_PLATFORM_DXE_H__ */
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.inf b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.inf
new file mode 100644
index 0000000000..1c3496d13f
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.inf
@@ -0,0 +1,60 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2023 Marvell
+#
+# Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010006
+ BASE_NAME = FdtPlatformDxe
+ MODULE_UNI_FILE = FdtPlatformDxe.uni
+ FILE_GUID = 6e9a4c69-57c6-4fcd-b083-4f2c3bdb6051
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 0.1
+ ENTRY_POINT = FdtPlatformEntryPoint
+
+[Sources.common]
+ FdtPlatform.c
+ FdtPlatformDxe.uni
+ ShellDumpFdt.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ Platform/ARM/ARM.dec
+ Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
+ ShellPkg/ShellPkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ BaseMemoryLib
+ DebugLib
+ FdtLib
+ UefiBootServicesTableLib
+ UefiRuntimeServicesTableLib
+ HiiLib
+ ShellLib
+ HobLib
+
+[Protocols]
+ gEfiShellDynamicCommandProtocolGuid
+
+[Guids]
+ gFdtHobGuid
+ gFdtTableGuid
+
+[FeaturePcd]
+ gMarvellSiliconTokenSpaceGuid.PcdPublishFdt
+ gMarvellSiliconTokenSpaceGuid.PcdFixupFdt
+
+[FixedPcd]
+ gMarvellSiliconTokenSpaceGuid.PcdFdtConfigRootNode
+
+[Depex]
+ TRUE
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.uni b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.uni
new file mode 100644
index 0000000000..828fb9a609
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.uni
@@ -0,0 +1,106 @@
+// *++
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+// https://spdx.org/licenses
+//
+// Copyright (C) 2023 Marvell
+//
+// Copyright (c) 2014, ARM Ltd. All rights reserved.<BR>
+//
+//
+// Module Name:
+//
+// FdtPlatformDxe
+//
+// Abstract:
+//
+// String definitions for the EFI Shell 'setfdt' command
+//
+// Revision History:
+//
+// --*/
+
+/=#
+
+#langdef en-US "English"
+
+#string STR_SETFDT_INSTALLING #language en-US "Installing the FDT ...\r\n"
+#string STR_SETFDT_INSTALL_SUCCEEDED #language en-US "Installation of\r\n'%s'\r\ncompleted.\r\n"
+
+#string STR_SETFDT_UPDATING #language en-US "Updating the FDT device path ...\r\n"
+#string STR_SETFDT_UPDATE_SUCCEEDED #language en-US "Update of the FDT device path '%s' completed.\r\n"
+#string STR_SETFDT_UPDATE_DELETED #language en-US "The UEFI variable "Fdt" was deleted.\r\n"
+
+#string STR_SETFDT_INVALID_DEVICE_PATH #language en-US "Invalid device path.\r\n"
+#string STR_SETFDT_INVALID_PATH #language en-US "The EFI Shell or device file path '%s' is invalid.\r\n"
+#string STR_SETFDT_ERROR #language en-US "Error - %r.\r\n"
+#string STR_SETFDT_DEVICE_PATH_LIST #language en-US "FDT device paths :\r\n"
+#string STR_SETFDT_DEVICE_PATH #language en-US "'%s'\r\n"
+
+#string STR_GET_HELP_SETFDT #language en-US ""
+".TH setfdt 0 "Define and/or install a new Flat Device Tree (FDT) for the platform."\r\n"
+".SH NAME\r\n"
+"Define and/or re-install a Flat Device Tree (FDT)\r\n"
+".SH SYNOPSIS\r\n"
+"setfdt [-i] [fdt_path]\r\n"
+".SH OPTIONS\r\n"
+"-i run the FDT installation process\r\n"
+"file_path EFI Shell file path or device path to a FDT\r\n"
+"\r\n"
+".SH DESCRIPTION\r\n"
+"NOTES:\r\n"
+"1. If a valid EFI Shell file path is passed to the command, then the\r\n"
+" command translates the EFI Shell file path into a device path in the\r\n"
+" text form and saves it in the non volatile UEFI variable "Fdt". If\r\n"
+" the path to the FDT is a device path in the text form, it is saved as\r\n"
+" it is in the non volatile UEFI variable "Fdt". The next time the FDT\r\n"
+" installation process is run, it will first try to install the FDT from\r\n"
+" the device path specified by the UEFI variable "Fdt".\r\n"
+" \r\n
+"2. If the option -i is passed to the command, then the FDT installation\r\n"
+" process is run. If a path to the FDT is passed to the command as well,\r\n"
+" the update of the "Fdt" UEFI variable is done first before to launch\r\n"
+" the FDT installation process.\r\n"
+" \r\n
+".SH RETURNVALUES\r\n"
+"SHELL_SUCCESS Operation(s) completed.\r\n"
+"SHELL_ABORTED Operation aborted.\r\n"
+"SHELL_INVALID_PARAMETER Invalid argument(s).\r\n"
+"SHELL_NOT_FOUND Failed to locate a protocol or a file.\r\n"
+"SHELL_UNSUPPORTED Device path not supported.\r\n"
+"SHELL_OUT_OF_RESOURCES A memory allocation failed.\r\n"
+"SHELL_DEVICE ERROR Hardware failure.\r\n"
+"SHELL_ACCESS_DENIED Access to the Fdt UEFI variable for modification denied.\r\n"
+".SH EXAMPLES\r\n"
+"EXAMPLES:\r\n"
+"1. Relaunch the FDT installation process :\r\n"
+" Shell> setfdt -i\r\n"
+" \r\n"
+"2. Set the EFI Shell file path 'fs0:\>fdt.dtb' to be the default path\r\n"
+" to the FDT :\r\n"
+" Shell> setfdt fs0:fdt.dtb\r\n"
+" \r\n"
+"3. Set a TFTP device path to be the default path to the FDT :\r\n"
+" Shell> setfdt MAC(0002f700570b,0x1)/IPv4(192.168.1.1)/fdt.dtb\r\n"
+" where . 00:02:f7:00:57:0b is the MAC address of the network\r\n"
+" interface card to be used. The 'ifconfig -l' EFI Shell\r\n"
+" command allows to get the MAC address of the network\r\n"
+" interface cards.\r\n"
+" . 192.168.1.1 is the address of the TFTP server.\r\n"
+" . fdt.dtb is the file path to the FDT file on the server.\r\n"
+"4. Display the FDT device paths from the highest to the lowest\r\n"
+" priority :\r\n"
+" Shell> setfdt\r\n"
+"5. Delete the "Fdt" UEFI variable :\r\n"
+" Shell> setfdt ""\r\n"
+"\r\n"
+
+#string STR_GET_HELP_DUMPFDT #language en-US ""
+".TH dumpfdt 0 "Dump installed Flat Device Tree (FDT) of the platform."\r\n"
+".SH NAME\r\n"
+"Dump current Flat Device Tree (FDT)\r\n"
+".SH SYNOPSIS\r\n"
+"dumpfdt\r\n"
+"\r\n"
+".SH DESCRIPTION\r\n"
+"\r\n"
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/README.txt b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/README.txt
new file mode 100644
index 0000000000..fe0ee0ba1b
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/README.txt
@@ -0,0 +1,69 @@
+/** @file
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+ https://spdx.org/licenses
+
+ Copyright (C) 2023 Marvell
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+**/
+
+The purpose of the FdtPlatformDxe UEFI driver is to install the Flat Device
+Tree (FDT) of the platform the UEFI frimware is running on into the UEFI
+Configuration Table. The FDT is identified within the UEFI Configuration
+Table by the "gFdtTableGuid" GUID defined in "EmbeddedPkg.dec".
+
+Once installed, an UEFI application or OS boot loader can get from the UEFI
+Configuration Table the FDT of the platform from the "gFdtTableGuid" GUID.
+
+The installation is done after each boot at the end of the DXE phase,
+just before the BDS phase. It is done at the end of the DXE phase to be sure
+that all drivers have been dispatched. That way, all UEFI protocols that may
+be needed to retrieve the FDT can be made available. It is done before the BDS
+phase to be able to provide the FDT during that phase.
+
+The present driver tries to retrieve the FDT from the device paths defined in the
+"gEmbeddedTokenSpaceGuid.PcdFdtDevicePaths" PCD. The "PcdFdtDevicePaths" PCD
+contains a list a device paths. The device paths are in the text form and
+separated by semi-colons. The present driver tries the device paths in the order
+it finds them in the "PcdFdtDevicePaths" PCD as long as he did not install
+succesfully a FDT.
+
+The "PcdFdtDevicePaths" PCD is a dynamic PCD that can be modified during the
+DXE phase. This allows for exemple to select the right FDT when a binary is
+intended to run on several platforms and/or variants of a platform.
+
+If the driver manages to download a FDT from one of the device paths mentioned
+above then it installs it in the UEFI Configuration table and the run over the
+device paths is stopped.
+
+For development purposes only, if the feature PCD "gEmbeddedTokenSpaceGuid.
+PcdOverridePlatformFdt" is equal to TRUE, then before to try to install the
+FDT from the device paths listed in the "PcdFdtDevicePaths" PCD, the present
+driver tries to install it using the device path defined by the UEFI variable
+"Fdt". If the variable does not exist or the installation using the device path
+defined by the UEFI variable fails then the installation proceeds as described
+above.
+
+Furthermore and again for development purposes only, if the feature PCD
+"PcdOverridePlatformFdt" is equal to TRUE, the current driver provides the EFI
+Shell command "setfdt" to define the location of the FDT by the mean of an EFI
+Shell file path (like "fs2:\boot\fdt.dtb") or a device path.
+
+If the path passed in to the command is a valid EFI Shell file path, the
+command translates it into the corresponding device path and stores that
+device path in the "Fdt" UEFI variable asking for the variable to be non
+volatile.
+
+If the path passed in to the command is not recognised as a valid EFI
+Shell device path, the command handles it as device path and stored
+in the "Fdt" UEFI variable as it is.
+
+Finally, the "-i" option of the "setfdt" command allows to trigger the FDT
+installation process. The installation process is completed when the command
+returns. The command can be invoked with the "-i" option only and in that
+case the "Fdt" UEFI variable is not updated and the command just runs the
+FDT installation process. If the command is invoked with the "-i" option and
+an EFI Shell file path then first the "Fdt" UEFI variable is updated accordingly
+and then the FDT installation process is run.
diff --git a/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/ShellDumpFdt.c b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/ShellDumpFdt.c
new file mode 100644
index 0000000000..cf570b1576
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/ShellDumpFdt.c
@@ -0,0 +1,283 @@
+/** @file
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+ https://spdx.org/licenses
+
+ Copyright (C) 2023 Marvell
+
+ Copyright (c) 2015, ARM Ltd. All rights reserved.<BR>
+
+**/
+
+#include "FdtPlatform.h"
+
+extern VOID *mFdtBlobBase;
+
+#define ALIGN(x, a) (((x) + ((a) - 1)) & ~((a) - 1))
+#define PALIGN(p, a) ((void *)(ALIGN ((unsigned long)(p), (a))))
+#define GET_CELL(p) (p += 4, *((const uint32_t *)(p-4)))
+
+STATIC
+UINTN
+IsPrintableString (
+ IN CONST VOID* data,
+ IN UINTN len
+ )
+{
+ CONST CHAR8 *s = data;
+ CONST CHAR8 *ss;
+
+ // Zero length is not
+ if (len == 0) {
+ return 0;
+ }
+
+ // Must terminate with zero
+ if (s[len - 1] != '\0') {
+ return 0;
+ }
+
+ ss = s;
+ while (*s/* && isprint (*s)*/) {
+ s++;
+ }
+
+ // Not zero, or not done yet
+ if (*s != '\0' || (s + 1 - ss) < len) {
+ return 0;
+ }
+
+ return 1;
+}
+
+STATIC
+VOID
+PrintData (
+ IN CONST CHAR8* data,
+ IN UINTN len
+ )
+{
+ UINTN i;
+ CONST CHAR8 *p = data;
+
+ // No data, don't print
+ if (len == 0)
+ return;
+
+ if (IsPrintableString (data, len)) {
+ Print (L" = \"%a\"", (const char *)data);
+ } else if ((len % 4) == 0) {
+ Print (L" = <");
+ for (i = 0; i < len; i += 4) {
+ Print (L"0x%08x%a", fdt32_to_cpu (GET_CELL (p)), i < (len - 4) ? " " : "");
+ }
+ Print (L">");
+ } else {
+ Print (L" = [");
+ for (i = 0; i < len; i++)
+ Print (L"%02x%a", *p++, i < len - 1 ? " " : "");
+ Print (L"]");
+ }
+}
+
+STATIC
+VOID
+DumpFdt (
+ IN VOID* FdtBlob
+ )
+{
+ struct fdt_header *bph;
+ UINT32 off_dt;
+ UINT32 off_str;
+ CONST CHAR8* p_struct;
+ CONST CHAR8* p_strings;
+ CONST CHAR8* p;
+ CONST CHAR8* s;
+ CONST CHAR8* t;
+ UINT32 tag;
+ UINTN sz;
+ UINTN depth;
+ UINTN shift;
+ UINT32 version;
+
+ {
+ // Can 'memreserve' be printed by below code?
+ INTN num = fdt_num_mem_rsv (FdtBlob);
+ INTN i, err;
+ UINT64 addr = 0, size = 0;
+
+ for (i = 0; i < num; i++) {
+ err = fdt_get_mem_rsv (FdtBlob, i, &addr, &size);
+ if (err) {
+ DEBUG ((DEBUG_ERROR, "Error (%d) : Cannot get memreserve section (%d)\n", err, i));
+ }
+ else {
+ Print (L"/memreserve/ \t0x%lx \t0x%lx;\n", addr, size);
+ }
+ }
+ }
+
+ depth = 0;
+ shift = 4;
+
+ bph = FdtBlob;
+ off_dt = fdt32_to_cpu (bph->off_dt_struct);
+ off_str = fdt32_to_cpu (bph->off_dt_strings);
+ p_struct = (CONST CHAR8*)FdtBlob + off_dt;
+ p_strings = (CONST CHAR8*)FdtBlob + off_str;
+ version = fdt32_to_cpu (bph->version);
+
+ p = p_struct;
+ while ((tag = fdt32_to_cpu (GET_CELL (p))) != FDT_END) {
+ if (tag == FDT_BEGIN_NODE) {
+ s = p;
+ p = PALIGN (p + AsciiStrLen (s) + 1, 4);
+
+ if (*s == '\0')
+ s = "/";
+
+ Print (L"%*s%a {\n", depth * shift, L" ", s);
+
+ depth++;
+ continue;
+ }
+
+ if (tag == FDT_END_NODE) {
+ depth--;
+
+ Print (L"%*s};\n", depth * shift, L" ");
+ continue;
+ }
+
+ if (tag == FDT_NOP) {
+ /* Print (L"%*s// [NOP]\n", depth * shift, L" "); */
+ continue;
+ }
+
+ if (tag != FDT_PROP) {
+ Print (L"%*s ** Unknown tag 0x%08x\n", depth * shift, L" ", tag);
+ break;
+ }
+ sz = fdt32_to_cpu (GET_CELL (p));
+ s = p_strings + fdt32_to_cpu (GET_CELL (p));
+ if (version < 16 && sz >= 8)
+ p = PALIGN (p, 8);
+ t = p;
+
+ p = PALIGN (p + sz, 4);
+
+ Print (L"%*s%a", depth * shift, L" ", s);
+ PrintData (t, sz);
+ Print (L";\n");
+ }
+}
+
+/**
+ This is the shell command "dumpfdt" handler function. This function handles
+ the command when it is invoked in the shell.
+
+ @param[in] This The instance of the
+ EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] SystemTable The pointer to the UEFI system table.
+ @param[in] ShellParameters The parameters associated with the command.
+ @param[in] Shell The instance of the shell protocol used in the
+ context of processing this command.
+
+ @return SHELL_SUCCESS The operation was successful.
+ @return SHELL_ABORTED Operation aborted due to internal error.
+ @return SHELL_NOT_FOUND Failed to locate the Device Tree into the EFI Configuration Table
+ @return SHELL_OUT_OF_RESOURCES A memory allocation failed.
+
+**/
+SHELL_STATUS
+EFIAPI
+ShellDynCmdDumpFdtHandler (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN EFI_SYSTEM_TABLE *SystemTable,
+ IN EFI_SHELL_PARAMETERS_PROTOCOL *ShellParameters,
+ IN EFI_SHELL_PROTOCOL *Shell
+ )
+{
+ SHELL_STATUS ShellStatus;
+ EFI_STATUS Status;
+ VOID *FdtBlob;
+
+ ShellStatus = SHELL_SUCCESS;
+
+ //
+ // Install the Shell and Shell Parameters Protocols on the driver
+ // image. This is necessary for the initialisation of the Shell
+ // Library to succeed in the next step.
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &gImageHandle,
+ &gEfiShellProtocolGuid, Shell,
+ &gEfiShellParametersProtocolGuid, ShellParameters,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ return SHELL_ABORTED;
+ }
+
+ //
+ // Initialise the Shell Library as we are going to use it.
+ // Assert that the return code is EFI_SUCCESS as it should.
+ // To anticipate any change is the codes returned by
+ // ShellInitialize(), leave in case of error.
+ //
+ Status = ShellInitialize ();
+ if (EFI_ERROR (Status)) {
+ ASSERT_EFI_ERROR (Status);
+ return SHELL_ABORTED;
+ }
+
+ if (PcdGetBool (PcdPublishFdt)) {
+ Status = EfiGetSystemConfigurationTable (&gFdtTableGuid, &FdtBlob);
+
+ if (EFI_ERROR (Status)) {
+ Print (L"ERROR: Did not find the Fdt Blob.\n");
+ return EfiCodeToShellCode (Status);
+ }
+ } else {
+ FdtBlob = mFdtBlobBase;
+ }
+
+ DumpFdt (FdtBlob);
+
+ gBS->UninstallMultipleProtocolInterfaces (
+ gImageHandle,
+ &gEfiShellProtocolGuid, Shell,
+ &gEfiShellParametersProtocolGuid, ShellParameters,
+ NULL
+ );
+
+ return ShellStatus;
+}
+
+/**
+ This is the shell command "dumpfdt" help handler function. This
+ function returns the formatted help for the "dumpfdt" command.
+ The format matchs that in Appendix B of the revision 2.1 of the
+ UEFI Shell Specification.
+
+ @param[in] This The instance of the EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL.
+ @param[in] Language The pointer to the language string to use.
+
+ @return CHAR16* Pool allocated help string, must be freed by caller.
+**/
+CHAR16*
+EFIAPI
+ShellDynCmdDumpFdtGetHelp (
+ IN EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL *This,
+ IN CONST CHAR8 *Language
+ )
+{
+ //
+ // This allocates memory. The caller has to free the allocated memory.
+ //
+ return HiiGetString (
+ mFdtPlatformDxeHiiHandle,
+ STRING_TOKEN (STR_GET_HELP_DUMPFDT),
+ Language
+ );
+}
diff --git a/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.c b/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.c
new file mode 100644
index 0000000000..caa27a2348
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.c
@@ -0,0 +1,281 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2022 Marvell
+*
+* Source file for NULL RTC Driver
+*
+**/
+
+#include <Uefi.h> // Base defines
+#include <Library/DebugLib.h> // DEBUG
+#include <Library/MemoryAllocationLib.h> // AllocateRuntimeZeroPool
+#include <Library/BaseMemoryLib.h> // ZeroMem
+#include <Library/UefiBootServicesTableLib.h> // gBS
+#include <Library/UefiRuntimeLib.h> // EfiConvertPointer
+#include <Library/UefiRuntimeServicesTableLib.h> // gRT
+
+#include "RtcNullDxe.h"
+
+// all variables used across the driver
+RTC_NULL_PRIVATE_DATA *mRtcPrivateData;
+STATIC EFI_EVENT mRtcVirtualAddressChangeEvent;
+
+STATIC CONST INTN DayOfMonth[12] =
+ { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+STATIC
+BOOLEAN
+IsLeapYear(IN EFI_TIME *Time)
+{
+ if (Time->Year % 4 == 0) {
+ if (Time->Year % 100 == 0) {
+ if (Time->Year % 400 == 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+ } else {
+ return TRUE;
+ }
+ } else {
+ return FALSE;
+ }
+}
+
+BOOLEAN DayValid(IN EFI_TIME *Time)
+{
+ if (Time->Day < 1 ||
+ Time->Day > DayOfMonth[Time->Month - 1] ||
+ (Time->Month == 2 && (!IsLeapYear (Time) && Time->Day > 28))) {
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
+EFI_STATUS
+GetDateTime(
+ IN RTC_NULL_PRIVATE_DATA *PrivateData,
+ OUT EFI_TIME *Time)
+{
+
+ if (PrivateData == NULL || Time == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem(Time, sizeof(EFI_TIME));
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+SetDateTime(IN RTC_NULL_PRIVATE_DATA *PrivateData,
+ IN EFI_TIME *Time)
+{
+ if (PrivateData == NULL || Time == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ( (Time->Month < 1) || (Time->Month > 12) ||
+ (Time->Second > 59) || (Time->Minute > 59) ||
+ (Time->Hour > 23) || (!DayValid(Time)) ||
+ (Time->Year < 1998) || (Time->Year > 2099) ||
+ (Time->Nanosecond > 999999999) ||
+ (Time->TimeZone < -1440) || ((Time->TimeZone > 1440) &&
+ (Time->TimeZone != 2047))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Returns the current time and date information, and the time-keeping capabilities
+ of the hardware platform.
+
+ @param Time A pointer to storage to receive a snapshot of the current time.
+ @param Capabilities An optional pointer to a buffer to receive the real time clock
+ device's capabilities.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER Time is NULL.
+ @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware error.
+
+**/
+EFI_STATUS
+ EFIAPI
+GetTime(OUT EFI_TIME * Time, OUT EFI_TIME_CAPABILITIES * Capabilities)
+{
+ if (Time == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (mRtcPrivateData->Initialized == FALSE) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return GetDateTime (mRtcPrivateData, Time);
+}
+
+
+
+/**
+ Sets the current local time and date information.
+
+ @param Time A pointer to the current time.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+ @retval EFI_DEVICE_ERROR The time could not be set due due to hardware error.
+
+**/
+EFI_STATUS EFIAPI SetTime(IN EFI_TIME * Time)
+{
+ if (Time == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (mRtcPrivateData->Initialized == FALSE) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return SetDateTime (mRtcPrivateData, Time);
+}
+
+
+/**
+ Returns the current wakeup alarm clock setting.
+
+ @param Enabled Indicates if the alarm is currently enabled or disabled.
+ @param Pending Indicates if the alarm signal is pending and requires acknowledgement.
+ @param Time The current alarm setting.
+
+ @retval EFI_SUCCESS The alarm settings were returned.
+ @retval EFI_INVALID_PARAMETER Any parameter is NULL.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error.
+
+**/
+EFI_STATUS
+ EFIAPI
+GetWakeupTime(OUT BOOLEAN * Enabled,
+ OUT BOOLEAN * Pending, OUT EFI_TIME * Time)
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ Sets the system wakeup alarm clock time.
+
+ @param Enabled Enable or disable the wakeup alarm.
+ @param Time If Enable is TRUE, the time to set the wakeup alarm for.
+
+ @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If
+ Enable is FALSE, then the wakeup alarm was disabled.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error.
+ @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform.
+
+**/
+EFI_STATUS EFIAPI SetWakeupTime(IN BOOLEAN Enabled, OUT EFI_TIME * Time)
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+// Convert the mSmbus as well since the SmbusLib leaves this to the runtine DXEs
+
+EFIAPI VOID
+RtcVirtualNotifyEvent(IN EFI_EVENT Event, IN VOID * Context)
+{
+ EfiConvertPointer (0x0, (VOID **) &mRtcPrivateData);
+}
+
+/**
+ The Entry Point of module. It follows the standard UEFI driver model.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+ EFIAPI
+RtcNullDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE * SystemTable)
+{
+ EFI_TIME Time;
+ RTC_NULL_PRIVATE_DATA *Private = NULL;
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ DEBUG ((DEBUG_INFO, "RtcNullDxeInitialize\n"));
+
+ /* Allocate the private data */
+ Private = AllocateRuntimeZeroPool (sizeof (RTC_NULL_PRIVATE_DATA));
+
+ if (Private == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((DEBUG_ERROR, "RtcDxeInitialize: %r\n", Status));
+ goto Exit;
+ }
+
+ mRtcPrivateData = Private;
+
+ Private->Initialized = FALSE;
+ Private->Bus = 0xFF;
+ Private->SlaveAddr = 0xFF;
+
+ /* Check clock and init it to UNIX start time */
+ Status = GetDateTime (mRtcPrivateData, &Time);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "RtcNullDxeInitialize: %r\n", Status));
+ goto Exit;
+ }
+
+ if (Time.Year == 1900) {
+ Time.Day = 1;
+ Time.Month = 1;
+ Time.Year = 1998;
+ Time.Second = 0;
+ Time.Minute = 0;
+ Time.Hour = 0;
+ Time.Daylight = 0;
+ Time.TimeZone = 0;
+
+ Status = SetDateTime (mRtcPrivateData, &Time);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "RtcDxeInitialize: %r\n", Status));
+ goto Exit;
+ }
+ }
+
+Exit:
+ gRT->GetTime = GetTime;
+ gRT->SetTime = SetTime;
+ gRT->GetWakeupTime = GetWakeupTime;
+ gRT->SetWakeupTime = SetWakeupTime;
+
+ Status = gBS->InstallMultipleProtocolInterfaces (&Private->RtcHandle,
+ &gEfiRealTimeClockArchProtocolGuid,
+ NULL,
+ NULL);
+
+ Status = gBS->CreateEventEx (EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ RtcVirtualNotifyEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mRtcVirtualAddressChangeEvent);
+ ASSERT_EFI_ERROR(Status);
+
+ return Status;
+}
+
diff --git a/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.h b/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.h
new file mode 100644
index 0000000000..c8fe54ace3
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.h
@@ -0,0 +1,41 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2022 Marvell
+*
+* Header file for NULL RTC Driver
+*
+**/
+
+#ifndef _RTC_NULL_DXE_H_
+#define _RTC_NULL_DXE_H_
+
+#include <Uefi.h>
+
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+//#include <Library/IoLib.h>
+//#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h> // gBS
+#include <Library/BaseMemoryLib.h> // ZeroMem
+//#include <Library/UefiLib.h>
+
+
+//
+// Private data for driver.
+//
+#define RTC_NULL_DXE_PRIVATE_DATA_SIGNATURE SIGNATURE_32( 'R', 'T', 'C', '_' )
+
+typedef struct {
+ UINT32 Signature;
+ UINT8 Bus;
+ UINT8 SlaveAddr;
+ EFI_HANDLE RtcHandle;
+ BOOLEAN Initialized;
+} RTC_NULL_PRIVATE_DATA;
+
+
+#endif //_RTC_NULL_DXE_H_
diff --git a/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.inf b/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.inf
new file mode 100644
index 0000000000..d262e971fc
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Null/RtcNull/RtcNullDxe.inf
@@ -0,0 +1,46 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2022 Marvell
+# Module description file of RTC NULL driver.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = RtcNullDxe
+ FILE_GUID = 9c0a0971-b0f6-442e-ac01-0a3eb52c457d
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = RtcNullDxeInitialize
+
+
+[Sources]
+ RtcNullDxe.c
+ RtcNullDxe.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ MemoryAllocationLib
+ UefiDriverEntryPoint
+ BaseMemoryLib
+ UefiBootServicesTableLib
+ UefiRuntimeLib
+ UefiRuntimeServicesTableLib
+
+[Guids]
+ gEfiEventVirtualAddressChangeGuid
+
+[Protocols]
+ gEfiRealTimeClockArchProtocolGuid ## PRODUCES
+
+[Depex]
+ TRUE
+
diff --git a/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c
new file mode 100644
index 0000000000..12be08ff24
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c
@@ -0,0 +1,408 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2022 Marvell
+*
+* Source file for Marvell Watchdog driver
+*
+**/
+
+
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Protocol/FdtClient.h>
+#include <Protocol/WatchdogTimer.h>
+
+#define GTI_CWD_WDOG(Core) (FixedPcdGet64(PcdGtiWatchdogBase64) + 0x40000 + Core * 0x8)
+#define GTI_CWD_POKE(Core) (FixedPcdGet64(PcdGtiWatchdogBase64) + 0x50000 + Core * 0x8)
+
+typedef union _GTI_CWD_WDOG_UNION {
+ UINT64 U64;
+ struct {
+ UINTN Mode : 2;
+ UINTN State : 2;
+ UINTN Len : 16;
+ UINTN Cnt : 24;
+ UINTN DStop : 1;
+ UINTN GStop : 1;
+ UINTN Rsvd : 18;
+ } PACKED S;
+} GTI_CWD_WDOG_UNION;
+
+#define CWD_WDOG_MODE_RST (BIT1 | BIT0)
+
+#define RST_BOOT_PNR_MUL(Val) ((Val >> 33) & 0x1F)
+
+EFI_EVENT mGtiExitBootServicesEvent = (EFI_EVENT)NULL;
+UINT32 mSclk = 0;
+BOOLEAN mHardwarePlatform = TRUE;
+
+/**
+ Stop the GTI watchdog timer from counting down by disabling interrupts.
+**/
+STATIC
+VOID
+GtiWdtStop (
+ VOID
+ )
+{
+ GTI_CWD_WDOG_UNION Wdog;
+
+ MmioWrite64(GTI_CWD_POKE(0), 0);
+
+ Wdog.U64 = MmioRead64(GTI_CWD_WDOG(0));
+
+ // Disable WDT
+ if (Wdog.S.Mode != 0) {
+ Wdog.S.Len = 1;
+ Wdog.S.Mode = 0;
+ MmioWrite64 (GTI_CWD_WDOG(0), Wdog.U64);
+ }
+}
+
+/**
+ Starts the GTI WDT countdown by enabling interrupts.
+ The count down will start from the value stored in the Load register,
+ not from the value where it was previously stopped.
+**/
+STATIC
+VOID
+GtiWdtStart (
+ VOID
+ )
+{
+ GTI_CWD_WDOG_UNION Wdog;
+
+ // Reset the WDT
+ MmioWrite64 (GTI_CWD_POKE(0), 0);
+
+ Wdog.U64 = MmioRead64 (GTI_CWD_WDOG(0));
+
+ // Enable countdown
+ if (Wdog.S.Mode == 0) {
+ Wdog.S.Mode = CWD_WDOG_MODE_RST;
+ MmioWrite64 (GTI_CWD_WDOG(0), Wdog.U64);
+ }
+}
+
+/**
+ On exiting boot services we must make sure the SP805 Watchdog Timer
+ is stopped.
+**/
+VOID
+EFIAPI
+GtiExitBootServices (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ MmioWrite64 (GTI_CWD_POKE(0), 0);
+ GtiWdtStop ();
+}
+
+/**
+ This function registers the handler NotifyFunction so it is called every time
+ the watchdog timer expires. It also passes the amount of time since the last
+ handler call to the NotifyFunction.
+ If NotifyFunction is not NULL and a handler is not already registered,
+ then the new handler is registered and EFI_SUCCESS is returned.
+ If NotifyFunction is NULL, and a handler is already registered,
+ then that handler is unregistered.
+ If an attempt is made to register a handler when a handler is already registered,
+ then EFI_ALREADY_STARTED is returned.
+ If an attempt is made to unregister a handler when a handler is not registered,
+ then EFI_INVALID_PARAMETER is returned.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param NotifyFunction The function to call when a timer interrupt fires. This
+ function executes at TPL_HIGH_LEVEL. The DXE Core will
+ register a handler for the timer interrupt, so it can know
+ how much time has passed. This information is used to
+ signal timer based events. NULL will unregister the handler.
+
+ @retval EFI_SUCCESS The watchdog timer handler was registered.
+ @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
+ registered.
+ @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
+ previously registered.
+ @retval EFI_UNSUPPORTED HW does not support this functionality.
+
+**/
+EFI_STATUS
+EFIAPI
+GtiWdtRegisterHandler (
+ IN CONST EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_WATCHDOG_TIMER_NOTIFY NotifyFunction
+ )
+{
+ // UNSUPPORTED - The hardware watchdog will reset the board
+ return EFI_UNSUPPORTED;
+}
+
+/**
+
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is
+ returned. If the timer is programmable, then the timer period
+ will be rounded up to the nearest timer period that is supported
+ by the timer hardware. If TimerPeriod is set to 0, then the
+ timer interrupts will be disabled.
+
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+GtiWdtSetTimerPeriod (
+ IN CONST EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod // In 100ns units
+ )
+{
+ UINT32 Clock;
+ UINT64 CountDown;
+ GTI_CWD_WDOG_UNION Wdog;
+
+ if (TimerPeriod == 0) {
+
+ // This is a watchdog stop request
+ GtiWdtStop();
+
+ return EFI_SUCCESS;
+ } else {
+ //
+ // The system is reset only after the WDT expires for the 3rd time
+ //
+
+ Clock = mSclk / 1000000; //MHz
+ CountDown = DivU64x32 (MultU64x32 (TimerPeriod, Clock), 30);
+
+ // WDT counts in 1024 cycle steps
+ // Only upper 16 bits can be used
+
+ Wdog.U64 = 0;
+ Wdog.S.Len = (CountDown + (0xFF << 10)) >> 18;
+ MmioWrite64 (GTI_CWD_WDOG(0), Wdog.U64);
+
+ // Start the watchdog
+ if (mHardwarePlatform == TRUE) {
+ GtiWdtStart();
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If
+ 0 is returned, then the timer is currently disabled.
+
+
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+GtiWdtGetTimerPeriod (
+ IN CONST EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ )
+{
+ UINT32 Clock;
+ UINT64 CountDown;
+ UINT64 ReturnValue;
+ GTI_CWD_WDOG_UNION Wdog;
+
+ if (TimerPeriod == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Wdog.U64 = MmioRead64 (GTI_CWD_WDOG(0));
+
+ // Check if the watchdog is stopped
+ if (Wdog.S.Mode == 0) {
+ // It is stopped, so return zero.
+ ReturnValue = 0;
+ } else {
+ // Convert the Watchdog ticks into TimerPeriod
+ Clock = mSclk / 1000000; //MHz
+ CountDown = Wdog.S.Len << 18;
+
+ ReturnValue = MultU64x32(DivU64x32(3 * CountDown, Clock), 10); // usecs * 10
+ }
+
+ *TimerPeriod = ReturnValue;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Interface structure for the Watchdog Architectural Protocol.
+
+ @par Protocol Description:
+ This protocol provides a service to set the amount of time to wait
+ before firing the watchdog timer, and it also provides a service to
+ register a handler that is invoked when the watchdog timer fires.
+
+ @par When the watchdog timer fires, control will be passed to a handler
+ if one has been registered. If no handler has been registered,
+ or the registered handler returns, then the system will be
+ reset by calling the Runtime Service ResetSystem().
+
+ @param RegisterHandler
+ Registers a handler that will be called each time the
+ watchdogtimer interrupt fires. TimerPeriod defines the minimum
+ time between timer interrupts, so TimerPeriod will also
+ be the minimum time between calls to the registered
+ handler.
+ NOTE: If the watchdog resets the system in hardware, then
+ this function will not have any chance of executing.
+
+ @param SetTimerPeriod
+ Sets the period of the timer interrupt in 100 nS units.
+ This function is optional, and may return EFI_UNSUPPORTED.
+ If this function is supported, then the timer period will
+ be rounded up to the nearest supported timer period.
+
+ @param GetTimerPeriod
+ Retrieves the period of the timer interrupt in 100 nS units.
+
+**/
+EFI_WATCHDOG_TIMER_ARCH_PROTOCOL gWatchdogTimer = {
+ (EFI_WATCHDOG_TIMER_REGISTER_HANDLER) GtiWdtRegisterHandler,
+ (EFI_WATCHDOG_TIMER_SET_TIMER_PERIOD) GtiWdtSetTimerPeriod,
+ (EFI_WATCHDOG_TIMER_GET_TIMER_PERIOD) GtiWdtGetTimerPeriod
+};
+
+/**
+ Initialize the state information for the Watchdog Timer Architectural Protocol.
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+EFIAPI
+GtiWdtInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle = NULL;
+ FDT_HANDLE SclkHandle = 0;
+ FDT_HANDLE RootHandle = 0;
+ CONST UINT32 *SclkFreq = NULL;
+ FDT_CLIENT_PROTOCOL *FdtClient = NULL;
+ CONST CHAR8 *Platform;
+
+ DEBUG ((DEBUG_INFO, "GtiWdtInitialize: Start\n"));
+ // Stop the watchdog from triggering unexpectedly
+ GtiWdtStop ();
+
+ //
+ // Make sure the Watchdog Timer Architectural Protocol has not been installed in the system yet.
+ // This will avoid conflicts with the universal watchdog
+ //
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiWatchdogTimerArchProtocolGuid);
+
+ Status = gBS->LocateProtocol (&gFdtClientProtocolGuid,
+ NULL,
+ (VOID **)&FdtClient);
+
+ if (EFI_ERROR (Status) || (FdtClient == NULL)) {
+ DEBUG ((DEBUG_ERROR, "%a: ERROR: cannot locate: gFdtClientProtocolGuid\n", __func__));
+ return EFI_ABORTED;
+ }
+
+ Status = FdtClient->GetNode (FdtClient, "/soc@0/sclk", &SclkHandle);
+ if (EFI_ERROR (Status) || !SclkHandle) {
+ DEBUG ((DEBUG_ERROR, "%a: %s node not found!\n", __func__, L"/soc@0/sclk"));
+ return EFI_NOT_FOUND;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a: Found: %s\n", __func__, L"/soc@0/sclk"));
+ Status = FdtClient->GetNodeProperty (FdtClient,
+ SclkHandle,
+ "clock-frequency",
+ (CONST VOID **)&SclkFreq,
+ NULL);
+ if (EFI_ERROR (Status) || NULL == SclkFreq) {
+ DEBUG ((DEBUG_ERROR, "%a: %s property not found!\n", __func__, L"\"clock-frequency\""));
+ return EFI_NO_MAPPING;
+ }
+
+ mSclk = FdtToCpu32(*SclkFreq);
+ DEBUG ((DEBUG_INFO, "%a: DT sclk = %d Mhz (0x%x)\n", __func__, mSclk/1000000, mSclk));
+
+ Status = FdtClient->GetNode (FdtClient, "/soc@0", &RootHandle);
+ if (!EFI_ERROR (Status) && RootHandle) {
+ Status = FdtClient->GetNodeProperty (FdtClient,
+ RootHandle,
+ "runplatform",
+ (CONST VOID **)&Platform,
+ NULL);
+ if (!EFI_ERROR (Status)) {
+ if (AsciiStrCmp (Platform, "HW_PLATFORM")) {
+ mHardwarePlatform = FALSE;
+ DEBUG ((DEBUG_INFO, "%a: Not a hardware platform\n", __func__));
+ }
+ }
+ }
+
+ // Register for an ExitBootServicesEvent
+ Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES,
+ TPL_NOTIFY,
+ GtiExitBootServices,
+ NULL,
+ &mGtiExitBootServicesEvent);
+ ASSERT_EFI_ERROR(Status);
+
+ // Install the Timer Architectural Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gEfiWatchdogTimerArchProtocolGuid, &gWatchdogTimer,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ DEBUG ((DEBUG_INFO, "GtiWdtInitialize: Exit\n"));
+
+ return EFI_SUCCESS;
+}
diff --git a/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf
new file mode 100644
index 0000000000..f9aa4da246
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf
@@ -0,0 +1,45 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2022 Marvell
+#
+# Module definition file for Marvell Watchdog driver.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = GtiWatchdogDxe
+ FILE_GUID = 789F5711-6FD3-4170-BE11-EE4000037EA8
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = GtiWdtInitialize
+
+[Sources.common]
+ GtiWatchdog.c
+
+[Packages]
+ Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
+ PcdLib
+ UefiLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[FixedPcd]
+ gMarvellSiliconTokenSpaceGuid.PcdGtiWatchdogBase64
+
+[Protocols]
+ gEfiWatchdogTimerArchProtocolGuid #PRODUCES
+ gFdtClientProtocolGuid #CONSUMED
+
+[Depex]
+ gFdtClientProtocolGuid
diff --git a/Silicon/Marvell/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S b/Silicon/Marvell/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
new file mode 100644
index 0000000000..757c032f84
--- /dev/null
+++ b/Silicon/Marvell/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
@@ -0,0 +1,86 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2023 Marvell
+*
+* Source file for Marvell ARM Platform library
+* Based on ArmPlatformPkg/Library/ArmPlatformLibNull
+**/
+
+#include <AsmMacroIoLibV8.h>
+#include <Base.h>
+#include <Library/ArmLib.h>
+#include <Library/PcdLib.h>
+#include <AutoGen.h>
+#include <Library/SmcLib.h>
+
+/* x1 - node number
+ */
+
+.text
+.align 2
+
+GCC_ASM_EXPORT(ArmPlatformPeiBootAction)
+GCC_ASM_EXPORT(ArmPlatformIsPrimaryCore)
+GCC_ASM_EXPORT(ArmPlatformGetPrimaryCoreMpId)
+GCC_ASM_EXPORT(ArmPlatformGetCorePosition)
+GCC_ASM_EXPORT(ArmGetCpuCountPerCluster)
+
+GCC_ASM_IMPORT(mSystemMemoryEnd)
+
+ASM_FUNC(ArmPlatformPeiBootAction)
+ adr x1, PrimaryCoreMpid
+ str w0, [x1]
+ ldr x0, =MV_SMC_ID_DRAM_SIZE
+ mov x1, xzr
+ smc #0
+ sub x0, x0, #1 // Last valid address
+ adr x1, mSystemMemoryEnd
+ str x0, [x1] // Set mSystemMemoryEnd
+
+ ret
+
+
+//UINTN
+//ArmPlatformGetPrimaryCoreMpId (
+// VOID
+// );
+ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
+ MOV32(w0, FixedPcdGet32(PcdArmPrimaryCore))
+ ret
+
+//UINTN
+//ArmPlatformIsPrimaryCore (
+// IN UINTN MpId
+// );
+ASM_FUNC(ArmPlatformIsPrimaryCore)
+ MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCoreMask))
+ and x0, x0, x1
+ MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCore))
+ cmp w0, w1
+ mov x0, #1
+ mov x1, #0
+ csel x0, x0, x1, eq
+ ret
+
+//UINTN
+//ArmPlatformGetCorePosition (
+// IN UINTN MpId
+// );
+ASM_FUNC(ArmPlatformGetCorePosition)
+/*
+ Affinity Level 0: single thread 0
+ Affinity Level 1: clustering 0(
+ Affinity Level 2: number of clusters up to 64 (CN10K)/ 80 (Odyssey)/ 16 (Iliad)
+ Affinity Level 3: number of chip 0
+ LinearId = Aff2
+*/
+ and x0, x0, #ARM_CORE_AFF2
+ lsr x0, x0, #16
+ ret
+
+ASM_FUNCTION_REMOVE_IF_UNREFERENCED
+
+PrimaryCoreMpid: .word 0x0
diff --git a/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.c b/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.c
new file mode 100644
index 0000000000..ed48a00950
--- /dev/null
+++ b/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.c
@@ -0,0 +1,79 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2022 Marvell
+*
+* Source file for Marvell ARM Platform library
+* Based on ArmPlatformPkg/Library/ArmPlatformLibNull
+**/
+
+#include <Uefi.h>
+#include <Pi/PiBootMode.h> // EFI_BOOT_MODE
+#include <Pi/PiPeiCis.h> // EFI_PEI_PPI_DESCRIPTOR
+#include <Library/DebugLib.h> // ASSERT
+#include <Library/ArmPlatformLib.h> // ArmPlatformIsPrimaryCore
+#include <Ppi/ArmMpCoreInfo.h> // ARM_MP_CORE_INFO_PPI
+
+/**
+ Return the current Boot Mode
+
+ This function returns the boot reason on the platform
+
+ @return Return the current Boot Mode of the platform
+
+**/
+EFI_BOOT_MODE
+ArmPlatformGetBootMode (
+ VOID
+ )
+{
+ return BOOT_WITH_FULL_CONFIGURATION;
+}
+
+/**
+ Initialize controllers that must setup in the normal world
+
+ This function is called by the ArmPlatformPkg/PrePei or ArmPlatformPkg/Pei/PlatformPeim
+ in the PEI phase.
+
+**/
+RETURN_STATUS
+ArmPlatformInitialize (
+ IN UINTN MpId
+ )
+{
+ ASSERT(ArmPlatformIsPrimaryCore (MpId));
+
+ return RETURN_SUCCESS;
+}
+
+EFI_STATUS
+PrePeiCoreGetMpCoreInfo (
+ OUT UINTN *CoreCount,
+ OUT ARM_CORE_INFO **ArmCoreTable
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
+
+EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
+ {
+ EFI_PEI_PPI_DESCRIPTOR_PPI,
+ &gArmMpCoreInfoPpiGuid,
+ &mMpCoreInfoPpi
+ }
+};
+
+VOID
+ArmPlatformGetPlatformPpiList (
+ OUT UINTN *PpiListSize,
+ OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
+ )
+{
+ *PpiListSize = sizeof(gPlatformPpiTable);
+ *PpiList = gPlatformPpiTable;
+}
diff --git a/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.inf b/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.inf
new file mode 100644
index 0000000000..1a4b81adb4
--- /dev/null
+++ b/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLib.inf
@@ -0,0 +1,55 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2022 Marvell
+#
+# Marvell ARM Platform library
+# Based on ArmPlatformPkg/Library/ArmPlatformLibNull
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ArmPlatformLib
+ FILE_GUID = 7ea0f45b-0e06-4e45-8353-9c28b091a11c
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ArmPlatformLib
+
+[Packages]
+ MdePkg/MdePkg.dec
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec # Include ArmPlatformLib.h
+ Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
+
+[LibraryClasses]
+ ArmLib
+ HobLib
+ DebugLib
+ MemoryAllocationLib
+ SmcLib
+
+[Sources]
+ ArmPlatformLib.c
+ ArmPlatformLibMem.c
+
+[Sources.AARCH64]
+ AArch64/ArmPlatformHelper.S
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFdBaseAddress
+ gArmTokenSpaceGuid.PcdFdSize
+ gArmTokenSpaceGuid.PcdSystemMemoryBase
+ gArmTokenSpaceGuid.PcdSystemMemorySize
+ gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
+ gArmTokenSpaceGuid.PcdArmPrimaryCore
+
+ gMarvellSiliconTokenSpaceGuid.PcdNodeDramBase
+ gMarvellSiliconTokenSpaceGuid.PcdIoBaseAddress
+ gMarvellSiliconTokenSpaceGuid.PcdNodeIoBaseAddress
+ gMarvellSiliconTokenSpaceGuid.PcdIoSize
+
+[Ppis]
+ gArmMpCoreInfoPpiGuid
diff --git a/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLibMem.c b/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLibMem.c
new file mode 100644
index 0000000000..1626dea6c5
--- /dev/null
+++ b/Silicon/Marvell/Library/ArmPlatformLib/ArmPlatformLibMem.c
@@ -0,0 +1,131 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2022 Marvell
+*
+* Source file for Marvell ARM Platform library
+* Based on ArmPlatformPkg/Library/ArmPlatformLibNull
+**/
+
+#include <Uefi.h> // Basic UEFI types
+#include <Library/DebugLib.h> // DEBUG
+#include <Pi/PiBootMode.h> // EFI_BOOT_MODE required by PiHob.h
+#include <Pi/PiHob.h> // EFI_RESOURCE_ATTRIBUTE_TYPE
+#include <Library/HobLib.h> // BuildResourceDescriptorHob
+#include <Library/PcdLib.h> // PcdGet64
+#include <Library/ArmLib.h> // ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
+#include <Library/SmcLib.h> // SmcGetRamSize
+#include <Library/MemoryAllocationLib.h> // AllocatePages
+
+// Number of Virtual Memory Map Descriptors
+#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 129
+#define MAX_NODES 1
+
+// DDR attributes
+#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
+#define DDR_ATTRIBUTES_UNCACHED ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED
+
+/**
+ Return the Virtual Memory Map of your platform
+
+ This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU on your platform.
+
+ @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR describing a Physical-to-
+ Virtual Memory mapping. This array must be ended by a zero-filled
+ entry
+
+**/
+VOID
+ArmPlatformGetVirtualMemoryMap (
+ IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap
+ )
+{
+ ARM_MEMORY_REGION_ATTRIBUTES CacheAttributes;
+ ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable;
+ UINT64 VirtualMemoryTableSize;
+ UINT64 MemoryBase;
+ UINT64 MemorySize;
+ UINTN Index = 0;
+ UINTN Node;
+ EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes;
+
+ ASSERT (VirtualMemoryMap != NULL);
+
+ VirtualMemoryTableSize = sizeof(ARM_MEMORY_REGION_DESCRIPTOR) * MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS;
+ VirtualMemoryTable = AllocatePages (EFI_SIZE_TO_PAGES (VirtualMemoryTableSize));
+
+ if (VirtualMemoryTable == NULL) {
+ return;
+ }
+
+ CacheAttributes = DDR_ATTRIBUTES_CACHED;
+
+ ResourceAttributes =
+ EFI_RESOURCE_ATTRIBUTE_PRESENT |
+ EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+ EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_TESTED;
+
+
+ VirtualMemoryTable[Index].PhysicalBase = PcdGet64(PcdFdBaseAddress);
+ VirtualMemoryTable[Index].VirtualBase = PcdGet64(PcdFdBaseAddress);
+ VirtualMemoryTable[Index].Length = PcdGet32(PcdFdSize);
+ VirtualMemoryTable[Index].Attributes = CacheAttributes;
+ Index++;
+
+ BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY,
+ ResourceAttributes,
+ PcdGet64 (PcdFdBaseAddress),
+ PcdGet32 (PcdFdSize));
+
+ for (Node = 0; Node < MAX_NODES; Node++) {
+ MemoryBase = Node * FixedPcdGet64(PcdNodeDramBase);
+ MemorySize = SmcGetRamSize(Node);
+
+ MemoryBase += (Node == 0) ? PcdGet64(PcdSystemMemoryBase) : 0;
+ MemorySize -= (Node == 0) ? PcdGet64(PcdSystemMemoryBase) : 0;
+
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ ResourceAttributes,
+ MemoryBase,
+ MemorySize);
+
+ DEBUG ((DEBUG_LOAD | DEBUG_INFO, "Memory %lx @ %lx\n", MemorySize, MemoryBase));
+ VirtualMemoryTable[Index].PhysicalBase = MemoryBase;
+ VirtualMemoryTable[Index].VirtualBase = MemoryBase;
+ VirtualMemoryTable[Index].Length = MemorySize;
+ VirtualMemoryTable[Index].Attributes = CacheAttributes;
+
+ Index++;
+ }
+
+ for (Node = 0; Node < MAX_NODES; Node++) {
+ VirtualMemoryTable[Index].PhysicalBase = FixedPcdGet64(PcdIoBaseAddress) +
+ Node * FixedPcdGet64(PcdNodeIoBaseAddress);
+ VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64(PcdIoBaseAddress) +
+ Node * FixedPcdGet64(PcdNodeIoBaseAddress);
+ VirtualMemoryTable[Index].Length = FixedPcdGet64(PcdIoSize);
+ VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+
+ DEBUG ((DEBUG_LOAD | DEBUG_INFO,
+ "IO %lx @ %lx\n",
+ VirtualMemoryTable[Index].Length,
+ VirtualMemoryTable[Index].PhysicalBase));
+
+ Index++;
+ }
+
+ // End of Table
+ VirtualMemoryTable[Index].PhysicalBase = 0;
+ VirtualMemoryTable[Index].VirtualBase = 0;
+ VirtualMemoryTable[Index].Length = 0;
+ VirtualMemoryTable[Index].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0;
+
+ *VirtualMemoryMap = VirtualMemoryTable;
+}
diff --git a/Silicon/Marvell/Library/SmcLib/SmcLib.c b/Silicon/Marvell/Library/SmcLib/SmcLib.c
new file mode 100644
index 0000000000..0b6970db9f
--- /dev/null
+++ b/Silicon/Marvell/Library/SmcLib/SmcLib.c
@@ -0,0 +1,189 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2023 Marvell
+*
+* Source file for Marvell SMC Interface
+*
+**/
+
+#include <Library/SmcLib.h> // MV_SMC_ID_NODE_COUNT
+#include <Library/ArmSmcLib.h> // ArmCallSmc
+#include <Library/PrintLib.h> // AsciiVSPrint
+#include <IndustryStandard/ArmStdSmc.h> // SMCCC_ARCH_SOC_ID
+#include <Library/DebugLib.h>
+UINTN EFIAPI SmcPciEnumComplete (IN UINTN PemInfo)
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ ArmSmcArgs.Arg0 = MV_SMC_ID_PCIE_ENUM_DONE;
+ ArmSmcArgs.Arg1 = PemInfo;
+ ArmSmcArgs.Arg2 = 0;
+ ArmSmcArgs.Arg3 = 0;
+ ArmCallSmc(&ArmSmcArgs);
+
+ return ArmSmcArgs.Arg0;
+}
+
+UINTN SmcGetNodeCount (VOID)
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ ArmSmcArgs.Arg0 = MV_SMC_ID_NODE_COUNT;
+ ArmCallSmc (&ArmSmcArgs);
+
+ return ArmSmcArgs.Arg0;
+}
+
+UINTN SmcGetRamSize ( IN UINTN Node )
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ ArmSmcArgs.Arg0 = MV_SMC_ID_DRAM_SIZE;
+ ArmSmcArgs.Arg1 = Node;
+ ArmCallSmc (&ArmSmcArgs);
+
+ return ArmSmcArgs.Arg0;
+}
+
+UINTN EFIAPI SmcGetRvuRamSize (
+ IN UINT64 *Address,
+ IN UINT64 *Size )
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ ArmSmcArgs.Arg0 = MV_SMC_ID_RVU_RSVD_REG_INFO;
+ ArmCallSmc (&ArmSmcArgs);
+
+ *Address = ArmSmcArgs.Arg1;
+ *Size = ArmSmcArgs.Arg2;
+
+ return ArmSmcArgs.Arg0;
+}
+
+UINTN EFIAPI SmcDebugPrint (
+ IN CONST CHAR8 *FormatString,
+ ...
+ )
+{
+ CHAR8 StringBuffer[256];
+ VA_LIST Marker;
+ UINTN NumberOfPrinted,
+ Index;
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ VA_START (Marker, FormatString);
+
+ NumberOfPrinted = AsciiVSPrint (StringBuffer,
+ sizeof(StringBuffer),
+ FormatString,
+ Marker);
+ VA_END (Marker);
+
+ Index = 0;
+
+ while (StringBuffer[Index] != '\0') {
+ ArmSmcArgs.Arg0 = MV_SMC_ID_PUTC;
+ ArmSmcArgs.Arg1 = StringBuffer[Index];
+ ArmCallSmc (&ArmSmcArgs);
+ }
+
+ return NumberOfPrinted;
+}
+
+UINTN EFIAPI SmcShutdownRvu(VOID)
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ ArmSmcArgs.Arg0 = MV_SMC_ID_DISABLE_RVU_LFS;
+ ArmCallSmc(&ArmSmcArgs);
+
+ return ArmSmcArgs.Arg0;
+}
+
+UINTN EFIAPI SmcBootSuccess(VOID)
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ ArmSmcArgs.Arg0 = MV_SMC_ID_FSAFE_BOOT_SUCCESS;
+ ArmCallSmc(&ArmSmcArgs);
+
+ return ArmSmcArgs.Arg0;
+}
+
+/**
+ Update firmware image in SPI NOR flash
+
+ @param[in] Buffer - Pointer to buffer that contains firmware image
+ @param[in] Size - Size of the buffer
+
+ @retval 0 - EFI_SUCCESS
+ @retval -1 - Invalid arguments
+ @retval -2 - SPI_CONFIG_ERR
+ @retval -3 - SPI_MMAP_ERR
+ @retval -4 - SPI_IMG_VALIDATE_ERR
+ @retval -5 - SPI_IMG_UPDATE_ERR
+
+**/
+UINTN EFIAPI SmcSpiSecureUpdate (
+ IN VOID *Buffer,
+ IN UINTN Size
+)
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+
+ ArmSmcArgs.Arg0 = MV_SMC_ID_SPI_SECURE_UPDATE;
+ ArmSmcArgs.Arg1 = (UINTN) Buffer;
+ ArmSmcArgs.Arg2 = Size;
+ ArmSmcArgs.Arg3 = 0;
+ ArmCallSmc(&ArmSmcArgs);
+
+ return ArmSmcArgs.Arg0;
+}
+
+// Below function definition based on SmbiosGetSmcArm64SocId() from:
+// boot/uefi/ArmPkg/Universal/Smbios/ProcessorSubClassDxe/SmbiosProcessorArmCommon.c
+
+/** Fetches the JEP106 code and SoC Revision.
+
+ @param Jep106Code JEP 106 code.
+ @param SocRevision SoC revision.
+
+ @retval EFI_SUCCESS Succeeded.
+ @retval EFI_UNSUPPORTED Failed.
+**/
+EFI_STATUS
+GetSmcArm64SocId (
+ OUT INT32 *Jep106Code,
+ OUT INT32 *SocRevision
+ )
+{
+ INT32 SmcCallStatus;
+ EFI_STATUS Status;
+ UINTN SmcParam;
+
+ Status = EFI_SUCCESS;
+
+ SmcParam = 0; // Get SoC Version
+ SmcCallStatus = ArmCallSmc1 (SMCCC_ARCH_SOC_ID, &SmcParam, NULL, NULL);
+
+ if (SmcCallStatus >= 0) {
+ *Jep106Code = SmcCallStatus;
+ } else {
+ Status = EFI_UNSUPPORTED;
+ }
+
+ SmcParam = 1; // Get SoC Revision
+ SmcCallStatus = ArmCallSmc1 (SMCCC_ARCH_SOC_ID, &SmcParam, NULL, NULL);
+
+ if (SmcCallStatus >= 0) {
+ *SocRevision = SmcCallStatus;
+ } else {
+ Status = EFI_UNSUPPORTED;
+ }
+ DEBUG ((DEBUG_INFO, "%a: Status = %r Ver = 0x%x, Rev = 0x%x\n",
+ __func__, Status, *Jep106Code, *SocRevision));
+ return Status;
+}
diff --git a/Silicon/Marvell/Library/SmcLib/SmcLib.inf b/Silicon/Marvell/Library/SmcLib/SmcLib.inf
new file mode 100644
index 0000000000..5053982366
--- /dev/null
+++ b/Silicon/Marvell/Library/SmcLib/SmcLib.inf
@@ -0,0 +1,32 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2023 Marvell
+#
+# Marvell SMC Interface library
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SmcLib
+ FILE_GUID = fee427a7-816a-4636-bb81-a640c8288f28
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = SmcLib
+
+[Sources]
+ SmcLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+
+ MdePkg/MdePkg.dec
+ Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
+
+[LibraryClasses]
+ PrintLib
+ ArmSmcLib
+ DebugLib
diff --git a/Silicon/Marvell/MarvellSiliconPkg/Include/Library/SmcLib.h b/Silicon/Marvell/MarvellSiliconPkg/Include/Library/SmcLib.h
new file mode 100644
index 0000000000..b8f5592295
--- /dev/null
+++ b/Silicon/Marvell/MarvellSiliconPkg/Include/Library/SmcLib.h
@@ -0,0 +1,71 @@
+/** @file
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+* https://spdx.org/licenses
+*
+* Copyright (C) 2023 Marvell
+*
+* Header file for for Marvell SMC Interface
+*
+**/
+
+#ifndef __MV_SMCLIB_H__
+#define __MV_SMCLIB_H__
+
+/* SMC function IDs for Marvell Service queries */
+
+#define MV_SMC_ID_CALL_COUNT 0xc200ff00
+#define MV_SMC_ID_UID 0xc200ff01
+
+#define MV_SMC_ID_VERSION 0xc200ff03
+
+/* x1 - node number */
+#define MV_SMC_ID_DRAM_SIZE 0xc2000301
+
+#define MV_SMC_ID_NODE_COUNT 0xc2000601
+
+/* x1 - character to print */
+#define MV_SMC_ID_PUTC 0xc2000a01
+
+#define MV_SMC_ID_DISABLE_RVU_LFS 0xc2000b01
+
+#define MV_SMC_ID_RVU_RSVD_REG_INFO 0xc2000b07
+
+#define MV_SMC_ID_FSAFE_BOOT_SUCCESS 0xc2000b02
+
+#define MV_SMC_ID_SPI_SECURE_UPDATE 0xc2000b05
+
+#define MV_SMC_ID_PCIE_ENUM_DONE 0xc2000c01
+
+UINTN SmcGetNodeCount (VOID);
+
+UINTN SmcGetRamSize (IN UINTN Node);
+
+UINTN EFIAPI SmcGetRvuRamSize (
+ IN UINT64 *Address,
+ IN UINT64 *Size
+);
+
+UINTN EFIAPI SmcDebugPrint (
+ IN CONST CHAR8 *FormatString,
+ ...
+);
+
+UINTN EFIAPI SmcShutdownRvu (VOID);
+
+UINTN EFIAPI SmcBootSuccess(VOID);
+
+UINTN EFIAPI SmcSpiSecureUpdate (
+ IN VOID *Buffer,
+ IN UINTN Size
+);
+
+UINTN EFIAPI SmcPciEnumComplete (IN UINTN PemInfo);
+
+EFI_STATUS
+GetSmcArm64SocId (
+ OUT INT32 *Jep106Code,
+ OUT INT32 *SocRevision
+ );
+
+#endif
diff --git a/Silicon/Marvell/MarvellSiliconPkg/Include/Protocol/FdtClient.h b/Silicon/Marvell/MarvellSiliconPkg/Include/Protocol/FdtClient.h
new file mode 100644
index 0000000000..dd9af0bf8f
--- /dev/null
+++ b/Silicon/Marvell/MarvellSiliconPkg/Include/Protocol/FdtClient.h
@@ -0,0 +1,180 @@
+/** @file
+
+ DISCLAIMER: the FDT_CLIENT_PROTOCOL introduced here is a work in progress,
+ and should not be used outside of the EDK II tree.
+
+ Copyright (C) 2023 Marvell
+ Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __FDT_CLIENT_H__
+#define __FDT_CLIENT_H__
+
+#define FDT_CLIENT_PROTOCOL_GUID { \
+ 0xE11FACA0, 0x4710, 0x4C8E, {0xA7, 0xA2, 0x01, 0xBA, 0xA2, 0x59, 0x1B, 0x4C} \
+ }
+
+#define FdtToCpu32(Value) SwapBytes32(Value)
+#define CpuToFdt32(Value) SwapBytes32(Value)
+
+#define FdtToCpu64(Value) SwapBytes64(Value)
+#define CpuToFdt64(Value) SwapBytes64(Value)
+
+//
+// Protocol interface structure
+//
+typedef int FDT_HANDLE;
+#define FDT_START_HANDLE -1
+typedef struct _FDT_CLIENT_PROTOCOL FDT_CLIENT_PROTOCOL;
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_NODE_PROPERTY) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ IN CONST CHAR8 *PropertyName,
+ OUT CONST VOID **Prop,
+ OUT UINT32 *PropSize OPTIONAL
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_SET_NODE_PROPERTY) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ IN CONST CHAR8 *PropertyName,
+ IN CONST VOID *Prop,
+ IN UINT32 PropSize
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_FIND_COMPATIBLE_NODE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST CHAR8 *CompatibleString,
+ IN FDT_HANDLE PrevNode,
+ OUT FDT_HANDLE *Node
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_FIND_COMPATIBLE_NODE_PROPERTY) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST CHAR8 *CompatibleString,
+ IN CONST CHAR8 *PropertyName,
+ OUT CONST VOID **Prop,
+ OUT UINT32 *PropSize OPTIONAL
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_OR_INSERT_CHOSEN_NODE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ OUT FDT_HANDLE *Node
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_NODE_DEPTH) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ OUT FDT_HANDLE *Depth
+);
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_PARENT_NODE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN FDT_HANDLE Node,
+ OUT FDT_HANDLE *Parent
+);
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_NODE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST CHAR8 *Path,
+ OUT FDT_HANDLE *Node
+);
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_NODE_PATH) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Node,
+ OUT CHAR8 *Path,
+ IN INT32 Size
+);
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_NODE_BY_PROPERTY_VALUE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE StartNode,
+ IN CHAR8 *Property,
+ IN VOID *Value,
+ IN INT32 Size,
+ OUT FDT_HANDLE *Node
+);
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_SUBNODE_BY_PROPERTY_VALUE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Parent,
+ IN CHAR8 *PropertyName,
+ IN VOID *PropertyValue,
+ IN INT32 PropertyLength,
+ OUT FDT_HANDLE *Node
+);
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_NODE_BY_PHANDLE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE PHandle,
+ OUT FDT_HANDLE *Node
+);
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_FIRST_SUBNODE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Parent,
+ OUT FDT_HANDLE *Node
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *FDT_CLIENT_GET_NEXT_SUBNODE) (
+ IN FDT_CLIENT_PROTOCOL *This,
+ IN CONST FDT_HANDLE Subnode,
+ OUT FDT_HANDLE *Next
+ );
+
+struct _FDT_CLIENT_PROTOCOL {
+ FDT_CLIENT_GET_NODE_PROPERTY GetNodeProperty;
+ FDT_CLIENT_SET_NODE_PROPERTY SetNodeProperty;
+
+ FDT_CLIENT_FIND_COMPATIBLE_NODE FindCompatibleNode;
+
+ FDT_CLIENT_GET_OR_INSERT_CHOSEN_NODE GetOrInsertChosenNode;
+
+ FDT_CLIENT_GET_NODE_DEPTH GetNodeDepth;
+ FDT_CLIENT_GET_PARENT_NODE GetParentNode;
+ FDT_CLIENT_GET_NODE GetNode;
+ FDT_CLIENT_GET_NODE_PATH GetNodePath;
+ FDT_CLIENT_GET_NODE_BY_PROPERTY_VALUE GetNodeByPropertyValue;
+ FDT_CLIENT_GET_SUBNODE_BY_PROPERTY_VALUE GetSubnodeByPropertyValue;
+ FDT_CLIENT_GET_NODE_BY_PHANDLE GetNodeByPHandle;
+ FDT_CLIENT_GET_FIRST_SUBNODE GetFirstSubnode;
+ FDT_CLIENT_GET_NEXT_SUBNODE GetNextSubnode;
+
+};
+
+extern EFI_GUID gFdtClientProtocolGuid;
+
+#endif
diff --git a/Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec b/Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
index 1e17152f13..0fb46d1330 100644
--- a/Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
+++ b/Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec
@@ -42,6 +42,8 @@
# that depend on the lowlevel platform initialization having been completed
gMarvellPlatformInitCompleteProtocolGuid = { 0x465b8cf7, 0x016f, 0x4ba6, { 0xbe, 0x6b, 0x28, 0x0e, 0x3a, 0x7d, 0x38, 0x6f } }
+ gFdtClientProtocolGuid = { 0xE11FACA0, 0x4710, 0x4C8E, { 0xA7, 0xA2, 0x01, 0xBA, 0xA2, 0x59, 0x1B, 0x4C } }
+
[PcdsFixedAtBuild.common]
#Board description
gMarvellSiliconTokenSpaceGuid.PcdMaxCpCount|0x2|UINT8|0x30000072
@@ -198,6 +200,23 @@
gMarvellSiliconTokenSpaceGuid.PcdOpTeeRegionBase|0x0|UINT64|0x50000004
gMarvellSiliconTokenSpaceGuid.PcdOpTeeRegionSize|0x0|UINT32|0x50000005
+# FDT
+ # FDT configuration node to be stripped before passing to OS
+ gMarvellSiliconTokenSpaceGuid.PcdFdtConfigRootNode|"/marvell,ebf"|VOID*|0x50000090
+
+ gMarvellSiliconTokenSpaceGuid.PcdNodeDramBase|0x10000000000|UINT64|0x00000004
+ gMarvellSiliconTokenSpaceGuid.PcdIoBaseAddress|0x800000000000|UINT64|0x00000005
+ gMarvellSiliconTokenSpaceGuid.PcdNodeIoBaseAddress|0x100000000000|UINT64|0x00000006
+ gMarvellSiliconTokenSpaceGuid.PcdIoSize|0xF0000000000|UINT64|0x00000007
+
+ gMarvellSiliconTokenSpaceGuid.PcdGtiWatchdogBase64|0x802000000000|UINT64|0x00000008
+
+[PcdsFeatureFlag.common]
+ # Publish FDT to the OS as Configuration Table with gFdtTableGuid
+ gMarvellSiliconTokenSpaceGuid.PcdPublishFdt|FALSE|BOOLEAN|0x50000091
+ # Fixup the FDT or not (taken into consideration only when PcdPublishFdt = TRUE)
+ gMarvellSiliconTokenSpaceGuid.PcdFixupFdt|TRUE|BOOLEAN|0x50000092
+
[Protocols]
gMarvellBoardDescProtocolGuid = { 0xebed8738, 0xd4a6, 0x4001, { 0xa9, 0xc9, 0x52, 0xb0, 0xcb, 0x7d, 0xdb, 0xf9 }}
gMarvellEepromProtocolGuid = { 0x71954bda, 0x60d3, 0x4ef8, { 0x8e, 0x3c, 0x0e, 0x33, 0x9f, 0x3b, 0xc2, 0x2b }}
diff --git a/Silicon/Marvell/OdysseyPkg/OdysseyPkg.dsc.inc b/Silicon/Marvell/OdysseyPkg/OdysseyPkg.dsc.inc
new file mode 100644
index 0000000000..1c69ca8696
--- /dev/null
+++ b/Silicon/Marvell/OdysseyPkg/OdysseyPkg.dsc.inc
@@ -0,0 +1,394 @@
+#/** @file
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+# https://spdx.org/licenses
+#
+# Copyright (C) 2023 Marvell
+#
+# DSC include file for OdysseyPkg.
+#
+# This file can be included to platform DSC file
+# by using "!include OdysseyPkg.dsc.inc" // path relative to platform DSC file.
+#
+#**/
+
+[Defines]
+ SECURE_BOOT_ENABLE = FALSE
+ MIN_IMAGE = FALSE
+
+[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER]
+ GCC:*_*_ARM_DLINK_FLAGS = -z common-page-size=0x1000
+ GCC:*_*_AARCH64_DLINK_FLAGS = -z common-page-size=0x10000
+
+[LibraryClasses.common]
+!if $(TARGET) == RELEASE
+ DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
+!else
+ DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+!endif
+ DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
+
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+
+ UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+ DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
+ UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+ UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+ UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf
+
+ UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
+ VariableFlashInfoLib|MdeModulePkg/Library/BaseVariableFlashInfoLib/BaseVariableFlashInfoLib.inf
+
+ #
+ # Assume everything is fixed at build
+ #
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+
+ NetLib|NetworkPkg/Library/DxeNetLib/DxeNetLib.inf
+#!if $(MIN_IMAGE) == FALSE
+ # Networking Requirements
+ DpcLib|NetworkPkg/Library/DxeDpcLib/DxeDpcLib.inf
+ UdpIoLib|NetworkPkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
+ IpIoLib|NetworkPkg/Library/DxeIpIoLib/DxeIpIoLib.inf
+#!endif
+
+ # ARM Architectural Libraries
+ CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+ DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
+ CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf
+ ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
+ ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicLib.inf
+ ArmGicArchLib|ArmPkg/Library/ArmGicArchLib/ArmGicArchLib.inf
+ ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf
+ ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
+ ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerPhyCounterLib/ArmGenericTimerPhyCounterLib.inf
+ PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
+
+ # Boot manager
+ BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+ UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+ PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
+
+ # Silicon Specific Libraries
+ PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
+ # ARM PL011 UART Library
+ SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
+ PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
+
+ #
+ # Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window
+ # in the debugger will show load and unload commands for symbols. You can cut and paste this
+ # into the command window to load symbols. We should be able to use a script to do this, but
+ # the version of RVD I have does not support scripts accessing system memory.
+ #
+ #PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf
+ PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
+ #PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
+
+ DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
+ DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf
+
+ FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
+
+ # RunAxf support via Dynamic Shell Command protocol
+ # It uses the Shell libraries.
+ ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
+ FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
+ SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
+
+ #
+ # Secure Boot dependencies
+ #
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
+ OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
+ TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpmMeasurementLib.inf
+ AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+
+ # re-use the UserPhysicalPresent() dummy implementation from the ovmf tree
+ PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.inf
+!else
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+!endif
+ VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
+
+ CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+
+ # Platform Support Libraries
+ SmcLib|Silicon/Marvell/Library/SmcLib/SmcLib.inf
+
+[LibraryClasses.common.SEC]
+
+ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+ HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+ PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+
+ ArmGicArchLib|ArmPkg/Library/ArmGicArchSecLib/ArmGicArchSecLib.inf
+
+[LibraryClasses.common.PEI_CORE]
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+ PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.PEIM]
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeiResourcePublicationLib|MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+ PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.SEC, LibraryClasses.common.PEIM]
+ MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
+
+[LibraryClasses.common.DXE_CORE]
+ HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
+ MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
+ DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
+
+[LibraryClasses.common.DXE_DRIVER]
+ ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.UEFI_APPLICATION]
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.DXE_RUNTIME_DRIVER]
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ # ARM PL011 UART Runtime Library
+ #SerialPortLib|Silicon/Marvell/Library/PL011SerialPortRuntimeLib/PL011SerialPortRuntimeLib.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
+ VariablePolicyLib|MdeModulePkg/Library/VariablePolicyLib/VariablePolicyLibRuntimeDxe.inf
+!endif
+
+[LibraryClasses.AARCH64.DXE_RUNTIME_DRIVER]
+ #
+ # PSCI support in EL3 may not be available if we are not running under a PSCI
+ # compliant secure firmware, but since the default VExpress EfiResetSystemLib
+ # cannot be supported at runtime (due to the fact that the syscfg MMIO registers
+ # cannot be runtime remapped), it is our best bet to get ResetSystem functionality
+ # on these platforms.
+ #
+ EfiResetSystemLib|ArmPkg/Library/ArmPsciResetSystemLib/ArmPsciResetSystemLib.inf
+
+[LibraryClasses.ARM, LibraryClasses.AARCH64]
+ #
+ # It is not possible to prevent the ARM compiler for generic intrinsic functions.
+ # This library provides the instrinsic functions generate by a given compiler.
+ # [LibraryClasses.ARM] and NULL mean link this library into all ARM images.
+ #
+ NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+ # Add support for GCC stack protector
+ NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
+
+
+[BuildOptions]
+ RVCT:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG
+
+ GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+
+ # Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress
+ gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE
+
+ gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
+
+[PcdsFixedAtBuild.common]
+!ifdef $(FIRMWARE_VER)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"$(FIRMWARE_VER)"
+!else
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"MARVELL UEFI 5.0.0"
+!endif
+
+!ifdef $(RELEASE_DATE)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L"$(RELEASE_DATE)"
+!else
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L"2022"
+!endif
+
+ gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1 # BIT0 - Enable Performance Measurement.
+
+ # DEBUG_ASSERT_ENABLED 0x01
+ # DEBUG_PRINT_ENABLED 0x02
+ # DEBUG_CODE_ENABLED 0x04
+ # CLEAR_MEMORY_ENABLED 0x08
+ # ASSERT_BREAKPOINT_ENABLED 0x10
+ # ASSERT_DEADLOOP_ENABLED 0x20
+!if $(TARGET) == RELEASE
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21
+!else
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
+!endif
+
+ # DEBUG_INIT 0x00000001 // Initialization
+ # DEBUG_WARN 0x00000002 // Warnings
+ # DEBUG_LOAD 0x00000004 // Load events
+ # DEBUG_FS 0x00000008 // EFI File system
+ # DEBUG_POOL 0x00000010 // Alloc & Free's
+ # DEBUG_PAGE 0x00000020 // Alloc & Free's
+ # DEBUG_INFO 0x00000040 // Verbose
+ # DEBUG_DISPATCH 0x00000080 // PEI/DXE Dispatchers
+ # DEBUG_VARIABLE 0x00000100 // Variable
+ # DEBUG_BM 0x00000400 // Boot Manager
+ # DEBUG_BLKIO 0x00001000 // BlkIo Driver
+ # DEBUG_NET 0x00004000 // SNI Driver
+ # DEBUG_UNDI 0x00010000 // UNDI Driver
+ # DEBUG_LOADFILE 0x00020000 // UNDI Driver
+ # DEBUG_EVENT 0x00080000 // Event messages
+ # DEBUG_GCD 0x00100000 // Global Coherency Database changes
+ # DEBUG_CACHE 0x00200000 // Memory range cachability changes
+ # DEBUG_ERROR 0x80000000 // Error
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80304FCF
+
+ gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
+
+ # RunAxf support via Dynamic Shell Command protocol
+ # We want to use the Shell Libraries but do not want it to initialise
+ # automatically. We initialise the libraries when the command is called by the
+ # Shell.
+ gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+ # Define PcdBootManagerMenuFile as FILE_GUID of bootloader/uefi/MdeModulePkg/Application/UiApp/UiApp.inf
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
+
+ # Max capsule size
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0x1400000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x1400000
+
+ # Use MPIDR Affinity Level 2 to identify the PrimaryCore
+ # Affinity Level 2: number of clusters up to 64 (CN10K)/ 80 (Odyssey)/ 16 (Iliad)
+ gArmTokenSpaceGuid.PcdArmPrimaryCoreMask|0xFF0000
+
+[PcdsDynamicHii.common.DEFAULT]
+!if $(MIN_IMAGE) == TRUE
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|0
+!else
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|5
+!endif
+
+[Components.common]
+
+ # FV Filesystem
+ MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
+
+ # SectionExtraction
+ MdeModulePkg/Universal/SectionExtractionDxe/SectionExtractionDxe.inf {
+ <LibraryClasses>
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ }
+
+ #
+ # FDT support
+ #
+ Silicon/Marvell/Drivers/Fdt/FdtPlatformDxe/FdtPlatformDxe.inf
+ Silicon/Marvell/Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf
+
+ # No EMMC/SD Interface
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ ShellPkg/Application/Shell/Shell.inf {
+ <LibraryClasses>
+ ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2CommandsLib.inf
+ HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf
+ }
+
+ ShellPkg/DynamicCommand/DpDynamicCommand/DpDynamicCommand.inf
+ ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
+
+ #
+ # Bds
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+
+ MdeModulePkg/Application/UiApp/UiApp.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
+ }
diff --git a/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/AArch64/ModuleEntryPoint.S b/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/AArch64/ModuleEntryPoint.S
new file mode 100644
index 0000000000..481d794154
--- /dev/null
+++ b/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/AArch64/ModuleEntryPoint.S
@@ -0,0 +1,136 @@
+//
+// Copyright (c) 2011 - 2020, Arm Limited. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+//
+
+#include <AsmMacroIoLibV8.h>
+GCC_ASM_IMPORT(mDeviceTreeBaseAddress) // --- MRVL Override: defined in PrePi.c
+GCC_ASM_IMPORT(mSystemMemoryEnd) // --- MRVL Override
+ASM_FUNC(_ModuleEntryPoint)
+
+ // --- MRVL Override start
+ // Save the boot parameter to a global variable
+ adr x10, mDeviceTreeBaseAddress
+ str x1, [x10]
+ // --- MRVL Override end
+
+ // Do early platform specific actions
+ bl ASM_PFX(ArmPlatformPeiBootAction)
+
+ // Get ID of this CPU in multi-core system
+ bl ASM_PFX(ArmReadMpidr)
+ // Keep a copy of the MpId register value
+ mov x10, x0
+
+_SetSVCMode:
+// Check if we can install the stack at the top of the System Memory or if we need
+// to install the stacks at the bottom of the Firmware Device (case the FD is located
+// at the top of the DRAM)
+_SystemMemoryEndInit:
+ ldr x1, mSystemMemoryEnd
+
+ // --- MRVL Override start
+ // mSystemMemoryEnd shall be set by SMC call within ArmPlatformPeiBootAction
+ cmp x1, #0xffffffffffffffff
+ bne _SetupStackPosition
+ // if mSystemMemoryEnd wasn't gethered from SMC call, get it from PCDs
+ MOV64 (x1, FixedPcdGet64(PcdSystemMemoryBase) + FixedPcdGet64(PcdSystemMemorySize) - 1)
+
+ // Update the global variable
+ adr x2, mSystemMemoryEnd
+ str x1, [x2]
+ // --- MRVL Override end
+
+_SetupStackPosition:
+ // x1 = SystemMemoryTop
+
+ // Calculate Top of the Firmware Device
+ MOV64 (x2, FixedPcdGet64(PcdFdBaseAddress))
+ MOV32 (x3, FixedPcdGet32(PcdFdSize) - 1)
+ sub x3, x3, #1
+ add x3, x3, x2 // x3 = FdTop = PcdFdBaseAddress + PcdFdSize
+
+ // UEFI Memory Size (stacks are allocated in this region)
+ MOV32 (x4, FixedPcdGet32(PcdSystemMemoryUefiRegionSize))
+
+ //
+ // Reserve the memory for the UEFI region (contain stacks on its top)
+ //
+
+ // Calculate how much space there is between the top of the Firmware and the Top of the System Memory
+ subs x0, x1, x3 // x0 = SystemMemoryTop - FdTop
+ b.mi _SetupStack // Jump if negative (FdTop > SystemMemoryTop). Case when the PrePi is in XIP memory outside of the DRAM
+ cmp x0, x4
+ b.ge _SetupStack
+
+ // Case the top of stacks is the FdBaseAddress
+ mov x1, x2
+
+_SetupStack:
+ // x1 contains the top of the stack (and the UEFI Memory)
+
+ // Because the 'push' instruction is equivalent to 'stmdb' (decrement before), we need to increment
+ // one to the top of the stack. We check if incrementing one does not overflow (case of DRAM at the
+ // top of the memory space)
+ adds x11, x1, #1
+ b.cs _SetupOverflowStack
+
+_SetupAlignedStack:
+ mov x1, x11
+ b _GetBaseUefiMemory
+
+_SetupOverflowStack:
+ // Case memory at the top of the address space. Ensure the top of the stack is EFI_PAGE_SIZE
+ // aligned (4KB)
+ and x1, x1, ~EFI_PAGE_MASK
+
+_GetBaseUefiMemory:
+ // Calculate the Base of the UEFI Memory
+ sub x11, x1, x4
+
+_GetStackBase:
+ // r1 = The top of the Mpcore Stacks
+ // Stack for the primary core = PrimaryCoreStack
+ MOV32 (x2, FixedPcdGet32(PcdCPUCorePrimaryStackSize))
+ sub x12, x1, x2
+
+ // Stack for the secondary core = Number of Cores - 1
+ MOV32 (x1, (FixedPcdGet32(PcdCoreCount) - 1) * FixedPcdGet32(PcdCPUCoreSecondaryStackSize))
+ sub x12, x12, x1
+
+ // x12 = The base of the MpCore Stacks (primary stack & secondary stacks)
+ mov x0, x12
+ mov x1, x10
+ //ArmPlatformStackSet(StackBase, MpId, PrimaryStackSize, SecondaryStackSize)
+ MOV32 (x2, FixedPcdGet32(PcdCPUCorePrimaryStackSize))
+ MOV32 (x3, FixedPcdGet32(PcdCPUCoreSecondaryStackSize))
+ bl ASM_PFX(ArmPlatformStackSet)
+
+ // Is it the Primary Core ?
+ mov x0, x10
+ bl ASM_PFX(ArmPlatformIsPrimaryCore)
+ cmp x0, #1
+ bne _PrepareArguments
+
+_PrepareArguments:
+ mov x0, x10
+ mov x1, x11
+ mov x2, x12
+
+ // Move sec startup address into a data register
+ // Ensure we're jumping to FV version of the code (not boot remapped alias)
+ ldr x4, =ASM_PFX(CEntryPoint)
+
+ // Set the frame pointer to NULL so any backtraces terminate here
+ mov x29, xzr
+
+ // Jump to PrePiCore C code
+ // x0 = MpId
+ // x1 = UefiMemoryBase
+ // x2 = StacksBase
+ blr x4
+
+_NeverReturn:
+ b _NeverReturn
diff --git a/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PeiMPCore.inf b/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PeiMPCore.inf
new file mode 100644
index 0000000000..49d9e406d7
--- /dev/null
+++ b/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PeiMPCore.inf
@@ -0,0 +1,110 @@
+#/** @file
+#
+# (C) Copyright 2015 Hewlett-Packard Development Company, L.P.<BR>
+# Copyright (c) 2011-2017, ARM Ltd. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ArmPlatformPrePiMPCore
+ FILE_GUID = d959e387-7b91-452c-90e0-a1dbac90ddb8
+ MODULE_TYPE = SEC
+ VERSION_STRING = 1.0
+ DEFINE ORG_SOURCES_PATH = ArmPlatformPkg/PrePi # --- MRVL Override
+
+[Sources]
+ $(ORG_SOURCES_PATH)/PrePi.h # --- MRVL Override
+ PrePi.c
+ $(ORG_SOURCES_PATH)/MainMPCore.c # --- MRVL Override
+
+[Sources.ARM]
+ $(ORG_SOURCES_PATH)/Arm/ArchPrePi.c # --- MRVL Override
+ $(ORG_SOURCES_PATH)/Arm/ModuleEntryPoint.S | GCC # --- MRVL Override
+ $(ORG_SOURCES_PATH)/Arm/ModuleEntryPoint.asm | RVCT # --- MRVL Override
+
+[Sources.AArch64]
+ $(ORG_SOURCES_PATH)/AArch64/ArchPrePi.c # --- MRVL Override
+ AArch64/ModuleEntryPoint.S
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ CacheMaintenanceLib
+ DebugLib
+ DebugAgentLib
+ ArmLib
+ ArmGicLib
+ IoLib
+ TimerLib
+ SerialPortLib
+ ExtractGuidedSectionLib
+ LzmaDecompressLib
+ DebugAgentLib
+ PrePiLib
+ ArmPlatformLib
+ ArmPlatformStackLib
+ MemoryAllocationLib
+ HobLib
+ PrePiHobListPointerLib
+ PlatformPeiLib
+ MemoryInitPeiLib
+ FdtLib # --- MRVL Override
+
+[Ppis]
+ gArmMpCoreInfoPpiGuid
+
+[Guids]
+ gArmMpCoreInfoGuid
+ gEfiFirmwarePerformanceGuid
+ gFdtHobGuid # --- MRVL Override
+
+[FeaturePcd]
+ gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob
+ gArmPlatformTokenSpaceGuid.PcdSendSgiToBringUpSecondaryCores
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdVFPEnabled
+
+ gArmTokenSpaceGuid.PcdFdBaseAddress
+ gArmTokenSpaceGuid.PcdFdSize
+
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmTokenSpaceGuid.PcdFvSize
+
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize
+ gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize
+
+ gArmTokenSpaceGuid.PcdGicDistributorBase
+ gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
+ gArmTokenSpaceGuid.PcdGicSgiIntId
+
+ gArmTokenSpaceGuid.PcdSystemMemoryBase
+ gArmTokenSpaceGuid.PcdSystemMemorySize
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize
+
+ gArmPlatformTokenSpaceGuid.PcdCoreCount
+
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize
+
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData
+
diff --git a/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PrePi.c b/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PrePi.c
new file mode 100644
index 0000000000..5168881b18
--- /dev/null
+++ b/Silicon/Marvell/Override/ArmPlatformPkg/PrePi/PrePi.c
@@ -0,0 +1,238 @@
+/** @file
+
+ Copyright (c) 2011-2017, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiPei.h>
+
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/DebugAgentLib.h>
+#include <Library/PrePiLib.h>
+#include <Library/PrintLib.h>
+#include <Library/PrePiHobListPointerLib.h>
+#include <Library/TimerLib.h>
+#include <Library/PerformanceLib.h>
+
+#include <Ppi/GuidedSectionExtraction.h>
+#include <Ppi/ArmMpCoreInfo.h>
+#include <Ppi/SecPerformance.h>
+
+#include "PrePi.h"
+#include <libfdt.h> // fdt_totalsize // --- MRVL Override
+
+#define IS_XIP() (((UINT64)FixedPcdGet64 (PcdFdBaseAddress) > mSystemMemoryEnd) ||\
+ ((FixedPcdGet64 (PcdFdBaseAddress) + FixedPcdGet32 (PcdFdSize)) <= FixedPcdGet64 (PcdSystemMemoryBase)))
+
+UINT64 mSystemMemoryEnd = FixedPcdGet64 (PcdSystemMemoryBase) +
+ FixedPcdGet64 (PcdSystemMemorySize) - 1;
+
+UINT64 mDeviceTreeBaseAddress = 0; // --- MRVL Override
+int fdt_check_header(const void *fdt);
+
+EFI_STATUS
+GetPlatformPpi (
+ IN EFI_GUID *PpiGuid,
+ OUT VOID **Ppi
+ )
+{
+ UINTN PpiListSize;
+ UINTN PpiListCount;
+ EFI_PEI_PPI_DESCRIPTOR *PpiList;
+ UINTN Index;
+
+ PpiListSize = 0;
+ ArmPlatformGetPlatformPpiList (&PpiListSize, &PpiList);
+ PpiListCount = PpiListSize / sizeof (EFI_PEI_PPI_DESCRIPTOR);
+ for (Index = 0; Index < PpiListCount; Index++, PpiList++) {
+ if (CompareGuid (PpiList->Guid, PpiGuid) == TRUE) {
+ *Ppi = PpiList->Ppi;
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+VOID
+PrePiMain (
+ IN UINTN UefiMemoryBase,
+ IN UINTN StacksBase,
+ IN UINT64 StartTimeStamp
+ )
+{
+ EFI_HOB_HANDOFF_INFO_TABLE *HobList;
+ ARM_MP_CORE_INFO_PPI *ArmMpCoreInfoPpi;
+ UINTN ArmCoreCount;
+ ARM_CORE_INFO *ArmCoreInfoTable;
+ EFI_STATUS Status;
+ CHAR8 Buffer[500]; // --- MRVL Override
+ UINTN CharCount;
+ UINTN StacksSize;
+ FIRMWARE_SEC_PERFORMANCE Performance;
+
+ // If ensure the FD is either part of the System Memory or totally outside of the System Memory (XIP)
+ ASSERT (
+ IS_XIP () ||
+ ((FixedPcdGet64 (PcdFdBaseAddress) >= FixedPcdGet64 (PcdSystemMemoryBase)) &&
+ ((UINT64)(FixedPcdGet64 (PcdFdBaseAddress) + FixedPcdGet32 (PcdFdSize)) <= (UINT64)mSystemMemoryEnd))
+ );
+
+ // Initialize the architecture specific bits
+ ArchInitialize ();
+
+ // Initialize the Serial Port
+ SerialPortInitialize ();
+ CharCount = AsciiSPrint (
+ Buffer,
+ sizeof (Buffer),
+ "UEFI firmware (version %s built at %a on %a)\n\r",
+ (CHAR16 *)PcdGetPtr (PcdFirmwareVersionString),
+ __TIME__,
+ __DATE__
+ );
+ SerialPortWrite ((UINT8 *)Buffer, CharCount);
+
+ // Initialize the Debug Agent for Source Level Debugging
+ InitializeDebugAgent (DEBUG_AGENT_INIT_POSTMEM_SEC, NULL, NULL);
+ SaveAndSetDebugTimerInterrupt (TRUE);
+
+ // Declare the PI/UEFI memory region
+ HobList = HobConstructor (
+ (VOID *)UefiMemoryBase,
+ FixedPcdGet32 (PcdSystemMemoryUefiRegionSize),
+ (VOID *)UefiMemoryBase,
+ (VOID *)StacksBase // The top of the UEFI Memory is reserved for the stacks
+ );
+ PrePeiSetHobList (HobList);
+
+ // --- MRVL Override start
+ // Build the FDT HOB
+ ASSERT(fdt_check_header ((VOID *)mDeviceTreeBaseAddress) == 0);
+ DEBUG((DEBUG_INFO, "FDT address: %lx, size: %d\n",
+ mDeviceTreeBaseAddress,
+ fdt_totalsize((VOID *)mDeviceTreeBaseAddress)));
+
+ BuildGuidDataHob (&gFdtHobGuid, &mDeviceTreeBaseAddress, sizeof(mDeviceTreeBaseAddress));
+ // --- MRVL Override end
+
+ // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
+ Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32 (PcdSystemMemoryUefiRegionSize));
+ ASSERT_EFI_ERROR (Status);
+
+ // Create the Stacks HOB (reserve the memory for all stacks)
+ if (ArmIsMpCore ()) {
+ StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize) +
+ ((FixedPcdGet32 (PcdCoreCount) - 1) * FixedPcdGet32 (PcdCPUCoreSecondaryStackSize));
+ } else {
+ StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize);
+ }
+
+ BuildStackHob (StacksBase, StacksSize);
+
+ // TODO: Call CpuPei as a library
+ BuildCpuHob (ArmGetPhysicalAddressBits (), PcdGet8 (PcdPrePiCpuIoSize));
+
+ if (ArmIsMpCore ()) {
+ // Only MP Core platform need to produce gArmMpCoreInfoPpiGuid
+ Status = GetPlatformPpi (&gArmMpCoreInfoPpiGuid, (VOID **)&ArmMpCoreInfoPpi);
+
+ // On MP Core Platform we must implement the ARM MP Core Info PPI (gArmMpCoreInfoPpiGuid)
+ ASSERT_EFI_ERROR (Status);
+
+ // Build the MP Core Info Table
+ ArmCoreCount = 0;
+ Status = ArmMpCoreInfoPpi->GetMpCoreInfo (&ArmCoreCount, &ArmCoreInfoTable);
+ if (!EFI_ERROR (Status) && (ArmCoreCount > 0)) {
+ // Build MPCore Info HOB
+ BuildGuidDataHob (&gArmMpCoreInfoGuid, ArmCoreInfoTable, sizeof (ARM_CORE_INFO) * ArmCoreCount);
+ }
+ }
+
+ // Store timer value logged at the beginning of firmware image execution
+ Performance.ResetEnd = GetTimeInNanoSecond (StartTimeStamp);
+
+ // Build SEC Performance Data Hob
+ BuildGuidDataHob (&gEfiFirmwarePerformanceGuid, &Performance, sizeof (Performance));
+
+ // Set the Boot Mode
+ SetBootMode (ArmPlatformGetBootMode ());
+
+ // Initialize Platform HOBs (CpuHob and FvHob)
+ Status = PlatformPeim ();
+ ASSERT_EFI_ERROR (Status);
+
+ // Now, the HOB List has been initialized, we can register performance information
+ PERF_START (NULL, "PEI", NULL, StartTimeStamp);
+
+ // SEC phase needs to run library constructors by hand.
+ ProcessLibraryConstructorList ();
+
+ // Assume the FV that contains the SEC (our code) also contains a compressed FV.
+ Status = DecompressFirstFv ();
+ ASSERT_EFI_ERROR (Status);
+
+ // Load the DXE Core and transfer control to it
+ Status = LoadDxeCoreFromFv (NULL, 0);
+ ASSERT_EFI_ERROR (Status);
+}
+
+VOID
+CEntryPoint (
+ IN UINTN MpId,
+ IN UINTN UefiMemoryBase,
+ IN UINTN StacksBase
+ )
+{
+ UINT64 StartTimeStamp;
+
+ // Initialize the platform specific controllers
+ ArmPlatformInitialize (MpId);
+
+ if (ArmPlatformIsPrimaryCore (MpId) && PerformanceMeasurementEnabled ()) {
+ // Initialize the Timer Library to setup the Timer HW controller
+ TimerConstructor ();
+ // We cannot call yet the PerformanceLib because the HOB List has not been initialized
+ StartTimeStamp = GetPerformanceCounter ();
+ } else {
+ StartTimeStamp = 0;
+ }
+
+ // Data Cache enabled on Primary core when MMU is enabled.
+ ArmDisableDataCache ();
+ // Invalidate instruction cache
+ ArmInvalidateInstructionCache ();
+ // Enable Instruction Caches on all cores.
+ ArmEnableInstructionCache ();
+
+ // Define the Global Variable region when we are not running in XIP
+ if (!IS_XIP ()) {
+ if (ArmPlatformIsPrimaryCore (MpId)) {
+ if (ArmIsMpCore ()) {
+ // Signal the Global Variable Region is defined (event: ARM_CPU_EVENT_DEFAULT)
+ ArmCallSEV ();
+ }
+ } else {
+ // Wait the Primary core has defined the address of the Global Variable region (event: ARM_CPU_EVENT_DEFAULT)
+ ArmCallWFE ();
+ }
+ }
+
+ // If not primary Jump to Secondary Main
+ if (ArmPlatformIsPrimaryCore (MpId)) {
+ InvalidateDataCacheRange (
+ (VOID *)UefiMemoryBase,
+ FixedPcdGet32 (PcdSystemMemoryUefiRegionSize)
+ );
+
+ // Goto primary Main.
+ PrimaryMain (UefiMemoryBase, StacksBase, StartTimeStamp);
+ } else {
+ SecondaryMain (MpId);
+ }
+
+ // DXE Core should always load and never return
+ ASSERT (FALSE);
+}
base-commit: 787154b500434dfdcd942015fe0a7184c0d2daa9
--
2.34.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111908): https://edk2.groups.io/g/devel/message/111908
Mute This Topic: https://groups.io/mt/102895289/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [edk2-devel] [edk2-platforms PATCH 1/1] Silicon/Marvell/OdysseyPkg: New Marvell Odyssey processor
2023-11-30 15:14 [edk2-devel] [edk2-platforms PATCH 1/1] Silicon/Marvell/OdysseyPkg: New Marvell Odyssey processor Narinder Dhillon
@ 2023-12-08 16:37 ` Marcin Wojtas via groups.io
0 siblings, 0 replies; 2+ messages in thread
From: Marcin Wojtas via groups.io @ 2023-12-08 16:37 UTC (permalink / raw)
To: devel, ndhillon; +Cc: quic_llindhol, sbalcerak
Hi Narinder,
czw., 30 lis 2023 o 16:14 Narinder Dhillon <ndhillon@marvell.com> napisał(a):
>
> From: Narinder Dhillon <ndhillon@marvell.com>
>
> This patch adds support for Marvell Odyssey processor.
>
> It contains only the very basic elements needed to boot to EDK2 UiApp.
> - ARM BL31 firmware component copies EDK2 image into memory, so it is
> always executing from memory
> - There is a SMC library to get system information from BL31
> - There are drivers to get board configuration details from a device
> tree
> - There is no on-chip RTC, a dummy driver is used
> - Emulated variable storage is used for now
>
> Signed-off-by: Narinder Dhillon <ndhillon@marvell.com>
> ---
> Platform/Marvell/OdysseyPkg/OdysseyPkg.dsc | 216 ++++++++++
> Platform/Marvell/OdysseyPkg/OdysseyPkg.fdf | 304 +++++++++++++
> .../Drivers/Fdt/FdtClientDxe/FdtClientDxe.c | 382 ++++++++++++++++
> .../Drivers/Fdt/FdtClientDxe/FdtClientDxe.inf | 43 ++
> .../Drivers/Fdt/FdtPlatformDxe/FdtPlatform.c | 361 ++++++++++++++++
> .../Drivers/Fdt/FdtPlatformDxe/FdtPlatform.h | 102 +++++
> .../Fdt/FdtPlatformDxe/FdtPlatformDxe.inf | 60 +++
> .../Fdt/FdtPlatformDxe/FdtPlatformDxe.uni | 106 +++++
> .../Drivers/Fdt/FdtPlatformDxe/README.txt | 69 +++
> .../Drivers/Fdt/FdtPlatformDxe/ShellDumpFdt.c | 283 ++++++++++++
> .../Marvell/Drivers/Null/RtcNull/RtcNullDxe.c | 281 ++++++++++++
> .../Marvell/Drivers/Null/RtcNull/RtcNullDxe.h | 41 ++
> .../Drivers/Null/RtcNull/RtcNullDxe.inf | 46 ++
> .../Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c | 408 ++++++++++++++++++
> .../Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf | 45 ++
> .../AArch64/ArmPlatformHelper.S | 86 ++++
> .../Library/ArmPlatformLib/ArmPlatformLib.c | 79 ++++
> .../Library/ArmPlatformLib/ArmPlatformLib.inf | 55 +++
> .../ArmPlatformLib/ArmPlatformLibMem.c | 131 ++++++
> Silicon/Marvell/Library/SmcLib/SmcLib.c | 189 ++++++++
> Silicon/Marvell/Library/SmcLib/SmcLib.inf | 32 ++
> .../Include/Library/SmcLib.h | 71 +++
> .../Include/Protocol/FdtClient.h | 180 ++++++++
> .../MarvellSiliconPkg/MarvellSiliconPkg.dec | 19 +
> Silicon/Marvell/OdysseyPkg/OdysseyPkg.dsc.inc | 394 +++++++++++++++++
> .../PrePi/AArch64/ModuleEntryPoint.S | 136 ++++++
> .../ArmPlatformPkg/PrePi/PeiMPCore.inf | 110 +++++
> .../Override/ArmPlatformPkg/PrePi/PrePi.c | 238 ++++++++++
To ease the review, can you please split this huge commit into several
patches, e.g.:
1. Add FdtPlatfromDxe
2. Add RtcNull
3. Add Wdt
4-6. Add libraries + headers
7. Add ArmPlatformPkg
8. Add OdysseyPkg.dsc.inc
9, Add Platform/Marvell/OdysseyPkg (in the latter you may also add
some README file, see other Marvell/SolidRun platforms for reference)
Thanks,
Marcin
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#112237): https://edk2.groups.io/g/devel/message/112237
Mute This Topic: https://groups.io/mt/102895289/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-12-08 16:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-11-30 15:14 [edk2-devel] [edk2-platforms PATCH 1/1] Silicon/Marvell/OdysseyPkg: New Marvell Odyssey processor Narinder Dhillon
2023-12-08 16:37 ` Marcin Wojtas via groups.io
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox