From: Marcin Wojtas <mw@semihalf.com>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "Zeng, Star" <star.zeng@intel.com>,
eric.dong@intel.com, "Ni, Ruiyu" <ruiyu.ni@intel.com>,
edk2-devel-01 <edk2-devel@lists.01.org>,
"Tian, Feng" <feng.tian@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
Leif Lindholm <leif.lindholm@linaro.org>,
hao.a.wu@intel.com, nadavh@marvell.com,
"jsd@semihalf.com" <jsd@semihalf.com>,
Tomasz Michalec <tm@semihalf.com>
Subject: Re: [PATCH v2 2/4] MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocol
Date: Mon, 8 Oct 2018 15:17:40 +0200 [thread overview]
Message-ID: <CAPv3WKdVa0GGq1z+Tj6=Pk1jPAvMu9_xxS2xqTNaN82u0iCrgA@mail.gmail.com> (raw)
In-Reply-To: <CAKv+Gu_4jfZk-CYr57oN28jBRDgjpS1FSM-_aasAvo4+kNALYg@mail.gmail.com>
pon., 8 paź 2018 o 15:07 Ard Biesheuvel <ard.biesheuvel@linaro.org> napisał(a):
>
> On 8 October 2018 at 14:59, Marcin Wojtas <mw@semihalf.com> wrote:
> > Hi Ard,
> >
> > pon., 8 paź 2018 o 14:41 Ard Biesheuvel <ard.biesheuvel@linaro.org> napisał(a):
> >>
> >> (add MdeModulePkg maintainers)
> >>
> >> On 5 October 2018 at 15:25, Marcin Wojtas <mw@semihalf.com> wrote:
> >> > From: Tomasz Michalec <tm@semihalf.com>
> >> >
> >> > Some SD Host Controlers use different values in Host Control 2 Register
> >> > to select UHS Mode. This patch adds a new UhsSignaling type routine to
> >> > the NotifyPhase of the SdMmcOverride protocol.
> >> >
> >> > UHS signaling configuration is moved to a common, default routine
> >> > (SdMmcHcUhsSignaling), which is called when SdMmcOverride does not
> >> > cover this functionality.
> >> >
> >> > Contributed-under: TianoCore Contribution Agreement 1.1
> >> > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> >> > ---
> >> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h | 50 +++++++
> >> > MdeModulePkg/Include/Protocol/SdMmcOverride.h | 2 +
> >> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c | 153 ++++++++++++--------
> >> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 37 +++--
> >> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c | 69 +++++++++
> >> > 5 files changed, 243 insertions(+), 68 deletions(-)
> >> >
> >> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h
> >> > index e389d52..a03160d 100644
> >> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h
> >> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h
> >> > @@ -63,6 +63,39 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> >> > #define SD_MMC_HC_CTRL_VER 0xFE
> >> >
> >> > //
> >> > +// SD Host Controler bits to HOST_CTRL2 register
> >> > +//
> >> > +#define SD_MMC_HC_CTRL_UHS_MASK 0x0007
> >> > +#define SD_MMC_HC_CTRL_UHS_SDR12 0x0000
> >> > +#define SD_MMC_HC_CTRL_UHS_SDR25 0x0001
> >> > +#define SD_MMC_HC_CTRL_UHS_SDR50 0x0002
> >> > +#define SD_MMC_HC_CTRL_UHS_SDR104 0x0003
> >> > +#define SD_MMC_HC_CTRL_UHS_DDR50 0x0004
> >> > +#define SD_MMC_HC_CTRL_MMC_DDR52 0x0004
> >> > +#define SD_MMC_HC_CTRL_MMC_SDR50 0x0002
> >> > +#define SD_MMC_HC_CTRL_MMC_SDR25 0x0001
> >> > +#define SD_MMC_HC_CTRL_MMC_SDR12 0x0000
> >> > +#define SD_MMC_HC_CTRL_HS200 0x0003
> >> > +#define SD_MMC_HC_CTRL_HS400 0x0005
> >> > +
> >> > +//
> >> > +// Timing modes for uhs
> >> > +//
> >> > +typedef enum {
> >> > + SdMmcUhsSdr12,
> >> > + SdMmcUhsSdr25,
> >> > + SdMmcUhsSdr50,
> >> > + SdMmcUhsSdr104,
> >> > + SdMmcUhsDdr50,
> >> > + SdMmcMmcDdr52,
> >> > + SdMmcMmcSdr50,
> >> > + SdMmcMmcSdr25,
> >> > + SdMmcMmcSdr12,
> >> > + SdMmcMmcHs200,
> >> > + SdMmcMmcHs400,
> >> > +} SD_MMC_UHS_TIMING;
> >> > +
> >>
> >> Here, we end up with two sets of symbolic constants for the same
> >> thing, and I suppose this enum will be duplicated in your
> >> SdMmcOverride implementation?
> >>
> >
> > Why duplicated? Macros are for generic UHS_MODE_SEL field values for
> > SD and MMC in HostControl2Register.
> >
> > SD_MMC_UHS_TIMING is just a timing mode indicator, it can be used not
> > only in UhsSignaling routine (actually the next patch, with
> > SwitchClockFreqPost, use it...).
> >
> > In my SdMmcOverride implementation this enum is not duplicated,
> > because this file (SdMmcPciHci.h) is included via
> > Protocol/SdMmcOverride.h.
> >
>
> Ah ok. Please don't expose internal headers of the SD/MMC driver via
> Protocol/SdMmcOverride.h
>
OK.
> I think it should be fine to add the enum definition to
> Protocol/SdMmcOverride.h instead.
>
OK.
> But wouldn't it be much easier to have a hook for setting
> HostControl2Register that decodes the value and modifies it according
> to what the platform requires?
>
Can you please explain, how it will be different from UhsSignaling in
current shape (read required timing value and update UHS_MODE_SEL
field)?
Thanks,
Marcin
>
>
> >>
> >>
> >> > +//
> >> > // The transfer modes supported by SD Host Controller
> >> > // Simplified Spec 3.0 Table 1-2
> >> > //
> >> > @@ -508,4 +541,21 @@ SdMmcHcInitTimeoutCtrl (
> >> > IN UINT8 Slot
> >> > );
> >> >
> >> > +/**
> >> > + Set SD Host Controler control 2 registry according to selected speed.
> >> > +
> >> > + @param[in] PciIo The PCI IO protocol instance.
> >> > + @param[in] Slot The slot number of the SD card to send the command to.
> >> > + @param[in] Timing The timing to select.
> >> > +
> >> > + @retval EFI_SUCCESS The timing is set successfully.
> >> > + @retval Others The timing isn't set successfully.
> >> > +**/
> >> > +EFI_STATUS
> >> > +SdMmcHcUhsSignaling (
> >> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> >> > + IN UINT8 Slot,
> >> > + IN SD_MMC_UHS_TIMING Timing
> >> > + );
> >> > +
> >> > #endif
> >> > diff --git a/MdeModulePkg/Include/Protocol/SdMmcOverride.h b/MdeModulePkg/Include/Protocol/SdMmcOverride.h
> >> > index 178945f..25db98a 100644
> >> > --- a/MdeModulePkg/Include/Protocol/SdMmcOverride.h
> >> > +++ b/MdeModulePkg/Include/Protocol/SdMmcOverride.h
> >> > @@ -17,6 +17,7 @@
> >> > #ifndef __SD_MMC_OVERRIDE_H__
> >> > #define __SD_MMC_OVERRIDE_H__
> >> >
> >> > +#include <Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h>
> >> > #include <Protocol/SdMmcPassThru.h>
> >> >
> >> > #define EDKII_SD_MMC_OVERRIDE_PROTOCOL_GUID \
> >> > @@ -31,6 +32,7 @@ typedef enum {
> >> > EdkiiSdMmcResetPost,
> >> > EdkiiSdMmcInitHostPre,
> >> > EdkiiSdMmcInitHostPost,
> >> > + EdkiiSdMmcUhsSignaling,
> >> > } EDKII_SD_MMC_PHASE_TYPE;
> >> >
> >> > /**
> >> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
> >> > index c5fd214..05bd4a0 100755
> >> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
> >> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
> >> > @@ -740,10 +740,13 @@ EmmcSwitchToHighSpeed (
> >> > IN UINT8 BusWidth
> >> > )
> >> > {
> >> > - EFI_STATUS Status;
> >> > - UINT8 HsTiming;
> >> > - UINT8 HostCtrl1;
> >> > - UINT8 HostCtrl2;
> >> > + EFI_STATUS Status;
> >> > + UINT8 HsTiming;
> >> > + UINT8 HostCtrl1;
> >> > + SD_MMC_UHS_TIMING Timing;
> >> > + SD_MMC_HC_PRIVATE_DATA *Private;
> >> > +
> >> > + Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
> >> >
> >> > Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, IsDdr, BusWidth);
> >> > if (EFI_ERROR (Status)) {
> >> > @@ -758,27 +761,37 @@ EmmcSwitchToHighSpeed (
> >> > return Status;
> >> > }
> >> >
> >> > - //
> >> > - // Clean UHS Mode Select field of Host Control 2 reigster before update
> >> > - //
> >> > - HostCtrl2 = (UINT8)~0x7;
> >> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > - }
> >> > - //
> >> > - // Set UHS Mode Select field of Host Control 2 reigster to SDR12/25/50
> >> > - //
> >> > if (IsDdr) {
> >> > - HostCtrl2 = BIT2;
> >> > + Timing = SdMmcMmcDdr52;
> >> > } else if (ClockFreq == 52) {
> >> > - HostCtrl2 = BIT0;
> >> > + Timing = SdMmcMmcSdr50;
> >> > + } else if (ClockFreq == 26) {
> >> > + Timing = SdMmcMmcSdr25;
> >> > } else {
> >> > - HostCtrl2 = 0;
> >> > + Timing = SdMmcMmcSdr12;
> >> > }
> >> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > +
> >> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
> >> > + Status = mOverride->NotifyPhase (
> >> > + Private->ControllerHandle,
> >> > + Slot,
> >> > + EdkiiSdMmcUhsSignaling,
> >> > + &Timing
> >> > + );
> >> > + if (EFI_ERROR (Status)) {
> >> > + DEBUG ((
> >> > + DEBUG_ERROR,
> >> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
> >> > + __FUNCTION__,
> >> > + Status
> >> > + ));
> >> > + return Status;
> >> > + }
> >> > + } else {
> >> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
> >> > + if (EFI_ERROR (Status)) {
> >> > + return Status;
> >> > + }
> >> > }
> >> >
> >> > HsTiming = 1;
> >> > @@ -814,10 +827,13 @@ EmmcSwitchToHS200 (
> >> > IN UINT8 BusWidth
> >> > )
> >> > {
> >> > - EFI_STATUS Status;
> >> > - UINT8 HsTiming;
> >> > - UINT8 HostCtrl2;
> >> > - UINT16 ClockCtrl;
> >> > + EFI_STATUS Status;
> >> > + UINT8 HsTiming;
> >> > + UINT16 ClockCtrl;
> >> > + SD_MMC_UHS_TIMING Timing;
> >> > + SD_MMC_HC_PRIVATE_DATA *Private;
> >> > +
> >> > + Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
> >> >
> >> > if ((BusWidth != 4) && (BusWidth != 8)) {
> >> > return EFI_INVALID_PARAMETER;
> >> > @@ -837,21 +853,30 @@ EmmcSwitchToHS200 (
> >> > if (EFI_ERROR (Status)) {
> >> > return Status;
> >> > }
> >> > - //
> >> > - // Clean UHS Mode Select field of Host Control 2 reigster before update
> >> > - //
> >> > - HostCtrl2 = (UINT8)~0x7;
> >> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > - }
> >> > - //
> >> > - // Set UHS Mode Select field of Host Control 2 reigster to SDR104
> >> > - //
> >> > - HostCtrl2 = BIT0 | BIT1;
> >> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > +
> >> > + Timing = SdMmcMmcHs200;
> >> > +
> >> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
> >> > + Status = mOverride->NotifyPhase (
> >> > + Private->ControllerHandle,
> >> > + Slot,
> >> > + EdkiiSdMmcUhsSignaling,
> >> > + &Timing
> >> > + );
> >> > + if (EFI_ERROR (Status)) {
> >> > + DEBUG ((
> >> > + DEBUG_ERROR,
> >> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
> >> > + __FUNCTION__,
> >> > + Status
> >> > + ));
> >> > + return Status;
> >> > + }
> >> > + } else {
> >> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
> >> > + if (EFI_ERROR (Status)) {
> >> > + return Status;
> >> > + }
> >> > }
> >> > //
> >> > // Wait Internal Clock Stable in the Clock Control register to be 1 before set SD Clock Enable bit
> >> > @@ -910,9 +935,12 @@ EmmcSwitchToHS400 (
> >> > IN UINT32 ClockFreq
> >> > )
> >> > {
> >> > - EFI_STATUS Status;
> >> > - UINT8 HsTiming;
> >> > - UINT8 HostCtrl2;
> >> > + EFI_STATUS Status;
> >> > + UINT8 HsTiming;
> >> > + SD_MMC_UHS_TIMING Timing;
> >> > + SD_MMC_HC_PRIVATE_DATA *Private;
> >> > +
> >> > + Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
> >> >
> >> > Status = EmmcSwitchToHS200 (PciIo, PassThru, Slot, Rca, ClockFreq, 8);
> >> > if (EFI_ERROR (Status)) {
> >> > @@ -933,21 +961,30 @@ EmmcSwitchToHS400 (
> >> > if (EFI_ERROR (Status)) {
> >> > return Status;
> >> > }
> >> > - //
> >> > - // Clean UHS Mode Select field of Host Control 2 reigster before update
> >> > - //
> >> > - HostCtrl2 = (UINT8)~0x7;
> >> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > - }
> >> > - //
> >> > - // Set UHS Mode Select field of Host Control 2 reigster to HS400
> >> > - //
> >> > - HostCtrl2 = BIT0 | BIT2;
> >> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > +
> >> > + Timing = SdMmcMmcHs400;
> >> > +
> >> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
> >> > + Status = mOverride->NotifyPhase (
> >> > + Private->ControllerHandle,
> >> > + Slot,
> >> > + EdkiiSdMmcUhsSignaling,
> >> > + &Timing
> >> > + );
> >> > + if (EFI_ERROR (Status)) {
> >> > + DEBUG ((
> >> > + DEBUG_ERROR,
> >> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
> >> > + __FUNCTION__,
> >> > + Status
> >> > + ));
> >> > + return Status;
> >> > + }
> >> > + } else {
> >> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
> >> > + if (EFI_ERROR (Status)) {
> >> > + return Status;
> >> > + }
> >> > }
> >> >
> >> > HsTiming = 3;
> >> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> >> > index 8c93933..5645a71 100644
> >> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> >> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> >> > @@ -784,8 +784,8 @@ SdCardSetBusMode (
> >> > UINT8 BusWidth;
> >> > UINT8 AccessMode;
> >> > UINT8 HostCtrl1;
> >> > - UINT8 HostCtrl2;
> >> > UINT8 SwitchResp[64];
> >> > + SD_MMC_UHS_TIMING Timing;
> >> > SD_MMC_HC_PRIVATE_DATA *Private;
> >> >
> >> > Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
> >> > @@ -817,18 +817,23 @@ SdCardSetBusMode (
> >> > if (S18A && (Capability->Sdr104 != 0) && ((SwitchResp[13] & BIT3) != 0)) {
> >> > ClockFreq = 208;
> >> > AccessMode = 3;
> >> > + Timing = SdMmcUhsSdr104;
> >> > } else if (S18A && (Capability->Sdr50 != 0) && ((SwitchResp[13] & BIT2) != 0)) {
> >> > ClockFreq = 100;
> >> > AccessMode = 2;
> >> > + Timing = SdMmcUhsSdr50;
> >> > } else if (S18A && (Capability->Ddr50 != 0) && ((SwitchResp[13] & BIT4) != 0)) {
> >> > ClockFreq = 50;
> >> > AccessMode = 4;
> >> > + Timing = SdMmcUhsDdr50;
> >> > } else if ((SwitchResp[13] & BIT1) != 0) {
> >> > ClockFreq = 50;
> >> > AccessMode = 1;
> >> > + Timing = SdMmcUhsSdr25;
> >> > } else {
> >> > ClockFreq = 25;
> >> > AccessMode = 0;
> >> > + Timing = SdMmcUhsSdr12;
> >> > }
> >> >
> >> > Status = SdCardSwitch (PassThru, Slot, AccessMode, 0xF, 0xF, 0xF, TRUE, SwitchResp);
> >> > @@ -854,15 +859,27 @@ SdCardSetBusMode (
> >> > }
> >> > }
> >> >
> >> > - HostCtrl2 = (UINT8)~0x7;
> >> > - Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > - }
> >> > - HostCtrl2 = AccessMode;
> >> > - Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > - if (EFI_ERROR (Status)) {
> >> > - return Status;
> >> > + if (mOverride != NULL && mOverride->NotifyPhase != NULL) {
> >> > + Status = mOverride->NotifyPhase (
> >> > + Private->ControllerHandle,
> >> > + Slot,
> >> > + EdkiiSdMmcUhsSignaling,
> >> > + &Timing
> >> > + );
> >> > + if (EFI_ERROR (Status)) {
> >> > + DEBUG ((
> >> > + DEBUG_ERROR,
> >> > + "%a: SD/MMC uhs signaling notifier callback failed - %r\n",
> >> > + __FUNCTION__,
> >> > + Status
> >> > + ));
> >> > + return Status;
> >> > + }
> >> > + } else {
> >> > + Status = SdMmcHcUhsSignaling (PciIo, Slot, Timing);
> >> > + if (EFI_ERROR (Status)) {
> >> > + return Status;
> >> > + }
> >> > }
> >> >
> >> > Status = SdMmcHcClockSupply (PciIo, Slot, ClockFreq * 1000, *Capability);
> >> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> >> > index 02eb4ad..38d6202 100644
> >> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> >> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> >> > @@ -1137,6 +1137,75 @@ SdMmcHcInitHost (
> >> > }
> >> >
> >> > /**
> >> > + Set SD Host Controler control 2 registry according to selected speed.
> >> > +
> >> > + @param[in] PciIo The PCI IO protocol instance.
> >> > + @param[in] Slot The slot number of the SD card to send the command to.
> >> > + @param[in] Timing The timing to select.
> >> > +
> >> > + @retval EFI_SUCCESS The timing is set successfully.
> >> > + @retval Others The timing isn't set successfully.
> >> > +**/
> >> > +EFI_STATUS
> >> > +SdMmcHcUhsSignaling (
> >> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> >> > + IN UINT8 Slot,
> >> > + IN SD_MMC_UHS_TIMING Timing
> >> > + )
> >> > +{
> >> > + EFI_STATUS Status;
> >> > + UINT8 HostCtrl2;
> >> > +
> >> > + HostCtrl2 = (UINT8)~SD_MMC_HC_CTRL_UHS_MASK;
> >> > + Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > + if (EFI_ERROR (Status)) {
> >> > + return Status;
> >> > + }
> >> > +
> >> > + switch (Timing) {
> >> > + case SdMmcUhsSdr12:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR12;
> >> > + break;
> >> > + case SdMmcUhsSdr25:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR25;
> >> > + break;
> >> > + case SdMmcUhsSdr50:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR50;
> >> > + break;
> >> > + case SdMmcUhsSdr104:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_SDR104;
> >> > + break;
> >> > + case SdMmcUhsDdr50:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_UHS_DDR50;
> >> > + break;
> >> > + case SdMmcMmcDdr52:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_DDR52;
> >> > + break;
> >> > + case SdMmcMmcSdr50:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_SDR50;
> >> > + break;
> >> > + case SdMmcMmcSdr25:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_SDR25;
> >> > + break;
> >> > + case SdMmcMmcSdr12:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_MMC_SDR12;
> >> > + break;
> >> > + case SdMmcMmcHs200:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_HS200;
> >> > + break;
> >> > + case SdMmcMmcHs400:
> >> > + HostCtrl2 = SD_MMC_HC_CTRL_HS400;
> >> > + break;
> >> > + default:
> >> > + HostCtrl2 = 0;
> >> > + break;
> >> > + }
> >> > + Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
> >> > +
> >> > + return Status;
> >> > +}
> >> > +
> >>
> >> This function looks identical to the override that your are proposing
> >> in your platform code. Why is that? Are the values of those defines
> >> different?
> >>
> >
> > This is exactly the reason. For Xenon, MMC_HS400 and MMC_HS200 values
> > of UHS_MODE_SEL field in HostControl2Register are custom. Actually,
> > non-generic UHS_MODE_SEL values are pretty common, from what I can see
> > in the Linux code. The new callback allows overriding it. Looking
> > forward to your feedback.
> >
> > Best regards,
> > Marcin
next prev parent reply other threads:[~2018-10-08 13:17 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 13:25 [PATCH v2 0/4] SdMmcOverride extension Marcin Wojtas
2018-10-05 13:25 ` [PATCH v2 1/4] MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in NotifyPhase Marcin Wojtas
2018-10-08 12:21 ` Ard Biesheuvel
2018-10-05 13:25 ` [PATCH v2 2/4] MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocol Marcin Wojtas
2018-10-05 15:12 ` Philippe Mathieu-Daudé
2018-10-05 15:17 ` Marcin Wojtas
2018-10-08 12:41 ` Ard Biesheuvel
2018-10-08 12:59 ` Marcin Wojtas
2018-10-08 13:07 ` Ard Biesheuvel
2018-10-08 13:17 ` Marcin Wojtas [this message]
2018-10-08 13:27 ` Ard Biesheuvel
2018-10-08 13:37 ` Marcin Wojtas
2018-10-08 13:43 ` Ard Biesheuvel
2018-10-08 14:52 ` Marcin Wojtas
2018-10-08 15:10 ` Ard Biesheuvel
2018-10-09 11:22 ` Wu, Hao A
2018-10-09 11:32 ` Marcin Wojtas
2018-10-09 11:45 ` Ard Biesheuvel
2018-10-09 11:51 ` Marcin Wojtas
2018-10-11 15:43 ` Marcin Wojtas
2018-10-12 1:39 ` Wu, Hao A
2018-10-12 5:06 ` Marcin Wojtas
2018-10-12 15:55 ` Ard Biesheuvel
2018-10-12 16:04 ` Marcin Wojtas
2018-10-12 16:24 ` Ard Biesheuvel
2018-10-12 16:49 ` Marcin Wojtas
2018-11-01 7:04 ` Wu, Hao A
2018-11-02 8:21 ` Marcin Wojtas
2018-11-02 12:16 ` Marcin Wojtas
2018-11-03 2:57 ` Wu, Hao A
2018-10-05 13:25 ` [PATCH v2 3/4] MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to SdMmcOverride Marcin Wojtas
2018-10-08 12:44 ` Ard Biesheuvel
2018-11-01 7:06 ` Wu, Hao A
2018-11-02 9:39 ` Marcin Wojtas
2018-11-03 3:19 ` Wu, Hao A
2018-10-05 13:25 ` [PATCH v2 4/4] MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock frequency Marcin Wojtas
2018-10-08 12:49 ` Ard Biesheuvel
2018-11-01 7:11 ` Wu, Hao A
2018-11-02 9:52 ` Marcin Wojtas
2018-10-12 5:24 ` [PATCH v2 0/4] SdMmcOverride extension Wu, Hao A
2018-10-12 5:33 ` Marcin Wojtas
2018-10-12 12:48 ` Wu, Hao A
2018-10-12 12:50 ` Marcin Wojtas
2018-10-25 12:43 ` Marcin Wojtas
2018-10-26 7:22 ` Wu, Hao A
2018-11-01 7:11 ` Wu, Hao A
2018-11-02 10:09 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAPv3WKdVa0GGq1z+Tj6=Pk1jPAvMu9_xxS2xqTNaN82u0iCrgA@mail.gmail.com' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox